review.tizen.org Git - platform/kernel/linux-rpi.git/log

ext4: fix no-key deletion for encrypt+casefold

commit 471fbbea7ff7 ("ext4: handle casefolding with encryption") is
missing a few checks for the encryption key which are needed to
support deleting enrypted casefolded files when the key is not
present.

This bug made it impossible to delete encrypted+casefolded directories
without the encryption key, due to errors like:

    W         : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key

Repro steps in kvm-xfstests test appliance:
      mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc
      mount /vdc
      mkdir /vdc/dir
      chattr +F /vdc/dir
      keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}')
      xfs_io -c "set_encpolicy $keyid" /vdc/dir
      for i in `seq 1 100`; do
          mkdir /vdc/dir/$i
      done
      xfs_io -c "rm_enckey $keyid" /vdc
      rm -rf /vdc/dir # fails with the bug

Fixes: 471fbbea7ff7 ("ext4: handle casefolding with encryption")
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix memory leak in ext4_fill_super

Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.

If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.

This can easily be reproduced by calling an infinite loop of:

systemctl start <ext4_on_lvm>.mount, and
systemctl stop <ext4_on_lvm>.mount

... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed.

Fixes: ce40733ce93d ("ext4: Check for return value from sb_set_blocksize")
Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3")
Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.com
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: fix fast commit alignment issues

Fast commit recovery data on disk may not be aligned. So, when the
recovery code reads it, this patch makes sure that fast commit info
found on-disk is first memcpy-ed into an aligned variable before
accessing it. As a consequence of it, we also remove some macros that
could resulted in unaligned accesses.

Cc: stable@kernel.org
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed

We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553]  ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975]  ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368]  ext4_find_extent+0x300/0x330 [ext4]
[130747.335759]  ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179]  ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567]  ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995]  ext4_readpage+0x54/0x100 [ext4]
[130747.337359]  generic_file_buffered_read+0x410/0xae8
[130747.337767]  generic_file_read_iter+0x114/0x190
[130747.338152]  ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556]  __vfs_read+0x11c/0x188
[130747.338851]  vfs_read+0x94/0x150
[130747.339110]  ksys_read+0x74/0xf0

This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable).  Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix accessing uninit percpu counter variable with fast_commit

When running generic/527 with fast_commit configuration, the following
issue is seen on Power.  With fast_commit, during ext4_fc_replay()
(which can be called from ext4_fill_super()), if inode eviction
happens then it can access an uninitialized percpu counter variable.

This patch adds the check before accessing the counters in
ext4_free_inode() path.

[  321.165371] run fstests generic/527 at 2021-04-29 08:38:43
[  323.027786] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: block_validity. Quota mode: none.
[  323.618772] BUG: Unable to handle kernel data access on read at 0x1fbd80000
[  323.619767] Faulting instruction address: 0xc000000000bae78c
cpu 0x1: Vector: 300 (Data Access) at [c000000010706ef0]
    pc: c000000000bae78c: percpu_counter_add_batch+0x3c/0x100
    lr: c0000000006d0bb0: ext4_free_inode+0x780/0xb90
    pid   = 5593, comm = mount
ext4_free_inode+0x780/0xb90
ext4_evict_inode+0xa8c/0xc60
evict+0xfc/0x1e0
ext4_fc_replay+0xc50/0x20f0
do_one_pass+0xfe0/0x1350
jbd2_journal_recover+0x184/0x2e0
jbd2_journal_load+0x1c0/0x4a0
ext4_fill_super+0x2458/0x4200
mount_bdev+0x1dc/0x290
ext4_mount+0x28/0x40
legacy_get_tree+0x4c/0xa0
vfs_get_tree+0x4c/0x120
path_mount+0xcf8/0xd70
do_mount+0x80/0xd0
sys_mount+0x3fc/0x490
system_call_exception+0x384/0x3d0
system_call_common+0xec/0x278

Cc: stable@kernel.org
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/6cceb9a75c54bef8fa9696c1b08c8df5ff6169e2.1619692410.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix memory leak in ext4_mb_init_backend on error path.

Fix a memory leak discovered by syzbot when a file system is corrupted
with an illegally large s_log_groups_per_flex.

Reported-by: syzbot+aa12d6106ea4ca1b6aae@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210412073837.1686-1-phil@philpotter.co.uk
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: wipe ext4_dir_entry2 upon file deletion

Upon file deletion, zero out all fields in ext4_dir_entry2 besides rec_len.
In case sensitive data is stored in filenames, this ensures no potentially
sensitive data is left in the directory entry upon deletion. Also, wipe
these fields upon moving a directory entry during the conversion to an
htree and when splitting htree nodes.

The data wiped may still exist in the journal, but there are future
commits planned to address this.

Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Link: https://lore.kernel.org/r/20210422180834.2242353-1-leah.rumancik@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Fix occasional generic/418 failure

Eric has noticed that after pagecache read rework, generic/418 is
occasionally failing for ext4 when blocksize < pagesize. In fact, the
pagecache rework just made hard to hit race in ext4 more likely. The
problem is that since ext4 conversion of direct IO writes to iomap
framework (commit 378f32bab371), we update inode size after direct IO
write only after invalidating page cache. Thus if buffered read sneaks
at unfortunate moment like:

CPU1 - write at offset 1k CPU2 - read from offset 0
iomap_dio_rw(..., IOMAP_DIO_FORCE_WAIT);
ext4_readpage();
ext4_handle_inode_extension()

the read will zero out tail of the page as it still sees smaller inode
size and thus page cache becomes inconsistent with on-disk contents with
all the consequences.

Fix the problem by moving inode size update into end_io handler which
gets called before the page cache is invalidated.

Reported-and-tested-by: Eric Whitney <enwlinux@gmail.com>
Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20210415155417.4734-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fs: fix reporting supported extra file attributes for statx()

statx(2) notes that any attribute that is not indicated as supported
by stx_attributes_mask has no usable value. Commits 801e523796004
("fs: move generic stat response attr handling to vfs_getattr_nosec")
and 712b2698e4c02 ("fs/stat: Define DAX statx attribute") sets
STATX_ATTR_AUTOMOUNT and STATX_ATTR_DAX, respectively, without setting
stx_attributes_mask, which can cause xfstests generic/532 to fail.

Fix this in the same way as commit 1b9598c8fb99 ("xfs: fix reporting
supported extra file attributes for statx()")

Fixes: 801e523796004 ("fs: move generic stat response attr handling to vfs_getattr_nosec")
Fixes: 712b2698e4c02 ("fs/stat: Define DAX statx attribute")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: allow the dax flag to be set and cleared on inline directories

This is needed to allow generic/607 to pass for file systems with the
inline data_feature enabled, and it allows the use of file systems
where the directories use inline_data, while the files are accessed
via DAX.

Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix debug format string warning

Using no_printk() for jbd_debug() revealed two warnings:

fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:256:30: error: format '%d' expects a matching 'int' argument [-Werror=format=]
  256 |                 jbd_debug(3, "Processing fast commit blk with seq %d");
      |                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ext4/fast_commit.c: In function 'ext4_fc_replay_add_range':
fs/ext4/fast_commit.c:1732:30: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=]
1732 |                 jbd_debug(1, "Converting from %d to %d %lld",

The first one was added incorrectly, and was also missing a few newlines
in debug output, and the second one happened when the type of an
argument changed.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: d556435156b7 ("jbd2: avoid -Wempty-body warnings")
Fixes: 6db074618969 ("ext4: use BIT() macro for BH_** state bits")
Fixes: 5b849b5f96b4 ("jbd2: fast commit recovery path")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210409201211.1866633-1-arnd@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix trailing whitespace

Made suggested modifications from checkpatch in reference to ERROR:
trailing whitespace

Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20210409042035.15516-1-jack.qiu@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix various seppling typos

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/cover.1616840203.git.unixbhaskar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix error return code in ext4_fc_perform_commit()

In case of if not ext4_fc_add_tlv branch, an error return code is missing.

Cc: stable@kernel.org
Fixes: aa75f4d3daae ("ext4: main fast-commit commit path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Yihang <xuyihang@huawei.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210408070033.123047-1-xuyihang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: annotate data race in jbd2_journal_dirty_metadata()

Assertion checks in jbd2_journal_dirty_metadata() are known to be racy
but we don't want to be grabbing locks just for them. We thus recheck
them under b_state_lock only if it looks like they would fail. Annotate
the checks with data_race().

Cc: stable@kernel.org
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210406161804.20150-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: annotate data race in start_this_handle()

Access to journal->j_running_transaction is not protected by appropriate
lock and thus is racy. We are well aware of that and the code handles
the race properly. Just add a comment and data_race() annotation.

Cc: stable@kernel.org
Reported-by: syzbot+30774a6acf6a2cf6d535@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210406161804.20150-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix ext4_error_err save negative errno into superblock

Fix As write_mmp_block() so that it returns -EIO instead of 1, so that
the correct error gets saved into the superblock.

Cc: stable@kernel.org
Fixes: 54d3adbc29f0 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Liu Zhi Qiang <liuzhiqiang26@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210406025331.148343-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix error code in ext4_commit_super

We should set the error code when ext4_commit_super check argument failed.
Found in code review.
Fixes: c4be0c1dc4cdc ("filesystem freeze: add error handling of write_super_lockfs/unlockfs").
Cc: stable@kernel.org
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210402101631.561-1-changfengnan@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: always panic when errors=panic is specified

Before commit 014c9caa29d3 ("ext4: make ext4_abort() use
__ext4_error()"), the following series of commands would trigger a
panic:

1. mount /dev/sda -o ro,errors=panic test
2. mount /dev/sda -o remount,abort test

After commit 014c9caa29d3, remounting a file system using the test
mount option "abort" will no longer trigger a panic. This commit will
restore the behaviour immediately before commit 014c9caa29d3.
(However, note that the Linux kernel's behavior has not been
consistent; some previous kernel versions, including 5.4 and 4.19
similarly did not panic after using the mount option "abort".)

This also makes a change to long-standing behaviour; namely, the
following series commands will now cause a panic, when previously it
did not:

1. mount /dev/sda -o ro,errors=panic test
2. echo test > /sys/fs/ext4/sda/trigger_fs_error

However, this makes ext4's behaviour much more consistent, so this is
a good thing.

Cc: stable@kernel.org
Fixes: 014c9caa29d3 ("ext4: make ext4_abort() use __ext4_error()")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210401081903.3421208-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: delete redundant uptodate check for buffer

The buffer uptodate state has been checked in function set_buffer_uptodate,
there is no need use buffer_uptodate before calling set_buffer_uptodate and
delete it.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/1617260610-29770-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()

When CONFIG_QUOTA is enabled, if we failed to mount the filesystem due
to some error happens behind ext4_orphan_cleanup(), it will end up
triggering a after free issue of super_block. The problem is that
ext4_orphan_cleanup() will set SB_ACTIVE flag if CONFIG_QUOTA is
enabled, after we cleanup the truncated inodes, the last iput() will put
them into the lru list, and these inodes' pages may probably dirty and
will be write back by the writeback thread, so it could be raced by
freeing super_block in the error path of mount_bdev().

After check the setting of SB_ACTIVE flag in ext4_orphan_cleanup(), it
was used to ensure updating the quota file properly, but evict inode and
trash data immediately in the last iput does not affect the quotafile,
so setting the SB_ACTIVE flag seems not required[1]. Fix this issue by
just remove the SB_ACTIVE setting.

[1] https://lore.kernel.org/linux-ext4/99cce8ca-e4a0-7301-840f-2ace67c551f3@huawei.com/T/#m04990cfbc4f44592421736b504afcc346b2a7c00

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331033138.918975-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: make prefetch_block_bitmaps default

Block bitmap prefetching is needed for these allocator optimization
data structures to get populated and provide better group scanning
order. So, turn it on bu default. prefetch_block_bitmaps mount option
is now marked as removed and a new option no_prefetch_block_bitmaps is
added to disable block bitmap prefetching.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add proc files to monitor new structures

This patch adds a new file "mb_structs_summary" which allows us to see
the summary of the new allocator structures added in this
series. Here's the sample output of file:

optimize_scan: 1
max_free_order_lists:
        list_order_0_groups: 0
        list_order_1_groups: 0
        list_order_2_groups: 0
        list_order_3_groups: 0
        list_order_4_groups: 0
        list_order_5_groups: 0
        list_order_6_groups: 0
        list_order_7_groups: 0
        list_order_8_groups: 0
        list_order_9_groups: 0
        list_order_10_groups: 0
        list_order_11_groups: 0
        list_order_12_groups: 0
        list_order_13_groups: 40
fragment_size_tree:
        tree_min: 16384
        tree_max: 32768
        tree_nodes: 40

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: improve cr 0 / cr 1 group scanning

Instead of traversing through groups linearly, scan groups in specific
orders at cr 0 and cr 1. At cr 0, we want to find groups that have the
largest free order >= the order of the request. So, with this patch,
we maintain lists for each possible order and insert each group into a
list based on the largest free order in its buddy bitmap. During cr 0
allocation, we traverse these lists in the increasing order of largest
free orders. This allows us to find a group with the best available cr
0 match in constant time. If nothing can be found, we fallback to cr 1
immediately.

At CR1, the story is slightly different. We want to traverse in the
order of increasing average fragment size. For CR1, we maintain a rb
tree of groupinfos which is sorted by average fragment size. Instead
of traversing linearly, at CR1, we traverse in the order of increasing
average fragment size, starting at the most optimal group. This brings
down cr 1 search complexity to log(num groups).

For cr >= 2, we just perform the linear search as before. Also, in
case of lock contention, we intermittently fallback to linear search
even in CR 0 and CR 1 cases. This allows us to proceed during the
allocation path even in case of high contention.

There is an opportunity to do optimization at CR2 too. That's because
at CR2 we only consider groups where bb_free counter (number of free
blocks) is greater than the request extent size. That's left as future
work.

All the changes introduced in this patch are protected under a new
mount option "mb_optimize_scan".

With this patchset, following experiment was performed:

Created a highly fragmented disk of size 65TB. The disk had no
contiguous 2M regions. Following command was run consecutively for 3
times:

time dd if=/dev/urandom of=file bs=2M count=10

Here are the results with and without cr 0/1 optimizations introduced
in this patch:

|---------+------------------------------+---------------------------|
|         | Without CR 0/1 Optimizations | With CR 0/1 Optimizations |
|---------+------------------------------+---------------------------|
| 1st run | 5m1.871s                     | 2m47.642s                 |
| 2nd run | 2m28.390s                    | 0m0.611s                  |
| 3rd run | 2m26.530s                    | 0m1.255s                  |
|---------+------------------------------+---------------------------|

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add MB_NUM_ORDERS macro

A few arrays in mballoc.c use the total number of valid orders as
their size. Currently, this value is set as "sb->s_blocksize_bits +
2". This makes code harder to read. So, instead add a new macro
MB_NUM_ORDERS(sb) to make the code more readable.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add mballoc stats proc file

Add new stats for measuring the performance of mballoc. This patch is
forked from Artem Blagodarenko's work that can be found here:

https://github.com/lustre/lustre-release/blob/master/ldiskfs/kernel_patches/patches/rhel8/ext4-simple-blockalloc.patch

This patch reorganizes the stats by cr level. This is how the output
looks like:

mballoc:
reqs: 0
success: 0
groups_scanned: 0
cr0_stats:
hits: 0
groups_considered: 0
useless_loops: 0
bad_suggestions: 0
cr1_stats:
hits: 0
groups_considered: 0
useless_loops: 0
bad_suggestions: 0
cr2_stats:
hits: 0
groups_considered: 0
useless_loops: 0
cr3_stats:
hits: 0
groups_considered: 0
useless_loops: 0
extents_scanned: 0
goal_hits: 0
2^n_hits: 0
breaks: 0
lost: 0
buddies_generated: 0/40
buddies_time_used: 0
preallocated: 0
discarded: 0

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add ability to return parsed options from parse_options

Before this patch, the function parse_options() was returning
journal_devnum and journal_ioprio variables to the caller. This patch
generalizes that interface to allow parse_options to return any parsed
options to return back to the caller. In this patch series, it gets
used to capture the value of "mb_optimize_scan=%u" mount option.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: drop s_mb_bal_lock and convert protected fields to atomic

s_mb_buddies_generated gets used later in this patch series to
determine if the cr 0 and cr 1 optimziations should be performed or
not. Currently, s_mb_buddies_generated is protected under a
spin_lock. In the allocation path, it is better if we don't depend on
the lock and instead read the value atomically. In order to do that,
we drop s_bal_lock altogether and we convert the only two protected
fields by it s_mb_buddies_generated and s_mb_generation_time to atomic
type.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix check to prevent false positive report of incorrect used inodes

Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.

mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda

So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.

Cc: stable@kernel.org
Fixes: 50122847007 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

jbd2: avoid -Wempty-body warnings

Building with 'make W=1' shows a harmless -Wempty-body warning:

fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:267:75: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
267 | jbd_debug(3, "Fast commit replay failed, err = %d\n", err);
| ^

Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210322102152.95684-1-arnd@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: optimize match for casefolded encrypted dirs

Matching names with casefolded encrypting directories requires
decrypting entries to confirm case since we are case preserving. We can
avoid needing to decrypt if our hash values don't match.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210319073414.1381041-3-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: handle casefolding with encryption

This adds support for encryption with casefolding.

Since the name on disk is case preserving, and also encrypted, we can no
longer just recompute the hash on the fly. Additionally, to avoid
leaking extra information from the hash of the unencrypted name, we use
siphash via an fscrypt v2 policy.

The hash is stored at the end of the directory entry for all entries
inside of an encrypted and casefolded directory apart from those that
deal with '.' and '..'. This way, the change is backwards compatible
with existing ext4 filesystems.

[ Changed to advertise this feature via the file:
/sys/fs/ext4/features/encrypted_casefold -- TYT ]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210319073414.1381041-2-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove unnecessary braces in fs/ext4/dir.c

Removes braces to follow the coding style.

Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Link: https://lore.kernel.org/r/20210316052953.67616-1-mdjurovic@zohomail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: delete some unused tracepoint definitions

A number of tracepoint instances have been removed from ext4 by past
patches but the definitions of those tracepoints have not.

All instances of ext4_ext_in_cache and ext4_ext_put_in_cache were
removed by commit 69eb33dc24dc ("ext4: remove single extent cache").
ext4_get_reserved_cluster_alloc was removed by commit b6bf9171ef5c
("ext4: reduce reserved cluster count by number of allocated
clusters"). ext4_find_delalloc_range was removed by commit
7d1b1fbc95eb ("ext4: reimplement ext4_find_delay_alloc_range on extent
status tree").

All instances of ext4_direct_IO_enter and ext4_direct_IO_exit were
removed by commit 378f32bab371 ("ext4: introduce direct I/O write
using iomap infrastructure").

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210216191634.20957-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Updated locking documentation for transaction_t

Some members of transaction_t are allowed to be read without any lock
being held if accessed from the correct context. We used LockDoc's
findings to determine those members. Each member of them is marked
with a short comment: "no lock needed for jbd2 thread".

Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210211171410.17984-1-alexander.lochmann@tu-dortmund.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: updated locking documentation for journal_t

Some members of transaction_t are allowed to be read without any lock
being held if consistency doesn't matter. Based on LockDoc's
findings, we extended the locking documentation of those members.
Each one of them is marked with a short comment: "no lock for quick
racy checks".

Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ad82c7a9-a624-4ed5-5ada-a6410c44c0b3@tu-dortmund.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use memcpy_to_page() in pagecache_write()

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210207190425.38107-7-chaitanya.kulkarni@wdc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use memcpy_from_page() in pagecache_read()

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210207190425.38107-6-chaitanya.kulkarni@wdc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Linux 5.12-rc4

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v5.12"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: initialize ret to suppress smatch warning
  ext4: stop inode update before return
  ext4: fix rename whiteout with fast commit
  ext4: fix timer use-after-free on failed mount
  ext4: fix potential error in ext4_do_update_inode
  ext4: do not try to set xattr into ea_inode if value is empty
  ext4: do not iput inode under running transaction in ext4_rename()
  ext4: find old entry again if failed to rename whiteout
  ext4: fix error handling in ext4_end_enable_verity()
  ext4: fix bh ref count on error paths
  fs/ext4: fix integer overflow in s_log_groups_per_flex
  ext4: add reclaim checks to xattr code
  ext4: shrink race window in ext4_should_retry_alloc()

Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block

Pull io_uring followup fixes from Jens Axboe:

- The SIGSTOP change from Eric, so we properly ignore that for
   PF_IO_WORKER threads.

- Disallow sending signals to PF_IO_WORKER threads in general, we're
   not interested in having them funnel back to the io_uring owning
   task.

- Stable fix from Stefan, ensuring we properly break links for short
   send/sendmsg recv/recvmsg if MSG_WAITALL is set.

- Catch and loop when needing to run task_work before a PF_IO_WORKER
   threads goes to sleep.

* tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block:
  io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
  io-wq: ensure task is running before processing task_work
  signal: don't allow STOP on PF_IO_WORKER threads
  signal: don't allow sending any signals to PF_IO_WORKER threads

Merge tag 'staging-5.12-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
"Some small staging and IIO driver fixes:

   - MAINTAINERS changes for the move of the staging mailing list

   - comedi driver fixes to get request_irq() to work correctly

   - counter driver fixes for reported issues with iio devices

   - tiny iio driver fixes for reported issues.

  All of these have been in linux-next with no reported problems"

* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt665x: fix alignment constraints
  staging: comedi: cb_pcidas64: fix request_irq() warn
  staging: comedi: cb_pcidas: fix request_irq() warn
  MAINTAINERS: move the staging subsystem to lists.linux.dev
  MAINTAINERS: move some real subsystems off of the staging mailing list
  iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  iio: hid-sensor-temperature: Fix issues of timestamp channel
  iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
  counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  counter: stm32-timer-cnt: fix ceiling write max value
  counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  iio: adc: ab8500-gpadc: Fix off by 10 to 3
  iio:adc:stm32-adc: Add HAS_IOMEM dependency
  iio: adis16400: Fix an error code in adis16400_initial_setup()
  iio: adc: adi-axi-adc: add proper Kconfig dependencies
  iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
  iio: hid-sensor-prox: Fix scale not correct issue
  iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel

Merge tag 'usb-5.12-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
  issues:

   - thunderbolt fixes for minor problems

   - typec fixes for power issues

   - usb-storage quirk addition

   - usbip bugfix

   - dwc3 bugfix when stopping transfers

   - cdnsp bugfix for isoc transfers

   - gadget use-after-free fix

  All have been in linux-next this week with no reported issues"

* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
  usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
  usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  usb-storage: Add quirk to defeat Kindle's automatic unload
  usb: gadget: configfs: Fix KASAN use-after-free
  usbip: Fix incorrect double assignment to udc->ud.tcp_rx
  usb: cdnsp: Fixes incorrect value in ISOC TRB
  thunderbolt: Increase runtime PM reference count on DP tunnel discovery
  thunderbolt: Initialize HopID IDAs in tb_switch_alloc()

Merge tag 'irq-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Ingo Molnar:
"A change to robustify force-threaded IRQ handlers to always disable
  interrupts, plus a DocBook fix.

  The force-threaded IRQ handler change has been accelerated from the
  normal schedule of such a change to keep the bad pattern/workaround of
  spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from
  spreading"

* tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Disable interrupts for force threaded handlers
  genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)

Merge tag 'perf-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Boundary condition fixes for bugs unearthed by the perf fuzzer"

* tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT
perf/x86/intel: Fix a crash caused by zero PEBS status

Merge tag 'locking-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Ingo Molnar:

- Get static calls & modules right. Hopefully.

- WW mutex fixes

* tag 'locking-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call: Fix static_call_update() sanity check
  static_call: Align static_call_is_init() patching condition
  static_call: Fix static_call_set_init()
  locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini()
  locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling

Merge tag 'efi-urgent-2021-03-21' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:

- another missing RT_PROP table related fix, to ensure that the
   efivarfs pseudo filesystem fails gracefully if variable services
   are unsupported

- use the correct alignment for literal EFI GUIDs

- fix a use after unmap issue in the memreserve code

* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: use 32-bit alignment for efi_guid_t literals
  firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
  efivars: respect EFI_UNSUPPORTED return from firmware

Merge tag 'x86_urgent_for_v5.12-rc4' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:

   - Add the arch-specific mapping between physical and logical CPUs to
     fix devicetree-node lookups

   - Restore the IRQ2 ignore logic

   - Fix get_nr_restart_syscall() to return the correct restart syscall
     number. Split in a 4-patches set to avoid kABI breakage when
     backporting to dead kernels"

* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/of: Fix CPU devicetree-node lookups
  x86/ioapic: Ignore IRQ2 again
  x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
  x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
  x86: Move TS_COMPAT back to asm/thread_info.h
  kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()

Merge tag 'powerpc-5.12-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix a possible stack corruption and subsequent DLPAR failure in the
   rpadlpar_io PCI hotplug driver

- Two build fixes for uncommon configurations

Thanks to Christophe Leroy and Tyrel Datwyler.

* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  PCI: rpadlpar: Fix potential drc_name corruption in store functions
  powerpc: Force inlining of cpu_has_feature() to avoid build failure
  powerpc/vdso32: Add missing _restgpr_31_x to fix build failure

io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL

Without that it's not safe to use them in a linked combination with
others.

Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE
should be possible.

We already handle short reads and writes for the following opcodes:

- IORING_OP_READV
- IORING_OP_READ_FIXED
- IORING_OP_READ
- IORING_OP_WRITEV
- IORING_OP_WRITE_FIXED
- IORING_OP_WRITE
- IORING_OP_SPLICE
- IORING_OP_TEE

Now we have it for these as well:

- IORING_OP_SENDMSG
- IORING_OP_SEND
- IORING_OP_RECVMSG
- IORING_OP_RECV

For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC
flags in order to call req_set_fail_links().

There might be applications arround depending on the behavior
that even short send[msg]()/recv[msg]() retuns continue an
IOSQE_IO_LINK chain.

It's very unlikely that such applications pass in MSG_WAITALL,
which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'.

It's expected that the low level sock_sendmsg() call just ignores
MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set
SO_ZEROCOPY.

We also expect the caller to know about the implicit truncation to
MAX_RW_COUNT, which we don't detect.

cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io-wq: ensure task is running before processing task_work

Mark the current task as running if we need to run task_work from the
io-wq threads as part of work handling. If that is the case, then return
as such so that the caller can appropriately loop back and reset if it
was part of a going-to-sleep flush.

Fixes: 3bfe6106693b ("io-wq: fork worker threads from original task")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

signal: don't allow STOP on PF_IO_WORKER threads

Just like we don't allow normal signals to IO threads, don't deliver a
STOP to a task that has PF_IO_WORKER set. The IO threads don't take
signals in general, and have no means of flushing out a stop either.

Longer term, we may want to look into allowing stop of these threads,
as it relates to eg process freezing. For now, this prevents a spin
issue if a SIGSTOP is delivered to the parent task.

Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

signal: don't allow sending any signals to PF_IO_WORKER threads

They don't take signals individually, and even if they share signals with
the parent task, don't allow them to be delivered through the worker
thread. Linux does allow this kind of behavior for regular threads, but
it's really a compatability thing that we need not care about for the IO
threads.

Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ext4: initialize ret to suppress smatch warning

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: stop inode update before return

The inode update should be stopped before returing the error code.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210117085732.93788-1-bianpan2016@163.com
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix rename whiteout with fast commit

This patch adds rename whiteout support in fast commits. Note that the
whiteout object that gets created is actually char device. Which
imples, the function ext4_inode_journal_mode(struct inode *inode)
would return "JOURNAL_DATA" for this inode. This has a consequence in
fast commit code that it will make creation of the whiteout object a
fast-commit ineligible behavior and thus will fall back to full
commits. With this patch, this can be observed by running fast commits
with rename whiteout and seeing the stats generated by ext4_fc_stats
tracepoint as follows:

ext4_fc_stats: dev 254:32 fc ineligible reasons:
XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0,
RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16;
num_commits:6, ineligible: 6, numblks: 3

So in short, this patch guarantees that in case of rename whiteout, we
fall back to full commits.

Amir mentioned that instead of creating a new whiteout object for
every rename, we can create a static whiteout object with irrelevant
nlink. That will make fast commits to not fall back to full
commit. But until this happens, this patch will ensure correctness by
falling back to full commits.

Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix timer use-after-free on failed mount

When filesystem mount fails because of corrupted filesystem we first
cancel the s_err_report timer reminding fs errors every day and only
then we flush s_error_work. However s_error_work may report another fs
error and re-arm timer thus resulting in timer use-after-free. Fix the
problem by first flushing the work and only after that canceling the
s_err_report timer.

Reported-by: syzbot+628472a2aac693ab0fcd@syzkaller.appspotmail.com
Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210315165906.2175-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix potential error in ext4_do_update_inode

If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.

Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: do not try to set xattr into ea_inode if value is empty

Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.

  WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
  ...
  Call trace:
   ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
   ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
   ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
   ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
   ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
   __vfs_setxattr+0x208/0x23c fs/xattr.c:177
  ...

Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.

  fallocate test.img -l 1M
  mkfs.ext4 -F -b 2048 -O ea_inode test.img
  mount test.img /mnt
  dd if=/dev/zero of=/mnt/foo bs=2048 count=500
  setfattr -n "user.test" /mnt/foo

Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes: 9c6e7853c531 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: do not iput inode under running transaction in ext4_rename()

In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into
directory, it ends up dropping new created whiteout inode under the
running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode
under running transaction"), we follow the assumptions that evict() does
not get called from a transaction context but in ext4_rename() it breaks
this suggestion. Although it's not a real problem, better to obey it, so
this patch add inode to orphan list and stop transaction before final
iput().

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: find old entry again if failed to rename whiteout

If we failed to add new entry on rename whiteout, we cannot reset the
old->de entry directly, because the old->de could have moved from under
us during make indexed dir. So find the old entry again before reset is
needed, otherwise it may corrupt the filesystem as below.

  /dev/sda: Entry '00000001' in ??? (12) has deleted/unused inode 15. CLEARED.
  /dev/sda: Unattached inode 75
  /dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.

Fixes: 6b4b8e6b4ad ("ext4: fix bug for rename with RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

genirq: Disable interrupts for force threaded handlers

With interrupt force threading all device interrupt handlers are invoked
from kernel threads. Contrary to hard interrupt context the invocation only
disables bottom halfs, but not interrupts. This was an oversight back then
because any code like this will have an issue:

thread(irq_A)
  irq_handler(A)
    spin_lock(&foo->lock);

interrupt(irq_B)
  irq_handler(B)
    spin_lock(&foo->lock);

This has been triggered with networking (NAPI vs. hrtimers) and console
drivers where printk() happens from an interrupt which interrupted the
force threaded handler.

Now people noticed and started to change the spin_lock() in the handler to
spin_lock_irqsave() which affects performance or add IRQF_NOTHREAD to the
interrupt request which in turn breaks RT.

Fix the root cause and not the symptom and disable interrupts before
invoking the force threaded handler which preserves the regular semantics
and the usefulness of the interrupt force threading as a general debugging
tool.

For not RT this is not changing much, except that during the execution of
the threaded handler interrupts are delayed until the handler
returns. Vs. scheduling and softirq processing there is no difference.

For RT kernels there is no issue.

Fixes: 8d32a307e4fa ("genirq: Provide forced interrupt threading")
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210317143859.513307808@linutronix.de

Merge tag 'riscv-for-linus-5.12-rc4' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:

   - fix the SBI remote fence numbers for hypervisor fences, which had
     been transcribed in the wrong order in Linux. These fences are only
     used with the KVM patches applied.

   - fix a whole host of build warnings, these should have no functional
     change.

   - fix init_resources() to prevent an off-by-one error from causing an
     out-of-bounds array reference. This was manifesting during boot on
     vexriscv.

   - ensure the KASAN mappings are visible before proceeding to use
     them"

* tag 'riscv-for-linus-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Correct SPARSEMEM configuration
  RISC-V: kasan: Declare kasan_shallow_populate() static
  riscv: Ensure page table writes are flushed when initializing KASAN vmalloc
  RISC-V: Fix out-of-bounds accesses in init_resources()
  riscv: Fix compilation error with Canaan SoC
  ftrace: Fix spelling mistake "disabed" -> "disabled"
  riscv: fix bugon.cocci warnings
  riscv: process: Fix no prototype for arch_dup_task_struct
  riscv: ftrace: Use ftrace_get_regs helper
  riscv: process: Fix no prototype for show_regs
  riscv: syscall_table: Reduce W=1 compilation warnings noise
  riscv: time: Fix no prototype for time_init
  riscv: ptrace: Fix no prototype warnings
  riscv: sbi: Fix comment of __sbi_set_timer_v01
  riscv: irq: Fix no prototype warning
  riscv: traps: Fix no prototype warnings
  RISC-V: correct enum sbi_ext_rfence_fid

Merge tag '5.12-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes - three for stable, including an important ACL
  fix and security signature fix"

* tag '5.12-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix allocation size on newly created files
  cifs: warn and fail if trying to use rootfs without the config option
  fs/cifs/: fix misspellings using codespell tool
  cifs: Fix preauth hash corruption
  cifs: update new ACE pointer after populate_new_aces.

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Eight fixes, all in drivers, all fairly minor either being fixes in
  error legs, memory leaks on teardown, context errors or semantic
  problems"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Do not use GFP_KERNEL in atomic context
  scsi: ufs: ufs-mediatek: Correct operator & -> &&
  scsi: sd_zbc: Update write pointer offset cache
  scsi: lpfc: Fix some error codes in debugfs
  scsi: qla2xxx: Fix broken #endif placement
  scsi: st: Fix a use after free in st_open()
  scsi: myrs: Fix a double free in myrs_cleanup()
  scsi: ibmvfc: Free channel_setup_buf during device tear down

Merge tag 'zonefs-5.12-rc4' of git://git./linux/kernel/git/dlemoal/zonefs

Pull zonefs fixes from Damien Le Moal:

- fix inode write open reference count (Chao)

- Fix wrong write offset for asynchronous O_APPEND writes (me)

- Prevent use of sequential zone file as swap files (me)

* tag 'zonefs-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: fix to update .i_wr_refcnt correctly in zonefs_open_zone()
  zonefs: Fix O_APPEND async write handling
  zonefs: prevent use of seq files as swap file

Merge tag 'block-5.12-2021-03-19' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Just an NVMe pull request this week:

   - fix tag allocation for keep alive

   - fix a unit mismatch for the Write Zeroes limits

   - various TCP transport fixes (Sagi Grimberg, Elad Grupi)

   - fix iosqes and iocqes validation for discovery controllers (Sagi Grimberg)"

* tag 'block-5.12-2021-03-19' of git://git.kernel.dk/linux-block:
  nvmet-tcp: fix kmap leak when data digest in use
  nvmet: don't check iosqes,iocqes for discovery controllers
  nvme-rdma: fix possible hang when failing to set io queues
  nvme-tcp: fix possible hang when failing to set io queues
  nvme-tcp: fix misuse of __smp_processor_id with preemption enabled
  nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDU
  nvme: fix Write Zeroes limitations
  nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAIT
  nvme: merge nvme_keep_alive into nvme_keep_alive_work
  nvme-fabrics: only reserve a single tag

Merge tag 'io_uring-5.12-2021-03-19' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Quieter week this time, which was both expected and desired. About
  half of the below is fixes for this release, the other half are just
  fixes in general. In detail:

   - Fix the freezing of IO threads, by making the freezer not send them
     fake signals. Make them freezable by default.

   - Like we did for personalities, move the buffer IDR to xarray. Kills
     some code and avoids a use-after-free on teardown.

   - SQPOLL cleanups and fixes (Pavel)

   - Fix linked timeout race (Pavel)

   - Fix potential completion post use-after-free (Pavel)

   - Cleanup and move internal structures outside of general kernel view
     (Stefan)

   - Use MSG_SIGNAL for send/recv from io_uring (Stefan)"

* tag 'io_uring-5.12-2021-03-19' of git://git.kernel.dk/linux-block:
  io_uring: don't leak creds on SQO attach error
  io_uring: use typesafe pointers in io_uring_task
  io_uring: remove structures from include/linux/io_uring.h
  io_uring: imply MSG_NOSIGNAL for send[msg]()/recv[msg]() calls
  io_uring: fix sqpoll cancellation via task_work
  io_uring: add generic callback_head helpers
  io_uring: fix concurrent parking
  io_uring: halt SQO submission on ctx exit
  io_uring: replace sqd rw_semaphore with mutex
  io_uring: fix complete_post use ctx after free
  io_uring: fix ->flags races by linked timeouts
  io_uring: convert io_buffer_idr to XArray
  io_uring: allow IO worker threads to be frozen
  kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing

x86/apic/of: Fix CPU devicetree-node lookups

Architectures that describe the CPU topology in devicetree and do not have
an identity mapping between physical and logical CPU ids must override the
default implementation of arch_match_cpu_phys_id().

Failing to do so breaks CPU devicetree-node lookups using of_get_cpu_node()
and of_cpu_device_node_get() which several drivers rely on. It also causes
the CPU struct devices exported through sysfs to point to the wrong
devicetree nodes.

On x86, CPUs are described in devicetree using their APIC ids and those
do not generally coincide with the logical ids, even if CPU0 typically
uses APIC id 0.

Add the missing implementation of arch_match_cpu_phys_id() so that CPU-node
lookups work also with SMP.

Apart from fixing the broken sysfs devicetree-node links this likely does
not affect current users of mainline kernels on x86.

Fixes: 4e07db9c8db8 ("x86/devicetree: Use CPU description from Device Tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210312092033.26317-1-johan@kernel.org

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"Fixes for kvm on x86:

   - new selftests

   - fixes for migration with HyperV re-enlightenment enabled

   - fix RCU/SRCU usage

   - fixes for local_irq_restore misuse false positive"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  documentation/kvm: additional explanations on KVM_SET_BOOT_CPU_ID
  x86/kvm: Fix broken irq restoration in kvm_wait
  KVM: X86: Fix missing local pCPU when executing wbinvd on all dirty pCPUs
  KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ish
  selftests: kvm: add set_boot_cpu_id test
  selftests: kvm: add _vm_ioctl
  selftests: kvm: add get_msr_index_features
  selftests: kvm: Add basic Hyper-V clocksources tests
  KVM: x86: hyper-v: Don't touch TSC page values when guest opted for re-enlightenment
  KVM: x86: hyper-v: Track Hyper-V TSC page status
  KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs
  KVM: x86: hyper-v: Limit guest to writing zero to HV_X64_MSR_TSC_EMULATION_STATUS
  KVM: x86/mmu: Store the address space ID in the TDP iterator
  KVM: x86/mmu: Factor out tdp_iter_return_to_root
  KVM: x86/mmu: Fix RCU usage when atomically zapping SPTEs
  KVM: x86/mmu: Fix RCU usage in handle_removed_tdp_mmu_page

Merge tag 'gpio-fixes-for-v5.12-rc4' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO subsystem. Both address issues in the core GPIO
  code:

   - fix the return value in error path in gpiolib_dev_init()

   - fix the 'gpio-line-names' property handling correctly this time"

* tag 'gpio-fixes-for-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Assign fwnode to parent's if no primary one provided
  gpiolib: Fix error return code in gpiolib_dev_init()

Merge tag 's390-5.12-4' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- disable preemption when accessing local per-cpu variables in the new
   counter set driver

- fix by a factor of four increased steal time due to missing
   cputime_to_nsecs() conversion

- fix PCI device structure leak

* tag 's390-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix leak of PCI device structure
  s390/vtime: fix increased steal time accounting
  s390/cpumf: disable preemption when accessing per-cpu variable

Merge tag 'trace-v5.12-rc3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull workqueue tracing fix from Steven Rostedt:
"Fix workqueue trace event unsafe string reference

  After adding a verifier to test all strings printed in trace events to
  make sure they either point to a string on the ring buffer, or to read
  only core kernel memory, it triggered on a workqueue trace event. The
  trace event workqueue_queue_work references the allocated name of the
  workqueue in the output. If the workqueue is freed before the trace is
  read, then the trace will dereference freed memory.

  Update the trace event to use the __string(), __assign_str(), and
  __get_str() helpers to handle such cases"

* tag 'trace-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  workqueue/tracing: Copy workqueue name to buffer in trace event

Merge tag 'pm-5.12-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"Revert two problematic commits.

  Specifics:

   - Revert ACPI PM commit that attempted to improve reboot handling on
     some systems, but it caused other systems to panic() during reboot
     (Josef Bacik)

   - Revert PM-runtime commit that attempted to improve the handling of
     suppliers during PM-runtime suspend of a consumer device, but it
     introduced a race condition potentially leading to unexpected
     behavior (Rafael Wysocki)"

* tag 'pm-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "PM: runtime: Update device status before letting suppliers suspend"
  Revert "PM: ACPI: reboot: Use S5 for reboot"

Merge tag 'iommu-fixes-v5.12-rc3' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Three AMD IOMMU patches to fix a boot crash on AMD Stoney systems and
   every other AMD IOMMU system booted with 'amd_iommu=off'.

   This is a v5.11 regression.

- A Fix for the Tegra IOMMU driver to make sure it detects all IOMMUs

* tag 'iommu-fixes-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/tegra-smmu: Make tegra_smmu_probe_device() to handle all IOMMU phandles
  iommu/amd: Keep track of amd_iommu_irq_remap state
  iommu/amd: Don't call early_amd_iommu_init() when AMD IOMMU is disabled
  iommu/amd: Move Stoney Ridge check to detect_ivrs()

Merge tag 'sound-5.12-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"The majority of changes are various ASoC device/platform-specific
  small fixes (including a removal of stale file) while the only common
  change is a clk management fix in ASoC simple-card driver.

  The rest are the usual HD-audio quirks"

* tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits)
  ALSA: usb-audio: Fix unintentional sign extension issue
  ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
  ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms
  ASoC: rt711: add snd_soc_component remove callback
  ASoC: rt5659: Update MCLK rate in set_sysclk()
  ASoC: simple-card-utils: Do not handle device clock
  ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
  ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
  ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
  ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge
  ALSA: dice: fix null pointer dereference when node is disconnected
  ALSA: hda: generic: Fix the micmute led init state
  ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
  spi: cadence: set cqspi to the driver_data field of struct device
  ASoC: SOF: intel: fix wrong poll bits in dsp power down
  ASoC: codecs: wcd934x: add a sanity check in set channel map
  ASoC: qcom: sdm845: Fix array out of range on rx slim channels
  ASoC: qcom: sdm845: Fix array out of bounds access
  ASoC: remove remnants of sirf prima/atlas audio codec
  ...

cifs: fix allocation size on newly created files

Applications that create and extend and write to a file do not
expect to see 0 allocation size.  When file is extended,
set its allocation size to a plausible value until we have a
chance to query the server for it.  When the file is cached
this will prevent showing an impossible number of allocated
blocks (like 0).  This fixes e.g. xfstests 614 which does

    1) create a file and set its size to 64K
    2) mmap write 64K to the file
    3) stat -c %b for the file (to query the number of allocated blocks)

It was failing because we returned 0 blocks.  Even though we would
return the correct cached file size, we returned an impossible
allocation size.

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Merge branch 'pm-core'

* pm-core:
Revert "PM: runtime: Update device status before letting suppliers suspend"

Revert "PM: runtime: Update device status before letting suppliers suspend"

Revert commit 44cc89f76464 ("PM: runtime: Update device status
before letting suppliers suspend") that introduced a race condition
into __rpm_callback() which allowed a concurrent rpm_resume() to
run and resume the device prematurely after its status had been
changed to RPM_SUSPENDED by __rpm_callback().

Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend")
Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge tag 'efi-urgent-for-v5.12-rc3' of git://git./linux/kernel/git/efi/efi into efi/urgent

Pull EFI fixes from Ard Biesheuvel:

"- another missing RT_PROP table related fix, to ensure that the efivarfs
    pseudo filesystem fails gracefully if variable services are unsupported
  - use the correct alignment for literal EFI GUIDs
  - fix a use after unmap issue in the memreserve code"

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'nvme-5.12-20210319' of git://git.infradead.org/nvme into block-5.12

Pull NVMe updates from Christoph:

"nvme fixes for 5.12

- fix tag allocation for keep alive
- fix a unit mismatch for the Write Zeroes limits
- various TCP transport fixes (Sagi Grimberg, Elad Grupi)
- fix iosqes and iocqes validation for discovery controllers (Sagi Grimberg)"

* tag 'nvme-5.12-20210319' of git://git.infradead.org/nvme:
  nvmet-tcp: fix kmap leak when data digest in use
  nvmet: don't check iosqes,iocqes for discovery controllers
  nvme-rdma: fix possible hang when failing to set io queues
  nvme-tcp: fix possible hang when failing to set io queues
  nvme-tcp: fix misuse of __smp_processor_id with preemption enabled
  nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDU
  nvme: fix Write Zeroes limitations
  nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAIT
  nvme: merge nvme_keep_alive into nvme_keep_alive_work
  nvme-fabrics: only reserve a single tag

static_call: Fix static_call_update() sanity check

Sites that match init_section_contains() get marked as INIT. For
built-in code init_sections contains both __init and __exit text. OTOH
kernel_text_address() only explicitly includes __init text (and there
are no __exit text markers).

Match what jump_label already does and ignore the warning for INIT
sites. Also see the excellent changelog for commit: 8f35eaa5f2de
("jump_label: Don't warn on __exit jump entries")

Fixes: 9183c3f9ed710 ("static_call: Add inline static call infrastructure")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20210318113610.739542434@infradead.org

static_call: Align static_call_is_init() patching condition

The intent is to avoid writing init code after init (because the text
might have been freed). The code is needlessly different between
jump_label and static_call and not obviously correct.

The existing code relies on the fact that the module loader clears the
init layout, such that within_module_init() always fails, while
jump_label relies on the module state which is more obvious and
matches the kernel logic.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20210318113610.636651340@infradead.org

static_call: Fix static_call_set_init()

It turns out that static_call_set_init() does not preserve the other
flags; IOW. it clears TAIL if it was set.

Fixes: 9183c3f9ed710 ("static_call: Add inline static call infrastructure")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20210318113610.519406371@infradead.org

x86/ioapic: Ignore IRQ2 again

Vitaly ran into an issue with hotplugging CPU0 on an Amazon instance where
the matrix allocator claimed to be out of vectors. He analyzed it down to
the point that IRQ2, the PIC cascade interrupt, which is supposed to be not
ever routed to the IO/APIC ended up having an interrupt vector assigned
which got moved during unplug of CPU0.

The underlying issue is that IRQ2 for various reasons (see commit
af174783b925 ("x86: I/O APIC: Never configure IRQ2" for details) is treated
as a reserved system vector by the vector core code and is not accounted as
a regular vector. The Amazon BIOS has an routing entry of pin2 to IRQ2
which causes the IO/APIC setup to claim that interrupt which is granted by
the vector domain because there is no sanity check. As a consequence the
allocation counter of CPU0 underflows which causes a subsequent unplug to
fail with:

[ ... ] CPU 0 has 4294967295 vectors, 589 available. Cannot disable CPU

There is another sanity check missing in the matrix allocator, but the
underlying root cause is that the IO/APIC code lost the IRQ2 ignore logic
during the conversion to irqdomains.

For almost 6 years nobody complained about this wreckage, which might
indicate that this requirement could be lifted, but for any system which
actually has a PIC IRQ2 is unusable by design so any routing entry has no
effect and the interrupt cannot be connected to a device anyway.

Due to that and due to history biased paranoia reasons restore the IRQ2
ignore logic and treat it as non existent despite a routing entry claiming
otherwise.

Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210318192819.636943062@linutronix.de

documentation/kvm: additional explanations on KVM_SET_BOOT_CPU_ID

The ioctl KVM_SET_BOOT_CPU_ID fails when called after vcpu creation.
Add this explanation in the documentation.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210319091650.11967-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

efi: use 32-bit alignment for efi_guid_t literals

Commit 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t") updated
the type definition of efi_guid_t to ensure that it always appears
sufficiently aligned (the UEFI spec is ambiguous about this, but given
the fact that its EFI_GUID type is defined in terms of a struct carrying
a uint32_t, the natural alignment is definitely >= 32 bits).

However, we missed the EFI_GUID() macro which is used to instantiate
efi_guid_t literals: that macro is still based on the guid_t type,
which does not have a minimum alignment at all. This results in warnings
such as

  In file included from drivers/firmware/efi/mokvar-table.c:35:
  include/linux/efi.h:1093:34: warning: passing 1-byte aligned argument to
      4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
      access [-Walign-mismatch]
          status = get_var(L"SecureBoot", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size,
                                          ^
  include/linux/efi.h:1101:24: warning: passing 1-byte aligned argument to
      4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
      access [-Walign-mismatch]
          get_var(L"SetupMode", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size, &setupmode);

The distinction only matters on CPUs that do not support misaligned loads
fully, but 32-bit ARM's load-multiple instructions fall into that category,
and these are likely to be emitted by the compiler that built the firmware
for loading word-aligned 128-bit GUIDs from memory

So re-implement the initializer in terms of our own efi_guid_t type, so that
the alignment becomes a property of the literal's type.

Fixes: 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1327
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

firmware/efi: Fix a use after bug in efi_mem_reserve_persistent

In the for loop in efi_mem_reserve_persistent(), prsv = rsv->next
use the unmapped rsv. Use the unmapped pages will cause segment
fault.

Fixes: 18df7577adae6 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

cifs: warn and fail if trying to use rootfs without the config option

If CONFIG_CIFS_ROOT is not set, rootfs mount option is invalid

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.11
Signed-off-by: Steve French <stfrench@microsoft.com>

fs/cifs/: fix misspellings using codespell tool

A typo is found out by codespell tool in 251th lines of cifs_swn.c:

$ codespell ./fs/cifs/
./cifs_swn.c:251: funciton ==> function

Fix a typo found by codespell.

Signed-off-by: Liu xuzhi <liu.xuzhi@zte.com.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'drm-fixes-2021-03-19' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular fixes pull, pretty small set of fixes, a couple of i915 and
  amdgpu, one ttm, one nouveau and one omap. Probably smaller than usual
  for this time, so we'll see if something pops up next week or if this
  will continue to stay small.

  Summary:

  ttm:
   - Make ttm_bo_unpin() not wraparound on too many unpins

  omap:
   - Fix coccicheck warning in omap

  amdgpu:
   - DCN 3.0 gamma fixes
   - DCN 2.1 corrupt screen fix

  i915:
   - Workaround async flip + VT-d frame corruption on HSW/BDW
   - Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+

  nouveau:
   - workaround oops with bo syncing"

* tag 'drm-fixes-2021-03-19' of git://anongit.freedesktop.org/drm/drm:
  nouveau: Skip unvailable ttm page entries
  drm/amd/display: Remove MPC gamut remap logic for DCN30
  drm/amd/display: Correct algorithm for reversed gamma
  drm/omap: dsi: fix unsigned expression compared with zero
  i915/perf: Start hrtimer only if sampling the OA buffer
  drm/i915: Workaround async flip + VT-d corruption on HSW/BDW
  drm/amd/display: Copy over soc values before bounding box creation
  drm/ttm: make ttm_bo_unpin more defensive

nouveau: Skip unvailable ttm page entries

Starting with commit f295c8cfec833c2707ff1512da10d65386dde7af
("drm/nouveau: fix dma syncing warning with debugging on.")
the following oops occures:

   BUG: kernel NULL pointer dereference, address: 0000000000000000
   #PF: supervisor read access in kernel mode
   #PF: error_code(0x0000) - not-present page
   PGD 0 P4D 0
   Oops: 0000 [#1] PREEMPT SMP PTI
   CPU: 6 PID: 1013 Comm: Xorg.bin Tainted: G E     5.11.0-desktop-rc0+ #2
   Hardware name: Acer Aspire VN7-593G/Pluto_KLS, BIOS V1.11 08/01/2018
   RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
   Call Trace:
    nouveau_bo_validate+0x5d/0x80 [nouveau]
    nouveau_gem_ioctl_pushbuf+0x662/0x1120 [nouveau]
    ? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
    drm_ioctl_kernel+0xa6/0xf0 [drm]
    drm_ioctl+0x1f4/0x3a0 [drm]
    ? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
    nouveau_drm_ioctl+0x50/0xa0 [nouveau]
    __x64_sys_ioctl+0x7e/0xb0
    do_syscall_64+0x33/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xae
   ---[ end trace ccfb1e7f4064374f ]---
   RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]

The underlying problem is not introduced by the commit, yet it uncovered the
underlying issue. The cited commit relies on valid pages. This is not given for
due to some bugs. For now, just warn and work around the issue by just ignoring
the bad ttm objects.
Below is some debug info gathered while debugging this issue:

nouveau 0000:01:00.0: DRM: ttm_dma->num_pages: 2048
nouveau 0000:01:00.0: DRM: ttm_dma->pages is NULL
nouveau 0000:01:00.0: DRM: ttm_dma: 00000000e96058e7
nouveau 0000:01:00.0: DRM: ttm_dma->page_flags:
nouveau 0000:01:00.0: DRM: ttm_dma:   Populated: 1
nouveau 0000:01:00.0: DRM: ttm_dma:   No Retry: 0
nouveau 0000:01:00.0: DRM: ttm_dma:   SG: 256
nouveau 0000:01:00.0: DRM: ttm_dma:   Zero Alloc: 0
nouveau 0000:01:00.0: DRM: ttm_dma:   Swapped: 0

Signed-off-by: Tobias Klausmann <tobias.klausmann@freenet.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313222159.3346-1-tobias.klausmann@freenet.de

Merge tag 'drm-intel-fixes-2021-03-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.12-rc4:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87blbg8y5t.fsf@intel.com

Merge tag 'amd-drm-fixes-5.12-2021-03-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318042858.3810-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2021-03-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v5.12-rc4:
- Make ttm_bo_unpin() not wraparound on too many unpins.
- Fix coccicheck warning in omap.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0e13bbb-6ba6-ff24-4db8-0e02e605de18@linux.intel.com

Merge tag 'for-5.12-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"There are still regressions being found and fixed in the zoned mode
  and subpage code, the rest are fixes for bugs reported by users.

  Regressions:

   - subpage block support:
      - readahead works on the proper block size
      - fix last page zeroing

   - zoned mode:
      - linked list corruption for tree log

  Fixes:

   - qgroup leak after falloc failure

   - tree mod log and backref resolving:
      - extent buffer cloning race when resolving backrefs
      - pin deleted leaves with active tree mod log users

   - drop debugging flag from slab cache"

* tag 'for-5.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: always pin deleted leaves when there are active tree mod log users
  btrfs: fix race when cloning extent buffer during rewind of an old root
  btrfs: fix slab cache flags for free space tree bitmap
  btrfs: subpage: make readahead work properly
  btrfs: subpage: fix wild pointer access during metadata read failure
  btrfs: zoned: fix linked list corruption after log root tree allocation failure
  btrfs: fix qgroup data rsv leak caused by falloc failure
  btrfs: track qgroup released data in own variable in insert_prealloc_file_extent
  btrfs: fix wrong offset to zero out range beyond i_size

Merge tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

- Fix 32-bit issue with new unmap-all flag (Steve Sistare)

- Various Kconfig changes for better coverage (Jason Gunthorpe)

- Fix to batch pinning support (Daniel Jordan)

* tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/type1: fix vaddr_get_pfns() return in vfio_pin_page_external()
  vfio: Depend on MMU
  ARM: amba: Allow some ARM_AMBA users to compile with COMPILE_TEST
  vfio-platform: Add COMPILE_TEST to VFIO_PLATFORM
  vfio: IOMMU_API should be selected
  vfio/type1: fix unmap all on ILP32

Merge tag 'xfs-5.12-fixes-3' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"A couple of minor corrections for the new idmapping functionality, and
  a fix for a theoretical hang that could occur if we decide to abort a
  mount after dirtying the quota inodes.

  Summary:

   - Fix quota accounting on creat() when id mapping is enabled

   - Actually reclaim dirty quota inodes when mount fails

   - Typo fixes for documentation

   - Restrict both bulkstat calls on idmapped/namespaced mounts"

* tag 'xfs-5.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: also reject BULKSTAT_SINGLE in a mount user namespace
  docs: ABI: Fix the spelling oustanding to outstanding in the file sysfs-fs-xfs
  xfs: force log and push AIL to clear pinned inodes when aborting mount
  xfs: fix quota accounting when a mount is idmapped

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"Some fixes and cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails
  vhost-vdpa: fix use-after-free of v->config_ctx
  vhost: Fix vhost_vq_reset()
  vhost_vdpa: fix the missing irq_bypass_unregister_producer() invocation
  vdpa_sim: Skip typecasting from void*
  virtio: remove export for virtio_config_{enable, disable}
  virtio-mmio: Use to_virtio_mmio_device() to simply code
  vdpa: set the virtqueue num during register

x86/kvm: Fix broken irq restoration in kvm_wait

After commit 997acaf6b4b59c (lockdep: report broken irq restoration), the guest
splatting below during boot:

raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30
Modules linked in: hid_generic usbhid hid
CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25
RIP: 0010:warn_bogus_irq_restore+0x26/0x30
Call Trace:
  kvm_wait+0x76/0x90
  __pv_queued_spin_lock_slowpath+0x285/0x2e0
  do_raw_spin_lock+0xc9/0xd0
  _raw_spin_lock+0x59/0x70
  lockref_get_not_dead+0xf/0x50
  __legitimize_path+0x31/0x60
  legitimize_root+0x37/0x50
  try_to_unlazy_next+0x7f/0x1d0
  lookup_fast+0xb0/0x170
  path_openat+0x165/0x9b0
  do_filp_open+0x99/0x110
  do_sys_openat2+0x1f1/0x2e0
  do_sys_open+0x5c/0x80
  __x64_sys_open+0x21/0x30
  do_syscall_64+0x32/0x50
  entry_SYSCALL_64_after_hwframe+0x44/0xae

The new consistency checking,  expects local_irq_save() and
local_irq_restore() to be paired and sanely nested, and therefore expects
local_irq_restore() to be called with irqs disabled.
The irqflags handling in kvm_wait() which ends up doing:

local_irq_save(flags);
safe_halt();
local_irq_restore(flags);

instead triggers it.  This patch fixes it by using
local_irq_disable()/enable() directly.

Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>