Christophe JAILLET [Fri, 28 Apr 2017 04:51:40 +0000 (01:51 -0300)]
vb2: Fix an off by one error in 'vb2_plane_vaddr'
commit
5ebb6dd36c9f5fb37b1077b393c254d70a14cb46 upstream.
We should ensure that 'plane_no' is '< vb->num_planes' as done in
'vb2_plane_cookie' just a few lines below.
Fixes:
e23ccc0ad925 ("[media] v4l: add videobuf2 Video for Linux 2 driver framework")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomasz Wilczyński [Sun, 11 Jun 2017 08:28:39 +0000 (17:28 +0900)]
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
commit
b8e11f7d2791bd9320be1c6e772a60b2aa093e45 upstream.
Commit
27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency
decrease checking) removed the 10 point substraction when comparing the
load against down_threshold but did not remove the related limit for the
down_threshold value. As a result, down_threshold lower than 11 is not
allowed even though values from 1 to 10 do work correctly too. The
comment ("cannot be lower than 11 otherwise freq will not fall") also
does not apply after removing the substraction.
For this reason, allow down_threshold to take any value from 1 to 99
and fix the related comment.
Fixes:
27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency decrease checking)
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 8 Jun 2017 07:54:24 +0000 (09:54 +0200)]
ila_xlat: add missing hash secret initialization
commit
0db47e3d323411beeb6ea97f2c4d19395c91fd8b upstream.
While discussing the possible merits of clang warning about unused initialized
functions, I found one function that was clearly meant to be called but
never actually is.
__ila_hash_secret_init() initializes the hash value for the ila locator,
apparently this is intended to prevent hash collision attacks, but this ends
up being a read-only zero constant since there is no caller. I could find
no indication of why it was never called, the earliest patch submission
for the module already was like this. If my interpretation is right, we
certainly want to backport the patch to stable kernels as well.
I considered adding it to the ila_xlat_init callback, but for best effect
the random data is read as late as possible, just before it is first used.
The underlying net_get_random_once() is already highly optimized to avoid
overhead when called frequently.
Fixes:
7f00feaf1076 ("ila: Add generic ILA translation facility")
Link: https://www.spinics.net/lists/kernel/msg2527243.html
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Kleine-Budde [Sun, 4 Jun 2017 12:03:42 +0000 (14:03 +0200)]
can: gs_usb: fix memory leak in gs_cmd_reset()
commit
5cda3ee5138e91ac369ed9d0b55eab0dab077686 upstream.
This patch adds the missing kfree() in gs_cmd_reset() to free the
memory that is not used anymore after usb_control_msg().
Cc: Maximilian Schneider <max@schneidersoft.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Thu, 8 Jun 2017 04:51:54 +0000 (04:51 +0000)]
configfs: Fix race between create_link and configfs_rmdir
commit
ba80aa909c99802c428682c352b0ee0baac0acd3 upstream.
This patch closes a long standing race in configfs between
the creation of a new symlink in create_link(), while the
symlink target's config_item is being concurrently removed
via configfs_rmdir().
This can happen because the symlink target's reference
is obtained by config_item_get() in create_link() before
the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep()
during configfs_rmdir() shutdown is actually checked..
This originally manifested itself on ppc64 on v4.8.y under
heavy load using ibmvscsi target ports with Novalink API:
[ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added
[ 7879.893760] ------------[ cut here ]------------
[ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs]
[ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 #12
[ 7879.893812] task:
c00000018a0d3400 task.stack:
c0000001f3b40000
[ 7879.893813] NIP:
d000000002c664ec LR:
d000000002c60980 CTR:
c000000000b70870
[ 7879.893814] REGS:
c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22)
[ 7879.893815] MSR:
8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR:
28222242 XER:
00000000
[ 7879.893820] CFAR:
d000000002c664bc SOFTE: 1
GPR00:
d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820
GPR04:
c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000
GPR08:
0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80
GPR12:
c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40
GPR16:
c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940
GPR20:
c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000
GPR24:
fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490
GPR28:
0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940
[ 7879.893839] NIP [
d000000002c664ec] config_item_get+0x7c/0x90 [configfs]
[ 7879.893841] LR [
d000000002c60980] check_perm+0x80/0x2e0 [configfs]
[ 7879.893842] Call Trace:
[ 7879.893844] [
c0000001f3b43ac0] [
d000000002c60980] check_perm+0x80/0x2e0 [configfs]
[ 7879.893847] [
c0000001f3b43b10] [
c000000000329770] do_dentry_open+0x2c0/0x460
[ 7879.893849] [
c0000001f3b43b70] [
c000000000344480] path_openat+0x210/0x1490
[ 7879.893851] [
c0000001f3b43c80] [
c00000000034708c] do_filp_open+0xfc/0x170
[ 7879.893853] [
c0000001f3b43db0] [
c00000000032b5bc] do_sys_open+0x1cc/0x390
[ 7879.893856] [
c0000001f3b43e30] [
c000000000009584] system_call+0x38/0xec
[ 7879.893856] Instruction dump:
[ 7879.893858]
409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000
[ 7879.893861]
2f890000 409effe0 39200001 992a0000 <
0fe00000>
4bffffd0 60000000 60000000
[ 7879.893866] ---[ end trace
14078f0b3b5ad0aa ]---
To close this race, go ahead and obtain the symlink's target
config_item reference only after the existing CONFIGFS_USET_DROPPING
check succeeds.
This way, if configfs_rmdir() wins create_link() will return -ENONET,
and if create_link() wins configfs_rmdir() will return -EBUSY.
Reported-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Fri, 16 Jun 2017 09:08:24 +0000 (11:08 +0200)]
fs: pass on flags in compat_writev
commit
20223f0f39ea9d31ece08f04ac79f8c4e8d98246 upstream.
Fixes:
793b80ef14af ("vfs: pass a flags argument to vfs_readv/vfs_writev")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 17 Jun 2017 04:43:47 +0000 (06:43 +0200)]
Linux 4.9.33
Dan Carpenter [Fri, 25 Nov 2016 11:03:55 +0000 (14:03 +0300)]
sparc64: make string buffers large enough
commit
b5c3206190f1fddd100b3060eb15f0d775ffeab8 upstream.
My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit)
then some of the strings will overflow. I don't know if that's possible
but it seems simple enough to make the buffers slightly larger.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Lankhorst [Wed, 31 May 2017 15:42:36 +0000 (17:42 +0200)]
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
commit
4e3aed844547f63614363a386de126e6304e55fb upstream.
On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.
Changes since v1:
- Do not take the connection_mutex, this is already done below.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes:
98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit
367d73d2806085bb507ab44c1f532640917fd5ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Thu, 15 Dec 2016 17:47:34 +0000 (19:47 +0200)]
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
commit
8f4d38099b3098eae75f7755e1801931f8141350 upstream.
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.
On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.
For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.
v2: Adjust the comments a bit
Cc: Jonas Aaberg <cja@gmx.net>
Tested-by: Jonas Aaberg <cja@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit
ec1b4ee2834e66884e5b0d3d465f347ff212e372)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Borntraeger [Mon, 15 May 2017 12:11:03 +0000 (14:11 +0200)]
s390/kvm: do not rely on the ILC on kvm host protection fauls
commit
c0e7bb38c07cbd8269549ee0a0566021a3c729de upstream.
For most cases a protection exception in the host (e.g. copy
on write or dirty tracking) on the sie instruction will indicate
an instruction length of 4. Turns out that there are some corner
cases (e.g. runtime instrumentation) where this is not necessarily
true and the ILC is unpredictable.
Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for
all possible ILCs.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Filippov [Mon, 5 Jun 2017 09:43:51 +0000 (02:43 -0700)]
xtensa: don't use linux IRQ #0
commit
e5c86679d5e864947a52fb31e45a425dea3e7fa9 upstream.
Linux IRQ #0 is reserved for error reporting and may not be used.
Increase NR_IRQS for one additional slot and increase
irq_domain_add_legacy parameter first_irq value to 1, so that linux
IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains.
Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa
PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform
data definitions.
This fixes inability to use hardware IRQ #0 in configurations that don't
use device tree and allows for non-identity mapping between linux IRQ #
and hardware IRQ #.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ram Amrani [Tue, 24 Jan 2017 11:50:35 +0000 (13:50 +0200)]
RDMA/qedr: Return max inline data in QP query result
[ Upstream commit
59e8970b3798e4cbe575ed9cf4d53098760a2a86 ]
Return the maximum supported amount of inline data, not the qp's current
configured inline data size, when filling out the results of a query
qp call.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ram Amrani [Tue, 24 Jan 2017 11:50:37 +0000 (13:50 +0200)]
RDMA/qedr: Don't spam dmesg if QP is in error state
[ Upstream commit
c78c31496111f497b4a03f955c100091185da8b6 ]
It is normal to flush CQEs if the QP is in error state. Hence there's no
use in printing a message per CQE to dmesg.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ram Amrani [Tue, 24 Jan 2017 11:50:38 +0000 (13:50 +0200)]
RDMA/qedr: Don't reset QP when queues aren't flushed
[ Upstream commit
933e6dcaa0f65eb2f624ad760274020874a1f35e ]
Fail QP state transition from error to reset if SQ/RQ are not empty
and still in the process of flushing out the queued work entries.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ram Amrani [Tue, 24 Jan 2017 11:51:42 +0000 (13:51 +0200)]
RDMA/qedr: Fix and simplify memory leak in PD alloc
[ Upstream commit
9c1e0228ab35e52d30abf4b5629c28350833fbcb ]
Free the PD if no internal resources were available. Move userspace
code under the relevant 'if'.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ram Amrani [Tue, 24 Jan 2017 11:51:43 +0000 (13:51 +0200)]
RDMA/qedr: Dispatch port active event from qedr_add
[ Upstream commit
f449c7a2d822c2d81b5bcb2c50eec80796766726 ]
Relying on qede to trigger qedr on startup is problematic. When probing
both if qedr loads slowly then qede can assume qedr is missing and not
trigger it. This patch adds a triggering from qedr and protects against
a race via an atomic bit.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liping Zhang [Sun, 22 Jan 2017 14:10:32 +0000 (22:10 +0800)]
netfilter: nft_log: restrict the log prefix length to 127
[ Upstream commit
5ce6b04ce96896e8a79e6f60740ced911eaac7a4 ]
First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127,
at nf_log_packet(), so the extra part is useless.
Second, after adding a log rule with a very very long prefix, we will
fail to dump the nft rules after this _special_ one, but acctually,
they do exist. For example:
# name_65000=$(printf "%0.sQ" {1..65000})
# nft add rule filter output log prefix "$name_65000"
# nft add rule filter output counter
# nft add rule filter output counter
# nft list chain filter output
table ip filter {
chain output {
type filter hook output priority 0; policy accept;
}
}
So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1.
Fixes:
96518518cc41 ("netfilter: add nftables")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Mon, 23 Jan 2017 23:51:32 +0000 (00:51 +0100)]
netfilter: nf_tables: fix set->nelems counting with no NLM_F_EXCL
[ Upstream commit
35d0ac9070ef619e3bf44324375878a1c540387b ]
If the element exists and no NLM_F_EXCL is specified, do not bump
set->nelems, otherwise we leak one set element slot. This problem
amplifies if the set is full since the abort path always decrements the
counter for the -ENFILE case too, giving one spare extra slot.
Fix this by moving set->nelems update to nft_add_set_elem() after
successful element insertion. Moreover, remove the element if the set is
full so there is no need to rely on the abort path to undo things
anymore.
Fixes:
c016c7e45ddf ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:43 +0000 (13:00 +0100)]
tipc: fix nametbl_lock soft lockup at node/link events
[ Upstream commit
93f955aad4bacee5acebad141d1a03cd51f27b4e ]
We trigger a soft lockup as we grab nametbl_lock twice if the node
has a pending node up/down or link up/down event while:
- we process an incoming named message in tipc_named_rcv() and
perform an tipc_update_nametbl().
- we have pending backlog items in the name distributor queue
during a nametable update using tipc_nametbl_publish() or
tipc_nametbl_withdraw().
The following are the call chain associated:
tipc_named_rcv() Grabs nametbl_lock
tipc_update_nametbl() (publish/withdraw)
tipc_node_subscribe()/unsubscribe()
tipc_node_write_unlock()
<< lockup occurs if an outstanding node/link event
exits, as we grabs nametbl_lock again >>
tipc_nametbl_withdraw() Grab nametbl_lock
tipc_named_process_backlog()
tipc_update_nametbl()
<< rest as above >>
The function tipc_node_write_unlock(), in addition to releasing the
lock processes the outstanding node/link up/down events. To do this,
we need to grab the nametbl_lock again leading to the lockup.
In this commit we fix the soft lockup by introducing a fast variant of
node_unlock(), where we just release the lock. We adapt the
node_subscribe()/node_unsubscribe() to use the fast variants.
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:44 +0000 (13:00 +0100)]
tipc: add subscription refcount to avoid invalid delete
[ Upstream commit
d094c4d5f5c7e1b225e94227ca3f007be3adc4e8 ]
Until now, the subscribers keep track of the subscriptions using
reference count at subscriber level. At subscription cancel or
subscriber delete, we delete the subscription only if the timer
was pending for the subscription. This approach is incorrect as:
1. del_timer() is not SMP safe, if on CPU0 the check for pending
timer returns true but CPU1 might schedule the timer callback
thereby deleting the subscription. Thus when CPU0 is scheduled,
it deletes an invalid subscription.
2. We export tipc_subscrp_report_overlap(), which accesses the
subscription pointer multiple times. Meanwhile the subscription
timer can expire thereby freeing the subscription and we might
continue to access the subscription pointer leading to memory
violations.
In this commit, we introduce subscription refcount to avoid deleting
an invalid subscription.
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:45 +0000 (13:00 +0100)]
tipc: fix connection refcount error
[ Upstream commit
fc0adfc8fd18b61b6f7a3f28b429e134d6f3a008 ]
Until now, the generic server framework maintains the connection
id's per subscriber in server's conn_idr. At tipc_close_conn, we
remove the connection id from the server list, but the connection is
valid until we call the refcount cleanup. Hence we have a window
where the server allocates the same connection to an new subscriber
leading to inconsistent reference count. We have another refcount
warning we grab the refcount in tipc_conn_lookup() for connections
with flag with CF_CONNECTED not set. This usually occurs at shutdown
when the we stop the topology server and withdraw TIPC_CFG_SRV
publication thereby triggering a withdraw message to subscribers.
In this commit, we:
1. remove the connection from the server list at recount cleanup.
2. grab the refcount for a connection only if CF_CONNECTED is set.
Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:47 +0000 (13:00 +0100)]
tipc: ignore requests when the connection state is not CONNECTED
[ Upstream commit
4c887aa65d38633885010277f3482400681be719 ]
In tipc_conn_sendmsg(), we first queue the request to the outqueue
followed by the connection state check. If the connection is not
connected, we should not queue this message.
In this commit, we reject the messages if the connection state is
not CF_CONNECTED.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineet Gupta [Tue, 21 Jun 2016 08:54:33 +0000 (14:24 +0530)]
ARCv2: smp-boot: wake_flag polling by non-Masters needs to be uncached
[ Upstream commit
78f824d4312a8944f5340c6b161bba3bf2c81096 ]
This is needed on HS38 cores, for setting up IO-Coherency aperture properly
The polling could perturb the caches and coherecy fabric which could be
wrong in the small window when Master is setting up IOC aperture etc
in arc_cache_init()
We do it only for ARCv2 based builds to not affect EZChip ARCompact
based platform.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineet Gupta [Thu, 12 Jan 2017 22:30:29 +0000 (14:30 -0800)]
ARC: smp-boot: Decouple Non masters waiting API from jump to entry point
[ Upstream commit
bf02454a741b58682a82c314a9a46bed930ed2f7 ]
For run-on-reset SMP configs, non master cores call a routine which
waits until Master gives it a "go" signal (currently using a shared
mem flag). The same routine then jumps off the well known entry point of
all non Master cores i.e. @first_lines_of_secondary
This patch moves out the last part into one single place in early boot
code.
This is better in terms of absraction (the wait API only waits) and
returns, leaving out the "jump off to" part.
In actual implementation this requires some restructuring of the early
boot code as well as Master now jumps to BSS setup explicitly,
vs. falling thru into it before.
Technically this patch doesn't cause any functional change, it just
moves the ugly #ifdef'ry from assembly code to "C"
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Thu, 19 Jan 2017 10:43:53 +0000 (10:43 +0000)]
vhost/vsock: handle vhost_vq_init_access() error
[ Upstream commit
0516ffd88fa0d006ee80389ce14a9ca5ae45e845 ]
Propagate the error when vhost_vq_init_access() fails and set
vq->private_data to NULL.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don Zickus [Tue, 24 Jan 2017 23:17:53 +0000 (15:17 -0800)]
kernel/watchdog: prevent false hardlockup on overloaded system
[ Upstream commit
b94f51183b0617e7b9b4fb4137d4cf1cab7547c2 ]
On an overloaded system, it is possible that a change in the watchdog
threshold can be delayed long enough to trigger a false positive.
This can easily be achieved by having a cpu spinning indefinitely on a
task, while another cpu updates watchdog threshold.
What happens is while trying to park the watchdog threads, the hrtimers
on the other cpus trigger and reprogram themselves with the new slower
watchdog threshold. Meanwhile, the nmi watchdog is still programmed
with the old faster threshold.
Because the one cpu is blocked, it prevents the thread parking on the
other cpus from completing, which is needed to shutdown the nmi watchdog
and reprogram it correctly. As a result, a false positive from the nmi
watchdog is reported.
Fix this by setting a park_in_progress flag to block all lockups until
the parking is complete.
Fix provided by Ulrich Obergfell.
[akpm@linux-foundation.org: s/park_in_progress/watchdog_park_in_progress/]
Link: http://lkml.kernel.org/r/1481041033-192236-1-git-send-email-dzickus@redhat.com
Signed-off-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Babu Moger [Wed, 14 Dec 2016 23:06:21 +0000 (15:06 -0800)]
kernel/watchdog.c: move shared definitions to nmi.h
[ Upstream commit
249e52e35580fcfe5dad53a7dcd7c1252788749c ]
Patch series "Clean up watchdog handlers", v2.
This is an attempt to cleanup watchdog handlers. Right now,
kernel/watchdog.c implements both softlockup and hardlockup detectors.
Softlockup code is generic. Hardlockup code is arch specific. Some
architectures don't use hardlockup detectors. They use their own
watchdog detectors. To make both these combination work, we have
numerous #ifdefs in kernel/watchdog.c.
We are trying here to make these handlers independent of each other.
Also provide an interface for architectures to implement their own
handlers. watchdog_nmi_enable and watchdog_nmi_disable will be defined
as weak such that architectures can override its definitions.
Thanks to Don Zickus for his suggestions.
Here are our previous discussions
http://www.spinics.net/lists/sparclinux/msg16543.html
http://www.spinics.net/lists/sparclinux/msg16441.html
This patch (of 3):
Move shared macros and definitions to nmi.h so that watchdog.c, new file
watchdog_hld.c or any other architecture specific handler can use those
definitions.
Link: http://lkml.kernel.org/r/1478034826-43888-2-git-send-email-babu.moger@oracle.com
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Josh Hunt <johunt@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Babu Moger [Wed, 14 Dec 2016 23:06:24 +0000 (15:06 -0800)]
kernel/watchdog.c: move hardlockup detector to separate file
[ Upstream commit
73ce0511c43686095efd2f65ef564aab952e07bc ]
Separate hardlockup code from watchdog.c and move it to watchdog_hld.c.
It is mostly straight forward. Remove everything inside
CONFIG_HARDLOCKUP_DETECTORS. This code will go to file watchdog_hld.c.
Also update the makefile accordigly.
Link: http://lkml.kernel.org/r/1478034826-43888-3-git-send-email-babu.moger@oracle.com
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Josh Hunt <johunt@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Tue, 24 Jan 2017 23:17:59 +0000 (15:17 -0800)]
userfaultfd: fix SIGBUS resulting from false rwsem wakeups
[ Upstream commit
15a77c6fe494f4b1757d30cd137fe66ab06a38c3 ]
With >=32 CPUs the userfaultfd selftest triggered a graceful but
unexpected SIGBUS because VM_FAULT_RETRY was returned by
handle_userfault() despite the UFFDIO_COPY wasn't completed.
This seems caused by rwsem waking the thread blocked in
handle_userfault() and we can't run up_read() before the wait_event
sequence is complete.
Keeping the wait_even sequence identical to the first one, would require
running userfaultfd_must_wait() again to know if the loop should be
repeated, and it would also require retaking the rwsem and revalidating
the whole vma status.
It seems simpler to wait the targeted wakeup so that if false wakeups
materialize we still wait for our specific wakeup event, unless of
course there are signals or the uffd was released.
Debug code collecting the stack trace of the wakeup showed this:
$ ./userfaultfd 100 99999
nr_pages: 25600, nr_pages_per_cpu: 800
bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2
bounces: 99997, mode: rnd ver poll, Bus error (core dumped)
save_stack_trace+0x2b/0x50
try_to_wake_up+0x2a6/0x580
wake_up_q+0x32/0x70
rwsem_wake+0xe0/0x120
call_rwsem_wake+0x1b/0x30
up_write+0x3b/0x40
vm_mmap_pgoff+0x9c/0xc0
SyS_mmap_pgoff+0x1a9/0x240
SyS_mmap+0x22/0x30
entry_SYSCALL_64_fastpath+0x1f/0xbd
0xffffffffffffffff
FAULT_FLAG_ALLOW_RETRY missing 70
CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xb8/0x112
handle_userfault+0x572/0x650
handle_mm_fault+0x12cb/0x1520
__do_page_fault+0x175/0x500
trace_do_page_fault+0x61/0x270
do_async_page_fault+0x19/0x90
async_page_fault+0x25/0x30
This always happens when the main userfault selftest thread is running
clone() while glibc runs either mprotect or mmap (both taking mmap_sem
down_write()) to allocate the thread stack of the background threads,
while locking/userfault threads already run at full throttle and are
susceptible to false wakeups that may cause handle_userfault() to return
before than expected (which results in graceful SIGBUS at the next
attempt).
This was reproduced only with >=32 CPUs because the loop to start the
thread where clone() is too quick with fewer CPUs, while with 32 CPUs
there's already significant activity on ~32 locking and userfault
threads when the last background threads are started with clone().
This >=32 CPUs SMP race condition is likely reproducible only with the
selftest because of the much heavier userfault load it generates if
compared to real apps.
We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a
patch floating around that provides it also hidden this problem but in
reality only is successfully at hiding the problem.
False wakeups could still happen again the second time
handle_userfault() is invoked, even if it's a so rare race condition
that getting false wakeups twice in a row is impossible to reproduce.
This full fix is needed for correctness, the only alternative would be
to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP
support can stick to a strict "one more" VM_FAULT_RETRY logic (no need
of returning it infinite times to avoid the SIGBUS).
Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 24 Jan 2017 23:18:07 +0000 (15:18 -0800)]
proc: add a schedule point in proc_pid_readdir()
[ Upstream commit
3ba4bceef23206349d4130ddf140819b365de7c8 ]
We have seen proc_pid_readdir() invocations holding cpu for more than 50
ms. Add a cond_resched() to be gentle with other tasks.
[akpm@linux-foundation.org: coding style fix]
Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 24 Jan 2017 23:18:43 +0000 (15:18 -0800)]
frv: add missing atomic64 operations
[ Upstream commit
4180c4c170a5a33b9987b314d248a9d572d89ab0 ]
Some more atomic64 operations were missing and as a result frv
allmodconfig was failing. Add the missing operations.
Link: http://lkml.kernel.org/r/1485193844-12850-1-git-send-email-sudip.mukherjee@codethink.co.uk
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 24 Jan 2017 23:18:21 +0000 (15:18 -0800)]
frv: add atomic64_add_unless()
[ Upstream commit
545d58f677b21401f6de1ac12c25cc109f903ace ]
The build of frv allmodconfig was failing with the error:
lib/atomic64_test.c:209:9: error:
implicit declaration of function 'atomic64_add_unless'
All the atomic64 operations were defined in frv, but
atomic64_add_unless() was not done.
Implement atomic64_add_unless() as done in other arches.
Link: http://lkml.kernel.org/r/1484781236-6698-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coly Li [Tue, 24 Jan 2017 23:18:46 +0000 (15:18 -0800)]
romfs: use different way to generate fsid for BLOCK or MTD
[ Upstream commit
f598f82e204ec0b17797caaf1b0311c52d43fb9a ]
Commit
8a59f5d25265 ("fs/romfs: return f_fsid for statfs(2)") generates
a 64bit id from sb->s_bdev->bd_dev. This is only correct when romfs is
defined with CONFIG_ROMFS_ON_BLOCK. If romfs is only defined with
CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev
will triger an oops.
Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y,
both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined.
Therefore when calling huge_encode_dev() to generate a 64bit id, I use
the follow order to choose parameter,
- CONFIG_ROMFS_ON_BLOCK defined
use sb->s_bdev->bd_dev
- CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined
use sb->s_dev when,
- both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined
leave id as 0
When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev
is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index,
otherwise sb->s_dev is 0.
This is a try-best effort to generate a uniq file system ID, if all the
above conditions are not meet, f_fsid of this romfs instance will be 0.
Generally only one romfs can be built on single MTD block device, this
method is enough to identify multiple romfs instances in a computer.
Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.de
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Nong Li <nongli1031@gmail.com>
Tested-by: Nong Li <nongli1031@gmail.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Tue, 24 Jan 2017 23:18:49 +0000 (15:18 -0800)]
mn10300: fix build error of missing fpu_save()
[ Upstream commit
3705ccfdd1e8b539225ce20e3925a945cc788d67 ]
When CONFIG_FPU is not enabled on arch/mn10300, <asm/switch_to.h> causes
a build error with a call to fpu_save():
kernel/built-in.o: In function `.L410':
core.c:(.sched.text+0x28a): undefined reference to `fpu_save'
Fix this by including <asm/fpu.h> in <asm/switch_to.h> so that an empty
static inline fpu_save() is defined.
Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Tue, 24 Jan 2017 15:18:58 +0000 (09:18 -0600)]
usb: musb: Fix external abort on non-linefetch for musb_irq_work()
[ Upstream commit
3ba7b7795b7e8889af1377904c55c7fae9e0c775 ]
While testing musb host mode cable plugging on a BeagleBone, I came across this
error:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd1dcfc60
...
[<
bf668390>] (musb_default_readb [musb_hdrc]) from [<
bf668578>] (musb_irq_work+0x1c/0x180 [musb_hdrc])
[<
bf668578>] (musb_irq_work [musb_hdrc]) from [<
c0156554>] (process_one_work+0x2b4/0x808)
[<
c0156554>] (process_one_work) from [<
c015767c>] (worker_thread+0x3c/0x550)
[<
c015767c>] (worker_thread) from [<
c015d568>] (kthread+0x104/0x148)
[<
c015d568>] (kthread) from [<
c01078d0>] (ret_from_fork+0x14/0x24)
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Tue, 24 Jan 2017 06:01:53 +0000 (14:01 +0800)]
sctp: sctp_addr_id2transport should verify the addr before looking up assoc
[ Upstream commit
6f29a130613191d3c6335169febe002cba00edf5 ]
sctp_addr_id2transport is a function for sockopt to look up assoc by
address. As the address is from userspace, it can be a v4-mapped v6
address. But in sctp protocol stack, it always handles a v4-mapped
v6 address as a v4 address. So it's necessary to convert it to a v4
address before looking up assoc by address.
This patch is to fix it by calling sctp_verify_addr in which it can do
this conversion before calling sctp_endpoint_lookup_assoc, just like
what sctp_sendmsg and __sctp_connect do for the address from users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Tue, 24 Jan 2017 06:05:16 +0000 (14:05 +0800)]
sctp: sctp gso should set feature with NETIF_F_SG when calling skb_segment
[ Upstream commit
5207f3996338e1db71363fe381c81aaf1e54e4e3 ]
Now sctp gso puts segments into skb's frag_list, then processes these
segments in skb_segment. But skb_segment handles them only when gs is
enabled, as it's in the same branch with skb's frags.
Although almost all the NICs support sg other than some old ones, but
since commit
1e16aa3ddf86 ("net: gso: use feature flag argument in all
protocol gso handlers"), features &= skb->dev->hw_enc_features, and
xfrm_output_gso call skb_segment with features = 0, which means sctp
gso would call skb_segment with sg = 0, and skb_segment would not work
as expected.
This patch is to fix it by setting features param with NETIF_F_SG when
calling skb_segment so that it can go the right branch to process the
skb's frag_list.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Chan [Wed, 25 Jan 2017 07:55:09 +0000 (02:55 -0500)]
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
[ Upstream commit
90c694bb71819fb5bd3501ac397307d7e41ddeca ]
bnxt_get_port_module_status() calls bnxt_update_link() which expects
RTNL to be held. In bnxt_sp_task() that does not hold RTNL, we need to
call it with a prior call to bnxt_rtnl_lock_sp() and the call needs to
be moved to the end of bnxt_sp_task().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Chan [Wed, 25 Jan 2017 07:55:08 +0000 (02:55 -0500)]
bnxt_en: Fix RTNL lock usage on bnxt_update_link().
[ Upstream commit
0eaa24b971ae251ae9d3be23f77662a655532063 ]
bnxt_update_link() is called from multiple code paths. Most callers,
such as open, ethtool, already hold RTNL. Only the caller bnxt_sp_task()
does not. So it is a bug to take RTNL inside bnxt_update_link().
Fix it by removing the RTNL inside bnxt_update_link(). The function
now expects the caller to always hold RTNL.
In bnxt_sp_task(), call bnxt_rtnl_lock_sp() before calling
bnxt_update_link(). We also need to move the call to the end of
bnxt_sp_task() since it will be clearing the BNXT_STATE_IN_SP_TASK bit.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Chan [Thu, 17 Nov 2016 02:13:08 +0000 (21:13 -0500)]
bnxt_en: Enhance autoneg support.
[ Upstream commit
286ef9d64ea7435a1e323d12b44a309e15cbff0e ]
On some dual port NICs, the speed setting on one port can affect the
available speed on the other port. Add logic to detect these changes
and adjust the advertised speed settings when necessary.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Chan [Wed, 25 Jan 2017 07:55:07 +0000 (02:55 -0500)]
bnxt_en: Fix bnxt_reset() in the slow path task.
[ Upstream commit
a551ee94ea723b4af9b827c7460f108bc13425ee ]
In bnxt_sp_task(), we set a bit BNXT_STATE_IN_SP_TASK so that bnxt_close()
will synchronize and wait for bnxt_sp_task() to finish. Some functions
in bnxt_sp_task() require us to clear BNXT_STATE_IN_SP_TASK and then
acquire rtnl_lock() to prevent race conditions.
There are some bugs related to this logic. This patch refactors the code
to have common bnxt_rtnl_lock_sp() and bnxt_rtnl_unlock_sp() to handle
the RTNL and the clearing/setting of the bit. Multiple functions will
need the same logic. We also need to move bnxt_reset() to the end of
bnxt_sp_task(). Functions that clear BNXT_STATE_IN_SP_TASK must be the
last functions to be called in bnxt_sp_task(). The common scheme will
handle the condition properly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Crispin [Wed, 25 Jan 2017 08:20:55 +0000 (09:20 +0100)]
net-next: ethernet: mediatek: change the compatible string
[ Upstream commit
8b901f6bbcf12a20e43105d161bedde093431e61 ]
When the binding was defined, I was not aware that mt2701 was an earlier
version of the SoC. For sake of consistency, the ethernet driver should
use mt2701 inside the compat string as this is the earliest SoC with the
ethernet core.
The ethernet driver is currently of no real use until we finish and
upstream the DSA driver. There are no users of this binding yet. It should
be safe to fix this now before it is too late and we need to provide
backward compatibility for the mt7623-eth compat string.
Reported-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Thu, 26 Jan 2017 01:38:32 +0000 (09:38 +0800)]
r8152: avoid start_xmit to schedule napi when napi is disabled
[ Upstream commit
de9bf29dd6e4a8a874cb92f8901aed50a9d0b1d3 ]
Stop the tx when the napi is disabled to prevent napi_schedule() is
called.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Fri, 20 Jan 2017 06:33:55 +0000 (14:33 +0800)]
r8152: fix rtl8152_post_reset function
[ Upstream commit
2c561b2b728ca4013e76d6439bde2c137503745e ]
The rtl8152_post_reset() should sumbit rx urb and interrupt transfer,
otherwise the rx wouldn't work and the linking change couldn't be
detected.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Thu, 26 Jan 2017 01:38:33 +0000 (09:38 +0800)]
r8152: re-schedule napi for tx
[ Upstream commit
248b213ad908b88db15941202ef7cb7eb137c1a0 ]
Re-schedule napi after napi_complete() for tx, if it is necessay.
In r8152_poll(), if the tx is completed after tx_bottom() and before
napi_complete(), the scheduling of napi would be lost. Then, no
one handles the next tx until the next napi_schedule() is called.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Thu, 26 Jan 2017 01:38:34 +0000 (09:38 +0800)]
r8152: check rx after napi is enabled
[ Upstream commit
7489bdadb7d17d3c81e39b85688500f700beb790 ]
Schedule the napi after napi_enable() for rx, if it is necessary.
If the rx is completed when napi is disabled, the sheduling of napi
would be lost. Then, no one handles the rx packet until next napi
is scheduled.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Thu, 26 Jan 2017 01:38:31 +0000 (09:38 +0800)]
r8152: avoid start_xmit to call napi_schedule during autosuspend
[ Upstream commit
26afec39306926654e9cd320f19bbf3685bb0997 ]
Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit()
from calling napi_schedule() directly during runtime suspend.
After calling napi_disable() or clearing the flag of WORK_ENABLE,
scheduling the napi is useless.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parav Pandit [Thu, 19 Jan 2017 15:55:08 +0000 (09:55 -0600)]
nvmet-rdma: Fix missing dma sync to nvme data structures
[ Upstream commit
748ff8408f8e208f279ba221e5c12612fbb4dddb ]
This patch performs dma sync operations on nvme_command
and nvme_completion.
nvme_command is synced
(a) on receiving of the recv queue completion for cpu access.
(b) before posting recv wqe back to rdma adapter for device access.
nvme_completion is synced
(a) on receiving of the recv queue completion of associated
nvme_command for cpu access.
(b) before posting send wqe to rdma adapter for device access.
This patch is generated for git://git.infradead.org/nvme-fabrics.git
Branch: nvmf-4.10
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 26 Jan 2017 20:14:52 +0000 (15:14 -0500)]
nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED"
[ Upstream commit
406dab8450ec76eca88a1af2fc15d18a2b36ca49 ]
Lock sequence IDs are bumped in decode_lock by calling
nfs_increment_seqid(). nfs_increment_sequid() does not use the
seqid_mutating_err() function fixed in commit
059aa7348241 ("Don't
increment lock sequence ID after NFS4ERR_MOVED").
Fixes:
059aa7348241 ("Don't increment lock sequence ID after ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kazuya Mizuguchi [Thu, 26 Jan 2017 13:29:27 +0000 (14:29 +0100)]
ravb: unmap descriptors when freeing rings
[ Upstream commit
a47b70ea86bdeb3091341f5ae3ef580f1a1ad822 ]
"swiotlb buffer is full" errors occur after repeated initialisation of a
device - f.e. suspend/resume or ip link set up/down. This is because memory
mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit()
is not released. Resolve this problem by unmapping descriptors when
freeing rings.
Fixes:
c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[simon: reworked]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Y.C. Chen [Thu, 26 Jan 2017 01:45:40 +0000 (09:45 +0800)]
drm/ast: Fixed system hanged if disable P2A
[ Upstream commit
6c971c09f38704513c426ba6515f22fb3d6c87d5 ]
The original ast driver will access some BMC configuration through P2A bridge
that can be disabled since AST2300 and after.
It will cause system hanged if P2A bridge is disabled.
Here is the update to fix it.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Ujfalusi [Mon, 15 May 2017 09:04:31 +0000 (12:04 +0300)]
drm/nouveau: Fix drm poll_helper handling
[ Upstream commit
9a2eba337cacefc95b97c2726e3efdd435b3460e ]
Commit
cae9ff036eea effectively disabled the drm poll_helper by checking
the wrong flag to see if the driver should enable the poll or not:
mode_config.poll_enabled is only set to true by poll_init and it is not
indicating if the poll is enabled or not.
nouveau_display_create() will initialize the poll and going to disable it
right away. After poll_init() the mode_config.poll_enabled will be true,
but the poll itself is disabled.
To avoid the race caused by calling the poll_enable() from different paths,
this patch will enable the poll from one place, in the
nouveau_display_hpd_work().
In case the pm_runtime is disabled we will enable the poll in
nouveau_drm_load() once.
Fixes:
cae9ff036eea ("drm/nouveau: Don't enabling polling twice on runtime resume")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Thu, 12 Jan 2017 02:25:23 +0000 (21:25 -0500)]
drm/nouveau: Don't enabling polling twice on runtime resume
[ Upstream commit
cae9ff036eea577856d5b12860b4c79c5e71db4a ]
As it turns out, on cards that actually have CRTCs on them we're already
calling drm_kms_helper_poll_enable(drm_dev) from
nouveau_display_resume() before we call it in
nouveau_pmops_runtime_resume(). This leads us to accidentally trying to
enable polling twice, which results in a potential deadlock between the
RPM locks and drm_dev->mode_config.mutex if we end up trying to enable
polling the second time while output_poll_execute is running and holding
the mode_config lock. As such, make sure we only enable polling in
nouveau_pmops_runtime_resume() if we need to.
This fixes hangs observed on the ThinkPad W541
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kilian Singer <kilian.singer@quantumtechnology.info>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Thu, 12 Jan 2017 02:25:24 +0000 (21:25 -0500)]
drm/nouveau: Handle fbcon suspend/resume in seperate worker
[ Upstream commit
15266ae38fe09dae07bd8812cb7a7717b1e1d992 ]
Resuming from RPM can happen while already holding
dev->mode_config.mutex. This means we can't actually handle fbcon in
any RPM resume workers, since restoring fbcon requires grabbing
dev->mode_config.mutex again. So move the fbcon suspend/resume code into
it's own worker, and rely on that instead to avoid deadlocking.
This fixes more deadlocks for runtime suspending the GPU on the ThinkPad
W541. Reproduction recipe:
- Get a machine with both optimus and a nvidia card with connectors
attached to it
- Wait for the nvidia GPU to suspend
- Attempt to manually reprobe any of the connectors on the nvidia GPU
using sysfs
- *deadlock*
[airlied: use READ_ONCE to address Hans's comment]
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kilian Singer <kilian.singer@quantumtechnology.info>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 21 Nov 2016 16:50:54 +0000 (17:50 +0100)]
drm/nouveau: Rename acpi_work to hpd_work
[ Upstream commit
81280d0e24e76c35f40f997af26c779bcb10b04d ]
We need to call drm_helper_hpd_irq_event() on resume to properly detect
monitor connection / disconnection on some laptops. For runtime-resume
(which gets called on resume from normal suspend too) we must call
drm_helper_hpd_irq_event() from a workqueue to avoid a deadlock.
Rename acpi_work to hpd_work, and move it out of the #ifdef CONFIG_ACPI
blocks to make it suitable for generic work.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Wed, 9 Nov 2016 17:17:44 +0000 (18:17 +0100)]
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE
[ Upstream commit
3a6536c51d5db3adf58dcd466a3aee6233b58544 ]
Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE
acpi-video event when an external device gets plugged in (and again on
modesets on that connector), the default behavior in the acpi-video
driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which
causes e.g. gnome-settings-daemon to ask us to rescan the connectors
(good), but also causes g-s-d to switch to mirror mode on a newly plugged
monitor rather then using the monitor to extend the desktop (bad)
as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop
vs mirror mode.
More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on
changing the mode on the connector, which cause g-s-d to switch
between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE
event and we end up with an endless loop.
This commit fixes this by adding an acpi notifier block handler to
nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and:
1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event()
on them, this is necessary in some cases for the GPU to detect connector
hotplug events while runtime suspended
2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus
KEY_SWITCHVIDEOMODE key-press event
There already is another acpi notifier block handler registered in
drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not
suitable since that one gets unregistered on runtime suspend, and
we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Schultz [Fri, 27 Jan 2017 09:40:56 +0000 (10:40 +0100)]
gtp: add genl family modules alias
[ Upstream commit
ab729823ec16aef384f09fd2cffe0b3d3f6e6cba ]
Auto-load the module when userspace asks for the gtp netlink
family.
Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Harald Welte <laforge@netfilter.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Nyekjaer [Fri, 27 Jan 2017 07:46:23 +0000 (08:46 +0100)]
net: phy: micrel: add support for KSZ8795
[ Upstream commit
9d162ed69f51cbd9ee5a0c7e82aba7acc96362ff ]
This is adds support for the PHYs in the KSZ8795 5port managed switch.
It will allow to detect the link between the switch and the soc
and uses the same read_status functions as the KSZ8873MLL switch.
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Tue, 3 Jan 2017 21:55:50 +0000 (22:55 +0100)]
parisc, parport_gsc: Fixes for printk continuation lines
[ Upstream commit
83b5d1e3d3013dbf90645a5d07179d018c8243fa ]
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Or Gerlitz [Thu, 12 Jan 2017 11:04:01 +0000 (13:04 +0200)]
net/mlx5: Return EOPNOTSUPP when failing to get steering name-space
[ Upstream commit
eff596da48784316ccb83bef82bc1213b512d5e0 ]
When we fail to retrieve a hardware steering name-space, the returned error
code should say that this operation is not supported. Align the various
places in the driver where this call is made to this convention.
Also, make sure to warn when we fail to retrieve a SW (ANCHOR) name-space.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Or Gerlitz [Wed, 11 Jan 2017 17:39:42 +0000 (19:39 +0200)]
net/mlx5: E-Switch, Err when retrieving steering name-space fails
[ Upstream commit
5403dc703ff277f8a2a12a83ac820750485f13b3 ]
Make sure to return error when we failed retrieving the FDB steering
name space. Also, while around, correctly print the error when mode
change revert fails in the warning message.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 29 Jan 2017 21:50:06 +0000 (13:50 -0800)]
drm/i915: Check for NULL i915_vma in intel_unpin_fb_obj()
[ Upstream commit
39cb2c9a316e77f6dfba96c543e55b6672d5a37e ]
I've seen this trigger twice now, where the i915_gem_object_to_ggtt()
call in intel_unpin_fb_obj() returns NULL, resulting in an oops
immediately afterwards as the (inlined) call to i915_vma_unpin_fence()
tries to dereference it.
It seems to be some race condition where the object is going away at
shutdown time, since both times happened when shutting down the X
server. The call chains were different:
- VT ioctl(KDSETMODE, KD_TEXT):
intel_cleanup_plane_fb+0x5b/0xa0 [i915]
drm_atomic_helper_cleanup_planes+0x6f/0x90 [drm_kms_helper]
intel_atomic_commit_tail+0x749/0xfe0 [i915]
intel_atomic_commit+0x3cb/0x4f0 [i915]
drm_atomic_commit+0x4b/0x50 [drm]
restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper]
drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper]
drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper]
intel_fbdev_set_par+0x18/0x70 [i915]
fb_set_var+0x236/0x460
fbcon_blank+0x30f/0x350
do_unblank_screen+0xd2/0x1a0
vt_ioctl+0x507/0x12a0
tty_ioctl+0x355/0xc30
do_vfs_ioctl+0xa3/0x5e0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x13/0x94
- i915 unpin_work workqueue:
intel_unpin_work_fn+0x58/0x140 [i915]
process_one_work+0x1f1/0x480
worker_thread+0x48/0x4d0
kthread+0x101/0x140
and this patch purely papers over the issue by adding a NULL pointer
check and a WARN_ON_ONCE() to avoid the oops that would then generally
make the machine unresponsive.
Other callers of i915_gem_object_to_ggtt() seem to also check for the
returned pointer being NULL and warn about it, so this clearly has
happened before in other places.
[ Reported it originally to the i915 developers on Jan 8, applying the
ugly workaround on my own now after triggering the problem for the
second time with no feedback.
This is likely to be the same bug reported as
https://bugs.freedesktop.org/show_bug.cgi?id=98829
https://bugs.freedesktop.org/show_bug.cgi?id=99134
which has a patch for the underlying problem, but it hasn't gotten to
me, so I'm applying the workaround. ]
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Fri, 27 Jan 2017 22:07:30 +0000 (01:07 +0300)]
net: adaptec: starfire: add checks for dma mapping errors
[ Upstream commit
d1156b489fa734d1af763d6a07b1637c01bb0aed ]
init_ring(), refill_rx_ring() and start_tx() don't check
if mapping dma memory succeed.
The patch adds the checks and failure handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jisheng Zhang [Mon, 23 Jan 2017 07:15:32 +0000 (15:15 +0800)]
pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES
[ Upstream commit
e82d02580af45663fad6d3596e4344c606e81e10 ]
This should be a typo.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Thu, 12 Jan 2017 16:15:56 +0000 (17:15 +0100)]
drm: Don't race connector registration
[ Upstream commit
e6e7b48b295afa5a5ab440de0a94d9ad8b3ce2d0 ]
I was under the misconception that the sysfs dev stuff can be fully
set up, and then registered all in one step with device_add. That's
true for properties and property groups, but not for parents and child
devices. Those must be fully registered before you can register a
child.
Add a bit of tracking to make sure that asynchronous mst connector
hotplugging gets this right. For consistency we rely upon the implicit
barriers of the connector->mutex, which is taken anyway, to ensure
that at least either the connector or device registration call will
work out.
Mildly tested since I can't reliably reproduce this on my mst box
here.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484237756-2720-1-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Sun, 18 Dec 2016 13:35:45 +0000 (14:35 +0100)]
drm: prevent double-(un)registration for connectors
[ Upstream commit
e73ab00e9a0f1731f34d0620a9c55f5c30c4ad4e ]
If we're unlucky then the registration from a hotplugged connector
might race with the final registration step on driver load. And since
MST topology discover is asynchronous that's even somewhat likely.
v2: Also update the kerneldoc for @registered!
v3: Review from Chris:
- Improve kerneldoc for late_register/early_unregister callbacks.
- Use mutex_destroy.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218133545.2106-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Tue, 10 Jan 2017 11:44:54 +0000 (09:44 -0200)]
cec: fix wrong last_la determination
[ Upstream commit
f9f96fc10c09ca16e336854c08bc1563eed97985 ]
Due to an incorrect condition the last_la used for the initial attempt at
claiming a logical address could be wrong.
The last_la wasn't converted to a mask when ANDing with type2mask, so that
test was broken.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Thu, 26 Jan 2017 17:24:07 +0000 (19:24 +0200)]
pinctrl: baytrail: Rectify debounce support (part 2)
[ Upstream commit
827e1579e1d5cb66e340e7be1944b825b542bbdf ]
The commit
04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support")
almost fixes the logic of debuonce but missed couple of things, i.e.
typo in mask when disabling debounce and lack of enabling it back.
This patch addresses above issues.
Reported-by: Jean Delvare <jdelvare@suse.de>
Fixes:
04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arseny Solokha [Sun, 29 Jan 2017 12:52:20 +0000 (19:52 +0700)]
gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page
[ Upstream commit
4af0e5bb95ee3ba5ea4bd7dbb94e1648a5279cc9 ]
In spite of switching to paged allocation of Rx buffers, the driver still
called dma_unmap_single() in the Rx queues tear-down path.
The DMA region unmapping code in free_skb_rx_queue() basically predates
the introduction of paged allocation to the driver. While being refactored,
it apparently hasn't reflected the change in the DMA API usage by its
counterpart gfar_new_page().
As a result, setting an interface to the DOWN state now yields the following:
# ip link set eth2 down
fsl-gianfar
ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40]
------------[ cut here ]------------
WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28
CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1
task:
dee73400 task.stack:
dede2000
NIP:
c02101e8 LR:
c02101e8 CTR:
c0260d74
REGS:
dede3bb0 TRAP: 0700 Tainted: G O (4.9.5)
MSR:
00021000 <CE,ME> CR:
28002222 XER:
00000000
GPR00:
c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000
GPR08:
00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000
GPR16:
00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000
GPR24:
c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540
NIP [
c02101e8] check_unmap+0x8e0/0xa28
LR [
c02101e8] check_unmap+0x8e0/0xa28
Call Trace:
[
dede3c60] [
c02101e8] check_unmap+0x8e0/0xa28 (unreliable)
[
dede3cb0] [
c02103b8] debug_dma_unmap_page+0x88/0x9c
[
dede3d30] [
c02dffbc] free_skb_resources+0x2c4/0x404
[
dede3d80] [
c02e39b4] gfar_close+0x24/0xc8
[
dede3da0] [
c0361550] __dev_close_many+0xa0/0xf8
[
dede3dd0] [
c03616f0] __dev_close+0x2c/0x4c
[
dede3df0] [
c036b1b8] __dev_change_flags+0xa0/0x174
[
dede3e10] [
c036b2ac] dev_change_flags+0x20/0x60
[
dede3e30] [
c03e130c] devinet_ioctl+0x540/0x824
[
dede3e90] [
c0347dcc] sock_ioctl+0x134/0x298
[
dede3eb0] [
c0111814] do_vfs_ioctl+0xac/0x854
[
dede3f20] [
c0111ffc] SyS_ioctl+0x40/0x74
[
dede3f40] [
c000f290] ret_from_syscall+0x0/0x3c
--- interrupt: c01 at 0xff45da0
LR = 0xff45cd0
Instruction dump:
811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052
386309ac 90c10008 4cc63182 4826b845 <
0fe00000>
4bfffa60 3c80c052 388402c4
---[ end trace
695ae6d7ac1d0c47 ]---
Mapped at:
[<
c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248
[<
c02e3ef0>] startup_gfar+0x368/0x570
[<
c036aeb4>] __dev_open+0xdc/0x150
[<
c036b1b8>] __dev_change_flags+0xa0/0x174
[<
c036b2ac>] dev_change_flags+0x20/0x60
Even though the issue was discovered in 4.9 kernel, the code in question
is identical in the current net and net-next trees.
Fixes:
75354148ce69 ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jack Morgenstein [Mon, 30 Jan 2017 13:11:45 +0000 (15:11 +0200)]
net/mlx4_core: Avoid command timeouts during VF driver device shutdown
[ Upstream commit
d585df1c5ccf995fcee910705ad7a9cdd11d4152 ]
Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.
In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.
The result is that the VF driver on the VM will experience a command
timeout during the shutdown process when the Hypervisor does not deliver
a command-completion event to the VM.
To avoid FW command timeouts on the VM when the driver's shutdown method
is invoked, we detect the absence of the VF's comm channel at the very
start of the shutdown process. If the comm-channel has already been
disabled, we cause all FW commands during the device shutdown process to
immediately return success (and thus avoid all command timeouts).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Skeggs [Wed, 24 May 2017 01:54:09 +0000 (21:54 -0400)]
drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers
[ Upstream commit
96692b097ba76d0c637ae8af47b29c73da33c9d0 ]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Skeggs [Wed, 24 May 2017 01:54:08 +0000 (21:54 -0400)]
drm/nouveau: prevent userspace from deleting client object
[ Upstream commit
c966b6279f610a24ac1d42dcbe30e10fa61220b2 ]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dimitris Michailidis [Wed, 24 May 2017 01:54:07 +0000 (21:54 -0400)]
ipv6: fix flow labels when the traffic class is non-0
[ Upstream commit
90427ef5d2a4b9a24079889bf16afdcdaebc4240 ]
ip6_make_flowlabel() determines the flow label for IPv6 packets. It's
supposed to be passed a flow label, which it returns as is if non-0 and
in some other cases, otherwise it calculates a new value.
The problem is callers often pass a flowi6.flowlabel, which may also
contain traffic class bits. If the traffic class is non-0
ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and
returns the whole thing. Thus it can return a 'flow label' longer than
20b and the low 20b of that is typically 0 resulting in packets with 0
label. Moreover, different packets of a flow may be labeled differently.
For a TCP flow with ECN non-payload and payload packets get different
labels as exemplified by this pair of consecutive packets:
(pure ACK)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
0110 .... = Version: 6
.... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
.... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
.... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
.... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49
Payload Length: 32
Next Header: TCP (6)
(payload)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
0110 .... = Version: 6
.... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
.... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
.... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
.... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000
Payload Length: 688
Next Header: TCP (6)
This patch allows ip6_make_flowlabel() to be passed more than just a
flow label and has it extract the part it really wants. This was simpler
than modifying the callers. With this patch packets like the above become
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
0110 .... = Version: 6
.... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
.... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
.... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
.... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
Payload Length: 32
Next Header: TCP (6)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
0110 .... = Version: 6
.... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
.... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
.... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
.... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
Payload Length: 688
Next Header: TCP (6)
Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 24 May 2017 01:54:06 +0000 (21:54 -0400)]
FS-Cache: Initialise stores_lock in netfs cookie
[ Upstream commit
62deb8187d116581c88c69a2dd9b5c16588545d4 ]
Initialise the stores_lock in fscache netfs cookies. Technically, it
shouldn't be necessary, since the netfs cookie is an index and stores no
data, but initialising it anyway adds insignificant overhead.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 24 May 2017 01:54:05 +0000 (21:54 -0400)]
fscache: Clear outstanding writes when disabling a cookie
[ Upstream commit
6bdded59c8933940ac7e5b416448276ac89d1144 ]
fscache_disable_cookie() needs to clear the outstanding writes on the
cookie it's disabling because they cannot be completed after.
Without this, fscache_nfs_open_file() gets stuck because it disables the
cookie when the file is opened for writing but can't uncache the pages till
afterwards - otherwise there's a race between the open routine and anyone
who already has it open R/O and is still reading from it.
Looking in /proc/pid/stack of the offending process shows:
[<
ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache]
[<
ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache]
[<
ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs]
[<
ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4]
[<
ffffffff8117350e>] do_dentry_open+0x16d/0x2b7
[<
ffffffff811743ac>] vfs_open+0x5c/0x65
[<
ffffffff81184185>] path_openat+0x785/0x8fb
[<
ffffffff81184343>] do_filp_open+0x48/0x9e
[<
ffffffff81174710>] do_sys_open+0x13b/0x1cb
[<
ffffffff811747b9>] SyS_open+0x19/0x1b
[<
ffffffff81001c44>] do_syscall_64+0x80/0x17a
[<
ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a
[<
ffffffffffffffff>] 0xffffffffffffffff
Reported-by: Jianhong Yin <jiyin@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 24 May 2017 01:54:04 +0000 (21:54 -0400)]
fscache: Fix dead object requeue
[ Upstream commit
e26bfebdfc0d212d366de9990a096665d5c0209a ]
Under some circumstances, an fscache object can become queued such that it
fscache_object_work_func() can be called once the object is in the
OBJECT_DEAD state. This results in the kernel oopsing when it tries to
invoke the handler for the state (which is hard coded to 0x2).
The way this comes about is something like the following:
(1) The object dispatcher is processing a work state for an object. This
is done in workqueue context.
(2) An out-of-band event comes in that isn't masked, causing the object to
be queued, say EV_KILL.
(3) The object dispatcher finishes processing the current work state on
that object and then sees there's another event to process, so,
without returning to the workqueue core, it processes that event too.
It then follows the chain of events that initiates until we reach
OBJECT_DEAD without going through a wait state (such as
WAIT_FOR_CLEARANCE).
At this point, object->events may be 0, object->event_mask will be 0
and oob_event_mask will be 0.
(4) The object dispatcher returns to the workqueue processor, and in due
course, this sees that the object's work item is still queued and
invokes it again.
(5) The current state is a work state (OBJECT_DEAD), so the dispatcher
jumps to it - resulting in an OOPS.
When I'm seeing this, the work state in (1) appears to have been either
LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is
fscache_osm_lookup_oob).
The window for (2) is very small:
(A) object->event_mask is cleared whilst the event dispatch process is
underway - though there's no memory barrier to force this to the top
of the function.
The window, therefore is from the time the object was selected by the
workqueue processor and made requeueable to the time the mask was
cleared.
(B) fscache_raise_event() will only queue the object if it manages to set
the event bit and the corresponding event_mask bit was set.
The enqueuement is then deferred slightly whilst we get a ref on the
object and get the per-CPU variable for workqueue congestion. This
slight deferral slightly increases the probability by allowing extra
time for the workqueue to make the item requeueable.
Handle this by giving the dead state a processor function and checking the
for the dead state address rather than seeing if the processor function is
address 0x2. The dead state processor function can then set a flag to
indicate that it's occurred and give a warning if it occurs more than once
per object.
If this race occurs, an oops similar to the following is seen (note the RIP
value):
BUG: unable to handle kernel NULL pointer dereference at
0000000000000002
IP: [<
0000000000000002>] 0x1
PGD 0
Oops: 0010 [#1] SMP
Modules linked in: ...
CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015
Workqueue: fscache_object fscache_object_work_func [fscache]
task:
ffff880302b63980 ti:
ffff880717544000 task.ti:
ffff880717544000
RIP: 0010:[<
0000000000000002>] [<
0000000000000002>] 0x1
RSP: 0018:
ffff880717547df8 EFLAGS:
00010202
RAX:
ffffffffa0368640 RBX:
ffff880edf7a4480 RCX:
dead000000200200
RDX:
0000000000000002 RSI:
00000000ffffffff RDI:
ffff880edf7a4480
RBP:
ffff880717547e18 R08:
0000000000000000 R09:
dfc40a25cb3a4510
R10:
dfc40a25cb3a4510 R11:
0000000000000400 R12:
0000000000000000
R13:
ffff880edf7a4510 R14:
ffff8817f6153400 R15:
0000000000000600
FS:
0000000000000000(0000) GS:
ffff88181f420000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000002 CR3:
000000000194a000 CR4:
00000000001407e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Stack:
ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00
ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000
ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900
Call Trace:
[<
ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache]
[<
ffffffff8109d5db>] process_one_work+0x17b/0x470
[<
ffffffff8109e4ac>] worker_thread+0x21c/0x400
[<
ffffffff8109e290>] ? rescuer_thread+0x400/0x400
[<
ffffffff810a5acf>] kthread+0xcf/0xe0
[<
ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140
[<
ffffffff816460d8>] ret_from_fork+0x58/0x90
[<
ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeremy McNicoll <jeremymc@redhat.com>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dimitris Michailidis [Wed, 24 May 2017 01:54:02 +0000 (21:54 -0400)]
net: fix ndo_features_check/ndo_fix_features comment ordering
[ Upstream commit
1a2a14444d32b89b28116daea86f63ced1716668 ]
Commit
cdba756f5803a2 ("net: move ndo_features_check() close to
ndo_start_xmit()") inadvertently moved the doc comment for
.ndo_fix_features instead of .ndo_features_check. Fix the comment
ordering.
Fixes:
cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()")
Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Thu, 9 Feb 2017 03:05:26 +0000 (19:05 -0800)]
net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()
[ Upstream commit
6d9f66ac7fec2a6ccd649e5909806dfe36f1fc25 ]
The Generic PHY drivers gets assigned after we checked that the current
PHY driver is NULL, so we need to check a few things before we can
safely dereference d->driver. This would be causing a NULL deference to
occur when a system binds to the Generic PHY driver. Update
phy_attach_direct() to do the following:
- grab the driver module reference after we have assigned the Generic
PHY drivers accordingly, and remember we came from the generic PHY
path
- update the error path to clean up the module reference in case the
Generic PHY probe function fails
- split the error path involving phy_detacht() to avoid double free/put
since phy_detach() does all the clean up
- finally, have phy_detach() drop the module reference count before we
call device_release_driver() for the Generic PHY driver case
Fixes:
cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mao Wenan [Wed, 24 May 2017 01:54:00 +0000 (21:54 -0400)]
net: phy: Fix lack of reference count on PHY driver
[ Upstream commit
cafe8df8b9bc9aa3dffa827c1a6757c6cd36f657 ]
There is currently no reference count being held on the PHY driver,
which makes it possible to remove the PHY driver module while the PHY
state machine is running and polling the PHY. This could cause crashes
similar to this one to show up:
[ 43.361162] BUG: unable to handle kernel NULL pointer dereference at
0000000000000140
[ 43.361162] IP: phy_state_machine+0x32/0x490
[ 43.361162] PGD 59dc067
[ 43.361162] PUD 0
[ 43.361162]
[ 43.361162] Oops: 0000 [#1] SMP
[ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom]
[ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415
[ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 43.361162] Workqueue: events_power_efficient phy_state_machine
[ 43.361162] task:
ffff880006782b80 task.stack:
ffffc90000184000
[ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490
[ 43.361162] RSP: 0018:
ffffc90000187e18 EFLAGS:
00000246
[ 43.361162] RAX:
0000000000000000 RBX:
ffff8800059e53c0 RCX:
ffff880006a15c60
[ 43.361162] RDX:
ffff880006782b80 RSI:
0000000000000000 RDI:
ffff8800059e5428
[ 43.361162] RBP:
ffffc90000187e48 R08:
ffff880006a15c40 R09:
0000000000000000
[ 43.361162] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8800059e5428
[ 43.361162] R13:
ffff8800059e5000 R14:
0000000000000000 R15:
ffff880006a15c40
[ 43.361162] FS:
0000000000000000(0000) GS:
ffff880006a00000(0000)
knlGS:
0000000000000000
[ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 43.361162] CR2:
0000000000000140 CR3:
0000000005979000 CR4:
00000000000006f0
[ 43.361162] Call Trace:
[ 43.361162] process_one_work+0x1b4/0x3e0
[ 43.361162] worker_thread+0x43/0x4d0
[ 43.361162] ? __schedule+0x17f/0x4e0
[ 43.361162] kthread+0xf7/0x130
[ 43.361162] ? process_one_work+0x3e0/0x3e0
[ 43.361162] ? kthread_create_on_node+0x40/0x40
[ 43.361162] ret_from_fork+0x29/0x40
[ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff
48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b
73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b
Keep references on the PHY driver module right before we are going to
utilize it in phy_attach_direct(), and conversely when we don't use it
anymore in phy_detach().
Signed-off-by: Mao Wenan <maowenan@huawei.com>
[florian: rebase, rework commit message]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanislaw Gruszka [Wed, 24 May 2017 01:53:59 +0000 (21:53 -0400)]
ethtool: do not vzalloc(0) on registers dump
[ Upstream commit
3808d34838184fd29088d6b3a364ba2f1c018fb6 ]
If ->get_regs_len() callback return 0, we allocate 0 bytes of memory,
what print ugly warning in dmesg, which can be found further below.
This happen on mac80211 devices where ieee80211_get_regs_len() just
return 0 and driver only fills ethtool_regs structure and actually
do not provide any dump. However I assume this can happen on other
drivers i.e. when for some devices driver provide regs dump and for
others do not. Hence preventing to to print warning in ethtool code
seems to be reasonable.
ethtool: vmalloc: allocation failure: 0 bytes, mode:0x24080c2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_ZERO)
<snip>
Call Trace:
[<
ffffffff813bde47>] dump_stack+0x63/0x8c
[<
ffffffff811b0a1f>] warn_alloc+0x13f/0x170
[<
ffffffff811f0476>] __vmalloc_node_range+0x1e6/0x2c0
[<
ffffffff811f0874>] vzalloc+0x54/0x60
[<
ffffffff8169986c>] dev_ethtool+0xb4c/0x1b30
[<
ffffffff816adbb1>] dev_ioctl+0x181/0x520
[<
ffffffff816714d2>] sock_do_ioctl+0x42/0x50
<snip>
Mem-Info:
active_anon:435809 inactive_anon:173951 isolated_anon:0
active_file:835822 inactive_file:196932 isolated_file:0
unevictable:0 dirty:8 writeback:0 unstable:0
slab_reclaimable:157732 slab_unreclaimable:10022
mapped:83042 shmem:306356 pagetables:9507 bounce:0
free:130041 free_pcp:1080 free_cma:0
Node 0 active_anon:1743236kB inactive_anon:695804kB active_file:3343288kB inactive_file:787728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:332168kB dirty:32kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 1225424kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no
Node 0 DMA free:15900kB min:136kB low:168kB high:200kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 3187 7643 7643
Node 0 DMA32 free:419732kB min:28124kB low:35152kB high:42180kB active_anon:541180kB inactive_anon:248988kB active_file:1466388kB inactive_file:389632kB unevictable:0kB writepending:0kB present:3370280kB managed:3290932kB mlocked:0kB slab_reclaimable:217184kB slab_unreclaimable:4180kB kernel_stack:160kB pagetables:984kB bounce:0kB free_pcp:2236kB local_pcp:660kB free_cma:0kB
lowmem_reserve[]: 0 0 4456 4456
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Thu, 2 Feb 2017 18:05:26 +0000 (18:05 +0000)]
log2: make order_base_2() behave correctly on const input value zero
commit
29905b52fad0854351f57bab867647e4982285bf upstream.
The function order_base_2() is defined (according to the comment block)
as returning zero on input zero, but subsequently passes the input into
roundup_pow_of_two(), which is explicitly undefined for input zero.
This has gone unnoticed until now, but optimization passes in GCC 7 may
produce constant folded function instances where a constant value of
zero is passed into order_base_2(), resulting in link errors against the
deliberately undefined '____ilog2_NaN'.
So update order_base_2() to adhere to its own documented interface.
[ See
http://marc.info/?l=linux-kernel&m=
147672952517795&w=2
and follow-up discussion for more background. The gcc "optimization
pass" is really just broken, but now the GCC trunk problem seems to
have escaped out of just specially built daily images, so we need to
work around it in mainline. - Linus ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 24 May 2017 01:53:57 +0000 (21:53 -0400)]
kasan: respect /proc/sys/kernel/traceoff_on_warning
[ Upstream commit
4f40c6e5627ea73b4e7c615c59631f38cc880885 ]
After much waiting I finally reproduced a KASAN issue, only to find my
trace-buffer empty of useful information because it got spooled out :/
Make kasan_report honour the /proc/sys/kernel/traceoff_on_warning
interface.
Link: http://lkml.kernel.org/r/20170125164106.3514-1-aryabinin@virtuozzo.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kirill A. Shutemov [Wed, 24 May 2017 01:53:56 +0000 (21:53 -0400)]
shmem: fix sleeping from atomic context
[ Upstream commit
253fd0f02040a19c6fe80e4171659fa3482a422d ]
Syzkaller fuzzer managed to trigger this:
BUG: sleeping function called from invalid context at mm/shmem.c:852
in_atomic(): 1, irqs_disabled(): 0, pid: 529, name: khugepaged
3 locks held by khugepaged/529:
#0: (shrinker_rwsem){++++..}, at: [<
ffffffff818d7ef1>] shrink_slab.part.59+0x121/0xd30 mm/vmscan.c:451
#1: (&type->s_umount_key#29){++++..}, at: [<
ffffffff81a63630>] trylock_super+0x20/0x100 fs/super.c:392
#2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<
ffffffff818fd83e>] spin_lock include/linux/spinlock.h:302 [inline]
#2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<
ffffffff818fd83e>] shmem_unused_huge_shrink+0x28e/0x1490 mm/shmem.c:427
CPU: 2 PID: 529 Comm: khugepaged Not tainted 4.10.0-rc5+ #201
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
shmem_undo_range+0xb20/0x2710 mm/shmem.c:852
shmem_truncate_range+0x27/0xa0 mm/shmem.c:939
shmem_evict_inode+0x35f/0xca0 mm/shmem.c:1030
evict+0x46e/0x980 fs/inode.c:553
iput_final fs/inode.c:1515 [inline]
iput+0x589/0xb20 fs/inode.c:1542
shmem_unused_huge_shrink+0xbad/0x1490 mm/shmem.c:446
shmem_unused_huge_scan+0x10c/0x170 mm/shmem.c:512
super_cache_scan+0x376/0x450 fs/super.c:106
do_shrink_slab mm/vmscan.c:378 [inline]
shrink_slab.part.59+0x543/0xd30 mm/vmscan.c:481
shrink_slab mm/vmscan.c:2592 [inline]
shrink_node+0x2c7/0x870 mm/vmscan.c:2592
shrink_zones mm/vmscan.c:2734 [inline]
do_try_to_free_pages+0x369/0xc80 mm/vmscan.c:2776
try_to_free_pages+0x3c6/0x900 mm/vmscan.c:2982
__perform_reclaim mm/page_alloc.c:3301 [inline]
__alloc_pages_direct_reclaim mm/page_alloc.c:3322 [inline]
__alloc_pages_slowpath+0xa24/0x1c30 mm/page_alloc.c:3683
__alloc_pages_nodemask+0x544/0xae0 mm/page_alloc.c:3848
__alloc_pages include/linux/gfp.h:426 [inline]
__alloc_pages_node include/linux/gfp.h:439 [inline]
khugepaged_alloc_page+0xc2/0x1b0 mm/khugepaged.c:750
collapse_huge_page+0x182/0x1fe0 mm/khugepaged.c:955
khugepaged_scan_pmd+0xfdf/0x12a0 mm/khugepaged.c:1208
khugepaged_scan_mm_slot mm/khugepaged.c:1727 [inline]
khugepaged_do_scan mm/khugepaged.c:1808 [inline]
khugepaged+0xe9b/0x1590 mm/khugepaged.c:1853
kthread+0x326/0x3f0 kernel/kthread.c:227
ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
The iput() from atomic context was a bad idea: if after igrab() somebody
else calls iput() and we left with the last inode reference, our iput()
would lead to inode eviction and therefore sleeping.
This patch should fix the situation.
Link: http://lkml.kernel.org/r/20170131093141.GA15899@node.shutemov.name
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Lin [Wed, 24 May 2017 01:53:55 +0000 (21:53 -0400)]
jump label: pass kbuild_cflags when checking for asm goto support
[ Upstream commit
35f860f9ba6aac56cc38e8b18916d833a83f1157 ]
Some versions of ARM GCC compiler such as Android toolchain throws in a
'-fpic' flag by default. This causes the gcc-goto check script to fail
although some config would have '-fno-pic' flag in the KBUILD_CFLAGS.
This patch passes the KBUILD_CFLAGS to the check script so that the
script does not rely on the default config from different compilers.
Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.com
Signed-off-by: David Lin <dtwlin@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Wed, 24 May 2017 01:53:54 +0000 (21:53 -0400)]
PM / runtime: Avoid false-positive warnings from might_sleep_if()
[ Upstream commit
a9306a63631493afc75893a4ac405d4e1cbae6aa ]
The might_sleep_if() assertions in __pm_runtime_idle(),
__pm_runtime_suspend() and __pm_runtime_resume() may generate
false-positive warnings in some situations. For example, that
happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair
is executed with disabled interrupts within an outer
pm_runtime_get_sync()/pm_runtime_put() section for the same device.
[Generally, pm_runtime_get_sync() may sleep, so it should not be
called with disabled interrupts, but in this particular case the
previous pm_runtime_get_sync() guarantees that the device will not
be suspended, so the inner pm_runtime_get_sync() will return
immediately after incrementing the device's usage counter.]
That started to happen in the i915 driver in 4.10-rc, leading to
the following splat:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032
in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg
1 lock held by Xorg/1500:
#0: (&dev->struct_mutex){+.+.+.}, at:
[<
ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915]
CPU: 0 PID: 1500 Comm: Xorg Not tainted
Call Trace:
dump_stack+0x85/0xc2
___might_sleep+0x196/0x260
__might_sleep+0x53/0xb0
__pm_runtime_resume+0x7a/0x90
intel_runtime_pm_get+0x25/0x90 [i915]
aliasing_gtt_bind_vma+0xaa/0xf0 [i915]
i915_vma_bind+0xaf/0x1e0 [i915]
i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915]
i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915]
? trace_hardirqs_on+0xd/0x10
? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915]
? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915]
i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915]
? __might_fault+0x4e/0xb0
i915_gem_execbuffer2+0xc5/0x260 [i915]
? __might_fault+0x4e/0xb0
drm_ioctl+0x206/0x450 [drm]
? i915_gem_execbuffer+0x340/0x340 [i915]
? __fget+0x5/0x200
do_vfs_ioctl+0x91/0x6f0
? __fget+0x111/0x200
? __fget+0x5/0x200
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc6
even though the code triggering it is correct.
Unfortunately, the might_sleep_if() assertions in question are
too coarse-grained to cover such cases correctly, so make them
a bit less sensitive in order to avoid the false-positives.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 24 May 2017 01:53:53 +0000 (21:53 -0400)]
ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
[ Upstream commit
5aff1d245e8cc1ab5c4517d916edaed9e3f7f973 ]
The symbols can no longer be used as loadable modules, leading to a harmless Kconfig
warning:
arch/arm/configs/imote2_defconfig:60:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/imote2_defconfig:59:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
arch/arm/configs/ezx_defconfig:68:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/ezx_defconfig:67:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
Let's make them built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Lüssing [Wed, 24 May 2017 01:53:52 +0000 (21:53 -0400)]
ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches
[ Upstream commit
a088d1d73a4bcfd7bc482f8d08375b9b665dc3e5 ]
When for instance a mobile Linux device roams from one access point to
another with both APs sharing the same broadcast domain and a
multicast snooping switch in between:
1) (c) <~~~> (AP1) <--[SSW]--> (AP2)
2) (AP1) <--[SSW]--> (AP2) <~~~> (c)
Then currently IPv6 multicast packets will get lost for (c) until an
MLD Querier sends its next query message. The packet loss occurs
because upon roaming the Linux host so far stayed silent regarding
MLD and the snooping switch will therefore be unaware of the
multicast topology change for a while.
This patch fixes this by always resending MLD reports when an interface
change happens, for instance from NO-CARRIER to CARRIER state.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Kardashevskiy [Wed, 24 May 2017 01:53:51 +0000 (21:53 -0400)]
vfio/spapr_tce: Set window when adding additional groups to container
[ Upstream commit
930a42ded3fede7ca3acafc9153f4f2d0f56a92c ]
If a container already has a group attached, attaching a new group
should just program already created IOMMU tables to the hardware via
the iommu_table_group_ops::set_window() callback.
However commit
6f01cc692a16 ("vfio/spapr: Add a helper to create
default DMA window") did not just simplify the code but also removed
the set_window() calls in the case of attaching groups to a container
which already has tables so it broke VFIO PCI hotplug.
This reverts set_window() bits in tce_iommu_take_ownership_ddw().
Fixes:
6f01cc692a16 ("vfio/spapr: Add a helper to create default DMA window")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcus Huewe [Wed, 24 May 2017 01:53:49 +0000 (21:53 -0400)]
ipv6: addrconf: fix generation of new temporary addresses
[ Upstream commit
a11a7f71cac209c7c9cca66eb506e1ebb033a3b3 ]
Under some circumstances it is possible that no new temporary addresses
will be generated.
For instance, addrconf_prefix_rcv_add_addr() indirectly calls
ipv6_create_tempaddr(), which creates a tentative temporary address and
starts dad. Next, addrconf_prefix_rcv_add_addr() indirectly calls
addrconf_verify_rtnl(). Now, assume that the previously created temporary
address has the least preferred lifetime among all existing addresses and
is still tentative (that is, dad is still running). Hence, the next run of
addrconf_verify_rtnl() is performed when the preferred lifetime of the
temporary address ends. If dad succeeds before the next run, the temporary
address becomes deprecated during the next run, but no new temporary
address is generated.
In order to fix this, schedule the next addrconf_verify_rtnl() run slightly
before the temporary address becomes deprecated, if dad succeeded.
Signed-off-by: Marcus Huewe <suse-tux@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thanneeru Srinivasulu [Wed, 24 May 2017 01:53:48 +0000 (21:53 -0400)]
net: thunderx: Fix PHY autoneg for SGMII QLM mode
[ Upstream commit
075ad765ef7541b2860de8408c165a92b78aefa3 ]
This patch fixes the case where there is no phydev attached
to a LMAC in DT due to non-existance of a PHY driver or due
to usage of non-stanadard PHY which doesn't support autoneg.
Changes dependeds on firmware to send correct info w.r.t
PHY and autoneg capability.
This patch also covers a case where a 10G/40G interface is used
as a 1G with convertors with Cortina PHY in between.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis R. Rodriguez [Wed, 24 May 2017 01:53:47 +0000 (21:53 -0400)]
kernel/ucount.c: mark user_header with kmemleak_ignore()
[ Upstream commit
ed5bd7dc88edf4a4a9c67130742b1b59aa017a5f ]
The user_header gets caught by kmemleak with the following splat as
missing a free:
unreferenced object 0xffff99667a733d80 (size 96):
comm "swapper/0", pid 1, jiffies
4294892317 (age 62191.468s)
hex dump (first 32 bytes):
a0 b6 92 b4 ff ff ff ff 00 00 00 00 01 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
kmemleak_alloc+0x4a/0xa0
__kmalloc+0x144/0x260
__register_sysctl_table+0x54/0x5e0
register_sysctl+0x1b/0x20
user_namespace_sysctl_init+0x17/0x34
do_one_initcall+0x52/0x1a0
kernel_init_freeable+0x173/0x200
kernel_init+0xe/0x100
ret_from_fork+0x2c/0x40
The BUG_ON()s are intended to crash so no need to clean up after
ourselves on error there. This is also a kernel/ subsys_init() we don't
need a respective exit call here as this is never modular, so just white
list it.
Link: http://lkml.kernel.org/r/20170203211404.31458-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Herrenschmidt [Wed, 24 May 2017 01:53:46 +0000 (21:53 -0400)]
powerpc/powernv: Properly set "host-ipi" on IPIs
[ Upstream commit
f83e6862047e1e371bdc5d512dd6cabe8a3965b8 ]
Otherwise KVM will fail to pass them through to the host
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Wed, 24 May 2017 01:53:45 +0000 (21:53 -0400)]
i2c: piix4: Fix request_region size
[ Upstream commit
f43128c75202f29ee71aa83e6c320a911137c189 ]
Since '
701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.
Fixes:
701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo Ribalda [Wed, 24 May 2017 01:53:44 +0000 (21:53 -0400)]
i2c: piix4: Request the SMBUS semaphore inside the mutex
[ Upstream commit
bbb27fc33d44e7b8d96369810654df4ee1837566 ]
SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid
multiple buses accessing to the semaphore at the same time.
Fixes:
701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Brüns [Wed, 24 May 2017 01:53:43 +0000 (21:53 -0400)]
sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications
[ Upstream commit
5a70348e1187c5bf1cbd0ec51843f36befed1c2d ]
If a context is configured as dualstack ("IPv4v6"), the modem indicates
the context activation with a slightly different indication message.
The dual-stack indication omits the link_type (IPv4/v6) and adds
additional address fields.
IPv6 LSIs are identical to IPv4 LSIs, but have a different link type.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Brüns [Wed, 24 May 2017 01:53:42 +0000 (21:53 -0400)]
sierra_net: Skip validating irrelevant fields for IDLE LSIs
[ Upstream commit
764895d3039e903dac3a70f219949efe43d036a0 ]
When the context is deactivated, the link_type is set to 0xff, which
triggers a warning message, and results in a wrong link status, as
the LSI is ignored.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kejian Yan [Wed, 24 May 2017 01:53:41 +0000 (21:53 -0400)]
net: hns: Fix the device being used for dma mapping during TX
[ Upstream commit
b85ea006b6bebb692628f11882af41c3e12e1e09 ]
This patch fixes the device being used to DMA map skb->data.
Erroneous device assignment causes the crash when SMMU is enabled.
This happens during TX since buffer gets DMA mapped with device
correspondign to net_device and gets unmapped using the device
related to DSAF.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ralf Baechle [Wed, 24 May 2017 01:53:40 +0000 (21:53 -0400)]
NET: mkiss: Fix panic
[ Upstream commit
7ba1b689038726d34e3244c1ac9e2e18c2ea4787 ]
If a USB-to-serial adapter is unplugged, the driver re-initializes, with
dev->hard_header_len and dev->addr_len set to zero, instead of the correct
values. If then a packet is sent through the half-dead interface, the
kernel will panic due to running out of headroom in the skb when pushing
for the AX.25 headers resulting in this panic:
[<
c0595468>] (skb_panic) from [<
c0401f70>] (skb_push+0x4c/0x50)
[<
c0401f70>] (skb_push) from [<
bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25])
[<
bf0bdad4>] (ax25_hard_header [ax25]) from [<
bf0d05d4>] (ax_header+0x38/0x40 [mkiss])
[<
bf0d05d4>] (ax_header [mkiss]) from [<
c041b584>] (neigh_compat_output+0x8c/0xd8)
[<
c041b584>] (neigh_compat_output) from [<
c043e7a8>] (ip_finish_output+0x2a0/0x914)
[<
c043e7a8>] (ip_finish_output) from [<
c043f948>] (ip_output+0xd8/0xf0)
[<
c043f948>] (ip_output) from [<
c043f04c>] (ip_local_out_sk+0x44/0x48)
This patch makes mkiss behave like the 6pack driver. 6pack does not
panic. In 6pack.c sp_setup() (same function name here) the values for
dev->hard_header_len and dev->addr_len are set to the same values as in
my mkiss patch.
[ralf@linux-mips.org: Massages original submission to conform to the usual
standards for patch submissions.]
Signed-off-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Fontenot [Wed, 24 May 2017 01:53:39 +0000 (21:53 -0400)]
ibmvnic: Initialize completion variables before starting work
[ Upstream commit
db5d0b597bc27bbddf40f2f8359a73be4eb77104 ]
Initialize condition variables prior to invoking any work that can
mark them complete. This resolves a race in the ibmvnic driver where
the driver faults trying to complete an uninitialized condition
variable.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>