drm/amd/display: update dcn315 lpddr pstate latency

[ Upstream commit c92da0403d373c03ea5c65c0260c7db6762013b0 ]

[WHY/HOW]
Increase the pstate latency to improve ac/dc transition

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Use common function for IP version check

[ Upstream commit 2f86bf79b63dbe6963ebc647b77a5f576a906b40 ]

KFD_GC_VERSION was recently updated to use a new function
for IP version checks. As a result, use KFD_GC_VERSION as
the common function for all IP version checks in KFD.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Do not issue gpu reset from nbio v7_9 bif interrupt

[ Upstream commit 884e9b0827e889a8742e203ccd052101fb0b945d ]

In nbio v7_9, host driver should not issu gpu reset

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: warn once for each partition in bio_check_ro()

[ Upstream commit 67d995e069535c32829f5d368d919063492cec6e ]

Commit 1b0a151c10a6 ("blk-core: use pr_warn_ratelimited() in
bio_check_ro()") fix message storm by limit the rate, however, there
will still be lots of message in the long term. Fix it better by warn
once for each partition.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231128123027.971610-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: use fget/fput consistently

[ Upstream commit 73363c262d6a7d26063da96610f61baf69a70f7c ]

Normally within a syscall it's fine to use fdget/fdput for grabbing a
file from the file table, and it's fine within io_uring as well. We do
that via io_uring_enter(2), io_uring_register(2), and then also for
cancel which is invoked from the latter. io_uring cannot close its own
file descriptors as that is explicitly rejected, and for the cancel
side of things, the file itself is just used as a lookup cookie.

However, it is more prudent to ensure that full references are always
grabbed. For anything threaded, either explicitly in the application
itself or through use of the io-wq worker threads, this is what happens
anyway. Generalize it and use fget/fput throughout.

Also see the below link for more details.

Link: https://lore.kernel.org/io-uring/CAG48ez1htVSO3TqmrF8QcX2WFuYTRM-VZ_N10i-VZgbtg=NNqw@mail.gmail.com/
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-core: fix a memory leak in nvme_ns_info_from_identify()

[ Upstream commit e3139cef8257fcab1725441e2fd5fd0ccb5481b1 ]

In case of error, free the nvme_id_ns structure that was allocated
by nvme_identify_ns().

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format

[ Upstream commit 7b4c93a50a2ebbbaf656cc4fa6aca74a6166d85b ]

When looking up DMIC blob from the NHLT table and the format is 32 bits,
ignore the vbps matching for 32 bps for DMIC since some NHLT table have
the vbps as 24, some have it as 32.
The DMIC hardware supports only one type of 32 bit sample size, which is
24 bit sampling on the MSB side and bits[1:0] is used for indicating the
channel number.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231127111658.17275-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

debugfs: fix automount d_fsdata usage

[ Upstream commit 0ed04a1847a10297595ac24dc7d46b35fb35f90a ]

debugfs_create_automount() stores a function pointer in d_fsdata,
but since commit 7c8d469877b1 ("debugfs: add support for more
elaborate ->d_fsdata") debugfs_release_dentry() will free it, now
conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not
set for the function pointer in automount. As a result, removing
an automount dentry would attempt to free the function pointer.
Luckily, the only user of this (tracing) never removes it.

Nevertheless, it's safer if we just handle the fsdata in one way,
namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus,
change the automount to allocate it, and use the real_fops in the
data to indicate whether or not automount is filled, rather than
adding a type tag. At least for now this isn't actually needed,
but the next changes will require it.

Also check in debugfs_file_get() that it gets only called
on regular files, just to make things clearer.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap

[ Upstream commit 00f7d153f3358a7c7e35aef66fcd9ceb95d90430 ]

The new 320 MHz channel width wasn't handled, so connecting
a station to a 320 MHz AP would limit the station to 20 MHz
(on HT) after a warning, handle 320 MHz to fix that.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231109182201.495381-1-greearb@candelatech.com
[write a proper commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: avoid offset calculation on NULL pointer

[ Upstream commit ef5828805842204dd0259ecfc132b5916c8a77ae ]

ieee80211_he_6ghz_oper() can be passed a NULL pointer
and checks for that, but already did the calculation
to inside of it before. Move it after the check.

Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20231122030237.31276-1-michael-cy.lee@mediatek.com
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: lock wiphy mutex for rfkill poll

[ Upstream commit 8e2f6f2366219b3304b227bdd2f04b64c92e3e12 ]

We want to guarantee the mutex is held for pretty much
all operations, so ensure that here as well.

Reported-by: syzbot+7e59a5bfc7a897247e18@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: fix uninit-value in mptcp_incoming_options

[ Upstream commit 237ff253f2d4f6307b7b20434d7cbcc67693298b ]

Added initialization use_ack to mptcp_parse_option().

Reported-by: syzbot+b834a6b2decad004cfa1@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro

[ Upstream commit 7c9caa299335df94ad1c58f70a22f16a540eab60 ]

This patch corrected the speaker and headset mic pin config to the more
appropriate values.

Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20231117170923.106822-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: lochnagar: Don't build on MIPS

[ Upstream commit 6588732445ff19f6183f0fa72ddedf67e5a5be32 ]

MIPS appears to define a RST symbol at a high level, which clashes
with some register naming in the driver. Since there is currently
no case for running this driver on MIPS devices simply cut off the
build of this driver on MIPS.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311071303.JJMAOjy4-lkp@intel.com/
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231115162853.1891940-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Reset suite counter right before running tests

[ Upstream commit 2e3c94aed51eabbe9c1c0ee515371ea5441c2fa7 ]

Today we reset the suite counter as part of the suite cleanup,
called from the module exit callback, but it might not work that
well as one can try to collect results without unloading a previous
test (either unintentionally or due to dependencies).

For easy reproduction try to load the kunit-test.ko and then
collect and parse results from the kunit-example-test.ko load.
Parser will complain about mismatch of expected test number:

[ ] KTAP version 1
[ ] 1..1
[ ]     # example: initializing suite
[ ]     KTAP version 1
[ ]     # Subtest: example
..
[ ] # example: pass:5 fail:0 skip:4 total:9
[ ] # Totals: pass:6 fail:0 skip:6 total:12
[ ] ok 7 example

[ ] [ERROR] Test: example: Expected test number 1 but found 7
[ ] ===================== [PASSED] example =====================
[ ] ============================================================
[ ] Testing complete. Ran 12 tests: passed: 6, skipped: 6, errors: 1

Since we are now printing suite test plan on every module load,
right before running suite tests, we should make sure that suite
counter will also start from 1. Easiest solution seems to be move
counter reset to the __kunit_test_suites_init() function.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Warn if tests are slow

[ Upstream commit f8f2847f739dc899d0e563eac01299dadefa64ff ]

Kunit recently gained support to setup attributes, the first one being
the speed of a given test, then allowing to filter out slow tests.

A slow test is defined in the documentation as taking more than one
second. There's an another speed attribute called "super slow" but whose
definition is less clear.

Add support to the test runner to check the test execution time, and
report tests that should be marked as slow but aren't.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: s32cc: Avoid possible string truncation

[ Upstream commit 08e8734d877a9a0fb8af1254a4ce58734fbef296 ]

With "W=1" and "-Wformat-truncation" build options, the kernel test robot
found a possible string truncation warning in pinctrl-s32cc.c, which uses
an 8-byte char array to hold a memory region name "map%u". Since the
maximum number of digits that a u32 value can present is 10, and the "map"
string occupies 3 bytes with a termination '\0', which means the rest 4
bytes cannot fully present the integer "X" that exceeds 4 digits.

Here we check if the number >= 10000, which is the lowest value that
contains more than 4 digits.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311030159.iyUGjNGF-lkp@intel.com/
Signed-off-by: Chester Lin <clin@suse.com>
Link: https://lore.kernel.org/r/20231107141044.24058-1-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: explicitly null-terminate the xattr list

commit e26b6d39270f5eab0087453d9b544189a38c8564 upstream.

When setting an xattr, explicitly null-terminate the xattr list.  This
eliminates the fragile assumption that the unused xattr space is always
zeroed.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.6.12

Link: https://lore.kernel.org/r/20240113094204.275569789@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: drop the nfsd_put helper

commit 64e6304169f1e1f078e7f0798033f80a7fb0ea46 upstream.

It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.

Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.

Fixes: 2a501f55cd64 ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.6.11

Link: https://lore.kernel.org/r/20240108150602.976232871@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Comment CSID dt_id field

commit f910d3ba78a2677c23508f225eb047d89eb4b2b6 upstream.

Digging into the documentation we find that the DT_ID bitfield is used to
map the six bit DT to a two bit ID code. This value is concatenated to the
VC bitfield to create a CID value. DT_ID is the two least significant bits
of CID and VC the most significant bits.

Originally we set dt_id = vc * 4 in and then subsequently set dt_id = vc.

commit 3c4ed72a16bc ("media: camss: sm8250: Virtual channels for CSID")
silently fixed the multiplication by four which would give a better
value for the generated CID without mentioning what was being done or why.

Next up I haplessly changed the value back to "dt_id = vc * 4" since there
didn't appear to be any logic behind it.

Hans asked what the change was for and I honestly couldn't remember the
provenance of it, so I dug in.

Link: https://lore.kernel.org/linux-arm-msm/edd4bf9b-0e1b-883c-1a4d-50f4102c3924@xs4all.nl/
Add a comment so the next hapless programmer doesn't make this same
mistake.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/memdev: Hold region_rwsem during inject and clear poison ops

commit 0e33ac9c3ffe5e4f55c68345f44cea7fec2fe750 upstream.

Poison inject and clear are supported via debugfs where a privileged
user can inject and clear poison to a device physical address.

Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")
added a lockdep assert that highlighted a gap in poison inject and
clear functions where holding the dpa_rwsem does not assure that a
a DPA is not added to a region.

The impact for inject and clear is that if the DPA address being
injected or cleared has been attached to a region, but not yet
committed, the dev_dbg() message intended to alert the debug user
that they are acting on a mapped address is not emitted. Also, the
cxl_poison trace event that serves as a log of the inject and clear
activity will not include region info.

Close this gap by snapshotting an unchangeable region state during
poison inject and clear operations. That means holding both the
region_rwsem and the dpa_rwsem during the inject and clear ops.

Fixes: d2fbc4865802 ("cxl/memdev: Add support for the Inject Poison mailbox command")
Fixes: 9690b07748d1 ("cxl/memdev: Add support for the Clear Poison mailbox command")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/08721dc1df0a51e4e38fecd02425c3475912dfd5.1701041440.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/hdm: Fix a benign lockdep splat

commit 36a1c2ee50f573972aea3c3019555f47ee0094c0 upstream.

The new helper "cxl_num_decoders_committed()" added a lockdep assertion
to validate that port->commit_end is protected against modification.
That assertion fires in init_hdm_decoder() where it is initializing
port->commit_end. Given that it is both accessing and writing that
property it obstensibly needs the lock.

In practice, CXL decoder commit rules (must commit in order) and the
in-order discovery of device decoders makes the manipulation of
->commit_end in init_hdm_decoder() safe. However, rather than rely on
the subtle rules of CXL hardware, just make the implementation obviously
correct from a software perspective.

The Fixes: tag is only for cleaning up a lockdep splat, there is no
functional issue addressed by this fix.

Fixes: 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170025232811.2147250.16376901801315194121.stgit@djiang5-mobl3
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Add cxl_num_decoders_committed() usage to cxl_test

commit e05501e8a84eee4f819f31b9ce663bddd01b3b69 upstream.

Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") missed the
conversion for cxl_test. Add usage of cxl_num_decoders_committed() to
replace the open coding.

Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/169929160525.824083.11813222229025394254.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Fix eMMC init failure after hw reset

commit 8abf77c88929b6d20fa4f9928b18d6448d64e293 upstream.

Some eMMC devices that do not close the auto clk gate after hw reset will
cause eMMC initialization to fail. Let's fix this.

Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K")
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Cancel delayed work before releasing host

commit 1036f69e251380573e256568cf814506e3fb9988 upstream.

On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe
deferral of the vqmmc-supply regulator:

    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8
    Modules linked in:
    CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101
    Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
    epc : __run_timers.part.0+0x1d0/0x1e8
     ra : __run_timers.part.0+0x134/0x1e8
    epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60
     gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000
     t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20
     s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000
     a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60
     a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68
     s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000
     s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0
     s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000
     s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52
     t5 : ffffffd8024ae018 t6 : ffffffd8024ae038
    status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
    [<ffffffff800771a4>] __run_timers.part.0+0x1d0/0x1e8
    [<ffffffff800771e0>] run_timer_softirq+0x24/0x4a
    [<ffffffff80809092>] __do_softirq+0xc6/0x1fa
    [<ffffffff80028e4c>] irq_exit_rcu+0x66/0x84
    [<ffffffff80800f7a>] handle_riscv_irq+0x40/0x4e
    [<ffffffff80808f48>] call_on_irq_stack+0x1c/0x28
    ---[ end trace 0000000000000000 ]---

What happens?

    renesas_sdhi_probe()
    {
     tmio_mmc_host_alloc()
    mmc_alloc_host()
INIT_DELAYED_WORK(&host->detect, mmc_rescan);

devm_request_irq(tmio_mmc_irq);

/*
 * After this, the interrupt handler may be invoked at any time
 *
 *  tmio_mmc_irq()
 *  {
 * __tmio_mmc_card_detect_irq()
 *     mmc_detect_change()
 * _mmc_detect_change()
 *     mmc_schedule_delayed_work(&host->detect, delay);
 *  }
 */

tmio_mmc_host_probe()
    tmio_mmc_init_ocr()
-EPROBE_DEFER

tmio_mmc_host_free()
    mmc_free_host()
    }

When expire_timers() runs later, it warns because the MMC host structure
containing the delayed work was freed, and now contains an invalid work
function pointer.

Fix this by cancelling any pending delayed work before releasing the
MMC host structure.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/205dc4c91b47e31b64392fe2498c7a449e717b4b.1701689330.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: rpmb: fixes pause retune on all RPMB partitions.

commit e7794c14fd73e5eb4a3e0ecaa5334d5a17377c50 upstream.

When RPMB was converted to a character device, it added support for
multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to
a character device").

One of the changes in this commit was transforming the variable target_part
defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed
the validation check done in mmc_blk_part_switch_pre() and
mmc_blk_part_switch_post(), so let's fix it.

Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device")
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-mx-sdhc: Fix initialization frozen issue

commit 8c124d998ea0c9022e247b11ac51f86ec8afa0e1 upstream.

Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending
HS CMD13") set HS clock (52MHz) before switching to HS mode. For this
freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9).
Then we set rx_clk_phase to 11 or 15 which is out of range and make
hardware frozen. After we send command request, no irq will be
interrupted and the mmc driver will keep to wait for request finished,
even durning rebooting.

So let's set it to Phase 90 which should work in most cases. Then let
meson_mx_sdhc_execute_tuning() to find the accurate value for data
transfer.

If this doesn't work, maybe need to define a factor in dts.

Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/TYZPR01MB5556A3E71554A2EC08597EA4C9CDA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR

commit 202260f64519e591b5cd99626e441b6559f571a3 upstream.

The check for sending the vsc infopacket to the display was gated behind
PSR (Panel Self Refresh) being enabled.

The vsc infopacket also contains the colorimetry (specifically the
container color gamut) information for the stream on modern DP.

PSR is typically only supported on mobile phone eDP displays, thus this
was not getting sent for typical desktop monitors or TV screens.

This functionality is needed for proper HDR10 functionality on DP as it
wants BT2020 RGB/YCbCr for the container color space.

Cc: stable@vger.kernel.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Fixes: 15f9dfd545a1 ("drm/amd/display: Register Colorspace property for DP and HDMI")
Tested-by: Simon Berz <simon@berz.me>
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: add nv12 bounding box

commit 7e725c20fea8914ef1829da777f517ce1a93d388 upstream.

This was included in gpu_info firmware, move it into the
driver for consistency with other nv1x parts.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: skip gpu_info fw loading on navi12

commit 21f6137c64c65d6808c4a81006956197ca203383 upstream.

It's no longer required.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix unmap_mapping_range high bits shift bug

commit 9eab0421fa94a3dde0d1f7e36ab3294fc306c99d upstream.

The bug happens when highest bit of holebegin is 1, suppose holebegin is
0x8000000111111000, after shift, hba would be 0xfff8000000111111, then
vma_interval_tree_foreach would look it up fail or leads to the wrong
result.

error call seq e.g.:
- mmap(..., offset=0x8000000111111000)
  |- syscall(mmap, ... unsigned long, off):
     |- ksys_mmap_pgoff( ... , off >> PAGE_SHIFT);

  here pgoff is correctly shifted to 0x8000000111111,
  but pass 0x8000000111111000 as holebegin to unmap
  would then cause terrible result, as shown below:

- unmap_mapping_range(..., loff_t const holebegin)
  |- pgoff_t hba = holebegin >> PAGE_SHIFT;
          /* hba = 0xfff8000000111111 unexpectedly */

The issue happens in Heterogeneous computing, where the device(e.g.
gpu) and host share the same virtual address space.

A simple workflow pattern which hit the issue is:
        /* host */
    1. userspace first mmap a file backed VA range with specified offset.
                        e.g. (offset=0x800..., mmap return: va_a)
    2. write some data to the corresponding sys page
                         e.g. (va_a = 0xAABB)
        /* device */
    3. gpu workload touches VA, triggers gpu fault and notify the host.
        /* host */
    4. reviced gpu fault notification, then it will:
            4.1 unmap host pages and also takes care of cpu tlb
                  (use unmap_mapping_range with offset=0x800...)
            4.2 migrate sys page to device
            4.3 setup device page table and resolve device fault.
        /* device */
    5. gpu workload continued, it accessed va_a and got 0xAABB.
    6. gpu workload continued, it wrote 0xBBCC to va_a.
        /* host */
    7. userspace access va_a, as expected, it will:
            7.1 trigger cpu vm fault.
            7.2 driver handling fault to migrate gpu local page to host.
    8. userspace then could correctly get 0xBBCC from va_a
    9. done

But in step 4.1, if we hit the bug this patch mentioned, then userspace
would never trigger cpu fault, and still get the old value: 0xAABB.

Making holebegin unsigned first fixes the bug.

Link: https://lkml.kernel.org/r/20231220052839.26970-1-jiajun.xie.sh@gmail.com
Signed-off-by: Jiajun Xie <jiajun.xie.sh@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: core: Fix atomic xfer check for non-preempt config

commit a3368e1186e3ce8e38f78cbca019622095b1f331 upstream.

Since commit aa49c90894d0 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.

During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:

[   12.687169] No atomic I2C transfer handler for 'i2c-0'
[   12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...

Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.

Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea
Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org
Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/
Fixes: aa49c90894d0 ("i2c: core: Run atomic i2c xfer when !preemptible")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Tor Vic <torvic9@mailbox.org>
[wsa: removed a comment which needs more work, code is ok]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect

commit f5d03da48d062966c94f0199d20be0b3a37a7982 upstream.

kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate
indirect calls. However, int3_emulate_call always assumes the size of
the call to be 5 bytes when calculating the return address. This is
incorrect for register-based indirect calls in x86, which can be either
2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime,
the incorrect return address causes control flow to land onto the wrong
place after return -- possibly not a valid instruction boundary. This
can lead to a panic like the following:

[    7.308204][    C1] BUG: unable to handle page fault for address: 000000000002b4d8
[    7.308883][    C1] #PF: supervisor read access in kernel mode
[    7.309168][    C1] #PF: error_code(0x0000) - not-present page
[    7.309461][    C1] PGD 0 P4D 0
[    7.309652][    C1] Oops: 0000 [#1] SMP
[    7.309929][    C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6
[    7.310397][    C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[    7.311068][    C1] RIP: 0010:__common_interrupt+0x52/0xc0
[    7.311349][    C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[    7.312512][    C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[    7.312899][    C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[    7.313334][    C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[    7.313702][    C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[    7.314146][    C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[    7.314509][    C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[    7.314951][    C1] FS:  0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[    7.315396][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.315691][    C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[    7.316153][    C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    7.316508][    C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    7.316948][    C1] Call Trace:
[    7.317123][    C1]  <IRQ>
[    7.317279][    C1]  ? __die_body+0x64/0xb0
[    7.317482][    C1]  ? page_fault_oops+0x248/0x370
[    7.317712][    C1]  ? __wake_up+0x96/0xb0
[    7.317964][    C1]  ? exc_page_fault+0x62/0x130
[    7.318211][    C1]  ? asm_exc_page_fault+0x22/0x30
[    7.318444][    C1]  ? __cfi_native_send_call_func_single_ipi+0x10/0x10
[    7.318860][    C1]  ? default_idle+0xb/0x10
[    7.319063][    C1]  ? __common_interrupt+0x52/0xc0
[    7.319330][    C1]  common_interrupt+0x78/0x90
[    7.319546][    C1]  </IRQ>
[    7.319679][    C1]  <TASK>
[    7.319854][    C1]  asm_common_interrupt+0x22/0x40
[    7.320082][    C1] RIP: 0010:default_idle+0xb/0x10
[    7.320309][    C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9
[    7.321449][    C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256
[    7.321808][    C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c
[    7.322227][    C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c
[    7.322656][    C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2
[    7.323083][    C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000
[    7.323530][    C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000
[    7.323948][    C1]  ? __cfi_lapic_next_deadline+0x10/0x10
[    7.324239][    C1]  default_idle_call+0x31/0x50
[    7.324464][    C1]  do_idle+0xd3/0x240
[    7.324690][    C1]  cpu_startup_entry+0x25/0x30
[    7.324983][    C1]  start_secondary+0xb4/0xc0
[    7.325217][    C1]  secondary_startup_64_no_verify+0x179/0x17b
[    7.325498][    C1]  </TASK>
[    7.325641][    C1] Modules linked in:
[    7.325906][    C1] CR2: 000000000002b4d8
[    7.326104][    C1] ---[ end trace 0000000000000000 ]---
[    7.326354][    C1] RIP: 0010:__common_interrupt+0x52/0xc0
[    7.326614][    C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[    7.327570][    C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[    7.327910][    C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[    7.328273][    C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[    7.328632][    C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[    7.329223][    C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[    7.329780][    C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[    7.330193][    C1] FS:  0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[    7.330632][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.331050][    C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[    7.331454][    C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    7.331854][    C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    7.332236][    C1] Kernel panic - not syncing: Fatal exception in interrupt
[    7.332730][    C1] Kernel Offset: disabled
[    7.333044][    C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

The relevant assembly code is (from objdump, faulting address
highlighted):

ffffffff8102ed9d:       41 ff d3                  call   *%r11
ffffffff8102eda0:       65 48 <8b> 05 30 c7 ff    mov    %gs:0x7effc730(%rip),%rax

The emulation incorrectly sets the return address to be ffffffff8102ed9d
+ 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next
mov. This in turn causes incorrect subsequent instruction decoding and
eventually triggers the page fault above.

Instead of invoking int3_emulate_call, perform push and jmp emulation
directly in kprobe_emulate_call_indirect. At this point we can obtain
the instruction size from p->ainsn.size so that we can calculate the
correct return address.

Link: https://lore.kernel.org/all/20240102233345.385475-1-jinghao7@illinois.edu/
Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Cc: stable@vger.kernel.org
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards

commit ac9184fbb8478dab4a0724b279f94956b69be827 upstream.

VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When
the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge,
it appears that accesses to its 'Isochronous Cycle Timer' register (offset
0xf0 on PCI memory space) often causes unexpected system reboot in any
type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not
appears in the other type of machine (AMD pre-Ryzen machine, Intel
machine, at least), or in the other OHCI 1394 hardware (e.g. Texas
Instruments).

The issue explicitly appears at a commit dcadfd7f7c74 ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel.
It changed 1394 OHCI driver to access to the register every time to
dispatch local asynchronous transaction. However, the issue exists in
older version of kernel as long as it runs in AMD Ryzen machine, since
the access to the register is required to maintain bus time. It is not
hard to imagine that users experience the unexpected system reboot when
generating bus reset by plugging any devices in, or reading the register
by time-aware application programs; e.g. audio sample processing.

This commit suppresses the unexpected system reboot in the combination of
hardware. It avoids the access itself. As a result, the software stack can
not provide the hardware time anymore to unit drivers, userspace
applications, and nodes in the same IEEE 1394 bus. It brings apparent
disadvantage since time-aware application programs require it, while
time-unaware applications are available again; e.g. sbp2.

Cc: stable@vger.kernel.org
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1215436
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217994
Reported-by: Tobias Gruetzmacher <tobias-lists@23.gs>
Closes: https://sourceforge.net/p/linux1394/mailman/message/58711901/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2240973
Closes: https://bugs.launchpad.net/linux/+bug/2043905
Link: https://lore.kernel.org/r/20240102110150.244475-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mglru: skip special VMAs in lru_gen_look_around()

commit c28ac3c7eb945fee6e20f47d576af68fdff1392a upstream.

Special VMAs like VM_PFNMAP can contain anon pages from COW.  There isn't
much profit in doing lookaround on them.  Besides, they can trigger the
pte_special() warning in get_pte_pfn().

Skip them in lru_gen_look_around().

Link: https://lkml.kernel.org/r/20231223045647.1566043-1-yuzhao@google.com
Fixes: 018ee47f1489 ("mm: multi-gen LRU: exploit locality in rmap")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: syzbot+03fd9b3f71641f0ebf2d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/000000000000f9ff00060d14c256@google.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: constify sk_dst_get() and __sk_dst_get() argument

[ Upstream commit 5033f58d5feed1040eebeadb0c5efc95b8bf5720 ]

Both helpers only read fields from their socket argument.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: libwx: fix memory leak on free page

[ Upstream commit 738b54b9b6236f573eed2453c4cbfa77326793e2 ]

ifconfig ethx up, will set page->refcount larger than 1,
and then ifconfig ethx down, calling __page_frag_cache_drain()
to free pages, it is not compatible with page pool.
So deleting codes which changing page->refcount.

Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Signed-off-by: duanqiangwen <duanqiangwen@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/pmu: Ensure put_device on pmu devices

[ Upstream commit ef3d5cf9c59cccb012aa6b93d99f4c6eb5d6648e ]

The following kmemleaks were detected when removing the cxl module
stack:

unreferenced object 0xffff88822616b800 (size 1024):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882260abcc0 (size 16):
...
  hex dump (first 16 bytes):
    70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff  pmu_mem0.0.&....
  backtrace:
...
    [<00000000152b5e98>] dev_set_name+0x43/0x50
    [<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882272af200 (size 256):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000a14d1813>] device_add+0x4ea/0x890
    [<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...

devm_cxl_pmu_add() correctly registers a device remove function but it
only calls device_del() which is only part of device unregistration.

Properly call device_unregister() to free up the memory associated with
the device.

Fixes: 1ad3f701c399 ("cxl/pci: Find and register CXL PMU devices")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: prevent mss overflow in skb_segment()

[ Upstream commit 23d05d563b7e7b0314e65c8e882bc27eac2da8e7 ]

Once again syzbot is able to crash the kernel in skb_segment() [1]

GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :

mss = mss * partial_segs;

65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.

Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.

[1]

general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/vas: Migration suspend waits for no in-progress open windows

[ Upstream commit 0cf72f7f14d12cb065c3d01954cf42fc5638aa69 ]

The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.

t1: Allocate and open VAS t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
  unlock vas_pseries_mutex
  return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
  // No DLPAR CPU or migration
  add window to the list
  // Window will be added to the
  // list after the setup is completed
  unlock vas_pseries_mutex
  return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY

This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
  struct
- This counter tracks the number of open windows are still in
  progress
- The allocate setup window thread closes windows if the migration
  is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.

The code flow with the fix is as follows:

t1: Allocate and open VAS       t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
   unlock vas_pseries_mutex
   return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
    unlock vas_pseries_mutex
lock vas_pseries_mutex     sleep
if nr_closed_windows == 0     // Wait if any open window in
or migration is not started     // progress. The open window
   // No DLPAR CPU or migration     // thread closes the window without
   add window to the list     // adding to the list and return if
   nr_open_wins_progress--     // the migration is in progress.
   unlock vas_pseries_mutex
   return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY     lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return

Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISCV: KVM: update external interrupt atomically for IMSIC swfile

[ Upstream commit 4ad9843e1ea088bd2529290234c6c4c6374836a7 ]

The emulated IMSIC update the external interrupt pending depending on
the value of eidelivery and topei. It might lose an interrupt when it
is interrupted before setting the new value to the pending status.

For example, when VCPU0 sends an IPI to VCPU1 via IMSIC:

VCPU0                           VCPU1

                                CSRSWAP topei = 0
                                The VCPU1 has claimed all the external
                                interrupt in its interrupt handler.

                                topei of VCPU1's IMSIC = 0

set pending in VCPU1's IMSIC

topei of VCPU1' IMSIC = 1

set the external interrupt
pending of VCPU1

                                clear the external interrupt pending
                                of VCPU1

When the VCPU1 switches back to VS mode, it exits the interrupt handler
because the result of CSRSWAP topei is 0. If there are no other external
interrupts injected into the VCPU1's IMSIC, VCPU1 will never know this
pending interrupt unless it initiative read the topei.

If the interruption occurs between updating interrupt pending in IMSIC
and updating external interrupt pending of VCPU, it will not cause a
problem. Suppose that the VCPU1 clears the IPI pending in IMSIC right
after VCPU0 sets the pending, the external interrupt pending of VCPU1
will not be set because the topei is 0. But when the VCPU1 goes back to
VS mode, the pending IPI will be reported by the CSRSWAP topei, it will
not lose this interrupt.

So we only need to make the external interrupt updating procedure as a
critical section to avoid the problem.

Fixes: db8b7e97d613 ("RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC")
Tested-by: Roy Lin <roy.lin@sifive.com>
Tested-by: Wayling Chen <wayling.chen@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()

[ Upstream commit bffa7218dcddb80e7f18dfa545dd4b359b11dd93 ]

device_link_add() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231129090000.841440-1-yangyingliang@huaweicloud.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Protect int_handle field in hw descriptor

[ Upstream commit 778dfacc903d4b1ef5b7a9726e3a36bc15913d29 ]

The int_handle field in hw descriptor should also be protected
by wmb() before possibly triggering a DMA read.

Fixes: eb0cf33a91b4 (dmaengine: idxd: move interrupt handle assignment)
Signed-off-by: Guanjun <guanjun@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20231211053704.2725417-2-guanjun@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml

[ Upstream commit 5b750b22530fe53bf7fd6a30baacd53ada26911b ]

Does the same thing as:
commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2")

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/
Fixes: 67e38874b85b ("drm/amd/display: Increase num voltage states to 40")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Samson Tam <samson.tam@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/resource: Increment by align value in get_free_mem_region()

[ Upstream commit 659aa050a53817157b7459529538598a6449c1d3 ]

Currently get_free_mem_region() searches for available capacity
in increments equal to the region size being requested. This can
cause the search to take giant steps through the resource leaving
needless gaps and missing available space.

Specifically 'cxl create-region' fails with ERANGE even though capacity
of the given size and CXL's expected 256M x InterleaveWays alignment can
be satisfied.

Replace the total-request-size increment with a next alignment increment
so that the next possible address is always examined for availability.

Fixes: 14b80582c43e ("resource: Introduce alloc_free_mem_region()")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231113221324.1118092-1-alison.schofield@intel.com
Cc: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/core: Always hold region_rwsem while reading poison lists

[ Upstream commit 5558b92e8d39e18aa19619be2ee37274e9592528 ]

A read of a device poison list is triggered via a sysfs attribute
and the results are logged as kernel trace events of type cxl_poison.
The work is managed by either: a) the region driver when one of more
regions map the device, or by b) the memdev driver when no regions
map the device.

In the case of a) the region driver holds the region_rwsem while
reading the poison by committed endpoint decoder mappings and for
any unmapped resources. This makes sure that the cxl_poison trace
event trace reports valid region info. (Region name, HPA, and UUID).

In the case of b) the memdev driver holds the dpa_rwsem preventing
new DPA resources from being attached to a region. However, it leaves
a gap between region attach and decoder commit actions. If a DPA in
the gap is in the poison list, the cxl_poison trace event will omit
the region info.

Close the gap by holding the region_rwsem and the dpa_rwsem when
reading poison per memdev. Since both methods now hold both locks,
down_read both from the caller. Doing so also addresses the lockdep
assert that found this issue:
Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")

Fixes: f0832a586396 ("cxl/region: Provide region info to the cxl_poison trace event")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/08e8e7ec9a3413b91d51de39e385653494b1eed0.1701041440.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: Add cxl_decoders_committed() helper

[ Upstream commit 458ba8189cb4380aa6a6cc4d52ab067f80a64829 ]

Add a helper to retrieve the number of decoders committed for the port.
Replace all the open coding of the calculation with the helper.

Link: https://lore.kernel.org/linux-cxl/651c98472dfed_ae7e729495@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/169747906849.272156.1729290904857372335.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5558b92e8d39 ("cxl/core: Always hold region_rwsem while reading poison lists")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Increase num voltage states to 40

[ Upstream commit 67e38874b85b8df7b23d29f78ac3d7ecccd9519d ]

[Description]
If during driver init stage there are greater than 20
intermediary voltage states while constructing the SOC
BB we could hit issues because we will index outside of the
clock_limits array and start overwriting data. Increase the
total number of states to 40 to avoid this issue.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Call intel_pre_plane_updates() also for pipes getting enabled

[ Upstream commit d21a3962d3042e6f56ad324cf18bdd64a1e6ecfa ]

We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.

Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
(cherry picked from commit e0d5ce11ed0a21bb2bf328ad82fd261783c7ad88)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name

[ Upstream commit 99fe9ee56bd2f7358f1bc72551c2f3a6bbddf80a ]

SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but
used with the (more) correct name sclk_sdmmc. SD card tuning does currently
fail as the parent can't be found under that name.
There is no need to suffix the name with '0' since RK312x SoCs do have a
single sdmmc controller - so rename it to the name which is already used
by it's children.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3128: Fix aclk_peri_src's parent

[ Upstream commit 98dcc6be3859fb15257750b8e1d4e0eefd2c5e1e ]

According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.

Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: sunplus: return negative error code in sp_usb_phy_probe

[ Upstream commit 2a9c713825b3127ece11984abf973672c9779518 ]

devm_phy_create() return negative error code, 'ret' should be
'PTR_ERR(phy)' rather than '-PTR_ERR(phy)'.

Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120091046.163781-1-suhui@nfschina.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mediatek: mipi: mt8183: fix minimal supported frequency

[ Upstream commit 06f76e464ac81c6915430b7155769ea4ef16efe4 ]

The lowest supported clock frequency of the PHY is 125MHz (see also
mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
wrong minimal value, which will make the .enable() op return -EINVAL on
low frequencies. Fix the minimal clamping value.

Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123110202.2025585-1-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Support enforce_cache_coherency only for empty domains

[ Upstream commit e645c20e8e9cde549bc233435d3c1338e1cd27fe ]

The enforce_cache_coherency callback ensures DMA cache coherency for
devices attached to the domain.

Intel IOMMU supports enforced DMA cache coherency when the Snoop
Control bit in the IOMMU's extended capability register is set.
Supporting it differs between legacy and scalable modes.

In legacy mode, it's supported page-level by setting the SNP field
in second-stage page-table entries. In scalable mode, it's supported
in PASID-table granularity by setting the PGSNP field in PASID-table
entries.

In legacy mode, mappings before attaching to a device have SNP
fields cleared, while mappings after the callback have them set.
This means partial DMAs are cache coherent while others are not.

One possible fix is replaying mappings and flipping SNP bits when
attaching a domain to a device. But this seems to be over-engineered,
given that all real use cases just attach an empty domain to a device.

To meet practical needs while reducing mode differences, only support
enforce_cache_coherency on a domain without mappings if SNP field is
used.

Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: imu: adis16475: use bit numbers in assign_bit()

[ Upstream commit 1cd2fe4fd63e54b799a68c0856bda18f2e40caa8 ]

assign_bit() expects a bit number and not a mask like BIT(x). Hence,
just remove the BIT() macro from the #defines.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311060647.i9XyO4ej-lkp@intel.com/
Fixes: fff7352bf7a3ce ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231106150730.945-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: Add judgment on enabling round robin arbitration

[ Upstream commit 3448397a47c08c291c3fccb7ac5f0f429fd547e0 ]

Add judgment on enabling round robin arbitration to avoid
exceptions if this function is not supported.

Call trace:
 fsl_edma_resume_early+0x1d4/0x208
 dpm_run_callback+0xd4/0x304
 device_resume_early+0xb0/0x208
 dpm_resume_early+0x224/0x528
 suspend_devices_and_enter+0x3e4/0xd00
 pm_suspend+0x3c4/0x910
 state_store+0x90/0x124
 kobj_attr_store+0x48/0x64
 sysfs_kf_write+0x84/0xb4
 kernfs_fop_write_iter+0x19c/0x264
 vfs_write+0x664/0x858
 ksys_write+0xc8/0x180
 __arm64_sys_write+0x44/0x58
 invoke_syscall+0x5c/0x178
 el0_svc_common.constprop.0+0x11c/0x14c
 do_el0_svc+0x30/0x40
 el0_svc+0x58/0xa8
 el0t_64_sync_handler+0xc0/0xc4
 el0t_64_sync+0x190/0x194

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-3-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping

[ Upstream commit 2838a897654c4810153cc51646414ffa54fd23b0 ]

Some channels may be masked. When the system is suspended,
if these masked channels are not filtered out, this will
lead to null pointer operations and system crash:

Unable to handle kernel NULL pointer dereference at virtual address
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000894300000
[00000000000002a0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 989 Comm: sh Tainted: G B 6.6.0-16203-g557fb7a3ec4c-dirty #70
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc: fsl_edma_disable_request+0x3c/0x78
  lr: fsl_edma_disable_request+0x3c/0x78
  sp:ffff800089ae7690
  x29: ffff800089ae7690 x28: ffff000807ab5440 x27: ffff000807ab5830
  x26: 0000000000000008 x25: 0000000000000278 x24: 0000000000000001
  23: ffff000807ab4328 x22: 0000000000000000 x21: 0000000000000009
  x20: ffff800082616940 x19: 0000000000000000 x18: 0000000000000000
  x17: 3d3d3d3d3d3d3d3d x16: 3d3d3d3d3d3d3d3d x15: 3d3d3d3d3d3d3d3d
  x14: 3d3d3d3d3d3d3d3d x13: 3d3d3d3d3d3d3d3d x12: 1ffff00010d45724
  x11: ffff700010d45724 x10: dfff800000000000 x9: dfff800000000000
  x8: 00008fffef2ba8dc x7: 0000000000000001 x6: ffff800086a2b927
  x5: ffff800086a2b920 x4: ffff700010d45725 x3: ffff8000800d5bbc
  x2 : 0000000000000000 x1 : ffff000800c1d880 x0 : 0000000000000001
  Call trace:
   fsl_edma_disable_request+0x3c/0x78
   fsl_edma_suspend_late+0x128/0x12c
  dpm_run_callback+0xd4/0x304
   __device_suspend_late+0xd0/0x240
  dpm_suspend_late+0x174/0x59c
  suspend_devices_and_enter+0x194/0xd00
  pm_suspend+0x3c4/0x910

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-2-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data

[ Upstream commit be37542afbfcd27b3bb99a135abf9b4736b96f75 ]

AM62Ax has 3 SPI channels where each channel has 4x TX and 4x RX
threads. Also fix the thread numbers to match what the firmware expects
according to the PSI-L device description.

Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am62ax/psil_cfg.html
Fixes: aac6db7e243a ("dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA data")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231123-psil_fix-v1-1-6604d80819be@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-psil-am62: Fix SPI PDMA data

[ Upstream commit 744f5e7b69710701dc225020769138f8ca2894df ]

AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads.
This also fixes the thread numbers.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 5ac6bfb58777 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: gmii-sel: Fix register offset when parent is not a syscon node

[ Upstream commit 0f40d5099cd6d828fd7de6227d3eabe86016724c ]

When the node for this phy selector is a child node of a syscon node then the
property 'reg' is used as an offset into the parent regmap. When the node
is standalone and gets its own regmap this offset is pre-applied. So we need
to track which method was used to get the regmap and not apply the offset
in the standalone case.

Fixes: 1fdfa7cccd35 ("phy: ti: gmii-sel: Allow parent to not be syscon node")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231025143302.1265633-1-afd@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: vsie: fix wrong VIR 37 when MSO is used

[ Upstream commit 80aea01c48971a1fffc0252d036995572d84950d ]

When the host invalidates a guest page, it will also check if the page
was used to map the prefix of any guest CPUs, in which case they are
stopped and marked as needing a prefix refresh. Upon starting the
affected CPUs again, their prefix pages are explicitly faulted in and
revalidated if they had been invalidated. A bit in the PGSTEs indicates
whether or not a page might contain a prefix. The bit is allowed to
overindicate. Pages above 2G are skipped, because they cannot be
prefixes, since KVM runs all guests with MSO = 0.

The same applies for nested guests (VSIE). When the host invalidates a
guest page that maps the prefix of the nested guest, it has to stop the
affected nested guest CPUs and mark them as needing a prefix refresh.
The same PGSTE bit used for the guest prefix is also used for the
nested guest. Pages above 2G are skipped like for normal guests, which
is the source of the bug.

The nested guest runs is the guest primary address space. The guest
could be running the nested guest using MSO != 0. If the MSO + prefix
for the nested guest is above 2G, the check for nested prefix will skip
it. This will cause the invalidation notifier to not stop the CPUs of
the nested guest and not mark them as needing refresh. When the nested
guest is run again, its prefix will not be refreshed, since it has not
been marked for refresh. This will cause a fatal validity intercept
with VIR code 37.

Fix this by removing the check for 2G for nested guests. Now all
invalidations of pages with the notify bit set will always scan the
existing VSIE shadow state descriptors.

This allows to catch invalidations of nested guest prefix mappings even
when the prefix is above 2G in the guest virtual address space.

Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231102153549.53984-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: don't probe unaligned access speed if already done

[ Upstream commit c20d36cc2a2073d4cdcda92bd7a1bb9b3b3b7c79 ]

If misaligned_access_speed percpu var isn't so called "HWPROBE
MISALIGNED UNKNOWN", it means the probe has happened(this is possible
for example, hotplug off then hotplug on one cpu), and the percpu var
has been set, don't probe again in this case.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/tasks-trace: Handle new PF_IDLE semantics

[ Upstream commit a80712b9cc7e57830260ec5e1feb9cdb59e1da2f ]

The commit:

cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")

has changed the semantics of what is to be considered an idle task in
such a way that the idle task of an offline CPU may not carry the
PF_IDLE flag anymore.

However RCU-tasks-trace tests the opposite assertion, still assuming
that idle tasks carry the PF_IDLE flag during their whole lifecycle.

Remove this assumption to avoid spurious warnings but keep the initial
test verifying that the idle task is the current task on any offline
CPU.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/tasks: Handle new PF_IDLE semantics

[ Upstream commit 9715ed501b585d47444865071674c961c0cc0020 ]

The commit:

cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")

has changed the semantics of what is to be considered an idle task in
such a way that CPU boot code preceding the actual idle loop is excluded
from it.

This has however introduced new potential RCU-tasks stalls when either:

1) Grace period is started before init/0 had a chance to set PF_IDLE,
   keeping it stuck in the holdout list until idle ever schedules.

2) Grace period is started when some possible CPUs have never been
   online, keeping their idle tasks stuck in the holdout list until the
   CPU ever boots up.

3) Similar to 1) but with secondary CPUs: Grace period is started
   concurrently with secondary CPU booting, putting its idle task in
   the holdout list because PF_IDLE isn't yet observed on it. It stays
   then stuck in the holdout list until that CPU ever schedules. The
   effect is mitigated here by the hotplug AP thread that must run to
   bring the CPU up.

Fix this with handling the new semantics of PF_IDLE, keeping in mind
that it may or may not be set on an idle task. Take advantage of that to
strengthen the coverage of an RCU-tasks quiescent state within an idle
task, excluding the CPU boot code from it. Only the code running within
the idle loop is now a quiescent state, along with offline CPUs.

Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Introduce rcu_cpu_online()

[ Upstream commit 2be4686d866ad5896f2bb94d82fe892197aea9c7 ]

Export the RCU point of view as to when a CPU is considered offline
(ie: when does RCU consider that a CPU is sufficiently down in the
hotplug process to not feature any possible read side).

This will be used by RCU-tasks whose vision of an offline CPU should
reasonably match the one of RCU core.

Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Break rcu_node_0 --> &rq->__lock order

[ Upstream commit 85d68222ddc5f4522e456d97d201166acb50f716 ]

Commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") added a kfree() call to free any user
provided affinity mask, if present. It was changed later to use
kfree_rcu() in commit 9a5418bc48ba ("sched/core: Use kfree_rcu()
in do_set_cpus_allowed()") to avoid a circular locking dependency
problem.

It turns out that even kfree_rcu() isn't safe for avoiding
circular locking problem. As reported by kernel test robot,
the following circular locking dependency now exists:

  &rdp->nocb_lock --> rcu_node_0 --> &rq->__lock

Solve this by breaking the rcu_node_0 --> &rq->__lock chain by moving
the resched_cpu() out from under rcu_node lock.

[peterz: heavily borrowed from Waiman's Changelog]
[paulmck: applied Z qiang feedback]

Fixes: 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-lkp/202310302207.a25f1a30-oliver.sang@intel.com
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanup

[ Upstream commit 4b27d5c420335dad7aea1aa6e799fe1d05c63b7e ]

The acpi_thermal_unregister_thermal_zone() is paired with
acpi_thermal_register_thermal_zone() so it should mirror it.  It should
clean up all the resources that the register function allocated and
leave the stuff that was allocated elsewhere.

Unfortunately, it doesn't call thermal_zone_device_disable().  Also it
calls kfree(tz->trip_table) when it shouldn't.  That was allocated in
acpi_thermal_add().  Putting the kfree() here leads to a double free
in the acpi_thermal_add() clean up function.

Likewise, the acpi_thermal_remove() should mirror acpi_thermal_add() so
it should have an explicit kfree(tz->trip_table) as well.

Fixes: ec23c1c462de ("ACPI: thermal: Use trip point table to register thermal zones")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Fix mkey cache WQ flush

[ Upstream commit a53e215f90079f617360439b1b6284820731e34c ]

The cited patch tries to ensure no pending works on the mkey cache
workqueue by disabling adding new works and call flush_workqueue().
But this workqueue also has delayed works which might still be pending
the delay time to be queued.

Add cancel_delayed_work() for the delayed works which waits to be queued
and then the flush_workqueue() will flush all works which are already
queued and running.

Fixes: 374012b00457 ("RDMA/mlx5: Fix mkey cache possible deadlock on cleanup")
Link: https://lore.kernel.org/r/b8722f14e7ed81452f791764a26d2ed4cfa11478.1698256179.git.leon@kernel.org
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si521xx: Increase stack based print buffer size in probe

[ Upstream commit 7e52b1164a474dc7b90f68fbb40e35ccd7f7e2e2 ]

Increase the size of temporary print buffer on stack to fix the
following warnings reported by LKP.

Since all the input parameters of snprintf() are under control
of this driver, it is not possible to trigger and overflow here,
but since the print buffer is on stack and discarded once driver
probe() finishes, it is not an issue to increase it by 10 bytes
and fix the warning in the process. Make it so.

"
   drivers/clk/clk-si521xx.c: In function 'si521xx_probe':
>> drivers/clk/clk-si521xx.c:318:26: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
      snprintf(name, 6, "DIFF%d", i);
                             ^~
   drivers/clk/clk-si521xx.c:318:21: note: directive argument in the range [0, 2147483647]
      snprintf(name, 6, "DIFF%d", i);
                        ^~~~~~~~
   drivers/clk/clk-si521xx.c:318:3: note: 'snprintf' output between 6 and 15 bytes into a destination of size 6
      snprintf(name, 6, "DIFF%d", i);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"

Fixes: edc12763a3a2 ("clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260412.AGASjFN4-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231027085840.30098-1-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/mtty: Overhaul mtty interrupt handling

[ Upstream commit 293fbc28818135743f54d46c418ede3e4a20a742 ]

The mtty driver does not currently conform to the vfio SET_IRQS uAPI.
For example, it claims to support mask and unmask of INTx, but actually
does nothing.  It claims to support AUTOMASK for INTx, but doesn't.  It
fails to teardown eventfds under the full semantics specified by the
SET_IRQS ioctl.  It also fails to teardown eventfds when the device is
closed, leading to memory leaks.  It claims to support the request IRQ,
but doesn't.

Fix all these.

A side effect of this is that QEMU will now report a warning:

vfio <uuid>: Failed to set up UNMASK eventfd signaling for interrupt \
INTX-0: VFIO_DEVICE_SET_IRQS failure: Inappropriate ioctl for device

The fact is that the unmask eventfd was never supported but quietly
failed.  mtty never honored the AUTOMASK behavior, therefore there
was nothing to unmask.  QEMU is verbose about the failure, but
properly falls back to userspace unmasking.

Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20231016224736.2575718-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix EQ/AEQ interrupt issue

[ Upstream commit 5acab6eb592387191c1bb745ba9b815e1e076db5 ]

During hisilicon accelerator live migration operation. In order to
prevent the problem of EQ/AEQ interrupt loss. Migration driver will
trigger an EQ/AEQ doorbell at the end of the migration.

This operation may cause double interruption of EQ/AEQ events.
To ensure that the EQ/AEQ interrupt processing function is normal.
The interrupt handling functionality of EQ/AEQ needs to be updated.
Used to handle repeated interrupts event.

Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix double free during reset

[ Upstream commit 01aed663e6c421aeafc9c330bda630976b50a764 ]

There is no need to free the reset_data structure if the recovery is
unsuccessful and the reset is synchronous. The function
adf_dev_aer_schedule_reset() handles the cleanup properly. Only
asynchronous resets require such structure to be freed inside the reset
worker.

Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: xts - use 'spawn' for underlying single-block cipher

[ Upstream commit bb40d32689d73c46de39a0529d551f523f21dc9b ]

Since commit adad556efcdd ("crypto: api - Fix built-in testing
dependency failures"), the following warning appears when booting an
x86_64 kernel that is configured with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and CONFIG_CRYPTO_AES_NI_INTEL=y,
even when CONFIG_CRYPTO_XTS=y and CONFIG_CRYPTO_AES=y:

    alg: skcipher: skipping comparison tests for xts-aes-aesni because xts(ecb(aes-generic)) is unavailable

This is caused by an issue in the xts template where it allocates an
"aes" single-block cipher without declaring a dependency on it via the
crypto_spawn mechanism.  This issue was exposed by the above commit
because it reversed the order that the algorithms are tested in.

Specifically, when "xts(ecb(aes-generic))" is instantiated and tested
during the comparison tests for "xts-aes-aesni", the "xts" template
allocates an "aes" crypto_cipher for encrypting tweaks.  This resolves
to "aes-aesni".  (Getting "aes-aesni" instead of "aes-generic" here is a
bit weird, but it's apparently intended.)  Due to the above-mentioned
commit, the testing of "aes-aesni", and the finalization of its
registration, now happens at this point instead of before.  At the end
of that, crypto_remove_spawns() unregisters all algorithm instances that
depend on a lower-priority "aes" implementation such as "aes-generic"
but that do not depend on "aes-aesni".  However, because "xts" does not
use the crypto_spawn mechanism for its "aes", its dependency on
"aes-aesni" is not recognized by crypto_remove_spawns().  Thus,
crypto_remove_spawns() unexpectedly unregisters "xts(ecb(aes-generic))".

Fix this issue by making the "xts" template use the crypto_spawn
mechanism for its "aes" dependency, like what other templates do.

Note, this fix could be applied as far back as commit f1c131b45410
("crypto: xts - Convert to skcipher").  However, the issue only got
exposed by the much more recent changes to how the crypto API runs the
self-tests, so there should be no need to backport this to very old
kernels.  Also, an alternative fix would be to flip the list iteration
order in crypto_start_tests() to restore the original testing order.
I'm thinking we should do that too, since the original order seems more
natural, but it shouldn't be relied on for correctness.

Fixes: adad556efcdd ("crypto: api - Fix built-in testing dependency failures")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Align output skeleton ELF code

[ Upstream commit 23671f4dfd10b48b4a2fee4768886f0d8ec55b7e ]

libbpf accesses the ELF data requiring at least 8 byte alignment,
however, the data is generated into a C string that doesn't guarantee
alignment. Fix this by assigning to an aligned char array. Use sizeof
on the array, less one for the \0 terminator, rather than generating a
constant.

Fixes: a6cc6b34b93e ("bpftool: Provide a helper method for accessing skeleton's embedded ELF data")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231007044439.25171-1-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Fix -Wcast-qual warning

[ Upstream commit ebc8484d0e6da9e6c9e8cfa1f40bf94e9c6fc512 ]

This cast was made by purpose for older libbpf where the
bpf_object_skeleton field is void * instead of const void *
to eliminate a warning (as i understand
-Wincompatible-pointer-types-discards-qualifiers) but this
cast introduces another warning (-Wcast-qual) for libbpf
where data field is const void *

It makes sense for bpftool to be in sync with libbpf from
kernel sources

Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230907090210.968612-1-dzagorui@cisco.com
Stable-dep-of: 23671f4dfd10 ("bpftool: Align output skeleton ELF code")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: derive delack_max from rto_min

[ Upstream commit bbf80d713fe75cfbecda26e7c03a9a8d22af2f4f ]

While BPF allows to set icsk->->icsk_delack_max
and/or icsk->icsk_rto_min, we have an ip route
attribute (RTAX_RTO_MIN) to be able to tune rto_min,
but nothing to consequently adjust max delayed ack,
which vary from 40ms to 200 ms (TCP_DELACK_{MIN|MAX}).

This makes RTAX_RTO_MIN of almost no practical use,
unless customers are in big trouble.

Modern days datacenter communications want to set
rto_min to ~5 ms, and the max delayed ack one jiffie
smaller to avoid spurious retransmits.

After this patch, an "rto_min 5" route attribute will
effectively lower max delayed ack timers to 4 ms.

Note in the following ss output, "rto:6 ... ato:4"

$ ss -temoi dst XXXXXX
State Recv-Q Send-Q           Local Address:Port       Peer Address:Port  Process
ESTAB 0      0        [2002:a05:6608:295::]:52950   [2002:a05:6608:297::]:41597
     ino:255134 sk:1001 <->
         skmem:(r0,rb1707063,t872,tb262144,f0,w0,o0,bl0,d0) ts sack
 cubic wscale:8,8 rto:6 rtt:0.02/0.002 ato:4 mss:4096 pmtu:4500
 rcvmss:536 advmss:4096 cwnd:10 bytes_sent:54823160 bytes_acked:54823121
 bytes_received:54823120 segs_out:1370582 segs_in:1370580
 data_segs_out:1370579 data_segs_in:1370578 send 16.4Gbps
 pacing_rate 32.6Gbps delivery_rate 1.72Gbps delivered:1370579
 busy:26920ms unacked:1 rcv_rtt:34.615 rcv_space:65920
 rcv_ssthresh:65535 minrtt:0.015 snd_wnd:65536

While we could argue this patch fixes a bug with RTAX_RTO_MIN,
I do not add a Fixes: tag, so that we can soak it a bit before
asking backports to stable branches.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qcom: camss: Fix genpd cleanup

[ Upstream commit f69791c39745e64621216fe8919cb73c0065002b ]

Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.

Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qcom: camss: Fix V4L2 async notifier error path

[ Upstream commit b278080a89f452063915beda0ade6b3ed5ee4271 ]

Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.

Rename the label from err_cleanup to err_v4l2_device_unregister to capture
what the jump does.

Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix old name in commit log: err_v4l2_device_register -> err_v4l2_device_unregister]
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: add multi-buffer support for sockets sharing umem

[ Upstream commit d609f3d228a8efe991f44f11f24146e2a5209755 ]

Userspace applications indicate their multi-buffer capability to xsk
using XSK_USE_SG socket bind flag. For sockets using shared umem the
bind flag may contain XSK_USE_SG only for the first socket. For any
subsequent socket the only option supported is XDP_SHARED_UMEM.

Add option XDP_UMEM_SG_FLAG in umem config flags to store the
multi-buffer handling capability when indicated by XSK_USE_SG option in
bing flag by the first socket. Use this to derive multi-buffer capability
for subsequent sockets in xsk core.

Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Fixes: 81470b5c3c66 ("xsk: introduce XSK_USE_SG bind flag for xsk socket")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230907035032.2627879-1-tirthendu.sarkar@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/memory-failure: pass the folio and the page to collect_procs()

[ Upstream commit 376907f3a0b34a17e80417825f8cc1c40fcba81b ]

Patch series "Three memory-failure fixes".

I've been looking at the memory-failure code and I believe I have found
three bugs that need fixing -- one going all the way back to 2010!  I'll
have more patches later to use folios more extensively but didn't want
these bugfixes to get caught up in that.

This patch (of 3):

Both collect_procs_anon() and collect_procs_file() iterate over the VMA
interval trees looking for a single pgoff, so it is wrong to look for the
pgoff of the head page as is currently done.  However, it is also wrong to
look at page->mapping of the precise page as this is invalid for tail
pages.  Clear up the confusion by passing both the folio and the precise
page to collect_procs().

Link: https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231218135837.3310403-2-willy@infradead.org
Fixes: 415c64c1453a ("mm/memory-failure: split thp earlier in memory error handling")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: convert DAX lock/unlock page to lock/unlock folio

[ Upstream commit 91e79d22be75fec88ae58d274a7c9e49d6215099 ]

The one caller of DAX lock/unlock page already calls compound_head(), so
use page_folio() instead, then use a folio throughout the DAX code to
remove uses of page->mapping and page->index.

[jane.chu@oracle.com: add comment to mf_generic_kill_procss(), simplify mf_generic_kill_procs:folio initialization]
Link: https://lkml.kernel.org/r/20230908222336.186313-1-jane.chu@oracle.com
Link: https://lkml.kernel.org/r/20230822231314.349200-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 376907f3a0b3 ("mm/memory-failure: pass the folio and the page to collect_procs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Implement missing SO_TIMESTAMPING_NEW cmsg support

[ Upstream commit 382a32018b74f407008615e0e831d05ed28e81cd ]

Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.

Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/netdev/6a7281bf-bc4a-4f75-bb88-7011908ae471@app.fastmail.com/
Signed-off-by: Thomas Lange <thomas@corelatus.se>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104085744.49164-1-thomas@corelatus.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()

[ Upstream commit e009b2efb7a8850498796b360043ac25c8d3d28f ]

The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().

Fixes: 19241368443f ("bnxt_en: Send PF driver unload notification to all VFs.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ravb: Wait for operating mode to be applied

[ Upstream commit 9039cd4c61635b2d541009a7cd5e2cc052402f28 ]

CSR.OPS bits specify the current operating mode and (according to
documentation) they are updated by HW when the operating mode change
request is processed. To comply with this check CSR.OPS before proceeding.

Commit introduces ravb_set_opmode() that does all the necessities for
setting the operating mode (set CCC.OPC (and CCC.GAC, CCC.CSEL, if any) and
wait for CSR.OPS) and call it where needed. This should comply with all the
HW manuals requirements as different manual variants specify that different
modes need to be checked in CSR.OPS when setting CCC.OPC.

If gPTP active in config mode is supported and it needs to be enabled, the
CCC.GAC and CCC.CSEL needs to be configured along with CCC.OPC in the same
write access. For this, ravb_set_opmode() allows passing GAC and CSEL as
part of opmode and the function updates accordingly CCC register.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

asix: Add check for usbnet_get_endpoints

[ Upstream commit eaac6a2d26b65511e164772bec6918fcbc61938e ]

Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.

Fixes: 16626b0cc3d5 ("asix: Add a new driver for the AX88172A")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Re-enable MAC TX in otx2_stop processing

[ Upstream commit 818ed8933bd17bc91a9fa8b94a898189c546fc1a ]

During QoS scheduling testing with multiple strict priority flows, the
netdev tx watchdog timeout routine is invoked when a low priority QoS
queue doesn't get a chance to transmit the packets because other high
priority flows are completely subscribing the transmit link. The netdev
tx watchdog timeout routine will stop MAC RX and TX functionality in
otx2_stop() routine before cleanup of HW TX queues which results in SMQ
flush errors because the packets belonging to low priority queues will
never gets flushed since MAC TX is disabled. This patch fixes the issue
by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed
properly.

Fixes: a7faa68b4e7f ("octeontx2-af: Start/Stop traffic in CGX along with NPC")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Always configure NIX TX link credits based on max frame size

[ Upstream commit a0d9528f6daf7fe8de217fa80a94d2989d2a57a7 ]

Currently the NIX TX link credits are initialized based on the max frame
size that can be transmitted on a link but when the MTU is changed, the
NIX TX link credits are reprogrammed by the SW based on the new MTU value.
Since SMQ max packet length is programmed to max frame size by default,
there is a chance that NIX TX may stall while sending a max frame sized
packet on the link with insufficient credits to send the packet all at
once. This patch avoids stall issue by not changing the link credits
dynamically when the MTU is changed.

Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix invalid link access in dumping SMC-R connections

[ Upstream commit 9dbe086c69b8902c85cece394760ac212e9e4ccc ]

A crash was found when dumping SMC-R connections. It can be reproduced
by following steps:

- environment: two RNICs on both sides.
- run SMC-R between two sides, now a SMC_LGR_SYMMETRIC type link group
  will be created.
- set the first RNIC down on either side and link group will turn to
  SMC_LGR_ASYMMETRIC_LOCAL then.
- run 'smcss -R' and the crash will be triggered.

 BUG: kernel NULL pointer dereference, address: 0000000000000010
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 8000000101fdd067 P4D 8000000101fdd067 PUD 10ce46067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 3 PID: 1810 Comm: smcss Kdump: loaded Tainted: G W   E      6.7.0-rc6+ #51
 RIP: 0010:__smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
 Call Trace:
  <TASK>
  ? __die+0x24/0x70
  ? page_fault_oops+0x66/0x150
  ? exc_page_fault+0x69/0x140
  ? asm_exc_page_fault+0x26/0x30
  ? __smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
  smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
  smc_diag_dump+0x26/0x60 [smc_diag]
  netlink_dump+0x19f/0x320
  __netlink_dump_start+0x1dc/0x300
  smc_diag_handler_dump+0x6a/0x80 [smc_diag]
  ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
  sock_diag_rcv_msg+0x121/0x140
  ? __pfx_sock_diag_rcv_msg+0x10/0x10
  netlink_rcv_skb+0x5a/0x110
  sock_diag_rcv+0x28/0x40
  netlink_unicast+0x22a/0x330
  netlink_sendmsg+0x240/0x4a0
  __sock_sendmsg+0xb0/0xc0
  ____sys_sendmsg+0x24e/0x300
  ? copy_msghdr_from_user+0x62/0x80
  ___sys_sendmsg+0x7c/0xd0
  ? __do_fault+0x34/0x1a0
  ? do_read_fault+0x5f/0x100
  ? do_fault+0xb0/0x110
  __sys_sendmsg+0x4d/0x80
  do_syscall_64+0x45/0xf0
  entry_SYSCALL_64_after_hwframe+0x6e/0x76

When the first RNIC is set down, the lgr->lnk[0] will be cleared and an
asymmetric link will be allocated in lgr->link[SMC_LINKS_PER_LGR_MAX - 1]
by smc_llc_alloc_alt_link(). Then when we try to dump SMC-R connections
in __smc_diag_dump(), the invalid lgr->lnk[0] will be accessed, resulting
in this issue. So fix it by accessing the right link.

Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Reported-by: henaumars <henaumars@sina.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7616
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703662835-53416-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues

[ Upstream commit 89f45c30172c80e55c887f32f1af8e184124577b ]

When dma_alloc_coherent() fails, we should free qdev->lrg_buf
to prevent potential memleak.

Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue based on the MTU.")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231227070227.10527-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: fix missing dma unmap for resize

[ Upstream commit 2311e06b9bf3d44e15f9175af177a782806f688f ]

For rq, we have three cases getting buffers from virtio core:

1. virtqueue_get_buf{,_ctx}
2. virtqueue_detach_unused_buf
3. callback for virtqueue_resize

But in commit 295525e29a5b("virtio_net: merge dma operations when
filling mergeable buffers"), I missed the dma unmap for the #3 case.

That will leak some memory, because I did not release the pages referred
by the unused buffers.

If we do such script, we will make the system OOM.

    while true
    do
            ethtool -G ens4 rx 128
            ethtool -G ens4 rx 256
            free -m
    done

Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20231226094333.47740-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: avoid data-races on dev->stats fields

[ Upstream commit d12a26b74fb77434b73fe39022266c4b00907219 ]

Use DEV_STATS_INC() and DEV_STATS_READ() which provide
atomicity on paths that can be used concurrently.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2311e06b9bf3 ("virtio_net: fix missing dma unmap for resize")
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix move_mount mediation by detecting if source is detached

[ Upstream commit 8026e40608b4d552216d2a818ca7080a4264bb44 ]

Prevent move_mount from applying the attach_disconnected flag
to move_mount(). This prevents detached mounts from appearing
as / when applying mount mediation, which is not only incorrect
but could result in bad policy being generated.

Basic mount rules like
  allow mount,
  allow mount options=(move) -> /target/,

will allow detached mounts, allowing older policy to continue
to function. New policy gains the ability to specify `detached` as
a source option
  allow mount detached -> /target/,

In addition make sure support of move_mount is advertised as
a feature to userspace so that applications that generate policy
can respond to the addition.

Note: this fixes mediation of move_mount when a detached mount is used,
      it does not fix the broader regression of apparmor mediation of
      mounts under the new mount api.

Link: https://lore.kernel.org/all/68c166b8-5b4d-4612-8042-1dee3334385b@leemhuis.info/T/#mb35fdde37f999f08f0b02d58dc1bf4e6b65b8da2
Fixes: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Fix hicredit calculation

[ Upstream commit 947dfc8138dfaeb6e966e2d661de89eb203e3064 ]

According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.

Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.

Update hicredit accordingly.

Fixes: 1ab011b0bf07 ("igc: Add support for CBS offloading")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Rodrigo Cataldo <rodrigo.cadore@l-acoustics.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Restore VF MSI-X state during PCI reset

[ Upstream commit 371e576ff3e8580d91d49026e5d5faebf5565558 ]

During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.

Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.

Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler")
Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF mux

[ Upstream commit b036d8ef3120b996751495ce25994eea58032a98 ]

When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.

Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-toacodec: Fix event generation

[ Upstream commit 172c88244b5f2d3375403ebb504d407be0fded59 ]

When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.

Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-tohdmitx: Validate written enum values

[ Upstream commit 1e001206804be3f3d21f4a1cf16e5d059d75643f ]

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-toacodec: Validate written enum values

[ Upstream commit 3150b70e944ead909260285dfb5707d0bedcf87b ]

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>