Randy Dunlap [Sun, 29 Nov 2020 18:32:48 +0000 (10:32 -0800)]
net/tipc: fix all function Return: notation
Fix Return: kernel-doc notation in all net/tipc/ source files.
Also keep ReST list notation intact for output formatting.
Fix a few typos in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:49 +0000 (10:32 -0800)]
net/tipc: fix socket.c kernel-doc
Fix socket.c kernel-doc warnings in preparation for adding to the
networking docbook.
Also, for rcvbuf_limit(), use bullet notation so that the lines do
not run together.
../net/tipc/socket.c:130: warning: Function parameter or member 'cong_links' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'probe_unacked' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'snd_win' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'peer_caps' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'rcv_win' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'group' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'oneway' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'nagle_start' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'snd_backlog' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'msg_acc' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'pkt_cnt' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'expect_ack' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'nodelay' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'group_is_open' not described in 'tipc_sock'
../net/tipc/socket.c:267: warning: Function parameter or member 'sk' not described in 'tsk_advance_rx_queue'
../net/tipc/socket.c:295: warning: Function parameter or member 'sk' not described in 'tsk_rej_rx_queue'
../net/tipc/socket.c:295: warning: Function parameter or member 'error' not described in 'tsk_rej_rx_queue'
../net/tipc/socket.c:894: warning: Function parameter or member 'tsk' not described in 'tipc_send_group_msg'
../net/tipc/socket.c:1187: warning: Function parameter or member 'net' not described in 'tipc_sk_mcast_rcv'
../net/tipc/socket.c:1323: warning: Function parameter or member 'inputq' not described in 'tipc_sk_conn_proto_rcv'
../net/tipc/socket.c:1323: warning: Function parameter or member 'xmitq' not described in 'tipc_sk_conn_proto_rcv'
../net/tipc/socket.c:1885: warning: Function parameter or member 'sock' not described in 'tipc_recvmsg'
../net/tipc/socket.c:1993: warning: Function parameter or member 'sock' not described in 'tipc_recvstream'
../net/tipc/socket.c:2313: warning: Function parameter or member 'xmitq' not described in 'tipc_sk_filter_rcv'
../net/tipc/socket.c:2404: warning: Function parameter or member 'xmitq' not described in 'tipc_sk_enqueue'
../net/tipc/socket.c:2456: warning: Function parameter or member 'net' not described in 'tipc_sk_rcv'
../net/tipc/socket.c:2693: warning: Function parameter or member 'kern' not described in 'tipc_accept'
../net/tipc/socket.c:3816: warning: Excess function parameter 'sysctl_tipc_sk_filter' description in 'tipc_sk_filtering'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:47 +0000 (10:32 -0800)]
net/tipc: fix node.c kernel-doc
Fix node.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/node.c:141: warning: Function parameter or member 'kref' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'bc_entry' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'failover_sent' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_id' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_id_string' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'conn_sks' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'keepalive_intv' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'timer' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_net' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_hash_mix' not described in 'tipc_node'
../net/tipc/node.c:273: warning: Function parameter or member '__n' not described in 'tipc_node_crypto_rx'
../net/tipc/node.c:822: warning: Function parameter or member 'n' not described in '__tipc_node_link_up'
../net/tipc/node.c:822: warning: Function parameter or member 'bearer_id' not described in '__tipc_node_link_up'
../net/tipc/node.c:822: warning: Function parameter or member 'xmitq' not described in '__tipc_node_link_up'
../net/tipc/node.c:888: warning: Function parameter or member 'n' not described in 'tipc_node_link_up'
../net/tipc/node.c:888: warning: Function parameter or member 'bearer_id' not described in 'tipc_node_link_up'
../net/tipc/node.c:888: warning: Function parameter or member 'xmitq' not described in 'tipc_node_link_up'
../net/tipc/node.c:948: warning: Function parameter or member 'n' not described in '__tipc_node_link_down'
../net/tipc/node.c:948: warning: Function parameter or member 'bearer_id' not described in '__tipc_node_link_down'
../net/tipc/node.c:948: warning: Function parameter or member 'xmitq' not described in '__tipc_node_link_down'
../net/tipc/node.c:948: warning: Function parameter or member 'maddr' not described in '__tipc_node_link_down'
../net/tipc/node.c:1537: warning: Function parameter or member 'net' not described in 'tipc_node_get_linkname'
../net/tipc/node.c:1537: warning: Function parameter or member 'len' not described in 'tipc_node_get_linkname'
../net/tipc/node.c:1891: warning: Function parameter or member 'n' not described in 'tipc_node_check_state'
../net/tipc/node.c:1891: warning: Function parameter or member 'xmitq' not described in 'tipc_node_check_state'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:46 +0000 (10:32 -0800)]
net/tipc: fix name_table.c kernel-doc
Fix name_table.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/name_table.c:115: warning: Function parameter or member 'start' not described in 'service_range_foreach_match'
../net/tipc/name_table.c:115: warning: Function parameter or member 'end' not described in 'service_range_foreach_match'
../net/tipc/name_table.c:127: warning: Function parameter or member 'start' not described in 'service_range_match_first'
../net/tipc/name_table.c:127: warning: Function parameter or member 'end' not described in 'service_range_match_first'
../net/tipc/name_table.c:176: warning: Function parameter or member 'start' not described in 'service_range_match_next'
../net/tipc/name_table.c:176: warning: Function parameter or member 'end' not described in 'service_range_match_next'
../net/tipc/name_table.c:225: warning: Function parameter or member 'type' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'lower' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'upper' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'scope' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'node' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'port' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'key' not described in 'tipc_publ_create'
../net/tipc/name_table.c:252: warning: Function parameter or member 'type' not described in 'tipc_service_create'
../net/tipc/name_table.c:252: warning: Function parameter or member 'hd' not described in 'tipc_service_create'
../net/tipc/name_table.c:367: warning: Function parameter or member 'sr' not described in 'tipc_service_remove_publ'
../net/tipc/name_table.c:367: warning: Function parameter or member 'node' not described in 'tipc_service_remove_publ'
../net/tipc/name_table.c:367: warning: Function parameter or member 'key' not described in 'tipc_service_remove_publ'
../net/tipc/name_table.c:383: warning: Function parameter or member 'pa' not described in 'publication_after'
../net/tipc/name_table.c:383: warning: Function parameter or member 'pb' not described in 'publication_after'
../net/tipc/name_table.c:401: warning: Function parameter or member 'service' not described in 'tipc_service_subscribe'
../net/tipc/name_table.c:401: warning: Function parameter or member 'sub' not described in 'tipc_service_subscribe'
../net/tipc/name_table.c:546: warning: Function parameter or member 'net' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:546: warning: Function parameter or member 'type' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:546: warning: Function parameter or member 'instance' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:546: warning: Function parameter or member 'dnode' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:762: warning: Function parameter or member 'net' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'type' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'lower' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'upper' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'key' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:796: warning: Function parameter or member 'sub' not described in 'tipc_nametbl_subscribe'
../net/tipc/name_table.c:826: warning: Function parameter or member 'sub' not described in 'tipc_nametbl_unsubscribe'
../net/tipc/name_table.c:876: warning: Function parameter or member 'net' not described in 'tipc_service_delete'
../net/tipc/name_table.c:876: warning: Function parameter or member 'sc' not described in 'tipc_service_delete'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:45 +0000 (10:32 -0800)]
net/tipc: fix name_distr.c kernel-doc
Fix name_distr.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/name_distr.c:55: warning: Function parameter or member 'i' not described in 'publ_to_item'
../net/tipc/name_distr.c:55: warning: Function parameter or member 'p' not described in 'publ_to_item'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'net' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'type' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'size' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'dest' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:88: warning: Function parameter or member 'net' not described in 'tipc_named_publish'
../net/tipc/name_distr.c:88: warning: Function parameter or member 'publ' not described in 'tipc_named_publish'
../net/tipc/name_distr.c:116: warning: Function parameter or member 'net' not described in 'tipc_named_withdraw'
../net/tipc/name_distr.c:116: warning: Function parameter or member 'publ' not described in 'tipc_named_withdraw'
../net/tipc/name_distr.c:147: warning: Function parameter or member 'net' not described in 'named_distribute'
../net/tipc/name_distr.c:147: warning: Function parameter or member 'seqno' not described in 'named_distribute'
../net/tipc/name_distr.c:199: warning: Function parameter or member 'net' not described in 'tipc_named_node_up'
../net/tipc/name_distr.c:199: warning: Function parameter or member 'dnode' not described in 'tipc_named_node_up'
../net/tipc/name_distr.c:199: warning: Function parameter or member 'capabilities' not described in 'tipc_named_node_up'
../net/tipc/name_distr.c:225: warning: Function parameter or member 'net' not described in 'tipc_publ_purge'
../net/tipc/name_distr.c:225: warning: Function parameter or member 'publ' not described in 'tipc_publ_purge'
../net/tipc/name_distr.c:225: warning: Function parameter or member 'addr' not described in 'tipc_publ_purge'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'net' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'i' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'node' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'dtype' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'net' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'namedq' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'rcv_nxt' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'open' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:383: warning: Function parameter or member 'net' not described in 'tipc_named_reinit'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:44 +0000 (10:32 -0800)]
net/tipc: fix link.c kernel-doc
Fix link.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/link.c:200: warning: Function parameter or member 'session' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'snd_nxt_state' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'rcv_nxt_state' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'in_session' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'active' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'if_name' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'rst_cnt' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'drop_point' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'failover_reasm_skb' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'failover_deferdq' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'transmq' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'backlog' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'snd_nxt' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'rcv_unacked' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'deferdq' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'window' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'min_win' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'ssthresh' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'max_win' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'cong_acks' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'checkpoint' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'reasm_tnlmsg' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'last_gap' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'last_ga' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'bc_rcvlink' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'bc_sndlink' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'nack_state' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'bc_peer_is_up' not described in 'tipc_link'
../net/tipc/link.c:473: warning: Function parameter or member 'self' not described in 'tipc_link_create'
../net/tipc/link.c:473: warning: Function parameter or member 'peer_id' not described in 'tipc_link_create'
../net/tipc/link.c:473: warning: Excess function parameter 'ownnode' description in 'tipc_link_create'
../net/tipc/link.c:544: warning: Function parameter or member 'ownnode' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'peer' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'peer_id' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'peer_caps' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'bc_sndlink' not described in 'tipc_link_bc_create'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:42 +0000 (10:32 -0800)]
net/tipc: fix bearer.c for kernel-doc
Fix kernel-doc warnings in bearer.c:
../net/tipc/bearer.c:77: warning: Function parameter or member 'name' not described in 'tipc_media_find'
../net/tipc/bearer.c:91: warning: Function parameter or member 'type' not described in 'media_find_id'
../net/tipc/bearer.c:105: warning: Function parameter or member 'buf' not described in 'tipc_media_addr_printf'
../net/tipc/bearer.c:105: warning: Function parameter or member 'len' not described in 'tipc_media_addr_printf'
../net/tipc/bearer.c:105: warning: Function parameter or member 'a' not described in 'tipc_media_addr_printf'
../net/tipc/bearer.c:174: warning: Function parameter or member 'net' not described in 'tipc_bearer_find'
../net/tipc/bearer.c:174: warning: Function parameter or member 'name' not described in 'tipc_bearer_find'
../net/tipc/bearer.c:238: warning: Function parameter or member 'net' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'name' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'disc_domain' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'prio' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'attr' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:350: warning: Function parameter or member 'net' not described in 'tipc_reset_bearer'
../net/tipc/bearer.c:350: warning: Function parameter or member 'b' not described in 'tipc_reset_bearer'
../net/tipc/bearer.c:374: warning: Function parameter or member 'net' not described in 'bearer_disable'
../net/tipc/bearer.c:374: warning: Function parameter or member 'b' not described in 'bearer_disable'
../net/tipc/bearer.c:462: warning: Function parameter or member 'net' not described in 'tipc_l2_send_msg'
../net/tipc/bearer.c:479: warning: Function parameter or member 'net' not described in 'tipc_l2_send_msg'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:50 +0000 (10:32 -0800)]
net/tipc: fix various kernel-doc warnings
kernel-doc and Sphinx fixes to eliminate lots of warnings
in preparation for adding to the networking docbook.
../net/tipc/crypto.c:57: warning: cannot understand function prototype: 'enum '
../net/tipc/crypto.c:69: warning: cannot understand function prototype: 'enum '
../net/tipc/crypto.c:130: warning: Function parameter or member 'tfm' not described in 'tipc_tfm'
../net/tipc/crypto.c:130: warning: Function parameter or member 'list' not described in 'tipc_tfm'
../net/tipc/crypto.c:172: warning: Function parameter or member 'stat' not described in 'tipc_crypto_stats'
../net/tipc/crypto.c:232: warning: Function parameter or member 'flags' not described in 'tipc_crypto'
../net/tipc/crypto.c:329: warning: Function parameter or member 'ukey' not described in 'tipc_aead_key_validate'
../net/tipc/crypto.c:329: warning: Function parameter or member 'info' not described in 'tipc_aead_key_validate'
../net/tipc/crypto.c:482: warning: Function parameter or member 'aead' not described in 'tipc_aead_tfm_next'
../net/tipc/trace.c:43: warning: cannot understand function prototype: 'unsigned long sysctl_tipc_sk_filter[5] __read_mostly = '
Documentation/networking/tipc:57: ../net/tipc/msg.c:584: WARNING: Unexpected indentation.
Documentation/networking/tipc:63: ../net/tipc/name_table.c:536: WARNING: Unexpected indentation.
Documentation/networking/tipc:63: ../net/tipc/name_table.c:537: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/tipc:78: ../net/tipc/socket.c:3809: WARNING: Unexpected indentation.
Documentation/networking/tipc:78: ../net/tipc/socket.c:3807: WARNING: Inline strong start-string without end-string.
Documentation/networking/tipc:72: ../net/tipc/node.c:904: WARNING: Unexpected indentation.
Documentation/networking/tipc:39: ../net/tipc/crypto.c:97: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/tipc:39: ../net/tipc/crypto.c:98: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/tipc:39: ../net/tipc/crypto.c:141: WARNING: Inline strong start-string without end-string.
../net/tipc/discover.c:82: warning: Function parameter or member 'skb' not described in 'tipc_disc_init_msg'
../net/tipc/msg.c:69: warning: Function parameter or member 'gfp' not described in 'tipc_buf_acquire'
../net/tipc/msg.c:382: warning: Function parameter or member 'offset' not described in 'tipc_msg_build'
../net/tipc/msg.c:708: warning: Function parameter or member 'net' not described in 'tipc_msg_lookup_dest'
../net/tipc/subscr.c:65: warning: Function parameter or member 'seq' not described in 'tipc_sub_check_overlap'
../net/tipc/subscr.c:65: warning: Function parameter or member 'found_lower' not described in 'tipc_sub_check_overlap'
../net/tipc/subscr.c:65: warning: Function parameter or member 'found_upper' not described in 'tipc_sub_check_overlap'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'proto' not described in 'udp_media_addr'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'port' not described in 'udp_media_addr'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'ipv4' not described in 'udp_media_addr'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'ipv6' not described in 'udp_media_addr'
../net/tipc/udp_media.c:98: warning: Function parameter or member 'rcast' not described in 'udp_bearer'
Also fixed a typo of "duest" to "dest".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 18:32:43 +0000 (10:32 -0800)]
net/tipc: fix tipc header files for kernel-doc
Fix tipc header files for adding to the networking docbook.
Remove some uses of "/**" that were not kernel-doc notation.
Fix some source formatting to eliminate Sphinx warnings.
Add missing struct member and function argument kernel-doc descriptions.
Correct the description of a couple of struct members that were
marked as "(FIXME)".
Documentation/networking/tipc:18: ../net/tipc/name_table.h:65: WARNING: Unexpected indentation.
Documentation/networking/tipc:18: ../net/tipc/name_table.h:66: WARNING: Block quote ends without a blank line; unexpected unindent.
../net/tipc/bearer.h:128: warning: Function parameter or member 'min_win' not described in 'tipc_media'
../net/tipc/bearer.h:128: warning: Function parameter or member 'max_win' not described in 'tipc_media'
../net/tipc/bearer.h:171: warning: Function parameter or member 'min_win' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'max_win' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'disc' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'up' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'refcnt' not described in 'tipc_bearer'
../net/tipc/name_distr.h:68: warning: Function parameter or member 'port' not described in 'distr_item'
../net/tipc/name_table.h:111: warning: Function parameter or member 'services' not described in 'name_table'
../net/tipc/name_table.h:111: warning: Function parameter or member 'cluster_scope_lock' not described in 'name_table'
../net/tipc/name_table.h:111: warning: Function parameter or member 'rc_dests' not described in 'name_table'
../net/tipc/name_table.h:111: warning: Function parameter or member 'snd_nxt' not described in 'name_table'
../net/tipc/subscr.h:67: warning: Function parameter or member 'kref' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'net' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'service_list' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'conid' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'inactive' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'lock' not described in 'tipc_subscription'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 1 Dec 2020 23:21:15 +0000 (15:21 -0800)]
Merge branch 'mlxsw-add-support-for-802-1ad-bridging'
Ido Schimmel says:
====================
mlxsw: Add support for 802.1ad bridging
802.1ad, also known as QinQ, is an extension to the 802.1q standard,
which is concerned with passing possibly 802.1q-tagged packets through
another VLAN-like tunnel. The format of 802.1ad tag is the same as
802.1q, except it uses the EtherType of 0x88a8, unlike 802.1q's 0x8100.
Currently, mlxsw supports bridging with VLAN-unaware (802.1d) bridges
and with VLAN-aware bridges whose VLAN protocol is 802.1q. This set adds
support for VLAN-aware bridges whose VLAN protocol is 802.1ad.
From mlxsw perspective, 802.1ad support entails two main changes:
1. Ports member in an 802.1ad bridge need to be configured to classify
802.1ad packets as tagged and all other packets as untagged
2. When pushing a VLAN at ingress (PVID), its EtherType needs to be
0x88a8 instead of 802.1q's 0x8100
The rest stays the same as with 802.1q bridges.
A follow-up patch set will add support for QinQ with VXLAN, also known
as QinVNI. Currently, linking of a VXLAN netdev to an 802.1ad bridge is
vetoed and an error is returned to user space.
Patch set overview:
Patches #1-#2 add the registers required to configure the two changes
described above.
Patch #3 changes the device to only treat 802.1q packets as tagged by
default, as opposed to both 802.1q and 802.1ad packets. This is more
inline with the behavior supported by the driver.
Patch #4 adds the ability to configure the EtherType when pushing a PVID
at ingress.
Patch #5 performs small refactoring to allow for code re-use in the next
patch.
Patch #6 adds support for 802.1ad bridging and allows mlxsw ports and
their uppers to join such a bridge.
Patch #7 changes the bridge driver to notify about changes to its VLAN
protocol, so that these could be vetoed by mlxsw in the next patch.
Patches #8-#9 teach mlxsw to veto unsupported 802.1ad configurations and
add a corresponding selftest to make sure such configurations are indeed
vetoed.
====================
Link: https://lore.kernel.org/r/20201129125407.1391557-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Danielle Ratson [Sun, 29 Nov 2020 12:54:07 +0000 (14:54 +0200)]
selftests: forwarding: Add QinQ veto testing
Test that each veto that was added in the previous patch, is indeed
vetoed.
$ ./q_in_q_veto.sh
TEST: create 802.1ad vlan upper on top of a front panel [ OK ]
TEST: create 802.1ad vlan upper on top of a bridge port [ OK ]
TEST: create 802.1ad vlan upper on top of a lag [ OK ]
TEST: create 802.1ad vlan upper on top 802.1q bridge [ OK ]
TEST: create 802.1ad vlan upper on top 802.1ad bridge [ OK ]
TEST: create 802.1q vlan upper on top 802.1ad bridge [ OK ]
TEST: create vlan upper on top of front panel enslaved to 802.1ad bridge
[ OK ]
TEST: create vlan upper on top of lag enslaved to 802.1ad bridge [ OK ]
TEST: enslave front panel with vlan upper to 802.1ad bridge [ OK ]
TEST: enslave lag with vlan upper to 802.1ad bridge [ OK ]
TEST: IP address addition to 802.1ad bridge [ OK ]
TEST: switch bridge protocol [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Danielle Ratson [Sun, 29 Nov 2020 12:54:06 +0000 (14:54 +0200)]
mlxsw: Add QinQ configuration vetoes
After adding support for QinQ, a.k.a 802.1ad protocol, there are a few
scenarios that should be vetoed.
The vetoes are motivated by various ASIC limitations.
For example, a port that is member in a 802.1ad bridge cannot have 802.1q
uppers as the port needs to be configured to treat 802.1q packets as
untagged packets.
Veto all those unsupported scenarios and return suitable messages.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Danielle Ratson [Sun, 29 Nov 2020 12:54:05 +0000 (14:54 +0200)]
bridge: switchdev: Notify about VLAN protocol changes
Drivers that support bridge offload need to be notified about changes to
the bridge's VLAN protocol so that they could react accordingly and
potentially veto the change.
Add a new switchdev attribute to communicate the change to drivers.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Sun, 29 Nov 2020 12:54:04 +0000 (14:54 +0200)]
mlxsw: spectrum_switchdev: Add support of QinQ traffic
802.1ad, also known as QinQ is an extension to the 802.1q standard, which
is concerned with passing possibly 802.1q-tagged packets through another
VLAN-like tunnel. The format of 802.1ad tag is the same as 802.1q, except
it uses the EtherType of 0x88a8, unlike 802.1q's 0x8100.
Add support for 802.1ad protocol. Most of the configuration is the same
as 802.1q. The difference is that before a port joins an 802.1ad bridge it
needs to be configured to recognize 802.1ad packets as tagged and other
packets (e.g., 802.1q) as untagged.
VXLAN is not currently supported with 802.1ad bridge, so return an error
with an appropriate extack message.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Sun, 29 Nov 2020 12:54:03 +0000 (14:54 +0200)]
mlxsw: spectrum_switchdev: Create common functions for VLAN-aware bridge
The code in mlxsw_sp_bridge_8021q_port_{join, leave}() can be used also
for 802.1ad bridge.
Move the code to functions called
mlxsw_sp_bridge_vlan_aware_port_{join, leave}() and call them from
mlxsw_sp_bridge_8021q_port_{join, leave}() respectively to enable code
reuse.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Sun, 29 Nov 2020 12:54:02 +0000 (14:54 +0200)]
mlxsw: Make EtherType configurable when pushing VLAN at ingress
Currently, when pushing a PVID at ingress, mlxsw always uses 802.1q
EtherType.
Make this EtherType configurable by extending mlxsw_sp_port_pvid_set()
with an EtherType argument.
This is a preparation for QinQ support, that needs to push a PVID with
802.1ad EtherType.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Sun, 29 Nov 2020 12:54:01 +0000 (14:54 +0200)]
mlxsw: spectrum: Only treat 802.1q packets as tagged packets
By default, the device considers both 802.1ad and 802.1q packets as tagged,
but this is not supported by the driver. It only supports VLAN and bridge
devices that use 802.1q protocol.
Instead, configure the device to only treat 802.1q packets as tagged
packets.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Sun, 29 Nov 2020 12:54:00 +0000 (14:54 +0200)]
mlxsw: reg: Add et_vlan field to SPVID register
et_vlan field is used to configure which EtherType is used when VLAN is
pushed at ingress (for untagged packets or for QinQ push mode).
It will be used to configure tagging with ether_type1 (i.e., 0x88A8) for
QinQ mode.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Sun, 29 Nov 2020 12:53:59 +0000 (14:53 +0200)]
mlxsw: reg: Add Switch Port VLAN Classification Register
SPVC configures the port to identify packets as untagged / single tagged /
double tagged packets based on the packet EtherTypes.
It will be used to classify 802.1q packets as untagged and 802.1ad packets
as tagged when received by ports member in a 802.1ad bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 1 Dec 2020 23:16:33 +0000 (15:16 -0800)]
Merge branch 'net-hns3-updates-for-next'
Huazhong Tan says:
====================
net: hns3: updates for -next
This series includes some updates for the HNS3 ethernet driver.
#1~#6: add some updates related to the checksum offload.
#7: add support for multiple TCs' MAC pauce mode.
====================
Link: https://lore.kernel.org/r/1606535510-44346-1-git-send-email-tanhuazhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yonglong Liu [Sat, 28 Nov 2020 03:51:50 +0000 (11:51 +0800)]
net: hns3: keep MAC pause mode when multiple TCs are enabled
Bellow HNAE3_DEVICE_VERSION_V3, MAC pause mode just support one
TC, when enabled multiple TCs, force enable PFC mode.
HNAE3_DEVICE_VERSION_V3 can support MAC pause mode on multiple
TCs, so when enable multiple TCs, just keep MAC pause mode,
and enable PFC mode just according to the user settings.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huazhong Tan [Sat, 28 Nov 2020 03:51:49 +0000 (11:51 +0800)]
net: hns3: add a check for devcie's verion in hns3_tunnel_csum_bug()
For the device whose version is above V3(include V3), the hardware
can do checksum offload for the non-tunnel udp packet, who has
a dest port as the IANA assigned. So add a check for devcie's verion
in hns3_tunnel_csum_bug().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huazhong Tan [Sat, 28 Nov 2020 03:51:48 +0000 (11:51 +0800)]
net: hns3: add more info to hns3_dbg_bd_info()
Since TX hardware checksum and RX completion checksum have been
supported now, so add related information in hns3_dbg_bd_info().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huazhong Tan [Sat, 28 Nov 2020 03:51:47 +0000 (11:51 +0800)]
net: hns3: add udp tunnel checksum segmentation support
For the device who has the capability to handle udp tunnel
checksum segmentation, add support for it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huazhong Tan [Sat, 28 Nov 2020 03:51:46 +0000 (11:51 +0800)]
net: hns3: remove unsupported NETIF_F_GSO_UDP_TUNNEL_CSUM
Currently, device V1 and V2 do not support segmentation
offload for UDP based tunnel packet who needs outer UDP
checksum offload, so there is a workaround in the driver
to set the checksum of the outer UDP checksum as zero. This
is not what the user wants, so remove this feature for
device V1 and V2, add support for it later(when the device
has the ability to do that).
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huazhong Tan [Sat, 28 Nov 2020 03:51:45 +0000 (11:51 +0800)]
net: hns3: add support for TX hardware checksum offload
For the device that supports TX hardware checksum, the hardware
can calculate the checksum from the start and fill the checksum
to the offset position, which reduces the operations of
calculating the type and header length of L3/L4. So add this
feature for the HNS3 ethernet driver.
The previous simple BD description is unsuitable, rename it as
HW TX CSUM.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huazhong Tan [Sat, 28 Nov 2020 03:51:44 +0000 (11:51 +0800)]
net: hns3: add support for RX completion checksum
In some cases (for example ip fragment), hardware will
calculate the checksum of whole packet in RX, and setup
the HNS3_RXD_L2_CSUM_B flag in the descriptor, so add
support to utilize this checksum.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Fri, 27 Nov 2020 09:34:21 +0000 (10:34 +0100)]
net/ipv6: propagate user pointer annotation
For IPV6_2292PKTOPTIONS, do_ipv6_getsockopt() stores the user pointer
optval in the msg_control field of the msghdr.
Hence, sparse rightfully warns at ./net/ipv6/ipv6_sockglue.c:1151:33:
warning: incorrect type in assignment (different address spaces)
expected void *msg_control
got char [noderef] __user *optval
Since commit
1f466e1f15cf ("net: cleanly handle kernel vs user buffers for
->msg_control"), user pointers shall be stored in the msg_control_user
field, and kernel pointers in the msg_control field. This allows to
propagate __user annotations nicely through this struct.
Store optval in msg_control_user to properly record and propagate the
memory space annotation of this pointer.
Note that msg_control_is_user is set to true, so the key invariant, i.e.,
use msg_control_user if and only if msg_control_is_user is true, holds.
The msghdr is further used in the six alternative put_cmsg() calls, with
msg_control_is_user being true, put_cmsg() picks msg_control_user
preserving the __user annotation and passes that properly to
copy_to_user().
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201127093421.21673-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marco Elver [Wed, 25 Nov 2020 22:48:40 +0000 (23:48 +0100)]
net: switch to storing KCOV handle directly in sk_buff
It turns out that usage of skb extensions can cause memory leaks. Ido
Schimmel reported: "[...] there are instances that blindly overwrite
'skb->extensions' by invoking skb_copy_header() after __alloc_skb()."
Therefore, give up on using skb extensions for KCOV handle, and instead
directly store kcov_handle in sk_buff.
Fixes:
6370cc3bbd8a ("net: add kcov handle to skb extensions")
Fixes:
85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET")
Fixes:
97f53a08cba1 ("net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling")
Link: https://lore.kernel.org/linux-wireless/20201121160941.GA485907@shredder.lan/
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20201125224840.2014773-1-elver@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vlad Buslov [Fri, 27 Nov 2020 15:12:05 +0000 (17:12 +0200)]
net: sched: remove redundant 'rtnl_held' argument
Functions tfilter_notify_chain() and tcf_get_next_proto() are always called
with rtnl lock held in current implementation. Moreover, attempting to call
them without rtnl lock would cause a warning down the call chain in
function __tcf_get_next_proto() that requires the lock to be held by
callers. Remove the 'rtnl_held' argument in order to simplify the code and
make rtnl lock requirement explicit.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20201127151205.23492-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 1 Dec 2020 03:03:31 +0000 (19:03 -0800)]
Merge tag 'linux-can-next-for-5.11-
20201130' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-11-30
Gustavo A. R. Silva's patch for the pcan_usb driver fixes fall-through warnings
for Clang.
The next 5 patches target the mcp251xfd driver and are by Ursula Maplehurst and
me. They optimizie the TEF and RX path by reducing number of SPI core requests
to set the UINC bit.
The remaining 8 patches target the m_can driver. The first 4 are various
cleanups for the SPI binding driver (tcan4x5x) by Sean Nyekjaer, Dan Murphy and
me. Followed by 4 cleanup patches by me for the m_can and m_can_platform
driver.
* tag 'linux-can-next-for-5.11-
20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: m_can_class_unregister(): move right after m_can_class_register()
can: m_can: m_can_plat_remove(): remove unneeded platform_set_drvdata()
can: m_can: remove not used variable struct m_can_classdev::freq
can: m_can: Kconfig: convert the into menu
can: tcan4x5x: tcan4x5x_can_probe(): remove probe failed error message
can: tcan4x5x: remove mram_start and reg_offset from struct tcan4x5x_priv
can: tcan4x5x: rename parse_config() function
can: tcan4x5x: tcan4x5x_clear_interrupts(): remove redundant return statement
can: mcp251xfd: tef-path: reduce number of SPI core requests to set UINC bit
can: mcp251xfd: move struct mcp251xfd_tef_ring definition
can: mcp251xfd: struct mcp251xfd_priv::tef to array of length 1
can: mcp25xxfd: rx-path: reduce number of SPI core requests to set UINC bit
can: mcp251xfd: mcp25xxfd_ring_alloc(): add define instead open coding the maximum number of RX objects
can: pcan_usb_core: fix fall-through warnings for Clang
====================
Link: https://lore.kernel.org/r/20201130141432.278219-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Fri, 27 Nov 2020 16:57:34 +0000 (08:57 -0800)]
net: wan: remove trailing semicolon in macro definition
The macro use will already have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201127165734.2694693-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 1 Dec 2020 01:55:26 +0000 (17:55 -0800)]
Merge branch 'mptcp-avoid-workqueue-usage-for-data'
Paolo Abeni says:
====================
mptcp: avoid workqueue usage for data
The current locking schema used to protect the MPTCP data-path
requires the usage of the MPTCP workqueue to process the incoming
data, depending on trylock result.
The above poses scalability limits and introduces random delays
in MPTCP-level acks.
With this series we use a single spinlock to protect the MPTCP
data-path, removing the need for workqueue and delayed ack usage.
This additionally reduces the number of atomic operations required
per packet and cleans-up considerably the poll/wake-up code.
====================
Link: https://lore.kernel.org/r/cover.1606413118.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Fri, 27 Nov 2020 10:10:27 +0000 (11:10 +0100)]
mptcp: use mptcp release_cb for delayed tasks
We have some tasks triggered by the subflow receive path
which require to access the msk socket status, specifically:
mptcp_clean_una() and mptcp_push_pending()
We have almost everything in place to defer to the msk
release_cb such tasks when the msk sock is owned.
Since the worker is no more used to clean the acked data,
for fallback sockets we need to explicitly flush them.
As an added bonus we can move the wake-up code in __mptcp_clean_una(),
simplify a lot mptcp_poll() and move the timer update under
the data lock.
The worker is now used only to process and send DATA_FIN
packets and do the mptcp-level retransmissions.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Fri, 27 Nov 2020 10:10:26 +0000 (11:10 +0100)]
mptcp: avoid a few atomic ops in the rx path
Extending the data_lock scope in mptcp_incoming_option
we can use that to protect both snd_una and wnd_end.
In the typical case, we will have a single atomic op instead of 2
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Fri, 27 Nov 2020 10:10:25 +0000 (11:10 +0100)]
mptcp: allocate TX skbs in msk context
Move the TX skbs allocation in mptcp_sendmsg() scope,
and tentatively pre-allocate a skbs number proportional
to the sendmsg() length.
Use the ssk tx skb cache to prevent the subflow allocation.
This allows removing the msk skb extension cache and will
make possible the later patches.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Fri, 27 Nov 2020 10:10:24 +0000 (11:10 +0100)]
mptcp: protect the rx path with the msk socket spinlock
Such spinlock is currently used only to protect the 'owned'
flag inside the socket lock itself. With this patch, we extend
its scope to protect the whole msk receive path and
sk_forward_memory.
Given the above, we can always move data into the msk receive
queue (and OoO queue) from the subflow.
We leverage the previous commit, so that we need to acquire the
spinlock in the tx path only when moving fwd memory.
recvmsg() must now explicitly acquire the socket spinlock
when moving skbs out of sk_receive_queue. To reduce the number of
lock operations required we use a second rx queue and splice the
first into the latter in mptcp_lock_sock(). Additionally rmem
allocated memory is bulk-freed via release_cb()
Acked-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Fri, 27 Nov 2020 10:10:23 +0000 (11:10 +0100)]
mptcp: implement wmem reservation
This leverages the previous commit to reserve the wmem
required for the sendmsg() operation when the msk socket
lock is first acquired.
Some heuristics are used to get a reasonable [over] estimation of
the whole memory required. If we can't forward alloc such amount
fallback to a reasonable small chunk, otherwise enter the wait
for memory path.
When sendmsg() needs more memory it looks at wmem_reserved
first and if that is exhausted, move more space from
sk_forward_alloc.
The reserved memory is not persistent and is released at the
next socket unlock via the release_cb().
Overall this will simplify the next patch.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Fri, 27 Nov 2020 10:10:22 +0000 (11:10 +0100)]
mptcp: open code mptcp variant for lock_sock
This allows invoking an additional callback under the
socket spin lock.
Will be used by the next patches to avoid additional
spin lock contention.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 1 Dec 2020 01:32:03 +0000 (17:32 -0800)]
Merge branch 'dpaa_eth-add-xdp-support'
Camelia Groza says:
====================
dpaa_eth: add XDP support
Enable XDP support for the QorIQ DPAA1 platforms.
Implement all the current actions (DROP, ABORTED, PASS, TX, REDIRECT). No
Tx batching is added at this time.
Additional XDP_PACKET_HEADROOM bytes are reserved in each frame's headroom.
After transmit, a reference to the xdp_frame is saved in the buffer for
clean-up on confirmation in a newly created structure for software
annotations. DPAA_TX_PRIV_DATA_SIZE bytes are reserved in the buffer for
storing this structure and the XDP program is restricted from accessing
them.
The driver shares the egress frame queues used for XDP with the network
stack. The DPAA driver is a LLTX driver so no explicit locking is required
on transmission.
====================
Link: https://lore.kernel.org/r/cover.1606322126.git.camelia.groza@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Camelia Groza [Wed, 25 Nov 2020 16:53:36 +0000 (18:53 +0200)]
dpaa_eth: implement the A050385 erratum workaround for XDP
For XDP TX, even tough we start out with correctly aligned buffers, the
XDP program might change the data's alignment. For REDIRECT, we have no
control over the alignment either.
Create a new workaround for xdp_frame structures to verify the erratum
conditions and move the data to a fresh buffer if necessary. Create a new
xdp_frame for managing the new buffer and free the old one using the XDP
API.
Due to alignment constraints, all frames have a 256 byte headroom that
is offered fully to XDP under the erratum. If the XDP program uses all
of it, the data needs to be move to make room for the xdpf backpointer.
Disable the metadata support since the information can be lost.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Camelia Groza [Wed, 25 Nov 2020 16:53:35 +0000 (18:53 +0200)]
dpaa_eth: rename current skb A050385 erratum workaround
Explicitly point that the current workaround addresses skbs. This change is
in preparation for adding a workaround for XDP scenarios.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Camelia Groza [Wed, 25 Nov 2020 16:53:34 +0000 (18:53 +0200)]
dpaa_eth: add XDP_REDIRECT support
After transmission, the frame is returned on confirmation queues for
cleanup. For this, store a backpointer to the xdp_frame in the private
reserved area at the start of the TX buffer.
No TX batching support is implemented at this time.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Camelia Groza [Wed, 25 Nov 2020 16:53:33 +0000 (18:53 +0200)]
dpaa_eth: add XDP_TX support
Use an xdp_frame structure for managing the frame. Store a backpointer to
the structure at the start of the buffer before enqueueing for cleanup
on TX confirmation. Reserve DPAA_TX_PRIV_DATA_SIZE bytes from the frame
size shared with the XDP program for this purpose. Use the XDP
API for freeing the buffer when it returns to the driver on the TX
confirmation path.
The frame queues are shared with the netstack. The DPAA driver is a LLTX
driver so no explicit locking is required on transmission.
This approach will be reused for XDP REDIRECT.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Camelia Groza [Wed, 25 Nov 2020 16:53:32 +0000 (18:53 +0200)]
dpaa_eth: limit the possible MTU range when XDP is enabled
Implement the ndo_change_mtu callback to prevent users from setting an
MTU that would permit processing of S/G frames. The maximum MTU size
is dependent on the buffer size.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Camelia Groza [Wed, 25 Nov 2020 16:53:31 +0000 (18:53 +0200)]
dpaa_eth: add basic XDP support
Implement the XDP_DROP and XDP_PASS actions.
Avoid draining and reconfiguring the buffer pool at each XDP
setup/teardown by increasing the frame headroom and reserving
XDP_PACKET_HEADROOM bytes from the start. Since we always reserve an
entire page per buffer, this change only impacts Jumbo frame scenarios
where the maximum linear frame size is reduced by 256 bytes. Multi
buffer Scatter/Gather frames are now used instead in these scenarios.
Allow XDP programs to access the entire buffer.
The data in the received frame's headroom can be overwritten by the XDP
program. Extract the relevant fields from the headroom while they are
still available, before running the XDP program.
Since the headroom might be resized before the frame is passed up to the
stack, remove the check for a fixed headroom value when building an skb.
Allow the meta data to be updated and pass the information up the stack.
Scatter/Gather frames are dropped when XDP is enabled.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Camelia Groza [Wed, 25 Nov 2020 16:53:30 +0000 (18:53 +0200)]
dpaa_eth: add struct for software backpointers
We maintain an skb backpointer in the software annotations area of Tx
frames. Introduce a structure for explicit handling.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde [Mon, 30 Nov 2020 13:37:13 +0000 (14:37 +0100)]
can: m_can: m_can_class_unregister(): move right after m_can_class_register()
This patch moves the function m_can_class_unregister() directly after the
m_can_class_register() function.
Link: https://lore.kernel.org/r/20201130133713.269256-7-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Mon, 30 Nov 2020 13:37:12 +0000 (14:37 +0100)]
can: m_can: m_can_plat_remove(): remove unneeded platform_set_drvdata()
There's no need to unset the drvdata on remove, so remove the unneeded call to
platform_set_drvdata() in m_can_plat_remove().
Link: https://lore.kernel.org/r/20201130133713.269256-6-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Mon, 30 Nov 2020 13:37:11 +0000 (14:37 +0100)]
can: m_can: remove not used variable struct m_can_classdev::freq
This patch removes the unused variable freq from the struct m_can_classdev.
Link: https://lore.kernel.org/r/20201130133713.269256-5-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Mon, 30 Nov 2020 13:37:10 +0000 (14:37 +0100)]
can: m_can: Kconfig: convert the into menu
Since there is more than one base driver for the m_can core, let's
convert this into a menu.
Link: https://lore.kernel.org/r/20201130133713.269256-4-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Mon, 30 Nov 2020 13:37:09 +0000 (14:37 +0100)]
can: tcan4x5x: tcan4x5x_can_probe(): remove probe failed error message
The driver core already emits a probe failed error message, so remove this one
from the driver.
Link: https://lore.kernel.org/r/20201130133713.269256-3-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Mon, 30 Nov 2020 13:37:08 +0000 (14:37 +0100)]
can: tcan4x5x: remove mram_start and reg_offset from struct tcan4x5x_priv
Both struct tcan4x5x_priv::mram_start and struct tcan4x5x_priv::reg_offset are
only assigned once with a constant and then always used read-only. This patch
changes the driver to use the constant directly instead.
Link: https://lore.kernel.org/r/20201130133713.269256-2-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dan Murphy [Wed, 26 Feb 2020 14:03:58 +0000 (08:03 -0600)]
can: tcan4x5x: rename parse_config() function
Rename the tcan4x5x_parse_config() function to tcan4x5x_get_gpios() since the
function retrieves the gpio configurations from the firmware.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20200226140358.30017-1-dmurphy@ti.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sean Nyekjaer [Wed, 11 Dec 2019 14:16:35 +0000 (15:16 +0100)]
can: tcan4x5x: tcan4x5x_clear_interrupts(): remove redundant return statement
This patch removes a redundant return at the end of
tcan4x5x_clear_interrupts().
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: http://lore.kernel.org/r/20191211141635.322577-1-sean@geanix.com
Reported-by: Daniels Umanovskis <daniels@umanovskis.se>
Acked-by: Dan Murphy <dmurphy@ti.com>
Fixes:
5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 26 Nov 2020 13:21:44 +0000 (14:21 +0100)]
can: mcp251xfd: tef-path: reduce number of SPI core requests to set UINC bit
Reduce the number of separate SPI core requests when setting the UINC bit in
the TEF FIFO, and instead batch them up into a single SPI core request.
Link: https://lore.kernel.org/r/20201126132144.351154-6-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 26 Nov 2020 13:21:43 +0000 (14:21 +0100)]
can: mcp251xfd: move struct mcp251xfd_tef_ring definition
This patch moves the struct mcp251xfd_tef_ring upwards, so that the union
mcp251xfd_write_reg_buf and struct spi_transfer can be made members of it.
Link: https://lore.kernel.org/r/20201126132144.351154-5-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 26 Nov 2020 13:21:42 +0000 (14:21 +0100)]
can: mcp251xfd: struct mcp251xfd_priv::tef to array of length 1
This patch converts the struct mcp251xfd_tef_ring member within the struct
mcp251xfd_priv into an array of length one. This way all rings (tef, tx and rx)
can be accessed in the same way.
Link: https://lore.kernel.org/r/20201126132144.351154-4-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ursula Maplehurst [Thu, 26 Nov 2020 13:21:41 +0000 (14:21 +0100)]
can: mcp25xxfd: rx-path: reduce number of SPI core requests to set UINC bit
Reduce the number of separate SPI core requests when setting the UINC bit in
the RX FIFO, and instead batch them up into a single SPI core request.
Link: https://github.com/marckleinebudde/linux/issues/4
Link: https://lore.kernel.org/r/20201126132144.351154-3-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Ursula Maplehurst <ursula@kangatronix.co.uk>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 26 Nov 2020 13:21:40 +0000 (14:21 +0100)]
can: mcp251xfd: mcp25xxfd_ring_alloc(): add define instead open coding the maximum number of RX objects
This patch add a define for the maximum number of RX objects instead of open
coding it.
Link: https://lore.kernel.org/r/20201126132144.351154-2-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Gustavo A. R. Silva [Wed, 25 Nov 2020 09:33:26 +0000 (10:33 +0100)]
can: pcan_usb_core: fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by
moving the "default" to the end of the "switch" statement and explicitly adding
a break statement instead of letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: http://lore.kernel.org/r/aab7cf16bf43cc7c3e9c9930d2dae850c1d07a3c.1605896059.git.gustavoars@kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
[mkl: move default to end]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jakub Kicinski [Sat, 28 Nov 2020 20:14:01 +0000 (12:14 -0800)]
Merge branch 'net-ipa-start-adding-ipa-v4-5-support'
Alex Elder says:
====================
net: ipa: start adding IPA v4.5 support
This series starts updating the IPA code to support IPA hardware
version 4.5.
The first patch fixes a problem found while preparing these updates.
Testing shows the code works with or without the change, and with
the fix the code matches "downstream" Qualcomm code.
The second patch updates the definitions for IPA register offsets
and field masks to reflect the changes that come with IPA v4.5. A
few register updates have been deferred until later, because making
use of them involves some nontrivial code updates.
One type of change that IPA v4.5 brings is expanding the range of
certain configuration values. High-order bits are added in a few
cases, and the third patch implements the code changes necessary to
use those newly available bits.
The fourth patch implements several fairly minor changes to the code
required for IPA v4.5 support.
The last two patches implement changes to the GSI registers used for
IPA. Almost none of the registers change, but the range of memory
in which most of the GSI registers is located is shifted by a fixed
amount. The fifth patch updates the GSI register definitions, and
the last patch implements the memory shift for IPA v4.5.
====================
Link: https://lore.kernel.org/r/20201125204522.5884-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 25 Nov 2020 20:45:22 +0000 (14:45 -0600)]
net: ipa: adjust GSI register addresses
The offsets for almost all GSI registers we use have different
offsets starting at IPA version 4.5. Only two registers remain
in their original location.
In a way though, the new register locations are not *that*
different. The entire group of affected registers has simply
been shifted down in memory by a fixed amount (0xd000). So for
example, the channel context 0 register that has a base offset of
0x0001c000 for "older" hardware now has a base offset of 0x0000f000.
This patch aims to add support for IPA v4.5 registers at their new
offets in a way that minimizes the amount of code that needs to
change. It is not ideal, but it avoids the need to maintain
a nearly complete set of additional register offset definitions.
The approach takes advantage of the fact that when accessing GSI
registers we do not access any of memory at lower end of the "gsi"
memory range (with two exceptions already noted). In particular,
we do not access anything within the bottom 0xd000 bytes of the
GSI memory range.
For IPA version 4.5, after we map the GSI memory, we adjust the
virtual memory pointer downward by the fixed amount (0xd000).
That way, register accesses using the offsets defined by the
existing GSI_REG_*() macros will resolve to the proper locations
for IPA version 4.5.
The two registers *not* affected by this offset are accessed only
in gsi_irq_setup(). There, for IPA version 4.5, we undo the general
register adjustment by adding the fixed amount back to the virtual
address to access these registers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 25 Nov 2020 20:45:21 +0000 (14:45 -0600)]
net: ipa: update gsi registers for IPA v4.5
Very few GSI register definitions change for IPA v4.5, however
as a group their position in memory shifts a constant amount
(handled by the next commit).
Add definitions and update comments to the set of GSI registers to
support changes that come with IPA v4.5.
Update the logic in gsi_channel_program() to accommodate the new
(expanded) PREFETCH_MODE field in the CH_C_QOS register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 25 Nov 2020 20:45:20 +0000 (14:45 -0600)]
net: ipa: add support to code for IPA v4.5
Update the IPA code to make use of the updated IPA v4.5 register
definitions. Generally what this patch does is, if IPA v4.5
hardware is in use:
- Ensure new registers or fields in IPA v4.5 are updated where
required
- Ensure registers or fields not supported in IPA v4.5 are not
examined when read, or are set to 0 when written
It does this while preserving the existing functionality for IPA
versions lower than v4.5.
The values to program for QSB_MAX_READS and QSB_MAX_WRITES and the
source and destination resource counts are updated to be correct for
all versions through v4.5 as well.
Note that IPA_RESOURCE_GROUP_SRC_MAX and IPA_RESOURCE_GROUP_DST_MAX
already reflect that 5 is an acceptable number of resources (which
IPA v4.5 implements).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 25 Nov 2020 20:45:19 +0000 (14:45 -0600)]
net: ipa: add new most-significant bits to registers
IPA v4.5 adds a few fields to the endpoint header and extended
header configuration registers that represent new high-order bits
for certain offsets and sizes. Add code to incorporate these upper
bits into the registers for IPA v4.5.
This includes creating ipa_header_size_encoded(), which handles
encoding the metadata offset field for use in the ENDP_INIT_HDR
register in a way appropriate for the hardware version. This and
ipa_metadata_offset_encoded() ensure the mask argument passed to
u32_encode_bits() is constant.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 25 Nov 2020 20:45:18 +0000 (14:45 -0600)]
net: ipa: update IPA registers for IPA v4.5
Update "ipa_reg.h" so that register definitions support IPA hardware
version 4.5, in addition to versions 3.5.1 through v4.2. Most of
the register definitions are the same, but in some cases fields are
added, changed, or eliminated.
Updates for a few IPA v4.5 registers are more complex, and adding
those definition will be deferred to separate patches. This patch
only updates the register offset and field definitions, and adds
informational comments.
The only code change avoids accessing the backward compatibility
register for IPA version 4.5 in ipa_hardware_config(). Other IPA
v4.5-specific code changes will come later.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Wed, 25 Nov 2020 20:45:17 +0000 (14:45 -0600)]
net: ipa: reverse logic on escape buffer use
Starting with IPA v4.2 there is a GSI channel option to use an
"escape buffer" instead of prefetch buffers. This should be used
for all channels *except* the AP command TX channel. The logic
that implements this has it backwards; fix this bug.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcelo Ricardo Leitner [Thu, 26 Nov 2020 18:40:49 +0000 (15:40 -0300)]
net/sched: act_ct: enable stats for HW offloaded entries
By setting NF_FLOWTABLE_COUNTER. Otherwise, the updates added by
commit
ef803b3cf96a ("netfilter: flowtable: add counter support in HW
offload") are not effective when using act_ct.
While at it, now that we have the flag set, protect the call to
nf_ct_acct_update() by commit
beb97d3a3192 ("net/sched: act_ct: update
nf_conn_acct for act_ct SW offload in flowtable") with the check on
NF_FLOWTABLE_COUNTER, as also done on other places.
Note that this shouldn't impact performance as these stats are only
enabled when net.netfilter.nf_conntrack_acct is enabled.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: wenxu <wenxu@ucloud.cn>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/481a65741261fd81b0a0813e698af163477467ec.1606415787.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 02:25:27 +0000 (18:25 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 01:34:04 +0000 (17:34 -0800)]
Merge branch 'tipc-some-minor-improvements'
Jon Maloy says:
====================
tipc: some minor improvements
We add some improvements that will be useful in future commits.
====================
Link: https://lore.kernel.org/r/20201125182915.711370-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Maloy [Wed, 25 Nov 2020 18:29:15 +0000 (13:29 -0500)]
tipc: update address terminology in code
We update the terminology in the code so that deprecated structure
names and macros are replaced with those currently recommended in
the user API.
struct tipc_portid -> struct tipc_socket_addr
struct tipc_name -> struct tipc_service_addr
struct tipc_name_seq -> struct tipc_service_range
TIPC_ADDR_ID -> TIPC_SOCKET_ADDR
TIPC_ADDR_NAME -> TIPC_SERVICE_ADDR
TIPC_ADDR_NAMESEQ -> TIPC_SERVICE_RANGE
TIPC_CFG_SRV -> TIPC_NODE_STATE
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Maloy [Wed, 25 Nov 2020 18:29:14 +0000 (13:29 -0500)]
tipc: make node number calculation reproducible
The 32-bit node number, aka node hash or node address, is calculated
based on the 128-bit node identity when it is not set explicitly by
the user. In future commits we will need to perform this hash operation
on peer nodes while feeling safe that we obtain the same result.
We do this by interpreting the initial hash as a network byte order
number. Whenever we need to use the number locally on a node
we must therefore translate it to host byte order to obtain an
architecure independent result.
Furthermore, given the context where we use this number, we must not
allow it to be zero unless the node identity also is zero. Hence, in
the rare cases when the xor-ed hash value may end up as zero we replace
it with a fix number, knowing that the code anyway is capable of
handling hash collisions.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Maloy [Wed, 25 Nov 2020 18:29:13 +0000 (13:29 -0500)]
tipc: refactor tipc_sk_bind() function
We refactor the tipc_sk_bind() function, so that the lock handling
is handled separately from the logics. We also move some sanity
tests to earlier in the call chain, to the function tipc_bind().
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Fri, 27 Nov 2020 12:36:21 +0000 (13:36 +0100)]
net: phy: micrel: fix interrupt handling
After migration to the shared interrupt support, the KSZ8031 PHY with
enabled interrupt support was not able to notify about link status
change.
Fixes:
59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201127123621.31234-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 01:23:01 +0000 (17:23 -0800)]
Merge branch 'net-x25-netdev-event-handling'
Martin Schiller says:
====================
net/x25: netdev event handling
====================
Link: https://lore.kernel.org/r/20201126063557.1283-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Thu, 26 Nov 2020 06:35:57 +0000 (07:35 +0100)]
net/x25: remove x25_kill_by_device()
Remove obsolete function x25_kill_by_device(). It's not used any more.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Thu, 26 Nov 2020 06:35:56 +0000 (07:35 +0100)]
net/x25: fix restart request/confirm handling
We have to take the actual link state into account to handle
restart requests/confirms well.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Thu, 26 Nov 2020 06:35:55 +0000 (07:35 +0100)]
net/lapb: fix t1 timer handling for LAPB_STATE_0
1. DTE interface changes immediately to LAPB_STATE_1 and start sending
SABM(E).
2. DCE interface sends N2-times DM and changes to LAPB_STATE_1
afterwards if there is no response in the meantime.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Thu, 26 Nov 2020 06:35:54 +0000 (07:35 +0100)]
net/lapb: support netdev events
This patch allows layer2 (LAPB) to react to netdev events itself and
avoids the detour via layer3 (X.25).
1. Establish layer2 on NETDEV_UP events, if the carrier is already up.
2. Call lapb_disconnect_request() on NETDEV_GOING_DOWN events to signal
the peer that the connection will go down.
(Only when the carrier is up.)
3. When a NETDEV_DOWN event occur, clear all queues, enter state
LAPB_STATE_0 and stop all timers.
4. The NETDEV_CHANGE event makes it possible to handle carrier loss and
detection.
In case of Carrier Loss, clear all queues, enter state LAPB_STATE_0
and stop all timers.
In case of Carrier Detection, we start timer t1 on a DCE interface,
and on a DTE interface we change to state LAPB_STATE_1 and start
sending SABM(E).
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Thu, 26 Nov 2020 06:35:53 +0000 (07:35 +0100)]
net/x25: handle additional netdev events
1. Add / remove x25_link_device by NETDEV_REGISTER/UNREGISTER and also
by NETDEV_POST_TYPE_CHANGE/NETDEV_PRE_TYPE_CHANGE.
This change is needed so that the x25_neigh struct for an interface
is already created when it shows up and is kept independently if the
interface goes UP or DOWN.
This is used in an upcomming commit, where x25 params of an neighbour
will get configurable through ioctls.
2. NETDEV_CHANGE event makes it possible to handle carrier loss and
detection. If carrier is lost, clean up everything related to this
neighbour by calling x25_link_terminated().
3. Also call x25_link_terminated() for NETDEV_DOWN events and remove the
call to x25_clear_forward_by_dev() in x25_route_device_down(), as
this is already called by x25_kill_by_neigh() which gets called by
x25_link_terminated().
4. Do nothing for NETDEV_UP and NETDEV_GOING_DOWN events, as these will
be handled in layer 2 (LAPB) and layer3 (X.25) will be informed by
layer2 when layer2 link is established and layer3 link should be
initiated.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 01:17:37 +0000 (17:17 -0800)]
Merge branch 'mlxsw-update-adjacency-index-more-efficiently'
Ido Schimmel says:
====================
mlxsw: Update adjacency index more efficiently
The device supports an operation that allows the driver to issue one
request to update the adjacency index for all the routes in a given
virtual router (VR) from old index and size to new ones. This is useful
in case the configuration of a certain nexthop group is updated and its
adjacency index changes.
Currently, the driver does not use this operation in an efficient
manner. It iterates over all the routes using the nexthop group and
issues an update request for the VR if it is not the same as the
previous VR.
Instead, this patch set tracks the VRs in which the nexthop group is
used and issues one request for each VR.
Example:
8k IPv6 routes were added in an alternating manner to two VRFs. All the
routes are using the same nexthop object ('nhid 1').
Before:
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
16,385 devlink:devlink_hwmsg
4.
255933213 seconds time elapsed
0.
000000000 seconds user
0.
666923000 seconds sys
Number of EMAD transactions corresponds to number of routes using the
nexthop group.
After:
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
3 devlink:devlink_hwmsg
0.
077655094 seconds time elapsed
0.
000000000 seconds user
0.
076698000 seconds sys
Number of EMAD transactions corresponds to number of VRFs / VRs.
Patch set overview:
Patch #1 is a fix for a bug introduced in previous submission. Detected
by Coverity.
Patches #2 and #3 are preparations.
Patch #4 tracks the VRs a nexthop group is member of.
Patch #5 uses the membership tracking from the previous patch to issue
one update request per each VR.
====================
Link: https://lore.kernel.org/r/20201125193505.1052466-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Wed, 25 Nov 2020 19:35:05 +0000 (21:35 +0200)]
mlxsw: spectrum_router: Update adjacency index more efficiently
The device supports an operation that allows the driver to issue one
request to update the adjacency index for all the routes in a given
virtual router (VR) from old index and size to new ones. This is useful
in case the configuration of a certain nexthop group is updated and its
adjacency index changes.
Currently, the driver does not use this operation in an efficient
manner. It iterates over all the routes using the nexthop group and
issues an update request for the VR if it is not the same as the
previous VR.
Instead, use the VR tracking added in the previous patch to update the
adjacency index once for each VR currently using the nexthop group.
Example:
8k IPv6 routes were added in an alternating manner to two VRFs. All the
routes are using the same nexthop object ('nhid 1').
Before:
# perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
16,385 devlink:devlink_hwmsg
4.
255933213 seconds time elapsed
0.
000000000 seconds user
0.
666923000 seconds sys
Number of EMAD transactions corresponds to number of routes using the
nexthop group.
After:
# perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
3 devlink:devlink_hwmsg
0.
077655094 seconds time elapsed
0.
000000000 seconds user
0.
076698000 seconds sys
Number of EMAD transactions corresponds to number of VRFs / VRs.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Wed, 25 Nov 2020 19:35:04 +0000 (21:35 +0200)]
mlxsw: spectrum_router: Track nexthop group virtual router membership
For each nexthop group, track in which virtual routers (VRs) the group is
used. This is going to be used by the next patch to perform a more
efficient adjacency index update whenever the group's adjacency index
changes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Wed, 25 Nov 2020 19:35:03 +0000 (21:35 +0200)]
mlxsw: spectrum_router: Rollback virtual router adjacency pointer update
In the rare case where the adjacency pointer cannot be updated for a
given virtual router, rollback the operation so that virtual routers
that are already using the new index will use the old one again.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Wed, 25 Nov 2020 19:35:02 +0000 (21:35 +0200)]
mlxsw: spectrum_router: Pass virtual router parameters directly instead of pointer
mlxsw_sp_adj_index_mass_update_vr() only needs the virtual router's
identifier and protocol, so pass them directly. In a subsequent patch
the caller will not have access to the pointer.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Wed, 25 Nov 2020 19:35:01 +0000 (21:35 +0200)]
mlxsw: spectrum_router: Fix error handling issue
Return error to the caller instead of suppressing it.
Fixes:
e3ddfb45bacd ("mlxsw: spectrum_router: Allow returning errors from mlxsw_sp_nexthop_group_refresh()")
Addresses-Coverity: ("Error handling issues (CHECKED_RETURN)")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 23:00:35 +0000 (15:00 -0800)]
Merge tag 'asm-generic-fixes-5.10-2' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures"
* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Linus Torvalds [Fri, 27 Nov 2020 22:48:03 +0000 (14:48 -0800)]
Merge tag 'arm-soc-fixes-v5.10-3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
Linus Torvalds [Fri, 27 Nov 2020 22:38:02 +0000 (14:38 -0800)]
Merge tag 'net-5.10-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
and CAN subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection of
congestion control
- tcp: fix race condition when creating child sockets from syncookies
on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible hard
header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing struct
slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats uAPI
before it's released"
* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
ch_ktls: lock is not freed
net/tls: Protect from calling tls_dev_del for TLS RX twice
devlink: Make sure devlink instance and port are in same net namespace
devlink: Hold rtnl lock while reading netdev attributes
ptp: clockmatrix: bug fix for idtcm_strverscmp
enetc: Let the hardware auto-advance the taprio base-time of 0
gro_cells: reduce number of synchronize_net() calls
net: stmmac: fix incorrect merge of patch upstream
ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
Documentation: netdev-FAQ: suggest how to post co-dependent series
ibmvnic: enhance resetting status check during module exit
...
Jakub Kicinski [Fri, 27 Nov 2020 22:36:04 +0000 (14:36 -0800)]
Merge branch 'net-sched-fix-over-mtu-packet-of-defrag-in'
wenxu says:
====================
net/sched: fix over mtu packet of defrag in
Currently kernel tc subsystem can do conntrack in act_ct. But when several
fragment packets go through the act_ct, function tcf_ct_handle_fragments
will defrag the packets to a big one. But the last action will redirect
mirred to a device which maybe lead the reassembly big packet over the mtu
of target device.
The first patch fix miss init the qdisc_skb_cb->mru
The send one refactor the hanle of xmit in act_mirred and prepare for the
third one
The last one add implict packet fragment support to fix the over mtu for
defrag in act_ct.
====================
Link: https://lore.kernel.org/r/1606276883-6825-1-git-send-email-wenxu@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wenxu [Wed, 25 Nov 2020 04:01:23 +0000 (12:01 +0800)]
net/sched: sch_frag: add generic packet fragment support.
Currently kernel tc subsystem can do conntrack in cat_ct. But when several
fragment packets go through the act_ct, function tcf_ct_handle_fragments
will defrag the packets to a big one. But the last action will redirect
mirred to a device which maybe lead the reassembly big packet over the mtu
of target device.
This patch add support for a xmit hook to mirred, that gets executed before
xmiting the packet. Then, when act_ct gets loaded, it configs that hook.
The frag xmit hook maybe reused by other modules.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wenxu [Wed, 25 Nov 2020 04:01:22 +0000 (12:01 +0800)]
net/sched: act_mirred: refactor the handle of xmit
This one is prepare for the next patch.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wenxu [Wed, 25 Nov 2020 04:01:21 +0000 (12:01 +0800)]
net/sched: fix miss init the mru in qdisc_skb_cb
The mru in the qdisc_skb_cb should be init as 0. Only defrag packets in the
act_ct will set the value.
Fixes:
038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 27 Nov 2020 22:32:40 +0000 (14:32 -0800)]
Merge branch 'add-chacha20-poly1305-cipher-to-kernel-tls'
Vadim Fedorenko says:
====================
Add CHACHA20-POLY1305 cipher to Kernel TLS
RFC 7905 defines usage of ChaCha20-Poly1305 in TLS connections. This
cipher is widely used nowadays and it's good to have a support for it
in TLS connections in kernel.
====================
Link: https://lore.kernel.org/r/1606231490-653-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Tue, 24 Nov 2020 15:24:50 +0000 (18:24 +0300)]
selftests/tls: add CHACHA20-POLY1305 to tls selftests
Add new cipher as a variant of standard tls selftests
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Tue, 24 Nov 2020 15:24:49 +0000 (18:24 +0300)]
net/tls: add CHACHA20-POLY1305 configuration
Add ChaCha-Poly specific configuration code.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Tue, 24 Nov 2020 15:24:48 +0000 (18:24 +0300)]
net/tls: add CHACHA20-POLY1305 specific behavior
RFC 7905 defines special behavior for ChaCha-Poly TLS sessions.
The differences are in the calculation of nonce and the absence
of explicit IV. This behavior is like TLSv1.3 partly.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Tue, 24 Nov 2020 15:24:47 +0000 (18:24 +0300)]
net/tls: add CHACHA20-POLY1305 specific defines and structures
To provide support for ChaCha-Poly cipher we need to define
specific constants and structures.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko [Tue, 24 Nov 2020 15:24:46 +0000 (18:24 +0300)]
net/tls: make inline helpers protocol-aware
Inline functions defined in tls.h have a lot of AES-specific
constants. Remove these constants and change argument to struct
tls_prot_info to have an access to cipher type in later patches
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-rpi.git / log