drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx

[ Upstream commit 7538f80ae0d98bf51eb89eee5344aec219902d42 ]

Remove loops over hw_vbif. Instead always VBIF's idx as an index in the
array. This fixes an error in dpu_kms_hw_init(), where we fill
dpu_kms->hw_vbif[i], but check for an error pointer at
dpu_kms->hw_vbif[vbif_idx].

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/489569/
Link: https://lore.kernel.org/r/20220615125703.24647-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API

[ Upstream commit bfb735a3ceff0bab6473bac275da96f9b2a06dec ]

In eukrea_tlv320_probe(), we need to hold the reference returned
from of_find_compatible_node() which has increased the refcount
and then call of_node_put() with it when done.

Fixes: 66f232908de2 ("ASoC: eukrea-tlv320: Add DT support.")
Co-authored-by: Kelin Wang <wangkelin2023@163.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()

[ Upstream commit 5cbedf52608cc3cbc1c2a9a861fb671620427a20 ]

If clk_prepare_enable() fails, there is no point in calling
clk_disable_unprepare() in the error handling path.

Move the out_clk label at the right place.

Fixes: b6507596dfd6 ("MIPS: Alchemy: au1xmmc: use clk framework")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/21d99886d07fa7fcbec74992657dabad98c935c4.1661412818.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix memory leak in hpd_rx_irq_create_workqueue()

[ Upstream commit 7136f956c73c4ba50bfeb61653dfd6a9669ea915 ]

If construction of the array of work queues to handle hpd_rx_irq offload
work fails, we need to unwind. Destroy all the created workqueues and
the allocated memory for the hpd_rx_irq_offload_work_queue struct array.

Fixes: 8e794421bc98 ("drm/amd/display: Fork thread to offload work of hpd_rx_irq")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/omap: dss: Fix refcount leak bugs

[ Upstream commit 8b42057e62120813ebe9274f508fa785b7cab33a ]

In dss_init_ports() and __dss_uninit_ports(), we should call
of_node_put() for the reference returned by of_graph_get_port_by_id()
in fail path or when it is not used anymore.

Fixes: 09bffa6e5192 ("drm: omap: use common OF graph helpers")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722144348.1306569-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bochs: fix blanking

[ Upstream commit e740ceb53e4579a7a4063712cebecac3c343b189 ]

VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome
mode, note C vs. M at the end).  So when using VGA_IS1_RC make sure the
vga device is actually in color mode and set the corresponding bit in the
misc register.

Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2
fix is on the way too).  Doesn't happen in BIOS mode because in that
case the vgabios already flips the bit.

Fixes: 250e743915d4 ("drm/bochs: Add screen blanking support")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: beep: Simplify keep-power-at-enable behavior

[ Upstream commit 4c8d695cb9bc5f6fd298a586602947b2fc099a64 ]

The recent fix for IDT codecs to keep the power up while the beep is
enabled can be better integrated into the beep helper code.
This patch cleans up the code with refactoring.

Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Link: https://lore.kernel.org/r/20220906092306.26183-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rsnd: Add check for rsnd_mod_power_on

[ Upstream commit 376be51caf8871419bbcbb755e1e615d30dc3153 ]

As rsnd_mod_power_on() can return negative numbers,
it should be better to check the return value and
deal with the exception.

Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220902013030.3691266-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: megachips: Fix a null pointer dereference bug

[ Upstream commit 1ff673333d46d2c1b053ebd0c1c7c7c79e36943e ]

When removing the module we will get the following warning:

[   31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[   31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[   31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[   31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[   31.921825] Call Trace:
[   31.922533]  stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[   31.923139]  i2c_device_remove+0x181/0x1f0

The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.

Fix this by checking whether both the bridges are probed.

Fixes: 11632d4aa2b3 ("drm/bridge: megachips: Ensure both bridges are probed before registration")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: add missing pci_disable_device() in amdgpu_pmops_runtime_resume()

[ Upstream commit 6b11af6d1c8f5d4135332bb932baaa06e511173d ]

Add missing pci_disable_device() if amdgpu_device_resume() fails.

Fixes: 8e4d5d43cc6c ("drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_typec: Correct alt mode index

[ Upstream commit 4e477663e396f48c5cfc5f2d75d4b514f409516a ]

Alt mode indices used by USB PD (Power Delivery) start with 1, not 0.

Update the alt mdoe registration code to factor this in to the alt mode
descriptor.

Fixes: de0f49487db3 ("platform/chrome: cros_ec_typec: Register partner altmodes")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220819190807.1275937-3-pmalani@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: msi-laptop: Fix resource cleanup

[ Upstream commit 5523632aa10f906dfe2eb714ee748590dc7fc6b1 ]

Fix the input-device not getting free-ed on probe-errors and
fix the msi_touchpad_dwork not getting cancelled on neither
probe-errors nor on remove.

Fixes: 143a4c0284dc ("msi-laptop: send out touchpad on/off key")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: msi-laptop: Fix old-ec check for backlight registering

[ Upstream commit 83ac7a1c2ed5f17caa07cbbc84bad3c05dc3bf22 ]

Commit 2cc6c717799f ("msi-laptop: Port to new backlight interface
selection API") replaced this check:

if (!quirks->old_ec_model || acpi_video_backlight_support())
pr_info("Brightness ignored, ...");
else
do_register();

With:

if (quirks->old_ec_model ||
    acpi_video_get_backlight_type() == acpi_backlight_vendor)
do_register();

But since the do_register() part was part of the else branch, the entire
condition should be inverted.  So not only the 2 statements on either
side of the || should be inverted, but the || itself should be replaced
with a &&.

In practice this has likely not been an issue because the new-ec models
(old_ec_model==false) likely all support ACPI video backlight control,
making acpi_video_get_backlight_type() return acpi_backlight_video
turning the second part of the || also false when old_ec_model == false.

Fixes: 2cc6c717799f ("msi-laptop: Port to new backlight interface selection API")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2764: Fix mute/unmute

[ Upstream commit f5ad67f13623548e5aff847f89700c178aaf2a98 ]

Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.

(This mirrors commit 1e5907bcb3a3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)

Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2764: Drop conflicting set_bias_level power setting

[ Upstream commit 09273f38832406db19a8907a934687cc10660a6b ]

The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.

(This mirrors commit c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)

Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2764: Allow mono streams

[ Upstream commit 23204d928a27146d13e11c9383632775345ecca8 ]

The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.

(This mirrors commit bf54d97a835d ("ASoC: tas2770: Allow mono streams")
which was a fix to the tas2770 driver.)

Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: fix memory corruption in ioctl

[ Upstream commit 8a07b45fd3c2dda24fad43639be5335a4595196a ]

If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption.

Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yv8dpCFZJdbUT5ye@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: fix double-free in chromeos_laptop_prepare()

[ Upstream commit 6ad4194d6a1e1d11b285989cd648ef695b4a93c0 ]

If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8bf ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mt6359: fix tests for platform_get_irq() failure

[ Upstream commit 51eea3a6fb4d39c2cc71824e6eee5949d7ae4d1c ]

The platform_get_irq() returns negative error codes.  It can't actually
return zero, but if it did that should be treated as success.

Fixes: eef07b9e0925 ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YvThhr86N3qQM2EO@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()

[ Upstream commit e0686dc6f2252e009c455fe99e2ce9d62a60eb47 ]

The reference 'child' in the iteration of for_each_available_child_of_node()
is only escaped out into a local variable which is only used to check
its value. So we still need to the of_node_put() when breaking of the
for_each_available_child_of_node() which will automatically increase
and decrease the refcount.

Fixes: ca454bd42dc2 ("drm/pl111: Support the Versatile Express")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711131550.361350-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/dp_mst: fix drm_dp_dpcd_read return value checks

[ Upstream commit 2ac6cdd581f48c8f68747156fde5868486a44985 ]

drm_dp_dpcd_read returns the number of bytes read. The previous code
would print garbage on DPCD error, and would exit with on error on
success.

Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/473500/
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: parade-ps8640: Fix regulator supply order

[ Upstream commit fc94224c2e0ae8d83ac511a3ef4962178505469d ]

The datasheet says that VDD12 must be enabled and at full voltage before
VDD33 is enabled.

Reorder the bulk regulator supply names so that VDD12 is enabled before
VDD33. Any enable ramp delays should be handled by setting proper
constraints on the regulators.

Fixes: bc1aee7fc8f0 ("drm/bridge: Add I2C based driver for ps8640 bridge")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721092258.3397461-1-wenst@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: Correct drm_gem_shmem_get_sg_table() error handling

[ Upstream commit 64b88afbd92fbf434759d1896a7cf705e1c00e79 ]

Previous commit fixed checking of the ERR_PTR value returned by
drm_gem_shmem_get_sg_table(), but it missed to zero out the shmem->pages,
which will crash virtio_gpu_cleanup_object(). Add the missing zeroing of
the shmem->pages.

Fixes: c24968734abf ("drm/virtio: Fix NULL vs IS_ERR checking in virtio_gpu_object_shmem_init")
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-2-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mipi-dsi: Detach devices when removing the host

[ Upstream commit 668a8f17b5290d04ef7343636a5588a0692731a1 ]

Whenever the MIPI-DSI host is unregistered, the code of
mipi_dsi_host_unregister() loops over every device currently found on that
bus and will unregister it.

However, it doesn't detach it from the bus first, which leads to all kind
of resource leaks if the host wants to perform some clean up whenever a
device is detached.

Fixes: 068a00233969 ("drm: Add MIPI DSI bus support")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: Avoid uninitialized variable warning

[ Upstream commit 7d1202738efda60155d98b370b3c70d336be0eea ]

This code works, but technically it uses "num_in_bus_fmts" before it
has been initialized so it leads to static checker warnings and probably
KMEMsan warnings at run time.  Initialize the variable to zero to
silence the warning.

Fixes: f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/YrrIs3hoGcPVmXc5@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: bridge: adv7511: unregister cec i2c device after cec adapter

[ Upstream commit 40cdb02cb9f965732eb543d47f15bef8d10f0f5f ]

cec_unregister_adapter() assumes that the underlying adapter ops are
callable. For example, if the CEC adapter currently has a valid physical
address, then the unregistration procedure will invalidate the physical
address by setting it to f.f.f.f. Whence the following kernel oops
observed after removing the adv7511 module:

    Unable to handle kernel execution of user memory at virtual address 0000000000000000
    Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP
    Call trace:
     0x0
     adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511]
     cec_adap_unconfigure+0x44/0x90 [cec]
     __cec_s_phys_addr.part.0+0x68/0x230 [cec]
     __cec_s_phys_addr+0x40/0x50 [cec]
     cec_unregister_adapter+0xb4/0x118 [cec]
     adv7511_remove+0x60/0x90 [adv7511]
     i2c_device_remove+0x34/0xe0
     device_release_driver_internal+0x114/0x1f0
     driver_detach+0x54/0xe0
     bus_remove_driver+0x60/0xd8
     driver_unregister+0x34/0x60
     i2c_del_driver+0x2c/0x68
     adv7511_exit+0x1c/0x67c [adv7511]
     __arm64_sys_delete_module+0x154/0x288
     invoke_syscall+0x48/0x100
     el0_svc_common.constprop.0+0x48/0xe8
     do_el0_svc+0x28/0x88
     el0_svc+0x1c/0x50
     el0t_64_sync_handler+0xa8/0xb0
     el0t_64_sync+0x15c/0x160
    Code: bad PC value
    ---[ end trace 0000000000000000 ]---

Protect against this scenario by unregistering i2c_cec after
unregistering the CEC adapter. Duly disable the CEC clock afterwards
too.

Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-3-alvin@pqrs.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: bridge: adv7511: fix CEC power down control register offset

[ Upstream commit 1d22b6033ea113a4c3850dfa2c0770885c81aec8 ]

The ADV7511_REG_CEC_CTRL = 0xE2 register is part of the main register
map - not the CEC register map. As such, we shouldn't apply an offset to
the register address. Doing so will cause us to address a bogus register
for chips with a CEC register map offset (e.g. ADV7533).

Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-2-alvin@pqrs.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvpp2: fix mvpp2 debugfs leak

[ Upstream commit 0152dfee235e87660f52a117fc9f70dc55956bb4 ]

When mvpp2 is unloaded, the driver specific debugfs directory is not
removed, which technically leads to a memory leak. However, this
directory is only created when the first device is probed, so the
hardware is present. Removing the module is only something a developer
would to when e.g. testing out changes, so the module would be
reloaded. So this memory leak is minor.

The original attempt in commit fe2c9c61f668 ("net: mvpp2: debugfs: fix
memory leak when using debugfs_lookup()") that was labelled as a memory
leak fix was not, it fixed a refcount leak, but in doing so created a
problem when the module is reloaded - the directory already exists, but
mvpp2_root is NULL, so we lose all debugfs entries. This fix has been
reverted.

This is the alternative fix, where we remove the offending directory
whenever the driver is unloaded.

Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/E1ofOAB-00CzkG-UO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

once: add DO_ONCE_SLOW() for sleepable contexts

[ Upstream commit 62c07983bef9d3e78e71189441e1a470f0d1e653 ]

Christophe Leroy reported a ~80ms latency spike
happening at first TCP connect() time.

This is because __inet_hash_connect() uses get_random_once()
to populate a perturbation table which became quite big
after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")

get_random_once() uses DO_ONCE(), which block hard irqs for the duration
of the operation.

This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock
for operations where we prefer to stay in process context.

Then __inet_hash_connect() can use get_random_slow_once()
to populate its perturbation table.

Fixes: 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")
Fixes: 190cc82489f4 ("tcp: change source port randomizarion at connect() time")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ieee802154: reject zero-sized raw_sendmsg()

[ Upstream commit 3a4d061c699bd3eedc80dc97a4b2a2e1af83c6f5 ]

syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154
socket. What commit dc633700f00f726e ("net/af_packet: check len when
min_header_len equals to 0") does also applies to ieee802154 socket.

Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: iosm: Call mutex_init before locking it

[ Upstream commit ba0fbdb95da5ddd8db457ce6ba09d16dd979a294 ]

wwan_register_ops calls wwan_create_default_link, which ends up in the
ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this
mutex is not yet initialized by that point. Fix it by moving mutex_init
above the wwan_register_ops call. This also makes the order of
operations in ipc_wwan_init symmetric to ipc_wwan_deinit.

Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnx2x: fix potential memory leak in bnx2x_tpa_stop()

[ Upstream commit b43f9acbb8942b05252be83ac25a81cec70cc192 ]

bnx2x_tpa_stop() allocates a memory chunk from new_data with
bnx2x_frag_alloc(). The new_data should be freed when gets some error.
But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns
without releasing the new_data, which will lead to a memory leak.

We should free the new_data with bnx2x_frag_free() when "pad + len >
fp->rx_buf_size" is true.

Fixes: 07b0f00964def8af9321cfd6c4a7e84f6362f728 ("bnx2x: fix possible panic under memory stress")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks()

[ Upstream commit a91b750fd6629354460282bbf5146c01b05c4859 ]

syzbot is reporting lockdep warning at rds_tcp_reset_callbacks() [1], for
commit ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in
rds_tcp_reset_callbacks()") added cancel_delayed_work_sync() into a section
protected by lock_sock() without realizing that rds_send_xmit() might call
lock_sock().

We don't need to protect cancel_delayed_work_sync() using lock_sock(), for
even if rds_{send,recv}_worker() re-queued this work while __flush_work()
 from cancel_delayed_work_sync() was waiting for this work to complete,
retried rds_{send,recv}_worker() is no-op due to the absence of RDS_CONN_UP
bit.

Link: https://syzkaller.appspot.com/bug?extid=78c55c7bc6f66e53dce2
Reported-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Fixes: ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller

[ Upstream commit 525dd5aed67a2f4f7278116fb92a24e6a53e2622 ]

Fix scale factors for reading MPS Multi-phase mp2888 controller.
Fixed sensors:
    - PIN/POUT: based on vendor documentation, set bscale factor 0.5W/LSB
    - IOUT: based on vendor documentation, set scale factor 0.25 A/LSB

Fixes: e4db7719d037 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controller")
Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220929121642.63051-1-oleksandrs@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Ensure that sg_table won't be used after being freed

[ Upstream commit 8e9204cddcc3fea9affcfa411715ba4f66e97587 ]

SPI code checks for non-zero sgt->orig_nents to determine if the buffer
has been DMA-mapped. Ensure that sg_table is really zeroed after free to
avoid potential NULL pointer dereference if the given SPI xfer object is
reused again without being DMA-mapped.

Fixes: 0c17ba73c08f ("spi: Fix cache corruption due to DMA/PIO overlap")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220930113408.19720-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited

[ Upstream commit f4ce91ce12a7c6ead19b128ffa8cff6e3ded2a14 ]

This commit fixes a bug in the tracking of max_packets_out and
is_cwnd_limited. This bug can cause the connection to fail to remember
that is_cwnd_limited is true, causing the connection to fail to grow
cwnd when it should, causing throughput to be lower than it should be.

The following event sequence is an example that triggers the bug:

 (a) The connection is cwnd_limited, but packets_out is not at its
     peak due to TSO deferral deciding not to send another skb yet.
     In such cases the connection can advance max_packets_seq and set
     tp->is_cwnd_limited to true and max_packets_out to a small
     number.

(b) Then later in the round trip the connection is pacing-limited (not
     cwnd-limited), and packets_out is larger. In such cases the
     connection would raise max_packets_out to a bigger number but
     (unexpectedly) flip tp->is_cwnd_limited from true to false.

This commit fixes that bug.

One straightforward fix would be to separately track (a) the next
window after max_packets_out reaches a maximum, and (b) the next
window after tp->is_cwnd_limited is set to true. But this would
require consuming an extra u32 sequence number.

Instead, to save space we track only the most important
information. Specifically, we track the strongest available signal of
the degree to which the cwnd is fully utilized:

(1) If the connection is cwnd-limited then we remember that fact for
the current window.

(2) If the connection not cwnd-limited then we track the maximum
number of outstanding packets in the current window.

In particular, note that the new logic cannot trigger the buggy
(a)/(b) sequence above because with the new logic a condition where
tp->packets_out > tp->max_packets_out can only trigger an update of
tp->is_cwnd_limited if tp->is_cwnd_limited is false.

This first showed up in a testing of a BBRv2 dev branch, but this
buggy behavior highlighted a general issue with the
tcp_cwnd_validate() logic that can cause cwnd to fail to increase at
the proper rate for any TCP congestion control, including Reno or
CUBIC.

Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: handle the error returned from sctp_auth_asoc_init_active_key

[ Upstream commit 022152aaebe116a25c39818a07e175a8cd3c1e11 ]

When it returns an error from sctp_auth_asoc_init_active_key(), the
active_key is actually not updated. The old sh_key will be freeed
while it's still used as active key in asoc. Then an use-after-free
will be triggered when sending patckets, as found by syzbot:

  sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
  sctp_set_owner_w net/sctp/socket.c:132 [inline]
  sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863
  sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025
  inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
  sock_sendmsg_nosec net/socket.c:714 [inline]
  sock_sendmsg+0xcf/0x120 net/socket.c:734

This patch is to fix it by not replacing the sh_key when it returns
errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key().
For sctp_auth_set_active_key(), old active_key_id will be set back
to asoc->active_key_id when the same thing happens.

Fixes: 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: syzbot+a236dd8e9622ed8954a3@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mISDN: fix use-after-free bugs in l1oip timer handlers

[ Upstream commit 2568a7e0832ee30b0a351016d03062ab4e0e0a3f ]

The l1oip_cleanup() traverses the l1oip_ilist and calls
release_card() to cleanup module and stack. However,
release_card() calls del_timer() to delete the timers
such as keep_tl and timeout_tl. If the timer handler is
running, the del_timer() will not stop it and result in
UAF bugs. One of the processes is shown below:

    (cleanup routine)          |        (timer handler)
release_card()                 | l1oip_timeout()
 ...                           |
 del_timer()                   | ...
 ...                           |
 kfree(hc) //FREE              |
                               | hc->timeout_on = 0 //USE

Fix by calling del_timer_sync() in release_card(), which
makes sure the timer handlers have finished before the
resources, such as l1oip and so on, have been deallocated.

What's more, the hc->workq and hc->socket_thread can kick
those timers right back in. We add a bool flag to show
if card is released. Then, check this flag in hc->workq
and hc->socket_thread.

Fixes: 3712b42d4b1b ("Add layer1 over IP support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eth: alx: take rtnl_lock on resume

[ Upstream commit 6ad1c94e1e7e374d88f0cfd77936dddb8339aaba ]

Zbynek reports that alx trips an rtnl assertion on resume:

 RTNL: assertion failed at net/core/dev.c (2891)
 RIP: 0010:netif_set_real_num_tx_queues+0x1ac/0x1c0
 Call Trace:
  <TASK>
  __alx_open+0x230/0x570 [alx]
  alx_resume+0x54/0x80 [alx]
  ? pci_legacy_resume+0x80/0x80
  dpm_run_callback+0x4a/0x150
  device_resume+0x8b/0x190
  async_resume+0x19/0x30
  async_run_entry_fn+0x30/0x130
  process_one_work+0x1e5/0x3b0

indeed the driver does not hold rtnl_lock during its internal close
and re-open functions during suspend/resume. Note that this is not
a huge bug as the driver implements its own locking, and does not
implement changing the number of queues, but we need to silence
the splat.

Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL")
Reported-and-tested-by: Zbynek Michl <zbynek.michl@gmail.com>
Reviewed-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220928181236.1053043-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost/vsock: Use kvmalloc/kvfree for larger packets.

[ Upstream commit 0e3f72931fc47bb81686020cc643cde5d9cd0bb8 ]

When copying a large file over sftp over vsock, data size is usually 32kB,
and kmalloc seems to fail to try to allocate 32 32kB regions.

 vhost-5837: page allocation failure: order:4, mode:0x24040c0
 Call Trace:
  [<ffffffffb6a0df64>] dump_stack+0x97/0xdb
  [<ffffffffb68d6aed>] warn_alloc_failed+0x10f/0x138
  [<ffffffffb68d868a>] ? __alloc_pages_direct_compact+0x38/0xc8
  [<ffffffffb664619f>] __alloc_pages_nodemask+0x84c/0x90d
  [<ffffffffb6646e56>] alloc_kmem_pages+0x17/0x19
  [<ffffffffb6653a26>] kmalloc_order_trace+0x2b/0xdb
  [<ffffffffb66682f3>] __kmalloc+0x177/0x1f7
  [<ffffffffb66e0d94>] ? copy_from_iter+0x8d/0x31d
  [<ffffffffc0689ab7>] vhost_vsock_handle_tx_kick+0x1fa/0x301 [vhost_vsock]
  [<ffffffffc06828d9>] vhost_worker+0xf7/0x157 [vhost]
  [<ffffffffb683ddce>] kthread+0xfd/0x105
  [<ffffffffc06827e2>] ? vhost_dev_set_owner+0x22e/0x22e [vhost]
  [<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
  [<ffffffffb6eb332e>] ret_from_fork+0x4e/0x80
  [<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3

Work around by doing kvmalloc instead.

Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Junichi Uekawa <uekawa@chromium.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220928064538.667678-1-uekawa@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM

[ Upstream commit 5574d3290449916397f3092dcd2bac92415498e1 ]

ieee80211_tx_queue_params.aifs is not supposed to be written directly
to the REG_EDCA_*_PARAM registers. Instead process it like the vendor
drivers do. It's kinda hacky but it works.

This change boosts the download speed and makes it more stable.

Tested with RTL8188FU but all the other supported chips should also
benefit.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/038cc03f-3567-77ba-a7bd-c4930e3b2fad@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: s3c64xx: Fix large transfers with DMA

[ Upstream commit 1224e29572f655facfcd850cf0f0a4784f36a903 ]

The COUNT_VALUE in the PACKET_CNT register is 16-bit so the maximum
value is 65535.  Asking the driver to transfer a larger size currently
leads to the DMA transfer timing out.  Implement ->max_transfer_size()
and have the core split the transfer as needed.

Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220927112117.77599-5-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_fib: Fix for rpath check with VRF devices

[ Upstream commit 2a8a7c0eaa8747c16aa4a48d573aa920d5c00a5c ]

Analogous to commit b575b24b8eee3 ("netfilter: Fix rpfilter
dropping vrf packets by mistake") but for nftables fib expression:
Add special treatment of VRF devices so that typical reverse path
filtering via 'fib saddr . iif oif' expression works as expected.

Fixes: f6d0cbcf09c50 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Reinject transport-mode packets through workqueue

[ Upstream commit 4f4920669d21e1060b7243e5118dc3b71ced1276 ]

The following warning is displayed when the tcp6-multi-diffip11 stress
test case of the LTP test suite is tested:

watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ns-tcpserver:48198]
CPU: 0 PID: 48198 Comm: ns-tcpserver Kdump: loaded Not tainted 6.0.0-rc6+ #39
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : des3_ede_encrypt+0x27c/0x460 [libdes]
lr : 0x3f
sp : ffff80000ceaa1b0
x29: ffff80000ceaa1b0 x28: ffff0000df056100 x27: ffff0000e51e5280
x26: ffff80004df75030 x25: ffff0000e51e4600 x24: 000000000000003b
x23: 0000000000802080 x22: 000000000000003d x21: 0000000000000038
x20: 0000000080000020 x19: 000000000000000a x18: 0000000000000033
x17: ffff0000e51e4780 x16: ffff80004e2d1448 x15: ffff80004e2d1248
x14: ffff0000e51e4680 x13: ffff80004e2d1348 x12: ffff80004e2d1548
x11: ffff80004e2d1848 x10: ffff80004e2d1648 x9 : ffff80004e2d1748
x8 : ffff80004e2d1948 x7 : 000000000bcaf83d x6 : 000000000000001b
x5 : ffff80004e2d1048 x4 : 00000000761bf3bf x3 : 000000007f1dd0a3
x2 : ffff0000e51e4780 x1 : ffff0000e3b9a2f8 x0 : 00000000db44e872
Call trace:
 des3_ede_encrypt+0x27c/0x460 [libdes]
 crypto_des3_ede_encrypt+0x1c/0x30 [des_generic]
 crypto_cbc_encrypt+0x148/0x190
 crypto_skcipher_encrypt+0x2c/0x40
 crypto_authenc_encrypt+0xc8/0xfc [authenc]
 crypto_aead_encrypt+0x2c/0x40
 echainiv_encrypt+0x144/0x1a0 [echainiv]
 crypto_aead_encrypt+0x2c/0x40
 esp6_output_tail+0x1c8/0x5d0 [esp6]
 esp6_output+0x120/0x278 [esp6]
 xfrm_output_one+0x458/0x4ec
 xfrm_output_resume+0x6c/0x1f0
 xfrm_output+0xac/0x4ac
 __xfrm6_output+0x130/0x270
 xfrm6_output+0x60/0xec
 ip6_xmit+0x2ec/0x5bc
 inet6_csk_xmit+0xbc/0x10c
 __tcp_transmit_skb+0x460/0x8c0
 tcp_write_xmit+0x348/0x890
 __tcp_push_pending_frames+0x44/0x110
 tcp_rcv_established+0x3c8/0x720
 tcp_v6_do_rcv+0xdc/0x4a0
 tcp_v6_rcv+0xc24/0xcb0
 ip6_protocol_deliver_rcu+0xf0/0x574
 ip6_input_finish+0x48/0x7c
 ip6_input+0x48/0xc0
 ip6_rcv_finish+0x80/0x9c
 xfrm_trans_reinject+0xb0/0xf4
 tasklet_action_common.constprop.0+0xf8/0x134
 tasklet_action+0x30/0x3c
 __do_softirq+0x128/0x368
 do_softirq+0xb4/0xc0
 __local_bh_enable_ip+0xb0/0xb4
 put_cpu_fpsimd_context+0x40/0x70
 kernel_neon_end+0x20/0x40
 sha1_base_do_update.constprop.0.isra.0+0x11c/0x140 [sha1_ce]
 sha1_ce_finup+0x94/0x110 [sha1_ce]
 crypto_shash_finup+0x34/0xc0
 hmac_finup+0x48/0xe0
 crypto_shash_finup+0x34/0xc0
 shash_digest_unaligned+0x74/0x90
 crypto_shash_digest+0x4c/0x9c
 shash_ahash_digest+0xc8/0xf0
 shash_async_digest+0x28/0x34
 crypto_ahash_digest+0x48/0xcc
 crypto_authenc_genicv+0x88/0xcc [authenc]
 crypto_authenc_encrypt+0xd8/0xfc [authenc]
 crypto_aead_encrypt+0x2c/0x40
 echainiv_encrypt+0x144/0x1a0 [echainiv]
 crypto_aead_encrypt+0x2c/0x40
 esp6_output_tail+0x1c8/0x5d0 [esp6]
 esp6_output+0x120/0x278 [esp6]
 xfrm_output_one+0x458/0x4ec
 xfrm_output_resume+0x6c/0x1f0
 xfrm_output+0xac/0x4ac
 __xfrm6_output+0x130/0x270
 xfrm6_output+0x60/0xec
 ip6_xmit+0x2ec/0x5bc
 inet6_csk_xmit+0xbc/0x10c
 __tcp_transmit_skb+0x460/0x8c0
 tcp_write_xmit+0x348/0x890
 __tcp_push_pending_frames+0x44/0x110
 tcp_push+0xb4/0x14c
 tcp_sendmsg_locked+0x71c/0xb64
 tcp_sendmsg+0x40/0x6c
 inet6_sendmsg+0x4c/0x80
 sock_sendmsg+0x5c/0x6c
 __sys_sendto+0x128/0x15c
 __arm64_sys_sendto+0x30/0x40
 invoke_syscall+0x50/0x120
 el0_svc_common.constprop.0+0x170/0x194
 do_el0_svc+0x38/0x4c
 el0_svc+0x28/0xe0
 el0t_64_sync_handler+0xbc/0x13c
 el0t_64_sync+0x180/0x184

Get softirq info by bcc tool:
./softirqs -NT 10
Tracing soft irq event time... Hit Ctrl-C to end.

15:34:34
SOFTIRQ          TOTAL_nsecs
block                 158990
timer               20030920
sched               46577080
net_rx             676746820
tasklet           9906067650

15:34:45
SOFTIRQ          TOTAL_nsecs
block                  86100
sched               38849790
net_rx             676532470
timer             1163848790
tasklet           9409019620

15:34:55
SOFTIRQ          TOTAL_nsecs
sched               58078450
net_rx             475156720
timer              533832410
tasklet           9431333300

The tasklet software interrupt takes too much time. Therefore, the
xfrm_trans_reinject executor is changed from tasklet to workqueue. Add add
spin lock to protect the queue. This reduces the processing flow of the
tcp_sendmsg function in this scenario.

Fixes: acf568ee859f0 ("xfrm: Reinject transport-mode packets through tasklet")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_core: Fix not handling link timeouts propertly

[ Upstream commit 116523c8fac05d1d26f748fee7919a4ec5df67ea ]

Change that introduced the use of __check_timeout did not account for
link types properly, it always assumes ACL_LINK is used thus causing
hdev->acl_last_tx to be used even in case of LE_LINK and then again
uses ACL_LINK with hci_link_tx_to.

To fix this __check_timeout now takes the link type as parameter and
then procedure to use the right last_tx based on the link type and pass
it to hci_link_tx_to.

Fixes: 1b1d29e51499 ("Bluetooth: Make use of __check_timeout on hci_sched_le")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: David Beinder <david@beinder.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mlxbf: support lock mechanism

[ Upstream commit 86067ccfa1424a26491542d6f6d7546d40b61a10 ]

Linux is not the only entity using the BlueField I2C busses so
support a lock mechanism provided by hardware to avoid issues
when multiple entities are trying to access the same bus.

The lock is acquired whenever written explicitely or the lock
register is read. So make sure it is always released at the end
of a successful or failed transaction.

Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

skmsg: Schedule psock work if the cached skb exists on the psock

[ Upstream commit bec217197b412d74168c6a42fc0f76d0cc9cad00 ]

In sk_psock_backlog function, for ingress direction skb, if no new data
packet arrives after the skb is cached, the cached skb does not have a
chance to be added to the receive queue of psock. As a result, the cached
skb cannot be received by the upper-layer application. Fix this by reschedule
the psock work to dispose the cached skb in sk_msg_recvmsg function.

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220907071311.60534-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe

[ Upstream commit 29f65f2171c85a9633daa380df14009a365f42f2 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes:db91841b58f9a ("spi/omap100k: Convert to runtime PM")

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220924121310.78331-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe

[ Upstream commit 618d815fc93477b1675878f3c04ff32657cc18b4 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes:abf00907538e2 ("spi: dw: Add Baikal-T1 SPI Controller glue driver")

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220924121310.78331-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype

[ Upstream commit 30ea703a38ef76ca119673cd8bdd05c6e068e2ac ]

Include the header containing the prototype of init_ia32_feat_ctl(),
solving the following warning:

  $ make W=1 arch/x86/kernel/cpu/feat_ctl.o
  arch/x86/kernel/cpu/feat_ctl.c:112:6: warning: no previous prototype for ‘init_ia32_feat_ctl’ [-Wmissing-prototypes]
    112 | void init_ia32_feat_ctl(struct cpuinfo_x86 *c)

This warning appeared after commit

  5d5103595e9e5 ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")

had moved the function init_ia32_feat_ctl()'s prototype from
arch/x86/kernel/cpu/cpu.h to arch/x86/include/asm/cpu.h.

Note that, before the commit mentioned above, the header include "cpu.h"
(arch/x86/kernel/cpu/cpu.h) was added by commit

  0e79ad863df43 ("x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()")

solely to fix init_ia32_feat_ctl()'s missing prototype. So, the header
include "cpu.h" is no longer necessary.

  [ bp: Massage commit message. ]

Fixes: 5d5103595e9e5 ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
Signed-off-by: Luciano Leão <lucianorsleao@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220922200053.1357470-1-lucianorsleao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode/AMD: Track patch allocation size explicitly

[ Upstream commit 712f210a457d9c32414df246a72781550bc23ef6 ]

In preparation for reducing the use of ksize(), record the actual
allocation size for later memcpy(). This avoids copying extra
(uninitialized!) bytes into the patch buffer when the requested
allocation size isn't exactly the size of a kmalloc bucket.
Additionally, fix potential future issues where runtime bounds checking
will notice that the buffer was allocated to a smaller value than
returned by ksize().

Fixes: 757885e94a22 ("x86, microcode, amd: Early microcode patch loading support for AMD")
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/lkml/CA+DvKQ+bp7Y7gmaVhacjv9uF6Ar-o4tet872h4Q8RPYPJjcJQA@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: fix number of VHT beamformee spatial streams

[ Upstream commit 55b5ee3357d7bb98ee578cf9b84a652e7a1bc199 ]

The number of spatial streams used when acting as a beamformee in VHT
mode are reported by the firmware as 7 (8 sts - 1) both in IPQ6018 and
IPQ8074 which respectively have 2 and 4 sts each. So the firmware should
report 1 (2 - 1) and 3 (4 - 1).

Fix this by checking that the number of VHT beamformee sts reported by
the firmware is not greater than the number of receiving antennas - 1.
The fix is based on the same approach used in this same function for
sanitizing the number of sounding dimensions reported by the firmware.

Without this change, acting as a beamformee in VHT mode is not working
properly.

Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220616173947.21901-1-jesus.manzano@galgus.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: revisit the gc initial rescheduling bias

[ Upstream commit 2aa192757005f130b2dd3547dda6e462e761199f ]

The previous commit changed the way the rescheduling delay is computed
which has a side effect: the bias is now represented as much as the
other entries in the rescheduling delay which makes the logic to kick in
only with very large sets, as the initial interval is very large
(INT_MAX).

Revisit the GC initial bias to allow more frequent GC for smaller sets
while still avoiding wakeups when a machine is mostly idle. We're moving
from a large initial value to pretending we have 100 entries expiring at
the upper bound. This way only a few entries having a small timeout
won't impact much the rescheduling delay and non-idle machines will have
enough entries to lower the delay when needed. This also improves
readability as the initial bias is now linked to what is computed
instead of being an arbitrary large value.

Fixes: 2cfadb761d3d ("netfilter: conntrack: revisit gc autotuning")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: fix the gc rescheduling delay

[ Upstream commit 95eabdd207024312876d0ebed90b4c977e050e85 ]

Commit 2cfadb761d3d ("netfilter: conntrack: revisit gc autotuning")
changed the eviction rescheduling to the use average expiry of scanned
entries (within 1-60s) by doing:

  for (...) {
      expires = clamp(nf_ct_expires(tmp), ...);
      next_run += expires;
      next_run /= 2;
  }

The issue is the above will make the average ('next_run' here) more
dependent on the last expiration values than the firsts (for sets > 2).
Depending on the expiration values used to compute the average, the
result can be quite different than what's expected. To fix this we can
do the following:

  for (...) {
      expires = clamp(nf_ct_expires(tmp), ...);
      next_run += (expires - next_run) / ++count;
  }

Fixes: 2cfadb761d3d ("netfilter: conntrack: revisit gc autotuning")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure

[ Upstream commit 3124d320c22f3f4388d9ac5c8f37eaad0cefd6b1 ]

syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1],
for rcu_sync_enter() is called without rcu_sync_init() due to
hci_uart_tty_open() ignoring percpu_init_rwsem() failure.

While we are at it, fix that hci_uart_register_device() ignores
percpu_init_rwsem() failure and hci_uart_unregister_device() does not
call percpu_free_rwsem().

Link: https://syzkaller.appspot.com/bug?extid=576dfca25381fb6fbc5f
Reported-by: syzbot <syzbot+576dfca25381fb6fbc5f@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 67d2f8781b9f00d1 ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.")
Fixes: d73e172816652772 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Ensure correct locking around vulnerable function find_vpid()

[ Upstream commit 83c10cc362d91c0d8d25e60779ee52fdbbf3894d ]

The documentation for find_vpid() clearly states:

  "Must be called with the tasklist_lock or rcu_read_lock() held."

Presently we do neither for find_vpid() instance in bpf_task_fd_query().
Add proper rcu_read_lock/unlock() to fix the issue.

Fixes: 41bdc4b40ed6f ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY")
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220912133855.1218900-1-lee@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fs_enet: Fix wrong check in do_pd_setup

[ Upstream commit ec3f06b542a960806a81345042e4eee3f8c5dec4 ]

Should check of_iomap return value 'fep->fec.fecp' instead of 'fep->fcc.fccp'

Fixes: 976de6a8c304 ("fs_enet: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release

[ Upstream commit 812e92b824c1db16c9519f8624d48a9901a0d38f ]

Due to change to switch to use lock_sock inside rfcomm_sk_state_change
the socket shutdown/release procedure can cause a deadlock:

    rfcomm_sock_shutdown():
      lock_sock();
      __rfcomm_sock_close():
        rfcomm_dlc_close():
          __rfcomm_dlc_close():
            rfcomm_dlc_lock();
            rfcomm_sk_state_change():
              lock_sock();

To fix this when the call __rfcomm_sock_close is now done without
holding the lock_sock since rfcomm_dlc_lock exists to protect
the dlc data there is no need to use lock_sock in that code path.

Link: https://lore.kernel.org/all/CAD+dNTsbuU4w+Y_P7o+VEN7BYCAbZuwZx2+tH+OTzCdcZF82YA@mail.gmail.com/
Fixes: b7ce436a5d79 ("Bluetooth: switch to lock_sock in RFCOMM")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7915: do not check state before configuring implicit beamform

[ Upstream commit d2b5bb6dfab29fe32bedefaade88dcd182c03a00 ]

Do not need to check running state before configuring implicit Tx
beamform. It is okay to configure implicit Tx beamform in run time.
Noted that the existing connected stations will be applied for new
configuration only if they reconnected to the interface.

Fixes: 6d6dc980e07d ("mt76: mt7915: add implicit Tx beamforming support")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7615: add mt7615_mutex_acquire/release in mt7615_sta_set_decap_offload

[ Upstream commit 765c69d477a44c088e5d19e7758dfa4db418e3ba ]

Similar to mt7921 driver, introduce mt7615_mutex_acquire/release in
mt7615_sta_set_decap_offload in order to avoid sending mcu commands
while the device is in low-power state.

Fixes: d4b98c63d7a77 ("mt76: mt7615: add support for rx decapsulation offload")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: sdio: fix transmitting packet hangs

[ Upstream commit 250b1827205846ff346a76044955cb79d4963f70 ]

Fix transmitting packets hangs with continuing to pull the pending packet
from mac80211 queues when receiving Tx status notification from the device.

Fixes: aac5104bf631 ("mt76: sdio: do not run mt76_txq_schedule directly")
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Remove copy-paste leftover in gen2_update_rate_mask

[ Upstream commit d5350756c03cdf18696295c6b11d7acc4dbf825c ]

It looks like a leftover from copying rtl8xxxu_update_rate_mask,
which is used with the gen1 chips.

It wasn't causing any problems for my RTL8188FU test device, but it's
clearly a mistake, so remove it.

Fixes: f653e69009c6 ("rtl8xxxu: Implement basic 8723b specific update_rate_mask() function")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d5544fe8-9798-28f1-54bd-6839a1974b10@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration

[ Upstream commit e963a19c64ac0d2f8785d36a27391abd91ac77aa ]

Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.

Fixes: e1547c535ede ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/30a59f3a-cfa9-8379-7af0-78a8f4c77cfd@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: btf: fix truncated last_member_type_id in btf_struct_resolve

[ Upstream commit a37a32583e282d8d815e22add29bc1e91e19951a ]

When trying to finish resolving a struct member, btf_struct_resolve
saves the member type id in a u16 temporary variable. This truncates
the 32 bit type id value if it exceeds UINT16_MAX.

As a result, structs that have members with type ids > UINT16_MAX and
which need resolution will fail with a message like this:

    [67414] STRUCT ff_device size=120 vlen=12
        effect_owners type_id=67434 bits_offset=960 Member exceeds struct_size

Fix this by changing the type of last_member_type_id to u32.

Fixes: a0791f0df7d2 ("bpf: fix BTF limits")
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/r/20220910110120.339242-1-oss@lmb.io
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: meson-spicc: do not rely on busy flag in pow2 clk ops

[ Upstream commit 36acf80fc0c4b5ebe6fa010b524d442ee7f08fd3 ]

Since [1], controller's busy flag isn't set anymore when the
__spi_transfer_message_noqueue() is used instead of the
__spi_pump_transfer_message() logic for spi_sync transfers.

Since the pow2 clock ops were limited to only be available when a
transfer is ongoing (between prepare_transfer_hardware and
unprepare_transfer_hardware callbacks), the only way to track this
down is to check for the controller cur_msg.

[1] ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")

Fixes: 09992025dacd ("spi: meson-spicc: add local pow2 clock ops to preserve rate between messages")
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Reported-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220908121803.919943-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Fix skb misuse in TX queue selection

[ Upstream commit edd5747aa12ed61a5ecbfa58d3908623fddbf1e8 ]

rtl8xxxu_queue_select() selects the wrong TX queues because it's
reading memory from the wrong address. It expects to find ieee80211_hdr
at skb->data, but that's not the case after skb_push(). Move the call
to rtl8xxxu_queue_select() before the call to skb_push().

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7fa4819a-4f20-b2af-b7a6-8ee01ac49295@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()

[ Upstream commit 494a22765ce479c9f8ad181c5d24cffda9f534bb ]

Add the missing clk_disable_unprepare() before return
from spi_qup_pm_resume_runtime() in the error handling case.

Fixes: dae1a7700b34 (“spi: qup: Handle clocks in pm_runtime suspend and resume”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Link: https://lore.kernel.org/r/20220825065324.68446-2-xuqiang36@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()

[ Upstream commit 70034320fdc597b8f58b4a43bb547f17c4c5557a ]

Add the missing clk_disable_unprepare() before return
from spi_qup_resume() in the error handling case.

Fixes: 64ff247a978f (“spi: Add Qualcomm QUP SPI controller support”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Link: https://lore.kernel.org/r/20220825065324.68446-1-xuqiang36@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/xsk: Avoid use-after-free on ctx

[ Upstream commit af515a5587b8f45f19e11657746e0c89411b0380 ]

The put lowers the reference count to 0 and frees ctx, reading it
afterwards is invalid. Move the put after the uses and determine the
last use by the reference count being 1.

Fixes: 39e940d4abfa ("selftests/xsk: Destroy BPF resources only when ctx refcount drops to 0")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901202645.1463552-1-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw88: add missing destroy_workqueue() on error path in rtw_core_init()

[ Upstream commit b0ea758b30bbdf7c4323c78b7c50c05d2e1224d5 ]

Add the missing destroy_workqueue() before return from rtw_core_init()
in error path.

Fixes: fe101716c7c9 ("rtw88: replace tx tasklet with work queue")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826023817.3908255-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()

[ Upstream commit 620d5eaeb9059636864bda83ca1c68c20ede34a5 ]

There some bounds checking to ensure that "map_addr" is not out of
bounds before the start of the loop.  But the checking needs to be
done as we iterate through the loop because "map_addr" gets larger as
we iterate.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Yv8eGLdBslLAk3Ct@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend

[ Upstream commit fd3f106677bac70437dc12e76c827294ed495a44 ]

WMT cmd/event doesn't follow up the generic HCI cmd/event handling, it
needs constantly polling control pipe until the host received the WMT
event, thus, we should require to specifically acquire PM counter on the
USB to prevent the interface from entering auto suspended while WMT
cmd/event in progress.

Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Co-developed-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Use this_cpu_{inc|dec|inc_return} for bpf_task_storage_busy

[ Upstream commit 197827a05e13808c60f52632e9887eede63f1c16 ]

Now migrate_disable() does not disable preemption and under some
architectures (e.g. arm64) __this_cpu_{inc|dec|inc_return} are neither
preemption-safe nor IRQ-safe, so for fully preemptible kernel concurrent
lookups or updates on the same task local storage and on the same CPU
may make bpf_task_storage_busy be imbalanced, and
bpf_task_storage_trylock() on the specific cpu will always fail.

Fixing it by using this_cpu_{inc|dec|inc_return} when manipulating
bpf_task_storage_busy.

Fixes: bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Propagate error from htab_lock_bucket() to userspace

[ Upstream commit 66a7a92e4d0d091e79148a4c6ec15d1da65f4280 ]

In __htab_map_lookup_and_delete_batch() if htab_lock_bucket() returns
-EBUSY, it will go to next bucket. Going to next bucket may not only
skip the elements in current bucket silently, but also incur
out-of-bound memory access or expose kernel memory to userspace if
current bucket_cnt is greater than bucket_size or zero.

Fixing it by stopping batch operation and returning -EBUSY when
htab_lock_bucket() fails, and the application can retry or skip the busy
batch as needed.

Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Disable preemption when increasing per-cpu map_locked

[ Upstream commit 2775da21628738ce073a3a6a806adcbaada0f091 ]

Per-cpu htab->map_locked is used to prohibit the concurrent accesses
from both NMI and non-NMI contexts. But since commit 74d862b682f5
("sched: Make migrate_disable/enable() independent of RT"),
migrate_disable() is also preemptible under CONFIG_PREEMPT case, so now
map_locked also disallows concurrent updates from normal contexts
(e.g. userspace processes) unexpectedly as shown below:

process A                      process B

htab_map_update_elem()
  htab_lock_bucket()
    migrate_disable()
    /* return 1 */
    __this_cpu_inc_return()
    /* preempted by B */

                               htab_map_update_elem()
                                 /* the same bucket as A */
                                 htab_lock_bucket()
                                   migrate_disable()
                                   /* return 2, so lock fails */
                                   __this_cpu_inc_return()
                                   return -EBUSY

A fix that seems feasible is using in_nmi() in htab_lock_bucket() and
only checking the value of map_locked for nmi context. But it will
re-introduce dead-lock on bucket lock if htab_lock_bucket() is re-entered
through non-tracing program (e.g. fentry program).

One cannot use preempt_disable() to fix this issue as htab_use_raw_lock
being false causes the bucket lock to be a spin lock which can sleep and
does not work with preempt_disable().

Therefore, use migrate_disable() when using the spinlock instead of
preempt_disable() and defer fixing concurrent updates to when the kernel
has its own BPF memory allocator.

Fixes: 74d862b682f5 ("sched: Make migrate_disable/enable() independent of RT")
Reviewed-by: Hao Luo <haoluo@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: Fix backpressure mechanism on Tx

[ Upstream commit c00c4461689e15ac2cc3b9a595a54e4d8afd3d77 ]

Commit d678cbd2f867 ("xsk: Fix handling of invalid descriptors in XSK TX
batching API") fixed batch API usage against set of descriptors with
invalid ones but introduced a problem when AF_XDP SW rings are smaller
than HW ones. Mismatch of reported Tx'ed frames between HW generator and
user space app was observed. It turned out that backpressure mechanism
became a bottleneck when the amount of produced descriptors to CQ is
lower than what we grabbed from XSK Tx ring.

Say that 512 entries had been taken from XSK Tx ring but we had only 490
free entries in CQ. Then callsite (ZC driver) will produce only 490
entries onto HW Tx ring but 512 entries will be released from Tx ring
and this is what will be seen by the user space.

In order to fix this case, mix XSK Tx/CQ ring interractions by moving
around internal functions and changing call order:

*  pull out xskq_prod_nb_free() from xskq_prod_reserve_addr_batch()
   up to xsk_tx_peek_release_desc_batch();
** move xskq_cons_release_n() into xskq_cons_read_desc_batch()

After doing so, algorithm can be described as follows:

1. lookup Tx entries
2. use value from 1. to reserve space in CQ (*)
3. Read from Tx ring as much descriptors as value from 2
 3a. release descriptors from XSK Tx ring (**)
4. Finally produce addresses to CQ

Fixes: d678cbd2f867 ("xsk: Fix handling of invalid descriptors in XSK TX batching API")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220830121705.8618-1-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix to restore to original value when re-enabling hardware prefetch register

[ Upstream commit 499c8bb4693d1c8d8f3d6dd38e5bdde3ff5bd906 ]

The current pseudo_lock.c code overwrites the value of the
MSR_MISC_FEATURE_CONTROL to 0 even if the original value is not 0.
Therefore, modify it to save and restore the original values.

Fixes: 018961ae5579 ("x86/intel_rdt: Pseudo-lock region creation/removal core")
Fixes: 443810fe6160 ("x86/intel_rdt: Create debugfs files for pseudo-locking testing")
Fixes: 8a2fc0e1bc0c ("x86/intel_rdt: More precise L2 hit/miss measurements")
Signed-off-by: Kohei Tarumizu <tarumizu.kohei@fujitsu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/eb660f3c2010b79a792c573c02d01e8e841206ad.1661358182.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: mt7621: Fix an error message in mt7621_spi_probe()

[ Upstream commit 2b2bf6b7faa9010fae10dc7de76627a3fdb525b3 ]

'status' is known to be 0 at this point. The expected error code is
PTR_ERR(clk).

Switch to dev_err_probe() in order to display the expected error code (in a
human readable way).
This also filters -EPROBE_DEFER cases, should it happen.

Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/928f3fb507d53ba0774df27cea0bbba4b055993b.1661599671.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Fix a wrong type cast in btf_dumper_int

[ Upstream commit 7184aef9c0f7a81db8fd18d183ee42481d89bf35 ]

When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.

Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Signed-off-by: Lam Thai <lamthai@arista.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220824225859.9038-1-lamthai@arista.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: allow bw change during channel switch in mesh

[ Upstream commit 6b75f133fe05c36c52d691ff21545d5757fff721 ]

From 'IEEE Std 802.11-2020 section 11.8.8.4.1':
  The mesh channel switch may be triggered by the need to avoid
  interference to a detected radar signal, or to reassign mesh STA
  channels to ensure the MBSS connectivity.

  A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz
  MBSS may be changed to a 20/40 MHz MBSS.

Since the standard allows the change of bandwidth during
the channel switch in mesh, remove the bandwidth check present in
ieee80211_set_csa_beacon.

Fixes: c6da674aff94 ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh")
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix reference state management for synchronous callbacks

[ Upstream commit 9d9d00ac29d0ef7ce426964de46fa6b380357d0a ]

Currently, verifier verifies callback functions (sync and async) as if
they will be executed once, (i.e. it explores execution state as if the
function was being called once). The next insn to explore is set to
start of subprog and the exit from nested frame is handled using
curframe > 0 and prepare_func_exit. In case of async callback it uses a
customized variant of push_stack simulating a kind of branch to set up
custom state and execution context for the async callback.

While this approach is simple and works when callback really will be
executed only once, it is unsafe for all of our current helpers which
are for_each style, i.e. they execute the callback multiple times.

A callback releasing acquired references of the caller may do so
multiple times, but currently verifier sees it as one call inside the
frame, which then returns to caller. Hence, it thinks it released some
reference that the cb e.g. got access through callback_ctx (register
filled inside cb from spilled typed register on stack).

Similarly, it may see that an acquire call is unpaired inside the
callback, so the caller will copy the reference state of callback and
then will have to release the register with new ref_obj_ids. But again,
the callback may execute multiple times, but the verifier will only
account for acquired references for a single symbolic execution of the
callback, which will cause leaks.

Note that for async callback case, things are different. While currently
we have bpf_timer_set_callback which only executes it once, even for
multiple executions it would be safe, as reference state is NULL and
check_reference_leak would force program to release state before
BPF_EXIT. The state is also unaffected by analysis for the caller frame.
Hence async callback is safe.

Since we want the reference state to be accessible, e.g. for pointers
loaded from stack through callback_ctx's PTR_TO_STACK, we still have to
copy caller's reference_state to callback's bpf_func_state, but we
enforce that whatever references it adds to that reference_state has
been released before it hits BPF_EXIT. This requires introducing a new
callback_ref member in the reference state to distinguish between caller
vs callee references. Hence, check_reference_leak now errors out if it
sees we are in callback_fn and we have not released callback_ref refs.
Since there can be multiple nested callbacks, like frame 0 -> cb1 -> cb2
etc. we need to also distinguish between whether this particular ref
belongs to this callback frame or parent, and only error for our own, so
we store state->frameno (which is always non-zero for callbacks).

In short, callbacks can read parent reference_state, but cannot mutate
it, to be able to use pointers acquired by the caller. They must only
undo their changes (by releasing their own acquired_refs before
BPF_EXIT) on top of caller reference_state before returning (at which
point the caller and callback state will match anyway, so no need to
copy it back to caller).

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823013125.24938-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm3601x: Don't use mutex after it was destroyed

[ Upstream commit 32f7eed0c763a9b89f6b357ec54b48398fc7b99e ]

The mutex might still be in use until the devm cleanup callback
devm_led_classdev_flash_release() is called. This only happens some time
after lm3601x_remove() completed.

Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed")
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()

[ Upstream commit f020d9570a04df0762a2ac5c50cf1d8c511c9164 ]

When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.

And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared

peer map event log:
[  306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[  306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[  306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[  306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[  306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166

peer unmap event log:
[  435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[  435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[  435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[  435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[  435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166

use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010]  ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041]  drv_sta_state+0x115/0x677 [mac80211]
[21713.800059]  __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076]  __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093]  ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110]  ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137]  cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153]  nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161]  genl_rcv_msg+0x38e/0x3be
[21713.800166]  netlink_rcv_skb+0x89/0xf7
[21713.800171]  genl_rcv+0x28/0x36
[21713.800176]  netlink_unicast+0x179/0x24b
[21713.800181]  netlink_sendmsg+0x3a0/0x40e
[21713.800187]  sock_sendmsg+0x72/0x76
[21713.800192]  ____sys_sendmsg+0x16d/0x1e3
[21713.800196]  ___sys_sendmsg+0x95/0xd1
[21713.800200]  __sys_sendmsg+0x85/0xbf
[21713.800205]  do_syscall_64+0x43/0x55
[21713.800210]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241]  ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254]  ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265]  ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277]  ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283]  ath10k_pci_process_rx_cb+0x195/0x1df [ath10k_pci]
[21713.800294]  ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core]
[21713.800305]  ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core]
[21713.800310]  ath10k_pci_napi_poll+0x49/0x144 [ath10k_pci]
[21713.800316]  net_rx_action+0xdc/0x361
[21713.800320]  __do_softirq+0x163/0x29a
[21713.800325]  asm_call_irq_on_stack+0x12/0x20
[21713.800331]  do_softirq_own_stack+0x3c/0x48
[21713.800337]  __irq_exit_rcu+0x9b/0x9d
[21713.800342]  common_interrupt+0xc9/0x14d
[21713.800346]  asm_common_interrupt+0x1e/0x40
[21713.800351]  ksoftirqd_should_run+0x5/0x16
[21713.800357]  smpboot_thread_fn+0x148/0x211
[21713.800362]  kthread+0x150/0x15f
[21713.800367]  ret_from_fork+0x22/0x30
[21713.800370]
[21713.800374] freed by task 708 on cpu 1 at 21713.799953s:
[21713.800498]  ath10k_sta_state+0x2c6/0xb8a [ath10k_core]
[21713.800515]  drv_sta_state+0x115/0x677 [mac80211]
[21713.800532]  __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800548]  __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800565]  ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800581]  ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800598]  cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800614]  nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800619]  genl_rcv_msg+0x38e/0x3be
[21713.800623]  netlink_rcv_skb+0x89/0xf7
[21713.800628]  genl_rcv+0x28/0x36
[21713.800632]  netlink_unicast+0x179/0x24b
[21713.800637]  netlink_sendmsg+0x3a0/0x40e
[21713.800642]  sock_sendmsg+0x72/0x76
[21713.800646]  ____sys_sendmsg+0x16d/0x1e3
[21713.800651]  ___sys_sendmsg+0x95/0xd1
[21713.800655]  __sys_sendmsg+0x85/0xbf
[21713.800659]  do_syscall_64+0x43/0x55
[21713.800663]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1

Fixes: d0eeafad1189 ("ath10k: Clean up peer when sta goes away.")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220801141930.16794-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: 8192de: correct checking of IQK reload

[ Upstream commit 93fbc1ebd978cf408ef5765e9c1630fce9a8621b ]

Since IQK could spend time, we make a cache of IQK result matrix that looks
like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we
have made a cache. To determine a cache is made, we check
iqk_matrix[channel_idx].val[0][0].

The initial commit 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that
is always true, and this mistake is found by commit ee3db469dd31
("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so
I recall the vendor driver to find fix and apply the correctness.

Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Fix handling of oversized NFSv4 COMPOUND requests

[ Upstream commit 7518a3dc5ea249d4112156ce71b8b184eb786151 ]

If an NFS server returns NFS4ERR_RESOURCE on the first operation in
an NFSv4 COMPOUND, there's no way for a client to know where the
problem is and then simplify the compound to make forward progress.

So instead, make NFSD process as many operations in an oversized
COMPOUND as it can and then return NFS4ERR_RESOURCE on the first
operation it did not process.

pynfs NFSv4.0 COMP6 exercises this case, but checks only for the
COMPOUND status code, not whether the server has processed any
of the operations.

pynfs NFSv4.1 SEQ6 and SEQ7 exercise the NFSv4.1 case, which detects
too many operations per COMPOUND by checking against the limits
negotiated when the session was created.

Suggested-by: Bruce Fields <bfields@fieldses.org>
Fixes: 0078117c6d91 ("nfsd: return RESOURCE not GARBAGE_ARGS on too many ops")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Protect against send buffer overflow in NFSv2 READDIR

[ Upstream commit 00b4492686e0497fdb924a9d4c8f6f99377e176c ]

Restore the previous limit on the @count argument to prevent a
buffer overflow attack.

Fixes: 53b1119a6e50 ("NFSD: Fix READDIR buffer overflow")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix svcxdr_init_encode's buflen calculation

[ Upstream commit 1242a87da0d8cd2a428e96ca68e7ea899b0f4624 ]

Commit 2825a7f90753 ("nfsd4: allow encoding across page boundaries")
added an explicit computation of the remaining length in the rq_res
XDR buffer.

The computation appears to suffer from an "off-by-one" bug. Because
buflen is too large by one page, XDR encoding can run off the end of
the send buffer by eventually trying to use the struct page address
in rq_page_end, which always contains NULL.

Fixes: bddfdbcddbe2 ("NFSD: Extract the svcxdr_init_encode() helper")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix svcxdr_init_decode's end-of-buffer calculation

[ Upstream commit 90bfc37b5ab91c1a6165e3e5cfc49bf04571b762 ]

Ensure that stream-based argument decoding can't go past the actual
end of the receive buffer. xdr_init_decode's calculation of the
value of xdr->end over-estimates the end of the buffer because the
Linux kernel RPC server code does not remove the size of the RPC
header from rqstp->rq_arg before calling the upper layer's
dispatcher.

The server-side still uses the svc_getnl() macros to decode the
RPC call header. These macros reduce the length of the head iov
but do not update the total length of the message in the buffer
(buf->len).

A proper fix for this would be to replace the use of svc_getnl() and
friends in the RPC header decoder, but that would be a large and
invasive change that would be difficult to backport.

Fixes: 5191955d6fc6 ("SUNRPC: Prepare for xdr_stream-style decoding on the server-side")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Fix a memory leak in an error handling path

[ Upstream commit fd1ef88049de09bc70d60b549992524cfc0e66ff ]

If this memdup_user() call fails, the memory allocated in a previous call
a few lines above should be freed. Otherwise it leaks.

Fixes: 6ee95d1c8991 ("nfsd: add support for upcall version 2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Preserve special st_shndx indexes in elf_update_symbol

[ Upstream commit 5141d3a06b2da1731ac82091298b766a1f95d3d8 ]

elf_update_symbol fails to preserve the special st_shndx values
between [SHN_LORESERVE, SHN_HIRESERVE], which results in it
converting SHN_ABS entries into SHN_UNDEF, for example. Explicitly
check for the special indexes and ensure these symbols are not
marked undefined.

Fixes: ead165fa1042 ("objtool: Fix symbol creation")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-17-samitolvanen@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE

[ Upstream commit 14ca1a4690750bb54e1049e49f3140ef48958a6e ]

MT_MEMORY_RO is introduced by commit 598f0a99fa8a ("ARM: 9210/1:
Mark the FDT_FIXED sections as shareable"), which is a readonly
memory type for FDT area, but there are some different between
ARM_LPAE and non-ARM_LPAE, we need to setup PMD_SECT_AP2 and
L_PMD_SECT_RDONLY for MT_MEMORY_RO when ARM_LAPE enabled.

non-ARM_LPAE 0xff800000-0xffa00000           2M PGD KERNEL      ro NX SHD
ARM_LPAE 0xff800000-0xffc00000           4M PMD RW NX SHD
ARM_LPAE+fix 0xff800000-0xffc00000           4M PMD ro NX SHD

Fixes: 598f0a99fa8a ("ARM: 9210/1: Mark the FDT_FIXED sections as shareable")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()

[ Upstream commit 2ccd19b3ffac07cc7e75a2bd1ed779728bb67197 ]

After ARM supports p4d page tables, the pg_level for note_page()
in walk_pmd() should be 4, not 3, fix it.

Fixes: 84e6ffb2c49c ("arm: add support for folded p4d page tables")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()

[ Upstream commit 11bec9cba4de06b3c0e9e4041453c2caaa1cbec1 ]

In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.

Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails.

Fixes: 5dc76a96e95a ("MIPS: PCI: use information from 1-wire PROM for IOC3 detection")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: SGI-IP27: Free some unused memory

[ Upstream commit 33d7085682b4aa212ebfadbc21da81dfefaaac16 ]

platform_device_add_data() duplicates the memory it is passed. So we can
free some memory to save a few bytes that would remain unused otherwise.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 11bec9cba4de ("MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: machvec: Use char[] for section boundaries

[ Upstream commit c5783af354688b24abd359f7086c282ec74de993 ]

As done for other sections, define the extern as a character array,
which relaxes many of the compiler-time object size checks, which would
otherwise assume it's a single long. Solves the following build error:

arch/sh/kernel/machvec.c: error: array subscript 'struct sh_machine_vector[0]' is partly outside array bounds of 'long int[1]' [-Werror=array-bounds]:  => 105:33

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2209050944290.964530@ramsan.of.borg/
Fixes: 9655ad03af2d ("sh: Fixup machvec support.")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Rich Felker <dalias@libc.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()

[ Upstream commit cff895277c8558221ba180aefe26799dcb4eec86 ]

Since the policy needs to be accessed first when obtaining cpu devices,
first check whether the policy is legal before this.

Fixes: 5130802ddbb1 ("thermal: cpu_cooling: Switch to QoS requests for freq limits")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers

[ Upstream commit a26aa12384158116c0d80d50e0bdc7b3323551e2 ]

The xattr code in ntfs3 is currently a bit confused. For example, it
defines a POSIX ACL i_op->set_acl() method but instead of relying on the
generic POSIX ACL VFS helpers it defines its own set of xattr helpers
with the consequence that i_op->set_acl() is currently dead code.

Switch ntfs3 to rely on the VFS POSIX ACL xattr handlers. Also remove
i_op->{g,s}et_acl() methods from symlink inode operations. Symlinks
don't support xattrs.

This is a preliminary change for the following patches which move
handling idmapped mounts directly in posix_acl_xattr_set().

This survives POSIX ACL xfstests.

Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>>
Signed-off-by: Sasha Levin <sashal@kernel.org>

userfaultfd: open userfaultfds with O_RDONLY

[ Upstream commit abec3d015fdfb7c63105c7e1c956188bf381aa55 ]

Since userfaultfd doesn't implement a write operation, it is more
appropriate to open it read-only.

When userfaultfds are opened read-write like it is now, and such fd is
passed from one process to another, SELinux will check both read and
write permissions for the target process, even though it can't actually
do any write operation on the fd later.

Inspired by the following bug report, which has hit the SELinux scenario
described above:
https://bugzilla.redhat.com/show_bug.cgi?id=1974559

Reported-by: Robert O'Callahan <roc@ocallahan.org>
Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: fix blocking of security.ima xattrs of unsupported algorithms

[ Upstream commit 5926586f291b53cb8a0c9631fc19489be1186e2d ]

Limit validating the hash algorithm to just security.ima xattr, not
the security.evm xattr or any of the protected EVM security xattrs,
nor posix acls.

Fixes: 50f742dd9147 ("IMA: block writes of the security.ima xattr with unsupported algorithms")
Reported-by: Christian Brauner <brauner@kernel.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: use "grep -E" instead of "egrep"

commit c969bb8dbaf2f3628927eae73e7c579a74cf1b6e upstream.

The latest version of grep claims that egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this by using "grep -E" instead.

Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[PM: tweak to remove vdso reference, cleanup subj line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>