Johannes Berg [Thu, 13 Apr 2023 07:44:01 +0000 (10:44 +0300)]
wifi: iwlwifi: debug: fix crash in __iwl_err()
In __iwl_err(), if we rate-limit the message away, then
vaf.va is still NULL-initialized by the time we get to
the tracing code, which then crashes. When it doesn't
get rate-limited out, it's still wrong to reuse the old
args2 that was already printed, which is why we bother
making a copy in the first place.
Assign vaf.va properly to fix this.
Fixes:
e5f1cc98cc1b ("iwlwifi: allow rate-limited error messages")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:29 +0000 (22:07 +0200)]
wifi: rtw88: Add support for the SDIO based RTL8821CS chipset
Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as
well as the existing RTL8821C chipset code.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-10-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:28 +0000 (22:07 +0200)]
wifi: rtw88: Add support for the SDIO based RTL8822CS chipset
Wire up RTL8822CS chipset support using the new rtw88 SDIO HCI code as
well as the existing RTL8822C chipset code.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-9-martin.blumenstingl@googlemail.com
Jernej Skrabec [Wed, 5 Apr 2023 20:07:27 +0000 (22:07 +0200)]
wifi: rtw88: Add support for the SDIO based RTL8822BS chipset
Wire up RTL8822BS chipset support using the new rtw88 SDIO HCI code as
well as the existing RTL8822B chipset code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-8-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:26 +0000 (22:07 +0200)]
mmc: sdio: add Realtek SDIO vendor ID and various wifi device IDs
Add the SDIO vendor ID for Realtek and some device IDs extracted from
their GPL vendor driver. This will be useful in the future when the
rtw88 driver gains support for these chips.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-7-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:25 +0000 (22:07 +0200)]
wifi: rtw88: main: Reserve 8 bytes of extra TX headroom for SDIO cards
For SDIO host controllers with DMA support the TX buffer physical memory
address need to be aligned at an 8-byte boundary. Reserve 8 bytes of
extra TX headroom so we can align the data without re-allocating the
transmit buffer.
While here, also remove the TODO comment regarding extra headroom for
USB and SDIO. For SDIO the extra headroom is now handled and for USB it
was not needed so far.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-6-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:24 +0000 (22:07 +0200)]
wifi: rtw88: main: Add the {cpwm,rpwm}_addr for SDIO based chipsets
Initialize the rpwm_addr and cpwm_addr for power-saving support on SDIO
based chipsets.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-5-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:23 +0000 (22:07 +0200)]
wifi: rtw88: mac: Support SDIO specific bits in the power on sequence
Add the code specific to SDIO HCI in the MAC power on sequence. This is
based on the RTL8822BS and RTL8822CS vendor drivers.
Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-4-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:22 +0000 (22:07 +0200)]
wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets
Add a sub-driver for SDIO based chipsets which implements the following
functionality:
- register accessors for 8, 16 and 32 bits for all states of the card
(including usage of 4x 8 bit access for one 32 bit buffer if the card
is not fully powered on yet - or if it's fully powered on then 1x 32
bit access is used)
- checking whether there's space in the TX FIFO queue to transmit data
- transfers from the host to the device for actual network traffic,
reserved pages (for firmware download) and H2C (host-to-card)
transfers
- receiving data from the device
- deep power saving state
The transmit path is optimized so DMA-capable SDIO host controllers can
directly use the buffers provided because the buffer's physical
addresses are 8 byte aligned.
The receive path is prepared to support RX aggregation where the
chipset combines multiple MAC frames into one bigger buffer to reduce
SDIO transfer overhead.
Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-3-martin.blumenstingl@googlemail.com
Martin Blumenstingl [Wed, 5 Apr 2023 20:07:21 +0000 (22:07 +0200)]
wifi: rtw88: Clear RTW_FLAG_POWERON early in rtw_mac_power_switch()
The SDIO HCI implementation needs to know when the MAC is powered on.
This is needed because 32-bit register access has to be split into 4x
8-bit register access when the MAC is not fully powered on or while
powering off. When the MAC is powered on 32-bit register access can be
used to reduce the number of transfers but splitting into 4x 8-bit
register access still works in that case.
During the power on sequence is how RTW_FLAG_POWERON is only set when
the power on sequence has completed successfully. During power off
however RTW_FLAG_POWERON is set. This means that the upcoming SDIO HCI
implementation does not know that it has to use 4x 8-bit register
accessors. Clear the RTW_FLAG_POWERON flag early when powering off the
MAC so the whole power off sequence is processed with RTW_FLAG_POWERON
unset. This will make it possible to use the RTW_FLAG_POWERON flag in
the upcoming SDIO HCI implementation.
Note that a failure in rtw_pwr_seq_parser() while applying
chip->pwr_off_seq can theoretically result in the RTW_FLAG_POWERON
flag being cleared while the chip is still powered on. However,
depending on when the failure occurs in the power off sequence the
chip may be on or off. Even the original approach of clearing
RTW_FLAG_POWERON only when the power off sequence has been applied
successfully could end up in some corner case where the chip is
powered off but RTW_FLAG_POWERON was not cleared.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-2-martin.blumenstingl@googlemail.com
Aloka Dixit [Mon, 10 Apr 2023 20:03:32 +0000 (13:03 -0700)]
wifi: mac80211: set EHT support flag in AP mode
Set 'eht_support' flag if EHT capabilities are present.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230410200332.32265-1-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Eric Dumazet [Tue, 4 Apr 2023 17:16:58 +0000 (17:16 +0000)]
wifi: mac80211_hwsim: fix potential NULL deref in hwsim_pmsr_report_nl()
syzbot reported a NULL dereference caused by a missing check
in hwsim_pmsr_report_nl(), and bisected the issue to cited commit.
v2: test the nlattr before using nla_data() on it (Simon Horman)
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 5084 Comm: syz-executor104 Not tainted 6.3.0-rc4-next-
20230331-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:jhash+0x339/0x610 include/linux/jhash.h:95
Code: 83 fd 01 0f 84 5f ff ff ff eb de 83 fd 05 74 3a e8 ac f5 71 fd 48 8d 7b 05 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 96 02 00 00
RSP: 0018:
ffffc90003abf298 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
0000000000000004 RCX:
0000000000000000
RDX:
0000000000000001 RSI:
ffffffff84111ba4 RDI:
0000000000000009
RBP:
0000000000000006 R08:
0000000000000005 R09:
000000000000000c
R10:
0000000000000006 R11:
0000000000000000 R12:
000000004d2c27cd
R13:
000000002bd9e6c2 R14:
000000002bd9e6c2 R15:
000000002bd9e6c2
FS:
0000555556847300(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000045ad50 CR3:
0000000078aa6000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup include/linux/rhashtable.h:604 [inline]
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
get_hwsim_data_ref_from_addr+0xb9/0x600 drivers/net/wireless/virtual/mac80211_hwsim.c:757
hwsim_pmsr_report_nl+0xe7/0xd50 drivers/net/wireless/virtual/mac80211_hwsim.c:3764
genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2572
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
____sys_sendmsg+0x71c/0x900 net/socket.c:2501
___sys_sendmsg+0x110/0x1b0 net/socket.c:2555
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
2af3b2a631b1 ("mac80211_hwsim: add PMSR report support via virtio")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jaewan Kim <jaewan@google.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jaewan Kim <jaewan@google.com>
Link: https://lore.kernel.org/r/20230404171658.917361-1-edumazet@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Gregory Greenman [Mon, 10 Apr 2023 14:07:21 +0000 (17:07 +0300)]
wifi: iwlwifi: fix duplicate entry in iwl_dev_info_table
There're two identical entries for ax1650 device in
iwl_dev_info_table. Remove one of the duplicate entries.
Fixes:
953e66a7238b ("iwlwifi: add new ax1650 killer device")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Gregory Greenman [Mon, 10 Apr 2023 14:07:20 +0000 (17:07 +0300)]
wifi: iwlwifi: mvm: fix the order of TIMING_MEASUREMENT notifications
Host commands and notifications are expected to be ordered in
iwl_mvm_groups array. Fix the order of two new TIMING_MEASUREMENT
notifications.
Fixes:
c7eca79def44 ("wifi: iwlwifi: mvm: report hardware timestamps in RX/TX status")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/linux-wireless/20230331175121.GA3127046@dev-arch.thelio-3990X/
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230410140721.897683-1-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Shenwei Wang [Mon, 3 Apr 2023 22:23:02 +0000 (17:23 -0500)]
net: stmmac: dwmac-imx: use platform specific reset for imx93 SoCs
The patch addresses an issue with the reset logic on the i.MX93 SoC, which
requires configuration of the correct interface speed under RMII mode to
complete the reset. The patch implements a fix_soc_reset function and uses
it specifically for the i.MX93 SoCs.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230403222302.328262-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shenwei Wang [Mon, 3 Apr 2023 22:23:01 +0000 (17:23 -0500)]
net: stmmac: add support for platform specific reset
This patch adds support for platform-specific reset logic in the
stmmac driver. Some SoCs require a different reset mechanism than
the standard dwmac IP reset. To support these platforms, a new function
pointer 'fix_soc_reset' is added to the plat_stmmacenet_data structure.
The stmmac_reset in hwif.h is modified to call the 'fix_soc_reset'
function if it exists. This enables the driver to use the platform-specific
reset logic when necessary.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230403222302.328262-1-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pedro Tammela [Tue, 4 Apr 2023 20:34:49 +0000 (17:34 -0300)]
net/sched: sch_mqprio: use netlink payload helpers
For the sake of readability, use the netlink payload helpers from
the 'nla_get_*()' family to parse the attributes.
tdc results:
1..5
ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
ok 2 453a - Delete nonexistent mqprio Qdisc
ok 3 5292 - Delete mqprio Qdisc twice
ok 4 45a9 - Add mqprio Qdisc to single-queue device
ok 5 2ba9 - Show mqprio class
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rob Herring [Tue, 4 Apr 2023 20:41:52 +0000 (15:41 -0500)]
dt-bindings: net: dsa: brcm,sf2: Drop unneeded "#address-cells/#size-cells"
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as
no immediate child nodes have an address. What was probably intended was
to put them in the 'ports' node, but that's not necessary as that is
covered by ethernet-switch.yaml via dsa.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rob Herring [Tue, 4 Apr 2023 20:42:13 +0000 (15:42 -0500)]
dt-bindings: net: ethernet-switch: Make "#address-cells/#size-cells" required
The schema doesn't allow for a single (unaddressed) ethernet port node
nor does a single port switch make much sense. So if there's always
multiple child nodes, "#address-cells" and "#size-cells" should be
required.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204213.635773-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 6 Apr 2023 00:25:02 +0000 (17:25 -0700)]
Merge tag 'wireless-next-2023-04-05' of git://git./linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.
* enable Wi-Fi 7 (EHT) mesh support
* tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits)
wifi: rt2x00: Fix memory leak when handling surveys
wifi: b43legacy: Remove the unused function prev_slot()
wifi: rtw89: Remove redundant pci_clear_master
wifi: rtw89: fix potential race condition between napi_init and napi_enable
wifi: rtw89: config EDCCA threshold during scan to prevent TX failed
wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering
wifi: rtw89: remove superfluous H2C of join_info
wifi: rtw89: set data lowest rate according to AP supported rate
wifi: rtw89: add counters of register-based H2C/C2H
wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1
wifi: rtw89: coex: Add report control v5 variation
wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter
wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving
wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B
bcma: remove unused mips_read32 function
bcma: Use of_address_to_resource()
wifi: mwifiex: remove unused evt_buf variable
wifi: brcmsmac: ampdu: remove unused suc_mpdu variable
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
...
====================
Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 6 Apr 2023 00:06:02 +0000 (17:06 -0700)]
Merge tag 'linux-can-next-for-6.4-
20230404-2' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-04-04-2
The first patch is by Oliver Hartkopp and makes the maximum pdu size
of the CAN ISOTP protocol configurable.
The following 5 patches are by Dario Binacchi and add support for the
bxCAN controller by ST.
Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse
warning.
Peng Fan's patch adds an optional power-domains property to the
flexcan device tree binding.
Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the
esd_usb driver.
The last patch is by Oliver Hartkopp and converts the USB IDs of the
kvaser_usb driver to hexadecimal values.
* tag 'linux-can-next-for-6.4-
20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
kvaser_usb: convert USB IDs to hexadecimal values
can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
dt-bindings: can: fsl,flexcan: add optional power-domains property
can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init
can: bxcan: add support for ST bxCAN controller
ARM: dts: stm32: add pin map for CAN controller on stm32f4
ARM: dts: stm32: add CAN support on stm32f429
dt-bindings: net: can: add STM32 bxcan DT bindings
dt-bindings: arm: stm32: add compatible for syscon gcan node
can: isotp: add module parameter for maximum pdu size
====================
Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Mon, 3 Apr 2023 15:43:16 +0000 (17:43 +0200)]
net: qrtr: correct types of trace event parameters
The arguments passed to the trace events are of type unsigned int,
however the signature of the events used __le32 parameters.
I may be missing the point here, but sparse flagged this and it
does seem incorrect to me.
net/qrtr/ns.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/qrtr.h):
./include/trace/events/qrtr.h:11:1: warning: cast to restricted __le32
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
... (a lot more similar warnings)
net/qrtr/ns.c:115:47: expected restricted __le32 [usertype] service
net/qrtr/ns.c:115:47: got unsigned int service
net/qrtr/ns.c:115:61: warning: incorrect type in argument 2 (different base types)
... (a lot more similar warnings)
Fixes:
dfddb54043f0 ("net: qrtr: Add tracepoint support")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230402-qrtr-trace-types-v1-1-92ad55008dd3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Mon, 3 Apr 2023 19:35:46 +0000 (21:35 +0200)]
net: phy: meson-gxl: enable edpd tunable support for G12A internal PHY
Enable EDPD PHY tunable support for the G12A internal PHY, reusing the
recently added tunable support in the smsc driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/8d309575-067c-7321-33cf-6ffac11f7c8d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oliver Hartkopp [Wed, 29 Mar 2023 09:09:15 +0000 (11:09 +0200)]
kvaser_usb: convert USB IDs to hexadecimal values
USB IDs are usually represented in 16 bit hexadecimal values. To match
the common representation in lsusb and for searching USB IDs in the
internet convert the decimal values to lowercase hexadecimal.
changes since v1: https://lore.kernel.org/all/
20230327175344.4668-1-socketcan@hartkopp.net
- drop the aligned block indentation (suggested by Jimmy)
- use lowercase hex values (suggested by Alex)
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/all/20230329090915.3127-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Frank Jungclaus [Thu, 30 Mar 2023 18:44:46 +0000 (20:44 +0200)]
can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
Announce that the driver supports CAN_CTRLMODE_BERR_REPORTING by means
of priv->can.ctrlmode_supported. Until now berr reporting always has
been active without taking care of the berr-reporting parameter given
to an "ip link set ..." command.
Additionally apply some changes to function esd_usb_rx_event():
- If berr reporting is off and it is also no state change, then
immediately return.
- Unconditionally (even in case of the above "immediate return") store
tx- and rx-error counters, so directly use priv->bec.txerr and
priv->bec.rxerr instead of intermediate variables.
- Not directly related, but to better point out the linkage between a
failed alloc_can_err_skb() and stats->rx_dropped++:
Move the increment of the rx_dropped statistic counter (back) to
directly behind the err_skb allocation.
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20230330184446.2802135-1-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Peng Fan [Tue, 28 Mar 2023 05:46:02 +0000 (13:46 +0800)]
dt-bindings: can: fsl,flexcan: add optional power-domains property
Add optional power-domains property for i.MX8 usage.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230328054602.1974255-1-peng.fan@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Geert Uytterhoeven [Wed, 29 Mar 2023 06:40:55 +0000 (08:40 +0200)]
can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init
Fix the following compile warning with C=1:
| drivers/net/can/rcar/rcar_canfd.c:1852:59: warning: Using plain integer as NULL pointer
Fixes:
a0340df7eca4f28e ("can: rcar_canfd: Add transceiver support")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230328145658.7fdbc394@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/all/7f7b0dde0caa2d2977b4fb5b65b63036e75f5022.1680071972.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Paolo Abeni [Tue, 4 Apr 2023 10:46:26 +0000 (12:46 +0200)]
Merge branch 'vsock-return-errors-other-than-enomem-to-socket'
Arseniy Krasnov says:
====================
vsock: return errors other than -ENOMEM to socket
this patchset removes behaviour, where error code returned from any
transport was always switched to ENOMEM. This works in the same way as
patch from Bobby Eshleman:
commit
c43170b7e157 ("vsock: return errors other than -ENOMEM to socket"),
but for receive calls. VMCI transport is also updated (both tx and rx
SOCK_STREAM callbacks), because it returns VMCI specific error code to
af_vsock.c (like VMCI_ERROR_*). Tx path is already merged to net, so it
was excluded from patchset in v4. At the same time, virtio and Hyper-V
transports are using general error codes, so there is no need to update
them.
vsock_test suite is also updated.
Link to v1:
https://lore.kernel.org/netdev/
97f19214-ba04-c47e-7486-
72e8aa16c690@sberdevices.ru/
Link to v2:
https://lore.kernel.org/netdev/
60abc0da-0412-6e25-eeb0-
8e32e3ec21e7@sberdevices.ru/
Link to v3:
https://lore.kernel.org/netdev/
dead4842-333a-015e-028b-
302151336ff9@sberdevices.ru/
====================
Link: https://lore.kernel.org/r/0d20e25a-640c-72c1-2dcb-7a53a05e3132@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arseniy Krasnov [Mon, 3 Apr 2023 11:26:18 +0000 (14:26 +0300)]
vsock/test: update expected return values
This updates expected return values for invalid buffer test. Now such
values are returned from transport, not from af_vsock.c.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arseniy Krasnov [Mon, 3 Apr 2023 11:25:12 +0000 (14:25 +0300)]
vsock: return errors other than -ENOMEM to socket
This removes behaviour, where error code returned from any transport
was always switched to ENOMEM. This works in the same way as:
commit
c43170b7e157 ("vsock: return errors other than -ENOMEM to socket"),
but for receive calls.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arseniy Krasnov [Mon, 3 Apr 2023 11:24:17 +0000 (14:24 +0300)]
vsock/vmci: convert VMCI error code to -ENOMEM on receive
This adds conversion of VMCI specific error code to general -ENOMEM. It
is preparation for the next patch, which changes af_vsock.c behaviour
on receive to pass value returned from transport to the user.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Tue, 4 Apr 2023 02:02:53 +0000 (19:02 -0700)]
Merge branch 'sfc-support-unicast-ptp'
Íñigo Huguet says:
====================
sfc: support unicast PTP
Unicast PTP was not working with sfc NICs.
The reason was that these NICs don't timestamp all incoming packets,
but instead they only timestamp packets of the queues that are selected
for that. Currently, only one RX queue is configured for timestamp: the
RX queue of the PTP channel. The packets that are put in the PTP RX
queue are selected according to firmware filters configured from the
driver.
Multicast PTP was already working because the needed filters are known
in advance, so they're inserted when PTP is enabled. This patches
add the ability to dynamically add filters for unicast addresses,
extracted from the TX PTP-event packets.
Since we don't know in advance how many filters we'll need, some info
about the filters need to be saved. This will allow to check if a filter
already exists or if a filter is too old and should be removed.
Note that the previous point is unnecessary for multicast filters, but
I've opted to change how they're handled to match the new unicast's
filters to avoid having duplicate insert/remove_filters functions,
once for each type of filter.
Tested: With ptp4l, all combinations of IPv4/IPv6, master/slave and
unicast/multicast
Reported-by: Yalin Li <yalli@redhat.com>
====================
Link: https://lore.kernel.org/r/20230331111404.17256-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Íñigo Huguet [Fri, 31 Mar 2023 11:14:04 +0000 (13:14 +0200)]
sfc: remove expired unicast PTP filters
Filters inserted to support unicast PTP mode might become unused after
some time, so we need to remove them to avoid accumulating many of them.
Refresh the expiration time of a filter each time it's used. Then check
periodically if any filter hasn't been used for a long time (30s) and
remove it.
Reported-by: Yalin Li <yalli@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Íñigo Huguet [Fri, 31 Mar 2023 11:14:03 +0000 (13:14 +0200)]
sfc: support unicast PTP
When sending a PTP event packet, add the correct filters that will make
that future incoming unicast PTP event packets will be timestamped.
The unicast address for the filter is gotten from the outgoing skb
before sending it.
Until now they were not timestamped because only filters that match with
the PTP multicast addressed were being configured into the NIC for the
PTP special channel. Packets received through different channels are not
timestamped, getting "received SYNC without timestamp" error in ptp4l.
Note that the inserted filters are never removed unless the NIC is stopped
or reconfigured, so efx_ptp_stop is called. Removal of old filters will
be handled by the next patch.
Additionally, cleanup a bit efx_ptp_xmit_skb_mc to use the reverse xmas
tree convention and remove an unnecessary assignment to rc variable in
void function.
Reported-by: Yalin Li <yalli@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Íñigo Huguet [Fri, 31 Mar 2023 11:14:02 +0000 (13:14 +0200)]
sfc: allow insertion of filters for unicast PTP
Add a second list for unicast filters and generalize the
efx_ptp_insert/remove_filters functions to allow acting in any of the 2
lists.
No filters for unicast are inserted yet. That will be done in the next
patch.
The reason to use 2 different lists instead of a single one is that, in
next patches, we will want to check if unicast filters are already added
and if they're expired. We don't need that for multicast filters.
Reported-by: Yalin Li <yalli@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Íñigo Huguet [Fri, 31 Mar 2023 11:14:01 +0000 (13:14 +0200)]
sfc: store PTP filters in a list
Instead of using a fixed sized array for the PTP filters, use a list.
This is not actually necessary at this point because the filters for
multicast PTP are a fixed number, but this is a preparation for the
following patches adding support for unicast PTP.
To avoid confusion with the new struct type efx_ptp_rxfilter, change the
name of some local variables from rxfilter to spec, given they're of the
type efx_filter_spec.
Reported-by: Yalin Li <yalli@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Armin Wolf [Thu, 30 Mar 2023 21:56:37 +0000 (23:56 +0200)]
wifi: rt2x00: Fix memory leak when handling surveys
When removing a rt2x00 device, its associated channel surveys
are not freed, causing a memory leak observable with kmemleak:
unreferenced object 0xffff9620f0881a00 (size 512):
comm "systemd-udevd", pid 2290, jiffies
4294906974 (age 33.768s)
hex dump (first 32 bytes):
70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD..............
00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................
backtrace:
[<
ffffffffb0ed858b>] __kmalloc+0x4b/0x130
[<
ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib]
[<
ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb]
[<
ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib]
[<
ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb]
[<
ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore]
[<
ffffffffb13be2d5>] really_probe+0x1a5/0x410
[<
ffffffffb13be5c8>] __driver_probe_device+0x78/0x180
[<
ffffffffb13be6fe>] driver_probe_device+0x1e/0x90
[<
ffffffffb13be972>] __driver_attach+0xd2/0x1c0
[<
ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0
[<
ffffffffb13bd2a2>] bus_add_driver+0x112/0x210
[<
ffffffffb13bfc6c>] driver_register+0x5c/0x120
[<
ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore]
[<
ffffffffb0c011c4>] do_one_initcall+0x44/0x220
[<
ffffffffb0d6134c>] do_init_module+0x4c/0x220
Fix this by freeing the channel surveys on device removal.
Tested with a RT3070 based USB wireless adapter.
Fixes:
5447626910f5 ("rt2x00: save survey for every channel visited")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330215637.4332-1-W_Armin@gmx.de
Jiapeng Chong [Thu, 30 Mar 2023 02:18:41 +0000 (10:18 +0800)]
wifi: b43legacy: Remove the unused function prev_slot()
The function prev_slot is defined in the dma.c file, but not called
elsewhere, so remove this unused function.
drivers/net/wireless/broadcom/b43legacy/dma.c:130:19: warning: unused function 'prev_slot'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4642
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330021841.67724-1-jiapeng.chong@linux.alibaba.com
Cai Huoqing [Thu, 23 Mar 2023 11:26:13 +0000 (19:26 +0800)]
wifi: rtw89: Remove redundant pci_clear_master
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230323112613.7550-5-cai.huoqing@linux.dev
Ping-Ke Shih [Thu, 23 Mar 2023 08:28:39 +0000 (16:28 +0800)]
wifi: rtw89: fix potential race condition between napi_init and napi_enable
A race condition can happen if netdev is registered, but NAPI isn't
initialized yet, and meanwhile user space starts the netdev that will
enable NAPI. Then, it hits BUG_ON():
kernel BUG at net/core/dev.c:6423!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 417 Comm: iwd Not tainted 6.2.7-slab-dirty #3
eb0f5a8a9d91
Hardware name: LENOVO 21DL/LNVNB161216, BIOS JPCN20WW(V1.06) 09/20/2022
RIP: 0010:napi_enable+0x3f/0x50
Code: 48 89 c2 48 83 e2 f6 f6 81 89 08 00 00 02 74 0d 48 83 ...
RSP: 0018:
ffffada1414f3548 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
ffffa01425802080 RCX:
0000000000000000
RDX:
00000000000002ff RSI:
ffffada14e50c614 RDI:
ffffa01425808dc0
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000100 R12:
ffffa01425808f58
R13:
0000000000000000 R14:
ffffa01423498940 R15:
0000000000000001
FS:
00007f5577c0a740(0000) GS:
ffffa0169fc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f5577a19972 CR3:
0000000125a7a000 CR4:
0000000000750ef0
PKRU:
55555554
Call Trace:
<TASK>
rtw89_pci_ops_start+0x1c/0x70 [rtw89_pci
6cbc75429515c181cbc386478d5cfb32ffc5a0f8]
rtw89_core_start+0xbe/0x160 [rtw89_core
fe07ecb874820b6d778370d4acb6ef8a37847f22]
rtw89_ops_start+0x26/0x40 [rtw89_core
fe07ecb874820b6d778370d4acb6ef8a37847f22]
drv_start+0x42/0x100 [mac80211
c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_do_open+0x311/0x7d0 [mac80211
c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_open+0x6a/0x90 [mac80211
c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
__dev_open+0xe0/0x180
__dev_change_flags+0x1da/0x250
dev_change_flags+0x26/0x70
do_setlink+0x37c/0x12c0
? ep_poll_callback+0x246/0x290
? __nla_validate_parse+0x61/0xd00
? __wake_up_common_lock+0x8f/0xd0
To fix this, follow Jonas' suggestion to switch the order of these
functions and move register netdev to be the last step of PCI probe.
Also, correct the error handling of rtw89_core_register_hw().
Fixes:
e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Cc: stable@vger.kernel.org
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/linux-wireless/CAOiHx=n7EwK2B9CnBR07FVA=sEzFagb8TkS4XC_qBNq8OwcYUg@mail.gmail.com/T/#t
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Larry Finger<Larry.Finger@lwfinger.net>
Reviewed-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230323082839.20474-1-pkshih@realtek.com
Chih-Kang Chang [Wed, 22 Mar 2023 06:02:38 +0000 (14:02 +0800)]
wifi: rtw89: config EDCCA threshold during scan to prevent TX failed
Need to configure EDCCA threshold to default value before scan, and recall
original value after scan to prevent probe request can't be sent out.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230322060238.43922-1-pkshih@realtek.com
Chih-Kang Chang [Mon, 20 Mar 2023 09:31:12 +0000 (17:31 +0800)]
wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering
We use ppdu_sts to obtain channel information from hardware, to ensure
that the scan results have correct channel information. However, some of
ppdu_sts that is filtered by the to_self check is also needed for the scan
results. Therefore, we modify the filter part in front of CFO count.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320093112.30466-3-pkshih@realtek.com
Chin-Yen Lee [Mon, 20 Mar 2023 09:31:11 +0000 (17:31 +0800)]
wifi: rtw89: remove superfluous H2C of join_info
We find that when starting WoWLAN, the second join_info H2C is
unnecessary and leads WoWLAN not enter power save mode if using new
firmware, so remove it.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320093112.30466-2-pkshih@realtek.com
Chih-Kang Chang [Mon, 20 Mar 2023 09:31:10 +0000 (17:31 +0800)]
wifi: rtw89: set data lowest rate according to AP supported rate
By default the driver uses the 1M and 6M rate (0x0) for data frames in
2 GHz and 5/6 GHz bands respectively. But the rate that might not AP
supported. Therefore, We modify the data lowest rate according to the
lowest of AP supported rate.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320093112.30466-1-pkshih@realtek.com
Ping-Ke Shih [Thu, 16 Mar 2023 06:39:56 +0000 (14:39 +0800)]
wifi: rtw89: add counters of register-based H2C/C2H
The register-based H2C/C2H are used to exchange information between driver
and firmware, but only apply to narrow area because its data size is
smaller than regular packet-based H2C/C2H.
This kind of H2C/C2H must be paired. To identify if any H2C/C2H is missing,
update counters to help diagnose this kind of problems.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230316063956.71687-1-pkshih@realtek.com
Ching-Te Ku [Tue, 14 Mar 2023 02:06:17 +0000 (10:06 +0800)]
wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1
Update driver with the supported firmware version of the below item.
Bluetooth firmware BT_Coex_Ver: 0x07
Wi-Fi firmware version:
RTL8852C->v0.27.56.10
RTL8852A->v0.24.36
RTL8852B->v0.29.29
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230314020617.28193-6-pkshih@realtek.com
Ching-Te Ku [Tue, 14 Mar 2023 02:06:16 +0000 (10:06 +0800)]
wifi: rtw89: coex: Add report control v5 variation
In order to reduce firmware code size cost, remove some counter value from
the structure. But firmware didn't update version code. To parse the
correct report, add another variation version v105 to parse it.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230314020617.28193-5-pkshih@realtek.com
Ching-Te Ku [Tue, 14 Mar 2023 02:06:15 +0000 (10:06 +0800)]
wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter
The LNA gain didn't set before, it will lead some WiFi RX issue.
And the setting can increase both of WiFi & BT performance while
they are both RX.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230314020617.28193-4-pkshih@realtek.com
Ching-Te Ku [Tue, 14 Mar 2023 02:06:14 +0000 (10:06 +0800)]
wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving
If driver enable firmware report during WiFi power saving, the
firmware timer will lead to some power saving issue like,
fail to enter LPS, can not leave LPS or some unexpected issue.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230314020617.28193-3-pkshih@realtek.com
Ching-Te Ku [Tue, 14 Mar 2023 02:06:13 +0000 (10:06 +0800)]
wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B
This LPS state will not turn off RF, and it can still do some basic
traffic, only RTL8852B has the state. Coexistence need let Bluetooth
know WiFi is still alive to prevent some Bluetooth performance issue.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230314020617.28193-2-pkshih@realtek.com
David S. Miller [Mon, 3 Apr 2023 09:13:01 +0000 (10:13 +0100)]
Merge branch 'mt7988-support'
Daniel Golle says:
====================
net: dsa: add support for MT7988
The MediaTek MT7988 SoC comes with a built-in switch very similar to
previous MT7530 and MT7531. However, the switch address space is mapped
into the SoCs memory space rather than being connected via MDIO.
Using MMIO simplifies register access and also removes the need for a bus
lock, and for that reason also makes interrupt handling more light-weight.
Note that this is different from previous SoCs like MT7621 and MT7623N
which also came with an integrated MT7530-like switch which yet had to be
accessed via MDIO.
Split-off the part of the driver registering an MDIO driver, then add
another module acting as MMIO/platform driver.
The whole series has been tested on various MediaTek boards:
* MT7623A + MT7530 (BPi-R2)
* MT7986A + MT7531 (BPi-R3)
* MT7988A reference board
Changes since v1:
* use 'internal' PHY mode where appropriate
* use regmap_update_bits in mt7530_rmw
* improve dt-bindings
Changes since RFC v3:
* WARN_ON_ONCE if register read fails
* move probing of the reset GPIO and reset controller link out of
common probe function, as they are not actually common
Changes since RFC v2:
* split into many small commits to ease review
* introduce helper functions to reduce code duplication
* use helpers for locking to make lock-skipping easier and less ugly
to implement.
* add dt-bindings for mediatek,mt7988-switch
Changes since initial RFC:
* use regmap for register access and move register access to bus-
specific driver
* move initialization of MT7531 SGMII PCS to MDIO driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:19:51 +0000 (02:19 +0100)]
dt-bindings: net: dsa: mediatek,mt7530: add mediatek,mt7988-switch
Add documentation for the built-in switch which can be found in the
MediaTek MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:19:40 +0000 (02:19 +0100)]
net: dsa: mt7530: introduce driver for MT7988 built-in switch
Add driver for the built-in Gigabit Ethernet switch which can be found
in the MediaTek MT7988 SoC.
The switch shares most of its design with MT7530 and MT7531, but has
it's registers mapped into the SoCs register space rather than being
connected externally or internally via MDIO.
Introduce a new platform driver to support that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:19:28 +0000 (02:19 +0100)]
net: dsa: mt7530: skip locking if MDIO bus isn't present
As MT7530 and MT7531 internally use 32-bit wide registers, each access
to any register of the switch requires several operations on the MDIO
bus. Hence if there is congruent access, e.g. due to PCS or PHY
polling, this can mess up and interfere with another ongoing register
access sequence.
However, the MDIO bus mutex is only relevant for MDIO-connected
switches. Prepare switches which have there registers directly mapped
into the SoCs register space via MMIO which do not require such
locking. There we can simply use regmap's default locking mechanism.
Hence guard mutex operations to only be performed in case of MDIO
connected switches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:19:13 +0000 (02:19 +0100)]
net: dsa: mt7530: introduce separate MDIO driver
Split MT7530 switch driver into a common part and a part specific
for MDIO connected switches and multi-chip modules.
Move MDIO-specific functions to newly introduced mt7530-mdio.c while
keeping the common parts in mt7530.c.
Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is
implied by CONFIG_NET_DSA_MT7530.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:19:02 +0000 (02:19 +0100)]
net: dsa: mt7530: split-off common parts from mt7531_setup
MT7988 shares a significant part of the setup function with MT7531.
Split-off those parts into a shared function which is going to be used
also by mt7988_setup.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:18:50 +0000 (02:18 +0100)]
net: dsa: mt7530: introduce mt7530_remove_common helper function
Move commonly used parts from mt7530_remove into new
mt7530_remove_common helper function which will be used by both,
mt7530_remove and the to-be-introduced mt7988_remove.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:18:39 +0000 (02:18 +0100)]
net: dsa: mt7530: introduce mt7530_probe_common helper function
Move commonly used parts from mt7530_probe into new mt7530_probe_common
helper function which will be used by both, mt7530_probe and the
to-be-introduced mt7988_probe.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:18:28 +0000 (02:18 +0100)]
net: dsa: mt7530: move p5_intf_modes() function to mt7530.c
In preparation of splitting mt7530.c into a driver for MDIO-connected
as well as MDIO-accessed built-in switches on one hand and MMIO-accessed
built-in switches move the p5_inft_modes() function from mt7530.h to
mt7530.c. The function is only needed there and will trigger a compiler
warning about a defined but unused function otherwise when including
mt7530.h in the to-be-introduced bus-specific drivers.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:18:16 +0000 (02:18 +0100)]
net: dsa: mt7530: introduce mutex helpers
As the MDIO bus lock only needs to be involved if actually operating
on an MDIO-connected switch we will need to skip locking for built-in
switches which are accessed via MMIO.
Create helper functions which simplify that upcoming change.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:18:04 +0000 (02:18 +0100)]
net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function
Move creating the SGMII PCS from mt753x_setup() to the more appropriate
mt7530_probe() function.
This is done also in preparation of moving all functions related to
MDIO-connected MT753x switches to a separate module.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:17:52 +0000 (02:17 +0100)]
net: dsa: mt7530: use regmap to access switch register space
Use regmap API to access the switch register space.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:17:40 +0000 (02:17 +0100)]
net: dsa: mt7530: use unlocked regmap accessors
Instead of wrapping the locked register accessor functions, use the
unlocked variants and add locking wrapper functions to let regmap
handle the locking.
This is a preparation towards being able to always use regmap to
access switch registers instead of open-coded accessor functions.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:17:30 +0000 (02:17 +0100)]
net: dsa: mt7530: refactor SGMII PCS creation
Instead of macro templates use a dedidated function and allocated
regmap_config when creating the regmaps for the pcs-mtk-lynxi
instances.
This is in preparation to switching to use unlocked regmap accessors
and have regmap's locking API handle locking for us.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Mon, 3 Apr 2023 01:17:19 +0000 (02:17 +0100)]
net: dsa: mt7530: make some noise if register read fails
Simply returning the negative error value instead of the read value
doesn't seem like a good idea. Return 0 instead and add WARN_ON_ONCE(1)
so this kind of error will not go unnoticed.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Apr 2023 09:08:43 +0000 (10:08 +0100)]
Merge branch 'phy-smsc-edpd-tunable'
Heiner Kallweit says:
====================
net: phy: smsc: add support for edpd tunable
This adds support for the EDPD PHY tunable.
Per default EDPD is disabled in interrupt mode, the tunable can be used
to override this, e.g. if the link partner doesn't use EDPD.
The interval to check for energy can be chosen between 1000ms and
2000ms. Note that this value consists of the 1000ms phylib interval
for state machine runs plus the time to wait for energy being detected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 2 Apr 2023 15:17:35 +0000 (17:17 +0200)]
net: phy: smsc: enable edpd tunable support
Enable EDPD PHY tunable support for all drivers using
lan87xx_read_status.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 2 Apr 2023 15:16:56 +0000 (17:16 +0200)]
net: phy: smsc: add support for edpd tunable
This adds support for the EDPD PHY tunable.
Per default EDPD is disabled in interrupt mode, the tunable can be used
to override this, e.g. if the link partner doesn't use EDPD.
The interval to check for energy can be chosen between 1000ms and
2000ms. Note that this value consists of the 1000ms phylib interval
for state machine runs plus the time to wait for energy being detected.
v2:
- consider that phylib core holds phydev->lock when calling the
phy tunable hooks
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 2 Apr 2023 15:14:35 +0000 (17:14 +0200)]
net: phy: smsc: prepare for making edpd wait period configurable
Add a member edpd_max_wait_ms to the private data structure in preparation
of making the wait period configurable by supporting the edpd phy tunable.
v2:
- rename constant to EDPD_MAX_WAIT_DFLT_MS
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 2 Apr 2023 15:13:35 +0000 (17:13 +0200)]
net: phy: smsc: add flag edpd_mode_set_by_user
Add flag edpd_mode_set_by_user in preparation of adding edpd phy tunable
support. This flag will allow users to override the default behavior
of edpd being disabled if interrupt mode is used.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 2 Apr 2023 15:13:05 +0000 (17:13 +0200)]
net: phy: smsc: clear edpd_enable if interrupt mode is used
Clear edpd_enable if interupt mode is used, this avoids
having to check for PHY_POLL multiple times.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 2 Apr 2023 15:12:20 +0000 (17:12 +0200)]
net: phy: smsc: add helper smsc_phy_config_edpd
Add helper smsc_phy_config_edpd() and explicitly clear bit
MII_LAN83C185_EDPWRDOWN is edpd_enable isn't set.
Boot loader may have left whatever value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 2 Apr 2023 15:11:40 +0000 (17:11 +0200)]
net: phy: smsc: rename flag energy_enable
Rename the flag to edpd_enable, as we're not enabling energy but
edpd (energy detect power down) mode. In addition change the
type to a bit field member in preparation of adding further flags.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Apr 2023 09:04:27 +0000 (10:04 +0100)]
Merge branch 'dsa_master_ioctl-notifier'
Vladimir Oltean says:
====================
net: Convert dsa_master_ioctl() to netdev notifier
This is preparatory work in order for Maxim Georgiev to be able to start
the API conversion process of hardware timestamping from ndo_eth_ioctl()
to ndo_hwtstamp_set():
https://lore.kernel.org/netdev/
20230331045619.40256-1-glipus@gmail.com/
In turn, Maxim Georgiev's work is a preparation so that Köry Maincent is
able to make the active hardware timestamping layer selectable by user
space.
https://lore.kernel.org/netdev/
20230308135936.761794-1-kory.maincent@bootlin.com/
So, quite some dependency chain.
Before this patch set, DSA prevented the conversion of any networking
driver from the ndo_eth_ioctl() API to the ndo_hwtstamp_set() API,
because it wanted to validate the hwtstamping settings on the DSA
master, and it was only coded up to do this using the old API.
After this patch set, a new netdev notifier exists, which does not
depend on anything that would constitute the "soon-to-be-legacy" API,
but rather, it uses a newly introduced struct kernel_hwtstamp_config,
and it doesn't issue any ioctl at all, being thus compatible both with
ndo_eth_ioctl(), and with the not-yet-introduced, but now possible,
ndo_hwtstamp_set().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 2 Apr 2023 12:37:55 +0000 (15:37 +0300)]
net: create a netdev notifier for DSA to reject PTP on DSA master
The fact that PTP 2-step TX timestamping is broken on DSA switches if
the master also timestamps the same packets is documented by commit
f685e609a301 ("net: dsa: Deny PTP on master if switch supports it").
We attempt to help the users avoid shooting themselves in the foot by
making DSA reject the timestamping ioctls on an interface that is a DSA
master, and the switch tree beneath it contains switches which are aware
of PTP.
The only problem is that there isn't an established way of intercepting
ndo_eth_ioctl calls, so DSA creates avoidable burden upon the network
stack by creating a struct dsa_netdevice_ops with overlaid function
pointers that are manually checked from the relevant call sites. There
used to be 2 such dsa_netdevice_ops, but now, ndo_eth_ioctl is the only
one left.
There is an ongoing effort to migrate driver-visible hardware timestamping
control from the ndo_eth_ioctl() based API to a new ndo_hwtstamp_set()
model, but DSA actively prevents that migration, since dsa_master_ioctl()
is currently coded to manually call the master's legacy ndo_eth_ioctl(),
and so, whenever a network device driver would be converted to the new
API, DSA's restrictions would be circumvented, because any device could
be used as a DSA master.
The established way for unrelated modules to react on a net device event
is via netdevice notifiers. So we create a new notifier which gets
called whenever there is an attempt to change hardware timestamping
settings on a device.
Finally, there is another reason why a netdev notifier will be a good
idea, besides strictly DSA, and this has to do with PHY timestamping.
With ndo_eth_ioctl(), all MAC drivers must manually call
phy_has_hwtstamp() before deciding whether to act upon SIOCSHWTSTAMP,
otherwise they must pass this ioctl to the PHY driver via
phy_mii_ioctl().
With the new ndo_hwtstamp_set() API, it will be desirable to simply not
make any calls into the MAC device driver when timestamping should be
performed at the PHY level.
But there exist drivers, such as the lan966x switch, which need to
install packet traps for PTP regardless of whether they are the layer
that provides the hardware timestamps, or the PHY is. That would be
impossible to support with the new API.
The proposal there, too, is to introduce a netdev notifier which acts as
a better cue for switching drivers to add or remove PTP packet traps,
than ndo_hwtstamp_set(). The one introduced here "almost" works there as
well, except for the fact that packet traps should only be installed if
the PHY driver succeeded to enable hardware timestamping, whereas here,
we need to deny hardware timestamping on the DSA master before it
actually gets enabled. This is why this notifier is called "PRE_", and
the notifier that would get used for PHY timestamping and packet traps
would be called NETDEV_CHANGE_HWTSTAMP. This isn't a new concept, for
example NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER do the same thing.
In expectation of future netlink UAPI, we also pass a non-NULL extack
pointer to the netdev notifier, and we make DSA populate it with an
informative reason for the rejection. To avoid making it go to waste, we
make the ioctl-based dev_set_hwtstamp() create a fake extack and print
the message to the kernel log.
Link: https://lore.kernel.org/netdev/20230401191215.tvveoi3lkawgg6g4@skbuf/
Link: https://lore.kernel.org/netdev/20230310164451.ls7bbs6pdzs4m6pw@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 2 Apr 2023 12:37:54 +0000 (15:37 +0300)]
net: dsa: make dsa_port_supports_hwtstamp() construct a fake ifreq
dsa_master_ioctl() is in the process of getting converted to a different
API, where we won't have access to a struct ifreq * anymore, but rather,
to a struct kernel_hwtstamp_config.
Since ds->ops->port_hwtstamp_get() still uses struct ifreq *, this
creates a difficult situation where we have to make up such a dummy
pointer.
The conversion is a bit messy, because it forces a "good" implementation
of ds->ops->port_hwtstamp_get() to return -EFAULT in copy_to_user()
because of the NULL ifr->ifr_data pointer. However, it works, and it is
only a transient step until ds->ops->port_hwtstamp_get() gets converted
to the new API which passes struct kernel_hwtstamp_config and does not
call copy_to_user().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 2 Apr 2023 12:37:53 +0000 (15:37 +0300)]
net: add struct kernel_hwtstamp_config and make net_hwtstamp_validate() use it
Jakub Kicinski suggested that we may want to add new UAPI for
controlling hardware timestamping through netlink in the future, and in
that case, we will be limited to the struct hwtstamp_config that is
currently passed in fixed binary format through the SIOCGHWTSTAMP and
SIOCSHWTSTAMP ioctls. It would be good if new kernel code already
started operating on an extensible kernel variant of that structure,
similar in concept to struct kernel_ethtool_coalesce vs struct
ethtool_coalesce.
Since struct hwtstamp_config is in include/uapi/linux/net_tstamp.h, here
we introduce include/linux/net_tstamp.h which shadows that other header,
but also includes it, so that existing includers of this header work as
before. In addition to that, we add the definition for the kernel-only
structure, and a helper which translates all fields by manual copying.
I am doing a manual copy in order to not force the alignment (or type)
of the fields of struct kernel_hwtstamp_config to be the same as of
struct hwtstamp_config, even though now, they are the same.
Link: https://lore.kernel.org/netdev/20230330223519.36ce7d23@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 2 Apr 2023 12:37:52 +0000 (15:37 +0300)]
net: move copy_from_user() out of net_hwtstamp_validate()
The kernel will want to start using the more meaningful struct
hwtstamp_config pointer in more places, so move the copy_from_user() at
the beginning of dev_set_hwtstamp() in order to get to that, and pass
this argument to net_hwtstamp_validate().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 2 Apr 2023 12:37:51 +0000 (15:37 +0300)]
net: promote SIOCSHWTSTAMP and SIOCGHWTSTAMP ioctls to dedicated handlers
DSA does not want to intercept all ioctls handled by dev_eth_ioctl(),
only SIOCSHWTSTAMP. This can be seen from commit
f685e609a301 ("net:
dsa: Deny PTP on master if switch supports it"). However, the way in
which the dsa_ndo_eth_ioctl() is called would suggest otherwise.
Split the handling of SIOCSHWTSTAMP and SIOCGHWTSTAMP ioctls into
separate case statements of dev_ifsioc(), and make each one call its own
sub-function. This also removes the dsa_ndo_eth_ioctl() call from
dev_eth_ioctl(), which from now on exclusively handles PHY ioctls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 2 Apr 2023 12:37:50 +0000 (15:37 +0300)]
net: simplify handling of dsa_ndo_eth_ioctl() return code
In the expression "x == 0 || x != -95", the term "x == 0" does not
change the expression's logical value, because 0 != -95, and so,
if x is 0, the expression would still be true by virtue of the second
term. If x is non-zero, the expression depends on the truth value of
the second term anyway. As such, the first term is redundant and can
be deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 2 Apr 2023 12:37:49 +0000 (15:37 +0300)]
net: don't abuse "default" case for unknown ioctl in dev_ifsioc()
The "switch (cmd)" block from dev_ifsioc() gained a bit too much
unnecessary manual handling of "cmd" in the "default" case, starting
with the private ioctls.
Clean that up by using the "ellipsis" gcc extension, adding separate
cases for the rest of the ioctls, and letting the default case only
return -EINVAL.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Fri, 31 Mar 2023 20:55:45 +0000 (16:55 -0400)]
net: alteon: remove unused len variable
clang with W=1 reports
drivers/net/ethernet/alteon/acenic.c:2438:10: error: variable
'len' set but not used [-Werror,-Wunused-but-set-variable]
int i, len = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 2 Apr 2023 12:42:30 +0000 (13:42 +0100)]
Merge branch 'mlxsw-transceiver-trip-points'
Petr Machata says:
====================
mlxsw: Use static trip points for transceiver modules
Ido Schimmel writes:
See patch #1 for motivation and implementation details.
Patches #2-#3 are simple cleanups as a result of the changes in the
first patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 31 Mar 2023 14:17:32 +0000 (16:17 +0200)]
mlxsw: core_thermal: Simplify transceiver module get_temp() callback
The get_temp() callback of a thermal zone associated with a transceiver
module no longer needs to read the temperature thresholds of the module.
Therefore, simplify the callback by only reading the temperature.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 31 Mar 2023 14:17:31 +0000 (16:17 +0200)]
mlxsw: core_thermal: Make mlxsw_thermal_module_init() void
The function can no longer fail so make it void and remove the
associated error path.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 31 Mar 2023 14:17:30 +0000 (16:17 +0200)]
mlxsw: core_thermal: Use static trip points for transceiver modules
The driver registers a thermal zone for each transceiver module and
tries to set the trip point temperatures according to the thresholds
read from the transceiver. If a threshold cannot be read or if a
transceiver is unplugged, the trip point temperature is set to zero,
which means that it is disabled as far as the thermal subsystem is
concerned.
A recent change in the thermal core made it so that such trip points are
no longer marked as disabled, which lead the thermal subsystem to
incorrectly set the associated cooling devices to the their maximum
state [1]. A fix to restore this behavior was merged in commit
f1b80a3878b2 ("thermal: core: Restore behavior regarding invalid trip
points"). However, the thermal maintainer suggested to not rely on this
behavior and instead always register a valid array of trip points [2].
Therefore, create a static array of trip points with sane defaults
(suggested by Vadim) and register it with the thermal zone of each
transceiver module. User space can choose to override these defaults
using the thermal zone sysfs interface since these files are writeable.
Before:
$ cat /sys/class/thermal/thermal_zone11/type
mlxsw-module11
$ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
65000
75000
80000
After:
$ cat /sys/class/thermal/thermal_zone11/type
mlxsw-module11
$ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
55000
65000
80000
Also tested by reverting commit
f1b80a3878b2 ("thermal: core: Restore
behavior regarding invalid trip points") and making sure that the
associated cooling devices are not set to their maximum state.
[1] https://lore.kernel.org/linux-pm/ZA3CFNhU4AbtsP4G@shredder/
[2] https://lore.kernel.org/linux-pm/
f78e6b70-a963-c0ca-a4b2-
0d4c6aeef1fb@linaro.org/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 31 Mar 2023 04:47:31 +0000 (21:47 -0700)]
net: minor reshuffle of napi_struct
napi_id is read by GRO and drivers to mark skbs, and it currently
sits at the end of the structure, in a mostly unused cache line.
Move it up into a hole, and separate the clearly control path
fields from the important ones.
Before:
struct napi_struct {
struct list_head poll_list; /* 0 16 */
long unsigned int state; /* 16 8 */
int weight; /* 24 4 */
int defer_hard_irqs_count; /* 28 4 */
long unsigned int gro_bitmask; /* 32 8 */
int (*poll)(struct napi_struct *, int); /* 40 8 */
int poll_owner; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
struct net_device * dev; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct gro_list gro_hash[8]; /* 64 192 */
/* --- cacheline 4 boundary (256 bytes) --- */
struct sk_buff * skb; /* 256 8 */
struct list_head rx_list; /* 264 16 */
int rx_count; /* 280 4 */
/* XXX 4 bytes hole, try to pack */
struct hrtimer timer; /* 288 64 */
/* XXX last struct has 4 bytes of padding */
/* --- cacheline 5 boundary (320 bytes) was 32 bytes ago --- */
struct list_head dev_list; /* 352 16 */
struct hlist_node napi_hash_node; /* 368 16 */
/* --- cacheline 6 boundary (384 bytes) --- */
unsigned int napi_id; /* 384 4 */
/* XXX 4 bytes hole, try to pack */
struct task_struct * thread; /* 392 8 */
/* size: 400, cachelines: 7, members: 17 */
/* sum members: 388, holes: 3, sum holes: 12 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 16 bytes */
};
After:
struct napi_struct {
struct list_head poll_list; /* 0 16 */
long unsigned int state; /* 16 8 */
int weight; /* 24 4 */
int defer_hard_irqs_count; /* 28 4 */
long unsigned int gro_bitmask; /* 32 8 */
int (*poll)(struct napi_struct *, int); /* 40 8 */
int poll_owner; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
struct net_device * dev; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct gro_list gro_hash[8]; /* 64 192 */
/* --- cacheline 4 boundary (256 bytes) --- */
struct sk_buff * skb; /* 256 8 */
struct list_head rx_list; /* 264 16 */
int rx_count; /* 280 4 */
unsigned int napi_id; /* 284 4 */
struct hrtimer timer; /* 288 64 */
/* XXX last struct has 4 bytes of padding */
/* --- cacheline 5 boundary (320 bytes) was 32 bytes ago --- */
struct task_struct * thread; /* 352 8 */
struct list_head dev_list; /* 360 16 */
struct hlist_node napi_hash_node; /* 376 16 */
/* size: 392, cachelines: 7, members: 17 */
/* sum members: 388, holes: 1, sum holes: 4 */
/* paddings: 1, sum paddings: 4 */
/* forced alignments: 1 */
/* last cacheline: 8 bytes */
} __attribute__((__aligned__(8)));
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sylwester Dziedziuch [Thu, 30 Mar 2023 17:00:22 +0000 (10:00 -0700)]
i40e: Add support for VF to specify its primary MAC address
Currently in the i40e driver there is no implementation of different
MAC address handling depending on whether it is a legacy or primary.
Introduce new checks for VF to be able to specify its primary MAC
address based on the VIRTCHNL_ETHER_ADDR_PRIMARY type.
Primary MAC address are treated differently compared to legacy
ones in a scenario where:
1. If a unicast MAC is being added and it's specified as
VIRTCHNL_ETHER_ADDR_PRIMARY, then replace the current
default_lan_addr.addr.
2. If a unicast MAC is being deleted and it's type
is specified as VIRTCHNL_ETHER_ADDR_PRIMARY, then zero the
hw_lan_addr.addr.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 1 Apr 2023 04:41:11 +0000 (21:41 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-30 (documentation, ice)
This series contains updates to driver documentation and the ice driver.
Tony removes links and addresses related to the out-of-tree driver from the
Intel ethernet driver documentation.
Jake removes a comment that is no longer valid to the ice driver.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove comment about not supporting driver reinit
Documentation/eth/intel: Remove references to SourceForge
Documentation/eth/intel: Update address for driver support
====================
Link: https://lore.kernel.org/r/20230330165935.2503604-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 31 Mar 2023 17:39:33 +0000 (10:39 -0700)]
Merge tag 'nf-next-2023-03-30' of https://git./linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
1. No need to disable BH in nfnetlink proc handler, freeing happens
via call_rcu.
2. Expose classid in nfetlink_queue, from Eric Sage.
3. Fix nfnetlink message description comments, from Matthieu De Beule.
4. Allow removal of offloaded connections via ctnetlink, from Paul Blakey.
* tag 'nf-next-2023-03-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: ctnetlink: Support offloaded conntrack entry deletion
netfilter: Correct documentation errors in nf_tables.h
netfilter: nfnetlink_queue: enable classid socket info retrieval
netfilter: nfnetlink_log: remove rcu_bh usage
====================
Link: https://lore.kernel.org/r/20230331104809.2959-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Peng Fan [Tue, 28 Mar 2023 06:15:18 +0000 (14:15 +0800)]
dt-bindings: net: fec: add power-domains property
Add optional power domains property
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230328061518.1985981-1-peng.fan@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Fri, 24 Mar 2023 19:06:47 +0000 (15:06 -0400)]
bcma: remove unused mips_read32 function
clang with W=1 reports
drivers/bcma/driver_mips.c:49:19: error: unused function
'mips_read32' [-Werror,-Wunused-function]
static inline u32 mips_read32(struct bcma_drv_mips *mcore,
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230324190647.2654293-1-trix@redhat.com
Rob Herring [Sun, 19 Mar 2023 16:31:59 +0000 (11:31 -0500)]
bcma: Use of_address_to_resource()
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230319163159.225773-1-robh@kernel.org
Tom Rix [Wed, 29 Mar 2023 13:14:44 +0000 (09:14 -0400)]
wifi: mwifiex: remove unused evt_buf variable
clang with W=1 reports
drivers/net/wireless/marvell/mwifiex/11h.c:198:6: error: variable
'evt_buf' set but not used [-Werror,-Wunused-but-set-variable]
u8 *evt_buf;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230329131444.1809018-1-trix@redhat.com
Tom Rix [Mon, 27 Mar 2023 15:11:51 +0000 (11:11 -0400)]
wifi: brcmsmac: ampdu: remove unused suc_mpdu variable
clang with W=1 reports
drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:848:5: error: variable
'suc_mpdu' set but not used [-Werror,-Wunused-but-set-variable]
u8 suc_mpdu = 0, tot_mpdu = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230327151151.1771350-1-trix@redhat.com
Wei Chen [Sun, 26 Mar 2023 05:42:17 +0000 (05:42 +0000)]
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
If there is a failure during copy_from_user or user-provided data buffer is
invalid, rtl_debugfs_set_write_reg should return negative error code instead
of a positive value count.
Fix this bug by returning correct error code. Moreover, the check of buffer
against null is removed since it will be handled by copy_from_user.
Fixes:
610247f46feb ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230326054217.93492-1-harperchen1110@gmail.com
Wei Chen [Sun, 26 Mar 2023 05:31:38 +0000 (05:31 +0000)]
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
If there is a failure during copy_from_user or user-provided data buffer
is invalid, rtl_debugfs_set_write_rfreg should return negative error code
instead of a positive value count.
Fix this bug by returning correct error code. Moreover, the check of buffer
against null is removed since it will be handled by copy_from_user.
Fixes:
610247f46feb ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230326053138.91338-1-harperchen1110@gmail.com
Tom Rix [Sat, 25 Mar 2023 13:03:43 +0000 (09:03 -0400)]
wifi: brcmsmac: remove unused has_5g variable
clang with W=1 reports
drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c:1051:6: error:
variable 'has_5g' set but not used [-Werror,-Wunused-but-set-variable]
int has_5g = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230325130343.1334209-1-trix@redhat.com
Tom Rix [Fri, 24 Mar 2023 13:50:22 +0000 (09:50 -0400)]
wifi: b43legacy: remove unused freq_r3A_value function
clang with W=1 reports
drivers/net/wireless/broadcom/b43legacy/radio.c:1713:5: error:
unused function 'freq_r3A_value' [-Werror,-Wunused-function]
u16 freq_r3A_value(u16 frequency)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230324135022.2649735-1-trix@redhat.com
Gustavo A. R. Silva [Fri, 24 Mar 2023 01:11:35 +0000 (19:11 -0600)]
wifi: rtlwifi: Replace fake flex-array with flex-array member
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
In function ‘fortify_memset_chk’,
inlined from ‘rtl_usb_probe’ at drivers/net/wireless/realtek/rtlwifi/usb.c:1044:2:
./include/linux/fortify-string.h:430:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
430 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/277
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ZBz4x+MWoI/f65o1@work