Ulrich Weigand [Fri, 12 Oct 2007 16:13:20 +0000 (16:13 +0000)]
* alpha-mdebug-tdep.c: Include "gdb_string.h".
(find_proc_desc): Add fix-up code for setjmp procedure descriptor.
* mdebugread.c (parse_procedure): Remove setjmp fix-up code.
* Makefile.in (alpha-mdebug-tdep.o): Update dependencies.
* config/alpha/alpha.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/alpha-linux.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/alpha-osf1.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/fbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/tm-alpha.h: Remove file.
Ulrich Weigand [Fri, 12 Oct 2007 16:11:12 +0000 (16:11 +0000)]
* breakpoint.c (breakpoint_sals_to_pc): Do not check for
DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE.
* config/pa/tm-hppa.h: Delete file.
* config/pa/hppa64.mt: Do not set DEPRECATED_TM_FILE.
* config/pa/hppahpux.mt: Likewise.
* config/pa/hppa.mt: Likewise.
* config/pa/linux.mt: Likewise.
* hppa-tdep.c (hppa_pc_requires_run_before_use): Delete.
Nick Clifton [Fri, 12 Oct 2007 16:11:02 +0000 (16:11 +0000)]
* elf32-cr16.c (elf32_cr16_relax_section): Fix condition check typo.
* config/tc-cr16.c: Update the md_relax_table for 1 word b<cc> instruction range information.
Daniel Jacobowitz [Fri, 12 Oct 2007 15:59:19 +0000 (15:59 +0000)]
* elfxx-mips.c (mips_elf_sort_hash_table_f): Handle forced
local symbols specially.
(mips_elf_set_global_got_offset): Skip forced local symbols.
Ulrich Weigand [Fri, 12 Oct 2007 15:49:07 +0000 (15:49 +0000)]
* config/arm/nm-nbsdaout.h: Remove file.
* config/nm-nbsdaout.h: Likewise.
* config/nm-nbsd.h: Likewise.
Ulrich Weigand [Fri, 12 Oct 2007 15:34:45 +0000 (15:34 +0000)]
* block.h (struct block): Remove "gcc_compile_flag" member.
(BLOCK_GCC_COMPILED): Remove.
* block.c (allocate_block): Do not clear BLOCK_GCC_COMPILED.
* buildsym.c (finish_block): Do not set it.
* symmisc.c (dump_symtab_1): Do not dump it.
* value.h (using_struct_return): Remove "gcc_p" argument.
* value.c (using_struct_return): Likewise.
* eval.c (evaluate_subexp_standard): Adapt callers.
* infcall.c (call_function_by_hand): Likewise.
* stack.c (return_command): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.
* gdbarch.sh (push_dummy_code): Remove "using_gcc" parameter.
* gdbarch.c, gdbarch.h: Regenerate.
* cris-tdep.c (cris_push_dummy_code): Adapt prototype.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.
* infcall.c (generic_push_dummy_code, push_dummy_code): Likewise.
(push_dummy_code, call_function_by_hand): Adapt callers.
Ulrich Weigand [Fri, 12 Oct 2007 15:32:50 +0000 (15:32 +0000)]
* infcmd.c (print_return_value): Remove STRUCT_RETURN argument.
(finish_command_continuation, finish_command): Adapt callers.
Ulrich Weigand [Fri, 12 Oct 2007 15:31:42 +0000 (15:31 +0000)]
* infcall.c (call_function_by_hand): Remove special handling
for HP aCC compiled code.
Ulrich Weigand [Fri, 12 Oct 2007 15:30:05 +0000 (15:30 +0000)]
* cris-tdep.c (cris_push_dummy_call): Support arguments passed by
reference. Fix endianness bugs.
(cris_reg_struct_has_address): Remove.
(cris_gdbarch_init): Remove set_gdbarch_deprecated_reg_struct_has_addr
and set_gdbarch_deprecated_use_struct_convention calls.
* gdbarch.sh (deprecated_reg_struct_has_addr): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* infcall.c (call_function_by_hand): Remove handling of
deprecated_reg_struct_has_addr.
doc/ChangeLog:
* gdbint.texi (Target Conditionals): Remove documentation of
and references to DEPRECATED_REG_STRUCT_HAS_ADDR.
Daniel Jacobowitz [Fri, 12 Oct 2007 14:00:31 +0000 (14:00 +0000)]
* doc/as.texinfo (Object Attributes): New chapter.
(Pseudo Ops): Document .gnu_attribute.
(LNS directives): Correct .loc_mark_labels documentation.
Ian Lance Taylor [Fri, 12 Oct 2007 06:06:34 +0000 (06:06 +0000)]
Add an option for Stringpools to not copy strings.
Ian Lance Taylor [Fri, 12 Oct 2007 06:00:55 +0000 (06:00 +0000)]
From Craig Silverstein: improve x86_64 TLS support.
Ian Lance Taylor [Fri, 12 Oct 2007 05:51:25 +0000 (05:51 +0000)]
Add --stats option to print runtime and memory usage statistics.
Alan Modra [Fri, 12 Oct 2007 04:38:29 +0000 (04:38 +0000)]
* ld-srec/srec.exp: Define __stack_chk_fail sym.
Alan Modra [Fri, 12 Oct 2007 03:34:45 +0000 (03:34 +0000)]
* elf.c (elfcore_grok_prxfpreg): Fix comment typo.
Alan Modra [Fri, 12 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 12 Oct 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Daniel Jacobowitz [Thu, 11 Oct 2007 20:32:36 +0000 (20:32 +0000)]
* Makefile.def (dependencies): Add all-gdb -> all-libdecnumber.
* Makefile.in: Regenerate.
Nick Clifton [Thu, 11 Oct 2007 20:20:55 +0000 (20:20 +0000)]
* config/obj-elf.c (obj_elf_section): When pushing a section, if there is a
comma then the following argument must be a subsection number.
* testsuite/gas/elf/elf.exp (run_elf_list_test): Run section6 test.
* testsuite/gas/elf/section6.s: New file: Check behaviour of .pushsection with a subsection argument.
* testsuite/gas/elf/section6.d: New file: Expected disassembly.
Kazu Hirata [Thu, 11 Oct 2007 20:19:37 +0000 (20:19 +0000)]
* breakpoint.c (do_enable_breakpoint): Delay enabling until after
checking watchpoint resources.
Kazu Hirata [Thu, 11 Oct 2007 20:12:04 +0000 (20:12 +0000)]
gdb/
* memattr.c (inaccessible_by_default): Change the initial
value to 1.
gdb/doc/
* gdb.texinfo: Mention that inaccessible-by-default is on by
default.
Kazu Hirata [Thu, 11 Oct 2007 20:08:01 +0000 (20:08 +0000)]
* lib/gdb.exp (gdb_load_cmd): Print out $loadtimeout instead
of $timeout.
Daniel Jacobowitz [Thu, 11 Oct 2007 19:48:02 +0000 (19:48 +0000)]
PR gdb/2280
* coffread.c (read_one_sym): Check for read errors.
Ulrich Weigand [Thu, 11 Oct 2007 19:35:29 +0000 (19:35 +0000)]
* linux-nat.c (lin_lwp_attach_lwp): Use "Linux kernel 2.6.19"
instead of "Linux 2.6.19" in comment.
(linux_xfer_partial): Use "GNU/Linux target" instead of
"Linux target" in comment.
* m68klinux-tdep.c (m68k_linux_inferior_created): Likewise.
(m68k_linux_get_sigtramp_info): Likewise.
Ian Lance Taylor [Thu, 11 Oct 2007 19:13:02 +0000 (19:13 +0000)]
From Andrew Chatham: exit on relocation error.
Daniel Jacobowitz [Thu, 11 Oct 2007 19:08:53 +0000 (19:08 +0000)]
* MAINTAINERS (language support): List Joel and Paul as
Ada maintainers.
Daniel Jacobowitz [Thu, 11 Oct 2007 19:01:43 +0000 (19:01 +0000)]
* dbxread.c (process_one_symbol): Remove VARIABLES_INSIDE_BLOCK
checks.
* config/arm/embed.mt, config/arm/linux.mt, config/arm/wince.mt: Do
not set DEPRECATED_TM_FILE.
* config/arm/tm-arm.h: Delete file.
* gdbint.texinfo (Target Conditionals): Remove VARIABLES_INSIDE_BLOCK.
Luis Machado [Thu, 11 Oct 2007 18:48:43 +0000 (18:48 +0000)]
* MAINTAINERS (Write After Approval): Add self.
Daniel Jacobowitz [Thu, 11 Oct 2007 18:44:07 +0000 (18:44 +0000)]
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.c (cb_is_stdin, cb_is_stdout, cb_is_stderr): Add functions.
* syscall.c (cb_syscall): Test for stdin/out/err, not just fd 0/1/2.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.h (cb_is_stdin, cb_is_stdout, cb_is_stderr): Add prototypes.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* sim/cris/c/freopen2.c: Added testcase.
Daniel Jacobowitz [Thu, 11 Oct 2007 18:40:29 +0000 (18:40 +0000)]
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.c (cb_is_stdin): Add.
* syscall.c (cb_syscall): Test for stdin, not just fd 0.
2007-10-11 Jesper Nilsson <jesper.nilsson@axis.com>
* callback.h (cb_is_stdin): Add prototype.
Daniel Jacobowitz [Thu, 11 Oct 2007 18:15:02 +0000 (18:15 +0000)]
* src-release (GDB_SUPPORT_DIRS): Add libdecnumber.
* libdecnumber: New directory, imported from GCC.
Daniel Jacobowitz [Thu, 11 Oct 2007 17:38:59 +0000 (17:38 +0000)]
* buildsym.c (record_line): Remove empty lines followed by
end-of-sequence markers.
Nick Clifton [Thu, 11 Oct 2007 15:18:40 +0000 (15:18 +0000)]
PR gas/5161
* config/tc-ia64.c: Allow for translations of error and warning messages.
* po/gas.pot: Regenerate.
Kazu Hirata [Thu, 11 Oct 2007 14:36:37 +0000 (14:36 +0000)]
* configure.tgt: Recognize fido-*-elf.
Nick Clifton [Thu, 11 Oct 2007 14:17:44 +0000 (14:17 +0000)]
PR gas/5158
* config/tc-h8300.c (tc_gen_reloc): Allow for translation of error message.
* po/gas.pot: Regenerate.
H.J. Lu [Thu, 11 Oct 2007 14:08:47 +0000 (14:08 +0000)]
2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
* doc/c-i386.texi: Update which instruction's operands are
swapped.
Nick Clifton [Thu, 11 Oct 2007 13:48:39 +0000 (13:48 +0000)]
PR gas/5155
* config/tc-msp430.c: Fix spelling typos.
Nick Clifton [Thu, 11 Oct 2007 10:37:30 +0000 (10:37 +0000)]
* doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
H.J. Lu [Thu, 11 Oct 2007 05:03:07 +0000 (05:03 +0000)]
2007-10-10 H.J. Lu <hongjiu.lu@intel.com>
* elf.c (get_program_header_size): Always add a PT_GNU_RELRO
segment for -z relro.
(_bfd_elf_map_sections_to_segments): Make a PT_GNU_RELRO
segment only when needed.
gdbadmin [Thu, 11 Oct 2007 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 11 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
H.J. Lu [Wed, 10 Oct 2007 22:00:24 +0000 (22:00 +0000)]
Remove extra white space.
Jim Blandy [Wed, 10 Oct 2007 19:44:30 +0000 (19:44 +0000)]
* dwarf.c (process_debug_info): Line up section offsets of
attribute values with those of dies.
(read_and_display_attr): Reduce spacing here.
Jim Blandy [Wed, 10 Oct 2007 19:43:43 +0000 (19:43 +0000)]
* dwarf.c (display_debug_lines): Print the offset of each line
number program header.
Ian Lance Taylor [Wed, 10 Oct 2007 19:30:39 +0000 (19:30 +0000)]
From Craig Silverstein: don't permit -s and -r.
gdbadmin [Wed, 10 Oct 2007 19:13:49 +0000 (19:13 +0000)]
Add entry for gdb-6.7 release.
Ian Lance Taylor [Wed, 10 Oct 2007 19:02:56 +0000 (19:02 +0000)]
Implement -s and -S options which strip symbols.
Ulrich Weigand [Wed, 10 Oct 2007 17:07:25 +0000 (17:07 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* stack.c (print_frame_args, frame_info, return_command): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
Ulrich Weigand [Wed, 10 Oct 2007 17:06:30 +0000 (17:06 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* rs6000-nat.c (fetch_register, store_register)
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers): Use
get_regcache_arch to get at the current architecture by regcache.
* rs6000-tdep.c (rs6000_push_dummy_call, rs6000_return_value)
(rs6000_register_reggroup_p, e500_move_ev_registe, rs6000_unwind_pc)
(rs6000_unwind_dummy_id, rs6000_frame_cache, rs6000_dump_tdep): Replace
current_gdbarch by gdbarch.
(rs6000_skip_trampoline_code, rs6000_register_to_value)
(rs6000_value_to_register): Use get_frame_arch to get at the current
architecture by frame_info.
Ulrich Weigand [Wed, 10 Oct 2007 17:05:31 +0000 (17:05 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* sparc-tdep.c (sparc_supply_rwindow, sparc_collect_rwindow): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc64-tdep.c (sparc64_supply_gregset, sparc64_collect_gregset)
(sparc64_supply_fpregset, sparc64_collect_fpregset): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc64nbsd-nat. (sparc64nbsd_supply_gregset)
(sparc64nbsd_collect_gregset, sparc64nbsd_supply_fpregset)
(sparc64nbsd_collect_fpregset): Use get_regcache_arch to get at the
current architecture by regcache.
Ulrich Weigand [Wed, 10 Oct 2007 17:04:38 +0000 (17:04 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* remote-mips.c (mips_wait, mips_fetch_registers)
(mips_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
* mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg)
(mipsnbsd_supply_fpreg, mipsnbsd_fill_fpreg): Use get_regcache_arch to
get at the current architecture by regcache.
(mipsnbsd_sigtramp_offset): Use get_frame_arch to get at the current
architecture by frame_info.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture by regcache.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips64_linux_get_longjmp_target, mips_linux_o32_sigframe_init)
(mips_linux_n32n64_sigframe_init): Use get_frame_arch to get at the
current architecture by frame_info.
(supply_32bit_reg, mips_supply_gregset, mips_fill_gregset)
(mips_supply_fpregset, mips_fill_fpregset, supply_64bit_reg)
(mips64_supply_gregset, mips64_fill_gregset, mips64_supply_fpregset)
(mips64_fill_fpregset, mips_linux_write_pc): Use get_regcache_arch to
get at the current architecture by regcache.
* mips-linux-nat.c (mips_linux_register_addr)
(mips64_linux_register_addr): Replace current_gdbarch by gdbarch.
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset)
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers): Use get_regcache_arch to get at
the current architecture by regcache.
* mips64obsd-tdep.c (mips64obsd_sigframe_init): Use get_frame_arch to
get at the current architecture by frame_info.
Ulrich Weigand [Wed, 10 Oct 2007 17:03:36 +0000 (17:03 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* mips-tdep.c (mips_xfer_register): Use get_regcache_arch to get at the
current architecture by regcache.
(mips2_fp_compat, mips32_next_pc, mips16_scan_prologue)
(mips_insn16_frame_cache, mips32_scan_prologue, mips_insn32_frame_cache)
(mips_stub_frame_cache, mips_read_fp_register_single)
(mips_read_fp_register_double, mips_print_fp_register)
(mips_print_register, print_gp_register_row): Use get_frame_arch to get
at the current architecture by frame_info.
(mips_register_reggroup_p, mips_pseudo_register_read, mips_unwind_sp)
(mips_pseudo_register_write, mips_register_type, mips_unwind_pc)
(mips_unwind_dummy_id, mips_eabi_push_dummy_call)
(mips_n32n64_push_dummy_call, mips_n32n64_return_value)
(mips_o32_push_dummy_call, mips_o32_return_value)
(mips_o64_push_dummy_call, mips_o64_return_value)
(mips_print_registers_info, mips_dump_tdep): Replace current_gdbarch by
gdbarch.
Ulrich Weigand [Wed, 10 Oct 2007 17:01:10 +0000 (17:01 +0000)]
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.c (xtensa_register_type, xtensa_pseudo_register_read)
(xtensa_pseudo_register_write, xtensa_register_reggroup_p)
(xtensa_unwind_pc, xtensa_unwind_dummy_id, xtensa_push_dummy_call)
(xtensa_dump_tdep): Replace current_gdbarch by gdbarch.
(xtensa_register_write_masked, xtensa_register_read_masked)
(xtensa_supply_gregset, xtensa_store_return_value)
(xtensa_extract_return_value): Use get_regcache_arch to get at the
current architecture by regcache.
(xtensa_frame_cache, call0_frame_get_reg_at_entry, call0_frame_cache)
(xtensa_frame_prev_register): Use get_frame_arch to get at the current
architecture by frame_info.
H.J. Lu [Wed, 10 Oct 2007 16:25:02 +0000 (16:25 +0000)]
2007-10-10 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (v_mode): Defined as previous one + 1.
(w_mode): Likewise.
(d_mode): Likewise.
(q_mode): Likewise.
(t_mode): Likewise.
(x_mode): Likewise.
(m_mode): Likewise.
(cond_jump_mode): Likewise.
(loop_jcxz_mode): Likewise.
(dq_mode): Likewise.
(dqw_mode): Likewise.
(f_mode): Likewise.
(const_1_mode): Likewise.
(stack_v_mode): Likewise.
(z_mode): Likewise.
(o_mode): Likewise.
(dqb_mode): Likewise.
(dqd_mode): Likewise.
(es_reg): Likewise.
(cs_reg): Likewise.
(ss_reg): Likewise.
(ds_reg): Likewise.
(fs_reg): Likewise.
(gs_reg): Likewise.
(eAX_reg): Likewise.
(eCX_reg): Likewise.
(eDX_reg): Likewise.
(eBX_reg): Likewise.
(eSP_reg): Likewise.
(eBP_reg): Likewise.
(eSI_reg): Likewise.
(eDI_reg): Likewise.
(al_reg): Likewise.
(cl_reg): Likewise.
(dl_reg): Likewise.
(bl_reg): Likewise.
(ah_reg): Likewise.
(ch_reg): Likewise.
(dh_reg): Likewise.
(bh_reg): Likewise.
(ax_reg): Likewise.
(cx_reg): Likewise.
(dx_reg): Likewise.
(bx_reg): Likewise.
(sp_reg): Likewise.
(bp_reg): Likewise.
(si_reg): Likewise.
(di_reg): Likewise.
(rAX_reg): Likewise.
(rCX_reg): Likewise.
(rDX_reg): Likewise.
(rBX_reg): Likewise.
(rSP_reg): Likewise.
(rBP_reg): Likewise.
(rSI_reg): Likewise.
(rDI_reg): Likewise.
(z_mode_ax_reg): Likewise.
(indir_dx_reg): Likewise.
(DREX_OC1): Updated.
(DREX_NO_OC0): Likewise.
(DREX_MASK): Likewise.
(MAX_BYTEMODE): New. Issue an error if MAX_BYTEMODE is not
less than DREX_OC1.
Daniel Jacobowitz [Wed, 10 Oct 2007 14:04:53 +0000 (14:04 +0000)]
* arm-tdep.c (struct arm_prologue_cache): Remove frameoffset.
(thumb_analyze_prologue): Move pv_area_store_would_trash call
out of loop. Do not set cache->frameoffset.
(arm_scan_prologue): Use prologue-value mechanism. Do not set
frameoffset. Simplify framesize.
(arm_make_prologue_cache, arm_normal_frame_base): Do not use
frameoffset.
* arm-tdep.h (enum gdb_regnum): Add ARM_IP_REGNUM.
Daniel Jacobowitz [Wed, 10 Oct 2007 13:28:43 +0000 (13:28 +0000)]
* target.c (update_current_target): Call setup_target_debug.
(push_target): Do not call it here.
Ian Lance Taylor [Wed, 10 Oct 2007 06:33:56 +0000 (06:33 +0000)]
From Craig Silverstein: don't get confused if the same file name
occurs in an archive.
Ian Lance Taylor [Wed, 10 Oct 2007 06:29:10 +0000 (06:29 +0000)]
From Craig Silverstein: delete the output file first if it exists and
is non-empty.
Alan Modra [Wed, 10 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 10 Oct 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Michael Snyder [Tue, 9 Oct 2007 23:28:13 +0000 (23:28 +0000)]
2007-10-09 Michael Snyder <msnyder@specifix.com>
* MAINTAINERS: Update my email address.
Ian Lance Taylor [Tue, 9 Oct 2007 21:37:55 +0000 (21:37 +0000)]
Create a note section with the version of gold.
Ulrich Weigand [Tue, 9 Oct 2007 19:54:04 +0000 (19:54 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.c: Replace following current-gdbarch based macros by
their expression:
(xtensa_pseudo_register_read)
(xtensa_pseudo_register_write): XTENSA_TARGET_FLAGS.
(ARG_NOF, ARG_1ST, xtensa_extract_return_value)
(xtensa_store_return_value, xtensa_push_dummy_call): CALL_ABI.
(xtensa_pseudo_register_read)
(xtensa_pseudo_register_write): ISA_USE_WINDOWED_REGISTERS.
(xtensa_breakpoint_from_pc): ISA_USE_DENSITY_INSTRUCTIONS.
(xtensa_register_type, xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register): NUM_AREGS.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write,
(xtensa_supply_gregset, xtensa_frame_cache, xtensa_frame_prev_register,
(xtensa_extract_return_value, xtensa_store_return_value): WB_REGNUM.
(xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register): WS_REGNUM.
(xtensa_supply_gregset): LBEG_REGNUM, LEND_REGNUM, LCOUNT_REGNUM,
SAR_REGNUM, EXCCAUSE_REGNUM, EXCVADDR_REGNUM
(xtensa_register_name, xtensa_register_type, xtensa_reg_to_regnum)
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_register_reggroup_p): REGMAP.
(call0_track_op): LITBASE_REGNUM.
(xtensa_register_type, xtensa_reg_to_regnum, call0_frame_cache):A0_BASE
(xtensa_supply_gregset, call0_frame_get_reg_at_entry)
(xtensa_frame_prev_register, AREG_NUMBER)
(xtensa_register_type): AR_BASE.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write): FP_ALIAS.
(AREG_NUMBER): AREGS_MASK, WB_MASK, A0_REGNUM.
(ARG_1ST, xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_cache, xtensa_frame_prev_register)
(xtensa_extract_return_value, xtensa_store_return_value)
(xtensa_push_dummy_call, call0_frame_cache): A0_REGNUM.
(xtensa_register_type, xtensa_pseudo_register_read, xtensa_frame_cache)
(xtensa_pseudo_register_write, xtensa_unwind_dummy_id)
(xtensa_frame_prev_register, xtensa_push_dummy_call)
(call0_frame_cache): A1_REGNUM.
(xtensa_extract_return_value, xtensa_store_return_value): A2_REGNUM.
(xtensa_push_dummy_call): A4_REGNUM.
(ARGS_FIRST_REG): A6_REGNUM.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_prev_register): A15_REGNUM.
* xtensa-tdep.h: Delete current_gdbarch based macros after replacing
them in the appropriate source file:
XTENSA_TARGET_FLAGS, SPILL_LOCATION, SPILL_SIZE, CALL_ABI, NUM_AREGS,
ISA_USE_WINDOWED_REGISTERS, ISA_USE_DENSITY_INSTRUCTIONS, WB_REGNUM,
ISA_USE_EXCEPTIONS, ISA_USE_EXT_L32R, DEBUG_DATA_VADDR_TRAP_COUNT,
DEBUG_INST_VADDR_TRAP_COUNT, ISA_MAX_INSN_SIZE, DEBUG_NUM_IBREAKS,
DEBUG_NUM_DBREAKS, WS_REGNUM, LBEG_REGNUM, LEND_REGNUM, SAR_REGNUM,
REGMAP, LITBASE_REGNUM, DEBUGCAUSE_REGNUM, EXCCAUSE_REGNUM, AR_BASE,
EXCVADDR_REGNUM, NUM_IBREAKS, REGMAP_BYTES, NUM_CONTEXTS, FP_ALIAS,
FP_LAYOUT, FP_LAYOUT_BYTES, GREGMAP, AREGS_MASK, WB_MASK, A0_REGNUM,
A1_REGNUM, A2_REGNUM, A3_REGNUM, A4_REGNUM, A5_REGNUM, A6_REGNUM,
A7_REGNUM, A8_REGNUM, A9_REGNUM, A10_REGNUM, A11_REGNUM, A12_REGNUM,
A13_REGNUM, A14_REGNUM, A15_REGNUM.
Ulrich Weigand [Tue, 9 Oct 2007 18:19:47 +0000 (18:19 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* h8300-tdep.c (h8300_frame_cache): Use get_frame_arch to get at
the current architecture by frame_info.
(h8300_frame_prev_register
(h8300_print_register): Replace current_gdbarch by gdbarch.
(h8300_print_registers_info, h8300_register_type)
(h8300_register_type): Likewise.
Ulrich Weigand [Tue, 9 Oct 2007 18:18:50 +0000 (18:18 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* i386-linux-nat.c (fetch_register): Use get_regcache_arch to get at
the current architecture by regcache.
(store_register, supply_gregset, fill_gregset, i386_linux_resume)
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers): Likewise.
* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Likewise.
* i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.
* i386-tdep.c (i386_unwind_pc): Replace current_gdbarch by gdbarch.
(i386_extract_return_value, i386_store_return_value): Likewise.
* i386-tdep.c (i386_frame_prev_register): Use get_frame_arch to get at
the current architecture by frame_info.
(i386_sigtramp_frame_cache, i386_get_longjmp_target)
(i386_register_to_value, i386_value_to_register): Likewise.
Ulrich Weigand [Tue, 9 Oct 2007 18:17:31 +0000 (18:17 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* monitor.c (monitor_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
(monitor_store_register, monitor_store_registers): Likewise.
Ulrich Weigand [Tue, 9 Oct 2007 18:16:00 +0000 (18:16 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* dbug-rom.c (dbug_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
Ulrich Weigand [Tue, 9 Oct 2007 18:15:04 +0000 (18:15 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* arch-utils.c (legacy_return_value): Replace current_gdbarch by
gdbarch.
Ulrich Weigand [Tue, 9 Oct 2007 18:14:09 +0000 (18:14 +0000)]
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* frame.c (frame_pc_unwind): Use get_frame_arch to get at the current
architecture by frame.
(frame_save_as_regcache, frame_register_unwind, get_prev_frame_1)
(inside_main_func, frame_sp_unwind): Likewise.
Daniel Jacobowitz [Tue, 9 Oct 2007 17:59:01 +0000 (17:59 +0000)]
* solib-svr4.c (enable_break): Add the dynamic linker also if
auxv succeeds.
* gdb.server/server-run.exp: Test for dynamic linker symbols.
Ian Lance Taylor [Tue, 9 Oct 2007 17:46:15 +0000 (17:46 +0000)]
Fix soname for library found in search path.
Carlos Eduardo Seo [Tue, 9 Oct 2007 16:03:07 +0000 (16:03 +0000)]
* MAINTAINERS (Write After Approval): Add self.
Pierre Muller [Tue, 9 Oct 2007 15:08:02 +0000 (15:08 +0000)]
2007/10/09 Pierre Muller <muller@ics.u-strasbg.fr>
* lib/gdb.exp (gdb_run_cmd): Move comment outside
of gdb_expect call, to avoid interruption.
H.J. Lu [Tue, 9 Oct 2007 13:32:50 +0000 (13:32 +0000)]
binutils/
2007-10-09 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4476
* readelf.c (print_dynamic_symbol): New.
(process_symbol_table): Handle DT_GNU_HASH for dynamic symbols.
ld/testsuite/
2007-10-09 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4476
* ld-elf/hash.d: Check "-s -D" for readelf.
Pedro Alves [Tue, 9 Oct 2007 09:05:53 +0000 (09:05 +0000)]
* stabsread.c (read_huge_number): Initialize local variable to 0.
Pierre Muller [Tue, 9 Oct 2007 06:59:27 +0000 (06:59 +0000)]
2007-10-09 Pierre Muller <muller@ics.u-strasbg.fr>
* p-lang.h (pascal_main_name): Add declaration.
* p-lang.c (GPC_P_INITIALIZE, GPC_MAIN_PROGRAM_NAME_1)
(GPC_MAIN_PROGRAM_NAME_2): New constants.
(pascal_main_name): New function.
* symtab.c: Include p-lang.h.
(find_main_name): Add call to pascal_main_name.
* Makefile.in (symtab.o): Add dependency on p-lang.h.
Carlos O'Donell [Tue, 9 Oct 2007 02:17:23 +0000 (02:17 +0000)]
*** empty log message ***
Alan Modra [Tue, 9 Oct 2007 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 9 Oct 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Pedro Alves [Mon, 8 Oct 2007 23:15:55 +0000 (23:15 +0000)]
2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
* gdb.base/whatis.c (v_long_long, v_signed_long_long)
(v_unsigned_long_long, v_long_long_array)
(v_signed_long_long_array, v_unsigned_long_long_array)
(slong_long_addr, a_slong_long_addr, v_long_long_pointer)
(v_signed_long_long_pointer, v_unsigned_long_long_pointer)
[!NO_LONG_LONG]: New.
(t_struct, v_struct2, t_union, v_union2) [!NO_LONG_LONG]: Add
v_long_long_member.
(v_long_long_func, v_signed_long_long_func)
(v_unsigned_long_long_func) [!NO_LONG_LONG]: New.
(main) [!NO_LONG_LONG]: Initialize long long variants.
* gdb.base/whatis.exp: If board file requests no_long_long, build
test with NO_LONG_LONG defined. Test long long, signed long long,
and unsigned long long variants but only if board file doesn't
disable it.
Pedro Alves [Mon, 8 Oct 2007 23:06:20 +0000 (23:06 +0000)]
2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
* stabsread.c (read_huge_number): Fix handling of octal
representation when the bit width is known.
(read_range_type): Record unsigned integral types with their size,
when the type size is known.
Thiago Jung Bauermann [Mon, 8 Oct 2007 19:37:07 +0000 (19:37 +0000)]
2007-10-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
* MAINTAINERS (Write After Approval): Add self.
Thiago Jung Bauermann [Mon, 8 Oct 2007 19:31:48 +0000 (19:31 +0000)]
* MAINTAINERS (Write After Approval): Add self.
H.J. Lu [Mon, 8 Oct 2007 19:22:01 +0000 (19:22 +0000)]
gas/testsuite/
2007-10-08 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run simd-suffix and x86-64-simd-suffix.
* gas/i386/simd-suffix.d: New.
* gas/i386/x86-64-simd-suffix.d: Likewise.
* gas/i386/x86-64-opcode.d: Updated.
* gas/i386/x86-64-simd.d: Likewise.
opcodes/
2007-10-08 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c: Updated comments for 'Y'.
(putop): Don't add 'q' for 'Y' if suffix_always isn't true.
Maciej W. Rozycki [Mon, 8 Oct 2007 16:41:35 +0000 (16:41 +0000)]
opcodes/:
* opcodes/mips-dis.c (mips_cp0_names_r3000): New definition.
(mips_cp0_names_r4000): Likewise.
(mips_arch_choices): Link to the above as appropriate.
gas/testsuite/:
* gas/mips/cp0-names-r3000.d: New test for R3000 CP0 symbolic
disassembly.
* gas/mips/cp0-names-r4000.d: New test for R4000/R4400 symbolic
CP0 disassembly.
* mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Mon, 8 Oct 2007 16:09:35 +0000 (16:09 +0000)]
gas/:
* config/tc-mips.c (AT): Rename to...
(ATREG): ... this.
(AT): New definition.
(mips_set_options): Rename "noat" to "at"; change the type.
(mips_opts): Update accordingly.
(append_insn): Likewise.
(macro_build_ldst_constoffset): Likewise.
(load_address): Likewise.
(macro, macro2): Likewise.
(s_mipsset): Handle ".set at=REG". Update handling of ".set at"
and ".set noat".
gas/testsuite/:
* gas/mips/at-1.d, gas/mips/at-2.l: New tests to check the ".set
at=REG" directive.
* gas/mips/at-1.s, gas/mips/at-2.s: Sources for the new tests.
* gas/mips/mips.exp: Run the new tests.
Nick Clifton [Mon, 8 Oct 2007 15:40:41 +0000 (15:40 +0000)]
* configure.in (SHARED_DEPENDENCIES): Change non-cygwin dependency to be ../bfd/libbfd.la.
* configure: Regenerate.
Nick Clifton [Mon, 8 Oct 2007 15:35:33 +0000 (15:35 +0000)]
PR 5142: Allow for translation of error messages
Nick Clifton [Mon, 8 Oct 2007 15:29:40 +0000 (15:29 +0000)]
* doc/as.texinfo (Previous): Clarify explanation of the behaviour of this
pseudo-op and add a couple of examples.
Nick Clifton [Mon, 8 Oct 2007 15:26:42 +0000 (15:26 +0000)]
PR gas/5121 gas/5122 gas/5123 gas/5124 gas/5125 gas/5126 gas/5129 gas/5131 gas/5132 gas/5137 gas/5143
* Makefile.am (CFILES): Add cgen.c
(TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c, tc-tic4x.c and xtensa-relax.c.
(TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h, tc-tic4x.h and xtensa-relax.h.
(TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h, te-ic960.h, te-linux.h.
Add te-aix5.h, te-armeabi.h, te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
(CONFIG_ATOF_CFILES): New variable.
(POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with dependency upon TARG_ENV_HFILES.
(DEPTC): Do not put "#include opcodes/<foo>-desc.h" into cgen-desc.h when foo-desc.h does not exit.
Run make dep-am.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
* po/es.po: Regenerate.
* po/fr.po: Regenerate.
* po/gas.pot: Regenerate.
* po/rw.po: Regenerate.
* po/tr.po: Regenerate.
* config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation of error messages.
* config/obj-som.c: Likewise.
* config/tc-arc.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-bfin.c: Likewise.
* config/tc-frv.c: Likewise.
Pierre Muller [Mon, 8 Oct 2007 15:23:42 +0000 (15:23 +0000)]
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* breakpoint.c (print_one_breakpoint_location): ARI fix:
Replace asprintf by xstrprintf.
Pierre Muller [Mon, 8 Oct 2007 15:09:04 +0000 (15:09 +0000)]
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* linux-fork.c: ARI fix: include "gdb_dirent.h" instead of <dirent.h>.
Makefile.in (linux-fork.o): Add gdb_dirent.h dependency.
Pierre Muller [Mon, 8 Oct 2007 14:40:42 +0000 (14:40 +0000)]
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* linux-fork.c: Move "gdb_wait.h" include back to the position of
<sys/wait.h> include before last commit.
Carlos O'Donell [Mon, 8 Oct 2007 13:50:18 +0000 (13:50 +0000)]
2007-10-08 Carlos O'Donell <carlos@codesourcery.com>
* resrc.c (read_rc_file): Rename e to edit, and c to dir.
Pass dir to windres_add_include_dir. Add comments.
(close_input_stream): Check pclose error, and call fatal if
the preprocessor failed.
* windres.c (windres_add_include_dir): Assert that p is non-NULL,
and not an empty string.
Maciej W. Rozycki [Mon, 8 Oct 2007 13:15:00 +0000 (13:15 +0000)]
* mips-tdep.c (mips32_next_pc): Fix a typo in BGTZL.
Ulrich Weigand [Mon, 8 Oct 2007 12:58:04 +0000 (12:58 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* aix-thread.c (supply_gprs64, supply_fprs, supply_sprs64)
(supply_sprs32, fetch_regs_user_thread, fetch_regs_kernel_thread)
(fill_gprs64, fill_gprs32, fill_fprs, fill_sprs64, fill_sprs32)
(store_regs_user_thread, store_regs_kernel_thread): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
Ulrich Weigand [Mon, 8 Oct 2007 12:57:04 +0000 (12:57 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* sh64-tdep.c (sh64_push_dummy_call, sh64_register_type)
(sh64_pseudo_register_read, sh64_pseudo_register_write)
(sh64_do_fp_register, sh64_do_pseudo_register, sh64_do_register)
(sh64_print_register, sh64_media_print_registers_info)
(sh64_compact_print_registers_info, sh64_unwind_sp)
(sh64_unwind_pc): Replace current_gdbarch by gdbarch.
(sh64_show_media_regs, sh64_show_compact_regs, sh64_frame_cache)
(sh64_frame_prev_register): Use FRAME to recognize current
architecture.
Ulrich Weigand [Mon, 8 Oct 2007 12:56:03 +0000 (12:56 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
(sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
(sh_register_reggroup_p, sh_dwarf2_frame_init_reg): Replace
current_gdbarch by gdbarch.
(sh_generic_show_regs, sh3_show_reg, sh2e_show_regs, sh2a_show_regs)
(sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs)
(sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs, sh_frame_cache)
(sh_frame_prev_register, sh_unwind_sp, sh_unwind_pc): Use FRAME to
recognize current architecture.
Ulrich Weigand [Mon, 8 Oct 2007 12:55:09 +0000 (12:55 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* remote.c (init_remote_state, fetch_register_using_p)
(process_g_packet, remote_fetch_registers, remote_prepare_to_store)
(store_register_using_P, store_registers_using_G)
(remote_store_registers): Use get_regcache_arch or get_frame_arch to
get at the current architecture by regcache or by frame, respectively.
Ulrich Weigand [Mon, 8 Oct 2007 12:54:07 +0000 (12:54 +0000)]
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* m68k-tdep.c (m68k_register_to_value, m68k_value_to_register)
(m68k_svr4_extract_return_value, m68k_svr4_store_return_value)
(m68k_frame_prev_register, m68k_get_longjmp_target): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m68klinux-nat.c (fetch_register, old_fetch_inferior_registers)
(store_register, old_store_inferior_registers, supply_gregset)
(supply_fpregset, fill_fpregset): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_unwind_pc, m68k_dump_tdep):
Replace current_gdbarch by gdbarch.
projects / external / binutils.git / log