Pengcheng Yang [Sun, 24 Jan 2021 05:07:14 +0000 (13:07 +0800)]
tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN
Upon receiving a cumulative ACK that changes the congestion state from
Disorder to Open, the TLP timer is not set. If the sender is app-limited,
it can only wait for the RTO timer to expire and retransmit.
The reason for this is that the TLP timer is set before the congestion
state changes in tcp_ack(), so we delay the time point of calling
tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and
remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer
is set.
This commit has two additional benefits:
1) Make sure to reset RTO according to RFC6298 when receiving ACK, to
avoid spurious RTO caused by RTO timer early expires.
2) Reduce the xmit timer reschedule once per ACK when the RACK reorder
timer is set.
Fixes:
df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enke Chen [Fri, 22 Jan 2021 19:13:06 +0000 (11:13 -0800)]
tcp: make TCP_USER_TIMEOUT accurate for zero window probes
The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the
timer has backoff with a max interval of about two minutes, the
actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes.
In this patch the TCP_USER_TIMEOUT is made more accurate by taking it
into account when computing the timer value for the 0-window probes.
This patch is similar to and builds on top of the one that made
TCP_USER_TIMEOUT accurate for RTOs in commit
b701a99e431d ("tcp: Add
tcp_clamp_rto_to_user_timeout() helper to improve accuracy").
Fixes:
9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210122191306.GA99540@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 15:27:48 +0000 (07:27 -0800)]
NFC: fix resource leak when target index is invalid
Goto to the label put_dev instead of the label error to fix potential
resource leak on path that the target index is invalid.
Fixes:
c4fbb6515a4d ("NFC: The core part should generate the target index")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121152748.98409-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 15:37:45 +0000 (07:37 -0800)]
NFC: fix possible resource leak
Put the device to avoid resource leak on path that the polling flag is
invalid.
Fixes:
a831b9132065 ("NFC: Do not return EBUSY when stopping a poll that's already stopped")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121153745.122184-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pali Rohár [Thu, 21 Jan 2021 15:02:44 +0000 (16:02 +0100)]
doc: networking: ip-sysctl: Document conf/all/disable_ipv6 and conf/default/disable_ipv6
This patch adds documentation for sysctl conf/all/disable_ipv6 and
conf/default/disable_ipv6 settings which is currently missing.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210121150244.20483-1-pali@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 14:57:38 +0000 (06:57 -0800)]
chtls: Fix potential resource leak
The dst entry should be released if no neighbour is found. Goto label
free_dst to fix the issue. Besides, the check of ndev against NULL is
redundant.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121145738.51091-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Thu, 21 Jan 2021 12:33:43 +0000 (04:33 -0800)]
net: dsa: bcm_sf2: put device node before return
Put the device node dn before return error code on failure path.
Fixes:
461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 23 Jan 2021 20:34:24 +0000 (12:34 -0800)]
Merge branch 'fix-and-move-definitions-of-mrp-data-structures'
Rasmus Villemoes says:
====================
fix and move definitions of MRP data structures
We unnecessarily included packet structures of MRP in a uAPI header.
Turns out that some of them were in fact broken due to lack of packing,
so let's take this chance to remove them completely. Leave it to user
space to create its own, correct definitions. Said structures are not
used in the user space <> kernel communication.
====================
Link: https://lore.kernel.org/r/20210121204037.61390-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Thu, 21 Jan 2021 20:40:37 +0000 (21:40 +0100)]
net: mrp: move struct definitions out of uapi
None of these are actually used in the kernel/userspace interface -
there's a userspace component of implementing MRP, and userspace will
need to construct certain frames to put on the wire, but there's no
reason the kernel should provide the relevant definitions in a UAPI
header.
In fact, some of those definitions were broken until previous commit,
so only keep the few that are actually referenced in the kernel code,
and move them to the br_private_mrp.h header.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Thu, 21 Jan 2021 20:40:36 +0000 (21:40 +0100)]
net: mrp: fix definitions of MRP test packets
Wireshark says that the MRP test packets cannot be decoded - and the
reason for that is that there's a two-byte hole filled with garbage
between the "transitions" and "timestamp" members.
So Wireshark decodes the two garbage bytes and the top two bytes of
the timestamp written by the kernel as the timestamp value (which thus
fluctuates wildly), and interprets the lower two bytes of the
timestamp as a new (type, length) pair, which is of course broken.
Even though this makes the timestamp field in the struct unaligned, it
actually makes it end up on a 32 bit boundary in the frame as mandated
by the standard, since it is preceded by a two byte TLV header.
The struct definitions live under include/uapi/, but they are not
really part of any kernel<->userspace API/ABI, so fixing the
definitions by adding the packed attribute should not cause any
compatibility issues.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Wed, 20 Jan 2021 12:20:37 +0000 (04:20 -0800)]
net: fec: put child node on error path
Also decrement the reference count of child device on error path.
Fixes:
3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Wed, 20 Jan 2021 11:07:44 +0000 (03:07 -0800)]
net: stmmac: dwmac-intel-plat: remove config data on error
Remove the config data when rate setting fails.
Fixes:
9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kevin Hao [Thu, 21 Jan 2021 07:09:06 +0000 (15:09 +0800)]
net: octeontx2: Make sure the buffer is 128 byte aligned
The octeontx2 hardware needs the buffer to be 128 byte aligned.
But in the current implementation of napi_alloc_frag(), it can't
guarantee the return address is 128 byte aligned even the request size
is a multiple of 128 bytes, so we have to request an extra 128 bytes and
use the PTR_ALIGN() to make sure that the buffer is aligned correctly.
Fixes:
7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers")
Reported-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Giacinto Cifelli [Wed, 20 Jan 2021 04:56:50 +0000 (05:56 +0100)]
net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family
Bus 003 Device 009: ID 1e2d:006f
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1e2d
idProduct 0x006f
bcdDevice 0.00
iManufacturer 3 Cinterion Wireless Modules
iProduct 2 PLSx3
iSerial 4
fa3c1419
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 303
bNumInterfaces 9
bConfigurationValue 1
iConfiguration 1 Cinterion Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 3
CDC Union:
bMasterInterface 2
bSlaveInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 4
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 5
CDC Union:
bMasterInterface 4
bSlaveInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 6
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 7
CDC Union:
bMasterInterface 6
bSlaveInterface 7
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 7
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 8
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Cc: stable@vger.kernel.org
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 21 Jan 2021 19:05:08 +0000 (11:05 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-01-21
1) Fix a rare panic on SMP systems when packet reordering
happens between anti replay check and update.
From Shmulik Ladkani.
2) Fix disable_xfrm sysctl when used on xfrm interfaces.
From Eyal Birger.
3) Fix a race in PF_KEY when the availability of crypto
algorithms is set. From Cong Wang.
4) Fix a return value override in the xfrm policy selftests.
From Po-Hsu Lin.
5) Fix an integer wraparound in xfrm_policy_addr_delta.
From Visa Hankala.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix wraparound in xfrm_policy_addr_delta()
selftests: xfrm: fix test return value override issue in xfrm_policy.sh
af_key: relax availability checks for skb size calculation
xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
xfrm: Fix oops in xfrm_replay_advance_bmp
====================
Link: https://lore.kernel.org/r/20210121121558.621339-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Vasut [Wed, 20 Jan 2021 03:05:02 +0000 (04:05 +0100)]
net: dsa: microchip: Adjust reset release timing to match reference reset circuit
KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended
circuit for interfacing with CPU/FPGA reset consisting of 10k pullup
resistor and 10uF capacitor to ground. This circuit takes ~100 ms to
rise enough to release the reset.
For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is
VDDIO - VIH
t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s
VDDIO
so we need ~95 ms for the reset to really de-assert, and then the
original 100us for the switch itself to come out of reset. Simply
msleep() for 100 ms which fits the constraint with a bit of extra
space.
Fixes:
5b797980908a ("net: dsa: microchip: Implement recommended reset timing")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Vasut [Wed, 20 Jan 2021 00:10:45 +0000 (01:10 +0100)]
net: dsa: microchip: ksz8795: Fix KSZ8794 port map again
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so
does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different
ID and port 3 not routed out, however the port 3 registers are present in
the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU
port {4}. Currently the driver always uses the last port as CPU port, on
KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port
3 and that is not OK, as it must also be port 4.
This patch adjusts the driver such that it always registers a switch with
5 ports total (4 external ports, 1 CPU port), always sets the CPU port to
switch port 4, and then configures the external port mask according to
the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765.
Fixes:
68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment")
Fixes:
4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible")
Fixes:
241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 20 Jan 2021 19:52:21 +0000 (11:52 -0800)]
Merge tag 'net-5.11-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and
can trees.
Current release - regressions:
- nfc: nci: fix the wrong NCI_CORE_INIT parameters
Current release - new code bugs:
- bpf: allow empty module BTFs
Previous releases - regressions:
- bpf: fix signed_{sub,add32}_overflows type handling
- tcp: do not mess with cloned skbs in tcp_add_backlog()
- bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
- bpf: don't leak memory in bpf getsockopt when optlen == 0
- tcp: fix potential use-after-free due to double kfree()
- mac80211: fix encryption issues with WEP
- devlink: use right genl user_ptr when handling port param get/set
- ipv6: set multicast flag on the multicast route
- tcp: fix TCP_USER_TIMEOUT with zero window
Previous releases - always broken:
- bpf: local storage helpers should check nullness of owner ptr passed
- mac80211: fix incorrect strlen of .write in debugfs
- cls_flower: call nla_ok() before nla_next()
- skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too"
* tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: systemport: free dev before on error path
net: usb: cdc_ncm: don't spew notifications
net: mscc: ocelot: Fix multicast to the CPU port
tcp: Fix potential use-after-free due to double kfree()
bpf: Fix signed_{sub,add32}_overflows type handling
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
tcp: fix TCP socket rehash stats mis-accounting
net: dsa: b53: fix an off by one in checking "vlan->vid"
tcp: do not mess with cloned skbs in tcp_add_backlog()
selftests: net: fib_tests: remove duplicate log test
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
sh_eth: Fix power down vs. is_opened flag ordering
net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
netfilter: rpfilter: mask ecn bits before fib lookup
udp: mask TOS bits in udp_v4_early_demux()
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
...
Linus Torvalds [Wed, 20 Jan 2021 19:46:38 +0000 (11:46 -0800)]
Merge tag 'for-linus-5.11-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for build failure showing up in some configurations"
* tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix 'nopvspin' build error
Tianjia Zhang [Tue, 19 Jan 2021 00:13:19 +0000 (00:13 +0000)]
X.509: Fix crash caused by NULL pointer
On the following call path, `sig->pkey_algo` is not assigned
in asymmetric_key_verify_signature(), which causes runtime
crash in public_key_verify_signature().
keyctl_pkey_verify
asymmetric_key_verify_signature
verify_signature
public_key_verify_signature
This patch simply check this situation and fixes the crash
caused by NULL pointer.
Fixes:
215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: João Fonseca <jpedrofonseca@ua.pt>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Wed, 20 Jan 2021 16:11:12 +0000 (16:11 +0000)]
cachefiles: Drop superfluous readpages aops NULL check
After the recent actions to convert readpages aops to readahead, the
NULL checks of readpages aops in cachefiles_read_or_alloc_page() may
hit falsely. More badly, it's an ASSERT() call, and this panics.
Drop the superfluous NULL checks for fixing this regression.
[DH: Note that cachefiles never actually used readpages, so this check was
never actually necessary]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245
Fixes:
9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Wed, 20 Jan 2021 17:16:01 +0000 (09:16 -0800)]
Merge tag 'linux-can-fixes-for-5.11-
20210120' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
linux-can-fixes-for-5.11-
20210120
All three patches are by Vincent Mailhol and fix a potential use after free bug
in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In
the TX-path the skb is used to read from after it was passed to the networking
stack with netif_rx_ni().
* tag 'linux-can-fixes-for-5.11-
20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
====================
Link: https://lore.kernel.org/r/20210120125202.2187358-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Wed, 20 Jan 2021 04:44:23 +0000 (20:44 -0800)]
net: systemport: free dev before on error path
On the error path, it should goto the error handling label to free
allocated memory rather than directly return.
Fixes:
31bc72d97656 ("net: systemport: fetch and use clock resources")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grant Grundler [Wed, 20 Jan 2021 01:12:08 +0000 (17:12 -0800)]
net: usb: cdc_ncm: don't spew notifications
RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.
This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
https://lkml.org/lkml/2020/8/27/1083
...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber:
000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...
This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.
This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.
When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...
Chrome OS cannot support RTL8156 until this is fixed.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alban Bedel [Tue, 19 Jan 2021 14:06:38 +0000 (15:06 +0100)]
net: mscc: ocelot: Fix multicast to the CPU port
Multicast entries in the MAC table use the high bits of the MAC
address to encode the ports that should get the packets. But this port
mask does not work for the CPU port, to receive these packets on the
CPU port the MAC_CPU_COPY flag must be set.
Because of this IPv6 was effectively not working because neighbor
solicitations were never received. This was not apparent before commit
9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb
entries) as the IPv6 entries were broken so all incoming IPv6
multicast was then treated as unknown and flooded on all ports.
To fix this problem rework the ocelot_mact_learn() to set the
MAC_CPU_COPY flag when a multicast entry that target the CPU port is
added. For this we have to read back the ports endcoded in the pseudo
MAC address by the caller. It is not a very nice design but that avoid
changing the callers and should make backporting easier.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Fixes:
9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries")
Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 18 Jan 2021 05:59:20 +0000 (14:59 +0900)]
tcp: Fix potential use-after-free due to double kfree()
Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct
request_sock and then can allocate inet_rsk(req)->ireq_opt. After that,
tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to
inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full
socket into ehash and sets NULL to ireq_opt. Otherwise,
tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full
socket.
The commit
01770a1661657 ("tcp: fix race condition when creating child
sockets from syncookies") added a new path, in which more than one cores
create full sockets for the same SYN cookie. Currently, the core which
loses the race frees the full socket without resetting inet_opt, resulting
in that both sock_put() and reqsk_put() call kfree() for the same memory:
sock_put
sk_free
__sk_free
sk_destruct
__sk_destruct
sk->sk_destruct/inet_sock_destruct
kfree(rcu_dereference_protected(inet->inet_opt, 1));
reqsk_put
reqsk_free
__reqsk_free
req->rsk_ops->destructor/tcp_v4_reqsk_destructor
kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1));
Calling kmalloc() between the double kfree() can lead to use-after-free, so
this patch fixes it by setting NULL to inet_opt before sock_put().
As a side note, this kind of issue does not happen for IPv6. This is
because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which
correspond to ireq_opt in IPv4.
Fixes:
01770a166165 ("tcp: fix race condition when creating child sockets from syncookies")
CC: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 20 Jan 2021 16:47:34 +0000 (08:47 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-20
1) Fix wrong bpf_map_peek_elem_proto helper callback, from Mircea Cirjaliu.
2) Fix signed_{sub,add32}_overflows type truncation, from Daniel Borkmann.
3) Fix AF_XDP to also clear pools for inactive queues, from Maxim Mikityanskiy.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix signed_{sub,add32}_overflows type handling
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
====================
Link: https://lore.kernel.org/r/20210120163439.8160-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Tue, 19 Jan 2021 23:24:24 +0000 (00:24 +0100)]
bpf: Fix signed_{sub,add32}_overflows type handling
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy
comment). It looks like this might have slipped in via copy/paste issue, also
given prior to
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
the signature of signed_sub_overflows() had s64 a and s64 b as its input args
whereas now they are truncated to s32. Thus restore proper types. Also, the case
of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both
have s32 as inputs, therefore align the former.
Fixes:
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:37 +0000 (20:41 +0900)]
can: peak_usb: fix use after free bugs
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the peak_usb_netif_rx_ni().
Reordering the lines solves the issue.
Fixes:
0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:36 +0000 (20:41 +0900)]
can: vxcan: vxcan_xmit: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the canfd_frame cfd which aliases skb memory is accessed
after the netif_rx_ni().
Fixes:
a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:35 +0000 (20:41 +0900)]
can: dev: can_restart: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the netif_rx_ni() in:
stats->rx_bytes += cf->len;
Reordering the lines solves the issue.
Fixes:
39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yuchung Cheng [Tue, 19 Jan 2021 19:26:19 +0000 (11:26 -0800)]
tcp: fix TCP socket rehash stats mis-accounting
The previous commit
32efcc06d2a1 ("tcp: export count for rehash attempts")
would mis-account rehashing SNMP and socket stats:
a. During handshake of an active open, only counts the first
SYN timeout
b. After handshake of passive and active open, stop updating
after (roughly) TCP_RETRIES1 recurring RTOs
c. After the socket aborts, over count timeout_rehash by 1
This patch fixes this by checking the rehash result from sk_rethink_txhash.
Fixes:
32efcc06d2a1 ("tcp: export count for rehash attempts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Tue, 19 Jan 2021 14:48:03 +0000 (17:48 +0300)]
net: dsa: b53: fix an off by one in checking "vlan->vid"
The > comparison should be >= to prevent accessing one element beyond
the end of the dev->vlans[] array in the caller function, b53_vlan_add().
The "dev->vlans" array is allocated in the b53_switch_init() function
and it has "dev->num_vlans" elements.
Fixes:
a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 19 Jan 2021 16:49:00 +0000 (08:49 -0800)]
tcp: do not mess with cloned skbs in tcp_add_backlog()
Heiner Kallweit reported that some skbs were sent with
the following invalid GSO properties :
- gso_size > 0
- gso_type == 0
This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2.
Juerg Haefliger was able to reproduce a similar issue using
a lan78xx NIC and a workload mixing TCP incoming traffic
and forwarded packets.
The problem is that tcp_add_backlog() is writing
over gso_segs and gso_size even if the incoming packet will not
be coalesced to the backlog tail packet.
While skb_try_coalesce() would bail out if tail packet is cloned,
this overwriting would lead to corruptions of other packets
cooked by lan78xx, sharing a common super-packet.
The strategy used by lan78xx is to use a big skb, and split
it into all received packets using skb_clone() to avoid copies.
The drawback of this strategy is that all the small skb share a common
struct skb_shared_info.
This patch rewrites TCP gso_size/gso_segs handling to only
happen on the tail skb, since skb_try_coalesce() made sure
it was not cloned.
Fixes:
4f693b55c3d2 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: Juerg Haefliger <juergh@canonical.com>
Tested-by: Juerg Haefliger <juergh@canonical.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423
Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Tue, 19 Jan 2021 02:59:30 +0000 (10:59 +0800)]
selftests: net: fib_tests: remove duplicate log test
The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.
Reported-by: Antoine Tenart <atenart@redhat.com>
Fixes:
0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bongsu Jeon [Mon, 18 Jan 2021 20:55:22 +0000 (05:55 +0900)]
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0
but there is no parameters in NCI1.x.
Fixes:
bcd684aace34 ("net/nfc/nci: Support NCI 2.x initial sequence")
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Mon, 18 Jan 2021 15:08:12 +0000 (16:08 +0100)]
sh_eth: Fix power down vs. is_opened flag ordering
sh_eth_close() does a synchronous power down of the device before
marking it closed. Revert the order, to make sure the device is never
marked opened while suspended.
While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as
there is no reason to do a synchronous power down.
Fixes:
7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan [Sun, 17 Jan 2021 15:15:38 +0000 (17:15 +0200)]
net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.
Fixes:
14136564c8ee ("net: Add TLS RX offload feature")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 19 Jan 2021 21:54:32 +0000 (13:54 -0800)]
Merge branch 'ipv4-ensure-ecn-bits-don-t-influence-source-address-validation'
Guillaume Nault says:
====================
ipv4: Ensure ECN bits don't influence source address validation
Functions that end up calling fib_table_lookup() should clear the ECN
bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated
differently.
Most functions already clear the ECN bits, but there are a few cases
where this is not done. This series only fixes the ones related to
source address validation.
====================
Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Sat, 16 Jan 2021 10:44:26 +0000 (11:44 +0100)]
netfilter: rpfilter: mask ecn bits before fib lookup
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.
Reproducer:
Create two netns, connected with a veth:
$ ip netns add ns0
$ ip netns add ns1
$ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
$ ip -netns ns0 link set dev veth01 up
$ ip -netns ns1 link set dev veth10 up
$ ip -netns ns0 address add 192.0.2.10/32 dev veth01
$ ip -netns ns1 address add 192.0.2.11/32 dev veth10
Add a route to ns1 in ns0:
$ ip -netns ns0 route add 192.0.2.11/32 dev veth01
In ns1, only packets with TOS 4 can be routed to ns0:
$ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10
Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
is 4:
$ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1)
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0)
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE
... 0% packet loss ...
Now use iptable's rpfilter module in ns1:
$ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP
Not-ECT and ECT(1) packets still pass:
$ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT
... 0% packet loss ...
$ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1)
... 0% packet loss ...
But ECT(0) and ECN packets are dropped:
$ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0)
... 100% packet loss ...
$ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE
... 100% packet loss ...
After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.
Fixes:
8f97339d3feb ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Sat, 16 Jan 2021 10:44:22 +0000 (11:44 +0100)]
udp: mask TOS bits in udp_v4_early_demux()
udp_v4_early_demux() is the only function that calls
ip_mc_validate_source() with a TOS that hasn't been masked with
IPTOS_RT_MASK.
This results in different behaviours for incoming multicast UDPv4
packets, depending on if ip_mc_validate_source() is called from the
early-demux path (udp_v4_early_demux) or from the regular input path
(ip_route_input_noref).
ECN would normally not be used with UDP multicast packets, so the
practical consequences should be limited on that side. However,
IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align
with the non-early-demux path behaviour.
Reproducer:
Setup two netns, connected with veth:
$ ip netns add ns0
$ ip netns add ns1
$ ip -netns ns0 link set dev lo up
$ ip -netns ns1 link set dev lo up
$ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
$ ip -netns ns0 link set dev veth01 up
$ ip -netns ns1 link set dev veth10 up
$ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01
$ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10
In ns0, add route to multicast address 224.0.2.0/24 using source
address 198.51.100.10:
$ ip -netns ns0 address add 198.51.100.10/32 dev lo
$ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10
In ns1, define route to 198.51.100.10, only for packets with TOS 4:
$ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10
Also activate rp_filter in ns1, so that incoming packets not matching
the above route get dropped:
$ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1
Now try to receive packets on 224.0.2.11:
$ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof -
In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is,
tos 6 for socat):
$ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6
The "test0" message is properly received by socat in ns1, because
early-demux has no cached dst to use, so source address validation
is done by ip_route_input_mc(), which receives a TOS that has the
ECN bits masked.
Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0):
$ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6
The "test1" message isn't received by socat in ns1, because, now,
early-demux has a cached dst to use and calls ip_mc_validate_source()
immediately, without masking the ECN bits.
Fixes:
bc044e8db796 ("udp: perform source validation for mcast early demux")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxim Mikityanskiy [Mon, 18 Jan 2021 16:03:33 +0000 (18:03 +0200)]
xsk: Clear pool even for inactive queues
The number of queues can change by other means, rather than ethtool. For
example, attaching an mqprio qdisc with num_tc > 1 leads to creating
multiple sets of TX queues, which may be then destroyed when mqprio is
deleted. If an AF_XDP socket is created while mqprio is active,
dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may
decrease with deletion of mqprio, which will mean that the pool won't be
NULLed, and a further increase of the number of TX queues may expose a
dangling pointer.
To avoid any potential misbehavior, this commit clears pool for RX and
TX queues, regardless of real_num_*_queues, still taking into
consideration num_*_queues to avoid overflows.
Fixes:
1c1efc2af158 ("xsk: Create and free buffer pool independently from umem")
Fixes:
a41b4f3c58dd ("xsk: simplify xdp_clear_umem_at_qid implementation")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
Linus Torvalds [Tue, 19 Jan 2021 21:26:05 +0000 (13:26 -0800)]
Merge tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block
Pull task_work fix from Jens Axboe:
"The TIF_NOTIFY_SIGNAL change inadvertently removed the unconditional
task_work run we had in get_signal().
This caused a regression for some setups, since we're relying on eg
____fput() being run to close and release, for example, a pipe and
wake the other end.
For 5.11, I prefer the simple solution of just reinstating the
unconditional run, even if it conceptually doesn't make much sense -
if you need that kind of guarantee, you should be using TWA_SIGNAL
instead of TWA_NOTIFY. But it's the trivial fix for 5.11, and would
ensure that other potential gotchas/assumptions for task_work don't
regress for 5.11.
We're looking into further simplifying the task_work notifications for
5.12 which would resolve that too"
* tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block:
task_work: unconditionally run task_work from get_signal()
Mircea Cirjaliu [Tue, 19 Jan 2021 20:53:18 +0000 (21:53 +0100)]
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem()
instead of bpf_map_pop_elem(). In practice it may have been less likely
hit when under JIT given shielded via
84430d4232c3 ("bpf, verifier: avoid
retpoline for map push/pop/peek operation").
Fixes:
f1a2e44a3aec ("bpf: add queue and stack maps")
Signed-off-by: Mircea Cirjaliu <mcirjaliu@bitdefender.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com>
Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
Linus Torvalds [Tue, 19 Jan 2021 21:01:50 +0000 (13:01 -0800)]
Merge tag 'nfsd-5.11-2' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Avoid exposing parent of root directory in NFSv3 READDIRPLUS results
- Fix a tracepoint change that went in the initial 5.11 merge
* tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Move the svc_xdr_recvfrom tracepoint again
nfsd4: readdirplus shouldn't return parent of export
Linus Torvalds [Tue, 19 Jan 2021 20:58:55 +0000 (12:58 -0800)]
Merge tag 'hyperv-fixes-signed-
20210119' of git://git./linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Dexuan to fix clockevent initialization"
* tag 'hyperv-fixes-signed-
20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Initialize clockevents after LAPIC is initialized
Jakub Kicinski [Tue, 19 Jan 2021 20:02:22 +0000 (12:02 -0800)]
Merge branch 'sh_eth-fix-reboot-crash'
Geert Uytterhoeven says:
====================
sh_eth: Fix reboot crash
This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth
device is not opened will cause a crash.
Changes compared to v1:
- Export mdiobb_{read,write}(),
- Call mdiobb_{read,write}() now they are exported,
- Use mii_bus.parent to avoid bb_info.dev copy,
- Drop RFC state.
Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers
itself, and use them either manually (through a new parameter to
alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or
automatically (e.g. if pm_runtime_enabled() returns true). Note that
the latter requires a "struct device *" parameter to operate on.
Currently there are only two drivers that call alloc_mdio_bitbang() and
use Runtime PM: the Renesas sh_eth and ravb drivers. This series fixes
the former, while the latter is not affected (it keeps the device
powered all the time between driver probe and driver unbind, and
changing that seems to be non-trivial).
====================
Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Mon, 18 Jan 2021 15:06:56 +0000 (16:06 +0100)]
sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
Wolfram reports that his R-Car H2-based Lager board can no longer be
rebooted in v5.11-rc1, as it crashes with an imprecise external abort.
The issue can be reproduced on other boards (e.g. Koelsch with R-Car
M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is
down at reboot time:
Unhandled fault: imprecise external abort (0x1406) at 0x00000000
pgd = (ptrval)
[
00000000] *pgd=
422b6835, *pte=
00000000, *ppte=
00000000
Internal error: : 1406 [#1] ARM
Modules linked in:
CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
PC is at sh_mdio_ctrl+0x44/0x60
LR is at sh_mmd_ctrl+0x20/0x24
...
Backtrace:
[<
c0451f30>] (sh_mdio_ctrl) from [<
c0451fd4>] (sh_mmd_ctrl+0x20/0x24)
r7:
0000001f r6:
00000020 r5:
00000002 r4:
c22a1dc4
[<
c0451fb4>] (sh_mmd_ctrl) from [<
c044fc18>] (mdiobb_cmd+0x38/0xa8)
[<
c044fbe0>] (mdiobb_cmd) from [<
c044feb8>] (mdiobb_read+0x58/0xdc)
r9:
c229f844 r8:
c0c329dc r7:
c221e000 r6:
00000001 r5:
c22a1dc4 r4:
00000001
[<
c044fe60>] (mdiobb_read) from [<
c044c854>] (__mdiobus_read+0x74/0xe0)
r7:
0000001f r6:
00000001 r5:
c221e000 r4:
c221e000
[<
c044c7e0>] (__mdiobus_read) from [<
c044c9d8>] (mdiobus_read+0x40/0x54)
r7:
0000001f r6:
00000001 r5:
c221e000 r4:
c221e458
[<
c044c998>] (mdiobus_read) from [<
c044d678>] (phy_read+0x1c/0x20)
r7:
ffffe000 r6:
c221e470 r5:
00000200 r4:
c229f800
[<
c044d65c>] (phy_read) from [<
c044d94c>] (kszphy_config_intr+0x44/0x80)
[<
c044d908>] (kszphy_config_intr) from [<
c044694c>] (phy_disable_interrupts+0x44/0x50)
r5:
c229f800 r4:
c229f800
[<
c0446908>] (phy_disable_interrupts) from [<
c0449370>] (phy_shutdown+0x18/0x1c)
r5:
c229f800 r4:
c229f804
[<
c0449358>] (phy_shutdown) from [<
c040066c>] (device_shutdown+0x168/0x1f8)
[<
c0400504>] (device_shutdown) from [<
c013de44>] (kernel_restart_prepare+0x3c/0x48)
r9:
c22d2000 r8:
c0100264 r7:
c0b0d034 r6:
00000000 r5:
4321fedc r4:
00000000
[<
c013de08>] (kernel_restart_prepare) from [<
c013dee0>] (kernel_restart+0x1c/0x60)
[<
c013dec4>] (kernel_restart) from [<
c013e1d8>] (__do_sys_reboot+0x168/0x208)
r5:
4321fedc r4:
01234567
[<
c013e070>] (__do_sys_reboot) from [<
c013e2e8>] (sys_reboot+0x18/0x1c)
r7:
00000058 r6:
00000000 r5:
00000000 r4:
00000000
[<
c013e2d0>] (sys_reboot) from [<
c0100060>] (ret_fast_syscall+0x0/0x54)
As of commit
e2f016cf775129c0 ("net: phy: add a shutdown procedure"),
system reboot calls phy_disable_interrupts() during shutdown. As this
happens unconditionally, the PHY registers may be accessed while the
device is suspended, causing undefined behavior, which may crash the
system.
Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by
wrappers that take care of Runtime PM, to resume the device when needed.
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geert Uytterhoeven [Mon, 18 Jan 2021 15:06:55 +0000 (16:06 +0100)]
mdio-bitbang: Export mdiobb_{read,write}()
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers
can call them from their MDIO read/write wrappers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksandr Mazur [Tue, 19 Jan 2021 08:53:33 +0000 (10:53 +0200)]
net: core: devlink: use right genl user_ptr when handling port param get/set
Fix incorrect user_ptr dereferencing when handling port param get/set:
idx [0] stores the 'struct devlink' pointer;
idx [1] stores the 'struct devlink_port' pointer;
Fixes:
637989b5d77e ("devlink: Always use user_ptr[0] for devlink and simplify post_doit")
CC: Parav Pandit <parav@mellanox.com>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enke Chen [Fri, 15 Jan 2021 22:30:58 +0000 (14:30 -0800)]
tcp: fix TCP_USER_TIMEOUT with zero window
The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.
The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():
RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
as long as the receiver continues to respond probes. We support
this by default and reset icsk_probes_out with incoming ACKs.
This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.
In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.
Fixes:
9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall <william.mccall@gmail.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 19 Jan 2021 03:53:05 +0000 (19:53 -0800)]
Merge branch 'ipv6-fixes-for-the-multicast-routes'
Matteo Croce says:
====================
ipv6: fixes for the multicast routes
Fix two wrong flags in the IPv6 multicast routes created
by the autoconf code.
====================
Link: https://lore.kernel.org/r/20210115184209.78611-1-mcroce@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matteo Croce [Fri, 15 Jan 2021 18:42:09 +0000 (19:42 +0100)]
ipv6: set multicast flag on the multicast route
The multicast route ff00::/8 is created with type RTN_UNICAST:
$ ip -6 -d route
unicast ::1 dev lo proto kernel scope global metric 256 pref medium
unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium
Set the type to RTN_MULTICAST which is more appropriate.
Fixes:
e8478e80e5a7 ("net/ipv6: Save route type in rt6_info")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matteo Croce [Fri, 15 Jan 2021 18:42:08 +0000 (19:42 +0100)]
ipv6: create multicast route with RTPROT_KERNEL
The ff00::/8 multicast route is created without specifying the fc_protocol
field, so the default RTPROT_BOOT value is used:
$ ip -6 -d route
unicast ::1 dev lo proto kernel scope global metric 256 pref medium
unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium
As the documentation says, this value identifies routes installed during
boot, but the route is created when interface is set up.
Change the value to RTPROT_KERNEL which is a better value.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 18 Jan 2021 22:23:57 +0000 (14:23 -0800)]
Merge tag 'mac80211-for-net-2021-01-18.2' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Various fixes:
* kernel-doc parsing fixes
* incorrect debugfs string checks
* locking fix in regulatory
* some encryption-related fixes
* tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: check if atf has been disabled in __ieee80211_schedule_txq
mac80211: do not drop tx nulldata packets on encrypted links
mac80211: fix encryption key selection for 802.3 xmit
mac80211: fix fast-rx encryption check
mac80211: fix incorrect strlen of .write in debugfs
cfg80211: fix a kerneldoc markup
cfg80211: Save the regulatory domain with a lock
cfg80211/mac80211: fix kernel-doc for SAR APIs
====================
Link: https://lore.kernel.org/r/20210118204750.7243-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rasmus Villemoes [Sat, 16 Jan 2021 02:39:35 +0000 (03:39 +0100)]
net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnext
mv88e6xxx_port_vlan_join checks whether the VTU already contains an
entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely
changes the relevant .member[] element and loads the updated entry
into the VTU.
However, at least for the mv88e6250, the on-stack struct
mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly
initialized, neither in mv88e6xxx_port_vlan_join() nor inside the
getnext implementation. So the new entry has random garbage for the
STU bits, breaking VLAN filtering.
When the VTU entry is initially created, those bits are all zero, and
we should make sure to keep them that way when the entry is updated.
Fixes:
92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 18 Jan 2021 13:52:10 +0000 (15:52 +0200)]
net: mscc: ocelot: allow offloading of bridge on top of LAG
The blamed commit was too aggressive, and it made ocelot_netdevice_event
react only to network interface events emitted for the ocelot switch
ports.
In fact, only the PRECHANGEUPPER should have had that check.
When we ignore all events that are not for us, we miss the fact that the
upper of the LAG changes, and the bonding interface gets enslaved to a
bridge. This is an operation we could offload under certain conditions.
Fixes:
7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 18 Jan 2021 19:23:05 +0000 (11:23 -0800)]
Merge tag 'spi-fix-v5.11-rc4' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more bug fixes for SPI, both driver specific ones. The caching
in the Cadence driver is to avoid a deadlock trying to retrieve the
cached value later at runtime"
* tag 'spi-fix-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence: cache reference clock rate during probe
spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode
Linus Torvalds [Mon, 18 Jan 2021 19:17:18 +0000 (11:17 -0800)]
Merge tag 'fixes-2021-01-18' of git://git./linux/kernel/git/rppt/memblock
Pull ia64 build fix from Mike Rapoport:
"Fix an ia64 build failure caused by memory model changes"
* tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
ia64: fix build failure caused by memory model changes
Linus Torvalds [Mon, 18 Jan 2021 19:07:18 +0000 (11:07 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"A Kconfig dependency issue with omap-sham and a divide by zero in xor
on some platforms"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: omap-sham - Fix link error without crypto-engine
crypto: xor - Fix divide error in do_xor_speed()
Randy Dunlap [Fri, 15 Jan 2021 19:11:23 +0000 (11:11 -0800)]
x86/xen: fix 'nopvspin' build error
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled.
Fixes this build error:
../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’:
../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function)
nopvspin = true;
Fixes:
3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210115191123.27572-1-rdunlap@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Linus Torvalds [Mon, 18 Jan 2021 00:37:05 +0000 (16:37 -0800)]
Linux 5.11-rc4
Linus Torvalds [Sun, 17 Jan 2021 21:14:46 +0000 (13:14 -0800)]
Merge tag 'perf-tools-fixes-2021-01-17' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'CPU too large' error in Intel PT
- Correct event attribute sizes in 'perf inject'
- Sync build_bug.h and kvm.h kernel copies
- Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example
- libbpf tests fixes
- Fix shadow stat 'perf test' for non-bash shells
- Take cgroups into account for shadow stats in 'perf stat'
* tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf inject: Correct event attribute sizes
perf intel-pt: Fix 'CPU too large' error
perf stat: Take cgroups into account for shadow stats
perf stat: Introduce struct runtime_stat_data
libperf tests: Fail when failing to get a tracepoint id
libperf tests: If a test fails return non-zero
libperf tests: Avoid uninitialized variable warning
perf test: Fix shadow stat test for non-bash shells
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf bpf examples: Fix bpf.h header include directive in 5sec.c example
Linus Torvalds [Sun, 17 Jan 2021 20:28:58 +0000 (12:28 -0800)]
Merge tag 'powerpc-5.11-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a lack of alignment in our linker script, that can lead to
crashes depending on configuration etc.
One fix for the 32-bit VDSO after the C VDSO conversion.
Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy"
* tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Fix clock_gettime_fallback for vdso32
powerpc: Fix alignment bug within the init sections
Linus Torvalds [Sun, 17 Jan 2021 20:16:47 +0000 (12:16 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull misc vfs fixes from Al Viro:
"Several assorted fixes.
I still think that audit ->d_name race is better fixed this way for
the benefit of backports, with any possibly fancier variants done on
top of it"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
dump_common_audit_data(): fix racy accesses to ->d_name
iov_iter: fix the uaccess area in copy_compat_iovec_from_user
umount(2): move the flag validity checks first
Linus Torvalds [Sat, 16 Jan 2021 23:34:57 +0000 (15:34 -0800)]
mm: don't put pinned pages into the swap cache
So technically there is nothing wrong with adding a pinned page to the
swap cache, but the pinning obviously means that the page can't actually
be free'd right now anyway, so it's a bit pointless.
However, the real problem is not with it being a bit pointless: the real
issue is that after we've added it to the swap cache, we'll try to unmap
the page. That will succeed, because the code in mm/rmap.c doesn't know
or care about pinned pages.
Even the unmapping isn't fatal per se, since the page will stay around
in memory due to the pinning, and we do hold the connection to it using
the swap cache. But when we then touch it next and take a page fault,
the logic in do_swap_page() will map it back into the process as a
possibly read-only page, and we'll then break the page association on
the next COW fault.
Honestly, this issue could have been fixed in any of those other places:
(a) we could refuse to unmap a pinned page (which makes conceptual
sense), or (b) we could make sure to re-map a pinned page writably in
do_swap_page(), or (c) we could just make do_wp_page() not COW the
pinned page (which was what we historically did before that "mm:
do_wp_page() simplification" commit).
But while all of them are equally valid models for breaking this chain,
not putting pinned pages into the swap cache in the first place is the
simplest one by far.
It's also the safest one: the reason why do_wp_page() was changed in the
first place was that getting the "can I re-use this page" wrong is so
fraught with errors. If you do it wrong, you end up with an incorrectly
shared page.
As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or
do_swap_page() would be a serious bug since it is only a (very good)
heuristic. Re-using the page requires a hard black-and-white rule with
no room for ambiguity.
In contrast, saying "this page is very likely dma pinned, so let's not
add it to the swap cache and try to unmap it" is an obviously safe thing
to do, and if the heuristic might very rarely be a false positive, no
harm is done.
Fixes:
09854ba94c6a ("mm: do_wp_page() simplification")
Reported-and-tested-by: Martin Raiber <martin@urbackup.org>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dexuan Cui [Sat, 16 Jan 2021 22:31:36 +0000 (14:31 -0800)]
x86/hyperv: Initialize clockevents after LAPIC is initialized
With commit
4df4cb9e99f8, the Hyper-V direct-mode STIMER is actually
initialized before LAPIC is initialized: see
apic_intr_mode_init()
x86_platform.apic_post_init()
hyperv_init()
hv_stimer_alloc()
apic_bsp_setup()
setup_local_APIC()
setup_local_APIC() temporarily disables LAPIC, initializes it and
re-eanble it. The direct-mode STIMER depends on LAPIC, and when it's
registered, it can be programmed immediately and the timer can fire
very soon:
hv_stimer_init
clockevents_config_and_register
clockevents_register_device
tick_check_new_device
tick_setup_device
tick_setup_periodic(), tick_setup_oneshot()
clockevents_program_event
When the timer fires in the hypervisor, if the LAPIC is in the
disabled state, new versions of Hyper-V ignore the event and don't inject
the timer interrupt into the VM, and hence the VM hangs when it boots.
Note: when the VM starts/reboots, the LAPIC is pre-enabled by the
firmware, so the window of LAPIC being temporarily disabled is pretty
small, and the issue can only happen once out of 100~200 reboots for
a 40-vCPU VM on one dev host, and on another host the issue doesn't
reproduce after 2000 reboots.
The issue is more noticeable for kdump/kexec, because the LAPIC is
disabled by the first kernel, and stays disabled until the kdump/kexec
kernel enables it. This is especially an issue to a Generation-2 VM
(for which Hyper-V doesn't emulate the PIT timer) when CONFIG_HZ=1000
(rather than CONFIG_HZ=250) is used.
Fix the issue by moving hv_stimer_alloc() to a later place where the
LAPIC timer is initialized.
Fixes:
4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210116223136.13892-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Mike Rapoport [Fri, 18 Dec 2020 16:35:50 +0000 (18:35 +0200)]
ia64: fix build failure caused by memory model changes
The change of ia64's default memory model to SPARSEMEM causes defconfig
build to fail:
CC kernel/async.o
In file included from include/linux/numa.h:25,
from include/linux/async.h:13,
from kernel/async.c:47:
arch/ia64/include/asm/sparsemem.h:14:40: warning: "PAGE_SHIFT" is not defined, evaluates to 0 [-Wundef]
14 | #if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
| ^~~~~~~~~~
In file included from include/linux/gfp.h:6,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:19,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/energy_model.h:7,
from include/linux/device.h:16,
from include/linux/async.h:14,
from kernel/async.c:47:
include/linux/mmzone.h:1156:2: error: #error Allocator MAX_ORDER exceeds SECTION_SIZE
1156 | #error Allocator MAX_ORDER exceeds SECTION_SIZE
| ^~~~~
The error cause is the missing definition of PAGE_SHIFT in the calculation
of SECTION_SIZE_BITS.
Add include of <asm/page.h> to arch/ia64/include/asm/sparsemem.h to solve
the problem.
Fixes:
214496cb1870 ("ia64: make SPARSEMEM default and disable DISCONTIGMEM")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Alexander Lobakin [Fri, 15 Jan 2021 15:04:40 +0000 (15:04 +0000)]
skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too
Commit
3226b158e67c ("net: avoid 32 x truesize under-estimation for
tiny skbs") ensured that skbs with data size lower than 1025 bytes
will be kmalloc'ed to avoid excessive page cache fragmentation and
memory consumption.
However, the fix adressed only __napi_alloc_skb() (primarily for
virtio_net and napi_get_frags()), but the issue can still be achieved
through __netdev_alloc_skb(), which is still used by several drivers.
Drivers often allocate a tiny skb for headers and place the rest of
the frame to frags (so-called copybreak).
Mirror the condition to __netdev_alloc_skb() to handle this case too.
Since v1 [0]:
- fix "Fixes:" tag;
- refine commit message (mention copybreak usecase).
[0] https://lore.kernel.org/netdev/
20210114235423.232737-1-alobakin@pm.me
Fixes:
a1c7fff7e18f ("net: netdev_alloc_skb() use build_skb()")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210115150354.85967-1-alobakin@pm.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Sat, 16 Jan 2021 20:25:40 +0000 (12:25 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine minor fixes, seven in drivers and two in the core SCSI disk
driver (sd) which should be harmless involving removing an unused
variable and quietening a spurious warning"
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Remove obsolete variable in sd_remove()
scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
scsi: scsi_debug: Fix memleak in scsi_debug_init()
scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility"
scsi: qedi: Correct max length of CHAP secret
scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
scsi: ufs: Relocate flush of exceptional event
scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
scsi: ufs: Fix possible power drain during system suspend
Al Viro [Tue, 5 Jan 2021 19:43:46 +0000 (14:43 -0500)]
dump_common_audit_data(): fix racy accesses to ->d_name
We are not guaranteed the locking environment that would prevent
dentry getting renamed right under us. And it's possible for
old long name to be freed after rename, leading to UAF here.
Cc: stable@kernel.org # v2.6.2+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 16 Jan 2021 19:39:58 +0000 (11:39 -0800)]
Merge tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just an nvme pull request via Christoph:
- don't initialize hwmon for discover controllers (Sagi Grimberg)
- fix iov_iter handling in nvme-tcp (Sagi Grimberg)
- fix a preempt warning in nvme-tcp (Sagi Grimberg)
- fix a possible NULL pointer dereference in nvme (Israel Rukshin)"
* tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
nvme: don't intialize hwmon for discovery controllers
nvme-tcp: fix possible data corruption with bio merges
nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT
nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
Linus Torvalds [Sat, 16 Jan 2021 19:12:02 +0000 (11:12 -0800)]
Merge tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"We still have a pending fix for a cancelation issue, but it's still
being investigated. In the meantime:
- Dead mm handling fix (Pavel)
- SQPOLL setup error handling (Pavel)
- Flush timeout sequence fix (Marcelo)
- Missing finish_wait() for one exit case"
* tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()
io_uring: flush timeouts that should already have expired
io_uring: do sqo disable on install_fd error
io_uring: fix null-deref in io_disable_sqo_submit
io_uring: don't take files/mm for a dead task
io_uring: drop mm and files after task_work_run
Linus Torvalds [Sat, 16 Jan 2021 19:00:08 +0000 (11:00 -0800)]
Merge tag 'riscv-for-linus-5.11-rc4' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"There are a few more fixes than a normal rc4, largely due to the
bubble introduced by the holiday break:
- return -ENOSYS for syscall number -1, which previously returned an
uninitialized value.
- ensure of_clk_init() has been called in time_init(), without which
clock drivers may not be initialized.
- fix sifive,uart0 driver to properly display the baud rate. A fix to
initialize MPIE that allows interrupts to be processed during
system calls.
- avoid erronously begin tracing IRQs when interrupts are disabled,
which at least triggers suprious lockdep failures.
- workaround for a warning related to calling smp_processor_id()
while preemptible. The warning itself is suprious on currently
availiable systems.
- properly include the generic time VDSO calls. A fix to our kasan
address mapping. A fix to the HiFive Unleashed device tree, which
allows the Ethernet PHY to be properly initialized by Linux (as
opposed to relying on the bootloader).
- defconfig update to include SiFive's GPIO driver, which is present
on the HiFive Unleashed and necessary to initialize the PHY.
- avoid allocating memory while initializing reserved memory.
- avoid allocating the last 4K of memory, as pointers there alias
with syscall errors.
There are also two cleanups that should have no functional effect but
do fix build warnings:
- drop a duplicated definition of PAGE_KERNEL_EXEC.
- properly declare the asm register SP shim.
- cleanup the rv32 memory size Kconfig entry, to reflect the actual
size of memory availiable"
* tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix maximum allowed phsyical memory for RV32
RISC-V: Set current memblock limit
RISC-V: Do not allocate memblock while iterating reserved memblocks
riscv: stacktrace: Move register keyword to beginning of declaration
riscv: defconfig: enable gpio support for HiFive Unleashed
dts: phy: add GPIO number and active state used for phy reset
dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
riscv: Fix KASAN memory mapping.
riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
riscv: cacheinfo: Fix using smp_processor_id() in preemptible
riscv: Trace irq on only interrupt is enabled
riscv: Drop a duplicated PAGE_KERNEL_EXEC
riscv: Enable interrupts during syscalls with M-Mode
riscv: Fix sifive serial driver
riscv: Fix kernel time_init()
riscv: return -ENOSYS for syscall -1
Linus Torvalds [Sun, 10 Jan 2021 01:09:10 +0000 (17:09 -0800)]
mm: don't play games with pinned pages in clear_page_refs
Turning a pinned page read-only breaks the pinning after COW. Don't do it.
The whole "track page soft dirty" state doesn't work with pinned pages
anyway, since the page might be dirtied by the pinning entity without
ever being noticed in the page tables.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 8 Jan 2021 21:13:41 +0000 (13:13 -0800)]
mm: fix clear_refs_write locking
Turning page table entries read-only requires the mmap_sem held for
writing.
So stop doing the odd games with turning things from read locks to write
locks and back. Just get the write lock.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Atish Patra [Mon, 11 Jan 2021 23:45:04 +0000 (15:45 -0800)]
RISC-V: Fix maximum allowed phsyical memory for RV32
Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Atish Patra [Mon, 11 Jan 2021 23:45:02 +0000 (15:45 -0800)]
RISC-V: Set current memblock limit
Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.
Fix this issue by limiting the memblock if available memory spans the
entire address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Atish Patra [Mon, 11 Jan 2021 23:45:01 +0000 (15:45 -0800)]
RISC-V: Do not allocate memblock while iterating reserved memblocks
Currently, resource tree allocates memory blocks while iterating on the
list. It leads to following kernel warning because memblock allocation
also invokes memory block reservation API.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795
__insert_resource+0x8e/0xd0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.10.0-00022-ge20097fb37e2-dirty #549
[ 0.000000] epc:
c00125c2 ra :
c001262c sp :
c1c01f50
[ 0.000000] gp :
c1d456e0 tp :
c1c0a980 t0 :
ffffcf20
[ 0.000000] t1 :
00000000 t2 :
00000000 s0 :
c1c01f60
[ 0.000000] s1 :
ffffcf00 a0 :
ffffff00 a1 :
c1c0c0c4
[ 0.000000] a2 :
80c12b15 a3 :
80402000 a4 :
80402000
[ 0.000000] a5 :
c1c0c0c4 a6 :
80c12b15 a7 :
f5faf600
[ 0.000000] s2 :
c1c0c0c4 s3 :
c1c0e000 s4 :
c1009a80
[ 0.000000] s5 :
c1c0c000 s6 :
c1d48000 s7 :
c1613b4c
[ 0.000000] s8 :
00000fff s9 :
80000200 s10:
c1613b40
[ 0.000000] s11:
00000000 t3 :
c1d4a000 t4 :
ffffffff
This is also unnecessary as we can pre-compute the total memblocks required
for each memory region and allocate it before the loop. It save precious
boot time not going through memblock allocation code every time.
Fixes:
00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree")
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Christoph Hellwig [Mon, 11 Jan 2021 17:19:26 +0000 (18:19 +0100)]
iov_iter: fix the uaccess area in copy_compat_iovec_from_user
sizeof needs to be called on the compat pointer, not the native one.
Fixes:
89cd35c58bc2 ("iov_iter: transparently handle compat iovecs in import_iovec")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric Dumazet [Thu, 14 Jan 2021 18:52:29 +0000 (10:52 -0800)]
net_sched: avoid shift-out-of-bounds in tcindex_set_parms()
tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT
attribute is not silly.
UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29
shift exponent 255 is too large for 32-bit type 'int'
CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
valid_perfect_hash net/sched/cls_tcindex.c:260 [inline]
tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425
tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546
tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127
rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2336
___sys_sendmsg+0xf3/0x170 net/socket.c:2390
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2423
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114185229.1742255-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 14 Jan 2021 18:19:29 +0000 (10:19 -0800)]
net_sched: gen_estimator: support large ewma log
syzbot report reminded us that very big ewma_log were supported in the past,
even if they made litle sense.
tc qdisc replace dev xxx root est 1sec 131072sec ...
While fixing the bug, also add boundary checks for ewma_log, in line
with range supported by iproute2.
UBSAN: shift-out-of-bounds in net/core/gen_estimator.c:83:38
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
est_timer.cold+0xbb/0x12d net/core/gen_estimator.c:83
call_timer_fn+0x1a5/0x710 kernel/time/timer.c:1417
expire_timers kernel/time/timer.c:1462 [inline]
__run_timers.part.0+0x692/0xa80 kernel/time/timer.c:1731
__run_timers kernel/time/timer.c:1712 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1744
__do_softirq+0x2bc/0xa77 kernel/softirq.c:343
asm_call_irq_on_stack+0xf/0x20
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
do_softirq_own_stack+0xaa/0xd0 arch/x86/kernel/irq_64.c:77
invoke_softirq kernel/softirq.c:226 [inline]
__irq_exit_rcu+0x17f/0x200 kernel/softirq.c:420
irq_exit_rcu+0x5/0x20 kernel/softirq.c:432
sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1096
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:628
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:79 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:169 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516
Fixes:
1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114181929.1717985-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 14 Jan 2021 16:06:37 +0000 (08:06 -0800)]
net_sched: reject silly cell_log in qdisc_get_rtab()
iproute2 probably never goes beyond 8 for the cell exponent,
but stick to the max shift exponent for signed 32bit.
UBSAN reported:
UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22
shift exponent 130 is too large for 32-bit type 'int'
CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x183/0x22e lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
__detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389
qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435
cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180
qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246
tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662
rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564
netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0x5a2/0x900 net/socket.c:2345
___sys_sendmsg net/socket.c:2399 [inline]
__sys_sendmsg+0x319/0x400 net/socket.c:2432
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210114160637.1660597-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Sat, 16 Jan 2021 02:01:17 +0000 (18:01 -0800)]
Merge tag 'for-5.11/dm-fixes-1' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM-raid's raid1 discard limits so discards work.
- Select missing Kconfig dependencies for DM integrity and zoned
targets.
- Four fixes for DM crypt target's support to optionally bypass kcryptd
workqueues.
- Fix DM snapshot merge supports missing data flushes before committing
metadata.
- Fix DM integrity data device flushing when external metadata is used.
- Fix DM integrity's maximum number of supported constructor arguments
that user can request when creating an integrity device.
- Eliminate DM core ioctl logging noise when an ioctl is issued without
required CAP_SYS_RAWIO permission.
* tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: defer decryption to a tasklet if interrupts disabled
dm integrity: fix the maximum number of arguments
dm crypt: do not call bio_endio() from the dm-crypt tasklet
dm integrity: fix flush with external metadata device
dm: eliminate potential source of excessive kernel log noise
dm snapshot: flush merged data before committing metadata
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
dm crypt: do not wait for backlogged crypto request completion in softirq
dm zoned: select CONFIG_CRC32
dm integrity: select CRYPTO_SKCIPHER
dm raid: fix discard limits for raid1
Jakub Kicinski [Sat, 16 Jan 2021 00:34:59 +0000 (16:34 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-16
1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in
link creation's error path causing a refcount underflow, from Jiri Olsa.
2) Fix BTF validation errors for the case where kernel modules don't declare
any new types and end up with an empty BTF, from Andrii Nakryiko.
3) Fix BPF local storage helpers to first check their {task,inode} owners for
being NULL before access, from KP Singh.
4) Fix a memory leak in BPF setsockopt handling for the case where optlen is
zero and thus temporary optval buffer should be freed, from Stanislav Fomichev.
5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for
raw_tracepoint caused by too big ctx_size_in, from Song Liu.
6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL}
registers were spilled to stack but not recognized, from Gilad Reti.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Update my email address
selftests/bpf: Add verifier test for PTR_TO_MEM spill
bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
bpf: Reject too big ctx_size_in for raw_tp test run
libbpf: Allow loading empty BTFs
bpf: Allow empty module BTFs
bpf: Don't leak memory in bpf getsockopt when optlen == 0
bpf: Update local storage test to check handling of null ptrs
bpf: Fix typo in bpf_inode_storage.c
bpf: Local storage helpers should check nullness of owner ptr passed
bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
====================
Link: https://lore.kernel.org/r/20210116002025.15706-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang [Fri, 15 Jan 2021 18:50:24 +0000 (10:50 -0800)]
cls_flower: call nla_ok() before nla_next()
fl_set_enc_opt() simply checks if there are still bytes left to parse,
but this is not sufficent as syzbot seems to be able to generate
malformatted netlink messages. nla_ok() is more strict so should be
used to validate the next nlattr here.
And nla_validate_nested_deprecated() has less strict check too, it is
probably too late to switch to the strict version, but we can just
call nla_ok() too after it.
Reported-and-tested-by: syzbot+2624e3778b18fc497c92@syzkaller.appspotmail.com
Fixes:
0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Fixes:
79b1011cb33d ("net: sched: allow flower to match erspan options")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210115185024.72298-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 15 Jan 2021 23:25:45 +0000 (15:25 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: MAINTAINERS and mm (slub,
pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure,
and process_vm_access)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/process_vm_access.c: include compat.h
mm,hwpoison: fix printing of page flags
MAINTAINERS: add Vlastimil as slab allocators maintainer
mm/hugetlb: fix potential missing huge page size info
mm: migrate: initialize err in do_migrate_pages
mm/vmalloc.c: fix potential memory leak
arm/kasan: fix the array size of kasan_early_shadow_pte[]
mm/memcontrol: fix warning in mem_cgroup_page_lruvec()
mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
mm, slub: consider rest of partial list if acquire_slab() fails
Linus Torvalds [Fri, 15 Jan 2021 23:14:40 +0000 (15:14 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A fairly modest set of bug fixes, nothing abnormal from the merge
window
The ucma patch is a bit on the larger side, but given the regression
was recently added I've opted to forward it to the rc stream.
- Fix a ucma memory leak introduced in v5.9 while fixing the
Syzkaller bugs
- Don't fail when the xarray wraps for user verbs objects
- User triggerable oops regression from the umem page size rework
- Error unwind bugs in usnic, ocrdma, mlx5 and cma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cma: Fix error flow in default_roce_mode_store
RDMA/mlx5: Fix wrong free of blue flame register on error
IB/mlx5: Fix error unwinding when set_has_smi_cap fails
RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two()
RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()
RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp
RDMA/restrack: Don't treat as an error allocation ID wrapping
RDMA/ucma: Do not miss ctx destruction steps in some cases
Jens Axboe [Fri, 15 Jan 2021 23:04:23 +0000 (16:04 -0700)]
io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()
If we enter with requests pending and performm cancelations, we'll have
a different inflight count before and after calling prepare_to_wait().
This causes the loop to restart. If we actually ended up canceling
everything, or everything completed in-between, then we'll break out
of the loop without calling finish_wait() on the waitqueue. This can
trigger a warning on exit_signals(), as we leave the task state in
TASK_UNINTERRUPTIBLE.
Put a finish_wait() after the loop to catch that case.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Björn Töpel [Fri, 15 Jan 2021 10:43:37 +0000 (11:43 +0100)]
MAINTAINERS: Update my email address
My Intel email will stop working in a not too distant future. Move my
MAINTAINERS entries to my kernel.org address.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210115104337.7751-1-bjorn.topel@gmail.com
Linus Torvalds [Fri, 15 Jan 2021 22:54:24 +0000 (14:54 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A number of bug fixes for ext4:
- Fix for the new fast_commit feature
- Fix some error handling codepaths in whiteout handling and
mountpoint sampling
- Fix how we write ext4_error information so it goes through the
journal when journalling is active, to avoid races that can lead to
lost error information, superblock checksum failures, or DIF/DIX
features"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove expensive flush on fast commit
ext4: fix bug for rename with RENAME_WHITEOUT
ext4: fix wrong list_splice in ext4_fc_cleanup
ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR
ext4: don't leak old mountpoint samples
ext4: drop ext4_handle_dirty_super()
ext4: fix superblock checksum failure when setting password salt
ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super()
ext4: save error info to sb through journal if available
ext4: protect superblock modifications with a buffer lock
ext4: drop sync argument of ext4_commit_super()
ext4: combine ext4_handle_error() and save_error_info()
Linus Torvalds [Fri, 15 Jan 2021 22:39:21 +0000 (14:39 -0800)]
Merge tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two small cifs fixes for stable (including an important handle leak
fix) and three small cleanup patches"
* tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: style: replace one-element array with flexible-array
cifs: connect: style: Simplify bool comparison
fs: cifs: remove unneeded variable in smb3_fs_context_dup
cifs: fix interrupted close commands
cifs: check pointer before freeing
Linus Torvalds [Fri, 15 Jan 2021 21:11:51 +0000 (13:11 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
Linus Torvalds [Fri, 15 Jan 2021 21:07:33 +0000 (13:07 -0800)]
Merge tag 'mips_fixes_5.11.1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix coredumps on 64bit kernels
- fix for alignment bugs preventing booting
- fix checking for failed irq_alloc_desc calls
* tag 'mips_fixes_5.11.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: OCTEON: fix unreachable code in octeon_irq_init_ciu
MIPS: relocatable: fix possible boot hangup with KASLR enabled
MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps
MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB
Al Grant [Tue, 24 Nov 2020 19:58:17 +0000 (19:58 +0000)]
perf inject: Correct event attribute sizes
When 'perf inject' reads a perf.data file from an older version of perf,
it writes event attributes into the output with the original size field,
but lays them out as if they had the size currently used. Readers see a
corrupt file. Update the size field to match the layout.
Signed-off-by: Al Grant <al.grant@foss.arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201124195818.30603-1-al.grant@arm.com
Signed-off-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 7 Jan 2021 17:41:59 +0000 (19:41 +0200)]
perf intel-pt: Fix 'CPU too large' error
In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:
Example on system with 8 cpus:
Before:
# echo 0 > /sys/devices/system/cpu/cpu2/online
# ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.147 MB perf.data ]
# ./perf script --itrace=e
Requested CPU 7 too large. Consider raising MAX_NR_CPUS
0x25908 [0x8]: failed to process type: 68 [Invalid argument]
After:
# ./perf script --itrace=e
#
Fixes:
8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes:
7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 15 Jan 2021 07:11:39 +0000 (16:11 +0900)]
perf stat: Take cgroups into account for shadow stats
As of now it doesn't consider cgroups when collecting shadow stats and
metrics so counter values from different cgroups will be saved in a same
slot. This resulted in incorrect numbers when those cgroups have
different workloads.
For example, let's look at the scenario below: cgroups A and C runs same
workload which burns a cpu while cgroup B runs a light workload.
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
3,958,116,522 cycles A
6,722,650,929 instructions A # 2.53 insn per cycle
1,132,741 cycles B
571,743 instructions B # 0.00 insn per cycle
4,007,799,935 cycles C
6,793,181,523 instructions C # 2.56 insn per cycle
1.
001050869 seconds time elapsed
When I run 'perf stat' with single workload, it usually shows IPC around
1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A.
But in this case, since cgroups are ignored, cycles are averaged so it
used the lower value for IPC calculation and resulted in around 2.5.
avg cycle: (
3958116522 + 1132741 +
4007799935) / 3 =
2655683066
IPC (A) :
6722650929 /
2655683066 = 2.531
IPC (B) : 571743 /
2655683066 = 0.0002
IPC (C) :
6793181523 /
2655683066 = 2.557
We can simply compare cgroup pointers in the evsel and it'll be NULL
when cgroups are not specified. With this patch, I can see correct
numbers like below:
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
4,171,051,687 cycles A
7,219,793,922 instructions A # 1.73 insn per cycle
1,051,189 cycles B
583,102 instructions B # 0.55 insn per cycle
4,171,124,710 cycles C
7,192,944,580 instructions C # 1.72 insn per cycle
1.
007909814 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 15 Jan 2021 07:11:38 +0000 (16:11 +0900)]
perf stat: Introduce struct runtime_stat_data
To pass more info to the saved_value in the runtime_stat, add a new
struct runtime_stat_data. Currently it only has 'ctx' field but later
patch will add more.
Note that we intentionally pass 0 as ctx to clock-related events for
compatibility. It was already there in a few places. So move the code
into the saved_value_lookup() explicitly and add a comment.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 14 Jan 2021 18:02:50 +0000 (10:02 -0800)]
libperf tests: Fail when failing to get a tracepoint id
Permissions are necessary to get a tracepoint id. Fail the test when the
read fails.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 14 Jan 2021 18:02:49 +0000 (10:02 -0800)]
libperf tests: If a test fails return non-zero
If a test fails return -1 rather than 0. This is consistent with the
return value in test-cpumap.c
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / platform / kernel / linux-rpi.git / log