signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT

commit 95bf9d646c3c3f95cb0be7e703b371db8da5be68 upstream.

When an instruction to save or restore a register from the stack fails
in _save_fp_context or _restore_fp_context return with -EFAULT.  This
change was made to r2300_fpu.S[1] but it looks like it got lost with
the introduction of EX2[2].  This is also what the other implementation
of _save_fp_context and _restore_fp_context in r4k_fpu.S does, and
what is needed for the callers to be able to handle the error.

Furthermore calling do_exit(SIGSEGV) from bad_stack is wrong because
it does not terminate the entire process it just terminates a single
thread.

As the changed code was the only caller of arch/mips/kernel/syscall.c:bad_stack
remove the problematic and now unused helper function.

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Maciej Rozycki <macro@orcam.me.uk>
Cc: linux-mips@vger.kernel.org
[1] 35938a00ba86 ("MIPS: Fix ISA I FP sigcontext access violation handling")
[2] f92722dc4545 ("MIPS: Correct MIPS I FP sigcontext layout")
Cc: stable@vger.kernel.org
Fixes: f92722dc4545 ("MIPS: Correct MIPS I FP sigcontext layout")
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lkml.kernel.org/r/20211020174406.17889-5-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode

commit fff53a551db50f5edecaa0b29a64056ab8d2bbca upstream.

This patch fixes 2 problems:
[1] The output warning logs and data loss when performing
mount/umount then remount the device with jffs2 format.
[2] The access width of SMWDR[0:1]/SMRDR[0:1] register is wrong.

This is the sample warning logs when performing mount/umount then
remount the device with jffs2 format:
jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x031c51d4:
Read 0x00034e00, calculated 0xadb272a7

The reason for issue [1] is that the writing data seems to
get messed up.
Data is only completed when the number of bytes is divisible by 4.
If you only have 3 bytes of data left to write, 1 garbage byte
is inserted after the end of the write stream.
If you only have 2 bytes of data left to write, 2 bytes of '00'
are added into the write stream.
If you only have 1 byte of data left to write, 2 bytes of '00'
are added into the write stream. 1 garbage byte is inserted after
the end of the write stream.

To solve problem [1], data must be written continuously in serial
and the write stream ends when data is out.

Following HW manual 62.2.15, access to SMWDR0 register should be
in the same size as the transfer size specified in the SPIDE[3:0]
bits in the manual mode enable setting register (SMENR).
Be sure to access from address 0.

So, in 16-bit transfer (SPIDE[3:0]=b'1100), SMWDR0 should be
accessed by 16-bit width.
Similar to SMWDR1, SMDDR0/1 registers.
In current code, SMWDR0 register is accessed by regmap_write()
that only set up to do 32-bit width.

To solve problem [2], data must be written 16-bit or 8-bit when
transferring 1-byte or 2-byte.

Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
[wsa: refactored to use regmap only via reg_read/reg_write]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922091007.5516-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Remove the bogus sigkill_pending in ptrace_stop

commit 7d613f9f72ec8f90ddefcae038fdae5adb8404b3 upstream.

The existence of sigkill_pending is a little silly as it is
functionally a duplicate of fatal_signal_pending that is used in
exactly one place.

Checking for pending fatal signals and returning early in ptrace_stop
is actively harmful.  It casues the ptrace_stop called by
ptrace_signal to return early before setting current->exit_code.
Later when ptrace_signal reads the signal number from
current->exit_code is undefined, making it unpredictable what will
happen.

Instead rely on the fact that schedule will not sleep if there is a
pending signal that can awaken a task.

Removing the explict sigkill_pending test fixes fixes ptrace_signal
when ptrace_stop does not stop because current->exit_code is always
set to to signr.

Cc: stable@vger.kernel.org
Fixes: 3d749b9e676b ("ptrace: simplify ptrace_stop()->sigkill_pending() path")
Fixes: 1a669c2f16d4 ("Add arch_ptrace_stop")
Link: https://lkml.kernel.org/r/87pmsyx29t.fsf@disp2133
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/qedr: Fix NULL deref for query_qp on the GSI QP

commit 4f960393a0ee9a39469ceb7c8077ae8db665cc12 upstream.

This patch fixes a crash caused by querying the QP via netlink, and
corrects the state of GSI qp. GSI qp's have a NULL qed_qp.

The call trace is generated by:
 $ rdma res show

 BUG: kernel NULL pointer dereference, address: 0000000000000034
 Hardware name: Dell Inc. PowerEdge R720/0M1GCR, BIOS 1.2.6 05/10/2012
 RIP: 0010:qed_rdma_query_qp+0x33/0x1a0 [qed]
 RSP: 0018:ffffba560a08f580 EFLAGS: 00010206
 RAX: 0000000200000000 RBX: ffffba560a08f5b8 RCX: 0000000000000000
 RDX: ffffba560a08f5b8 RSI: 0000000000000000 RDI: ffff9807ee458090
 RBP: ffffba560a08f5a0 R08: 0000000000000000 R09: ffff9807890e7048
 R10: ffffba560a08f658 R11: 0000000000000000 R12: 0000000000000000
 R13: ffff9807ee458090 R14: ffff9807f0afb000 R15: ffffba560a08f7ec
 FS:  00007fbbf8bfe740(0000) GS:ffff980aafa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000034 CR3: 00000001720ba001 CR4: 00000000000606f0
 Call Trace:
  qedr_query_qp+0x82/0x360 [qedr]
  ib_query_qp+0x34/0x40 [ib_core]
  ? ib_query_qp+0x34/0x40 [ib_core]
  fill_res_qp_entry_query.isra.26+0x47/0x1d0 [ib_core]
  ? __nla_put+0x20/0x30
  ? nla_put+0x33/0x40
  fill_res_qp_entry+0xe3/0x120 [ib_core]
  res_get_common_dumpit+0x3f8/0x5d0 [ib_core]
  ? fill_res_cm_id_entry+0x1f0/0x1f0 [ib_core]
  nldev_res_get_qp_dumpit+0x1a/0x20 [ib_core]
  netlink_dump+0x156/0x2f0
  __netlink_dump_start+0x1ab/0x260
  rdma_nl_rcv+0x1de/0x330 [ib_core]
  ? nldev_res_get_cm_id_dumpit+0x20/0x20 [ib_core]
  netlink_unicast+0x1b8/0x270
  netlink_sendmsg+0x33e/0x470
  sock_sendmsg+0x63/0x70
  __sys_sendto+0x13f/0x180
  ? setup_sgl.isra.12+0x70/0xc0
  __x64_sys_sendto+0x28/0x30
  do_syscall_64+0x3a/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: stable@vger.kernel.org
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/20211027184329.18454-1-palok@marvell.com
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/uncore: Fix Intel ICX IIO event constraints

commit f42e8a603c88f72bf047a710b9fc1d3579f31e71 upstream.

According to the latest uncore document, both NUM_OUTSTANDING_REQ_OF_CPU
(0x88) event and COMP_BUF_OCCUPANCY(0xd5) event also have constraints. Add
them into the event constraints table.

Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1629991963-102621-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/uncore: Support extra IMC channel on Ice Lake server

commit 496a18f09374ad89b3ab4366019bc3975db90234 upstream.

There are three channels on a Ice Lake server, but only two channels
will ever be active. Current perf only enables two channels.

Support the extra IMC channel, which may be activated on some Ice Lake
machines. For a non-activated channel, the SW can still access it. The
write will be ignored by the HW. 0 is always returned for the reading.

Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1629991963-102621-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: Fix module dev_oper_mode parameter description

commit 31f97cf9f0c31143a2a6fcc89c4a1286ce20157e upstream.

The module parameters are missing dev_oper_mode 12, BT classic alone,
add it. Moreover, the parameters encode newlines, which ends up being
printed malformed e.g. by modinfo, so fix that too.

However, the module parameter string is duplicated in both USB and SDIO
modules and the dev_oper_mode mode enumeration in those module parameters
is a duplicate of macros used by the driver. Furthermore, the enumeration
is confusing.

So, deduplicate the module parameter string and use __stringify() to
encode the correct mode enumeration values into the module parameter
string. Finally, replace 'Wi-Fi' with 'Wi-Fi alone' and 'BT' with
'BT classic alone' to clarify what those modes really mean.

Fixes: 898b255339310 ("rsi: add module parameter operating mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Karun Eagalapati <karun256@gmail.com>
Cc: Martin Fuzzey <martin.fuzzey@flowbird.group>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: netdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # 4.17+
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210916144245.10181-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix rate mask set leading to P2P failure

commit b515d097053a71d624e0c5840b42cd4caa653941 upstream.

P2P client mode was only working the first time.
On subsequent connection attempts the group was successfully created but
no data was sent (no transmitted data packets were seen with a sniffer).

The reason for this was that the hardware was being configured in fixed
rate mode with rate RSI_RATE_1 (1Mbps) which is not valid in the 5GHz band.

In P2P mode wpa_supplicant uses NL80211_CMD_SET_TX_BITRATE_MASK to disallow
the 11b rates in the 2.4GHz band which updated common->fixedrate_mask.

rsi_set_min_rate() then used the fixedrate_mask to calculate the minimum
allowed rate, or 0xffff = auto if none was found.
However that calculation did not account for the different rate sets
allowed in the different bands leading to the error.

Fixing set_min_rate() would result in 6Mb/s being used all the time
which is not what we want either.

The reason the problem did not occur on the first connection is that
rsi_mac80211_set_rate_mask() only updated the fixedrate_mask for
the *current* band. When it was called that was still 2.4GHz as the
switch is done later. So the when set_min_rate() was subsequently
called after the switch to 5GHz it still had a mask of zero, leading
to defaulting to auto mode.

Fix this by differentiating the case of a single rate being
requested, in which case the hardware will be used in fixed rate
mode with just that rate, and multiple rates being requested,
in which case we remain in auto mode but the firmware rate selection
algorithm is configured with a restricted set of rates.

Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1630337206-12410-4-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix key enabled check causing unwanted encryption for vap_id > 0

commit 99ac6018821253ec67f466086afb63fc18ea48e2 upstream.

My previous patch checked if encryption should be enabled by directly
checking info->control.hw_key (like the downstream driver).
However that missed that the control and driver_info members of
struct ieee80211_tx_info are union fields.

Due to this when rsi_core_xmit() updates fields in "tx_params"
(driver_info) it can overwrite the control.hw_key, causing the result
of the later test to be incorrect.

With the current structure layout the first byte of control.hw_key is
overlayed with the vap_id so, since we only test if control.hw_key is
NULL / non NULL, a non zero vap_id will incorrectly enable encryption.

In basic STA and AP modes the vap_id is always zero so it works but in
P2P client mode a second VIF is created causing vap_id to be non zero
and hence encryption to be enabled before keys have been set.

Fix this by extracting the key presence flag to a new field in the driver
private tx_params structure and populating it first.

Fixes: 314538041b56 ("rsi: fix AP mode with WPA failure due to encrypted EAPOL")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1630337206-12410-3-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix occasional initialisation failure with BT coex

commit 9b14ed6e11b72dd4806535449ca6c6962cb2369d upstream.

When BT coexistence is enabled (eg oper mode 13, which is the default)
the initialisation on startup sometimes silently fails.

In a normal initialisation we see
usb 1-1.3: Product: Wireless USB Network Module
usb 1-1.3: Manufacturer: Redpine Signals, Inc.
usb 1-1.3: SerialNumber: 000000000001
rsi_91x: rsi_probe: Initialized os intf ops
rsi_91x: rsi_load_9116_firmware: Loading chunk 0
rsi_91x: rsi_load_9116_firmware: Loading chunk 1
rsi_91x: rsi_load_9116_firmware: Loading chunk 2
rsi_91x: Max Stations Allowed = 1

But sometimes the last log is missing and the wlan net device is
not created.

Running a userspace loop that resets the hardware via a GPIO shows the
problem occurring ~5/100 resets.

The problem does not occur in oper mode 1 (wifi only).

Adding logs shows that the initialisation state machine requests a MAC
reset via rsi_send_reset_mac() but the firmware does not reply, leading
to the initialisation sequence being incomplete.

Fix this by delaying attaching the BT adapter until the wifi
initialisation has completed.

With this applied I have done > 300 reset loops with no errors.

Fixes: 716b840c7641 ("rsi: handle BT traffic in driver")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1630337206-12410-2-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wcn36xx: handle connection loss indication

commit d6dbce453b19c64b96f3e927b10230f9a704b504 upstream.

Firmware sends delete_sta_context_ind when it detects the AP has gone
away in STA mode. Right now the handler for that indication only handles
AP mode; fix it to also handle STA mode.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210901180606.11686-1-benl@squareup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: fix checking of DMA state

commit f971a85439bd25dc7b4d597cf5e4e8dc7ffc884b upstream.

Checking if DMA is enabled should be done via the
ata_dma_enabled helper function, since the init state
0xff indicates disabled.
This meant that ATA_CMD_READ_LOG_DMA_EXT was used and probed
for before DMA was enabled, which caused hangs for some combinations
of controllers and devices.
It might also have caused it to be incorrectly disabled as broken,
but there have been no reports of that.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195895
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: Try waking the firmware until we get an interrupt

commit 8e3e59c31fea5de95ffc52c46f0c562c39f20c59 upstream.

It seems that the PCIe+USB firmware (latest version 15.68.19.p21) of the
88W8897 card sometimes ignores or misses when we try to wake it up by
writing to the firmware status register. This leads to the firmware
wakeup timeout expiring and the driver resetting the card because we
assume the firmware has hung up or crashed.

Turns out that the firmware actually didn't hang up, but simply "missed"
our wakeup request and didn't send us an interrupt with an AWAKE event.

Trying again to read the firmware status register after a short timeout
usually makes the firmware wake up as expected, so add a small retry
loop to mwifiex_pm_wakeup_card() that looks at the interrupt status to
check whether the card woke up.

The number of tries and timeout lengths for this were determined
experimentally: The firmware usually takes about 500 us to wake up
after we attempt to read the status register. In some cases where the
firmware is very busy (for example while doing a bluetooth scan) it
might even miss our requests for multiple milliseconds, which is why
after 15 tries the waiting time gets increased to 10 ms. The maximum
number of tries it took to wake the firmware when testing this was
around 20, so a maximum number of 50 tries should give us plenty of
safety margin.

Here's a reproducer for those firmware wakeup failures I've found:

1) Make sure wifi powersaving is enabled (iw dev wlp1s0 set power_save on)
2) Connect to any wifi network (makes firmware go into wifi powersaving
mode, not deep sleep)
3) Make sure bluetooth is turned off (to ensure the firmware actually
enters powersave mode and doesn't keep the radio active doing bluetooth
stuff)
4) To confirm that wifi powersaving is entered ping a device on the LAN,
pings should be a few ms higher than without powersaving
5) Run "while true; do iwconfig; sleep 0.0001; done", this wakes and
suspends the firmware extremely often
6) Wait until things explode, for me it consistently takes <5 minutes

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211011133224.15561-3-verdre@v0yd.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: Read a PCI register after writing the TX ring write pointer

commit e5f4eb8223aa740237cd463246a7debcddf4eda1 upstream.

On the 88W8897 PCIe+USB card the firmware randomly crashes after setting
the TX ring write pointer. The issue is present in the latest firmware
version 15.68.19.p21 of the PCIe+USB card.

Those firmware crashes can be worked around by reading any PCI register
of the card after setting that register, so read the PCI_VENDOR_ID
register here. The reason this works is probably because we keep the bus
from entering an ASPM state for a bit longer, because that's what causes
the cards firmware to crash.

This fixes a bug where during RX/TX traffic and with ASPM L1 substates
enabled (the specific substates where the issue happens appear to be
platform dependent), the firmware crashes and eventually a command
timeout appears in the logs.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211011133224.15561-2-verdre@v0yd.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions

commit 928265e3601cde78c7e0a3e518a93b27defed3b1 upstream.

There is no reason to allow "syscore" devices to runtime-suspend
during system-wide PM transitions, because they are subject to the
same possible failure modes as any other devices in that respect.

Accordingly, change device_prepare() and device_complete() to call
pm_runtime_get_noresume() and pm_runtime_put(), respectively, for
"syscore" devices too.

Fixes: 057d51a1268f ("Merge branch 'pm-sleep'")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wcn36xx: Fix (QoS) null data frame bitrate/modulation

commit d3fd2c95c1c13ec217d43ebef3c61cfa00a6cd37 upstream.

We observe unexpected connection drops with some APs due to
non-acked mac80211 generated null data frames (keep-alive).
After debugging and capture, we noticed that null frames are
submitted at standard data bitrate and that the given APs are
in trouble with that.

After setting the null frame bitrate to control bitrate, all
null frames are acked as expected and connection is maintained.

Not sure if it's a requirement of the specification, but it seems
the right thing to do anyway, null frames are mostly used for control
purpose (power-saving, keep-alive...), and submitting them with
a slower/simpler bitrate/modulation is more robust.

Cc: stable@vger.kernel.org
Fixes: 512b191d9652 ("wcn36xx: Fix TX data path")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634560399-15290-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wcn36xx: Fix tx_status mechanism

commit a9e79b116cc4d0057e912be8f40b2c2e5bdc7c43 upstream.

This change fix the TX ack mechanism in various ways:

- For NO_ACK tagged packets, we don't need to wait for TX_ACK indication
and so are not subject to the single packet ack limitation. So we don't
have to stop the tx queue, and can call the tx status callback as soon
as DMA transfer has completed.

- Fix skb ownership/reference. Only start status indication timeout
once the DMA transfer has been completed. This avoids the skb to be
both referenced in the DMA tx ring and by the tx_ack_skb pointer,
preventing any use-after-free or double-free.

- This adds a sanity (paranoia?) check on the skb tx ack pointer.

- Resume TX queue if TX status tagged packet TX fails.

Cc: stable@vger.kernel.org
Fixes: fdf21cc37149 ("wcn36xx: Add TX ack support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634567281-28997-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wcn36xx: Fix HT40 capability for 2Ghz band

commit 960ae77f25631bbe4e3aafefe209b52e044baf31 upstream.

All wcn36xx controllers are supposed to support HT40 (and SGI40),
This doubles the maximum bitrate/throughput with compatible APs.

Tested with wcn3620 & wcn3680B.

Cc: stable@vger.kernel.org
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634737133-22336-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ifb: Depend on netfilter alternatively to tc

commit 046178e726c2977d686ba5e07105d5a6685c830e upstream.

IFB originally depended on NET_CLS_ACT for traffic redirection.
But since v4.5, that may be achieved with NFT_FWD_NETDEV as well.

Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v4.5+: bcfabee1afd9: netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

evm: mark evm_fixmode as __ro_after_init

commit 32ba540f3c2a7ef61ed5a577ce25069a3d714fc9 upstream.

The evm_fixmode is only configurable by command-line option and it is never
modified outside initcalls, so declaring it with __ro_after_init is better.

Signed-off-by: Austin Kim <austin.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8187: fix control-message timeouts

commit 2e9be536a213e838daed6ba42024dd68954ac061 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver")
Cc: stable@vger.kernel.org # 2.6.23
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211025120522.6045-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Mark Atheros QCA6174 to avoid bus reset

commit e3f4bd3462f6f796594ecc0dda7144ed2d1e5a26 upstream.

When passing the Atheros QCA6174 through to a virtual machine, the VM hangs
at the point where the ath10k driver loads.

Add a quirk to avoid bus resets on this device, which avoids the hang.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/08982e05-b6e8-5a8d-24ab-da1488ee50a8@web.de
Signed-off-by: Ingmar Klein <ingmar_klein@web.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix division by zero in send path

commit a006acb931317aad3a8dd41333ebb0453caf49b8 upstream.

Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 4db66499df91 ("ath10k: add initial USB support")
Cc: stable@vger.kernel.org # 4.14
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027080819.6675-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix control-message timeout

commit 5286132324230168d3fab6ffc16bfd7de85bdfb4 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 4db66499df91 ("ath10k: add initial USB support")
Cc: stable@vger.kernel.org # 4.14
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211025120522.6045-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath6kl: fix control-message timeout

commit a066d28a7e729f808a3e6eff22e70c003091544e upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 241b128b6b69 ("ath6kl: add back beginnings of USB support")
Cc: stable@vger.kernel.org # 3.4
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211025120522.6045-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath6kl: fix division by zero in send path

commit c1b9ca365deae667192be9fe24db244919971234 upstream.

Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 9cbee358687e ("ath6kl: add full USB support")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027080819.6675-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: fix division by zero in fw download path

commit 89f8765a11d8df49296d92c404067f9b5c58ee26 upstream.

Add the missing endpoint sanity checks to probe() to avoid division by
zero in mwifiex_write_data_sync() in case a malicious device has broken
descriptors (or when doing descriptor fuzz testing).

Only add checks for the firmware-download boot stage, which require both
command endpoints, for now. The driver looks like it will handle a
missing endpoint during normal operation without oopsing, albeit not
very gracefully as it will try to submit URBs to the default pipe and
fail.

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset")
Cc: stable@vger.kernel.org # 3.5
Cc: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027080819.6675-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell

commit 537bddd069c743759addf422d0b8f028ff0f8dbc upstream.

The computation of TOHM is off by one bit. This missed bit results in
too low a value for TOHM, which can cause errors in regular memory to
incorrectly report:

  EDAC MC0: 1 CE Error at MMIOH area, on addr 0x000000207fffa680 on any memory

Fixes: 50d1bb93672f ("sb_edac: add support for Haswell based systems")
Cc: stable@vger.kernel.org
Reported-by: Meeta Saggi <msaggi@purestorage.com>
Signed-off-by: Eric Badger <ebadger@purestorage.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20211010170127.848113-1-ebadger@purestorage.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property

commit a7fda04bc9b6ad9da8e19c9e6e3b1dab773d068a upstream.

The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".

Cc: <stable@vger.kernel.org>
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled

commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream.

The driver and its bindings, before commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.

IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.

This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled).  Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].

Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled.  After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.

Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.

Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus/lm25066) Add offset coefficients

commit ae59dc455a78fb73034dd1fbb337d7e59c27cbd8 upstream.

With the exception of the lm5066i, all the devices handled by this
driver had been missing their offset ('b') coefficients for direct
format readings.

Cc: stable@vger.kernel.org
Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056")
Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients")
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20210928092242.30036-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix race condition when computing ocontext SIDs

commit cbfcd13be5cb2a07868afe67520ed181956579a7 upstream.

Current code contains a lot of racy patterns when converting an
ocontext's context structure to an SID. This is being done in a "lazy"
fashion, such that the SID is looked up in the SID table only when it's
first needed and then cached in the "sid" field of the ocontext
structure. However, this is done without any locking or memory barriers
and is thus unsafe.

Between commits 24ed7fdae669 ("selinux: use separate table for initial
SID lookup") and 66f8e2f03c02 ("selinux: sidtab reverse lookup hash
table"), this race condition lead to an actual observable bug, because a
pointer to the shared sid field was passed directly to
sidtab_context_to_sid(), which was using this location to also store an
intermediate value, which could have been read by other threads and
interpreted as an SID. In practice this caused e.g. new mounts to get a
wrong (seemingly random) filesystem context, leading to strange denials.
This bug has been spotted in the wild at least twice, see [1] and [2].

Fix the race condition by making all the racy functions use a common
helper that ensures the ocontext::sid accesses are made safely using the
appropriate SMP constructs.

Note that security_netif_sid() was populating the sid field of both
contexts stored in the ocontext, but only the first one was actually
used. The SELinux wiki's documentation on the "netifcon" policy
statement [3] suggests that using only the first context is intentional.
I kept only the handling of the first context here, as there is really
no point in doing the SID lookup for the unused one.

I wasn't able to reproduce the bug mentioned above on any kernel that
includes commit 66f8e2f03c02, even though it has been reported that the
issue occurs with that commit, too, just less frequently. Thus, I wasn't
able to verify that this patch fixes the issue, but it makes sense to
avoid the race condition regardless.

[1] https://github.com/containers/container-selinux/issues/89
[2] https://lists.fedoraproject.org/archives/list/selinux@lists.fedoraproject.org/thread/6DMTAMHIOAOEMUAVTULJD45JZU7IBAFM/
[3] https://selinuxproject.org/page/NetworkStatements#netifcon

Cc: stable@vger.kernel.org
Cc: Xinjie Zheng <xinjie@google.com>
Reported-by: Sujithra Periasamy <sujithra@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: kprobes: Fix to pass correct trampoline address to the handler

commit a7fe2378454cf46cd5e2776d05e72bbe8f0a468c upstream.

The following commit:

   Commit e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")

Passed the wrong trampoline address to __kretprobe_trampoline_handler(): it
passes the descriptor address instead of function entry address.

Pass the right parameter.

Also use correct symbol dereference function to get the function address
from 'kretprobe_trampoline' - an IA64 special.

Link: https://lkml.kernel.org/r/163163042696.489837.12551102356265354730.stgit@devnote2
Fixes: e792ff804f49 ("ia64: kprobes: Use generic kretprobe trampoline handler")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: X86 ML <x86@kernel.org>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Unregister posted interrupt wakeup handler on hardware unsetup

commit ec5a4919fa7b7d8c7a2af1c7e799b1fe4be84343 upstream.

Unregister KVM's posted interrupt wakeup handler during unsetup so that a
spurious interrupt that arrives after kvm_intel.ko is unloaded doesn't
call into freed memory.

Fixes: bf9f6ac8d749 ("KVM: Update Posted-Interrupts Descriptor when vCPU is blocked")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009001107.3936588-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: call btrfs_check_rw_degradable only if there is a missing device

commit 5c78a5e7aa835c4f08a7c90fe02d19f95a776f29 upstream.

In open_ctree() in btrfs_check_rw_degradable() [1], we check each block
group individually if at least the minimum number of devices is available
for that profile. If all the devices are available, then we don't have to
check degradable.

[1]
open_ctree()
::
3559 if (!sb_rdonly(sb) && !btrfs_check_rw_degradable(fs_info, NULL)) {

Also before calling btrfs_check_rw_degradable() in open_ctee() at the
line number shown below [2] we call btrfs_read_chunk_tree() and down to
add_missing_dev() to record number of missing devices.

[2]
open_ctree()
::
3454         ret = btrfs_read_chunk_tree(fs_info);

btrfs_read_chunk_tree()
  read_one_chunk() / read_one_dev()
    add_missing_dev()

So, check if there is any missing device before btrfs_check_rw_degradable()
in open_ctree().

Also, with this the mount command could save ~16ms.[3] in the most
common case, that is no device is missing.

[3]
 1) * 16934.96 us | btrfs_check_rw_degradable [btrfs]();

CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix lost error handling when replaying directory deletes

commit 10adb1152d957a4d570ad630f93a88bb961616c1 upstream.

At replay_dir_deletes(), if find_dir_range() returns an error we break out
of the main while loop and then assign a value of 0 (success) to the 'ret'
variable, resulting in completely ignoring that an error happened. Fix
that by jumping to the 'out' label when find_dir_range() returns an error
(negative value).

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: clear MISSING device status bit in btrfs_close_one_device

commit 5d03dbebba2594d2e6fbf3b5dd9060c5a835de3b upstream.

Reported bug: https://github.com/kdave/btrfs-progs/issues/389

There's a problem with scrub reporting aborted status but returning
error code 0, on a filesystem with missing and readded device.

Roughly these steps:

- mkfs -d raid1 dev1 dev2
- fill with data
- unmount
- make dev1 disappear
- mount -o degraded
- copy more data
- make dev1 appear again

Running scrub afterwards reports that the command was aborted, but the
system log message says the exit code was 0.

It seems that the cause of the error is decrementing
fs_devices->missing_devices but not clearing device->dev_state.  Every
time we umount filesystem, it would call close_ctree, And it would
eventually involve btrfs_close_one_device to close the device, but it
only decrements fs_devices->missing_devices but does not clear the
device BTRFS_DEV_STATE_MISSING bit. Worse, this bug will cause Integer
Overflow, because every time umount, fs_devices->missing_devices will
decrease. If fs_devices->missing_devices value hit 0, it would overflow.

With added debugging:

   loop1: detected capacity change from 0 to 20971520
   BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 1 transid 21 /dev/loop1 scanned by systemd-udevd (2311)
   loop2: detected capacity change from 0 to 20971520
   BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 2 transid 17 /dev/loop2 scanned by systemd-udevd (2313)
   BTRFS info (device loop1): flagging fs with big metadata feature
   BTRFS info (device loop1): allowing degraded mounts
   BTRFS info (device loop1): using free space tree
   BTRFS info (device loop1): has skinny extents
   BTRFS info (device loop1):  before clear_missing.00000000f706684d /dev/loop1 0
   BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
   BTRFS info (device loop1):  before clear_missing.0000000000000000 /dev/loop2 1
   BTRFS info (device loop1): flagging fs with big metadata feature
   BTRFS info (device loop1): allowing degraded mounts
   BTRFS info (device loop1): using free space tree
   BTRFS info (device loop1): has skinny extents
   BTRFS info (device loop1):  before clear_missing.00000000f706684d /dev/loop1 0
   BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
   BTRFS info (device loop1):  before clear_missing.0000000000000000 /dev/loop2 0
   BTRFS info (device loop1): flagging fs with big metadata feature
   BTRFS info (device loop1): allowing degraded mounts
   BTRFS info (device loop1): using free space tree
   BTRFS info (device loop1): has skinny extents
   BTRFS info (device loop1):  before clear_missing.00000000f706684d /dev/loop1 18446744073709551615
   BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
   BTRFS info (device loop1):  before clear_missing.0000000000000000 /dev/loop2 18446744073709551615

If fs_devices->missing_devices is 0, next time it would be 18446744073709551615

After apply this patch, the fs_devices->missing_devices seems to be
right:

  $ truncate -s 10g test1
  $ truncate -s 10g test2
  $ losetup /dev/loop1 test1
  $ losetup /dev/loop2 test2
  $ mkfs.btrfs -draid1 -mraid1 /dev/loop1 /dev/loop2 -f
  $ losetup -d /dev/loop2
  $ mount -o degraded /dev/loop1 /mnt/1
  $ umount /mnt/1
  $ mount -o degraded /dev/loop1 /mnt/1
  $ umount /mnt/1
  $ mount -o degraded /dev/loop1 /mnt/1
  $ umount /mnt/1
  $ dmesg

   loop1: detected capacity change from 0 to 20971520
   loop2: detected capacity change from 0 to 20971520
   BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 1 transid 5 /dev/loop1 scanned by mkfs.btrfs (1863)
   BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 2 transid 5 /dev/loop2 scanned by mkfs.btrfs (1863)
   BTRFS info (device loop1): flagging fs with big metadata feature
   BTRFS info (device loop1): allowing degraded mounts
   BTRFS info (device loop1): disk space caching is enabled
   BTRFS info (device loop1): has skinny extents
   BTRFS info (device loop1):  before clear_missing.00000000975bd577 /dev/loop1 0
   BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
   BTRFS info (device loop1):  before clear_missing.0000000000000000 /dev/loop2 1
   BTRFS info (device loop1): checking UUID tree
   BTRFS info (device loop1): flagging fs with big metadata feature
   BTRFS info (device loop1): allowing degraded mounts
   BTRFS info (device loop1): disk space caching is enabled
   BTRFS info (device loop1): has skinny extents
   BTRFS info (device loop1):  before clear_missing.00000000975bd577 /dev/loop1 0
   BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
   BTRFS info (device loop1):  before clear_missing.0000000000000000 /dev/loop2 1
   BTRFS info (device loop1): flagging fs with big metadata feature
   BTRFS info (device loop1): allowing degraded mounts
   BTRFS info (device loop1): disk space caching is enabled
   BTRFS info (device loop1): has skinny extents
   BTRFS info (device loop1):  before clear_missing.00000000975bd577 /dev/loop1 0
   BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
   BTRFS info (device loop1):  before clear_missing.0000000000000000 /dev/loop2 1

CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Li Zhang <zhanglikernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: stop using dmapool

[ Upstream commit 42f2611cc1738b201701e717246e11e86bef4e1e ]

RDMA ULPs should only perform DMA through the ib_dma_* API instead of
using the hidden dma_device directly.  In addition using the dma coherent
API family that dmapool is a part of can be very ineffcient on plaforms
that are not DMA coherent.  Switch to use slab allocations and the
ib_dma_* APIs instead.

Link: https://lore.kernel.org/r/20201106181941.1878556-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Correct spelling mistake to TCPF_SYN_RECV

[ Upstream commit f3a3a0fe0b644582fa5d83dd94b398f99fc57914 ]

There should use TCPF_SYN_RECV instead of TCP_SYN_RECV.

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Fix smc_link->llc_testlink_time overflow

[ Upstream commit c4a146c7cf5e8ad76231523b174d161bf152c6e7 ]

The value of llc_testlink_time is set to the value stored in
net->ipv4.sysctl_tcp_keepalive_time when linkgroup init. The value of
sysctl_tcp_keepalive_time is already jiffies, so we don't need to
multiply by HZ, which would cause smc_link->llc_testlink_time overflow,
and test_link send flood.

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: bpf: relax prog rejection for mtu check through max_pkt_offset

[ Upstream commit 90a881fc352a953f1c8beb61977a2db0818157d4 ]

MTU change is refused whenever the value of new MTU is bigger than
the max packet bytes that fits in NFP Cluster Target Memory (CTM).
However, an eBPF program doesn't always need to access the whole
packet data.

The maximum direct packet access (DPA) offset has always been
caculated by verifier and stored in the max_pkt_offset field of prog
aux data.

Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vmxnet3: do not stop tx queues after netif_device_detach()

[ Upstream commit 9159f102402a64ac85e676b75cc1f9c62c5b4b73 ]

The netif_device_detach() conditionally stops all tx queues if the queues
are running. There is no need to call netif_tx_stop_all_queues() again.

Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: Add device 10ec:8162 to driver r8169

[ Upstream commit 72f898ca0ab85fde6facf78b14d9f67a4a7b32d1 ]

This patch makes the driver r8169 pick up device Realtek Semiconductor Co.
, Ltd. Device [10ec:8162].

Signed-off-by: Janghyub Seo <jhyub06@gmail.com>
Suggested-by: Rushab Shah <rushabshah32@gmail.com>
Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: fix header digest verification

[ Upstream commit 86aeda32b887cdaeb0f4b7bfc9971e36377181c7 ]

Pass the correct length to nvmet_tcp_verify_hdgst, which is the pdu
header length.  This fixes a wrong behaviour where header digest
verification passes although the digest is wrong.

Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: schedule queue restart after BLK_STS_ZONE_RESOURCE

[ Upstream commit 9586e67b911c95ba158fcc247b230e9c2d718623 ]

When dispatching a zone append write request to a SCSI zoned block device,
if the target zone of the request is already locked, the device driver will
return BLK_STS_ZONE_RESOURCE and the request will be pushed back to the
hctx dipatch queue. The queue will be marked as RESTART in
dd_finish_request() and restarted in __blk_mq_free_request(). However, this
restart applies to the hctx of the completed request. If the requeued
request is on a different hctx, dispatch will no be retried until another
request is submitted or the next periodic queue run triggers, leading to up
to 30 seconds latency for the requeued request.

Fix this problem by scheduling a queue restart similarly to the
BLK_STS_RESOURCE case or when we cannot get the budget.

Also, consolidate the checks into the "need_resource" variable to simplify
the condition.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/r/20211026165127.4151055-1-naohiro.aota@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for GPD Win3

[ Upstream commit 61b1d445f3bfe4c3ba4335ceeb7e8ba688fd31e2 ]

Fixes screen orientation for GPD Win 3 handheld gaming console.

Signed-off-by: Mario Risoldi <awxkrnl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026112737.9181-1-awxkrnl@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: Fix OMAP watchdog early handling

[ Upstream commit cd004d8299f1dc6cfa6a4eea8f94cb45eaedf070 ]

TI's implementation does not service the watchdog even if the kernel
command line parameter omap_wdt.early_enable is set to 1. This patch
fixes the issue.

Signed-off-by: Walter Stoll <walter.stoll@duagon.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/88a8fe5229cd68fa0f1fd22f5d66666c1b7057a0.camel@duagon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: multicast: calculate csum of looped-back and forwarded packets

[ Upstream commit 9122a70a6333705c0c35614ddc51c274ed1d3637 ]

During a testing of an user-space application which transmits UDP
multicast datagrams and utilizes multicast routing to send the UDP
datagrams out of defined network interfaces, I've found a multicast
router does not fill-in UDP checksum into locally produced, looped-back
and forwarded UDP datagrams, if an original output NIC the datagrams
are sent to has UDP TX checksum offload enabled.

The datagrams are sent malformed out of the NIC the datagrams have been
forwarded to.

It is because:

1. If TX checksum offload is enabled on the output NIC, UDP checksum
   is not calculated by kernel and is not filled into skb data.

2. dev_loopback_xmit(), which is called solely by
   ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY
   unconditionally.

3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except
   CHECKSUM_COMPLETE"), the ip_summed value is preserved during
   forwarding.

4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during
   a packet egress.

The minimum fix in dev_loopback_xmit():

1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the
   case when the original output NIC has TX checksum offload enabled.
   The effects are:

     a) If the forwarding destination interface supports TX checksum
        offloading, the NIC driver is responsible to fill-in the
        checksum.

     b) If the forwarding destination interface does NOT support TX
        checksum offloading, checksums are filled-in by kernel before
        skb is submitted to the NIC driver.

     c) For local delivery, checksum validation is skipped as in the
        case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary().

2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It
   means, for CHECKSUM_NONE, the behavior is unmodified and is there
   to skip a looped-back packet local delivery checksum validation.

Signed-off-by: Cyril Strejc <cyril.strejc@skoda.cz>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spl022: fix Microwire full duplex mode

[ Upstream commit d81d0e41ed5fe7229a2c9a29d13bad288c7cf2d2 ]

There are missing braces in the function that verify controller parameters,
then an error is always returned when the parameter to select Microwire
frames operation is used on devices allowing it.

Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Link: https://lore.kernel.org/r/20211022142104.1386379-1-thomas.perrot@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: fix a memory leak when releasing a queue

[ Upstream commit 926245c7d22271307606c88b1fbb2539a8550e94 ]

page_frag_free() won't completely release the memory
allocated for the commands, the cache page must be explicitly
freed by calling __page_frag_cache_drain().

This bug can be easily reproduced by repeatedly
executing the following command on the initiator:

$echo 1 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/reset_controller

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/netfront: stop tx queues during live migration

[ Upstream commit 042b2046d0f05cf8124c26ff65dbb6148a4404fb ]

The tx queues are not stopped during the live migration. As a result, the
ndo_start_xmit() may access netfront_info->queues which is freed by
talk_to_netback()->xennet_destroy_queues().

This patch is to netif_device_detach() at the beginning of xen-netfront
resuming, and netif_device_attach() at the end of resuming.

     CPU A                                CPU B

 talk_to_netback()
 -> if (info->queues)
        xennet_destroy_queues(info);
    to free netfront_info->queues

                                        xennet_start_xmit()
                                        to access netfront_info->queues

  -> err = xennet_create_queues(info, &num_queues);

The idea is borrowed from virtio-net.

Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mlxbf2.c: Add check for bgpio_init failure

[ Upstream commit c0eee6fbfa2b3377f1efed10dad539abeb7312aa ]

Add a check if bgpio_init fails.

Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Prevent increasing bpf_jit_limit above max

[ Upstream commit fadb7ff1a6c2c565af56b4aacdd086b067eed440 ]

Restrict bpf_jit_limit to the maximum supported by the arch's JIT.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT

[ Upstream commit 5d63ae908242f028bd10860cba98450d11c079b8 ]

Expose the maximum amount of useable memory from the arm64 JIT.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211014142554.53120-3-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

fcnal-test: kill hanging ping/nettest binaries on cleanup

[ Upstream commit 1f83b835a3eaa5ae4bd825fb07182698bfc243ba ]

On my box I see a bunch of ping/nettest processes hanging
around after fcntal-test.sh is done.

Clean those up before netns deletion.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211021140247.29691-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for Aya Neo 2021

[ Upstream commit def0c3697287f6e85d5ac68b21302966c95474f9 ]

Fixes screen orientation for the Aya Neo 2021 handheld gaming console.

Signed-off-by: Bryant Mairs <bryant@mai.rs>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019142433.4295-1-bryant@mai.rs
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: winbond: don't build on M68K

[ Upstream commit 162079f2dccd02cb4b6654defd32ca387dd6d4d4 ]

The Winbond MMC driver fails to build on ARCH=m68k so prevent
that build config. Silences these build errors:

../drivers/mmc/host/wbsd.c: In function 'wbsd_request_end':
../drivers/mmc/host/wbsd.c:212:28: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
  212 |                 dmaflags = claim_dma_lock();
../drivers/mmc/host/wbsd.c:215:17: error: implicit declaration of function 'release_dma_lock'; did you mean 'release_task'? [-Werror=implicit-function-declaration]
  215 |                 release_dma_lock(dmaflags);

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211017175949.23838-1-rdunlap@infradead.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: socfpga: add empty driver allowing consumers to probe

[ Upstream commit 3ad60b4b3570937f3278509fe6797a5093ce53f8 ]

The early reset driver doesn't ever probe, which causes consuming
devices to be unable to probe. Add an empty driver to set this device
as available, allowing consumers to probe.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Link: https://lore.kernel.org/r/20210920124141.1166544-4-pan@semihalf.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode

[ Upstream commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 ]

Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
wrong setting.

Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
the Ethernet working again on this board.

Signed-off-by: Bastien Roucariès <rouca@debian.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210916081721.237137-1-rouca@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

hyperv/vmbus: include linux/bitops.h

[ Upstream commit 8017c99680fa65e1e8d999df1583de476a187830 ]

On arm64 randconfig builds, hyperv sometimes fails with this
error:

In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]

Include the correct header first.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: Don't use netif_info before net_device setup

[ Upstream commit bf6abf345dfa77786aca554bc58c64bd428ecb1d ]

Use pci_info instead to avoid unnamed/uninitialized noise:

[197088.688729] sfc 0000:01:00.0: Solarflare NIC detected
[197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F
[197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed
[197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support

Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before
net_device is registered") from Heiner Kallweit.

Signed-off-by: Erik Ekman <erik@kryo.se>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: Export fibre-specific supported link modes

[ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ]

The 1/10GbaseT modes were set up for cards with SFP+ cages in
3497ed8c852a5 ("sfc: report supported link speeds on SFP connections").
10GbaseT was likely used since no 10G fibre mode existed.

The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144
("net: ethtool: add support for 1000BaseX and missing 10G link modes")
shortly thereafter.

The user guide available at https://support-nic.xilinx.com/wp/drivers
lists support for the following cable and transceiver types in section 2.9:
- QSFP28 100G Direct Attach Cables
- QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
- SFP28 25G Direct Attach Cables
- SFP28 25G SR Optical Transceivers
- QSFP+ 40G Direct Attach Cables
- QSFP+ 40G Active Optical Cables
- QSFP+ 40G SR4 Optical Transceivers
- QSFP+ to SFP+ Breakout Direct Attach Cables
- QSFP+ to SFP+ Breakout Active Optical Cables
- SFP+ 10G Direct Attach Cables
- SFP+ 10G SR Optical Transceivers
- SFP+ 10G LR Optical Transceivers
- SFP 1000BASE‐T Transceivers
- 1G Optical Transceivers
(From user guide issue 28. Issue 16 which also includes older cards like
SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)

Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
"Solarflare adapters do not support 10GBASE‐T transceiver modules."

Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
Before:

$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes:   1000baseT/Full
                        10000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes:  Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes:  Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
        Current message level: 0x000020f7 (8439)
                               drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes

After:

$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes:   1000baseT/Full
                        1000baseX/Full
                        10000baseCR/Full
                        10000baseSR/Full
                        10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes:  Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes:  Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Supports Wake-on: g
Wake-on: d
        Current message level: 0x000020f7 (8439)
                               drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes

Signed-off-by: Erik Ekman <erik@kryo.se>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cavium: Fix return values of the probe function

[ Upstream commit c69b2f46876825c726bd8a97c7fa852d8932bc32 ]

During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mISDN: Fix return values of the probe function

[ Upstream commit e211210098cb7490db2183d725f5c0f10463a704 ]

During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix unmap of already freed sgl

[ Upstream commit 4a8f71014b4d56c4fb287607e844c0a9f68f46d9 ]

The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:

NIP dma_direct_unmap_sg+0xdc/0x180
LR  dma_direct_unmap_sg+0xc8/0x180
Call Trace:
 ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
 dma_unmap_sg_attrs+0x54/0xf0
 qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
 qlt_free_cmd+0x124/0x1d0 [qla2xxx]
 tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
 target_put_sess_cmd+0x198/0x370 [target_core_mod]
 transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
 tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]

The sgl may be left unmapped in error cases of response sending.  For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.

This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.

Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Return -ENOMEM if kzalloc() fails

[ Upstream commit 06634d5b6e923ed0d4772aba8def5a618f44c7fe ]

The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.

Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cavium: Return negative value when pci_alloc_irq_vectors() fails

[ Upstream commit b2cddb44bddc1a9c5949a978bb454bba863264db ]

During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers

[ Upstream commit d94befbb5ae379f6dfd4fa6d460eacc09fa7b9c3 ]

In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and
rear speakers are silent, this patch fixes that by overriding the pin
layout and by initializing the amplifier which needs a GPIO pin to be
set to 1 then 0, similar to the existing HP Spectre x360 14 model.

In order to have volume control, both front and rear speakers were
forced to use the DAC1.

This patch also correctly map the mute LED but since there is no
microphone on/off switch exposed by the alsa subsystem it never turns
on by itself.

There are still known audio issues in this laptop: headset microphone
doesn't work, the button to mute/unmute microphone is not yet mapped,
the LED of the mute/unmute speakers doesn't seems to be exposed via
GPIO and never turns on.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953
Signed-off-by: Davide Baldo <davide@baldo.me>
Link: https://lore.kernel.org/r/20211015072121.5287-1-davide@baldo.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked()

[ Upstream commit c448b7aa3e66042fc0f849d9a0fb90d1af82e948 ]

'component' is allocated in snd_soc_register_component(), but component->list
is not initalized, this may cause snd_soc_del_component_unlocked() deref null
ptr in the error handing case.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__list_del_entry_valid+0x81/0xf0
Call Trace:
 snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core]
 snd_soc_add_component.cold+0x54/0x6c [snd_soc_core]
 snd_soc_register_component+0x70/0x90 [snd_soc_core]
 devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core]
 tas2552_probe+0x265/0x320 [snd_soc_tas2552]
 ? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552]
 i2c_device_probe+0xa31/0xbe0

Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211009065840.3196239-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/irq: Ensure PI wakeup handler is unregistered before module unload

commit 6ff53f6a438f72998f56e82e76694a1df9d1ea2c upstream.

Add a synchronize_rcu() after clearing the posted interrupt wakeup handler
to ensure all readers, i.e. in-flight IRQ handlers, see the new handler
before returning to the caller.  If the caller is an exiting module and
is unregistering its handler, failure to wait could result in the IRQ
handler jumping into an unloaded module.

The registration path doesn't require synchronization, as it's the
caller's responsibility to not generate interrupts it cares about until
after its handler is registered.

Fixes: f6b3c72c2366 ("x86/irq: Define a global vector for VT-d Posted-Interrupts")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009001107.3936588-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Fix migration safety with X86_BUG_NULL_SEL

commit 415de44076640483648d6c0f6d645a9ee61328ad upstream.

Currently, Linux probes for X86_BUG_NULL_SEL unconditionally which
makes it unsafe to migrate in a virtualised environment as the
properties across the migration pool might differ.

To be specific, the case which goes wrong is:

1. Zen1 (or earlier) and Zen2 (or later) in a migration pool
2. Linux boots on Zen2, probes and finds the absence of X86_BUG_NULL_SEL
3. Linux is then migrated to Zen1

Linux is now running on a X86_BUG_NULL_SEL-impacted CPU while believing
that the bug is fixed.

The only way to address the problem is to fully trust the "no longer
affected" CPUID bit when virtualised, because in the above case it would
be clear deliberately to indicate the fact "you might migrate to
somewhere which has this behaviour".

Zen3 adds the NullSelectorClearsBase CPUID bit to indicate that loading
a NULL segment selector zeroes the base and limit fields, as well as
just attributes. Zen2 also has this behaviour but doesn't have the NSCB
bit.

 [ bp: Minor touchups. ]

Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211021104744.24126-1-jane.malalane@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sme: Use #define USE_EARLY_PGTABLE_L5 in mem_encrypt_identity.c

commit e7d445ab26db833d6640d4c9a08bee176777cc82 upstream.

When runtime support for converting between 4-level and 5-level pagetables
was added to the kernel, the SME code that built pagetables was updated
to use the pagetable functions, e.g. p4d_offset(), etc., in order to
simplify the code. However, the use of the pagetable functions in early
boot code requires the use of the USE_EARLY_PGTABLE_L5 #define in order to
ensure that the proper definition of pgtable_l5_enabled() is used.

Without the #define, pgtable_l5_enabled() is #defined as
cpu_feature_enabled(X86_FEATURE_LA57). In early boot, the CPU features
have not yet been discovered and populated, so pgtable_l5_enabled() will
return false even when 5-level paging is enabled. This causes the SME code
to always build 4-level pagetables to perform the in-place encryption.
If 5-level paging is enabled, switching to the SME pagetables results in
a page-fault that kills the boot.

Adding the #define results in pgtable_l5_enabled() using the
__pgtable_l5_enabled variable set in early boot and the SME code building
pagetables for the proper paging level.

Fixes: aad983913d77 ("x86/mm/encrypt: Simplify sme_populate_pgd() and sme_populate_pgd_large()")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> # 4.18.x
Link: https://lkml.kernel.org/r/2cb8329655f5c753905812d951e212022a480475.1634318656.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix page stealing

commit 712a951025c0667ff00b25afc360f74e639dfabe upstream.

It is possible to trigger a crash by splicing anon pipe bufs to the fuse
device.

The reason for this is that anon_pipe_buf_release() will reuse buf->page if
the refcount is 1, but that page might have already been stolen and its
flags modified (e.g. PG_lru added).

This happens in the unlikely case of fuse_dev_splice_write() getting around
to calling pipe_buf_release() after a page has been stolen, added to the
page cache and removed from the page cache.

Fix by calling pipe_buf_release() right after the page was inserted into
the page cache.  In this case the page has an elevated refcount so any
release function will know that the page isn't reusable.

Reported-by: Frank Dinoff <fdinoff@google.com>
Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1yw@mail.gmail.com/
Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: refresh the ext4_ext_path struct after dropping i_data_sem.

commit 1811bc401aa58c7bdb0df3205aa6613b49d32127 upstream.

After we drop i_data sem, we need to reload the ext4_ext_path
structure since the extent tree can change once i_data_sem is
released.

This addresses the BUG:

[52117.465187] ------------[ cut here ]------------
[52117.465686] kernel BUG at fs/ext4/extents.c:1756!
...
[52117.478306] Call Trace:
[52117.478565]  ext4_ext_shift_extents+0x3ee/0x710
[52117.479020]  ext4_fallocate+0x139c/0x1b40
[52117.479405]  ? __do_sys_newfstat+0x6b/0x80
[52117.479805]  vfs_fallocate+0x151/0x4b0
[52117.480177]  ksys_fallocate+0x4a/0xa0
[52117.480533]  __x64_sys_fallocate+0x22/0x30
[52117.480930]  do_syscall_64+0x35/0x80
[52117.481277]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[52117.481769] RIP: 0033:0x7fa062f855ca

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-4-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: ensure enough credits in ext4_ext_shift_path_extents

commit 4268496e48dc681cfa53b92357314b5d7221e625 upstream.

Like ext4_ext_rm_leaf, we can ensure that there are enough credits
before every call that will consume credits.  As part of this fix we
fold the functionality of ext4_access_path() into
ext4_ext_shift_path_extents().  This change is needed as a preparation
for the next bugfix patch.

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-3-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix lazy initialization next schedule time computation in more granular unit

commit 39fec6889d15a658c3a3ebb06fd69d3584ddffd3 upstream.

Ext4 file system has default lazy inode table initialization setup once
it is mounted. However, it has issue on computing the next schedule time
that makes the timeout same amount in jiffies but different real time in
secs if with various HZ values. Therefore, fix by measuring the current
time in a more granular unit nanoseconds and make the next schedule time
independent of the HZ value.

Fixes: bfff68738f1c ("ext4: add support for lazy inode table initialization")
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210902164412.9994-2-shaoyi@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Unconditionally unlink slave instances, too

commit ffdd98277f0a1d15a67a74ae09bee713df4c0dbc upstream.

Like the previous fix (commit c0317c0e8709 "ALSA: timer: Fix
use-after-free problem"), we have to unlink slave timer instances
immediately at snd_timer_stop(), too.  Otherwise it may leave a stale
entry in the list if the slave instance is freed before actually
running.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211105091517.21733-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Fix use-after-free problem

commit c0317c0e87094f5b5782b6fdef5ae0a4b150496c upstream.

When the timer instance was add into ack_list but was not currently in
process, the user could stop it via snd_timer_stop1() without delete it
from the ack_list. Then the user could free the timer instance and when
it was actually processed UAF occurred.

This issue could be reproduced via testcase snd_timer01 in ltp - running
several instances of that testcase at the same time.

What I actually met was that the ack_list of the timer broken and the
kernel went into deadloop with irqoff. That could be detected by
hardlockup detector on board or when we run it on qemu, we could use gdb
to dump the ack_list when the console has no response.

To fix this issue, we delete the timer instance from ack_list and
active_list unconditionally in snd_timer_stop1().

Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211103033517.80531-1-wangwensheng4@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: synth: missing check for possible NULL after the call to kstrdup

commit d159037abbe3412285c271bdfb9cdf19e62678ff upstream.

If kcalloc() return NULL due to memory starvation, it is possible for
kstrdup() to return NULL in similar case. So add null check after the call
to kstrdup() is made.

[ minor coding-style fix by tiwai ]

Signed-off-by: Austin Kim <austin.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211109003742.GA5423@raspberrypi
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Free card instance properly at probe errors

commit 39173303c83859723dab32c2abfb97296d6af3bf upstream.

The recent change in hda-intel driver to allow repeated probes
surfaced a problem that has been hidden until; the probe process in
the work calls azx_free() at the error path, and this skips the card
free process that eventually releases codec instances.  As a result,
we get a kernel WARNING like:

  snd_hda_intel 0000:00:1f.3: Cannot probe codecs, giving up
  ------------[ cut here ]------------
  WARNING: CPU: 14 PID: 186 at sound/hda/hdac_bus.c:73
  ....

For fixing this, we need to call snd_card_free() instead of
azx_free().  Additionally, the device drvdata has to be cleared, as
the driver binding itself is still active.  Then the PM and other
driver callbacks will ignore the procedure.

Fixes: c0f1886de7e1 ("ALSA: hda: intel: Allow repeatedly probing on codec configuration errors")
Reported-and-tested-by: Scott Branden <scott.branden@broadcom.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/063e2397-7edb-5f48-7b0d-618b938d9dd8@broadcom.com
Link: https://lore.kernel.org/r/20211110194633.19098-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add registration quirk for JBL Quantum 400

commit 763d92ed5dece7d439fc28a88b2d2728d525ffd9 upstream.

Add another device ID for JBL Quantum 400. It requires the same quirk as
other JBL Quantum devices.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030174308.1011825-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk

commit 8f27b689066113a3e579d4df171c980c54368c4e upstream.

Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency
quirk as well.

The device is basically just the HX-Stomp with some more buttons on
the face.  I've done some recording with it after adding it, and it
seems to function properly with this fix.  The Midi features appear to
be working as well.

[ a coding style fix and patch reformat by tiwai ]

Signed-off-by: Jason Ormes <skryking@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: fix control and interrupt message timeouts

commit f4000b58b64344871d7b27c05e73932f137cfef6 upstream.

USB control and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Fixes: 705ececd1c60 ("Staging: add line6 usb driver")
Cc: stable@vger.kernel.org # 2.6.30
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025121142.6531-3-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: 6fire: fix control and bulk message timeouts

commit 9b371c6cc37f954360989eec41c2ddc5a6b83917 upstream.

USB control and bulk message timeouts are specified in milliseconds and
should specifically not vary with CONFIG_HZ.

Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Cc: stable@vger.kernel.org # 2.6.39
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025121142.6531-2-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ua101: fix division by zero at probe

commit 55f261b73a7e1cb254577c3536cef8f415de220a upstream.

Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in alloc_stream_buffers() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support")
Cc: stable@vger.kernel.org # 2.6.34
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211026095401.26522-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for HP EliteBook 840 G7 mute LED

commit c058493df7edcef8f48c1494d9a84218519f966b upstream.

The mute and micmute LEDs don't work on HP EliteBook 840 G7. The same
quirk for other HP laptops can let LEDs work, so apply it.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211110144033.118451-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for ASUS UX550VE

commit 4fad4fb9871b43389e4f4bead18ec693064697bb upstream.

ASUS UX550VE (SSID 1043:1970) requires a similar workaround for
managing the routing of the 4 speakers like some other ASUS models.
Add a corresponding quirk entry for fixing it.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212641
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211107083339.18013-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add a quirk for Acer Spin SP513-54N

commit 2a5bb694488bb6593066d46881bfd9d07edd1628 upstream.

Another model requires ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211104155726.2090997-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Headset fixup for Clevo NH77HJQ

commit 1278cc5ac2f96bab50dd55c8c05e0a6a77ce323e upstream.

On Clevo NH77HJ, NH77HP, and their 15" variants, there is a headset
microphone input attached to 0x19 that does not have a jack detect. In
order to get it working, the pin configuration needs to be set
correctly, and a new ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE fixup is
applied. This is similar to the existing System76 quirk for ALC293, but
for ALC256.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211102172104.10610-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo PC70HS

commit dbfe83507cf4ea66ce4efee2ac14c5ad420e31d3 upstream.

Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from
the internal speakers.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211101162134.5336-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add a quirk for HP OMEN 15 mute LED

commit 375f8426ed994addd2be4d76febc946a6fdd8280 upstream.

HP OMEN 15 laptop requires the quirk to fiddle with COEF 0x0b bit 2
for toggling the mute LED.  It's already implemented for other HP
laptops, and we just need to add a proper fixup entry.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214735
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211028070911.18891-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix mic mute LED for the HP Spectre x360 14

commit 5fc462c3aaad601d5089fd5588a5799896a6937d upstream.

On the 'HP Spectre x360 Convertible 14-ea0xx' the microphone mute led is
controlled by GPIO 0x04. The speaker mute LED does not seem to be
exposed by GPIO and is there not set.

[ a slight coding-style fix by tiwai ]

Fixes: c3bb2b521944 ("ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup")
Signed-off-by: Johnathon Clark <john.clark@cantab.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211020131253.35894-1-john.clark@cantab.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-ioctl: Fix check_ext_ctrls

commit 861f92cb9160b14beef0ada047384c2340701ee2 upstream.

Drivers that do not use the ctrl-framework use this function instead.

Fix the following issues:

- Do not check for multiple classes when getting the DEF_VAL.
- Return -EINVAL for request_api calls
- Default value cannot be changed, return EINVAL as soon as possible.
- Return the right error_idx
[If an error is found when validating the list of controls passed with
VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to
indicate to userspace that no actual hardware was touched.
It would have been much nicer of course if error_idx could point to the
control index that failed the validation, but sadly that's not how the
API was designed.]

Fixes v4l2-compliance:
Control ioctls (Input 0):
        warn: v4l2-test-controls.cpp(834): error_idx should be equal to count
        warn: v4l2-test-controls.cpp(855): error_idx should be equal to count
fail: v4l2-test-controls.cpp(813): doioctl(node, VIDIOC_G_EXT_CTRLS, &ctrls)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Buffer ioctls (Input 0):
fail: v4l2-test-buffers.cpp(1994): ret != EINVAL && ret != EBADR && ret != ENOTTY
test Requests: FAIL

Cc: stable@vger.kernel.org
Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ir-kbd-i2c: improve responsiveness of hauppauge zilog receivers

commit c73ba202a851c0b611ef2c25e568fadeff5e667f upstream.

The IR receiver has two issues:

 - Sometimes there is no response to a button press
 - Sometimes a button press is repeated when it should not have been

Hanging the polling interval fixes this behaviour.

Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=994050
Cc: stable@vger.kernel.org
Suggested-by: Joaquín Alberto Calderón Pozo <kini_calderon@hotmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rkvdec: Support dynamic resolution changes

commit 0887e9e152efbd3601d6c907e90033d25067277d upstream.

The mem-to-mem stateless decoder API specifies support for dynamic
resolution changes. In particular, the decoder should accept format
changes on the OUTPUT queue even when buffers have been allocated,
as long as it is not streaming.

Relax restrictions for S_FMT as described in the previous paragraph,
and as long as the codec format remains the same. This aligns it with
the Hantro and Cedrus decoders. This change was mostly based on commit
ae02d49493b5 ("media: hantro: Fix s_fmt for dynamic resolution changes").

Since rkvdec_s_fmt() is now just a wrapper around the output/capture
variants without any additional shared functionality, drop the wrapper
and call the respective functions directly.

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ite-cir: IR receiver stop working after receive overflow

commit fdc881783099c6343921ff017450831c8766d12a upstream.

On an Intel NUC6iSYK, no IR is reported after a receive overflow.

When a receiver overflow occurs, this condition is only cleared by
reading the fifo. Make sure we read anything in the fifo.

Fixes: 28c7afb07ccf ("media: ite-cir: check for receive overflow")
Suggested-by: Bryan Pass <bryan.pass@gmail.com>
Tested-by: Bryan Pass <bryan.pass@gmail.com>
Cc: stable@vger.kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rkvdec: Do not override sizeimage for output format

commit 298d8e8f7bcf023aceb60232d59b983255fec0df upstream.

The rkvdec H.264 decoder currently overrides sizeimage for the output
format. This causes issues when userspace requires and requests a larger
buffer, but ends up with one of insufficient size.

Instead, only provide a default size if none was requested. This fixes
the video_decode_accelerator_tests from Chromium failing on the first
frame due to insufficient buffer space. It also aligns the behavior
of the rkvdec driver with the Hantro and Cedrus drivers.

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: s5p-sss - Add error handling in s5p_aes_probe()

commit a472cc0dde3eb057db71c80f102556eeced03805 upstream.

The function s5p_aes_probe() does not perform sufficient error
checking after executing platform_get_resource(), thus fix it.

Fixes: c2afad6c6105 ("crypto: s5p-sss - Add HASH support for Exynos")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware/psci: fix application of sizeof to pointer

commit 2ac5fb35cd520ab1851c9a4816c523b65276052f upstream.

sizeof when applied to a pointer typed expression gives the size of
the pointer.

./drivers/firmware/psci/psci_checker.c:158:41-47: ERROR application of sizeof to pointer

This issue was detected with the help of Coccinelle.

Fixes: 7401056de5f8 ("drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests")
Cc: stable@vger.kernel.org
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Check for integer overflow in tpm2_map_response_body()

commit a0bcce2b2a169e10eb265c8f0ebdd5ae4c875670 upstream.

The "4 * be32_to_cpu(data->count)" multiplication can potentially
overflow which would lead to memory corruption.  Add a check for that.

Cc: stable@vger.kernel.org
Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>