platform/kernel/linux-rpi.git
8 years agoperf dwarf: Guard !x86_64 definitions under #ifdef else clause
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 15:04:29 +0000 (12:04 -0300)]
perf dwarf: Guard !x86_64 definitions under #ifdef else clause

To fix the build on Fedora Rawhide (gcc 6.0.0 20160311 (Red Hat 6.0.0-0.17):

    CC       /tmp/build/perf/arch/x86/util/dwarf-regs.o
  arch/x86/util/dwarf-regs.c:66:36: error: 'x86_32_regoffset_table' defined but not used [-Werror=unused-const-variable=]
   static const struct pt_regs_offset x86_32_regoffset_table[] = {
                                      ^~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fghuksc1u8ln82bof4lwcj0o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
8 years agoperf tools: Use readdir() instead of deprecated readdir_r()
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:53:02 +0000 (11:53 -0300)]
perf tools: Use readdir() instead of deprecated readdir_r()

The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case when parsing tracepoint event definitions, to
avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it
instead of readdir_r().

See: http://man7.org/linux/man-pages/man3/readdir.3.html

"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe.  In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."

Noticed while building on a Fedora Rawhide docker container.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wddn49r6bz6wq4ee3dxbl7lo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
8 years agoperf thread_map: Use readdir() instead of deprecated readdir_r()
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:31:24 +0000 (11:31 -0300)]
perf thread_map: Use readdir() instead of deprecated readdir_r()

The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case in thread_map, so, to avoid breaking the build
with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r().

See: http://man7.org/linux/man-pages/man3/readdir.3.html

"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe.  In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."

Noticed while building on a Fedora Rawhide docker container.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-del8h2a0f40z75j4r42l96l0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
8 years agoperf script: Use readdir() instead of deprecated readdir_r()
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:25:59 +0000 (11:25 -0300)]
perf script: Use readdir() instead of deprecated readdir_r()

The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case in 'perf script', so, to avoid breaking the build
with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r().

See: http://man7.org/linux/man-pages/man3/readdir.3.html

"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe.  In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."

Noticed while building on a Fedora Rawhide docker container.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mt3xz7n2hl49ni2vx7kuq74g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
8 years agoperf tools: Use readdir() instead of deprecated readdir_r()
Arnaldo Carvalho de Melo [Fri, 8 Apr 2016 14:32:15 +0000 (11:32 -0300)]
perf tools: Use readdir() instead of deprecated readdir_r()

The readdir() function is thread safe as long as just one thread uses a
DIR, which is the case when synthesizing events for pre-existing threads
by traversing /proc, so, to avoid breaking the build with glibc-2.23.90
(upcoming 2.24), use it instead of readdir_r().

See: http://man7.org/linux/man-pages/man3/readdir.3.html

"However, in modern implementations (including the glibc implementation),
concurrent calls to readdir() that specify different directory streams
are thread-safe.  In cases where multiple threads must read from the
same directory stream, using readdir() with external synchronization is
still preferable to the use of the deprecated readdir_r(3) function."

Noticed while building on a Fedora Rawhide docker container.

   CC       /tmp/build/perf/util/event.o
  util/event.c: In function '__event__synthesize_thread':
  util/event.c:466:2: error: 'readdir_r' is deprecated [-Werror=deprecated-declarations]
    while (!readdir_r(tasks, &dirent, &next) && next) {
    ^~~~~
  In file included from /usr/include/features.h:368:0,
                   from /usr/include/stdint.h:25,
                   from /usr/lib/gcc/x86_64-redhat-linux/6.0.0/include/stdint.h:9,
                   from /git/linux/tools/include/linux/types.h:6,
                   from util/event.c:1:
  /usr/include/dirent.h:189:12: note: declared here

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i1vj7nyjp2p750rirxgrfd3c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
8 years agoperf/core: Disable the event on a truncated AUX record
Alexander Shishkin [Tue, 10 May 2016 13:18:33 +0000 (16:18 +0300)]
perf/core: Disable the event on a truncated AUX record

When the PMU driver reports a truncated AUX record, it effectively means
that there is no more usable room in the event's AUX buffer (even though
there may still be some room, so that perf_aux_output_begin() doesn't take
action). At this point the consumer still has to be woken up and the event
has to be disabled, otherwise the event will just keep spinning between
perf_aux_output_begin() and perf_aux_output_end() until its context gets
unscheduled.

Again, for cpu-wide events this means never, so once in this condition,
they will be forever losing data.

Fix this by disabling the event and waking up the consumer in case of a
truncated AUX record.

Reported-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1462886313-13660-3-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoperf/x86/intel/pt: Generate PMI in the STOP region as well
Alexander Shishkin [Tue, 10 May 2016 13:18:32 +0000 (16:18 +0300)]
perf/x86/intel/pt: Generate PMI in the STOP region as well

Currently, the PT driver always sets the PMI bit one region (page) before
the STOP region so that we can wake up the consumer before we run out of
room in the buffer and have to disable the event. However, we also need
an interrupt in the last output region, so that we actually get to disable
the event (if no more room from new data is available at that point),
otherwise hardware just quietly refuses to start, but the event is
scheduled in and we end up losing trace data till the event gets removed.

For a cpu-wide event it is even worse since there may not be any
re-scheduling at all and no chance for the ring buffer code to notice
that its buffer is filled up and the event needs to be disabled (so that
the consumer can re-enable it when it finishes reading the data out). In
other words, all the trace data will be lost after the buffer gets filled
up.

This patch makes PT also generate a PMI when the last output region is
full.

Reported-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1462886313-13660-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoperf/x86: Fix undefined shift on 32-bit kernels
Andrey Ryabinin [Wed, 11 May 2016 13:51:51 +0000 (16:51 +0300)]
perf/x86: Fix undefined shift on 32-bit kernels

Jim reported:

UBSAN: Undefined behaviour in arch/x86/events/intel/core.c:3708:12
shift exponent 35 is too large for 32-bit type 'long unsigned int'

The use of 'unsigned long' type obviously is not correct here, make it
'unsigned long long' instead.

Reported-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Imre Palik <imrep@amazon.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 2c33645d366d ("perf/x86: Honor the architectural performance monitoring version")
Link: http://lkml.kernel.org/r/1462974711-10037-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoperf/x86/msr: Fix SMI overflow
Peter Zijlstra [Tue, 10 May 2016 12:16:54 +0000 (14:16 +0200)]
perf/x86/msr: Fix SMI overflow

We compute 'delta' and properly sign extend it and then ignore it and
recompute the raw value, loosing the sign extention.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Cc: linux-kernel@vger.kernel.org
Cc: luto@kernel.org
Cc: ray.huang@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoperf/x86/intel/uncore: Fix CHA registers configuration procedure for Knights Landing...
hchrzani [Mon, 9 May 2016 07:36:59 +0000 (09:36 +0200)]
perf/x86/intel/uncore: Fix CHA registers configuration procedure for Knights Landing platform

CHA events in Knights Landing platform require programming filter registers properly.
Remote node, local node and NonNearMemCachable bits should be set to 1 at all times.

Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Lawrence F Meadows <lawrence.f.meadows@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@suse.de
Cc: harish.chegondi@intel.com
Cc: hpa@zytor.com
Cc: izumi.taku@jp.fujitsu.com
Cc: kan.liang@intel.com
Cc: lukasz.anaczkowski@intel.com
Cc: vthakkar1994@gmail.com
Fixes: 77af0037de0a ('perf/x86/intel/uncore: Add Knights Landing uncore PMU support')
Link: http://lkml.kernel.org/r/1462779419-17115-2-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoperf diff: Fix duplicated output column
Namhyung Kim [Tue, 10 May 2016 14:26:24 +0000 (11:26 -0300)]
perf diff: Fix duplicated output column

The commit b97511c5bc94 ("perf tools: Add overhead/overhead_children
keys defaults via string") moved initialization of column headers but it
missed to check the sort__mode.  As 'perf diff' doesn't call
perf_hpp__init(), the setup_overhead() also should not be called.

Before:

  # Baseline    Delta  Children  Overhead  Shared Object        Symbol
  # ........  .......  ........  ........  ...................  .......................
  #
      28.48%  -28.47%    28.48%    28.48%  [kernel.vmlinux ]    [k] intel_idle
      11.51%  -11.47%    11.51%    11.51%  libxul.so            [.] 0x0000000001a360f7
       3.49%   -3.49%     3.49%     3.49%  [kernel.vmlinux]     [k] generic_exec_single
       2.91%   -2.89%     2.91%     2.91%  libdbus-1.so.3.8.11  [.] 0x000000000000cdc2
       2.86%   -2.85%     2.86%     2.86%  libxcb.so.1.1.0      [.] 0x000000000000c890
       2.44%   -2.39%     2.44%     2.44%  [kernel.vmlinux]     [k] perf_event_aux_ctx

After:

  # Baseline    Delta  Shared Object        Symbol
  # ........  .......  ...................  .......................
  #
      28.48%  -28.47%  [kernel.vmlinux]     [k] intel_idle
      11.51%  -11.47%  libxul.so            [.] 0x0000000001a360f7
       3.49%   -3.49%  [kernel.vmlinux]     [k] generic_exec_single
       2.91%   -2.89%  libdbus-1.so.3.8.11  [.] 0x000000000000cdc2
       2.86%   -2.85%  libxcb.so.1.1.0      [.] 0x000000000000c890
       2.44%   -2.39%  [kernel.vmlinux]     [k] perf_event_aux_ctx

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: <stable@vger.kernel.org> # 4.5+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b97511c5bc94 ("perf tools: Add overhead/overhead_children keys defaults via string")
Link: http://lkml.kernel.org/r/1462890384-12486-2-git-send-email-acme@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoMerge tag 'pci-v4.6-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Linus Torvalds [Tue, 10 May 2016 19:04:40 +0000 (12:04 -0700)]
Merge tag 'pci-v4.6-fixes-3' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "Since v4.5, we've WARNed during resume if a PCI device, including a
  Thunderbolt device, was added while we were suspended.  A change we
  merged for v4.6-rc1 turned that warning into a system hang.  These
  enumeration patches from Lukas Wunner fix this issue:

   - Fix BUG on device attach failure
   - Do not treat EPROBE_DEFER as device attach failure"

* tag 'pci-v4.6-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Do not treat EPROBE_DEFER as device attach failure
  PCI: Fix BUG on device attach failure

8 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 10 May 2016 18:41:05 +0000 (11:41 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Two topology corner case fixes, and a MAINTAINERS file update for
  mmiotrace maintenance"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Set x86_max_cores to 1 for CONFIG_SMP=n
  MAINTAINERS: Add mmiotrace entry
  x86/topology: Handle CPUID bogosity gracefully

8 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 10 May 2016 18:32:01 +0000 (11:32 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
 "A UP kernel cpufreq fix and a rt/dl scheduler corner case fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt, sched/dl: Don't push if task's scheduling class was changed
  sched/fair: Fix !CONFIG_SMP kernel cpufreq governor breakage

8 years agosched/rt, sched/dl: Don't push if task's scheduling class was changed
Xunlei Pang [Mon, 9 May 2016 04:11:31 +0000 (12:11 +0800)]
sched/rt, sched/dl: Don't push if task's scheduling class was changed

We got this warning:

    WARNING: CPU: 1 PID: 2468 at kernel/sched/core.c:1161 set_task_cpu+0x1af/0x1c0
    [...]
    Call Trace:

    dump_stack+0x63/0x87
    __warn+0xd1/0xf0
    warn_slowpath_null+0x1d/0x20
    set_task_cpu+0x1af/0x1c0
    push_dl_task.part.34+0xea/0x180
    push_dl_tasks+0x17/0x30
    __balance_callback+0x45/0x5c
    __sched_setscheduler+0x906/0xb90
    SyS_sched_setattr+0x150/0x190
    do_syscall_64+0x62/0x110
    entry_SYSCALL64_slow_path+0x25/0x25

This corresponds to:

    WARN_ON_ONCE(p->state == TASK_RUNNING &&
             p->sched_class == &fair_sched_class &&
             (p->on_rq && !task_on_rq_migrating(p)))

It happens because in find_lock_later_rq(), the task whose scheduling
class was changed to fair class is still pushed away as if it were
a deadline task ...

So, check in find_lock_later_rq() after double_lock_balance(), if the
scheduling class of the deadline task was changed, break and retry.

Apply the same logic to RT tasks.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Link: http://lkml.kernel.org/r/1462767091-1215-1-git-send-email-xlpang@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agox86/topology: Set x86_max_cores to 1 for CONFIG_SMP=n
Thomas Gleixner [Tue, 10 May 2016 07:20:33 +0000 (09:20 +0200)]
x86/topology: Set x86_max_cores to 1 for CONFIG_SMP=n

Josef reported that the uncore driver trips over with CONFIG_SMP=n because
x86_max_cores is 16 instead of 12.

The reason is, that for SMP=n the extended topology detection is a NOOP and
the cache leaf is used to determine the number of cores. That's wrong in two
aspects:

1) The cache leaf enumerates the maximum addressable number of cores in the
   package, which is obviously not correct

2) UP has no business with topology bits at all.

Make intel_num_cpu_cores() return 1 for CONFIG_SMP=n

Reported-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team <Kernel-team@fb.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/761b4a2a-0332-7954-f030-c6639f949612@fb.com
8 years agoMerge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdim...
Linus Torvalds [Tue, 10 May 2016 01:24:04 +0000 (18:24 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm build fix from Dan Williams:
 "A build fix for the usage of HPAGE_SIZE in the last libnvdimm pull
  request.

  I have taken note that the kbuild robot build success test does not
  include results for alpha_allmodconfig.  Thanks to Guenter for the
  report.  It's tagged for -stable since the original fix will land
  there and cause build problems"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, pfn: fix ARCH=alpha allmodconfig build failure

8 years agoperf/core: Change the default paranoia level to 2
Andy Lutomirski [Mon, 9 May 2016 22:48:51 +0000 (15:48 -0700)]
perf/core: Change the default paranoia level to 2

Allowing unprivileged kernel profiling lets any user dump follow kernel
control flow and dump kernel registers.  This most likely allows trivial
kASLR bypassing, and it may allow other mischief as well.  (Off the top
of my head, the PERF_SAMPLE_REGS_INTR output during /dev/urandom reads
could be quite interesting.)

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Tue, 10 May 2016 00:54:59 +0000 (17:54 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "2 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  zsmalloc: fix zs_can_compact() integer overflow
  Revert "proc/base: make prompt shell start from new line after executing "cat /proc/$pid/wchan""

8 years agozsmalloc: fix zs_can_compact() integer overflow
Sergey Senozhatsky [Mon, 9 May 2016 23:28:49 +0000 (16:28 -0700)]
zsmalloc: fix zs_can_compact() integer overflow

zs_can_compact() has two race conditions in its core calculation:

unsigned long obj_wasted = zs_stat_get(class, OBJ_ALLOCATED) -
zs_stat_get(class, OBJ_USED);

1) classes are not locked, so the numbers of allocated and used
   objects can change by the concurrent ops happening on other CPUs
2) shrinker invokes it from preemptible context

Depending on the circumstances, thus, OBJ_ALLOCATED can become
less than OBJ_USED, which can result in either very high or
negative `total_scan' value calculated later in do_shrink_slab().

do_shrink_slab() has some logic to prevent those cases:

 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-64
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62

However, due to the way `total_scan' is calculated, not every
shrinker->count_objects() overflow can be spotted and handled.
To demonstrate the latter, I added some debugging code to do_shrink_slab()
(x86_64) and the results were:

 vmscan: OVERFLOW: shrinker->count_objects() == -1 [18446744073709551615]
 vmscan: but total_scan > 0: 92679974445502
 vmscan: resulting total_scan: 92679974445502
[..]
 vmscan: OVERFLOW: shrinker->count_objects() == -1 [18446744073709551615]
 vmscan: but total_scan > 0: 22634041808232578
 vmscan: resulting total_scan: 22634041808232578

Even though shrinker->count_objects() has returned an overflowed value,
the resulting `total_scan' is positive, and, what is more worrisome, it
is insanely huge. This value is getting used later on in
shrinker->scan_objects() loop:

        while (total_scan >= batch_size ||
               total_scan >= freeable) {
                unsigned long ret;
                unsigned long nr_to_scan = min(batch_size, total_scan);

                shrinkctl->nr_to_scan = nr_to_scan;
                ret = shrinker->scan_objects(shrinker, shrinkctl);
                if (ret == SHRINK_STOP)
                        break;
                freed += ret;

                count_vm_events(SLABS_SCANNED, nr_to_scan);
                total_scan -= nr_to_scan;

                cond_resched();
        }

`total_scan >= batch_size' is true for a very-very long time and
'total_scan >= freeable' is also true for quite some time, because
`freeable < 0' and `total_scan' is large enough, for example,
22634041808232578. The only break condition, in the given scheme of
things, is shrinker->scan_objects() == SHRINK_STOP test, which is a
bit too weak to rely on, especially in heavy zsmalloc-usage scenarios.

To fix the issue, take a pool stat snapshot and use it instead of
racy zs_stat_get() calls.

Link: http://lkml.kernel.org/r/20160509140052.3389-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoRevert "proc/base: make prompt shell start from new line after executing "cat /proc...
Robin Humble [Mon, 9 May 2016 23:28:46 +0000 (16:28 -0700)]
Revert "proc/base: make prompt shell start from new line after executing "cat /proc/$pid/wchan""

This reverts the 4.6-rc1 commit 7e2bc81da333 ("proc/base: make prompt
shell start from new line after executing "cat /proc/$pid/wchan")
because it breaks /proc/$PID/whcan formatting in ps and top.

Revert also because the patch is inconsistent - it adds a newline at the
end of only the '0' wchan, and does not add a newline when
/proc/$PID/wchan contains a symbol name.

eg.
$ ps -eo pid,stat,wchan,comm
PID STAT WCHAN  COMMAND
...
1189 S    -      dbus-launch
1190 Ssl  0
dbus-daemon
1198 Sl   0
lightdm
1299 Ss   ep_pol systemd
1301 S    -      (sd-pam)
1304 Ss   wait   sh

Signed-off-by: Robin Humble <plaguedbypenguins@gmail.com>
Cc: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Mon, 9 May 2016 19:24:19 +0000 (12:24 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - bug in ahash SG list walking that may lead to crashes

   - resource leak in qat

   - missing RSA dependency that causes it to fail"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: rsa - select crypto mgr dependency
  crypto: hash - Fix page length clamping in hash walk
  crypto: qat - fix adf_ctl_drv.c:undefined reference to adf_init_pf_wq
  crypto: qat - fix invalid pf2vf_resp_wq logic

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Mon, 9 May 2016 19:11:37 +0000 (12:11 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Check klogctl failure correctly, from Colin Ian King.

 2) Prevent OOM when under memory pressure in flowcache, from Steffen
    Klassert.

 3) Fix info leak in llc and rtnetlink ifmap code, from Kangjie Lu.

 4) Memory barrier and multicast handling fixes in bnxt_en, from Michael
    Chan.

 5) Endianness bug in mlx5, from Daniel Jurgens.

 6) Fix disconnect handling in VSOCK, from Ian Campbell.

 7) Fix locking of netdev list walking in get_bridge_ifindices(), from
    Nikolay Aleksandrov.

 8) Bridge multicast MLD parser can look at wrong packet offsets, fix
    from Linus Lüssing.

 9) Fix chip hang in qede driver, from Sudarsana Reddy Kalluru.

10) Fix missing setting of encapsulation before inner handling completes
    in udp_offload code, from Jarno Rajahalme.

11) Missing rollbacks during LAG join and flood configuration failures
    in mlxsw driver, from Ido Schimmel.

12) Fix error code checks in netxen driver, from Dan Carpenter.

13) Fix key size in new macsec driver, from Sabrina Dubroca.

14) Fix mlx5/VXLAN dependencies, from Arnd Bergmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  net/mlx5e: make VXLAN support conditional
  Revert "net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue"
  macsec: key identifier is 128 bits, not 64
  Documentation/networking: more accurate LCO explanation
  macvtap: segmented packet is consumed
  tools: bpf_jit_disasm: check for klogctl failure
  qede: uninitialized variable in qede_start_xmit()
  netxen: netxen_rom_fast_read() doesn't return -1
  netxen: reversed condition in netxen_nic_set_link_parameters()
  netxen: fix error handling in netxen_get_flash_block()
  mlxsw: spectrum: Add missing rollback in flood configuration
  mlxsw: spectrum: Fix rollback order in LAG join failure
  udp_offload: Set encapsulation before inner completes.
  udp_tunnel: Remove redundant udp_tunnel_gro_complete().
  qede: prevent chip hang when increasing channels
  net: ipv6: tcp reset, icmp need to consider L3 domain
  bridge: fix igmp / mld query parsing
  net: bridge: fix old ioctl unlocked net device walk
  VSOCK: do not disconnect socket when peer has shutdown SEND only
  net/mlx4_en: Fix endianness bug in IPV6 csum calculation
  ...

8 years agocompiler-gcc: require gcc 4.8 for powerpc __builtin_bswap16()
Josh Poimboeuf [Fri, 6 May 2016 14:22:25 +0000 (09:22 -0500)]
compiler-gcc: require gcc 4.8 for powerpc __builtin_bswap16()

gcc support for __builtin_bswap16() was supposedly added for powerpc in
gcc 4.6, and was then later added for other architectures in gcc 4.8.

However, Stephen Rothwell reported that attempting to use it on powerpc
in gcc 4.6 fails with:

  lib/vsprintf.c:160:2: error: initializer element is not constant
  lib/vsprintf.c:160:2: error: (near initialization for 'decpair[0]')
  lib/vsprintf.c:160:2: error: initializer element is not constant
  lib/vsprintf.c:160:2: error: (near initialization for 'decpair[1]')
  ...

I'm not entirely sure what those errors mean, but I don't see them on
gcc 4.8.  So let's consider gcc 4.8 to be the official starting point
for __builtin_bswap16().

Arnd Bergmann adds:
 "I found the commit in gcc-4.8 that replaced the powerpc-specific
  implementation of __builtin_bswap16 with an architecture-independent
  one.  Apparently the powerpc version (gcc-4.6 and 4.7) just mapped to
  the lhbrx/sthbrx instructions, so it ended up not being a constant,
  though the intent of the patch was mainly to add support for the
  builtin to x86:

    https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52624

  has the patch that went into gcc-4.8 and more information."

Fixes: 7322dd755e7d ("byteswap: try to avoid __builtin_constant_p gcc bug")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge branch 'mlx5-build-fix'
David S. Miller [Mon, 9 May 2016 04:21:13 +0000 (00:21 -0400)]
Merge branch 'mlx5-build-fix'

Saeed Mahameed says:

====================
net/mlx5e: Kconfig fixes for VxLAN

Reposting to net the build errors fixes posted by Arnd last week.

Originally Arnd posted those fixes to net-next, while the issue
is also seen in net.  For net-next a different approach is required
for fixing the issue as VXLAN and Device Drivers are no longer
dependent, but there is no harm for those fixes to get into net-next.

Optionally, once net is merged into net-next we can
Revert "net/mlx5e: make VXLAN support conditional" as the
CONFIG_MLX5_CORE_EN_VXLAN will no longer be required.

Applied on top: 288928658583 ('mlxsw: spectrum: Add missing rollback in flood configuration')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: make VXLAN support conditional
Arnd Bergmann [Sun, 8 May 2016 11:55:25 +0000 (14:55 +0300)]
net/mlx5e: make VXLAN support conditional

VXLAN can be disabled at compile-time or it can be a loadable
module while mlx5 is built-in, which leads to a link error:

drivers/net/built-in.o: In function `mlx5e_create_netdev':
ntb_netdev.c:(.text+0x106de4): undefined reference to `vxlan_get_rx_port'

This avoids the link error and makes the vxlan code optional,
like the other ethernet drivers do as well.

Link: https://patchwork.ozlabs.org/patch/589296/
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoRevert "net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue"
Arnd Bergmann [Sun, 8 May 2016 11:55:24 +0000 (14:55 +0300)]
Revert "net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue"

This reverts commit 69976fb1045850a742deb9790ea49cbc6f497531.

We cannot select VXLAN when IPv4 support is disabled, that just gives
us additional build errors, including:

warning: (MLX5_CORE_EN) selects VXLAN which has unmet direct dependencies (NETDEVICES && NET_CORE && INET)
In file included from ../drivers/net/vxlan.c:36:0:
include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads':
include/net/udp_tunnel.h:112:9: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration]
  return iptunnel_handle_offloads(skb, type);
         ^~~~~~~~~~~~~~~~~~~~~~~~

I'm sending a proper fix for the original bug in a separate patch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomacsec: key identifier is 128 bits, not 64
Sabrina Dubroca [Sat, 7 May 2016 18:19:29 +0000 (20:19 +0200)]
macsec: key identifier is 128 bits, not 64

The MACsec standard mentions a key identifier for each key, but
doesn't specify anything about it, so I arbitrarily chose 64 bits.

IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the
key identifier to be 128 bits (96 bits "member identifier" + 32 bits
"key number").

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoDocumentation/networking: more accurate LCO explanation
Shmulik Ladkani [Fri, 6 May 2016 17:27:43 +0000 (20:27 +0300)]
Documentation/networking: more accurate LCO explanation

In few places the term "ones-complement sum" was used but the actual
meaning is "the complement of the ones-complement sum".

Also, avoid enclosing long statements with underscore, to ease
readability.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomacvtap: segmented packet is consumed
Eric Dumazet [Fri, 6 May 2016 12:58:21 +0000 (05:58 -0700)]
macvtap: segmented packet is consumed

If GSO packet is segmented and its segments are properly queued,
we call consume_skb() instead of kfree_skb() to be drop monitor
friendly.

Fixes: 3e4f8b7873709 ("macvtap: Perform GSO on forwarding path.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotools: bpf_jit_disasm: check for klogctl failure
Colin Ian King [Thu, 5 May 2016 22:39:33 +0000 (23:39 +0100)]
tools: bpf_jit_disasm: check for klogctl failure

klogctl can fail and return -ve len, so check for this and
return NULL to avoid passing a (size_t)-1 to malloc.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoqede: uninitialized variable in qede_start_xmit()
Dan Carpenter [Thu, 5 May 2016 13:21:30 +0000 (16:21 +0300)]
qede: uninitialized variable in qede_start_xmit()

"data_split" was never set to false.  It's just uninitialized.

Fixes: 2950219d87b0 ('qede: Add basic network device support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoLinux 4.6-rc7
Linus Torvalds [Sun, 8 May 2016 21:38:32 +0000 (14:38 -0700)]
Linux 4.6-rc7

8 years agoMAINTAINERS: Add mmiotrace entry
Ingo Molnar [Sun, 8 May 2016 08:27:33 +0000 (10:27 +0200)]
MAINTAINERS: Add mmiotrace entry

The Nouveau maintainers would like to follow and review mmiotrace
changes as well, so create a separate entry for that code. The high
level bits are living in the tracing code, the low level bits in the
x86 code.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Pekka Paalanen <ppaalanen@gmail.com>
Acked-by: karol herbst <karolherbst@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agonetxen: netxen_rom_fast_read() doesn't return -1
Dan Carpenter [Thu, 5 May 2016 13:20:20 +0000 (16:20 +0300)]
netxen: netxen_rom_fast_read() doesn't return -1

The error handling is broken here.  netxen_rom_fast_read() returns zero
on success and -EIO on error.  It never returns -1.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonetxen: reversed condition in netxen_nic_set_link_parameters()
Dan Carpenter [Thu, 5 May 2016 13:19:44 +0000 (16:19 +0300)]
netxen: reversed condition in netxen_nic_set_link_parameters()

My static checker complains that we are using "autoneg" without
initializing it.  The problem is the ->phy_read() condition is reversed
so we only set this on error instead of success.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonetxen: fix error handling in netxen_get_flash_block()
Dan Carpenter [Thu, 5 May 2016 13:18:46 +0000 (16:18 +0300)]
netxen: fix error handling in netxen_get_flash_block()

My static checker complained that "v" can be used unintialized if
netxen_rom_fast_read() returns -EIO.  That function never actually
returns -1.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 7 May 2016 17:53:32 +0000 (10:53 -0700)]
Merge tag 'char-misc-4.6-rc7' of git://git./linux/kernel/git/gregkh/char-misc

Pull misc driver fixes from Gfreg KH:
 "Here are three small fixes for some driver problems that were
  reported.  Full details in the shortlog below.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: mxs-ocotp: fix buffer overflow in read
  Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()
  misc: mic: Fix for double fetch security bug in VOP driver

8 years agoMerge tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 7 May 2016 17:50:48 +0000 (10:50 -0700)]
Merge tag 'staging-4.6-rc7' of git://git./linux/kernel/git/gregkh/staging

Pull IIO driver fixes from Grek KH:
 "It's really just IIO drivers here, some small fixes that resolve some
  'crash on boot' errors that have shown up in the -rc series, and other
  bugfixes that are required.

  All have been in linux-next with no reported problems"

* tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: mpu6050: Fix name/chip_id when using ACPI
  iio: imu: mpu6050: fix possible NULL dereferences
  iio:adc:at91-sama5d2: Repair crash on module removal
  iio: ak8975: fix maybe-uninitialized warning
  iio: ak8975: Fix NULL pointer exception on early interrupt

8 years agoMerge tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sat, 7 May 2016 17:47:03 +0000 (10:47 -0700)]
Merge tag 'usb-4.6-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some last-remaining fixes for USB drivers to resolve issues
  that have shown up in testing.  And two new device ids as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
  usb: musb: jz4740: fix error check of usb_get_phy()
  Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"
  usb: musb: gadget: nuke endpoint before setting its descriptor to NULL
  USB: serial: cp210x: add Straizona Focusers device ids
  USB: serial: cp210x: add ID for Link ECU

8 years agoMerge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Linus Torvalds [Sat, 7 May 2016 15:27:35 +0000 (08:27 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup

8 years agoMerge tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Sat, 7 May 2016 15:17:45 +0000 (08:17 -0700)]
Merge tag 'media/v4.6-5' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

  - deadlock fixes on driver probe at exynos4-is and s43-camif drivers

  - a build breakage if media controller is enabled and USB or PCI is
   built as module.

* tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: fix builds when USB or PCI is compiled as module
  [media] media: s3c-camif: fix deadlock on driver probe()
  [media] media: exynos4-is: fix deadlock on driver probe

8 years agoMerge branch 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Sat, 7 May 2016 15:13:42 +0000 (08:13 -0700)]
Merge branch 'for-4.6-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
 "An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

8 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Linus Torvalds [Sat, 7 May 2016 15:10:08 +0000 (08:10 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fix from Doug Ledford:
 "Fix for max sector calculation in iSER"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/iser: Fix max_sectors calculation

8 years agox86/topology: Handle CPUID bogosity gracefully
Thomas Gleixner [Fri, 6 May 2016 18:48:16 +0000 (20:48 +0200)]
x86/topology: Handle CPUID bogosity gracefully

Joseph reported that a XEN guest dies with a division by 0 in the package
topology setup code. This happens if cpu_info.x86_max_cores is zero.

Handle that case and emit a warning. This does not fix the underlying XEN bug,
but makes the code more robust.

Reported-and-tested-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1605062046270.3540@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
8 years agosched/fair: Fix !CONFIG_SMP kernel cpufreq governor breakage
Rafael J. Wysocki [Fri, 6 May 2016 12:58:43 +0000 (14:58 +0200)]
sched/fair: Fix !CONFIG_SMP kernel cpufreq governor breakage

The following commit:

  34e2c555f3e1 ("cpufreq: Add mechanism for registering utilization update callbacks")

overlooked the fact that update_load_avg(), where CFS invokes cpufreq
utilization update callbacks, becomes an empty stub on UP kernels.

In consequence, if !CONFIG_SMP, cpufreq governors are never invoked
from CFS and they do not have a chance to evaluate CPU performace
levels and update them often enough.

Needless to say, things don't work as expected then.

Fix the problem by making the !CONFIG_SMP stub of update_load_avg()
invoke cpufreq update callbacks too.

Reported-by: Steve Muckle <steve.muckle@linaro.org>
Tested-by: Steve Muckle <steve.muckle@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Steve Muckle <steve.muckle@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 34e2c555f3e1 (cpufreq: Add mechanism for registering utilization update callbacks)
Link: http://lkml.kernel.org/r/6282396.VVEdgVYxO3@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agomlxsw: spectrum: Add missing rollback in flood configuration
Ido Schimmel [Fri, 6 May 2016 20:18:40 +0000 (22:18 +0200)]
mlxsw: spectrum: Add missing rollback in flood configuration

When we fail to set the flooding configuration for the broadcast and
unregistered multicast traffic, we should revert the flooding
configuration of the unknown unicast traffic.

Fixes: 0293038e0c36 ("mlxsw: spectrum: Add support for flood control")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomlxsw: spectrum: Fix rollback order in LAG join failure
Ido Schimmel [Fri, 6 May 2016 20:18:39 +0000 (22:18 +0200)]
mlxsw: spectrum: Fix rollback order in LAG join failure

Make the leave procedure in the error path symmetric to the join
procedure and first remove the port from the collector before
potentially destroying the LAG.

Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoudp_offload: Set encapsulation before inner completes.
Jarno Rajahalme [Tue, 3 May 2016 23:10:21 +0000 (16:10 -0700)]
udp_offload: Set encapsulation before inner completes.

UDP tunnel segmentation code relies on the inner offsets being set for
an UDP tunnel GSO packet, but the inner *_complete() functions will
set the inner offsets only if 'encapsulation' is set before calling
them.  Currently, udp_gro_complete() sets 'encapsulation' only after
the inner *_complete() functions are done.  This causes the inner
offsets having invalid values after udp_gro_complete() returns, which
in turn will make it impossible to properly segment the packet in case
it needs to be forwarded, which would be visible to the user either as
invalid packets being sent or as packet loss.

This patch fixes this by setting skb's 'encapsulation' in
udp_gro_complete() before calling into the inner complete functions,
and by making each possible UDP tunnel gro_complete() callback set the
inner_mac_header to the beginning of the tunnel payload.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Reviewed-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoudp_tunnel: Remove redundant udp_tunnel_gro_complete().
Jarno Rajahalme [Tue, 3 May 2016 23:10:20 +0000 (16:10 -0700)]
udp_tunnel: Remove redundant udp_tunnel_gro_complete().

The setting of the UDP tunnel GSO type is already performed by
udp[46]_gro_complete().

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 6 May 2016 20:08:35 +0000 (13:08 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull writeback fix from Jens Axboe:
 "Just a single fix for domain aware writeback, fixing a regression that
  can cause balance_dirty_pages() to keep looping while not getting any
  work done"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: Fix performance regression in wb_over_bg_thresh()

8 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 6 May 2016 19:59:27 +0000 (12:59 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "This contains two fixes: a boot fix for older SGI/UV systems, and an
  APIC calibration fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init

8 years agoqede: prevent chip hang when increasing channels
Sudarsana Reddy Kalluru [Thu, 5 May 2016 04:35:16 +0000 (00:35 -0400)]
qede: prevent chip hang when increasing channels

qede requires qed to provide enough resources to accommodate 16 combined
channels, but that upper-bound isn't actually being enforced by it.
Instead, qed inform back to qede how many channels can be opened based on
available resources - but that calculation doesn't really take into account
the resources requested by qede; Instead it considers other FW/HW available
resources.

As a result, if a user would increase the number of channels to more than
16 [e.g., using ethtool] the chip would hang.

This change increments the resources requested by qede to 64 combined
channels instead of 16; This value is an upper bound on the possible
available channels [due to other FW/HW resources].

Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ipv6: tcp reset, icmp need to consider L3 domain
David Ahern [Thu, 5 May 2016 04:26:08 +0000 (21:26 -0700)]
net: ipv6: tcp reset, icmp need to consider L3 domain

Responses for packets to unused ports are getting lost with L3 domains.

IPv4 has ip_send_unicast_reply for sending TCP responses which accounts
for L3 domains; update the IPv6 counterpart tcp_v6_send_response.
For icmp the L3 master check needs to be moved up in icmp6_send
to properly respond to UDP packets to a port with no listener.

Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 6 May 2016 18:58:45 +0000 (11:58 -0700)]
Merge tag 'pm+acpi-4.6-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "Fixes for problems introduced or discovered recently (intel_pstate,
  sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
  generic device properties framework) and one fix for a hotplug-related
  deadlock in ACPICA that's been there forever, but is nasty enough.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver causing it
     to fail to restore the HWP (HW-managed P-states) configuration of
     the boot CPU after suspend-to-RAM (Rafael Wysocki).

   - Fix for two recent regressions in the intel_pstate driver, one that
     can trigger a divide by zero if the driver is accessed via sysfs
     before it manages to take the first sample and one causing it to
     fail to update a structure field used in a trace point, so the
     information coming from it is less useful (Rafael Wysocki).

   - Fix for a problem in the sti-cpufreq driver introduced during the
     4.5 cycle that causes it to break CPU PM in multi-platform kernels
     by registering cpufreq-dt (which subsequently doesn't work)
     unconditionally and preventing the driver that would actually work
     from registering (Sudeep Holla).

   - Stable-candidate fix for an ARM64 cpuidle issue causing idle state
     usage counters to be incorrectly updated for idle states that were
     not entered due to errors (James Morse).

   - Fix for a recently introduced issue in the OPP (Operating
     Performance Points) framework causing it to print bogus error
     messages for missing optional regulators (Viresh Kumar).

   - Fix for a recently introduced issue in the generic device
     properties framework that may cause it to attempt to dereferece and
     invalid pointer in some cases (Heikki Krogerus).

   - Fix for a deadlock in the ACPICA core that may be triggered by
     device (eg Thunderbolt) hotplug (Prarit Bhargava)"

* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Remove useless check
  ACPICA: Dispatcher: Update thread ID for recursive method calls
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
  device property: Avoid potential dereferences of invalid pointers

8 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 6 May 2016 18:53:27 +0000 (11:53 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Ingo Molnar:
 "This contains a single fix that fixes a nohz tick stopping bug when
  mixed-poliocy SCHED_FIFO and SCHED_RR tasks are present on a runqueue"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz/full, sched/rt: Fix missed tick-reenabling bug in sched_can_stop_tick()

8 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 6 May 2016 18:40:24 +0000 (11:40 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "This tree contains two fixes: new Intel CPU model numbers and an
  AMD/iommu uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs
  perf/x86: Add model numbers for Kabylake CPUs

8 years agoMerge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 6 May 2016 18:33:02 +0000 (11:33 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
 "This tree contains three fixes: a console spam fix, a file pattern fix
  and a sysfb_efi fix for a bug that triggered on older ThinkPads"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sysfb_efi: Fix valid BAR address range check
  x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT
  MAINTAINERS: Remove asterisk from EFI directory names

8 years agoMerge branch 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Fri, 6 May 2016 18:27:05 +0000 (11:27 -0700)]
Merge branch 'parisc-4.6-5' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
 "Patch from Dmitry V Levin to fix a kernel crash when a straced process
  calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls"

* 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

8 years agoMerge tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Linus Torvalds [Fri, 6 May 2016 18:14:38 +0000 (11:14 -0700)]
Merge tag 'arc-4.6-rc7-fixes' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
 "Late in the cycle, but this has fixes for couple of issues: a PAE40
  boot crash and Arnd spotting lack of barriers in BE io-accessors.

  The 3rd patch for enabling highmem in low physical mem ;-) honestly is
  more than a "fix" but its been in works for some time, seems to be
  stable in testing and enables 2 of our customers to go forward with
  4.6 kernel.

   - Fix for PTE truncation in PAE40 builds
   - Fix for big endian IO accessors lacking IO barrier
   - Allow HIGHMEM to work with low physical addresses"

* tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: support HIGHMEM even without PAE40
  ARC: Fix PAE40 boot failures due to PTE truncation
  ARC: Add missing io barriers to io{read,write}{16,32}be()

8 years agoMerge tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 6 May 2016 18:05:07 +0000 (11:05 -0700)]
Merge tag 'powerpc-4.6-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "Fix bad inline asm constraint in create_zero_mask() from Anton
  Blanchard"

* tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix bad inline asm constraint in create_zero_mask()

8 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 6 May 2016 17:59:53 +0000 (10:59 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Fixes for i915, amdgpu/radeon and imx.

  The IMX fix is for an autoloading regression found in Fedora.  The
  radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware
  lockup in some circumstances with a bad mode, and a double free bug I
  took a few hours chasing down the other morning.

  The i915 fixes are across the board, all stable material, and fixing
  some hangs and suspend/resume issues, along with a live status
  regressions"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
  drm/amdgpu: make sure vertical front porch is at least 1
  drm/radeon: make sure vertical front porch is at least 1
  drm/amdgpu: set metadata pointer to NULL after freeing.
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
  drm/i915: Fix system resume if PCI device remained enabled
  drm/i915: Avoid stalling on pending flips for legacy cursor updates

8 years agolibnvdimm, pfn: fix ARCH=alpha allmodconfig build failure
Dan Williams [Fri, 6 May 2016 17:20:10 +0000 (10:20 -0700)]
libnvdimm, pfn: fix ARCH=alpha allmodconfig build failure

I had relied on the kbuild robot for cross build coverage, however it
only builds alpha_defconfig.  Switch from HPAGE_SIZE to PMD_SIZE, which
is more widely defined.

Fixes: 658922e57b84 ("libnvdimm, pfn: fix memmap reservation sizing")
Cc: <stable@vger.kernel.org>
Reported-by: Guenter Roeck <guenter@roeck-us.net>
Tested-by: Guenter Roeck <guenter@roeck-us.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
8 years agobridge: fix igmp / mld query parsing
Linus Lüssing [Wed, 4 May 2016 15:25:02 +0000 (17:25 +0200)]
bridge: fix igmp / mld query parsing

With the newly introduced helper functions the skb pulling is hidden
in the checksumming function - and undone before returning to the
caller.

The IGMP and MLD query parsing functions in the bridge still
assumed that the skb is pointing to the beginning of the IGMP/MLD
message while it is now kept at the beginning of the IPv4/6 header.

If there is a querier somewhere else, then this either causes
the multicast snooping to stay disabled even though it could be
enabled. Or, if we have the querier enabled too, then this can
create unnecessary IGMP / MLD query messages on the link.

Fixing this by taking the offset between IP and IGMP/MLD header into
account, too.

Fixes: 9afd85c9e455 ("net: Export IGMP/MLD message validation code")
Reported-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoparisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls
Dmitry V. Levin [Wed, 27 Apr 2016 01:56:11 +0000 (04:56 +0300)]
parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

Do not load one entry beyond the end of the syscall table when the
syscall number of a traced process equals to __NR_Linux_syscalls.
Similar bug with regular processes was fixed by commit 3bb457af4fa8
("[PARISC] Fix bug when syscall nr is __NR_Linux_syscalls").

This bug was found by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
8 years agoMerge branches 'pm-opp-fixes', 'pm-cpufreq-fixes' and 'pm-cpuidle-fixes'
Rafael J. Wysocki [Fri, 6 May 2016 11:16:22 +0000 (13:16 +0200)]
Merge branches 'pm-opp-fixes', 'pm-cpufreq-fixes' and 'pm-cpuidle-fixes'

* pm-opp-fixes:
  PM / OPP: Remove useless check

* pm-cpufreq-fixes:
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform

* pm-cpuidle-fixes:
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value

8 years agoMerge branches 'acpica-fixes' and 'device-properties-fixes'
Rafael J. Wysocki [Fri, 6 May 2016 11:15:52 +0000 (13:15 +0200)]
Merge branches 'acpica-fixes' and 'device-properties-fixes'

* acpica-fixes:
  ACPICA: Dispatcher: Update thread ID for recursive method calls

* device-properties-fixes:
  device property: Avoid potential dereferences of invalid pointers

8 years agox86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
Chen Yu [Fri, 6 May 2016 03:33:39 +0000 (11:33 +0800)]
x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO

Currently we read the tsc radio: ratio = (MSR_PLATFORM_INFO >> 8) & 0x1f;

Thus we get bit 8-12 of MSR_PLATFORM_INFO, however according to the SDM
(35.5), the ratio bits are bit 8-15.

Ignoring the upper bits can result in an incorrect tsc ratio, which causes the
TSC calibration and the Local APIC timer frequency to be incorrect.

Fix this problem by masking 0xff instead.

[ tglx: Massaged changelog ]

Fixes: 7da7c1561366 "x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs"
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bin Gao <bin.gao@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1462505619-5516-1-git-send-email-yu.c.chen@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
8 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 6 May 2016 03:48:35 +0000 (20:48 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "14 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  byteswap: try to avoid __builtin_constant_p gcc bug
  lib/stackdepot: avoid to return 0 handle
  mm: fix kcompactd hang during memory offlining
  modpost: fix module autoloading for OF devices with generic compatible property
  proc: prevent accessing /proc/<PID>/environ until it's ready
  mm/zswap: provide unique zpool name
  mm: thp: kvm: fix memory corruption in KVM with THP enabled
  MAINTAINERS: fix Rajendra Nayak's address
  mm, cma: prevent nr_isolated_* counters from going negative
  mm: update min_free_kbytes from khugepaged after core initialization
  huge pagecache: mmap_sem is unlocked when truncation splits pmd
  rapidio/mport_cdev: fix uapi type definitions
  mm: memcontrol: let v2 cgroups follow changes in system swappiness
  mm: thp: correct split_huge_pages file permission

8 years agonet: bridge: fix old ioctl unlocked net device walk
Nikolay Aleksandrov [Wed, 4 May 2016 14:18:45 +0000 (16:18 +0200)]
net: bridge: fix old ioctl unlocked net device walk

get_bridge_ifindices() is used from the old "deviceless" bridge ioctl
calls which aren't called with rtnl held. The comment above says that it is
called with rtnl but that is not really the case.
Here's a sample output from a test ASSERT_RTNL() which I put in
get_bridge_ifindices and executed "brctl show":
[  957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30)
[  957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G        W  O
4.6.0-rc4+ #157
[  957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.8.1-20150318_183358- 04/01/2014
[  957.423009]  0000000000000000 ffff880058adfdf0 ffffffff8138dec5
0000000000000400
[  957.423009]  ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32
0000000000000001
[  957.423009]  00007ffec1a444b0 0000000000000400 ffff880053c19130
0000000000008940
[  957.423009] Call Trace:
[  957.423009]  [<ffffffff8138dec5>] dump_stack+0x85/0xc0
[  957.423009]  [<ffffffffa05ead32>]
br_ioctl_deviceless_stub+0x212/0x2e0 [bridge]
[  957.423009]  [<ffffffff81515beb>] sock_ioctl+0x22b/0x290
[  957.423009]  [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700
[  957.423009]  [<ffffffff8126c159>] SyS_ioctl+0x79/0x90
[  957.423009]  [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1

Since it only reads bridge ifindices, we can use rcu to safely walk the net
device list. Also remove the wrong rtnl comment above.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoVSOCK: do not disconnect socket when peer has shutdown SEND only
Ian Campbell [Wed, 4 May 2016 13:21:53 +0000 (14:21 +0100)]
VSOCK: do not disconnect socket when peer has shutdown SEND only

The peer may be expecting a reply having sent a request and then done a
shutdown(SHUT_WR), so tearing down the whole socket at this point seems
wrong and breaks for me with a client which does a SHUT_WR.

Looking at other socket family's stream_recvmsg callbacks doing a shutdown
here does not seem to be the norm and removing it does not seem to have
had any adverse effects that I can see.

I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact
on the vmci transport.

Signed-off-by: Ian Campbell <ian.campbell@docker.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Cc: Andy King <acking@vmware.com>
Cc: Dmitry Torokhov <dtor@vmware.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Adit Ranadive <aditr@vmware.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx4_en: Fix endianness bug in IPV6 csum calculation
Daniel Jurgens [Wed, 4 May 2016 12:00:33 +0000 (15:00 +0300)]
net/mlx4_en: Fix endianness bug in IPV6 csum calculation

Use htons instead of unconditionally byte swapping nexthdr.  On a little
endian systems shifting the byte is correct behavior, but it results in
incorrect csums on big endian architectures.

Fixes: f8c6455bb04b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Carol Soto <clsoto@us.ibm.com>
Tested-by: Carol Soto <clsoto@us.ibm.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomailmap: add John Paul Adrian Glaubitz
Linus Torvalds [Fri, 6 May 2016 03:07:14 +0000 (20:07 -0700)]
mailmap: add John Paul Adrian Glaubitz

Apparently patchwork ended up truncating the full name.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdim...
Linus Torvalds [Fri, 6 May 2016 01:10:01 +0000 (18:10 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:

 - a fix for the persistent memory 'struct page' driver.  The
   implementation overlooked the fact that pages are allocated in 2MB
   units leading to -ENOMEM when establishing some configurations.

   It's tagged for -stable as the problem was introduced with the
   initial implementation in 4.5.

 - The new "error status translation" routine, introduced with the 4.6
   updates to the nfit driver, missed a necessary path in
   acpi_nfit_ctl().

   The end result is that we are falsely assuming commands complete
   successfully when the embedded status says otherwise.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit: fix translation of command status results
  libnvdimm, pfn: fix memmap reservation sizing

8 years agobyteswap: try to avoid __builtin_constant_p gcc bug
Arnd Bergmann [Thu, 5 May 2016 23:22:39 +0000 (16:22 -0700)]
byteswap: try to avoid __builtin_constant_p gcc bug

This is another attempt to avoid a regression in wwn_to_u64() after that
started using get_unaligned_be64(), which in turn ran into a bug on
gcc-4.9 through 6.1.

The regression got introduced due to the combination of two separate
workarounds (commits e3bde9568d99: "include/linux/unaligned: force
inlining of byteswap operations" and ef3fb2422ffe: "scsi: fc: use
get/put_unaligned64 for wwn access") that each try to sidestep distinct
problems with gcc behavior (code growth and increased stack usage).

Unfortunately after both have been applied, a more serious gcc bug has
been uncovered, leading to incorrect object code that discards part of a
function and causes undefined behavior.

As part of this problem is how __builtin_constant_p gets evaluated on an
argument passed by reference into an inline function, this avoids the
use of __builtin_constant_p() for all architectures that set
CONFIG_ARCH_USE_BUILTIN_BSWAP.  Most architectures do not set
ARCH_SUPPORTS_OPTIMIZED_INLINING, which means they probably do not
suffer from the problem in the qla2xxx driver, but they might still run
into it elsewhere.

Both of the original workarounds were only merged in the 4.6 kernel, and
the bug that is fixed by this patch should only appear if both are
there, so we probably don't need to backport the fix.  On the other
hand, it works by simplifying the code path and should not have any
negative effects.

[arnd@arndb.de: fix older gcc warnings]
  (http://lkml.kernel.org/r/12243652.bxSxEgjgfk@wuerfel)
Link: https://lkml.org/lkml/headers/2016/4/12/1103
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70232
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70646
Fixes: e3bde9568d99 ("include/linux/unaligned: force inlining of byteswap operations")
Fixes: ef3fb2422ffe ("scsi: fc: use get/put_unaligned64 for wwn access")
Link: http://lkml.kernel.org/r/1780465.XdtPJpi8Tt@wuerfel
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> # on gcc-5.3
Tested-by: Quinn Tran <quinn.tran@qlogic.com>
Cc: Martin Jambor <mjambor@suse.cz>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Jan Hubicka <hubicka@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agolib/stackdepot: avoid to return 0 handle
Joonsoo Kim [Thu, 5 May 2016 23:22:35 +0000 (16:22 -0700)]
lib/stackdepot: avoid to return 0 handle

Recently, we allow to save the stacktrace whose hashed value is 0.  It
causes the problem that stackdepot could return 0 even if in success.
User of stackdepot cannot distinguish whether it is success or not so we
need to solve this problem.  In this patch, 1 bit are added to handle
and make valid handle none 0 by setting this bit.  After that, valid
handle will not be 0 and 0 handle will represent failure correctly.

Fixes: 33334e25769c ("lib/stackdepot.c: allow the stack trace hash to be zero")
Link: http://lkml.kernel.org/r/1462252403-1106-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: fix kcompactd hang during memory offlining
Vlastimil Babka [Thu, 5 May 2016 23:22:32 +0000 (16:22 -0700)]
mm: fix kcompactd hang during memory offlining

Assume memory47 is the last online block left in node1.  This will hang:

  # echo offline > /sys/devices/system/node/node1/memory47/state

After a couple of minutes, the following pops up in dmesg:

  INFO: task bash:957 blocked for more than 120 seconds.
         Not tainted 4.6.0-rc6+ #6
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  bash            D ffff8800b7adbaf8     0   957    951 0x00000000
  Call Trace:
    schedule+0x35/0x80
    schedule_timeout+0x1ac/0x270
    wait_for_completion+0xe1/0x120
    kthread_stop+0x4f/0x110
    kcompactd_stop+0x26/0x40
    __offline_pages.constprop.28+0x7e6/0x840
    offline_pages+0x11/0x20
    memory_block_action+0x73/0x1d0
    memory_subsys_offline+0x47/0x60
    device_offline+0x86/0xb0
    store_mem_state+0xda/0xf0
    dev_attr_store+0x18/0x30
    sysfs_kf_write+0x37/0x40
    kernfs_fop_write+0x11d/0x170
    __vfs_write+0x37/0x120
    vfs_write+0xa9/0x1a0
    SyS_write+0x55/0xc0
    entry_SYSCALL_64_fastpath+0x1a/0xa4

kcompactd is waiting for kcompactd_max_order > 0 when it's woken up to
actually exit.  Check kthread_should_stop() to break out of the wait.

Fixes: 698b1b306 ("mm, compaction: introduce kcompactd").
Reported-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomodpost: fix module autoloading for OF devices with generic compatible property
Philipp Zabel [Thu, 5 May 2016 23:22:29 +0000 (16:22 -0700)]
modpost: fix module autoloading for OF devices with generic compatible property

Since the wildcard at the end of OF module aliases is gone, autoloading
of modules that don't match a device's last (most generic) compatible
value fails.

For example the CODA960 VPU on i.MX6Q has the SoC specific compatible
"fsl,imx6q-vpu" and the generic compatible "cnm,coda960".  Since the
driver currently only works with knowledge about the SoC specific
integration, it doesn't list "cnm,cod960" in the module device table.

This results in the device compatible
"of:NvpuT<NULL>Cfsl,imx6q-vpuCcnm,coda960" not matching the module alias
"of:N*T*Cfsl,imx6q-vpu" anymore, whereas before commit 2f632369ab79
("modpost: don't add a trailing wildcard for OF module aliases") it
matched the module alias "of:N*T*Cfsl,imx6q-vpu*".

This patch adds two module aliases for each compatible, one without the
wildcard and one with "C*" appended.

  $ modinfo coda | grep imx6q
  alias:          of:N*T*Cfsl,imx6q-vpuC*
  alias:          of:N*T*Cfsl,imx6q-vpu

Fixes: 2f632369ab79 ("modpost: don't add a trailing wildcard for OF module aliases")
Link: http://lkml.kernel.org/r/1462203339-15340-1-git-send-email-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoproc: prevent accessing /proc/<PID>/environ until it's ready
Mathias Krause [Thu, 5 May 2016 23:22:26 +0000 (16:22 -0700)]
proc: prevent accessing /proc/<PID>/environ until it's ready

If /proc/<PID>/environ gets read before the envp[] array is fully set up
in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to
read more bytes than are actually written, as env_start will already be
set but env_end will still be zero, making the range calculation
underflow, allowing to read beyond the end of what has been written.

Fix this as it is done for /proc/<PID>/cmdline by testing env_end for
zero.  It is, apparently, intentionally set last in create_*_tables().

This bug was found by the PaX size_overflow plugin that detected the
arithmetic underflow of 'this_len = env_end - (env_start + src)' when
env_end is still zero.

The expected consequence is that userland trying to access
/proc/<PID>/environ of a not yet fully set up process may get
inconsistent data as we're in the middle of copying in the environment
variables.

Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Pax Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm/zswap: provide unique zpool name
Dan Streetman [Thu, 5 May 2016 23:22:23 +0000 (16:22 -0700)]
mm/zswap: provide unique zpool name

Instead of using "zswap" as the name for all zpools created, add an
atomic counter and use "zswap%x" with the counter number for each zpool
created, to provide a unique name for each new zpool.

As zsmalloc, one of the zpool implementations, requires/expects a unique
name for each pool created, zswap should provide a unique name.  The
zsmalloc pool creation does not fail if a new pool with a conflicting
name is created, unless CONFIG_ZSMALLOC_STAT is enabled; in that case,
zsmalloc pool creation fails with -ENOMEM.  Then zswap will be unable to
change its compressor parameter if its zpool is zsmalloc; it also will
be unable to change its zpool parameter back to zsmalloc, if it has any
existing old zpool using zsmalloc with page(s) in it.  Attempts to
change the parameters will result in failure to create the zpool.  This
changes zswap to provide a unique name for each zpool creation.

Fixes: f1c54846ee45 ("zswap: dynamic pool creation")
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <dan.streetman@canonical.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: thp: kvm: fix memory corruption in KVM with THP enabled
Andrea Arcangeli [Thu, 5 May 2016 23:22:20 +0000 (16:22 -0700)]
mm: thp: kvm: fix memory corruption in KVM with THP enabled

After the THP refcounting change, obtaining a compound pages from
get_user_pages() no longer allows us to assume the entire compound page
is immediately mappable from a secondary MMU.

A secondary MMU doesn't want to call get_user_pages() more than once for
each compound page, in order to know if it can map the whole compound
page.  So a secondary MMU needs to know from a single get_user_pages()
invocation when it can map immediately the entire compound page to avoid
a flood of unnecessary secondary MMU faults and spurious
atomic_inc()/atomic_dec() (pages don't have to be pinned by MMU notifier
users).

Ideally instead of the page->_mapcount < 1 check, get_user_pages()
should return the granularity of the "page" mapping in the "mm" passed
to get_user_pages().  However it's non trivial change to pass the "pmd"
status belonging to the "mm" walked by get_user_pages up the stack (up
to the caller of get_user_pages).  So the fix just checks if there is
not a single pte mapping on the page returned by get_user_pages, and in
turn if the caller can assume that the whole compound page is mapped in
the current "mm" (in a pmd_trans_huge()).  In such case the entire
compound page is safe to map into the secondary MMU without additional
get_user_pages() calls on the surrounding tail/head pages.  In addition
of being faster, not having to run other get_user_pages() calls also
reduces the memory footprint of the secondary MMU fault in case the pmd
split happened as result of memory pressure.

Without this fix after a MADV_DONTNEED (like invoked by QEMU during
postcopy live migration or balloning) or after generic swapping (with a
failure in split_huge_page() that would only result in pmd splitting and
not a physical page split), KVM would map the whole compound page into
the shadow pagetables, despite regular faults or userfaults (like
UFFDIO_COPY) may map regular pages into the primary MMU as result of the
pte faults, leading to the guest mode and userland mode going out of
sync and not working on the same memory at all times.

Any other secondary MMU notifier manager (KVM is just one of the many
MMU notifier users) will need the same information if it doesn't want to
run a flood of get_user_pages_fast and it can support multiple
granularity in the secondary MMU mappings, so I think it is justified to
be exposed not just to KVM.

The other option would be to move transparent_hugepage_adjust to
mm/huge_memory.c but that currently has all kind of KVM data structures
in it, so it's definitely not a cut-and-paste work, so I couldn't do a
fix as cleaner as this one for 4.6.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: "Li, Liang Z" <liang.z.li@intel.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMAINTAINERS: fix Rajendra Nayak's address
Eric Engestrom [Thu, 5 May 2016 23:22:17 +0000 (16:22 -0700)]
MAINTAINERS: fix Rajendra Nayak's address

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Afzal Mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm, cma: prevent nr_isolated_* counters from going negative
Hugh Dickins [Thu, 5 May 2016 23:22:15 +0000 (16:22 -0700)]
mm, cma: prevent nr_isolated_* counters from going negative

/proc/sys/vm/stat_refresh warns nr_isolated_anon and nr_isolated_file go
increasingly negative under compaction: which would add delay when
should be none, or no delay when should delay.  The bug in compaction
was due to a recent mmotm patch, but much older instance of the bug was
also noticed in isolate_migratepages_range() which is used for CMA and
gigantic hugepage allocations.

The bug is caused by putback_movable_pages() in an error path
decrementing the isolated counters without them being previously
incremented by acct_isolated().  Fix isolate_migratepages_range() by
removing the error-path putback, thus reaching acct_isolated() with
migratepages still isolated, and leaving putback to caller like most
other places do.

Fixes: edc2ca612496 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()")
[vbabka@suse.cz: expanded the changelog]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: update min_free_kbytes from khugepaged after core initialization
Jason Baron [Thu, 5 May 2016 23:22:12 +0000 (16:22 -0700)]
mm: update min_free_kbytes from khugepaged after core initialization

Khugepaged attempts to raise min_free_kbytes if its set too low.
However, on boot khugepaged sets min_free_kbytes first from
subsys_initcall(), and then the mm 'core' over-rides min_free_kbytes
after from init_per_zone_wmark_min(), via a module_init() call.

Khugepaged used to use a late_initcall() to set min_free_kbytes (such
that it occurred after the core initialization), however this was
removed when the initialization of min_free_kbytes was integrated into
the starting of the khugepaged thread.

The fix here is simply to invoke the core initialization using a
core_initcall() instead of module_init(), such that the previous
initialization ordering is restored.  I didn't restore the
late_initcall() since start_stop_khugepaged() already sets
min_free_kbytes via set_recommended_min_free_kbytes().

This was noticed when we had a number of page allocation failures when
moving a workload to a kernel with this new initialization ordering.  On
an 8GB system this restores min_free_kbytes back to 67584 from 11365
when CONFIG_TRANSPARENT_HUGEPAGE=y is set and either
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y or
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y.

Fixes: 79553da293d3 ("thp: cleanup khugepaged startup")
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agohuge pagecache: mmap_sem is unlocked when truncation splits pmd
Hugh Dickins [Thu, 5 May 2016 23:22:09 +0000 (16:22 -0700)]
huge pagecache: mmap_sem is unlocked when truncation splits pmd

zap_pmd_range()'s CONFIG_DEBUG_VM !rwsem_is_locked(&mmap_sem) BUG() will
be invalid with huge pagecache, in whatever way it is implemented:
truncation of a hugely-mapped file to an unhugely-aligned size would
easily hit it.

(Although anon THP could in principle apply khugepaged to private file
mappings, which are not excluded by the MADV_HUGEPAGE restrictions, in
practice there's a vm_ops check which excludes them, so it never hits
this BUG() - there's no interface to "truncate" an anonymous mapping.)

We could complicate the test, to check i_mmap_rwsem also when there's a
vm_file; but my inclination was to make zap_pmd_range() more readable by
simply deleting this check.  A search has shown no report of the issue
in the years since commit e0897d75f0b2 ("mm, thp: print useful
information when mmap_sem is unlocked in zap_pmd_range") expanded it
from VM_BUG_ON() - though I cannot point to what commit I would say then
fixed the issue.

But there are a couple of other patches now floating around, neither yet
in the tree: let's agree to retain the check as a VM_BUG_ON_VMA(), as
Matthew Wilcox has done; but subject to a vma_is_anonymous() check, as
Kirill Shutemov has done.  And let's get this in, without waiting for
any particular huge pagecache implementation to reach the tree.

Matthew said "We can reproduce this BUG() in the current Linus tree with
DAX PMDs".

Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Matthew Wilcox <willy@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agorapidio/mport_cdev: fix uapi type definitions
Alexandre Bounine [Thu, 5 May 2016 23:22:06 +0000 (16:22 -0700)]
rapidio/mport_cdev: fix uapi type definitions

Fix problems in uapi definitions reported by Gabriel Laskar: (see
https://lkml.org/lkml/2016/4/5/205 for details)

 - move public header file rio_mport_cdev.h to include/uapi/linux directory
 - change types in data structures passed as IOCTL parameters
 - improve parameter checking in some IOCTL service routines

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Gabriel Laskar <gabriel@lse.epita.fr>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Gabriel Laskar <gabriel@lse.epita.fr>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: memcontrol: let v2 cgroups follow changes in system swappiness
Johannes Weiner [Thu, 5 May 2016 23:22:03 +0000 (16:22 -0700)]
mm: memcontrol: let v2 cgroups follow changes in system swappiness

Cgroup2 currently doesn't have a per-cgroup swappiness setting.  We
might want to add one later - that's a different discussion - but until
we do, the cgroups should always follow the system setting.  Otherwise
it will be unchangeably set to whatever the ancestor inherited from the
system setting at the time of cgroup creation.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.5]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: thp: correct split_huge_pages file permission
Yang Shi [Thu, 5 May 2016 23:22:00 +0000 (16:22 -0700)]
mm: thp: correct split_huge_pages file permission

split_huge_pages doesn't support get method at all, so the read
permission sounds confusing, change the permission to write only.

And, add "\n" to the output of set method to make it more readable.

Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agoMerge tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd...
Linus Torvalds [Thu, 5 May 2016 22:40:38 +0000 (15:40 -0700)]
Merge tag 'asm-generic-4.6' of git://git./linux/kernel/git/arnd/asm-generic

Pull asm-generic syscall fix from Arnd Bergmann:
 "My last pull request for asm-generic had just one patch that added two
  new system calls to asm/unistd.h, but unfortunately it turned out to
  be wrong, pointing arch/tile compat mode at the native handlers rather
  than the compat ones.

  This was spotted by Yury Norov, who is working on ILP32 mode for
  arch/arm64, which would have the same problem when merged.  This fixes
  the table to use the correct compat syscalls, like the other 64-bit
  architectures do.

  I'll try to find the time to come up with a solution that prevents
  this problem from happening again, by allowing all future system calls
  to just get added in a single file for use by all architectures"

* tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: use compat version for preadv2 and pwritev2

8 years agoMerge tag 'iio-fixes-for-4.6d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23...
Greg Kroah-Hartman [Thu, 5 May 2016 22:38:07 +0000 (15:38 -0700)]
Merge tag 'iio-fixes-for-4.6d' of git://git./linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Fourth set of IIO fixes for the 4.6 cycle.

This last minute set is concerned with a regression in the mpu6050 driver.
The regression causes a null pointer dereference on any ACPI device
that has one of these present such as the ASUS T100TA Baytrail/T.

The issue was known but thought (i.e. missunderstood by me)
to only be a possible with no reports, so was routed via the normal merge
window.  Turns out this was wrong (thanks to Alan for reporting the crash).

The pull is just for the null dereference fix and a followup fix
that also stops the reported name of the device being NULL.

* mpu6050
  - Fix a 'possible' NULL dereference introduced as part of splitting the
  driver to allow both i2c and spi to be supported.  The issue affects ACPI
  systems with this device.
  - Fix a follow up issue where the name and chip id both get set to null if
  the device driver instance is instantiated from ACPI tables.

8 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Thu, 5 May 2016 22:31:35 +0000 (15:31 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple last-minute fixes for ARM SoCs.  Most of them are
  for the OMAP platforms, the rest are all for different platforms.

  OMAP:
     All dts fixes, mostly affecting voltages and pinctrl for various
     device drivers:

      - Regulator minimum voltage fixes for omap5
      - ISP syscon register offset fix for omap3
      - Fix regulator initial modes for n900
      - Fix omap5 pinctrl wkup instance size

  Allwinner:
     Remove incorrect constraints from a dcdc1 regulator

  Alltera SoCFPGA:
     Fix compilation in thumb2 mode

  Samsung exynos:
     Fix a potential oops in the pm-domain error handling

  Davinci:
     Avoid a link error if NVMEM is disabled

  Renesas:
     Do not mark an external uart clock as disabled, to allow probing
     the uarts"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: davinci: only use NVMEM when available
  ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel
  ARM: dts: omap5: fix range of permitted wakeup pinmux registers
  ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode
  ARM: dts: omap3: Fix ISP syscon register offset
  ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges
  ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges
  arm64: dts: r8a7795: Don't disable referenced optional scif clock
  ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
  ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator

8 years agomaintainers: update rmk's email address(es)
Russell King [Thu, 5 May 2016 16:12:54 +0000 (17:12 +0100)]
maintainers: update rmk's email address(es)

Update my email and web addresses in the kernel maintainers file.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agowriteback: Fix performance regression in wb_over_bg_thresh()
Howard Cochran [Thu, 10 Mar 2016 06:12:39 +0000 (01:12 -0500)]
writeback: Fix performance regression in wb_over_bg_thresh()

Commit 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use
wb_domain aware operations") unintentionally changed this function's
meaning from "are there more dirty pages than the background writeback
threshold" to "are there more dirty pages than the writeback threshold".
The background writeback threshold is typically half of the writeback
threshold, so this had the effect of raising the number of dirty pages
required to cause a writeback worker to perform background writeout.

This can cause a very severe performance regression when a BDI uses
BDI_CAP_STRICTLIMIT because balance_dirty_pages() and the writeback worker
can now disagree on whether writeback should be initiated.

For example, in a system having 1GB of RAM, a single spinning disk, and a
"pass-through" FUSE filesystem mounted over the disk, application code
mmapped a 128MB file on the disk and was randomly dirtying pages in that
mapping.

Because FUSE uses strictlimit and has a default max_ratio of only 1%, in
balance_dirty_pages, thresh is ~200, bg_thresh is ~100, and the
dirty_freerun_ceiling is the average of those, ~150. So, it pauses the
dirtying processes when we have 151 dirty pages and wakes up a background
writeback worker. But the worker tests the wrong threshold (200 instead of
100), so it does not initiate writeback and just returns.

Thus, balance_dirty_pages keeps looping, sleeping and then waking up the
worker who will do nothing. It remains stuck in this state until the few
dirty pages that we have finally expire and we write them back for that
reason. Then the whole process repeats, resulting in near-zero throughput
through the FUSE BDI.

The fix is to call the parameterized variant of wb_calc_thresh, so that the
worker will do writeback if the bg_thresh is exceeded which was the
behavior before the referenced commit.

Fixes: 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations")
Signed-off-by: Howard Cochran <hcochran@kernelspring.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.2+
Tested-by Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
8 years agoARM: 8573/1: domain: move {set,get}_domain under config guard
Vladimir Murzin [Wed, 4 May 2016 09:39:02 +0000 (10:39 +0100)]
ARM: 8573/1: domain: move {set,get}_domain under config guard

Recursive undefined instrcution falut is seen with R-class taking an
exception. The reson for that is __show_regs() tries to get domain
information, but domains is not available on !MMU cores, like R/M
class.

Fix it by puting {set,get}_domain functions under CONFIG_CPU_CP15_MMU
guard and providing stubs for the case where domains is not supported.

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
8 years agoARM: 8572/1: nommu: change memory reserve for the vectors
Jean-Philippe Brucker [Wed, 4 May 2016 09:38:12 +0000 (10:38 +0100)]
ARM: 8572/1: nommu: change memory reserve for the vectors

Commit 19accfd3 (ARM: move vector stubs) moved the vector stubs in an
additional page above the base vector one. This change wasn't taken into
account by the nommu memreserve.
This patch ensures that the kernel won't overwrite any vector stub on
nommu.

[changed the MPU side too]

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
8 years agoARM: 8571/1: nommu: fix PMSAv7 setup
Jean-Philippe Brucker [Wed, 4 May 2016 09:37:22 +0000 (10:37 +0100)]
ARM: 8571/1: nommu: fix PMSAv7 setup

Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) broke the support for
MPU on ARMv7-R. This patch adapts the code inside CONFIG_ARM_MPU to use
memblocks appropriately.

MPU initialisation only uses the first memory region, and removes all
subsequent ones. Because looping over all regions that need removal is
inefficient, and memblock_remove already handles memory ranges, we can
flatten the 'for_each_memblock' part.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
8 years agoIB/iser: Fix max_sectors calculation
Christoph Hellwig [Mon, 18 Apr 2016 21:06:28 +0000 (17:06 -0400)]
IB/iser: Fix max_sectors calculation

iSER currently has a couple places that set max_sectors in either the host
template or SCSI host, and all of them get it wrong.

This patch instead uses a single assignment that (hopefully) gets it right:
the max_sectors value must be derived from the number of segments in the
FR or FMR structure, but actually be one lower than the page size multiplied
by the number of sectors, as it has to handle the case of non-aligned I/O.

Without this I get trivial to reproduce hangs when running xfstests
(on XFS) over iSER to Linux targets.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm...
Linus Torvalds [Thu, 5 May 2016 15:41:57 +0000 (08:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull userns fix from Eric Biederman:
 "This contains just a single fix for a nasty oops"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  propogate_mnt: Handle the first propogated copy being a slave

8 years agoMerge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Thu, 5 May 2016 15:26:54 +0000 (08:26 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio/qemu fixes from Michael Tsirkin:
 "A couple of fixes for virtio and for the new QEMU fw cfg driver"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: Silence uninitialized variable warning
  firmware: qemu_fw_cfg.c: potential unintialized variable

8 years agopropogate_mnt: Handle the first propogated copy being a slave
Eric W. Biederman [Thu, 5 May 2016 14:29:29 +0000 (09:29 -0500)]
propogate_mnt: Handle the first propogated copy being a slave

When the first propgated copy was a slave the following oops would result:
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
> IP: [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0
> PGD bacd4067 PUD bac66067 PMD 0
> Oops: 0000 [#1] SMP
> Modules linked in:
> CPU: 1 PID: 824 Comm: mount Not tainted 4.6.0-rc5userns+ #1523
> Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
> task: ffff8800bb0a8000 ti: ffff8800bac3c000 task.ti: ffff8800bac3c000
> RIP: 0010:[<ffffffff811fba4e>]  [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0
> RSP: 0018:ffff8800bac3fd38  EFLAGS: 00010283
> RAX: 0000000000000000 RBX: ffff8800bb77ec00 RCX: 0000000000000010
> RDX: 0000000000000000 RSI: ffff8800bb58c000 RDI: ffff8800bb58c480
> RBP: ffff8800bac3fd48 R08: 0000000000000001 R09: 0000000000000000
> R10: 0000000000001ca1 R11: 0000000000001c9d R12: 0000000000000000
> R13: ffff8800ba713800 R14: ffff8800bac3fda0 R15: ffff8800bb77ec00
> FS:  00007f3c0cd9b7e0(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000010 CR3: 00000000bb79d000 CR4: 00000000000006e0
> Stack:
>  ffff8800bb77ec00 0000000000000000 ffff8800bac3fd88 ffffffff811fbf85
>  ffff8800bac3fd98 ffff8800bb77f080 ffff8800ba713800 ffff8800bb262b40
>  0000000000000000 0000000000000000 ffff8800bac3fdd8 ffffffff811f1da0
> Call Trace:
>  [<ffffffff811fbf85>] propagate_mnt+0x105/0x140
>  [<ffffffff811f1da0>] attach_recursive_mnt+0x120/0x1e0
>  [<ffffffff811f1ec3>] graft_tree+0x63/0x70
>  [<ffffffff811f1f6b>] do_add_mount+0x9b/0x100
>  [<ffffffff811f2c1a>] do_mount+0x2aa/0xdf0
>  [<ffffffff8117efbe>] ? strndup_user+0x4e/0x70
>  [<ffffffff811f3a45>] SyS_mount+0x75/0xc0
>  [<ffffffff8100242b>] do_syscall_64+0x4b/0xa0
>  [<ffffffff81988f3c>] entry_SYSCALL64_slow_path+0x25/0x25
> Code: 00 00 75 ec 48 89 0d 02 22 22 01 8b 89 10 01 00 00 48 89 05 fd 21 22 01 39 8e 10 01 00 00 0f 84 e0 00 00 00 48 8b 80 d8 00 00 00 <48> 8b 50 10 48 89 05 df 21 22 01 48 89 15 d0 21 22 01 8b 53 30
> RIP  [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0
>  RSP <ffff8800bac3fd38>
> CR2: 0000000000000010
> ---[ end trace 2725ecd95164f217 ]---

This oops happens with the namespace_sem held and can be triggered by
non-root users.  An all around not pleasant experience.

To avoid this scenario when finding the appropriate source mount to
copy stop the walk up the mnt_master chain when the first source mount
is encountered.

Further rewrite the walk up the last_source mnt_master chain so that
it is clear what is going on.

The reason why the first source mount is special is that it it's
mnt_parent is not a mount in the dest_mnt propagation tree, and as
such termination conditions based up on the dest_mnt mount propgation
tree do not make sense.

To avoid other kinds of confusion last_dest is not changed when
computing last_source.  last_dest is only used once in propagate_one
and that is above the point of the code being modified, so changing
the global variable is meaningless and confusing.

Cc: stable@vger.kernel.org
fixes: f2ebb3a921c1ca1e2ddd9242e95a1989a50c4c68 ("smarter propagate_mnt()")
Reported-by: Tycho Andersen <tycho.andersen@canonical.com>
Reviewed-by: Seth Forshee <seth.forshee@canonical.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>