platform/kernel/linux-exynos.git
6 years agoALSA: hda - Implement mic-mute LED mode enum
Takashi Iwai [Tue, 22 Aug 2017 14:52:10 +0000 (16:52 +0200)]
ALSA: hda - Implement mic-mute LED mode enum

Dell laptops have another LED for mic-mute in addition to the master
mute.  The former is tied with the capture switch (in a reverse way)
while the latter is tied with the master playback switch.  We already
have an enum control to change the behavior for the master mute LED in
different ways, e.g. keeping always off or turning off at mute.  But,
the mic-mute LED has no such management but its behavior is
hard-coded.

This patch implements an enum control to change the mic-mute LED
behavior like what we have for the master mute LED.  The ctl provides
four modes: keep-on, keep-off, follow-capture and follow-mute.  The
default mode is the last one, follow-mute, which follows the capture
mute, i.e. LED turning on when the capture is off, and turning off
when the capture is active.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ctxfi: Use common error handling code in two functions
Markus Elfring [Tue, 22 Aug 2017 16:43:42 +0000 (18:43 +0200)]
ALSA: ctxfi: Use common error handling code in two functions

Add jump targets so that a bit of exception handling can be better reused
at the end of these functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pcsp: Use common error handling code in snd_card_pcsp_probe()
Markus Elfring [Tue, 22 Aug 2017 15:33:33 +0000 (17:33 +0200)]
ALSA: pcsp: Use common error handling code in snd_card_pcsp_probe()

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ice1712: Add support for STAudio ADCIII
Takashi Iwai [Mon, 21 Aug 2017 14:13:27 +0000 (16:13 +0200)]
ALSA: ice1712: Add support for STAudio ADCIII

STAudio ADCIII has the same SSID as Hoontech STDSP24, but requires a
slightly different configuration.  This patch allows user to choose
this model via model=staudio option to set the proper configuration
for the board.

Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1048934
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: firewire: add const qualifier to identifiers for read-only symbols
Takashi Sakamoto [Tue, 22 Aug 2017 13:58:15 +0000 (22:58 +0900)]
ALSA: firewire: add const qualifier to identifiers for read-only symbols

Drivers in ALSA firewire stack still includes some symbols which can be
moved to a section for read-only symbols.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoMerge branch 'for-linus' into for-next
Takashi Iwai [Tue, 22 Aug 2017 13:44:45 +0000 (15:44 +0200)]
Merge branch 'for-linus' into for-next

Conflicts:
sound/core/control.c

6 years agoALSA: core: Fix unexpected error at replacing user TLV
Takashi Iwai [Tue, 22 Aug 2017 06:15:13 +0000 (08:15 +0200)]
ALSA: core: Fix unexpected error at replacing user TLV

When user tries to replace the user-defined control TLV, the kernel
checks the change of its content via memcmp().  The problem is that
the kernel passes the return value from memcmp() as is.  memcmp()
gives a non-zero negative value depending on the comparison result,
and this shall be recognized as an error code.

The patch covers that corner-case, return 1 properly for the changed
TLV.

Fixes: 8aa9b586e420 ("[ALSA] Control API - more robust TLV implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: usb-audio: Add delay quirk for H650e/Jabra 550a USB headsets
Joakim Tjernlund [Tue, 22 Aug 2017 06:33:53 +0000 (08:33 +0200)]
ALSA: usb-audio: Add delay quirk for H650e/Jabra 550a USB headsets

These headsets reports a lot of: cannot set freq 44100 to ep 0x81
and need a small delay between sample rate settings, just like
Zoom R16/24. Add both headsets to the Zoom R16/24 quirk for
a 1 ms delay between control msgs.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: firewire-motu: add support for MOTU Audio Express
Takashi Sakamoto [Sun, 20 Aug 2017 12:25:04 +0000 (21:25 +0900)]
ALSA: firewire-motu: add support for MOTU Audio Express

MOTU Audio Express is one of third generation in MOTU FireWire
series, produced in 2011. This model consists of three chips:
 * TI TSB41AB2 (Physical layer for IEEE 1394 bus)
 * Microchip USB3300 (Hi-Speed USB Device with ULPI interface)
 * Xilinx Spartan-3A FPGA, XC3S400A (Link layer for IEEE 1394 bus, packet
   processing and data block processing layer)

This commit adds support for this model. As I expected, it works with
current implementaion of protocol version 3. On the other hand, the unit
has a quirk to request subaction originated by any driver.

11:45:51.287643 firewire_ohci 0000:03:00.0: AT spd 2 tl 1f, ffc1 -> ffc0, -reserved-, QW req, fffff0000b14 = 02000200
11:45:51.289193 firewire_ohci 0000:03:00.0: AR spd 2 tl 1f, ffc0 -> ffc1, ack_complete, W resp
11:45:51.289381 fireire_core 0000:03:00.0: unsolicited response (source ffc0, tlabel 1f)
11:45:51.313071 firewire_ohci 0000:03:00.0: AT spd 2 tl 20, ffc1 -> ffc0, ack_pending , QW req, fffff0000b14 = 02000200
11:45:51.314539 firewire_ohci 0000:03:00.0: AR spd 2 tl 20, ffc0 -> ffc1, ack_complete, W resp

In 1394 OHCI (rev.1.1), after OUTPUT_LAST* descriptors is processed,
'xferStaus' field is filled with 'ContextControl[0:15]' (see clause 7.1.3).
5 bits in LSB side of the field has ack code in acknowledge from the unit
(see clause 7.2.2). A list of the code is shown in Table 3-2.

As long as I investigated, in a case of the '-reserved-' acknowledge
message from the unit, the field has 0x10. On the table, this value is
'Reserved for definition by future 1394 standards'. As long as I know,
any specifications of IEEE 1394 has no such extensions, thus the unit is
out of specification. Besides, I note that the unit does not always
acknowledge with the invalid code. I guess this is a bug of firmware. I
confirmed the bug in firmware version 1.04 and this is the latest one.

$ cd linux-firewire-utils
$ python2 ./src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  0410a756  bus_info_length 4, crc_length 16, crc 42838
404  31333934  bus_name "1394"
408  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c  0001f200  company_id 0001f2     |
410  000a8a7b  device_id 00000a8a7b  | EUI-64 0001f200000a8a7b

               root directory
               -----------------------------------------------------------------
414  0004ef04  directory_length 4, crc 61188
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  d1000002  --> unit directory at 428
424  8d000005  --> eui-64 leaf at 438

               unit directory at 428
               -----------------------------------------------------------------
428  00031680  directory_length 3, crc 5760
42c  120001f2  specifier id
430  13000033  version
434  17104800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  00025ef3  leaf_length 2, crc 24307
43c  0001f200  company_id 0001f2     |
440  000a8a7b  device_id 00000a8a7b  | EUI-64 0001f200000a8a7b

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: firewire-motu: add specification flag for position of flag for MIDI messages
Takashi Sakamoto [Sun, 20 Aug 2017 12:25:03 +0000 (21:25 +0900)]
ALSA: firewire-motu: add specification flag for position of flag for MIDI messages

In protocols of MOTU FireWire series, when transferring MIDI messages,
transmitter set existence flag to one byte on first several quadlets. The
position differs depending on protocols and models, however two cases are
confirmed; in 5th byte and 8th byte from MSB side.

This commit adds a series of specification flag to describe them. When
the existence flag is in the 5th byte, SND_MOTU_SPEC_[R|T]X_MIDI_2ND_Q is
used. Else, another set of the flag is used. Here, '_Q' means quadlet.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: firewire-motu: destroy stream data surely at failure of card initialization
Takashi Sakamoto [Sun, 20 Aug 2017 06:55:02 +0000 (15:55 +0900)]
ALSA: firewire-motu: destroy stream data surely at failure of card initialization

When failing sound card registration after initializing stream data, this
module leaves allocated data in stream data. This commit fixes the bug.

Fixes: 9b2bb4f2f4a2 ('ALSA: firewire-motu: add stream management functionality')
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: firewire: fix NULL pointer dereference when releasing uninitialized data of...
Takashi Sakamoto [Sun, 20 Aug 2017 06:54:26 +0000 (15:54 +0900)]
ALSA: firewire: fix NULL pointer dereference when releasing uninitialized data of iso-resource

When calling 'iso_resource_free()' for uninitialized data, this function
causes NULL pointer dereference due to its 'unit' member. This occurs when
unplugging audio and music units on IEEE 1394 bus at failure of card
registration.

This commit fixes the bug. The bug exists since kernel v4.5.

Fixes: 324540c4e05c ('ALSA: fireface: postpone sound card registration') at v4.12
Fixes: 8865a31e0fd8 ('ALSA: firewire-motu: postpone sound card registration') at v4.12
Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7
Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7
Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') at v4.7
Fixes: 7d3c1d5901aa ('ALSA: fireworks: delayed registration of sound card') at v4.7
Fixes: 04a2c73c97eb ('ALSA: bebob: delayed registration of sound card') at v4.7
Fixes: b59fb1900b4f ('ALSA: dice: postpone card registration') at v4.5
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: control: use counting semaphore as write lock for ELEM_WRITE operation
Takashi Sakamoto [Sun, 20 Aug 2017 04:49:08 +0000 (13:49 +0900)]
ALSA: control: use counting semaphore as write lock for ELEM_WRITE operation

In ALSA control interface, applications can execute two types of request
for value of members on each element; ELEM_READ and ELEM_WRITE. In ALSA
control core, these two requests are handled within read lock of a
counting semaphore, therefore several processes can run to execute these
two requests at the same time. This has an issue because ELEM_WRITE
requests have an effect to change state of the target element. Concurrent
access should be controlled for each of ELEM_READ/ELEM_WRITE case.

This commit uses the counting semaphore as write lock for ELEM_WRITE
requests, while use it as read lock for ELEM_READ requests. The state of
a target element is maintained exclusively between ELEM_WRITE/ELEM_READ
operations.

There's a concern. If the counting semaphore is acquired for read lock
in implementations of 'struct snd_kcontrol.put()' in each driver, this
commit shall cause dead lock. As of v4.13-rc5, 'snd-mixer-oss.ko',
'snd-emu10k1.ko' and 'snd-soc-sst-atom-hifi2-platform.ko' includes codes
for read locks, but these are not in a call graph from
'struct snd_kcontrol.put(). Therefore, this commit is safe.

In current implementation, the same solution is applied for the other
operations to element; e.g. ELEM_LOCK and ELEM_UNLOCK. There's another
discussion about an overhead to maintain concurrent access to an element
during operating the other elements on the same card instance, because the
lock primitive is originally implemented to maintain a list of elements on
the card instance. There's a substantial difference between
per-element-list lock and per-element lock.

Here, let me investigate another idea to add per-element lock to maintain
the concurrent accesses with inquiry/change requests to an element. It's
not so frequent for applications to operate members on elements, while
adding a new lock primitive to structure increases memory footprint for
all of element sets somehow. Experimentally, inquiry operation is more
frequent than change operation and usage of counting semaphore for the
inquiry operation brings no blocking to the other inquiry operations. Thus
the overhead is not so critical for usual applications. For the above
reasons, in this commit, the per-element lock is not introduced.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations
Takashi Sakamoto [Sun, 20 Aug 2017 04:49:07 +0000 (13:49 +0900)]
ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations

ALSA control core handles ELEM_READ/ELEM_WRITE requests within lock
acquisition of a counting semaphore. The lock is acquired in helper
functions in the end of call path before calling implementations of each
driver.

ioctl(2) with SNDRV_CTL_ELEM_READ
...
->snd_ctl_ioctl()
  ->snd_ctl_elem_read_user()
    ->snd_ctl_elem_read()
      ->down_read(controls_rwsem)
      ->snd_ctl_find_id()
      ->struct snd_kcontrol.get()
      ->up_read(controls_rwsem)

ioctl(2) with SNDRV_CTL_ELEM_WRITE
...
->snd_ctl_ioctl()
  ->snd_ctl_elem_write_user()
    ->snd_ctl_elem_write()
      ->down_read(controls_rwsem)
      ->snd_ctl_find_id()
      ->struct snd_kcontrol.put()
      ->up_read(controls_rwsem)

This commit moves the lock acquisition to middle of the call graph to
simplify the helper functions. As a result:

ioctl(2) with SNDRV_CTL_ELEM_READ
...
->snd_ctl_ioctl()
  ->snd_ctl_elem_read_user()
    ->down_read(controls_rwsem)
    ->snd_ctl_elem_read()
      ->snd_ctl_find_id()
      ->struct snd_kcontrol.get()
    ->up_read(controls_rwsem)

ioctl(2) with SNDRV_CTL_ELEM_WRITE
...
->snd_ctl_ioctl()
  ->snd_ctl_elem_write_user()
    ->down_read(controls_rwsem)
    ->snd_ctl_elem_write()
      ->snd_ctl_find_id()
      ->struct snd_kcontrol.put()
    ->up_read(controls_rwsem)

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: control: queue events within locking of controls_rwsem for ELEM_WRITE operation
Takashi Sakamoto [Sun, 20 Aug 2017 04:49:06 +0000 (13:49 +0900)]
ALSA: control: queue events within locking of controls_rwsem for ELEM_WRITE operation

Any control event is queued by a call of snd_ctl_notify(). This function
adds the event to each queue of opened file data corresponding to ALSA
control character devices. This function acquired two types of lock; a
counting semaphore for a list of the opened file data and a spinlock for
card data opened by the file. Typically, this function is called after
acquiring a counting semaphore for a list of elements in the card data.

In current implementation of a handler for ELEM_WRITE request, the
function is called after releasing the semaphore for a list of elements
in the card data. This release is not necessarily needed.

This commit removes the release to call the function within the critical
section so that later commits are simple.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: usb: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:21 +0000 (13:15 +0530)]
ALSA: usb: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: spi: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:20 +0000 (13:15 +0530)]
ALSA: spi: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sparc: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:19 +0000 (13:15 +0530)]
ALSA: sparc: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sh: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:18 +0000 (13:15 +0530)]
ALSA: sh: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ppc: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:17 +0000 (13:15 +0530)]
ALSA: ppc: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pcmcia: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:16 +0000 (13:15 +0530)]
ALSA: pcmcia: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: parisc: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:15 +0000 (13:15 +0530)]
ALSA: parisc: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: mips: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:14 +0000 (13:15 +0530)]
ALSA: mips: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: firewire: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:13 +0000 (13:15 +0530)]
ALSA: firewire: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: drivers: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:12 +0000 (13:15 +0530)]
ALSA: drivers: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: atmel: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:11 +0000 (13:15 +0530)]
ALSA: atmel: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: arm: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:10 +0000 (13:15 +0530)]
ALSA: arm: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: aoa: constify snd_pcm_ops structures
Arvind Yadav [Fri, 18 Aug 2017 07:45:09 +0000 (13:15 +0530)]
ALSA: aoa: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: emu10k1: Fix forgotten user-copy conversion in init code
Takashi Iwai [Fri, 18 Aug 2017 08:55:10 +0000 (10:55 +0200)]
ALSA: emu10k1: Fix forgotten user-copy conversion in init code

The commit d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage")
converted the user-space copy hack with set_fs() to the direct
memcpy(), but one place was forgotten.  This resulted in the error
from snd_emu10k1_init_efx(), eventually failed to load the driver.
Fix the missing piece.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196687
Fixes: d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: usb-audio: add DSD support for new Amanero PID
Jussi Laako [Fri, 18 Aug 2017 07:42:14 +0000 (10:42 +0300)]
ALSA: usb-audio: add DSD support for new Amanero PID

Add DSD support for new Amanero Combo384 firmware version with a new
PID. This firmware uses DSD_U32_BE.

Fixes: 3eff682d765b ("ALSA: usb-audio: Support both DSD LE/BE Amanero firmware versions")
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: usb-audio: don't retry snd_usb_ctl_msg after timeout
Stephen Barber [Thu, 17 Aug 2017 22:17:46 +0000 (15:17 -0700)]
ALSA: usb-audio: don't retry snd_usb_ctl_msg after timeout

A few calls to snd_usb_ctl_msg wrap the function in a retry loop. In
the worst case, the timeout for snd_usb_ctl_msg is 5 seconds, which when
retried 10 times (for example, if a device is removed) could cause a
probe to hang for ~50 seconds.

Example stack trace from 3.14 which triggered a hung task timeout:
Call Trace:
 [<ffffffffa2c1f720>] ? inet6_set_link_af.part.35+0x12/0x12
 [<ffffffffa2c20309>] schedule+0x6e/0x70
 [<ffffffffa2c1f81c>] schedule_timeout+0xfc/0x13c
 [<ffffffffa2667bbc>] ? rcu_read_unlock_sched_notrace+0x17/0x17
 [<ffffffffa2c20d68>] __wait_for_common+0x153/0x190
 [<ffffffffa2c20d68>] ? __wait_for_common+0x153/0x190
 [<ffffffffa26890e5>] ? wake_up_state+0x12/0x12
 [<ffffffffa2c20e0e>] wait_for_completion_timeout+0x1d/0x1f
 [<ffffffffa2a07c70>] usb_start_wait_urb+0x93/0xf1
 [<ffffffffa2a07daf>] usb_control_msg+0xe1/0x11d
 [<ffffffffc02cd254>] snd_usb_ctl_msg+0x9c/0xf1 [snd_usb_audio]
 [<ffffffffc02ce191>] snd_usb_mixer_set_ctl_value+0x124/0xab1 [snd_usb_audio]
 [<ffffffffc02ce230>] snd_usb_mixer_set_ctl_value+0x1c3/0xab1 [snd_usb_audio]
 [<ffffffffc02ce58e>] snd_usb_mixer_set_ctl_value+0x521/0xab1 [snd_usb_audio]
 [<ffffffffc02cee88>] snd_usb_mixer_add_control+0x36a/0x1264 [snd_usb_audio]
 [<ffffffffc02cf323>] snd_usb_mixer_add_control+0x805/0x1264 [snd_usb_audio]
 [<ffffffffa2a06e11>] ? usb_free_urb+0x1a/0x1c
 [<ffffffffc02cfcf7>] snd_usb_mixer_add_control+0x11d9/0x1264 [snd_usb_audio]
 [<ffffffffc02d000f>] snd_usb_create_mixer+0xbc/0x286 [snd_usb_audio]
 [<ffffffffc02cac18>] 0xffffffffc02cac17
 [<ffffffffa2a0aaf1>] usb_probe_interface+0x17c/0x21c
 [<ffffffffa29a65bc>] driver_probe_device+0xae/0x1fa
 [<ffffffffa29a6767>] __device_attach_driver+0x5f/0x66
 [<ffffffffa29a6708>] ? driver_probe_device+0x1fa/0x1fa
 [<ffffffffa29a4a60>] bus_for_each_drv+0x87/0xaa
 [<ffffffffa29a688a>] __device_attach+0x9d/0x101
 [<ffffffffa29a6913>] device_initial_probe+0x13/0x15
 [<ffffffffa29a5ae6>] bus_probe_device+0x33/0x96
 [<ffffffffa29a3d19>] device_add+0x328/0x547
 [<ffffffffa2a09355>] usb_set_configuration+0x624/0x674
 [<ffffffffa2a11949>] generic_probe+0x45/0x77
 [<ffffffffa2a0a962>] usb_probe_device+0x2d/0x40
 [<ffffffffa29a65bc>] driver_probe_device+0xae/0x1fa
 [<ffffffffa29a6767>] __device_attach_driver+0x5f/0x66
 [<ffffffffa29a6708>] ? driver_probe_device+0x1fa/0x1fa
 [<ffffffffa29a4a60>] bus_for_each_drv+0x87/0xaa
 [<ffffffffa29a688a>] __device_attach+0x9d/0x101
 [<ffffffffa29a6913>] device_initial_probe+0x13/0x15
 [<ffffffffa29a5ae6>] bus_probe_device+0x33/0x96
 [<ffffffffa29a3d19>] device_add+0x328/0x547
 [<ffffffffa29030bc>] ? add_device_randomness+0x111/0x130
 [<ffffffffa2a00967>] usb_new_device+0x2a2/0x3c0
 [<ffffffffa2a02ddc>] hub_thread+0xa3d/0xeed
 [<ffffffffa2c2010d>] ? __schedule+0x41e/0x5ac
 [<ffffffffa26957ce>] ? finish_wait+0x62/0x62
 [<ffffffffa2a0239f>] ? usb_reset_device+0x16a/0x16a
 [<ffffffffa267b255>] kthread+0x108/0x110
 [<ffffffffa267b14d>] ? __kthread_parkme+0x67/0x67
 [<ffffffffa2c23b2c>] ret_from_fork+0x7c/0xb0
 [<ffffffffa267b14d>] ? __kthread_parkme+0x67/0x67

Signed-off-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
Takashi Iwai [Wed, 16 Aug 2017 12:18:37 +0000 (14:18 +0200)]
ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices

C-Media devices (at least some models) mute the playback stream when
volumes are set to the minimum value.  But this isn't informed via TLV
and the user-space, typically PulseAudio, gets confused as if it's
still played in a low volume.

This patch adds the new flag, min_mute, to struct usb_mixer_elem_info
for indicating that the mixer element is with the minimum-mute volume.
This flag is set for known C-Media devices in
snd_usb_mixer_fu_apply_quirk() in turn.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: parisc: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:16:00 +0000 (14:46 +0530)]
ALSA: parisc: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: usb: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:59 +0000 (14:45 +0530)]
ALSA: usb: make snd_pcm_hardware const

Make this const as it is only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sparc: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:58 +0000 (14:45 +0530)]
ALSA: sparc: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sh: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:57 +0000 (14:45 +0530)]
ALSA: sh: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ppc: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:56 +0000 (14:45 +0530)]
ALSA: ppc: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pcmcia: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:55 +0000 (14:45 +0530)]
ALSA: pcmcia: make snd_pcm_hardware const

Make this const as it is only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pci: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:54 +0000 (14:45 +0530)]
ALSA: pci: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: mips: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:53 +0000 (14:45 +0530)]
ALSA: mips: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: isa: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:52 +0000 (14:45 +0530)]
ALSA: isa: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: drivers: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:51 +0000 (14:45 +0530)]
ALSA: drivers: make snd_pcm_hardware const

Make these const as they are only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: atmel: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:50 +0000 (14:45 +0530)]
ALSA: atmel: make snd_pcm_hardware const

Make this const as it is only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: arm: make snd_pcm_hardware const
Bhumika Goyal [Thu, 17 Aug 2017 09:15:49 +0000 (14:45 +0530)]
ALSA: arm: make snd_pcm_hardware const

Make this const as it is only used in a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: wavefront: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:30 +0000 (15:36 +0530)]
ALSA: wavefront: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sscape: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:29 +0000 (15:36 +0530)]
ALSA: sscape: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sb16: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:28 +0000 (15:36 +0530)]
ALSA: sb16: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: opti9xx: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:27 +0000 (15:36 +0530)]
ALSA: opti9xx: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: msnd: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:26 +0000 (15:36 +0530)]
ALSA: msnd: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: gus: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:25 +0000 (15:36 +0530)]
ALSA: gus: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: es1688: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:24 +0000 (15:36 +0530)]
ALSA: es1688: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: cs4236: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:23 +0000 (15:36 +0530)]
ALSA: cs4236: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: cmi8330: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:22 +0000 (15:36 +0530)]
ALSA: cmi8330: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: azt2320: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:21 +0000 (15:36 +0530)]
ALSA: azt2320: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: als100: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:20 +0000 (15:36 +0530)]
ALSA: als100: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ad1816a: constify pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:19 +0000 (15:36 +0530)]
ALSA: ad1816a: constify pnp_card_device_id

pnp_card_device_id are not supposed to change at runtime. All functions
working with pnp_card_device_id provided by <linux/pnp.h> work with
const pnp_card_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: opl3sa2: constify pnp_device_id and pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:18 +0000 (15:36 +0530)]
ALSA: opl3sa2: constify pnp_device_id and pnp_card_device_id

*_device_id are not supposed to change at runtime. All functions
working with *_device_id provided by <linux/pnp.h> work with
const *_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: es18xx: constify pnp_device_id and pnp_card_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:17 +0000 (15:36 +0530)]
ALSA: es18xx: constify pnp_device_id and pnp_card_device_id

*_device_id are not supposed to change at runtime. All functions
working with *_device_id provided by <linux/pnp.h> work with
const *_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: drivers: mpu401: constify pnp_device_id
Arvind Yadav [Thu, 17 Aug 2017 10:06:16 +0000 (15:36 +0530)]
ALSA: drivers: mpu401: constify pnp_device_id

pnp_device_id are not supposed to change at runtime. All functions
working with pnp_device_id provided by <linux/pnp.h> work with
const pnp_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: hda: make snd_kcontrol_new const
Bhumika Goyal [Wed, 16 Aug 2017 08:44:11 +0000 (14:14 +0530)]
ALSA: hda: make snd_kcontrol_new const

Make these const as they are only passed as the 3rd argument to the
function snd_hda_gen_add_kctl, which is of type const.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pcxhr: make snd_kcontrol_new const
Bhumika Goyal [Wed, 16 Aug 2017 08:44:10 +0000 (14:14 +0530)]
ALSA: pcxhr: make snd_kcontrol_new const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: aoa: make snd_kcontrol_new const
Bhumika Goyal [Wed, 16 Aug 2017 08:44:09 +0000 (14:14 +0530)]
ALSA: aoa: make snd_kcontrol_new const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: firewire-motu: constify snd_rawmidi_ops structures
Julia Lawall [Tue, 15 Aug 2017 08:09:54 +0000 (10:09 +0200)]
ALSA: firewire-motu: constify snd_rawmidi_ops structures

These snd_rawmidi_ops structures are only passed as the third
argument of snd_rawmidi_set_ops.  This argument is const, so the
snd_rawmidi_ops structures can be const too.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: usb-audio: Apply sample rate quirk to Sennheiser headset
Takashi Iwai [Mon, 14 Aug 2017 12:35:50 +0000 (14:35 +0200)]
ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset

A Senheisser headset requires the typical sample-rate quirk for
avoiding spurious errors from inquiring the current sample rate like:
 usb 1-1: 2:1: cannot get freq at ep 0x4
 usb 1-1: 3:1: cannot get freq at ep 0x83

The USB ID 1395:740a has to be added to the entries in
snd_usb_get_sample_rate_quirk().

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1052580
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agosound: emu8000: constify emu8000_ops
Julia Lawall [Mon, 14 Aug 2017 17:13:26 +0000 (19:13 +0200)]
sound: emu8000: constify emu8000_ops

The structure emu8000_ops is only copied into another structure, so
it can be const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: rme9652: Use common error handling code in two functions
Markus Elfring [Mon, 14 Aug 2017 20:00:40 +0000 (22:00 +0200)]
ALSA: rme9652: Use common error handling code in two functions

Add a jump target so that a bit of exception handling can be better reused
in these functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: seq: 2nd attempt at fixing race creating a queue
Daniel Mentz [Mon, 14 Aug 2017 21:46:01 +0000 (14:46 -0700)]
ALSA: seq: 2nd attempt at fixing race creating a queue

commit 4842e98f26dd80be3623c4714a244ba52ea096a8 ("ALSA: seq: Fix race at
creating a queue") attempted to fix a race reported by syzkaller. That
fix has been described as follows:

"
When a sequencer queue is created in snd_seq_queue_alloc(),it adds the
new queue element to the public list before referencing it.  Thus the
queue might be deleted before the call of snd_seq_queue_use(), and it
results in the use-after-free error, as spotted by syzkaller.

The fix is to reference the queue object at the right time.
"

Even with that fix in place, syzkaller reported a use-after-free error.
It specifically pointed to the last instruction "return q->queue" in
snd_seq_queue_alloc(). The pointer q is being used after kfree() has
been called on it.

It turned out that there is still a small window where a race can
happen. The window opens at
snd_seq_ioctl_create_queue()->snd_seq_queue_alloc()->queue_list_add()
and closes at
snd_seq_ioctl_create_queue()->queueptr()->snd_use_lock_use(). Between
these two calls, a different thread could delete the queue and possibly
re-create a different queue in the same location in queue_list.

This change prevents this situation by calling snd_use_lock_use() from
snd_seq_queue_alloc() prior to calling queue_list_add(). It is then the
caller's responsibility to call snd_use_lock_free(&q->use_lock).

Fixes: 4842e98f26dd ("ALSA: seq: Fix race at creating a queue")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370
Shih-Yuan Lee (FourDollars) [Mon, 14 Aug 2017 10:00:47 +0000 (18:00 +0800)]
ALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370

The initial pin configs for Dell headset mode of ALC3271 has changed.

/sys/class/sound/hwC0D0/init_pin_configs: (BIOS 0.1.4)
0x12 0xb7a60130
0x13 0xb8a61140
0x14 0x40000000
0x16 0x411111f0
0x17 0x90170110
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x4087992d
0x1e 0x411111f0
0x21 0x04211020

has changed to ...

/sys/class/sound/hwC0D0/init_pin_configs: (BIOS 0.2.0)
0x12 0xb7a60130
0x13 0x40000000
0x14 0x411111f0
0x16 0x411111f0
0x17 0x90170110
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x4067992d
0x1e 0x411111f0
0x21 0x04211020

Fixes: b4576de87243 ("ALSA: hda/realtek - Fix typo of pincfg for Dell quirk")
Signed-off-by: Shih-Yuan Lee (FourDollars) <sylee@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: wss: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:07 +0000 (17:28 +0530)]
ALSA: wss: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sb8: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:06 +0000 (17:28 +0530)]
ALSA: sb8: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: sb16: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:05 +0000 (17:28 +0530)]
ALSA: sb16: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: emu8000: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:04 +0000 (17:28 +0530)]
ALSA: emu8000: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: msnd: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:03 +0000 (17:28 +0530)]
ALSA: msnd: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: gus: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:02 +0000 (17:28 +0530)]
ALSA: gus: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: es18xx: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:01 +0000 (17:28 +0530)]
ALSA: es18xx: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: es1688: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:58:00 +0000 (17:28 +0530)]
ALSA: es1688: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ad1816a: constify snd_pcm_ops structures
Arvind Yadav [Fri, 11 Aug 2017 11:57:59 +0000 (17:27 +0530)]
ALSA: ad1816a: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: mpu401: Adjust four checks for null pointers
Markus Elfring [Sat, 12 Aug 2017 18:50:16 +0000 (20:50 +0200)]
ALSA: mpu401: Adjust four checks for null pointers

The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written !…

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: mpu401: Use common error handling code in snd_mpu401_uart_new()
Markus Elfring [Sat, 12 Aug 2017 18:40:17 +0000 (20:40 +0200)]
ALSA: mpu401: Use common error handling code in snd_mpu401_uart_new()

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: mpu401: Delete an error message for a failed memory allocation in snd_mpu401_ua...
Markus Elfring [Sat, 12 Aug 2017 18:20:11 +0000 (20:20 +0200)]
ALSA: mpu401: Delete an error message for a failed memory allocation in snd_mpu401_uart_new()

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: opl3: Delete an error message for a failed memory allocation in snd_opl3_new()
Markus Elfring [Sat, 12 Aug 2017 17:54:20 +0000 (19:54 +0200)]
ALSA: opl3: Delete an error message for a failed memory allocation in snd_opl3_new()

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ca0106: Delete an error message for a failed memory allocation in snd_ca0106_pc...
Markus Elfring [Sat, 12 Aug 2017 17:09:23 +0000 (19:09 +0200)]
ALSA: ca0106: Delete an error message for a failed memory allocation in snd_ca0106_pcm_open_capture_channel()

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: mixart: Delete an error message for a failed memory allocation in snd_mixart_cr...
Markus Elfring [Sat, 12 Aug 2017 16:45:42 +0000 (18:45 +0200)]
ALSA: mixart: Delete an error message for a failed memory allocation in snd_mixart_create()

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pcxhr: Delete an error message for a failed memory allocation in pcxhr_create()
Markus Elfring [Sat, 12 Aug 2017 16:14:54 +0000 (18:14 +0200)]
ALSA: pcxhr: Delete an error message for a failed memory allocation in pcxhr_create()

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pci: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:28 +0000 (21:01 +0530)]
ALSA: pci: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ymfpci: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:27 +0000 (21:01 +0530)]
ALSA: ymfpci: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: trident: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:26 +0000 (21:01 +0530)]
ALSA: trident: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: rme9652: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:25 +0000 (21:01 +0530)]
ALSA: rme9652: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: riptide: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:24 +0000 (21:01 +0530)]
ALSA: riptide: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: pcxhr: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:23 +0000 (21:01 +0530)]
ALSA: pcxhr: make snd_pcm_hardware const

Make this const as it is only used during a copy operation.
Done using Coccinelle

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ctxfi: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:22 +0000 (21:01 +0530)]
ALSA: ctxfi: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: mixart: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:21 +0000 (21:01 +0530)]
ALSA: mixart: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: lx6464es: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:20 +0000 (21:01 +0530)]
ALSA: lx6464es: make snd_pcm_hardware const

Make this const as it is only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: lola: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:19 +0000 (21:01 +0530)]
ALSA: lola: make snd_pcm_hardware const

Make this const as it is only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: emu10k1: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:18 +0000 (21:01 +0530)]
ALSA: emu10k1: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: cs5535audio: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:17 +0000 (21:01 +0530)]
ALSA: cs5535audio: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: korg1212: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:16 +0000 (21:01 +0530)]
ALSA: korg1212: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: cs46xx: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:15 +0000 (21:01 +0530)]
ALSA: cs46xx: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: ca0106: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:14 +0000 (21:01 +0530)]
ALSA: ca0106: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
6 years agoALSA: aw2: make snd_pcm_hardware const
Bhumika Goyal [Sat, 12 Aug 2017 15:31:13 +0000 (21:01 +0530)]
ALSA: aw2: make snd_pcm_hardware const

Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>