Tom Rini [Thu, 23 Jun 2022 15:27:04 +0000 (11:27 -0400)]
Merge branch '2022-06-23-important-fixes'
- Apple NVMe updates to support macOS 13 changes, kontron-sl-mx8mm dts
changes to fix some problems.
Frieder Schrempf [Tue, 14 Jun 2022 13:03:19 +0000 (15:03 +0200)]
imx: kontron-sl-mx8mm: Remove deprecated phy-mode property
This was previously needed, but U-Boot is now capable of parsing
the new "phy-connection-type" property that is already used in
the main devicetree.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Frieder Schrempf [Tue, 14 Jun 2022 13:03:18 +0000 (15:03 +0200)]
imx: kontron-sl-mx8mm: Sync dts files and fix ethernet
This syncs the devicetree files with the latest Linux kernel (5.19-rc2).
This also fixes the currently broken ethernet support:
Before:
Net: Could not get PHY for FEC0: addr 0
After:
Net: eth0: ethernet@
30be0000
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Janne Grunau [Tue, 14 Jun 2022 07:09:09 +0000 (09:09 +0200)]
arm: apple: Increase RTKit timeouts
Timeouts are not expected to happen and are handled as fatal errors.
Increase all timeouts to 1 second as defensive measure to avoid relying
on the timing behaviour of certain firmware versions or configurations.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
Janne Grunau [Tue, 14 Jun 2022 07:09:08 +0000 (09:09 +0200)]
MAINTAINERS: Add nvme_apple to Apple SoC section
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Janne Grunau [Tue, 14 Jun 2022 07:09:07 +0000 (09:09 +0200)]
arm: apple: nvme: Add SART support and RTKit buffer management
The NVMe firmware in the macOS 13 beta blocks or crashes with u-boot's
current minimal RTKit implementation. It does not provide buffers for
the firmware's buffer requests. The ANS2 firmware included in macOS 11
and 12 tolerates this. The firmware included in the first macOS 13 beta
requires buffers for the crashlog and ioreport endpoints to function.
In the case of the NVMe the buffers are physical memory. Access to
physical memory is guarded by what Apple calls SART.
Import m1n1's SART driver (exclusively used for the NVMe controller).
Implement buffer management helpers for RTKit. These are generic since
other devices (none in u-boot so far) require different handling.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
Tom Rini [Mon, 20 Jun 2022 18:30:36 +0000 (14:30 -0400)]
Prepare v2022.07-rc5
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 19 Jun 2022 15:30:29 +0000 (11:30 -0400)]
Merge tag 'efi-2022-07-rc5-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2020-07-rc5-2
Documentation:
* man-pages for booti and printenv
UEFI
* correct return value for printenv -e command
* initialize console size late
Heinrich Schuchardt [Tue, 14 Jun 2022 06:02:03 +0000 (08:02 +0200)]
efi_loader: initialize console size late
If CONFIG_VIDEO_DM=n we query the display size from the serial console.
Especially when using a remote console the response can be so late that
it interferes with autoboot.
Only query the console size when running an EFI binary.
Add debug output showing the determined console size.
Reported-by: Fabio Estevam <festevam@gmail.com>
Fixes:
a57ad20d07e8 ("efi_loader: split efi_init_obj_list() into two stages")
Fixes:
a9bf024b2933 ("efi_loader: disk: a helper function to create efi_disk objects from udevice")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Fabio Estevam <festevam@denx.de>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Heinrich Schuchardt [Sun, 19 Jun 2022 12:02:18 +0000 (14:02 +0200)]
test: work around for EFI terminal size probing
When the UEFI sub-system is initialized it sends an escape sequence to the
serial console to determine the terminal size. This stops the
run_command_list() function of the console emulation from recognizing the
U-Boot command line prompt.
Add a 'print -e' command as first command in the command list to work
around this issue.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 19 Jun 2022 11:36:48 +0000 (13:36 +0200)]
cmd: correct return value for printenv -e
If printenv -e is executed and the specified variable is not found, the
return value $? of the command should be 1 (false).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 19 Jun 2022 11:59:22 +0000 (13:59 +0200)]
doc: man-page for the printenv command
Privide a man-page for the printenv command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sat, 11 Jun 2022 06:23:31 +0000 (08:23 +0200)]
doc: man-page for bootz command
Provide a man-page for the bootz command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Fri, 17 Jun 2022 13:41:11 +0000 (09:41 -0400)]
Merge tag 'u-boot-stm32-
20220617' of https://source.denx.de/u-boot/custodians/u-boot-stm
- Fix the stm32prog command for stm32mp platform
- Add stm32mp15x DHCOR based DRC Compact board
Tom Rini [Fri, 17 Jun 2022 13:35:28 +0000 (09:35 -0400)]
Merge commit '
32e0379143b433e29d76404f5f4c279067e48853' of https://github.com/tienfong/uboot_mainline
Tom Rini [Fri, 17 Jun 2022 13:13:50 +0000 (09:13 -0400)]
Merge branch '2022-06-16-assorted-bugfixes'
- A wide array of regression fixes and minor updates
Dinesh Maniyam [Wed, 1 Jun 2022 10:49:02 +0000 (18:49 +0800)]
ddr: altera: soc64: Integer fix overflow that caused DDR size mismatched
Convert the constant integer to 'phys_size_t' to avoid overflow
when calculating the SDRAM size.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Wed, 1 Jun 2022 07:57:25 +0000 (15:57 +0800)]
drivers: cache: ncore: Disable snoop filter
There is hardware bug in NCORE CCU IP and it is causing an issue in the
coherent directory tracking of outstanding cache lines.
The workaround is disabling snoop filter.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Tue, 31 May 2022 08:15:17 +0000 (16:15 +0800)]
arm: dts: socfpga: stratix10: Add freeze controller node
The freeze controller is required for FPGA partial reconfig.
This node is disable on default.
Enable this node via u-boot fdt command when needed.
Signed-off-by: Yau Wai Gan <yau.wai.gan@intel.com>
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Tue, 31 May 2022 08:05:56 +0000 (16:05 +0800)]
arm: dts: socfpga: agilex: Add freeze controller node
The freeze controller is required for FPGA partial reconfig.
This node is disable on default.
Enable this node via u-boot fdt command when needed.
Signed-off-by: Yau Wai Gan <yau.wai.gan@intel.com>
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Wed, 1 Jun 2022 07:54:59 +0000 (15:54 +0800)]
arch: arm: socfpga: timer_s10: Override udelay for secure section
Override __udelay() as 'always inlined' function so that PSCI code
run in '__secure' section can call this delay function as well.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:21 +0000 (11:55 +0200)]
ARM: dts: stm32: Add DHCOR based DRC Compact board
Add DT for DH DRC Compact unit, which is a universal controller device.
The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD
card slot, eMMC and SDIO Wi-Fi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:20 +0000 (11:55 +0200)]
ARM: dts: stm32: Add alternate pinmux for SPI2 pins
Add another mux option for SPI2 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:19 +0000 (11:55 +0200)]
ARM: dts: stm32: Add alternate pinmux for CAN1 pins
Add another mux option for CAN1 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:18 +0000 (11:55 +0200)]
ARM: dts: stm32: Add alternate pinmux for UART5 pins
Add another mux option for UART5 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:17 +0000 (11:55 +0200)]
ARM: dts: stm32: Add alternate pinmux for UART4 pins
Add another mux option for UART4 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:16 +0000 (11:55 +0200)]
ARM: dts: stm32: Add alternate pinmux for UART3 pins
Add another mux option for UART3 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Thu, 16 Jun 2022 16:37:59 +0000 (18:37 +0200)]
stm32mp: stm32prog: fix the last character of dfu_alt_add third parameter
The third parameter of dfu_alt_add(), the string description of alternate,
is build in stm32prog_alt_add() with a unnecessary character ';' at the
end of the string.
This separator was required in the first implementation of
dfu_alt_add() but is no more needed in the current implementation;
this separator is managed only in dfu_config_interfaces() which call
dfu_alt_add() for this parameter without this separator.
And since the commit
53b406369e9d ("DFU: Check the number of arguments
and argument string strictly"), this added character cause an error when
the stm32prog command is executed because the third parameter of
dfu_alt_add() must be a string with a numerical value; 's' must be NULL
in the result of call in dfu_fill_entity_mmc():
third_arg = simple_strtoul(argv[2], &s, 0);
Fixes:
53b406369e9d ("DFU: Check the number of arguments and argument string strictly")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Marek Vasut [Sun, 1 May 2022 16:43:55 +0000 (18:43 +0200)]
net: Fix discuss discard typo
Replace discuss with discard, that is what happens with packet with
incorrect checksum. Fix the typo.
Fixes:
4b37fd146bb ("Convert CONFIG_UDP_CHECKSUM to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Peng Fan [Tue, 14 Jun 2022 10:42:07 +0000 (18:42 +0800)]
tools: binman: install btool
btool is needed after install binman to system.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Corentin LABBE [Tue, 14 Jun 2022 08:44:07 +0000 (08:44 +0000)]
board: ti: am335x: eth_cpsw should depend on CONFIG_NET
The origin of this patch is the breaking of am335x-hs boot
due to commit
e41651fffda7 ("dm: Support parent devices with of-platdata")
HS boards have less SRAM for SPL and so this commit increased memory usage beyond am335x limit.
This commit added 10 driver binding pass and am335x boot only if one pass is done.
SPL try to do more than one pass due to eth_cpsw failing.
Since HS SPL does not need network (and NET is already disabled in config),
the easiest fix is to "remove" eth_cpsw from SPL by testing if NET is enabled.
Signed-off-by: Corentin LABBE <clabbe@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
Andre Przywara [Mon, 13 Jun 2022 23:11:10 +0000 (00:11 +0100)]
armv8: always use current exception level for TCR_ELx access
Currently get_tcr() takes an "el" parameter, to select the proper
version of the TCR_ELx system register.
This is problematic in case of the Apple M1, since it runs with
HCR_EL2.E2H fixed to 1, so TCR_EL2 is actually using the TCR_EL1 layout,
and we get the wrong version.
For U-Boot's purposes the only sensible choice here is the current
exception level, and indeed most callers treat it like that, so let's
remove that parameter and read the current EL inside the function.
This allows us to check for the E2H bit, and pretend it's EL1 in this
case.
There are two callers which don't care about the EL, and they pass 0,
which looks wrong, but is irrelevant in these two cases, since we don't
use the return value there. So the change cannot affect those two.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
Heiko Thiery [Sat, 11 Jun 2022 06:09:04 +0000 (08:09 +0200)]
arm64: dts: imx8mq-kontron-pitx-imx8m-u-boot.dtsi: disable assigned clocks
With the move to use DM_CLK the boards uart stops working. The used
properties are not supported by the imx8mq clock driver. Thus
the correct baudrate cannot be selected. Remove this properties here and
the board can start with working uart. Keep it in the main dts because
linux handles these porperties fine.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Andre Przywara [Tue, 7 Jun 2022 23:42:22 +0000 (00:42 +0100)]
usb: host: ehci-generic: Make resets and clocks optional
The generic EHCI binding does not *require* resets and clocks
properties, and indeed for instance the Allwinner A20 SoCs does not
need or define any resets in its DT.
Don't easily give up if clk_get_bulk() or reset_get_bulk() return an
error, but check if that is due to the DT simply having no entries for
either of them.
This fixes USB operation on all boards with an Allwinner A10 or A20 SoC,
which were reporting an error after commit
ba96176ab70e2999:
=======================
Bus usb@1c14000: ehci_generic usb@1c14000: Failed to get resets (err=-2)
probe failed, error -2
=======================
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Miquel Raynal [Thu, 9 Jun 2022 14:02:06 +0000 (16:02 +0200)]
fs/squashfs: sqfs_read: Prevent arbitrary code execution
Following Jincheng's report, an out-of-band write leading to arbitrary
code execution is possible because on one side the squashfs logic
accepts directory names up to 65535 bytes (u16), while U-Boot fs logic
accepts directory names up to 255 bytes long.
Prevent such an exploit from happening by capping directory name sizes
to 255. Use a define for this purpose so that developers can link the
limitation to its source and eventually kill it some day by dynamically
allocating this array (if ever desired).
Link: https://lore.kernel.org/all/CALO=DHFB+yBoXxVr5KcsK0iFdg+e7ywko4-e+72kjbcS8JBfPw@mail.gmail.com
Reported-by: Jincheng Wang <jc.w4ng@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Jincheng Wang <jc.w4ng@gmail.com>
Tom Rini [Wed, 8 Jun 2022 18:30:14 +0000 (14:30 -0400)]
odroid_xu3: Fix board environment variable
When migrating CONFIG_CONS_INDEX to Kconfig, on this platform we changed
what "board" evaluated to in the environment. This in turn meant that
we would no longer try and find the correct fdtfile via the normal
distro boot logic. Fix this by overriding board in the default
environment, as done on other platforms where CONFIG_SYS_BOARD is not
what we want to be in the board environment variable.
Fixes:
f76750d11133 ("Convert CONFIG_CONS_INDEX et al to Kconfig")
Reported-by: Gabriel Hojda <ghojda@yo2urs.ro>
Tested-by: Gabriel Hojda <ghojda@yo2urs.ro>
Signed-off-by: Tom Rini <trini@konsulko.com>
Andrey Zhizhikin [Tue, 7 Jun 2022 08:13:00 +0000 (10:13 +0200)]
.gitignore: add files produced by b4
b4 utility [1] is introduced by Linux Kernel developers and used to
fetch patches and patch series from lore.kernel.org and is proven
to be useful for U-Boot development. Detailed usage of the tool can be
read under post from the original author [2].
This tool fetches files from the list and populates the source folder
with additional files (*.cover and *.mbx) which are not ignored by git
and shown as newly added files.
Add those file patterns into .gitignore file, so they can be safely
skipped during changes attestation.
Link: [1]: https://pypi.org/project/b4/
Link: [2]: https://people.kernel.org/monsieuricon/introducing-b4-and-patch-attestation
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Christian Gmeiner [Thu, 12 May 2022 06:21:01 +0000 (08:21 +0200)]
arch: arm: mach-k3: am642_init: bring back MCU_PADCFG_MMR1 unlock
Without this register unlock it is not possible to configure the
pinmux used for mcu spi0.
Fixes:
92e46092f2 ("arch: arm: mach-k3: am642_init: Probe ESM nodes")
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Christophe Leroy [Thu, 12 May 2022 14:21:53 +0000 (16:21 +0200)]
Update email address and company name
This patch updates my email address and company name.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Stefan Roese [Fri, 29 Apr 2022 13:34:44 +0000 (15:34 +0200)]
crypto: fsl_hash: Remove unnecessary alignment check in caam_hash()
While working on an LX2160 based board and updating to latest mainline
I noticed problems using the HW accelerated hash functions on this
platform, when trying to boot a FIT Kernel image. Here the resulting
error message:
Using 'conf-freescale_lx2160a.dtb' configuration
Trying 'kernel-1' kernel subimage
Verifying Hash Integrity ... sha256Error: Address arguments are not aligned
CAAM was not setup properly or it is faulty
error!
Bad hash value for 'hash-1' hash node in 'kernel-1' image node
Bad Data Hash
ERROR: can't get kernel image!
Testing and checking with Gaurav Jain from NXP has revealed, that this
alignment check is not necessary here at all. So let's remove this
check completely.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Gaurav Jain <gaurav.jain@nxp.com>
Cc: dullfire@yahoo.com
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Tom Rini [Thu, 16 Jun 2022 12:38:46 +0000 (08:38 -0400)]
Merge tag 'u-boot-imx-
20220616' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-
20220616
-------------------
Fixes for 2022.07 + Toradex apalis-imx8 (missed in last PR)
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12322
Marek Vasut [Mon, 20 Dec 2021 21:57:57 +0000 (22:57 +0100)]
arm: socfpga: vining: Unmount UBIFS and detach UBI in ubi_load script
Clean up in ubiload script. Unmount UBIFS from which kernel image was
loaded and detach UBI on which the UBIFS is located, otherwise message
similar to the following is printed just before booting kernel:
Removing MTD device #7 (rootfs) with use count 1
Error when deleting partition "rootfs" (-16)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tien Fong Chee [Wed, 27 Apr 2022 04:52:42 +0000 (12:52 +0800)]
ddr: altera: Stratix10: Use phys_size_t for memory size
Replace with phys_size_t for all memory size variables declaration
for the sake of scalability. phys_size_t is defined in
/arch/arm/include/asm/types.h.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tien Fong Chee [Wed, 27 Apr 2022 04:27:21 +0000 (12:27 +0800)]
ddr: altera: Ignore bit[7-4] for both seq2core & core2seq handshake in HPS
Bit[7-4] for both register seq2core and core2seq handshake in HPS are not
required for triggering DDR re-calibration or resetting EMIF. So, ignoring
these bits just for playing it safe.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Yau Wai Gan [Tue, 24 May 2022 07:02:28 +0000 (15:02 +0800)]
arm: dts: socfpga: stratix10: Update MMC smplsel value
This new MMC sample select value is obtained from running
tests on multiple Stratix 10 boards and proven working.
Signed-off-by: Yau Wai Gan <yau.wai.gan@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tom Rini [Thu, 16 Jun 2022 03:11:30 +0000 (23:11 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-pmic
Tom Rini [Thu, 16 Jun 2022 03:10:17 +0000 (23:10 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-mmc
Tien Fong Chee [Fri, 10 Jun 2022 11:18:00 +0000 (19:18 +0800)]
intel: n5x: ddr: update license
All the source code of sdram_n5x.c are from Intel, update the license to
use both GPL2.0 and BSD-3 Clause because this copy of code may used for
open source and internal project.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Marek Vasut [Mon, 13 Jun 2022 12:35:25 +0000 (14:35 +0200)]
spi: nxp_fspi: Fix clock imbalance
The nxp_fspi_default_setup() is only ever called from nxp_fspi_probe(),
where the IP clock are initially disabled. Drop the second disabling of
clock to prevent clock enable/disable imbalance reported by clock core:
"
clk qspi_root_clk already disabled
"
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Loic Poulain [Thu, 26 May 2022 14:37:22 +0000 (16:37 +0200)]
mmc: fsl_esdhc_imx: Implement wait_dat0 mmc ops
Implement wait_dat0 mmc ops callbac, allowing to reduce SPL boot time.
Before (using grabserial):
[0.000001 0.000001] U-Boot SPL 2021.04-xxxx
[0.028257 0.028257] DDRINFO: start DRAM init
[0.028500 0.000243] DDRINFO: DRAM rate 3000MTS
[0.304627 0.276127] DDRINFO:ddrphy calibration done
[0.305647 0.001020] DDRINFO: ddrmix config done
[0.352584 0.046937] SEC0: RNG instantiated
[0.374299 0.021715] Normal Boot
[0.374675 0.000376] Trying to boot from MMC2
[1.250580 0.875905] NOTICE: BL31: v2.4(release):lf-5.10.72-2.2.0-0-g5782363f9
[1.251985 0.001405] NOTICE: BL31: Built : 08:02:40, Apr 12 2022
[1.522560 0.270575]
[1.522734 0.000174]
[1.522788 0.000054] U-Boot 2021.04-xxxx
After:
[0.000001 0.000001] U-Boot SPL 2021.04-xxxx
[0.001614 0.001614] DDRINFO: start DRAM init
[0.002377 0.000763] DDRINFO: DRAM rate 3000MTS
[0.278494 0.276117] DDRINFO:ddrphy calibration done
[0.279266 0.000772] DDRINFO: ddrmix config done
[0.338432 0.059166] SEC0: RNG instantiated
[0.339051 0.000619] Normal Boot
[0.339431 0.000380] Trying to boot from MMC2
[0.412587 0.073156] NOTICE: BL31: v2.4(release):lf-5.15.5-1.0.0-0-g05f788b
[0.414191 0.001604] NOTICE: BL31: Built : 10:35:26, Apr 6 2022
[0.700685 0.286494]
[0.700793 0.000108]
[0.700845 0.000052] U-Boot 2021.04-xxxx
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Loic Poulain [Thu, 26 May 2022 14:37:21 +0000 (16:37 +0200)]
mmc: Add support for wait_dat0 callback
There is no wait_dat0 mmc ops, causing operations waiting for data
line state change (e.g mmc_switch_voltage) to fallback to a 250ms
active delay. mmc_ops still used when DM_MMC is not enabled, which
is often the case for SPL. The result can be unexpectly long SPL
boot time.
This change adds support for wait_dat0() mmc operation.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Patrick Delaunay [Tue, 15 Feb 2022 15:23:23 +0000 (16:23 +0100)]
env: mmc : align erase address and size on erase_grp_size
On eMMC device, the erase_grp_size > 1 so the address and size for the
erase block command in env/mmc.c can be unaligned on erase group size and
some strange trace occurs and the result is not guarantee by MMC devices.
The SD-Card behavior doesn't change as erase_grp_size = 1 for SD-Card.
For example, on eMMC present on STM32MP15C-EV1 and before the patch:
STM32MP> env erase
Erasing Environment on MMC...
Caution! Your devices Erase group is 0x400
The erase range would be change to 0x2000~0x27ff
16 blocks erased: OK
Caution! Your devices Erase group is 0x400
The erase range would be change to 0x2000~0x23ff
16 blocks erased: OK
OK
After this patch:
STM32MP> env erase
Erasing Environment on MMC...
1024 blocks erased at 0x2000: OK
1024 blocks erased at 0x2000: OK
OK
Here the 2 copies of U-Boot environment are in the same devices Erase
group: it is erased twice.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Tue, 15 Feb 2022 15:23:22 +0000 (16:23 +0100)]
mmc: fix error message for unaligned erase request
Fix the end address in the message for unaligned erase request in
mmc_berase() when start + blkcnt is aligned to erase_grp_size.
for example:
- start = 0x2000 - 26
- count = 26
- erase_grp_size = 0x400
Caution! Your devices Erase group is 0x400
The erase range would be change to 0x2000~0x27ff
But no issue when the end address is not aligned, for example
- start = 0x2000 - 2 * 26
- count = 26
- erase_grp_size = 0x400
Caution! Your devices Erase group is 0x400
The erase range would be change to 0x2000~0x23ff
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Gaurav Jain [Thu, 9 Jun 2022 11:02:15 +0000 (16:32 +0530)]
secure boot: enable ARCH_MISC_INIT config.
add ARCH_MISC_INIT to initilaize caam jr driver.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Andrey Zhizhikin [Fri, 3 Jun 2022 15:15:22 +0000 (17:15 +0200)]
clk: imx8mp: use usb_core_ref for usb_root_clk
Upstream commit
7a2c3be95a50 ("clk: imx8mp: Fill in DWC3 USB, USB PHY,
HSIOMIX clock") added usb_core_ref for USB Controller but never set it
to be used as a clock source, using rather "osc_32k" instead.
This produces following boot log message:
"clk_register: failed to get osc_32k device (parent of usb_root_clk)"
Fix the USB controller clock source by using usb_core_ref instead of
osc_32k.
Fixes:
7a2c3be95a50 ("clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Andrey Zhizhikin [Fri, 3 Jun 2022 15:15:21 +0000 (17:15 +0200)]
clk: imx8mp: fix root clock names for ecspi
Root clock name contained underscore, which does not match to the actual
clock name.
Correct the name to match what is present in the FDT.
Fixes:
87f958810fcb ("clk: imx8mp: Add ECSPI clocks")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Philippe Schenker [Wed, 25 May 2022 07:55:02 +0000 (09:55 +0200)]
verdin-imx8mm, verdin-imx8mp: Fix default systemd console output
systemd prints its messages on the last console= statement that it finds
in the kernel arguments. The current ordering sends the systemd messages
to tty1, by default this is the display.
Ensure that systemd sends its messages to the default UART, reorder the
console= statements accordingly.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Josua Mayer [Thu, 19 May 2022 09:32:00 +0000 (12:32 +0300)]
mx6cuboxi: enable driver for adin1300 phy
Since SoMs revision 1.9 the ar8035 phy has been replaced by adin1300.
Enable the driver so that the new SoMs have functional networking.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Josua Mayer [Thu, 19 May 2022 09:31:59 +0000 (12:31 +0300)]
mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS
SoM revision 1.9 has replaced the ar8035 phy address 0 with an adin1300
at address 1. Because early SoMs had a hardware flaw, the ar8035 can
also appear at address 4 - making it a total of 3 phy nodes in the DTB.
To avoid confusing Linux with probe errors, fixup the dtb to only enable
the phy node that is detected at runtime.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Josua Mayer [Thu, 19 May 2022 09:31:58 +0000 (12:31 +0300)]
ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses
The Cubox has an unstable phy address - which can appear at either
address 0 (intended) or 4 (unintended).
SoM revision 1.9 has replaced the ar8035 phy with an adin1300, which
will always appear at address 1.
Change the reg property of the phy node to the magic value 0xffffffff,
which indicates to the generic phy driver that all addresses should be
probed. That allows the same node (which is pinned by phy-handle) to match
either the AR8035 PHY at both possible addresses, as well as the new one
at address 1.
Also add the new adi,phy-output-clock property for enabling the 125MHz
clock used by the fec ethernet controller, as submitted to Linux [1].
Linux solves this problem differently:
For the ar8035 phy it will probe both phy nodes in device-tree in order,
and use the one that succeeds. For the new adin1300 it expects U-Boot to
patch the status field in the DTB before booting
While at it also sync the reset-delay with the upstream Linux dtb.
[1] https://patchwork.kernel.org/project/netdevbpf/patch/
20220428082848.12191-4-josua@solid-run.com/
Signed-off-by: Josua Mayer <josua@solid-run.com>
Josua Mayer [Thu, 19 May 2022 09:31:57 +0000 (12:31 +0300)]
phy: adin: add support for clock output
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add support for selecting the clock via device-tree properties.
This patch is based on the Linux implementation for this feature,
which has been added to netdev/net-next.git [1].
[2] https://patchwork.kernel.org/project/netdevbpf/cover/
20220517085143.3749-1-josua@solid-run.com/
Signed-off-by: Josua Mayer <josua@solid-run.com>
Nate Drude [Thu, 19 May 2022 09:31:56 +0000 (12:31 +0300)]
phy: adin: fix broken support for adi, phy-mode-override
Currently, the adin driver fails to compile.
The original patch introducing the adin driver used the function
phy_get_interface_by_name to support the adi,phy-mode-override
property. Unfortunately, a few days before the adin patch
was accepted, another patch removed support for phy_get_interface_by_name:
https://github.com/u-boot/u-boot/commit/
123ca114e07ecf28aa2538748d733e2b22d8b8b5
This patch refactors adin_get_phy_mode_override, implementing the logic in
the new function, ofnode_read_phy_mode, from the patch above.
Signed-off-by: Nate Drude <nate.d@variscite.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Fabio Estevam [Tue, 17 May 2022 16:23:09 +0000 (13:23 -0300)]
imx8mn_evk: Add Ethernet support to the LPDDR4 variant
The imx8mn-ddr4-evk board has Ethernet support already, but the
lpddr4 board does not.
Add Ethernet support for the LPDDR4 variant too.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Philippe Schenker [Mon, 9 May 2022 16:58:16 +0000 (18:58 +0200)]
board: apalis-imx8: add new 8gb product variant
Add the new Apalis iMX8 product variant
0067: Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT
the only difference to the product
0037 Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT
is the 8gb of RAM. Toradex strategy to choose the correct RAM timing in
SCFW is by fuses in the user area telling which RAM timing to load.
This commit makes use of this information to set the correct size of
the RAM and therefore distinguish between the new 0067 and 0037 product
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Philippe Schenker [Mon, 9 May 2022 16:58:15 +0000 (18:58 +0200)]
toradex: tdx-cfg-block: add new 8gb apalis-imx8
0067: Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT
This module is identical to its 4GB counterpart
0037: Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT
except for the RAM size.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fabio Estevam [Tue, 3 May 2022 19:03:04 +0000 (16:03 -0300)]
imx8mn_evk: Add the missing spl.bin entry
The generated flash.bin does not boot the imx8mn evk LPDDR4 variant
as it misses the spl.bin description in binman.
Add its entry to fix the boot on the imx8mn evk LPDDR4 variant.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Tested-by: Arti Zirk <art@zirk.me>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Tom Rini [Tue, 14 Jun 2022 17:59:23 +0000 (13:59 -0400)]
dtoc: Update test_src_scan.py for new tegra compatibles
This test was written to match up with the list of compatibles in
drivers/i2c/tegra_i2c.c so adding another one requires the test to be
updated to match.
Fixes:
0d2105ae5e32 ("arm: tegra: Update some DT compatibles")
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 14 Jun 2022 16:28:58 +0000 (12:28 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegra
Signed-off-by: Tom Rini <trini@konsulko.com>
Rasmus Villemoes [Tue, 3 May 2022 08:58:06 +0000 (10:58 +0200)]
pmic: pca9450: add DM_I2C dependencies in Kconfig
The pca9450 driver uses dm_i2c_{read,write}, which
are (unsurprisingly) only available with DM_I2C. Make sure one can't
create an unbuildable .config by adding proper dependencies.
While here, append "in SPL" to the prompt for the SPL_ variant so it
doesn't read the same as the one for the non-SPL_ variant.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Marcel Ziswiler [Sat, 21 May 2022 10:42:46 +0000 (12:42 +0200)]
board: apalis_t30/tk1/colibri_t20/t30: integrate mac address via dt
Use device tree to set MAC address of the Ethernet chip.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Peter Robinson [Tue, 3 May 2022 08:32:54 +0000 (09:32 +0100)]
arm: tegra: Update some DT compatibles
Some of the DT compatibles have changed upstream so add new DT compatibles
to ensure things continue to keep working if the device trees are
updated.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Peter Robinson [Tue, 3 May 2022 08:29:22 +0000 (09:29 +0100)]
pci: tegra: Update error prints with new lines
Add new lines to make errorr messages easier to read.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Peter Robinson [Tue, 3 May 2022 08:29:21 +0000 (09:29 +0100)]
ARM: tegra: XUSB padctl: Add new lines for errors
Add new lines for error messages to make them easier to read.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tom Rini [Mon, 13 Jun 2022 13:33:37 +0000 (09:33 -0400)]
Merge tag 'efi-2022-07-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-07-rc5
UEFI:
* Ignore OsIndications if CONFIG_EFI_IGNORE_OSINDICATIONS=y
* Correct UEFI default binary name
* Let efidebug create boot options without file path
* Support booting with a boot option with shortened device only device path
Heinrich Schuchardt [Sat, 11 Jun 2022 05:22:08 +0000 (05:22 +0000)]
efi_loader: create boot options without file path
Allow the efidebug command to create boot options without file path, e.g.
efidebug boot add -b 0001 'short dev only' host 0:1 ''
efidebug boot add -B 0002 'long dev only' host 0:1 ''
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 11 Jun 2022 05:22:07 +0000 (05:22 +0000)]
efi_loader: allow booting from short dev only DP
Allow booting from a short form device-path without file path, e.g.
/HD(1,GPT,
5ef79931-a1aa-4c70-9d67-
611e8f69eafd,0x800,0x1000)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Fri, 10 Jun 2022 16:24:48 +0000 (18:24 +0200)]
efi_loader: correctly identify binary name
Only on the sandbox the default EFI binary name (e.g. BOOTX64.EFI) must
match the host architecture.
In all other cases we must use the target architecture.
Use #elif where appropriate.
Reported-by: Vagrant Cascadian <vagrant@reproducible-builds.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Sughosh Ganu [Wed, 1 Jun 2022 18:00:41 +0000 (23:30 +0530)]
EFI: FMP: Use a common GetImageInfo function for FIT and raw images
The GetImageInfo function definitions for the FIT images and raw
images are the same. Use a common function for the both the Firmware
Management Protocol(FMP) instances for raw and FIT images.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Sughosh Ganu [Wed, 1 Jun 2022 18:00:39 +0000 (23:30 +0530)]
EFI: Do not consider OsIndications variable if CONFIG_EFI_IGNORE_OSINDICATIONS is enabled
The EFI_IGNORE_OSINDICATIONS config symbol was introduced as a
mechanism to have capsule updates work even on platforms where the
SetVariable runtime service was not supported. The current logic
requires the OsIndications variable to have been set to a 64 bit value
even when the EFI_IGNORE_OSINDICATIONS config is enabled. Return an
error code on not being able to read the variable only when
EFI_IGNORE_OSINDICATIONS is not enabled.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Wed, 8 Jun 2022 12:25:30 +0000 (08:25 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-usb
- MediaTek XHCI bugfix, add USB251xB/xBi driver
Marek Vasut [Sun, 10 Apr 2022 04:27:14 +0000 (06:27 +0200)]
misc: Port USB251xB/xBi Hi-Speed Hub Controller Driver from Linux
This patch adds a driver for configuration of the Microchip USB251xB/xBi
USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus
configuration interface and two to four USB 2.0 downstream ports.
This is ported from Linux as of Linux kernel commit
5c2b9c61ae5d8 ("usb: usb251xb: add boost-up property support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 7 Jun 2022 12:17:24 +0000 (08:17 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-watchdog
- Fix SPL build with watchdog disabled in asm files (Pali)
Tom Rini [Tue, 7 Jun 2022 12:17:08 +0000 (08:17 -0400)]
Merge tag 'xilinx-for-v2022.07-rc4-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2022.07-rc4-v2
- Fix revision name (remove spaces)
Chunfeng Yun [Fri, 27 May 2022 01:52:09 +0000 (09:52 +0800)]
usb: xhci-mtk: disable all ports when disable host controller
This is used to avoid the ports status of IPPC being brought in kernel
stage, it may cause ports error especially when the xhci controller is
a component of dual-role controller.
Reported-by: Yun-Chien Yu <yun-chien.yu@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Pali Rohár [Thu, 28 Apr 2022 11:33:09 +0000 (13:33 +0200)]
watchdog: Fix SPL build with watchdog disabled in asm files
Allow to compile assembler files in SPL build which calls WATCHDOG_RESET
function when watchdog is disabled in SPL and enabled in U-Boot proper.
This issue was fixed in past by commit
7fbd42f5afc4 ("watchdog: Handle SPL
build with watchdog disabled") for C source files, but not for assembler
source files.
Currently the only assembler source file which calls WATCHDOG_RESET is
arch/powerpc/lib/ticks.S, so this patch affects and fixes powerpc SPL
builds.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Mon, 6 Jun 2022 14:25:13 +0000 (10:25 -0400)]
Prepare v2022.07-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
Camelia Groza [Thu, 2 Jun 2022 13:47:09 +0000 (16:47 +0300)]
configs: fsl: add missing SYS_FMAN_FW_ADDR defines
Two defconfigs were missed when transitioning the SYS_FMAN_FW_ADDR
symbol to Kconfig. CONFIG_SYS_FMAN_FW_ADDR is currently initialized to
0 by default on these builds, which prevents the firmware from loading.
Add the correct symbols to these defconfigs.
Fixes:
a97a071d10d2b ("configs: fsl: migrate FMAN/QE specific defines to Kconfig")
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Patrick Delaunay [Thu, 2 Jun 2022 16:34:49 +0000 (18:34 +0200)]
doc: update mail author for st-dt.rst
Update author email address with the one dedicated to
upstream activities.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Michal Simek [Mon, 6 Jun 2022 07:31:27 +0000 (09:31 +0200)]
xilinx: fru: Replace spaces with \0 in detected revision
Also fix board revision field where spaces are used instead of \0.
The same change was done for board name by commit
530560b6f8eb ("xilinx:
fru: Replace spaces with \0 in detected name").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e069e5134e57899e859786ad8ba48721df6df752.1653911444.git.michal.simek@amd.com
Tom Rini [Sat, 4 Jun 2022 13:38:56 +0000 (09:38 -0400)]
Merge tag 'efi-2022-07-rc4-4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-07-rc4-4
UEFI:
* Fix the implementation of the firmware management protocol
* Fix the unit tests for signed update capsules
Vincent Stehlé [Tue, 31 May 2022 07:55:34 +0000 (09:55 +0200)]
efi: test/py: authenticate fit capsules
Add support for the authentication of UEFI capsules containing FIT images.
The authentication code is moved out of the function handling raw images
into a new function efi_firmware_capsule_authenticate(). The special case
for the FMP header coming from edk2 tools is preserved. There is no
functional change for capsules containing raw images.
The python test for signed capsules with raw images is renamed with no
functional change and a new test is added for signed capsules containing
FIT images.
This can be tested with sandbox64_defconfig or sandbox_flattree_defconfig,
plus CONFIG_EFI_CAPSULE_AUTHENTICATE=y.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Vincent Stehlé [Tue, 31 May 2022 07:55:33 +0000 (09:55 +0200)]
test/py: efi_capsule: repair image authentication test
Repair the python tests for authenticated EFI capsules, which can be run
with sandbox_defconfig plus CONFIG_EFI_CAPSULE_AUTHENTICATE=y.
- Account for the reset changes done by commit
3e6f81000672 ("efi_loader:
test/py: Reset system after capsule update on disk").
- Fix the capsule GUID typo introduced by commit
2e9c3c6965ba ("test:
capsule: Modify the capsule tests to use GUID values for sandbox").
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Sughosh Ganu [Tue, 31 May 2022 07:15:35 +0000 (12:45 +0530)]
EFI: Update the documentation to reflect the correct value of OsIndications
The OsIndications is a 64 bit variable, and the current code expects
the value of the variable to be 64 bit. Update the documentation to
reflect this fact.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Sughosh Ganu [Tue, 31 May 2022 07:15:33 +0000 (12:45 +0530)]
EFI: Populate descriptor_count value only when image_info_size is not zero
The GetImageInfo function of the Firmware Mangement Protocol(FMP) gets
called initially to query the size of the image descriptor array that
would have to be allocated. During this call, the rest of the function
arguments, specifically pointers might be passed as NULL. Do not
populate the descriptor_count value before it is known that the call
to GetImageInfo has been made with the allocated buffer for the image
descriptors.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Chris Packham [Wed, 25 May 2022 01:08:51 +0000 (13:08 +1200)]
doc: environment: Fix typo
"valu" should be "value".
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Fri, 3 Jun 2022 19:42:13 +0000 (15:42 -0400)]
Merge branch '2022-06-03-assorted-fixes'
- armv8 TCR write bugfix, ubifs bugfix, imx8mq clk bugfixes, two network
fixes, Add U-Boot version to chosen node, update TI AM64x board
maintainers
Dave Gerlach [Fri, 3 Jun 2022 19:30:20 +0000 (14:30 -0500)]
board: ti: am64x: Update MAINTAINERS
Move maintainership of TI AM64x boards to Vignesh.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Pali Rohár [Wed, 6 Apr 2022 21:31:53 +0000 (23:31 +0200)]
squashfs: Fix compilation on big endian systems
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Peng Fan [Mon, 23 May 2022 11:38:28 +0000 (19:38 +0800)]
imx: imx8mq: select CONFIG_CMD_CLK
select CONFIG_CMD_CLK to enable dump clk in uboot shell
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 23 May 2022 11:38:27 +0000 (19:38 +0800)]
imx: imx8mq: default select CLK_IMX8MQ
Since the power domain driver default select CONFIG_CLK, so we will
meet lots failures without CLK_IMX8MQ, so default select it.
Fixes: commit
4eb82c2e56a7c ("imx: power-domain: Get rid of SMCCC dependency")
Signed-off-by: Peng Fan <peng.fan@nxp.com>