scsi: NCR5380: Have NCR5380_select() return a bool

[ Upstream commit dad8261e643849ea134c7cd5c8e794e31d93b9eb ]

The return value is taken to mean "retry" or "don't retry". Change it to bool
to improve readability. Fix related comments. No functional change.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Clear all unissued commands on host reset

[ Upstream commit 1aeeeed7f03c576f096eede7b0384f99a98f588c ]

When doing a host reset we should be clearing all outstanding commands, not
just the command triggering the reset.

[mkp: adjusted Hannes' SoB address]

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ondrey Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Allow TKIP for AP mode

[ Upstream commit 6f3df8c1192c873a6ad9a76328920f6f85af90a8 ]

Support for setting keys for TKIP cipher suite was mistakenly removed
for AP mode. Fix this.

Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: use correct FIFO length

[ Upstream commit 7126b6f2bbdf8e25f85e7ca6d91d49ea4ce9f6a6 ]

Current FIFO size calculation is wrong for two reasons:
- We access lmac 0 by default
- We don't take 11ax into consideration.
Fix both.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: fit reclaim msg to MAX_MSG_LEN

[ Upstream commit 81f0c66187e1ebb7b63529d82faf7ff1e0ef428a ]

Today, the length of a debug message in iwl_trans_pcie_reclaim
may pass the MAX_MSG_LEN, which is 110.
An example for this kind of message is:

'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2),
last_to_free 65535 is out of range [0-65536] 2 2.'

Cut the message a bit so it will fit the allowed MAX_MSG_LEN.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: gen2: build A-MSDU only for GSO

[ Upstream commit 53f474e6a8d74d5dc0c3a015d889471f9a157685 ]

If the incoming frame should be an A-MSDU, it may already be one,
for example in the case of NAN multicast being encapsulated in an
A-MSDU. Thus, use the GSO algorithm to build A-MSDU only if the
skb actually contains GSO data.

Fixes: 6ffe5de35b05 ("iwlwifi: pcie: add AMSDU to gen2")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: api: annotate compressed BA notif array sizes

[ Upstream commit 6f68cc367ab6578a33cca21b6056804165621f00 ]

Annotate the compressed BA notification array sizes and
make both of them 0-length since the length of 1 is just
confusing - it may be different than that and the offset
to the second one needs to be calculated in the C code
anyhow.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: read correct prph address for newer devices

[ Upstream commit 84fb372c892e231e9a2ffdaa5c2df52d94aa536c ]

For newer devices we have higher range of periphery
addresses. Currently it is masked out, so we end up
reading another address.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: fix non_shared_ant for 22000 devices

[ Upstream commit a40287727d9b737e183959fd31a4e0c55f312853 ]

The non-shared antenna was wrong for 22000 device series.
Fix it to ANT_B for correct antenna preference by coex in MVM driver.

Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support")
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: dbg: don't crash if the firmware crashes in the middle of a debug dump

[ Upstream commit 79f25b10c9da3dbc953e47033d0494e51580ac3b ]

We can dump data from the firmware either when it crashes,
or when the firmware is alive.
Not all the data is available if the firmware is running
(like the Tx / Rx FIFOs which are available only when the
firmware is halted), so we first check that the firmware
is alive to compute the required size for the dump and then
fill the buffer with the data.

When we allocate the buffer, we test the STATUS_FW_ERROR
bit to check if the firmware is alive or not. This bit
can be changed during the course of the dump since it is
modified in the interrupt handler.

We hit a case where we allocate the buffer while the
firmware is sill working, and while we start to fill the
buffer, the firmware crashes. Then we test STATUS_FW_ERROR
again and decide to fill the buffer with data like the
FIFOs even if no room was allocated for this data in the
buffer. This means that we overflow the buffer that was
allocated leading to memory corruption.

To fix this, test the STATUS_FW_ERROR bit only once and
rely on local variables to check if we should dump fifos
or other firmware components.

Fixes: 04fd2c28226f ("iwlwifi: mvm: add rxf and txf to dump data")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: fix a memory leak in rsa-kcs1pad's encryption mode

[ Upstream commit 3944f139d5592790b70bc64f197162e643a8512b ]

The encryption mode of pkcs1pad never uses out_sg and out_buf, so
there's no need to allocate the buffer, which presently is not even
being freed.

CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: linux-crypto@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: s5p-sss: Fix Fix argument list alignment

[ Upstream commit 6c12b6ba45490eeb820fdceccf5a53f42a26799c ]

Fix misalignment of continued argument list.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: s5p-sss: Fix race in error handling

[ Upstream commit 5842cd44786055231b233ed5ed98cdb63ffb7db3 ]

Remove a race condition introduced by error path in functions:
s5p_aes_interrupt and s5p_aes_crypt_start. Setting the busy field of
struct s5p_aes_dev to false made it possible for s5p_tasklet_cb to
change the req field, before s5p_aes_complete was called.

Change the first parameter of s5p_aes_complete to struct
ablkcipher_request. Before spin_unlock, make a copy of the currently
handled request, to ensure s5p_aes_complete function call with the
correct request.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hyperv: Suppress "PCI: Fatal: No config space access function found"

[ Upstream commit 2f285f46240d67060061d153786740d4df53cd78 ]

A Generation-2 Linux VM on Hyper-V doesn't have the legacy PCI bus, and
users always see the scary warning, which is actually harmless.

Suppress it.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org>
Cc: Olaf Aepfle <olaf@aepfle.de>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Marcelo Cerri <marcelo.cerri@canonical.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Link: https://lkml.kernel.org/r/
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btrsi: fix bt tx timeout issue

[ Upstream commit 7cbfd1e2aad410d96fa6162aeb3f9cff1fecfc58 ]

observed sometimes data is coming with unaligned address from kernel
BT stack. If unaligned address is passed, some data in payload is
stripped when packet is loading to firmware and this results, BT
connection timeout is happening.

sh# hciconfig hci0 up
Can't init device hci0: hci0 command 0x0c03 tx timeout

Fixed this by moving the data to aligned address.

Signed-off-by: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS

[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]

If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races

[ Upstream commit 7cf7846d27bfc9731e449857db3eec5e0e9701ba ]

Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: dell_rbu: Make payload memory uncachable

[ Upstream commit 6aecee6ad41cf97c0270f72da032c10eef025bf0 ]

The dell_rbu driver takes firmware update payloads and puts them in memory so
the system BIOS can find them after a reboot.  This sometimes fails (though
rarely), because the memory containing the payload is in the CPU cache but
never gets written back to main memory before the system is rebooted (CPU
cache contents are lost on reboot).

With this patch, the payload memory will be changed to uncachable to ensure
that the payload is actually in main memory before the system is rebooted.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: realview: Fix SPI controller node names

[ Upstream commit 016add12977bcc30f77d7e48fc9a3a024cb46645 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC: Raise the maximum number of memory controllers

[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]

We observe an oops in the skx_edac module during boot:

  EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
  EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  ...
  EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
  Too many memory controllers: 16
  EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0

We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).

[ bp: This is just a band-aid fix until we've sorted out the whole issue
  with the bus_type association and handling in EDAC and can get rid of
  this arbitrary limit. ]

Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Russ Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA: Fix dependencies for rdma_user_mmap_io

[ Upstream commit 46bdf777685677c1cc6b3da9220aace9da690731 ]

The mlx4 driver produces a link error when it is configured
as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m:

drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap':
main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io'

The same function is called from mlx5, which already has a
dependency to ensure we can call it, and from hns, which
appears to suffer from the same problem.

This adds the same dependency that mlx5 uses to the other two.

Fixes: 6745d356ab39 ("RDMA/hns: Use rdma_user_mmap_io")
Fixes: c282da4109e4 ("RDMA/mlx4: Use rdma_user_mmap_io")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: mark inode dirty explicitly in recover_inode()

[ Upstream commit 4a1728cad6340bfbe17bd17fd158b2165cd99508 ]

Mark inode dirty explicitly in the end of recover_inode() to make sure
that all recoverable fields can be persisted later.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to recover inode's project id during POR

[ Upstream commit f4474aa6e5e901ee4af21f39f1b9115aaaaec503 ]

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr -p 1 /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr -p /mnt/f2fs/file

    0 -----------------N- /mnt/f2fs/file

But actually, we expect the correct result is:

    1 -----------------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_projid field during mount,
fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: update i_size after DIO completion

[ Upstream commit 0a4daae5ffea39f5015334e4d18a6a80b447cae4 ]

This is related to
ee70daaba82d ("xfs: update i_size after unwritten conversion in dio completion")

If we update i_size during dio_write, dio_read can read out stale data, which
breaks xfstests/465.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ERR: Run error recovery callbacks for all affected devices

[ Upstream commit bfcb79fca19d267712e425af1dd48812c40dec0c ]

If an Endpoint reported an error with ERR_FATAL, we previously ran driver
error recovery callbacks only for the Endpoint's driver.  But if we reset a
Link to recover from the error, all downstream components are affected,
including the Endpoint, any multi-function peers, and children of those
peers.

Initiate the Link reset from the deepest Downstream Port that is
reliable, and call the error recovery callbacks for all its children.

If a Downstream Port (including a Root Port) reports an error, we assume
the Port itself is reliable and we need to reset its downstream Link.  In
all other cases (Switch Upstream Ports, Endpoints, Bridges, etc), we assume
the Link leading to the component needs to be reset, so we initiate the
reset at the parent Downstream Port.

This allows two other clean-ups.  First, we currently only use a Link
reset, which can only be initiated using a Downstream Port, so we can
remove checks for Endpoints.  Second, the Downstream Port where we initiate
the Link reset is reliable (unlike components downstream from it), so the
special cases for error detect and resume are no longer necessary.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: faraday: fix return type of ndo_start_xmit function

[ Upstream commit 0a715156656bddf4aa92d9868f850aeeb0465fd0 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: smsc: fix return type of ndo_start_xmit function

[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: paz00: fix wakeup gpio keycode

[ Upstream commit ebea2a43fdafdbce918bd7e200b709d6c33b9f3b ]

The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity

[ Upstream commit 503fcd8464fb6cd18073e97dec59b933930655d6 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: tegra: apalis_t30: fix mcp2515 can controller interrupt polarity

[ Upstream commit b38f6aa4b60a1fcc41f5c469981f8f62d6070ee3 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: tegra: apalis_t30: fix mmc1 cmd pull-up

[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]

Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: tegra20: restore address order

[ Upstream commit 8188391c127ea34d66f37eda6755d0acb51dc600 ]

Commit 6c468f109884 ("ARM: dts: tegra: add Tegra20 NAND flash
controller node") introduced the nand-controller node. However, it got
added at the wrong spot not honoring the address order. Fix this.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: tegra30: fix xcvr-setup-use-fuses

[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]

There was a dot instead of a comma. Fix this.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: I2C on Tegra194 is not compatible with Tegra114

[ Upstream commit d9fd22447ba59a9b53a202fade977e82bfba8d8d ]

Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string

[ Upstream commit 1c5f335f61ffb838fc3cc1cec9464067663eb8c8 ]

According to Documentation/devicetree/bindings/rtc/rtc-ds1307.txt the
original compatible "maxim,ds1341" is not a valid entry.

Switch to the documented "dallas,ds1341" compatible.

Reported-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: fsl: Fix I2C and SPI bus warnings

[ Upstream commit b739c177e1aeab532f355493439a1901b85be38c ]

dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.

arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: lantiq: Fix compile warning

[ Upstream commit 3a00dae006623d799266d85f28b5f76ef07d6b6c ]

This local variable is unused, remove it.

Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix remount problem of option io_bits

[ Upstream commit c6b1867b1da3b1203b4c49988afeebdcbdf65499 ]

Currently we show mount option "io_bits=%u" as "io_size=%uKB",
it will cause option parsing problem(unrecognized mount option)
in remount.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: always unregister the old device if going to discover new

[ Upstream commit 32c850bf587f993b2620b91e5af8a64a7813f504 ]

If we went into sas_rediscover_dev() the attached_sas_addr was already insured
not to be zero. So it's unnecessary to check if the attached_sas_addr is zero.

And although if the sas address is not changed, we always have to unregister
the old device when we are going to register a new one. We cannot just leave
the device there and bring up the new.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iw_cxgb4: Use proper enumerated type in c4iw_bar2_addrs

[ Upstream commit 1b571086e869395b6a11ab24186b0104fe05c057 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/cxgb4/qp.c:287:8: warning: implicit conversion
from enumeration type 'enum t4_bar2_qtype' to different enumeration type
'enum cxgb4_bar2_qtype' [-Wenum-conversion]
                                                 T4_BAR2_QTYPE_EGRESS,
                                                 ^~~~~~~~~~~~~~~~~~~~

c4iw_bar2_addrs expects a value from enum cxgb4_bar2_qtype so use the
corresponding values from that type so Clang is satisfied without changing
the meaning of the code.

T4_BAR2_QTYPE_EGRESS = CXGB4_BAR2_QTYPE_EGRESS = 0
T4_BAR2_QTYPE_INGRESS = CXGB4_BAR2_QTYPE_INGRESS = 1

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pci: Mask buggy SR-IOV VF INTx support

[ Upstream commit db04264fe9bc0f2b62e036629f9afb530324b693 ]

The SR-IOV spec requires that VFs must report zero for the INTx pin
register as VFs are precluded from INTx support.  It's much easier for
the host kernel to understand whether a device is a VF and therefore
whether a non-zero pin register value is bogus than it is to do the
same in userspace.  Override the INTx count for such devices and
virtualize the pin register to provide a consistent view of the device
to the user.

As this is clearly a spec violation, warn about it to support hardware
validation, but also provide a known whitelist as it doesn't do much
good to continue complaining if the hardware vendor doesn't plan to
fix it.

Known devices with this issue: 8086:270c

Tested-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pci: Fix potential memory leak in vfio_msi_cap_len

[ Upstream commit 30ea32ab1951c80c6113f300fce2c70cd12659e4 ]

Free allocated vdev->msi_perm in error path.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vmbus: keep pointer to ring buffer page

[ Upstream commit 52a42c2a90226dc61c99bbd0cb096deeb52c334b ]

Avoid going from struct page to virt address (and back) by just
keeping pointer to the allocated pages instead of virt address.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: genwqe: should return proper error value.

[ Upstream commit 02241995b004faa7d9ff628e97f24056190853f8 ]

The function should return -EFAULT when copy_from_user fails. Even
though the caller does not distinguish them. but we should keep backward
compatibility.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: kgdbts: Fix restrict error

[ Upstream commit fa0218ef733e6f247a1a3986e3eb12460064ac77 ]

kgdbts current fails when compiled with restrict:

drivers/misc/kgdbts.c: In function ‘configure_kgdbts’:
drivers/misc/kgdbts.c:1070:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict]
  strcpy(config, opt);
  ^~~~~~~~~~~~~~~~~~~

As the error says, config is being used in both the source and destination.
Refactor the code to avoid the extra copy and put the parsing closer to
the actual location.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

silmbus: ngd: register controller after power up.

[ Upstream commit 94fe5f2b45c4108885e4b71f6b181068632ec904 ]

Register slimbus controller only after finishing powerup sequnce so that we
do not endup in situation where core starts sending transactions before
the controller is ready.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

slimbus: ngd: return proper error code instead of zero

[ Upstream commit 9652e6aa62a1836494ebb8dbd402587c083b568c ]

It looks like there is a typo in probe return. Fix it.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

slimbus: ngd: register ngd driver only once.

[ Upstream commit 1830dad34c070161fda2ff1db77b39ffa78aa380 ]

Move ngd platform driver out of loop so that it registers only once.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: dynamic-replicator: Handle multiple connections

[ Upstream commit 30af4fb619e5126cb3152072e687b377fc9398d6 ]

When a replicator port is enabled, we block the traffic
on the other port and route all traffic to the new enabled
port. If there are two active trace sessions each targeting
the two different paths from the replicator, the second session
will disable the first session and route all the data to the
second path.
                    ETR
                 /
e.g, replicator
                 \
                    ETB

If CPU0 is operated in sysfs mode to ETR and CPU1 is operated
in perf mode to ETB, depending on the order in which the
replicator is enabled one device is blocked.

Ideally we need trace-id for the session to make the
right choice. That implies we need a trace-id allocation
logic for the coresight subsystem and use that to route
the traffic. The short term solution is to only manage
the "target port" and leave the other port untouched.
That leaves both the paths unaffected, except that some
unwanted traffic may be pushed to the paths (if the Trace-IDs
are not far enough), which is still fine and can be filtered
out while processing rather than silently blocking the data.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: tmc: Fix byte-address alignment for RRP

[ Upstream commit e7753f3937610633a540f2be81be87531f96ff04 ]

>From the comment in the code, it claims the requirement for byte-address
alignment for RRP register: 'for 32-bit, 64-bit and 128-bit wide trace
memory, the four LSBs must be 0s. For 256-bit wide trace memory, the
five LSBs must be 0s'.  This isn't consistent with the program, the
program sets five LSBs as zeros for 32/64/128-bit wide trace memory and
set six LSBs zeros for 256-bit wide trace memory.

After checking with the CoreSight Trace Memory Controller technical
reference manual (ARM DDI 0461B, section 3.3.4 RAM Read Pointer
Register), it proves the comment is right and the program does wrong
setting.

This patch fixes byte-address alignment for RRP by following correct
definition in the technical reference manual.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: etm4x: Configure EL2 exception level when kernel is running in HYP

[ Upstream commit b860801e3237ec4c74cf8de0be4816996757ae5c ]

For non-VHE systems host kernel runs at EL1 and jumps to EL2 whenever
hypervisor code should be executed. In this case ETM4x driver must
restrict configuration to EL1 when it setups kernel tracing.
However, there is no separate hypervisor privilege level when VHE
is enabled, the host kernel runs at EL2.

This patch fixes configuration of TRCACATRn register for VHE systems
so that ETM_EXLEVEL_NS_HYP bit is used instead of ETM_EXLEVEL_NS_OS
to on/off kernel tracing. At the same time, it moves common code
to new helper.

Signed-off-by: Tomasz Nowicki <tnowicki@caviumnetworks.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: tmc-etr: Handle driver mode specific ETR buffers

[ Upstream commit 96a7f644006ecc05eaaa1a5d09373d0ee63beb0a ]

Since the ETR could be driven either by SYSFS or by perf, it
becomes complicated how we deal with the buffers used for each
of these modes. The ETR driver cannot simply free the current
attached buffer without knowing the provider (i.e, sysfs vs perf).

To solve this issue, we provide:
1) the driver-mode specific etr buffer to be retained in the drvdata
2) the etr_buf for a session should be passed on when enabling the
   hardware, which will be stored in drvdata->etr_buf. This will be
   replaced (not free'd) as soon as the hardware is disabled, after
   necessary sync operation.

The advantages of this are :

1) The common code path doesn't need to worry about how to dispose
   an existing buffer, if it is about to start a new session with a
   different buffer, possibly in a different mode.
2) The driver mode can control its buffers and can get access to the
   saved session even when the hardware is operating in a different
   mode. (e.g, we can still access a trace buffer from a sysfs mode
   even if the etr is now used in perf mode, without disrupting the
   current session.)

Towards this, we introduce a sysfs specific data which will hold the
etr_buf used for sysfs mode of operation, controlled solely by the
sysfs mode handling code.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: perf: Disable trace path upon source error

[ Upstream commit 4f8ef21007531c3d7cb5b826e7b2c8999b65ecae ]

We enable the trace path, before activating the source.
If we fail to enable the source, we must disable the path
to make sure it is available for another session.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: perf: Fix per cpu path management

[ Upstream commit 5ecabe4a76e8cdb61fa3e24862d9ca240a1c4ddf ]

We create a coresight trace path for each online CPU when
we start the event. We rely on the number of online CPUs
and then go on to allocate an array matching the "number of
online CPUs" for holding the path and then uses normal
CPU id as the index to the array. This is problematic as
we could have some offline CPUs causing us to access beyond
the actual array size (e.g, on a dual SMP system, if CPU0 is
offline, CPU1 could be really accessing beyond the array).
The solution is to switch to per-cpu array for holding the path.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: Fix handling of sinks

[ Upstream commit c71369de02b285d9da526a526d8f2affc7b17c59 ]

The coresight components could be operated either in sysfs mode or in perf
mode. For some of the components, the mode of operation doesn't matter as
they simply relay the data to the next component in the trace path. But for
sinks, they need to be able to provide the trace data back to the user.
Thus we need to make sure that "mode" is handled appropriately. e.g,
the sysfs mode could have multiple sources driving the trace data, while
perf mode doesn't allow sharing the sink.

The coresight_enable_sink() however doesn't really allow this check to
trigger as it skips the "enable_sink" callback if the component is
already enabled, irrespective of the mode. This could cause mixing
of data from different modes or even same mode (in perf), if the
sources are different. Also, if we fail to enable the sink while
enabling a path (where sink is the first component enabled),
we could end up in disabling the components in the "entire"
path which were not enabled in this trial, causing disruptions
in the existing trace paths.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: Use ERR_CAST instead of ERR_PTR

[ Upstream commit bbd35ba6fab5419e58e96f35f1431f13bdc14f98 ]

Use ERR_CAT inlined function to replace the ERR_PTR(PTR_ERR). It
make the code more concise.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: Only halt video streaming endpoint in bulk mode

[ Upstream commit 8dbf9c7abefd5c1434a956d5c6b25e11183061a3 ]

When USB requests for video data fail to be submitted, the driver
signals a problem to the host by halting the video streaming endpoint.
This is only valid in bulk mode, as isochronous transfers have no
handshake phase and can't thus report a stall. The usb_ep_set_halt()
call returns an error when using isochronous endpoints, which we happily
ignore, but some UDCs complain in the kernel log. Fix this by only
trying to halt the endpoint in bulk mode.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: Factor out video USB request queueing

[ Upstream commit 9d1ff5dcb3cd3390b1e56f1c24ae42c72257c4a3 ]

USB requests for video data are queued from two different locations in
the driver, with the same code block occurring twice. Factor it out to a
function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point

[ Upstream commit 245f880c25dbd8927af0f33aa5d1404370013957 ]

Update VDD_SOC voltage to 1.25V for 900MHz operating point
according to datasheet Rev. 1.3, 08/2018, 25mV is added to
the minimum allowed values to cover power supply ripple.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: phy-twl4030-usb: fix denied runtime access

[ Upstream commit 6c7103aa026094a4ee2c2708ec6977a6dfc5331d ]

When runtime is not enabled, pm_runtime_get_sync() returns -EACCESS,
the counter will be incremented but the resume callback not called,
so enumeration and charging will not start properly.
To avoid that happen, disable irq on suspend and recheck on resume.

Practically this happens when the device is woken up from suspend by
plugging in usb.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs

[ Upstream commit 09938ea9d136243e8d1fed6d4d7a257764f28f6d ]

This patch fixes and issue that the vbus_ctrl is disabled by
rcar_gen3_init_from_a_peri_to_a_host(), so a usb host cannot
supply the vbus.

Note that this condition will exit when the otg irq happens
even if we don't apply this patch.

Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs

[ Upstream commit 26728df4b254ae06247726a9a6e64823e39ac504 ]

Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same
Broadcom SATA PHY that other SoCs are using, make it possible to select
that driver on these platforms.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_ws

[ Upstream commit 95590a6286c547b7287d01c55515fb96b904aa03 ]

of_find_device_by_node takes a reference to the struct device when it
finds a match via get_device. but it fails to put_device in
at91_pm_config_ws, for_each_matching_node_and_match will get and put
the node properly, there is no need to call the of_put_node. Therefore,
just call put_device instead of of_node_put in at91_pm_config_ws.

Fixes: d7484f5c6b3b ("ARM: at91: pm: configure wakeup sources for ULP1 mode")
Suggested-by: Claudiu Beznea <Claudiu.Beznea@microchip.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: Fix gpio_direction_* for single direction GPIOs

[ Upstream commit ae9847f48a4b4bff0335da20be63ac84d94eb54c ]

GPIOs with no programmable direction are not required to implement
direction_output nor direction_input.

If we try to set an output direction on an output-only GPIO or input
direction on an input-only GPIO simply return 0.

This allows this single direction GPIO to be used by libgpiod.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: aspeed: fix invalid clock parameters for very large divisors

[ Upstream commit 17ccba67109cd0631f206cf49e17986218b47854 ]

The function that computes clock parameters from divisors did not
respect the maximum size of the bitfields that the parameters were
written to. This fixes the bug.

This bug can be reproduced with (and this fix verified with) the test
at: https://kunit-review.googlesource.com/c/linux/+/1035/

Discovered-by-KUnit: https://kunit-review.googlesource.com/c/linux/+/1035/
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks

[ Upstream commit ff1e37c6809daab75f7b2dea1efe69330e8eb65b ]

The proper parent clock for audio subsystem for Exynos5420 and Exynos5800
SoCs is CLK_MAU_EPLL. This fixes following warning:

    clk: failed to reparent mout_audss to fout_epll: -22

Fixes: ed7d1307077e: ARM: dts: exynos: Enable HDMI audio support on Peach Pit
Fixes: bae0f445c1e7: ARM: dts: exynos: Enable HDMI audio support on Peach Pi
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: configfs: Sort frame intervals upon writing

[ Upstream commit 89969a842e72b1b653140a4bbddd927b242736d0 ]

There is an issue where the host is unable to tell the gadget what frame
rate it wants if the dwFrameIntervals in the interface descriptors are
not in ascending order. This means that when instantiating a uvc gadget
via configfs the user must make sure the dwFrameIntervals are in
ascending order.

Instead of silently failing the breaking of this rule, we sort the
dwFrameIntervals upon writing to configfs.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: configfs: Prevent format changes after linking header

[ Upstream commit cb2200f7af8341aaf0c6abd7ba37e4c667c41639 ]

While checks are in place to avoid attributes and children of a format
being manipulated after the format is linked into the streaming header,
the linked flag was never actually set, invalidating the protections.
Update the flag as appropriate in the header link calls.

Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: configfs: Drop leaked references to config items

[ Upstream commit 86f3daed59bceb4fa7981d85e89f63ebbae1d561 ]

Some of the .allow_link() and .drop_link() operations implementations
call config_group_find_item() and then leak the reference to the
returned item. Fix this by dropping those references where needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock

[ Upstream commit a2df0984e73fd9e1dad5fc3f1c307ec3de395e30 ]

It is good practice to make the setting of gpio-pinctrls explicitly in the
devicetree, and in this case even necessary.
Rockchip boards start with iomux settings set to gpio for most pins and
while the linux pinctrl driver also implicitly sets the gpio function if
a pin is requested as gpio that is not necessarily true for other drivers.

The issue in question stems from uboot, where the sdmmc_pwr pin is set
to function 1 (sdmmc-power) by the bootrom when reading the 1st-stage
loader. The regulator controlled by the pin is active-low though, so
when the dwmmc hw-block sets its enabled bit, it actually disables the
regulator. By changing the pin back to gpio we fix that behaviour.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: davinci: Fix implicit enum conversion warning

[ Upstream commit 4158757395b300b6eb308fc20b96d1d231484413 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/media/platform/davinci/vpbe_display.c:524:24: warning: implicit
conversion from enumeration type 'enum osd_v_exp_ratio' to different
enumeration type 'enum osd_h_exp_ratio' [-Wenum-conversion]
                        layer_info->h_exp = V_EXP_6_OVER_5;
                                          ~ ^~~~~~~~~~~~~~
1 warning generated.

This appears to be a copy and paste error judging from the couple of
lines directly above this statement and the way that height is handled
in the if block above this one.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: au0828: Fix incorrect error messages

[ Upstream commit f347596f2bf114a3af3d80201c6e6bef538d884f ]

Correcting red herring error messages.

Where appropriate, replaces au0282_dev_register with:
- au0828_analog_register
- au0828_dvb_register

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init()

[ Upstream commit 8d11eb847de7d89c2754988c944d51a4f63e219b ]

The driver may sleep in a interrupt handler.

The function call paths (from bottom to top) in Linux-4.16 are:

[FUNC] kzalloc(GFP_KERNEL)
drivers/media/pci/ivtv/ivtv-yuv.c, 938:
kzalloc in ivtv_yuv_init
drivers/media/pci/ivtv/ivtv-yuv.c, 960:
ivtv_yuv_init in ivtv_yuv_next_free
drivers/media/pci/ivtv/ivtv-yuv.c, 1126:
ivtv_yuv_next_free in ivtv_yuv_setup_stream_frame
drivers/media/pci/ivtv/ivtv-irq.c, 827:
ivtv_yuv_setup_stream_frame in ivtv_irq_dec_data_req
drivers/media/pci/ivtv/ivtv-irq.c, 1013:
ivtv_irq_dec_data_req in ivtv_irq_handler

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx: work around false-positive warning, again

[ Upstream commit 8d1a4817cce1b15b4909f0e324a4f5af5952da67 ]

A warning that I thought to be solved by a previous patch of mine
has resurfaced with gcc-8:

media/imx/imx-media-csi.c: In function 'csi_link_validate':
media/imx/imx-media-csi.c:1025:20: error: 'upstream_ep' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c:1026:24: error: 'upstream_ep.bus_type' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c:127:19: error: 'upstream_ep.bus.parallel.bus_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c: In function 'csi_enum_mbus_code':
media/imx/imx-media-csi.c:132:9: error: '*((void *)&upstream_ep+12)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c:132:48: error: 'upstream_ep.bus.parallel.bus_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I spent some more time digging in this time, and think I have a better
fix, bailing out of the function that either initializes or errors
out here, which simplifies the code enough for gcc to figure out
what is going on. The earlier partial workaround can be removed now,
as the new workaround is better.

Fixes: 890f27693f2a ("media: imx: work around false-positive warning")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: Make MLXSW_SP1_FWREV_MINOR a hard requirement

[ Upstream commit 12ba7e1045521ec9f251c93ae0a6735cc3f42337 ]

Up until now, mlxsw tolerated firmware versions that weren't exactly
matching the required version, if the branch number matched. That
allowed the users to test various firmware versions as long as they were
on the right branch.

On the other hand, it made it impossible for mlxsw to put a hard lower
bound on a version that fixes all problems known to date. If a user had
a somewhat older FW version installed, mlxsw would start up just fine,
possibly performing non-optimally as it would use features that trigger
problematic behavior.

Therefore tweak the check to accept any FW version that is:

- on the same branch as the preferred version, and
- the same as or newer than the preferred version.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Fix microSD in rk3399 sapphire board

[ Upstream commit 88a20edf76091ee7f1bb459b89d714d53f0f8940 ]

The microSD card slot in the Sapphire board is not working because of
several issues:
 1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V
 and has a GPIO-based enable control.
 2.- The vqmmc power supply can provide up to 3.3V, but it is capped in
 the DTS to just 3.0V because of the vmmc capability. This results in a
 conflict from the mmc driver requesting an unsupportable voltage range
 from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the
 range up to 3.3V. The hw should be able to stand this 0.3V tolerance.
 See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c.
 3.- The card detect signal is non-working. There is a known conflict
 with jtag, but the workaround in drivers/soc/rockchip/grf.c does not
 work. Adding the broken-cd attribute to the DTS fixes the issue.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: kexec: Relax memory restriction

[ Upstream commit a6da4d6fdf8bd512c98d3ac7f1d16bc4bb282919 ]

We can rely on the system kernel and the dump capture kernel themselves in
memory usage.

Being restrictive with 512MB limit may cause kexec tool failure on some
platforms.

Tested-by: Rachel Mozes <rachel.mozes@intel.com>
Reported-by: Rachel Mozes <rachel.mozes@intel.com>
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20568/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC: Correct DIMM capacity unit symbol

[ Upstream commit 6f6da136046294a1e8d2944336eb97412751f653 ]

The {i3200|i7core|sb|skx}_edac drivers show DIMM capacity using the
wrong unit symbol: 'Mb' - megabit. Fix them by replacing 'Mb' with
'MiB' - mebibyte.

[Tony: These are all "edac_dbg()" messages, so this won't break scripts
       that parse console logs.]

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180919003433.16475-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/CPU: Change query logic so CPUID is enabled before testing

[ Upstream commit 2893cc8ff892fa74972d8dc0e1d0dc65116daaa3 ]

Presently we check first if CPUID is enabled. If it is not already
enabled, then we next call identify_cpu_without_cpuid() and clear
X86_FEATURE_CPUID.

Unfortunately, identify_cpu_without_cpuid() is the function where CPUID
becomes _enabled_ on Cyrix 6x86/6x86L CPUs.

Reverse the calling sequence so that CPUID is first enabled, and then
check a second time to see if the feature has now been activated.

[ bp: Massage commit message and remove trailing whitespace. ]

Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180921212041.13096-3-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/CPU: Use correct macros for Cyrix calls

[ Upstream commit 03b099bdcdf7125d4a63dc9ddeefdd454e05123d ]

There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:

  setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);

This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:

  outb(CX86_CCR2, 0x22);
  inb(0x23);

From the comments:

 * When using the old macros a line like
 *   setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
 * gets expanded to:
 *  do {
 *    outb((CX86_CCR2), 0x22);
 *    outb((({
 *        outb((CX86_CCR2), 0x22);
 *        inb(0x23);
 *    }) | 0x88), 0x23);
 *  } while (0);

The new macros fix this problem, so use them instead.

Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jia Zhang <qianyue.zj@alibaba-inc.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180921212041.13096-2-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: freescale: fix return type of ndo_start_xmit function

[ Upstream commit 06983aa526c759ebdf43f202d8d0491d9494e2f4 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: micrel: fix return type of ndo_start_xmit function

[ Upstream commit 2b49117a5abee8478b0470cba46ac74f93b4a479 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider

[ Upstream commit b78ac6ecd1b6b46f8767cbafa95a7b0b51b87ad8 ]

Allow the configuration of the MDIO clock divider when the Device Tree
contains 'clock-frequency' property (similar to I2C and SPI buses).
Because the hardware may have lost its state during suspend/resume,
re-apply the MDIO clock divider upon resumption.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: fix compilation failure

[ Upstream commit 32c009798385ce21080beaa87a9b95faad3acd1e ]

following commit:
commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
added struct bpf_flow_keys which conflicts with the struct with
same name in sockex2_kern.c and sockex3_kern.c

similar to commit:
commit 534e0e52bc23 ("samples/bpf: fix a compilation failure")
we tried the rename it "flow_keys" but it also conflicted with struct
having same name in include/net/flow_dissector.h. Hence renaming the
struct to "flow_key_record". Also, this commit doesn't fix the
compilation error completely because the similar struct is present in
sockex3_kern.c. Hence renaming it in both files sockex3_user.c and
sockex3_kern.c

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ERR: Use slot reset if available

[ Upstream commit c4eed62a214330908eec11b0dc170d34fa50b412 ]

The secondary bus reset may have link side effects that a hotplug capable
port may incorrectly react to.  Use the slot specific reset for hotplug
ports, fixing the undesirable link down-up handling during error
recovering.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: fold in
https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com
for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/AER: Don't read upstream ports below fatal errors

[ Upstream commit 9d938ea53b265ed6df6cdd1715d971f0235fdbfc ]

The AER driver has never read the config space of an endpoint that reported
a fatal error because the link to that device is considered unreliable.

An ERR_FATAL from an upstream port almost certainly indicates an error on
its upstream link, so we can't expect to reliably read its config space for
the same reason.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/AER: Take reference on error devices

[ Upstream commit 60271ab044a53edb9dcbe76bebea2221c4ff04d9 ]

Error handling may be running in parallel with a hot removal.  Reference
count the device during AER handling so the device can not be freed while
AER wants to reference it.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnx2x: Ignore bandwidth attention in single function mode

[ Upstream commit 75a110a1783ef8324ffd763b24f4ac268253cbca ]

This is a workaround for FW bug -
MFW generates bandwidth attention in single function mode, which
is only expected to be generated in multi function mode.
This undesired attention in SF mode results in incorrect HW
configuration and resulting into Tx timeout.

Signed-off-by: Shahed Shaikh <Shahed.Shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Fix SPI controller node names

[ Upstream commit 1ba23b1df0bb6eec430408614c3a11280941e112 ]

SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the
name enables dtc SPI bus checks.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: clearfog: fix sdhci supply property name

[ Upstream commit e807f0298144c06740022a2f900d86b7f115595e ]

The vmmc phandle, like all power supply property names, must have the
'-supply' suffix.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: enable display on stm32mp157c-ev1 board

[ Upstream commit 67330599f93672bd351123c729e2591a460fd24c ]

Enable panel raydium RM68200, DSI bridge & display controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce-inject: Reset injection struct after injection

[ Upstream commit 7401a633c34adc7aefd3edfec60074cb0475a3e8 ]

Clear the MCE struct which is used for collecting the injection details
after injection.

Also, populate it with more details from the machine.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20180905081954.10391-1-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: marvell: Fix SPI and I2C bus warnings

[ Upstream commit cf680cc5251487b9a39919c3cda31a108af19cf8 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/dove-cubox.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-dove-db.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@14600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/orion5x-kuroboxpro.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lschl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lsgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: arm/crc32 - avoid warning when compiling with Clang

[ Upstream commit cd560235d8f9ddd94aa51e1c4dabdf3212b9b241 ]

The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to a warning when building the kernel with Clang:
  arch/arm/crypto/crc32-ce-glue.c:239:33: warning: variable
    'crc32_cpu_feature' is not needed and will not be emitted
    [-Wunneeded-internal-declaration]
  static const struct cpu_feature crc32_cpu_feature[] = {
                                  ^

Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf
("modules: mark __inittest/__exittest as __maybe_unused").

Fixes: 2a9faf8b7e43 ("crypto: arm/crc32 - enable module autoloading based on CPU feature bits")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufeature: avoid warning when compiling with clang

[ Upstream commit c785896b21dd8e156326ff660050b0074d3431df ]

The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to warnings when building the kernel with Clang:
  arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable
    'cpu_feature_match_AES' is not needed and will not be emitted
    [-Wunneeded-internal-declaration]
  module_cpu_feature_match(AES, aes_init);
  ^

Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf
("modules: mark __inittest/__exittest as __maybe_unused").

Fixes: 67bad2fdb754 ("cpu: add generic support for CPU feature based module autoloading")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: chacha20 - Fix chacha20_block() keystream alignment (again)

[ Upstream commit a5e9f557098e54af44ade5d501379be18435bfbf ]

In commit 9f480faec58c ("crypto: chacha20 - Fix keystream alignment for
chacha20_block()"), I had missed that chacha20_block() can be called
directly on the buffer passed to get_random_bytes(), which can have any
alignment.  So, while my commit didn't break anything, it didn't fully
solve the alignment problems.

Revert my solution and just update chacha20_block() to use
put_unaligned_le32(), so the output buffer need not be aligned.
This is simpler, and on many CPUs it's the same speed.

But, I kept the 'tmp' buffers in extract_crng_user() and
_get_random_bytes() 4-byte aligned, since that alignment is actually
needed for _crng_backtrack_protect() too.

Reported-by: Stephan Müller <smueller@chronox.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pic32: Use proper enum in dmaengine_prep_slave_rg

[ Upstream commit 8cfde7847d5ed0bb77bace41519572963e43cd17 ]

Clang warns when one enumerated type is converted implicitly to another:

drivers/spi/spi-pic32.c:323:8: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
                                          DMA_FROM_DEVICE,
                                          ^~~~~~~~~~~~~~~
drivers/spi/spi-pic32.c:333:8: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
                                          DMA_TO_DEVICE,
                                          ^~~~~~~~~~~~~
2 warnings generated.

Use the proper enums from dma_transfer_direction (DMA_FROM_DEVICE =
DMA_DEV_TO_MEM = 2, DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1) to satify Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/159
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ste: Fix SPI controller node names

[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ux500: Fix LCDA clock line muxing

[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ]

The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ux500: Correct SCU unit address

[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ]

The unit address of the Cortex-A9 SCU device node contains one zero too
many.  Remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>