ubsan: disable object-size sanitizer under GCC

GCC's -fsanitize=object-size (as part of CONFIG_UBSAN_MISC) greatly
increases stack utilization.  Do not allow this under GCC.

Link: https://lkml.kernel.org/r/20201203004437.389959-4-keescook@chromium.org
Link: https://lore.kernel.org/lkml/CAHk-=wjPasyJrDuwDnpHJS2TuQfExwe=px-SzLeN8GFMAQJPmQ@mail.gmail.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: George Popescu <georgepope@android.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubsan: move cc-option tests into Kconfig

Instead of doing if/endif blocks with cc-option calls in the UBSAN
Makefile, move all the tests into Kconfig and use the Makefile to collect
the results.

Link: https://lkml.kernel.org/r/20201203004437.389959-3-keescook@chromium.org
Link: https://lore.kernel.org/lkml/CAHk-=wjPasyJrDuwDnpHJS2TuQfExwe=px-SzLeN8GFMAQJPmQ@mail.gmail.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: George Popescu <georgepope@android.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubsan: remove redundant -Wno-maybe-uninitialized

Patch series "Clean up UBSAN Makefile", v2.

This series attempts to address the issues seen with UBSAN's object-size
sanitizer causing problems under GCC.  In the process, the Kconfig and
Makefile are refactored to do all the cc-option calls in the Kconfig.
Additionally start to detangle -Wno-maybe-uninitialized, disable
UBSAN_TRAP under COMPILE_TEST for wider build coverage, and expand the
libusan tests.

This patch (of 7):

In commit 78a5255ffb6a ("Stop the ad-hoc games with
-Wno-maybe-initialized") -Wmaybe-uninitialized was disabled globally, so
keeping the disabling logic here too doesn't make sense.

Link: https://lkml.kernel.org/r/20201203004437.389959-1-keescook@chromium.org
Link: https://lkml.kernel.org/r/20201203004437.389959-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: George Popescu <georgepope@android.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/resource.c: fix kernel-doc markups

Kernel-doc markups should use this format:
        identifier - description

While here, fix a kernel-doc tag that was using, instead,
a normal comment block.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/c5e38e1070f8dbe2f9607a10b44afe2875bd966c.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: "Jonathan Corbet" <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

blktrace: make relay callbacks const

Now that relay_open() accepts const callbacks, make relay callbacks
const.

Link: https://lkml.kernel.org/r/7ff5ce0b735901eb4f10e13da2704f1d8c4a2507.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ath9k: make relay callbacks const

Now that relay_open() accepts const callbacks, make relay callbacks
const.

Link: https://lkml.kernel.org/r/7db0286c428f3a478dd7544afef04a3b131f1aa0.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ath11k: make relay callbacks const

Now that relay_open() accepts const callbacks, make relay callbacks
const.

Link: https://lkml.kernel.org/r/44e3d65b71025c462948d0c554061dc7b40ab488.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ath10k: make relay callbacks const

Now that relay_open() accepts const callbacks, make relay callbacks const.

Link: https://lkml.kernel.org/r/85cabc6d4b0d0ca43d4e0fb94897ccd16e3b7930.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/i915: make relay callbacks const

Now that relay_open() accepts const callbacks, make relay callbacks const.

Link: https://lkml.kernel.org/r/534d089f413db98aa0b94773fa49d5275d0d3c25.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

relay: allow the use of const callback structs

None of the relay users require the use of mutable structs for callbacks,
however the relay code does.  Instead of assigning the default callback
for subbuf_start, add a wrapper to conditionally call the client callback
if available, and fall back to default behaviour otherwise.

This lets all relay users make their struct rchan_callbacks const data.

[jani.nikula@intel.com: cleanups, per Christoph]
Link: https://lkml.kernel.org/r/20201124115412.32402-1-jani.nikula@intel.com
Link: https://lkml.kernel.org/r/cc3ff292e4eb4fdc56bee3d690c7b8e39209cd37.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

relay: make create_buf_file and remove_buf_file callbacks mandatory

All clients provide create_buf_file and remove_buf_file callbacks, and
they're required for relay to make sense.  There is no point in them being
optional.

Also document whether each callback is mandatory/optional.

Link: https://lkml.kernel.org/r/88003c1527386b93036e286e7917f1e33aec84ac.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

relay: require non-NULL callbacks in relay_open()

There are no clients passing NULL callbacks, which makes sense as it
wouldn't even create a file.  Require non-NULL callbacks, and throw away
the handling for NULL callbacks.

Link: https://lkml.kernel.org/r/e40642f3b027d2bb6bc851ddb60e0a61ea51f5f8.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

relay: remove unused buf_mapped and buf_unmapped callbacks

Patch series "relay: cleanup and const callbacks", v2.

None of the relay users require the use of mutable structs for callbacks,
however the relay code does.  Instead of assigning default callbacks when
there is none, add callback wrappers to conditionally call the client
callbacks if available, and fall back to default behaviour (typically
no-op) otherwise.

This lets all relay users make their struct rchan_callbacks const data.

This series starts with a number of cleanups first based on Christoph's
feedback.

This patch (of 9):

No relay client uses the buf_mapped or buf_unmapped callbacks.  Remove
them.  This makes relay's vm_operations_struct close callback a dummy,
remove it as well.

Link: https://lkml.kernel.org/r/cover.1606153547.git.jani.nikula@intel.com
Link: https://lkml.kernel.org/r/c69fff6e0cd485563604240bbfcc028434983bec.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bfs: don't use WARNING: string when it's just info.

Make the printk() [bfs "printf" macro] seem less severe by changing
"WARNING:" to "NOTE:".

<asm-generic/bug.h> warns us about using WARNING or BUG in a format string
other than in WARN() or BUG() family macros.  bfs/inode.c is doing just
that in a normal printk() call, so change the "WARNING" string to be
"NOTE".

Link: https://lkml.kernel.org/r/20201203212634.17278-1-rdunlap@infradead.org
Reported-by: syzbot+3fd34060f26e766536ff@syzkaller.appspotmail.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcov: fix kernel-doc markup issue

Fix the following kernel-doc issue in gcov:

  kernel/gcov/gcc_4_7.c:238: warning: Function parameter or member 'dst' not described in 'gcov_info_add'
  kernel/gcov/gcc_4_7.c:238: warning: Function parameter or member 'src' not described in 'gcov_info_add'
  kernel/gcov/gcc_4_7.c:238: warning: Excess function parameter 'dest' description in 'gcov_info_add'
  kernel/gcov/gcc_4_7.c:238: warning: Excess function parameter 'source' description in 'gcov_info_add'

Link: https://lkml.kernel.org/r/1605252352-63983-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcov: remove support for GCC < 4.9

Since commit 0bddd227f3dc ("Documentation: update for gcc 4.9
requirement") the minimum supported version of GCC is gcc-4.9.  It's now
safe to remove this code.

Similar to commit 10415533a906 ("gcov: Remove old GCC 3.4 support") but
that was for GCC 4.8 and this is for GCC 4.9.

Link: https://github.com/ClangBuiltLinux/linux/issues/427
Link: https://lkml.kernel.org/r/20201111030557.2015680-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio: remove unused rio_get_asm() and rio_get_device()

The functions rio_get_asm() and rio_get_device() are globally exported
but have almost no users in tree. The only user is rio_init_mports()
which invokes it via rio_init().

rio_init() iterates over every registered device and invokes
rio_fixup_device().  It looks like a fixup function which should perform a
"change" to the device but does nothing.  It has been like this since its
introduction in commit 394b701ce4fbf ("[PATCH] RapidIO support: core
base") which was merged into v2.6.15-rc1.

Remove rio_init() because the performed fixup function
(rio_fixup_device()) does nothing.  Remove rio_get_asm() and
rio_get_device() which have no callers now.

Link: https://lkml.kernel.org/r/20201116170004.420143-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kdump: append uts_namespace.name offset to VMCOREINFO

The offset of the field 'init_uts_ns.name' has changed since commit
9a56493f6942 ("uts: Use generic ns_common::count").

Make the offset of the field 'uts_namespace.name' available in VMCOREINFO
because tools like 'crash-utility' and 'makedumpfile' must be able to read
it from crash dumps.

Link: https://lore.kernel.org/r/159644978167.604812.1773586504374412107.stgit@localhost.localdomain
Link: https://lkml.kernel.org/r/20200930102328.396488-1-egorenar@linux.ibm.com
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: lijiang <lijiang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/nilfs2: remove some unused macros to tame gcc

There some macros are unused and cause gcc warning. Remove them.

  fs/nilfs2/segment.c:137:0: warning: macro "nilfs_cnt32_gt" is not used [-Wunused-macros]
  fs/nilfs2/segment.c:144:0: warning: macro "nilfs_cnt32_le" is not used [-Wunused-macros]
  fs/nilfs2/segment.c:143:0: warning: macro "nilfs_cnt32_lt" is not used [-Wunused-macros]

Link: https://lkml.kernel.org/r/1607552733-24292-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add printk_once and printk_ratelimit to prefer pr_<level> warning

Add the _once and _ratelimited variants to the test for
printk(KERN_<LEVEL> that should prefer pr_<level>.

Miscellanea:

o Add comment description for the conversions

[joe@perches.com: fixlet]
Link: https://lkml.kernel.org/r/32260871d4718ba7f48a8e9e07452bb76de300db.camel@perches.comLink:
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix TYPO_SPELLING check for words with apostrophe

checkpatch reports a false TYPO_SPELLING warning for some words containing
an apostrophe when run with --codespell option.

A false positive is "doesn't".  Occurrence of the word causes checkpatch
to emit the following warning:

"WARNING: 'doesn'' may be misspelled - perhaps 'doesn't'?"

Modify the regex pattern to be more in line with the codespell default
word matching regex.  This fixes the word capture and avoids the false
warning.

In addition, highlight the misspelled word location by adding a caret
below the word.

[akpm@linux-foundation.org: make matched misspelling more obvious, per Joe]
Link: https://lkml.kernel.org/r/09c24ef1aa2f1c4fe909d76f5426f08780b9d81c.camel@perches.com
Link: https://lkml.kernel.org/r/20201201190729.169733-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Reported-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add warning for lines starting with a '#' in commit log

Commit log lines starting with '#' are dropped by git as comments.
Add a check to emit a warning for these lines.

Also add a --fix option to insert a space before the leading '#' in
such lines.

Link: https://lkml.kernel.org/r/20201202205740.127986-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Peilin Ye <yepeilin.cs@gmail.com>
Tested-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add warning for unnecessary use of %h[xudi] and %hh[xudi]

Modifiers %h and %hh should never be used.

Commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]") specifies that:

 "Standard integer promotion is already done and %hx and %hhx is useless
  so do not encourage the use of %hh[xudi] or %h[xudi]."

 "The "h" and "hh" things should never be used. The only reason for them
  being used if you have an "int", but you want to print it out as a
  "char" (and honestly, that is a really bad reason, you'd be better off
  just using a proper cast to make the code more obvious)."

Add a new check to emit a warning on finding an unneeded use of %h or
%hh modifier.

Also add a fix option to the check.

Link: https://lore.kernel.org/lkml/4910042649a4f3ab22fac93191b8c1fa0a2e17c3.camel@perches.com/
Link: https://lkml.kernel.org/r/20201128200046.78739-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add fix and improve warning msg for non-standard signature

Currently checkpatch warns for BAD_SIGN_OFF on non-standard signature
styles.

A large number of these warnings occur because of typo mistakes in
signature tags.  An evaluation over v4.13..v5.8 showed that out of 539
warnings due to non-standard signatures, 87 are due to typo mistakes.

Following are the standard signature tags which are often incorrectly
used, along with their individual counts of incorrect use (over
v4.13..v5.8):

Reviewed-by: 42
Signed-off-by: 25
Reported-by: 6
Acked-by: 4
Tested-by: 4
Suggested-by: 4
Provide a fix by calculating levenshtein distance for the signature tag
with all the standard signatures and suggest a fix with a signature, whose
edit distance is less than or equal to 2 with the misspelled signature.

Out of the 86 mispelled signatures fixed with this approach, 85 were found
to be good corrections and 1 was bad correction.

Following was found to be a bad correction:
 Tweeted-by (count: 1) => Tested-by

Link: https://lkml.kernel.org/r/20201128204333.7054-1-yashsri421@gmail.com
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add fix option for LOGICAL_CONTINUATIONS

Currently, checkpatch warns if logical continuations are placed at the
start of a line and not at the end of previous line.

E.g., running checkpatch on commit 3485507fc272 ("staging: bcm2835-camera:
Reduce length of enum names") reports:

  CHECK:LOGICAL_CONTINUATIONS: Logical continuations should be on the previous line
  + if (!ret
  +     && camera_port ==

Provide a simple fix by inserting logical operator at the last
non-comment, non-whitespace char of the previous line and removing from
current line, if both the lines are additions(ie start with '+')

Link: https://lkml.kernel.org/r/20201123102818.24364-1-yashsri421@gmail.com
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add fix option for ASSIGNMENT_CONTINUATIONS

Currently, checkpatch warns us if an assignment operator is placed at the
start of a line and not at the end of previous line.

E.g., running checkpatch on commit 8195b1396ec8 ("hv_netvsc: fix
deadlock on hotplug") reports:

  CHECK: Assignment operator '=' should be on the previous line
  + struct netvsc_device *nvdev
  + = container_of(w, struct netvsc_device, subchan_work);

Provide a simple fix by appending assignment operator to the previous
line and removing from the current line, if both the lines are additions
(ie start with '+')

Link: https://lkml.kernel.org/r/20201121120407.22942-1-yashsri421@gmail.com
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix unescaped left brace

There is an unescaped left brace in a regex in OPEN_BRACE check.  This
throws a runtime error when checkpatch is run with --fix flag and the
OPEN_BRACE check is executed.

Fix it by escaping the left brace.

Link: https://lkml.kernel.org/r/20201115202928.81955-1-dwaipayanray1@gmail.com
Fixes: 8d1824780f2f ("checkpatch: add --fix option for a couple OPEN_BRACE misuses")
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: avoid COMMIT_LOG_LONG_LINE warning for signature tags

Currently checkpatch warns us for long lines in commits even for signature
tag lines.

Generally these lines exceed the 75-character limit because of:

 1) long names and long email address

 2) some comments on scoped review and acknowledgement, i.e., for a
    dedicated pointer on what was reported by the identity in
    'Reported-by'

 3) some additional comments on CC: stable@vger.org tags

Exclude signature tag lines from this class of warning.

There were 1896 COMMIT_LOG_LONG_LINE warnings in v5.6..v5.8 before this
patch application and 1879 afterwards.

A quick manual check found all the dropped warnings related to signature
tags.

Link: https://lkml.kernel.org/r/20201116083754.10629-1-yashsri421@gmail.com
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix spelling errors and remove repeated word

Delete repeated word in scripts/checkpatch.pl:
  "are are" -> "are"

Fix typos:
  "commments" -> "comments"
  "falsly" -> "falsely"

Link: https://lkml.kernel.org/r/20201113152316.62975-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: improve email parsing

checkpatch doesn't report warnings for many common mistakes in emails.
Some of which are trailing commas and incorrect use of email comments.

At the same time several false positives are reported due to incorrect
handling of mail comments.  The most common of which is due to the
pattern:

<stable@vger.kernel.org> # X.X

Improve email parsing in checkpatch.

Some general email rules are defined:

- Multiple name comments should not be allowed.
- Comments inside address should not be allowed.
- In general comments should be enclosed within parentheses.
  Relaxation is given to comments beginning with #.
- Stable addresses should not begin with a name.
- Comments in stable addresses should begin only
  with a #.

Improvements to parsing:

- Detect and report unexpected content after email.
- Quoted names are excluded from comment parsing.
- Trailing dots, commas or quotes in email are removed during
  formatting. Correspondingly a BAD_SIGN_OFF warning
  is emitted.
- Improperly quoted email like '"name <address>"' are now
  warned about.

In addition, added fixes for all the possible rules.

Link: https://lore.kernel.org/linux-kernel-mentees/6c275d95c3033422addfc256a30e6ae3dd37941d.camel@perches.com/
Link: https://lore.kernel.org/linux-kernel-mentees/20201105200857.GC1333458@kroah.com/
Link: https://lkml.kernel.org/r/20201108100632.75340-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add __alias and __weak to suggested __attribute__ conversions

Add __alias and __weak to the suggested __attribute__((<foo>))
conversions.

Link: https://lkml.kernel.org/r/7b74137743c58ce0633ec4d575b94e2210e4dbe7.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add fix option for GERRIT_CHANGE_ID

Currently, whenever a Gerrit Change-Id is present in a commit,
checkpatch.pl warns to remove the Change-Id before submitting the patch.

E.g., running checkpatch on commit adc311a5bbf6 ("iwlwifi: bump FW
API to 53 for 22000 series") reports this error:

  ERROR: Remove Gerrit Change-Id's before submitting upstream
  Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d

Provide a simple fix option by simply deleting the indicated line.

Link: https://lkml.kernel.org/r/20201030114447.24199-1-yashsri421@gmail.com
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: update __attribute__((section("name"))) quote removal

commit 33def8498fdd ("treewide: Convert macro and uses of
__section(foo) to __section("foo")") removed the stringification of the
section name and now requires quotes around the named section.

Update checkpatch to not remove any quotes when suggesting conversion
of __attribute__((section("name"))) to __section("name")

Miscellanea:

o Add section to the hash with __section replacement
o Remove separate test for __attribute__((section
o Remove the limitation on converting attributes containing only
  known, possible conversions.  Any unknown attribute types are now
  left as-is and known types are converted and moved before
  __attribute__ and removed from within the __attribute__((list...)).

[joe@perches.com: eliminate the separate test below the possible conversions loop]
Link: https://lkml.kernel.org/r/58e9d55e933dc8fdc6af489f2ad797fa8eb13e44.camel@perches.com
Link: https://lkml.kernel.org/r/c04dd1c810e8d6a68e6a632e3191ae91651c8edf.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add a fixer for missing newline at eof

Remove the trailing error message from the fixed lines.

Link: https://lkml.kernel.org/r/20201017142546.28988-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: extend attributes check to handle more patterns

It is generally preferred that the macros from
include/linux/compiler_attributes.h are used, unless there is a reason not
to.

checkpatch currently checks __attribute__ for each of packed, aligned,
section, printf, scanf, and weak.  Other declarations in
compiler_attributes.h are not handled.

Add a generic test to check the presence of such attributes.  Some
attributes require more specific handling and are kept separate.

Also add fixes to the generic attributes check to substitute the correct
conversions.

New attributes which are now handled are:

__always_inline__
__assume_aligned__(a, ## __VA_ARGS__)
__cold__
__const__
__copy__(symbol)
__designated_init__
__externally_visible__
__gnu_inline__
__malloc__
__mode__(x)
__no_caller_saved_registers__
__noclone__
__noinline__
__nonstring__
__noreturn__
__pure__
__unused__
__used__

Declarations which contain multiple attributes like
__attribute__((__packed__, __cold__)) are also handled except when proper
conversions for one or more attributes of the list cannot be determined.

Link: https://lore.kernel.org/linux-kernel-mentees/3ec15b41754b01666d94b76ce51b9832c2dd577a.camel@perches.com/
Link: https://lkml.kernel.org/r/20201025193103.23223-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: allow --fix removal of unnecessary break statements

switch/case use of break after a return, goto or break is unnecessary.

There is an existing warning for the return and goto uses, so add
break and a --fix option too.

Link: https://lkml.kernel.org/r/d9ea654104d55f590fb97d252d64a66b23c1a096.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: prefer static const declarations

There are about 100,000 uses of 'static const <type>' but about 400 uses
of 'static <type> const' in the kernel where type is not a pointer.

The kernel almost always uses "static const" over "const static" as there
is a compiler warning for that declaration style.

But there is no compiler warning for "static <type> const".

So add a checkpatch warning for the atypical declaration uses of.

const static <type> <foo>
and
static <type> const <foo>

For example:

  $ ./scripts/checkpatch.pl -f --emacs --quiet --nosummary -types=static_const arch/arm/crypto/aes-ce-glue.c
  arch/arm/crypto/aes-ce-glue.c:75: WARNING: Move const after static - use 'static const u8'
  #75: FILE: arch/arm/crypto/aes-ce-glue.c:75:
  + static u8 const rcon[] = {

Link: https://lkml.kernel.org/r/4b863be68e679546b40d50b97a4a806c03056a1c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: ignore generated CamelCase defines and enum values

Ignore autogenerated CamelCase-like defines and enum values like
DRM_MODE_CONNECTOR_Unknown or ETHTOOL_LINK_MODE_Asym_Pause_BIT.

Link: https://lkml.kernel.org/r/20201022184916.7904-1-l.stelmach@samsung.com
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Suggested-by: Joe Perches <joe@perches.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix false positives in REPEATED_WORD warning

Presence of hexadecimal address or symbol results in false warning
message by checkpatch.pl.

For example, running checkpatch on commit b8ad540dd4e4 ("mptcp: fix
memory leak in mptcp_subflow_create_socket()") results in warning:

  WARNING:REPEATED_WORD: Possible repeated word: 'ff'
      00 00 00 00 00 00 00 00 00 2f 30 0a 81 88 ff ff  ........./0.....

Similarly, the presence of list command output in commit results in
an unnecessary warning.

For example, running checkpatch on commit 899e5ffbf246 ("perf record:
Introduce --switch-output-event") gives:

  WARNING:REPEATED_WORD: Possible repeated word: 'root'
    dr-xr-x---. 12 root root    4096 Apr 27 17:46 ..

Here, it reports 'ff' and 'root' to be repeated, but it is in fact part
of some address or code, where it has to be repeated.

In these cases, the intent of the warning to find stylistic issues in
commit messages is not met and the warning is just completely wrong in
this case.

To avoid these warnings, add an additional regex check for the directory
permission pattern and avoid checking the line for this class of
warning.  Similarly, to avoid hex pattern, check if the word consists of
hex symbols and skip this warning if it is not among the common english
words formed using hex letters.

A quick evaluation on v5.6..v5.8 showed that this fix reduces
REPEATED_WORD warnings by the frequency of 1890.

A quick manual check found all cases are related to hex output or list
command outputs in commit messages.

Link: https://lkml.kernel.org/r/20201024102253.13614-1-yashsri421@gmail.com
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add new exception to repeated word check

Recently, commit 4f6ad8aa1eac ("checkpatch: move repeated word test")
moved the repeated word test to check for more file types. But after
this, if checkpatch.pl is run on MAINTAINERS, it generates several
new warnings of the type:

  WARNING: Possible repeated word: 'git'

For example:

  WARNING: Possible repeated word: 'git'
  +T: git git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml.git

So, the pattern "git git://..." is a false positive in this case.

There are several other combinations which may produce a wrong warning
message, such as "@size size", ":Begin begin", etc.

Extend repeated word check to compare the characters before and after
the word matches.

If there is a non whitespace character before the first word or a non
whitespace character excluding punctuation characters after the second
word, then the check is skipped and the warning is avoided.

Also add case insensitive word matching to the repeated word check.

Link: https://lore.kernel.org/linux-kernel-mentees/81b6a0bb2c7b9256361573f7a13201ebcd4876f1.camel@perches.com/
Link: https://lkml.kernel.org/r/20201017162732.152351-1-dwaipayanray1@gmail.com
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lz4: explicitly support in-place decompression

LZ4 final literal copy could be overlapped when doing
in-place decompression, so it's unsafe to just use memcpy()
on an optimized memcpy approach but memmove() instead.

Upstream LZ4 has updated this years ago [1] (and the impact
is non-sensible [2] plus only a few bytes remain), this commit
just synchronizes LZ4 upstream code to the kernel side as well.

It can be observed as EROFS in-place decompression failure
on specific files when X86_FEATURE_ERMS is unsupported,
memcpy() optimization of commit 59daa706fbec ("x86, mem:
Optimize memcpy by avoiding memory false dependece") will
be enabled then.

Currently most modern x86-CPUs support ERMS, these CPUs just
use "rep movsb" approach so no problem at all. However, it can
still be verified with forcely disabling ERMS feature...

arch/x86/lib/memcpy_64.S:
        ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
-                     "jmp memcpy_erms", X86_FEATURE_ERMS
+                     "jmp memcpy_orig", X86_FEATURE_ERMS

We didn't observe any strange on arm64/arm/x86 platform before
since most memcpy() would behave in an increasing address order
("copy upwards" [3]) and it's the correct order of in-place
decompression but it really needs an update to memmove() for sure
considering it's an undefined behavior according to the standard
and some unique optimization already exists in the kernel.

[1] https://github.com/lz4/lz4/commit/33cb8518ac385835cc17be9a770b27b40cd0e15b
[2] https://github.com/lz4/lz4/pull/717#issuecomment-497818921
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=12518

Link: https://lkml.kernel.org/r/20201122030749.2698994-1-hsiangkao@redhat.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Li Guifu <bluce.liguifu@huawei.com>
Cc: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: cleanup kstrto*() usage

Use proper conversion functions.  kstrto*() variants exist for all
standard types.

Link: https://lkml.kernel.org/r/20201122123410.GB92364@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/misc/lkdtm/lkdtm.h: correct wrong filenames in comment

In lkdtm.h, files targeted in comments are named "lkdtm_file.c" while
there are named "file.c" in directory.

Link: https://lkml.kernel.org/r/20201122162451.27551-6-laniel_francis@privacyrequired.com
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/misc/lkdtm: add new file in LKDTM to test fortified strscpy

This new test ensures that fortified strscpy has the same behavior than
vanilla strscpy (e.g.  returning -E2BIG when src content is truncated).
Finally, it generates a crash at runtime because there is a write overflow
in destination string.

Link: https://lkml.kernel.org/r/20201122162451.27551-5-laniel_francis@privacyrequired.com
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

string.h: add FORTIFY coverage for strscpy()

The fortified version of strscpy ensures the following before vanilla strscpy
is called:

1. There is no read overflow because we either size is smaller than
   src length or we shrink size to src length by calling fortified
   strnlen.

2. There is no write overflow because we either failed during
   compilation or at runtime by checking that size is smaller than dest
   size.

Link: https://lkml.kernel.org/r/20201122162451.27551-4-laniel_francis@privacyrequired.com
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lkdtm: tests for FORTIFY_SOURCE

Add code to test both:

 - runtime detection of the overrun of a structure. This covers the
   __builtin_object_size(x, 0) case. This test is called FORTIFY_OBJECT.

 - runtime detection of the overrun of a char array within a structure.
   This covers the __builtin_object_size(x, 1) case which can be used
   for some string functions. This test is called FORTIFY_SUBOBJECT.

Link: https://lkml.kernel.org/r/20201122162451.27551-3-laniel_francis@privacyrequired.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: string.h: detect intra-object overflow in fortified string functions

Patch series "Fortify strscpy()", v7.

This patch implements a fortified version of strscpy() enabled by setting
CONFIG_FORTIFY_SOURCE=y.  The new version ensures the following before
calling vanilla strscpy():

1. There is no read overflow because either size is smaller than src
   length or we shrink size to src length by calling fortified strnlen().

2. There is no write overflow because we either failed during
   compilation or at runtime by checking that size is smaller than dest
   size.  Note that, if src and dst size cannot be got, the patch defaults
   to call vanilla strscpy().

The patches adds the following:

1. Implement the fortified version of strscpy().

2. Add a new LKDTM test to ensures the fortified version still returns
   the same value as the vanilla one while panic'ing when there is a write
   overflow.

3. Correct some typos in LKDTM related file.

I based my modifications on top of two patches from Daniel Axtens which
modify calls to __builtin_object_size, in fortified string functions, to
ensure the true size of char * are returned and not the surrounding
structure size.

About performance, I measured the slow down of fortified strscpy(), using
the vanilla one as baseline.  The hardware I used is an Intel i3 2130 CPU
clocked at 3.4 GHz.  I ran "Linux 5.10.0-rc4+ SMP PREEMPT" inside qemu
3.10 with 4 CPU cores.  The following code, called through LKDTM, was used
as a benchmark:

#define TIMES 10000
char *src;
char dst[7];
int i;
ktime_t begin;

src = kstrdup("foobar", GFP_KERNEL);

if (src == NULL)
return;

begin = ktime_get();
for (i = 0; i < TIMES; i++)
strscpy(dst, src, strlen(src));
pr_info("%d fortified strscpy() tooks %lld", TIMES, ktime_get() - begin);

begin = ktime_get();
for (i = 0; i < TIMES; i++)
__real_strscpy(dst, src, strlen(src));
pr_info("%d vanilla strscpy() tooks %lld", TIMES, ktime_get() - begin);

kfree(src);

I called the above code 30 times to compute stats for each version (in ns,
round to int):

| version   | mean    | std    | median  | 95th    |
| --------- | ------- | ------ | ------- | ------- |
| fortified | 245_069 | 54_657 | 216_230 | 331_122 |
| vanilla   | 172_501 | 70_281 | 143_539 | 219_553 |

On average, fortified strscpy() is approximately 1.42 times slower than
vanilla strscpy().  For the 95th percentile, the fortified version is
about 1.50 times slower.

So, clearly the stats are not in favor of fortified strscpy().  But, the
fortified version loops the string twice (one in strnlen() and another in
vanilla strscpy()) while the vanilla one only loops once.  This can
explain why fortified strscpy() is slower than the vanilla one.

This patch (of 5):

When the fortify feature was first introduced in commit 6974f0c4555e
("include/linux/string.h: add the option of fortified string.h
functions"), Daniel Micay observed:

  * It should be possible to optionally use __builtin_object_size(x, 1) for
    some functions (C strings) to detect intra-object overflows (like
    glibc's _FORTIFY_SOURCE=2), but for now this takes the conservative
    approach to avoid likely compatibility issues.

This is a case that often cannot be caught by KASAN. Consider:

struct foo {
    char a[10];
    char b[10];
}

void test() {
    char *msg;
    struct foo foo;

    msg = kmalloc(16, GFP_KERNEL);
    strcpy(msg, "Hello world!!");
    // this copy overwrites foo.b
    strcpy(foo.a, msg);
}

The questionable copy overflows foo.a and writes to foo.b as well.  It
cannot be detected by KASAN.  Currently it is also not detected by
fortify, because strcpy considers __builtin_object_size(x, 0), which
considers the size of the surrounding object (here, struct foo).  However,
if we switch the string functions over to use __builtin_object_size(x, 1),
the compiler will measure the size of the closest surrounding subobject
(here, foo.a), rather than the size of the surrounding object as a whole.
See https://gcc.gnu.org/onlinedocs/gcc/Object-Size-Checking.html for more
info.

Only do this for string functions: we cannot use it on things like memcpy,
memmove, memcmp and memchr_inv due to code like this which purposefully
operates on multiple structure members: (arch/x86/kernel/traps.c)

/*
 * regs->sp points to the failing IRET frame on the
 * ESPFIX64 stack.  Copy it to the entry stack.  This fills
 * in gpregs->ss through gpregs->ip.
 *
 */
memmove(&gpregs->ip, (void *)regs->sp, 5*8);

This change passes an allyesconfig on powerpc and x86, and an x86 kernel
built with it survives running with syz-stress from syzkaller, so it seems
safe so far.

Link: https://lkml.kernel.org/r/20201122162451.27551-1-laniel_francis@privacyrequired.com
Link: https://lkml.kernel.org/r/20201122162451.27551-2-laniel_francis@privacyrequired.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string: remove unnecessary #undefs

A few architecture specific string.h functions used to be implemented in
terms of preprocessor defines to the corresponding compiler builtins.
Since this is no longer the case, remove unused #undefs.

Only memcmp is still defined in terms of builtins for a few arches.

Link: https://github.com/ClangBuiltLinux/linux/issues/428
Link: https://lkml.kernel.org/r/20201120041113.89382-1-ndesaulniers@google.com
Fixes: 5f074f3e192f ("lib/string.c: implement a basic bcmp")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ilog2: improve ilog2 for constant arguments

As discussed in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97445 the
const_ilog2 macro generates a lot of code which interferes badly with GCC
inlining heuristics, until it can be proven that the ilog2 argument can or
can't be simplified into a constant.

It can be expressed using __builtin_clzll builtin which is supported by
GCC 3.4 and later and when used only in the __builtin_constant_p guarded
code it ought to always fold back to a constant.  Other compilers support
the same builtin for many years too.

Other option would be to change the const_ilog2 macro, though as the
description says it is meant to be used also in C constant expressions,
and while GCC will fold it to constant with constant argument even in
those, perhaps it is better to avoid using extensions in that case.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20201120125154.GB3040@hirez.programming.kicks-ass.net
Link: https://lkml.kernel.org/r/20201021132718.GB2176@tucnak
Signed-off-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline_kunit: add a new test suite for cmdline API

Test get_option() for a starter which is provided by cmdline.c.

[akpm@linux-foundation.org: fix warning by constifying cmdline_test_values]
[andriy.shevchenko@linux.intel.com: type of expected returned values should be int]
Link: https://lkml.kernel.org/r/20201116104244.15472-1-andriy.shevchenko@linux.intel.com
[andriy.shevchenko@linux.intel.com: provide meaningful MODULE_LICENSE()]
Link: https://lkml.kernel.org/r/20201116104257.15527-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20201112180732.75589-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline: allow NULL to be an output for get_option()

In the future we would like to use get_option() to only validate the
string and parse it separately.  To achieve this, allow NULL to be an
output for get_option().

Link: https://lkml.kernel.org/r/20201112180732.75589-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline: fix get_option() for strings starting with hyphen

When string doesn't have an integer and starts from hyphen get_option()
may return interesting results.  Fix it to return 0.

The simple_strtoull() is used due to absence of simple_strtoul() in a boot
code on some architectures.

Note, the Fixes tag below is rather for anthropological curiosity.

Link: https://lkml.kernel.org/r/20201112180732.75589-4-andriy.shevchenko@linux.intel.com
Fixes: f68565831e72 ("Import 2.4.0-test2pre3")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_lockup.c: minimum fix to get it compiled on PREEMPT_RT

On PREEMPT_RT the locks are quite different so they can't be tested as it
is done below.  The alternative is to test for the waitlock within
rtmutex.

This is the bare minimun to get it compiled.  Problems which exist on
PREEMP_RT:

 - none of the locks (spinlock_t, rwlock_t, mutex_t, rw_semaphore) may
   be acquired with disabled preemption or interrupts.

   If I read the code correct the it is possible to acquire a mutex_t
   with disabled interrupts.

   I don't know how to obtain a lock pointer. Technically they are not
   exported to userland.

 - memory can not be allocated with disabled preemption or interrupts
   even with GFP_ATOMIC.

Link: https://lkml.kernel.org/r/20201028181041.xyeothhkouc3p4md@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stackdepot.c: use array_size() helper in jhash2()

Use array_size() helper instead of the open-coded version in jhash2().
These sorts of multiplication factors need to be wrapped in array_size().

Also, use the preferred form for passing the size of an object type.

Link: https://lkml.kernel.org/r/cb8a682e4bba4dbddd2bd8aca7f8c02fea89639b.1601565471.git.gustavoars@kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stackdepot.c: use flex_array_size() helper in memcpy()

Make use of the flex_array_size() helper to calculate the size of a
flexible array member within an enclosing structure.

This helper offers defense-in-depth against potential integer overflows,
while at the same time makes it explicitly clear that we are dealing with
a flexible array member.

Link: https://lkml.kernel.org/r/186e37fe07196ee41a0e562fa8a8cb7a01112ec5.1601565471.git.gustavoars@kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stackdepot.c: replace one-element array with flexible-array member

Patch series "lib/stackdepot.c: Replace one-element array with flexible-array member".

This series aims to replace a one-element array with a flexible-array
member.  Also, make use of the struct_size(), flexible_array_size() and
array_size() helpers.

This patch (of 3):

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure.  Kernel code
should always use “flexible array members”[1] for these cases.  The
older style of one-element or zero-length arrays should no longer be
used[2].

Refactor the code according to the use of a flexible-array member in
struct stack_record, instead of a one-element array, and use the
struct_size() helper to calculate the size for the allocation.

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://lkml.kernel.org/r/cover.1601565471.git.gustavoars@kernel.org
Link: https://lore.kernel.org/lkml/5f75876b.x9zdN10esiC0qLHV%25lkp@intel.com/
Link: https://lkml.kernel.org/r/2f1e6a17aaa891ad9c58817cf0a10b8ab8894f59.1601565471.git.gustavoars@kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_free_pages.c: add basic progress indicators

The test module to check that free_pages() does not leak memory does not
provide any feedback whatsoever its state or progress, but may take some
time on slow machines.  Add the printing of messages upon starting each
phase of the test, and upon completion.

Link: https://lkml.kernel.org/r/20201018140445.20972-1-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bitmap: remove unused function declaration

Link: https://lkml.kernel.org/r/BN7PR11MB26097166B6B46387D8A1ABA4FDE30@BN7PR11MB2609.namprd11.prod.outlook.com
Fixes: 2afe27c718b6 ("lib/bitmap.c: bitmap_[empty,full]: remove code duplication")
Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/bitmap.h: convert bitmap_empty() / bitmap_full() to return boolean

There is no need to return int type out of boolean expression.

Link: https://lkml.kernel.org/r/20201027180936.20806-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/acct.c: use #elif instead of #end and #elif

Cleanup: use #elif instead of #end and #elif.

Link: https://lkml.kernel.org/r/20201015150736.GA91603@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: split out mathematical helpers

kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out
mathematical helpers.

At the same time convert users in header and lib folder to use new
header.  Though for time being include new header back to kernel.h to
avoid twisted indirected includes for existing users.

[sfr@canb.auug.org.au: fix powerpc build]
Link: https://lkml.kernel.org/r/20201029150809.13059608@canb.auug.org.au
Link: https://lkml.kernel.org/r/20201028173212.41768-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic: force inlining of get_order() to work around gcc10 poor decision

When building mpc885_ads_defconfig with gcc 10.1,
the function get_order() appears 50 times in vmlinux:

  [linux]# ppc-linux-objdump -x vmlinux | grep get_order | wc -l
  50

  [linux]# size vmlinux
     text    data     bss     dec     hex filename
  3842620  675624  135160 4653404  47015c vmlinux

In the old days, marking a function 'static inline' was forcing GCC to
inline, but since commit ac7c3e4ff401 ("compiler: enable
CONFIG_OPTIMIZE_INLINING forcibly") GCC may decide to not inline a
function.

It looks like GCC 10 is taking poor decisions on this.

get_order() compiles into the following tiny function, occupying 20
bytes of text.

  0000007c <get_order>:
    7c:   38 63 ff ff     addi    r3,r3,-1
    80:   54 63 a3 3e     rlwinm  r3,r3,20,12,31
    84:   7c 63 00 34     cntlzw  r3,r3
    88:   20 63 00 20     subfic  r3,r3,32
    8c:   4e 80 00 20     blr

By forcing get_order() to be __always_inline, the size of text is
reduced by 1940 bytes, that is almost twice the space occupied by
50 times get_order()

  [linux-powerpc]# size vmlinux
     text    data     bss     dec     hex filename
  3840680  675588  135176 4651444  46f9b4 vmlinux

Link: https://lkml.kernel.org/r/96c6172d619c51acc5c1c4884b80785c59af4102.1602949927.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc: make pde_get() return nothing

We don't need pde_get()'s return value, so make pde_get() return nothing

Link: https://lkml.kernel.org/r/20201211061944.GA2387571@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: fix lookup in /proc/net subdirectories after setns(2)

Commit 1fde6f21d90f ("proc: fix /proc/net/* after setns(2)") only forced
revalidation of regular files under /proc/net/

However, /proc/net/ is unusual in the sense of /proc/net/foo handlers
take netns pointer from parent directory which is old netns.

Steps to reproduce:

(void)open("/proc/net/sctp/snmp", O_RDONLY);
unshare(CLONE_NEWNET);

int fd = open("/proc/net/sctp/snmp", O_RDONLY);
read(fd, &c, 1);

Read will read wrong data from original netns.

Patch forces lookup on every directory under /proc/net .

Link: https://lkml.kernel.org/r/20201205160916.GA109739@localhost.localdomain
Fixes: 1da4d377f943 ("proc: revalidate misc dentries")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: provide details on indirect branch speculation

Similar to speculation store bypass, show information about the indirect
branch speculation mode of a task in /proc/$pid/status.

For testing/benchmarking, I needed to see whether IB (Indirect Branch)
speculation (see Spectre-v2) is enabled on a task, to see whether an
IBPB instruction should be executed on an address space switch.
Unfortunately, this information isn't available anywhere else and
currently the only way to get it is to hack the kernel to expose it
(like this change).  It also helped expose a bug with conditional IB
speculation on certain CPUs.

Another place this could be useful is to audit the system when using
sanboxing.  With this change, I can confirm that seccomp-enabled
process have IB speculation force disabled as expected when the kernel
command line parameter `spectre_v2_user=seccomp`.

Since there's already a 'Speculation_Store_Bypass' field, I used that
as precedent for adding this one.

[amistry@google.com: remove underscores from field name to workaround documentation issue]
Link: https://lkml.kernel.org/r/20201106131015.v2.1.I7782b0cedb705384a634cfd8898eb7523562da99@changeid
Link: https://lkml.kernel.org/r/20201030172731.1.I7782b0cedb705384a634cfd8898eb7523562da99@changeid
Signed-off-by: Anand K Mistry <amistry@google.com>
Cc: Anthony Steinhauser <asteinhauser@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Anand K Mistry <amistry@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: delete duplicated words + other fixes

Delete repeated words in fs/proc/.
{the, which}
where "which which" was changed to "with which".

Link: https://lkml.kernel.org/r/20201028191525.13413-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: replace bogus in_interrupt()

in_interrupt() is true for a variety of things including bottom half
disabled regions.  Deducing hard interrupt context from it is dubious at
best.

Use in_irq() which is true if called in hard interrupt context.  Otherwise
calling irq_exit() would do more harm than good.

Link: https://lkml.kernel.org/r/20201113135832.2202833-1-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: quieting offline operation

On PowerPC, when dymically removing memory from a system we can see in the
console a lot of messages like this:

[  186.575389] Offlined Pages 4096

This message is displayed on each LMB (256MB) removed, which means that we
removing 1TB of memory, this message is displayed 4096 times.

Moving it to DEBUG to not flood the console.

Link: https://lkml.kernel.org/r/20201211150157.91399-1-ldufour@linux.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix a race on nr_swap_pages

The scenario on which "Free swap = -4kB" happens in my system, which is caused
by several get_swap_pages racing with each other and show_swap_cache_info
happens simutaniously. No need to add a lock on get_swap_page_of_type as we
remove "Presub/PosAdd" here.

ProcessA ProcessB ProcessC
ngoals = 1 ngoals = 1
avail = nr_swap_pages(1) avail = nr_swap_pages(1)
nr_swap_pages(1) -= ngoals
nr_swap_pages(0) -= ngoals
nr_swap_pages = -1

Link: https://lkml.kernel.org/r/1607050340-4535-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pci-v5.11-changes' of git://git./linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Decode PCIe 64 GT/s link speed (Gustavo Pimentel)
   - Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit)
   - Reduce pci_set_cacheline_size() message to debug level (Heiner
     Kallweit)
   - Fix pci_slot_release() NULL pointer dereference (Jubin Zhong)
   - Unify ECAM constants in native PCI Express drivers (Krzysztof
     Wilczyński)
   - Return u8 from pci_find_capability() and similar (Puranjay Mohan)
   - Return u16 from pci_find_ext_capability() and similar (Bjorn
     Helgaas)
   - Fix ACPI companion lookup for device 0 on the root bus (Rafael J.
     Wysocki)

  Resource management:
   - Keep both device and resource name for config space remaps
     (Alexander Lobakin)
   - Bounds-check command-line resource alignment requests (Bjorn
     Helgaas)
   - Fix overflow in command-line resource alignment requests (Colin Ian
     King)

  Driver binding:
   - Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan)

  Power management:
   - Save/restore Precision Time Measurement Capability for
     suspend/resume (David E. Box)
   - Disable PTM during suspend to save power (David E. Box)
   - Add sysfs attribute for device power state (Maximilian Luz)
   - Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg)
   - Do not generate wakeup event when runtime resuming device (Mika
     Westerberg)
   - Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar)

  Virtualization:
   - Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher)
   - Add function 1 DMA alias quirk for Marvell 9215 SATA controller
     (Bjorn Helgaas)

  MSI:
   - Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko)
   - Improve warnings for 32-bit-limited MSI support (Vidya Sagar)

  Error handling:
   - Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V
     Kelley)
   - Rename reset_link() to reset_subordinates() (Sean V Kelley)
   - Write AER Capability only when we control it (Sean V Kelley)
   - Clear AER status only when we control AER (Sean V Kelley)
   - Bind RCEC devices to the Root Port driver (Qiuxu Zhuo)
   - Recover from RCiEP AER errors (Qiuxu Zhuo)
   - Recover from RCEC AER errors (Sean V Kelley)
   - Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley)
   - Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley)
   - Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley)
   - Add RCEC AER error injection support (Qiuxu Zhuo)

  Broadcom iProc PCIe controller driver:
   - Fix out-of-bound array accesses (Bharat Gooty)
   - Invalidate correct PAXB inbound windows (Roman Bacik)
   - Enhance PCIe Link information display (Srinath Mannam)

  Cadence PCIe controller driver:
   - Make "cdns,max-outbound-regions" property optional (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:
   - Offset client MSI-X vectors (Jon Derrick)
   - Update type of __iomem pointers (Krzysztof Wilczyński)

  NVIDIA Tegra PCIe controller driver:
   - Move "dbi" accesses to post common DWC initialization (Vidya Sagar)
   - Read "dbi" base address to program in application logic (Vidya
     Sagar)
   - Fix ASPM-L1SS advertisement disable code (Vidya Sagar)
   - Set DesignWare IP version (Vidya Sagar)
   - Continue unconfig sequence even if parts fail (Vidya Sagar)
   - Check return value of tegra_pcie_init_controller() (Vidya Sagar)
   - Disable LTSSM during L2 entry (Vidya Sagar)

  Qualcomm PCIe controller driver:
   - Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam)
   - Add SM8250 SoC support (Manivannan Sadhasivam)
   - Add support for configuring BDF to SID mapping for SM8250
     (Manivannan Sadhasivam)

  Renesas R-Car PCIe controller driver:
   - rcar: Drop unused members from struct rcar_pcie_host (Lad
     Prabhakar)
   - PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar)
   - PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro
     Shimoda)
   - PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda)

  Samsung Exynos PCIe controller driver:
   - Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung)
   - Rework driver to support Exynos5433 variant (Jaehoon Chung)
   - Drop samsung,exynos5440-pcie binding (Marek Szyprowski)
   - Add the samsung,exynos-pcie binding (Marek Szyprowski)
   - Add the samsung,exynos-pcie-phy binding (Marek Szyprowski)

  Synopsys DesignWare PCIe controller driver:
   - Support multiple ATU memory regions (Rob Herring)
   - Move intel-gw ATU offset out of driver match data (Rob Herring)
   - Move "dbi", "dbi2", and "addr_space" resource setup into common
     code (Rob Herring)
   - Remove intel-gw unneeded function wrappers (Rob Herring)
   - Ensure all outbound ATU windows are reset (Rob Herring)
   - Use the common MSI irq_chip in dra7xx (Rob Herring)
   - Drop the .set_num_vectors() host op (Rob Herring)
   - Move MSI interrupt setup into DWC common code (Rob Herring)
   - Rework MSI initialization (Rob Herring)
   - Move link handling into common code (Rob Herring)
   - Move dw_pcie_msi_init() into core (Rob Herring)
   - Move dw_pcie_setup_rc() to DWC common code (Rob Herring)
   - Remove unnecessary wrappers around dw_pcie_host_init() (Rob
     Herring)
   - Drop keystone duplicated 'num-viewport'" (Rob Herring)
   - Move inbound and outbound windows to common struct (Rob Herring)
   - Detect number of iATU windows (Rob Herring)
   - Warn if non-prefetchable memory aperture size is > 32-bit (Vidya
     Sagar)
   - Add support to program ATU for >4GB memory (Vidya Sagar)
   - Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar)

  TI J721E PCIe driver:
   - Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I)
   - Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham
     I)
   - Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I)
   - Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
     (Kishon Vijay Abraham I)

  TI Keystone PCIe controller driver:
   - Enable compile-testing on !ARM (Alex Dewar)"

* tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller
  PCI/ACPI: Fix companion lookup for device 0 on the root bus
  PCI: Keep both device and resource name for config space remaps
  PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c
  PCI: vmd: Update type of the __iomem pointers
  PCI: iproc: Convert to use the new ECAM constants
  PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser
  PCI: Unify ECAM constants in native PCI Express drivers
  PCI: Disable PTM during suspend to save power
  PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
  PCI: Mark AMD Raven iGPU ATS as broken in some platforms
  PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
  dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
  dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
  PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
  PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
  PCI: Reduce pci_set_cacheline_size() message to debug level
  PCI: Remove unused HAVE_PCI_SET_MWI
  PCI: qcom: Add SM8250 SoC support
  ...

Merge tag 'acpi-5.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20201113, fix and clean up some resources manipulation code, extend
  the enumeration and gpio-line-names property documentation, clean up
  the handling of _DEP during device enumeration, add a new backlight
  DMI quirk, clean up transaction handling in the EC driver and make
  some assorted janitorial changes.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20201113 with
     changes as follows:
       * Add 5 new UUIDs to the known UUID table (Bob Moore)
       * Remove extreaneous "the" in comments (Colin Ian King)
       * Add function trace macros to improve debugging (Erik Kaneda)
       * Fix interpreter memory leak (Erik Kaneda)
       * Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)

   - Introduce resource_union() and resource_intersection() helpers and
     clean up some resource-manipulation code with the help of them
     (Andy Shevchenko)

   - Revert problematic commit related to the handling of resources in
     the ACPI core (Daniel Scally)

   - Extend the ACPI device enumeration documentation and the
     gpio-line-names _DSD property documentation, clean up the latter
     (Flavio Suligoi)

   - Clean up _DEP handling during device enumeration, modify the list
     of _DEP exceptions and the handling of it and fix up terminology
     related to _DEP (Hans de Goede, Rafael Wysocki)

   - Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
     Andrzej Siewior)

   - Clean up the advance_transaction() routine and related code in the
     ACPI EC driver (Rafael Wysocki)

   - Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
     Pierre)

   - Make assorted janitorial changes in several ACPI-related pieces of
     code (Hanjun Guo, Jason Yan, Punit Agrawal)"

* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
  ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
  ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
  ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
  Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
  ACPI: scan: Add PNP0D80 to the _DEP exceptions list
  ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
  ACPI: scan: Add acpi_info_matches_hids() helper
  ACPICA: Update version to 20201113
  ACPICA: Interpreter: fix memory leak by using existing buffer
  ACPICA: Add function trace macros to improve debugging
  ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
  ACPICA: Remove extreaneous "the" in comments
  ACPICA: Add 5 new UUIDs to the known UUID table
  resource: provide meaningful MODULE_LICENSE() in test suite
  ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
  ACPI: processor: Drop duplicate setting of shared_cpu_map
  ACPI: EC: Clean up status flags checks in advance_transaction()
  ACPI: EC: Untangle error handling in advance_transaction()
  ACPI: EC: Simplify error handling in advance_transaction()
  ACPI: EC: Rename acpi_ec_is_gpe_raised()
  ...

Merge tag 'pm-5.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These update cpufreq (core and drivers), cpuidle (polling state
  implementation and the PSCI driver), the OPP (operating performance
  points) framework, devfreq (core and drivers), the power capping RAPL
  (Running Average Power Limit) driver, the Energy Model support, the
  generic power domains (genpd) framework, the ACPI device power
  management, the core system-wide suspend code and power management
  utilities.

  Specifics:

   - Use local_clock() instead of jiffies in the cpufreq statistics to
     improve accuracy (Viresh Kumar).

   - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
     drivers (Viresh Kumar).

   - Clean up the cpufreq core, the intel_pstate driver and the
     schedutil cpufreq governor (Rafael Wysocki).

   - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
     drivers (Yangtao Li, Qinglang Miao).

   - Fix cpufreq_online() to return error codes instead of success (0)
     in all cases when it fails (Wang ShaoBo).

   - Add mt8167 support to the mediatek cpufreq driver and blacklist
     mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).

   - Modify the tegra194 cpufreq driver to always return values from the
     frequency table as the current frequency and clean up that driver
     (Sumit Gupta, Jon Hunter).

   - Modify the arm_scmi cpufreq driver to allow it to discover the
     power scale present in the performance protocol and provide this
     information to the Energy Model (Lukasz Luba).

   - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
     Rohár).

   - Clean up the CPPC cpufreq driver (Ionela Voinescu).

   - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
     Bergmann).

   - Rework the poling interval selection for the polling state in
     cpuidle (Mel Gorman).

   - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
     (Ulf Hansson).

   - Modify the OPP framework to support empty (node-less) OPP tables in
     DT for passing dependency information (Nicola Mazzucato).

   - Fix potential lockdep issue in the OPP core and clean up the OPP
     core (Viresh Kumar).

   - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
     update its users accordingly (Viresh Kumar).

   - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).

   - Add support for governor feature flags to devfreq, make devfreq
     sysfs file permissions depend on the governor and clean up the
     devfreq core (Chanwoo Choi).

   - Clean up the tegra20 devfreq driver and deprecate it to allow
     another driver based on EMC_STAT to be used instead of it (Dmitry
     Osipenko).

   - Add interconnect support to the tegra30 devfreq driver, allow it to
     take the interconnect and OPP information from DT and clean it up
     (Dmitry Osipenko).

   - Add interconnect support to the exynos-bus devfreq driver along
     with interconnect properties documentation (Sylwester Nawrocki).

   - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
     capping driver (Victor Ding, Kim Phillips).

   - Fix handling of overly long constraint names in the powercap
     framework (Lukasz Luba).

   - Fix the wakeup configuration handling for bridges in the ACPI
     device power management core (Rafael Wysocki).

   - Add support for using an abstract scale for power units in the
     Energy Model (EM) and document it (Lukasz Luba).

   - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
     Kondeti).

   - Modify the generic power domains (genpd) framwework to support
     suspend-to-idle (Ulf Hansson).

   - Fix creation of debugfs nodes in genpd (Thierry Strudel).

   - Clean up genpd (Lina Iyer).

   - Clean up the core system-wide suspend code and make it print driver
     flags for devices with debug enabled (Alex Shi, Patrice Chotard,
     Chen Yu).

   - Modify the ACPI system reboot code to make it prepare for system
     power off to avoid confusing the platform firmware (Kai-Heng Feng).

   - Update the pm-graph (multiple changes, mostly usability-related)
     and cpupower (online and offline CPU information support) PM
     utilities (Todd Brandt, Brahadambal Srinivasan)"

* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  PM: domains: create debugfs nodes when adding power domains
  opp: of: Allow empty opp-table with opp-shared
  dt-bindings: opp: Allow empty OPP tables
  media: venus: dev_pm_opp_put_*() accepts NULL argument
  drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
  drm/lima: dev_pm_opp_put_*() accepts NULL argument
  PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
  opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
  opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
  cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
  opp: Reduce the size of critical section in _opp_kref_release()
  PM / EM: Micro optimization in em_cpu_energy
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  ...

Merge tag 'thermal-v5.11-rc1' of git://git./linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add upper and lower limits clamps for the cooling device state in the
   power allocator governor (Michael Kao)

 - Add upper and lower limits support for the power allocator governor
   (Lukasz Luba)

 - Optimize conditions testing for the trip points (Bernard Zhao)

 - Replace spin_lock_irqsave by spin_lock in hard IRQ on the rcar driver
   (Tian Tao)

 - Add MT8516 dt-bindings and device reset optional support (Fabien
   Parent)

 - Add a quiescent period to cool down the PCH when entering S0iX
   (Sumeet Pawnikar)

 - Use bitmap API instead of re-inventing the wheel on sun8i (Yangtao
   Li)

 - Remove useless NULL check in the hwmon driver (Bernard Zhao)

 - Update the current state in the cpufreq cooling device only if the
   frequency change is effective (Zhuguangqing)

 - Improve the schema validation for the rcar DT bindings (Geert
   Uytterhoeven)

 - Fix the user time unit in the documentation (Viresh Kumar)

 - Add PCI ids for Lewisburg PCH (Andres Freund)

 - Add hwmon support on amlogic (Martin Blumenstingl)

 - Fix build failure for PCH entering on in S0iX (Randy Dunlap)

 - Improve the k_* coefficient for the power allocator governor (Lukasz
   Luba)

 - Fix missing const on a sysfs attribute (Rikard Falkeborn)

 - Remove broken interrupt support on rcar to be replaced by a new one
   (Niklas Söderlund)

 - Improve the error code handling at init time on imx8mm (Fabio
   Estevam)

 - Compute interval validity once instead at each temperature reading
   iteration on acerhdf (Daniel Lezcano)

 - Add r8a779a0 support (Niklas Söderlund)

 - Add PCI ids for AlderLake PCH and mmio refactoring (Srinivas
   Pandruvada)

 - Add RFIM and mailbox support on int340x (Srinivas Pandruvada)

 - Use macro for temperature calculation on PCH (Sumeet Pawnikar)

 - Simplify return conditions at probe time on Broadcom (Zheng Yongjun)

 - Fix workload name on PCH (Srinivas Pandruvada)

 - Migrate the devfreq cooling device code to the energy model API
   (Lukasz Luba)

 - Emit a warning if the thermal_zone_device_update is called without
   the .get_temp() ops (Daniel Lezcano)

 - Add critical and hot ops for the thermal zone (Daniel Lezcano)

 - Remove notification usage when critical is reached on rcar (Daniel
   Lezcano)

 - Fix devfreq build when ENERGY_MODEL is not set (Lukasz Luba)

* tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
  thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL
  thermal/drivers/rcar: Remove notification usage
  thermal/core: Add critical and hot ops
  thermal/core: Emit a warning if the thermal zone is updated without ops
  drm/panfrost: Register devfreq cooling and attempt to add Energy Model
  thermal: devfreq_cooling: remove old power model and use EM
  thermal: devfreq_cooling: add new registration functions with Energy Model
  thermal: devfreq_cooling: use a copy of device status
  thermal: devfreq_cooling: change tracing function and arguments
  thermal: int340x: processor_thermal: Correct workload type name
  thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()
  thermal: intel: pch: use macro for temperature calculation
  thermal: int340x: processor_thermal: Add mailbox driver
  thermal: int340x: processor_thermal: Add RFIM driver
  thermal: int340x: processor_thermal: Add AlderLake PCI device id
  thermal: int340x: processor_thermal: Refactor MMIO interface
  thermal: rcar_gen3_thermal: Add r8a779a0 support
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
  platform/x86/drivers/acerhdf: Check the interval value when it is set
  platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - support for inhibiting input devices at request from userspace. If a
   device implements open/close methods, it can also put device into low
   power state. This is needed, for example, to disable keyboard and
   touchpad on convertibles when they are transitioned into tablet mode

 - now that ordinary input devices can be configured for polling mode,
   dedicated input polling device implementation has been removed

 - GTCO tablet driver has been removed, as it used problematic custom
   HID parser, devices are EOL, and there is no interest from the
   manufacturer

 - a new driver for Dialog DA7280 haptic chips has been introduced

 - a new driver for power button on Dell Wyse 3020

 - support for eKTF2132 in ektf2127 driver

 - support for SC2721 and SC2730 in sc27xx-vibra driver

 - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan
   touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers

 - fixes and cleanups to allow clean builds with W=1

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
  Input: da7280 - fix spelling mistake "sequemce" -> "sequence"
  Input: cyapa_gen6 - fix out-of-bounds stack access
  Input: sc27xx - add support for sc2730 and sc2721
  dt-bindings: input: Add compatible string for SC2721 and SC2730
  dt-bindings: input: Convert sc27xx-vibra.txt to json-schema
  Input: stmpe - add axis inversion and swapping capability
  Input: adp5589-keys - do not explicitly control IRQ for wakeup
  Input: adp5589-keys - do not unconditionally configure as wakeup source
  Input: ipx4xx-beeper - convert comma to semicolon
  Input: parkbd - convert comma to semicolon
  Input: new da7280 haptic driver
  dt-bindings: input: Add document bindings for DA7280
  MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms
  Input: elantech - fix protocol errors for some trackpoints in SMBus mode
  Input: elan_i2c - add new trackpoint report type 0x5F
  Input: elants - document some registers and values
  Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd()
  Input: imx_keypad - add COMPILE_TEST support
  Input: applespi - use new structure for SPI transfer delays
  Input: synaptics-rmi4 - use new structure for SPI transfer delays
  ...

Merge tag 'platform-drivers-x86-v5.11-1' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - New driver for changing BIOS settings from within Linux on Dell
     devices. This introduces a new generic sysfs API for this. Lenovo
     is working on also supporting this API on their devices

   - New Intel PMT telemetry and crashlog drivers

   - Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid
     drivers

   - Preparation work for improving support for Microsoft Surface
     hardware

   - Various fixes / improvements / quirks for the panasonic-laptop and
     others"

* tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (81 commits)
  platform/x86: ISST: Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
  platform/x86: intel-hid: add Rocket Lake ACPI device ID
  x86/platform: classmate-laptop: add WiFi media button
  platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system
  platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems
  tools/power/x86/intel-speed-select: Update version for v5.11
  tools/power/x86/intel-speed-select: Account for missing sysfs for die_id
  tools/power/x86/intel-speed-select: Read TRL from mailbox
  platform/x86: intel-hid: Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
  platform/x86: intel-hid: Add alternative method to enable switches
  platform/x86: intel-hid: Add support for SW_TABLET_MODE
  platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
  platform/x86: ISST: Change PCI device macros
  platform/x86: ISST: Allow configurable offset range
  platform/x86: ISST: Check for unaligned mmio address
  acer-wireless: send an EV_SYN/SYN_REPORT between state changes
  platform/x86: dell-wmi-sysman: work around for BIOS bug
  platform/x86: mlx-platform: remove an unused variable
  platform/x86: thinkpad_acpi: remove trailing semicolon in macro definition
  platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init
  ...

Merge tag 'hwmon-for-v5.11' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - SB-TSI sensors
   - Lineat Technology LTC2992
   - Delta power supplies Q54SJ108A2
   - Maxim MAX127
   - Corsair PSU
   - STMicroelectronics PM6764 Voltage Regulator

  New chip support:
   - P10 added to fsi/occ driver
   - NCT6687D added to nct6883 driver
   - Intel-based Xserves added to applesmc driver
   - AMD family 19h model 01h added to amd_energy driver

  And various minor bug fixes and improvements"

* tag 'hwmon-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
  dt-bindings: (hwmon/sbtsi_temp) Add SB-TSI hwmon driver bindings
  hwmon: (sbtsi) Add documentation
  hwmon: (sbtsi) Add basic support for SB-TSI sensors
  hwmon: (iio_hwmon) Drop bogus __refdata annotation
  hwmon: (xgene) Drop bogus __refdata annotation
  dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
  hwmon: (occ) Add new temperature sensor type
  fsi: occ: Add support for P10
  dt-bindings: fsi: Add P10 OCC device documentation
  dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema
  dt-bindings: hwmon: convert AD AD741x bindings to dt-schema
  dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema
  hwmon: (ltc2992) Fix less than zero comparisons with an unsigned integer
  hwmon: (pmbus/q54sj108a2) Correct title underline length
  dt-bindings: hwmon: Add documentation for ltc2992
  hwmon: (ltc2992) Add support for GPIOs.
  hwmon: (ltc2992) Add support
  hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2
  hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator
  hwmon: (nct6683) Support NCT6687D.
  ...

Merge tag 'mmc-v5.11' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Initial support for SD express card/host

  MMC host:
   - mxc: Convert the driver to DT-only
   - mtk-sd: Add HS400 enhanced strobe support
   - mtk-sd: Add support for the MT8192 SoC variant
   - sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040
   - sdhci-esdhc-imx: Convert the driver to DT-only
   - sdhci-pci-gli: Improve performance for HS400 mode for GL9763E
   - sdhci-pci-gli: Reduce power consumption for GL9755
   - sdhci-xenon: Introduce ACPI support
   - tmio: Fix command error processing
   - tmio: Inform the core about the max_busy_timeout
   - tmio/renesas_sdhi: Support custom calculation of busy-wait time
   - renesas_sdhi: Reset SCC only when available
   - rtsx_pci: Add SD Express mode support for RTS5261
   - rtsx_pci: Various fixes and improvements for RTS5261

  MEMSTICK:
   - Minor fixes/improvements"

* tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (72 commits)
  dt-bindings: mmc: eliminate yamllint warnings
  mmc: sdhci-xenon: introduce ACPI support
  mmc: sdhci-xenon: use clk only with DT
  mmc: sdhci-xenon: switch to device_* API
  mmc: sdhci-xenon: use match data for controllers variants
  dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driver
  mmc: renesas_sdhi: populate hook for longer busy_wait
  mmc: tmio: add hook for custom busy_wait calculation
  mmc: tmio: set max_busy_timeout
  dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string
  mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E
  mmc: sdhci: Use more concise device_property_read_u64
  memstick: r592: Fix error return in r592_probe()
  mmc: mxc: Convert the driver to DT-only
  mmc: mxs: Remove the unused .id_table
  mmc: sdhci-of-arasan: Fix fall-through warnings for Clang
  mmc: sdhci-pci-gli: Reduce power consumption for GL9755
  mmc: mediatek: depend on COMMON_CLK to fix compile tests
  mmc: pxamci: Fix error return code in pxamci_probe
  mmc: sdhci: Update firmware interface API
  ...

Merge branch 'i2c/for-5.11' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "A bit smaller this time with mostly usual driver updates. Slave
  support for imx stands out a little"

* 'i2c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (30 commits)
  i2c: remove check that can never be true
  i2c: Warn when device removing fails
  dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC
  dt-bindings: i2c: Add compatible string for AM64 SoC
  i2c: designware: Make register offsets all of the same width
  i2c: designware: Switch header to use BIT() and GENMASK()
  i2c: pxa: move to generic GPIO recovery
  i2c: sh_mobile: Mark adapter suspended during suspend
  i2c: owl: Add compatible for the Actions Semi S500 I2C controller
  dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
  i2c: imx: support slave mode for imx I2C driver
  i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL
  i2c: ocores: Avoid false-positive error log message.
  Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630"
  i2c: mxs: Remove unneeded platform_device_id
  i2c: pca-platform: drop two members from driver data that are assigned to only
  i2c: imx: Remove unused .id_table support
  i2c: nvidia-gpu: drop empty stub for runtime pm
  dt-bindings: i2c: mellanox,i2c-mlxbf: convert txt to YAML schema
  i2c: mv64xxx: Add bus error recovery
  ...

Merge tag 'spi-v5.11' of git://git./linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The big change this release has been some excellent work from Lukas
  Wunner which closes a bunch of holes in the cleanup paths for drivers,
  mainly introduced as a result of devm conversions causing bad
  interactions with the support SPI has for allocating the bus and
  driver data together.

  Together with some of the other work done it feels like we've turned
  the corner on several long standing pain points with the API.

  Summary:

   - Many cleanups around probe/remove and error handling from Lukas
     Wunner and Uwe Kleine-König, and further fixes around PM from Zhang
     Qilong.

   - Provide a mask for which bits of the mode can safely be configured
     by drivers and use that to fix an issue with the ADS7846 driver.

   - Documentation of the expected interactions between SPI and GPIO
     level chip select polarity configuration from H. Nikolaus Schaller,
     hopefully we're pretty much at the end of sorting out the
     interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus
     Walleij for this.

   - DMA support for Allwinner sun6i controllers.

   - Support for Canaan K210 Designware implementations and Intel Adler
     Lake"

* tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
  spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  spi: Limit the spi device max speed to controller's max speed
  spi: spi-geni-qcom: Use the new method of gpio CS control
  platform/chrome: cros_ec_spi: Drop bits_per_word assignment
  platform/chrome: cros_ec_spi: Don't overwrite spi::mode
  spi: dw: Add support for the Canaan K210 SoC SPI
  spi: dw: Add support for 32-bits max xfer size
  dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller
  spi: Update DT binding docs to support SiFive FU740 SoC
  spi: atmel-quadspi: Fix use-after-free on unbind
  spi: npcm-fiu: Disable clock in probe error path
  spi: ar934x: Don't leak SPI master in probe error path
  spi: mt7621: Don't leak SPI master in probe error path
  spi: mt7621: Disable clock in probe error path
  media: netup_unidvb: Don't leak SPI master in probe error path
  spi: sc18is602: Don't leak SPI master in probe error path
  spi: rb4xx: Don't leak SPI master in probe error path
  spi: gpio: Don't leak SPI master in probe error path
  spi: spi-mtk-nor: Don't leak SPI master in probe error path
  spi: mxic: Don't leak SPI master in probe error path
  ...

Merge tag 'regulator-v5.11' of git://git./linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This has been a quiet release for the regulator API, a few new drivers
  and the usual fixes and cleanup traffic but not much else going on:

   - Optimisations for the handling of voltage enumeration, especially
     with sparse selector sets, from Claudiu Beznea.

   - Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00,
     Qualcomm PMX55, PM8350 and PM8350c

  The addition of the SCMI regulator driver (which controls regulators
  via system firmware) means that we've pulled in the support for the
  underlying firmware operations from the firmware tree"

* tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits)
  regulator: mc13892-regulator: convert comma to semicolon
  regulator: pfuze100: Convert the driver to DT-only
  regulator: max14577: Add proper module aliases strings
  regulator: da9121: Potential Oops in da9121_assign_chip_model()
  regulator: da9121: Fix index used for DT property
  regulator: da9121: Remove uninitialised string variable
  regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x
  regulator: qcom-rpmh: Add support for PM8350/PM8350c
  regulator: dt-bindings: Add PM8350x compatibles
  regulator: da9121: include linux/gpio/consumer.h
  regulator: da9121: Mark some symbols with static keyword
  regulator: da9121: Request IRQ directly and free in release function to avoid masking race
  regulator: da9121: add interrupt support
  regulator: da9121: add mode support
  regulator: da9121: add current support
  regulator: da9121: Update registration to support multiple buck variants
  regulator: da9121: Add support for device variants via devicetree
  regulator: da9121: Add device variant descriptors
  regulator: da9121: Add device variant regmaps
  regulator: da9121: Add device variants
  ...

Merge tag 'regmap-v5.11' of git://git./linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "This is quite a busy release for regmap with two substantial features
  being added:

    - Support for register maps Soundwire 1.2 multi-byte operations,
      allowing atomic support for registers larger than a single byte.

    - Support for relaxed I/O without barriers in MMIO regmaps, allowing
      them to be used efficiently on systems where default MMIO
      operations include barriers.

  There was also an addition and revert of use of the new Soundwire
  support for RT715 due to build issues with the driver built in, my
  tests only covered building it as a module, the patch wasn't just
  dropped as it had already been merged elsewhere"

* tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  ASoC: rt715: Fix build
  regmap: sdw: add required header files
  regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event
  regmap: Fix order of regmap write log
  regmap: mmio: add config option to allow relaxed MMIO accesses

Merge tag 'irq-core-2020-12-15' of git://git./linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Generic interrupt and irqchips subsystem updates. Unusually, there is
  not a single completely new irq chip driver, just new DT bindings and
  extensions of existing drivers to accomodate new variants!

  Core:

   - Consolidation and robustness changes for irq time accounting

   - Cleanup and consolidation of irq stats

   - Remove the fasteoi IPI flow which has been proved useless

   - Provide an interface for converting legacy interrupt mechanism into
     irqdomains

  Drivers:

   - Preliminary support for managed interrupts on platform devices

   - Correctly identify allocation of MSIs proxyied by another device

   - Generalise the Ocelot support to new SoCs

   - Improve GICv4.1 vcpu entry, matching the corresponding KVM
     optimisation

   - Work around spurious interrupts on Qualcomm PDC

   - Random fixes and cleanups"

* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
  driver core: platform: Add devm_platform_get_irqs_affinity()
  ACPI: Drop acpi_dev_irqresource_disabled()
  resource: Add irqresource_disabled()
  genirq/affinity: Add irq_update_affinity_desc()
  irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
  irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
  platform-msi: Track shared domain allocation
  irqchip/ti-sci-intr: Fix freeing of irqs
  irqchip/ti-sci-inta: Fix printing of inta id on probe success
  drivers/irqchip: Remove EZChip NPS interrupt controller
  Revert "genirq: Add fasteoi IPI flow"
  irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
  irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
  irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
  irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
  irqchip/ocelot: Add support for Jaguar2 platforms
  irqchip/ocelot: Add support for Serval platforms
  irqchip/ocelot: Add support for Luton platforms
  irqchip/ocelot: prepare to support more SoC
  ...

Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:
 "More MM work: a memcg scalability improvememt"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/lru: revise the comments of lru_lock
  mm/lru: introduce relock_page_lruvec()
  mm/lru: replace pgdat lru_lock with lruvec lock
  mm/swap.c: serialize memcg changes in pagevec_lru_move_fn
  mm/compaction: do page isolation first in compaction
  mm/lru: introduce TestClearPageLRU()
  mm/mlock: remove __munlock_isolate_lru_page()
  mm/mlock: remove lru_lock on TestClearPageMlocked
  mm/vmscan: remove lruvec reget in move_pages_to_lru
  mm/lru: move lock into lru_note_cost
  mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn
  mm/memcg: add debug checking in lock_page_memcg
  mm: page_idle_get_page() does not need lru_lock
  mm/rmap: stop store reordering issue on page->mapping
  mm/vmscan: remove unnecessary lruvec adding
  mm/thp: narrow lru locking
  mm/thp: simplify lru_add_page_tail()
  mm/thp: use head for head page in lru_add_page_tail()
  mm/thp: move lru_add_page_tail() to huge_memory.c

mm/lru: revise the comments of lru_lock

Since we changed the pgdat->lru_lock to lruvec->lru_lock, it's time to fix
the incorrect comments in code.  Also fixed some zone->lru_lock comment
error from ancient time.  etc.

I struggled to understand the comment above move_pages_to_lru() (surely
it never calls page_referenced()), and eventually realized that most of
it had got separated from shrink_active_list(): move that comment back.

Link: https://lkml.kernel.org/r/1604566549-62481-20-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/lru: introduce relock_page_lruvec()

Add relock_page_lruvec() to replace repeated same code, no functional
change.

When testing for relock we can avoid the need for RCU locking if we simply
compare the page pgdat and memcg pointers versus those that the lruvec is
holding.  By doing this we can avoid the extra pointer walks and accesses
of the memory cgroup.

In addition we can avoid the checks entirely if lruvec is currently NULL.

[alex.shi@linux.alibaba.com: use page_memcg()]
Link: https://lkml.kernel.org/r/66d8e79d-7ec6-bfbc-1c82-bf32db3ae5b7@linux.alibaba.com
Link: https://lkml.kernel.org/r/1604566549-62481-19-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/lru: replace pgdat lru_lock with lruvec lock

This patch moves per node lru_lock into lruvec, thus bring a lru_lock for
each of memcg per node.  So on a large machine, each of memcg don't have
to suffer from per node pgdat->lru_lock competition.  They could go fast
with their self lru_lock.

After move memcg charge before lru inserting, page isolation could
serialize page's memcg, then per memcg lruvec lock is stable and could
replace per node lru lock.

In isolate_migratepages_block(), compact_unlock_should_abort and
lock_page_lruvec_irqsave are open coded to work with compact_control.
Also add a debug func in locking which may give some clues if there are
sth out of hands.

Daniel Jordan's testing show 62% improvement on modified readtwice case on
his 2P * 10 core * 2 HT broadwell box.
https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/

Hugh Dickins helped on the patch polish, thanks!

[alex.shi@linux.alibaba.com: fix comment typo]
Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com
[alex.shi@linux.alibaba.com: use page_memcg()]
Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com
Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rong Chen <rong.a.chen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap.c: serialize memcg changes in pagevec_lru_move_fn

Hugh Dickins' found a memcg change bug on original version: If we want to
change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize
mem_cgroup_move_account during pagevec_lru_move_fn.  The possible bad
scenario would like:

cpu 0 cpu 1
lruvec = mem_cgroup_page_lruvec()
if (!isolate_lru_page())
mem_cgroup_move_account

spin_lock_irqsave(&lruvec->lru_lock <== wrong lock.

So we need TestClearPageLRU to block isolate_lru_page(), that serializes
the memcg change.  and then removing the PageLRU check in move_fn callee
as the consequence.

__pagevec_lru_add_fn() is different from the others, because the pages it
deals with are, by definition, not yet on the lru.  TestClearPageLRU is
not needed and would not work, so __pagevec_lru_add() goes its own way.

Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: do page isolation first in compaction

Currently, compaction would get the lru_lock and then do page isolation
which works fine with pgdat->lru_lock, since any page isoltion would
compete for the lru_lock.  If we want to change to memcg lru_lock, we have
to isolate the page before getting lru_lock, thus isoltion would block
page's memcg change which relay on page isoltion too.  Then we could
safely use per memcg lru_lock later.

The new page isolation use previous introduced TestClearPageLRU() + pgdat
lru locking which will be changed to memcg lru lock later.

Hugh Dickins <hughd@google.com> fixed following bugs in this patch's early
version:

Fix lots of crashes under compaction load: isolate_migratepages_block()
must clean up appropriately when rejecting a page, setting PageLRU again
if it had been cleared; and a put_page() after get_page_unless_zero()
cannot safely be done while holding locked_lruvec - it may turn out to be
the final put_page(), which will take an lruvec lock when PageLRU.

And move __isolate_lru_page_prepare back after get_page_unless_zero to
make trylock_page() safe: trylock_page() is not safe to use at this time:
its setting PG_locked can race with the page being freed or allocated
("Bad page"), and can also erase flags being set by one of those "sole
owners" of a freshly allocated page who use non-atomic __SetPageFlag().

Link: https://lkml.kernel.org/r/1604566549-62481-16-git-send-email-alex.shi@linux.alibaba.com
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/lru: introduce TestClearPageLRU()

Currently lru_lock still guards both lru list and page's lru bit, that's
ok.  but if we want to use specific lruvec lock on the page, we need to
pin down the page's lruvec/memcg during locking.  Just taking lruvec lock
first may be undermined by the page's memcg charge/migration.  To fix this
problem, we will clear the lru bit out of locking and use it as pin down
action to block the page isolation in memcg changing.

So now a standard steps of page isolation is following:
1, get_page();         #pin the page avoid to be free
2, TestClearPageLRU(); #block other isolation like memcg change
3, spin_lock on lru_lock; #serialize lru list access
4, delete page from lru list;

This patch start with the first part: TestClearPageLRU, which combines
PageLRU check and ClearPageLRU into a macro func TestClearPageLRU.  This
function will be used as page isolation precondition to prevent other
isolations some where else.  Then there are may !PageLRU page on lru list,
need to remove BUG() checking accordingly.

There 2 rules for lru bit now:
1, the lru bit still indicate if a page on lru list, just in some
   temporary moment(isolating), the page may have no lru bit when
   it's on lru list.  but the page still must be on lru list when the
   lru bit set.
2, have to remove lru bit before delete it from lru list.

As Andrew Morton mentioned this change would dirty cacheline for a page
which isn't on the LRU.  But the loss would be acceptable in Rong Chen
<rong.a.chen@intel.com> report:
https://lore.kernel.org/lkml/20200304090301.GB5972@shao2-debian/

Link: https://lkml.kernel.org/r/1604566549-62481-15-git-send-email-alex.shi@linux.alibaba.com
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mlock: remove __munlock_isolate_lru_page()

__munlock_isolate_lru_page() only has one caller, remove it to clean up
and simplify code.

Link: https://lkml.kernel.org/r/1604566549-62481-14-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mlock: remove lru_lock on TestClearPageMlocked

In the func munlock_vma_page, comments mentained lru_lock needed for
serialization with split_huge_pages.  But the page must be PageLocked as
well as pages in split_huge_page series funcs.  Thus the PageLocked is
enough to serialize both funcs.

Further more, Hugh Dickins pointed: before splitting in
split_huge_page_to_list, the page was unmap_page() to remove pmd/ptes
which protect the page from munlock.  Thus, no needs to guard
__split_huge_page_tail for mlock clean, just keep the lru_lock there for
isolation purpose.

LKP found a preempt issue on __mod_zone_page_state which need change to
mod_zone_page_state.  Thanks!

Link: https://lkml.kernel.org/r/1604566549-62481-13-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: remove lruvec reget in move_pages_to_lru

Isolated page shouldn't be recharged by memcg since the memcg migration
isn't possible at the time.  All pages were isolated from the same lruvec
(and isolation inhibits memcg migration).  So remove unnecessary
regetting.

Thanks to Alexander Duyck for pointing this out.

Link: https://lkml.kernel.org/r/1604566549-62481-12-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/lru: move lock into lru_note_cost

We have to move lru_lock into lru_note_cost, since it cycle up on memcg
tree, for future per lruvec lru_lock replace.  It's a bit ugly and may
cost a bit more locking, but benefit from multiple memcg locking could
cover the lost.

Link: https://lkml.kernel.org/r/1604566549-62481-11-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn

Fold the PGROTATED event collection into pagevec_move_tail_fn call back
func like other funcs does in pagevec_lru_move_fn.  Thus we could save
func call pagevec_move_tail().  Now all usage of pagevec_lru_move_fn are
same and no needs of its 3rd parameter.

It's just simply the calling. No functional change.

[lkp@intel.com: found a build issue in the original patch, thanks]

Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: add debug checking in lock_page_memcg

Add a debug checking in lock_page_memcg, then we could get alarm if
anything wrong here.

Link: https://lkml.kernel.org/r/1604566549-62481-9-git-send-email-alex.shi@linux.alibaba.com
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_idle_get_page() does not need lru_lock

It is necessary for page_idle_get_page() to recheck PageLRU() after
get_page_unless_zero(), but holding lru_lock around that serves no
useful purpose, and adds to lru_lock contention: delete it.

See https://lore.kernel.org/lkml/20150504031722.GA2768@blaptop for the
discussion that led to lru_lock there; but __page_set_anon_rmap() now uses
WRITE_ONCE(), and I see no other risk in page_idle_clear_pte_refs() using
rmap_walk() (beyond the risk of racing PageAnon->PageKsm, mostly but not
entirely prevented by page_count() check in ksm.c's write_protect_page():
that risk being shared with page_referenced() and not helped by lru_lock).

Link: https://lkml.kernel.org/r/1604566549-62481-8-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap: stop store reordering issue on page->mapping

Hugh Dickins and Minchan Kim observed a long time issue which discussed
here, but actully the mentioned fix in

  https://lore.kernel.org/lkml/20150504031722.GA2768@blaptop/

was missed.

The store reordering may cause problem in the scenario:

CPU 0 CPU1
   do_anonymous_page
page_add_new_anon_rmap()
  page->mapping = anon_vma + PAGE_MAPPING_ANON
lru_cache_add_inactive_or_unevictable()
  spin_lock(lruvec->lock)
  SetPageLRU()
  spin_unlock(lruvec->lock)
/* idletacking judged it as LRU
 * page so pass the page in
 * page_idle_clear_pte_refs
 */
page_idle_clear_pte_refs
  rmap_walk
    if PageAnon(page)

Johannes give detailed examples how the store reordering could cause
trouble: "The concern is the SetPageLRU may get reorder before
'page->mapping' setting, That would make CPU 1 will observe at
page->mapping after observing PageLRU set on the page.

1. anon_vma + PAGE_MAPPING_ANON

   That's the in-order scenario and is fine.

2. NULL

   That's possible if the page->mapping store gets reordered to occur
   after SetPageLRU. That's fine too because we check for it.

3. anon_vma without the PAGE_MAPPING_ANON bit

   That would be a problem and could lead to all kinds of undesirable
   behavior including crashes and data corruption.

   Is it possible? AFAICT the compiler is allowed to tear the store to
   page->mapping and I don't see anything that would prevent it.

That said, I also don't see how the reader testing PageLRU under the
lru_lock would prevent that in the first place.  AFAICT we need that
WRITE_ONCE() around the page->mapping assignment."

[alex.shi@linux.alibaba.com: updated for comments change from Johannes]
Link: https://lkml.kernel.org/r/e66ef2e5-c74c-6498-e8b3-56c37b9d2d15@linux.alibaba.com
Link: https://lkml.kernel.org/r/1604566549-62481-7-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: remove unnecessary lruvec adding

We don't have to add a freeable page into lru and then remove from it.
This change saves a couple of actions and makes the moving more clear.

The SetPageLRU needs to be kept before put_page_testzero for list
integrity, otherwise:

  #0 move_pages_to_lru             #1 release_pages
  if !put_page_testzero
                 if (put_page_testzero())
                    !PageLRU //skip lru_lock
     SetPageLRU()
     list_add(&page->lru,)
                                         list_add(&page->lru,)

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/1604566549-62481-6-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: narrow lru locking

lru_lock and page cache xa_lock have no obvious reason to be taken one
way round or the other: until now, lru_lock has been taken before page
cache xa_lock, when splitting a THP; but nothing else takes them
together.  Reverse that ordering: let's narrow the lru locking - but
leave local_irq_disable to block interrupts throughout, like before.

Hugh Dickins point: split_huge_page_to_list() was already silly, to be
using the _irqsave variant: it's just been taking sleeping locks, so
would already be broken if entered with interrupts enabled.  So we can
save passing flags argument down to __split_huge_page().

Why change the lock ordering here? That was hard to decide.  One reason:
when this series reaches per-memcg lru locking, it relies on the THP's
memcg to be stable when taking the lru_lock: that is now done after the
THP's refcount has been frozen, which ensures page memcg cannot change.

Another reason: previously, lock_page_memcg()'s move_lock was presumed
to nest inside lru_lock; but now lru_lock must nest inside (page cache
lock inside) move_lock, so it becomes possible to use lock_page_memcg()
to stabilize page memcg before taking its lru_lock.  That is not the
mechanism used in this series, but it is an option we want to keep open.

[hughd@google.com: rewrite commit log]

Link: https://lkml.kernel.org/r/1604566549-62481-5-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: simplify lru_add_page_tail()

Simplify lru_add_page_tail(), there are actually only two cases
possible: split_huge_page_to_list(), with list supplied and head
isolated from lru by its caller; or split_huge_page(), with NULL list
and head on lru - because when head is racily isolated from lru, the
isolator's reference will stop the split from getting any further than
its page_ref_freeze().

So decide between the two cases by "list", but add VM_WARN_ON()s to
verify that they match our lru expectations.

[Hugh Dickins: rewrite commit log]

Link: https://lkml.kernel.org/r/1604566549-62481-4-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>