drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini

The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.

[  489.885525] Call Trace:
[  489.885525]  <TASK>
[  489.885526]  amdttm_bo_put+0x34/0x50 [amdttm]
[  489.885529]  amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[  489.885620]  psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[  489.885720]  psp_hw_fini+0xce/0x170 [amdgpu]
[  489.885815]  amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[  489.885960]  ? blocking_notifier_chain_unregister+0x56/0xb0
[  489.885962]  amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[  489.886049]  amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[  489.886132]  ? __pm_runtime_resume+0x60/0x90
[  489.886134]  pci_device_remove+0x3e/0xb0
[  489.886135]  __device_release_driver+0x1ab/0x2a0
[  489.886137]  driver_detach+0xf3/0x140
[  489.886138]  bus_remove_driver+0x6c/0xf0
[  489.886140]  driver_unregister+0x31/0x60
[  489.886141]  pci_unregister_driver+0x40/0x90
[  489.886142]  amdgpu_exit+0x15/0x451 [amdgpu]

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused variable ring

building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
  ‘ring’ set but not used [-Werror=unused-but-set-variable]
   81 |         struct amdgpu_ring *ring;
      |                             ^~~~

ring is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dm irq error message in gpu recover

[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.

  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3

[How]
Defer the initialization of num_types to eliminate the error logs.

Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix initialization for nbio 7.5.1

A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.

Ensure that they're set during initialization.

Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Format input and output CSC matrix

Format the input and output CSC matrix so they
look like 3x4 matrixes. This will make parsing them
much easier and allows us to quickly spot potential
mistakes.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't restrict bpc to 8 bpc

This will let us pass the kms_hdr.bpc_switch IGT
test.

The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.

Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")

This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.

v2:
 - explain why this is no longer needed (Michel)
 - refer to commit that fixed bpc fallback (Michel)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable

Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added a sysfs interface for thermal throttling

implement apu_thermal_cap r/w callback for vangogh

Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added a sysfs interface for thermal throttling

added a sysfs interface for thermal throttling, then userspace
can get/update thermal limit

Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused local variables and function

Remove a couple of local variables that are only set but never used,
also remove an static utility function that is never used in consequence
of the variable removal.

This decrease the number of -Wunused-but-set-variable warnings.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused local variables

Remove local variables that were just set but were never used. This
decrease the number of -Wunused-but-set-variable warnings.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Fix eDP for single-display iMac11,2

Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load.  This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.

Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.

This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Make kobj_type structures constant

Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make kobj_type structures constant

Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify mismatched function name

No functional modification involved.

drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:1199: warning: expecting prototype for dc_link_detect_connection_type(). Prototype was for link_detect_connection_type() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4103
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Pass proper parent for DM backlight device registration

The parent for the backlight device should be the drm-connector object,
not the PCI device.

Userspace relies on this to be able to detect which backlight class device
to use on hybrid gfx devices where there may be multiple native (raw)
backlight devices registered.

Specifically gnome-settings-daemon expects the parent device to have
an "enabled" sysfs attribute (as drm_connector devices do) and tests
that this returns "enabled" when read.

This aligns the parent of the backlight device with i915, nouveau, radeon.
Note that drivers/gpu/drm/amd/amdgpu/atombios_encoders.c also already
uses the drm_connector as parent, only amdgpu_dm.c used the PCI device
as parent before this change.

Note this is marked as a RFC because I don't have hw to test, so this
has only been compile tested! If someone can test this on actual
hw which hits the changed code path that would be great.

Link: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: downgrade log level upon SMU IF version mismatch

SMU IF version mismatch as a warning message exists widely
after asic production, however, due to this log level setting,
such mismatch warning will be caught by automation test like
IGT and reported as a fake error after checking. As such mismatch
does not break anything, to reduce confusion, downgrade it from
dev_warn to dev_info.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add ecc info query interface for umc v8_10

Support ecc info query for umc v8_10.

v2: Simplied by convert_error_address.
v3: Remove unused variable and invalid checking.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add convert_error_address function for umc v8_10

Add convert_error_address for umc v8_10.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err

bad_page_threshold controls page retirement behavior and it should be
also checked.

v2: simplify the condition of bad page handling path.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change default behavior of bad_page_threshold parameter

Ignore ras umc bad page threshold by default, GPU initialization won't
be stopped in this mode.

v2: refine the description of bad_page_threshold.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: exclude duplicate pages from UMC RAS UE count

If a UMC bad page is reserved but not freed by an application, the
application may trigger uncorrectable error repeatly by accessing the page.

v2: add specific function to do the check.
v3: remove duplicate pages, calculate new added bad page number.
v4: reuse save_bad_pages to calculate new added bad page number.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add umc retire unit element

It records how many bad pages are retired in one uncorrectable error.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: no pptable resetup on runpm exiting

It is assumed the pptable used before runpm is same as
the one used afterwards. Thus, we can reuse the stored
copy and do not need to resetup the pptable again.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the baco state setting for ArmD3 scenario

The check for baco support relies on the correct baco state.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add more fields into device info, caches sizes, etc.

AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD: important for conformance on gfx11
Other fields are exposed from IP discovery.
enabled_rb_pipes_mask_hi is added for future chips, currently 0.

Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix an illegal memory access

In the kfd_wait_on_events() function, the kfd_event_waiter structure is
allocated by alloc_event_waiters(), but the event field of the waiter
structure is not initialized; When copy_from_user() fails in the
kfd_wait_on_events() function, it will enter exception handling to
release the previously allocated memory of the waiter structure;
Due to the event field of the waiters structure being accessed
in the free_waiters() function, this results in illegal memory access
and system crash, here is the crash log:

localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0
localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082
localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000
localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0
localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64
localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002
localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698
localhost kernel: FS:  0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000
localhost kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0
localhost kernel: Call Trace:
localhost kernel: _raw_spin_lock_irqsave+0x30/0x40
localhost kernel: remove_wait_queue+0x12/0x50
localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu]
localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu]
localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: __x64_sys_ioctl+0x8e/0xd0
localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0
localhost kernel: do_syscall_64+0x33/0x80
localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
localhost kernel: RIP: 0033:0x152a4dff68d7

Allocate the structure with kcalloc, and remove redundant 0-initialization
and a redundant loop condition check.

Signed-off-by: Qu Huang <qu.huang@linux.dev>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: set and use harvest config

in early init to set harvest config if the vcn0/1 is disabled
rather than hard-code the ring attributes as before did

Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Don't allow s0ix on APUs older than Raven

APUs before Raven didn't support s0ix.  As we just relieved some
of the safety checks for s0ix to improve power consumption on
APUs that support it but that are missing BIOS support a new
blind spot was introduced that a user could "try" to run s0ix.

Plug this hole so that if users try to run s0ix on anything older
than Raven it will just skip suspend of the GPU.

Fixes: cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support")
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix incorrect active rb bitmap for gfx11

GFX v11 changes RB_BACKEND_DISABLE related registers
from per SA to global ones. The approach to query active
rb bitmap needs to be changed accordingly. Query per
SE setting returns wrong active RB bitmap especially
in the case when some of SA are disabled. With the new
approach, driver will generate the active rb bitmap
based on active SA bitmap and global active RB bitmap.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: optimize VRAM allocation when using drm buddy

Since the VRAM manager changed from drm mm to drm buddy. It's
not necessary to allocate 2MB aligned VRAM for more than 2MB
unaligned size, and then do trim. This method improves the
allocation efficiency and reduces memory fragmentation.

v2: Correct the remainder operation

Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove TOPDOWN flags when allocating VRAM in large bar system

Since VRAM manager is changed from drm mm to drm buddy, the
TOP_DOWN flag should not be set by default in the large bar system.
Removing this flag helps improve drm buddy allocator efficiency and
reduce the risk of splitting higher order block into lower order.

Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Select DRM_DISPLAY_HDCP_HELPER in amdgpu

Keeps this selection with the rest of the DRM HELPER
selection.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()

Since, hot plugging eDP displays isn't supported, it is sufficient for
us to warn about the lack of a connected display once. So, use ASSERT()
in dce110_edp_wait_for_hpd_ready() instead of DC_LOG_WARNING().

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: re-enable ac/dc on smu_v13_0_0/10

re-enable ac/dc on smu_v13_0_0/10

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add tmz support for GC 10.3.6

this patch to add tmz support for GC 10.3.6

Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: To fix sdma page fault issue for GC 11

For the MQD memory, KMD would always allocate 4K memory,
and mes scheduler would write to the end of MQD for unmap flag.

Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

msm/fbdev: fix unused variable warning with clang.

clang builds showed this:
drivers/gpu/drm/msm/msm_fbdev.c:144:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (!fbdev)
            ^~~~~~

Fixes: 3fb1f62f80a1 ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()")
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-fixes-2023-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

Fixes GEM SHMEM locking and generic fbdev hotplugging. Constifies
dma_buf kobj type.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/S6tu3gdQ0VizR+@linux-uq9g

drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()

Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the
calling fbdev implementation. Avoids a possible stale mutex with
generic fbdev code.

As indicated by its name, drm_fb_helper_prepare() prepares struct
drm_fb_helper before setting up the fbdev support with a call to
drm_fb_helper_init(). In legacy fbdev emulation, this happens next
to each other. If successful, drm_fb_helper_fini() later tear down
the fbdev device and also unprepare via drm_fb_helper_unprepare().

Generic fbdev emulation prepares struct drm_fb_helper immediately
after allocating the instance. It only calls drm_fb_helper_init()
as part of processing a hotplug event. If the hotplug-handling fails,
it runs drm_fb_helper_fini(). This unprepares the fb-helper instance
and the next hotplug event runs on stale data.

Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini()
into the fbdev implementations. Call it right before freeing the
fb-helper instance.

Fixes: 643231b28380 ("drm/fbdev-generic: Minimize hotplug error handling")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de

Merge tag 'drm-intel-next-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for the v6.3 merge window:
- Fix eDP+DSI dual panel systems
- Fix system suspend when fbdev isn't initialized
- Fix memory leaks in scatterlist
- Fix some MCR register annotations
- Fix documentation build warnings

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v8k0xyx4.fsf@intel.com

Merge tag 'amd-drm-next-6.3-2023-02-17' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.3-2023-02-17:

amdgpu:
- GC 11 fixes
- Display fixes
- Backlight cleanup
- SMU13 fixes
- SMU7 regression fix
- GFX9 sw queues fix
- AGP fix for GMC 11
- W1 warning fixes
- S/G display fixes
- Misc spelling fixes
- Driver unload fix
- DCN 3.1.4 fixes
- Display code reorg fixes
- Rotation fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217230930.64821-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

Contains fixes for DP MST and the panel orientation on an Lenovo
IdeaPad model.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+4H4C4E6cZcM9+J@linux-uq9g

dma-buf: make kobj_type structure constant

Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definition to prevent
modification at runtime.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217-kobj_type-dma-buf-v1-1-b84a3616522c@weissschuh.net

drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()

Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.

Discovered while auditing locking to write the Rust abstractions.

Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
(cherry picked from commit aa8c85affe3facd3842c8912186623415931cc72)
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>

Merge tag 'drm-misc-next-fixes-2023-02-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

Contains a number of fixes to vc4 and ivpu. The patches to the probe
helpers were cherry-picked from the regular development branch.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+S6HBmaRJNPYiBG@linux-uq9g

drm/amd/display: disable SubVP + DRR to prevent underflow

[Why&How]
Temporarily disable SubVP+DRR since Xorg has an architectural limitation
where freesync will not work in a multi monitor configuration. SubVP+DRR
requires that freesync be working.

Whether OS has variable refresh setting enabled or not, the state on
the crtc remains same unless an application requests VRR. Due to this,
there is no way to know whether freesync will actually work or not
while we are on the desktop from the kernel's perspective.

If userspace does not have a limitation with multi-display freesync (for
example wayland), then this feature can be enabled by adding a
dcfeaturemask option to amdgpu on the kernel cmdline like:

amdgpu.dcfeaturemask=0x200

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fail atomic_check early on normalize_zpos error

[Why]

drm_atomic_normalize_zpos() can return an error code when there's
modeset lock contention. This was being ignored.

[How]

Bail out of atomic check if normalize_zpos() returns an error.

Fixes: b261509952bc ("drm/amd/display: Fix double cursor on non-video RGB MPO")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: avoid unaligned access warnings

When building on OpenBSD/arm64 with clang 15, unaligned access
warnings are seen when a union is embedded inside a packed struct.

drm/amd/pm/powerplay/hwmgr/vega20_pptable.h:136:17: error: field
  smcPPTable within 'struct _ATOM_VEGA20_POWERPLAYTABLE' is less aligned
  than 'PPTable_t' and is usually due to
  'struct _ATOM_VEGA20_POWERPLAYTABLE' being packed, which can lead to
   unaligned accesses [-Werror,-Wunaligned-access]
      PPTable_t smcPPTable;
                ^

Make PPTable_t packed to avoid this.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: avoid unaligned access warnings

When building on OpenBSD/arm64 with clang 15, unaligned access
warnings are seen when a union is embedded inside a packed struct.

drm/amd/display/dmub/inc/dmub_cmd.h:941:18: error: field
  cursor_copy_src within 'struct dmub_rb_cmd_mall' is less aligned than
  'union dmub_addr' and is usually due to 'struct dmub_rb_cmd_mall'
  being packed, which can lead to unaligned accesses
  [-Werror,-Wunaligned-access]
        union dmub_addr cursor_copy_src; /**< Cursor copy address */
                        ^
drm/amd/display/dmub/inc/dmub_cmd.h:942:18: error: field cursor_copy_dst
  within 'struct dmub_rb_cmd_mall' is less aligned than
  'union dmub_addr' and is usually due to 'struct dmub_rb_cmd_mall'
  being packed, which can lead to unaligned accesses
  [-Werror,-Wunaligned-access]
        union dmub_addr cursor_copy_dst; /**< Cursor copy destination */
                        ^

Add pragma pack around dmub_addr to avoid this.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove duplicate/repeating expressions

Remove duplicate or repeating expressions in the if condition
evaluation. Issue identified using doubletest.cocci Coccinelle semantic
patch.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove duplicate/repeating expression

Remove duplicate or repeating expressions in the if condition
evaluation. Issue identified using doubletest.cocci Coccinelle semantic
patch.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make variables declaration inside ifdef guard

Make variables declaration inside ifdef guard, as they are only used
inside the same ifdef guard. This remove some of the
-Wunused-but-set-variable warning.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix excess arguments on kernel-doc

Remove arguments present on kernel-doc that are not present on the
function declaration and add the new ones if present.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add previously missing includes

Add includes that were previously missing to reduce the number of
-Wmissing-prototypes warnings.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add function prototypes to headers

Add function prototypes to headers to reduce the number of
-Wmissing-prototypes warnings.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function prototypes to headers

Add function prototypes to headers to reduce the number of
-Wmissing-prototypes warnings.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Turn global functions into static

Turn global functions that are only used locally into static ones. This
reduces the number of -Wmissing-prototypes warnings.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused _calculate_degamma_curve function

We don't use this function anywhere, therefore, remove it.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused func declaration from resource headers

The function resource_validate_ctx_update_pointer_after_copy() is
declared in resource.h but never defined, therefore, remove its
declaration from headers.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: unset initial value for tf since it's never used

In mod_color_calculate_{degamma/regamma}_params(), a tf variable is
initialized as TRANSFER_FUNCTION_SRGB but tf is only used after tf =
input->tf, therefore, better to just remove this initial value and avoid
misleading interpretations.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: camel case cleanup in color_gamma file

Rename mapUserRamp to map_user_ramp and doClamping to do_clamping

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Allocate dummy table only if needed

Only Navi1x requires dummy read workaround. Allocate the table in VRAM
only for Navi1x.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: enable DPG when disabling plane for phantom pipe"

This reverts commit d47d2f9392f69f069c31d60ac3088471b1e1c7d4.

regression detected by the change. Revert until
fix is available.

Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Promote DAL to 3.2.223

This version brings along the following:
- Move domain power control to DMCUB for DCN314
- Enable P-state validation check for DCN314
- Add support for multiple overlay planes
- Fixes in prefetch, k1 k2 divider programming and more
- Code cleanup

Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: temporary fix for page faulting

This reverts a part of the
commit 826e7ffaf079c72607bf3199d4e19730eaf8ca00
 ("drm/amd/display: [FW Promotion] Release 0.0.153.0")

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta<ayugupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: upstream link_dp_dpia_bw.c

[WHY & HOW]
- make link_dp_dpia_bw.c available for linux.
- add the verify link peak bw
- clean up code and comment format.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable HUBP/DPP PG on DCN314 for now

[Why]
The DMCUB implementation required to workaround corruption is
not currently stable and may cause intermittent corruption or hangs.

[How]
Disable PG until the sequence is stable.

Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean code-style issues in dcn30_set_mpc_shaper_3dlut

This function has many conditions and all code style issues (identation,
missing braces, etc.) make reading it really annoying.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: ident braces in dcn30_acquire_post_bldn_3dlut correctly

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: fix warning during suspend

Freeing memory was warned during suspend.
Move the self test out of suspend.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2151825
Cc: jfalempe@redhat.com
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915: Fix system suspend without fbdev being initialized

If fbdev is not initialized for some reason - in practice on platforms
without display - suspending fbdev should be skipped during system
suspend, fix this up. While at it add an assert that suspending fbdev
only happens with the display present.

This fixes the following:

[   91.227923] PM: suspend entry (s2idle)
[   91.254598] Filesystems sync: 0.025 seconds
[   91.270518] Freezing user space processes
[   91.272266] Freezing user space processes completed (elapsed 0.001 seconds)
[   91.272686] OOM killer disabled.
[   91.272872] Freezing remaining freezable tasks
[   91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[   91.659622] BUG: kernel NULL pointer dereference, address: 00000000000001c8
[   91.659981] #PF: supervisor write access in kernel mode
[   91.660252] #PF: error_code(0x0002) - not-present page
[   91.660511] PGD 0 P4D 0
[   91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI
[   91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54
[   91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown
[   91.661680] RIP: 0010:mutex_lock+0x19/0x30
[   91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40
[   91.662840] RSP: 0018:ffffa1e8011ffc08 EFLAGS: 00010246
[   91.663087] RAX: 0000000000000000 RBX: 00000000000001c8 RCX: 0000000000000000
[   91.663440] RDX: ffff8be455eb0000 RSI: 0000000000000001 RDI: 00000000000001c8
[   91.663802] RBP: ffff8be459440000 R08: ffff8be459441f08 R09: ffffffff8e1432c0
[   91.664167] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[   91.664532] R13: 00000000000001c8 R14: 0000000000000000 R15: ffff8be442f4fb20
[   91.664905] FS:  00007f28ffc16740(0000) GS:ffff8be4bb900000(0000) knlGS:0000000000000000
[   91.665334] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   91.665626] CR2: 00000000000001c8 CR3: 0000000114926006 CR4: 0000000000770ee0
[   91.665988] PKRU: 55555554
[   91.666131] Call Trace:
[   91.666265]  <TASK>
[   91.666381]  intel_fbdev_set_suspend+0x97/0x1b0 [i915]
[   91.666738]  i915_drm_suspend+0xb9/0x100 [i915]
[   91.667029]  pci_pm_suspend+0x78/0x170
[   91.667234]  ? __pfx_pci_pm_suspend+0x10/0x10
[   91.667461]  dpm_run_callback+0x47/0x150
[   91.667673]  __device_suspend+0x10a/0x4e0
[   91.667880]  dpm_suspend+0x134/0x270
[   91.668069]  dpm_suspend_start+0x79/0x80
[   91.668272]  suspend_devices_and_enter+0x11b/0x890
[   91.668526]  pm_suspend.cold+0x270/0x2fc
[   91.668737]  state_store+0x46/0x90
[   91.668916]  kernfs_fop_write_iter+0x11b/0x200
[   91.669153]  vfs_write+0x1e1/0x3a0
[   91.669336]  ksys_write+0x53/0xd0
[   91.669510]  do_syscall_64+0x58/0xc0
[   91.669699]  ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[   91.669980]  ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[   91.670278]  ? syscall_exit_to_user_mode+0x17/0x40
[   91.670524]  ? do_syscall_64+0x67/0xc0
[   91.670717]  ? __irq_exit_rcu+0x3d/0x140
[   91.670931]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[   91.671202] RIP: 0033:0x7f28ffd14284

v2: CC stable. (Jani)

Fixes: f8cc091e0530 ("drm/i915/fbdev: suspend HPD before fbdev unregistration")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015
Reported-and-tested-by: iczero <iczero@hellomouse.net>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: iczero <iczero@hellomouse.net>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208114300.3123934-2-imre.deak@intel.com
(cherry picked from commit 9542d708409a41449e99c9a464deb5e062c4bee2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix GEN8_MISCCPCTL

Register 0x9424 is not replicated on any platform, so it shouldn't be
declared with REG_MCR(). Declaring it with _MMIO() is basically
duplicate of the GEN7 version, so just remove the GEN8 and change all
the callers to use the right functions.

Old versions of the gen8 bspec page used to contain a table with MCR
registers, apparently implying 0x9400 - 0x94ff registers were
replicated. However that table went away and there is no information
related to the ranges for gen8 anymore. Moreover the current behavior of
the driver wouldn't do anything special for 0x9424 since there is no
equivalent table in intel_gt_mcr.c: the driver would just fallback to
intel_uncore_{read,write}(). Therefore, do not care about the possible
special case for gen8 and just use the register as non-MCR for all the
platforms.

One place doing read + write is also converted to intel_uncore_rmw().

v2: Reword commit message adding the justification wrt gen8

Fixes: a9e69428b1b4 ("drm/i915: Define MCR registers explicitly")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206165410.3056073-1-lucas.demarchi@intel.com
(cherry picked from commit 869bace73ae2b4227e57ee3fd994bfa7d4808938)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pvc: Annotate two more workaround/tuning registers as MCR

XEHPC_LNCFMISCCFGREG0 and XEHPC_L3SCRUB are both in MCR register ranges
on PVC (with HALFBSLICE and L3BANK replication respectively), so they
should be explicitly declared as MCR registers and use MCR-aware
workaround handlers.

The workarounds/tuning settings should still be applied properly on PVC
even without the MCR annotation, but readback verification on
CONFIG_DRM_I915_DEBUG_GEM builds could potentitally give false positive
"workaround lost on load" warnings on parts fused such that a unicast
read targets a terminated register instance.

Fixes: a9e69428b1b4 ("drm/i915: Define MCR registers explicitly")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-1-matthew.d.roper@intel.com
(cherry picked from commit 4039e44237e8ebb06f0e4af549fbedf7c41df9db)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: set default backlight controller index

With backlight controller set to -1 in intel_panel_init_alloc() to
distinguish uninitialized values, and controller later being set only if
it's present in VBT, we can end up with -1 for the controller:

    [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation
    frequency 200 Hz, active high, min brightness 0, level 255,
    controller 4294967295

There's no harm if it happens on platforms that ignore controller due to
only one backlight controller being present, like on VLV above, but play
it safe.

Fixes: bf38bba3e7d6 ("drm/i915: Try to use the correct power sequencer intiially on bxt/glk")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207111626.1839645-1-jani.nikula@intel.com
(cherry picked from commit a0dcb06d29d9e477e1984dc3859e61568361fc1a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Pick the backlight controller based on VBT on ICP+

Use the second backlight controller on ICP+ if the VBT asks
us to do so.

On pre-MTP we also check the chicken bit to make sure the
pins have been correctly muxed by the firmware.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b33771546309b46b681388b3540b69a75a0e2e69)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Populate encoder->devdata for DSI on icl+

We now have some eDP+DSI dual panel systems floating around
where the DSI panel is the secondary LFP and thus needs to
consult "panel type 2" in VBT in order to locate all the
other panel type dependant stuff correctly.

To that end we need to pass in the devdata to
intel_bios_init_panel_late(), otherwise it'll just assume
we want the primary panel type. So let's try to just populate
the vbt.ports[] stuff and encoder->devdata for icl+ DSI
panels as well.

We can't do this on older platforms as there we risk a DSI
port aliasing with a HDMI/DP port, which is a totally legal
thing as the DSI ports live in their own little parallel
universe.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit ba00eb6a4bfbe5194ddda50730aba063951f8ce0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix VBT DSI DVO port handling

Turns out modern (icl+) VBTs still declare their DSI ports
as MIPI-A and MIPI-C despite the PHYs now being A and B.
Remap appropriately to allow the panels declared as MIPI-C
to work.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 118b5c136c04da705b274b0d39982bb8b7430fc5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix memory leaks in scatterlist

This patch fixes memory leaks on error escapes in i915_scatterlist.c

Fixes: c3bfba9a2225 ("drm/i915: Check for integer truncation on scatterlist creation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201232801.123684-1-matthew.s.atwood@intel.com
(cherry picked from commit 389b9d91dd57fd2d4428bd0c19ed1cacf2fe918d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/doc: Escape wildcard in method names

Stephen Rothwell reported htmldocs warnings:

Documentation/gpu/i915:64: drivers/gpu/drm/i915/gt/intel_workarounds.c:32: WARNING: Inline emphasis start-string without end-string.
Documentation/gpu/i915:64: drivers/gpu/drm/i915/gt/intel_workarounds.c:57: WARNING: Inline emphasis start-string without end-string.
Documentation/gpu/i915:64: drivers/gpu/drm/i915/gt/intel_workarounds.c:66: WARNING: Inline emphasis start-string without end-string.

Escape wildcards in *_ctx_workarounds_init(), *_gt_workarounds_init(), and
*_whitelist_build() to fix above warnings.

Link: https://lore.kernel.org/linux-next/20230203134622.0b6315b9@canb.auug.org.au/
Fixes: 0c3064cf33fbfa ("drm/i915/doc: Document where to implement register workarounds")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203100215.31852-2-bagasdotme@gmail.com
(cherry picked from commit ec852e3c88d5caa457557406c0c787b56c36dffb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5

Another Lenovo convertable where the panel is installed landscape but is
reported to the kernel as portrait.

Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214164659.3583-1-darrell.kavanagh@gmail.com

drm/amd/display: Add support for multiple overlay planes

[Why]
We only allowed 1 overlay plane. But now some ASICS can support multiple
overlay planes.

[How]
Use max_slave_planes as the number of overlays we can support.

Also since we cannot draw cursor over a video plane, we need to make
sure that we reject commits where the topmost plane is a video plane
(overlay only).

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move public dc link function implementation to dc_link_exports

[why]
Link is a subcomponent in dc. DM should be aware of dc link structure
as one of the abstracted objects maintained by dc. However it should
have no idea of the existence of a link component in dc dedicated to
maintain the states of dc link structure. As such we are moving link interfaces
out of dc_link.h and directly added to dc.h. We are grandually fading out
the explicit inclusion of dc_link header and eventually delete it.

On dc side, since link is a subcomponent behind dc interfaces, it is not
a good idea to implement dc interfaces in each individual subcomponent
of link which is already a subcomponent of dc. So we are decoupling it
by implementing a dc_link_exports in dc. This file will be a thin
translation layer that breaks the dependency so link is able to make
interface changes without breaking DM.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update Z8 SR exit/enter latencies

[Why]
Request from HW team to update the latencies to the new measured values.

[How]
Update the values in the bounding box.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix FreeSync active bit issue

[Why]
The FreeSync active bit unconditionally set in HDMI VSIF.

[How]
Set this bit to true when FAMS is enable on desktop.

Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable unbounded request mode during rotation

[why]
HUBP_UNBOUNDED_REQ_MODE being enabled while the display is rotated (eg.
going from Portrait mode to Landscape mode) appears to be causing a
p-state hang, specifically during full screen mode on the Tiktok PC app.
Unbounded request mode doesn't appear to be supported with rotation
configs, hence disabling it.

[how]
Within DML, modified unbounded request mode to be configured only when
the rotation angle of the plane is 0.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nasir Osman<nasir.osman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Revert programming GRBM_GFX_* in RLCG interface to support GFX9

[Why]
Regression of commit 72fef4980ddf ("drm/amdgpu: Remove writing GRBM_GFX_CNTL in RLCG interface under SRIOV") on GFX9.
According to GFX9 VF using different method to access GC registers including MMIO(direct) and RLCG(indirect),
removing GRBM_GFX_* writing would make PIPE/ME/VM/QUEUE selection chaos leading to some OCL benchmark failure.

For example,
using RLCG interface to program GRBM_GFX_CNTL/INDEX for selecting MEC(actually the value is only in scratch2/3),
then using MMIO directly program a MEC register in VF driver.
The register programming are invalid due to GC switched to incorrect ME.

[How]
With checking RLCG accessing flag, keep writing GRBM_GFX_* as a legacy way.
But it is still skipped on GFX10+ to avoid violation occurrence.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove the unused variable pre_connection_type

Variable pre_connection_type is not effectively used, so delete it.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4031
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove the unused variable ds_port

Variable ds_port is not effectively used, so delete it.

drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:280:35: warning: variable ‘ds_port’ set but not used.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4030
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove stutter only configurations

[why]
Newer ASICs such as DCN314 needs to allow for both self refresh and mem
clk switching rather than just self refresh only. Otherwise, we can see
some p-state hangs on ASICs that do support mem clk switching.

[how]
Added an allow_self_refresh_only flag for dcn30_internal_validate_bw
and created a validate_bw method for DCN314 with the allow_self_refresh_only
flag set to false (to support mem clk switching).

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nasir Osman <nasir.osman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix video glitch while drag window in PSR-SU

[Why]
Dmub will cache the video position data during PSR-SU enable.
The dmub will use an outdated MPO video position if user try
to drag the video window and it will cause video glitch.

[How]
Disable the PSR-SU temporarily while user drag the video window.
The PSR-SU will be re-enabled after the video window is stable.

Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:145 get_ddc_line() warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:201 dc_link_construct_phy() warn: inconsistent indenting

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4026
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify bool conversion

./drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c:1610:68-73: WARNING: conversion to bool not needed here

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4025
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add NULL pointer check

[Why]
In virtual link use case, link->ddc could be NULL.

[How]
Add null pointer check to avoid undefined behavior.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: on dp link lost event toggle dpms for master pipe only

[why]
We mistakenly toggle dpms state for non master pipe when handling
link lost. A non master pipe doesn't connect to a backend. So it is
toggling dpms for non master is undefined and caused NULL pointer
dereference.

[how]
Add helper functions to find an array of active master pipes for current
link and only toggle DPMS for active master pipes connected to the link.
Add assert in case we get called to program dpms with non master pipe.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Extract temp drm mst deallocation wa into its own function

[why]
A recent change was made to implement temporary workaround due DRM
update in MST interfaces. The workaround is added into our generic
deallocation MST sequence.

This ticket is to extract this temporary workaround into its own function so
it is differentiated from our generic sequence.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable DPG when disabling plane for phantom pipe

[Why]
In disable_dangling_plane, for phantom pipes, we enable OTG so
disable programming gets the double buffer update.  But this
causes an underflow to occur.

[How]
Enable DPG prior to enabling OTG.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Correct bw_params population"

This reverts commit f5df7725e38853b5b07b7ab41017916f1e5b4e57

[Why]
This commit causes corruption when viewing a P010
video clip on a 300Hz eDP

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: do not set RX back to SST mode for non 0 mst stream count

[why]
a recent regression has caused us to mistakenly switch RX back to SST mode
when there are remaining mst stream enabled to the link. We are missing
a condition check for stream count before setting RX back to SST mode.

[how]
Add stream count check condition back and do some further refactor so the
logic is easier to understand to prevent future coding error in this sequence.

Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix prefetch vratio check

[Why & How]
- For prefetch max vratio check, use the calculated
  prefetch bandwidth from dml32_CalculatePrefetchSchedule
  instead of max prefetch bandwidth
- Also multiply prefetch bandwidth by VRatio since scaling
  is not considered one calculating require prefetch bw

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>