drm/i915/gem: Check that the context wasn't closed during setup

As setup takes a long time, the user may close the context during the
construction of the execbuf. In order to make sure we correctly track
all outstanding work with non-persistent contexts, we need to serialise
the submission with the context closure and mop up any leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303080546.1140508-3-chris@chris-wilson.co.uk

drm/i915/gt: Prevent allocation on a banned context

If a context is banned even before we submit our first request to it,
report the failure before we attempt to allocate any resources for the
context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303080546.1140508-2-chris@chris-wilson.co.uk

drm/i915/gem: Consolidate ctx->engines[] release

Use the same engine_idle_release() routine for cleaning all old
ctx->engine[] state, closing any potential races with concurrent execbuf
submission.

v2ish: Use the ce->pin_count to close the execbuf gap.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1241
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303080546.1140508-1-chris@chris-wilson.co.uk

drm/i915: Polish CHV .load_luts() a bit

It irks me to use crtc_state_is_legacy_gamma() inside the guts
of the CHV color management code. Let's get rid of it and instead
just consult cgm_mode to figure out if we want to enable the pipe
gamma or the CGM gamma.

Also CHV display engine is based on i965/g4x so we should fall back
to the i965 path when the CGM gamma is not used.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107151725.10507-3-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>

drm/i915/gvt: only include intel_gvt.h where needed

i915_drv.c is the only caller.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-3-jani.nikula@intel.com

drm/i915/gvt: make intel_gvt_active internal to intel_gvt

Nobody else uses it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-2-jani.nikula@intel.com

drm/i915/vgpu: improve vgpu abstractions

Add intel_vgpu_register() abstraction, rename i915_detect_vgpu() to
intel_vgpu_detect() to match other function naming, un-inline
intel_vgpu_active(), intel_vgpu_has_full_ppgtt() and
intel_vgpu_has_huge_gtt() to reduce header interdependencies.

The i915_vgpu.[ch] filename and intel_vgpu_ prefix discrepancy remains.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-1-jani.nikula@intel.com

drm/i915: Fix kbuild test robot build error

has_transcoder() was unused because function which was using it,
intel_display_capture_error_state() defined under
CONFIG_DRM_I915_CAPTURE_ERROR.
Moving has_transcoder() to under CONFIG_DRM_I915_CAPTURE_ERROR.
No functional change.

Fixes: d54c1a513c48 ("drm/i915: Fix broken transcoder err state")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227175147.11362-1-anshuman.gupta@intel.com

drm/i915/hdcp: conversion to struct drm_device based logging macros.

Converts remaining instances of the printk based logging macros in
i915/display/intel_hdcp.c with the struct drm_device based macros
manually.

This is continuation of commit 65833c463886 ("drm/i915/hdcp: conversion
to struct drm_device based logging macros.")

v2:
  i915_dev_priv is used instead of drm_device for reusability [JaniN]
v3:
  Made it independent from the series.
  once instance of dev_priv naming is changed to i915 [Jani N]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212123007.6659-1-ramalingam.c@intel.com

drm/i915: move watermark structs more towards usage

Shrink i915_drv.h a bit by moving watermark structs where they are
needed.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227170047.31089-3-jani.nikula@intel.com

drm/i915: Fix doclinks

Update locations for

./drivers/gpu/drm/i915/i915_vma.h:1: warning: 'Virtual Memory Address' not found
./drivers/gpu/drm/i915/i915_gem_gtt.c:1: warning: 'Global GTT views' not found

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302145254.520447-1-chris@chris-wilson.co.uk

drm/i915/dmc: Use firmware v2.06 for TGL

New firmware contains minor fixes around context restore.

Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227235005.18706-1-jose.souza@intel.com

drm/i915: fix documentation build after rename

intel_csr.c was moved under display.

Fixes: 06d3ff6e7451 ("drm/i915: move intel_csr.[ch] under display/")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302170218.16496-1-jani.nikula@intel.com

drm/i915/huc: update TGL HuC to v7.0.12

Update to the latest available TGL HuC, which includes changes required
by the media team.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229012042.27487-1-daniele.ceraolospurio@intel.com

drm/i915/execlists: Check the sentinel is alone in the ELSP

We only use sentinel requests for "preempt-to-idle" passes, so assert
that they are the only request in a new submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302085812.4172450-12-chris@chris-wilson.co.uk

drm/i915/perf: Reintroduce wait on OA configuration completion

We still need to wait for the initial OA configuration to happen
before we enable OA report writes to the OA buffer.

Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356
Testcase: igt/perf/stream-open-close
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302085812.4172450-7-chris@chris-wilson.co.uk

drm/i915/tgl: Add Wa number to WaAllowPMDepthAndInvocationCountAccessFromUMD

Just to make easier to check that the Wa was implemetend when
comparing to the number in BSpec.

BSpec: 52890
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-10-jose.souza@intel.com

drm/i915/tgl: Add note about Wa_1409142259

Different issues with the same fix, so justing adding
Wa_1409142259, Wa_1409252684, Wa_1409217633, Wa_1409207793,
Wa_1409178076 and 1408979724 to the comment so other devs can check if
this Was were implemetend with a simple grep.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-8-jose.souza@intel.com

drm/i915/tgl: Fix the Wa number of a fix

The Wa number for this fix is Wa_1607087056 the BSpec bug id is
1607087056, just updating to match BSpec.

BSpec: 52890
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-7-jose.souza@intel.com

drm/i915/tgl: Add note about Wa_1607063988

This issue workaround in Wa_1607063988 has the same fix as
Wa_1607138336, so just adding a note in the code.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-6-jose.souza@intel.com

drm/i915/tgl: Add note to Wa_1607297627

Add note about the confliting information in BSpec about this WA.

BSpec: 52890
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-5-jose.souza@intel.com

drm/i915/tgl: Extend Wa_1606931601 for all steppings

According to BSpec. Wa_1606931601 applies for all TGL steppings.
This patch moves the WA implementation out of A0 only block of
rcs_engine_wa_init().

The WA is has also been referred to by an alternate name
Wa_1607090982.

Bspec: 46045, 52890

Fixes: 3873fd1a43c7 ("drm/i915: Use engine wa list for Wa_1607090982")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-4-jose.souza@intel.com

drm/i915/tgl: Add Wa_1409085225, Wa_14010229206

Disable Push Constant buffer addition for TGL.

v2: typos, add additional Wa reference
v3: use REG_BIT macro, move to rcs_engine_wa_init, clean up commit
message.

Bspec: 52890
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-3-jose.souza@intel.com

drm/i915/tgl: Implement Wa_1806527549

This will whitelist the HIZ_CHICKEN register so mesa can disable the
optimizations and avoid hang when using D16_UNORM.

v2: moved to the right place and used the right function() (Chris)

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-2-jose.souza@intel.com

drm/i915/tgl: Implement Wa_1409804808

This workaround the CS not done issue on PIPE_CONTROL.

v2:
- replaced BIT() by REG_BIT() in all GEN7_ROW_CHICKEN2() bits
- shortened the name of the new bit

BSpec: 52890
BSpec: 46218
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227220101.321671-1-jose.souza@intel.com

drm/i915: Unify the DPLL ref clock frequency tracking

All platforms using the shared DPLL framework use 3 reference clocks for
their DPLLs: SSC, non-SSC and DSI. For a more unified way across
platforms store the frequency of these ref clocks as part of the DPLL
global state. This also allows us to keep the HW access reading out the
ref clock value separate from the DPLL frequency calculation that
depends on the ref clock.

For now add only the SSC and non-SSC ref clocks, as the pre-ICL DSI code
has its own logic for calculating DPLL parameters instead of the shared
DPLL framework.

v2:
- Apply the ICL combo PHY PLL ref_clock/2 adjustment during the
  frequency->PLL param conversion direction as well. (CI shards)
- s/kHZ/kHz/ (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228153328.17842-1-imre.deak@intel.com

drm/i915/hsw: Use the read-out WRPLL/SPLL state instead of reading out again

Instead of reading out the WRPLL/SPLL control values from HW, we can use
the DPLL state that was already read out, or swapped-to.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-13-imre.deak@intel.com

drm/i915/skl, cnl: Split out the WRPLL/LCPLL frequency calculation

Split out the PLL parameter->frequency conversion logic for each type of
PLL for symmetry with their corresponding inverse conversion functions.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-12-imre.deak@intel.com

drm/i915/hsw: Split out the WRPLL, LCPLL, SPLL frequency calculation

Split out the PLL parameter->frequency conversion logic for each type of
PLL for symmetry with their corresponding inverse conversion functions.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-11-imre.deak@intel.com

drm/i915/hsw: Split out the SPLL parameter calculation

For consistency with the WRPLL/LCPLL parameter calculation functions,
split out the SPLL specific logic to its own function.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-10-imre.deak@intel.com

drm/i915/hsw: Rename the get HDMI/DP DPLL funcs to get WRPLL/LCPLL

The types of PLLs used for HDMI/DP on HSW are WRPLL/LCPLL accordingly,
so use these names to align better with the rest of WRPLL/LCPLL function
names elsewhere.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-9-imre.deak@intel.com

drm/i915/skl: Parametrize the DPLL ref clock instead of open-coding it

For clarity keep the SKL DPLL ref clock in a variable instead of
open-coding it. Store the value in kHZ units as done on other platforms.
This allows us in a later patch to keep track of the DPLL ref clock in a
more unified way across all platforms.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-8-imre.deak@intel.com

drm/i915: Move DPLL frequency calculation to intel_dpll_mgr.c

Move all the DPLL params->DPLL frequency conversion functions to
intel_dpll_mgr.c where the corresponding inverse conversions are.

The GEN11+ TBT PLL outputs multiple frequencies and for selecting the
one in use we need to check the DDI CLK mux. As part of the DDI clock
logic this selection is kept in intel_ddi.c.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-7-imre.deak@intel.com

drm/i915/hsw: Use the DPLL ID when calculating DPLL clock

Instead of converting DPLL ID to CLK_SEL to identify the DPLL use the
DPLL ID directly for this.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-6-imre.deak@intel.com

drm/i915: Move the DPLL vfunc inits after the func defines

Move the per-platform DPLL and DPLL-manager vfunc initializations right
after the corresponding function definitions.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-5-imre.deak@intel.com

drm/i915: Keep the global DPLL state in a DPLL specific struct

For clarity add a new DPLL specific struct to the i915 device struct and
move all DPLL fields into it. Accordingly remove the dpll_ prefixes, as
the new struct already provides the required namespacing.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-4-imre.deak@intel.com

drm/i915: Move DPLL HW readout/sanitize fns to intel_dpll_mgr.c

Move the HW readout/sanitize functions to intel_dpll_mgr.c which
contains the rest of shared DPLL functionality.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-3-imre.deak@intel.com

drm/i915: Fix bounds check in intel_get_shared_dpll_id()

Fix an off-by-one error in the upper-bound check and while at it clear
up a bit the function.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-2-imre.deak@intel.com

drm/i915: Use intel_plane_data_rate for min_cdclk calculation

There seems to be a bit of confusing redundancy in a way, how
plane data rate/min cdclk are calculated.
In fact both min cdclk, pixel rate and plane data rate are all
part of the same formula as per BSpec.

However currently we have intel_plane_data_rate, which is used
to calculate plane data rate and which is also used in bandwidth
calculations. However for calculating min_cdclk we have another
piece of code, doing almost same calculation, but a bit differently
and in a different place. However as both are actually part of same
formula, probably would be wise to use plane data rate calculations
as a basis anyway, thus avoiding code duplication and possible bugs
related to this.

Another thing is that I've noticed that during min_cdclk calculations
we account for plane scaling, while for plane data rate, we don't.
crtc->pixel_rate seems to account only for pipe ratio, however it is
clearly stated in BSpec that plane data rate also need to account
plane ratio as well.

So what this commit does is:
- Adds a plane ratio calculation to intel_plane_data_rate
- Removes redundant calculations from skl_plane_min_cdclk which is
  used for gen9+ and now uses intel_plane_data_rate as a basis from
  there as well.

v2: - Don't use 64 division if not needed(Ville Syrjälä)
    - Now use intel_plane_pixel_rate as a basis for calculations both
      at intel_plane_data_rate and skl_plane_min_cdclk(Ville Syrjälä)

v3: - Again fix the division macro
    - Fix plane_pixel_rate to pixel_rate at intel_plane_pixel_rate
      callsites

v4: - Renamed skl_plane_ratio function back(Ville Syrjälä)

v5: - Don't precalculate plane pixel rate for invisible plane,
      check for visibility first, as in invisible case it will
      have dst_w and dst_h equal to zero, causing divide error.

v6: - Removed useless warn in intel_plane_pixel_rate(Ville Syrjälä)
    - Fixed alignment in intel_plane_data_rate(Ville Syrjälä)
    - Changed pixel_rate type to be unsigned int in
      skl_plane_min_cdclk(Ville Syrjälä)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227150935.2107-1-stanislav.lisovskiy@intel.com

drm/i915: Use a sentinel to terminate the dbuf slice arrays

Make life a bit simpler by sticking a sentinel at the end of
the dbuf slice arrays. This way we don't need to pass in the
size. Also unify the types (u8 vs. u32) for active_pipes.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Add missing commas to dbuf tables

The preferred style is to sprinkle commas after each array and
structure initialization, whether or not it happens to be the
last element/member (only exception being sentinel entries which
never have anything after them). This leads to much prettier
diffs if/when new elements/members get added to the end of the
initialization. We're not bound by some ancient silly mandate
to omit the final comma.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove garbage WARNs

These things can never happen, and probably we'd have oopsed long ago
if they did. Just get rid of this pointless noise in the code.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Handle some leftover s/intel_crtc/crtc/

Switch to the preferred 'crtc' name for our crtc variables.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix 90/270 degree rotated RGB565 src coord checks

Supposedly both src coordinates have to even when doing 90/270
degree rotation with RGB565. This is definitely true for the
X coordinate (we just get a black screen when it is odd). My
experiments didn't show any misbehaviour with an odd
Y coordinate, but let's trust the spec and reject that one
as well.

v2: Ignore ccs hsub/vsub
v3: Clarify the CCS special (Maarten)
    Deal with tgl+ CCS modifiers where we
    do need to look at hsub/vsub

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228160523.1064-1-ville.syrjala@linux.intel.com

drm/i915/dp: Use BDB_GENERAL_FEATURES VBT block info for builtin panel-orientation

Some devices with a builtin panel have the panel mounted upside down,
this is indicated by the rotate_180 bit in the BDB_GENERAL_FEATURES VBT
block.

We store this info in dev_priv->vbt.orientation, use this to set the
connector's orientation property so that fbcon and userspace will show
the image the right way up on devices with an upside-down mounted panel.

This fixes the image being upside-down on a Teclast X89 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228114110.187792-3-hdegoede@redhat.com

drm/i915/dsi: Remove readback of panel orientation on BYT / CHT

Commit 82daca297506 ("drm/i915: Add "panel orientation" property to the
panel connector, v6.") uses hardware state readback to determine if the
GOP is rotating the image by 180 degrees to compensate for upside-down
mounted panels.

When I wrote that commit I tried to find the VBT bits the GOP used to
decide to rotate the image, but I could not find them. Back then I only
looked at the rotation bits in struct mipi_config and these read 0 on
the 1 BYT device I have with an upside-down mounted panel
(a GP-electronic T701 tablet). While working on a similar problem on a
BYT device with an eDP panel I noticed that the new
intel_dsi_get_panel_orientation() helper which gets used on newer
SoCs (Apollo-Lake, etc.) checks the rotate_180 bit in the
BDB_GENERAL_FEATURES VBT block.

I've checked and this bit indeed is set on the GP-electronic T701 tablet,
so using the generic intel_dsi_get_panel_orientation() helper there does
the right thing without needing any extra readback of hw state.

This commit removes the special handling of the panel orientation for
DSI panels on BYT/CHT devices, bringing the handling in line with the
handling of DSI panels on other devices.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228114110.187792-2-hdegoede@redhat.com

drm/i915: remove unused orig_clock i915 member

Unused since commit f97108d1d0fa ("drm/i915: add dynamic performance
control support for Ironlake"). That's a little over ten years. Good
riddance.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227170047.31089-2-jani.nikula@intel.com

drm/i915: add i915_ioc32.h for compat

Keep reducing i915_drv.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227170047.31089-1-jani.nikula@intel.com

drm/i915/dram: hide the dram structs better

Finish the job started in d28ae3b28187 ("drm/i915: split out
intel_dram.[ch] from i915_drv.c") by moving struct dram_dimm_info and
dram_channel_info inside intel_dram.c, the only user of the structs.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227145359.17543-1-jani.nikula@intel.com

drm/i915/crc: move pipe_crc from drm_i915_private to intel_crtc

Having an array pipe_crc[I915_MAX_PIPES] in struct drm_i915_private
should be an obvious clue this should be located in struct intel_crtc
instead. Make it so.

As a side-effect, fix some errors in indexing pipe_crc with both pipe
and crtc index. And, of course, reduce the size of i915_drv.h.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227161253.15741-1-jani.nikula@intel.com

drm/i915/gt: Expose heartbeat interval via sysfs

We monitor the health of the system via periodic heartbeat pulses. The
pulses also provide the opportunity to perform garbage collection.
However, we interpret an incomplete pulse (a missed heartbeat) as an
indication that the system is no longer responsive, i.e. hung, and
perform an engine or full GPU reset. Given that the preemption
granularity can be very coarse on a system, we let the sysadmin override
our legacy timeouts which were "optimised" for desktop applications.

The heartbeat interval can be adjusted per-engine using,

/sys/class/drm/card?/engine/*/heartbeat_interval_ms

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228131716.3243616-7-chris@chris-wilson.co.uk

drm/i915/gt: Expose preempt reset timeout via sysfs

After initialising a preemption request, we give the current resident a
small amount of time to vacate the GPU. The preemption request is for a
higher priority context and should be immediate to maintain high
quality of service (and avoid priority inversion). However, the
preemption granularity of the GPU can be quite coarse and so we need a
compromise.

The preempt timeout can be adjusted per-engine using,

/sys/class/drm/card?/engine/*/preempt_timeout_ms

and can be disabled by setting it to 0.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228131716.3243616-6-chris@chris-wilson.co.uk

drm/i915/gt: Expose reset stop timeout via sysfs

When we allow ourselves to sleep before a GPU reset after disabling
submission, even for a few milliseconds, gives an innocent context the
opportunity to clear the GPU before the reset occurs. However, how long
to sleep depends on the typical non-preemptible duration (a similar
problem to determining the ideal preempt-reset timeout or even the
heartbeat interval). As this seems of a hard policy decision, punt it to
userspace.

The timeout can be adjusted using

/sys/class/drm/card?/engine/*/stop_timeout_ms

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228131716.3243616-5-chris@chris-wilson.co.uk

drm/i915/gt: Expose busywait duration to sysfs

We busywait on an inflight request (one that is currently executing on
HW, and so might complete quickly) prior to setting up an interrupt and
sleeping. The trade off is that we keep an expensive CPU core busy in
order to avoid wake up latency: where that trade off should lie is best
left to the sysadmin.

The busywait mechanism can be compiled out with

./scripts/config --set-val DRM_I915_SPIN_REQUEST 0

The maximum busywait duration can be adjusted per-engine using,

/sys/class/drm/card?/engine/*/ms_busywait_duration_ns

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228131716.3243616-4-chris@chris-wilson.co.uk

drm/i915/gt: Expose timeslice duration to sysfs

Execlists uses a scheduling quantum (a timeslice) to alternate execution
between ready-to-run contexts of equal priority. This ensures that all
users (though only if they of equal importance) have the opportunity to
run and prevents livelocks where contexts may have implicit ordering due
to userspace semaphores.

The timeslicing mechanism can be compiled out with

./scripts/config --set-val DRM_I915_TIMESLICE_DURATION 0

The timeslice duration can be adjusted per-engine using,

/sys/class/drm/card?/engine/*/timeslice_duration_ms

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228131716.3243616-3-chris@chris-wilson.co.uk

drm/i915/gt: Expose engine->mmio_base via sysfs

Use the per-engine sysfs directory to let userspace discover the
mmio_base of each engine. Prior to recent generations, the user
accessible registers on each engine are at a fixed offset relative to
each engine -- but require absolute addressing. As the absolute address
depends on the actual physical engine, this is not always possible to
determine from userspace (for example icl may expose vcs1 or vcs2 as the
second vcs engine). Make this easy for userspace to discover by
providing the mmio_base in sysfs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228131716.3243616-2-chris@chris-wilson.co.uk

drm/i915/gt: Expose engine properties via sysfs

Preliminary stub to add engines underneath /sys/class/drm/cardN/, so
that we can expose properties on each engine to the sysadmin.

To start with we have basic analogues of the i915_query ioctl so that we
can pretty print engine discovery from the shell, and flesh out the
directory structure. Later we will add writeable sysadmin properties such
as per-engine timeout controls.

An example tree of the engine properties on Braswell:
    /sys/class/drm/card0
    └── engine
        ├── bcs0
        │   ├── capabilities
        │   ├── class
        │   ├── instance
        │   ├── known_capabilities
        │   └── name
        ├── rcs0
        │   ├── capabilities
        │   ├── class
        │   ├── instance
        │   ├── known_capabilities
        │   └── name
        ├── vcs0
        │   ├── capabilities
        │   ├── class
        │   ├── instance
        │   ├── known_capabilities
        │   └── name
        └── vecs0
            ├── capabilities
            ├── class
            ├── instance
            ├── known_capabilities
            └── name

v2: Include stringified capabilities
v3: Include all known capabilities for futureproofing.
v4: Combine the two caps loops into one

v5: Hide underneath Kconfig.unstable for wider discussion

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228131716.3243616-1-chris@chris-wilson.co.uk

drm/i915/selftests: Fix return in assert_mmap_offset()

The assert_mmap_offset() returns type bool so if we return an error
pointer that is "return true;" or success.  If we have an error, then
we should return false.

Fixes: 3d81d589d6e3 ("drm/i915: Test exhaustion of the mmap space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain

drm/i915: Drop WaDDIIOTimeout:glk

WaDDIIOTimeout is only for A1 (pre-prod) glk steppings. Nuke it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128155152.21977-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Limit display Wa_1405510057 to gen11

TGL+ supposedly do not need Wa_1405510057 so limit it to
gen11 only.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128155152.21977-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Nuke pre-production GLK HDMI w/a 1139

w/a #1139 is only needed for pre-production GLK. Nuke it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128155152.21977-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915/gt: Reset queue_priority_hint after wedging

An odd and highly unlikely path caught us out. On delayed submission
(due to an asynchronous reset handler), we poked the priority_hint and
kicked the tasklet. However, we had already marked the device as wedged
and swapped out the tasklet for a no-op. The result was that we never
cleared the priority hint and became upset when we later checked.

<0> [574.303565] i915_sel-6278    2.... 481822445us : __i915_subtests: Running intel_execlists_live_selftests/live_error_interrupt
<0> [574.303565] i915_sel-6278    2.... 481822472us : __engine_unpark: 0000:00:02.0 rcs0:
<0> [574.303565] i915_sel-6278    2.... 481822491us : __gt_unpark: 0000:00:02.0
<0> [574.303565] i915_sel-6278    2.... 481823220us : execlists_context_reset: 0000:00:02.0 rcs0: context:f4ee reset
<0> [574.303565] i915_sel-6278    2.... 481824830us : __intel_context_active: 0000:00:02.0 rcs0: context:f51b active
<0> [574.303565] i915_sel-6278    2.... 481825258us : __intel_context_do_pin: 0000:00:02.0 rcs0: context:f51b pin ring:{start:00006000, head:0000, tail:0000}
<0> [574.303565] i915_sel-6278    2.... 481825311us : __i915_request_commit: 0000:00:02.0 rcs0: fence f51b:2, current 0
<0> [574.303565] i915_sel-6278    2d..1 481825347us : __i915_request_submit: 0000:00:02.0 rcs0: fence f51b:2, current 0
<0> [574.303565] i915_sel-6278    2d..1 481825363us : trace_ports: 0000:00:02.0 rcs0: submit { f51b:2, 0:0 }
<0> [574.303565] i915_sel-6278    2.... 481826809us : __intel_context_active: 0000:00:02.0 rcs0: context:f51c active
<0> [574.303565]   <idle>-0       7d.h2 481827326us : cs_irq_handler: 0000:00:02.0 rcs0: CS error: 1
<0> [574.303565]   <idle>-0       7..s1 481827377us : process_csb: 0000:00:02.0 rcs0: cs-irq head=3, tail=4
<0> [574.303565]   <idle>-0       7..s1 481827379us : process_csb: 0000:00:02.0 rcs0: csb[4]: status=0x10000001:0x00000000
<0> [574.305593]   <idle>-0       7..s1 481827385us : trace_ports: 0000:00:02.0 rcs0: promote { f51b:2*, 0:0 }
<0> [574.305611]   <idle>-0       7..s1 481828179us : execlists_reset: 0000:00:02.0 rcs0: reset for CS error
<0> [574.305611] i915_sel-6278    2.... 481828284us : __intel_context_do_pin: 0000:00:02.0 rcs0: context:f51c pin ring:{start:00007000, head:0000, tail:0000}
<0> [574.305611] i915_sel-6278    2.... 481828345us : __i915_request_commit: 0000:00:02.0 rcs0: fence f51c:2, current 0
<0> [574.305611]   <idle>-0       7dNs2 481847823us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence f51b:2, current 1
<0> [574.305611]   <idle>-0       7dNs2 481847857us : execlists_hold: 0000:00:02.0 rcs0: fence f51b:2, current 1 on hold
<0> [574.305611]   <idle>-0       7.Ns1 481847863us : intel_engine_reset: 0000:00:02.0 rcs0: flags=4
<0> [574.305611]   <idle>-0       7.Ns1 481847945us : execlists_reset_prepare: 0000:00:02.0 rcs0: depth<-1
<0> [574.305611]   <idle>-0       7.Ns1 481847946us : intel_engine_stop_cs: 0000:00:02.0 rcs0:
<0> [574.305611]   <idle>-0       7.Ns1 538584284us : intel_engine_stop_cs: 0000:00:02.0 rcs0: timed out on STOP_RING -> IDLE
<0> [574.305611]   <idle>-0       7.Ns1 538584347us : __intel_gt_reset: 0000:00:02.0 engine_mask=1
<0> [574.305611]   <idle>-0       7.Ns1 538584406us : execlists_reset_rewind: 0000:00:02.0 rcs0:
<0> [574.305611]   <idle>-0       7dNs2 538585050us : __i915_request_reset: 0000:00:02.0 rcs0: fence f51b:2, current 1 guilty? yes
<0> [574.305611]   <idle>-0       7dNs2 538585063us : __execlists_reset: 0000:00:02.0 rcs0: replay {head:0000, tail:0068}
<0> [574.306565]   <idle>-0       7.Ns1 538588457us : intel_engine_cancel_stop_cs: 0000:00:02.0 rcs0:
<0> [574.306565]   <idle>-0       7dNs2 538588462us : __i915_request_submit: 0000:00:02.0 rcs0: fence f51c:2, current 0
<0> [574.306565]   <idle>-0       7dNs2 538588471us : trace_ports: 0000:00:02.0 rcs0: submit { f51c:2, 0:0 }
<0> [574.306565]   <idle>-0       7.Ns1 538588474us : execlists_reset_finish: 0000:00:02.0 rcs0: depth->1
<0> [574.306565] kworker/-202     2.... 538588755us : i915_request_retire: 0000:00:02.0 rcs0: fence f51c:2, current 2
<0> [574.306565] ksoftirq-46      7..s. 538588773us : process_csb: 0000:00:02.0 rcs0: cs-irq head=11, tail=1
<0> [574.306565] ksoftirq-46      7..s. 538588774us : process_csb: 0000:00:02.0 rcs0: csb[0]: status=0x10000001:0x00000000
<0> [574.306565] ksoftirq-46      7..s. 538588776us : trace_ports: 0000:00:02.0 rcs0: promote { f51c:2!, 0:0 }
<0> [574.306565] ksoftirq-46      7..s. 538588778us : process_csb: 0000:00:02.0 rcs0: csb[1]: status=0x10000018:0x00000020
<0> [574.306565] ksoftirq-46      7..s. 538588779us : trace_ports: 0000:00:02.0 rcs0: completed { f51c:2!, 0:0 }
<0> [574.306565] kworker/-202     2.... 538588826us : intel_context_unpin: 0000:00:02.0 rcs0: context:f51c unpin
<0> [574.306565] i915_sel-6278    6.... 538589663us : __intel_gt_set_wedged.part.32: 0000:00:02.0 start
<0> [574.306565] i915_sel-6278    6.... 538589667us : execlists_reset_prepare: 0000:00:02.0 rcs0: depth<-0
<0> [574.306565] i915_sel-6278    6.... 538589710us : intel_engine_stop_cs: 0000:00:02.0 rcs0:
<0> [574.306565] i915_sel-6278    6.... 538589732us : execlists_reset_prepare: 0000:00:02.0 bcs0: depth<-0
<0> [574.307591] i915_sel-6278    6.... 538589733us : intel_engine_stop_cs: 0000:00:02.0 bcs0:
<0> [574.307591] i915_sel-6278    6.... 538589757us : execlists_reset_prepare: 0000:00:02.0 vcs0: depth<-0
<0> [574.307591] i915_sel-6278    6.... 538589758us : intel_engine_stop_cs: 0000:00:02.0 vcs0:
<0> [574.307591] i915_sel-6278    6.... 538589771us : execlists_reset_prepare: 0000:00:02.0 vcs1: depth<-0
<0> [574.307591] i915_sel-6278    6.... 538589772us : intel_engine_stop_cs: 0000:00:02.0 vcs1:
<0> [574.307591] i915_sel-6278    6.... 538589778us : execlists_reset_prepare: 0000:00:02.0 vecs0: depth<-0
<0> [574.307591] i915_sel-6278    6.... 538589780us : intel_engine_stop_cs: 0000:00:02.0 vecs0:
<0> [574.307591] i915_sel-6278    6.... 538589786us : __intel_gt_reset: 0000:00:02.0 engine_mask=ff
<0> [574.307591] i915_sel-6278    6.... 538591175us : execlists_reset_cancel: 0000:00:02.0 rcs0:
<0> [574.307591] i915_sel-6278    6.... 538591970us : execlists_reset_cancel: 0000:00:02.0 bcs0:
<0> [574.307591] i915_sel-6278    6.... 538591982us : execlists_reset_cancel: 0000:00:02.0 vcs0:
<0> [574.307591] i915_sel-6278    6.... 538591996us : execlists_reset_cancel: 0000:00:02.0 vcs1:
<0> [574.307591] i915_sel-6278    6.... 538592759us : execlists_reset_cancel: 0000:00:02.0 vecs0:
<0> [574.307591] i915_sel-6278    6.... 538592977us : execlists_reset_finish: 0000:00:02.0 rcs0: depth->0
<0> [574.307591] i915_sel-6278    6.N.. 538592996us : execlists_reset_finish: 0000:00:02.0 bcs0: depth->0
<0> [574.307591] i915_sel-6278    6.N.. 538593023us : execlists_reset_finish: 0000:00:02.0 vcs0: depth->0
<0> [574.307591] i915_sel-6278    6.N.. 538593037us : execlists_reset_finish: 0000:00:02.0 vcs1: depth->0
<0> [574.307591] i915_sel-6278    6.N.. 538593051us : execlists_reset_finish: 0000:00:02.0 vecs0: depth->0
<0> [574.307591] i915_sel-6278    6.... 538593407us : __intel_gt_set_wedged.part.32: 0000:00:02.0 end
<0> [574.307591] kworker/-210     7d..1 551958381us : execlists_unhold: 0000:00:02.0 rcs0: fence f51b:2, current 2 hold release
<0> [574.307591] i915_sel-6278    0.... 559490788us : i915_request_retire: 0000:00:02.0 rcs0: fence f51b:2, current 2
<0> [574.307591] i915_sel-6278    0.... 559490793us : intel_context_unpin: 0000:00:02.0 rcs0: context:f51b unpin
<0> [574.307591] i915_sel-6278    0.... 559490798us : __engine_park: 0000:00:02.0 rcs0: parked
<0> [574.307591] i915_sel-6278    0.... 559490982us : __intel_context_retire: 0000:00:02.0 rcs0: context:f51c retire runtime: { total:30004ns, avg:30004ns }
<0> [574.307591] i915_sel-6278    0.... 559491372us : __engine_park: __engine_park:261 GEM_BUG_ON(engine->execlists.queue_priority_hint != (-((int)(~0U >> 1)) - 1))

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-9-chris@chris-wilson.co.uk

drm/i915/selftests: Be a little more lenient for reset workers

Give the reset worker a kick before losing help when waiting for hang
recovery, as the CPU scheduler is a little unreliable.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-15-chris@chris-wilson.co.uk

drm/i915: Add glk to intel_detect_preproduction_hw()

Detect GLK pre-production steppings. Not 100% of A2 being pre-prod
since the spec is a bit of a mess but feels more or less correct.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128155152.21977-4-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Wait for the context switch

As we require a context switch to ensure that the current context is
switched out and saved to memory, perform an explicit switch to the
kernel context and wait for it.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1336
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228082330.2411941-18-chris@chris-wilson.co.uk

drm/i915/perf: Manually acquire engine-wakeref around use of kernel_context

The engine->kernel_context is a special case for request emission. Since
it is used as the barrier within the engine's wakeref, we must acquire the
wakeref before submitting a request to the kernel_context.

Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-3-chris@chris-wilson.co.uk

drm/i915/perf: Mark up the racy use of perf->exclusive_stream

Inside the general i915_oa_init_reg_state() we avoid using the
perf->mutex. However, we rely on perf->exclusive_stream being valid to
access at that point, and for that we have to control the race with
disabling perf. This relies on the disabling being a heavy barrier that
inspects all active contexts, after marking the perf->exclusive_stream
as not available. This should ensure that there are no more concurrent
accesses to the perf->exclusive_stream as we destroy it.

Mark up the races around the perf->exclusive_stream so that they stand
out much more. (And hopefully we will be running kcsan to start
validating that the only races we have are carefully controlled.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-2-chris@chris-wilson.co.uk

drm/i915: Fix wrongly populated plane possible_crtcs bit mask

As a disabled pipe in pipe_mask is not having a valid intel crtc,
driver wrongly populates the possible_crtcs mask while initializing
the plane for a CRTC. Fixing up the plane possible_crtcs mask.

changes since RFC:
- Simplify the possible_crtcs initialization. [Ville]
v2:
- Removed the unnecessary stack garbage possible_crtcs to
  drm_universal_plane_init. [Ville]
v3:
- Combine the intel_crtc assignment and declaration. [Ville]
v4:
- Fix possible_crtcs abused bits from
  intel_{primary,curosr,sprite}_plane_create(). [Ville]

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226163517.31234-1-anshuman.gupta@intel.com

drm/i915: Protect i915_request_await_start from early waits

We need to be extremely careful inside i915_request_await_start() as it
needs to walk the list of requests in the foreign timeline with very
little protection. As we hold our own timeline mutex, we can not nest
inside the signaler's timeline mutex, so all that remains is our RCU
protection. However, to be safe we need to tell the compiler that we may
be traversing the list only under RCU protection, and furthermore we
need to start declaring requests as elements of the timeline from their
construction.

Fixes: 9ddc8ec027a3 ("drm/i915: Eliminate the trylock for awaiting an earlier request")
Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-11-chris@chris-wilson.co.uk

drm/i915/selftests: Check recovery from corrupted LRC

Check that we can recover if the LRC is totally corrupted. Based on a
very simple theory that anything that can be adjusted via the context
(i.e. on behalf of the user), should be under the purview of the
per-engine-reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-13-chris@chris-wilson.co.uk

drm/i915/selftests: Verify LRC isolation

Record the LRC registers before/after a preemption event to ensure that
the first context sees nothing from the second client; at least in the
normal per-context register state.

References: https://gitlab.freedesktop.org/drm/intel/issues/1233
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-12-chris@chris-wilson.co.uk

drm/i915/gt: Pull marking vm as closed underneath the vm->mutex

Pull the final atomic_dec of vm->open (marking the vm as closed)
underneath the same vm->mutex as used to close it. This is required to
correctly serialise with attempting to reuse the vma as the vm is closed
by a second thread.

References: 00de702c6c6f ("drm/i915: Check that the vma hasn't been closed before we insert it")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-10-chris@chris-wilson.co.uk

drm/i915/gt: Check engine-is-awake on reset later

As we drop the engine-pm on retiring, that may happen while there are
still CS events in the buffer. As such we cannot assert the engine is
still active on reset, until we know that the current request is still
in flight.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1338
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227204727.2009346-1-chris@chris-wilson.co.uk

drm/i915/selftests: Disable heartbeat around manual pulse tests

Still chasing the mystery of the stray idle flush, let's ensure that the
heartbeat does not run at the same time as our test and confuse us.

References: https://gitlab.freedesktop.org/drm/intel/issues/541
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-8-chris@chris-wilson.co.uk

drm/i915: Skip barriers inside waits

Attaching to the i915_active barrier is a two stage process, and a flush
is only effective when the barrier is activation. Thus it is possible
for us to see a barrier, and attempt to flush, only for our flush to
have no effect. As such, before attempting to activate signaling on the
fence we need to double check it is a fence!

Fixes: d13a31770077 ("drm/i915: Flush idle barriers when waiting")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1333
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-1-chris@chris-wilson.co.uk

drm/i915/ggtt: do not set bits 1-11 in gen12 ptes

On TGL, bits 2-4 in the GGTT PTE are not ignored anymore and are
instead used for some extra VT-d capabilities. We don't (yet?) have
support for those capabilities, but, given that we shared the pte_encode
function betweed GGTT and PPGTT, we still set those bits to the PPGTT
PPAT values. The DMA engine gets very confused when those bits are
set while the iommu is enabled, leading to errors. E.g. when loading
the GuC we get:

[    9.796218] DMAR: DRHD: handling fault status reg 2
[    9.796235] DMAR: [DMA Write] Request device [00:02.0] PASID ffffffff fault addr 0 [fault reason 02] Present bit in context entry is clear
[    9.899215] [drm:intel_guc_fw_upload [i915]] *ERROR* GuC firmware signature verification failed

To fix this, just have dedicated gen8_pte_encode function per type of
gtt. Also, explicitly set vm->pte_encode for gen8_ppgtt, even if we
don't use it, to make sure we don't accidentally assign it to the GGTT
one, like we do for gen6_ppgtt, in case we need it in the future.

Reported-by: "Sodhi, Vunny" <vunny.sodhi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226185657.26445-1-daniele.ceraolospurio@intel.com

drm/i915/tgl: Add Wa_1608008084

Wa_1608008084 is an additional WA that applies to writes on FF_MODE2
register. We can't read it back either from CPU or GPU. Since the other
bits should be 0, recommendation to handle Wa_1604555607 is to actually
just write the timer value.

Do a write only and don't try to read it, neither before or after
the WA is applied.

Fixes: ff690b2111ba ("drm/i915/tgl: Implement Wa_1604555607")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224191258.15668-1-lucas.demarchi@intel.com

drm/i915: Set up PIPE_MISC truncate bit on tgl+

Looks like the pipe rounding mode bit has moved from PIPE_CHICKEN to
PIPE_MISC on tgl. Frob the new location.

Bspec does still document the old bits as well, so I left the code
for them as is until we get clarification from the hw folks on
whether the old bits still do something useful.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226163054.9509-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: remove ICP_PP_CONTROL

This register was placed in the middle of the PP_STATUS definition
instead of together with the PP_CONTROL where it should. Since it's not
used and there are no current plans to use it, just remove the
definition.

v2: remove the define rather than moving it.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308232321.30168-1-lucas.demarchi@intel.com

drm/i915/drv: use intel_uncore_write() for register access

The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().

Replace the sole remaining I915_WRITE() in i915_drv.c with
intel_uncore_write(), although it might be better to keep the entire
file void of direct register access.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225111509.21879-3-jani.nikula@intel.com

drm/i915/dram: use intel_uncore_*() functions for register access

The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().

Replace them with the corresponding uncore register accessors
intel_uncore_read(), intel_uncore_write(), intel_uncore_posting_read(),
intel_uncore_read_fw(), and intel_uncore_write_fw().

Rename dev_priv to i915 while at it.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225111509.21879-2-jani.nikula@intel.com

drm/i915: split out intel_dram.[ch] from i915_drv.c

The DRAM related routines are pretty isolated from the rest of the
i915_drv.c, split it out to a separate file. Put the eDRAM stuff in the
same bag, and rename the visible functions to have intel_dram_
prefix. Do some benign whitespace fixes and dev_priv -> i915 conversions
while at it.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225111509.21879-1-jani.nikula@intel.com

drm/i915: significantly reduce the use of <drm/i915_drm.h>

The #include has been splattered all over the place, but there are
precious few places, all .c files, that actually need it.

v2: remove leftover double newlines

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225133131.3301-1-jani.nikula@intel.com

drm/i915/tgl: Add Wa_1606054188:tgl

On Tiger Lake we do not support source keying in the pixel formats P010,
P012, P016.

v2: Move WA to end of function. Create helper function for format
check. Less verbose debugging messaging.

v3: whitespace

v4(MattR):
 - Actually return EINVAL to reject this combination.
 - Pass format parameter as u32.
 - Make test TGL-specific for now.
 - Switch to per-device logging.
 - Shorten/simplify comment.

Bspec: 52890
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224223651.3801646-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/tgl: Allow DC5/DC6 entry while PG2 is active

On gen12, we no longer need to disable DC5/DC6 when when PG2 is in use
(which translates to cases where we're using VDSC on pipe A).

Bspec: 49193
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220231843.3127468-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Merge tag 'gvt-next-2020-02-26' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2020-02-26

- Enable VFIO edid for all platform (Zhenyu)
- Code cleanup for attr group and unused vblank complete (Zhenyu, Julian)
- Make gvt oblivious of kvmgt data structures (Julian)
- Make WARN* drm specific (Pankaj)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226103840.GD10413@zhen-hp.sh.intel.com

drm/i915: Fix broken num_entries in skl_ddb_allocation_overlaps

skl_ddb_allocation_overlaps() num_entries hass been passed as
INTEL_NUM_PIPES, it should be I915_MAX_PIPES.

v2:
- Rebased.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-8-anshuman.gupta@intel.com

drm/i915: Add WARN_ON in intel_get_crtc_for_pipe()

Add a WARN_ON for a disabled pipe in pipe_mask at
intel_get_crtc_for_pipe() function.

v2:
- Use drm_WARN_ON instead of WARN_ON.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-7-anshuman.gupta@intel.com

drm/i915: Get first crtc instead of PIPE_A crtc

intel_plane_fb_max_stride should return the max stride of
primary plane for first available pipe in intel device info
pipe_mask.
Similarly glk_force_audio_cdclk() should also use the first
available CRTC instead of pipe 'A' crtc to force the cdclk
changes.

changes since RFC:
- Introduced a helper to get first intel_crtc intel_get_first_crtc. [Ville]
v1:
- Used intel_get_first_crtc() instead of PIPE_A crtc in
  glk_force_audio_cdclk(). [Ville]

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-6-anshuman.gupta@intel.com

drm/i915: Fix broken transcoder err state

Skip the transcoder whose pipe is disabled while
initializing transcoder error state in 3 non-contiguous
display pipe system.

v2:
- Don't skip EDP_TRANSCODER error state. [Ville]
- Use a helper has_transcoder(). [Ville]
v3:
- Removed DSI transcoder case from has_transcoder(),
  and few other cosmetic changes. [Ville]

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-4-anshuman.gupta@intel.com

drm/i915: Remove (pipe == crtc->index) assumption

we can't have (pipe == crtc->index) assumption in
driver in order to support 3 non-contiguous
display pipe system.

FIXME: Remove the WARN_ON(drm_crtc_index(&crtc->base) != crtc->pipe)
when we will fix all such assumption.

changes since RFC:
- Added again removed (pipe == crtc->index) WARN_ON.
- Pass drm_crtc_index instead of intel pipe in order to
  call drm_handle_vblank().
v2:
- Used drm_crtc_handle_vblank()/drm_crtc_wait_one_vblank()
  instead of drm_handle_vblank/drm_wait_one_vblank(). [Jani]
- Introduced intel_handle_vblank() helper to avoid sprinkle
  of intel_crtc across irq_handlers. [Ville]
v3:
- Moved intel_handle_vblank() from header to i915_irq.c. [Ville]

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-3-anshuman.gupta@intel.com

drm/i915: Iterate over pipes and skip the disabled one

It should not be assumed that a disabled display pipe will be
always last the pipe.
for_each_pipe() should iterate over I915_MAX_PIPES and check
for the disabled pipe and skip that pipe so that it should not
initialize the intel crtc for any disabled pipes.

Due to changes in for_each_pipe() macro, it requires to handle
the below compilation error.
"suggest explicit braces to avoid ambiguous ‘else’
[-Werror=dangling-else]"

v2:
- Cosmetic changes, removed unwanted parentheses. [Ville]

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-2-anshuman.gupta@intel.com

drm/i915: split intel_modeset_init() to pre/post irq install

Split inte_modeset_init() to parts before and after irq install, to
facilitate further cleanup. The error paths are a mess, otherwise no
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224120828.22105-1-jani.nikula@intel.com

drm/i915: stop assigning drm->dev_private pointer

We no longer need or use it as we subclass struct drm_device in our
struct drm_i915_private, and can always use to_i915() to get at
i915. Stop assigning the pointer to catch anyone trying to add new users
for ->dev_private.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224113312.13674-1-jani.nikula@intel.com

drm/i915/gem: Honour O_NONBLOCK before throttling execbuf submissions

Check the user's flags on the struct file before deciding whether or not
to stall before submitting a request. This allows us to reasonably
cheaply honour O_NONBLOCK without checking at more critical phases
during request submission.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225192206.1107336-3-chris@chris-wilson.co.uk

drm/i915: Allow userspace to specify ringsize on construction

No good reason why we must always use a static ringsize, so let
userspace select one during construction.

Link: https://github.com/intel/compute-runtime/pull/261
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225192206.1107336-2-chris@chris-wilson.co.uk

drm/i915: Flush idle barriers when waiting

If we do find ourselves with an idle barrier inside our active while
waiting, attempt to flush it by emitting a pulse using the kernel
context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225192206.1107336-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20200225

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.

Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com

drm/i915: Drop assertion that active->fence is unchanged

We cannot assert the fence is not yet changed as the next thread may
change it prior to acquiring our lock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225082233.274530-1-chris@chris-wilson.co.uk