review.tizen.org Git - platform/kernel/linux-rpi.git/log

mailmap: correct email aliasing for Oleksij Rempel

Ensure the current work email addresses for Oleksij Rempel are preserved
and not overridden by private address. Alias the alternate work email to
the primary work email address.

Link: https://lkml.kernel.org/r/20231011112519.1427077-1-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Cc: Mark Brown <broonie@kernel.org>
Cc: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: map Bartosz's old address to the current one

I no longer work for BayLibre but many DT bindings have my BL address in
the maintainers entries. Map it to the email address I use for kernel
development.

Link: https://lkml.kernel.org/r/20231011150104.73863-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Suggested-by: Conor Dooley <conor@kernel.org>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/sysfs: check DAMOS regions update progress from before_terminate()

DAMON_SYSFS can receive DAMOS tried regions update request while kdamond
is already out of the main loop and before_terminate callback
(damon_sysfs_before_terminate() in this case) is not yet called.  And
damon_sysfs_handle_cmd() can further be finished before the callback is
invoked.  Then, damon_sysfs_before_terminate() unlocks damon_sysfs_lock,
which is not locked by anyone.  This happens because the callback function
assumes damon_sysfs_cmd_request_callback() should be called before it.
Check if the assumption was true before doing the unlock, to avoid this
problem.

Link: https://lkml.kernel.org/r/20231007200432.3110-1-sj@kernel.org
Fixes: f1d13cacabe1 ("mm/damon/sysfs: implement DAMOS tried regions update command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: Ondrej has moved

Update my email-address in MAINTAINERS to <megi@xff.cz>. Also add
.mailmap entries to map my old, now blocked, email address.

Link: https://lkml.kernel.org/r/20231008105812.1084226-1-megi@xff.cz
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Cc: Mark Brown <broonie@kernel.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: disable kasan_non_canonical_hook() for HW tags

On arm64, building with CONFIG_KASAN_HW_TAGS now causes a compile-time
error:

mm/kasan/report.c: In function 'kasan_non_canonical_hook':
mm/kasan/report.c:637:20: error: 'KASAN_SHADOW_OFFSET' undeclared (first use in this function)
  637 |         if (addr < KASAN_SHADOW_OFFSET)
      |                    ^~~~~~~~~~~~~~~~~~~
mm/kasan/report.c:637:20: note: each undeclared identifier is reported only once for each function it appears in
mm/kasan/report.c:640:77: error: expected expression before ';' token
  640 |         orig_addr = (addr - KASAN_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT;

This was caused by removing the dependency on CONFIG_KASAN_INLINE that
used to prevent this from happening. Use the more specific dependency
on KASAN_SW_TAGS || KASAN_GENERIC to only ignore the function for hwasan
mode.

Link: https://lkml.kernel.org/r/20231016200925.984439-1-arnd@kernel.org
Fixes: 12ec6a919b0f ("kasan: print the original fault addr when access invalid shadow")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: print the original fault addr when access invalid shadow

when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table.  Access such shadow
address causes kernel oops.  Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:

[ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003,
    pud=000000005d3ce003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __hwasan_load8_noabort+0x5c/0x90
lr : do_ib_ob+0xf4/0x110
ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa.
The problem is reading invalid shadow in kasan_check_range.

The generic kasan also has similar oops.

It only reports the shadow address which causes oops but not
the original address.

Commit 2f004eea0fc8("x86/kasan: Print original address on #GP")
introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE.

This patch extends it to KASAN_OUTLINE mode.

Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com
Fixes: 2f004eea0fc8("x86/kasan: Print original address on #GP")
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hugetlbfs: close race between MADV_DONTNEED and page fault

Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.

This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.

Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault.  However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.

Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:

       CPU 1                            CPU 2

       MADV_DONTNEED
       unmap page
       shoot down TLB entry
                                       page fault
                                       fail to allocate a huge page
                                       killed with SIGBUS
       free page

Fix that race by pulling the locking from __unmap_hugepage_final_range
into helper functions called from zap_page_range_single.  This ensures
page faults stay locked out of the MADV_DONTNEED VMA until the huge pages
have actually been freed.

Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hugetlbfs: extend hugetlb_vma_lock to private VMAs

Extend the locking scheme used to protect shared hugetlb mappings from
truncate vs page fault races, in order to protect private hugetlb mappings
(with resv_map) against MADV_DONTNEED.

Add a read-write semaphore to the resv_map data structure, and use that
from the hugetlb_vma_(un)lock_* functions, in preparation for closing the
race between MADV_DONTNEED and page faults.

Link: https://lkml.kernel.org/r/20231006040020.3677377-3-riel@surriel.com
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hugetlbfs: clear resv_map pointer if mmap fails

Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.

Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.

This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.

Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault.  However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.

Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:

       CPU 1                            CPU 2

       MADV_DONTNEED
       unmap page
       shoot down TLB entry
                                       page fault
                                       fail to allocate a huge page
                                       killed with SIGBUS
       free page

Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single.  This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.

This patch (of 3):

Hugetlbfs leaves a dangling pointer in the VMA if mmap fails.  This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.

Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: zswap: fix pool refcount bug around shrink_worker()

When a zswap store fails due to the limit, it acquires a pool reference
and queues the shrinker.  When the shrinker runs, it drops the reference.
However, there can be multiple store attempts before the shrinker wakes up
and runs once.  This results in reference leaks and eventual saturation
warnings for the pool refcount.

Fix this by dropping the reference again when the shrinker is already
queued.  This ensures one reference per shrinker run.

Link: https://lkml.kernel.org/r/20231006160024.170748-1-hannes@cmpxchg.org
Fixes: 45190f01dd40 ("mm/zswap.c: add allocation hysteresis if pool limit is hit")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Chris Mason <clm@fb.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pNFS/flexfiles: Check the layout validity in ff_layout_mirror_prepare_stats

Ensure that we check the layout pointer and validity after dereferencing
it in ff_layout_mirror_prepare_stats.

Fixes: 08e2e5bc6c9a ("pNFS/flexfiles: Clean up layoutstats")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS: Fix a hang in nfs4_evict_inode()

We are not allowed to call pnfs_mark_matching_lsegs_return() without
also holding a reference to the layout header, since doing so could lead
to the reference count going to zero when we call
pnfs_layout_remove_lseg(). This again can lead to a hang when we get to
nfs4_evict_inode() and are unable to clear the layout pointer.

pnfs_layout_return_unused_byserver() is guilty of this behaviour, and
has been seen to trigger the refcount warning prior to a hang.

Fixes: b6d49ecd1081 ("NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Merge tag 'asoc-fix-v6.6-rc6' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

A fairly large set of fixes here but all driver specific, the biggest
block is Johan's work shaking out issues with device setup and teardown
for the wcd938x driver which is a relatively large but clearly broken
down set of changes.

There is one core helper function added as part of a fix for wsa-macro.

Merge tag 'spi-fix-v6-6-rc4' of git://git./linux/kernel/git/broonie/spi

Pull spi fix from Mark Brown:
"A fix for the npcm-fiu driver in cases where there are no dummy bytes
during reads"

* tag 'spi-fix-v6-6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0

Merge tag 'regmap-fix-v6.6-rc6' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"A straightforward fix from Johan for a long standing bug in cases
  where we both have regmaps without devices and something is using
  dev_get_regmap()"

* tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: fix NULL deref on lookup

virtio_pci: fix the common cfg map size

The function vp_modern_map_capability() takes the size parameter,
which corresponds to the size of virtio_pci_common_cfg. As a result,
this indicates the size of memory area to map.

Now the size is the size of virtio_pci_common_cfg, but some feature(such
as the _F_RING_RESET) needs the virtio_pci_modern_common_cfg, so this
commit changes the size to the size of virtio_pci_modern_common_cfg.

Cc: stable@vger.kernel.org
Fixes: 0b50cece0b78 ("virtio_pci: introduce helper to get/set queue reset")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20231010031120.81272-3-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio-crypto: handle config changed by work queue

MST pointed out: config change callback is also handled incorrectly
in this driver, it takes a mutex from interrupt context.

Handle config changed by work queue instead.

Cc: stable@vger.kernel.org
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20231007064309.844889-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE

Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb
entries") Forbade vhost iotlb msg with null size to prevent entries
with size = start = 0 and last = ULONG_MAX to end up in the iotlb.

Then commit 95932ab2ea07 ("vhost: allow batching hint without size")
only applied the check for VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE
message types to fix a regression observed with batching hit.

Still, the introduction of that check introduced a regression for
some users attempting to invalidate the whole ULONG_MAX range by
setting the size to 0. This is the case with qemu/smmuv3/vhost
integration which does not work anymore. It Looks safe to partially
revert the original commit and allow VHOST_IOTLB_INVALIDATE messages
with null size. vhost_iotlb_del_range() will compute a correct end
iova. Same for vhost_vdpa_iotlb_unmap().

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries")
Cc: stable@vger.kernel.org # v5.17+
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230927140544.205088-1-eric.auger@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa/mlx5: Fix firmware error on creation of 1k VQs

A firmware error is triggered when configuring a 9k MTU on the PF after
switching to switchdev mode and then using a vdpa device with larger
(1k) rings:
mlx5_cmd_out_err: CREATE_GENERAL_OBJECT(0xa00) op_mod(0xd) failed, status bad resource(0x5), syndrome (0xf6db90), err(-22)

This is due to the fact that the hw VQ size parameters are computed
based on the umem_1/2/3_buffer_param_a/b capabilities and all
device capabilities are read only when the driver is moved to switchdev mode.

The problematic configuration flow looks like this:
1) Create VF
2) Unbind VF
3) Switch PF to switchdev mode.
4) Bind VF
5) Set PF MTU to 9k
6) create vDPA device
7) Start VM with vDPA device and 1K queue size

Note that setting the MTU before step 3) doesn't trigger this issue.

This patch reads the forementioned umem parameters at the latest point
possible before the VQs of the device are created.

v2:
- Allocate output with kmalloc to reduce stack frame size.
- Removed stable from cc.

Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230831155702.1080754-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio_balloon: Fix endless deflation and inflation on arm64

The deflation request to the target, which isn't unaligned to the
guest page size causes endless deflation and inflation actions. For
example, we receive the flooding QMP events for the changes on memory
balloon's size after a deflation request to the unaligned target is
sent for the ARM64 guest, where we have 64KB base page size.

  /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64      \
  -accel kvm -machine virt,gic-version=host -cpu host          \
  -smp maxcpus=8,cpus=8,sockets=2,clusters=2,cores=2,threads=1 \
  -m 1024M,slots=16,maxmem=64G                                 \
  -object memory-backend-ram,id=mem0,size=512M                 \
  -object memory-backend-ram,id=mem1,size=512M                 \
  -numa node,nodeid=0,memdev=mem0,cpus=0-3                     \
  -numa node,nodeid=1,memdev=mem1,cpus=4-7                     \
    :                                                          \
  -device virtio-balloon-pci,id=balloon0,bus=pcie.10

  { "execute" : "balloon", "arguments": { "value" : 1073672192 } }
  {"return": {}}
  {"timestamp": {"seconds": 1693272173, "microseconds": 88667},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272174, "microseconds": 89704},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272175, "microseconds": 90819},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272176, "microseconds": 91961},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272177, "microseconds": 93040},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272178, "microseconds": 94117},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272179, "microseconds": 95337},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272180, "microseconds": 96615},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272181, "microseconds": 97626},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272182, "microseconds": 98693},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
  {"timestamp": {"seconds": 1693272183, "microseconds": 99698},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272184, "microseconds": 100727},  \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272185, "microseconds": 90430},   \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  {"timestamp": {"seconds": 1693272186, "microseconds": 102999},  \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
     :
  <The similar QMP events repeat>

Fix it by aligning the target up to the guest page size, 64KB in this
specific case. With this applied, no flooding QMP events are observed
and the memory balloon's size can be stablizied to 0x3ffe0000 soon
after the deflation request is sent.

  { "execute" : "balloon", "arguments": { "value" : 1073672192 } }
  {"return": {}}
  {"timestamp": {"seconds": 1693273328, "microseconds": 793075},  \
   "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
  { "execute" : "query-balloon" }
  {"return": {"actual": 1073610752}}

Cc: stable@vger.kernel.org
Signed-off-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230831011007.1032822-1-gshan@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>

vdpa/mlx5: Fix double release of debugfs entry

The error path in setup_driver deletes the debugfs entry but doesn't
clear the pointer. During .dev_del the invalid pointer will be released
again causing a crash.

This patch fixes the issue by always clearing the debugfs entry in
mlx5_vdpa_remove_debugfs. Also, stop removing the debugfs entry in
.dev_del op: the debugfs entry is already handled within the
setup_driver/teardown_driver scope.

Cc: stable@vger.kernel.org
Fixes: f0417e72add5 ("vdpa/mlx5: Add and remove debugfs in setup/teardown driver")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <20230829174014.928189-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio-mmio: fix memory leak of vm_dev

With the recent removal of vm_dev from devres its memory is only freed
via the callback virtio_mmio_release_dev. However, this only takes
effect after device_add is called by register_virtio_device. Until then
it's an unmanaged resource and must be explicitly freed on error exit.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Cc: stable@vger.kernel.org
Fixes: 55c91fedd03d ("virtio-mmio: don't break lifecycle of vm_dev")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230911090328.40538-1-mheyne@amazon.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

vdpa_sim_blk: Fix the potential leak of mgmt_dev

If the shared_buffer allocation fails, need to unregister mgmt_dev first.

Cc: stable@vger.kernel.org
Fixes: abebb16254b36 ("vdpa_sim_blk: support shared backend")
Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230821060333.1155-1-shawn.shao@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

io_uring: fix crash with IORING_SETUP_NO_MMAP and invalid SQ ring address

If we specify a valid CQ ring address but an invalid SQ ring address,
we'll correctly spot this and free the allocated pages and clear them
to NULL. However, we don't clear the ring page count, and hence will
attempt to free the pages again. We've already cleared the address of
the page array when freeing them, but we don't check for that. This
causes the following crash:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Oops [#1]
Modules linked in:
CPU: 0 PID: 20 Comm: kworker/u2:1 Not tainted 6.6.0-rc5-dirty #56
Hardware name: ucbbar,riscvemu-bare (DT)
Workqueue: events_unbound io_ring_exit_work
epc : io_pages_free+0x2a/0x58
ra : io_rings_free+0x3a/0x50
epc : ffffffff808811a2 ra : ffffffff80881406 sp : ffff8f80000c3cd0
status: 0000000200000121 badaddr: 0000000000000000 cause: 000000000000000d
[<ffffffff808811a2>] io_pages_free+0x2a/0x58
[<ffffffff80881406>] io_rings_free+0x3a/0x50
[<ffffffff80882176>] io_ring_exit_work+0x37e/0x424
[<ffffffff80027234>] process_one_work+0x10c/0x1f4
[<ffffffff8002756e>] worker_thread+0x252/0x31c
[<ffffffff8002f5e4>] kthread+0xc4/0xe0
[<ffffffff8000332a>] ret_from_fork+0xa/0x1c

Check for a NULL array in io_pages_free(), but also clear the page counts
when we free them to be on the safer side.

Reported-by: rtm@csail.mit.edu
Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

platform/mellanox: mlxbf-tmfifo: Fix a warning message

This commit fixes the smatch static checker warning in function
mlxbf_tmfifo_rxtx_word() which complains data not initialized at
line 634 when IS_VRING_DROP() is TRUE.

Signed-off-by: Liming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/20231012230235.219861-1-limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

apple-gmux: Hard Code max brightness for MMIO gmux

The data in the max brightness port for iMacs with MMIO gmux incorrectly
reports 0x03ff, but it should be 0xffff. As all other MMIO gmux models
have 0xffff, hard code this for all MMIO gmux's so they all have the
proper brightness range accessible.

Fixes: 0c18184de990 ("platform/x86: apple-gmux: support MMIO gmux on T2 Macs")
Reported-by: Karsten Leipold <poldi@dfn.de>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20231017111444.19304-2-orlandoch.dev@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: platform_profile: Propagate error if profile registration fails

If platform_profile_register() fails, the driver does not propagate
the error, but instead probes successfully. This means when the driver
unbinds, the a warning might be issued by platform_profile_remove().

Fix this by propagating the error back to the caller of
surface_platform_profile_probe().

Compile-tested only.

Fixes: b78b4982d763 ("platform/surface: Add platform profile driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231014235449.288702-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

netfilter: nf_tables: revert do not remove elements if set backend implements .abort

nf_tables_abort_release() path calls nft_set_elem_destroy() for
NFT_MSG_NEWSETELEM which releases the element, however, a reference to
the element still remains in the working copy.

Fixes: ebd032fa8818 ("netfilter: nf_tables: do not remove elements if set backend implements .abort")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nft_set_rbtree: .deactivate fails if element has expired

This allows to remove an expired element which is not possible in other
existing set backends, this is more noticeable if gc-interval is high so
expired elements remain in the tree. On-demand gc also does not help in
this case, because this is delete element path. Return NULL if element
has expired.

Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

selftests: netfilter: Run nft_audit.sh in its own netns

Don't mess with the host's firewall ruleset. Since audit logging is not
per-netns, add an initial delay of a second so other selftests' netns
cleanups have a chance to finish.

Fixes: e8dbde59ca3f ("selftests: netfilter: Test nf_tables audit logging")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: nf_tables: audit log object reset once per table

When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.

To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>

ACPI: bus: Move acpi_arm_init() to the place of after acpi_ghes_init()

acpi_agdi_init() in acpi_arm_init() will register a SDEI event, so
it needs the SDEI subsystem to be initialized (which is done in
acpi_ghes_init()) before the AGDI driver probing.

In commit fcea0ccf4fd7 ("ACPI: bus: Consolidate all arm specific
initialisation into acpi_arm_init()"), the acpi_agdi_init() was
called before acpi_ghes_init() and it causes following failure:

| [    0.515864] sdei: Failed to create event 1073741825: -5
| [    0.515866] agdi agdi.0: Failed to register for SDEI event 1073741825
| [    0.515867] agdi: probe of agdi.0 failed with error -5
| ...
| [    0.516022] sdei: SDEIv1.0 (0x0) detected in firmware.

Fix it by moving acpi_arm_init() to the place of after
acpi_ghes_init().

Fixes: fcea0ccf4fd7 ("ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()")
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: irq: Fix incorrect return value in acpi_register_gsi()

acpi_register_gsi() should return a negative value in case of failure.

Currently, it returns the return value from irq_create_fwspec_mapping().
However, irq_create_fwspec_mapping() returns 0 for failure. Fix the
issue by returning -EINVAL if irq_create_fwspec_mapping() returns zero.

Fixes: d44fa3d46079 ("ACPI: Add support for ResourceSource/IRQ domain mapping")
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
[ rjw: Rename a new local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

neighbor: tracing: Move pin6 inside CONFIG_IPV6=y section

When CONFIG_IPV6=n, and building with W=1:

    In file included from include/trace/define_trace.h:102,
     from include/trace/events/neigh.h:255,
     from net/core/net-traces.c:51:
    include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’:
    include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
       42 |                 struct in6_addr *pin6;
  |                                  ^~~~
    include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
      402 |         { assign; }                                                     \
  |           ^~~~~~
    include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
       44 |                              PARAMS(assign),                   \
  |                              ^~~~~~
    include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
       23 | TRACE_EVENT(neigh_create,
  | ^~~~~~~~~~~
    include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
       41 |         TP_fast_assign(
  |         ^~~~~~~~~~~~~~
    In file included from include/trace/define_trace.h:103,
     from include/trace/events/neigh.h:255,
     from net/core/net-traces.c:51:
    include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’:
    include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
       42 |                 struct in6_addr *pin6;
  |                                  ^~~~
    include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
       51 |         { assign; }                                                     \
  |           ^~~~~~
    include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
       44 |                              PARAMS(assign),                   \
  |                              ^~~~~~
    include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
       23 | TRACE_EVENT(neigh_create,
  | ^~~~~~~~~~~
    include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
       41 |         TP_fast_assign(
  |         ^~~~~~~~~~~~~~

Indeed, the variable pin6 is declared and initialized unconditionally,
while it is only used and needlessly re-initialized when support for
IPv6 is enabled.

Fix this by dropping the unused variable initialization, and moving the
variable declaration inside the existing section protected by a check
for CONFIG_IPV6.

Fixes: fc651001d2c5ca4f ("neighbor: Add tracepoint to __neigh_create")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: wwan: iosm: enable runtime pm support for 7560"

Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:

```
[   72.027442] iosm 0000:01:00.0: msg timeout
[   72.531638] iosm 0000:01:00.0: msg timeout
[   73.035414] iosm 0000:01:00.0: msg timeout
[   73.540359] iosm 0000:01:00.0: msg timeout
```

Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.

Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53be6c ("net: wwan: iosm: enable runtime pm support for
7560").

Fixes: e4f5073d53be ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

powerpc/qspinlock: Fix stale propagated yield_cpu

yield_cpu is a sample of a preempted lock holder that gets propagated
back through the queue. Queued waiters use this to yield to the
preempted lock holder without continually sampling the lock word (which
would defeat the purpose of MCS queueing by bouncing the cache line).

The problem is that yield_cpu can become stale. It can take some time to
be passed down the chain, and if any queued waiter gets preempted then
it will cease to propagate the yield_cpu to later waiters.

This can result in yielding to a CPU that no longer holds the lock,
which is bad, but particularly if it is currently in H_CEDE (idle),
then it appears to be preempted and some hypervisors (PowerVM) can
cause very long H_CONFER latencies waiting for H_CEDE wakeup. This
results in latency spikes and hard lockups on oversubscribed
partitions with lock contention.

This is a minimal fix. Before yielding to yield_cpu, sample the lock
word to confirm yield_cpu is still the owner, and bail out of it is not.

Thanks to a bunch of people who reported this and tracked down the
exact problem using tracepoints and dispatch trace logs.

Fixes: 28db61e207ea ("powerpc/qspinlock: allow propagation of yield CPU down the queue")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Laurent Dufour <ldufour@linux.ibm.com>
Reported-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Debugged-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231016124305.139923-2-npiggin@gmail.com

platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events

Newer Asus laptops send the following new WMI event codes when some
of the F1 - F12 "media" hotkeys are pressed:

0x2a Screen Capture
0x2b PrintScreen
0x2c CapsLock

Map 0x2a to KEY_SELECTIVE_SCREENSHOT mirroring how similar hotkeys
are mapped on other laptops.

PrintScreem and CapsLock are also reported as normal PS/2 keyboard events,
map these event codes to KE_IGNORE to avoid "Unknown key code 0x%x\n" log
messages.

Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-4-hdegoede@redhat.com

platform/x86: asus-wmi: Only map brightness codes when using asus-wmi backlight control

Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.

The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:

define NOTIFY_BRNUP_MIN                0x11
define NOTIFY_BRNUP_MAX                0x1f
define NOTIFY_BRNDOWN_MIN              0x20
define NOTIFY_BRNDOWN_MAX              0x2e

        if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
                code = ASUS_WMI_BRN_UP;
        else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
                code = ASUS_WMI_BRN_DOWN;

This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.

This mapping is really only necessary when asus-wmi has registered
a backlight-device for backlight control. In this case the mapping
was used to decide to filter out the keypresss since in this case
the firmware has already modified the brightness itself and instead
of reporting a keypress asus-wmi will just report the new brightness
value to userspace.

OTOH when the firmware does not adjust the brightness itself then
it seems to always report 0x2e for brightness-down presses and
0x2f for brightness up presses independent of the actual brightness
level. So in this case the mapping of the code is not necessary
and this translation actually leads to spurious brightness-down
presses being send to userspace when pressing printscreen or capslock.

Modify asus_wmi_handle_event_code() to only do the mapping
when using asus-wmi backlight control to fix the spurious
brightness-down presses.

Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-3-hdegoede@redhat.com

platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e

Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.

The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:

define NOTIFY_BRNUP_MIN                0x11
define NOTIFY_BRNUP_MAX                0x1f
define NOTIFY_BRNDOWN_MIN              0x20
define NOTIFY_BRNDOWN_MAX              0x2e

        if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
                code = ASUS_WMI_BRN_UP;
        else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
                code = ASUS_WMI_BRN_DOWN;

Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX
aka 0x20 - 0x2e events were mapped to 0x20.

This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.

The plan is disable the 0x11-0x2e special mapping on laptops
where asus-wmi does not register a backlight-device to avoid
the spurious brightness-down keypresses. New laptops always send
0x2e for brightness-down presses, change the special internal
ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in
preparation for fixing the spurious brightness-down presses.

This change does not have any functional impact since all
of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only
then checked against the keymap code and the new 0x2e
value is still in the 0x20 - 0x2e range.

Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com

net: pktgen: Fix interface flags printing

Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.

2) Similarly to the F_IPSEC flag.

3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: 99c6d3d20d62 ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

gpio: vf610: set value before the direction to avoid a glitch

We found a glitch when configuring the pad as output high. To avoid this
glitch, move the data value setting before direction config in the
function vf610_gpio_direction_output().

Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio: vf610: mask the gpio irq in system suspend and support wakeup

Add flag IRQCHIP_MASK_ON_SUSPEND to make sure gpio irq is masked on
suspend, if lack this flag, current irq arctitecture will not mask
the irq, and these unmasked gpio irq will wrongly wakeup the system
even they are not config as wakeup source.

Also add flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND to make sure the gpio
irq which is configed as wakeup source can work as expect.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

sched/eevdf: Fix heap corruption more

Because someone is a flaming idiot... and forgot we have current as
se->on_rq but not actually in the tree itself, and walking rb_parent()
on an entry not in the tree is 'funky' and KASAN complains.

Fixes: 8dafa9d0eb1a ("sched/eevdf: Fix min_deadline heap integrity")
Reported-by: 0599jiangyc@gmail.com
Reported-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218020
Link: https://lkml.kernel.org/r/CAJwJo6ZGXO07%3DQvW4fgQfbsDzQPs9xj5sAQ1zp%3DmAyPMNbHYww%40mail.gmail.com

KEYS: asymmetric: Fix sign/verify on pkcs1pad without a hash

The new sign/verify code broke the case of pkcs1pad without a
hash algorithm. Fix it by setting issig correctly for this case.

Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org # v6.5
Reported-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drm/i915: Retry gtt fault when out of fence registers

If we can't find a free fence register to handle a fault in the GMADR
range just return VM_FAULT_NOPAGE without populating the PTE so that
userspace will retry the access and trigger another fault. Eventually
we should find a free fence and the fault will get properly handled.

A further improvement idea might be to reserve a fence (or one per CPU?)
for the express purpose of handling faults without having to retry. But
that would require some additional work.

Looks like this may have gotten broken originally by
commit 39965b376601 ("drm/i915: don't trash the gtt when running out of fences")
as that changed the errno to -EDEADLK which wasn't handle by the gtt
fault code either. But later in commit 2feeb52859fc ("drm/i915/gt: Fix
-EDEADLK handling regression") I changed it again to -ENOBUFS as -EDEADLK
was now getting used for the ww mutex dance. So this fix only makes
sense after that last commit.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9479
Fixes: 2feeb52859fc ("drm/i915/gt: Fix -EDEADLK handling regression")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012132801.16292-1-ville.syrjala@linux.intel.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
(cherry picked from commit 7f403caabe811b88ab0de3811ff3f4782c415761)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/cx0: Only clear/set the Pipe Reset bit of the PHY Lanes Owned

Currently, with MFD/pin assignment D, the driver clears the pipe reset bit
of lane 1 which is not owned by display. This causes the display
to block S0iX.

By not clearing this bit for lane 1 and keeping whatever default, S0ix
started to work. This is already what the driver does at the end
of the phy lane reset sequence (Step#8)

Bspec: 65451
Fixes: 619a06dba6fa ("drm/i915/mtl: Reset only one lane in case of MFD")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005001310.154396-1-khaled.almahallawy@intel.com
(cherry picked from commit 4a07f063d20c46524f00976f4537de72d9f31c4e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'ipsec-2023-10-17' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2023-10-17

1) Fix a slab-use-after-free in xfrm_policy_inexact_list_reinsert.
   From Dong Chenchen.

2) Fix data-races in the xfrm interfaces dev->stats fields.
   From Eric Dumazet.

3) Fix a data-race in xfrm_gen_index.
   From Eric Dumazet.

4) Fix an inet6_dev refcount underflow.
   From Zhang Changzhong.

5) Check the return value of pskb_trim in esp_remove_trailer
   for esp4 and esp6. From Ma Ke.

6) Fix a data-race in xfrm_lookup_with_ifid.
   From Eric Dumazet.

* tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: fix a data-race in xfrm_lookup_with_ifid()
  net: ipv4: fix return value check in esp_remove_trailer
  net: ipv6: fix return value check in esp_remove_trailer
  xfrm6: fix inet6_dev refcount underflow problem
  xfrm: fix a data-race in xfrm_gen_index()
  xfrm: interface: use DEV_STATS_INC()
  net: xfrm: skip policies marked as dead while reinserting policies
====================

Link: https://lore.kernel.org/r/20231017083723.1364940-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: smsc95xx: Fix an error code in smsc95xx_reset()

Return a negative error code instead of success.

Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/147927f0-9ada-45cc-81ff-75a19dd30b76@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tun: prevent negative ifindex

After commit 956db0a13b47 ("net: warn about attempts to register
negative ifindex") syzbot is able to trigger the following splat.

Negative ifindex are not supported.

WARNING: CPU: 1 PID: 6003 at net/core/dev.c:9596 dev_index_reserve+0x104/0x210
Modules linked in:
CPU: 1 PID: 6003 Comm: syz-executor926 Not tainted 6.6.0-rc4-syzkaller-g19af4a4ed414 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dev_index_reserve+0x104/0x210
lr : dev_index_reserve+0x100/0x210
sp : ffff800096a878e0
x29: ffff800096a87930 x28: ffff0000d04380d0 x27: ffff0000d04380f8
x26: ffff0000d04380f0 x25: 1ffff00012d50f20 x24: 1ffff00012d50f1c
x23: dfff800000000000 x22: ffff8000929c21c0 x21: 00000000ffffffea
x20: ffff0000d04380e0 x19: ffff800096a87900 x18: ffff800096a874c0
x17: ffff800084df5008 x16: ffff80008051f9c4 x15: 0000000000000001
x14: 1fffe0001a087198 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000d41c9bc0 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800091763d88 x4 : 0000000000000000 x3 : ffff800084e04748
x2 : 0000000000000001 x1 : 00000000fead71c7 x0 : 0000000000000000
Call trace:
dev_index_reserve+0x104/0x210
register_netdevice+0x598/0x1074 net/core/dev.c:10084
tun_set_iff+0x630/0xb0c drivers/net/tun.c:2850
__tun_chr_ioctl+0x788/0x2af8 drivers/net/tun.c:3118
tun_chr_ioctl+0x38/0x4c drivers/net/tun.c:3403
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595
irq event stamp: 11348
hardirqs last enabled at (11347): [<ffff80008a716574>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline]
hardirqs last enabled at (11347): [<ffff80008a716574>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194
hardirqs last disabled at (11348): [<ffff80008a627820>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:436
softirqs last enabled at (11138): [<ffff8000887ca53c>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
softirqs last enabled at (11138): [<ffff8000887ca53c>] release_sock+0x15c/0x1b0 net/core/sock.c:3531
softirqs last disabled at (11136): [<ffff8000887ca41c>] spin_lock_bh include/linux/spinlock.h:356 [inline]
softirqs last disabled at (11136): [<ffff8000887ca41c>] release_sock+0x3c/0x1b0 net/core/sock.c:3518

Fixes: fb7589a16216 ("tun: Add ability to create tun device with given index")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20231016180851.3560092-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc()

Currently the code disables WUC only disables it for ioremap_wc(), which
is only used when mapping writecombine pages like ioremap() (mapped to
the kernel space). But for VRAM mapped in TTM/GEM, it is mapped with a
crafted pgprot by the pgprot_writecombine() function, in which case WUC
isn't disabled now.

Disable WUC for pgprot_writecombine() (fallback to SUC) if needed, like
ioremap_wc().

This improves the AMDGPU driver's stability (solves some misrendering)
on Loongson-3A5000/3A6000 machines.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()

Replace kmap_atomic()/kunmap_atomic() calls with kmap_local_page()/
kunmap_local() in copy_user_highpage() which can be invoked from both
preemptible and atomic context [1].

[1] https://lore.kernel.org/all/20201029222652.302358281@linutronix.de/

Suggested-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Export symbol invalid_pud_table for modules building

Export symbol invalid_pud_table for modules building (such as the KVM
module) if 4-level page tables enabled. Otherwise we get:

ERROR: modpost: "invalid_pud_table" [arch/loongarch/kvm/kvm.ko] undefined!

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Use SYM_CODE_* to annotate exception handlers

As described in include/linux/linkage.h,

  FUNC -- C-like functions (proper stack frame etc.)
  CODE -- non-C code (e.g. irq handlers with different, special stack etc.)

  SYM_FUNC_{START, END} -- use for global functions
  SYM_CODE_{START, END} -- use for non-C (special) functions

So use SYM_CODE_* to annotate exception handlers.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

gpu/drm: Eliminate DRM_SCHED_PRIORITY_UNSET

Eliminate DRM_SCHED_PRIORITY_UNSET, value of -2, whose only user was
amdgpu. Furthermore, eliminate an index bug, in that when amdgpu boots, it
calls drm_sched_entity_init() with DRM_SCHED_PRIORITY_UNSET, which uses it to
index sched->sched_rq[].

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231017035656.8211-2-luben.tuikov@amd.com

drm/amdgpu: Unset context priority is now invalid

A context priority value of AMD_CTX_PRIORITY_UNSET is now invalid--instead of
carrying it around and passing it to the Direct Rendering Manager--and it
becomes AMD_CTX_PRIORITY_NORMAL in amdgpu_ctx_ioctl(), the gateway to context
creation.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231017035656.8211-1-luben.tuikov@amd.com

tcp: fix excessive TLP and RACK timeouts from HZ rounding

We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.

This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.

Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'fbdev-for-6.6-rc7' of git://git./linux/kernel/git/deller/linux-fbdev

Pull fbdev fixes and cleanups from Helge Deller:
"Various minor fixes, cleanups and annotations for atyfb, sa1100fb,
  omapfb, uvesafb and mmp"

* tag 'fbdev-for-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: core: syscopyarea: fix sloppy typing
  fbdev: core: cfbcopyarea: fix sloppy typing
  fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
  fbdev: uvesafb: Remove uvesafb_exec() prototype from include/video/uvesafb.h
  fbdev: sa1100fb: mark sa1100fb_init() static
  fbdev: omapfb: fix some error codes
  fbdev: atyfb: only use ioremap_uc() on i386 and ia64
  fbdev: mmp: Annotate struct mmp_path with __counted_by
  fbdev: mmp: Annotate struct mmphw_ctrl with __counted_by

powerpc/64s/radix: Don't warn on copros in radix__tlb_flush()

Sachin reported a warning when running the inject-ra-err selftest:

  # selftests: powerpc/mce: inject-ra-err
  Disabling lock debugging due to kernel taint
  MCE: CPU19: machine check (Severe)  Real address Load/Store (foreign/control memory) [Not recovered]
  MCE: CPU19: PID: 5254 Comm: inject-ra-err NIP: [0000000010000e48]
  MCE: CPU19: Initiator CPU
  MCE: CPU19: Unknown
  ------------[ cut here ]------------
  WARNING: CPU: 19 PID: 5254 at arch/powerpc/mm/book3s64/radix_tlb.c:1221 radix__tlb_flush+0x160/0x180
  CPU: 19 PID: 5254 Comm: inject-ra-err Kdump: loaded Tainted: G   M        E      6.6.0-rc3-00055-g9ed22ae6be81 #4
  Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1030.20 (NH1030_058) hv:phyp pSeries
  ...
  NIP radix__tlb_flush+0x160/0x180
  LR  radix__tlb_flush+0x104/0x180
  Call Trace:
    radix__tlb_flush+0xf4/0x180 (unreliable)
    tlb_finish_mmu+0x15c/0x1e0
    exit_mmap+0x1a0/0x510
    __mmput+0x60/0x1e0
    exit_mm+0xdc/0x170
    do_exit+0x2bc/0x5a0
    do_group_exit+0x4c/0xc0
    sys_exit_group+0x28/0x30
    system_call_exception+0x138/0x330
    system_call_vectored_common+0x15c/0x2ec

And bisected it to commit e43c0a0c3c28 ("powerpc/64s/radix: combine
final TLB flush and lazy tlb mm shootdown IPIs"), which added a warning
in radix__tlb_flush() if mm->context.copros is still elevated.

However it's possible for the copros count to be elevated if a process
exits without first closing file descriptors that are associated with a
copro, eg. VAS.

If the process exits with a VAS file still open, the release callback
is queued up for exit_task_work() via:
  exit_files()
    put_files_struct()
      close_files()
        filp_close()
          fput()

And called via:
  exit_task_work()
    ____fput()
      __fput()
        file->f_op->release(inode, file)
          coproc_release()
            vas_user_win_ops->close_win()
              vas_deallocate_window()
                mm_context_remove_vas_window()
                  mm_context_remove_copro()

But that is after exit_mm() has been called from do_exit() and triggered
the warning.

Fix it by dropping the warning, and always calling __flush_all_mm().

In the normal case of no copros, that will result in a call to
_tlbiel_pid(mm->context.id, RIC_FLUSH_ALL) just as the current code
does.

If the copros count is elevated then it will cause a global flush, which
should flush translations from any copros. Note that the process table
entry was cleared in arch_exit_mmap(), so copros should not be able to
fetch any new translations.

Fixes: e43c0a0c3c28 ("powerpc/64s/radix: combine final TLB flush and lazy tlb mm shootdown IPIs")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Closes: https://lore.kernel.org/all/A8E52547-4BF1-47CE-8AEA-BC5A9D7E3567@linux.ibm.com/
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://msgid.link/20231017121527.1574104-1-mpe@ellerman.id.au

selftests/user_events: Fix abi_test for BE archs

The abi_test currently uses a long sized test value for enablement
checks. On LE this works fine, however, on BE this results in inaccurate
assert checks due to a bit being used and assuming it's value is the
same on both LE and BE.

Use int type for 32-bit values and long type for 64-bit values to ensure
appropriate behavior on both LE and BE.

Fixes: 60b1af8de8c1 ("tracing/user_events: Add ABI self-test")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge tag 'thunderbolt-for-v6.6-rc7' of git://git./linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fix for v6.6-rc7

This includes a single commit that fixes a memory leak when DisplayPort
bandwidth allocation request is being handled by the driver.

This has been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Call tb_switch_put() once DisplayPort bandwidth request is finished

ASoC: da7219: Correct the process of setting up Gnd switch in AAD

Enable Gnd switch to improve stability when Jack insert event
occurs, and then disable Gnd switch after Jack type detection
is finished.

Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231017021258.5929-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

gve: Do not fully free QPL pages on prefill errors

The prefill function should have only removed the page count bias it
added. Fully freeing the page will cause gve_free_queue_page_list to
free a page the driver no longer owns.

Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path")
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/r/20231014014121.2843922-1-shailend@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

x86/sev: Check for user-space IOIO pointing to kernel space

Check the memory operand of INS/OUTS before emulating the instruction.
The #VC exception can get raised from user-space, but the memory operand
can be manipulated to access kernel memory before the emulation actually
begins and after the exception handler has run.

[ bp: Massage commit message. ]

Fixes: 597cfe48212a ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>

ALSA: hda/realtek - Fixed ASUS platform headset Mic issue

ASUS platform Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1155d914c20c40569f56d36c79254879@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: Add quirk for ASUS ROG GU603ZV

Enables the SPI-connected Cirrus amp and the required pins
for headset mic detection.

As of BIOS version 313 it is still necessary to modify the
ACPI table to add the related _DSD properties:
https://gist.github.com/Flex1911/1bce378645fc95a5743671bd5deabfc8

Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231014075044.17474-1-dedsa2002@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq5xxx

This HP Laptop uses ALC236 codec with COEF 0x07 controlling the
mute LED. Enable existing quirk for this device.

Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231016221328.1521674-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

x86/boot: efistub: Assign global boot_params variable

Now that the x86 EFI stub calls into some APIs exposed by the
decompressor (e.g., kaslr_get_random_long()), it is necessary to ensure
that the global boot_params variable is set correctly before doing so.

Note that the decompressor and the kernel proper carry conflicting
declarations for the global variable 'boot_params' so refer to it via an
alias to work around this.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

nfsd: lock_rename() needs both directories to live on the same fs

... checking that after lock_rename() is too late. Incidentally,
NFSv2 had no nfserr_xdev...

Fixes: aa387d6ce153 "nfsd: fix EXDEV checking in rename"
Cc: stable@vger.kernel.org # v3.9+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'probes-fixes-v6.6-rc6' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

- Fix fprobe document to add a new ret_ip parameter for callback
   functions. This has been introduced in v6.5 but the document was not
   updated.

- Fix fprobe to check the number of active retprobes is not zero. This
   number is passed from parameter or calculated by the parameter and it
   can be zero which is not acceptable. But current code only check it
   is not minus.

* tag 'probes-fixes-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  fprobe: Fix to ensure the number of active retprobes is not zero
  Documentation: probes: Add a new ret_ip callback parameter

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

   - Fix the handling of the phycal timer offset when FEAT_ECV and
     CNTPOFF_EL2 are implemented

   - Restore the functionnality of Permission Indirection that was
     broken by the Fine Grained Trapping rework

   - Cleanup some PMU event sharing code

  MIPS:

   - Fix W=1 build

  s390:

   - One small fix for gisa to avoid stalls

  x86:

   - Truncate writes to PMU counters to the counter's width to avoid
     spurious overflows when emulating counter events in software

   - Set the LVTPC entry mask bit when handling a PMI (to match
     Intel-defined architectural behavior)

   - Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
     to kick the guest out of emulated halt

   - Fix for loading XSAVE state from an old kernel into a new one

   - Fixes for AMD AVIC

  selftests:

   - Play nice with %llx when formatting guest printf and assert
     statements

   - Clean up stale test metadata

   - Zero-initialize structures in memslot perf test to workaround a
     suspected 'may be used uninitialized' false positives from GCC"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
  KVM: arm64: POR{E0}_EL1 do not need trap handlers
  KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
  KVM: MIPS: fix -Wunused-but-set-variable warning
  KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
  KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
  x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
  x86: KVM: SVM: add support for Invalid IPI Vector interception
  x86: KVM: SVM: always update the x2avic msr interception
  KVM: selftests: Force load all supported XSAVE state in state test
  KVM: selftests: Load XSAVE state into untouched vCPU during state test
  KVM: selftests: Touch relevant XSAVE state in guest for state test
  KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
  x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
  KVM: selftests: Zero-initialize entire test_result in memslot perf test
  KVM: selftests: Remove obsolete and incorrect test case metadata
  KVM: selftests: Treat %llx like %lx when formatting guest printf
  KVM: x86/pmu: Synthesize at most one PMI per VM-exit
  KVM: x86: Mask LVTPC when handling a PMI
  KVM: x86/pmu: Truncate counter value to allowed width on write
  ...

fprobe: Fix to ensure the number of active retprobes is not zero

The number of active retprobes can be zero but it is not acceptable,
so return EINVAL error if detected.

Link: https://lore.kernel.org/all/169750018550.186853.11198884812017796410.stgit@devnote2/
Reported-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Closes: https://lore.kernel.org/all/20231016222103.cb9f426edc60220eabd8aa6a@kernel.org/
Fixes: 5b0ab78998e3 ("fprobe: Add exit_handler support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Documentation: probes: Add a new ret_ip callback parameter

Add a new ret_ip callback parameter description.

Link: https://lore.kernel.org/all/169556257133.146934.13560704846459957726.stgit@devnote2/
Fixes: cb16330d1274 ("fprobe: Pass return address to the handlers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Florent Revest <revest@chromium.org>

scsi: qla2xxx: Fix double free of dsd_list during driver load

On driver load, scsi_add_host() can fail. This triggers the free path to
call qla2x00_mem_free() multiple times. This causes NULL pointer access of
ha->base_qpair. Add check before access.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
IP: [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx]
PGD 8000001fcfe4a067 PUD 1fc8f0a067 PMD 0
Oops: 0000 [#1] SMP
RIP: 0010:[<ffffffffc118f73c>]  [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx]
RSP: 0018:ffff8ace97a93a30  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8ace8efd0000 RCX: 000000000000488f
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8ace97a93a60 R08: 000000000001f040 R09: ffffffff8678209b
R10: ffff8acf7d6df040 R11: ffffc591c0fcc980 R12: ffffffff87034800
R13: ffff8acf0e3cc740 R14: ffff8ace8efd0000 R15: 00000000fffffff4
FS:  00007f4cf5449740(0000) GS:ffff8acf7d6c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000001fc2f6c000 CR4: 00000000007607e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  [<ffffffff86781f18>] ? kobject_put+0x28/0x60
  [<ffffffffc119a59c>] qla2x00_probe_one+0x19fc/0x3040 [qla2xxx]

Fixes: efeda3bf912f ("scsi: qla2xxx: Move resource to allow code reuse")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20231016101749.5059-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix in error path

The driver should be deregistered as misc driver after PCI registration
failure.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20231015114529.10725-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge tag 'for-net-2023-10-13' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- Fix race when opening vhci device
- Avoid memcmp() out of bounds warning
- Correctly bounds check and pad HCI_MON_NEW_INDEX name
- Fix using memcmp when comparing keys
- Ignore error return for hci_devcd_register() in btrtl
- Always check if connection is alive before deleting
- Fix a refcnt underflow problem for hci_conn

* tag 'for-net-2023-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name
  Bluetooth: avoid memcmp() out of bounds warning
  Bluetooth: hci_sock: fix slab oob read in create_monitor_event
  Bluetooth: btrtl: Ignore error return for hci_devcd_register()
  Bluetooth: hci_event: Fix coding style
  Bluetooth: hci_event: Fix using memcmp when comparing keys
  Bluetooth: Fix a refcnt underflow problem for hci_conn
  Bluetooth: hci_sync: always check if connection is alive before deleting
  Bluetooth: Reject connection with the device which has same BD_ADDR
  Bluetooth: hci_event: Ignore NULL link key
  Bluetooth: ISO: Fix invalid context error
  Bluetooth: vhci: Fix race when opening vhci device
====================

Link: https://lore.kernel.org/r/20231014031336.1664558-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: nci: fix possible NULL pointer dereference in send_acknowledge()

Handle memory allocation failure from nci_skb_alloc() (calling
alloc_skb()) to avoid possible NULL pointer dereference.

Reported-by: 黄思聪 <huangsicong@iie.ac.cn>
Fixes: 391d8a2da787 ("NFC: Add NCI over SPI receive")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231013184129.18738-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: Correct offload_xstats size

rtnl_offload_xstats_get_size_hw_s_info_one() conditionalizes the
size-computation for IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED based on whether
or not the device has offload_xstats enabled.

However, rtnl_offload_xstats_fill_hw_s_info_one() is adding the u8 for
that field uncondtionally.

syzkaller triggered a WARNING in rtnl_stats_get due to this:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 754 at net/core/rtnetlink.c:5982 rtnl_stats_get+0x2f4/0x300
Modules linked in:
CPU: 0 PID: 754 Comm: syz-executor148 Not tainted 6.6.0-rc2-g331b78eb12af #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:rtnl_stats_get+0x2f4/0x300 net/core/rtnetlink.c:5982
Code: ff ff 89 ee e8 7d 72 50 ff 83 fd a6 74 17 e8 33 6e 50 ff 4c 89 ef be 02 00 00 00 e8 86 00 fa ff e9 7b fe ff ff e8 1c 6e 50 ff <0f> 0b eb e5 e8 73 79 7b 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc900006837c0 EFLAGS: 00010293
RAX: ffffffff81cf7f24 RBX: ffff8881015d9000 RCX: ffff888101815a00
RDX: 0000000000000000 RSI: 00000000ffffffa6 RDI: 00000000ffffffa6
RBP: 00000000ffffffa6 R08: ffffffff81cf7f03 R09: 0000000000000001
R10: ffff888101ba47b9 R11: ffff888101815a00 R12: ffff8881017dae00
R13: ffff8881017dad00 R14: ffffc90000683ab8 R15: ffffffff83c1f740
FS: 00007fbc22dbc740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000046 CR3: 000000010264e003 CR4: 0000000000170ef0
Call Trace:
<TASK>
rtnetlink_rcv_msg+0x677/0x710 net/core/rtnetlink.c:6480
netlink_rcv_skb+0xea/0x1c0 net/netlink/af_netlink.c:2545
netlink_unicast+0x430/0x500 net/netlink/af_netlink.c:1342
netlink_sendmsg+0x4fc/0x620 net/netlink/af_netlink.c:1910
sock_sendmsg+0xa8/0xd0 net/socket.c:730
____sys_sendmsg+0x22a/0x320 net/socket.c:2541
___sys_sendmsg+0x143/0x190 net/socket.c:2595
__x64_sys_sendmsg+0xd8/0x150 net/socket.c:2624
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7fbc22e8d6a9
Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc4320e778 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004007d0 RCX: 00007fbc22e8d6a9
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000004007d0
R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffc4320e898
R13: 00007ffc4320e8a8 R14: 00000000004004a0 R15: 00007fbc22fa5a80
</TASK>
---[ end trace 0000000000000000 ]---

Which didn't happen prior to commit bf9f1baa279f ("net: add dedicated
kmem_cache for typical/small skb->head") as the skb always was large
enough.

Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20231013041448.8229-1-cpaasch@apple.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: return the right falback reason when prefix checks fail

In the smc_listen_work(), if smc_listen_prfx_check() failed,
the real reason: SMC_CLC_DECL_DIFFPREFIX was dropped, and
SMC_CLC_DECL_NOSMCDEV was returned.

Althrough this is also kind of SMC_CLC_DECL_NOSMCDEV, but return
the real reason is much friendly for debugging.

Fixes: e49300a6bf62 ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20231012123729.29307-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

fbdev: core: syscopyarea: fix sloppy typing

In sys_copyarea(), the local variable bits_per_line is needlessly typed as
*unsigned long* -- which is a 32-bit type on the 32-bit arches and a 64-bit
type on the 64-bit arches; that variable's value is derived from the __u32
typed fb_fix_screeninfo::line_length field (multiplied by 8u) and a 32-bit
*unsigned int* type should still be enough to store the # of bits per line.

Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: core: cfbcopyarea: fix sloppy typing

In cfb_copyarea(), the local variable bits_per_line is needlessly typed as
*unsigned long* -- which is a 32-bit type on the 32-bit arches and a 64-bit
type on the 64-bit arches; that variable's value is derived from the __u32
typed fb_fix_screeninfo::line_length field (multiplied by 8u) and a 32-bit
*unsigned int* type should still be enough to store the # of bits per line.

Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()

Delete the v86d netlink only after all the VBE tasks have been
completed.

Fixes initial state restore on module unload:
uvesafb: VBE state restore call failed (eax=0x4f04, err=-19)

Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: uvesafb: Remove uvesafb_exec() prototype from include/video/uvesafb.h

uvesafb_exec() is a static function defined and called only in
drivers/video/fbdev/uvesafb.c, remove the prototype from
include/video/uvesafb.h.

Fixes the warning:
./include/video/uvesafb.h:112:12: warning: 'uvesafb_exec' declared 'static' but never defined [-Wunused-function]
when including '<video/uvesafb.h>' in an external program.

Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: sa1100fb: mark sa1100fb_init() static

This is a global function that is only referenced as an initcall. This causes
a warning:

drivers/video/fbdev/sa1100fb.c:1218:12: error: no previous prototype for 'sa1100fb_init' [-Werror=missing-prototypes]

Make it static instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

fbdev: omapfb: fix some error codes

Return negative -ENXIO instead of positive ENXIO.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>

drm/mediatek: Correctly free sg_table in gem prime vmap

The MediaTek DRM driver implements GEM PRIME vmap by fetching the
sg_table for the object, iterating through the pages, and then
vmapping them. In essence, unlike the GEM DMA helpers which vmap
when the object is first created or imported, the MediaTek version
does it on request.

Unfortunately, the code never correctly frees the sg_table contents.
This results in a kernel memory leak. On a Hayato device with a text
console on the internal display, this results in the system running
out of memory in a few days from all the console screen cursor updates.

Add sg_free_table() to correctly free the contents of the sg_table. This
was missing despite explicitly required by mtk_gem_prime_get_sg_table().

Also move the "out" shortcut label to after the kfree() call for the
sg_table. Having sg_free_table() together with kfree() makes more sense.
The shortcut is only used when the object already has a kernel address,
in which case the pointer is NULL and kfree() does nothing. Hence this
change causes no functional change.

Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004083226.1940055-1-wenst@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/edid: add 8 bpc quirk to the BenQ GW2765

The BenQ GW2765 reports that it supports higher (> 8) bpc modes, but
when trying to set them we end up with a black screen. So, limit it to 8
bpc modes.

Cc: stable@vger.kernel.org # 6.5+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2610
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012184927.133137-1-hamza.mahfooz@amd.com

pinctrl: qcom: lpass-lpi: fix concurrent register updates

The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers. However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.

Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.

Protect from concurrent access by re-using the same lock used to cover
the slew rate register. Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.

Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013145705.219954-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drm/ttm: Reorder sys manager cleanup step

With the current cleanup flow, we could trigger a NULL pointer
dereference if there is a delayed destruction of a BO with a
system resource that gets executed on drain_workqueue() call,
as we attempt to free a resource using an already released
resource manager.

Remove the device from the device list and drain its workqueue
before releasing the system domain manager in ttm_device_fini().

Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016121525.2237838-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

s390/kasan: handle DCSS mapping in memory holes

When physical memory is defined under z/VM using DEF STOR CONFIG, there
may be memory holes that are not hotpluggable memory. In such cases,
DCSS mapping could be placed in one of these memory holes. Subsequently,
attempting memory access to such DCSS mapping would result in a kasan
failure because there is no shadow memory mapping for it.

To maintain consistency with cases where DCSS mapping is positioned after
the kernel identity mapping, which is then covered by kasan zero shadow
mapping, handle the scenario above by populating zero shadow mapping
for memory holes where DCSS mapping could potentially be placed.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/cio: fix a memleak in css_alloc_subchannel

When dma_set_coherent_mask() fails, sch->lock has not been
freed, which is allocated in css_sch_create_locks(), leading
to a memleak.

Fixes: 4520a91a976e ("s390/cio: use dma helpers for setting masks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Message-Id: <20230921071412.13806-1-dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/linux-s390/bd38baa8-7b9d-4d89-9422-7e943d626d6e@linux.ibm.com/
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

tools/virtio: Add dma sync api for virtio test

Fixes: 8bd2f71054bd ("virtio_ring: introduce dma sync api for virtqueue")
also add dma sync api for virtio test.

Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Message-Id: <20231008031734.1095-1-liming.wu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

mtd: rawnand: Ensure the nand chip supports cached reads

Both the JEDEC and ONFI specification say that read cache sequential
support is an optional command. This means that we not only need to
check whether the individual controller supports the command, we also
need to check the parameter pages for both ONFI and JEDEC NAND flashes
before enabling sequential cache reads.

This fixes support for NAND flashes which don't support enabling cache
reads, i.e. Samsung K9F4G08U0F or Toshiba TC58NVG0S3HTA00.

Sequential cache reads are now only available for ONFI and JEDEC
devices, if individual vendors implement this, it needs to be enabled
per vendor.

Tested on i.MX6Q with a Samsung NAND flash chip that doesn't support
sequential reads.

Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230922141717.35977-1-r.czerwinski@pengutronix.de

USB: serial: option: add Fibocom to DELL custom modem FM101R-GL

Update the USB serial option driver support for the Fibocom
FM101R-GL LTE modules as there are actually several different variants.

- VID:PID 413C:8213, FM101R-GL are laptop M.2 cards (with
  MBIM interfaces for Linux)

- VID:PID 413C:8215, FM101R-GL ESIM are laptop M.2 cards (with
  MBIM interface for Linux)

0x8213: mbim, tty
0x8215: mbim, tty

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=8213 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=a3b7cbf0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=8215 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=a3b7cbf0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

Linux 6.6-rc6

Merge branch 'ovs-selftests'

From: Aaron Conole <aconole@redhat.com>
To: netdev@vger.kernel.org
Cc: dev@openvswitch.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org, Pravin B Shelar <pshelar@ovn.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Adrian Moreno <amorenoz@redhat.com>,
Eelco Chaudron <echaudro@redhat.com>,
shuah@kernel.org
Subject: [PATCH net v2 0/4] selftests: openvswitch: Minor fixes for some systems
Date: Wed, 11 Oct 2023 15:49:35 -0400 [thread overview]
Message-ID: <20231011194939.704565-1-aconole@redhat.com> (raw)

A number of corner cases were caught when trying to run the selftests on
older systems. Missed skip conditions, some error cases, and outdated
python setups would all report failures but the issue would actually be
related to some other condition rather than the selftest suite.

Address these individual cases.
====================

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Fix the ct_tuple for v4

The ct_tuple v4 data structure decode / encode routines were using
the v6 IP address decode and relying on default encode. This could
cause exceptions during encode / decode depending on how a ct4
tuple would appear in a netlink message.

Caught during code review.

Fixes: e52b07aa1a54 ("selftests: openvswitch: add flow dump support")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Skip drop testing on older kernels

Kernels that don't have support for openvswitch drop reasons also
won't have the drop counter reasons, so we should skip the test
completely. It previously wasn't possible to build a test case
for this without polluting the datapath, so we introduce a mechanism
to clear all the flows from a datapath allowing us to test for
explicit drop actions, and then clear the flows to build the
original test case.

Fixes: 4242029164d6 ("selftests: openvswitch: add explicit drop testcase")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Catch cases where the tests are killed

In case of fatal signal, or early abort at least cleanup the current
test case.

Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: openvswitch: Add version check for pyroute2

Paolo Abeni reports that on some systems the pyroute2 version isn't
new enough to run the test suite.  Ensure that we support a minimum
version of 0.6 for all cases (which does include the existing ones).
The 0.6.1 version was released in May of 2021, so should be
propagated to most installations at this point.

The alternative that Paolo proposed was to only skip when the
add-flow is being run.  This would be okay for most cases, except
if a future test case is added that needs to do flow dump without
an associated add (just guessing).  In that case, it could also be
broken and we would need additional skip logic anyway.  Just draw
a line in the sand now.

Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "x86/smp: Put CPUs into INIT on shutdown if possible"

This reverts commit 45e34c8af58f23db4474e2bfe79183efec09a18b, and the
two subsequent fixes to it:

  3f874c9b2aae ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
  b1472a60a584 ("x86/smp: Don't send INIT to boot CPU")

because it seems to result in hung machines at shutdown.  Particularly
some Dell machines, but Thomas says

"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
  at least that's what I could figure out from the various bug reports.

  I don't know which CPUs the DELL machines have, so I can't say it's a
  pattern.

  I agree with the revert for now"

Ashok Raj chimes in:

"There was a report (probably this same one), and it turns out it was a
  bug in the BIOS SMI handler.

  The client BIOS's were waiting for the lowest APICID to be the SMI
  rendevous master. If this is MeteorLake, the BSP wasn't the one with
  the lowest APIC and it triped here.

  The BIOS change is also being pushed to others for assimilation :)

  Server BIOS's had this correctly for a while now"

and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).

Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>