Dmytro Laktyushkin [Wed, 30 Mar 2022 20:05:50 +0000 (16:05 -0400)]
drm/amd/display: update dcn315 clock table read
[Why & How]
Make dcn315 base its clock table off dcfclk rather than fclk.
This change also adds some sanity checking to make sure an
empty pmfw table does not result in invalid dal clocks.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Grigory Vasilyev [Mon, 4 Apr 2022 23:33:04 +0000 (02:33 +0300)]
drm/amdgpu: Remove leftover igp_lane_info
Variable igp_lane_info always is 0. 0 & any value = 0 and false.
In this way, all сonditional statements will false.
The code was leftover from when the code was ported from radeon
where igp_lane_info was derived from the vbios on supported
platforms.
[update commit message - Alex]
Signed-off-by: Grigory Vasilyev <h0tc0d3@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Rix [Mon, 4 Apr 2022 22:57:10 +0000 (18:57 -0400)]
drm/radeon: change si_default_state table from global to static
Smatch reports these issues
si_blit_shaders.c:31:11: warning: symbol 'si_default_state'
was not declared. Should it be static?
si_blit_shaders.c:253:11: warning: symbol 'si_default_size'
was not declared. Should it be static?
Both symbols are only used in si.c. Single file symbols
should be static. So move the definition of
si_default_state and si_default_size to si_blit_shader.h
and change their storage-class-specifier to static.
Remove unneeded si_blit_shader.c
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Benjamin Marty [Wed, 23 Mar 2022 21:08:26 +0000 (22:08 +0100)]
drm/amdgpu/display: change pipe policy for DCN 2.1
Fixes crash on MST Hub disconnect.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849
Fixes:
ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Signed-off-by: Benjamin Marty <info@benjaminmarty.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guo Zhengkui [Fri, 1 Apr 2022 02:59:29 +0000 (10:59 +0800)]
drm/radeon: simplify if-if to if-else
Replace `if (!ret)` with `else` for simplification.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 4 Apr 2022 21:25:23 +0000 (17:25 -0400)]
drm/amdkfd: Add missing NULL check in svm_range_map_to_gpu
bo_adev is NULL for system memory mapping to GPU.
Fixes:
30671b44aa570a ("drm/amdgpu: fix TLB flushing during eviction")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sat, 26 Mar 2022 19:20:21 +0000 (15:20 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.111.0
- Add options to allow for configurable PHY options during PSR active
state
- Remove unused versioning and git hash
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Wed, 23 Mar 2022 20:06:25 +0000 (16:06 -0400)]
drm/amd/display: Check for invalid input params when building scaling params
[WHY]
Function to calculate scaling ratios can be called with invalid plane
src/dest, causing a divide by zero.
[HOW]
Fail building scaling params if plane state src/dest rects are
unpopulated
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Hanghong) Ma [Wed, 23 Mar 2022 19:35:57 +0000 (15:35 -0400)]
drm/amd/display: Move link_trace for edp to dp_trace
[Why & How]
The dp_trace structure is self contained component designed for
all dp trace, and the edp link trace should be a part of it;
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 28 Mar 2022 13:41:01 +0000 (09:41 -0400)]
drm/amd/display: 3.2.180
- [FW Promotion] Release 0.0.111.0
- Check for invalid input params when building scaling params
- Move link_trace for edp to dp_trace
- Fix missing-prototypes warning
- Enable 3 plane for DCN 3.0 and 3.02
- Extract set stream attribute into link_hwss
- Revert Power down hardware if timer not trigger
- Add support for handling 128b/132b link training test request
- Add configuration options for AUX wake work around
- Remove underflow IRQ type
- Add flip interval workaround for low FPS in some game
- Remove assert for odm transition case
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Becle Lee [Mon, 28 Mar 2022 03:18:23 +0000 (11:18 +0800)]
drm/amd/display: fix missing-prototypes warning
[Why]
No declaration of hubp1_wait_pipe_read_start found in header file.
[How]
Add its declaration.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Becle Lee <becle.lee@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Krunoslav Kovac [Fri, 25 Mar 2022 18:41:49 +0000 (14:41 -0400)]
drm/amd/display: Enable 3 plane for DCN 3.0 and 3.02
[WHY&HOW]
Increase num of bottom planes to 2. Note that DCN 3.03 is left out
since it has max 2 planes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 24 Mar 2022 21:24:55 +0000 (17:24 -0400)]
drm/amd/display: extract set stream attribute to link_hwss
[why]
Extract set stream attribute into link_hwss as part of the link hwss
refactor work.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Fri, 25 Mar 2022 16:48:57 +0000 (12:48 -0400)]
drm/amd/display: revert Power down hardware if timer not trigger
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Fri, 18 Mar 2022 16:22:35 +0000 (12:22 -0400)]
drm/amd/display: add support for handling 128b/132b link training test request
[why]
DP2.x added new enum values for UHBR link rates in link training test
request for test automation. We need to add UHBR link rates test request
support in preparation for compliance test automation.
[how]
added a function that translate test link rate to dc link rate. Call
the translation function to decide the requested test link rate.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jimmy Kizito [Tue, 22 Mar 2022 23:12:47 +0000 (19:12 -0400)]
drm/amd/display: Add configuration options for AUX wake work around.
[Why]
Work around to try to wake unresponsive DP sinks may need to be adjusted
for certain sinks.
[How]
Add options to disable work around or adjust time spent trying to wake
unresponsive DPRX.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Angus Wang [Wed, 23 Mar 2022 16:40:16 +0000 (12:40 -0400)]
drm/amd/display: Remove underflow IRQ type
[WHY]
Feature using the underflow IRQ type reverted
[HOW]
Removed underflow IRQ type entry
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Angus Wang <Angus.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Angus Wang [Tue, 22 Mar 2022 19:37:15 +0000 (15:37 -0400)]
drm/amd/display: Add flip interval workaround
[WHY]
Some games experience low FPS issues when FreeSync is on and VSync is
toggled to half refresh rate.
[HOW]
First create a function to determine workaround conditions, which is
when we detect 2 or more VSync interrupts between flips and a very short
VSync to flip interval. We do the workaround during VSync interrupts and
set the v_total_max and min to nominal. We also cleanup after we exit
the game.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Angus Wang <Angus.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Mon, 21 Mar 2022 14:42:34 +0000 (10:42 -0400)]
drm/amd/display: remove assert for odm transition case
Remove assert that will hit during odm transition case,
since this is a valid case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 1 Apr 2022 19:30:12 +0000 (15:30 -0400)]
drm/amdgpu: Flush TLB after mapping for VG20+XGMI
For VG20 + XGMI bridge, all mappings PTEs cache in TC, this may have
stall invalid PTEs in TC because one cache line has 8 pages. Need always
flush_tlb after updating mapping.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 25 Mar 2022 15:53:39 +0000 (11:53 -0400)]
drm/amdgpu: don't use BACO for reset in S3
Seems to cause a reboots or hangs on some systems.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953
Fixes:
daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Haowen Bai [Fri, 1 Apr 2022 06:28:05 +0000 (14:28 +0800)]
drm/amdgpu/vcn: Remove unneeded semicolon
report by coccicheck:
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:1951:2-3: Unneeded semicolon
Fixes:
c543dcbe4237 ("drm/amdgpu/vcn: Add VCN ras error query support")
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aashish Sharma [Thu, 24 Mar 2022 13:40:31 +0000 (19:10 +0530)]
drm/amd/display: Fix unused-but-set-variable warning
Fix the kernel test robot warning below:
drivers/gpu/drm/amd/amdgpu/../display/dmub/inc/dmub_cmd.h:2893:12:
warning: variable 'temp' set but not used [-Wunused-but-set-variable]
Replaced the assignment to the unused temp variable with READ_ONCE()
macro to flush the writes. READ_ONCE() helps avoid the use of
volatile and makes it obvious from the code that the read here is
intentional. Also verified on x86 that the generated code is exactly the
same as before.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Aashish Sharma <shraash@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marko Zekovic [Mon, 28 Mar 2022 10:37:30 +0000 (12:37 +0200)]
amdgpu/pm: Enable sysfs nodes for vclk and dclk for NAVI12
SMI clock measure API is failing on NAVI12, because
sysfs node for pp_dpm_vclk is not existing. Enable
sysfs node for pp_dpm_vclk for NAVI12.
v2: Also enable sysfs node for pp_dpm_dclk.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Marko Zekovic <Marko.Zekovic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 30 Mar 2022 08:53:15 +0000 (10:53 +0200)]
drm/amdgpu: fix TLB flushing during eviction
Testing the valid bit is not enough to figure out if we
need to invalidate the TLB or not.
During eviction it is quite likely that we move a BO from VRAM to GTT and
update the page tables immediately to the new GTT address.
Rework the whole function to get all the necessary parameters directly as
value.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CHANDAN VURDIGERE NATARAJ [Tue, 29 Mar 2022 07:40:31 +0000 (13:10 +0530)]
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.
[ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
[ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12
d726c6a2d6ebe5cf9223931cbca6892f916fe18b
[ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
[ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
[ 100.781269] RSP: 0018:
ffffa9230079eeb0 EFLAGS:
00010246
[ 100.812528] RAX:
2d33302d32323032 RBX:
0000000000000500 RCX:
0000000000000000
[ 100.819656] RDX:
0000000000000001 RSI:
ffff99deb712c49c RDI:
0000000000000000
[ 100.826781] RBP:
ffffa9230079ef50 R08:
ffff99deb712460c R09:
ffff99deb712462c
[ 100.833907] R10:
ffff99deb7124940 R11:
ffff99deb7124d70 R12:
ffff99deb712ae44
[ 100.841033] R13:
0000000000000001 R14:
0000000000000000 R15:
ffffa9230079f0a0
[ 100.848159] FS:
00007af121212640(0000) GS:
ffff99deba780000(0000) knlGS:
0000000000000000
[ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 100.861980] CR2:
0000209000fe1000 CR3:
000000011b18c000 CR4:
0000000000350ee0
[ 100.869106] Call Trace:
[ 100.871555] <TASK>
[ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20
[ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd
[ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
[ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.899874] ? __sprint_symbol+0x80/0x135
[ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2
[ 100.908500] ? symbol_string+0xb7/0xde
[ 100.912250] ? number+0x145/0x29b
[ 100.915566] ? vsnprintf+0x341/0x5ff
[ 100.919141] ? desc_read_finalized_seq+0x39/0x87
[ 100.923755] ? update_load_avg+0x1b9/0x607
[ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
[ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c
[ 100.937686] ? dc_fpu_end+0x3d/0xa8
[ 100.941175] dml_get_voltage_level+0x16b/0x180
[ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b
[ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c
[ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc
[ 100.970001] dc_validate_global_state+0x238/0x295
[ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce
[ 100.979235] ? _printk+0x59/0x73
[ 100.982467] drm_atomic_check_only+0x403/0x78b
[ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546
[ 100.991358] ? drm_ioctl+0x1c1/0x3b3
[ 100.994936] ? drm_atomic_set_property+0x92a/0x92a
[ 100.999725] drm_ioctl_kernel+0xdc/0x149
[ 101.003648] drm_ioctl+0x27f/0x3b3
[ 101.007051] ? drm_atomic_set_property+0x92a/0x92a
[ 101.011842] amdgpu_drm_ioctl+0x49/0x7d
[ 101.015679] __se_sys_ioctl+0x7c/0xb8
[ 101.015685] do_syscall_64+0x5f/0xb8
[ 101.015690] ? __irq_exit_rcu+0x34/0x96
[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled.
Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Thu, 31 Mar 2022 12:21:17 +0000 (13:21 +0100)]
drm/amdkfd: Create file descriptor after client is added to smi_clients list
This ensures userspace cannot prematurely clean-up the client before
it is fully initialised which has been proven to cause issues in the
past.
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ma Jun [Wed, 23 Mar 2022 13:16:19 +0000 (21:16 +0800)]
drm/amdgpu: Sync up header and implementation to use the same parameter names
Sync up header and implementation to use the same parameter names
in function amdgpu_ring_init.
ring_size -> max_dw, prio -> hw_prio
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ruili Ji [Thu, 31 Mar 2022 04:19:00 +0000 (12:19 +0800)]
drm/amdgpu: fix incorrect GCR_GENERAL_CNTL address
gfx10.3.3/gfx10.3.6/gfx10.3.7 shall use 0x1580 address for GCR_GENERAL_CNTL
Acked-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Wed, 30 Mar 2022 13:27:41 +0000 (09:27 -0400)]
drm/amdgpu: Fix unique_id references for Sienna Cichlid
Since unique_id is only supported in PMFW 0x3A5300 and higher, we will
only be able to use it inside Smu_Metrics_V3_t, which requires PMFW
0x3A4900 and higher. Remove the unique_id/serial_number references from
the v1 and v2 tables to avoid any confusion, and return 0 if metrics_v1
or metrics_v2 are used to try to get the unique_id/serial_number.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Sat, 26 Mar 2022 20:24:48 +0000 (19:24 -0100)]
drm/amd/display: remove DC_FP_* wrapper from dml folder
FPU documentation states that developers must not use DC_FP_START/END
inside dml files, but use this macro to wrap calls to FPU functions in
dc folder (outside dml folder). Therefore, this patch removes DC_FP_*
wrappers from dml folder and wraps calls for these FPU operations
outside dml, as required.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Sat, 26 Mar 2022 20:24:47 +0000 (19:24 -0100)]
drm/amd/display: detach fpu operations from dcn10_validate_bandwidth in calcs
dcn10_validate_bandwidth is only used on dcn10 files, but is declared in
dcn_calcs files. Rename dcn10_* to dcn_* in calcs, remove DC_FP_* wrapper
inside DML folder and create an specific dcn10_validate_bandwidth in
dcn10_resources that calls dcn_validate_bandwidth and properly wraps that
FPU function with DC_FP_* macro.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Thu, 10 Feb 2022 00:56:46 +0000 (19:56 -0500)]
drm/amdgpu: Add unique_id support for sienna cichlid
This is being added to SMU Metrics, so add the required tie-ins in the
kernel. Also create the corresponding unique_id sysfs file.
v2: Add FW version check, remove SMU mutex
v3: Fix style warning
v4: Add MP1 IP_VERSION check to FW version check
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Tue, 29 Mar 2022 13:46:11 +0000 (09:46 -0400)]
drm/amdgpu: Use metrics data function to get unique_id for Aldebaran
This is abstracted well enough in the get_metrics_data function, so use
the function
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Tue, 29 Mar 2022 13:42:58 +0000 (09:42 -0400)]
drm/amdgpu: Add UNIQUE_ID to MetricsMember_t
This will allow us to use the generic *_get_metrics_data functions for
ASICs that support unique_id
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Fri, 25 Mar 2022 14:11:36 +0000 (10:11 -0400)]
drm/amdgpu: Use switch case for unique_id
To ease readability, use switch to set unique_id as supported for the
supported IP_VERSIONs, and set it to unsupported by default for all
other ASICs.
This makes it easier to add IP_VERSIONs later on, and makes it obvious
that it is not supported by default, instead of the current logic that
assumes that it is supported unless it is not one of the specified
IP_VERSIONs.
v2: Rebase onto previous IP_VERSION change
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <KevinYang.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Sat, 26 Mar 2022 00:17:28 +0000 (20:17 -0400)]
drm/amdkfd: Use atomic64_t type for pdd->tlb_seq
To support multi-thread update page table.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 11 Mar 2022 13:10:13 +0000 (14:10 +0100)]
drm/amdgpu: fix incorrect size printing in error msg
That are bytes not pages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 25 Mar 2022 09:22:36 +0000 (10:22 +0100)]
drm/amdgpu: fix some kerneldoc in the VM code v2
Fix two incorrect kerneldocs for the recent VM code changes.
v2: fix one more typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Fri, 11 Mar 2022 15:00:17 +0000 (20:30 +0530)]
amd/display: set backlight only if required
[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:
"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"
[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Randy Dunlap [Sat, 26 Mar 2022 23:37:26 +0000 (16:37 -0700)]
drm/amd/display: DCN3.1: don't mark as kernel-doc
There is no need for this one static function to be marked as
kernel-doc notation.
Avoid this doc build warning:
warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Enable CRTC
Fixes:
110d3968fe95 ("drm/amd/display: Add DCN3.1 OPTC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Haowen Bai [Thu, 24 Mar 2022 09:46:02 +0000 (17:46 +0800)]
drm/amd/display: Fix pointer dereferenced before checking
The value actual_pix_clk_100Hz is dereferencing pointer pix_clk_params
before pix_clk_params is being null checked. Fix this by assigning
pix_clk_params->requested_pix_clk_100hz to actual_pix_clk_100Hz only if
pix_clk_params is not NULL, otherwise just NULL.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 28 Mar 2022 02:22:44 +0000 (22:22 -0400)]
drm/amdgpu: Add tlb_cb for unlocked update
Flush TLB needs wait for GPU update fence done. MMU notify callback to
unmap range from GPUs uses unlocked GPU page table update, so add tlb_cb
to unlocked update fence to increase vm->tlb_seq.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 28 Mar 2022 02:02:56 +0000 (22:02 -0400)]
drm/amdgpu: Correct unlocked update fence handling
To fix two issues with unlocked update fence:
1. vm->last_unlocked store the latest fence without taking refcount.
2. amdgpu_vm_bo_update_mapping returns old fence, not the latest fence.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Haowen Bai [Thu, 24 Mar 2022 09:27:14 +0000 (17:27 +0800)]
drm/amd/display: Fix pointer dereferenced before checking
The pointer edid_buf is dereferencing pointer edid before edid is being
null checked. Fix this by assigning edid->raw_edid to edid_buf only if
edid is not NULL, otherwise just NULL.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 17 Mar 2022 23:55:05 +0000 (19:55 -0400)]
drm/amd/display: Fix allocate_mst_payload assert on resume
[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()
[How]
Use link type as indicator for mst link.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 20 Mar 2022 18:35:12 +0000 (14:35 -0400)]
drm/amd/display: 3.2.179
- [FW Promotion] Release 0.0.110.0
- Revert FEC check in validation
- Update LTTPR UHBR link rate support struct
- Add support for USBC connector
- Add work around for AUX failure on wake
- Clear optc false state when disable otg
- Enable power gating before init_pipes
- Remove redundant dsc power gating from init_hw
- Power down hardware if timer not trigger
- Correct Slice reset calculation
- Enable 3-plane MPO for DCN31
- Set fec register init value
- Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fix
- Create underflow interrupt IRQ type
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sat, 19 Mar 2022 17:09:57 +0000 (13:09 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.110.0
- Revert save/restore PANEL_PWRSEQ_REF_DIV2 and
other psr phy optimizations
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Fri, 18 Mar 2022 15:12:36 +0000 (11:12 -0400)]
drm/amd/display: Revert FEC check in validation
why and how:
causes failure on install on certain machines
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Thu, 17 Mar 2022 14:17:01 +0000 (10:17 -0400)]
drm/amd/display: Update LTTPR UHBR link rate support struct
[WHY]
Update field order to match DP2.0 spec SCR
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Wed, 16 Mar 2022 05:06:42 +0000 (01:06 -0400)]
drm/amd/display: Add support for USBC connector
[Why]
Add support for CONNECTOR_ID_USBC
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jimmy Kizito [Wed, 9 Mar 2022 23:26:47 +0000 (18:26 -0500)]
drm/amd/display: Add work around for AUX failure on wake.
[Why]
When waking from low-power states, a DP sink may remain unresponsive to
AUX transactions.
[How]
Try to toggle DPCD SET_POWER register repeatedly (up to a maximum
timeout value) until DP sink becomes responsive.
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 15 Mar 2022 20:42:33 +0000 (16:42 -0400)]
drm/amd/display: Clear optc false state when disable otg
[why]
when disable optc, need to clear the underflow status as well.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 15 Mar 2022 20:31:14 +0000 (16:31 -0400)]
drm/amd/display: Enable power gating before init_pipes
[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"
[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 15 Mar 2022 18:57:34 +0000 (14:57 -0400)]
drm/amd/display: Remove redundant dsc power gating from init_hw
[Why]
DSC Power down code has been moved from dcn31_init_hw into init_pipes()
Need to remove it from dcn10_init_hw() as well to avoid duplicated action
on dcn1.x/2.x
[How]
Remove DSC power down code from dcn10_init_hw()
Fixes:
8fa6f4c5715c ("drm/amd/display: fixed the DSC power off sequence during Driver PnP")
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh [Tue, 15 Mar 2022 22:59:46 +0000 (06:59 +0800)]
drm/amd/display: Power down hardware if timer not trigger
[WHY]
In headless systems, if SetMode/Power down timer
is not called, hardware will not be powered down
causing HW/SW discrepancies. Powering down hardware
on SetPowerState to D3 will ensure SW/HW state is accurate.
[HOW]
If PowerDownThread timer is not trigger but OS call
SetPowerState to D3, power down hardware.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Park [Tue, 15 Mar 2022 16:21:43 +0000 (12:21 -0400)]
drm/amd/display: Correct Slice reset calculation
[Why]
Once DSC slice cannot fit pixel clock, we incorrectly
reset min slices to 0 and allow max slice to operate,
even when max slice itself cannot fit the pixel clock
properly.
[How]
Change the sequence such that we correctly determine
DSC is not possible when both min slices and max
slices cannot fit pixel clock per slice.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Krunoslav Kovac [Fri, 11 Mar 2022 21:12:58 +0000 (16:12 -0500)]
drm/amd/display: Enable 3-plane MPO for DCN31
[WHY&HOW]
It can be enabled by users, but proper way is to report max_slave_planes
in DC caps for each ASIC.
Some structures use hardcoded max_plane=2, this is also addressed here.
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jingwen Zhu [Tue, 15 Mar 2022 05:15:27 +0000 (13:15 +0800)]
drm/amd/display: Set fec register init value
[Why]
We don't include this eDP FEC init on fastboot.
[How]
Set the fec to init value when stopping driver &get the fec register value to check should enable FEC.
Co-authored-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oliver Logush [Thu, 10 Mar 2022 16:16:09 +0000 (11:16 -0500)]
drm/amd/display: Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fix
[why]
W/a no longer needed
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Angus Wang [Tue, 8 Mar 2022 14:33:24 +0000 (09:33 -0500)]
drm/amd/display: Create underflow interrupt IRQ type
[WHY]
We want another entry in IRQ type that can be used to
help find the underflow interrupt source.
[HOW]
Added another mapping in IRQ type enum.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Angus Wang <Angus.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohammad Zafar Ziya [Wed, 23 Mar 2022 04:10:00 +0000 (12:10 +0800)]
drm/amdgpu/jpeg: Add jpeg ras error query support
RAS error query support addition for JPEG 2.6
V2: removed unused options and corrected comment format.
Moved register definition to header file.
V3: poison query status check added.
Removed the error query support
V4: Return statement refactored.
Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohammad Zafar Ziya [Wed, 23 Mar 2022 04:06:49 +0000 (12:06 +0800)]
drm/amdgpu/vcn: Add VCN ras error query support
RAS error query support addition for VCN 2.6
V2: removed unused option and corrected comment format
Moved the register definition under header file
V3: poison query status check added.
Removed error query interface
V4: MMSCH poison check option removed, return true/false refactored.
Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohammad Zafar Ziya [Wed, 23 Mar 2022 02:54:15 +0000 (10:54 +0800)]
drm/amdgpu/vcn: Add vcn and jpeg ver 2.6 ras register definition
Adding vcn and jpeg ver 2.6 ras register definition
Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohammad Zafar Ziya [Thu, 17 Mar 2022 01:53:03 +0000 (09:53 +0800)]
drm/amdgpu/jpeg: Add jpeg block ras support
Ras support addition for JPEG block
V2: removed default callback
Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohammad Zafar Ziya [Thu, 17 Mar 2022 01:49:19 +0000 (09:49 +0800)]
drm/amdgpu/vcn: Add vcn ras support
VCN block ras feature support addition
V2: default ras callback removed
Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohammad Zafar Ziya [Thu, 17 Mar 2022 01:45:42 +0000 (09:45 +0800)]
drm/amdgpu: Add vcn and jpeg ras support flag
Add vcn and jpeg ras support options
V2: vcn and jpeg ras flag enabled for aldebaran asic only
V3: vcn and jpeg ras flag disabled for error counter query
Generic poison query interface added
VCN and JPEG ras enabled based on IP version check
V4: vcn and jpeg ras flag moved under ecc flag for dGPU
Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tiancyin [Sun, 27 Mar 2022 11:07:13 +0000 (19:07 +0800)]
drm/amd/vcn: fix an error msg on vcn 3.0
Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.
Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sean Paul [Fri, 25 Mar 2022 00:06:19 +0000 (00:06 +0000)]
drm/amdgpu: Re-classify some log messages in commit path
ATOMIC and DRIVER log categories do not typically contain per-frame log
messages. This patch re-classifies some messages in amd to chattier
categories to keep ATOMIC/DRIVER quiet.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Fri, 25 Mar 2022 07:49:36 +0000 (13:19 +0530)]
drm/amd/pm: Check feature support using IP version
Instead of ASIC type, use GC and MP1 IP versions for feature support checks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Boyuan Zhang [Thu, 24 Mar 2022 16:19:06 +0000 (12:19 -0400)]
drm/amdgpu/vcn3: send smu interface type
For VCN FW to detect ASIC type, in order to use different mailbox registers.
V2: simplify codes and fix format issue.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Darren Powell [Tue, 8 Mar 2022 02:40:35 +0000 (21:40 -0500)]
amdgpu/pm: Implement emit_clk_levels for vega10
(v1)
- implement emit_clk_levels for vega10, based on print_clk_levels,
but using sysfs_emit rather than sprintf
- modify local int vars to use uint32_t to match arg type of
called functions
- add return of error codes
- refactor OD_XXX cases to return early with -EOPNOTSUPP if
!(hwmgr->od_enabled)
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Darren Powell [Sat, 5 Mar 2022 04:45:25 +0000 (23:45 -0500)]
amdgpu/pm: Add new hwmgr API function "emit_clock_levels"
Extend commit
7f36948c92b2 ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset")
Add new hwmgr API function "emit_clock_levels"
- add member emit_clock_levels to pp_hwmgr_func
- Implemented pp_dpm_emit_clock_levels
- add pp_dpm_emit_clock_levels to pp_dpm_funcs
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 17 Mar 2022 13:29:22 +0000 (14:29 +0100)]
drm/amdgpu: remove table_freed param from the VM code
Better to leave the decision when to flush the VM changes in the TLB to
the VM code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 17 Mar 2022 13:08:36 +0000 (14:08 +0100)]
drm/amdkfd: use tlb_seq from the VM subsystem for SVM as well v2
Instead of hand rolling the table_freed parameter.
v2: add some changes suggested by Philip
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 17 Mar 2022 08:53:55 +0000 (09:53 +0100)]
drm/amdkfd: start using tlb_seq from the VM subsystem
Instead of trying to figure out if a TLB flush is necessary or not use
the information provided by the VM subsystem now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 15 Mar 2022 14:27:45 +0000 (15:27 +0100)]
drm/amdgpu: rework TLB flushing
Instead of tracking the VM updates through the dependencies just use a
sequence counter for page table updates which indicates the need to
flush the TLB.
This reduces the need to flush the TLB drastically.
v2: squash in NULL check fix (Christian)
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 8 Mar 2022 14:06:49 +0000 (15:06 +0100)]
drm/amdgpu: simplify VM update tracking a bit
Store the 64bit sequence directly. Makes it simpler to use and saves a bit
of fence reference counting overhead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 15 Mar 2022 07:51:24 +0000 (08:51 +0100)]
drm/amdgpu: separate VM PT handling into amdgpu_vm_pt.c
Separate the VM page table backend operations from the state machine since
the amdgpu_vm.c file is becoming to complex.
The allocating, freeing and updating page tables and page directories can
easily be moved into a separate file.
While at it cleanup everything checkpatch.pl reported and rename the
functions a bit to make more clear that they belong together.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 14 Mar 2022 12:11:28 +0000 (13:11 +0100)]
drm/amdgpu: move VM PDEs to idle after update
Move the page tables to the idle list after updating the PDEs.
We have gone back and forth with that a couple of times because of problems
with the inter PD dependencies, but it should work now that we have the
state handling cleanly separated.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Mon, 7 Mar 2022 15:48:01 +0000 (14:48 -0100)]
drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder
Moves FPU-related structs and dcn316_update_bw_bounding_box from dcn316
driver to dml/dcn31 that centralize FPU operations for DCN 3.1x
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Mon, 7 Mar 2022 15:48:00 +0000 (14:48 -0100)]
drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder
Moves related structs and dcn315_update_bw_bounding_box from dcn315
driver code to dml/dcn31_fpu that centralizes FPU code for DCN 3.1x.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Mon, 7 Mar 2022 15:47:59 +0000 (14:47 -0100)]
drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder
Creates FPU files in dml/dcn31 folder to centralize FPU operations
from 3.1x drivers and moves all FPU-associated code from dcn31 driver
to there. It includes the struct _vcs_dpi_ip_params_st and
_vcs_dpi_soc_bounding_box_st and functions:
- dcn31_calculate_wm_and_dlg_fp()
- dcn31_update_bw_bounding_box()
adding dc_assert_fp_enabled to them and drop DC_FP_START/END inside
functions that was moved to dml folder, as required.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 14 Mar 2022 01:04:59 +0000 (21:04 -0400)]
drm/amd/display: 3.2.178
This version brings along following fixes:
- HDCP SEND AKI INIT error
- fix audio format not updated after edid updated
- Reduce stack size
- FEC check in timing validation
- Add fSMC_MSG_SetDtbClk support
- Update VTEM Infopacket definition
- [FW Promotion] Release 0.0.109.0
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sun, 13 Mar 2022 18:06:05 +0000 (14:06 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.109.0
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Mon, 21 Mar 2022 07:45:31 +0000 (15:45 +0800)]
drm/amdkfd: print unmap queue status for RAS poison consumption (v3)
Print the status out when it passes, and also tell user gpu reset
is triggered when we fall back to legacy way.
v2: make the message more explicit.
v3: change succeeds to succeeded.
replace pr_warn with dev_warn.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ahmad Othman [Fri, 4 Mar 2022 16:56:19 +0000 (11:56 -0500)]
drm/amd/display: Fix HDCP SEND AKI INIT error
[why]
HDCP sends AKI INIT error in case of multiple display on dock
[how]
Add new checks and method to handle display adjustment
for multiple display cases
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ahmad Othman <ahmad.othman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Wed, 16 Mar 2022 06:51:31 +0000 (14:51 +0800)]
drm/amdgpu: drop redundant check of harvest info
Harvest bit setting in IP data structure promises this,
so no need to set it explicitly.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Tue, 15 Mar 2022 20:19:59 +0000 (20:19 +0000)]
drm/amdgpu: Fix spelling mistake "regiser" -> "register"
There is a spelling mistake in a dev_error error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Wed, 16 Mar 2022 06:38:12 +0000 (14:38 +0800)]
drm/amdkfd: add RAS poison consumption handling for UTCL2 (v2)
Do RAS page retirement and use gpu reset as fallback in UTCL2 fault
handler.
v2: replace vm fault event with posion consumed event in UTCL2
poison consumption.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Tue, 15 Mar 2022 09:48:18 +0000 (17:48 +0800)]
drm/amdgpu: add UTCL2 RAS poison query for Aldebaran (v2)
Add help functions to query and reset RAS UTCL2 poison status.
v2: implement it on amdgpu side and kfd only calls it.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Wed, 16 Mar 2022 04:03:51 +0000 (12:03 +0800)]
drm/amdkfd: replace source_id with client_id for RAS poison consumption
Client ID is more accruate here and we can deal with more different
cases with client ID.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Tue, 15 Mar 2022 09:07:21 +0000 (17:07 +0800)]
drm/amdkfd: refine event_interrupt_poison_consumption
Combine reading and setting poison flag as one atomic operation
and add print message for the function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 14 Mar 2022 18:42:03 +0000 (14:42 -0400)]
drm/amdgpu: make amdgpu_display_gem_fb_verify_and_init() static
Unused outside of amdgpu_display.c.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 14 Mar 2022 18:40:33 +0000 (14:40 -0400)]
drm/amdgpu: drop amdgpu_display_gem_fb_init()
Unused.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 14 Mar 2022 18:38:19 +0000 (14:38 -0400)]
drm/amdgpu: make amdgpu_display_framebuffer_init() static
It's not used outside of amdgpu_display.c.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Thu, 24 Mar 2022 08:14:16 +0000 (16:14 +0800)]
drm/amdgpu/gfx10: enable gfx1037 clock counter retrieval function
Enable gfx1037 clock counter retrieval function for KFDPerfCountersTest.ClockCountersBasicTest.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Tue, 22 Mar 2022 08:25:29 +0000 (16:25 +0800)]
drm/amdgpu: set noretry for gfx 10.3.7
Disable xnack on the gfx10.3.7 for the KFD test.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 2 Mar 2022 20:18:18 +0000 (15:18 -0500)]
drm/amdgpu: set noretry=1 for GFX 10.3.4
Retry faults are not supported on GFX 10.3.4.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Tue, 1 Mar 2022 14:31:40 +0000 (22:31 +0800)]
drm/amdgpu: set noretry=1 for gc 10.3.6
this patch to set noretry=1 for gc 10.3.6.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>