Yangbo Lu [Fri, 21 Jun 2019 03:42:26 +0000 (11:42 +0800)]
Move CONFIG_FSL_ESDHC to defconfig
Moved CONFIG_FSL_ESDHC from header files to defconfig files.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
Tom Rini [Fri, 21 Jun 2019 18:12:28 +0000 (14:12 -0400)]
Merge tag 'efi-2019-07-rc5-3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for v2019.07-rc5 (3)
This pull request provides error fixes for the graphical output protocol,
the text output protocol, and the extended text input protocol.
Setting the boot device for the bootefi command is now not only supported
by the 'load' command but also for the file system specific commands like
'fatload'.
Tom Rini [Fri, 21 Jun 2019 18:11:11 +0000 (14:11 -0400)]
Merge branch '2019-06-21-master-imports'
- Assorted small fixes
- Bugfix RSA handling code to reject images with unknown padding.
- Some boards disabled unused features to turn off DM warnings.
Tom Rini [Fri, 21 Jun 2019 14:11:23 +0000 (10:11 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Felix Brack [Tue, 11 Jun 2019 08:39:52 +0000 (10:39 +0200)]
arm: am335x-pdu001: Remove watchdog support
This board does not require watchdog support.
Signed-off-by: Felix Brack <fb@ltec.ch>
Peng Fan [Thu, 6 Jun 2019 07:59:16 +0000 (07:59 +0000)]
lib: Makefile: build fdtdec_common.c when OF_LIBFDT selected
When build SPL_OF_PLATDATA on i.MX6, meet issue the fdtdec_get_int
not defined, however fdtdec.c will use fdtdec_get_int, so let's
compile fdtdec_common.c when OF_LIBFDT selected.
Since there is also SPL_OF_LIBFDT, so need to use
CONFIG_$(SPL_TPL_)OF_LIBFDT.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Bin Meng [Wed, 5 Jun 2019 14:26:44 +0000 (07:26 -0700)]
pci: Avoid assigning PCI resources that are below 0x1000
commit
b7598a43f2b4 ("[PATCH] Avoid assigning PCI resources from
zero address") only moved the bus lower address to 0x1000 if the
given bus start address is zero. The comment said 0x1000 is a
reasonable starting value, hence we'd better apply the same
adjustment when the given bus start address is below 0x1000.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Joshua Watt [Thu, 20 Jun 2019 21:31:35 +0000 (16:31 -0500)]
config_distro_bootcmd: Init IDE devices
IDE devices are no longer automatically probed by u-boot, so it should
be done by the distro boot command before attempting to boot from IDE
(just like scsi and nvme)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Michal Simek [Thu, 20 Jun 2019 06:02:46 +0000 (08:02 +0200)]
arm64: zynqmp: Cover ultra96 dts file by MAINTAINERS fragment
Avnet Ultra96 dts file should be also cover by MAINTAINERS fragment.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Prabhakar Kushwaha [Wed, 19 Jun 2019 12:17:12 +0000 (17:47 +0530)]
travis.yml: Add buildman support for NXP's LS1028 & LX2160
NXP's LS1028 and LX2160 platform build support added via buildman
in travis.yml.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Robert Hancock [Tue, 18 Jun 2019 15:53:04 +0000 (09:53 -0600)]
disk: part: Don't skip partition init
blk_get_device_by_str was skipping part_init when hw partition 0 was
selected because it is the default. However, this caused issues when
switching to a non-zero partition and then back to partition zero, as
stale data from the wrong partition was returned.
Remove this optimization and call part_init regardless of the selected
partition.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Moses Christopher [Tue, 18 Jun 2019 13:54:02 +0000 (13:54 +0000)]
am335x, guardian: update the maintainer list
Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
Masahiro Yamada [Tue, 18 Jun 2019 03:25:51 +0000 (12:25 +0900)]
vexpress64: fix a typo of SPDX-License-Identifier
Misspelling of SPDX-License-Identifier is rather fatal than other
general typos, so must be fixed.
This file spells SPDX-Licence-Identifier.
^
I also moved it to the very top of the file with // comment style.
Detected by grepping the source tree:
$ git grep --not -e SPDX-License-Identifier --and -e SPDX-
board/armltd/vexpress64/pcie.c: * SPDX-Licence-Identifier: GPL-2.0+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Oleksandr Zhadan [Mon, 17 Jun 2019 20:10:23 +0000 (16:10 -0400)]
board: Arcturus: DM: Disable drivers without DM support.
Extra "not DM" controllers support is disabled.
u-boot BSP still good enough to upgrade and run images.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Anatolij Gustschin [Mon, 17 Jun 2019 13:33:55 +0000 (15:33 +0200)]
cmd/led.c: fix typos in online help
Remove square brackets around label in state command description.
Fixes:
ea41b15617fa ("cmd/led: check subcommand "list" instead "l"")
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Patrick Doyle [Fri, 14 Jun 2019 17:43:38 +0000 (13:43 -0400)]
rsa: reject images with unknown padding
Previously we would store NULL in info->padding and jump to an illegal
instruction if an unknown value for "padding" was specified in the
device tree.
Signed-off-by: Patrick Doyle <pdoyle@irobot.com>
Tom Rini [Fri, 21 Jun 2019 01:52:31 +0000 (21:52 -0400)]
Merge branch '2019-06-20-master-imports'
- Assorted minor fixes
Heinrich Schuchardt [Thu, 20 Jun 2019 10:03:53 +0000 (12:03 +0200)]
efi_loader: fix typo in efi_variable.c
%s/efi_efi_/efi_/
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Thu, 20 Jun 2019 10:59:45 +0000 (12:59 +0200)]
efi_loader: consistent error handling in efidebug.c
If a variable cannot be set, always show an information message.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Thu, 20 Jun 2019 10:48:04 +0000 (12:48 +0200)]
efi_loader: consistent types in efidebug.c
efi_status_t and int are of different size. Use separate variables for
return codes of different type.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Mian Yousaf Kaukab [Tue, 18 Jun 2019 13:03:44 +0000 (15:03 +0200)]
fs: do_load: pass device path for efi payload
fatload command can be used to load the EFI payload since EFI system
partition is always a FAT partition. Call into EFI code from do_load()
to set the device path from which the last binary was loaded. An EFI
application like grub2 can’t find its configuration file without the
device path set.
Since device path is now set in do_load() there is no need to set it
in do_load_wrapper() for the load command.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Mon, 17 Jun 2019 20:00:13 +0000 (22:00 +0200)]
efi_loader: Delete() return EFI_WARN_DELETE_FAILURE
If EFI_FILE_PROTOCOL.Delete() fails, always close the handle and return
EFI_WARN_DELETE_FAILURE.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Mon, 17 Jun 2019 18:46:29 +0000 (20:46 +0200)]
efi_loader: ListPackageLists() return EFI_NOT_FOUND
If no matching package list is found in ListPackageLists(), return
EFI_NOT_FOUND.
If we do not support a package type, we will not find a matching package
list. Remove the unreachable EFI_PRINTF() statements.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 16 Jun 2019 20:33:20 +0000 (22:33 +0200)]
efi_loader: console incorrectly advertised left logo key
Avoid to signal that the left logo key is pressed, when it is not.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sun, 16 Jun 2019 19:41:13 +0000 (21:41 +0200)]
efi_loader: alternative scan codes for F5, END, HOME
Depending on the key board alternative scan codes are used for F5, END, and
HOME.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 12:52:53 +0000 (14:52 +0200)]
efi_loader: GOP: provide accurate mode information
For 5:6:5 modes provide correct frame buffer information.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 12:52:53 +0000 (14:52 +0200)]
efi_loader: SetMode() must blank screen
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() must blank the screen.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 12:51:06 +0000 (14:51 +0200)]
efi_loader: system table setup
When setting up the system table avoid superfluous void * conversions.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 12:47:25 +0000 (14:47 +0200)]
efi_loader: EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL definition
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.Reset() is a function and not a void *
pointer.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 12:07:40 +0000 (14:07 +0200)]
efi_loader: QueryMode() must allocate buffer
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() must allocate a buffer for the
mode information structure.
Adjust the unit test to free the buffer.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 10:58:30 +0000 (12:58 +0200)]
efi_loader: SetMode() parameters check
If EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() is called with an invalid mode,
return EFI_UNSUPPORTED.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 10:52:35 +0000 (12:52 +0200)]
efi_loader: QueryMode() check parameters
Check the parameters of EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 15 Jun 2019 10:42:46 +0000 (12:42 +0200)]
efi_loader: Blt() with incorrect BltOperation
If EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() is called with an invalid value of
BltOperation return EFI_INVALID_PARAMETER.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Shannon Barber [Fri, 7 Jun 2019 20:48:19 +0000 (20:48 +0000)]
Fix watchdog timeout setup for mt7623
Signed-off-by: Shannon Barber <sbarber@dataspeedinc.com>
Alex Kiernan [Wed, 12 Jun 2019 14:27:55 +0000 (15:27 +0100)]
fw_env: Add missing write failure check
If flash_write fails, whilst we propagate this up to our caller, we need
to avoid swapping in the new file (if we're on a filesystem) in this
case.
Fixes:
dbc34323796b ("tools: env: Implement atomic replace for filesystem")
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Breno Matheus Lima [Wed, 5 Jun 2019 18:18:30 +0000 (18:18 +0000)]
doc: Remove duplicated documentation directory
Commit
ad7061ed742e ("doc: Move device tree bindings documentation to
doc/device-tree-bindings") moved all device tree binding documentation
to doc/device-tree-bindings directory.
The current U-Boot project still have two documentation directories:
- doc/
- Documentation/
Move all documentation and sphinx files to doc directory so all content
can be in a common place.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Joel Stanley [Thu, 6 Jun 2019 07:38:45 +0000 (17:08 +0930)]
aspeed/watchdog: Correct timeout value
The driver was using milliseconds and programming it into a register
which takes ticks of the watchdog clock, which runs at 1MHz. This meant
we were off by 1000 with the desired value.
When
06985289d452 ("watchdog: Implement generic watchdog_reset()
version") was added the aspeed board would leave the watchdog running,
causing it to bite before u-boot was done.
Discovered by booting in qemu:
$ qemu-system-arm -M ast2500-evb -drive file=test.img,format=raw,if=mtd -nographic -no-reboot -d cpu_reset
U-Boot 2019.07-rc3-00091-g2253e40caef5 (Jun 06 2019 - 16:53:23 +0930)
Model: Aspeed BMC
DRAM: 496 MiB
WDT: Started with servicing (60s timeout)
MMC:
In: serial@
1e784000
Out: serial@
1e784000
Err: serial@
1e784000
Watchdog timer expired.
Fixes:
06985289d452 ("watchdog: Implement generic watchdog_reset() version")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Mian Yousaf Kaukab [Thu, 13 Jun 2019 12:46:44 +0000 (14:46 +0200)]
armv8: fix typo in LINUX_KERNEL_IMAGE_HEADER check
Fixes:
8163faf952 ARMv8: add optional Linux kernel image header
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Bin Meng [Wed, 19 Jun 2019 03:40:54 +0000 (20:40 -0700)]
MAINTAINERS: Update git repo links
Update all git repo links with the new gitlab ones.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Marek Vasut [Thu, 16 May 2019 20:16:54 +0000 (22:16 +0200)]
sh: Add myself as SH maintainer
Add myself as an SH maintainer.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 20 Jun 2019 13:14:35 +0000 (09:14 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- PCIe driver change to support DM model
- T2080QDS migrated to use PCIe DM model
Tom Rini [Thu, 20 Jun 2019 13:14:03 +0000 (09:14 -0400)]
Merge tag 'u-boot-stm32-
20190619' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm
- Update STM32MP entry in MAINTAINERS
- Handle correctly binding for g-tx-fifo-size for USB DWC2 driver
- Fix trusted STM32MP1 defconfig with correct ethernet driver
Tom Rini [Thu, 20 Jun 2019 13:13:27 +0000 (09:13 -0400)]
Merge tag 'mmc-6-19' of https://github.com/MrVan/u-boot
- Avoid HS400 mode when accessing boot partitions
Hou Zhiqiang [Sat, 27 Apr 2019 16:55:22 +0000 (00:55 +0800)]
configs: T2080QDS: Enable PCIe driver
Enable the DM PCIe driver in T2080QDS defconfig.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Hou Zhiqiang [Thu, 20 Jun 2019 03:20:47 +0000 (11:20 +0800)]
powerpc: T208xQDS: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Hou Zhiqiang [Wed, 24 Apr 2019 14:33:02 +0000 (22:33 +0800)]
dm: pci: add Freescale PowerPC PCIe driver
Add PCIe DM driver for Freescale PowerPC PCIe controllers.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Hou Zhiqiang [Wed, 24 Apr 2019 15:41:07 +0000 (23:41 +0800)]
t2080: dts: Added PCIe DT nodes
T2080 integrated 4 PCIe controllers, which is compatible with
the PCI Express™ Base Specification, Revision 3.0, and this
patch is to add DT node for each PCIe controller.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Hou Zhiqiang [Mon, 22 Apr 2019 13:58:13 +0000 (21:58 +0800)]
powerpc: T208xQDS: Compile the legacy PCIe routines conditionally
Compile the legacy PCIe initialization reoutines only when DM_PCI
is not enabled.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Hou Zhiqiang [Mon, 22 Apr 2019 13:50:34 +0000 (21:50 +0800)]
powerpc: mpc85xx: Update the condition to compile PCI routines
Compile the routines of mpc85xx/pci.c when both FSL_PCI_INIT
and DM_PCI are not enabled.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Hou Zhiqiang [Thu, 23 May 2019 03:52:44 +0000 (11:52 +0800)]
powerpc: mpc85xx: Move CONFIG_FSL_PCIE_RESET to Kconfig
Use the Kconfig option to select the PCIe reset errata.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Hou Zhiqiang [Wed, 22 May 2019 14:46:03 +0000 (22:46 +0800)]
powerpc: mpc85xx: Move CONFIG_FSL_PCIE_DISABLE_ASPM to Kconfig
Use the Kconfig option to select the PCIe ASPM errata.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Tom Rini [Wed, 19 Jun 2019 18:01:11 +0000 (14:01 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- LS1046AFRWY support
- USB errata fix and secure boot defconfig support for LS1028A
- Enabled SDHC and SATA for LX2160
- LS1046A serdes fixes
- other minor fixes
Patrick Delaunay [Tue, 18 Jun 2019 14:57:18 +0000 (16:57 +0200)]
usb: dwc2: allow peripheral mode for OTG configuration
Allow device mode in DWC2 driver when device tree select the dr_mode
"peripheral" or "otg".
The device mode is not allowed when dr_mode = "host" in device tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Patrick Delaunay [Tue, 18 Jun 2019 14:57:17 +0000 (16:57 +0200)]
ARM: dts: stm32mp1: remove override for g-tx-fifo-size
Remove the override for usbotg_hs on g-tx-fifo-size as the correct
binding, used in the kernel device tree, is now supported in dwc2
device driver.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Tue, 18 Jun 2019 14:57:16 +0000 (16:57 +0200)]
usb: dwc2: correctly handle binding for g-tx-fifo-size
Manage g-tx-fifo-size as a array as specify in the binding.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Udit Agarwal [Tue, 11 Jun 2019 09:37:49 +0000 (09:37 +0000)]
board/freescale/common: secure_boot: Set bootdelay to -2.
Uboot prompt must not be available while running
secure boot. TO ensure this bootdelay must be set
to -2.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Vabhav Sharma [Thu, 6 Jun 2019 12:35:28 +0000 (12:35 +0000)]
armv8: ls1046afrwy: Add support for LS1046AFRWY platform
LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Wasim Khan [Mon, 10 Jun 2019 10:17:29 +0000 (10:17 +0000)]
armv8: ls2088ardb: Fix MC firmware loading during SD boot
During SD boot, MC firmware and DPC are copied from SD card to DDR.
Size reserved between MC and DPC firmware on DDR is 1MB.
If the size of MC firmware(load address 0x80000000) is more than 1 MB
then part of MC firmware will be overwritten by DPC firmware (load
address 0x80100000).
Fix: Update the MC/DPL/DPC firmware's DDR address as per their
respective addresses in SD card.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Wasim Khan [Mon, 10 Jun 2019 10:17:27 +0000 (10:17 +0000)]
armv8: ls2088aqds: Fix MC firmware loading during SD boot
During SD boot, MC firmware and DPC are copied from SD card to DDR.
Size reserved between MC and DPC firmware on DDR is 1MB.
If the size of MC firmware(load address 0x80000000) is more than 1 MB
then part of MC firmware will be overwritten by DPC firmware (load
address 0x80100000).
Fix: Update the MC/DPL/DPC firmware's DDR address as per their
respective addresses in SD card.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Wasim Khan [Mon, 10 Jun 2019 10:17:25 +0000 (10:17 +0000)]
armv8: ls2088aqds: Add bootcmd for TFA boot
Add bootcmd for IFC NOR boot and SD boot.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Alex Marginean [Fri, 7 Jun 2019 14:03:07 +0000 (17:03 +0300)]
arm: ls1028a: define the integrated PCI bus (ECAM)
LS1028A includes an integrated PCI bus with 11 PCI functions residing on
bus 0. ECAM plus the device register space takes up 256MB of address
space.
Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Yinbo Zhu [Mon, 3 Jun 2019 11:24:23 +0000 (19:24 +0800)]
armv8: fsl-lsch2: add clock support for the second eSDHC
Layerscape began to use two eSDHC controllers, for example,
LS1012A. They are same IP block with same reference clock.
This patch is to add clock support for the second eSDHC.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Maciej Pijanowski [Fri, 31 May 2019 20:30:58 +0000 (22:30 +0200)]
configs/ls1046ardb_*: disable CONFIG_SPI_FLASH_USE_4K_SECTORS
With this setting enabled, the on-board QSPI cannot be
properly flashed. There are no error messages, but the simple
write / read / compare tests fail.
This is already disabled in the qspi and tfa defconfigs for the
LS1046ARDB platform.
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Cc: piotr.krol@3mdeb.com
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Maciej Pijanowski [Fri, 31 May 2019 14:11:35 +0000 (16:11 +0200)]
arm: fsl-layerscape: add 0x3040 serdes1 settings for LS1046A
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Cc: piotr.krol@3mdeb.com
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Maciej Pijanowski [Fri, 31 May 2019 14:00:26 +0000 (16:00 +0200)]
arm: fsl-layerscape: fix 0x3363 serdes1 settings for ls1046a
As per LS1046A hardware manual, SGMII.9 and SGMII.10 present on
lane D and lane C respectively for 0x3363 protocol.
So fix serdes1 settings for ls1046a.
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Ashish Kumar [Fri, 31 May 2019 10:33:28 +0000 (16:03 +0530)]
configs: Unset CONFIG_SPI_FLASH_BAR, move CONFIG_FSL_QSPI to defconfig
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Alex Marginean [Thu, 30 May 2019 16:28:31 +0000 (19:28 +0300)]
armv8: fsl-layerscape: fix config dependency for layerscape pci code
Fixes a link error on layerscape platform, linking fails with CONFIG_PCI
set and CONFIG_PCI_LAYERSCAPE unset.
Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Pankit Garg [Thu, 30 May 2019 12:04:15 +0000 (12:04 +0000)]
armv8: fsl-layerscape: Change bootcmd update logic
Change bootcmd update logic when CONFIG_ENV_ADDR is not defined
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Pankit Garg [Thu, 30 May 2019 12:04:14 +0000 (12:04 +0000)]
ls1046ardb: Add CONFIG_ENV_ADDR to init env in qspi boot
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Pankit Garg [Wed, 29 May 2019 12:12:36 +0000 (12:12 +0000)]
armv8: fsl-layerscape: Update qspi clk cfg
Update qspi clock configuration in TFABOOT in case
of all boot sources except qspi boot source.
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Peng Ma [Wed, 29 May 2019 02:40:47 +0000 (02:40 +0000)]
ARM: dts: ls1021a: Fixed reg for sata node
This patch is to fixed the reg read to "0" for armv7
architecture.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Meenakshi Aggarwal [Tue, 28 May 2019 16:07:58 +0000 (21:37 +0530)]
armv8/fsl-layerscape: Add loop to check L3 dcache status
Flushing L3 cache may need variable time depending upon cache line
allocation.
Coming up with a proper timeout value would be best handled by
simulations under multiple scenarios in your actual system.
>From the purely HN-F point of view, the flush would take ~15 cycles for
a clean line, and ~22 cycles for a dirty line. For the dirty line case,
there are many variables outside the HN-F that will increase the
duration per line. For example, a *DBIDResp from the SN-F/SBSX,
memory controller latency, SN-F/SBSX RetryAck responses, CCN ring
congestion, CCN ring hops, etc, etc. The worst-case timeout would
have to factor in all of these variables plus the HN-F cycles for
every line in the L3, and assuming all lines are dirty
In case if L3 is not flushed properly, system behaviour will be
erratic, so remove timeout and add loop to check status of L3 cache.
System will stuck in while loop if there is some issue in L3 cache
flushing.
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Yinbo Zhu [Mon, 27 May 2019 04:17:18 +0000 (12:17 +0800)]
armv8: lx2160aqds: Enable eSDHC controllers
This patch is to enable esdhc controllers for lx2160aqds
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Yuantian Tang [Fri, 24 May 2019 06:36:27 +0000 (14:36 +0800)]
armv8: ls1028a: Add secure boot defconfig
Add secure boot defconfig for ls1028aqds and ls1028ardb boards.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Mian Yousaf Kaukab [Thu, 23 May 2019 08:57:34 +0000 (10:57 +0200)]
board: lx2160a: use default scan_dev_for_boot
Default environment variable is more complete. Also scans for efi
binaries for example.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Mian Yousaf Kaukab [Thu, 23 May 2019 08:57:33 +0000 (10:57 +0200)]
board: lx2160a: fix fsl-mc status in fdt with bootefi
fsl-mc lazyapply command applies dpl from efi_exit_boot_services().
Status of fsl-mc node in working fdt is updated at this stage.
However, an efi application like grub may already have copied the fdt.
So the updates to fdt done at efi_exit_boot_services() may not be
visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply
command is used.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Peng Ma [Thu, 23 May 2019 04:06:48 +0000 (04:06 +0000)]
armv8: ls1028a: Add ecc address node for sata.
Move the ecc addr from driver to dts
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Yangbo Lu [Thu, 23 May 2019 03:05:46 +0000 (11:05 +0800)]
mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
u-boot is trying to make CONFIG_BLK as a hard requirement
for DM_MMC. But now it's still not.
config BLK
bool "Support block devices"
depends on DM
default y if DM_MMC
When fsl_esdhc driver was reworked for DM_MMC support, DM_MMC
without CONFIG_BLK enabled wasn't considered. This patch is to
fix probe issue without CONFIG_BLK enabled.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Yangbo Lu [Thu, 23 May 2019 03:05:45 +0000 (11:05 +0800)]
armv8: fsl-lsch3: add clock support for the second eSDHC
Layerscape began to use two eSDHC controllers, for example,
LS1028A. They are same IP block with same reference clock.
This patch is to add clock support for the second eSDHC.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Peng Ma [Wed, 22 May 2019 02:43:22 +0000 (02:43 +0000)]
armv8: lx2160aqds: Enable sata
Change sata node status to enable sata.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Xiaowei Bao [Tue, 21 May 2019 10:28:31 +0000 (18:28 +0800)]
armv8: ls1028a: Add other serdes protocal support
Add other serdes protocal support.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Yinbo Zhu [Tue, 14 May 2019 09:34:57 +0000 (17:34 +0800)]
armv8: ls1028a: enable workaround for USB errarum A-009007
Rx Compliance tests may fail intermittently at high jitter
frequencies using default register values.
So program register USB_PHY_RX_OVRD_IN_HI in certain sequence
to make the Rx compliance test pass.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Ran Wang [Tue, 14 May 2019 09:34:56 +0000 (17:34 +0800)]
armv8: ls1028a: enable workaround for USB erratum A-008997
Enable workaround for USB erratum A-008997. Here PCSTXSWINGFULL
registers has been moved to DSCR as compared to other Layerscape SoCs
where it was in SCFG.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Pankaj Bansal [Mon, 22 Apr 2019 06:31:42 +0000 (06:31 +0000)]
board/fsl/layerscape: Modify the aliases names
when compiling dts file using DTC_FLAG='-@', the device tree compiler
reports these warnings:
Warning (alias_paths): /aliases: aliases property name must include
only lowercase and '-'
Fixed the node aliases to silence these warnings.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Marek Vasut [Fri, 31 May 2019 13:22:44 +0000 (15:22 +0200)]
mmc: Avoid HS400 mode when accessing boot partitions
U-Boot code currently only applies this restriction to HS200 mode,
extend this to HS400 mode as well.
Currently U-Boot code not support accessing boot partition in HS200/400
mode. This needs more check.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Patrice Chotard [Tue, 18 Jun 2019 08:52:07 +0000 (10:52 +0200)]
MAINTAINERS: Remove Christophe Kerello from STM32MP entry
Christophe will not have maintainer activities, so remove its name.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Christophe Kerello <christophe.kerello@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Patrice Chotard [Tue, 11 Jun 2019 13:40:41 +0000 (15:40 +0200)]
configs: stm32mp15: Select correct Ethernet driver for trusted mode
Select the correct Ethernet driver from Synopsis.
Initially, "Synopsys Designware Ethernet MAC" driver was wrongly
selected instead of "Synopsys DWC Ethernet QOS device" driver.
Fixes: commit
f90b3f5b68ed ("configs: stm32mp15: Enable Ethernet feature")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Tom Rini [Mon, 17 Jun 2019 15:32:22 +0000 (11:32 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-spi
- Drop zipitz2 board (Tom)
- Add DEPRECATED option (Tom)
- Mark legacy or non-dm drivers as DEPRECATED (Jagan)
Tom Rini [Mon, 17 Jun 2019 15:27:21 +0000 (11:27 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
- Assorted gadget fixes
Tom Rini [Sat, 15 Jun 2019 17:03:00 +0000 (13:03 -0400)]
Merge tag 'efi-2019-07-rc5-2' of git://git.denx.de/u-boot-efi
Pull request for UEFI sub-system for v2019.07-rc5 (2)
This pull request provides bug fixes for the UEFI sub-system. The most
relevant one concerns the allocation of memory at address 0. It is
needed for booting Linux on several boards via bootefi, e.g. the Asus
TinkerBoard.
An undefined reference bug in disk/part.c related to a division is
resolved.
Tom Rini [Sat, 15 Jun 2019 17:02:26 +0000 (13:02 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- SPL size check for Gen5, i2c enablement for S10
Tom Rini [Sat, 15 Jun 2019 17:02:12 +0000 (13:02 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
- More board removal
Tom Rini [Sat, 15 Jun 2019 16:58:06 +0000 (12:58 -0400)]
Merge branch '2019-06-14-master-imports'
- Kconfig migrations of SPL_BOOT_xxx, SYS_LDSCRIPT, IP_DEFRAG,
TFTP_BLOCKSIZE.
- Typo fixes, other minor corrections.
Bartosz Golaszewski [Mon, 20 May 2019 08:22:14 +0000 (10:22 +0200)]
cmd: define CMD_DATA_SIZE when CONFIG_CMD_SETEXPR is selected
The setexpr shell command calls cmd_get_data_size() which is only built
when CMD_DATA_SIZE is defined. We need to define CMD_DATA_SIZE if
CONFIG_CMD_SETEXPR is selected or the build will fail if no other
command selecting this option is enabled.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tom Rini [Sun, 2 Jun 2019 12:57:32 +0000 (08:57 -0400)]
configs: Migrate CONFIG_SYS_LDSCRIPT to Kconfig
In order to migrate this symbol to Kconfig introduce a new symbol to
guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then
provide the exact final location o the script.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 2 Jun 2019 12:57:31 +0000 (08:57 -0400)]
configs: Remove unneeded CONFIG_SYS_LDSCRIPT instances
A number of boards set CONFIG_SYS_LDSCRIPT and then end up using one of
the default searched LDSCRIPT paths. Remove these customizations.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 1 Jun 2019 18:20:25 +0000 (14:20 -0400)]
configs: Migrate the various SPL_BOOT_xxx choices for PowerPC
The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a
choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and
CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
Andy Shevchenko [Wed, 12 Jun 2019 12:35:24 +0000 (15:35 +0300)]
common: Fix a typo abnove -> above
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Simon Goldschmidt [Tue, 11 Jun 2019 20:18:51 +0000 (22:18 +0200)]
tools: add tools/spl_size_limit to ignore list
This tool has just been added but it seems I forgot to add it to
the ignore list. So to prevent the built binary being marked as
unversioned, add it to the ignore list.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Marek Vasut [Tue, 11 Jun 2019 02:51:15 +0000 (04:51 +0200)]
net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig
Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs,
headers and whitelist.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>