drm/vmwgfx: Fix stale file descriptors on failed usercopy

commit a0f90c8815706981c483a652a6aefca51a5e191c upstream.

A failing usercopy of the fence_rep object will lead to a stale entry in
the file descriptor table as put_unused_fd() won't release it. This
enables userland to refer to a dangling 'file' object through that still
valid file descriptor, leading to all kinds of use-after-free
exploitation scenarios.

Fix this by deferring the call to fd_install() until after the usercopy
has succeeded.

Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/bpf: Remove 128MB limit for BPF JIT programs

commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.

Commit 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module
memory") restricts BPF JIT program allocation to a 128MB region to ensure
BPF programs are still in branching range of each other. However this
restriction should not apply to the aarch64 JIT, since BPF_JMP | BPF_CALL
are implemented as a 64-bit move into a register and then a BLR instruction -
which has the effect of being able to call anything without proximity
limitation.

The practical reason to relax this restriction on JIT memory is that 128MB of
JIT memory can be quickly exhausted, especially where PAGE_SIZE is 64KB - one
page is needed per program. In cases where seccomp filters are applied to
multiple VMs on VM launch - such filters are classic BPF but converted to
BPF - this can severely limit the number of VMs that can be launched. In a
world where we support BPF JIT always on, turning off the JIT isn't always an
option either.

Fixes: 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory")
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <russell.king@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/1636131046-5982-2-git-send-email-alan.maguire@oracle.com
Reviewed-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2

commit dc5d4aff2e99c312df8abbe1ee9a731d2913bc1b upstream.

For some reason this file isn't using the appropriate register
headers for DCN headers, which means that on DCN2 we're getting
the VIEWPORT_DIMENSION offset wrong.

This means that we're not correctly carving out the framebuffer
memory correctly for a framebuffer allocated by EFI and
therefore see corruption when loading amdgpu before the display
driver takes over control of the framebuffer scanout.

Fix this by checking the DCE_HWIP and picking the correct offset
accordingly.

Long-term we should expose this info from DC as GMC shouldn't
need to know about DCN registers.

Cc: stable@vger.kernel.org
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

select: Fix indefinitely sleeping task in poll_schedule_timeout()

commit 68514dacf2715d11b91ca50d88de047c086fea9c upstream.

A task can end up indefinitely sleeping in do_select() ->
poll_schedule_timeout() when the following race happens:

  TASK1 (thread1)             TASK2                   TASK1 (thread2)
  do_select()
    setup poll_wqueues table
    with 'fd'
                              write data to 'fd'
                                pollwake()
                                  table->triggered = 1
                                                      closes 'fd' thread1 is
                                                        waiting for
    poll_schedule_timeout()
      - sees table->triggered
      table->triggered = 0
      return -EINTR
    loop back in do_select()

But at this point when TASK1 loops back, the fdget() in the setup of
poll_wqueues fails.  So now so we never find 'fd' is ready for reading
and sleep in poll_schedule_timeout() indefinitely.

Treat an fd that got closed as a fd on which some event happened.  This
makes sure cannot block indefinitely in do_select().

Another option would be to return -EBADF in this case but that has a
potential of subtly breaking applications that excercise this behavior
and it happens to work for them.  So returning fd as active seems like a
safer choice.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: Tighten rcu_advance_cbs_nowake() checks

commit 614ddad17f22a22e035e2ea37a04815f50362017 upstream.

Currently, rcu_advance_cbs_nowake() checks that a grace period is in
progress, however, that grace period could end just after the check.
This commit rechecks that a grace period is still in progress while
holding the rcu_node structure's lock.  The grace period cannot end while
the current CPU's rcu_node structure's ->lock is held, thus avoiding
false positives from the WARN_ON_ONCE().

As Daniel Vacek noted, it is not necessary for the rcu_node structure
to have a CPU that has not yet passed through its quiescent state.

Tested-by: Guillaume Morin <guillaume@morinfr.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: better bounds on the memcg stats updates

commit 5b3be698a872c490dbed524f3e2463701ab21339 upstream.

Commit 11192d9c124d ("memcg: flush stats only if updated") added
tracking of memcg stats updates which is used by the readers to flush
only if the updates are over a certain threshold.  However each
individual update can correspond to a large value change for a given
stat.  For example adding or removing a hugepage to an LRU changes the
stat by thp_nr_pages (512 on x86_64).

Treating the update related to THP as one can keep the stat off, in
theory, by (thp_nr_pages * nr_cpus * CHARGE_BATCH) before flush.

To handle such scenarios, this patch adds consideration of the stat
update value as well instead of just the update event.  In addition let
the asyn flusher unconditionally flush the stats to put time limit on
the stats skew and hopefully a lot less readers would need to flush.

Link: https://lkml.kernel.org/r/20211118065350.697046-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: unify memcg stat flushing

commit fd25a9e0e23b995fd0ba5e2f00a1099452cbc3cf upstream.

The memcg stats can be flushed in multiple context and potentially in
parallel too.  For example multiple parallel user space readers for
memcg stats will contend on the rstat locks with each other.  There is
no need for that.  We just need one flusher and everyone else can
benefit.

In addition after aa48e47e3906 ("memcg: infrastructure to flush memcg
stats") the kernel periodically flush the memcg stats from the root, so,
the other flushers will potentially have much less work to do.

Link: https://lkml.kernel.org/r/20211001190040.48086-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: flush stats only if updated

commit 11192d9c124d58d66449b163ed0d2cdff03761a1 upstream.

At the moment, the kernel flushes the memcg stats on every refault and
also on every reclaim iteration.  Although rstat maintains per-cpu
update tree but on the flush the kernel still has to go through all the
cpu rstat update tree to check if there is anything to flush.  This
patch adds the tracking on the stats update side to make flush side more
clever by skipping the flush if there is no update.

The stats update codepath is very sensitive performance wise for many
workloads and benchmarks.  So, we can not follow what the commit
aa48e47e3906 ("memcg: infrastructure to flush memcg stats") did which
was triggering async flush through queue_work() and caused a lot
performance regression reports.  That got reverted by the commit
1f828223b799 ("memcg: flush lruvec stats in the refault").

In this patch we kept the stats update codepath very minimal and let the
stats reader side to flush the stats only when the updates are over a
specific threshold.  For now the threshold is (nr_cpus * CHARGE_BATCH).

To evaluate the impact of this patch, an 8 GiB tmpfs file is created on
a system with swap-on-zram and the file was pushed to swap through
memory.force_empty interface.  On reading the whole file, the memcg stat
flush in the refault code path is triggered.  With this patch, we
observed 63% reduction in the read time of 8 GiB file.

Link: https://lkml.kernel.org/r/20211001190040.48086-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Reviewed-by: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Invalidate fastpath HSI version for VFs

commit 802d4d207e75d7208ff75adb712b556c1e91cf1c upstream

Commit 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.")
added validation for fastpath HSI versions for different
client init which was not meant for SR-IOV VF clients, which
resulted in firmware asserts when running VF clients with
different fastpath HSI version.

This patch along with the new firmware support in patch #1
fixes this behavior in order to not validate fastpath HSI
version for the VFs.

Fixes: 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Utilize firmware 7.13.21.0

commit b7a49f73059fe6147b6b78e8f674ce0d21237432 upstream

This new firmware addresses few important issues and enhancements
as mentioned below -

- Support direct invalidation of FP HSI Ver per function ID, required for
  invalidating FP HSI Ver prior to each VF start, as there is no VF start
- BRB hardware block parity error detection support for the driver
- Fix the FCOE underrun flow
- Fix PSOD during FCoE BFS over the NIC ports after preboot driver
- Maintains backward compatibility

This patch incorporates this new firmware 7.13.21.0 in bnx2x driver.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix not released cached task refs

commit 3cc7fdb9f90a25ae92250bf9e6cf3b9556b230e9 upstream.

tctx_task_work() may get run after io_uring cancellation and so there
will be no one to put cached in tctx task refs that may have been added
back by tw handlers using inline completion infra, Call
io_uring_drop_tctx_refs() at the end of the main tw handler to release
them.

Cc: stable@vger.kernel.org # 5.15+
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: e98e49b2bbf7 ("io_uring: extend task put optimisations")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/69f226b35fbdb996ab799a8bbc1c06bf634ccec1.1641688805.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: reset dcn31 SMU mailbox on failures

commit 83293f7f3d15fc56e86bd5067a2c88b6b233ac3a upstream.

Otherwise future commands may fail as well leading to downstream
problems that look like they stemmed from a timeout the first time
but really didn't.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Flush TLBs before releasing backing store

commit 7938d61591d33394a21bdd7797a245b65428f44c upstream.

We need to flush TLBs before releasing backing store otherwise userspace
is able to encounter stale entries if a) it is not declaring access to
certain buffers and b) it races with the backing store release from a
such undeclared execution already executing on the GPU in parallel.

The approach taken is to mark any buffer objects which were ever bound
to the GPU and to trigger a serialized TLB flush when their backing
store is released.

Alternatively the flushing could be done on VMA unbind, at which point
we would be able to ascertain whether there is potential a parallel GPU
execution (which could race), but essentially it boils down to paying
the cost of TLB flushes potentially needlessly at VMA unbind time (when
the backing store is not known to be going away so not needed for
safety), versus potentially needlessly at backing store relase time
(since we at that point cannot tell whether there is anything executing
on the GPU which uses that object).

Thereforce simplicity of implementation has been chosen for now with
scope to benchmark and refine later as required.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.17

Link: https://lore.kernel.org/r/20220124184100.867127425@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/20220125155423.959812122@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Tom Saeger <tom.saeger@oracle.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: sphinx-pre-install: Fix ctex support on Debian

commit 87d6576ddf8ac25f36597bc93ca17f6628289c16 upstream.

The name of the package with ctexhook.sty is different on
Debian/Ubuntu.

Reported-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/63882425609a2820fac78f5e94620abeb7ed5f6f.1641429634.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: sphinx-pre-install: add required ctex dependency

commit 7baab965896eaeea60a54b8fe742feea2f79060f upstream.

After a change meant to fix support for oriental characters
(Chinese, Japanese, Korean), ctex stylesheet is now a requirement
for PDF output.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/165aa6167f21e3892a6e308688c93c756e94f4e0.1641243581.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() test

commit e073e5ef90298d2d6e5e7f04b545a0815e92110c upstream.

Make do_kmem_cache_size_bulk() destroy the cache it creates.

Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com
Fixes: 03a9349ac0e0 ("lib/test_meminit: add a kmem_cache_alloc_bulk() test")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: Fix extraction of ports from the packet headers

commit 429e3d123d9a50cc9882402e40e0ac912d88cfcf upstream.

Wrong hash sends single stream to multiple output interfaces.

The offset calculation was relative to skb->head, fix it to be relative
to skb->data.

Fixes: a815bde56b15 ("net, bonding: Refactor bond_xmit_hash for use with
xdp_buff")
Reviewed-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault

commit 87c01d57fa23de82fff593a7d070933d08755801 upstream.

hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.

To make hmm_range_fault() more closely match get_user_pages() remove
this restriction.  This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte().  Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.

Also add a test to hmm selftest to verify functionality.

Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com
Fixes: da4c3c735ea4 ("mm/hmm/mirror: helper to snapshot CPU page table")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib82596: Fix IRQ check in sni_82596_probe

commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream.

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/dtc: dtx_diff: remove broken example from help text

commit d8adf5b92a9d2205620874d498c39923ecea8749 upstream.

dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but
this has never worked: The /proc/self/fds/... paths passed by the shell
will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts,
but even with this check removed, the function cannot work: hexdump will
eat up the DTB magic, making the subsequent dtc call fail, as a pipe
cannot be rewound.

Simply remove this broken example, as there is already an alternative one
that works fine.

Fixes: 10eadc253ddf ("dtc: create tool to diff device trees")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_api: Don't skip qdisc attach on ingress

commit de2d807b294d3d2ce5e59043ae2634016765d076 upstream.

The attach callback of struct Qdisc_ops is used by only a few qdiscs:
mq, mqprio and htb. qdisc_graft() contains the following logic
(pseudocode):

    if (!qdisc->ops->attach) {
        if (ingress)
            do ingress stuff;
        else
            do egress stuff;
    }
    if (!ingress) {
        ...
        if (qdisc->ops->attach)
            qdisc->ops->attach(qdisc);
    } else {
        ...
    }

As we see, the attach callback is not called if the qdisc is being
attached to ingress (TC_H_INGRESS). That wasn't a problem for mq and
mqprio, since they contain a check that they are attached to TC_H_ROOT,
and they can't be attached to TC_H_INGRESS anyway.

However, the commit cited below added the attach callback to htb. It is
needed for the hardware offload, but in the non-offload mode it
simulates the "do egress stuff" part of the pseudocode above. The
problem is that when htb is attached to ingress, neither "do ingress
stuff" nor attach() is called. It results in an inconsistency, and the
following message is printed to dmesg:

unregister_netdevice: waiting for lo to become free. Usage count = 2

This commit addresses the issue by running "do ingress stuff" in the
ingress flow even in the attach callback is present, which is fine,
because attach isn't going to be called afterwards.

The bug was found by syzbot and reported by Eric.

Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7

commit 33950f9a36aca55c2b1e6062d9b29f3e97f91c40 upstream.

Exynos7 watchdog driver is clearly indicating that its dts node must
define syscon phandle property. That was probably forgotten, so add it.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: 2b9366b66967 ("watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-2-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: display: meson-vpu: Add missing amlogic,canvas property

commit 640f35b871d29cd685ce0ea0762636381beeb98a upstream.

This property was already mentioned in the old textual bindings
amlogic,meson-vpu.txt, but got dropped during conversion.
Adding it back similar to amlogic,gx-vdec.yaml.

Fixes: 6b9ebf1e0e67 ("dt-bindings: display: amlogic, meson-vpu: convert to yaml")
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211219094155.177206-1-alexander.stein@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: display: meson-dw-hdmi: add missing sound-name-prefix property

commit 22bf4047d26980807611b7e2030803db375afd87 upstream.

This is used in meson-gx and meson-g12. Add the property to the binding.
This fixes the dtschema warning:
hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Fixes: 376bf52deef5 ("dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211223122434.39378-2-alexander.stein@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mscc: ocelot: fix using match before it is set

commit baa59504c1cd0cca7d41954a45ee0b3dc78e41a0 upstream.

Clang static analysis reports this issue
ocelot_flower.c:563:8: warning: 1st function call argument
  is an uninitialized value
    !is_zero_ether_addr(match.mask->dst)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The variable match is used before it is set.  So move the
block.

Fixes: 75944fda1dfe ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices

commit f1131b9c23fb4a3540a774828ff49f421619f902 upstream.

On a setup with KSZ9131 and MACB drivers it happens on suspend path, from
time to time, that the PHY interrupt arrives after PHY and MACB were
suspended (PHY via genphy_suspend(), MACB via macb_suspend()). In this
case the phy_read() at the beginning of kszphy_handle_interrupt() will
fail (as MACB driver is suspended at this time) leading to phy_error()
being called and a stack trace being displayed on console. To solve this
.suspend/.resume functions for all KSZ devices implementing
.handle_interrupt were replaced with kszphy_suspend()/kszphy_resume()
which disable/enable interrupt before/after calling
genphy_suspend()/genphy_resume().

The fix has been adapted for all KSZ devices which implements
.handle_interrupt but it has been tested only on KSZ9131.

Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

commit 1771afd47430f5e95c9c3a2e3a8a63e67402d3fe upstream.

Both versions of the CPSW driver declare a CPSW_HEADROOM_NA macro that
takes NET_IP_ALIGN into account, but fail to use it appropriately when
storing incoming packets in memory. This results in the IPv4 source and
destination addresses to appear misaligned in memory, which causes
aligment faults that need to be fixed up in software.

So let's switch from CPSW_HEADROOM to CPSW_HEADROOM_NA where needed.
This gets rid of any alignment faults on the RX path on a Beaglebone
White.

Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support")
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sfp: fix high power modules without diagnostic monitoring

commit 5765cee119bf5a36c94d20eceb37c445508934be upstream.

Commit 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change
modules") unintetionally changed the semantics for high power modules
without the digital diagnostics monitoring. We repeatedly attempt to
read the power status from the non-existing 0xa2 address in a futile
hope this failure is temporary:

[    8.856051] sfp sfp-eth3: module NTT              0000000000000000 rev 0000  sn 0000000000000000 dc 160408
[    8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode
[    8.873469] sfp sfp-eth3: Failed to read EEPROM: -5
[    8.983251] sfp sfp-eth3: Failed to read EEPROM: -5
[    9.103250] sfp sfp-eth3: Failed to read EEPROM: -5

We previosuly assumed such modules were powered up in the correct mode,
continuing without further configuration as long as the required power
class was supported by the host.

Restore this behaviour, while preserving the intent of subsequent
patches to avoid the "Address Change Sequence not supported" warning
if we are not going to be accessing the DDM address.

Fixes: 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change modules")
Reported-by: 照山周一郎 <teruyama@springboard-inc.jp>
Tested-by: 照山周一郎 <teruyama@springboard-inc.jp>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ocelot: Fix the call to switchdev_bridge_port_offload

commit c0b7f7d7e0ad44f35745c01964b3fa2833e298cb upstream.

In the blamed commit, the call to the function
switchdev_bridge_port_offload was passing the wrong argument for
atomic_nb. It was ocelot_netdevice_nb instead of ocelot_swtchdev_nb.
This patch fixes this issue.

Fixes: 4e51bf44a03af6 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: mtk_eth_soc: fix error checking in mtk_mac_config()

commit 214b3369ab9b0a6f28d6c970220c209417edbc65 upstream.

Clang static analysis reports this problem
mtk_eth_soc.c:394:7: warning: Branch condition evaluates
  to a garbage value
                if (err)
                    ^~~

err is not initialized and only conditionally set.
So intitialize err.

Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: wwan: Fix MRU mismatch issue which may lead to data connection lost

commit f542cdfa3083a309e3caafbbdf41490c4935492a upstream.

In pci_generic.c there is a 'mru_default' in struct mhi_pci_dev_info.
This value shall be used for whole mhi if it's given a value for a specific product.
But in function mhi_net_rx_refill_work(), it's still using hard code value MHI_DEFAULT_MRU.
'mru_default' shall have higher priority than MHI_DEFAULT_MRU.
And after checking, this change could help fix a data connection lost issue.

Fixes: 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
Signed-off-by: Shujun Wang <wsj20369@163.com>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcmgenet: add WOL IRQ check

commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream.

The driver neglects to check the result of platform_get_irq_optional()'s
call and blithely passes the negative error codes to devm_request_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL.
Stop calling devm_request_irq() with the invalid IRQ #s.

Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mscc: ocelot: don't let phylink re-enable TX PAUSE on the NPI port

commit 33cb0ff30cff104e753f7882c99e54cf67ea7903 upstream.

Since commit b39648079db4 ("net: mscc: ocelot: disable flow control on
NPI interface"), flow control should be disabled on the DSA CPU port
when used in NPI mode.

However, the commit blamed in the Fixes: tag below broke this, because
it allowed felix_phylink_mac_link_up() to overwrite SYS_PAUSE_CFG_PAUSE_ENA
for the DSA CPU port.

This issue became noticeable since the device tree update from commit
8fcea7be5736 ("arm64: dts: ls1028a: mark internal links between Felix
and ENETC as capable of flow control").

The solution is to check whether this is the currently configured NPI
port from ocelot_phylink_mac_link_up(), and to not modify the statically
disabled PAUSE frame transmission if it is.

When the port is configured for lossless mode as opposed to tail drop
mode, but the link partner (DSA master) doesn't observe the transmitted
PAUSE frames, the switch termination throughput is much worse, as can be
seen below.

Before:

root@debian:~# iperf3 -c 192.168.100.2
Connecting to host 192.168.100.2, port 5201
[  5] local 192.168.100.1 port 37504 connected to 192.168.100.2 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  28.4 MBytes   238 Mbits/sec  357   22.6 KBytes
[  5]   1.00-2.00   sec  33.6 MBytes   282 Mbits/sec  426   19.8 KBytes
[  5]   2.00-3.00   sec  34.0 MBytes   285 Mbits/sec  343   21.2 KBytes
[  5]   3.00-4.00   sec  32.9 MBytes   276 Mbits/sec  354   22.6 KBytes
[  5]   4.00-5.00   sec  32.3 MBytes   271 Mbits/sec  297   18.4 KBytes
^C[  5]   5.00-5.06   sec  2.05 MBytes   270 Mbits/sec   45   19.8 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-5.06   sec   163 MBytes   271 Mbits/sec  1822             sender
[  5]   0.00-5.06   sec  0.00 Bytes  0.00 bits/sec                  receiver

After:

root@debian:~# iperf3 -c 192.168.100.2
Connecting to host 192.168.100.2, port 5201
[  5] local 192.168.100.1 port 49470 connected to 192.168.100.2 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   112 MBytes   941 Mbits/sec  259    143 KBytes
[  5]   1.00-2.00   sec   110 MBytes   920 Mbits/sec  329    144 KBytes
[  5]   2.00-3.00   sec   112 MBytes   936 Mbits/sec  255    144 KBytes
[  5]   3.00-4.00   sec   110 MBytes   927 Mbits/sec  355    105 KBytes
[  5]   4.00-5.00   sec   110 MBytes   926 Mbits/sec  350    156 KBytes
[  5]   5.00-6.00   sec   110 MBytes   925 Mbits/sec  305    148 KBytes
[  5]   6.00-7.00   sec   110 MBytes   924 Mbits/sec  320    143 KBytes
[  5]   7.00-8.00   sec   110 MBytes   925 Mbits/sec  273   97.6 KBytes
[  5]   8.00-9.00   sec   109 MBytes   913 Mbits/sec  299    141 KBytes
[  5]   9.00-10.00  sec   110 MBytes   922 Mbits/sec  287    146 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.08 GBytes   926 Mbits/sec  3032             sender
[  5]   0.00-10.00  sec  1.08 GBytes   925 Mbits/sec                  receiver

Fixes: de274be32cb2 ("net: dsa: felix: set TX flow control according to the phylink_mac_link_up resolution")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: restore "mpu xxx" handling

commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.

commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.

"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:

    tc class add ... htb rate X overhead 4 mpu 64

The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.

iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.

Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.

Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).

"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.

"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.

As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.

Fixes: 56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Vimalkumar <j.vimal@gmail.com>
Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipa: fix atomic update in ipa_endpoint_replenish()

commit 6c0e3b5ce94947b311348c367db9e11dcb2ccc93 upstream.

In ipa_endpoint_replenish(), if an error occurs when attempting to
replenish a receive buffer, we just quit and try again later.  In
that case we increment the backlog count to reflect that the attempt
was unsuccessful.  Then, if the add_one flag was true we increment
the backlog again.

This second increment is not included in the backlog local variable
though, and its value determines whether delayed work should be
scheduled.  This is a bug.

Fix this by determining whether 1 or 2 should be added to the
backlog before adding it in a atomic_add_return() call.

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bonding: fix bond_xmit_broadcast return value error bug

commit 4e5bd03ae34652cd932ab4c91c71c511793df75c upstream.

In Linux bonding scenario, one packet is copied to several copies and sent
by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit
function bond_xmit_broadcast() only ueses the last slave device's tx result
as the final result. In this case, if the last slave device is down, then
it always return NET_XMIT_DROP, even though the other slave devices xmit
success. It may cause the tx statistics error, and cause the application
(e.g. scp) consider the network is unreachable.

For example, use the following command to configure server A.

echo 3 > /sys/class/net/bond0/bonding/mode
ifconfig bond0 up
ifenslave bond0 eth0 eth1
ifconfig bond0 192.168.1.125
ifconfig eth0 up
ifconfig eth1 down
The slave device eth0 and eth1 are connected to server B(192.168.1.107).
Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information
is displayed.

PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data.
64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms
64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms
64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms

 192.168.1.107 ping statistics
0 packets transmitted, 3 received

Actually, the slave device eth0 of the bond successfully sends three
ICMP packets, but the result shows that 0 packets are transmitted.

Also if we use scp command to get remote files, the command end with the
following printings.

ssh_exchange_identification: read: Connection timed out

So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS
if one slave device in the bond sends packets successfully. If all slave
devices send packets fail, the discarded packets stats is increased. The
skb is released when there is no slave device in the bond or the last slave
device is down.

Fixes: ae46f184bc1f ("bonding: propagate transmit status")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix sock_timestamping_bind_phc() to release device

commit 2a4d75bfe41232608f5596a6d1369f92ccb20817 upstream.

Don't forget to release the device in sock_timestamping_bind_phc() after
it was used to get the vclock indices.

Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: msm8996: drop not documented adreno properties

commit c41910f257a22dc406c60d8826b4a3b5398003a3 upstream.

These properties aren't documented nor implemented in the driver.
Drop them.

Fixes warnings as:
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml
...
arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml
...

Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: Remove misleading internal_flags from health reporter dump

commit e9538f8270db24d272659e15841854c7ea11119e upstream.

DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.

Fixes: e44ef4e4516c ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Fix ppc64 'perf probe add events failed' case

commit 4624f199327a704dd1069aca1c3cadb8f2a28c6f upstream.

Because of commit bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.

But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:

  cat /proc/kallsyms | grep -w schedule
  c000000000657020 T .schedule
  c000000000d4fdb8 D schedule

The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+13958584"Failed to write event: Invalid argument

Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.

Fixes: bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen <chenzechuan1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jianlin Lv <Jianlin.Lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Drop requirement for libstdc++.so for libopencsd check

commit ed17b1914978eddb2b01f2d34577f1c82518c650 upstream.

It's possible to link against libopencsd_c_api without having
libstdc++.so available, only libstdc++.so.6.0.28 (or whatever version is
in use) needs to be available. The same holds true for libopencsd.so.
When -lstdc++ (or -lopencsd) is explicitly passed to the linker however
the .so file must be available.

So wrap adding the dependencies into a check for static linking that
actually requires adding them all. The same construct is already used
for some other tests in the same file to reduce dependencies in the
dynamic linking case.

Fixes: 573cf5c9a152 ("perf build: Add missing -lstdc++ when linking with libopencsd")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Adrian Bunk <bunk@debian.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/all/20211203210544.1137935-1-uwe@kleine-koenig.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: Fix at_xdmac_lld struct definition

commit 912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream.

The hardware channel next descriptor view structure contains just
fields of 32 bits, while dma_addr_t can be of type u64 or u32
depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with
what the hardware expects.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: Fix lld view setting

commit 1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream.

AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2,
because of the wrong bit handling. Fix it.

Fixes: ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: Fix concurrency over xfers_list

commit 18deddea9184b62941395889ff7659529c877326 upstream.

Since tx_submit can be called from a hard IRQ, xfers_list must be
protected with a lock to avoid concurency on the list's elements.
Since at_xdmac_handle_cyclic() is called from a tasklet, spin_lock_irq
is enough to protect from a hard IRQ.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-8-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: Print debug message after realeasing the lock

commit 5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream.

It is desirable to do the prints without the lock held if possible, so
move the print after the lock is released.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending

commit e6af9b05bec63cd4d1de2a33968cd0be2a91282a upstream.

Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-3-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: Don't start transactions at tx_submit level

commit bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream.

tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).

As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf script: Fix hex dump character output

commit 62942e9fda9fd1def10ffcbd5e1c025b3c9eec17 upstream.

Using grep -C with perf script -D can give erroneous results as grep loses
lines due to non-printable characters, for example, below the 0020, 0060
and 0070 lines are missing:

 $ perf script -D | grep -C10 AUX | head
 .  0010:  08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00  ................
 .  0030:  01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00  ................
 .  0040:  00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00  ................
 .  0050:  00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
 .  0080:  02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00  ................
 .  0090:  00 00 00 00 00 00 00 00                          ........

 0 0 0x450 [0x98]: PERF_RECORD_AUXTRACE_INFO type: 1
   PMU Type            8
   Time Shift          31

perf's isprint() is a custom implementation from the kernel, but the
kernel's _ctype appears to include characters from Latin-1 Supplement which
is not compatible with, for example, UTF-8. Fix by checking also isascii().

After:

 $ tools/perf/perf script -D | grep -C10 AUX | head
 .  0010:  08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00  ................
 .  0020:  03 84 32 2f 00 00 00 00 63 7c 4f d2 fa ff ff ff  ..2/....c|O.....
 .  0030:  01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00  ................
 .  0040:  00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00  ................
 .  0050:  00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
 .  0060:  00 02 00 00 00 00 00 00 00 c0 03 00 00 00 00 00  ................
 .  0070:  e2 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00  ................
 .  0080:  02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00  ................
 .  0090:  00 00 00 00 00 00 00 00                          ........

Fixes: 3052ba56bcb58904 ("tools perf: Move from sane_ctype.h obtained from git to the Linux's original")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20220112085057.277205-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()

commit a915deaa9abe4fb3a440312c954253a6a733608e upstream.

Mask the ECN bits before calling ip_route_output_ports(). The tos
variable might be passed directly from an IPv4 header, so it may have
the last ECN bit set. This interferes with the route lookup process as
ip_route_output_key_hash() interpretes this bit specially (to restrict
the route scope).

Found by code inspection, compile tested only.

Fixes: 804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gre: Don't accidentally set RTO_ONLINK in gre_fill_metadata_dst()

commit f7716b318568b22fbf0e3be99279a979e217cf71 upstream.

Mask the ECN bits before initialising ->flowi4_tos. The tunnel key may
have the last ECN bit set, which will interfere with the route lookup
process as ip_route_output_key_hash() interpretes this bit specially
(to restrict the route scope).

Found by code inspection, compile tested only.

Fixes: 962924fa2b7a ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()

commit 37e07e705888e4c3502f204e9c6785c9c2d6d86a upstream.

Restore ndev->cur_num_vqs to the original value in case change_num_qps()
fails.

Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-10-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Don't accidentally set RTO_ONLINK in decode_session4()

commit 23e7b1bfed61e301853b5e35472820d919498278 upstream.

Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"),
clear the ECN bits from iph->tos when setting ->flowi4_tos.
This ensures that the last bit of ->flowi4_tos is cleared, so
ip_route_output_key_hash() isn't going to restrict the scope of the
route lookup.

Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason
to clear the high order bits.

Found by code inspection, compile tested only.

Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fix Bz NMI behaviour

commit fdfde0cb79264f88992e72b5a056a3a3284fcaad upstream.

Contrary to what was stated before, the hardware hasn't changed
the bits here yet. In any case, the new CSR is also directly
(lower 16 bits) connected to UREG_DOORBELL_TO_ISR6, so if it
still changes the changes would be there. Adjust the code and
comments accordingly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6c0795f1a524 ("iwlwifi: implement Bz NMI behaviour")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.75b6207536e3.I7d170a48a9096e6b7269c3a9f447c326f929b171@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netns: add schedule point in ops_exit_list()

commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.

When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.

Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.

[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
    ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
    This will be fixed in a separate patch.

Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: annotate races around fqdir->dead and fqdir->high_thresh

commit 91341fa0003befd097e190ec2a4bf63ad957c49a upstream.

Both fields can be read/written without synchronization,
add proper accessors and documentation.

Fixes: d5dd88794a13 ("inet: fix various use-after-free in defrags units")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

taskstats: Cleanup the use of task->exit_code

commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.

In the function bacct_add_task the code reading task->exit_code was
introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.

As best as I can figure the intent is to return task->exit_code after
a task exits.  The field is returned with per task fields, so the
exit_code of the entire process is not wanted.  Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code.  The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.

It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.

Make ac_exitcode a reliable per task value by always returning it for
every exited task.

Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.

Cc: Balbir Singh <bsingharora@gmail.com>
Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_ring: mark ring unused on error

commit 1861ba626ae9b98136f3e504208cdef6b29cd3ec upstream.

A recently added error path does not mark ring unused when exiting on
OOM, which will lead to BUG on the next entry in debug builds.

TODO: refactor code so we have START_USE and END_USE in the same function.

Fixes: fc6d70f40b3d ("virtio_ring: check desc == NULL when using indirect with packed")
Cc: "Xuan Zhuo" <xuanzhuo@linux.alibaba.com>
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa/mlx5: Fix wrong configuration of virtio_version_1_0

commit 97143b70aa847f2b0a1f959dde126b76ff7b5376 upstream.

Remove overriding of virtio_version_1_0 which forced the virtqueue
object to version 1.

Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211230142024.142979-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pxa: fix null pointer dereference

commit 34127b3632b21e5c391756e724b1198eb9917981 upstream.

With the latest stable kernel versions the rtc on the PXA based
Zaurus does not work, when booting I see the following kernel messages:

pxa-rtc pxa-rtc: failed to find rtc clock source
pxa-rtc pxa-rtc: Unable to init SA1100 RTC sub-device
pxa-rtc: probe of pxa-rtc failed with error -2
hctosys: unable to open rtc device (rtc0)

I think this is because commit f2997775b111 ("rtc: sa1100: fix possible
race condition") moved the allocation of the rtc_device struct out of
sa1100_rtc_init and into sa1100_rtc_probe. This means that pxa_rtc_probe
also needs to do allocation for the rtc_device struct, otherwise
sa1100_rtc_init will try to dereference a null pointer. This patch adds
that allocation by copying how sa1100_rtc_probe in
drivers/rtc/rtc-sa1100.c does it; after the IRQs are set up a managed
rtc_device is allocated.

I've tested this patch with `qemu-system-arm -machine akita` and with a
real Zaurus SL-C1000 applied to 4.19, 5.4, and 5.10.

Signed-off-by: Laurence de Bruxelles <lfdebrux@gmail.com>
Fixes: f2997775b111 ("rtc: sa1100: fix possible race condition")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220101154149.12026-1-lfdebrux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: vivaldi: fix handling devices not using numbered reports

commit 3fe6acd4dc922237b30e55473c9349c6ce0690f3 upstream.

Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.

Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.

[jkosina@suse.cz: microoptimize field->report->id to report->id]
Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: gitignore: Add kernel/capflags.c

commit 4b86366fdfbedec42f8f7ee037775f2839921d34 upstream.

This file is generated, we should ignore it.

Fixes: d8fb32f4790f ("um: Add support for host CPU flags and alignment")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton.ivanov@cambridgegreys.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bitops: protect find_first_{,zero}_bit properly

commit b7ec62d7ee0f0b8af6ba190501dff7f9ee6545ca upstream.

find_first_bit() and find_first_zero_bit() are not protected with
ifdefs as other functions in find.h. It causes build errors on some
platforms if CONFIG_GENERIC_FIND_FIRST_BIT is enabled.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Fixes: 2cc7b6a44ac2 ("lib: add fast path for find_first_*_bit() and find_last_bit()")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: increase default TX ring size to 128

commit 2d19c3fd80178160dd505ccd7fed1643831227a5 upstream.

With previous changes to make the driver handle the TX ring size more
correctly, the default TX ring size of 64 appears to significantly
bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP.
Increasing this to 128 seems to bring performance up to near line rate and
shouldn't cause excess bufferbloat (this driver doesn't yet support modern
byte-based queue management).

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: fix for TX busy handling

commit bb193e3db8b86a63f26889c99e14fd30c9ebd72a upstream.

Network driver documentation indicates we should be avoiding returning
NETDEV_TX_BUSY from ndo_start_xmit in normal cases, since it requires
the packets to be requeued. Instead the queue should be stopped after
a packet is added to the TX ring when there may not be enough room for an
additional one. Also, when TX ring entries are completed, we should only
wake the queue if we know there is room for another full maximally
fragmented packet.

Print a warning if there is insufficient space at the start of start_xmit,
since this should no longer happen.

Combined with increasing the default TX ring size (in a subsequent
patch), this appears to recover the TX performance lost by previous changes
to actually manage the TX ring state properly.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: fix number of TX ring slots for available check

commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream.

The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: Fix TX ring slot available check

commit 996defd7f8b5dafc1d480b7585c7c62437f80c3c upstream.

The check for whether a TX ring slot was available was incorrect,
since a slot which had been loaded with transmit data but the device had
not started transmitting would be treated as available, potentially
causing non-transmitted slots to be overwritten. The control field in
the descriptor should be checked, rather than the status field (which may
only be updated when the device completes the entry).

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: limit minimum TX ring size

commit 70f5817deddbc6ef3faa35841cab83c280cc653a upstream.

The driver will not work properly if the TX ring size is set to below
MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally
fragmented packet in the TX ring. Limit setting the ring size to below
this value.

Fixes: 8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: add missing memory barriers

commit 95978df6fa328df619c15312e65ece469c2be2d2 upstream.

This driver was missing some required memory barriers:

Use dma_rmb to ensure we see all updates to the descriptor after we see
that an entry has been completed.

Use wmb and rmb to avoid stale descriptor status between the TX path and
TX complete IRQ path.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: reset core on initialization prior to MDIO access

commit 04cc2da39698efd7eb2e30c112538922d26f848e upstream.

In some cases where the Xilinx Ethernet core was used in 1000Base-X or
SGMII modes, which use the internal PCS/PMA PHY, and the MGT
transceiver clock source for the PCS was not running at the time the
FPGA logic was loaded, the core would come up in a state where the
PCS could not be found on the MDIO bus. To fix this, the Ethernet core
(including the PCS) should be reset after enabling the clocks, prior to
attempting to access the PCS using of_mdio_find_device.

Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: Wait for PhyRstCmplt after core reset

commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream.

When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.

The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: increase reset timeout

commit 2e5644b1bab2ccea9cfc7a9520af95b94eb0dbf1 upstream.

The previous timeout of 1ms was too short to handle some cases where the
core is reset just after the input clocks were started, which will
be introduced in an upcoming patch. Increase the timeout to 50ms. Also
simplify the reset timeout checking to use read_poll_timeout.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: Fix hung_task when removing SMC-R devices

commit 56d99e81ecbc997a5f984684d0eeb583992b2072 upstream.

A hung_task is observed when removing SMC-R devices. Suppose that
a link group has two active links(lnk_A, lnk_B) associated with two
different SMC-R devices(dev_A, dev_B). When dev_A is removed, the
link group will be removed from smc_lgr_list and added into
lgr_linkdown_list. lnk_A will be cleared and smcibdev(A)->lnk_cnt
will reach to zero. However, when dev_B is removed then, the link
group can't be found in smc_lgr_list and lnk_B won't be cleared,
making smcibdev->lnk_cnt never reaches zero, which causes a hung_task.

This patch fixes this issue by restoring the implementation of
smc_smcr_terminate_all() to what it was before commit 349d43127dac
("net/smc: fix kernel panic caused by race of smc_sock"). The original
implementation also satisfies the intention that make sure QP destroy
earlier than CQ destroy because we will always wait for smcibdev->lnk_cnt
reaches zero, which guarantees QP has been destroyed.

Fixes: 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: idt3243x: Fix IRQ check in idt_gpio_probe

commit 30fee1d7462a446ade399c0819717a830cbdca69 upstream.

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: 4195926aedca ("gpio: Add support for IDT 79RC3243x GPIO controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe

commit 0b39536cc699db6850c426db7f9cb45923de40c5 upstream.

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: 76c47d1449fc ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl/rockchip: fix gpio device creation

commit bceb6732f3fd2a55d8f2e518cced1c7555e216b6 upstream.

GPIO nodes are not themselves busses, so passing rockchip_bank_match
here is wrong.  Passing NULL instead uses the standard bus match table
which is more appropriate.

devm_of_platform_populate() shows that this is the normal way to call
of_platform_populate() from a device driver, so in order to match that
more closely also add the pinctrl device as the parent for the newly
created GPIO controllers.

Specifically, using the wrong match here can break dynamic GPIO hogs as
marking the GPIO bank as a bus means that of_platform_notify() will set
OF_POPULATED on new child nodes and if this happens before
of_gpio_notify() is called then the new hog will be skipped as
OF_POPULATED is already set.

Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211126151352.1509583-1-john@metanate.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: si5341: Fix clock HW provider cleanup

commit 49a8f2bc8d88702783c7e163ec84374e9a022f71 upstream.

The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.

Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112203816.1784610-1-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: Emit a stern warning with writable debugfs enabled

commit 489a71964f9d74e697a12cd0ace20ed829eb1f93 upstream.

We don't want vendors to be enabling this part of the clk code and
shipping it to customers. Exposing the ability to change clk frequencies
and parents via debugfs is potentially damaging to the system if folks
don't know what they're doing. Emit a strong warning so that the message
is clear: don't enable this outside of development systems.

Fixes: 37215da5553e ("clk: Add support for setting clk_rate via debugfs")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211210014237.2130300-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress

commit 9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream.

wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress
without synchronization.

Adds READ_ONCE()/WRITE_ONCE() and their associated comments
to better document the intent.

BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc

write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0:
 unix_inflight+0x1e8/0x260 net/unix/scm.c:63
 unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121
 unix_scm_to_skb net/unix/af_unix.c:1674 [inline]
 unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817
 unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
 __do_sys_sendmmsg net/socket.c:2578 [inline]
 __se_sys_sendmmsg net/socket.c:2575 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1:
 wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196
 unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772
 unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
 __do_sys_sendmmsg net/socket.c:2578 [inline]
 __se_sys_sendmmsg net/socket.c:2575 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000002 -> 0x00000004

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 9915672d4127 ("af_unix: limit unix_tot_inflight")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220114164328.2038499-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: octeontx2 - uninitialized variable in kvf_limits_store()

commit 0ea275df84c389e910a3575a9233075118c173ee upstream.

If kstrtoint() fails then "lfs_num" is uninitialized and the warning
doesn't make any sense.  Just delete it.

Fixes: 8ec8015a3168 ("crypto: octeontx2 - add support to process the crypto request")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to check available space of CP area correctly in update_ckpt_flags()

commit b702c83e2eaa2fa2d72e957c55c0321535cc8b9f upstream.

Otherwise, nat_bit area may be persisted across boundary of CP area during
nat_bit rebuilding.

Fixes: 94c821fb286b ("f2fs: rebuild nat_bits during umount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to reserve space for IO align feature

commit 300a842937fbcfb5a189cea9ba15374fdb0b5c6b upstream.

https://bugzilla.kernel.org/show_bug.cgi?id=204137

With below script, we will hit panic during new segment allocation:

DISK=bingo.img
MOUNT_DIR=/mnt/f2fs

dd if=/dev/zero of=$DISK bs=1M count=105
mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK

mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict"

for (( i = 0; i < 4096; i++ )); do
name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10`
mkdir $MOUNT_DIR/$name
done

umount $MOUNT_DIR
rm $DISK

f2fs: compress: fix potential deadlock of compress file

commit 7377e853967ba45bf409e3b5536624d2cbc99f21 upstream.

There is a potential deadlock between writeback process and a process
performing write_begin() or write_cache_pages() while trying to write
same compress file, but not compressable, as below:

[Process A] - doing checkpoint
[Process B]                     [Process C]
f2fs_write_cache_pages()
- lock_page() [all pages in cluster, 0-31]
- f2fs_write_multi_pages()
 - f2fs_write_raw_pages()
  - f2fs_write_single_data_page()
   - f2fs_do_write_data_page()
     - return -EAGAIN [f2fs_trylock_op() failed]
   - unlock_page(page) [e.g., page 0]
                                - generic_perform_write()
                                 - f2fs_write_begin()
                                  - f2fs_prepare_compress_overwrite()
                                   - prepare_compress_overwrite()
                                    - lock_page() [e.g., page 0]
                                    - lock_page() [e.g., page 1]
   - lock_page(page) [e.g., page 0]

Since there is no compress process, it is no longer necessary to hold
locks on every pages in cluster within f2fs_write_raw_pages().

This patch changes f2fs_write_raw_pages() to release all locks first
and then perform write same as the non-compress file in
f2fs_write_cache_pages().

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to avoid panic in is_alive() if metadata is inconsistent

commit f6db43076d190d9bf75559dec28e18b9d12e4ce5 upstream.

As report by Wenqing Liu in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=215231

If we enable CONFIG_F2FS_CHECK_FS config, and with fuzzed image attached
in above link, we will encounter panic when executing below script:

1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp

F2FS-fs (loop11): mismatched blkaddr 5765 (source_blkaddr 1) in seg 3
kernel BUG at fs/f2fs/gc.c:1042!
 do_garbage_collect+0x90f/0xa80 [f2fs]
 f2fs_gc+0x294/0x12a0 [f2fs]
 f2fs_balance_fs+0x2c5/0x7d0 [f2fs]
 f2fs_create+0x239/0xd90 [f2fs]
 lookup_open+0x45e/0xa90
 open_last_lookups+0x203/0x670
 path_openat+0xae/0x490
 do_filp_open+0xbc/0x160
 do_sys_openat2+0x2f1/0x500
 do_sys_open+0x5e/0xa0
 __x64_sys_openat+0x28/0x40

Previously, f2fs tries to catch data inconcistency exception in between
SSA and SIT table during GC, however once the exception is caught, it will
call f2fs_bug_on to hang kernel, it's not needed, instead, let's set
SBI_NEED_FSCK flag and skip migrating current block.

Fixes: bbf9f7d90f21 ("f2fs: Fix indefinite loop in f2fs_gc()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix remove page failed in invalidate compress pages

commit d1917865a7906baf6b687e15e8e6195a295a3992 upstream.

Since compress inode not a regular file, generic_error_remove_page in
f2fs_invalidate_compress_pages will always be failed, set compress
inode as a regular file to fix it.

Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Remove unused compile options

commit 50ca8cc7c0fdd9ab16b8b66ffb301fface101fac upstream.

Before the driver had screen targets support we had to disable explicit
bringup of its infrastructure because it was breaking screen objects
support.
Since the implementation of screen targets landed there hasn't been a
reason to explicitly disable it and the options were never used.
Remove of all that unused code.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-3-zack@kde.org
(cherry picked from commit 11343099d5ae6c7411da1425b6b162c89fb5bf10)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Remove explicit transparent hugepages support

commit bc701a28c74e78d7b5aa2b8628cb3608d4785d14 upstream.

Old versions of the svga device used to export virtual vram, handling of
which was optimized on top of transparent hugepages support. Only very
old devices (OpenGL 2.1 support and earlier) used this code and at this
point performance differences are negligible.

Because the code requires very old hardware versions to run it has
been largely untested and unused for a long time.

Furthermore removal of the ttm hugepages support in:
commit 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
broke the coherency mode in vmwgfx when running with hugepages.

Fixes: 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-2-zack@kde.org
(cherry picked from commit 49d535d64d52945e2c874f380705675e20a02b6a)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: dts: microchip: mpfs: Drop empty chosen node

commit 53ef07326ad0d6ae7fefded22bc53b427d542761 upstream.

It does not make sense to have an (empty) chosen node in an SoC-specific
.dtsi, as chosen is meant for system-specific configuration.
It is already provided in microchip-mpfs-icicle-kit.dts anyway.

Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries

commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream.

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module

commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream.

As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.

Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/fsl: xgmac_mdio: Add workaround for erratum A-009885

commit 6198c722019774d38018457a8bfb9ba3ed8c931e upstream.

Once an MDIO read transaction is initiated, we must read back the data
register within 16 MDC cycles after the transaction completes. Outside
of this window, reads may return corrupt data.

Therefore, disable local interrupts in the critical section, to
maximize the probability that we can satisfy this requirement.

Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: Don't accidentally set RTO_ONLINK before mlx5e_route_lookup_ipv4_get()

commit 48d67543e01d73292e0bb66d3f10fc422e79e031 upstream.

Mask the ECN bits before calling mlx5e_route_lookup_ipv4_get(). The
tunnel key might have the last ECN bit set. This interferes with the
route lookup process as ip_route_output_key_hash() interpretes this bit
specially (to restrict the route scope).

Found by code inspection, compile tested only.

Fixes: c7b9038d8af6 ("net/mlx5e: TC preparation refactoring for routing update event")
Fixes: 9a941117fb76 ("net/mlx5e: Maximize ip tunnel key usage on the TC offloading path")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: avoid quadratic behavior in netns dismantle

commit d07418afea8f1d9896aaf9dc5ae47ac4f45b220c upstream.

net/ipv4/fib_semantics.c uses an hash table of 256 slots,
keyed by device ifindexes: fib_info_devhash[DEVINDEX_HASHSIZE]

Problem is that with network namespaces, devices tend
to use the same ifindex.

lo device for instance has a fixed ifindex of one,
for all network namespaces.

This means that hosts with thousands of netns spend
a lot of time looking at some hash buckets with thousands
of elements, notably at netns dismantle.

Simply add a per netns perturbation (net_hash_mix())
to spread elements more uniformely.

Also change fib_devindex_hashfn() to use more entropy.

Fixes: aa79e66eee5d ("net: Make ifindex generation per-net namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: update fib_info_cnt under spinlock protection

commit 0a6e6b3c7db6c34e3d149f09cd714972f8753e3f upstream.

In the past, free_fib_info() was supposed to be called
under RTNL protection.

This eventually was no longer the case.

Instead of enforcing RTNL it seems we simply can
move fib_info_cnt changes to occur when fib_info_lock
is held.

v2: David Laight suggested to update fib_info_cnt
only when an entry is added/deleted to/from the hash table,
as fib_info_cnt is used to make sure hash table size
is optimal.

BUG: KCSAN: data-race in fib_create_info / free_fib_info

write to 0xffffffff86e243a0 of 4 bytes by task 26429 on cpu 0:
 fib_create_info+0xe78/0x3440 net/ipv4/fib_semantics.c:1428
 fib_table_insert+0x148/0x10c0 net/ipv4/fib_trie.c:1224
 fib_magic+0x195/0x1e0 net/ipv4/fib_frontend.c:1087
 fib_add_ifaddr+0xd0/0x2e0 net/ipv4/fib_frontend.c:1109
 fib_netdev_event+0x178/0x510 net/ipv4/fib_frontend.c:1466
 notifier_call_chain kernel/notifier.c:83 [inline]
 raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:391
 __dev_notify_flags+0x1d3/0x3b0
 dev_change_flags+0xa2/0xc0 net/core/dev.c:8872
 do_setlink+0x810/0x2410 net/core/rtnetlink.c:2719
 rtnl_group_changelink net/core/rtnetlink.c:3242 [inline]
 __rtnl_newlink net/core/rtnetlink.c:3396 [inline]
 rtnl_newlink+0xb10/0x13b0 net/core/rtnetlink.c:3506
 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2496
 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x726/0x840 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmsg+0x195/0x230 net/socket.c:2492
 __do_sys_sendmsg net/socket.c:2501 [inline]
 __se_sys_sendmsg net/socket.c:2499 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffffffff86e243a0 of 4 bytes by task 31505 on cpu 1:
 free_fib_info+0x35/0x80 net/ipv4/fib_semantics.c:252
 fib_info_put include/net/ip_fib.h:575 [inline]
 nsim_fib4_rt_destroy drivers/net/netdevsim/fib.c:294 [inline]
 nsim_fib4_rt_replace drivers/net/netdevsim/fib.c:403 [inline]
 nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:431 [inline]
 nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
 nsim_fib_event_work+0x15ca/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
 process_scheduled_works kernel/workqueue.c:2361 [inline]
 worker_thread+0x7df/0xa70 kernel/workqueue.c:2447
 kthread+0x2c7/0x2e0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30

value changed: 0x00000d2d -> 0x00000d2e

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 31505 Comm: kworker/1:21 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf evsel: Override attr->sample_period for non-libpfm4 events

commit 3606c0e1a1050d397ad759a62607e419fd8b0ccb upstream.

A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.

Before said patch:

  perf record -c 10000 -e arm_spe_0// -- sleep 1

Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.

This patch restores the previous behaviour for non-libpfm4 events.

Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Mark PTR_TO_FUNC register initially with zero offset

commit d400a6cf1c8a57cdf10f35220ead3284320d85ff upstream.

Similar as with other pointer types where we use ldimm64, clear the register
content to zero first, and then populate the PTR_TO_FUNC type and subprogno
number. Currently this is not done, and leads to reuse of stale register
tracking data.

Given for special ldimm64 cases we always clear the register offset, make it
common for all cases, so it won't be forgotten in future.

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix mount source show for bpffs

commit 1e9d74660d4df625b0889e77018f9e94727ceacd upstream.

We noticed our tc ebpf tools can't start after we upgrade our in-house kernel
version from 4.19 to 5.10. That is because of the behaviour change in bpffs
caused by commit d2935de7e4fd ("vfs: Convert bpf to use the new mount API").

In our tc ebpf tools, we do strict environment check. If the environment is
not matched, we won't allow to start the ebpf progs. One of the check is whether
bpffs is properly mounted. The mount information of bpffs in kernel-4.19 and
kernel-5.10 are as follows:

- kernel 4.19
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)

- kernel 5.10
$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
none on /sys/fs/bpf type bpf (rw,relatime)

The device name in kernel-5.10 is displayed as none instead of bpffs, then our
environment check fails. Currently we modify the tools to adopt to the kernel
behaviour change, but I think we'd better change the kernel code to keep the
behavior consistent.

After this change, the mount information will be displayed the same with the
behavior in kernel-4.19, for example:

$ mount -t bpf bpffs /sys/fs/bpf
$ mount -t bpf
bpffs on /sys/fs/bpf type bpf (rw,relatime)

Fixes: d2935de7e4fd ("vfs: Convert bpf to use the new mount API")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/bpf/20220108134623.32467-1-laoar.shao@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xdp: check prog type before updating BPF link

commit 382778edc8262b7535f00523e9eb22edba1b9816 upstream.

The bpf_xdp_link_update() function didn't check the program type before
updating the program, which made it possible to install any program type as
an XDP program, which is obviously not good. Syzbot managed to trigger this
by swapping in an LWT program on the XDP hook which would crash in a helper
call.

Fix this by adding a check and bailing out if the types don't match.

Fixes: 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by: syzbot+983941aa85af6ded1fd9@syzkaller.appspotmail.com
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Fix indent in option lists in the documentation

commit 986dec18bbf41f50edc2e0aa4ac5ef8e0f64f328 upstream.

Mixed indentation levels in the lists of options in bpftool's
documentation produces some unexpected results. For the "bpftool" man
page, it prints a warning:

    $ make -C bpftool.8
      GEN     bpftool.8
    <stdin>:26: (ERROR/3) Unexpected indentation.

For other pages, there is no warning, but it results in a line break
appearing in the option lists in the generated man pages.

RST paragraphs should have a uniform indentation level. Let's fix it.

Fixes: c07ba629df97 ("tools: bpftool: Update and synchronise option list in doc and help msg")
Fixes: 8cc8c6357c8f ("tools: bpftool: Document and add bash completion for -L, -B options")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-5-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Remove inclusion of utilities.mak from Makefiles

commit 48f5aef4c458c19ab337eed8c95a6486cc014aa3 upstream.

Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-3-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>