Adam Litke [Tue, 26 Jan 2010 20:17:35 +0000 (14:17 -0600)]
virtio: Add memory statistics reporting to the balloon driver
When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests. The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval. The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure. This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host. A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adam Litke [Mon, 25 Jan 2010 18:18:44 +0000 (12:18 -0600)]
New API for asynchronous monitor commands
Qemu has a number of commands that can operate asynchronously (savevm, migrate,
etc) and it will be getting more. For these commands, the user monitor needs
to be suspended, but QMP monitors could continue to to accept other commands.
This patch introduces a new command API that isolates the details of handling
different monitor types from the actual command execution.
A monitor command can use this API by implementing the mhandler.cmd_async
handler (or info_async if appropriate). This function is responsible for
submitting the command and does not return any data although it may raise
errors. When the command completes, the QMPCompletion callback should be
invoked with its opaque data and the command result.
The process for submitting and completing an asynchronous command is different
for QMP and user monitors. A user monitor must be suspended at submit time and
resumed at completion time. The user_print() function must be passed to the
QMPCompletion callback so the result can be displayed properly. QMP monitors
are simpler. No submit time setup is required. When the command completes,
monitor_protocol_emitter() writes the result in JSON format.
This API can also be used to implement synchronous commands. In this case, the
cmd_async handler should immediately call the QMPCompletion callback. It is my
hope that this new interface will work for all commands, leading to a
drastically simplified monitor.c once all commands are ported.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Tue, 26 Jan 2010 13:49:08 +0000 (14:49 +0100)]
block: avoid creating too large iovecs in multiwrite_merge
If we go over the maximum number of iovecs support by syscall we get
back EINVAL from the kernel which translate to I/O errors for the guest.
Add a MAX_IOV defintion for platforms that don't have it. For now we use
the same 1024 define that's used on Linux and various other platforms,
but until the windows block backend implements some kind of vectored I/O
it doesn't matter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefano Stabellini [Mon, 25 Jan 2010 12:54:57 +0000 (12:54 +0000)]
vnc_refresh: calling vnc_update_client might free vs
Hi all,
this patch fixes another bug in vnc_refresh: calling vnc_update_client
might cause vs to be free()ed, in this case we cannot access vs->next
right after to examine the next item on the list.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Fri, 22 Jan 2010 13:26:38 +0000 (14:26 +0100)]
block/raw-posix: Abort on pread beyond end of non-growable file
This shouldn't happen under any normal circumstances. However, it looks like
it's possible to achieve this with corrupted images. Without this patch
raw_pread is hanging in an endless loop in such cases.
The patch is not affecting growable files, for which such reads happen in
normal use cases. raw_pread_aligned already handles these cases and won't
return zero in the first place.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Herve Poussineau [Sun, 24 Jan 2010 21:23:56 +0000 (21:23 +0000)]
win32: pair qemu_memalign() with qemu_vfree()
Win32 suffers from a very big memory leak when dealing with SCSI devices.
Each read/write request allocates memory with qemu_memalign (ie
VirtualAlloc) but frees it with qemu_free (ie free).
Pair all qemu_memalign() calls with qemu_vfree() to prevent such leaks.
Signed-off-by: Herve Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Herve Poussineau [Sun, 24 Jan 2010 21:18:36 +0000 (21:18 +0000)]
win32/sdl: Fix toggle full screen
Toggle full screen on Win32/SDL 1.2.13 was broken by commit
c18a2c360e3100bbd71162cf922dcd8c429a8b71. Re-add the call to
do_sdl_resize() which was removed in this revision
Signed-off-by: Herve Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Thu, 21 Jan 2010 21:24:58 +0000 (22:24 +0100)]
Tell users about out-of-memory errors
Aborting without an error message when memory is short
is not helpful, so print the reason for the abort.
Try
qemu -m 1000000
or
qemu -m 2000 (win32)
to force an out-of-memory error.
v2:
* Fix error message for win32.
* Fix error message for posix_memalign.
Thanks to malc for the hints.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Tue, 26 Jan 2010 21:59:57 +0000 (21:59 +0000)]
PCI: fix bridge configuration
PCI bridges' qdev info structures must indicate bridge header type,
otherwise critical bridge registers (esp. PCI_PRIMARY_BUS,
PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Marcelo Tosatti [Wed, 20 Jan 2010 16:26:34 +0000 (14:26 -0200)]
fix savevm command without id or tag
savevm without id or tag segfaults in:
(gdb) bt
#0 0x00007f600a83bf8a in __strcmp_sse42 () from /lib64/libc.so.6
#1 0x00000000004745b6 in bdrv_snapshot_find (bs=<value optimized out>,
sn_info=0x7fff996be280, name=0x0) at savevm.c:1631
#2 0x0000000000475c80 in del_existing_snapshots (name=<value optimized out>,
mon=<value optimized out>) at savevm.c:1654
#3 do_savevm (name=<value optimized out>, mon=<value optimized out>)
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Thu, 21 Jan 2010 15:12:09 +0000 (16:12 +0100)]
qcow2: rename two QCowAIOCB members
The n member is not very descriptive and very hard to grep, rename it to
cur_nr_sectors to better indicate what it is used for. Also rename
nb_sectors to remaining_sectors as that is what it is used for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Wed, 20 Jan 2010 17:13:42 +0000 (18:13 +0100)]
block: kill BDRV_O_CREAT
The BDRV_O_CREAT option is unused inside qemu and partially duplicates
the bdrv_create method. Remove it, and the -C option to qemu-io which
isn't used in qemu-iotests anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Wed, 20 Jan 2010 17:13:25 +0000 (18:13 +0100)]
block: clean up bdrv_open2 structure a bit
Check the whitelist as early as possible instead of continuing the
setup, and move all the error handling code to the end of the
function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Thu, 21 Jan 2010 10:49:23 +0000 (16:19 +0530)]
virtio-console: Automatically use virtio-serial-bus for the older -virtioconsole invocation
These hunks got dropped off mysteriously during the rebasing of my
virtio-serial series. Thanks go to Markus for noticing it.
Without these fixes, -virtioconsole doesn't actually have any effect.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Thu, 21 Jan 2010 10:13:26 +0000 (15:43 +0530)]
virtio-console: Rename virtio-serial.c back to virtio-console.c
This file was renamed to ease the reviews of the recent changes
that went in.
Now that the changes are done, rename the file back to its original
name.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Wed, 20 Jan 2010 19:54:18 +0000 (20:54 +0100)]
Fix generation of config-host.h
This patch improves Anthony patch
a6a853c86275efd89996ce59612a000c5873db5d
Once there, it improves handling of object files for qemu tools
cc: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Marcelo Tosatti [Wed, 20 Jan 2010 17:01:49 +0000 (18:01 +0100)]
ide save/restore current transfer fields
If migration takes place between write of the bmdma address register and
write of the command register (to initiate DMA), the destination will
not properly start the DMA op, hanging the guest:
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd c8/00:16:41:00:00/00:00:00:00:00/e0 tag 0 dma 11264 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
Fix by sending current transfer information in the migration data.
We need to update ide version to 4 for this to work. As we don't
have subsectios, we need to chain the update increase until
vmstate_ide_pci (quintela)
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 21 Jan 2010 21:15:41 +0000 (19:15 -0200)]
PCI: do_pci_info(): PCI bridge devices support
This commit completes the do_pci_info() conversion to
QObject by adding support to PCI bridge devices.
This is done by recursively adding devices in the
"pci_bridge" key.
IMPORTANT: This code is being added separately because I could
NOT test it properly. According to Michael Tsirkin, it depends
on ultrasparc and it would take time to do the proper setup.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 21 Jan 2010 21:15:40 +0000 (19:15 -0200)]
PCI: Convert pci_info() to QObject
The returned QObject is a QList of all buses. Each bus is
represented by a QDict, which has a key with a QList of all
PCI devices attached to it. Each device is represented by
a QDict.
As has happended to other complex conversions, it's hard to
split this commit as part of it are new functions which are
called by each other.
IMPORTANT: support for printing PCI bridge attached devices
is NOT part of this commit, it's going to be added by the
next commit, as it's untested.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 21 Jan 2010 21:15:39 +0000 (19:15 -0200)]
QDict: Introduce qdict_get_qdict()
A helper to retrieve a QDict from a QDict.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 21 Jan 2010 21:15:38 +0000 (19:15 -0200)]
QList: Introduce QLIST_FOREACH_ENTRY()
Iterate over QList entries, it's needed to call qlist_entry_obj()
to retrieve the stored QObject.
I'm not sure if it's ok to have this, because it's not as easy as
qlist_iter() and the QListEntry data type is now exposed to the
users, which means we have one more struct to be maintained when
we have libqmp.
Adding anyway, as it's more compact and people are asking for it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Thu, 21 Jan 2010 12:40:41 +0000 (14:40 +0200)]
Read-only device changed to opens it's file for read-only.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Thu, 21 Jan 2010 12:40:39 +0000 (14:40 +0200)]
Ask for read-write permissions when opening files
Found some places that seems needs this explicitly, now that
read-write is not the default.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Thu, 21 Jan 2010 12:40:37 +0000 (14:40 +0200)]
No need anymoe for bdrv_set_read_only
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Wed, 20 Jan 2010 21:25:27 +0000 (22:25 +0100)]
Documentation: Add missing texi description for command line options
Some more command line options had entries for command line help,
but documentation for texi and derived formats (man, html, info)
was missing.
For conditional options, the texi documentation was added
unconditionally.
This seems reasonable because typically man pages are
shared, and html users expect to see one documentation
(not several nearly identical documents for the different
systems).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Wed, 20 Jan 2010 21:58:35 +0000 (22:58 +0100)]
Documentation: Improve command line help for -device option
* Fix column for help text.
* Give some more help, especially for the new '?' parameters.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Wed, 20 Jan 2010 21:58:34 +0000 (22:58 +0100)]
qdev: Add help for property value
When called with property value "?",
a help text will be printed (instead of an error message).
This is useful for command lines like
qemu -device e1000,mac=?
and is already standard for other command line options.
A better help text could be provided by extending
the Property structure with a desc field.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Wed, 20 Jan 2010 21:58:33 +0000 (22:58 +0100)]
qdev: Add help for device properties
When called with property "?", a list of supported
properties will be printed (instead of an error message).
This is useful for command lines like
qemu -device e1000,?
and was already standard for other options like model=?
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 19 Jan 2010 23:56:24 +0000 (00:56 +0100)]
mmap_frag() users only check for -1 error
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 19 Jan 2010 23:56:23 +0000 (00:56 +0100)]
Check availavility of -fstack-protector-all
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:22 +0000 (00:56 +0100)]
Enable _FORTIFY_SOURCE=2
_FORTIFY_SOURCE is a Glibc feature which adds memory and string function
protection.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 19 Jan 2010 23:56:21 +0000 (00:56 +0100)]
check pipe() return value
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:20 +0000 (00:56 +0100)]
linux-user/mmap.c: fix warnings with _FORTIFY_SOURCE
CC i386-linux-user/mmap.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'mmap_frag':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:253: error: ignoring return value of 'pread', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'target_mmap':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:477: error: ignoring return value of 'pread', declared with attribute warn_unused_result
make[1]: *** [mmap.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:19 +0000 (00:56 +0100)]
monitor.c: fix warnings with _FORTIFY_SOURCE
CC i386-softmmu/monitor.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
make[1]: *** [monitor.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:18 +0000 (00:56 +0100)]
vl.c: fix warning with _FORTIFY_SOURCE
CC i386-softmmu/vl.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'qemu_event_increment':
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:3404: error: ignoring return value of 'write', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'main':
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:5774: error: ignoring return value of 'write', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6064: error: ignoring return value of 'chdir', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6083: error: ignoring return value of 'chdir', declared with attribute warn_unused_result
make[1]: *** [vl.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:17 +0000 (00:56 +0100)]
usb-linux.c: fix warning with _FORTIFY_SOURCE
CC usb-linux.o
cc1: warnings being treated as errors
usb-linux.c: In function 'usb_host_read_file':
usb-linux.c:1204: error: ignoring return value of 'fgets', declared with attribute warn_unused_result
make: *** [usb-linux.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:16 +0000 (00:56 +0100)]
net/slirp.c: fix warning with _FORTIFY_SOURCE
CC net/slirp.o
cc1: warnings being treated as errors
net/slirp.c: In function 'slirp_smb_cleanup':
net/slirp.c:470: error: ignoring return value of 'system', declared with attribute warn_unused_result
make: *** [net/slirp.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:15 +0000 (00:56 +0100)]
block/qcow2.c: fix warnings with _FORTIFY_SOURCE
CC block/qcow2.o
cc1: warnings being treated as errors
block/qcow2.c: In function 'qcow_create2':
block/qcow2.c:829: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:838: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:839: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:841: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:844: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:849: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:852: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:855: error: ignoring return value of 'write', declared with attribute warn_unused_result
make: *** [block/qcow2.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:14 +0000 (00:56 +0100)]
block/vvfat.c: fix warnings with _FORTIFY_SOURCE
CC block/vvfat.o
cc1: warnings being treated as errors
block/vvfat.c: In function 'commit_one_file':
block/vvfat.c:2259: error: ignoring return value of 'ftruncate', declared with attribute warn_unused_result
make: *** [block/vvfat.o] Error 1
CC block/vvfat.o
In file included from /usr/include/stdio.h:912,
from ./qemu-common.h:19,
from block/vvfat.c:27:
In function 'snprintf',
inlined from 'init_directories' at block/vvfat.c:871,
inlined from 'vvfat_open' at block/vvfat.c:1068:
/usr/include/bits/stdio2.h:65: error: call to __builtin___snprintf_chk will always overflow destination buffer
make: *** [block/vvfat.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:13 +0000 (00:56 +0100)]
block/vmdk.o: fix warnings with _FORTIFY_SOURCE
CC block/vmdk.o
cc1: warnings being treated as errors
block/vmdk.c: In function 'vmdk_snapshot_create':
block/vmdk.c:236: error: ignoring return value of 'ftruncate', declared with attribute warn_unused_result
block/vmdk.c: In function 'vmdk_create':
block/vmdk.c:775: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/vmdk.c:776: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/vmdk.c:778: error: ignoring return value of 'ftruncate', declared with attribute warn_unused_result
block/vmdk.c:784: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/vmdk.c:790: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/vmdk.c:807: error: ignoring return value of 'write', declared with attribute warn_unused_result
make: *** [block/vmdk.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:12 +0000 (00:56 +0100)]
block/qcow.c: fix warnings with _FORTIFY_SOURCE
CC block/qcow.o
cc1: warnings being treated as errors
block/qcow.c: In function 'qcow_create':
block/qcow.c:804: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow.c:806: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow.c:811: error: ignoring return value of 'write', declared with attribute warn_unused_result
make: *** [block/qcow.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:11 +0000 (00:56 +0100)]
block/cow.c: fix warnings with _FORTIFY_SOURCE
CC block/cow.o
cc1: warnings being treated as errors
block/cow.c: In function 'cow_create':
block/cow.c:251: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/cow.c:253: error: ignoring return value of 'ftruncate', declared with attribute warn_unused_result
make: *** [block/cow.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:10 +0000 (00:56 +0100)]
posix-aio-compat.c: fix warning with _FORTIFY_SOURCE
CC posix-aio-compat.o
cc1: warnings being treated as errors
posix-aio-compat.c: In function 'aio_signal_handler':
posix-aio-compat.c:505: error: ignoring return value of 'write', declared with attribute warn_unused_result
make: *** [posix-aio-compat.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 19 Jan 2010 23:56:09 +0000 (00:56 +0100)]
force to test result for qemu_write_full()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kirill A. Shutemov [Tue, 19 Jan 2010 23:56:08 +0000 (00:56 +0100)]
Introduce qemu_write_full()
A variant of write(2) which handles partial write.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:04:01 +0000 (15:04 +0100)]
qcow2: Don't ignore qcow2_alloc_clusters return value
Now that qcow2_alloc_clusters can return error codes, we must handle them in
the callers of qcow2_alloc_clusters.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:03:06 +0000 (15:03 +0100)]
qcow2: Don't ignore update_refcount return value
update_refcount can return errors that need to be handled by the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:03:05 +0000 (15:03 +0100)]
qcow2: Allow updating no refcounts
There's absolutely no problem with updating the refcounts of 0 clusters.
At least snapshot code is doing this and would fail once the result of
update_refcount isn't ignored any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:03:04 +0000 (15:03 +0100)]
qcow2: Improve error handling in update_refcount
If update_refcount fails, try to undo any changes made so far to avoid
inconsistencies in the image file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:03:03 +0000 (15:03 +0100)]
qcow2: Fix error handling in grow_refcount_table
Return the appropriate error code instead of -EIO.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:03:02 +0000 (15:03 +0100)]
block: Return original error codes in bdrv_pread/write
Don't assume -EIO but return the real error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:03:01 +0000 (15:03 +0100)]
qcow2: Return 0/-errno in qcow2_alloc_cluster_offset
Returning 0/-errno allows it to distingush different errors classes. The
cluster offset of newly allocated clusters is now returned in the QCowL2Meta
struct.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:03:00 +0000 (15:03 +0100)]
qcow2: Return 0/-errno in get_cluster_table
Switching to 0/-errno allows it to distinguish different error cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:02:59 +0000 (15:02 +0100)]
qcow2: Fix error handling in qcow_save_vmstate
Don't assume success but pass the bdrv_pwrite return value on.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 20 Jan 2010 14:02:58 +0000 (15:02 +0100)]
qcow2: Fix error handling in qcow2_grow_l1_table
Return the appropriate error value instead of always using EIO. Don't free the
L1 table on errors, we still need it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 20 Jan 2010 12:07:35 +0000 (13:07 +0100)]
monitor: convert do_cpu_set() to QObject, QError
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 20 Jan 2010 12:07:34 +0000 (13:07 +0100)]
QError: New QERR_INVALID_CPU_INDEX
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 20 Jan 2010 12:07:33 +0000 (13:07 +0100)]
monitor: convert do_physical_memory_save() to QError
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 20 Jan 2010 12:07:32 +0000 (13:07 +0100)]
monitor: convert do_memory_save() to QError
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 20 Jan 2010 12:07:31 +0000 (13:07 +0100)]
QError: New QERR_OPEN_FILE_FAILED
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Wed, 20 Jan 2010 12:07:30 +0000 (13:07 +0100)]
monitor: Don't check for mon_get_cpu() failure
mon_get_cpu() can't return null pointer, because it passes its return
value to cpu_synchronize_state() first, which crashes if its argument
is null.
Remove the (pretty cheesy) handling of this non-existing error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 25 Jan 2010 14:56:53 +0000 (08:56 -0600)]
json: escape u0000 .. u001F when outputting json
Markus Armbruster pointed out:
JSON requires control characters in strings to be escaped. RFC 4627
section 2.5:
A string begins and ends with quotation marks. All Unicode
characters may be placed within the quotation marks except for the
characters that must be escaped: quotation mark, reverse solidus, and
the control characters (U+0000 through U+001F).
We've been quoting the special escape sequences that JSON defines but we
haven't been encoding the full control character range. This patch fixes that.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Sun, 24 Jan 2010 21:18:00 +0000 (21:18 +0000)]
Sparc64: fix initrd
Fix HdrS offsets for Sparc64. The initrd address must be offset by
KERNBASE.
Use rom_ptr mechanism to actually write to the kernel image.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Edgar E. Iglesias [Sun, 24 Jan 2010 18:28:55 +0000 (19:28 +0100)]
pflash: Dont open memarea for full IO if already done.
When wcycle is non zero the area is already opened for readable IO.
Avoiding the re-registration of the memarea significantly speeds up
the flash emulation. In particular for flashes connected through 8 or
16-bit buses.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Edgar E. Iglesias [Sun, 24 Jan 2010 17:39:51 +0000 (18:39 +0100)]
pflash: Reduce writebuf len for 8-bit flashes.
Flashes connected through an 8 bit bus cannot handle write buffers
larger than 256 bytes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Edgar E. Iglesias [Sun, 24 Jan 2010 16:19:19 +0000 (17:19 +0100)]
pflash: Remove dead code, no functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Edgar E. Iglesias [Sun, 24 Jan 2010 16:15:05 +0000 (17:15 +0100)]
microblaze: The petalogix s3adsp board uses intel flashes
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Anthony Liguori [Thu, 21 Jan 2010 16:57:58 +0000 (10:57 -0600)]
Load global config files by default
A new option, -nodefconfig is introduced to prevent loading from the default
config location. Otherwise, two configuration files will be searched for,
qemu.conf and target-<TARGET_NAME>.conf.
To ensure that the default configuration is overridden by a user specified
config, we introduce a two stage option parsing mechanism.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 22 Jan 2010 15:18:06 +0000 (09:18 -0600)]
Move out option lookup into a separate function
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 21 Jan 2010 16:30:29 +0000 (10:30 -0600)]
Support --sysconfdir in configure to specify path to configuration files
The default value is ${prefix}/etc/qemu. --sysconfdir can be used to override
the default to an absolute path. The expectation is that when installed to
/usr, --sysconfdir=/etc/qemu will be used.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Sun, 24 Jan 2010 14:28:21 +0000 (14:28 +0000)]
Sparc32: fix free-run timer
According to Sun4M System Architecture Manual chapter 5.3.2, a limit
of 0 will not generate interrupts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Jan Kiszka [Sun, 24 Jan 2010 08:51:49 +0000 (09:51 +0100)]
Musicpal: Fix descriptor walk in eth_send
Commit
930c86820e introduced a regression to eth_send: eth_tx_desc_put
manipulates the host's tx descriptor copy before writing it back, but
two lines down the descriptor is evaluated again, leaving us with an
invalid next address if host and guest endianness differ. So this was
the actual issue commit
2e87c5b937 tried to paper over.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: malc <av1474@comtv.ru>
Jan Kiszka [Sat, 23 Jan 2010 17:51:22 +0000 (18:51 +0100)]
Musicpal: Fix wm8750 I2C address
Commit
b3a219883e uncovered that we attached the Wolfson with an I2C
address shifted left by one. Fixing this makes sound work again for
the Musicpal.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: malc <av1474@comtv.ru>
Artyom Tarasenko [Fri, 22 Jan 2010 21:31:53 +0000 (22:31 +0100)]
sparc32 fix np dereference in do_unassigned_access
fix a potential null pointer dereference introduced in
commit
576c2cdc767ab9e2dc038fa4c99f22e53287a3de
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 22 Jan 2010 18:39:49 +0000 (18:39 +0000)]
Sparc64: fix PCI probe problems
Byte swap PCI config values.
Remove old bogus PCI config mechanism so that device 0:0.0 can be probed.
This requires OpenBIOS r667.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Wed, 20 Jan 2010 16:12:23 +0000 (10:12 -0600)]
Revert "block: prevent multiwrite_merge from creating too large iovecs"
This reverts commit
0076bc0c1d93adcbc7f1af184e04902cf37e9ab8.
Kevin Wolf pointed out that this breaks the mingw32 build.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 20 Jan 2010 16:09:35 +0000 (10:09 -0600)]
make: qemu-img depends on config-host.h
Fixes mingw32 build out of tree.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gleb Natapov [Wed, 20 Jan 2010 13:37:33 +0000 (15:37 +0200)]
reduce number of reinjects on ACK
Windows 7 BSODs under load with HAL_RTC_IRQF_WILL_NOT_CLEAR error.
It happens here:
hal!HalpRtcUnmaskClock:
8281b93a 8bff mov edi,edi
8281b93c 56 push esi
8281b93d 33f6 xor esi,esi
8281b93f 6a0c push 0Ch
8281b941 e8b2ffffff call hal!CMOS_READ (
8281b8f8)
8281b946 84c0 test al,al
8281b948 7920 jns hal!HalpRtcUnmaskClock+0x30 (
8281b96a)
8281b94a 6a0a push 0Ah
8281b94c 46 inc esi
8281b94d e854c8ffff call hal!KeStallExecutionProcessor (
828181a6)
8281b952 83fe64 cmp esi,64h
8281b955 72e8 jb hal!HalpRtcUnmaskClock+0x5 (
8281b93f)
8281b957 6a00 push 0
8281b959 6a00 push 0
8281b95b 6a00 push 0
8281b95d 680a010000 push 10Ah
8281b962 6a5c push 5Ch
8281b964 ff1500c38082 call dword ptr [hal!_imp__KeBugCheckEx (
8280c300)]
8281b96a 5e pop esi
8281b96b c3 ret
So it loops for 100(64h) times reading register C before BSOD. Lets
reduce number of immediate reinjection well under this limit.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Tue, 19 Jan 2010 21:15:39 +0000 (22:15 +0100)]
block: prevent multiwrite_merge from creating too large iovecs
If we go over the maximum number of iovecs support by syscall we get
back EINVAL from the kernel which translate to I/O errors for the guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Sun, 17 Jan 2010 11:32:30 +0000 (12:32 +0100)]
block: fix cache flushing in bdrv_commit
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 12:37:59 +0000 (10:37 -0200)]
QMP: Fix asynchronous events delivery
Commit
f039a563f200beee80cc10fd70b21ea396979dab introduces
a regression as monitor_protocol_event() will return in
the first user Monitor it finds in the QLIST_FOREACH()
loop.
The right thing to do is to only delivery an asynchronous
event if the 'mon' is a QMP Monitor.
The aforementioned commit was an early version, if it was
applied to stable (it should) this one has to be applied
there too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 13:42:40 +0000 (11:42 -0200)]
vnc: Use inet_strfamily()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 13:42:39 +0000 (11:42 -0200)]
net: inet_strfamily(): Better unknown family report
Returning "????" is a bit meaningless, let's call it "unknown".
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 13:42:38 +0000 (11:42 -0200)]
net: Make inet_strfamily() public
So that it can be used by other subsystems.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:58 +0000 (00:36 +0530)]
virtio-serial: Use MSI vectors for port virtqueues
This commit enables the use of MSI interrupts for virtqueue
notifications for ports. We use nr_ports + 1 (for control channel) msi
entries for the ports, as only the in_vq operations need an interrupt on
the guest.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:57 +0000 (00:36 +0530)]
Move virtio-serial to Makefile.objs
There's nothing target-dependent in the virtio-serial code so allow it
to be compiled just once for all the targets.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:56 +0000 (00:36 +0530)]
virtio-serial: Add a 'virtserialport' device for generic serial port support
This commit adds a simple chardev-based serial port. Any data the guest
sends is forwarded to the chardev and vice-versa.
Sample uses for such a device can be obtaining info from the guest like
the file systems used, apps installed, etc. for offline usage and
logged-in users, clipboard copy-paste, etc. for online usage.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:55 +0000 (00:36 +0530)]
virtio-serial-bus: Add ability to hot-unplug ports
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:54 +0000 (00:36 +0530)]
virtio-serial-bus: Add a port 'name' property for port discovery in guests
The port 'id' or number is internal state between the guest kernel and
our bus implementation. This is invocation-dependent and isn't part of
the guest-host ABI.
To correcly enumerate and map ports between the host and the guest, the
'name' property is used.
Example:
-device virtserialport,name=org.qemu.port.0
This invocation will get us a char device in the guest at:
/dev/virtio-ports/org.qemu.port.0
which can be a symlink to
/dev/vport0p3
This 'name' property is exposed by the guest kernel in a sysfs
attribute:
/sys/kernel/virtio-ports/vport0p3/name
A simple udev script can pick up this name and create the symlink
mentioned above.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:53 +0000 (00:36 +0530)]
virtio-serial-bus: Maintain guest and host port open/close state
Via control channel messages, the guest can tell us whether a port got
opened or closed. Similarly, we can also indicate to the guest of host
port open/close events.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:52 +0000 (00:36 +0530)]
virtio-console: qdev conversion, new virtio-serial-bus
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.
The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.
This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.
As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using
-virtioconsole ...
is maintained, but the new, preferred way is to use
-device virtio-serial -device virtconsole,chardev=...
With this commit, multiple devices as well as multiple ports with a
single device can be supported.
For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.
In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.
This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:51 +0000 (00:36 +0530)]
virtio: Remove duplicate macro definition for max. virtqueues, bump up the max
VIRTIO_PCI_QUEUE_MAX is redefined in hw/virtio.c. Let's just keep it in
hw/virtio.h.
Also, bump up the value of the maximum allowed virtqueues to 64. This is
in preparation to allow multiple ports per virtio-console device.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:15 +0000 (16:48 +0200)]
Disable fall-back to read-only when cannot open drive's file for read-write
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:14 +0000 (16:48 +0200)]
Added drives' readonly option
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:13 +0000 (16:48 +0200)]
Clean-up a little bit the RW related bits of BDRV_O_FLAGS. BDRV_O_RDONLY gone (and so is BDRV_O_ACCESS). Default value for bdrv_flags (0/zero) is READ-ONLY. Need to explicitly request READ-WRITE.
Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:12 +0000 (16:48 +0200)]
Make CDROM a read-only drive
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Sat, 16 Jan 2010 17:19:44 +0000 (18:19 +0100)]
Documentation: Add missing documentation for qdev related command line options
The command line options -device, -nodefaults, -readconfig,
-writeconfig had entries for command line help, but
documentation for texi and derived formats (man, html, info)
was missing.
This also required moving "@end table" to the end of
qemu-options.hx again.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 14 Jan 2010 13:44:14 +0000 (14:44 +0100)]
pc: add driver version compat properties
This patch adds compat property entries for ide-disk.ver and
scsi-disk.ver to pc-0.10 and pc-0.11. With this patch applied
the scsi and ide disks report "0.10" and "0.11" as version when
you start qemu with "-M pc-0.10" or "-M pc-0.11".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 14 Jan 2010 13:44:13 +0000 (14:44 +0100)]
scsi: device version property
This patch adds a new property named 'ver' to scsi-disk which allows to
specify the version which the virtual disk/cdrom should report to the
guest. By default this is the qemu version (i.e. 0.12). usage:
-drive if=none,id=disk,file=...
-device lsi
-device scsi-disk,drive=disk,bus=scsi.0,unit=0,ver=42
You can also switch the version for all scsi drives using:
-global scsi-disk.ver=42
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 14 Jan 2010 13:44:12 +0000 (14:44 +0100)]
ide: device version property
This patch adds a new property named 'ver' to ide-drive which allows to
specify the version which the virtual disk/cdrom should report to the
guest. By default this is the qemu version (i.e. 0.12). usage:
-drive if=none,id=disk,file=...
-device ide-drive,bus=ide.0,unit=0,drive=disk,ver=42
You can also switch the version for all ide drives using:
-global ide-drive.ver=42
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
projects / sdk / emulator / qemu.git / log