Nirbheek Chauhan [Wed, 8 Jun 2022 06:03:22 +0000 (11:33 +0530)]
clock: Use g_atomic_rc_box for refcounting entry clocks
g_atomic_rc_box was added in GLib 2.58, and we require 2.62 now, so we
can fix the FIXME and use this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2568>
Tim-Philipp Müller [Wed, 6 Apr 2022 11:56:30 +0000 (12:56 +0100)]
Bump GLib requirement to >= 2.62
Can't require 2.64 yet because of
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/323
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2568>
Sebastian Dröge [Wed, 8 Jun 2022 07:42:18 +0000 (10:42 +0300)]
decklink: Add support for 4K DCI, 8K/UHD2 and 8K DCI modes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2570>
Seungha Yang [Wed, 1 Jun 2022 21:06:48 +0000 (06:06 +0900)]
qsvencoder: Do not copy if input is D3D11 texture
In case that input is D3D11 texture, QSV seems to work regardless
of the alignment. Actually the alignment requirement seems to make
only sense for system memory.
Other Intel GPU dependent implementations (new VA encoder, and MediaFoundation)
do not require such alignment nor other vendor specific ones (NVENC and AMF)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2540>
Seungha Yang [Thu, 9 Jun 2022 14:19:24 +0000 (23:19 +0900)]
d3d11decoder: Fix for alternate interlacing signalling
Don't set d3d11+interlace caps feature. None of d3d11 elements
support it
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2579>
Seungha Yang [Sat, 4 Jun 2022 13:33:34 +0000 (22:33 +0900)]
d3d11: Add d3d11testsrc element
Adding Direct3D11 based videotestsrc element
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2554>
Mathieu Duponchelle [Wed, 8 Jun 2022 14:38:00 +0000 (16:38 +0200)]
-bad/docs: be more selective about header files to exclude
A few header files in -bad contain comments that start with the
/** gtk-doc pattern, but should not actually be parsed (and warned
about as such).
Previously, we were using far-reaching wildcard patterns to avoid
parsing those, but this had the unintended side effect of also
excluding legitimate files, and creating confusion when comments
were not parsed from those.
Switch to excluding specific files instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2576>
Marc Leeman [Wed, 8 Jun 2022 12:11:57 +0000 (14:11 +0200)]
fix trivial distination -> destination
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2573>
Ignacio Casal Quinteiro [Thu, 21 Apr 2022 10:47:31 +0000 (12:47 +0200)]
osxaudio: remove usage of goto
It is easier to follow the code without the goto now
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
Ignacio Casal Quinteiro [Wed, 30 Mar 2022 10:59:46 +0000 (12:59 +0200)]
osxaudio: support hidden devices
macOS features hidden devices. These are devices that will
not be shown in the macOS UIs and that cannot be retrieved
without having the specific UID of the hidden device. There
are cases when you might want to have a hidden device, for example
when having a virtual speaker that forwards the data to a virtual
hidden input device from which you can then grab the audio.
The blackhole project supports these hidden devices and
this patch provides a way that if the device id is a hidden
device it will use it instead of check the hardware list of devices
to understand if the device is valid.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
Ignacio Casal Quinteiro [Wed, 20 Apr 2022 16:12:02 +0000 (18:12 +0200)]
osx: fix indent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
Ignacio Casal Quinteiro [Wed, 30 Mar 2022 10:48:02 +0000 (12:48 +0200)]
osxaudio: iterate device only if needed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
Ignacio Casal Quinteiro [Wed, 30 Mar 2022 07:59:59 +0000 (09:59 +0200)]
osxaudio: reduce scope of default device id variable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
Jan Schmidt [Thu, 26 May 2022 19:15:13 +0000 (05:15 +1000)]
amc: Add H.265 encoder mapping.
Add mime type mapping to enable the use of Android H.265 encoders
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2511>
Mengkejiergeli Ba [Fri, 13 May 2022 09:21:25 +0000 (17:21 +0800)]
msdkdec: Decoder should use its own pool when downstream allocator is not recognizable
Msdkdec should use it own pool when the allocation from downstream query
is not any msdk_allocator (i.e. msdk_video_allocator,
msdk_dmabuf_allocator and msdk_system_allocator). Otherwise, when using
pipeline "msdkh264dec ! vah264enc !" to transcode a not 16-bit-aligned
stream (i.e. 1920x1080), the transcoding will fail due to the size
mismatch issue between decoder pool and encoder pool.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2451>
Bastien Nocera [Tue, 7 Jun 2022 15:31:43 +0000 (17:31 +0200)]
gtk: Fix double-free when OpenGL can't be initialised
gtk_gl_area_get_error() doesn't return a copy of the error, but just the
error. If initialising OpenGL fails, then GtkGstGLWidget will consume
the error, and cause GTK to try and display freed memory.
==50914== Invalid read of size 8
==50914== at 0x4C4CB8A: gtk_gl_area_draw_error_screen (gtkglarea.c:663)
==50914== by 0x4C4CB8A: gtk_gl_area_draw (gtkglarea.c:687)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== by 0x4D4B6BF: gtk_stack_render (gtkstack.c:2207)
==50914== by 0x4BB4B03: gtk_css_custom_gadget_draw (gtkcsscustomgadget.c:159)
==50914== by 0x4BBA4C4: gtk_css_gadget_draw (gtkcssgadget.c:885)
==50914== by 0x4D4D780: gtk_stack_draw (gtkstack.c:2119)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== by 0x4BAF0C3: gtk_container_draw (gtkcontainer.c:3674)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== Address 0x187a0818 is 8 bytes inside a block of size 16 free'd
==50914== at 0x48480E4: free (vg_replace_malloc.c:872)
==50914== by 0x49A5B8C: g_free (gmem.c:218)
==50914== by 0x49C1013: g_slice_free1 (gslice.c:1183)
==50914== by 0x4990DE4: g_error_free (gerror.c:870)
==50914== by 0x4990FE9: g_clear_error (gerror.c:1052)
==50914== by 0x1A489780: _get_gl_context (gtkgstglwidget.c:540)
==50914== by 0x1A4863CB: gst_gtk_invoke_func (gstgtkutils.c:39)
==50914== by 0x49A3834: g_main_context_invoke_full (gmain.c:6137)
==50914== by 0x1A486450: gst_gtk_invoke_on_main (gstgtkutils.c:59)
==50914== by 0x1A48A29E: gtk_gst_gl_widget_init_winsys (gtkgstglwidget.c:632)
==50914== by 0x1A4887E7: gst_gtk_gl_sink_start (gstgtkglsink.c:267)
==50914== by 0x6579810: gst_base_sink_change_state (gstbasesink.c:5662)
==50914== Block was alloc'd at
==50914== at 0x484586F: malloc (vg_replace_malloc.c:381)
==50914== by 0x49A9278: g_malloc (gmem.c:125)
==50914== by 0x49C1BA5: g_slice_alloc (gslice.c:1072)
==50914== by 0x49C3BCC: g_slice_alloc0 (gslice.c:1098)
==50914== by 0x499096B: g_error_allocate (gerror.c:708)
==50914== by 0x4990AF1: UnknownInlinedFun (gerror.c:722)
==50914== by 0x4990AF1: g_error_copy (gerror.c:892)
==50914== by 0x4C4B9F9: gtk_gl_area_set_error (gtkglarea.c:1036)
==50914== by 0x4C4BAF7: gtk_gl_area_real_create_context (gtkglarea.c:346)
==50914== by 0x4B21B28: _gtk_marshal_OBJECT__VOIDv (gtkmarshalers.c:2730)
==50914== by 0x4920B78: UnknownInlinedFun (gclosure.c:893)
==50914== by 0x4920B78: g_signal_emit_valist (gsignal.c:3406)
==50914== by 0x4920CB2: g_signal_emit (gsignal.c:3553)
==50914== by 0x4C4B927: gtk_gl_area_realize (gtkglarea.c:308)
Reproduced by running:
MESA_GL_VERSION_OVERRIDE=2.7 totem
See https://gitlab.gnome.org/GNOME/totem/-/issues/522
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2565>
Víctor Manuel Jáquez Leal [Mon, 6 Jun 2022 08:56:12 +0000 (10:56 +0200)]
va: Update plugin cache.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2522>
Víctor Manuel Jáquez Leal [Sun, 29 May 2022 11:43:29 +0000 (13:43 +0200)]
vah264enc: Guard logging functions
.. and use spec for rate control rather than static switch.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2522>
Víctor Manuel Jáquez Leal [Mon, 30 May 2022 08:20:11 +0000 (10:20 +0200)]
vah264enc: Support default and none rate control.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2522>
Víctor Manuel Jáquez Leal [Sun, 29 May 2022 10:09:05 +0000 (12:09 +0200)]
va: encoder: Rate control property.
Fixes: #1241
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2522>
Philippe Normand [Mon, 30 May 2022 10:26:24 +0000 (11:26 +0100)]
webrtcbin: Add a prepare-data-channel GObject signal
This new signal allows data-channel consumers to configure signal handlers on a
newly created data-channel, before any data or state change has been notified.
The webrtcin unit-tests were refactored to make use of this new signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2427>
Philippe Normand [Mon, 16 May 2022 15:43:57 +0000 (16:43 +0100)]
webrtcdatachannel: Chain to parent class constructed
And add a debug log statement.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2427>
Sebastian Dröge [Mon, 6 Jun 2022 09:31:52 +0000 (12:31 +0300)]
flvdemux: Make use of the streams API if used in a streams-aware bin
This allows adding audio/video streams after 6s.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2559>
Eric Knapp [Thu, 2 Jun 2022 14:32:28 +0000 (10:32 -0400)]
decklinkvideosink: Add 3G-SDI Level A output support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2544>
He Junyan [Mon, 6 Dec 2021 08:30:46 +0000 (16:30 +0800)]
Docs: Add the design document for DMA buffer sharing.
Co-authored-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1431>
He Junyan [Sat, 4 Jun 2022 07:05:05 +0000 (15:05 +0800)]
h264parser: Fix memory leaks in parse_user_data_unregistered().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2551>
Jan Alexander Steffens (heftig) [Sat, 4 Jun 2022 15:23:00 +0000 (17:23 +0200)]
rtmp2: Fix allocation of GstRtmpMeta
Use the right size.
On 64-bit platforms, `GstMetaInfo` is larger than `GstRtmpMeta`, which
masked this bug. On 32-bit platforms, it causes crashes. Thanks to
@maxatka for discovering this.
Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1721
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2553>
Jan Alexander Steffens (heftig) [Fri, 3 Jun 2022 16:35:54 +0000 (18:35 +0200)]
aacparse: Avoid mismatch between src_caps and output_header_type
If our downstream caps didn't intersect, we attempted to convert between
raw and ADTS stream formats, if possible. If the caps still did not
intersect, we then used the modified `src_caps` but left the
`output_header_type` unmodified.
This caused a mismatch between caps and actual stream format.
Avoid this by first copying the `src_caps` to `convcaps` for the
additional intersection tests, replacing `src_caps` if we succeed.
While we're here, clean up the code a bit and remove the `codec_data`
field from outgoing ADTS caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2550>
Sebastian Dröge [Sat, 4 Jun 2022 07:27:09 +0000 (10:27 +0300)]
flvdemux: Actually make use of the debug category
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2552>
Robert Mader [Thu, 2 Jun 2022 14:38:55 +0000 (16:38 +0200)]
gstwaylandsink: Add support for the "render-rectangle" property
We already implement the `set_render_rectangle` videooverlay interface,
thus install the videooverlay property accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2479>
Robert Mader [Tue, 4 Jan 2022 14:20:41 +0000 (15:20 +0100)]
gstwayland: Move reusable parts of the waylandsink into a library
In preparation for the new element `GstGtkWaylandSink`, move reusable
parts out of `GstWaylandSink` into the already exisiting but very
barebone library.
Notable changes include:
- the `GstWaylandVideo` interface was dropped
- support for `wl-shell` was dropped
- lots of renaming in order to match established naming patterns
- lots of code modernisations, reducing boilerplate
- members were made private wherever possible
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2479>
Jan Alexander Steffens (heftig) [Sun, 5 Jun 2022 22:30:15 +0000 (00:30 +0200)]
opencv: Allow building against 4.6.x
Replace the broken version checks with one modeled after
`GLIB_CHECK_VERSION`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2557>
Thibault Saunier [Mon, 30 May 2022 18:00:55 +0000 (14:00 -0400)]
validate: Fix running as a tracer
We need to rebuild runner.c as this is where the plugin is defined
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2555>
Olivier Crête [Mon, 30 May 2022 20:31:38 +0000 (16:31 -0400)]
webrtcbin: Reject answers that don't contain the same number of m-line as offer
Otherwise, it segfaults later. Also add test to validate this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2526>
Marc Leeman [Tue, 15 Mar 2022 11:44:20 +0000 (12:44 +0100)]
rfbsrc: add uri interface
Adding a uri interface enables plugging in RFB/VNC sources to anything
that makes use of uridecodebin:
gst-play-1.0 rfb://:password@10.40.216.180:5903?shared=1
Use userinfo to pass user (ignored) and password, other key/value pairs
can be encoded in the query part of the URI (see shared)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1963>
Seungha Yang [Thu, 2 Jun 2022 18:22:03 +0000 (03:22 +0900)]
gst-env: Add support for PowerShell 7
The executable binary name of "PowerShell 7" is "pwsh.exe"
which is different from system default installed
"Windows PowerShell (version 5.x or older)"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2545>
Andoni Morales Alastruey [Mon, 16 May 2022 22:36:24 +0000 (00:36 +0200)]
videoparse: rename from _free to _clear
The function does not free the structure but the data
contained within.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Andoni Morales Alastruey [Mon, 16 May 2022 17:29:10 +0000 (19:29 +0200)]
video: add new video-sei.h header to the list of video_headers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Andoni Morales Alastruey [Mon, 16 May 2022 12:21:53 +0000 (14:21 +0200)]
h264parse: fix leak in user data unregistered
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Andoni Morales Alastruey [Mon, 16 May 2022 10:46:06 +0000 (12:46 +0200)]
test: update tests to include the new meta
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Andoni Morales Alastruey [Sun, 27 Feb 2022 18:41:12 +0000 (18:41 +0000)]
Fix documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Brad Hards [Thu, 17 Feb 2022 04:55:19 +0000 (15:55 +1100)]
h264parse: add unit test for Precision Time Stamp in SEI messages
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Brad Hards [Thu, 17 Feb 2022 04:55:19 +0000 (15:55 +1100)]
h264parse: fix copying of data and UUID
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Andoni Morales Alastruey [Sun, 19 Dec 2021 18:14:05 +0000 (19:14 +0100)]
h264parse: add support Precision Time Stamp in SEI messages
Expose User Data Unregistered as a new Meta and add
API to parse Precision Time Stamp (ST 0604).
Fixes #927
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
Seungha Yang [Wed, 1 Jun 2022 17:22:19 +0000 (02:22 +0900)]
meson: cuda: Add missing override_dependency()
Required for GstCuda library to be consumed via "gstreamer-cuda-1.0"
dependency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2539>
Seungha Yang [Thu, 2 Jun 2022 12:25:38 +0000 (21:25 +0900)]
cuda: Fix uninitialized debug category
Make sure debug category init
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2542>
Mengkejiergeli Ba [Fri, 22 Apr 2022 06:46:07 +0000 (06:46 +0000)]
msdkav1enc: Reorder pts
This is a workaround for pts because oneVPL cannot handle the pts
correctly when there is b-frames. We first cache the input frame pts in
a queue then retrive the smallest one for the output encoded frame as
we always output the coded frame when this frame is displayable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
Mengkejiergeli Ba [Thu, 31 Mar 2022 06:45:03 +0000 (06:45 +0000)]
msdkav1enc: Add b-pyramid and p-pyramid
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
Mengkejiergeli Ba [Thu, 31 Mar 2022 06:33:55 +0000 (06:33 +0000)]
msdkav1enc: Add tile for encoding
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
Mengkejiergeli Ba [Thu, 31 Mar 2022 06:03:36 +0000 (06:03 +0000)]
msdk: Add msdkav1enc element
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
Stéphane Cerveau [Wed, 1 Jun 2022 14:14:24 +0000 (16:14 +0200)]
soup: fix soup debug category
Use soup debug category in souploader
for soup plugin element load.
Inititalize properly soup utils category.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2535>
Jakub Adam [Tue, 31 May 2022 18:39:29 +0000 (20:39 +0200)]
amfencoder: always empty the queue when pushing output samples
gst_amf_encoder_try_output() pushes at most one output buffer downstream
although more may be ready. As a consequence, output samples will keep
queueing up in AMFComponent whenever QueryOutput() returns AMF_REPEAT
(and do_wait is FALSE). This has negative impact on latency when the
video being encoded is a live stream.
In order to avoid it, always retrieve and push all samples available in
AMFComponent's output queue at once.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2536>
Seungha Yang [Sat, 28 May 2022 21:05:27 +0000 (06:05 +0900)]
hlsdemux2: Adjust debug log level
HLS manifest might not be represented by a single common caps
when different codecs are mixed in a playlist, but it
does not seem to be a critical issue we need to warn.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2516>
Guillaume Desmottes [Wed, 1 Jun 2022 07:25:29 +0000 (09:25 +0200)]
basetransform: handle gst_base_transform_query_caps() returning NULL
If gst_base_transform_transform_caps() returns NULL, gst_base_transform_query_caps()
will return NULL as well.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2532>
Jan Alexander Steffens (heftig) [Wed, 18 May 2022 15:03:27 +0000 (17:03 +0200)]
clock: Avoid creating a weakref with every entry
Creating and destroying weakrefs takes a write lock on a global
`GRWLock`. This makes for a very contended lock when the pipeline has
many synchronizing elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2530>
Nicolas Dufresne [Fri, 27 May 2022 18:18:30 +0000 (14:18 -0400)]
video: Fix NV12_16L32 size calculation
The subsampling of the second plane was not taken into account, resulting in a
16bit per pixel buffers instead of 12.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2512>
Guillaume Desmottes [Tue, 31 May 2022 12:27:51 +0000 (14:27 +0200)]
basetransform: fix critical if transform_caps() returned NULL
klass->transform_caps() may return NULL, which was raising this
critical:
GStreamer-CRITICAL **: 12:23:56.243: gst_caps_is_subset: assertion 'subset != NULL' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2528>
Stéphane Cerveau [Mon, 2 May 2022 14:55:34 +0000 (16:55 +0200)]
adaptivedemux2: fix plugin/element init
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.
Initialize the debug categories properly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2348>
Seungha Yang [Sat, 28 May 2022 21:55:27 +0000 (06:55 +0900)]
directshow: Fix for uninitialized debug category warning
A method in the code is used in another place (device provider)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2519>
Víctor Manuel Jáquez Leal [Sun, 29 May 2022 10:42:52 +0000 (12:42 +0200)]
va: Register base classes as abstract.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2521>
Víctor Manuel Jáquez Leal [Sun, 29 May 2022 10:09:22 +0000 (12:09 +0200)]
va: encoder: Use entrypoint type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2521>
tom schuring [Sun, 29 May 2022 10:38:38 +0000 (20:38 +1000)]
plugin: add Apache 2 license to known licenses
the licence in gstreamer/subprojects/gstreamer/gst/gstplugin.c
currently is defined to be one of:
LGPL GPL QPL GPL/QPL MPL BSD MIT/X11 0BSD Proprietary
The open source project for the kinesis plugin is using an
Apache 2.0 license. Because "Apache 2.0" is not one of the
supported licenses it automatically falls back to Proprietary.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2514>
Víctor Manuel Jáquez Leal [Fri, 27 May 2022 12:47:21 +0000 (14:47 +0200)]
va264enc: Fix typo.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2508>
Víctor Manuel Jáquez Leal [Fri, 27 May 2022 12:45:51 +0000 (14:45 +0200)]
va: encoder: Fix regression since commit
2042c2d4f0.
There's no need to compare with the open entrypoint to query the
encoder. This commit removes the checks to the configured entrypoint
with the parameter.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2508>
Jan Schmidt [Sun, 29 May 2022 10:27:38 +0000 (20:27 +1000)]
rtpptdemux: Don't GST_FLOW_ERROR when ignoring invalid packets
https://bugzilla.gnome.org/show_bug.cgi?id=741398 changed
rtpptdemux in 2014 to not post a GST_ELEMENT_ERROR on the
bus when dropping an invalid (non-RTP) packet, but still
returned GST_FLOW_ERROR upstream - so the pipeline still
stops, but now without a useful bus error.
Return GST_FLOW_OK instead, so the pipeline keeps
running. Some old telephony equipment can send invalid
packets before the real RTP traffic starts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2520>
Seungha Yang [Sat, 26 Mar 2022 14:48:46 +0000 (23:48 +0900)]
mfvideoencoder: Handle dynamic property update
Re-init MFT on property update to apply new encoding options
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
Seungha Yang [Sat, 26 Mar 2022 14:50:24 +0000 (23:50 +0900)]
mediafoundation: Run indent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
Seungha Yang [Sat, 26 Mar 2022 13:24:27 +0000 (22:24 +0900)]
mfvideoenc: Remove redundant bitwise or operation
MFT_ENUM_FLAG_SORTANDFILTER_APPROVED_ONLY (0xc0) covers
MFT_ENUM_FLAG_SORTANDFILTER (0x40)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
Seungha Yang [Sat, 26 Mar 2022 12:47:10 +0000 (21:47 +0900)]
mfvideoencoder: Early terminate d3d11 interop
Shared texture will work only for the same GPU
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
Seungha Yang [Sat, 26 Mar 2022 12:43:50 +0000 (21:43 +0900)]
mfvideoencoder: Check HRESULT code as well for GPU sync
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
Seungha Yang [Sat, 26 Mar 2022 12:40:47 +0000 (21:40 +0900)]
mfvideoencoder: Don't specify keyed mutex misc flag
Current implemetation copies textures using non-keyed mutex way.
D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX is pointless
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
Nirbheek Chauhan [Sat, 28 May 2022 11:16:04 +0000 (16:46 +0530)]
jack: Always use jack_free as specified by the docs
Fixes a crash on Windows due to a CRT mismatch. The JACK installation
still uses MSVCRT, and we the Universal CRT for both MinGW and MSVC.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2497>
Nirbheek Chauhan [Wed, 25 May 2022 19:51:43 +0000 (01:21 +0530)]
jack: Add support for detecting libjack on Windows
No source code changes were necessary to get the plugin working on
Windows with MSVC.
Run QJackCtl and audiotestsrc ! jackaudiosink just works.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2497>
Víctor Manuel Jáquez Leal [Wed, 25 May 2022 11:25:15 +0000 (13:25 +0200)]
vacompositor: Pass video info pointer than copying it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2496>
Víctor Manuel Jáquez Leal [Wed, 25 May 2022 11:24:41 +0000 (13:24 +0200)]
vacompositor: Remove useless consts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2496>
Seungha Yang [Fri, 27 May 2022 12:13:43 +0000 (21:13 +0900)]
d3d11decoder: Work around Intel DXVA driver crash
Intel DXVA driver crashes sometimes (from GPU thread) if
ID3D11VideoDecoder is released while there are outstanding view objects.
To make sure the object life cycle, holds an ID3D11VideoDecoder refcount
in GstD3D11Memory object.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2504>
Xavier Claessens [Fri, 27 May 2022 13:37:41 +0000 (09:37 -0400)]
ci: Make sure to always update subprojects
The command was not run in Windows jobs, better keep subprojects
handling in a single script.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2509>
Seungha Yang [Thu, 26 May 2022 14:50:08 +0000 (23:50 +0900)]
qsvencoder: Bind internal texture to render target
... so that memory allocator can initialize texture with black color
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2502>
Seungha Yang [Thu, 26 May 2022 14:46:05 +0000 (23:46 +0900)]
d3d11memory: Clear YUV texture with black color
We prefer black color as an initial texture color and
Direct3D11 runtime will initialize texture with zeros (except for alpha)
which is fine for RGB formats. But UV components of YUV texture
requires manual clear for black color.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2502>
U. Artie Eoff [Thu, 26 May 2022 16:08:44 +0000 (12:08 -0400)]
tests: vaapi: remove unused header
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2503>
U. Artie Eoff [Thu, 26 May 2022 16:06:43 +0000 (12:06 -0400)]
tests: vaapi: fix memleak in vaapioverlay test
Need to unmap the frame to ensure vaapioverlay can destruct/dispose.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2503>
U. Artie Eoff [Tue, 24 May 2022 16:54:05 +0000 (12:54 -0400)]
tests: va: add simple vacompositor test
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2481>
Mengkejiergeli Ba [Fri, 22 Apr 2022 08:29:56 +0000 (16:29 +0800)]
msdkh265enc: Add intra refresh parameters
Note that for msdkh265enc, intra refresh parameters are only supported
under low-power mode. If these parameters are set without enabling lowpower,
they will be simply ignored.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2308>
Mengkejiergeli Ba [Fri, 15 Apr 2022 05:38:20 +0000 (13:38 +0800)]
msdkh264enc: Add intra refresh parameters
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2308>
Seungha Yang [Sun, 22 May 2022 15:36:50 +0000 (00:36 +0900)]
tests: examples: Stop duplicating keyboard interaction handler code
Extract the code from QSV and use it for D3D11 and NVCODEC examples
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2468>
Tim-Philipp Müller [Thu, 26 May 2022 13:08:55 +0000 (14:08 +0100)]
webrtc: fix build with older libnice versions
1) check for right macro name when checking for NICE_VERSION_CHECK
2) if libnice version is 0.1.18.1 this should not satisfy
a NICE_VERSION_CHECK(0,1,19).
Fixes build with libnice 0.1.18.1 subproject checkout.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2499>
Hou Qi [Tue, 24 May 2022 08:07:13 +0000 (16:07 +0800)]
v4l2: Reset transfer in gst_v4l2_object_acquire_format()
get_colorspace() checks input caps transfer when mapping V4L2_XFER_FUNC_709
back to V4L2_COLORSPACE_BT2020 and GST_VIDEO_TRANSFER_BT2020_12. After
receiving source change event, decoder will G_FMT and S_FMT again. So need
to reset transfer when acquiring format to avoid using the old transfer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2475>
Jan Schmidt [Mon, 23 May 2022 19:33:05 +0000 (05:33 +1000)]
amc: Don't map input buffer with write mode
When copying data out of a GStreamer buffer, we don't
need to map it writable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2492>
Philippe Normand [Wed, 11 May 2022 08:17:46 +0000 (09:17 +0100)]
webrtc: Use new libnice API to get the candidate relay address
Corresponding libnice API added in:
https://gitlab.freedesktop.org/libnice/libnice/-/merge_requests/229 (0.1.19)
https://gitlab.freedesktop.org/libnice/libnice/-/merge_requests/232 (0.1.20)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1998>
Philippe Normand [Wed, 11 May 2022 08:15:33 +0000 (09:15 +0100)]
webrtc: Ensure the NICE_CHECK_VERSION macro is available
This macro was introduced in libnice 0.1.19.1, so until we bump our libnice
dependency to 0.1.20 we have to vendor the macro.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1998>
Philippe Normand [Sat, 26 Mar 2022 12:36:46 +0000 (12:36 +0000)]
webrtc: Refactor ICECandidateStats freeing logic to a dedicated function
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1998>
Philippe Normand [Sun, 20 Mar 2022 12:36:07 +0000 (12:36 +0000)]
webrtcbin: Document IceCandidateStats and RTCIceCandidatePairStats
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1998>
Sherrill Lin [Wed, 1 Sep 2021 16:12:24 +0000 (16:12 +0000)]
webrtcstats: Update unit test for outbound rtp stats
"remote-id" is not guaranteed to present after commit
1deb034e3d873f577a38bc483e6256b0346ee874.
Thus, we should not fail the test if "remote-id" is not found.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1998>
Sherrill Lin [Wed, 30 Jun 2021 20:01:10 +0000 (16:01 -0400)]
webrtcstats: Improve selected candidate pair stats by adding ICE candidate info
The implementation follows w3.org specs:
* https://www.w3.org/TR/webrtc-stats/#icecandidate-dict*
* https://www.w3.org/TR/webrtc-stats/#candidatepair-dict*
Corresponding unit tests are also added.
Rebased and updated from
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1462
Fixes #1207
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1998>
He Junyan [Mon, 23 May 2022 12:58:47 +0000 (20:58 +0800)]
va: H264enc: Add encoder for VAEntrypointEncSliceLP.
We name vah264lpenc to support H264's VAEntrypointEncSliceLP encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2472>
He Junyan [Wed, 25 May 2022 12:01:34 +0000 (20:01 +0800)]
va: encoder: Do not reset the frame count when reconfig().
We should not reset the input/output_frame_count when some configure
changes. For example, the if resolution changes, the current way just
resets the frame count and make the PTS of the output buffer restart
from the original PTS of the first frame. That causes a lot of QOS
event and drop all the new frames.
We should only reset them when encoder start().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2489>
He Junyan [Wed, 25 May 2022 11:57:18 +0000 (19:57 +0800)]
va: encoder: change reset_state() to a virtual function of base class.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2489>
Seungha Yang [Tue, 24 May 2022 17:10:30 +0000 (02:10 +0900)]
playbin3: Configure combiner on pad-added if needed
When collection is updated, decodebin3 exposes pad first and then
streams-selected message is posted.
The condition can cause a situation where playbin3 links non-existing
combiner/playsink pads (since streams-selected is not posted yet) with
new decodebin output pad. This commit will re-check selected/active
streams condition on pad-added and reconfigure output if needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2482>
Piotrek Brzeziński [Wed, 25 May 2022 11:00:58 +0000 (13:00 +0200)]
cutter: Include running/stream-time in messages
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2490>
Stéphane Cerveau [Fri, 4 Feb 2022 13:47:32 +0000 (14:47 +0100)]
gstreamer-full-static: autopep on script
Pass autopep on generate_init_static_plugins.py
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1637>