Nicolas Dichtel [Fri, 8 Apr 2022 14:03:42 +0000 (16:03 +0200)]
ipv6: fix panic when forwarding a pkt with no in6 dev
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5%
CC: stable@vger.kernel.org
Fixes:
ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets")
Reported-by: kongweibin <kongweibin2@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lv Ruyi [Fri, 8 Apr 2022 09:49:41 +0000 (09:49 +0000)]
dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()
Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sat, 9 Apr 2022 11:20:19 +0000 (13:20 +0200)]
netfilter: nft_socket: make cgroup match work in input too
cgroupv2 helper function ignores the already-looked up sk
and uses skb->sk instead.
Just pass sk from the calling function instead; this will
make cgroup matching work for udp and tcp in input even when
edemux did not set skb->sk already.
Fixes:
e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ben Greear [Wed, 6 Apr 2022 17:56:59 +0000 (10:56 -0700)]
mac80211: fix ht_capa printout in debugfs
Don't use sizeof(pointer) when calculating scnprintf offset.
Fixes:
01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220406175659.20611-1-greearb@candelatech.com
[correct the Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rameshkumar Sundaram [Mon, 11 Apr 2022 09:07:51 +0000 (14:37 +0530)]
cfg80211: hold bss_lock while updating nontrans_list
Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.
Fixes:
0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Mon, 11 Apr 2022 09:42:03 +0000 (11:42 +0200)]
nl80211: correctly check NL80211_ATTR_REG_ALPHA2 size
We need this to be at least two bytes, so we can access
alpha2[0] and alpha2[1]. It may be three in case some
userspace used NUL-termination since it was NLA_STRING
(and we also push it out with NUL-termination).
Cc: stable@vger.kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Benedikt Spranger [Fri, 8 Apr 2022 09:47:45 +0000 (11:47 +0200)]
net/sched: taprio: Check if socket flags are valid
A user may set the SO_TXTIME socket option to ensure a packet is send
at a given time. The taprio scheduler has to confirm, that it is allowed
to send a packet at that given time, by a check against the packet time
schedule. The scheduler drop the packet, if the gates are closed at the
given send time.
The check, if SO_TXTIME is set, may fail since sk_flags are part of an
union and the union is used otherwise. This happen, if a socket is not
a full socket, like a request socket for example.
Add a check to verify, if the union is used for sk_flags.
Fixes:
4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dinh Nguyen [Thu, 7 Apr 2022 13:25:21 +0000 (08:25 -0500)]
net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link
When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.
Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.
Fixes:
fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ramadoss [Thu, 7 Apr 2022 04:46:10 +0000 (10:16 +0530)]
net: phy: LAN87xx: remove genphy_softreset in config_aneg
When the T1 phy master/slave state is changed, at the end of config_aneg
function genphy_softreset is called. After the reset all the registers
configured during the config_init are restored to default value.
To avoid this, removed the genphy_softreset call.
v1->v2
------
Added the author in cc
Fixes:
8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tao Jin [Sat, 9 Apr 2022 22:44:24 +0000 (18:44 -0400)]
ALSA: hda/realtek: add quirk for Lenovo Thinkpad X12 speakers
For this specific device on Lenovo Thinkpad X12 tablet, the verbs were
dumped by qemu running a guest OS that init this codec properly.
After studying the dump, it turns out that
the same quirk used by the other Lenovo devices can be reused.
The patch was tested working against the mainline kernel.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tao Jin <tao-j@outlook.com>
Link: https://lore.kernel.org/r/CO6PR03MB6241CD73310B37858FE64C85E1E89@CO6PR03MB6241.namprd03.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fabio M. De Francesco [Sat, 9 Apr 2022 01:26:55 +0000 (03:26 +0200)]
ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
Syzbot reports "KASAN: null-ptr-deref Write in
snd_pcm_format_set_silence".[1]
It is due to missing validation of the "silence" field of struct
"pcm_format_data" in "pcm_formats" array.
Add a test for valid "pat" and, if it is not so, return -EINVAL.
[1] https://lore.kernel.org/lkml/
000000000000d188ef05dc2c7279@google.com/
Reported-and-tested-by: syzbot+205eb15961852c2c5974@syzkaller.appspotmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220409012655.9399-1-fmdefrancesco@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Mon, 11 Apr 2022 00:21:36 +0000 (14:21 -1000)]
Linux 5.18-rc2
Linus Torvalds [Sun, 10 Apr 2022 20:08:50 +0000 (10:08 -1000)]
Merge tag 'tty-5.18-rc2' of git://git./linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"This is a single serial driver fix for a build issue that showed up
due to changes that came in through the tty tree in 5.18-rc1 that were
missed previously. It resolves a build error with the mpc52xx_uart
driver.
It has been in linux-next this week with no reported problems"
* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
Linus Torvalds [Sun, 10 Apr 2022 20:04:30 +0000 (10:04 -1000)]
Merge tag 'staging-5.18-rc2' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 5.18-rc2 that resolves an
endian issue for the r8188eu driver. It has been in linux-next all
this week with no reported problems"
* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Fix PPPoE tag insertion on little endian systems
Linus Torvalds [Sun, 10 Apr 2022 19:55:09 +0000 (09:55 -1000)]
Merge tag 'driver-core-5.18-rc2' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
Linus Torvalds [Sun, 10 Apr 2022 19:52:46 +0000 (09:52 -1000)]
Merge tag 'char-misc-5.18-rc2' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"A single driver fix. It resolves the build warning issue on 32bit
systems in the habannalabs driver that came in during the 5.18-rc1
merge cycle.
It has been in linux-next for all this week with no reported problems"
* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Fix test build failures
Linus Torvalds [Sun, 10 Apr 2022 17:36:18 +0000 (07:36 -1000)]
Merge tag 'powerpc-5.18-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
guest could be lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
fixes crashes seen due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.
* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: Set max_mapnr correctly"
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
powerpc/numa: Handle partially initialized numa nodes
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
KVM: PPC: Book3S PR: Disallow AIL != 0
KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
KVM: PPC: Book3S HV P9: Fix "lost kick" race
Linus Torvalds [Sun, 10 Apr 2022 17:25:49 +0000 (07:25 -1000)]
Merge tag 'irq-urgent-2022-04-10' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- A fix for a long standing bug in the ARM GICv3 redistributor
polling which uses the wrong bit number to test.
- Prevent translation of bogus ACPI table entries which map device
interrupts into the IPI space on ARM GICs.
- Don't write into the pending register of ARM GICV4 before the scan
in hardware has completed.
- A set of build and correctness fixes for the Qualcomm MPM driver"
* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic, gic-v3: Prevent GSI to SGI translations
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
irq/qcom-mpm: Fix build error without MAILBOX
Linus Torvalds [Sun, 10 Apr 2022 17:12:27 +0000 (07:12 -1000)]
Merge tag 'x86_urgent_for_v5.18_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the MSI message data struct definition
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msi: Fix msi message data shadow struct
x86/extable: Prefer local labels in .set directives
x86,bpf: Avoid IBT objtool warning
objtool: Fix SLS validation for kcov tail-call replacement
objtool: Fix IBT tail-call detection
x86/bug: Prevent shadowing in __WARN_FLAGS
x86/mm/tlb: Revert retpoline avoidance approach
Linus Torvalds [Sun, 10 Apr 2022 17:08:22 +0000 (07:08 -1000)]
Merge tag 'perf_urgent_for_v5.18_rc2' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- A couple of fixes to cgroup-related handling of perf events
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly
at fork()
- Add support for a new Raptor Lake CPU
* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Always set cpuctx cgrp when enable cgroup event
perf/core: Fix perf_cgroup_switch()
perf/core: Use perf_cgroup_info->active to check if cgroup is active
perf/core: Don't pass task around when ctx sched in
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
perf/core: Inherit event_caps
perf/x86/uncore: Add Raptor Lake uncore support
perf/x86/msr: Add Raptor Lake CPU support
perf/x86/cstate: Add Raptor Lake support
perf/x86: Add Intel Raptor Lake support
Linus Torvalds [Sun, 10 Apr 2022 16:56:46 +0000 (06:56 -1000)]
Merge tag 'locking_urgent_for_v5.18_rc2' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
Linus Torvalds [Sun, 10 Apr 2022 16:47:49 +0000 (06:47 -1000)]
Merge tag 'sched_urgent_for_v5.18_rc2' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Use the correct static key checking primitive on the IRQ exit path
- Two fixes for the new forceidle balancer
* tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
sched: Teach the forced-newidle balancer about CPU affinity limitation.
sched/core: Fix forceidle balancing
Toke Høiland-Jørgensen [Mon, 4 Apr 2022 20:48:00 +0000 (22:48 +0200)]
ath9k: Fix usage of driver-private space in tx_info
The ieee80211_tx_info_clear_status() helper also clears the rate counts and
the driver-private part of struct ieee80211_tx_info, so using it breaks
quite a few other things. So back out of using it, and instead define a
ath-internal helper that only clears the area between the
status_driver_data and the rates info. Combined with moving the
ath_frame_info struct to status_driver_data, this avoids clearing anything
we shouldn't be, and so we can keep the existing code for handling the rate
information.
While fixing this I also noticed that the setting of
tx_info->status.rates[tx_rateindex].count on hardware underrun errors was
always immediately overridden by the normal setting of the same fields, so
rearrange the code so that the underrun detection actually takes effect.
The new helper could be generalised to a 'memset_between()' helper, but
leave it as a driver-internal helper for now since this needs to go to
stable.
Cc: stable@vger.kernel.org
Reported-by: Peter Seiderer <ps.report@gmx.net>
Fixes:
037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk
Borislav Petkov [Tue, 5 Apr 2022 16:55:37 +0000 (18:55 +0200)]
brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constant
Fix:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
^~~~
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic
Borislav Petkov [Tue, 5 Apr 2022 15:15:14 +0000 (17:15 +0200)]
mt76: Fix undefined behavior due to shift overflowing the constant
Fix:
drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de
Linus Torvalds [Sun, 10 Apr 2022 04:45:10 +0000 (18:45 -1000)]
Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix the clang command line option probing and remove some options to
filter out, fixing the build with the latest clang versions
- Fix 'perf bench' futex and epoll benchmarks to deal with machines
with more than 1K CPUs
- Fix 'perf test tsc' error message when not supported
- Remap perf ring buffer if there is no space for event, fixing perf
usage in 32-bit ChromeOS
- Drop objdump stderr to avoid getting stuck waiting for stdout output
in 'perf annotate'
- Fix up garbled output by now showing unwind error messages when
augmenting frame in best effort mode
- Fix perf's libperf_print callback, use the va_args eprintf() variant
- Sync vhost and arm64 cputype headers with the kernel sources
- Fix 'perf report --mem-mode' with ARM SPE
- Add missing external commands ('iiostat', etc) to 'perf --list-cmds'
* tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output
perf tools: Add external commands to list-cmds
perf docs: Add perf-iostat link to manpages
perf session: Remap buf if there is no space for event
perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K
perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K
perf tools: Fix perf's libperf_print callback
perf: arm-spe: Fix perf report --mem-mode
perf unwind: Don't show unwind error messages when augmenting frame pointer stack
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf test tsc: Fix error message when not supported
perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
perf python: Fix probing for some clang command line options
tools build: Filter out options and warnings not supported by clang
tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
tools include UAPI: Sync linux/vhost.h with the kernel sources
Linus Torvalds [Sun, 10 Apr 2022 04:31:59 +0000 (18:31 -1000)]
Merge tag 'cxl+nvdimm-for-5.18-rc2' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull cxl and nvdimm fixes from Dan Williams:
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/pci: Drop shadowed variable
tools/testing/nvdimm: Fix security_init() symbol collision
Linus Torvalds [Sun, 10 Apr 2022 04:17:43 +0000 (18:17 -1000)]
Merge tag 'gpio-fixes-for-v5.18-rc2' of git://git./linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a race condition with consumers accessing the fields of GPIO IRQ
chips before they're fully initialized
* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Restrict usage of GPIO chip irq members before initialization
Thomas Gleixner [Sat, 9 Apr 2022 20:21:55 +0000 (22:21 +0200)]
Merge tag 'irqchip-fixes-5.18-1' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix GICv3 polling for RWP in redistributors
- Reject ACPI attempts to use SGIs on GIC/GICv3
- Fix unpredictible behaviour when making a VPE non-resident
with GICv4
- A couple of fixes for the newly merged qcom-mpm driver
Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org
Ian Rogers [Thu, 7 Apr 2022 23:04:59 +0000 (16:04 -0700)]
perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output
If objdump writes to stderr it can block waiting for it to be read. As
perf doesn't read stderr then progress stops with perf waiting for
stdout output.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lexi Shao <shaolexi@huawei.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Mon, 4 Apr 2022 22:15:41 +0000 (00:15 +0200)]
perf tools: Add external commands to list-cmds
The `perf --list-cmds` output prints only internal commands, although
there is no reason for that from users' perspective.
Adding the external commands to commands array with NULL function
pointer allows printing all perf commands while not changing the logic
of command handler selection.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Mon, 4 Apr 2022 22:15:40 +0000 (00:15 +0200)]
perf docs: Add perf-iostat link to manpages
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Denis Nikitin [Wed, 30 Mar 2022 03:11:30 +0000 (20:11 -0700)]
perf session: Remap buf if there is no space for event
If a perf event doesn't fit into remaining buffer space return NULL to
remap buf and fetch the event again.
Keep the logic to error out on inadequate input from fuzzing.
This fixes perf failing on ChromeOS (with 32b userspace):
$ perf report -v -i perf.data
...
prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data?
Error:
failed to process sample
Fixes:
57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Denis Nikitin <denik@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 9 Apr 2022 16:05:46 +0000 (06:05 -1000)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
- add support for new devices (ufs, mvsas)
- a major set of fixes in lpfc
- get rid of a driver specific ioctl in pcmraid
- a major rework of aha152x to get rid of the scsi_pointer.
- minor fixes and obvious changes including several spelling updates.
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
scsi: ufs: ufshpb: Fix a NULL check on list iterator
scsi: sd: Clean up gendisk if device_add_disk() failed
scsi: message: fusion: Remove redundant variable dmp
scsi: mvsas: Add PCI ID of RocketRaid 2640
scsi: sd: sd_read_cpr() requires VPD pages
scsi: mpt3sas: Fail reset operation if config request timed out
scsi: sym53c500_cs: Stop using struct scsi_pointer
scsi: ufs: ufs-pci: Add support for Intel MTL
scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment
scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use
scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch"
scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch"
scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
scsi: aic7xxx: Use standard PCI subsystem, subdevice defines
scsi: ufs: qcom: Drop custom Android boot parameters
scsi: core: sysfs: Remove comments that conflict with the actual logic
scsi: hisi_sas: Remove stray fallthrough annotation
scsi: virtio-scsi: Eliminate anonymous module_init & module_exit
scsi: isci: Fix spelling mistake "doesnt" -> "doesn't"
...
Piotr Chmura [Thu, 31 Mar 2022 15:55:50 +0000 (17:55 +0200)]
media: si2157: unknown chip version Si2147-A30 ROM 0x50
Fix firmware file names assignment in si2157 tuner, allow for running
devices without firmware files needed.
modprobe gives error: unknown chip version Si2147-A30 ROM 0x50
Device initialization is interrupted.
Caused by:
1. table si2157_tuners has swapped fields rom_id and required vs struct
si2157_tuner_info.
2. both firmware file names can be null for devices with
required == false - device uses build-in firmware in this case
Tested on this device:
m07ca:1871 AVerMedia Technologies, Inc. TD310 DVB-T/T2/C dongle
[mchehab: fix mangled patch]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215726
Link: https://lore.kernel.org/lkml/5f660108-8812-383c-83e4-29ee0558d623@leemhuis.info/
Link: https://lore.kernel.org/linux-media/c4bcaff8-fbad-969e-ad47-e2c487ac02a1@gmail.com
Fixes:
1c35ba3bf972 ("media: si2157: use a different namespace for firmware")
Cc: stable@vger.kernel.org # 5.17.x
Signed-off-by: Piotr Chmura <chmooreck@gmail.com>
Tested-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Athira Rajeev [Wed, 6 Apr 2022 17:51:11 +0000 (23:21 +0530)]
perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K
The 'perf bench epoll' testcase fails on systems with more than 1K CPUs.
Testcase: perf bench epoll all
Result snippet:
<<>>
Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs.
perf: pthread_create: No such file or directory
<<>>
In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads
from respective bench_epoll_* function. Though the logs shows direct
failure from pthread_create, the actual failure is from
"sched_setaffinity" returning EINVAL (invalid argument).
This happens because the default mask size in glibc is 1024. To overcome
this 1024 CPUs mask size limitation of cpu_set_t, change the mask size
using the CPU_*_S macros.
Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC
to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the
mask.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Wed, 6 Apr 2022 17:51:10 +0000 (23:21 +0530)]
perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K
The 'perf bench futex' testcase fails on systems with more than 1K CPUs.
Testcase: perf bench futex all
Failure snippet:
<<>>Running futex/hash benchmark...
perf: pthread_create: No such file or directory
<<>>
All the futex benchmarks (ie hash, lock-api, requeue, wake,
wake-parallel), pthread_create is invoked in respective bench_futex_*
function. Though the logs shows direct failure from pthread_create,
strace logs showed that actual failure is from "sched_setaffinity"
returning EINVAL (invalid argument).
This happens because the default mask size in glibc is 1024. To overcome
this 1024 CPUs mask size limitation of cpu_set_t, change the mask size
using the CPU_*_S macros.
Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC
to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the
mask.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220406175113.87881-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 8 Apr 2022 13:26:25 +0000 (16:26 +0300)]
perf tools: Fix perf's libperf_print callback
eprintf() does not expect va_list as the type of the 4th parameter.
Use veprintf() because it does.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes:
428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()")
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Fri, 8 Apr 2022 14:40:56 +0000 (15:40 +0100)]
perf: arm-spe: Fix perf report --mem-mode
Since commit
bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't allow opening the file unless one of the events has
PERF_SAMPLE_DATA_SRC set.
SPE doesn't have this set even though synthetic memory data is generated
after it is decoded. Fix this issue by setting DATA_SRC on SPE events.
This has no effect on the data collected because the SPE driver doesn't
do anything with that flag and doesn't generate samples.
Fixes:
bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Wed, 6 Apr 2022 14:56:51 +0000 (15:56 +0100)]
perf unwind: Don't show unwind error messages when augmenting frame pointer stack
Commit Fixes:
b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when
using 'perf record --call-graph=fp'") intended to add a 'best effort'
DWARF unwind that improved the frame pointer stack in most scenarios.
It's expected that the unwind will fail sometimes, but this shouldn't be
reported as an error. It only works when the return address can be
determined from the contents of the link register alone.
Fix the error shown when the unwinder requires extra registers by adding
a new flag that suppresses error messages. This flag is not set in the
normal --call-graph=dwarf unwind mode so that behavior is not changed.
Fixes:
b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 9 Apr 2022 14:48:15 +0000 (11:48 -0300)]
tools headers arm64: Sync arm64's cputype.h with the kernel sources
To get the changes in:
83bea32ac7ed37bb ("arm64: Add part number for Arm Cortex-A78AE")
That addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Chengdong Li [Fri, 8 Apr 2022 08:47:48 +0000 (16:47 +0800)]
perf test tsc: Fix error message when not supported
By default `perf test tsc` does not return the error message when the
child process detected kernel does not support it. Instead, the child
process prints an error message to stderr, unfortunately stderr is
redirected to /dev/null when verbose <= 0.
This patch does:
- return TEST_SKIP to the parent process instead of TEST_OK when
perf_read_tsc_conversion() is not supported.
- Add a new subtest of testing if TSC is supported on current
architecture by moving exist code to a separate function.
It avoids two places in test__perf_time_to_tsc() that return
TEST_SKIP by doing this.
- Extend the test suite definition to contain above two subtests.
Current test_suite and test_case structs do not support printing skip
reason when the number of subtest less than 1. To print skip reason, it
is necessary to extend current test suite definition.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220408084748.43707-1-chengdongli@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 7 Apr 2022 14:04:20 +0000 (11:04 -0300)]
perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
Using -ffat-lto-objects in the python feature test when building with
clang-13 results in:
clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
error: command '/usr/sbin/clang' failed with exit code 1
cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1
Noticed when building on a docker.io/library/archlinux:base container.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 8 Apr 2022 13:08:07 +0000 (10:08 -0300)]
perf python: Fix probing for some clang command line options
The clang compiler complains about some options even without a source
file being available, while others require one, so use the simple
tools/build/feature/test-hello.c file.
Then check for the "is not supported" string in its output, in addition
to the "unknown argument" already being looked for.
This was noticed when building with clang-13 where -ffat-lto-objects
isn't supported and since we were looking just for "unknown argument"
and not providing a source code to clang, was mistakenly assumed as
being available and not being filtered to set of command line options
provided to clang, leading to a build failure.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 5 Apr 2022 13:33:21 +0000 (10:33 -0300)]
tools build: Filter out options and warnings not supported by clang
These make the feature check fail when using clang, so remove them just
like is done in tools/perf/Makefile.config to build perf itself.
Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config
when building with clang is also necessary to avoid these warnings
turned into errors (-Werror):
CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o
In file included from util/scripting-engines/trace-event-perl.c:35:
In file included from /usr/lib64/perl5/CORE/perl.h:4085:
In file included from /usr/lib64/perl5/CORE/hv.h:659:
In file included from /usr/lib64/perl5/CORE/hv_func.h:34:
In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4:
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^~~~~~~~~~
/usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START'
# define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
v ^= (v>>23); \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
} STMT_END
^~~~~~~~
/usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END'
# define STMT_END )
^
Please refer to the discussion on the Link: tag below, where Nathan
clarifies the situation:
<quote>
acme> And then get to the problems at the end of this message, which seem
acme> similar to the problem described here:
acme>
acme> From Nathan Chancellor <>
acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
acme>
acme> https://lkml.org/lkml/2020/9/1/135
acme>
acme> So perhaps in this case its better to disable that
acme> -Werror,-Wcompound-token-split-by-macro when building with clang?
Yes, I think that is probably the best solution. As far as I can tell,
at least in this file and context, the warning appears harmless, as the
"create a GNU C statement expression from two different macros" is very
much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS.
The warning is fixed in upstream Perl by just avoiding creating GNU C
statement expressions using STMT_START and STMT_END:
https://github.com/Perl/perl5/issues/18780
https://github.com/Perl/perl5/pull/18984
If I am reading the source code correctly, an alternative to disabling
the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it
seems like that might end up impacting more than just this site,
according to the issue discussion above.
</quote>
Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Apr 2022 20:28:48 +0000 (17:28 -0300)]
tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
Just like its done for ldopts and for both in tools/perf/Makefile.config.
Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using:
$(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS))
And we need to do it to allow for building with versions of clang where
some gcc options selected by distros are not available.
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 14 Apr 2020 12:12:55 +0000 (09:12 -0300)]
tools include UAPI: Sync linux/vhost.h with the kernel sources
To get the changes in:
b04d910af330b55e ("vdpa: support exposing the count of vqs to userspace")
a61280ddddaa45f9 ("vdpa: support exposing the config size to userspace")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
$ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
--- tools/include/uapi/linux/vhost.h 2021-07-15 16:17:01.
840818309 -0300
+++ include/uapi/linux/vhost.h 2022-04-02 18:55:05.
702522387 -0300
@@ -150,4 +150,11 @@
/* Get the valid iova range */
#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
struct vhost_vdpa_iova_range)
+
+/* Get the config size */
+#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32)
+
+/* Get the count of all virtqueues */
+#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32)
+
#endif
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-04-04 14:52:25.
036375145 -0300
+++ after 2022-04-04 14:52:31.
906549976 -0300
@@ -38,4 +38,6 @@
[0x73] = "VDPA_GET_CONFIG",
[0x76] = "VDPA_GET_VRING_NUM",
[0x78] = "VDPA_GET_IOVA_RANGE",
+ [0x79] = "VDPA_GET_CONFIG_SIZE",
+ [0x80] = "VDPA_GET_VQS_COUNT",
};
$
Cc: Longpeng <longpeng2@huawei.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/lkml/YksxoFcOARk%2Fldev@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 9 Apr 2022 04:58:03 +0000 (18:58 -1000)]
Merge tag 'block-5.18-2022-04-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Nothing major in here, just a few small fixes:
- Small series of neglected drbd patches (Christoph, Lv, Xiaomeng)
- Remove dead variable in cdrom (Enze)"
* tag 'block-5.18-2022-04-08' of git://git.kernel.dk/linux-block:
drbd: set QUEUE_FLAG_STABLE_WRITES
drbd: fix an invalid memory access caused by incorrect use of list iterator
drbd: Fix five use after free bugs in get_initial_state
cdrom: remove unused variable
Linus Torvalds [Sat, 9 Apr 2022 04:50:14 +0000 (18:50 -1000)]
Merge tag 'io_uring-5.18-2022-04-08' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit bigger than usual post merge window, largely due to a revert and
a fix of at what point files are assigned for requests.
The latter fixing a linked request use case where a dependent link can
rely on what file is assigned consistently.
Summary:
- 32-bit compat fix for IORING_REGISTER_IOWQ_AFF (Eugene)
- File assignment fixes (me)
- Revert of the NAPI poll addition from this merge window. The author
isn't available right now to engage on this, so let's revert it and
we can retry for the 5.19 release (me, Jakub)
- Fix a timeout removal race (me)
- File update and SCM fixes (Pavel)"
* tag 'io_uring-5.18-2022-04-08' of git://git.kernel.dk/linux-block:
io_uring: fix race between timeout flush and removal
io_uring: use nospec annotation for more indexes
io_uring: zero tag on rsrc removal
io_uring: don't touch scm_fp_list after queueing skb
io_uring: nospec index for tags on files update
io_uring: implement compat handling for IORING_REGISTER_IOWQ_AFF
Revert "io_uring: Add support for napi_busy_poll"
io_uring: drop the old style inflight file tracking
io_uring: defer file assignment
io_uring: propagate issue_flags state down to file assignment
io_uring: move read/write file prep state into actual opcode handler
io_uring: defer splice/tee file validity check until command issue
io_uring: don't check req->file in io_fsync_prep()
Linus Torvalds [Sat, 9 Apr 2022 04:29:02 +0000 (18:29 -1000)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several bug fixes for old bugs:
- Welcome Leon as co-maintainer for RDMA so we are back to having two
people
- Some corner cases are fixed in mlx5's MR code
- Long standing CM bug where a DREQ at the wrong time can result in a
long timeout
- Missing locking and refcounting in hf1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hfi1: Fix use-after-free bug for mm struct
IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition
IB/cm: Cancel mad on the DREQ event when the state is MRA_REP_RCVD
RDMA/mlx5: Add a missing update of cache->last_add
RDMA/mlx5: Don't remove cache MRs when a delay is needed
MAINTAINERS: Update qib and hfi1 related drivers
MAINTAINERS: Add Leon Romanovsky to RDMA maintainers
Linus Torvalds [Sat, 9 Apr 2022 04:23:02 +0000 (18:23 -1000)]
Merge tag 'acpi-5.18-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These revert a problematic commit from the 5.17 development cycle and
finalize the elimination of acpi_bus_get_device() that mostly took
place during the recent merge window.
Specifics:
- Revert an ACPI processor driver change related to cache
invalidation in acpi_idle_play_dead() that clearly was a mistake
and introduced user-visible regressions (Akihiko Odaki).
- Replace the last instance of acpi_bus_get_device() added during the
recent merge window and drop the function to prevent more users of
it from being added (Rafael Wysocki)"
* tag 'acpi-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Eliminate acpi_bus_get_device()
Revert "ACPI: processor: idle: Only flush cache on entering C3"
Heiko Stuebner [Sat, 9 Apr 2022 03:46:00 +0000 (09:16 +0530)]
RISC-V: KVM: include missing hwcap.h into vcpu_fp
vcpu_fp uses the riscv_isa_extension mechanism which gets
defined in hwcap.h but doesn't include that head file.
While it seems to work in most cases, in certain conditions
this can lead to build failures like
../arch/riscv/kvm/vcpu_fp.c: In function ‘kvm_riscv_vcpu_fp_reset’:
../arch/riscv/kvm/vcpu_fp.c:22:13: error: implicit declaration of function ‘riscv_isa_extension_available’ [-Werror=implicit-function-declaration]
22 | if (riscv_isa_extension_available(&isa, f) ||
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/riscv/kvm/vcpu_fp.c:22:49: error: ‘f’ undeclared (first use in this function)
22 | if (riscv_isa_extension_available(&isa, f) ||
Fix this by simply including the necessary header.
Fixes:
0a86512dc113 ("RISC-V: KVM: Factor-out FP virtualization into separate
sources")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
Anup Patel [Sat, 9 Apr 2022 03:45:51 +0000 (09:15 +0530)]
KVM: selftests: riscv: Fix alignment of the guest_hang() function
The guest_hang() function is used as the default exception handler
for various KVM selftests applications by setting it's address in
the vstvec CSR. The vstvec CSR requires exception handler base address
to be at least 4-byte aligned so this patch fixes alignment of the
guest_hang() function.
Fixes:
3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Anup Patel [Sat, 9 Apr 2022 03:45:44 +0000 (09:15 +0530)]
KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table
Supporting hardware updates of PTE A and D bits is optional for any
RISC-V implementation so current software strategy is to always set
these bits in both G-stage (hypervisor) and VS-stage (guest kernel).
If PTE A and D bits are not set by software (hypervisor or guest)
then RISC-V implementations not supporting hardware updates of these
bits will cause traps even for perfectly valid PTEs.
Based on above explanation, the VS-stage page table created by various
KVM selftest applications is not correct because PTE A and D bits are
not set. This patch fixes VS-stage page table programming of PTE A and
D bits for KVM selftests.
Fixes:
3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Anup Patel [Sat, 9 Apr 2022 03:45:33 +0000 (09:15 +0530)]
RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put()
We might have RISC-V systems (such as QEMU) where VMID is not part
of the TLB entry tag so these systems will have to flush all TLB
entries upon any change in hgatp.VMID.
Currently, we zero-out hgatp CSR in kvm_arch_vcpu_put() and we
re-program hgatp CSR in kvm_arch_vcpu_load(). For above described
systems, this will flush all TLB entries whenever VCPU exits to
user-space hence reducing performance.
This patch fixes above described performance issue by not clearing
hgatp CSR in kvm_arch_vcpu_put().
Fixes:
34bde9d8b9e6 ("RISC-V: KVM: Implement VCPU world-switch")
Cc: stable@vger.kernel.org
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Kai-Heng Feng [Fri, 8 Apr 2022 02:22:04 +0000 (10:22 +0800)]
net: atlantic: Avoid out-of-bounds indexing
UBSAN warnings are observed on atlantic driver:
[ 294.432996] UBSAN: array-index-out-of-bounds in /build/linux-Qow4fL/linux-5.15.0/drivers/net/ethernet/aquantia/atlantic/aq_nic.c:484:48
[ 294.433695] index 8 is out of range for type 'aq_vec_s *[8]'
The ring is dereferenced right before breaking out the loop, to prevent
that from happening, only use the index in the loop to fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1958770
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20220408022204.16815-1-kai.heng.feng@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle [Fri, 8 Apr 2022 10:15:21 +0000 (12:15 +0200)]
net: dsa: felix: suppress -EPROBE_DEFER errors
The DSA master might not have been probed yet in which case the probe of
the felix switch fails with -EPROBE_DEFER:
[ 4.435305] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517
It is not an error. Use dev_err_probe() to demote this particular error
to a debug message.
Fixes:
56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220408101521.281886-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Sat, 9 Apr 2022 01:06:11 +0000 (15:06 -1000)]
Merge tag 'linux-kselftest-kunit-fixes-5.18-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
"A single documentation fix to incorrect and outdated usage
information"
* tag 'linux-kselftest-kunit-fixes-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: fix path to .kunitconfig in start.rst
Linus Torvalds [Sat, 9 Apr 2022 00:48:35 +0000 (14:48 -1000)]
Merge tag 'linux-kselftest-fixes-5.18-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Build and run-times fixes to tests:
- header dependencies
- missing tear-downs to release allocated resources in assert paths
- missing error messages when build fails
- coccicheck and unused variable warnings"
* tag 'linux-kselftest-fixes-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/harness: Pass variant to teardown
selftests/harness: Run TEARDOWN for ASSERT failures
selftests: fix an unused variable warning in pidfd selftest
selftests: fix header dependency for pid_namespace selftests
selftests: x86: add 32bit build warnings for SUSE
selftests/proc: fix array_size.cocci warning
selftests/vDSO: fix array_size.cocci warning
Linus Torvalds [Sat, 9 Apr 2022 00:31:41 +0000 (14:31 -1000)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (migration, highmem,
sparsemem, mremap, mempolicy, and memcg), lz4, mailmap, and
MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add Tom as clang reviewer
mm/list_lru.c: revert "mm/list_lru: optimize memcg_reparent_list_lru_node()"
mailmap: update Vasily Averin's email address
mm/mempolicy: fix mpol_new leak in shared_policy_replace
mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning
lz4: fix LZ4_decompress_safe_partial read out of bound
highmem: fix checks in __kmap_local_sched_{in,out}
mm: migrate: use thp_order instead of HPAGE_PMD_ORDER for new page allocation.
Tom Rix [Fri, 8 Apr 2022 20:09:16 +0000 (13:09 -0700)]
MAINTAINERS: add Tom as clang reviewer
I have been helping with build breaks and other clang things and would
like to help with the reviews.
Link: https://lkml.kernel.org/r/20220407175715.3378998-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 8 Apr 2022 20:09:13 +0000 (13:09 -0700)]
mm/list_lru.c: revert "mm/list_lru: optimize memcg_reparent_list_lru_node()"
Commit
405cc51fc104 ("mm/list_lru: optimize memcg_reparent_list_lru_node()")
has subtle races which are proving ugly to fix. Revert the original
optimization. If quantitative testing indicates that we have a
significant problem here then other implementations can be looked at.
Fixes:
405cc51fc104 ("mm/list_lru: optimize memcg_reparent_list_lru_node()")
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 8 Apr 2022 20:09:10 +0000 (13:09 -0700)]
mailmap: update Vasily Averin's email address
I'm moving to a @linux.dev account. Map my old addresses.
Link: https://lkml.kernel.org/r/737c7c2b-cdab-63ee-be90-cb33316c9657@linux.dev
Signed-off-by: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miaohe Lin [Fri, 8 Apr 2022 20:09:07 +0000 (13:09 -0700)]
mm/mempolicy: fix mpol_new leak in shared_policy_replace
If mpol_new is allocated but not used in restart loop, mpol_new will be
freed via mpol_put before returning to the caller. But refcnt is not
initialized yet, so mpol_put could not do the right things and might
leak the unused mpol_new. This would happen if mempolicy was updated on
the shared shmem file while the sp->lock has been dropped during the
memory allocation.
This issue could be triggered easily with the below code snippet if
there are many processes doing the below work at the same time:
shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT);
shm = shmat(shmid, 0, 0);
loop many times {
mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0);
mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask,
maxnode, 0);
}
Link: https://lkml.kernel.org/r/20220329111416.27954-1-linmiaohe@huawei.com
Fixes:
42288fe366c4 ("mm: mempolicy: Convert shared_policy mutex to spinlock")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [3.8]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paolo Bonzini [Fri, 8 Apr 2022 20:09:04 +0000 (13:09 -0700)]
mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
If an mremap() syscall with old_size=0 ends up in move_page_tables(), it
will call invalidate_range_start()/invalidate_range_end() unnecessarily,
i.e. with an empty range.
This causes a WARN in KVM's mmu_notifier. In the past, empty ranges
have been diagnosed to be off-by-one bugs, hence the WARNing. Given the
low (so far) number of unique reports, the benefits of detecting more
buggy callers seem to outweigh the cost of having to fix cases such as
this one, where userspace is doing something silly. In this particular
case, an early return from move_page_tables() is enough to fix the
issue.
Link: https://lkml.kernel.org/r/20220329173155.172439-1-pbonzini@redhat.com
Reported-by: syzbot+6bde52d89cfdf9f61425@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Fri, 8 Apr 2022 20:09:01 +0000 (13:09 -0700)]
mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning
The gcc 12 compiler reports a "'mem_section' will never be NULL" warning
on the following code:
static inline struct mem_section *__nr_to_section(unsigned long nr)
{
#ifdef CONFIG_SPARSEMEM_EXTREME
if (!mem_section)
return NULL;
#endif
if (!mem_section[SECTION_NR_TO_ROOT(nr)])
return NULL;
:
It happens with CONFIG_SPARSEMEM_EXTREME off. The mem_section definition
is
#ifdef CONFIG_SPARSEMEM_EXTREME
extern struct mem_section **mem_section;
#else
extern struct mem_section mem_section[NR_SECTION_ROOTS][SECTIONS_PER_ROOT];
#endif
In the !CONFIG_SPARSEMEM_EXTREME case, mem_section is a static
2-dimensional array and so the check "!mem_section[SECTION_NR_TO_ROOT(nr)]"
doesn't make sense.
Fix this warning by moving the "!mem_section[SECTION_NR_TO_ROOT(nr)]"
check up inside the CONFIG_SPARSEMEM_EXTREME block and adding an
explicit NR_SECTION_ROOTS check to make sure that there is no
out-of-bound array access.
Link: https://lkml.kernel.org/r/20220331180246.2746210-1-longman@redhat.com
Fixes:
3e347261a80b ("sparsemem extreme implementation")
Signed-off-by: Waiman Long <longman@redhat.com>
Reported-by: Justin Forbes <jforbes@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guo Xuenan [Fri, 8 Apr 2022 20:08:58 +0000 (13:08 -0700)]
lz4: fix LZ4_decompress_safe_partial read out of bound
When partialDecoding, it is EOF if we've either filled the output buffer
or can't proceed with reading an offset for following match.
In some extreme corner cases when compressed data is suitably corrupted,
UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial
may lead to read out of bound problem during decoding. lz4 upstream has
fixed it [2] and this issue has been disscussed here [3] before.
current decompression routine was ported from lz4 v1.8.3, bumping
lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd
better fix it first.
[1] https://lore.kernel.org/all/
000000000000830d1205cf7f0477@google.com/
[2] https://github.com/lz4/lz4/commit/
c5d6f8a8be3927c0bec91bcc58667a6cfad244ad#
[3] https://lore.kernel.org/all/
CC666AE8-4CA4-4951-B6FB-
A2EFDE3AC03B@fb.com/
Link: https://lkml.kernel.org/r/20211111105048.2006070-1-guoxuenan@huawei.com
Reported-by: syzbot+63d688f1d899c588fb71@syzkaller.appspotmail.com
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Yann Collet <cyan@fb.com>
Cc: Chengyang Fan <cy.fan@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Max Filippov [Fri, 8 Apr 2022 20:08:55 +0000 (13:08 -0700)]
highmem: fix checks in __kmap_local_sched_{in,out}
When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are
initialized with 0 value, but the check is done with pte_none. 0 pte
however does not necessarily mean that pte_none will return true. e.g.
on xtensa it returns false, resulting in the following runtime warnings:
WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108
CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_out+0x51/0x108
__schedule+0x71a/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0
CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_in+0x50/0xe0
finish_task_switch$isra$0+0x1ce/0x2f8
__schedule+0x86e/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0.
Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com
Fixes:
5fbda3ecd14a ("sched: highmem: Store local kmaps in task struct")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zi Yan [Fri, 8 Apr 2022 20:08:52 +0000 (13:08 -0700)]
mm: migrate: use thp_order instead of HPAGE_PMD_ORDER for new page allocation.
Fix a VM_BUG_ON_FOLIO(folio_nr_pages(old) != nr_pages) crash.
With folios support, it is possible to have other than HPAGE_PMD_ORDER
THPs, in the form of folios, in the system. Use thp_order() to correctly
determine the source page order during migration.
Link: https://lkml.kernel.org/r/20220404165325.1883267-1-zi.yan@sent.com
Link: https://lore.kernel.org/linux-mm/20220404132908.GA785673@u2004/
Fixes:
d68eccad3706 ("mm/filemap: Allow large folios to be added to the page cache")
Reported-by: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yue Hu [Thu, 31 Mar 2022 11:57:18 +0000 (19:57 +0800)]
fscache: remove FSCACHE_OLD_API Kconfig option
Commit
01491a756578 ("fscache, cachefiles: Disable configuration") added
the FSCACHE_OLD_API configuration when rewritten. Now, it's not used any
more. Remove it.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://listman.redhat.com/archives/linux-cachefs/2022-March/006647.html
Yue Hu [Fri, 1 Apr 2022 06:37:15 +0000 (14:37 +0800)]
fscache: Use wrapper fscache_set_cache_state() directly when relinquishing
We already have the wrapper function to set cache state.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
cc: linux-cachefs@redhat.com
Link: https://listman.redhat.com/archives/linux-cachefs/2022-April/006648.html
Yue Hu [Sat, 2 Apr 2022 04:47:43 +0000 (12:47 +0800)]
fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS
fscache_cookies_seq_ops is only used in proc.c that is compiled under
enabled CONFIG_PROC_FS, so move related code under this config. The
same case exsits in internal.h.
Also, make fscache_lru_cookie_timeout static due to no user outside
of cookie.c.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://listman.redhat.com/archives/linux-cachefs/2022-April/006649.html
Yue Hu [Wed, 6 Apr 2022 03:50:17 +0000 (11:50 +0800)]
fscache: Remove the cookie parameter from fscache_clear_page_bits()
The cookie is not used at all, remove it and update the usage in io.c
and afs/write.c (which is the only user outside of fscache currently)
at the same time.
[DH: Amended the documentation also]
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://listman.redhat.com/archives/linux-cachefs/2022-April/006659.html
Yue Hu [Thu, 7 Apr 2022 11:02:39 +0000 (19:02 +0800)]
docs: filesystems: caching/backend-api.rst: fix an object withdrawn API
There's no fscache_are_objects_withdrawn() helper at all to test if
cookie withdrawal is completed currently. The cache backend is using
fscache_wait_for_objects() to wait all objects to be withdrawn.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://listman.redhat.com/archives/linux-cachefs/2022-April/006705.html
Yue Hu [Thu, 7 Apr 2022 10:28:32 +0000 (18:28 +0800)]
docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use
1. cache backend is using fscache_relinquish_cache() rather than
fscache_relinquish_cookie() to reset the cache cookie.
2. No fscache_cache_relinquish() helper currently, it should be
fscache_relinquish_cache().
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://listman.redhat.com/archives/linux-cachefs/2022-April/006703.html
Link: https://listman.redhat.com/archives/linux-cachefs/2022-April/006704.html
Dave Wysochanski [Tue, 5 Apr 2022 13:46:49 +0000 (09:46 -0400)]
cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr
Use the actual length of volume coherency data when setting the
xattr to avoid the following KASAN report.
BUG: KASAN: slab-out-of-bounds in cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
Write of size 4 at addr
ffff888101e02af4 by task kworker/6:0/1347
CPU: 6 PID: 1347 Comm: kworker/6:0 Kdump: loaded Not tainted 5.18.0-rc1-nfs-fscache-netfs+ #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
Workqueue: events fscache_create_volume_work [fscache]
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5a
print_report.cold+0x5e/0x5db
? __lock_text_start+0x8/0x8
? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
kasan_report+0xab/0x120
? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
kasan_check_range+0xf5/0x1d0
memcpy+0x39/0x60
cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
cachefiles_acquire_volume+0x2be/0x500 [cachefiles]
? __cachefiles_free_volume+0x90/0x90 [cachefiles]
fscache_create_volume_work+0x68/0x160 [fscache]
process_one_work+0x3b7/0x6a0
worker_thread+0x2c4/0x650
? process_one_work+0x6a0/0x6a0
kthread+0x16c/0x1a0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 1347:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
cachefiles_set_volume_xattr+0x76/0x350 [cachefiles]
cachefiles_acquire_volume+0x2be/0x500 [cachefiles]
fscache_create_volume_work+0x68/0x160 [fscache]
process_one_work+0x3b7/0x6a0
worker_thread+0x2c4/0x650
kthread+0x16c/0x1a0
ret_from_fork+0x22/0x30
The buggy address belongs to the object at
ffff888101e02af0
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 4 bytes inside of
8-byte region [
ffff888101e02af0,
ffff888101e02af8)
The buggy address belongs to the physical page:
page:
00000000a2292d70 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x101e02
flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
raw:
0017ffffc0000200 0000000000000000 dead000000000001 ffff888100042280
raw:
0000000000000000 0000000080660066 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888101e02980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc
ffff888101e02a00: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00
>
ffff888101e02a80: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 04 fc
^
ffff888101e02b00: fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc
ffff888101e02b80: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc
==================================================================
Fixes:
413a4a6b0b55 "cachefiles: Fix volume coherency attribute"
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/20220405134649.6579-1-dwysocha@redhat.com/
Link: https://lore.kernel.org/r/20220405142810.8208-1-dwysocha@redhat.com/
Jeffle Xu [Wed, 30 Mar 2022 09:47:59 +0000 (17:47 +0800)]
cachefiles: unmark inode in use in error path
Unmark inode in use if error encountered. If the in-use flag leakage
occurs in cachefiles_open_file(), Cachefiles will complain "Inode
already in use" when later another cookie with the same index key is
looked up.
If the in-use flag leakage occurs in cachefiles_create_tmpfile(), though
the "Inode already in use" warning won't be triggered, fix the leakage
anyway.
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Fixes:
1f08c925e7a3 ("cachefiles: Implement backing file wrangling")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://listman.redhat.com/archives/linux-cachefs/2022-March/006615.html
Link: https://listman.redhat.com/archives/linux-cachefs/2022-March/006618.html
Marcelo Ricardo Leitner [Thu, 7 Apr 2022 14:29:23 +0000 (11:29 -0300)]
net/sched: fix initialization order when updating chain 0 head
Currently, when inserting a new filter that needs to sit at the head
of chain 0, it will first update the heads pointer on all devices using
the (shared) block, and only then complete the initialization of the new
element so that it has a "next" element.
This can lead to a situation that the chain 0 head is propagated to
another CPU before the "next" initialization is done. When this race
condition is triggered, packets being matched on that CPU will simply
miss all other filters, and will flow through the stack as if there were
no other filters installed. If the system is using OVS + TC, such
packets will get handled by vswitchd via upcall, which results in much
higher latency and reordering. For other applications it may result in
packet drops.
This is reproducible with a tc only setup, but it varies from system to
system. It could be reproduced with a shared block amongst 10 veth
tunnels, and an ingress filter mirroring packets to another veth.
That's because using the last added veth tunnel to the shared block to
do the actual traffic, it makes the race window bigger and easier to
trigger.
The fix is rather simple, to just initialize the next pointer of the new
filter instance (tp) before propagating the head change.
The fixes tag is pointing to the original code though this issue should
only be observed when using it unlocked.
Fixes:
2190d1d0944f ("net: sched: introduce helpers to work with filter chains")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/b97d5f4eaffeeb9d058155bcab63347527261abf.1649341369.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Thu, 7 Apr 2022 13:24:22 +0000 (09:24 -0400)]
sctp: use the correct skb for security_sctp_assoc_request
Yi Chen reported an unexpected sctp connection abort, and it occurred when
COOKIE_ECHO is bundled with DATA Fragment by SCTP HW GSO. As the IP header
is included in chunk->head_skb instead of chunk->skb, it failed to check
IP header version in security_sctp_assoc_request().
According to Ondrej, SELinux only looks at IP header (address and IPsec
options) and XFRM state data, and these are all included in head_skb for
SCTP HW GSO packets. So fix it by using head_skb when calling
security_sctp_assoc_request() in processing COOKIE_ECHO.
v1->v2:
- As Ondrej noticed, chunk->head_skb should also be used for
security_sctp_assoc_established() in sctp_sf_do_5_1E_ca().
Fixes:
e215dab1c490 ("security: call security_sctp_assoc_request in sctp_sf_do_5_1D_ce")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/71becb489e51284edf0c11fc15246f4ed4cef5b6.1649337862.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Pasternak [Thu, 7 Apr 2022 07:07:03 +0000 (10:07 +0300)]
mlxsw: i2c: Fix initialization error flow
Add mutex_destroy() call in driver initialization error flow.
Fixes:
6882b0aee180f ("mlxsw: Introduce support for I2C bus")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220407070703.2421076-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 7 Apr 2022 16:55:38 +0000 (19:55 +0300)]
net: mdio: don't defer probe forever if PHY IRQ provider is missing
When a driver for an interrupt controller is missing, of_irq_get()
returns -EPROBE_DEFER ad infinitum, causing
fwnode_mdiobus_phy_device_register(), and ultimately, the entire
of_mdiobus_register() call, to fail. In turn, any phy_connect() call
towards a PHY on this MDIO bus will also fail.
This is not what is expected to happen, because the PHY library falls
back to poll mode when of_irq_get() returns a hard error code, and the
MDIO bus, PHY and attached Ethernet controller work fine, albeit
suboptimally, when the PHY library polls for link status. However,
-EPROBE_DEFER has special handling given the assumption that at some
point probe deferral will stop, and the driver for the supplier will
kick in and create the IRQ domain.
Reasons for which the interrupt controller may be missing:
- It is not yet written. This may happen if a more recent DT blob (with
an interrupt-parent for the PHY) is used to boot an old kernel where
the driver didn't exist, and that kernel worked with the
vintage-correct DT blob using poll mode.
- It is compiled out. Behavior is the same as above.
- It is compiled as a module. The kernel will wait for a number of
seconds specified in the "deferred_probe_timeout" boot parameter for
user space to load the required module. The current default is 0,
which times out at the end of initcalls. It is possible that this
might cause regressions unless users adjust this boot parameter.
The proposed solution is to use the driver_deferred_probe_check_state()
helper function provided by the driver core, which gives up after some
-EPROBE_DEFER attempts, taking "deferred_probe_timeout" into consideration.
The return code is changed from -EPROBE_DEFER into -ENODEV or
-ETIMEDOUT, depending on whether the kernel is compiled with support for
modules or not.
Fixes:
66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220407165538.4084809-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jens Axboe [Fri, 8 Apr 2022 17:08:58 +0000 (11:08 -0600)]
io_uring: fix race between timeout flush and removal
io_flush_timeouts() assumes the timeout isn't in progress of triggering
or being removed/canceled, so it unconditionally removes it from the
timeout list and attempts to cancel it.
Leave it on the list and let the normal timeout cancelation take care
of it.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan Williams [Fri, 8 Apr 2022 19:58:44 +0000 (12:58 -0700)]
cxl/pci: Drop shadowed variable
0day reports that wait_for_media_ready() declares an @rc variable twice.
>> drivers/cxl/pci.c:439:7: warning: Local variable 'rc' shadows outer variable [shadowVariable]
int rc;
^
drivers/cxl/pci.c:431:6: note: Shadowed declaration
int rc, i;
^
drivers/cxl/pci.c:439:7: note: Shadow variable
int rc;
^
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes:
523e594d9cc0 ("cxl/pci: Implement wait for media active")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/164944636936.455177.14136200464724208233.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Mon, 4 Apr 2022 03:19:46 +0000 (20:19 -0700)]
tools/testing/nvdimm: Fix security_init() symbol collision
Starting with the new perf-event support in the nvdimm core, the
nfit_test mock module stops compiling. Rename its security_init() to
nfit_security_init().
tools/testing/nvdimm/test/nfit.c:1845:13: error: conflicting types for ‘security_init’; have ‘void(struct nfit_test *)’
1845 | static void security_init(struct nfit_test *t)
| ^~~~~~~~~~~~~
In file included from ./include/linux/perf_event.h:61,
from ./include/linux/nd.h:11,
from ./drivers/nvdimm/nd-core.h:11,
from tools/testing/nvdimm/test/nfit.c:19:
Fixes:
9a61d0838cd0 ("drivers/nvdimm: Add nvdimm pmu structure")
Cc: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/164904238610.1330275.1889212115373993727.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Douglas Miller [Fri, 8 Apr 2022 13:35:23 +0000 (09:35 -0400)]
RDMA/hfi1: Fix use-after-free bug for mm struct
Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may
represent the last reference held on the task mm.
hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed
before the final use in hfi1_release_user_pages(). A new task may
allocate the mm structure while it is still being used, resulting in
problems. One manifestation is corruption of the mmap_sem counter leading
to a hang in down_write(). Another is corruption of an mm struct that is
in use by another task.
Fixes:
3d2a9d642512 ("IB/hfi1: Ensure correct mm is used at all times")
Link: https://lore.kernel.org/r/20220408133523.122165.72975.stgit@awfm-01.cornelisnetworks.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rafael J. Wysocki [Fri, 8 Apr 2022 17:50:44 +0000 (19:50 +0200)]
Merge branch 'acpi-bus'
* acpi-bus:
ACPI: bus: Eliminate acpi_bus_get_device()
Linus Torvalds [Fri, 8 Apr 2022 17:39:17 +0000 (07:39 -1000)]
Merge tag 'nfs-for-5.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Stable fixes:
- SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()
Bugfixes:
- Fix an Oopsable condition due to SLAB_ACCOUNT setting in the
NFSv4.2 xattr code.
- Fix for open() using an file open mode of '3' in NFSv4
- Replace readdir's use of xxhash() with hash_64()
- Several patches to handle malloc() failure in SUNRPC"
* tag 'nfs-for-5.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Move the call to xprt_send_pagedata() out of xprt_sock_sendmsg()
SUNRPC: svc_tcp_sendmsg() should handle errors from xdr_alloc_bvec()
SUNRPC: Handle allocation failure in rpc_new_task()
NFS: Ensure rpc_run_task() cannot fail in nfs_async_rename()
NFSv4/pnfs: Handle RPC allocation errors in nfs4_proc_layoutget
SUNRPC: Handle low memory situations in call_status()
SUNRPC: Handle ENOMEM in call_transmit_status()
NFSv4.2: Fix missing removal of SLAB_ACCOUNT on kmem_cache allocation
SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()
NFS: Replace readdir's use of xxhash() with hash_64()
SUNRPC: handle malloc failure in ->request_prepare
NFSv4: fix open failure with O_ACCMODE flag
Revert "NFSv4: Handle the special Linux file open access mode"
Linus Torvalds [Fri, 8 Apr 2022 17:09:17 +0000 (07:09 -1000)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The two main things to note are:
(1) The bulk of the diffstat is us reverting a horrible bodge we had
in place to ease the merging of maple tree during the merge
window (which turned out not to be needed, but anyway)
(2) The TLB invalidation fix is done in core code, as suggested by
(and Acked-by) Peter.
Summary:
- Revert temporary bodge in MTE coredumping to ease maple tree integration
- Fix stack frame size warning reported with 64k pages
- Fix stop_machine() race with instruction text patching
- Ensure alternatives patching routines are not instrumented
- Enable Spectre-BHB mitigation for Cortex-A78AE
- Fix hugetlb TLB invalidation when contiguous hint is used
- Minor perf driver fixes
- Fix some typos"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
arm64: Add part number for Arm Cortex-A78AE
arm64: patch_text: Fixup last cpu should be master
tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entry
arm64: alternatives: mark patch_alternative() as `noinstr`
perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER
perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator
arm64: Fix comments in macro __init_el2_gicv3
arm64: fix typos in comments
arch/arm64: Fix topology initialization for core scheduling
arm64: mte: Fix the stack frame size warning in mte_dump_tag_range()
Revert "arm64: Change elfcore for_each_mte_vma() to use VMA iterator"
Linus Torvalds [Fri, 8 Apr 2022 16:52:50 +0000 (06:52 -1000)]
Merge tag 'folio-5.18e' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"Fewer bug reports than I was expecting from enabling large folios.
One that doesn't show up on x86 but does on arm64, one that shows up
with hugetlbfs memory failure testing and one that shows up with page
migration, which it turns out I wasn't testing because my last NUMA
machine died. Need to set up a qemu fake NUMA machine so I don't skip
testing that in future.
Summary:
- Remove the migration code's assumptions about large pages being PMD
sized
- Don't call pmd_page() on a non-leaf PMD
- Fix handling of hugetlbfs pages in page_vma_mapped_walk"
* tag 'folio-5.18e' of git://git.infradead.org/users/willy/pagecache:
mm/rmap: Fix handling of hugetlbfs pages in page_vma_mapped_walk
mm/mempolicy: Use vma_alloc_folio() in new_page()
mm: Add vma_alloc_folio()
mm/migrate: Use a folio in migrate_misplaced_transhuge_page()
mm/migrate: Use a folio in alloc_migration_target()
mm/huge_memory: Avoid calling pmd_page() on a non-leaf PMD
Linus Torvalds [Fri, 8 Apr 2022 16:45:38 +0000 (06:45 -1000)]
Merge tag 'spi-fix-v5.18-rc1' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that have arrived since the merge window,
the most noticable one is a fix for unmapping messages when the
mapping was done with the struct device supplied to do the mapping
overridden"
* tag 'spi-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()
spi: cadence-quadspi: fix protocol setup for non-1-1-X operations
spi: core: add dma_map_dev for __spi_unmap_msg()
spi: mxic: Fix an error handling path in mxic_spi_probe()
spi: rpc-if: Fix RPM imbalance in probe error path
Linus Torvalds [Fri, 8 Apr 2022 16:42:03 +0000 (06:42 -1000)]
Merge tag 'regulator-fix-v5.18-rc1' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few small driver specific fixes for v5.18, plus an update to the
MAINTAINERS file"
* tag 'regulator-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
MAINTAINERS: Fix reviewer info for a few ROHM ICs
regulator: atc260x: Fix missing active_discharge_on setting
regulator: rtq2134: Fix missing active_discharge_on setting
regulator: wm8994: Add an off-on delay for WM8994 variant
Linus Torvalds [Fri, 8 Apr 2022 16:37:11 +0000 (06:37 -1000)]
Merge tag 'mmc-v5.18-rc1' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve API to make it clear that mmc_hw_reset() is for cards
- Fixup support for writeback-cache for eMMC and SD
- Check for errors after writes on SPI
MMC host:
- renesas_sdhi: A couple of fixes of TAP settings for eMMC HS400 mode
- mmci_stm32: Fixup check of all elements in sg list
- sdhci-xenon: Revert unnecessary fix for annoying 1.8V regulator warning"
* tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: improve API to make clear mmc_hw_reset is for cards
mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
mmc: renesas_sdhi: special 4tap settings only apply to HS400
mmc: core: Fixup support for writeback-cache for eMMC and SD
mmc: block: Check for errors after write on SPI
mmc: mmci: stm32: correctly check all elements of sg list
Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
Paolo Bonzini [Fri, 8 Apr 2022 16:30:04 +0000 (12:30 -0400)]
Merge tag 'kvmarm-fixes-5.18-1' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.18, take #1
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above
Linus Torvalds [Fri, 8 Apr 2022 16:29:25 +0000 (06:29 -1000)]
Merge tag 'iommu-fix-v5.18-rc1' of git://git./linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
- Fix boot regression due to a NULL-ptr dereference on OMAP machines
* tag 'iommu-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/omap: Fix regression in probe for NULL pointer dereference
Mateusz Palczewski [Thu, 24 Mar 2022 13:19:15 +0000 (14:19 +0100)]
Revert "iavf: Fix deadlock occurrence during resetting VF interface"
This change caused a regression with resetting while changing network
namespaces. By clearing the IFF_UP flag, the kernel now thinks it has
fully closed the device.
This reverts commit
0cc318d2e8408bc0ffb4662a0c3e5e57005ac6ff.
Fixes:
0cc318d2e840 ("iavf: Fix deadlock occurrence during resetting VF interface")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Mon, 4 Apr 2022 16:15:09 +0000 (18:15 +0200)]
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
The CI testing bots triggered the following splat:
[ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80
[ 718.206349] Read of size 4 at addr
ffff8881bd127e00 by task sh/20834
[ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1
[ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.
070720200218 07/07/2020
[ 718.223418] Call Trace:
[ 718.227139]
[ 718.230783] dump_stack_lvl+0x33/0x42
[ 718.234431] print_address_description.constprop.9+0x21/0x170
[ 718.238177] ? free_irq_cpu_rmap+0x53/0x80
[ 718.241885] ? free_irq_cpu_rmap+0x53/0x80
[ 718.245539] kasan_report.cold.18+0x7f/0x11b
[ 718.249197] ? free_irq_cpu_rmap+0x53/0x80
[ 718.252852] free_irq_cpu_rmap+0x53/0x80
[ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice]
[ 718.260174] ice_remove_arfs+0x5f/0x70 [ice]
[ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice]
[ 718.267419] ice_rebuild+0x39c/0xb60 [ice]
[ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice]
[ 718.278033] ? delay_tsc+0x4a/0xb0
[ 718.281513] ? preempt_count_sub+0x14/0xc0
[ 718.284984] ? delay_tsc+0x8f/0xb0
[ 718.288463] ice_do_reset+0x92/0xf0 [ice]
[ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice]
[ 718.295561] pci_reset_function+0x53/0x80
<...>
[ 718.393035] Allocated by task 690:
[ 718.433497] Freed by task 20834:
[ 718.495688] Last potentially related work creation:
[ 718.568966] The buggy address belongs to the object at
ffff8881bd127e00
which belongs to the cache kmalloc-96 of size 96
[ 718.574085] The buggy address is located 0 bytes inside of
96-byte region [
ffff8881bd127e00,
ffff8881bd127e60)
[ 718.579265] The buggy address belongs to the page:
[ 718.598905] Memory state around the buggy address:
[ 718.601809]
ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.604796]
ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 718.607794] >
ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.610811] ^
[ 718.613819]
ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 718.617107]
ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
This is due to that free_irq_cpu_rmap() is always being called
*after* (devm_)free_irq() and thus it tries to work with IRQ descs
already freed. For example, on device reset the driver frees the
rmap right before allocating a new one (the splat above).
Make rmap creation and freeing function symmetrical with
{request,free}_irq() calls i.e. do that on ifup/ifdown instead
of device probe/remove/resume. These operations can be performed
independently from the actual device aRFS configuration.
Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers
only when aRFS is disabled -- otherwise, CPU rmap sets and clears
its own and they must not be touched manually.
Fixes:
28bf26724fdb0 ("ice: Implement aRFS")
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Borislav Petkov [Tue, 5 Apr 2022 15:15:15 +0000 (17:15 +0200)]
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
Fix:
In file included from <command-line>:0:0:
In function ‘ddr_perf_counter_enable’,
inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
...
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de
Signed-off-by: Will Deacon <will@kernel.org>
Takashi Iwai [Thu, 7 Apr 2022 21:27:40 +0000 (23:27 +0200)]
ALSA: usb-audio: Increase max buffer size
The current limit of max buffer size 1MB seems too small for modern
devices with lots of channels and high sample rates.
Let's make bigger, 4MB.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220407212740.17920-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 7 Apr 2022 21:16:57 +0000 (23:16 +0200)]
ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb
In the implicit feedback mode, some parameters are tied between both
playback and capture streams. One of the tied parameters is the
period size, and this can be a problem if the device has different
number of channels to both streams. Assume that an application opens
a playback stream that has an implicit feedback from a capture stream,
and it allocates up to the max period and buffer size as much as
possible. When the capture device supports only more channels than
the playback, the minimum period and buffer sizes become larger than
the sizes the playback stream took. That is, the minimum size will be
over the max size the driver limits, and PCM core sees as if no
available configuration is found, returning -EINVAL mercilessly.
For avoiding this problem, we have to look through the counter part of
audioformat list for each sync ep, and checks the channels. If more
channels are found there, we reduce the max period and buffer sizes
accordingly.
You may wonder that the patch adds only the evaluation of channels
between streams, and what about other parameters? Both the format and
the rate are tied in the implicit fb mode, hence they are always
identical.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215792
Fixes:
5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220407211657.15087-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hongbin Wang [Thu, 7 Apr 2022 02:46:22 +0000 (22:46 -0400)]
vxlan: fix error return code in vxlan_fdb_append
When kmalloc and dst_cache_init failed,
should return ENOMEM rather than ENOBUFS.
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>