Blance Tang [Tue, 18 Dec 2018 02:42:43 +0000 (10:42 +0800)]
buildroot: Enable ddr_window tool [1/1]
PD#SWPL-3340
Problem:
DDR Window tool is no longer generated as a separate KO after DDR TOOL
configuration setting changed CL:41064
Solution:
Change DDR Window Tool configuration to tristate which can support
standalone KO
Enable DDR_TOOL in SmartHome default config
Verify:
Local
Change-Id: I15370cabe428a5103c1fe9b345a085822c056932
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
Jian Cao [Mon, 17 Dec 2018 06:19:16 +0000 (14:19 +0800)]
osd: need information whether current OSD is blanked or not [1/1]
PD#SWPL-3254
Problem:
need information whether current OSD is blanked or not
Solution:
add sysfs node osd_status
Verify:
verified on u212
Change-Id: Ie73417f08c648a750a881af375800aae57a48762
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Rui Wang [Thu, 13 Dec 2018 11:52:47 +0000 (19:52 +0800)]
video: add freeze video function [1/1]
PD#SWPL-3154
Problem:
Implement video freeze
Solution:
Add freeze video function
Verify:
Test pass by r311
Change-Id: I6a3839d26ea99ead7097f20c283afe9b8103a668
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
tao zeng [Wed, 14 Nov 2018 02:29:45 +0000 (10:29 +0800)]
mm: save wasted memory by slab [1/1]
PD#SWPL-1767
Problem:
When driver/kernel call kmalloc with large size, memory may waste
if size is not equal to 2^n. For example, driver call kmalloc with
size 129KB, kmalloc will allocate a 256KB memory block to caller.
Then 127kb memory will be wasted if this caller don't free it.
Solution:
Free tail of slab memory if size is not match to 2^n. This change
can save about 900KB memory after boot, and more than 100KB during
run time.
Verify:
P212
Change-Id: Iba378792ec30003358b64384361c0f0c4c2800d8
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Brian Zhu [Wed, 12 Dec 2018 15:39:15 +0000 (23:39 +0800)]
tb_detect: add external canvas config when multi-dec source [1/1]
PD#IPTV-52
Problem:
vframe from multi-dec has no canvas index
Solution:
use external canvas index for vframe from multi-dec
Verify:
verified by u211
Change-Id: I767f86e492cddb9cc054c048de7078d2f6b85d33
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Zhuo Wang [Fri, 7 Dec 2018 10:13:56 +0000 (18:13 +0800)]
ethernet: resume/suspend NULL pointer [1/1]
PD#SWPL-3000
Problem:
repeat resume/suspend will NULL pointer
Solution:
use globle var
Verify:
verify in u200
Change-Id: If44e52a5907c85fb181a450af92b18fe37e09d4f
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
tao zeng [Thu, 29 Nov 2018 01:55:14 +0000 (09:55 +0800)]
ddr_bandwidth: support multi-ports config for one channel [1/1]
PD#172256
Problem:
ddr bandwidth prot config can only set 1 port for 1 channel. But
dmc controller support measure many ports on 1 channel.
Solution:
Using bit mask to support multi-ports config for one channel.
Verify:
P212
Change-Id: Iad79e6ebd6aeb74b0e31b3f1bee08de4fd557cc1
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Jian Xu [Thu, 13 Dec 2018 14:57:23 +0000 (22:57 +0800)]
audio: dts: config tdmb/spdif continuous clk to fix spdif no clk issue [1/1]
PD#SWPL-2491
Problem:
HDMI output no sound when system boot up
Solution:
When system bootup,there is no sound,Checked the issue, pcm_write always fail,
cat /d/aml_clkmsr/clkmsr ,[120][ 6000000]audio_spdifout_mst_clk.
the spdif has no clock.Seems after enable same source, the spdifa clock
is not configured correctly. now configure that to continous clock.
TBD, need check the root cause in alsa kernel code.
Verify:
verify by galilei, reboot 20 times.
Change-Id: I0c50c71d2436894d63b83d4040a77a8a9aa6977c
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Kaifu Hu [Fri, 30 Nov 2018 08:00:08 +0000 (16:00 +0800)]
hdmitx: default set frac_rate_policy to 1 [1/1]
PD#SWPL-1955
Problem:
The /sys/class/amhdmitx/amhdmitx0/frac_rate_policy is 0 when
uboot not contain frac_rate_policy
Solution:
Default set frac_rate_policy to 1
Verify:
T962e/R321
Change-Id: Ifff2dbaeef0a3012a730d14405963d994f3eeed3
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Bichao Zheng [Tue, 11 Dec 2018 02:59:09 +0000 (10:59 +0800)]
gpio-led: g12b: add system led control for w400 [2/2]
PD#SWPL-3008
Problem:
g12b_w400 need add led control
Solution:
Add system led control for w400
Verify:
g12b_w400
Change-Id: I7b27af95c92f06bb0ca89e00aeccc65f398dad70
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Cheng Tong [Tue, 11 Dec 2018 09:21:06 +0000 (17:21 +0800)]
dts: add LiveTv support [2/2]
PD#SWPL-3105
Problem:
dts didn't have dvb config
Solution:
add dvb dts config
defalut commented out as reference
Verify:
Verify by Android P franklin
Change-Id: I47ab10c22b32f6bfd51a0c113a692f0c5863178b
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
Zhiwei Yuan [Wed, 12 Dec 2018 12:48:20 +0000 (20:48 +0800)]
dtv_demod: "No signal" is seen when video is playing [1/1]
PD#SWPL-3019
Problem:
Unplug the DTV signal, then do AC off then on, enter DTV source, plug the DTV signal, then change channel, the current channel will display abnormally, the video will display with "no signal" together
Solution:
sync the signal status(using read sts interface) with tuning result
Verify:
verified by T962-P321-DDR4
Change-Id: I3ba01dc976c40391f3f305a3754632d2cccfd571
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Shuyu Li [Wed, 12 Dec 2018 08:25:47 +0000 (16:25 +0800)]
audio: auge: The recorded data L/R channel has 7.5 degree phase diff [1/1]
PD#SWPL-3145
Problem:
The L/R channel has 7.5 degree phase diff
Solution:
Change reg_tdmin_in_rev_ws of EE_AUDIO_TDMIN_X_CTRL 1->0
Verify:
Verify by T962x2_X301 board
Change-Id: I6ca624db10ff96481dd7f413d9f184aeee8c95b3
Signed-off-by: Shuyu Li <shuyu.li@amlogic.com>
shuyu.li [Wed, 28 Nov 2018 11:24:14 +0000 (19:24 +0800)]
audio: codec: add tl1_acodec support for tl1 [1/1]
PD#SWPL-1759
Problem:
add tl1_acodec support
Solution:
add code, update xxx.dts and aml_codec_tl1_acodec.c
Verify:
verify by T962x2_X309 board
Change-Id: Ia91e4e0f113af3d537d1828c5c4cfabc127eac8f
Signed-off-by: shuyu.li <shuyu.li@amlogic.com>
Xing Wang [Tue, 30 Oct 2018 07:38:34 +0000 (15:38 +0800)]
audio: auge: fix drivers for tl1 [1/1]
PD#172587
Problem:
resample, eqdrc, dolby efuse, audio input (from atv, hdmirx)
Solution:
add drivers for them
Verify:
x301
Change-Id: I5187f9824d904283794f6e4be3dd9ce8463908e1
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontl1.dtsi
arch/arm/boot/dts/amlogic/tl1_t962x2_skt.dts
arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts
Zhiwei Yuan [Wed, 12 Dec 2018 07:10:14 +0000 (15:10 +0800)]
dtv_demod: TL1,dtmb,change frequency,show "no signal" at first [1/1]
PD#SWPL-3025
Problem:
Different frequency channel switch, the channel first pops up "no signal" and then displays the channel
Solution:
do dtmb sw reset before re-tune
Verify:
verified by t962x2_x301
Change-Id: Ibc14de37f2f3f6b07af4d125e9fb58dd308e61c4
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Zhiwei Yuan [Thu, 29 Nov 2018 07:20:43 +0000 (15:20 +0800)]
dtv_demod: TL1 timeshift display have a lot mosaic [1/1]
PD#SWPL-2618
Problem:
TL1 timeshift display have a lot mosaic
Solution:
tune ts clk to a smaller value
Verify:
verified by t962x2_x301
Change-Id: I89c8cdb3317e42101fc8f161436d33ccd0761945
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Zhiwei Yuan [Tue, 27 Nov 2018 09:38:34 +0000 (17:38 +0800)]
dtv_demod: for dtmb no signal issue [1/1]
PD#172587
Problem:
for dtmb no signal issue
Solution:
update status to "read status" interface
Verify:
verified by t962x2_x301
Change-Id: I6099d2dbe4dcdc23c3a4bd9e489113b26429f2ec
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Zhiwei Yuan [Fri, 23 Nov 2018 14:33:36 +0000 (22:33 +0800)]
dtv_demod: add DTV demod driver for tl1 [1/1]
PD#172587
Problem:
add DTV demod driver for tl1
Solution:
add DTV demod driver for tl1
Verify:
verified by t962x2_x301
Change-Id: I27e88090aa51c0385867cee4d31a5a75192cf650
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_skt.dts
arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts
Nian Jing [Fri, 23 Nov 2018 12:34:03 +0000 (20:34 +0800)]
tvafe: add tvafe support for tl1 [1/1]
PD#172587
Problem:
tl1 do not support tvafe
Solution:
add tvafe support
Verify:
test pass on x301
Change-Id: I34185a3f10e7540b7c2317c270a306b8904e0ca3
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_skt.dts
arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts
Pengguang Zhu [Fri, 12 Oct 2018 11:46:00 +0000 (19:46 +0800)]
board: get ao_register_base from dts [1/1]
PD#SWPL-3203
Problem:
android P can not boot up on G12A with 32bit kernel
Solution:
get register base from dts
Verify:
Local
Change-Id: Ifb3163a867c1c8ed4f8c344d064cead216334773
Signed-off-by: Pengguang Zhu <pengguang.zhu@amlogic.com>
keke.li [Tue, 27 Nov 2018 05:54:21 +0000 (13:54 +0800)]
gdc: add a convert function to map dma address [1/1]
PD#SWPL-2157
Problem:
gdc module need to get dma address directly
Solution:
add a convert function to map dma address
Verify:
g12b
Change-Id: I1d40350e4727335d1f69f38caafb1dfe7b0db842
Signed-off-by: Keke Li <keke.li@amlogic.com>
Tao Zeng [Wed, 12 Dec 2018 06:37:26 +0000 (14:37 +0800)]
mm: fix suspend crash on u200 [1/1]
PD#SWPL-1219
Problem:
When open vmap stack, suspend will fail on U200. If open cpu idle,
resume from idle will fail too.
Solution:
set up vmap stack early before open IRQ. If set up this stack late
than IRQ open, stack will point to a ramdom address
Verify:
u200
Change-Id: Ie60f6faadf9afece47ccc887a0af46814f070897
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Jiamin Ma [Wed, 12 Dec 2018 09:37:01 +0000 (17:37 +0800)]
debug: show pfn info when undefined instr happens at user space [1/1]
PD#SWPL-3076
Problem:
Lack of debug infos when undefined instr happens at user space
Solution:
Call show_all_pfn when undefined instr happens at user space
Verify:
Locally on ampere
Change-Id: Id24e797c2781c94c507ad07ec17a3d4ae7d44cd9
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
he.he [Tue, 20 Nov 2018 05:57:37 +0000 (13:57 +0800)]
usb: adb panic [1/1]
PD#SWPL-2678
Problem:
adb panic in release_ffs_buffer
Solution:
1.when kzalloc data_ep use GFP_ATOMIC instead of GFP_KERNEL
and keep spin lock protection.
2.check buffer_temp->data_ep == NULL, return
Test: adb push
Verify:
verified by he he
Change-Id: I3402b17d62b8a0ef4e3185a87729a0c3e87449e9
Signed-off-by: he.he <he.he@amlogic.com>
Bencheng Jing [Thu, 6 Dec 2018 08:53:17 +0000 (16:53 +0800)]
pq: fix sr registers load fail on txl [1/1]
PD#SWPL-2941
Problem:
sr top ctrl is closed when video off
Solution:
txl and txl sr top don't close
Verify:
TxL
Change-Id: Ia8e7e3bd93dd328497af66cf9758e3021cafe22c
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
tao zeng [Wed, 7 Nov 2018 08:51:50 +0000 (16:51 +0800)]
mm: optimize stack usage for functions [1/1]
PD#SWPL-1773
Problem:
After adding optimization of vmap stack, we can found stack usage
of each functions when handle vmap fault. From test log we see some
functions using large stack size which over 256bytes. Especially
common call path from fs. We need to optimize stack usage of these
functions to reduce stack fault probability and save stack memory
usage.
Solution:
1. remove CONFIG_CC_STACKPROTECTOR_STRONG and set STACKPROTECTOR to
NONE. This can save stack usage add by compiler for most functions.
Kernel code size can also save over 1MB.
2. Add some noinline functions for android_fs_data rw trace calls. In
these trace call it allcated a 256 bytes local buffer.
3. Add a wrap function for mem abort handler. By default, it defined a
siginfo struct(size over 100 bytes) in local but only used when fault
can't be handled.
4. reduce cached page size for vmap stack since probability of page
fault caused by stack overflow is reduced after function stack usage
optimized.
Monkey test show real stack usage ratio compared with 1st vmap
implementation reduced from 35% ~ 38% to 26 ~ 27%. Which is very
close to 25%, theory limit.
Verify:
P212
Change-Id: I5505cacc1cab51f88654052902852fd648b6a036
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Pengcheng Chen [Tue, 11 Dec 2018 09:23:43 +0000 (17:23 +0800)]
osd: remove phys_to_vir to prevent crash on the 32bit & 2G boadr [1/1]
PD#SWPL-3079
Problem:
phys_to_vir in height mem rw caused crashed.
Solution:
remove phys_to_vir(dd funs not work)
Verify:
tl1
Change-Id: Ic9679471a51974cabf84b61efe90c88e845d01ea
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Hongmin Hua [Tue, 11 Dec 2018 06:03:04 +0000 (14:03 +0800)]
cec: add the port map for connect status [1/1]
PD#SWPL-3010
Problem:
the arc can't work
Solution:
add the port map for connect status
Verify:
verified on darwin
Change-Id: I9f886c35de8670acdc431185bb26aa1836a8c150
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
Yi Zeng [Mon, 10 Dec 2018 07:57:18 +0000 (15:57 +0800)]
nand: fix the free-node leak in rsv manager [1/1]
PD#SWPL-2776
Problem:
did not release the free node of rsv information
Solution:
release free node and set bit mask in right way
Verify:
S400
Change-Id: I781f2374b91ca1e7cd1a66e75fc554318737c377
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Jian Cao [Fri, 7 Dec 2018 09:46:36 +0000 (17:46 +0800)]
video: fix picdec coverity error [1/1]
PD#SWPL-2797
Problem:
fix picdec coverity error
Solution:
solve picdec coverity issues
Verify:
verified on P212
Change-Id: Iee0a7beb3fbf8382e9dd4207075df85171ed62ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Thu, 6 Dec 2018 14:56:27 +0000 (22:56 +0800)]
video: fix ppmgr coverity error [1/1]
PD#SWPL-2797
Problem:
fix ppmgr coverity error
Solution:
solve ppmgr coverity issues
Verify:
verified on P212
Change-Id: I05b837073ec9c981004320afaa0680648198d5b3
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Fri, 7 Dec 2018 09:52:12 +0000 (17:52 +0800)]
osd: fix ge2d coverity error [1/1]
PD#SWPL-2798
Problem:
fix ge2d coverity error
Solution:
add return val timeout for waiting completion
Verify:
verified on P212
Change-Id: Iaacf3f5b30721eb5d72d3c355f0404f4848969b5
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Thu, 6 Dec 2018 08:07:41 +0000 (16:07 +0800)]
osd: fix osd coverity error [1/1]
PD#SWPL-2798
Problem:
fix osd coverity error
Solution:
solve osd coverity issues
Verify:
verified on P212
Change-Id: I9714e3b229786d39ffa5a150633d59082bdf3549
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
MingLiang Dong [Tue, 11 Dec 2018 10:37:04 +0000 (05:37 -0500)]
hdr: Enable default output to HDR for HDR TV [1/1]
PD#SWPL-3096
Problem:
G12A/G12B need enable sdr2hdr
Solution:
enable sdr2hdr function
Verify:
verify on G12A
Change-Id: I1e771a13d33fe675cfc36d8308afc37077545cd4
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
nengwen.chen [Mon, 12 Nov 2018 12:44:35 +0000 (20:44 +0800)]
dtv_demod: DTV search menu does not have ISDB-T entry [4/6]
PD#SWPL-1664
Problem:
DTV search menu does not have ISDB-T entry
Solution:
add ISDB-T system support.
Verify:
verified by einstein
Change-Id: Ie0bdc988d53256487e24c3123320b50f2a58cdf3
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Chuangcheng Peng [Fri, 7 Dec 2018 10:16:13 +0000 (18:16 +0800)]
dvb-core: compatile with 32bit in 64bit kernel [1/1]
PD#SWPL-3009
Problem:
32bit frontend app can't call ioctl in 64bit-kernel
Solution:
Add 32bit define in header and handle in dvb_frontend in 64bit-kernel
Verify:
Verify at android_p at R311
Change-Id: I63178803cfb1cf7d670e3c2b55f104e97f5afa63
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
tao zeng [Tue, 20 Nov 2018 04:14:57 +0000 (12:14 +0800)]
mm: check phys_to_xxxx macro on 32bit OS [1/1]
PD#SWPL-1909
Problem:
If physical address of a memory location is not in linear mapping
range, then any caller with phys_to_xxxx to get a pointer will
cause bug.
Solution:
Check input address range for phys_to_xxxx to get a BUG output.
This change is used for debug
Verify:
P212
Change-Id: I13bcaa3983e2d730b8d2bc03cd28c62585f49969
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
qiu.zeng [Fri, 7 Dec 2018 02:49:08 +0000 (10:49 +0800)]
BT: resolve bt remote re-connected fail [1/1]
PD#SWPL-2735
Problem:
bt remote re-connected fail
Solution:
control bluetooth opwer up
Verify:
Verifying on Public Edition r311
Change-Id: I8c74442894f606d5afd992e52d6c80bada0aed9f
Signed-off-by: Qiu Zeng <qiu.zeng@amlogic.com>
Brian Zhu [Fri, 7 Dec 2018 06:21:43 +0000 (14:21 +0800)]
video: sr: add the missing bit mask for sr core1 [1/1]
PD#SWPL-2948
Problem:
Miss the sr core1 bit mask to cause display abnormal
Solution:
Add the bit mask for sr core1
Verify:
Test pass by x301
Change-Id: I742d86b610a9748adad7c143d7a85c6796d3c8f7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Tao Zeng [Thu, 6 Dec 2018 07:24:44 +0000 (15:24 +0800)]
mm: subtract CMA isolated pages when allocate TVP [1/1]
PD#SWPL-2933
Problem:
When allocate CMA pages in buildroot enverioment, system will
hung in congestion_wait:
Call trace:
[<
ffffff8009086a78>] __switch_to+0xa0/0xc8
[<
ffffff8009de3eb8>] __schedule+0x268/0x7d8
[<
ffffff8009de4464>] schedule+0x3c/0xa0
[<
ffffff8009de7c9c>] schedule_timeout+0x1b4/0x448
[<
ffffff8009de3be8>] io_schedule_timeout+0x98/0x100
[<
ffffff80091e3fb8>] congestion_wait+0x90/0x190
[<
ffffff80091ebcf4>] isolate_migratepages_block+0x7ec/0x890
[<
ffffff80091ec794>] isolate_migratepages_range+0x8c/0x100
[<
ffffff8009a8f34c>] aml_alloc_contig_migrate_range+0x104/0x158
[<
ffffff8009a8f518>] cma_boost_work_func+0x178/0x270
[<
ffffff80090cc228>] kthread+0xf8/0x110
[<
ffffff80090836c0>] ret_from_fork+0x10/0x50
Solution:
subtract isolated CMA pages when allocation large CMA for TVP.
Verify:
local
Change-Id: I96153cf104abb009a8965c2230a5242e495dd031
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
pengcheng chen [Mon, 26 Nov 2018 12:14:26 +0000 (20:14 +0800)]
osd: fix afbc dd length error issue [1/1]
PD#SWPL-2674
Problem:
fix afbc dd length error issue
Solution:
add afbc_len to set screen_size
Verify:
verified on g12a-u200
Change-Id: I00df7945f0f928efe2b8be88c56f10f20bb1700f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Hongmin Hua [Fri, 30 Nov 2018 07:55:59 +0000 (15:55 +0800)]
cec: set the phy port the same as ui id [2/2]
PD#SWPL-2685
Problem:
the atom switch wrong channel when wakeup by device
Solution:
set the phy port the same as ui id
Verify:
atom
Change-Id: I4e43f83af5bb30a2388df7e7030f135c3f0830ad
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
Jian Hu [Wed, 5 Dec 2018 08:48:19 +0000 (16:48 +0800)]
clk: g12a: add gen clock [1/1]
PD#OTT-1025
Problem:
not support gen clock
Solution:
add gen clock
Verify:
test passed on g12a u200
Change-Id: I5199289d3cd1483fffbbd41f8d104369214ba302
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Xingyu Chen [Wed, 5 Dec 2018 11:13:21 +0000 (19:13 +0800)]
pinctrl: meson: add gen_clk_ee/ao pin groups for G12A/B [1/1]
PD#OTT-1025
Problem:
don't support gen_clk_ee and gen_clk_ao pin groups
Solution:
add gen_clk_ee/ao pin groups according to the corepinmux document
Verify:
test pass on U200
Change-Id: Ia3e61079def285c482d8dc4957b5f9e7db35847d
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
tao zeng [Mon, 15 Oct 2018 07:20:38 +0000 (15:20 +0800)]
mm: optimize thread stack usage on arm64 [1/1]
PD#SWPL-1219
Problem:
On arm64, thread stack is 16KB for each task. If running task number
is large, this type of memory may over 40MB. It's a large amount on
small memory platform. But most case thread only use less 4KB stack.
It's waste of memory and we need optimize it.
Solution:
1. Pre-allocate a vmalloc address space for task stack;
2. Only map 1st page for stack and handle page fault in EL1
when stack growth triggered exception;
3. handle stack switch for exception.
Verify:
p212
Change-Id: I47f511ccfa2868d982bc10a820ed6435b6d52ba9
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Jihong Sui [Tue, 4 Dec 2018 09:51:39 +0000 (17:51 +0800)]
deinterlace: deinterlace: fix coverity error [1/1]
PD#SWPL-2863
Problem:
cdev_add without checking return value.
Solution:
add check
Verify:
p212
Change-Id: Ib1d96f6e5ee07dd28f67eb4ee77acb6580a1f877
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Tue, 4 Dec 2018 09:25:29 +0000 (17:25 +0800)]
deinterlace: deinterlace: set post_ctrl when no mirror [1/1]
PD#SWPL-1076
Problem:
Kplayer 4KDemo.mp4, show green screen.
Solution:
add DI_IF1_GEN_REG set when no mirror
Verify:
p212
Change-Id: I2cfb27068393832fb47498ebdb9b93349f1fe635
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Pengcheng Chen [Wed, 5 Dec 2018 05:45:55 +0000 (13:45 +0800)]
osd: add osd log module control [2/2]
PD#SWPL-2551
Problem:
add osd log module control
Solution:
add osd log module control
Verify:
verified on P212
Change-Id: Iadbf795cb7afe4ddcab0f9283b9c7f542eca0b29
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Jian Cao [Wed, 5 Dec 2018 07:31:30 +0000 (15:31 +0800)]
osd: range of mouse is wrong under 4K mode [1/2]
PD#SWPL-2551
Problem:
range of mouse is wrong under 4K mode
Solution:
new cursor coordinate paras without using scale
add osd_cursor_hw_no_scale() to deal with it.
Verify:
verified on P212
Change-Id: I1748df569b96522eb58dc00af862983bca17815a
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Tao Guo [Sun, 4 Nov 2018 03:22:49 +0000 (03:22 +0000)]
media: add get free handle cmd [4/9]
PD#SWPL-1081
Problem:
Need get freed handle for DRM frame mode
Solution:
Add ioctl cmd to get freed handle
Verify:
P212
Change-Id: Ic0ce64061e334fdea5580d9f92b3e0b58caa88eb
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
Evoke Zhang [Fri, 23 Nov 2018 13:55:44 +0000 (21:55 +0800)]
lcd: mipi_dsi: update clk_post timing for dphy [1/1]
PD#SWPL-2436
Problem:
sometime the dphy clk_post is not match spec
Solution:
update clk_post config
Verify:
w400
Change-Id: Ib6b585f833bf923e72109991509915f4ad35d316
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Zongdong Jiao [Thu, 29 Nov 2018 11:00:46 +0000 (19:00 +0800)]
hdmitx: parse colorattribute from uboot [2/2]
PD#SWPL-2181
Problem:
For some Rx, if the Tx cold boots up, the HPD can't be got in uboot.
That is to say, the output mode is CVBS in uboot, even HDMI cable is
connected. And during kernel boots up, it will reset to hdmi mode.
During the Android boots up, it will set to hdmi mode again. Twice
hdmi mode setting may cause TV flicks.
Solution:
Add parsing colorattribute from uboot and assign $attr to prevent
the second Android mode setting.
Verify:
S905X/P212
Change-Id: I665227bc3e8481acb40c34dde2f5cb3c633c64a2
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
bichao.zheng [Thu, 29 Nov 2018 12:25:10 +0000 (20:25 +0800)]
arm: dts: fix wifi 32K Frequency offset [2/2]
PD#SWPL-2623
Problem:
wifi 32K Frequency offset too large
Solution:
Modification cycle
Verify:
x301
Change-Id: I04724b0eacdffc1760b67689be373cb8f671a125
Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts
bichao.zheng [Thu, 29 Nov 2018 12:19:57 +0000 (20:19 +0800)]
arm64: dts: fix wifi 32K Frequency offset [2/1]
PD#SWPL-2623
Problem:
wifi 32K Frequency offset too large
Solution:
Modification cycle
Verify:
axg u211 p321 r311 p212
Change-Id: Ica04bec99ba2097918387a980b94dc007bb4eca4
Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com>
Jihong Sui [Wed, 28 Nov 2018 07:06:15 +0000 (15:06 +0800)]
deinterlace: reduce the screen flash when fast forward [1/1]
PD#SWPL-2188
Problem:
1.fast forward/rewind operation, the screen flashes
Solution:
1.add function to update MCDI_MCVECRD_CTRL[9]
Verify:
1.txl
Change-Id: I1bf8583901fa49c518cca74e7716632447adf32f
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jian Hu [Mon, 3 Dec 2018 09:05:10 +0000 (17:05 +0800)]
clk: gxl: correct saradc clock id when check sardadc clock [1/1]
PD#OTT-944
Problem:
saradc check the wrong clock id.
Solution:
correct saradc id.
Verify:
verified on P212 board
Change-Id: I7fdde80c21228e45ec165252549bf4ca5f21bd67
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Daogao Xu [Fri, 30 Nov 2018 06:30:56 +0000 (14:30 +0800)]
video: add fast and slow playback support [1/1]
PD#SWPL-1690
Problem:
YouTube requires support playback rate 0.25, 0.50, 1.00, 1.25, 1.50,
2.00
Solution:
vsync_slow_factor can be used to slow playback, extend it's value to
support fast playback
Verify:
mesongxl_p212_32_kernel49
Change-Id: I94589a210b8531cc198414b3017c3caf82827565
Signed-off-by: Daogao Xu <daogao.xu@amlogic.com>
wenfeng.guo [Fri, 23 Nov 2018 09:38:00 +0000 (17:38 +0800)]
vpp: fix vpp covertiy error [1/1]
PD#SWPL-2458
Problem:
vpp has covertiy error
Solution:
fix vpp covertiy error
Verify:
r311
Change-Id: Ic755420107b72fa0a56d73e288b708ab421f7609
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Jiacheng Mei [Mon, 26 Nov 2018 11:46:44 +0000 (19:46 +0800)]
dts: reduce isp memory usage [1/1]
PD#SWPL-2512
Problem:
isp reserved mem too large
Solution:
reduce isp mem to 256M
Verify:
A311D-W400
Change-Id: I33ee2872daf961da5f0ba4ba4810b0ac9690e45f
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
Bencheng Jing [Fri, 23 Nov 2018 08:17:59 +0000 (16:17 +0800)]
amvecm: fix dnlp read scurv_mid2 debug interface error [1/1]
PD#SWPL-2448
Problem:
can not read dnlp scurv_mid2 value
Solution:
fix the error
Verify:
t962x_r311
Change-Id: I7a7df769dd117fd83164065f6df8e3ae82c2499f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Guosong Zhou [Thu, 22 Nov 2018 13:33:58 +0000 (08:33 -0500)]
picdec: add mmap interface for picdec [2/2]
PD#SWPL-2280
Problem:
play picture crash
Solution:
add mmap interface for picdec
Verify:
verify by p321
Change-Id: Ib278de80035b0404884315e29fe933cd8f4b6cfe
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Zhongfu Luo [Thu, 13 Dec 2018 09:06:23 +0000 (17:06 +0800)]
dts: GXL: defendkey: modify reserve memory mode [2/2]
PD#SWPL-2100
Problem:
GXL need to modify reserve memory mode
Solution:
remove defendkey reserved memory in GXL dts
Verify:
GXL skt board verify pass
Change-Id: Ie5ed01c6dd8f88c5594d6bc73f13282e535071a2
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhongfu Luo [Fri, 7 Dec 2018 12:14:50 +0000 (20:14 +0800)]
dts: G12B: defendkey: support secure upgrade check [3/3]
PD#SWPL-2348
Problem:
G12B need to support secure upgrade check
Solution:
add defendkey support in all G12B dts
Verify:
G12B skt board verify pass
Change-Id: I2c3f51e761531cf2169dda483991b3d876039686
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zongdong Jiao [Thu, 13 Dec 2018 05:31:27 +0000 (13:31 +0800)]
hdmitx: fix a resmue panic isse [1/1]
PD#SWPL-3188
Problem:
When HDMI cable is not connected(that is CVBS out), and system
may be panic after resume.
Solution:
Add NULL pointer protection check
Verify:
P212
Change-Id: I60818faaf7049667501e31990fa557b754ea7f1b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Nian Jing [Mon, 22 Oct 2018 08:36:28 +0000 (16:36 +0800)]
media: video: fix cvbs black dot issue [1/1]
PD#SWPL-1910
Problem:
Black dot on cvbsout when local play 4k
Solution:
Set limit rang when vpp output yuv for cvbs
Verify:
test pass on u200/s905x
Change-Id: Ia3e93078eb1a00d8c974bae8cc373a3a679f8b9f
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yi Zhou [Mon, 26 Nov 2018 05:35:04 +0000 (13:35 +0800)]
hdmitx: add parsing for non-standard dv edid [1/1]
PD#SWPL-1968
Problem:
some error edid need to be parsed
Solution:
add parsing for non-standard dv edid
Verify:
t962e (txlx)
Change-Id: Ia952ed59650fd0b1c665ca03175a38c1cf3ae5bb
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Bo Yang [Sat, 3 Nov 2018 02:22:02 +0000 (10:22 +0800)]
arm: dts: gxl: replace watchdog with new version [1/1]
PD#SWPL-1600
Problem:
The current watchdog is not the upstream standard driver.
Solution:
Replace watchdog device tree to use the standard watchdog driver.
Verify:
S905X P215/P212 Android-32bit Kernel-32bit.
Change-Id: I972c8ebb0158caa2df393d9a2d687d9298181102
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
watchdog: Change the feed watchdog mode [1/1]
PD#SWPL-2378
Problem:
Using Android to feed watchdog is not easy to debug the
crash problem, in addition, the Android does not open
the dog feeding service.
Solution:
Change the DTS configuration and change into driver feed watchdog.
Verify:
test pass on g12a-u200
Change-Id: Ie0a91fd8451fdccf3038ba6290a277c9048c52cd
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Ruixuan Li [Mon, 3 Dec 2018 07:21:30 +0000 (15:21 +0800)]
emmc: modify device node name [1/1]
PD#SWPL-2719
Problem:
Can't idetify correctlly when move disk have multi
partition
Solution:
Remove the function of using the partition name as
the device node name
Verify:
test pass on tl1 ref board
Change-Id: I113e63f209c529149fb94b0bb10b0b254717c2bf
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Zhongfu Luo [Fri, 7 Dec 2018 09:36:14 +0000 (17:36 +0800)]
dts: G12A: defendkey: support secure upgrade check [4/4]
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
add defendkey support in all G12A dts
Verify:
G12A skt board verify pass
Change-Id: I7343c2c553dfe776eefcfff9ab3a270c87014118
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhongfu Luo [Fri, 7 Dec 2018 09:26:52 +0000 (17:26 +0800)]
defendkey: G12A: support secure upgrade check [3/4]
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
1.modify reserve memory mode
2.only use cpu0 in defendkey write process
Verify:
G12A skt board verify pass
Change-Id: Iad771381e959a79dcba7a0adb862295fa5ba5dee
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Luan Yuan [Sat, 8 Dec 2018 04:30:03 +0000 (12:30 +0800)]
Revert "arm: dts: gxl: replace watchdog with new version [1/1]"
This reverts commit
d932cb0022d9daeede4eb78f19b2d36c2cb9fab6.
Tao Guo [Wed, 5 Dec 2018 06:39:36 +0000 (06:39 +0000)]
codec_mm: show current tvp flag [1/2]
PD#OTT-937
Problem:
When kill mediacodec during playing drm, tvp memory not be freed
Solution:
Check tvp flag in kernel, free tvp memory if flag is not zero
Verify:
P212
Change-Id: I35cbb2808bf179710ec59bd5227995949946ee77
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
Yi Zhou [Wed, 5 Dec 2018 06:21:03 +0000 (14:21 +0800)]
dv: fix the error hsize and vsize of dv core 2 [1/1]
PD#OTT-776
Problem:
dv core 2 get the error hsize and vsize from OSD module
Solution:
when opening 3 osd paths. we get the accurate the parameters again
Verify:
g12b s922
Change-Id: Ib6af084910c8cf1896060295c7cea75971cd86b6
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Jiamin Ma [Thu, 6 Dec 2018 07:26:57 +0000 (15:26 +0800)]
dts: fdto: the fdt is damaged in booting process [1/1]
PD#SWPL-2960
Problem:
If the overlay dts refers to a node which does not exist in the base
device tree, the final fdt will be in a damaged state after doing fdt
overlay
Solution:
Use the standard overlay dts syntax to note node to be applied instead
of the google recommended one
Verify:
Locally on P230
Change-Id: Ibf45abff1348437bc3fc2745e6d955cc8292db46
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Jianxiong Pan [Thu, 22 Nov 2018 02:59:25 +0000 (10:59 +0800)]
fdto: peripheral driver support dtbo [2/4]
PD#SWPL-2193
Problem:
Node dummy-battery and dummy-charger are android version
dependent, and should be "fdt overlayed"
Solution:
Add fdt overlay file android_p_overlay_dt.dts, and configure
dummy-battery and dummy-charger in it
Verify:
Locally on P212 and R311
Change-Id: I75a27a0ad1253556cae5273f36e0eb828291fd73
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
jiamin ma [Thu, 22 Nov 2018 01:34:44 +0000 (09:34 +0800)]
fdto: peripheral driver support dtbo [1/4]
PD#SWPL-2193
Problem:
We cannot compile dtbo file in a way like
make ARCH=arm foo.dtbo
Solution:
Add dtbo target and reuse the dtb rules
Verify:
Locally verifed
Change-Id: I34b88e61b409defe553cf5ed1077c160b9a6f350
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Rob Herring [Tue, 3 Oct 2017 16:37:04 +0000 (11:37 -0500)]
scripts/dtc: Update to upstream version v1.4.5-3-gb1a60033c110
PD#SWPL-2193
This adds the following commits from upstream:
b1a60033c110 tests: Add a test for overlays syntactic sugar
737b2df39cc8 overlay: Add syntactic sugar version of overlays
497432fd2131 checks: Use proper format modifier for size_t
22a65c5331c2 dtc: Bump version to v1.4.5
c575d8059fff Add fdtoverlay to .gitignore
b6a6f9490d19 fdtoverlay: Sanity check blob size
8c1eb1526d2d pylibfdt: Use Python2 explicitly
ee3d26f6960b checks: add interrupts property check
c1e7738988f5 checks: add gpio binding properties check
b3bbac02d5e3 checks: add phandle with arg property checks
fe50bd1ecc1d fdtget: Split out cell list display into a new function
62d812308d11 README: Add a note about test_tree1.dts
5bed86aee9e8 pylibfdt: Add support for fdt_subnode_offset()
46f31b65b3b3 pylibfdt: Add support for fdt_node_offset_by_phandle()
a3ae43723687 pylibfdt: Add support for fdt_parent_offset()
a198af80344c pylibfdt: Add support for fdt_get_phandle()
b9eba92ea50f tests: Return a failure code when any tests fail
155faf6cc209 pylibfdt: Use local pylibfdt module
50e5cd07f325 pylibfdt: Add a test for use of uint32_t
ab78860f09f5 pylibfdt: Add stdint include to fix uint32_t
36f511fb1113 tests: Add stacked overlay tests on fdtoverlay
1bb00655d3e5 fdt: Allow stacked overlays phandle references
a33c2247ac8d Introduce fdt_setprop_placeholder() method
0016f8c2aa32 dtc: change default phandles to ePAPR style instead of both
e3b9a9588a35 tests: fdtoverlay unit test
42409146f2db fdtoverlay: A tool that applies overlays
aae22722fc8d manual: Document missing options
13ce6e1c2fc4 dtc: fix sprintf() format string error, again
d990b8013889 Makefile: Fix build on MSYS2 and Cygwin
51f56dedf8ea Clean up shared library compile/link options
21a2bc896e3d Suppress expected error message in fdtdump test
2a42b14d0d03 dtc: check.c fix compile error
a10cb3c818d3 Fix get_node_by_path string equality check
548aea2c436a fdtdump: Discourage use of fdtdump
c2258841a785 fdtdump: Fix over-zealous version check
9067ee4be0e6 Fix a few whitespace and style nits
e56f2b07be38 pylibfdt: Use setup.py to build the swig file
896f1c133265 pylibfdt: Use Makefile constructs to implement NO_PYTHON
90db6d9989ca pylibfdt: Allow setup.py to operate stand-alone
e20d9658cd8f Add Coverity Scan support
b04a2cf08862 pylibfdt: Fix code style in setup.py
1c5170d3a466 pylibfdt: Rename libfdt.swig to libfdt.i
580a9f6c2880 Add a libfdt function to write a property placeholder
ab15256d8d02 pylibfdt: Use the call function to simplify the Makefile
9f2e3a3a1f19 pylibfdt: Use the correct libfdt version in the module
e91c652af215 pylibfdt: Enable installation of Python module
8a892fd85d94 pylibfdt: Allow building to be disabled
741cdff85d3e .travis.yml: Add builds with and without Python library prerequisites
14c4171f4f9a pylibfdt: Use package_dir to set the package directory
89a5062ab231 pylibfdt: Use environment to pass C flags and files
4e0e0d049757 pylibfdt: Allow pkg-config to be supplied in the environment
6afd7d9688f5 Correct typo: s/pylibgfdt/pylibfdt/
Change-Id: Ib23ca90f1e34ed85db3aae9d223fc921e6f2114e
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Jihong Sui [Wed, 28 Nov 2018 08:23:05 +0000 (16:23 +0800)]
deinterlace: there's a change to hang in shutdown [1/1]
PD#OTT-778
Problem:
1.kernel received reboot command, but hang in shutdown
Solution:
move tasklet_disable behind tasklet_kill
Verify:
P321
Change-Id: I994c21c5aeb42dbbb4e3b50ccac8376db4d4039d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Conflicts:
drivers/amlogic/media/deinterlace/deinterlace.c
pengcheng chen [Mon, 3 Dec 2018 06:09:00 +0000 (14:09 +0800)]
osd: call osd_update_enable directly if osd cursor [1/1]
PD#SWPL-2744
Problem:
osd mouse can't see before platform g12a
Solution:
call osd_update_enable directly if osd cursor
Verify:
verify by p212
Change-Id: Ia8488a5bd0f707de2a02aa2b74e4a07582ef7f60
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
pengcheng chen [Thu, 29 Nov 2018 06:00:10 +0000 (14:00 +0800)]
osd: adjust free_scale_dst if interlaced [1/1]
PD#SWPL-2600
Problem:
osd display half menu when in 1080i
Solution:
osd: adjust free_scale_dst if interlaced
Verify:
verify by p212
Change-Id: Ie9faffbb5942faa317b380ca0cdbee072a30c01f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Brian Zhu [Wed, 28 Nov 2018 15:57:40 +0000 (23:57 +0800)]
video: vpp: add more check for vd1 postblend in vpp_misc [1/2]
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
add more check for vd1 postblend bit in vsync
Verify:
verify by p212
Change-Id: I367e920c13764af41446d7d759aaf8388fb08722
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
pengcheng chen [Thu, 29 Nov 2018 02:37:51 +0000 (10:37 +0800)]
osd: call osd_update_enable if needed [2/2]
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
osd: call osd_update_enable if needed
Verify:
verify by p212
Change-Id: I438848dc843ea370d65dc3c6b4befb32d1f2b5f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Jian Cao [Thu, 29 Nov 2018 08:04:01 +0000 (16:04 +0800)]
osd: osd: a black line below the screen when play video [1/1]
PD#SWPL-2558
Problem:
a black horizontal line below the screen when play video
Solution:
set dummy data alpha
Verify:
verified on p321
Change-Id: I36dc924b9bc89f4f8ea61eb86c6f5bc9199e40ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
huaihao.guo [Fri, 23 Nov 2018 02:31:02 +0000 (10:31 +0800)]
deinterface: temporary remove afbc support on chip after g12a [1/1]
PD#172587
Problem:
afbc now support on chip txlx and g12a,
but we use cpu_after_eq(G12A) to judge
if afbc is support or not.
Solution:
use is_meson_g12a_cpu() replace cpu_after_eq(G12A).
Verify:
u200(g12a),t962x_r311
Change-Id: I3fb7ed54f7137fada97481177e40a2543cf8df9f
Signed-off-by: huaihao guo <huaihao.guo@amlogic.com>
qi duan [Tue, 20 Nov 2018 08:23:04 +0000 (16:23 +0800)]
dvb: tuner: USB DVB tuner support from Google
PD#SWPL-932
Problem:
USB DVB Dongle search program Function is not implemented
Solution:
merge usb dvb tuner from kernel3.14
http://10.8.9.5/kernel/common/commit/?h=amlogic-3.14-dev&id=
7af9c5c38efdc96f5d3235f17788232a630b3d32
fixed frontend.h structures
Verify:
Ampere P
Change-Id: I16d68c2507711eda43313619d210d05699abcc25
Signed-off-by: qi duan <qi.duan@amlogic.com>
Yinming Ding [Wed, 28 Nov 2018 03:04:24 +0000 (11:04 +0800)]
frame_sync: fix last few seconds of the DD+ stream are not smooth [4/4]
PD#SWPL-714
Problem:
The last few seconds of the DD+ stream are not smooth by DTV playback.
Solution:
check the apts and vpts both discontinue,then replay the stream.
Verify:
P321
Change-Id: I6cbbdecc052dfe9fef76b44f36545b231332ee12
Signed-off-by: Yinming Ding <yinming.ding@amlogic.com>
Sandy Luo [Wed, 28 Nov 2018 07:16:57 +0000 (15:16 +0800)]
dts: fix SD card read issue for g12a board [2/3]
PD#SWPL-2588
Problem:
g12a u220/u221 boad cann't read SD card
Solution:
auto detect revA and revB chip
Verify:
test pass on u220/u221 board
Change-Id: Ia153bb3f966fe2a58d5f3ed1bf1d3f610d00ff5a
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Peng Yixin [Fri, 12 Oct 2018 06:18:04 +0000 (14:18 +0800)]
display: Modify the value of register afbc_gclk_ctrl [1/1]
PD#SWPL-2565
Problem:
The splash screen problem for first frame after starting up.
Solution:
Modify the value of register afbc_gclk_ctrl.
Verify:
u211
Change-Id: Ie1ddfade0566ff8cd571c43ba8490a8c277a8758
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
Yi Zhou [Tue, 27 Nov 2018 02:31:16 +0000 (10:31 +0800)]
dv: fix the flickered problem [1/1]
PD#SWPL-1207
Problem:
fix the filckered problem when playing transition
video in sdr tv
Solution:
when dv core2 don't run, the reset can't be executed
Verify:
r321
Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Kaifu Hu [Thu, 22 Nov 2018 10:55:48 +0000 (18:55 +0800)]
hdmitx: disable encryption hdcp1.4 fail [1/1]
PD#SWPL-2302
Problem:
Play online video,half an hour later, the TV shows
a pink screen and the sound is normal.
Solution:
Check hdcp1.4 status and disable encryption when fail.
Verify:
S922X
Change-Id: I6ce51824726b267d140750f9e9d80aa8bb921cac
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Yong Qin [Wed, 21 Nov 2018 08:00:23 +0000 (16:00 +0800)]
cec: auto shutdown case crash [1/1]
PD#SWPL-2258
Problem:
1.running autoshutdown cause device crashed
Solution:
1.optimize cec power on proble flow
Verify:
1.p212
Change-Id: Ia78c76cdb4b72a1a275628b3ad77ea6d71696d89
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
hongmin hua [Wed, 14 Nov 2018 13:50:26 +0000 (21:50 +0800)]
cec: update cec platform data for tl1 [1/1]
PD#172587
Problem:
the line check always return low.
the print of check too much.
Solution:
modify the cec gpio from 7 to 10.
modify the check line.
Verify:
tl1 x301 board
Change-Id: I09ae5eee455d83e51e65957cd293e07da1c0046a
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Yong Qin [Mon, 12 Nov 2018 03:38:33 +0000 (11:38 +0800)]
cec: add device match for tl1 [1/1]
PD#172587
Problem:
add device match for tl1
Solution:
1.add cecb ver
2.add ceca status reg flag
Verify:
1.run TPM
2.run chip
Change-Id: I304abfd1d6f1f216f9f0c56ca19a8bdb2ccfeabb
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Chaomin Zheng [Mon, 26 Nov 2018 10:29:18 +0000 (18:29 +0800)]
DTS: p230 board config spdif out pin [3/3]
PD# SWPL-1223
Problem:
p230 board spdif out no audio sound
Solution:
config p230 board spdif out pin
Verify:
verify on p230
Change-Id: I0c35e6d526aab98955206f78322fcc873ff01b8c
Signed-off-by: Chaomin Zheng <chaomin.zheng@amlogic.com>
Zhongfu Luo [Tue, 27 Nov 2018 05:55:10 +0000 (13:55 +0800)]
dts: GXL/TXL: adjust defendkey_reserved location [1/1]
PD#SWPL-2539
Problem:
defendkey_reserved have influenced on display
during the system boot up
Solution:
adjust defendkey_reserved node location
Verify:
GXL/TXL skt board verify pass
Change-Id: I5cf0245f9653e20224c4e3bab1f6f05527011210
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
xiaoming.sui [Tue, 27 Nov 2018 03:12:23 +0000 (11:12 +0800)]
media: media_sync: remove serial port debug logs [1/1]
PD#SWPL-2494
Problem:
serial port always print timestamp log
Solution:
remove this log output
Verify:
P321
Change-Id: I875dffab483269374b9939f556a3ed01e9d2b215
Signed-off-by: xiaoming.sui <xiaoming.sui@amlogic.com>
wenfeng.guo [Tue, 20 Nov 2018 11:38:43 +0000 (19:38 +0800)]
deinterlace: fix CMA layout adaptation di_cma_reserved [1/1]
PD#SWPL-2308
Problem:
CMA layout adaptation di_cma_reserved cause crash
Solution:
fix CMA layout adaptation di_cma_reserved
Verify:
P321
Change-Id: Ia24e811a02d47d70afa1c06361fd0852c357394c
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Hong Guo [Fri, 23 Nov 2018 02:34:07 +0000 (10:34 +0800)]
PM_SUSPEND: suspend: set wakeup reason to stick mem [2/2]
PD#SWPL-2287
Problem:
set wakeup reason to stick mem
Solution:
set wakeup reason to stick mem
Verify:
gxl,test pass
Change-Id: Iff6f1824ea4ac9ec12b8295d4283992fdac03b14
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Zhongfu Luo [Wed, 21 Nov 2018 10:14:23 +0000 (18:14 +0800)]
GXL: defendkey: support secure upgrade check [2/3]
PD#SWPL-2100
Problem:
GXL need to support secure upgrade check
Solution:
1.add dtb decrypt support
2.add 32bit defendkey support
Verify:
GXL skt board verify pass
Change-Id: I501967530b2a61d9b90c20241b82f92b00829453
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>