Helge Deller [Tue, 7 Nov 2023 13:33:32 +0000 (14:33 +0100)]
parisc/pgtable: Do not drop upper 5 address bits of physical address
commit
166b0110d1ee53290bd11618df6e3991c117495a upstream.
When calculating the pfn for the iitlbt/idtlbt instruction, do not
drop the upper 5 address bits. This doesn't seem to have an effect
on physical hardware which uses less physical address bits, but in
qemu the missing bits are visible.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Fri, 10 Nov 2023 15:13:15 +0000 (16:13 +0100)]
parisc: Prevent booting 64-bit kernels on PA1.x machines
commit
a406b8b424fa01f244c1aab02ba186258448c36b upstream.
Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes:
591d2108f3abc ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines")
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:08 +0000 (12:48 +0300)]
selftests/resctrl: Extend signal handler coverage to unmount on receiving signal
[ Upstream commit
3aff5146445582454c35900f3c0c972987cdd595 ]
Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit
caddc0fbe495 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.
Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().
Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.
Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.
Fixes:
caddc0fbe495 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Mon, 4 Sep 2023 09:53:37 +0000 (12:53 +0300)]
selftests/resctrl: Make benchmark command const and build it with pointers
[ Upstream commit
e33cb5702a9f287d829b0e9e6abe57f6a4aba6d2 ]
Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.
Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.
CMT test has to create a copy of the benchmark command before altering
the benchmark command.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of:
3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Mon, 4 Sep 2023 09:53:35 +0000 (12:53 +0300)]
selftests/resctrl: Simplify span lifetime
[ Upstream commit
b1a901e078c4ee4a6fe13021c4577ef5f3155251 ]
struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().
Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of:
3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Mon, 4 Sep 2023 09:53:34 +0000 (12:53 +0300)]
selftests/resctrl: Remove bw_report and bm_type from main()
[ Upstream commit
47e36f16c7846bf3627ff68525e02555c53dc99e ]
bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.
Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of:
3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Fernandes (Google) [Sat, 29 Jul 2023 14:27:31 +0000 (14:27 +0000)]
rcutorture: Fix stuttering races and other issues
[ Upstream commit
cca42bd8eb1b54a4c9bbf48c79d120e66619a3e4 ]
The stuttering code isn't functioning as expected. Ideally, it should
pause the torture threads for a designated period before resuming. Yet,
it fails to halt the test for the correct duration. Additionally, a race
condition exists, potentially causing the stuttering code to pause for
an extended period if the 'spt' variable is non-zero due to the stutter
orchestration thread's inadequate CPU time.
Moreover, over-stuttering can hinder RCU's progress on TREE07 kernels.
This happens as the stuttering code may run within a softirq due to RCU
callbacks. Consequently, ksoftirqd keeps a CPU busy for several seconds,
thus obstructing RCU's progress. This situation triggers a warning
message in the logs:
[ 2169.481783] rcu_torture_writer: rtort_pipe_count: 9
This warning suggests that an RCU torture object, although invisible to
RCU readers, couldn't make it past the pipe array and be freed -- a
strong indication that there weren't enough grace periods during the
stutter interval.
To address these issues, this patch sets the "stutter end" time to an
absolute point in the future set by the main stutter thread. This is
then used for waiting in stutter_wait(). While the stutter thread still
defines this absolute time, the waiters' waiting logic doesn't rely on
the stutter thread receiving sufficient CPU time to halt the stuttering
as the halting is now self-controlled.
Cc: stable@vger.kernel.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul E. McKenney [Wed, 26 Jul 2023 20:57:03 +0000 (13:57 -0700)]
torture: Make torture_hrtimeout_ns() take an hrtimer mode parameter
[ Upstream commit
a741deac787f0d2d7068638c067db20af9e63752 ]
The current torture-test sleeps are waiting for a duration, but there
are situations where it is better to wait for an absolute time, for
example, when ending a stutter interval. This commit therefore adds
an hrtimer mode parameter to torture_hrtimeout_ns(). Why not also the
other torture_hrtimeout_*() functions? The theory is that most absolute
times will be in nanoseconds, especially not (say) jiffies.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Stable-dep-of:
cca42bd8eb1b ("rcutorture: Fix stuttering races and other issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Muhammad Ahmed [Mon, 18 Sep 2023 20:52:54 +0000 (16:52 -0400)]
drm/amd/display: enable dsc_clk even if dsc_pg disabled
[ Upstream commit
40255df370e94d44f0f0a924400d68db0ee31bec ]
[why]
need to enable dsc_clk regardless dsc_pg
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guan Wentao [Thu, 12 Oct 2023 11:21:17 +0000 (19:21 +0800)]
Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE
[ Upstream commit
da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c ]
Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part.
The PID/VID was reported by the patch last year. [1]
Some SBCs like rockpi 5B A8 module contains the device.
And it`s founded in website. [2] [3]
Here is the device tables in /sys/kernel/debug/usb/devices .
T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=b85b Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=
00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/
Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4
Link: https://ubuntuforums.org/showthread.php?t=2489527
Cc: stable@vger.kernel.org
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Guan Wentao <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masum Reza [Sun, 24 Sep 2023 11:16:55 +0000 (16:46 +0530)]
Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables
[ Upstream commit
02be109d3a405dbc4d53fb4b4473d7a113548088 ]
This device is used in TP-Link TX20E WiFi+Bluetooth adapter.
Relevant information in /sys/kernel/debug/usb/devices
about the Bluetooth device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3570 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=
00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Masum Reza <masumrezarock100@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of:
da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Johansen [Sun, 10 Sep 2023 10:35:22 +0000 (03:35 -0700)]
apparmor: Fix regression in mount mediation
[ Upstream commit
157a3537d6bc28ceb9a11fc8cb67f2152d860146 ]
commit
2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")
introduced a new move_mount(2) system call and a corresponding new LSM
security_move_mount hook but did not implement this hook for any
existing LSM. This creates a regression for AppArmor mediation of
mount. This patch provides a base mapping of the move_mount syscall to
the existing mount mediation. In the future we may introduce
additional mediations around the new mount calls.
Fixes:
2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")
CC: stable@vger.kernel.org
Reported-by: Andreas Steinmetz <anstein99@googlemail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Johansen [Tue, 20 Sep 2022 03:48:48 +0000 (20:48 -0700)]
apparmor: pass cred through to audit info.
[ Upstream commit
90c436a64a6e20482a9a613c47eb4af2e8a5328e ]
The cred is needed to properly audit some messages, and will be needed
in the future for uid conditional mediation. So pass it through to
where the apparmor_audit_data struct gets defined.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of:
157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Johansen [Mon, 19 Sep 2022 07:46:09 +0000 (00:46 -0700)]
apparmor: rename audit_data->label to audit_data->subj_label
[ Upstream commit
d20f5a1a6e792d22199c9989ec7ab9e95c48d60c ]
rename audit_data's label field to subj_label to better reflect its
use. Also at the same time drop unneeded assignments to ->subj_label
as the later call to aa_check_perms will do the assignment if needed.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of:
157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Johansen [Wed, 14 Sep 2022 07:20:12 +0000 (00:20 -0700)]
apparmor: combine common_audit_data and apparmor_audit_data
[ Upstream commit
bd7bd201ca46c211c3ab251ca9854787d1331a2f ]
Everywhere where common_audit_data is used apparmor audit_data is also
used. We can simplify the code and drop the use of the aad macro
everywhere by combining the two structures.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of:
157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Sun, 25 Jun 2023 01:13:49 +0000 (09:13 +0800)]
apparmor: Fix kernel-doc warnings in apparmor/policy.c
[ Upstream commit
25ff0ff2d6286928dc516c74b879809c691c2dd8 ]
Fix kernel-doc warnings:
security/apparmor/policy.c:294: warning: Function parameter or
member 'proxy' not described in 'aa_alloc_profile'
security/apparmor/policy.c:785: warning: Function parameter or
member 'label' not described in 'aa_policy_view_capable'
security/apparmor/policy.c:785: warning: Function parameter or
member 'ns' not described in 'aa_policy_view_capable'
security/apparmor/policy.c:847: warning: Function parameter or
member 'ns' not described in 'aa_may_manage_policy'
security/apparmor/policy.c:964: warning: Function parameter or
member 'hname' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'info' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'noreplace' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'ns' not described in '__lookup_replace'
security/apparmor/policy.c:964: warning: Function parameter or
member 'p' not described in '__lookup_replace'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of:
157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Sun, 25 Jun 2023 01:13:46 +0000 (09:13 +0800)]
apparmor: Fix kernel-doc warnings in apparmor/resource.c
[ Upstream commit
13c1748e217078d437727eef333cb0387d13bc0e ]
Fix kernel-doc warnings:
security/apparmor/resource.c:111: warning: Function parameter or
member 'label' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'new_rlim' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'resource' not described in 'aa_task_setrlimit'
security/apparmor/resource.c:111: warning: Function parameter or
member 'task' not described in 'aa_task_setrlimit'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of:
157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Sun, 25 Jun 2023 01:13:44 +0000 (09:13 +0800)]
apparmor: Fix kernel-doc warnings in apparmor/lib.c
[ Upstream commit
8921482286116af193980f04f2f2755775a410a5 ]
Fix kernel-doc warnings:
security/apparmor/lib.c:33: warning: Excess function parameter
'str' description in 'aa_free_str_table'
security/apparmor/lib.c:33: warning: Function parameter or member
't' not described in 'aa_free_str_table'
security/apparmor/lib.c:94: warning: Function parameter or
member 'n' not described in 'skipn_spaces'
security/apparmor/lib.c:390: warning: Excess function parameter
'deny' description in 'aa_check_perms'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of:
157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Sun, 25 Jun 2023 01:13:39 +0000 (09:13 +0800)]
apparmor: Fix kernel-doc warnings in apparmor/audit.c
[ Upstream commit
26c9ecb34f5f5fa43c041a220de01d7cbea97dd0 ]
Fix kernel-doc warnings:
security/apparmor/audit.c:150: warning: Function parameter or
member 'type' not described in 'aa_audit_msg'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of:
157a3537d6bc ("apparmor: Fix regression in mount mediation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Sat, 28 Oct 2023 03:13:23 +0000 (20:13 -0700)]
cxl/port: Fix delete_endpoint() vs parent unregistration race
commit
8d2ad999ca3c64cb08cf6a58d227b9d9e746d708 upstream.
The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of
ports (struct cxl_port objects) between an endpoint and the root of a
CXL topology. Each port including the endpoint port is attached to the
cxl_port driver.
Given that setup, it follows that when either any port in that lineage
goes through a cxl_port ->remove() event, or the memdev goes through a
cxl_mem ->remove() event. The hierarchy below the removed port, or the
entire hierarchy if the memdev is removed needs to come down.
The delete_endpoint() callback is careful to check whether it is being
called to tear down the hierarchy, or if it is only being called to
teardown the memdev because an ancestor port is going through
->remove().
That care needs to take the device_lock() of the endpoint's parent.
Which requires 2 bugs to be fixed:
1/ A reference on the parent is needed to prevent use-after-free
scenarios like this signature:
BUG: spinlock bad magic on CPU#0, kworker/u56:0/11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-
20230524-3.fc38 05/24/2023
Workqueue: cxl_port detach_memdev [cxl_core]
RIP: 0010:spin_bug+0x65/0xa0
Call Trace:
do_raw_spin_lock+0x69/0xa0
__mutex_lock+0x695/0xb80
delete_endpoint+0xad/0x150 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
detach_memdev+0x15/0x20 [cxl_core]
process_one_work+0x1e3/0x4c0
worker_thread+0x1dd/0x3d0
2/ In the case of RCH topologies, the parent device that needs to be
locked is not always @port->dev as returned by cxl_mem_find_port(), use
endpoint->dev.parent instead.
Fixes:
8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Cc: <stable@vger.kernel.org>
Reported-by: Robert Richter <rrichter@amd.com>
Closes: http://lore.kernel.org/r/
20231018171713.1883517-2-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Harris [Thu, 26 Oct 2023 17:09:06 +0000 (10:09 -0700)]
cxl/region: Fix x1 root-decoder granularity calculations
commit
98a04c7aced2b43b3ac4befe216c4eecc7257d4b upstream.
Root decoder granularity must match value from CFWMS, which may not
be the region's granularity for non-interleaved root decoders.
So when calculating granularities for host bridge decoders, use the
region's granularity instead of the root decoder's granularity to ensure
the correct granularities are set for the host bridge decoders and any
downstream switch decoders.
Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch.
Region created with 2048 granularity using following command line:
cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \
-g 2048 -s 2048M
Use "cxl list -PDE | grep granularity" to get a view of the granularity
set at each level of the topology.
Before this patch:
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":512,
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":512,
"interleave_granularity":256,
After:
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":4096,
"interleave_granularity":2048,
"interleave_granularity":2048,
"interleave_granularity":4096,
"interleave_granularity":2048,
Fixes:
27b3f8d13830 ("cxl/region: Program target lists")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in
[djbw: fixup the prebuilt cxl_test region]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Mon, 23 Oct 2023 16:16:58 +0000 (12:16 -0400)]
i3c: master: svc: fix random hot join failure since timeout error
commit
9aaeef113c55248ecf3ab941c2e4460aaa8b8b9a upstream.
master side report:
silvaco-i3c-master
44330000.i3c-master: Error condition: MSTATUS 0x020090c7, MERRWARN 0x00100000
BIT 20: TIMEOUT error
The module has stalled too long in a frame. This happens when:
- The TX FIFO or RX FIFO is not handled and the bus is stuck in the
middle of a message,
- No STOP was issued and between messages,
- IBI manual is used and no decision was made.
The maximum stall period is 100 μs.
This can be considered as being just a warning as the system IRQ latency
can easily be greater than 100us.
Fixes:
dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-7-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Mon, 23 Oct 2023 16:16:57 +0000 (12:16 -0400)]
i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen
commit
dfd7cd6aafdb1f5ba93828e97e56b38304b23a05 upstream.
Upon IBIWON timeout, the SDA line will always be kept low if we don't emit
a stop. Calling svc_i3c_master_emit_stop() there will let the bus return to
idle state.
Fixes:
dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-6-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Mon, 23 Oct 2023 16:16:56 +0000 (12:16 -0400)]
i3c: master: svc: fix check wrong status register in irq handler
commit
225d5ef048c4ed01a475c95d94833bd7dd61072d upstream.
svc_i3c_master_irq_handler() wrongly checks register SVC_I3C_MINTMASKED. It
should be SVC_I3C_MSTATUS.
Fixes:
dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-5-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Mon, 23 Oct 2023 16:16:55 +0000 (12:16 -0400)]
i3c: master: svc: fix ibi may not return mandatory data byte
commit
c85e209b799f12d18a90ae6353b997b1bb1274a5 upstream.
MSTATUS[RXPEND] is only updated after the data transfer cycle started. This
creates an issue when the I3C clock is slow, and the CPU is running fast
enough that MSTATUS[RXPEND] may not be updated when the code reaches
checking point. As a result, mandatory data can be missed.
Add a wait for MSTATUS[COMPLETE] to ensure that all mandatory data is
already in FIFO. It also works without mandatory data.
Fixes:
dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-4-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Mon, 23 Oct 2023 16:16:54 +0000 (12:16 -0400)]
i3c: master: svc: fix wrong data return when IBI happen during start frame
commit
5e5e3c92e748a6d859190e123b9193cf4911fcca upstream.
┌─────┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┌─────
SCL: ┘ └─────┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┘
───┐ ┌─────┐ ┌─────┐ ┌───────────┐
SDA: └───────────────────────┘ └─────┘ └─────┘ └─────
xxx╱ ╲╱ ╲╱ ╲╱ ╲╱ ╲
: xxx╲IBI ╱╲ Addr(0x0a) ╱╲ RW ╱╲NACK╱╲ S ╱
If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately
scheduled, when svc_i3c_master_priv_xfers() initiates the I3C transfer and
attempts to send address 0x7e, the target interprets it as an
IBI handler and returns the target address 0x0a.
However, svc_i3c_master_priv_xfers() does not handle this case and proceeds
with other transfers, resulting in incorrect data being returned.
Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs,
return a failure to the driver.
Fixes:
dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-3-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Mon, 23 Oct 2023 16:16:53 +0000 (12:16 -0400)]
i3c: master: svc: fix race condition in ibi work thread
commit
6bf3fc268183816856c96b8794cd66146bc27b35 upstream.
The ibi work thread operates asynchronously with other transfers, such as
svc_i3c_master_priv_xfers(). Introduce mutex protection to ensure the
completion of the entire i3c/i2c transaction.
Fixes:
dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-2-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joshua Yeong [Wed, 13 Sep 2023 03:17:45 +0000 (11:17 +0800)]
i3c: master: cdns: Fix reading status register
commit
4bd8405257da717cd556f99e5fb68693d12c9766 upstream.
IBIR_DEPTH and CMDR_DEPTH should read from status0 instead of status1.
Cc: stable@vger.kernel.org
Fixes:
603f2bee2c54 ("i3c: master: Add driver for Cadence IP")
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230913031743.11439-2-joshua.yeong@starfivetech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Harris [Wed, 11 Oct 2023 14:51:31 +0000 (14:51 +0000)]
cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails
commit
0718588c7aaa7a1510b4de972370535b61dddd0d upstream.
Commit
5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in
cxl_region_attach()") tried to avoid 'eiw' initialization errors when
->nr_targets exceeded 16, by just decrementing ->nr_targets when
cxl_region_setup_targets() failed.
Commit
86987c766276 ("cxl/region: Cleanup target list on attach error")
extended that cleanup to also clear cxled->pos and p->targets[pos]. The
initialization error was incidentally fixed separately by:
Commit
8d4285425714 ("cxl/region: Fix port setup uninitialized variable
warnings") which was merged a few days after
5e42bcbc3fef.
But now the original cleanup when cxl_region_setup_targets() fails
prevents endpoint and switch decoder resources from being reused:
1) the cleanup does not set the decoder's region to NULL, which results
in future dpa_size_store() calls returning -EBUSY
2) the decoder is not properly freed, which results in future commit
errors associated with the upstream switch
Now that the initialization errors were fixed separately, the proper
cleanup for this case is to just return immediately. Then the resources
associated with this target get cleanup up as normal when the failed
region is deleted.
The ->nr_targets decrement in the error case also helped prevent
a p->targets[] array overflow, so add a new check to prevent against
that overflow.
Tested by trying to create an invalid region for a 2 switch * 2 endpoint
topology, and then following up with creating a valid region.
Fixes:
5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169703589120.1202031.14696100866518083806.stgit@bgt-140510-bm03.eng.stellus.in
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Fri, 20 Oct 2023 20:30:29 +0000 (22:30 +0200)]
mtd: cfi_cmdset_0001: Byte swap OTP info
commit
565fe150624ee77dc63a735cc1b3bff5101f38a3 upstream.
Currently the offset into the device when looking for OTP
bits can go outside of the address of the MTD NOR devices,
and if that memory isn't readable, bad things happen
on the IXP4xx (added prints that illustrate the problem before
the crash):
cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x00000100
ixp4xx_copy_from copy from 0x00000100 to 0xc880dd78
cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x12000000
ixp4xx_copy_from copy from 0x12000000 to 0xc880dd78
8<--- cut here ---
Unable to handle kernel paging request at virtual address
db000000
[
db000000] *pgd=
00000000
(...)
This happens in this case because the IXP4xx is big endian and
the 32- and 16-bit fields in the struct cfi_intelext_otpinfo are not
properly byteswapped. Compare to how the code in read_pri_intelext()
byteswaps the fields in struct cfi_pri_intelext.
Adding a small byte swapping loop for the OTP in read_pri_intelext()
and the crash goes away.
The problem went unnoticed for many years until I enabled
CONFIG_MTD_OTP on the IXP4xx as well, triggering the bug.
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231020-mtd-otp-byteswap-v4-1-0d132c06aa9d@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florent Revest [Mon, 28 Aug 2023 15:08:56 +0000 (17:08 +0200)]
mm: make PR_MDWE_REFUSE_EXEC_GAIN an unsigned long
commit
0da668333fb07805c2836d5d50e26eda915b24a1 upstream.
Defining a prctl flag as an int is a footgun because on a 64 bit machine
and with a variadic implementation of prctl (like in musl and glibc), when
used directly as a prctl argument, it can get casted to long with garbage
upper bits which would result in unexpected behaviors.
This patch changes the constant to an unsigned long to eliminate that
possibilities. This does not break UAPI.
I think that a stable backport would be "nice to have": to reduce the
chances that users build binaries that could end up with garbage bits in
their MDWE prctl arguments. We are not aware of anyone having yet
encountered this corner case with MDWE prctls but a backport would reduce
the likelihood it happens, since this sort of issues has happened with
other prctls. But If this is perceived as a backporting burden, I suppose
we could also live without a stable backport.
Link: https://lkml.kernel.org/r/20230828150858.393570-5-revest@chromium.org
Fixes:
b507808ebce2 ("mm: implement memory-deny-write-execute as a prctl")
Signed-off-by: Florent Revest <revest@chromium.org>
Suggested-by: Alexey Izbyshev <izbyshev@ispras.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ayush Jain <ayush.jain3@amd.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zi Yan [Wed, 13 Sep 2023 20:12:46 +0000 (16:12 -0400)]
mm/memory_hotplug: use pfn math in place of direct struct page manipulation
commit
1640a0ef80f6d572725f5b0330038c18e98ea168 upstream.
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use pfn calculation to
handle it properly.
Without the fix, a wrong number of page might be skipped. Since skip cannot be
negative, scan_movable_page() will end early and might miss a movable page with
-ENOENT. This might fail offline_pages(). No bug is reported. The fix comes
from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com
Fixes:
eeb0efd071d8 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zi Yan [Wed, 13 Sep 2023 20:12:45 +0000 (16:12 -0400)]
mm/hugetlb: use nth_page() in place of direct struct page manipulation
commit
426056efe835cf4864ccf4c328fe3af9146fc539 upstream.
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
A wrong or non-existing page might be tried to be grabbed, either
leading to a non freeable page or kernel memory access errors. No bug
is reported. It comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-3-zi.yan@sent.com
Fixes:
57a196a58421 ("hugetlb: simplify hugetlb handling in follow_page_mask")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zi Yan [Wed, 13 Sep 2023 20:12:44 +0000 (16:12 -0400)]
mm/cma: use nth_page() in place of direct struct page manipulation
commit
2e7cfe5cd5b6b0b98abf57a3074885979e187c1c upstream.
Patch series "Use nth_page() in place of direct struct page manipulation",
v3.
On SPARSEMEM without VMEMMAP, struct page is not guaranteed to be
contiguous, since each memory section's memmap might be allocated
independently. hugetlb pages can go beyond a memory section size, thus
direct struct page manipulation on hugetlb pages/subpages might give wrong
struct page. Kernel provides nth_page() to do the manipulation properly.
Use that whenever code can see hugetlb pages.
This patch (of 5):
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
Without the fix, page_kasan_tag_reset() could reset wrong page tags,
causing a wrong kasan result. No related bug is reported. The fix
comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20230913201248.452081-2-zi.yan@sent.com
Fixes:
2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Tue, 24 Oct 2023 08:15:19 +0000 (10:15 +0200)]
s390/cmma: fix detection of DAT pages
commit
44d93045247661acbd50b1629e62f415f2747577 upstream.
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however is
incorrect: only the first three of the four pages which belong to segment
and region tables will be marked as being used for DAT. The last page is
incorrectly marked as no-dat.
This can result in incorrect guest TLB flushes.
Fix this by simply marking all four pages.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Fri, 20 Oct 2023 15:26:50 +0000 (17:26 +0200)]
s390/mm: add missing arch_set_page_dat() call to gmap allocations
commit
1954da4a2b621a3328a63382cae7e5f5e2af502c upstream.
If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.
Region, segment, and page tables allocated within the gmap code are
incorrectly marked as "no-dat", since an explicit call to
arch_set_page_dat() is missing, which would remove the "no-dat" mark.
In order to fix this add a new gmap_alloc_crst() function which should
be used to allocate region and segment tables, and which also calls
arch_set_page_dat().
Also add the arch_set_page_dat() call to page_table_alloc_pgste().
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Tue, 17 Oct 2023 19:07:04 +0000 (21:07 +0200)]
s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()
commit
09cda0a400519b1541591c506e54c9c48e3101bf upstream.
If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.
Region and segment tables allocated via vmem_crst_alloc() are incorrectly
marked as "no-dat", as soon as slab_is_available() returns true.
Such tables are allocated e.g. when kernel page tables are split, memory is
hotplugged, or a DCSS segment is loaded.
Fix this by adding the missing arch_set_page_dat() call.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alain Volmat [Mon, 9 Oct 2023 08:24:50 +0000 (10:24 +0200)]
dmaengine: stm32-mdma: correct desc prep when channel running
commit
03f25d53b145bc2f7ccc82fc04e4482ed734f524 upstream.
In case of the prep descriptor while the channel is already running, the
CCR register value stored into the channel could already have its EN bit
set. This would lead to a bad transfer since, at start transfer time,
enabling the channel while other registers aren't yet properly set.
To avoid this, ensure to mask the CCR_EN bit when storing the ccr value
into the mdma channel structure.
Fixes:
a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Tested-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20231009082450.452877-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanjuán García, Jorge [Thu, 19 Oct 2023 14:15:34 +0000 (14:15 +0000)]
mcb: fix error handling for different scenarios when parsing
commit
63ba2d07b4be72b94216d20561f43e1150b25d98 upstream.
chameleon_parse_gdd() may fail for different reasons and end up
in the err tag. Make sure we at least always free the mcb_device
allocated with mcb_alloc_dev().
If mcb_device_register() fails, make sure to give up the reference
in the same place the device was added.
Fixes:
728ac3389296 ("mcb: mcb-parse: fix error handing in chameleon_parse_gdd()")
Cc: stable <stable@kernel.org>
Reviewed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Link: https://lore.kernel.org/r/20231019141434.57971-2-jorge.sanjuangarcia@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saravana Kannan [Wed, 18 Oct 2023 01:38:50 +0000 (18:38 -0700)]
driver core: Release all resources during unbind before updating device links
commit
2e84dc37920012b458e9458b19fc4ed33f81bc74 upstream.
This commit fixes a bug in commit
9ed9895370ae ("driver core: Functional
dependencies tracking support") where the device link status was
incorrectly updated in the driver unbind path before all the device's
resources were released.
Fixes:
9ed9895370ae ("driver core: Functional dependencies tracking support")
Cc: stable <stable@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/all/
20231014161721.f4iqyroddkcyoefo@pengutronix.de/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: James Clark <james.clark@arm.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231018013851.3303928-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Tue, 31 Oct 2023 19:10:33 +0000 (15:10 -0400)]
tracing: Have the user copy of synthetic event address use correct context
commit
4f7969bcd6d33042d62e249b41b5578161e4c868 upstream.
A synthetic event is created by the synthetic event interface that can
read both user or kernel address memory. In reality, it reads any
arbitrary memory location from within the kernel. If the address space is
in USER (where CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE is set) then
it uses strncpy_from_user_nofault() to copy strings otherwise it uses
strncpy_from_kernel_nofault().
But since both functions use the same variable there's no annotation to
what that variable is (ie. __user). This makes sparse complain.
Quiet sparse by typecasting the strncpy_from_user_nofault() variable to
a __user pointer.
Link: https://lore.kernel.org/linux-trace-kernel/20231031151033.73c42e23@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes:
0934ae9977c2 ("tracing: Fix reading strings from synthetic events");
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202311010013.fm8WTxa5-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tiezhu Yang [Tue, 11 Jul 2023 09:13:34 +0000 (17:13 +0800)]
selftests/clone3: Fix broken test under !CONFIG_TIME_NS
commit
fc7f04dc23db50206bee7891516ed4726c3f64cf upstream.
When execute the following command to test clone3 under !CONFIG_TIME_NS:
# make headers && cd tools/testing/selftests/clone3 && make && ./clone3
we can see the following error info:
# [7538] Trying clone3() with flags 0x80 (size 0)
# Invalid argument - Failed to create new process
# [7538] clone3() with flags says: -22 expected 0
not ok 18 [7538] Result (-22) is different than expected (0)
...
# Totals: pass:18 fail:1 xfail:0 xpass:0 skip:0 error:0
This is because if CONFIG_TIME_NS is not set, but the flag
CLONE_NEWTIME (0x80) is used to clone a time namespace, it
will return -EINVAL in copy_time_ns().
If kernel does not support CONFIG_TIME_NS, /proc/self/ns/time
will be not exist, and then we should skip clone3() test with
CLONE_NEWTIME.
With this patch under !CONFIG_TIME_NS:
# make headers && cd tools/testing/selftests/clone3 && make && ./clone3
...
# Time namespaces are not supported
ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
...
# Totals: pass:18 fail:0 xfail:0 xpass:0 skip:1 error:0
Link: https://lkml.kernel.org/r/1689066814-13295-1-git-send-email-yangtiezhu@loongson.cn
Fixes:
515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Bara [Sat, 15 Jul 2023 07:53:24 +0000 (09:53 +0200)]
i2c: core: Run atomic i2c xfer when !preemptible
commit
aa49c90894d06e18a1ee7c095edbd2f37c232d02 upstream.
Since
bae1d3a05a8b, i2c transfers are non-atomic if preemption is
disabled. However, non-atomic i2c transfers require preemption (e.g. in
wait_for_completion() while waiting for the DMA).
panic() calls preempt_disable_notrace() before calling
emergency_restart(). Therefore, if an i2c device is used for the
restart, the xfer should be atomic. This avoids warnings like:
[ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[ 12.676926] Voluntary context switch within RCU read-side critical section!
...
[ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114
[ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58
[ 13.001050] machine_restart from panic+0x2a8/0x32c
Use !preemptible() instead, which is basically the same check as
pre-v5.2.
Fixes:
bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-2-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zi Yan [Wed, 13 Sep 2023 20:12:48 +0000 (16:12 -0400)]
mips: use nth_page() in place of direct struct page manipulation
commit
aa5fe31b6b59210cb4ea28a59e68781f48eeca74 upstream.
__flush_dcache_pages() is called during hugetlb migration via
migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() ->
move_to_new_folio() -> flush_dcache_folio(). And with hugetlb and without
sparsemem vmemmap, struct page is not guaranteed to be contiguous beyond a
section. Use nth_page() instead.
Without the fix, a wrong address might be used for data cache page flush.
No bug is reported. The fix comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-6-zi.yan@sent.com
Fixes:
15fa3e8e3269 ("mips: implement the new page table range API")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zi Yan [Wed, 13 Sep 2023 20:12:47 +0000 (16:12 -0400)]
fs: use nth_page() in place of direct struct page manipulation
commit
8db0ec791f7788cd21e7f91ee5ff42c1c458d0e7 upstream.
When dealing with hugetlb pages, struct page is not guaranteed to be
contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle it
properly.
Without the fix, a wrong subpage might be checked for HWPoison, causing wrong
number of bytes of a page copied to user space. No bug is reported. The fix
comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-5-zi.yan@sent.com
Fixes:
38c1ddbde6c6 ("hugetlbfs: improve read HWPOISON hugepage")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Wolsieffer [Tue, 31 Oct 2023 20:22:36 +0000 (16:22 -0400)]
scripts/gdb/vmalloc: disable on no-MMU
commit
6620999f0d41e4fd6f047727936a964c3399d249 upstream.
vmap_area does not exist on no-MMU, therefore the GDB scripts fail to
load:
Traceback (most recent call last):
File "<...>/vmlinux-gdb.py", line 51, in <module>
import linux.vmalloc
File "<...>/scripts/gdb/linux/vmalloc.py", line 14, in <module>
vmap_area_ptr_type = vmap_area_type.get_type().pointer()
^^^^^^^^^^^^^^^^^^^^^^^^^
File "<...>/scripts/gdb/linux/utils.py", line 28, in get_type
self._type = gdb.lookup_type(self._name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No struct type named vmap_area.
To fix this, disable the command and add an informative error message if
CONFIG_MMU is not defined, following the example of lx-slabinfo.
Link: https://lkml.kernel.org/r/20231031202235.2655333-2-ben.wolsieffer@hefring.com
Fixes:
852622bf3616 ("scripts/gdb/vmalloc: add vmallocinfo support")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Bara [Sat, 15 Jul 2023 07:53:23 +0000 (09:53 +0200)]
kernel/reboot: emergency_restart: Set correct system_state
commit
60466c067927abbcaff299845abd4b7069963139 upstream.
As the emergency restart does not call kernel_restart_prepare(), the
system_state stays in SYSTEM_RUNNING.
Since
bae1d3a05a8b, this hinders i2c_in_atomic_xfer_mode() from becoming
active, and therefore might lead to avoidable warnings in the restart
handlers, e.g.:
[ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[ 12.676926] Voluntary context switch within RCU read-side critical section!
...
[ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114
[ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58
[ 13.001050] machine_restart from panic+0x2a8/0x32c
Avoid these by setting the correct system_state.
Fixes:
bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-1-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Tue, 5 Sep 2023 00:32:27 +0000 (17:32 -0700)]
quota: explicitly forbid quota files from being encrypted
commit
d3cc1b0be258191d6360c82ea158c2972f8d3991 upstream.
Since commit
d7e7b9af104c ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key"), xfstest generic/270 causes a WARNING when run on
f2fs with test_dummy_encryption in the mount options:
$ kvm-xfstests -c f2fs/encrypt generic/270
[...]
WARNING: CPU: 1 PID: 2453 at fs/crypto/keyring.c:240 fscrypt_destroy_keyring+0x1f5/0x260
The cause of the WARNING is that not all encrypted inodes have been
evicted before fscrypt_destroy_keyring() is called, which violates an
assumption. This happens because the test uses an external quota file,
which gets automatically encrypted due to test_dummy_encryption.
Encryption of quota files has never really been supported. On ext4,
ext4_quota_read() does not decrypt the data, so encrypted quota files
are always considered invalid on ext4. On f2fs, f2fs_quota_read() uses
the pagecache, so trying to use an encrypted quota file gets farther,
resulting in the issue described above being possible. But this was
never intended to be possible, and there is no use case for it.
Therefore, make the quota support layer explicitly reject using
IS_ENCRYPTED inodes when quotaon is attempted.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <
20230905003227.326998-1-ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Tue, 19 Sep 2023 01:25:25 +0000 (09:25 +0800)]
jbd2: fix potential data lost in recovering journal raced with synchronizing fs bdev
commit
61187fce8600e8ef90e601be84f9d0f3222c1206 upstream.
JBD2 makes sure journal data is fallen on fs device by sync_blockdev(),
however, other process could intercept the EIO information from bdev's
mapping, which leads journal recovering successful even EIO occurs during
data written back to fs device.
We found this problem in our product, iscsi + multipath is chosen for block
device of ext4. Unstable network may trigger kpartx to rescan partitions in
device mapper layer. Detailed process is shown as following:
mount kpartx irq
jbd2_journal_recover
do_one_pass
memcpy(nbh->b_data, obh->b_data) // copy data to fs dev from journal
mark_buffer_dirty // mark bh dirty
vfs_read
generic_file_read_iter // dio
filemap_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
block_write_full_folio
submit_bh_wbc
>> EIO occurs in disk <<
end_buffer_async_write
mark_buffer_write_io_error
mapping_set_error
set_bit(AS_EIO, &mapping->flags) // set!
filemap_check_errors
test_and_clear_bit(AS_EIO, &mapping->flags) // clear!
err2 = sync_blockdev
filemap_write_and_wait
filemap_check_errors
test_and_clear_bit(AS_EIO, &mapping->flags) // false
err2 = 0
Filesystem is mounted successfully even data from journal is failed written
into disk, and ext4/ocfs2 could become corrupted.
Fix it by comparing the wb_err state in fs block device before recovering
and after recovering.
A reproducer can be found in the kernel bugzilla referenced below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217888
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230919012525.1783108-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Tue, 3 Oct 2023 15:54:22 +0000 (17:54 +0200)]
ASoC: codecs: wsa-macro: fix uninitialized stack variables with name prefix
commit
72151ad0cba8a07df90130ff62c979520d71f23b upstream.
Driver compares widget name in wsa_macro_spk_boost_event() widget event
callback, however it does not handle component's name prefix. This
leads to using uninitialized stack variables as registers and register
values. Handle gracefully such case.
Fixes:
2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155422.801160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jamie Lentin [Mon, 2 Oct 2023 15:09:14 +0000 (15:09 +0000)]
hid: lenovo: Resend all settings on reset_resume for compact keyboards
commit
2f2bd7cbd1d1548137b351040dc4e037d18cdfdc upstream.
The USB Compact Keyboard variant requires a reset_resume function to
restore keyboard configuration after a suspend in some situations. Move
configuration normally done on probe to lenovo_features_set_cptkbd(), then
recycle this for use on reset_resume.
Without, the keyboard and driver would end up in an inconsistent state,
breaking middle-button scrolling amongst other problems, and twiddling
sysfs values wouldn't help as the middle-button mode won't be set until
the driver is reloaded.
Tested on a USB and Bluetooth Thinkpad Compact Keyboard.
CC: stable@vger.kernel.org
Fixes:
94eefa271323 ("HID: lenovo: Use native middle-button mode for compact keyboards")
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Link: https://lore.kernel.org/r/20231002150914.22101-1-martink@posteo.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:13 +0000 (12:48 +0300)]
selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests
commit
ef43c30858754d99373a63dff33280a9969b49bc upstream.
The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in
commit
06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting
format") was "randomly chosen value" (as admitted by the changelog).
When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.
Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.
Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>
Fixes:
06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:12 +0000 (12:48 +0300)]
selftests/resctrl: Fix feature checks
commit
06035f019422ba17e85c11e70d6d8bdbe9fa1afd upstream.
The MBA and CMT tests expect support of other features to be able to
run.
When platform only supports MBA but not MBM, MBA test will fail with:
Failed to open total bw file: No such file or directory
When platform only supports CMT but not CAT, CMT test will fail with:
Failed to open bit mask file '/sys/fs/resctrl/info/L3/cbm_mask': No such file or directory
It leads to the test reporting test fail (even if no test was run at
all).
Extend feature checks to cover these two conditions to show these tests
were skipped rather than failed.
Fixes:
ee0415681eb6 ("selftests/resctrl: Use resctrl/info for feature detection")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Refactor feature check to use resource and feature name
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:11 +0000 (12:48 +0300)]
selftests/resctrl: Refactor feature check to use resource and feature name
commit
d56e5da0e0f557a206bace16bbbdad00a5800e34 upstream.
Feature check in validate_resctrl_feature_request() takes in the test
name string and maps that to what to check per test.
Pass resource and feature names to validate_resctrl_feature_request()
directly rather than deriving them from the test name inside the
function which makes the feature check easier to extend for new test
cases.
Use !! in the return statement to make the boolean conversion more
obvious even if it is not strictly necessary from correctness point of
view (to avoid it looking like the function is returning a freed
pointer).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Remove duplicate feature check from CMT test
Cc: <stable@vger.kernel.org> # selftests/resctrl: Move _GNU_SOURCE define into Makefile
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:10 +0000 (12:48 +0300)]
selftests/resctrl: Move _GNU_SOURCE define into Makefile
commit
3a1e4a91aa454a1c589a9824d54179fdbfccde45 upstream.
_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.
It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:09 +0000 (12:48 +0300)]
selftests/resctrl: Remove duplicate feature check from CMT test
commit
030b48fb2cf045dead8ee2c5ead560930044c029 upstream.
The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.
Remove the duplicated feature check for CMT from cmt_resctrl_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Mon, 2 Oct 2023 09:48:07 +0000 (12:48 +0300)]
selftests/resctrl: Fix uninitialized .sa_flags
commit
beb7f471847663559bd0fe60af1d70e05a1d7c6c upstream.
signal_handler_unregister() calls sigaction() with uninitializing
sa_flags in the struct sigaction.
Make sure sa_flags is always initialized in signal_handler_unregister()
by initializing the struct sigaction when declaring it. Also add the
initialization to signal_handler_register() even if there are no know
bugs in there because correctness is then obvious from the code itself.
Fixes:
73c55fa5ab55 ("selftests/resctrl: Commonize the signal handler register/unregister for all tests")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Thu, 23 Nov 2023 09:47:49 +0000 (10:47 +0100)]
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
commit
805ce81826c896dd3c351a32814b28557f9edf54 upstream.
In the current setup the PA is left unmuted even when the
Soundwire ports are not started streaming. This can lead to click
and pop sounds during start.
There is a same issue in the reverse order where in the PA is
left unmute even after the data stream is stopped, the time
between data stream stopping and port closing is long enough
to accumulate DC on the line resulting in Click/Pop noise
during end of stream.
making use of new mute_unmute_on_trigger flag is helping a
lot with this Click/Pop issues reported on this Codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Thu, 23 Nov 2023 09:47:48 +0000 (10:47 +0100)]
ASoC: soc-dai: add flag to mute and unmute stream during trigger
commit
f0220575e65abe09c09cd17826a3cdea76e8d58f upstream.
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ johan: backport to v6.6.2 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Tue, 21 Nov 2023 12:14:22 +0000 (13:14 +0100)]
netfilter: nf_tables: split async and sync catchall in two functions
[ Upstream commit
8837ba3e58ea1e3d09ae36db80b1e80853aada95 ]
list_for_each_entry_safe() does not work for the async case which runs
under RCU, therefore, split GC logic for catchall in two functions
instead, one for each of the sync and async GC variants.
The catchall sync GC variant never sees a _DEAD bit set on ever, thus,
this handling is removed in such case, moreover, allocate GC sync batch
via GFP_KERNEL.
Fixes:
93995bf4af2c ("netfilter: nf_tables: remove catchall element in GC sync path")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Tue, 21 Nov 2023 12:14:21 +0000 (13:14 +0100)]
netfilter: nf_tables: remove catchall element in GC sync path
[ Upstream commit
93995bf4af2c5a99e2a87f0cd5ce547d31eb7630 ]
The expired catchall element is not deactivated and removed from GC sync
path. This path holds mutex so just call nft_setelem_data_deactivate()
and nft_setelem_catchall_remove() before queueing the GC work.
Fixes:
4a9e12ea7e70 ("netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mimi Zohar [Wed, 18 Oct 2023 18:47:02 +0000 (14:47 -0400)]
ima: detect changes to the backing overlay file
commit
b836c4d29f2744200b2af41e14bf50758dddc818 upstream.
Commit
18b44bc5a672 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.
Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Goldstein [Thu, 5 Oct 2023 11:15:58 +0000 (14:15 +0300)]
ima: annotate iint mutex to avoid lockdep false positive warnings
commit
e044374a8a0a99e46f4e6d6751d3042b6d9cc12e upstream.
It is not clear that IMA should be nested at all, but as long is it
measures files both on overlayfs and on underlying fs, we need to
annotate the iint mutex to avoid lockdep false positives related to
IMA + overlayfs, same as overlayfs annotates the inode mutex.
Reported-and-tested-by: syzbot+b42fe626038981fb7bfa@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 3 Oct 2023 15:29:24 +0000 (17:29 +0200)]
mfd: qcom-spmi-pmic: Fix revid implementation
commit
7b439aaa62fee474a0d84d67a25f4984467e7b95 upstream.
The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.
First, it assumes that just because the sibling base device has been
registered that means that it is also bound to a driver, which may not
be the case (e.g. due to probe deferral or asynchronous probe). This
could trigger a NULL-pointer dereference when attempting to access the
driver data of the unbound device.
Second, it accesses driver data of a sibling device directly and without
any locking, which means that the driver data may be freed while it is
being accessed (e.g. on driver unbind).
Third, it leaks a struct device reference to the sibling device which is
looked up using the spmi_device_from_of() every time a function (child)
device is calling the revid function (e.g. on probe).
Fix this mess by reimplementing the revid lookup so that it is done only
at probe of the PMIC device; the base device fetches the revid info from
the hardware, while any secondary SPMI device fetches the information
from the base device and caches it so that it can be accessed safely
from its children. If the base device has not been probed yet then probe
of a secondary device is deferred.
Fixes:
e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-3-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 3 Oct 2023 15:29:23 +0000 (17:29 +0200)]
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
commit
a0fa44c261e448c531f9adb3a5189a3520f3e316 upstream.
The Qualcomm SPMI PMIC revid implementation is broken in multiple ways.
First, it totally ignores struct device_node reference counting and
leaks references to the parent bus node as well as each child it
iterates over using an open-coded for_each_child_of_node().
Second, it leaks references to each spmi device on the bus that it
iterates over by failing to drop the reference taken by the
spmi_device_from_of() helper.
Fix the struct device_node leaks by reimplementing the lookup using
for_each_child_of_node() and adding the missing reference count
decrements. Fix the sibling struct device leaks by dropping the
unnecessary lookups of devices with the wrong USID.
Note that this still leaves one struct device reference leak in case a
base device is found but it is not the parent of the device used for the
lookup. This will be addressed in a follow-on patch.
Fixes:
e9c11c6e3a0e ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231003152927.15000-2-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Marangi [Sat, 7 Oct 2023 13:10:42 +0000 (15:10 +0200)]
leds: trigger: netdev: Move size check in set_device_name
commit
259e33cbb1712a7dd844fc9757661cc47cb0e39b upstream.
GCC 13.2 complains about array subscript 17 is above array bounds of
'char[16]' with IFNAMSIZ set to 16.
The warning is correct but this scenario is impossible.
set_device_name is called by device_name_store (store sysfs entry) and
netdev_trig_activate.
device_name_store already check if size is >= of IFNAMSIZ and return
-EINVAL. (making the warning scenario impossible)
netdev_trig_activate works on already defined interface, where the name
has already been checked and should already follow the condition of
strlen() < IFNAMSIZ.
Aside from the scenario being impossible, set_device_name can be
improved to both mute the warning and make the function safer.
To make it safer, move size check from device_name_store directly to
set_device_name and prevent any out of bounds scenario.
Cc: stable@vger.kernel.org
Fixes:
28a6a2ef18ad ("leds: trigger: netdev: refactor code setting device name")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202309192035.GTJEEbem-lkp@intel.com/
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231007131042.15032-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Tue, 5 Sep 2023 09:55:34 +0000 (15:25 +0530)]
arm64: dts: qcom: ipq6018: Fix tcsr_mutex register size
commit
72fc3d58b87b0d622039c6299b89024fbb7b420f upstream.
IPQ6018's TCSR Mutex HW lock register has 32 locks of size 4KB each.
Total size of the TCSR Mutex registers is 128KB.
Fix size of the tcsr_mutex hwlock register to 0x20000.
Changes in v2:
- Drop change to remove qcom,ipq6018-tcsr-mutex compatible string
- Added Fixes and stable tags
Cc: stable@vger.kernel.org
Fixes:
5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905095535.1263113-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Mon, 4 Sep 2023 17:25:15 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq9574: Fix hwlock index for SMEM
commit
5fe8508e2bc8eb4208b0434b6c1ca306c1519ade upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ9574.
Cc: stable@vger.kernel.org
Fixes:
46384ac7a618 ("arm64: dts: qcom: ipq9574: Add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-5-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Khoruzhick [Wed, 27 Sep 2023 19:50:02 +0000 (12:50 -0700)]
ACPI: FPDT: properly handle invalid FPDT subtables
commit
a83c68a3bf7c418c9a46693c63c638852b0c1f4e upstream.
Buggy BIOSes may have invalid FPDT subtables, e.g. on my hardware:
S3PT subtable:
7F20FE30: 53 33 50 54 24 00 00 00-00 00 00 00 00 00 18 01 *S3PT$...........*
7F20FE40: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 *................*
7F20FE50: 00 00 00 00
Here the first record has zero length.
FBPT subtable:
7F20FE50: 46 42 50 54-3C 00 00 00 46 42 50 54 *....FBPT<...FBPT*
7F20FE60: 02 00 30 02 00 00 00 00-00 00 00 00 00 00 00 00 *..0.............*
7F20FE70: 2A A6 BC 6E 0B 00 00 00-1A 44 41 70 0B 00 00 00 **..n.....DAp....*
7F20FE80: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 *................*
And here FBPT table has FBPT signature repeated instead of the first
record.
Current code will be looping indefinitely due to zero length records, so
break out of the loop if record length is zero.
While we are here, add proper handling for fpdt_process_subtable()
failures.
Fixes:
d1eb86e59be0 ("ACPI: tables: introduce support for FPDT table")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ rjw: Comment edit, added empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kathiravan Thirumoorthy [Mon, 25 Sep 2023 08:29:22 +0000 (13:59 +0530)]
firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
commit
3337a6fea25370d3d244ec6bb38c71ee86fcf837 upstream.
Per the "SMC calling convention specification", the 64-bit calling
convention can only be used when the client is 64-bit. Whereas the
32-bit calling convention can be used by either a 32-bit or a 64-bit
client.
Currently during SCM probe, irrespective of the client, 64-bit calling
convention is made, which is incorrect and may lead to the undefined
behaviour when the client is 32-bit. Let's fix it.
Cc: stable@vger.kernel.org
Fixes:
9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Reviewed-By: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230925-scm-v3-1-8790dff6a749@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Mon, 4 Sep 2023 17:25:14 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq8074: Fix hwlock index for SMEM
commit
8a781d04e580705d36f7db07f5c80e748100b69d upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ8074.
Cc: stable@vger.kernel.org
Fixes:
42124b947e8e ("arm64: dts: qcom: ipq8074: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-4-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Mon, 4 Sep 2023 17:25:12 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq5332: Fix hwlock index for SMEM
commit
d08afd80158399a081b478a19902364e3dd0f84c upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ5332.
Cc: stable@vger.kernel.org
Fixes:
d56dd7f935e1 ("arm64: dts: qcom: ipq5332: add SMEM support")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-2-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Arcari [Thu, 5 Oct 2023 11:17:57 +0000 (07:17 -0400)]
thermal: intel: powerclamp: fix mismatch in get function for max_idle
commit
fae633cfb729da2771b5433f6b84ae7e8b4aa5f7 upstream.
KASAN reported this
[ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90
[ 444.853111] Read of size 4 at addr
ffffffffc16c9220 by task cat/2105
...
[ 444.853442] The buggy address belongs to the variable:
[ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp]
There is a mismatch between the param_get_int and the definition of
max_idle. Replacing param_get_int with param_get_byte resolves this
issue.
Fixes:
ebf519710218 ("thermal: intel: powerclamp: Add two module parameters")
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Mon, 18 Sep 2023 18:15:33 +0000 (14:15 -0400)]
btrfs: don't arbitrarily slow down delalloc if we're committing
commit
11aeb97b45ad2e0040cbb2a589bc403152526345 upstream.
We have a random schedule_timeout() if the current transaction is
committing, which seems to be a holdover from the original delalloc
reservation code.
Remove this, we have the proper flushing stuff, we shouldn't be hoping
for random timing things to make everything work. This just induces
latency for no reason.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Sat, 30 Sep 2023 17:46:56 +0000 (17:46 +0000)]
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
commit
5f98fd034ca6fd1ab8c91a3488968a0e9caaabf6 upstream.
Since the actual slab freeing is deferred when calling kvfree_rcu(), so
is the kmemleak_free() callback informing kmemleak of the object
deletion. From the perspective of the kvfree_rcu() caller, the object is
freed and it may remove any references to it. Since kmemleak does not
scan RCU internal data storing the pointer, it will report such objects
as leaks during the grace period.
Tell kmemleak to ignore such objects on the kvfree_call_rcu() path. Note
that the tiny RCU implementation does not have such issue since the
objects can be tracked from the rcu_ctrlblk structure.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://lore.kernel.org/all/
F903A825-F05F-4B77-A2B5-
7356282FBA2C@apple.com/
Cc: <stable@vger.kernel.org>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Geffon [Fri, 22 Sep 2023 16:07:04 +0000 (12:07 -0400)]
PM: hibernate: Clean up sync_read handling in snapshot_write_next()
commit
d08970df1980476f27936e24d452550f3e9e92e1 upstream.
In snapshot_write_next(), sync_read is set and unset in three different
spots unnecessiarly. As a result there is a subtle bug where the first
page after the meta data has been loaded unconditionally sets sync_read
to 0. If this first PFN was actually a highmem page, then the returned
buffer will be the global "buffer," and the page needs to be loaded
synchronously.
That is, I'm not sure we can always assume the following to be safe:
handle->buffer = get_buffer(&orig_bm, &ca);
handle->sync_read = 0;
Because get_buffer() can call get_highmem_page_buffer() which can
return 'buffer'.
The easiest way to address this is just set sync_read before
snapshot_write_next() returns if handle->buffer == buffer.
Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes:
8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Geffon [Thu, 21 Sep 2023 17:00:45 +0000 (13:00 -0400)]
PM: hibernate: Use __get_safe_page() rather than touching the list
commit
f0c7183008b41e92fa676406d87f18773724b48b upstream.
We found at least one situation where the safe pages list was empty and
get_buffer() would gladly try to use a NULL pointer.
Signed-off-by: Brian Geffon <bgeffon@google.com>
Fixes:
8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Biju Das [Thu, 27 Jul 2023 08:18:44 +0000 (09:18 +0100)]
dt-bindings: timer: renesas,rz-mtu3: Fix overflow/underflow interrupt names
commit
b7a8f1f7a8a25e09aaefebb6251a77f44cda638b upstream.
As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
interrupt names starts with 'tci' instead of 'tgi'.
Fix this documentation issue by replacing below overflow/underflow
interrupt names:
- tgiv0->tciv0
- tgiv1->tciv1
- tgiu1->tciu1
- tgiv2->tciv2
- tgiu2->tciu2
- tgiv3->tciv3
- tgiv4->tciv4
- tgiv6->tciv6
- tgiv7->tciv7
- tgiv8->tciv8
- tgiu8->tciu8
Fixes:
0a9d6b54297e ("dt-bindings: timer: Document RZ/G2L MTU3a bindings")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh Viswanathan [Mon, 4 Sep 2023 17:25:13 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq6018: Fix hwlock index for SMEM
commit
95d97b111e1e184b0c8656137033ed64f2cf21e4 upstream.
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
in SMEM region shared by the Host and FW.
Fix the SMEM hwlock index to 3 for IPQ6018.
Cc: stable@vger.kernel.org
Fixes:
5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230904172516.479866-3-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Fernandes (Google) [Tue, 5 Sep 2023 00:02:11 +0000 (00:02 +0000)]
rcu/tree: Defer setting of jiffies during stall reset
commit
b96e7a5fa0ba9cda32888e04f8f4bac42d49a7f8 upstream.
There are instances where rcu_cpu_stall_reset() is called when jiffies
did not get a chance to update for a long time. Before jiffies is
updated, the CPU stall detector can go off triggering false-positives
where a just-started grace period appears to be ages old. In the past,
we disabled stall detection in rcu_cpu_stall_reset() however this got
changed [1]. This is resulting in false-positives in KGDB usecase [2].
Fix this by deferring the update of jiffies to the third run of the FQS
loop. This is more robust, as, even if rcu_cpu_stall_reset() is called
just before jiffies is read, we would end up pushing out the jiffies
read by 3 more FQS loops. Meanwhile the CPU stall detection will be
delayed and we will not get any false positives.
[1] https://lore.kernel.org/all/
20210521155624.174524-2-senozhatsky@chromium.org/
[2] https://lore.kernel.org/all/
20230814020045.51950-2-chenhuacai@loongson.cn/
Tested with rcutorture.cpu_stall option as well to verify stall behavior
with/without patch.
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Closes: https://lore.kernel.org/all/
20230814020045.51950-2-chenhuacai@loongson.cn/
Suggested-by: Paul McKenney <paulmck@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes:
a80be428fbc1 ("rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Tue, 10 Oct 2023 17:23:41 +0000 (13:23 -0400)]
svcrdma: Drop connection after an RDMA Read error
commit
197115ebf358cb440c73e868b2a0a5ef728decc6 upstream.
When an RPC Call message cannot be pulled from the client, that
is a message loss, by definition. Close the connection to trigger
the client to resend.
Cc: <stable@vger.kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Tue, 17 Oct 2023 08:43:38 +0000 (10:43 +0200)]
wifi: wilc1000: use vmm_table as array in wilc struct
commit
05ac1a198a63ad66bf5ae8b7321407c102d40ef3 upstream.
Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:
BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr
c3a61540 by task wlan0-tx/95
KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)
Fixes:
40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Thu, 21 Sep 2023 14:23:34 +0000 (16:23 +0200)]
PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
commit
c9260693aa0c1e029ed23693cfd4d7814eee6624 upstream.
Commit
ac91e6980563 ("PCI: Unify delay handling for reset and resume")
shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100
msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required
for Conventional PCI.
But it turns out that there are PCIe devices which require a longer delay
than prescribed before first config space access after reset recovery or
resume from D3cold:
Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator
"raises a PCI system error (PERR), as reported by the IPMI event log, and
the hardware itself would suffer a catastrophic event, cycling the server"
unless the longer delay is observed.
The card is specified to conform to PCIe r1.0 and indeed only supports Gen1
speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same
100 msec delay as PCIe r6.1 sec 6.6.1:
To allow components to perform internal initialization, system software
must wait for at least 100 ms from the end of a reset (cold/warm/hot)
before it is permitted to issue Configuration Requests
The behavior of the Torrent QN16e card thus appears to be a quirk. Treat
it as such and lengthen the reset delay for this specific device.
Fixes:
ac91e6980563 ("PCI: Unify delay handling for reset and resume")
Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de
Reported-by: Chad Schroeder <CSchroeder@sonifi.com>
Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/
Tested-by: Chad Schroeder <CSchroeder@sonifi.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Sun, 1 Oct 2023 17:02:51 +0000 (19:02 +0200)]
PCI: exynos: Don't discard .remove() callback
commit
83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream.
With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:
WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)
(with ARCH=x86_64 W=1 allmodconfig).
Fixes:
340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Sun, 1 Oct 2023 17:02:52 +0000 (19:02 +0200)]
PCI: kirin: Don't discard .remove() callback
commit
3064ef2e88c1629c1e67a77d7bc20020b35846f2 upstream.
With CONFIG_PCIE_KIRIN=y and kirin_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:
drivers/pci/controller/dwc/pcie-kirin: section mismatch in reference: kirin_pcie_driver+0x8 (section: .data) -> kirin_pcie_remove (section: .exit.text)
(with ARCH=x86_64 W=1 allmodconfig).
Fixes:
000f60db784b ("PCI: kirin: Add support for a PHY layer")
Link: https://lore.kernel.org/r/20231001170254.2506508-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Wed, 11 Oct 2023 07:46:45 +0000 (09:46 +0200)]
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
commit
8e37372ad0bea4c9b4712d9943f6ae96cff9491f upstream.
aspm_attr_store_common(), which handles sysfs control of ASPM, has the same
problem as
fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x
substates) to the "aspm_disable" mask.
Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the
disable mask. Since disabling L1 via sysfs doesn't add any of the
substates to the disable mask, enabling L1.1 actually enables *all* the
substates.
In this scenario:
- Write 0 to "l1_aspm" to disable L1
- Write 1 to "l1_1_aspm" to enable L1.1
the intention is to disable L1 and all L1.x substates, then enable just
L1.1, but in fact, *all* L1.x substates are enabled.
Fix this by explicitly disabling all the L1.x substates when disabling L1.
Fixes:
72ea91afbfb0 ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states")
Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Wed, 25 Oct 2023 13:00:29 +0000 (18:30 +0530)]
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
commit
a07d2497ed657eb2efeb967af47e22f573dcd1d6 upstream.
The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.
On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.
So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.
Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.
[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes:
f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bean Huo [Mon, 30 Oct 2023 22:48:09 +0000 (23:48 +0100)]
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
commit
ed9009ad300c0f15a3ecfe9613547b1962bde02c upstream.
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache
operation be allowed only after a write has occurred. Otherwise, the
cache flush command or subsequent commands will time out.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nitin Yadav [Thu, 26 Oct 2023 06:14:58 +0000 (11:44 +0530)]
mmc: sdhci_am654: fix start loop index for TAP value parsing
commit
71956d0cb56c1e5f9feeb4819db87a076418e930 upstream.
ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
are currently ignored for all SD/MMC and eMMC modes. Fix this
by making start loop index to MMC_TIMING_LEGACY.
Fixes:
8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026061458.1116276-1-n-yadav@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 2 Nov 2023 07:51:06 +0000 (10:51 +0300)]
mmc: vub300: fix an error code
commit
b44f9da81783fda72632ef9b0d05ea3f3ca447a5 upstream.
This error path should return -EINVAL instead of success.
Fixes:
88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/0769d30c-ad80-421b-bf5d-7d6f5d85604e@moroto.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Sun, 5 Nov 2023 03:46:24 +0000 (12:46 +0900)]
ksmbd: fix slab out of bounds write in smb_inherit_dacl()
commit
eebff19acaa35820cb09ce2ccb3d21bee2156ffb upstream.
slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22271
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 7 Nov 2023 12:04:31 +0000 (21:04 +0900)]
ksmbd: handle malformed smb1 message
commit
5a5409d90bd05f87fe5623a749ccfbf3f7c7d400 upstream.
If set_smb1_rsp_status() is not implemented, It will cause NULL pointer
dereferece error when client send malformed smb1 message.
This patch add set_smb1_rsp_status() to ignore malformed smb1 message.
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marios Makassikis [Sat, 14 Oct 2023 03:48:25 +0000 (12:48 +0900)]
ksmbd: fix recursive locking in vfs helpers
commit
807252f028c59b9a3bac4d62ad84761548c10f11 upstream.
Running smb2.rename test from Samba smbtorture suite against a kernel built
with lockdep triggers a "possible recursive locking detected" warning.
This is because mnt_want_write() is called twice with no mnt_drop_write()
in between:
-> ksmbd_vfs_mkdir()
-> ksmbd_vfs_kern_path_create()
-> kern_path_create()
-> filename_create()
-> mnt_want_write()
-> mnt_want_write()
Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs
helpers that call kern_path_create().
Full lockdep trace below:
============================================
WARNING: possible recursive locking detected
6.6.0-rc5 #775 Not tainted
--------------------------------------------
kworker/1:1/32 is trying to acquire lock:
ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410
but task is already holding lock:
ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sb_writers#5);
lock(sb_writers#5);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/1:1/32:
#0:
ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980
#1:
ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980
#2:
ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260
#3:
ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260
Cc: stable@vger.kernel.org
Fixes:
40b268d384a2 ("ksmbd: add mnt_want_write to ksmbd vfs functions")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kathiravan Thirumoorthy [Thu, 14 Sep 2023 06:59:52 +0000 (12:29 +0530)]
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
commit
99cd4935cb972d0aafb16838bb2aeadbcaf196ce upstream.
GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.
Cc: stable@vger.kernel.org
Fixes:
d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-2-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kathiravan Thirumoorthy [Thu, 14 Sep 2023 06:59:51 +0000 (12:29 +0530)]
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
commit
e641a070137dd959932c7c222e000d9d941167a2 upstream.
GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based
on the request from dependent clocks. Doing so will result in the
unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL
clocks.
Cc: stable@vger.kernel.org
Fixes:
b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-1-c8ceb1a37680@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Suchanek [Thu, 7 Sep 2023 16:52:19 +0000 (18:52 +0200)]
integrity: powerpc: Do not select CA_MACHINE_KEYRING
commit
3edc22655647378dea01900f7b04e017ff96bda9 upstream.
No other platform needs CA_MACHINE_KEYRING, either.
This is policy that should be decided by the administrator, not Kconfig
dependencies.
Cc: stable@vger.kernel.org # v6.6+
Fixes:
d7d91c4743c4 ("integrity: PowerVM machine keyring enablement")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Mon, 16 Oct 2023 22:05:27 +0000 (16:05 -0600)]
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
commit
5ad1e217a2b23aa046b241183bd9452d259d70d0 upstream.
`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
This could potentially lead to an overwrite of the objects following
`clk_data` in `struct visconti_pll_provider`, in this case
`struct device_node *node;`, at run-time:
drivers/clk/visconti/pll.h:
16 struct visconti_pll_provider {
17 void __iomem *reg_base;
18 struct clk_hw_onecell_data clk_data;
19 struct device_node *node;
20 };
Notice that a total of 56 bytes are allocated for flexible-array `hws`
at line 328. See below:
include/dt-bindings/clock/toshiba,tmpv770x.h:
14 #define TMPV770X_NR_PLL 7
drivers/clk/visconti/pll-tmpv770x.c:
69 ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL);
drivers/clk/visconti/pll.c:
321 struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np,
322 void __iomem *base,
323 unsigned long nr_plls)
324 {
325 struct visconti_pll_provider *ctx;
...
328 ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_plls), GFP_KERNEL);
`struct_size(ctx, clk_data.hws, nr_plls)` above translates to
sizeof(struct visconti_pll_provider) + sizeof(struct clk_hw *) * 7 ==
24 + 8 * 7 == 24 + 56
^^^^
|
allocated bytes for flex array `hws`
$ pahole -C visconti_pll_provider drivers/clk/visconti/pll.o
struct visconti_pll_provider {
void * reg_base; /* 0 8 */
struct clk_hw_onecell_data clk_data; /* 8 8 */
struct device_node * node; /* 16 8 */
/* size: 24, cachelines: 1, members: 3 */
/* last cacheline: 24 bytes */
};
And then, after the allocation, some data is written into all members
of `struct visconti_pll_provider`:
332 for (i = 0; i < nr_plls; ++i)
333 ctx->clk_data.hws[i] = ERR_PTR(-ENOENT);
334
335 ctx->node = np;
336 ctx->reg_base = base;
337 ctx->clk_data.num = nr_plls;
Fix all these by placing the declaration of object `clk_data` at the
end of `struct visconti_pll_provider`. Also, add a comment to make it
clear that this object must always be last in the structure, and
prevent this bug from being introduced again in the future.
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Fixes:
b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/57a831d94ee2b3889b11525d4ad500356f89576f.1697492890.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Tue, 24 Oct 2023 03:30:52 +0000 (21:30 -0600)]
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
commit
d761bb01c85b22d5b44abe283eb89019693f6595 upstream.
`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
This could potentially lead to an overwrite of the objects following
`clk_data` in `struct stratix10_clock_data`, in this case
`void __iomem *base;` at run-time:
drivers/clk/socfpga/stratix10-clk.h:
9 struct stratix10_clock_data {
10 struct clk_hw_onecell_data clk_data;
11 void __iomem *base;
12 };
There are currently three different places where memory is allocated for
`struct stratix10_clock_data`, including the flex-array `hws` in
`struct clk_hw_onecell_data`:
drivers/clk/socfpga/clk-agilex.c:
469 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470 num_clks), GFP_KERNEL);
drivers/clk/socfpga/clk-agilex.c:
509 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
510 num_clks), GFP_KERNEL);
drivers/clk/socfpga/clk-s10.c:
400 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
401 num_clks), GFP_KERNEL);
I'll use just one of them to describe the issue. See below.
Notice that a total of 440 bytes are allocated for flexible-array member
`hws` at line 469:
include/dt-bindings/clock/agilex-clock.h:
70 #define AGILEX_NUM_CLKS 55
drivers/clk/socfpga/clk-agilex.c:
459 struct stratix10_clock_data *clk_data;
460 void __iomem *base;
...
466
467 num_clks = AGILEX_NUM_CLKS;
468
469 clk_data = devm_kzalloc(dev, struct_size(clk_data, clk_data.hws,
470 num_clks), GFP_KERNEL);
`struct_size(clk_data, clk_data.hws, num_clks)` above translates to
sizeof(struct stratix10_clock_data) + sizeof(struct clk_hw *) * 55 ==
16 + 8 * 55 == 16 + 440
^^^
|
allocated bytes for flex-array `hws`
474 for (i = 0; i < num_clks; i++)
475 clk_data->clk_data.hws[i] = ERR_PTR(-ENOENT);
476
477 clk_data->base = base;
and then some data is written into both `hws` and `base` objects.
Fix this by placing the declaration of object `clk_data` at the end of
`struct stratix10_clock_data`. Also, add a comment to make it clear
that this object must always be last in the structure.
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Fixes:
ba7e258425ac ("clk: socfpga: Convert to s10/agilex/n5x to use clk_hw")
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/1da736106d8e0806aeafa6e471a13ced490eae22.1698117815.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Tue, 24 Oct 2023 19:17:19 +0000 (22:17 +0300)]
powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
commit
a60ec4485f1c72dfece365cf95e6de82bdd74300 upstream.
Before the refactoring the pr_warn() only triggered when
someone explicitly tried to write to a BIOS locked limit.
After the refactoring the warning is also triggering during
system resume. The user can't do anything about this so
printing scary warnings doesn't make sense
Keep the printk but make it pr_debug() instead of pr_warn()
to make it clear it's not a serious issue.
Fixes:
9050a9cd5e4c ("powercap: intel_rapl: Cleanup Power Limits support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Marangi [Tue, 24 Oct 2023 18:30:14 +0000 (20:30 +0200)]
cpufreq: stats: Fix buffer overflow detection in trans_stats()
commit
ea167a7fc2426f7685c3735e104921c1a20a6d3f upstream.
Commit
3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential
buffer overflow") switched from snprintf to the more secure scnprintf
but never updated the exit condition for PAGE_SIZE.
As the commit say and as scnprintf document, what scnprintf returns what
is actually written not counting the '\0' end char. This results in the
case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be
written at max PAGE_SIZE - 1 (as '\0' is not counted)
Because of len is never set to PAGE_SIZE, the function never break early,
never prints the warning and never return -EFBIG.
Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger
the error.
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Fixes:
3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>