Lubomir Rintel [Thu, 21 Jan 2021 03:41:24 +0000 (04:41 +0100)]
ARM: dts: mmp3: Extend the MPMU reg range
The ACGR register is at the offset of 0x1024, beyond the 4k originally
assigned to the MPMU range.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-7-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:23 +0000 (04:41 +0100)]
ARM: dts: mmp3-dell-ariel: Drop linux,usable-memory from /memory
Drop the linux,usable-memory properties; the schema is unhappy about
them.
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-6-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:22 +0000 (04:41 +0100)]
ARM: dts: mmp2-olpc-xo-1-75: Drop linux,usable-memory from /memory
Drop the linux,usable-memory properties; the schema is unhappy about
them:
mmp2-olpc-xo-1-75.dt.yaml: /: memory: False schema does not allow
{'linux,usable-memory': [[0,
528482304]],
'available': [[847872,
519245824, 4096, 782336]],
'reg': [[0,
536870912]], 'device_type': ['memory']}
They've been cargo-culted from Open Firmware and I don't know what
purpose they serve. Perhaps they are meant to provide the OFW runtime.
In that case it's still okay to drop them from here; OFW is welcome to add
it upon boot.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-5-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:21 +0000 (04:41 +0100)]
ARM: dts: mmp2-olpc-xo-1-75: Fix memory node name
It contains a reg property. Add its base to the node name.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-4-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:20 +0000 (04:41 +0100)]
media: dt-bindings: marvell,mmp2-ccic: Allow power-domains property
On MMP3 the camera interface is on a separate power island. This
property tells the driver to enable it when appropriate.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-3-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubomir Rintel [Thu, 21 Jan 2021 03:41:19 +0000 (04:41 +0100)]
dt-bindings: gpio: mrvl-gpio: Fix the gpio-ranges property
The property specifies a list of GPIO-capable pins. Don't limit it to a
single element as there's presumably more than one GPIO pin.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20210121034130.1381872-2-lkundrak@v3.sk'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 17:03:54 +0000 (18:03 +0100)]
Merge tag 'mvebu-dt64-5.12-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.12 (part 1)
- rename u-boot mtd partition to a53-firmware on Turris Mox (Armada 3720 based)
- improve SDHCI support on AP807 based board
- move SATA comphy into main armada-37xx.dtsi
- add Armada 8K/7K PWM support
* tag 'mvebu-dt64-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: armada: add pwm offsets for ap/cp gpios
arm64: dts: marvell: armada-37xx: Add SATA comphy into main armada-37xx.dtsi file
arm64: dts: cn913x-db: enable MMC HS400
arm64: dts: change AP807 SDHCI compatibility string
arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware
Link: https://lore.kernel.org/r/87pn1jn48s.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 17:02:48 +0000 (18:02 +0100)]
Merge tag 'mvebu-dt-5.12-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.12 (part 1)
Improve LED and fan support on Helios4 boad (Armada 388 based)
Add ECC configuration for Linksys board (Aramda 385 based)
* tag 'mvebu-dt-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada388-helios4: assign pinctrl to each fan
ARM: dts: armada388-helios4: assign pinctrl to LEDs
ARM: dts: armada-385-linksys: fix usage with newer devices
Link: https://lore.kernel.org/r/87sg6fn49o.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 17:00:48 +0000 (18:00 +0100)]
Merge tag 'v5.11-next-dts64' of git://git./linux/kernel/git/matthias.bgg/linux into arm/dt
mt6779:
- add DEVAPC node to detect mallicious bus accesses
- add PMIC wrapper node
mt7622:
- add reset to mmc node
mt8183:
- fix typo in drma-fifo-size property
- refine compatible for the disp-gamma
- add phandel of PM domain to the PWM node
- add second PWM node
- add regulator to MFG power domain
- enable DSI node in kukui
- add krane sku0, which uses different panel
- fix mailbox dt-bindings include path
mt8192:
- add NOR flash node
- add PSCI based CPU idle states
mt8516:
- add node for the UART's APDMA controller
* tag 'v5.11-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Fix GCE include path
dts64: mt7622: fix slow sd card access
dt-bindings: arm64: dts: mediatek: Add krane sku0
arm64: dts: mt8183: Add krane-sku0 board.
arm64: dts: mt8183: config dsi node
arm64: dts: mt6779: Support pwrap on Mediatek MT6779 platform
arm64: dts: mt6779: Support devapc
arm64: dts: mt8192: Add cpu-idle-states
arm64: dts: mediatek: mt8183: Add domain supply for mfg
arm64: dts: mt8192: add nor_flash device node
arm64: dts: mediatek: mt8516: add support for APDMA
arm64: dts: mediatek: mt8183-evb: add PWM support
arm64: dts: mediatek: mt8183: add pwm node
arm64: dts: mt8183: Add missing power-domain for pwm0 node
arm64: dts: mt8183: refine gamma compatible name
arm64: dts: mt8183: rename rdma fifo size
Link: https://lore.kernel.org/r/565be0cc-460a-7d0b-47da-09bf0401e8fe@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Walleij [Mon, 1 Feb 2021 09:13:08 +0000 (10:13 +0100)]
ARM: dts: ux500: Add Flash LEDs to Samsung phones
This adds the Richtek RT8515 Flash LED to the Golden,
Skomer and Janice device trees.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210201091308.284465-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:59:35 +0000 (17:59 +0100)]
Merge tag 'keystone_dts_for_5.12' of git://git./linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: DTS: Keystone update for v5.12
Contains couple updates for DWC USB3 DT nodes
* tag 'keystone_dts_for_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
arm: dts: keystone: Harmonize DWC USB3 DT nodes name
arm: dts: keystone: Correct DWC USB3 compatible string
Link: https://lore.kernel.org/r/1612156910-11159-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:58:32 +0000 (17:58 +0100)]
Merge tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.12 please pull the following:
- Rafal continues to add support for the 4906/4908 SoC family and adds
a Device Tree for the Netgear R8000P router (4906-based), describes
the NAND controller of the 4908 more appropriately (based on the older
63138 DSL SoC), describes the 4908 PCIe reset controller, internal
Ethernet switch (Starfighter 2 switch) and finally the Power
Management Bus (PMB)
- Scott removes all of the SATA-related Device Tree nodes since SATA
is unused on the Stingray product line
* tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Remove SATA from Stingray
arm64: dts: broadcom: bcm4908: describe PMB block
arm64: dts: broadcom: bcm4908: describe internal switch
arm64: dts: broadcom: bcm4908: describe PCIe reset controller
arm64: dts: broadcom: bcm4908: use proper NAND binding
arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files
dt-bindings: arm: bcm: document Netgear R8000P binding
Link: https://lore.kernel.org/r/20210131221721.685974-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:57:14 +0000 (17:57 +0100)]
Merge tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.12, please pull the following:
- Dave adds a proper compatile string for the DSI1 panel on 2711
(Raspberry Pi 4) to permit adequate driver differentiation
- Nicolas declares reserved memory regions filed by the Rasbperry Pi
bootloader to indicate the running system configuration
- Maxime declares the BSC (HDMI I2C controller) and CEC interrupt
controllers
- Stanislav fixes a tab vs. space issue in the BCM21664 DTS
* tag 'arm-soc/for-5.12/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Add the CEC interrupt controller
ARM: dts: bcm21664: Replace spaces with a tab
ARM: dts: bcm2711: Add the BSC interrupt controller
ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration
ARM: dts: bcm2711: Use compatible string for BCM2711 DSI1
Link: https://lore.kernel.org/r/20210131221721.685974-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:53:02 +0000 (17:53 +0100)]
Merge tag 'sunxi-dt-for-5.12' of git://git./linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: dts: sunxi: Rename nmi_intc to r_intc
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
arm64: dts: allwinner: pinetab: Fix the panel compatible
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
ARM: dts: sun8i-a83t: Remove empty CSI port
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
ARM: dts: sunxi: Fix CPU thermal zone node name
ARM: dts: sunxi: Add missing backlight supply
ARM: dts: sunxi: Fix the LED node names
dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
dt-bindings: iio: adc: Add AXP803 compatible
dt-bindings: sunxi: Fix the pinecube compatible
ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
...
Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 2 Feb 2021 16:49:21 +0000 (17:49 +0100)]
Merge tag 'ti-k3-dt-for-v5.12' of git://git./linux/kernel/git/nmenon/linux into arm/dt
Devicetree changes for TI K3 platforms for v5.12 merge window:
- Common fixups: PMU compatible, MMC dtbs_check warnings squelch
- J7200: R5F, PCIe, SERDES support
- J721E: PCIE fixups
* tag 'ti-k3-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: dts: ti: k3*: Fixup PMU compatibility to be CPU specific
arm64: dts: ti: k3: mmc: fix dtbs_check warnings
arm64: dts: ti: k3-j7200-som-p0: Add DDR carveout memory nodes for R5Fs
arm64: dts: ti: k3-j7200-som-p0: Add mailboxes to R5Fs
arm64: dts: ti: k3-j7200: Add R5F cluster nodes
arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe
arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j7200-main: Add PCIe device tree node
arm64: dts: ti: k3-j7200-main: Add SERDES and WIZ device tree node
arm64: dts: ti: k3-j721e-main: Remove "syscon" nodes added for pcieX_ctrl
arm64: dts: ti: k3-j721e-main: Fix supported max outbound regions
Link: https://lore.kernel.org/r/20210130131422.yvq2edxfongys7x5@pendant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Matthias Brugger [Sun, 31 Jan 2021 10:17:26 +0000 (11:17 +0100)]
arm64: dts: mt8183: Fix GCE include path
The header file of GCE should be for MT8183 SoC instead of MT8173.
Fixes:
91f9c963ce79 ("arm64: dts: mt8183: Add display nodes for MT8183")
Reported-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20210131101726.804-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Samuel Holland [Mon, 18 Jan 2021 05:50:35 +0000 (23:50 -0600)]
ARM: dts: sunxi: Rename nmi_intc to r_intc
The R_INTC block controls more than just the NMI, and it is a different
hardware block than the NMI INTC found in some other Allwinner SoCs, so
the label "nmi_intc" is inaccurate. Name it "r_intc" to match the
compatible and to match the few references in the vendor documentation.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210118055040.21910-6-samuel@sholland.org
Jernej Skrabec [Sat, 16 Jan 2021 10:37:10 +0000 (11:37 +0100)]
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
Bluetooth module on BananaPi M2 Zero can also be used for streaming
audio. However, for that case higher UART speed is required.
Add a max-speed property.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210116103710.245617-1-jernej.skrabec@siol.net
Jernej Skrabec [Sat, 16 Jan 2021 10:52:28 +0000 (11:52 +0100)]
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
Bluetooth module on BananaPi M2 Plus can also be used for streaming
audio. However, for that case higher UART speed is required.
Add a max-speed property.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210116105228.847073-1-jernej.skrabec@siol.net
Maxime Ripard [Thu, 14 Jan 2021 11:35:38 +0000 (12:35 +0100)]
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
The commit
53441b8ef7de ("arm64: dts: allwinner: h6: PineH64 model B:
Add bluetooth") introduced the Bluetooth chip for the PineH64 model B,
but the GPIOs property didn't conform to the binding of the bluetooth
chip. Let's fix this.
Fixes:
53441b8ef7de ("arm64: dts: allwinner: h6: PineH64 model B: Add bluetooth")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-19-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:37 +0000 (12:35 +0100)]
arm64: dts: allwinner: pinetab: Fix the panel compatible
The commit
7fa40ca7ef61 ("arm64: allwinner: dts: a64: add DT for Early
Adopter's PineTab") introduced an ili9881-based panel device node but
didn't conform to the binding. Fix this.
Fixes:
7fa40ca7ef61 ("arm64: allwinner: dts: a64: add DT for Early Adopter's PineTab")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-18-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:36 +0000 (12:35 +0100)]
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
The stk3311 binding don't expect a vdd or leda power supplies. Remove
them.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-17-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:35 +0000 (12:35 +0100)]
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
DTC and the dt-validate tools report warnings for opp with the format
opp@$frequency: dtc for a missing reg property, and dt-validate since
the binding requires child nodes to have the format opp-$frequency.
Change this to the latter format.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-16-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:34 +0000 (12:35 +0100)]
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
The SinA33 panel is missing its power-supply property, even though the
binding mandates it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-15-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:33 +0000 (12:35 +0100)]
ARM: dts: sun8i-a83t: Remove empty CSI port
The empty CSI port triggers a dt-validate warning. Let's align with the
other DTSI and remove it entirely, expecting the DTS to fill it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-14-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:32 +0000 (12:35 +0100)]
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
Our CSI endpoint trigger some DTC warnings due to the fact that we're
having a single endpoint that doesn't need any reg property, and since
we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.
Fix those
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-13-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:31 +0000 (12:35 +0100)]
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
While the USB PHY Device Tree mandates that the name of the ID detect pin
should be usb0_id_det-gpios, a significant number of device tree use
usb0_id_det-gpio instead.
This was functional because the GPIO framework falls back to the gpio
suffix that is legacy, but we should fix this.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-12-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:30 +0000 (12:35 +0100)]
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
Even though it translates to the same thing down to the binary level, we
should have an array of 2 number cells to describe each voltage state,
which in turns create a validation warning.
Let's fix this.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-11-maxime@cerno.tech
Maxime Ripard [Thu, 14 Jan 2021 11:35:29 +0000 (12:35 +0100)]
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
The mma8452 binding doesn't expect an io-channel-cells property, let's
remove it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-10-maxime@cerno.tech
Frank Wunderlich [Wed, 13 Jan 2021 18:09:19 +0000 (19:09 +0100)]
dts64: mt7622: fix slow sd card access
Fix extreme slow speed (200MB takes ~20 min) on writing sdcard on
bananapi-r64 by adding reset-control for mmc1 like it's done for mmc0/emmc.
Fixes:
2c002a3049f7 ("arm64: dts: mt7622: add mmc related device nodes")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210113180919.49523-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Hsin-Yi Wang [Wed, 13 Jan 2021 11:04:03 +0000 (19:04 +0800)]
dt-bindings: arm64: dts: mediatek: Add krane sku0
Krane-sku0 is similar to krane-sku176 but using a different panel
source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210113110400.616319-3-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Hsin-Yi Wang [Wed, 13 Jan 2021 11:04:01 +0000 (19:04 +0800)]
arm64: dts: mt8183: Add krane-sku0 board.
Similar to krane-sku176 but using a different panel source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210113110400.616319-2-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Hsin-Yi Wang [Wed, 13 Jan 2021 11:03:59 +0000 (19:03 +0800)]
arm64: dts: mt8183: config dsi node
Config dsi node for mt8183 kukui. Set panel and ports.
Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20210113110400.616319-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Argus Lin [Mon, 4 Jan 2021 08:08:22 +0000 (16:08 +0800)]
arm64: dts: mt6779: Support pwrap on Mediatek MT6779 platform
Support pwrap on Mediatek MT6779 platform by adding pwrap node in dts file.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Link: https://lore.kernel.org/r/1609747703-27207-2-git-send-email-argus.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Neal Liu [Wed, 23 Dec 2020 08:44:51 +0000 (16:44 +0800)]
arm64: dts: mt6779: Support devapc
Support DEVAPC on MT6779 platforms by adding device node.
Signed-off-by: Neal Liu <neal.liu@mediatek.com>
Reviewed-by: Hanks Chen <hanks.chen@mediatek.com>
Link: https://lore.kernel.org/r/1608713092-26952-2-git-send-email-neal.liu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
James Liao [Tue, 22 Dec 2020 04:58:20 +0000 (12:58 +0800)]
arm64: dts: mt8192: Add cpu-idle-states
Add idle states for cpu-off and cluster-off.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Link: https://lore.kernel.org/r/20201222045820.26355-1-jamesjj.liao@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Hsin-Yi Wang [Fri, 29 Jan 2021 10:12:08 +0000 (18:12 +0800)]
arm64: dts: mediatek: mt8183: Add domain supply for mfg
Add domain supply node.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210129101208.2625249-4-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
bayi cheng [Wed, 23 Dec 2020 04:22:59 +0000 (12:22 +0800)]
arm64: dts: mt8192: add nor_flash device node
add nor_flash device node
Signed-off-by: bayi cheng <bayi.cheng@mediatek.com>
Link: https://lore.kernel.org/r/1608697379-22025-1-git-send-email-bayi.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fabien Parent [Wed, 9 Dec 2020 11:47:36 +0000 (12:47 +0100)]
arm64: dts: mediatek: mt8516: add support for APDMA
Add support the APDMA IP on MT8516. APDMA is a DMA controller
for UARTs.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20201209114736.70625-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Arnd Bergmann [Sat, 30 Jan 2021 12:01:52 +0000 (13:01 +0100)]
Merge tag 'tegra-for-5.12-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: tegra: Changes for v5.12-rc1
Exposed a new QSPI clock to DT on Tegra210 and documents the eMMC SKU of
the Jetson Xavier NX board.
* tag 'tegra-for-5.12-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Document Jetson Xavier NX eMMC SKU
Link: https://lore.kernel.org/r/20210129193254.3610492-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 30 Jan 2021 11:12:13 +0000 (12:12 +0100)]
Merge tag 'tegra-for-5.12-arm64-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.12-rc1
Fixes an issue with HDA codec detection by properly wiring up the
power-domain for the HDA controller. This also fixes one of the USB-C
ports on Jetson AGX Xavier and enables support for audio on various
Tegra210, Tegra186 and Tegra194 boards. The Jetson Nano and Jetson TX1
also gain QSPI support.
* tag 'tegra-for-5.12-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Audio graph sound card for Jetson AGX Xavier
arm64: tegra: Audio graph sound card for Jetson TX2
Revert "arm64: tegra: Disable the ACONNECT for Jetson TX2"
arm64: tegra: Add RT5658 device entry
arm64: tegra: Add support for Jetson Xavier NX with eMMC
arm64: tegra: Prepare for supporting the Jetson Xavier NX with eMMC
arm64: tegra: Enable QSPI on Jetson Xavier NX
arm64: tegra: Add QSPI nodes on Tegra194
arm64: tegra: Enable QSPI on Jetson Nano
arm64: tegra: Audio graph sound card for Jetson Nano and TX1
arm64: tegra: Audio graph header for Tegra210
arm64: tegra: Order nodes alphabetically on Tegra210
arm64: tegra: Enable Jetson-Xavier J512 USB host
arm64: tegra: Add XUSB pad controller's "nvidia,pmc" property on Tegra210
arm64: tegra: Add power-domain for Tegra210 HDA
dt-bindings: clock: tegra: Add clock ID TEGRA210_CLK_QSPI_PM
Link: https://lore.kernel.org/r/20210129193254.3610492-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 30 Jan 2021 11:11:37 +0000 (12:11 +0100)]
Merge tag 'tegra-for-5.12-arm-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.12-rc1
Fixes the pinmux configuration for the eMMC on the Ouya to fix issues
with certain bootloaders.
* tag 'tegra-for-5.12-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: ouya: Fix eMMC on specific bootloaders
Link: https://lore.kernel.org/r/20210129193254.3610492-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sameer Pujar [Fri, 29 Jan 2021 11:41:10 +0000 (17:11 +0530)]
arm64: tegra: Audio graph sound card for Jetson AGX Xavier
Enable support for audio-graph based sound card on Jetson AGX Xavier.
Following I/O interfaces are enabled.
* I2S1, I2S2, I2S4 and I2S6
* DMIC3
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Fri, 29 Jan 2021 11:41:09 +0000 (17:11 +0530)]
arm64: tegra: Audio graph sound card for Jetson TX2
Enable support for audio-graph based sound card on Jetson TX2. Based
on the board design following I/O modules are enabled.
* All I2S instances (I2S1 ... I2S6)
* All DSPK instances (DSPK1, DSPK2)
* DMIC1, DMIC2 and DMIC3
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Fri, 29 Jan 2021 11:41:08 +0000 (17:11 +0530)]
Revert "arm64: tegra: Disable the ACONNECT for Jetson TX2"
This reverts commit
fb319496935b ("arm64: tegra: Disable the
ACONNECT for Jetson TX2").
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Fri, 29 Jan 2021 11:41:07 +0000 (17:11 +0530)]
arm64: tegra: Add RT5658 device entry
Jetson AGX Xavier has an on-board audio codec whicn is connected to
Tegra I2S1 interface. Hence add corresponding device node for the
audio codec.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fabien Parent [Wed, 9 Dec 2020 12:03:21 +0000 (13:03 +0100)]
arm64: dts: mediatek: mt8183-evb: add PWM support
Enable the pwm driver and set the pinctrl for PWM A line.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20201209120322.137610-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fabien Parent [Wed, 9 Dec 2020 12:03:20 +0000 (13:03 +0100)]
arm64: dts: mediatek: mt8183: add pwm node
MT8183 SoC has 4 PWMs. Add the pwm node in order to support them.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20201209120322.137610-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Peter Geis [Thu, 7 Jan 2021 16:56:59 +0000 (16:56 +0000)]
ARM: tegra: ouya: Fix eMMC on specific bootloaders
Ouya fails to detect the eMMC module when booted via certain bootloaders.
Fastboot and hard-kexec bootloaders fail while u-boot does not. It was
discovered that the issue manifests if the sdmmc4 alternate configuration
clock pin is input disabled.
Ouya uses sdmmc4 in the primary pin configuration. It is unknown why this
occurs, though it is likely related to other eMMC limitations experienced
on Ouya.
For now, fix it by enabling input on cam_mclk_pcc0.
Fixes:
d7195ac5c9c5 ("ARM: tegra: Add device-tree for Ouya")
Reported-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 28 Jan 2021 18:29:40 +0000 (19:29 +0100)]
dt-bindings: arm: tegra: Document Jetson Xavier NX eMMC SKU
Two different SKUs exist for the Jetson Xavier NX module, so document
the compatible strings for both, as well as the developer kits that come
with each of the SKUs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Baruch Siach [Mon, 11 Jan 2021 11:46:28 +0000 (13:46 +0200)]
arm64: dts: armada: add pwm offsets for ap/cp gpios
The 'marvell,pwm-offset' property of both GPIO blocks (per CP component)
point to the same counter registers offset. The driver will decide how
to use counters A/B.
This is different from the convention of pwm on earlier Armada series
(370/38x). On those systems the assignment of A/B counters to GPIO
blocks is coded in both DT and the driver. The actual behaviour of the
current driver on Armada 8K/7K is the same as earlier systems.
Add also clock properties for base pwm frequency reference.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Pali Rohár [Mon, 18 Jan 2021 09:31:39 +0000 (10:31 +0100)]
arm64: dts: marvell: armada-37xx: Add SATA comphy into main armada-37xx.dtsi file
SATA on A3720 SOC can use only comphy2, so move this definition from board
specific DTS file armada-3720-espressobin.dtsi into main A3720 SOC file
armada-37xx.dtsi.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Marcin Wojtas [Tue, 12 Jan 2021 09:46:55 +0000 (11:46 +0200)]
arm64: dts: cn913x-db: enable MMC HS400
This patch adds necessary flags in the device tree
which enable HS400 mode on AP807 MMC controller
on the CN913x-DB board.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Konstantin Porotchkin [Tue, 12 Jan 2021 09:46:54 +0000 (11:46 +0200)]
arm64: dts: change AP807 SDHCI compatibility string
This patch adds new compatible string to AP807 DTSI to avoid
its SDHCI controller to run in "slow mode" with disabled UHS.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Marek Behún [Mon, 11 Jan 2021 02:12:43 +0000 (03:12 +0100)]
arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware
The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.
Rename this parition to "a53-firmware" to avoid confusion for users,
since they cannot simply build U-Boot from U-Boot repository and flash
the resulting image there. Instead they have to build the firmware with
the sources from the mox-boot-builder repository [1] and flash the
a53-firmware.bin binary there.
[1] https://gitlab.nic.cz/turris/mox-boot-builder
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes:
7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Arnd Bergmann [Fri, 29 Jan 2021 15:31:24 +0000 (16:31 +0100)]
Merge tag 'omap-for-v5.12/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.12 merge window
This includes the following earlier patches that were considered too
late for v5.11 as discussed between Arnd and me on freenode #armlinux
in December:
- More updates to use cpsw switchdev driver
- Enable gta04 PMIC power management
- Updates for dra7 for ECC support, 1.8GHz speed and keep the
ldo0 regulator always on as specified in the data manual
And then we have the new devicetree changes:
- Configure the original Amazon Echo to for audio
- Configure missing thermal interrupt for omap4430
- Configure mapphone devices for passive thermal cooling, and add
1.2GHz mode.
- Correct omap4430 sgx clock rate to use the runtime Android kernel
value, the earlier value was for a lower power operating point
- Drop turbo mode for 1GHz omap3 variants as we now have passive
cooling configured
- Update email address for Javier
- Add new MYIR Tech Limited board support
* tag 'omap-for-v5.12/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited board
ARM: dts: omap3-igep: Change email address in copyright notice
ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
ARM: dts: motorola-mapphone: Add 1.2GHz OPP
ARM: dts: motorola-mapphone: Configure lower temperature passive cooling
ARM: dts: Configure missing thermal interrupt for 4430
ARM: dts: omap3-echo: Add speaker sound card support
ARM: dts: dra71-evm: mark ldo0 regulator as always on
ARM: dts: dra76x: add support for OPP_PLUS
ARM: dts: am574x-idk: add support for EMIF1 ECC
ARM: dts: omap3-gta04: fix twl4030-power settings
ARM: dts: am335x-evm/evmsk/icev2: switch to new cpsw switch drv
ARM: dts: am33xx-l4: add dt node for new cpsw switchdev driver
Link: https://lore.kernel.org/r/pull-1611845066-809577@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 29 Jan 2021 15:29:19 +0000 (16:29 +0100)]
Merge tag 'stm32-dt-for-v5.12-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.12, round 1
Highlights:
----------
MCU part:
-Rename mmc nodes to match with yaml validation.
MPU part:
-Rename mmc nodes to match with yaml validation.
-Move vdda1v1 & vdda1v8 (used by usbphyc) from boards files
to SoC dtsi file.
-LXA:
-Fix leds schema for yaml validation.
-DH:
-Enable SDMMC1 internal pull-ups and disable CKIN feedabck clock
on DHCOM.
-Add SDMMC1 init state inorder to use some gpios during probing phase.
-Disable KS8851 and FMC on PicoITX board.
* tag 'stm32-dt-for-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add #clock-cells property to usbphyc node on stm32mp151
ARM: dts: stm32: remove usbphyc ports vdda1v1 & vdda1v8 on stm32mp15 boards
ARM: dts: stm32: add usbphyc vdda1v1 and vdda1v8 supplies on stm32mp151
ARM: dts: stm32: Add STM32MP1 I2C6 SDA/SCL pinmux
ARM: dts: stm32: Rename mmc controller nodes to mmc@
ARM: dts: stm32: Enable voltage translator auto-detection on DHCOM
ARM: dts: stm32: Add additional init state for SDMMC1 pins
ARM: dts: stm32: Disable KS8851 and FMC on PicoITX board
ARM: dts: stm32: Fix schema warnings for pwm-leds on lxa-mc1
ARM: dts: stm32: Disable SDMMC1 CKIN feedback clock on DHCOM
ARM: dts: stm32: Enable internal pull-ups for SDMMC1 on DHCOM SoM
ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
ARM: dts: stm32: Fix GPIO hog names on DHCOM
ARM: dts: stm32: Disable optional TSC2004 on DRC02 board
ARM: dts: stm32: Disable WP on DHCOM uSD slot
ARM: dts: stm32: Connect card-detect signal on DHCOM
ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect
Link: https://lore.kernel.org/r/5e8897a0-8f68-5e41-bfa0-ccdf1e23a3c1@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rosen Penev [Thu, 3 Dec 2020 02:23:21 +0000 (18:23 -0800)]
ARM: dts: armada388-helios4: assign pinctrl to each fan
Split up the pins for each fan. This is needed in order to control them
Fixes:
ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Rosen Penev [Thu, 3 Dec 2020 02:23:20 +0000 (18:23 -0800)]
ARM: dts: armada388-helios4: assign pinctrl to LEDs
Split up the pins to match earlier definitions. Allows LEDs to flash
properly.
Fixes:
ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Rosen Penev [Sat, 5 Dec 2020 00:54:36 +0000 (16:54 -0800)]
ARM: dts: armada-385-linksys: fix usage with newer devices
Newer Linksys boards might come with a Winbond W29N02GV which can be
configured in different ways. Make sure we configure it the same way
as the older chips so everything keeps working.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Arnd Bergmann [Fri, 29 Jan 2021 13:02:49 +0000 (14:02 +0100)]
Merge tag 'renesas-arm-dt-for-v5.12-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.12 (take two)
- Increase support (SPI, I2C, Ethernet, Serial, MMC) for the R-Car V3U
SoC on the Renesas Falcon board,
- Disable SD functions for plain eMMC,
- A minor fix.
* tag 'renesas-arm-dt-for-v5.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: beacon: Fix EEPROM compatible value
arm64: dts: renesas: falcon: Enable MMC
arm64: dts: renesas: r8a779a0: Add MMC node
arm64: dts: renesas: r8a779a0: Add HSCIF support
arm64: dts: renesas: falcon: Complete SCIF0 nodes
arm64: dts: renesas: r8a779a0: Add & update SCIF nodes
arm64: dts: renesas: falcon: Add Ethernet-AVB0 support
arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support
arm64: dts: renesas: falcon: Add I2C0,1,6 support
arm64: dts: renesas: r8a779a0: Add I2C nodes
arm64: dts: renesas: Disable SD functions for plain eMMC
arm64: dts: renesas: r8a779a0: Add MSIOF device nodes
Link: https://lore.kernel.org/r/20210129090815.2552425-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 29 Jan 2021 12:57:06 +0000 (13:57 +0100)]
Merge tag 'hisi-arm64-dt-for-5.12v2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon ARM64 DT updates for 5.12
- Further cleanups of the hisilicon DTS to align with the dtschema
- Add or update the I2C, pinctrl and reset nodes for Hikey970
* tag 'hisi-arm64-dt-for-5.12v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi3670.dtsi: add I2C settings
arm64: dts: hisilicon: hikey970-pinctrl.dtsi: add missing pinctrl settings
arm64: dts: hisilicon: hi3670.dtsi: add iomcu_rst
arm64: dts: hisilicon: delete unused property smmu-cb-memtype
arm64: dts: hisilicon: avoid irrelevant nodes being mistakenly identified as PHY nodes
arm64: dts: hisilicon: normalize the node name of the localbus
arm64: dts: hisilicon: normalize the node name of the module thermal
arm64: dts: hisilicon: place clock-names "bus" before "core"
arm64: dts: hisilicon: separate each group of data in the property "ranges"
Link: https://lore.kernel.org/r/6013D1C7.90902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mauro Carvalho Chehab [Fri, 15 Jan 2021 11:53:58 +0000 (12:53 +0100)]
arm64: dts: hisilicon: hi3670.dtsi: add I2C settings
The I2C buses are not declared at the device tree. As this will
be needed by further patches, add them, keeping all in
disabled state. Per-board settings can override it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Mauro Carvalho Chehab [Fri, 15 Jan 2021 11:53:57 +0000 (12:53 +0100)]
arm64: dts: hisilicon: hikey970-pinctrl.dtsi: add missing pinctrl settings
There are several pinctrl settings that are missing at this
DT file.
Also, the entries are out of order.
Add the missing bits, as they'll be required by the DRM driver - and
probably by other drivers not upstreamed yet.
Reorder the entres, adding the missing bits.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Mauro Carvalho Chehab [Fri, 15 Jan 2021 11:53:56 +0000 (12:53 +0100)]
arm64: dts: hisilicon: hi3670.dtsi: add iomcu_rst
This is required in order to support USB.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 18 Jan 2021 03:16:34 +0000 (11:16 +0800)]
arm64: dts: hisilicon: delete unused property smmu-cb-memtype
The "smmu-cb-memtype" is a private property developed by the Hisilicon
driver in the early stage and is not used now. So delete it.
Otherwise, below YAML check warnings are reported:
arch/arm64/boot/dts/hisilicon/hip06-d03.dt.yaml: iommu@
a0040000: \
'smmu-cb-memtype' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/hisilicon/hip07-d05.dt.yaml: iommu@
a0040000: \
'smmu-cb-memtype' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 18 Jan 2021 03:16:33 +0000 (11:16 +0800)]
arm64: dts: hisilicon: avoid irrelevant nodes being mistakenly identified as PHY nodes
Currently, the names of several nodes incorrectly match common PHY
provider schema. And the phy-provider.yaml requires them must have
property "#phy-cells". As a result, false positives similar to the
following are reported:
usb2-phy@120: '#phy-cells' is a required property
Change their names slightly so that they do not match pattern:
"^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 18 Jan 2021 03:16:32 +0000 (11:16 +0800)]
arm64: dts: hisilicon: normalize the node name of the localbus
Change the node name of the localbus to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'. This error
is detected by simple-bus.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 18 Jan 2021 03:16:31 +0000 (11:16 +0800)]
arm64: dts: hisilicon: normalize the node name of the module thermal
1. Change the node name of the thermal zone to match
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', add suffix "-thermal".
2. Change the node name of the trip point to match
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', delete character "@".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 18 Jan 2021 03:16:30 +0000 (11:16 +0800)]
arm64: dts: hisilicon: place clock-names "bus" before "core"
Look at the clock-names schema defined in arm,mali-utgard.yaml:
clock-names:
items:
- const: bus
- const: core
The "bus" needs to be placed before the "core".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 18 Jan 2021 03:16:29 +0000 (11:16 +0800)]
arm64: dts: hisilicon: separate each group of data in the property "ranges"
Do not write the "ranges" of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported:
soc: pcie@
a0090000:ranges: [[
33554432, 0,
2986344448, 0,
2986344448, 0, \
100597760,
16777216, 0, 0, 0,
3086942208, 0, 65536]] is not valid under \
any of the given schemas (Possible causes of the failure):
soc: pcie@
a0090000:ranges: [[
33554432, 0,
2986344448, 0,
2986344448, 0, \
100597760,
16777216, 0, 0, 0,
3086942208, 0, 65536]] is not of type 'boolean'
soc: pcie@
a0090000:ranges:0: [
33554432, 0,
2986344448, 0,
2986344448, 0, \
100597760,
16777216, 0, 0, 0,
3086942208, 0, 65536] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Amelie Delaunay [Thu, 14 Jan 2021 13:15:24 +0000 (14:15 +0100)]
ARM: dts: stm32: add #clock-cells property to usbphyc node on stm32mp151
usbphyc is a 48Mhz clock provider: the clock can be used as clock source
for USB OTG. Add #clock-cells property to usbphyc node to reflect this
capability.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Amelie Delaunay [Thu, 14 Jan 2021 13:15:23 +0000 (14:15 +0100)]
ARM: dts: stm32: remove usbphyc ports vdda1v1 & vdda1v8 on stm32mp15 boards
vdda1v1 and vdda1v8 supplies are required by USB PLL, not by the PHYs.
Remove them from usbphyc child phy nodes now that they are managed in
usbphyc parent node at SoC level.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Amelie Delaunay [Thu, 14 Jan 2021 13:15:22 +0000 (14:15 +0100)]
ARM: dts: stm32: add usbphyc vdda1v1 and vdda1v8 supplies on stm32mp151
vdda1v1 and vdda1v8 supplies are required by USB PLL. Add them in usbphyc
node.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Jagan Teki [Wed, 23 Dec 2020 11:07:57 +0000 (16:37 +0530)]
ARM: dts: stm32: Add STM32MP1 I2C6 SDA/SCL pinmux
Add SDA/SCL pinmux lines for I2C6 on STM32MP1.
This support adds both in default and sleep states.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Geert Uytterhoeven [Thu, 28 Jan 2021 11:01:36 +0000 (12:01 +0100)]
arm64: dts: renesas: beacon: Fix EEPROM compatible value
"make dtbs_check" fails with:
arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dt.yaml: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
'microchip,at24c64' does not match '^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$'
Fix this by dropping the bogus "at" prefix.
Fixes:
a1d8a344f1ca0709 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210128110136.2293490-1-geert+renesas@glider.be
Florian Fainelli [Fri, 29 Jan 2021 04:11:44 +0000 (20:11 -0800)]
Merge tag 'tags/bcm2835-dt-next-2021-01-28' into devicetree/next
Maxime enables CEC support on both RPi4 HDMI ports
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enric Balletbo i Serra [Wed, 13 Jan 2021 21:57:23 +0000 (22:57 +0100)]
arm64: dts: mt8183: Add missing power-domain for pwm0 node
The MT8183 display PWM device will not work until the associated
power-domain is enabled. Add the power-domain reference to the node
allows the display PWM driver to operate and the backlight turn on.
Fixes:
f15722c0fef0 ("arm64: dts: mt8183: Add pwm and backlight node")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210113215723.71966-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Jon Hunter [Thu, 28 Jan 2021 12:08:51 +0000 (12:08 +0000)]
arm64: tegra: Add support for Jetson Xavier NX with eMMC
Add support for the variant of the Jetson Xavier NX Developer Kit that
has a system-on-module which includes an eMMC.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Thu, 28 Jan 2021 12:08:50 +0000 (12:08 +0000)]
arm64: tegra: Prepare for supporting the Jetson Xavier NX with eMMC
There are two versions of the Jetson Xavier NX system-on-module; one
with a micro SD-card slot and one with an eMMC. Currently, only the
system-on-module with the micro SD-card slot is supported. Before adding
support for the eMMC variant, move the common device-tree parts of the
existing Jetson Xavier NX system-on-module board (p3668-0000) and
reference carrier board (p3509-0000) into include files that can be used
by both Jetson Xavier NX variants.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Yongqiang Niu [Thu, 28 Jan 2021 11:23:08 +0000 (19:23 +0800)]
arm64: dts: mt8183: refine gamma compatible name
mt8183 gamma is different with mt8173
remove mt8173 compatible name for mt8183 gamma
Fixes:
91f9c963ce79 ("arm64: dts: mt8183: Add display nodes for MT8183")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210128112314.1304160-3-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Yongqiang Niu [Thu, 28 Jan 2021 11:23:07 +0000 (19:23 +0800)]
arm64: dts: mt8183: rename rdma fifo size
property name must include only lowercase and '-'
Fixes:
91f9c963ce79 ("arm64: dts: mt8183: Add display nodes for MT8183")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210128112314.1304160-2-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Nishanth Menon [Wed, 20 Jan 2021 19:51:45 +0000 (13:51 -0600)]
arm64: dts: ti: k3*: Fixup PMU compatibility to be CPU specific
We can use CPU specific pmu configuration to expose the appropriate
CPU specific events rather than just the basic generic pmuv3 perf
events.
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210120195145.32259-1-nm@ti.com
Maxime Ripard [Mon, 11 Jan 2021 14:23:09 +0000 (15:23 +0100)]
ARM: dts: bcm2711: Add the CEC interrupt controller
The CEC and hotplug interrupts go through an interrupt controller shared
between the two HDMI controllers.
Let's add that interrupt controller and the interrupts for both HDMI
controllers
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210111142309.193441-16-maxime@cerno.tech
Scott Branden [Wed, 20 Jan 2021 18:51:40 +0000 (10:51 -0800)]
arm64: dts: broadcom: Remove SATA from Stingray
Remove SATA from Stingray as it is unsupported.
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rafał Miłecki [Wed, 13 Jan 2021 11:15:47 +0000 (12:15 +0100)]
arm64: dts: broadcom: bcm4908: describe PMB block
PMB (Power Management Bus) controls powering connected devices (e.g.
PCIe, USB, SATA). In BCM4908 it's a part of the PROCMON block.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rafał Miłecki [Wed, 13 Jan 2021 11:14:06 +0000 (12:14 +0100)]
arm64: dts: broadcom: bcm4908: describe internal switch
BCM4908 has internal switch with 5 GPHYs. Ports 0 - 3 are always
connected to the internal PHYs. Remaining ports depend on device setup.
Asus GT-AC5300 has an extra switch with its PHYs accessible using the
internal MDIO.
CPU port and Ethernet interface remain to be documented.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:39 +0000 (13:17 -0800)]
arm64: tegra: Enable QSPI on Jetson Xavier NX
This patch enables QSPI on Jetson Xavier NX.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:38 +0000 (13:17 -0800)]
arm64: tegra: Add QSPI nodes on Tegra194
Tegra194 has 2 QSPI controllers.
This patch adds DT node for these 2 QSPI controllers.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:37 +0000 (13:17 -0800)]
arm64: tegra: Enable QSPI on Jetson Nano
This patch enables QSPI on Jetson Nano.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Tue, 19 Jan 2021 09:28:16 +0000 (14:58 +0530)]
arm64: tegra: Audio graph sound card for Jetson Nano and TX1
Enable support for audio-graph based sound card on Jetson-Nano and
Jetson-TX1. Depending on the platform, required I/O interfaces are
enabled.
* Jetson-Nano: Enable I2S3, I2S4, DMIC1 and DMIC2.
* Jetson-TX1: Enable all I2S and DMIC interfaces.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Tue, 19 Jan 2021 09:28:15 +0000 (14:58 +0530)]
arm64: tegra: Audio graph header for Tegra210
Expose a header which describes DT bindings required to use audio-graph
based sound card. All Tegra210 based platforms can include this header
and add platform specific information. Currently, from SoC point of view,
all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 25 Jan 2021 15:32:56 +0000 (16:32 +0100)]
arm64: tegra: Order nodes alphabetically on Tegra210
Device tree nodes are ordered by unit-address and alphabetically by name
if a node doesn't have a unit-address. The thermal sensor and timer
nodes were not sorted in the correct order, so do that now.
Signed-off-by: Thierry Reding <treding@nvidia.com>
JC Kuo [Tue, 19 Jan 2021 02:23:49 +0000 (10:23 +0800)]
arm64: tegra: Enable Jetson-Xavier J512 USB host
This commit enables USB host mode at J512 type-C port of Jetson-Xavier.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
JC Kuo [Wed, 20 Jan 2021 07:34:08 +0000 (15:34 +0800)]
arm64: tegra: Add XUSB pad controller's "nvidia,pmc" property on Tegra210
PMC driver provides USB sleepwalk registers access to XUSB PADCTL
driver. This commit adds a "nvidia,pmc" property which points to
PMC node to XUSB PADCTL device node.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Thu, 7 Jan 2021 05:06:10 +0000 (10:36 +0530)]
arm64: tegra: Add power-domain for Tegra210 HDA
HDA initialization is failing occasionally on Tegra210 and following
print is observed in the boot log. Because of this probe() fails and
no sound card is registered.
[16.800802] tegra-hda
70030000.hda: no codecs found!
Codecs request a state change and enumeration by the controller. In
failure cases this does not seem to happen as STATETS register reads 0.
The problem seems to be related to the HDA codec dependency on SOR
power domain. If it is gated during HDA probe then the failure is
observed. Building Tegra HDA driver into kernel image avoids this
failure but does not completely address the dependency part. Fix this
problem by adding 'power-domains' DT property for Tegra210 HDA. Note
that Tegra186 and Tegra194 HDA do this already.
Fixes:
742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")
Depends-on:
96d1f078ff0 ("arm64: tegra: Add SOR power-domain for Tegra210")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Tue, 26 Jan 2021 23:11:35 +0000 (00:11 +0100)]
Merge branch 'for-5.12/dt-bindings' into for-5.12/arm64/dt
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:31 +0000 (13:17 -0800)]
dt-bindings: clock: tegra: Add clock ID TEGRA210_CLK_QSPI_PM
Tegra210 QSPI clock output has divider DIV2_SEL which will be enabled
when using DDR interface mode.
This patch adds clock ID for this to dt-binding.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Arnd Bergmann [Tue, 26 Jan 2021 22:13:06 +0000 (23:13 +0100)]
Merge tag 'samsung-dt64-5.12' of git://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.12
Correct Samsung PMIC and S3FWRN5 NFC interrupts trigger levels on
TM2/TM2E and Espresso boards.
* tag 'samsung-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: correct S3FWRN5 NFC interrupt trigger level on TM2
arm64: dts: exynos: correct PMIC interrupt trigger level on Espresso
arm64: dts: exynos: correct PMIC interrupt trigger level on TM2
Link: https://lore.kernel.org/r/20210125191240.11278-4-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Alexander Shiyan [Mon, 25 Jan 2021 10:50:11 +0000 (13:50 +0300)]
ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited board
This patch adds basic support for MYIR Tech MYC-AM335X CPU Module:
- Up to 1GHz TI AM335X Series ARM Cortex-A8 Processors
- Up to 512MB DDR3 SDRAM
- Up to 512MB Nand Flash
and MYD-AM335X Development Board:
- MYC-AM335X CPU Module as Controller Board
- Serial ports, 4 x USB Host, OTG, 2 x Gigabit Ethernet, CAN, RS485,
TF, Audio
- Supports HDMI and LCD Display
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
projects / platform / kernel / linux-starfive.git / log