Peter Hutterer [Thu, 26 Jul 2018 00:25:52 +0000 (10:25 +1000)]
test: release a few leaking udev devices
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 01:39:47 +0000 (11:39 +1000)]
doc: fix erroneous </dt>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 23:51:54 +0000 (09:51 +1000)]
test: supress another bash warning
Failing the leftover-rules check in the valgrind stage because
==1491== Invalid read of size 16
==1491== at 0x5320AE8: __wcsnlen_sse4_1 (in /usr/lib64/libc-2.27.so)
==1491== by 0x5310AD1: wcsrtombs (in /usr/lib64/libc-2.27.so)
==1491== by 0x1AA403: ??? (in /usr/bin/bash)
==1491== by 0x1AB3E3: glob_filename (in /usr/bin/bash)
==1491== by 0x179FF1: shell_glob_filename (in /usr/bin/bash)
==1491== by 0x1752CD: ??? (in /usr/bin/bash)
==1491== by 0x14C05F: ??? (in /usr/bin/bash)
==1491== by 0x14E2E3: execute_command_internal (in /usr/bin/bash)
==1491== by 0x14FBC5: execute_command (in /usr/bin/bash)
==1491== by 0x137598: reader_loop (in /usr/bin/bash)
==1491== by 0x135D38: main (in /usr/bin/bash)
==1491== Address 0x5651fd0 is 32 bytes before a block of size 128 in arena "client"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 11:09:12 +0000 (21:09 +1000)]
doc: fix the url where to file a new bug
Peter Hutterer [Wed, 25 Jul 2018 11:14:02 +0000 (21:14 +1000)]
doc: add a warning note that the reporting-bugs instructions do matter
And remove the paragraph below that states the same thing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 11:12:37 +0000 (21:12 +1000)]
doc: point to libinput --version
This will fail pre 1.8 but oh well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 04:45:00 +0000 (14:45 +1000)]
doc: replace a few <b> with markdown's **
At least where possible, doxygen doesn't parse lists starting with ** as
emphasized.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 04:43:20 +0000 (14:43 +1000)]
doc: replace html lists with markdown ones
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 03:09:48 +0000 (13:09 +1000)]
doc: reporting-bugs: use evemu-record as link text, not evemu
Because that's the tool we're using
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 03:01:23 +0000 (13:01 +1000)]
doc: single ` is enough for code highlighting
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 02:30:07 +0000 (12:30 +1000)]
doc: indent all @note continuation lines
This isn't required by doxygen but for a potential switch to RTD/sphinx
(see #95) it helps having this set up correctly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 05:03:09 +0000 (15:03 +1000)]
README: indent the links that belong to list items
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 20 Jul 2018 05:30:00 +0000 (15:30 +1000)]
doc: document the device quirks
Add some documentation for the most common quirks or at least the ones that
the user may eventually see or have to set. Drop the git commit hash into the
docs to make sure it's spelled out that the quirks are only valid for that
commit. Adding something with @include* requires the EXAMPLE_PATH to be set.
Doxygen doesn't parse markdown in @includedoc so we have to insert the commit
as normal HTML tag.
Related to https://gitlab.freedesktop.org/libinput/libinput/issues/87
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 03:15:42 +0000 (13:15 +1000)]
doc: fix ref to device-quirks
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:56:13 +0000 (11:56 +1000)]
doc: replace <a href> links with the doxygen markdown equivalent
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:55:00 +0000 (11:55 +1000)]
doc: replace <pre> with @verbatim
Be more consistent here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:44:19 +0000 (11:44 +1000)]
doc: add a section name to seats-overview
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 23 Jul 2018 11:21:31 +0000 (21:21 +1000)]
Gitlab CI: properly define empty dependencies for the wayland-web hook
This needs to be an empty array, see the "artifacts:paths" documentation for
an example
https://docs.gitlab.com/ee/ci/yaml/#when-a-dependent-job-will-fail
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Greg V [Mon, 23 Jul 2018 10:44:41 +0000 (13:44 +0300)]
Update FreeBSD package cache in CI
Should fix #93
Peter Hutterer [Mon, 23 Jul 2018 03:59:39 +0000 (13:59 +1000)]
test: add --gen-suppressions=all to the valgrind run
Because if we have a heisenbug that can't be reproduced on other machines,
having the suppression output in the log can save a lot of time.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Jeremy [Sun, 22 Jul 2018 21:16:36 +0000 (23:16 +0200)]
Improve HP Chromebook 14 pressure ranges
Peter Hutterer [Thu, 19 Jul 2018 22:37:47 +0000 (08:37 +1000)]
Merge branch 'master' of gitlab.freedesktop.org:libinput/libinput
Greg V [Wed, 18 Jul 2018 18:37:25 +0000 (21:37 +0300)]
Add versionsort test
And make local versionsort testable even when the native one is present.
Peter Hutterer [Thu, 19 Jul 2018 05:34:25 +0000 (15:34 +1000)]
tools: fix touch frame checks in the YAML verifier script
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 04:52:44 +0000 (14:52 +1000)]
touchpad: don't NONE or HOVERING touches towards the touch
To trigger this, we'd need 1, 2, 3 fingers down, release fingers 1 and 2 but
keep 3 down. Then put finger 1 down again. Touches 1 and 3 are alive now,
touch 2 is in state NONE.
During the thumb detection we took the first touch not in BEGIN and assigned
it to "first" - this would now be the second touch in state NONE.
Real effect is relatively minimal since we only use the coordinates here.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/89
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 04:10:32 +0000 (14:10 +1000)]
tools: always set the log handler for debug-events and debug-gui
This way errors are highlighted in red even without --verbose
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:39:35 +0000 (11:39 +1000)]
doc: add a section to the FAQs "is libinput required for Wayland"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:20:54 +0000 (11:20 +1000)]
doc: move the "General" section to the "Developer" section
The info here is mostly developer-oriented, let's group this together.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:12:27 +0000 (11:12 +1000)]
doc: fix references to a trackpoint range in the FAQs
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:11:58 +0000 (11:11 +1000)]
README: add a user documentation section fairly high up
For those with a tldr attention span
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 19 Jul 2018 01:06:50 +0000 (11:06 +1000)]
doc: break up the "what is libinput" page with two sections
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Greg V [Mon, 16 Jul 2018 15:33:39 +0000 (18:33 +0300)]
Add FreeBSD (cross-compliation based) CI
Fixes #82
Greg V [Sun, 15 Jul 2018 21:41:05 +0000 (00:41 +0300)]
Autodetect and use libepoll-shim on FreeBSD
Peter Hutterer [Tue, 17 Jul 2018 00:51:35 +0000 (10:51 +1000)]
evdev: fix the trackpoint multiplier info message
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 17 Jul 2018 00:02:49 +0000 (10:02 +1000)]
tools: setenv the quirks dir when running from the build directory
Fixes #84
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 17 Jul 2018 00:12:16 +0000 (10:12 +1000)]
tools: change prototype of the builddir lookup function
Only one place really needs the return argument, so we might as well just pass
the memory to be returned in.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Greg V [Sun, 15 Jul 2018 21:05:33 +0000 (00:05 +0300)]
Add input.h for FreeBSD
Greg V [Tue, 10 Jul 2018 11:01:54 +0000 (14:01 +0300)]
test: ptrace compatibility with *BSD
Greg V [Tue, 10 Jul 2018 10:57:12 +0000 (13:57 +0300)]
test: use simple portable sendfile
There's no need for high performance in these little tests, so instead of
supporting various platform-specific sendfile() implementations, just use a local read-write function.
Greg V [Tue, 10 Jul 2018 10:47:54 +0000 (13:47 +0300)]
test: support disabling tty on FreeBSD
Instead of K_OFF, use K_RAW plus termios raw mode.
(Same approach as in the Weston patches)
Greg V [Tue, 10 Jul 2018 11:00:11 +0000 (14:00 +0300)]
Use getprogname() when program_invocation_short_name is not defined
Greg V [Tue, 10 Jul 2018 10:56:18 +0000 (13:56 +0300)]
Fix include portablity (xlocale, stdlib)
Greg V [Tue, 10 Jul 2018 10:49:26 +0000 (13:49 +0300)]
Import versionsort implementation from musl for systems without versionsort
versionsort is a GNU extension, not available on *BSD systems.
Peter Hutterer [Fri, 13 Jul 2018 05:17:01 +0000 (15:17 +1000)]
fallback: remove some if 0 code
Looks like a development leftover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:26:24 +0000 (15:26 +1000)]
evdev: whitespace fix
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:03:39 +0000 (15:03 +1000)]
test: remove unsupported events from the invalid-range touchscreen test device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Greg V [Sun, 15 Jul 2018 20:50:33 +0000 (23:50 +0300)]
test: remove unused values.h include
Peter Hutterer [Fri, 13 Jul 2018 02:57:02 +0000 (12:57 +1000)]
Rename data/ to quirks/
A better, less ambiguous name than just "datadir"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 9 Jul 2018 03:51:39 +0000 (13:51 +1000)]
data: add HP Chromebook 14 pressure ranges
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/51
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 01:08:56 +0000 (11:08 +1000)]
tap: log a tap bug for release on MULTITAP_PALM
If we get here, the finger may only triger a PALM_UP but not a RELEASE event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 00:55:44 +0000 (10:55 +1000)]
tap: remove unnecessary TAP_STATE_DEAD assignment
All palm touches are set to DEAD anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 12 Jul 2018 06:48:49 +0000 (16:48 +1000)]
Merge branch 'wip/trackpoint-acceleration'
Peter Hutterer [Wed, 11 Jul 2018 23:07:55 +0000 (09:07 +1000)]
Gitlab CI: use a space in the meson builddir
Ideally this should catch any errors caused by reliance on unspaced
directories.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 6 Jul 2018 00:47:18 +0000 (10:47 +1000)]
doc: move the meson.build in as subdir()
Doing so means we can ditch the specific input list for doxygen and just copy
all files over into our builddir/doc/ subdir, then use that subdirectory as
input data.
This relies on meson putting a subdir() into a subdirectory in the build
directory. This isn't technically guaranteed but I also suspect that if meson
ever changes that, lots of other projects will break. Even in that case we
should build just fine since we now filter for *.h and *.dox and don't copy
any other doxygen-commented files into the builddir anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Jul 2018 22:42:53 +0000 (08:42 +1000)]
test: tidy up the symbols leak test
This hasn't been a real .in file since the autotools removal, so rename it to
reflect that. And since we can call it with arguments from meson, let's do so
in the most sensible manner - passing the full paths in as required rather
than relying on a directory layout within the script.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Jul 2018 03:08:51 +0000 (13:08 +1000)]
meson.build: move the directory path generation to a single section
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Jul 2018 06:34:57 +0000 (16:34 +1000)]
data: add the dell trackpoint multipliers
From systemd's hwdb/70-pointingstick.hwdb
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Jul 2018 06:34:22 +0000 (16:34 +1000)]
quirks: append "Touchpad" to the various dell touchpad quirks
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Jul 2018 05:04:25 +0000 (15:04 +1000)]
quirks: remove the leftovers of the trackpoint range attribute
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 11 Jul 2018 05:01:18 +0000 (15:01 +1000)]
quirks: remove the trackpoint range quirks entries
The only trackpoint where I have a rough idea what we need is the ALPS v8 one.
All other ones we'll have to re-do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 9 Jul 2018 06:04:50 +0000 (16:04 +1000)]
filter: add a trackpoint multiplier factor
Measuring the trackpoint range has not shown to be sufficient or precise
enough to be used as an ingredient for trackpoint acceleration. So let's just
switch back to a generic multiplier that we can apply to the input deltas do
undo any device-specific lack of scaling.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 9 Jul 2018 06:00:45 +0000 (16:00 +1000)]
quirks: add quirks_get_double()
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 29 Jun 2018 05:09:47 +0000 (15:09 +1000)]
tools: make-ptraccel-graphs: drop an unnecessary outfile
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 05:54:55 +0000 (15:54 +1000)]
tools: drop the special handling for trackpoint accel, not needed anymore
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 29 Jun 2018 05:15:20 +0000 (15:15 +1000)]
tools: reduce the trackpoint gnuplot range to 0..1 units/ms
Anything above 1 unit/ms is high pressure. Though that depends on the
trackpoint range, so...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 05:54:04 +0000 (15:54 +1000)]
tools: fix units for trackpoint accel graph
We use speed now and trackpoints are in units/ms
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 05:53:23 +0000 (15:53 +1000)]
filter: make the trackpoint accel profile func the same prototype as the others
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 5 Jun 2018 04:54:50 +0000 (14:54 +1000)]
filter: replace the trackpoint accel with a velocity-based one
This gets rid of the trackpoint range propery that we've been parsing until
now and instead just opts for a basic curve with some deceleration for low
pressure. The speed range is taken from the touchpad and should be wide enough
for most trackpoints that fall within the expected range.
Trackpoints like the new ALPS ones need to be configured through a hwdb (this
part is currently missing).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 10 Jul 2018 08:00:07 +0000 (18:00 +1000)]
doc: add a subsection on how to use libinput record --autorestart
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 10 Jul 2018 07:45:58 +0000 (17:45 +1000)]
doc: libinput-measure is a section, not a subsection
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 04:24:54 +0000 (14:24 +1000)]
tools: don't add the debug behavior for release builds
When the meson build type is something other than the debug types, we don't
need the special behavior where we adjust executable paths and data dir
lookup for tools run directly from the builddir.
This avoids leaking the build dir into the final executables.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 04:01:25 +0000 (14:01 +1000)]
tools: fake-build the other tools the same way as measure touchpad-tap
Doesn't actually do anything but this way they end up in the builddir and can
be picked up by ./builddir/libinput measure fuzz, etc.
And rename the source files to .py to signal that they are not supposed to be
directly executed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 03:44:18 +0000 (13:44 +1000)]
tools: rely on the libinput and quirks tool to pick the right directories
Don't use a custom hack here, just make sure the tool ends up in the builddir
so it's picked up by the libinput main tool.
This means the PATH isn't set up correctly when called directly
(./builddir/libinput-measure-touchpad-pressure) but the workaround is to
always use the libinput tool - just as we expect from users.
To make it more obvious that we're not supposed to run this directly, rename
the source file to .py
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 03:36:52 +0000 (13:36 +1000)]
tools: quirks: if we're executing from the builddir, use the git datadir
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 03:26:51 +0000 (13:26 +1000)]
tools: if the execdir is the builddir, add it to the path
When running libinput tools from the builddir, look up the subtools in the
builddir as well. Otherwise, add the install prefix to the list of lookup
locations.
This ensures that a) we're running builddir stuff against builddir stuff, but
also b) that we're not running builddir stuff against installed stuff because
that may give us false positives.
The test was squashed in from a separate patch and was
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 5 Jul 2018 02:17:26 +0000 (12:17 +1000)]
doc: drop the git version into the documentation
The libinput/doc/latest is now built automatically from git, so it's good to
have a reference to show which commit it was being built from. Add a section
to the readme with git commit information that is replaced by meson.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 5 Jul 2018 03:34:22 +0000 (13:34 +1000)]
Switch to using files() for the doxygen input sources
Using files() over a list of hand-constructed paths is the recommended way.
But unfortunately doxygen needs its input files as a string list, so we still
have to build that list anyway. Still, this way we don't need to hardcode
every file with the source root, we just assemble it as we go.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 6 Jul 2018 00:12:32 +0000 (10:12 +1000)]
GitLab CI: only rebuild the website when pushing to libinput proper
We don't want to try build when someone pushes to <username>/libinput
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 5 Jul 2018 04:13:33 +0000 (14:13 +1000)]
Gitlab CI: trigger the wayland web rebuild on pushes to master
This requires that WAYLAND_WEB_TOKEN is set up in the libinput settings on
gitlab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 5 Jul 2018 23:35:53 +0000 (09:35 +1000)]
GitLab CI: move the scan-build job up in the file
This is by far the slowest job, move it up so it gets started earlier and we
have more parallelization going on.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 5 Jul 2018 03:55:21 +0000 (13:55 +1000)]
test: misc: up the time limit on the ratelimit tests
I keep hitting this in the gitlab runner, 100ms is clearly not enough here for
slow containers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 5 Jul 2018 02:00:31 +0000 (12:00 +1000)]
doc: add the switches page to a "other devices" category
It felt a bit lost at the bottom of the "pages" list.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 3 Jul 2018 03:40:45 +0000 (13:40 +1000)]
doc: build doxygen output into "Documentation"
Slightly more obvious than just "html". Main motivation here is that we want
to provide the documentation as artifact from GitLab's CI, so having it unzip
to something slightly more meaningful makes sense.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 5 Jul 2018 00:28:56 +0000 (10:28 +1000)]
GitLab CI: rename MESON_PARAMS to MESON_ARGS
More correct, and we use NINJA_ARGS too
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 4 Jul 2018 04:38:33 +0000 (14:38 +1000)]
Gitlab CI: run the tests through valgrind on the f28 box
We don't run it on all machines, valgrind fails right now on arch because of a
memleak in bash itself. To avoid having CI failures that aren't our fault,
only run on F28 because that's the one I'm tracking.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 3 Jul 2018 06:03:51 +0000 (16:03 +1000)]
GitLab CI: always run ninja test unless otherwise specified
Now that the test suite has been cleaned up to be useful even when we can't
run the main runner, let's always run ninja test. Except in the targets where
we want something different.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 26 Jun 2018 03:15:13 +0000 (13:15 +1000)]
tools: rename list-quirks to the more generic "quirks list"
Enables us to easily add more tools where needed and it is
more consistent with the existing tools.
The commands are now:
libinput quirks list
libinput quirks validate
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/66
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 3 Jul 2018 03:06:13 +0000 (13:06 +1000)]
GitLab CI: don't use spaces in artifact names
Apparently that doesn't work anymore
Related to https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/41
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 29 Jun 2018 03:43:15 +0000 (13:43 +1000)]
fallback: cancel the debounce timers during device remove, not destroy
destroy isn't called until the last libinput_device_unref(), so we may trigger
a debounce timer after the device was removed. The same fix is neded for the
touchpad interface.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/72
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hans de Goede [Fri, 22 Jun 2018 16:40:27 +0000 (18:40 +0200)]
system-quirks: Add AttrTrackpointRange for Lenovo X270
The trackpoint on the Lenovo X270 sends delta events with a value
of up to 40.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 11:13:30 +0000 (21:13 +1000)]
gitlab CI: build a release with -Werror
Any compiler warnings in the default build are likely caught by developers
anyway. Let's build one with -Werror and the release buildtype to catch
anything triggered by optimization or somesuch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 11:03:50 +0000 (21:03 +1000)]
doc: fix typo in pointer acceleration docs
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/69
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 27 Jun 2018 04:10:57 +0000 (14:10 +1000)]
tools: add record/replay to --help output
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 22 Jun 2018 06:39:01 +0000 (16:39 +1000)]
tools: libinput-record: print the list of quirks
Now that all device quirks are in the quirks subsystem we have to print those
instead of just the udev devices.
Since libinput-record is there to record system devices, the system-installed
quirk list is used (without any commandline overrides right now). This is
useful to capture misconfigurations or missing quirks on the host system.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/58
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 22 Jun 2018 06:37:16 +0000 (16:37 +1000)]
tools: move printing device quirks to the shared tools lib
This way we can re-use this from libinput-record instead of having to
duplicate all this. Since the two tools use different printfs, just make the
actual printing a simple callback.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jun 2018 06:06:34 +0000 (16:06 +1000)]
test: parse arguments before any other stuff
If the args are bad, we don't need to check for root and whatnot.
Only exception here is the debugger check because it changes defaults that we
may want to override with commandline arguments later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 25 Jun 2018 04:50:22 +0000 (14:50 +1000)]
touchpad: don't disable tapping on MT_TOOL_PALM
The tapping code can handle palm states now, so there is no need to disable
tapping altogether when a tool-based palm is detected.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/65
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 21 Jun 2018 04:38:55 +0000 (14:38 +1000)]
tools: fake-build the measure touch-pressure/size sources
This way we can make them execute the list-quirks from the builddir. And it
makes it easier to run these tools from the git directory on machines where we
have libinput without the quirks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 21 Jun 2018 07:05:30 +0000 (17:05 +1000)]
test: add a libinput-test runner for 'deviceless' tests
These are tests that don't need *any* uinput devices at all. Mark them
accordingly and create a new binary that only runs those tests. This way we
can run some of the test suite even in containers where we're restricted.
Better have 10% tested than none, I guess.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 22 Jun 2018 06:57:51 +0000 (16:57 +1000)]
test: switch the global device list to a struct list
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>