review.tizen.org Git - platform/kernel/linux-starfive.git/log

gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()

gpio_set_bias() no longer uses the passed gpio_chip pointer parameter.
Remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200325100439.14000-3-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpiolib: Pass gpio_desc to gpio_set_config()

All callers of gpio_set_config() have to convert a gpio_desc to a
gpio_chip and offset. Avoid these duplicated conversion steps by
letting gpio_set_config() take a gpio_desc pointer directly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200325100439.14000-2-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpiolib: Introduce gpiod_set_config()

The GPIO Aggregator will need a method to forward a .set_config() call
to its parent gpiochip. This requires obtaining the gpio_chip and
offset for a given gpio_desc. While gpiod_to_chip() is public,
gpio_chip_hwgpio() is not, so there is currently no method to obtain the
needed GPIO offset parameter.

Hence introduce a public gpiod_set_config() helper, which invokes the
.set_config() callback through a gpio_desc pointer, like is done for
most other gpio_chip callbacks.

Rewrite the existing gpiod_set_debounce() helper as a wrapper around
gpiod_set_config(), to avoid duplication.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200324135653.6676-5-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'v5.6-rc7' into devel

Linux 5.6-rc7

tools: gpio: Fix out-of-tree build regression

Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:

No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop.

Fix that.

Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: gpiolib: fix a doc warning

Use a different markup for the ERR_PTR, as %FOO doesn't work
if there are parenthesis. So, use, instead:

``ERR_PTR(-EINVAL)``

This fixes the following warning:

./drivers/gpio/gpiolib.c:139: WARNING: Inline literal start-string without end-string.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/51197e3568f073e22c280f0584bfa20b44436708.1584456635.git.mchehab+huawei@kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1

The GG.0 and GG.1 GPIOs serve as CLKREQ and RST pins, respectively, for
PCIe controller 5 on Tegra194. When this controller is configured in
endpoint mode, these pins need to be used as GPIOs by the PCIe endpoint
driver. Typically the mode programming of these pins (GPIO vs. SFIO) is
performed by early boot firmware to ensure that the configuration is
consistent.

However, the GG.0 and GG.1 pins are part of a special power partition
that is not enabled during early boot, and hence the early boot firmware
cannot program these pins to be GPIOs (they are SFIO by default). Adding
them as pin ranges for the pin controller allows the pin controller to
be involved when these pins are requested as GPIOs and allows the proper
programming to take place.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200319122737.3063291-4-thierry.reding@gmail.com
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: tegra186: Add support for pin ranges

Add support for Tegra SoC generations to specify a list of pin ranges
that map GPIOs to ranges of pins in the pin controller.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200319122737.3063291-3-thierry.reding@gmail.com
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: Support GPIO controllers without pin-ranges

Wake gpiochip_generic_request() call into the pinctrl helpers only if a
GPIO controller had any pin-ranges assigned to it. This allows a driver
to unconditionally use this helper if it supports multiple devices of
which only a subset have pin-ranges assigned to them.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200319122737.3063291-2-thierry.reding@gmail.com
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro

impd1_probe() fills in the GPIO lookup table by manually populating an
array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper
macro instead, to relax a dependency on the gpiod_lookup structure's
member names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20200324135653.6676-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: brcmstb: support gpio-line-names property

The default handling of the gpio-line-names property by the
gpiolib-of implementation does not work with the multiple
gpiochip banks per device structure used by the gpio-brcmstb
driver.

This commit adds driver level support for the device tree
property so that GPIO lines can be assigned friendly names.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Link: https://lore.kernel.org/r/1583780521-45702-1-git-send-email-opendmb@gmail.com
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'gpio-updates-for-v5.7-part4' of git://git./linux/kernel/git/brgl/linux into devel

gpio updates for v5.7 part 4

- improve comments in the uapi header
- fix documentation issues
- add a warning to gpio-pl061 when the IRQ line is not configured
- allow building gpio-mxc and gpio-mxs with COMPILE_TEST enabled
- don't print an error message when an optional IRQ is missing in gpio-mvebu
- fix a potential segfault in gpio-hammer
- fix a couple typos and coding style issues in gpio tools
- provide a new flag in gpio-mmio and use it in mt7621 to fix an issue with
the controller ignoring value setting when a GPIO is in input mode
- slightly refactor gpio_name_to_desc()

tools: gpio: Fix typo in gpio-utils

Replace COMSUMER with proper CONSUMER

Signed-off-by: Mykyta Poturai <mykyta.poturai@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

tools: gpio-hammer: Apply scripts/Lindent and retain good changes

"retain good changes" means that I left the help string split up instead
of having this weird thing where it tries to merge together the last three
lines and it looks **really** bad

Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpiolib: gpio_name_to_desc: factor out !name check

Since name == NULL can't ever match, move the check out of
IRQ-disabled region.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

tools: gpio-hammer: fix spelling mistake: "occurences" -> "occurrences"

There is a spelling mistake in an error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: mt7621: add BGPIOF_NO_SET_ON_INPUT flag

DSET/DCLR registers only works on output pins. Add corresponding
BGPIOF_NO_SET_ON_INPUT flag to bgpio_init call to fix direction_out
behavior.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: mmio: introduce BGPIOF_NO_SET_ON_INPUT

Some gpio controllers ignores pin value writing when that pin is
configured as input mode. As a result, bgpio_dir_out should set
pin to output before configuring pin values or gpio pin values
can't be set up properly.
Introduce two variants of bgpio_dir_out: bgpio_dir_out_val_first
and bgpio_dir_out_dir_first, and assign direction_output according
to a new flag: BGPIOF_NO_SET_ON_INPUT.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

tools: gpio-hammer: Avoid potential overflow in main

If '-o' was used more than 64 times in a single invocation of gpio-hammer,
this could lead to an overflow of the 'lines' array. This commit fixes
this by avoiding the overflow and giving a proper diagnostic back to the
user

Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: mvebu: avoid error message for optional IRQ

platform_get_irq() will generate an error message if the requested irq
is not present

mvebu-gpio f1010140.gpio: IRQ index 3 not found

use platform_get_irq_optional() to avoid the error message being
generated.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: mxs: add COMPILE_TEST support for GPIO_MXS

Add COMPILE_TEST support to GPIO_MXS driver for better compile
testing coverage.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: mxc: Add COMPILE_TEST support for GPIO_MXC

Add COMPILE_TEST support to GPIO_MXC driver for better compile
testing coverage.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: pl061: Warn when IRQ line has not been configured

Existing (irq < 0) condition is always false because adev->irq has unsigned
type and contains 0 in case of failed irq_of_parse_and_map(). Up to now all
the mapping errors were silently ignored.

Seems that repairing this check would be backwards-incompatible and might
break the probe() for the implementations without IRQ support. Therefore
warn the user instead.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

docs: gpio: driver.rst: don't mark literal blocks twice

Two literal blocks there are marked with both "::" and

.. code-block:: c

This causes Sphinx (2.4.1) to do the wrong thing, causing
lots of warnings:

    Documentation/driver-api/gpio/driver.rst:425: WARNING: Unexpected indentation.
    Documentation/driver-api/gpio/driver.rst:423: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:427: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:433: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:446: WARNING: Unexpected indentation.
    Documentation/driver-api/gpio/driver.rst:440: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:440: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:447: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/driver-api/gpio/driver.rst:449: WARNING: Definition list ends without a blank line; unexpected unindent.
    Documentation/driver-api/gpio/driver.rst:462: WARNING: Unexpected indentation.
    Documentation/driver-api/gpio/driver.rst:460: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:462: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:465: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:471: WARNING: Inline emphasis start-string without end-string.
    Documentation/driver-api/gpio/driver.rst:478: WARNING: Inline emphasis start-string without end-string.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: uapi: Improve phrasing around arrays representing empty strings

Character arrays can be considered empty strings (if they are
immediately terminated), but they cannot be NULL.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Linux 5.6-rc7

Merge tag 'for-5.6-rc6-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"Two fixes.

  The first is a regression: when dropping some incompat bits the
  conditions were reversed. The other is a fix for rename whiteout
  potentially leaving stack memory linked to a list"

* tag 'for-5.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix removal of raid[56|1c34} incompat flags after removing block group
  btrfs: fix log context list corruption after rename whiteout error

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  x86/mm: split vmalloc_sync_all()
  mm, slub: prevent kmalloc_node crashes and memory leaks
  mm/mmu_notifier: silence PROVE_RCU_LIST warnings
  epoll: fix possible lost wakeup on epoll_ctl() path
  mm: do not allow MADV_PAGEOUT for CoW pages
  mm, memcg: throttle allocators based on ancestral memory.high
  mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
  page-flags: fix a crash at SetPageError(THP_SWAP)
  mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
  memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event

x86/mm: split vmalloc_sync_all()

Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path.  While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.

Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap().  But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.

To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:

* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()

Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized.  The only exception is the new call-site added in the
above mentioned commit.

Shile Zhang directed us to a report of an 80% regression in reaim
throughput.

Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES]
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, slub: prevent kmalloc_node crashes and memory leaks

Sachin reports [1] a crash in SLUB __slab_alloc():

  BUG: Kernel NULL pointer dereference on read at 0x000073b0
  Faulting instruction address: 0xc0000000003d55f4
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-20200218-autotest #1
  NIP:  c0000000003d55f4 LR: c0000000003d5b94 CTR: 0000000000000000
  REGS: c0000008b37836d0 TRAP: 0300   Not tainted  (5.6.0-rc2-next-20200218-autotest)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 24004844  XER: 00000000
  CFAR: c00000000000dec4 DAR: 00000000000073b0 DSISR: 40000000 IRQMASK: 1
  GPR00: c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500
  GPR04: 0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620
  GPR08: 00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000
  GPR12: 0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000
  GPR16: c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002
  GPR20: c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122
  GPR24: 0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8
  GPR28: c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180
  NIP ___slab_alloc+0x1f4/0x760
  LR __slab_alloc+0x34/0x60
  Call Trace:
    ___slab_alloc+0x334/0x760 (unreliable)
    __slab_alloc+0x34/0x60
    __kmalloc_node+0x110/0x490
    kvmalloc_node+0x58/0x110
    mem_cgroup_css_online+0x108/0x270
    online_css+0x48/0xd0
    cgroup_apply_control_enable+0x2ec/0x4d0
    cgroup_mkdir+0x228/0x5f0
    kernfs_iop_mkdir+0x90/0xf0
    vfs_mkdir+0x110/0x230
    do_mkdirat+0xb0/0x1a0
    system_call+0x5c/0x68

This is a PowerPC platform with following NUMA topology:

  available: 2 nodes (0-1)
  node 0 cpus:
  node 0 size: 0 MB
  node 0 free: 0 MB
  node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  node 1 size: 35247 MB
  node 1 free: 30907 MB
  node distances:
  node   0   1
    0:  10  40
    1:  40  10

  possible numa nodes: 0-31

This only happens with a mmotm patch "mm/memcontrol.c: allocate
shrinker_map on appropriate NUMA node" [2] which effectively calls
kmalloc_node for each possible node.  SLUB however only allocates
kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on
node_to_mem_node to return such valid node for other nodes since commit
a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating
on memoryless node").  This is however not true in this configuration
where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31,
thus it contains zeroes and get_partial() ends up accessing
non-allocated kmem_cache_node.

A related issue was reported by Bharata (originally by Ramachandran) [3]
where a similar PowerPC configuration, but with mainline kernel without
patch [2] ends up allocating large amounts of pages by kmalloc-1k
kmalloc-512.  This seems to have the same underlying issue with
node_to_mem_node() not behaving as expected, and might probably also
lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4].

This patch should fix both issues by not relying on node_to_mem_node()
anymore and instead simply falling back to NUMA_NO_NODE, when
kmalloc_node(node) is attempted for a node that's not online, or has no
usable memory.  The "usable memory" condition is also changed from
node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly
the condition that SLUB uses to allocate kmem_cache_node structures.
The check in get_partial() is removed completely, as the checks in
___slab_alloc() are now sufficient to prevent get_partial() being
reached with an invalid node.

[1] https://lore.kernel.org/linux-next/3381CD91-AB3D-4773-BA04-E7A072A63968@linux.vnet.ibm.com/
[2] https://lore.kernel.org/linux-mm/fff0e636-4c36-ed10-281c-8cdb0687c839@virtuozzo.com/
[3] https://lore.kernel.org/linux-mm/20200317092624.GB22538@in.ibm.com/
[4] https://lore.kernel.org/linux-mm/088b5996-faae-8a56-ef9c-5b567125ae54@suse.cz/

Fixes: a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200320115533.9604-1-vbabka@suse.cz
Debugged-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: silence PROVE_RCU_LIST warnings

It is safe to traverse mm->notifier_subscriptions->list either under
SRCU read lock or mm->notifier_subscriptions->lock using
hlist_for_each_entry_rcu().  Silence the PROVE_RCU_LIST false positives,
for example,

  WARNING: suspicious RCU usage
  -----------------------------
  mm/mmu_notifier.c:484 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 1
  3 locks held by libvirtd/802:
   #0: ffff9321e3f58148 (&mm->mmap_sem#2){++++}, at: do_mprotect_pkey+0xe1/0x3e0
   #1: ffffffff91ae6160 (mmu_notifier_invalidate_range_start){+.+.}, at: change_p4d_range+0x5fa/0x800
   #2: ffffffff91ae6e08 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x178/0x460

  stack backtrace:
  CPU: 7 PID: 802 Comm: libvirtd Tainted: G          I       5.6.0-rc6-next-20200317+ #2
  Hardware name: HP ProLiant BL460c Gen8, BIOS I31 11/02/2014
  Call Trace:
    dump_stack+0xa4/0xfe
    lockdep_rcu_suspicious+0xeb/0xf5
    __mmu_notifier_invalidate_range_start+0x3ff/0x460
    change_p4d_range+0x746/0x800
    change_protection+0x1df/0x300
    mprotect_fixup+0x245/0x3e0
    do_mprotect_pkey+0x23b/0x3e0
    __x64_sys_mprotect+0x51/0x70
    do_syscall_64+0x91/0xae8
    entry_SYSCALL_64_after_hwframe+0x49/0xb3

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Link: http://lkml.kernel.org/r/20200317175640.2047-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: fix possible lost wakeup on epoll_ctl() path

This fixes possible lost wakeup introduced by commit a218cc491420.
Originally modifications to ep->wq were serialized by ep->wq.lock, but
in commit a218cc491420 ("epoll: use rwlock in order to reduce
ep_poll_callback() contention") a new rw lock was introduced in order to
relax fd event path, i.e. callers of ep_poll_callback() function.

After the change ep_modify and ep_insert (both are called on epoll_ctl()
path) were switched to ep->lock, but ep_poll (epoll_wait) was using
ep->wq.lock on wqueue list modification.

The bug doesn't lead to any wqueue list corruptions, because wake up
path and list modifications were serialized by ep->wq.lock internally,
but actual waitqueue_active() check prior wake_up() call can be
reordered with modifications of ep ready list, thus wake up can be lost.

And yes, can be healed by explicit smp_mb():

  list_add_tail(&epi->rdlink, &ep->rdllist);
  smp_mb();
  if (waitqueue_active(&ep->wq))
wake_up(&ep->wp);

But let's make it simple, thus current patch replaces ep->wq.lock with
the ep->lock for wqueue modifications, thus wake up path always observes
activeness of the wqueue correcty.

Fixes: a218cc491420 ("epoll: use rwlock in order to reduce ep_poll_callback() contention")
Reported-by: Max Neunhoeffer <max@arangodb.com>
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Max Neunhoeffer <max@arangodb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jes Sorensen <jes.sorensen@gmail.com>
Cc: <stable@vger.kernel.org> [5.1+]
Link: http://lkml.kernel.org/r/20200214170211.561524-1-rpenyaev@suse.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=205933
Bisected-by: Max Neunhoeffer <max@arangodb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do not allow MADV_PAGEOUT for CoW pages

Jann has brought up a very interesting point [1].  While shared pages
are excluded from MADV_PAGEOUT normally, CoW pages can be easily
reclaimed that way.  This can lead to all sorts of hard to debug
problems.  E.g.  performance problems outlined by Daniel [2].

There are runtime environments where there is a substantial memory
shared among security domains via CoW memory and a easy to reclaim way
of that memory, which MADV_{COLD,PAGEOUT} offers, can lead to either
performance degradation in for the parent process which might be more
privileged or even open side channel attacks.

The feasibility of the latter is not really clear to me TBH but there is
no real reason for exposure at this stage.  It seems there is no real
use case to depend on reclaiming CoW memory via madvise at this stage so
it is much easier to simply disallow it and this is what this patch
does.  Put it simply MADV_{PAGEOUT,COLD} can operate only on the
exclusively owned memory which is a straightforward semantic.

[1] http://lkml.kernel.org/r/CAG48ez0G3JkMq61gUmyQAaCq=_TwHbi1XKzWRooxZkv08PQKuw@mail.gmail.com
[2] http://lkml.kernel.org/r/CAKOZueua_v8jHCpmEtTB6f3i9e2YnmX4mqdYVWhV4E=Z-n+zRQ@mail.gmail.com

Fixes: 9c276cc65a58 ("mm: introduce MADV_COLD")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200312082248.GS23944@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: throttle allocators based on ancestral memory.high

Prior to this commit, we only directly check the affected cgroup's
memory.high against its usage. However, it's possible that we are being
reclaimed as a result of hitting an ancestor memory.high and should be
penalised based on that, instead.

This patch changes memory.high overage throttling to use the largest
overage in its ancestors when considering how many penalty jiffies to
charge. This makes sure that we penalise poorly behaving cgroups in the
same way regardless of at what level of the hierarchy memory.high was
breached.

Fixes: 0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high")
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [5.4.x+]
Link: http://lkml.kernel.org/r/8cd132f84bd7e16cdb8fde3378cdbf05ba00d387.1584036142.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: fix corruption on 64-bit divisor in memory.high throttling

Commit 0e4b01df8659 had a bunch of fixups to use the right division
method. However, it seems that after all that it still wasn't right --
div_u64 takes a 32-bit divisor.

The headroom is still large (2^32 pages), so on mundane systems you
won't hit this, but this should definitely be fixed.

Fixes: 0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high")
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org> [5.4.x+]
Link: http://lkml.kernel.org/r/80780887060514967d414b3cd91f9a316a16ab98.1584036142.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page-flags: fix a crash at SetPageError(THP_SWAP)

Commit bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped
out") supported writing THP to a swap device but forgot to upgrade an
older commit df8c94d13c7e ("page-flags: define behavior of FS/IO-related
flags on compound pages") which could trigger a crash during THP
swapping out with DEBUG_VM_PGFLAGS=y,

  kernel BUG at include/linux/page-flags.h:317!

  page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
  page:fffff3b2ec3a8000 refcount:512 mapcount:0 mapping:000000009eb0338c index:0x7f6e58200 head:fffff3b2ec3a8000 order:9 compound_mapcount:0 compound_pincount:0
  anon flags: 0x45fffe0000d8454(uptodate|lru|workingset|owner_priv_1|writeback|head|reclaim|swapbacked)

  end_swap_bio_write()
    SetPageError(page)
      VM_BUG_ON_PAGE(1 && PageCompound(page))

  <IRQ>
  bio_endio+0x297/0x560
  dec_pending+0x218/0x430 [dm_mod]
  clone_endio+0xe4/0x2c0 [dm_mod]
  bio_endio+0x297/0x560
  blk_update_request+0x201/0x920
  scsi_end_request+0x6b/0x4b0
  scsi_io_completion+0x509/0x7e0
  scsi_finish_command+0x1ed/0x2a0
  scsi_softirq_done+0x1c9/0x1d0
  __blk_mqnterrupt+0xf/0x20
  </IRQ>

Fix by checking PF_NO_TAIL in those places instead.

Fixes: bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310235846.1319-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case

In section_deactivate(), pfn_to_page() doesn't work any more after
ms->section_mem_map is resetting to NULL in SPARSEMEM|!VMEMMAP case.  It
causes a hot remove failure:

  kernel BUG at mm/page_alloc.c:4806!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 3 PID: 8 Comm: kworker/u16:0 Tainted: G        W         5.5.0-next-20200205+ #340
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  RIP: 0010:free_pages+0x85/0xa0
  Call Trace:
   __remove_pages+0x99/0xc0
   arch_remove_memory+0x23/0x4d
   try_remove_memory+0xc8/0x130
   __remove_memory+0xa/0x11
   acpi_memory_device_remove+0x72/0x100
   acpi_bus_trim+0x55/0x90
   acpi_device_hotplug+0x2eb/0x3d0
   acpi_hotplug_work_fn+0x1a/0x30
   process_one_work+0x1a7/0x370
   worker_thread+0x30/0x380
   kthread+0x112/0x130
   ret_from_fork+0x35/0x40

Let's move the ->section_mem_map resetting after
depopulate_section_memmap() to fix it.

[akpm@linux-foundation.org: remove unneeded initialization, per David]
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200307084229.28251-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event

An eventfd monitors multiple memory thresholds of the cgroup, closes them,
the kernel deletes all events related to this eventfd.  Before all events
are deleted, another eventfd monitors the memory threshold of this cgroup,
leading to a crash:

  BUG: kernel NULL pointer dereference, address: 0000000000000004
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 800000033058e067 P4D 800000033058e067 PUD 3355ce067 PMD 0
  Oops: 0002 [#1] SMP PTI
  CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3
  Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014
  Workqueue: events memcg_event_remove
  RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190
  RSP: 0018:ffffb47e01c4fe18 EFLAGS: 00010202
  RAX: 0000000000000001 RBX: ffff8bb223a8a000 RCX: 0000000000000001
  RDX: 0000000000000001 RSI: ffff8bb22fb83540 RDI: 0000000000000001
  RBP: ffffb47e01c4fe48 R08: 0000000000000000 R09: 0000000000000010
  R10: 000000000000000c R11: 071c71c71c71c71c R12: ffff8bb226aba880
  R13: ffff8bb223a8a480 R14: 0000000000000000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff8bb242680000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000004 CR3: 000000032c29c003 CR4: 00000000001606e0
  Call Trace:
    memcg_event_remove+0x32/0x90
    process_one_work+0x172/0x380
    worker_thread+0x49/0x3f0
    kthread+0xf8/0x130
    ret_from_fork+0x35/0x40
  CR2: 0000000000000004

We can reproduce this problem in the following ways:

1. We create a new cgroup subdirectory and a new eventfd, and then we
   monitor multiple memory thresholds of the cgroup through this eventfd.

2.  closing this eventfd, and __mem_cgroup_usage_unregister_event ()
   will be called multiple times to delete all events related to this
   eventfd.

The first time __mem_cgroup_usage_unregister_event() is called, the
kernel will clear all items related to this eventfd in thresholds->
primary.

Since there is currently only one eventfd, thresholds-> primary becomes
empty, so the kernel will set thresholds-> primary and hresholds-> spare
to NULL.  If at this time, the user creates a new eventfd and monitor
the memory threshold of this cgroup, kernel will re-initialize
thresholds-> primary.

Then when __mem_cgroup_usage_unregister_event () is called for the
second time, because thresholds-> primary is not empty, the system will
access thresholds-> spare, but thresholds-> spare is NULL, which will
trigger a crash.

In general, the longer it takes to delete all events related to this
eventfd, the easier it is to trigger this problem.

The solution is to check whether the thresholds associated with the
eventfd has been cleared when deleting the event.  If so, we do nothing.

[akpm@linux-foundation.org: fix comment, per Kirill]
Fixes: 907860ed381a ("cgroups: make cftype.unregister_event() void-returning")
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'block-5.6-20200320' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Just two NVMe fabrics fixes that should go into 5.6"

* tag 'block-5.6-20200320' of git://git.kernel.dk/linux-block:
nvmet-tcp: set MSG_MORE only if we actually have more to send
nvme-rdma: Avoid double freeing of async event data

Merge tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Two different fixes in here:

   - Fix for a potential NULL pointer deref for links with async or
     drain marked (Pavel)

   - Fix for not properly checking RLIMIT_NOFILE for async punted
     operations.

     This affects openat/openat2, which were added this cycle, and
     accept4. I did a full audit of other cases where we might check
     current->signal->rlim[] and found only RLIMIT_FSIZE for buffered
     writes and fallocate. That one is fixed and queued for 5.7 and
     marked stable"

* tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block:
  io_uring: make sure accept honor rlimit nofile
  io_uring: make sure openat/openat2 honor rlimit nofile
  io_uring: NULL-deref for IOSQE_{ASYNC,DRAIN}

Merge branch 'turbostat' of git://git./linux/kernel/git/lenb/linux

Pull turbostat updates from Len Brown:
"Update to turbostat v20.03.20.

  These patches unlock the full turbostat features for some new
  machines, plus a couple other minor tweaks"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: update version
  tools/power turbostat: Print cpuidle information
  tools/power turbostat: Fix 32-bit capabilities warning
  tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks
  tools/power turbostat: Support Elkhart Lake
  tools/power turbostat: Support Jasper Lake
  tools/power turbostat: Support Ice Lake server
  tools/power turbostat: Support Tiger Lake
  tools/power turbostat: Fix gcc build warnings
  tools/power turbostat: Support Cometlake

Merge tag 'powerpc-5.6-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Two fixes for bugs introduced this cycle:

   - fix a crash when shutting down a KVM PR guest (our original style
     of KVM which doesn't use hypervisor mode)

   - fix for the recently added 32-bit KASAN_VMALLOC support

  Thanks to: Christophe Leroy, Greg Kurz, Sean Christopherson"

* tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Fix kernel crash with PR KVM
  powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOC

tools/power turbostat: update version

A stitch in time saves nine.

Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Print cpuidle information

Print cpuidle driver and governor.

Originally-by: Antti Laakso <antti.laakso@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Merge branch 'nvme-5.6-rc6' of git://git.infradead.org/nvme into block-5.6

Pull NVMe fixes from Keith:

"Two late nvme fabrics fixes for 5.6: a double free with the rdma
transport, and a regression fix for tcp; please pull."

* 'nvme-5.6-rc6' of git://git.infradead.org/nvme:
nvmet-tcp: set MSG_MORE only if we actually have more to send
nvme-rdma: Avoid double freeing of async event data

btrfs: fix removal of raid[56|1c34} incompat flags after removing block group

We are incorrectly dropping the raid56 and raid1c34 incompat flags when
there are still raid56 and raid1c34 block groups, not when we do not any
of those anymore. The logic just got unintentionally broken after adding
the support for the raid1c34 modes.

Fix this by clear the flags only if we do not have block groups with the
respective profiles.

Fixes: 9c907446dce3 ("btrfs: drop incompat bit for raid1c34 after last block group is gone")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

nvmet-tcp: set MSG_MORE only if we actually have more to send

When we send PDU data, we want to optimize the tcp stack
operation if we have more data to send. So when we set MSG_MORE
when:
- We have more fragments coming in the batch, or
- We have a more data to send in this PDU
- We don't have a data digest trailer
- We optimize with the SUCCESS flag and omit the NVMe completion
(used if sq_head pointer update is disabled)

This addresses a regression in QD=1 with SUCCESS flag optimization
as we unconditionally set MSG_MORE when we didn't actually have
more data to send.

Fixes: 70583295388a ("nvmet-tcp: implement C2HData SUCCESS optimization")
Reported-by: Mark Wunderlich <mark.wunderlich@intel.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

- Fix panic() when it occurs during secondary CPU startup

- Fix "kpti=off" when KASLR is enabled

- Fix howler in compat syscall table for vDSO clock_getres() fallback

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: compat: Fix syscall number of compat_clock_getres
  arm64: kpti: Fix "kpti=off" when KASLR is enabled
  arm64: smp: fix crash_smp_send_stop() behaviour
  arm64: smp: fix smp_send_stop() behaviour

Merge tag 'char-misc-5.6-rc7' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small different driver fixes for 5.6-rc7:

   - binderfs fix, yet again

   - slimbus new device id added

   - hwtracing bugfixes for reported issues and a new device id

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  intel_th: pci: Add Elkhart Lake CPU support
  intel_th: Fix user-visible error codes
  intel_th: msu: Fix the unexpected state warning
  stm class: sys-t: Fix the use of time_after()
  slimbus: ngd: add v2.1.0 compatible
  binderfs: use refcount for binder control devices too

Merge tag 'staging-5.6-rc7' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
"Here are a number of small staging and IIO driver fixes for 5.6-rc7

  Nothing major here, just resolutions for some reported problems:
   - iio bugfixes for a number of different drivers
   - greybus loopback_test fixes
   - wfx driver fixes

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
  staging: greybus: loopback_test: fix potential path truncations
  staging: greybus: loopback_test: fix potential path truncation
  staging: greybus: loopback_test: fix poll-mask build breakage
  staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()
  staging: wfx: fix RCU usage in wfx_join_finalize()
  staging: wfx: make warning about pending frame less scary
  staging: wfx: fix lines ending with a comma instead of a semicolon
  staging: wfx: fix warning about freeing in-use mutex during device unregister
  staging/speakup: fix get_word non-space look-ahead
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

Merge tag 'usb-5.6-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt
  driver fix thrown in for good measure as well.

  These fixes are:
   - new device ids for usb-serial drivers
   - thunderbolt error code fix
   - xhci driver fixes
   - typec fixes
   - cdc-acm driver fixes
   - chipidea driver fix
   - more USB quirks added for devices that need them.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix rounding error in TIOCSSERIAL
  USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
  usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
  usb: chipidea: udc: fix sleeping function called from invalid context
  USB: serial: pl2303: add device-id for HP LD381
  USB: serial: option: add ME910G1 ECM composition 0x110b
  usb: host: xhci-plat: add a shutdown
  usb: typec: ucsi: displayport: Fix a potential race during registration
  usb: typec: ucsi: displayport: Fix NULL pointer dereference
  USB: Disable LPM on WD19's Realtek Hub
  usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  xhci: Do not open code __print_symbolic() in xhci trace events
  thunderbolt: Fix error code in tb_port_is_width_supported()

Merge tag 'tty-5.6-rc7' of git://git./linux/kernel/git/gregkh/tty

Pull tty fixes from Greg KH:
"Here are three small tty_io bugfixes for reported issues that Eric has
  resolved for 5.6-rc7

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix compat TIOCGSERIAL checking wrong function ptr
  tty: fix compat TIOCGSERIAL leaking uninitialized memory
  tty: drop outdated comments about release_tty() locking

Merge tag 'sound-5.6-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A few fixes covering the issues reported by syzkaller, a couple of
  fixes for the MIDI decoding bug, and a few usual HD-audio quirks.

  Some of them are about ALSA core stuff, but they are small fixes just
  for corner cases, and nothing thrilling"

* tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
  ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
  ALSA: seq: oss: Fix running status after receiving sysex
  ALSA: seq: virmidi: Fix running status after receiving sysex
  ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
  ALSA: hda/realtek: Fix pop noise on ALC225
  ALSA: line6: Fix endless MIDI read loop
  ALSA: pcm: oss: Avoid plugin buffer overflow

Merge tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Hope you are well hiding out above the garage. A few amdgpu changes
  but nothing too major. I've had a wisdom tooth out this week so
  haven't been to on top of things, but all seems good.

  core:
   - fix lease warning

  i915:
   - Track active elements during dequeue
   - Fix failure to handle all MCR ranges
   - Revert unnecessary workaround

  amdgpu:
   - Pageflip fix
   - VCN clockgating fixes
   - GPR debugfs fix for umr
   - GPU reset fix
   - eDP fix for MBP
   - DCN2.x fix

  dw-hdmi:
   - fix AVI frame colorimetry

  komeda:
   - fix compiler warning

  bochs:
   - downgrade a binding failure to a warning"

* tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix pageflip event race condition for DCN.
  drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check
  drm/amdgpu: fix typo for vcn2/jpeg2 idle check
  drm/amdgpu: fix typo for vcn1 idle check
  drm/lease: fix WARNING in idr_destroy
  drm/i915: Handle all MCR ranges
  Revert "drm/i915/tgl: Add extra hdc flush workaround"
  drm/i915/execlists: Track active elements during dequeue
  drm/bochs: downgrade pci_request_region failure from error to warning
  drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
  drm/amdgpu: add fbdev suspend/resume on gpu reset
  drm/amd/amdgpu: Fix GPR read from debugfs (v2)
  drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct
  drm/komeda: mark PM functions as __maybe_unused
  drm/bridge: dw-hdmi: fix AVI frame colorimetry

io_uring: make sure accept honor rlimit nofile

Just like commit 4022e7af86be, this fixes the fact that
IORING_OP_ACCEPT ends up using get_unused_fd_flags(), which checks
current->signal->rlim[] for limits.

Add an extra argument to __sys_accept4_file() that allows us to pass
in the proper nofile limit, and grab it at request prep time.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: make sure openat/openat2 honor rlimit nofile

Dmitry reports that a test case shows that io_uring isn't honoring a
modified rlimit nofile setting. get_unused_fd_flags() checks the task
signal->rlimi[] for the limits. As this isn't easily inheritable,
provide a __get_unused_fd_flags() that takes the value instead. Then we
can grab it when the request is prepared (from the original task), and
pass that in when we do the async part part of the open.

Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Tested-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

gpio: Move devres calls to devres file

These two devres functions devm_gpiochip_[add|remove]()
were in the wrong file. They should be in gpiolib-devres.c
not gpiolib.c.

Link: https://lore.kernel.org/r/20200313081522.35143-1-linus.walleij@linaro.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

tools/power turbostat: Fix 32-bit capabilities warning

warning: `turbostat' uses 32-bit capabilities (legacy support in use)

Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks

Some Chromebook BIOS' do not export an ACPI LPIT, which is how
Linux finds the residency counter for CPU and SYSTEM low power states,
that is exports in /sys/devices/system/cpu/cpuidle/*residency_us

When these sysfs attributes are missing, check the debugfs attrubte
from the pmc_core driver, which accesses the same counter value.

Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Support Elkhart Lake

From a turbostat point of view the Tremont-based Elkhart Lake
is very similar to Goldmont, reuse the code of Goldmont.

Elkhart Lake does not support 'group turbo limit counter'
nor C3, adjust the code accordingly.

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Support Jasper Lake

Jasper Lake, like Elkhart Lake, uses a Tremont CPU.
So reuse the code.

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Support Ice Lake server

From a turbostat point of view, Ice Lake server looks like Sky Lake server.

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Support Tiger Lake

From a turbostat point of view, Tiger Lake looks like Ice Lake.

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Fix gcc build warnings

Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
[-Wstringop-truncation]

reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.

Signed-off-by: Len Brown <len.brown@intel.com>

tools/power turbostat: Support Cometlake

From a turbostat point of view, Cometlake is like Kabylake.

Suggested-by: Rui Zhang <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Merge tag 'drm-intel-fixes-2020-03-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc7:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com

Merge tag 'amd-drm-fixes-5.6-2020-03-19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-03-19:

amdgpu:
- Pageflip fix
- VCN clockgating fixes
- GPR debugfs fix for umr
- GPU reset fix
- eDP fix for MBP
- DCN2.x fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319204054.1036478-1-alexander.deucher@amd.com

KVM: PPC: Fix kernel crash with PR KVM

With PR KVM, shutting down a VM causes the host kernel to crash:

[  314.219284] BUG: Unable to handle kernel data access on read at 0xc00800000176c638
[  314.219299] Faulting instruction address: 0xc008000000d4ddb0
cpu 0x0: Vector: 300 (Data Access) at [c00000036da077a0]
    pc: c008000000d4ddb0: kvmppc_mmu_pte_flush_all+0x68/0xd0 [kvm_pr]
    lr: c008000000d4dd94: kvmppc_mmu_pte_flush_all+0x4c/0xd0 [kvm_pr]
    sp: c00000036da07a30
   msr: 900000010280b033
   dar: c00800000176c638
dsisr: 40000000
  current = 0xc00000036d4c0000
  paca    = 0xc000000001a00000   irqmask: 0x03   irq_happened: 0x01
    pid   = 1992, comm = qemu-system-ppc
Linux version 5.6.0-master-gku+ (greg@palmb) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #17 SMP Wed Mar 18 13:49:29 CET 2020
enter ? for help
[c00000036da07ab0] c008000000d4fbe0 kvmppc_mmu_destroy_pr+0x28/0x60 [kvm_pr]
[c00000036da07ae0] c0080000009eab8c kvmppc_mmu_destroy+0x34/0x50 [kvm]
[c00000036da07b00] c0080000009e50c0 kvm_arch_vcpu_destroy+0x108/0x140 [kvm]
[c00000036da07b30] c0080000009d1b50 kvm_vcpu_destroy+0x28/0x80 [kvm]
[c00000036da07b60] c0080000009e4434 kvm_arch_destroy_vm+0xbc/0x190 [kvm]
[c00000036da07ba0] c0080000009d9c2c kvm_put_kvm+0x1d4/0x3f0 [kvm]
[c00000036da07c00] c0080000009da760 kvm_vm_release+0x38/0x60 [kvm]
[c00000036da07c30] c000000000420be0 __fput+0xe0/0x310
[c00000036da07c90] c0000000001747a0 task_work_run+0x150/0x1c0
[c00000036da07cf0] c00000000014896c do_exit+0x44c/0xd00
[c00000036da07dc0] c0000000001492f4 do_group_exit+0x64/0xd0
[c00000036da07e00] c000000000149384 sys_exit_group+0x24/0x30
[c00000036da07e20] c00000000000b9d0 system_call+0x5c/0x68

This is caused by a use-after-free in kvmppc_mmu_pte_flush_all()
which dereferences vcpu->arch.book3s which was previously freed by
kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy()
is called after kvmppc_core_vcpu_free() since commit ff030fdf5573
("KVM: PPC: Move kvm_vcpu_init() invocation to common code").

The kvmppc_mmu_destroy() helper calls one of the following depending
on the KVM backend:

- kvmppc_mmu_destroy_hv() which does nothing (Book3s HV)

- kvmppc_mmu_destroy_pr() which undoes the effects of
  kvmppc_mmu_init() (Book3s PR 32-bit)

- kvmppc_mmu_destroy_pr() which undoes the effects of
  kvmppc_mmu_init() (Book3s PR 64-bit)

- kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc)

It turns out that this is only relevant to PR KVM actually. And both
32 and 64 backends need vcpu->arch.book3s to be valid when calling
kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy()
from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the
beginning of kvmppc_core_vcpu_free_pr(). This is consistent with
kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr().

For the same reason, if kvmppc_core_vcpu_create_pr() returns an
error then this means that kvmppc_mmu_init() was either not called
or failed, in which case kvmppc_mmu_destroy() should not be called.
Drop the line in the error path of kvm_arch_vcpu_create().

Fixes: ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/158455341029.178873.15248663726399374882.stgit@bahia.lan

drm/amd/display: Fix pageflip event race condition for DCN.

Commit '16f17eda8bad ("drm/amd/display: Send vblank and user
events at vsartup for DCN")' introduces a new way of pageflip
completion handling for DCN, and some trouble.

The current implementation introduces a race condition, which
can cause pageflip completion events to be sent out one vblank
too early, thereby confusing userspace and causing flicker:

prepare_flip_isr():

1. Pageflip programming takes the ddev->event_lock.
2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED
3. Releases ddev->event_lock.

--> Deadline for surface address regs double-buffering passes on
    target pipe.

4. dc_commit_updates_for_stream() MMIO programs the new pageflip
   into hw, but too late for current vblank.

=> pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete
   in current vblank due to missing the double-buffering deadline
   by a tiny bit.

5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires,
   dm_dcn_crtc_high_irq() gets called.

6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the
   pageflip has been completed/will complete in this vblank and
   sends out pageflip completion event to userspace and resets
   pflip_status = AMDGPU_FLIP_NONE.

=> Flip completion event sent out one vblank too early.

This behaviour has been observed during my testing with measurement
hardware a couple of time.

The commit message says that the extra flip event code was added to
dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events
in case the pflip irq doesn't fire, because the "DCH HUBP" component
is clock gated and doesn't fire pflip irqs in that state. Also that
this clock gating may happen if no planes are active. This suggests
that the problem addressed by that commit can't happen if planes
are active.

The proposed solution is therefore to only execute the extra pflip
completion code iff the count of active planes is zero and otherwise
leave pflip completion handling to the pflip irq handler, for a
more race-free experience.

Note that i don't know if this fixes the problem the original commit
tried to address, as i don't know what the test scenario was. It
does fix the observed too early pageflip events though and points
out the problem introduced.

Fixes: 16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'mmc-v5.6-rc6' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:

- rtsx_pci: Fix support for some various speed modes

- sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2

- sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier

- sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10

- sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320

* tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
  mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
  mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier
  mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012)
  mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320

arm64: compat: Fix syscall number of compat_clock_getres

The syscall number of compat_clock_getres was erroneously set to 247
(__NR_io_cancel!) instead of 264. This causes the vDSO fallback of
clock_getres() to land on the wrong syscall for compat tasks.

Fix the numbering.

Cc: <stable@vger.kernel.org>
Fixes: 53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

Merge tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Three small smb3 fixes, two for stable"

* tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: fiemap: do not return EINVAL if get nothing
  CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first
  cifs: potential unintitliazed error code in cifs_getattr()

Merge tag 'kbuild-fixes-v5.6-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- fix __uint128_t capability test in Kconfig when GCC that defaults to
   32-bit is used to build the 64-bit kernel

- suppress new noisy Clang warnings -Wpointer-to-enum-cast

- move the namespace field in Module.symvers for the backward
   compatibility reason for the depmod tool

- use available compression for initramdisk when INTRAMFS_SOURCE is
   defined, which was the original behavior

- fix modpost to handle correct large section numbers when it refers to
   modversion CRCs and module namespaces

- fix comments and documents

* tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/kallsyms: fix wrong kallsyms_relative_base
  modpost: Get proper section index by get_secindex() instead of st_shndx
  initramfs: restore default compression behavior
  modpost: move the namespace field in Module.symvers last
  kbuild: Disable -Wpointer-to-enum-cast
  kbuild: doc: fix references to other documents
  int128: fix __uint128_t compiler test in Kconfig
  kconfig: introduce m32-flag and m64-flag
  kbuild: Fix inconsistent comment

rtc: max8907: add missing select REGMAP_IRQ

I have hit the following build error:

armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'

max8907 should select REGMAP_IRQ

Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/kallsyms: fix wrong kallsyms_relative_base

There is the code in the read_symbol function in 'scripts/kallsyms.c':

if (is_ignored_symbol(name, type))
return NULL;

/* Ignore most absolute/undefined (?) symbols. */
if (strcmp(name, "_text") == 0)
_text = addr;

But the is_ignored_symbol function returns true for name="_text" and
type='A'. So the next condition is not executed and the _text variable
is always zero.

It makes the wrong kallsyms_relative_base symbol as a result of the code
(CONFIG_KALLSYMS_BASE_RELATIVE is defined):

if (base_relative) {
output_label("kallsyms_relative_base");
output_address(relative_base);
printf("\n");
}

Because the output_address function uses the _text variable.

So the kallsyms_lookup function and all related functions in the kernel
do not work properly. For example, the stack trace in oops:

Call Trace:
[aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable)
[aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010
[aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4
[aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010
[aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010

The right stack trace:

Call Trace:
[aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable)
[aa095e98] [80002b64] do_one_initcall+0x40/0x1f0
[aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8
[aa095f28] [80002ed0] kernel_init+0x14/0x124
[aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c

[masahiroy@kernel.org:

This issue happens on binutils <= 2.22
The following commit fixed it:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a

The symbol type of _text is 'T' on binutils >= 2.23
The minimal supported binutils version for the kernel build is 2.21
]

Signed-off-by: Mikhail Petrov <Mikhail.Petrov@mir.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

arm64: kpti: Fix "kpti=off" when KASLR is enabled

Enabling KASLR forces the use of non-global page-table entries for kernel
mappings, as this is a decision that we have to make very early on before
mapping the kernel proper. When used in conjunction with the "kpti=off"
command-line option, it is possible to use non-global kernel mappings but
with the kpti trampoline disabled.

Since commit 09e3c22a86f6 ("arm64: Use a variable to store non-global
mappings decision"), arm64_kernel_unmapped_at_el0() reflects only the use of
non-global mappings and does not take into account whether the kpti
trampoline is enabled. This breaks context switching of the TPIDRRO_EL0
register for 64-bit tasks, where the clearing of the register is deferred to
the ret-to-user code, but it also breaks the ARM SPE PMU driver which
helpfully recommends passing "kpti=off" on the command line!

Report whether or not KPTI is actually enabled in
arm64_kernel_unmapped_at_el0() and check the 'arm64_use_ng_mappings' global
variable directly when determining the protection flags for kernel mappings.

Cc: Mark Brown <broonie@kernel.org>
Reported-by: Hongbo Yao <yaohongbo@huawei.com>
Tested-by: Hongbo Yao <yaohongbo@huawei.com>
Fixes: 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision")
Signed-off-by: Will Deacon <will@kernel.org>

Merge tag 'drm-misc-fixes-2020-03-18-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- drm/lease: fix WARNING in idr_destroy
- Fix AVI frame colorimetry in the dw-hdmi bridge.
- Fix compiler warning in komeda by annotating functions as __maybe_unused.
- Downgrade bochs pci_request_region failure from error to warning to
workaround firmware fb.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7654ac39-deb8-c9ca-9fd5-ef77b2636380@linux.intel.com

drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check

fix typo for vcn2.5/jpeg2.5 idle check

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo for vcn2/jpeg2 idle check

fix typo for vcn2/jpeg2 idle check

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo for vcn1 idle check

fix typo for vcn1 idle check

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

locks: reinstate locks_delete_block optimization

There is measurable performance impact in some synthetic tests due to
commit 6d390e4b5d48 (locks: fix a potential use-after-free problem when
wakeup a waiter). Fix the race condition instead by clearing the
fl_blocker pointer after the wake_up, using explicit acquire/release
semantics.

This does mean that we can no longer use the clearing of fl_blocker as
the wait condition, so switch the waiters over to checking whether the
fl_blocked_member list_head is empty.

Reviewed-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Fixes: 6d390e4b5d48 (locks: fix a potential use-after-free problem when wakeup a waiter)
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

modpost: Get proper section index by get_secindex() instead of st_shndx

(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets
wrong section index by st_shndx if requested symbol contains extended section
index that is more than 65535. In this case, we need to get proper section index
by .symtab_shndx section.

Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections"
shows the issue.

Fixes: 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Fixes: e84f9fbbece1 ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

mm: slub: be more careful about the double cmpxchg of freelist

This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit fd4d9c7d0c71 ("mm: slub:
add missing TID bump..").

The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.

Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).

But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.

Acked-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: slub: add missing TID bump in kmem_cache_alloc_bulk()

When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu
freelist of length M, and N > M > 0, it will first remove the M elements
from the percpu freelist, then call ___slab_alloc() to allocate the next
element and repopulate the percpu freelist. ___slab_alloc() can re-enable
IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc()
to properly commit the freelist head change.

Fix it by unconditionally bumping c->tid when entering the slowpath.

Cc: stable@vger.kernel.org
Fixes: ebe909e0fdb3 ("slub: improve bulk alloc strategy")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/lease: fix WARNING in idr_destroy

drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.

drm_master_put
->drm_master_destroy
->idr_destroy

So we needn't call idr_destroy again.

Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com

tty: fix compat TIOCGSERIAL checking wrong function ptr

Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
checking for the presence of the ->set_serial function pointer rather
than ->get_serial. This appears to be a copy-and-paste error, since
->get_serial is the function pointer that is called as well as the
pointer that is checked by the non-compat version of TIOCGSERIAL.

Fix this by checking the correct function pointer.

Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200224182044.234553-3-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: fix compat TIOCGSERIAL leaking uninitialized memory

Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
copying a whole 'serial_struct32' to userspace rather than individual
fields, but failed to initialize all padding and fields -- namely the
hole after the 'iomem_reg_shift' field, and the 'reserved' field.

Fix this by initializing the struct to zero.

[v2: use sizeof, and convert the adjacent line for consistency.]

Reported-by: syzbot+8da9175e28eadcb203ce@syzkaller.appspotmail.com
Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200224182044.234553-2-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: drop outdated comments about release_tty() locking

The current version of the TTY code unlocks the tty_struct(s) before
release_tty() rather than after. Moreover, tty_unlock_pair() no longer
exists. Thus, remove the outdated comments regarding tty_unlock_pair().

Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200224073359.292795-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: rtsx_pci: Fix support for speed-modes that relies on tuning

The TX/RX register should not be treated the same way to allow for better
support of tuning. Fix this by using a default initial value for TX.

Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com
[Ulf: Updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Elkhart Lake CPU support

This adds support for the Trace Hub in Elkhart Lake CPU.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200317062215.15598-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: Fix user-visible error codes

There are a few places in the driver that end up returning ENOTSUPP to
the user, replace those with EINVAL.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: msu: Fix the unexpected state warning

The unexpected state warning should only warn on illegal state
transitions. Fix that.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 615c164da0eb4 ("intel_th: msu: Introduce buffer interface")
Cc: stable@vger.kernel.org # v5.4+
Link: https://lore.kernel.org/r/20200317062215.15598-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: sys-t: Fix the use of time_after()

The operands of time_after() are in a wrong order in both instances in
the sys-t driver. Fix that.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets")
Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support")
Cc: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-5.6a' of git://git./linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes in the 5.6 cycle.

* adxl372
  - Fix marking of buffered values as big endian.
* ak8974
  - Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
  - Fix differential mode by ensuring configuration set correctly.
* ping
  - Use the write sensor type for of_ping_match table.
* sps30
  - Kconfig build dependency fix.
* st-sensors
  - Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
  - Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
  - Make sure master mode is disabled when stopping.
* vcnl400
  - Update some sampling periods based on new docs.

* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

Merge tag 'usb-serial-5.6-rc7' of https://git./linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.6-rc7

Here are a couple of new device ids for 5.6-rc.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add device-id for HP LD381
USB: serial: option: add ME910G1 ECM composition 0x110b

arm64: smp: fix crash_smp_send_stop() behaviour

On a system configured to trigger a crash_kexec() reboot, when only one CPU
is online and another CPU panics while starting-up, crash_smp_send_stop()
will fail to send any STOP message to the other already online core,
resulting in fail to freeze and registers not properly saved.

Moreover even if the proper messages are sent (case CPUs > 2)
it will similarly fail to account for the booting CPU when executing
the final stop wait-loop, so potentially resulting in some CPU not
been waited for shutdown before rebooting.

A tangible effect of this behaviour can be observed when, after a panic
with kexec enabled and loaded, on the following reboot triggered by kexec,
the cpu that could not be successfully stopped fails to come back online:

[  362.291022] ------------[ cut here ]------------
[  362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[  362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  362.292400] Modules linked in:
[  362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105
[  362.293136] Hardware name: Foundation-v8A (DT)
[  362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO)
[  362.294063] pc : has_cpuid_feature+0xf0/0x348
[  362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8
[  362.294280] sp : ffff800011b1bf60
[  362.294362] x29: ffff800011b1bf60 x28: 0000000000000000
[  362.294534] x27: 0000000000000000 x26: 0000000000000000
[  362.294631] x25: 0000000000000000 x24: ffff80001189a25c
[  362.294718] x23: 0000000000000000 x22: 0000000000000000
[  362.294803] x21: ffff8000114aa018 x20: ffff800011156a00
[  362.294897] x19: ffff800010c944a0 x18: 0000000000000004
[  362.294987] x17: 0000000000000000 x16: 0000000000000000
[  362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c
[  362.295165] x13: 0000000000000384 x12: 0000000000000000
[  362.295251] x11: 0000000000000000 x10: 00400032b5503510
[  362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204
[  362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001
[  362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000
[  362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8
[  362.295683] x1 : 0000000000180420 x0 : 0000000000180480
[  362.296011] Call trace:
[  362.296257]  has_cpuid_feature+0xf0/0x348
[  362.296350]  verify_local_elf_hwcaps+0x84/0xe8
[  362.296424]  check_local_cpu_capabilities+0x44/0x128
[  362.296497]  secondary_start_kernel+0xf4/0x188
[  362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000)
[  362.298652] SMP: stopping secondary CPUs
[  362.300615] Starting crashdump kernel...
[  362.301168] Bye!
[    0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0]
[    0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020
[    0.000000] Machine model: Foundation-v8A
[    0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '')
[    0.000000] printk: bootconsole [pl11] enabled
.....
[    0.138024] rcu: Hierarchical SRCU implementation.
[    0.153472] its@2f020000: unable to locate ITS domain
[    0.154078] its@2f020000: Unable to locate ITS domain
[    0.157541] EFI services will not be available.
[    0.175395] smp: Bringing up secondary CPUs ...
[    0.209182] psci: failed to boot CPU1 (-22)
[    0.209377] CPU1: failed to boot: -22
[    0.274598] Detected PIPT I-cache on CPU2
[    0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000
[    0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0]
[    0.369053] Detected PIPT I-cache on CPU3
[    0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000
[    0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0]
[    0.401707] smp: Brought up 1 node, 3 CPUs
[    0.404057] SMP: Total of 3 processors activated.

Make crash_smp_send_stop() account also for the online status of the
calling CPU while evaluating how many CPUs are effectively online: this way
the right number of STOPs is sent and all other stopped-cores's registers
are properly saved.

Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: smp: fix smp_send_stop() behaviour

On a system with only one CPU online, when another one CPU panics while
starting-up, smp_send_stop() will fail to send any STOP message to the
other already online core, resulting in a system still responsive and
alive at the end of the panic procedure.

[  186.700083] CPU3: shutdown
[  187.075462] CPU2: shutdown
[  187.162869] CPU1: shutdown
[  188.689998] ------------[ cut here ]------------
[  188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[  188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  188.692444] Modules linked in:
[  188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104
[  188.693175] Hardware name: Foundation-v8A (DT)
[  188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO)
[  188.694183] pc : has_cpuid_feature+0xf0/0x348
[  188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8
[  188.694410] sp : ffff800011b1bf60
[  188.694536] x29: ffff800011b1bf60 x28: 0000000000000000
[  188.694707] x27: 0000000000000000 x26: 0000000000000000
[  188.694801] x25: 0000000000000000 x24: ffff80001189a25c
[  188.694905] x23: 0000000000000000 x22: 0000000000000000
[  188.694996] x21: ffff8000114aa018 x20: ffff800011156a38
[  188.695089] x19: ffff800010c944a0 x18: 0000000000000004
[  188.695187] x17: 0000000000000000 x16: 0000000000000000
[  188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa
[  188.695371] x13: 0000000000000002 x12: 0000000000002592
[  188.695472] x11: 0000000000000080 x10: 00400032b5503510
[  188.695572] x9 : 0000000000000000 x8 : ffff800010c80204
[  188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001
[  188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000
[  188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8
[  188.695919] x1 : 0000000000180420 x0 : 0000000000180480
[  188.696253] Call trace:
[  188.696410]  has_cpuid_feature+0xf0/0x348
[  188.696504]  verify_local_elf_hwcaps+0x84/0xe8
[  188.696591]  check_local_cpu_capabilities+0x44/0x128
[  188.696666]  secondary_start_kernel+0xf4/0x188
[  188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000)
[  188.698639] ---[ end trace 3f12ca47652f7b72 ]---
[  188.699160] Kernel panic - not syncing: Attempted to kill the idle task!
[  188.699546] Kernel Offset: disabled
[  188.699828] CPU features: 0x00004,20c02008
[  188.700012] Memory Limit: none
[  188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

[root@arch ~]# echo Helo
Helo
[root@arch ~]# cat /proc/cpuinfo | grep proce
processor : 0

Make smp_send_stop() account also for the online status of the calling CPU
while evaluating how many CPUs are effectively online: this way, the right
number of STOPs is sent, so enforcing a proper freeze of the system at the
end of panic even under the above conditions.

Fixes: 08e875c16a16c ("arm64: SMP support")
Reported-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

USB: cdc-acm: fix rounding error in TIOCSSERIAL

By default, tty_port_init() initializes those parameters to a multiple
of HZ. For instance in line 69 of tty_port.c:
port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69

With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04
linux-image-4.15.0-37-generic), the default setting for close_delay is
thus 125.

When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in
user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then
executed with the same setting '12', the value is interpreted as '120'
which is different from the current setting and a EPERM error may be
raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919

Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL

close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.

Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters

We have been receiving bug reports that ethernet connections over
RTL8153 based ethernet adapters stops working after a while with
errors like these showing up in dmesg when the ethernet stops working:

[12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout

This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1
docks and with generic USB to ethernet dongles using the RTL8153
chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to
the kernel commandline and all users who have tried this report that
this fixes this.

Also note that we already have an existing NO_LPM quirk for the RTL8153
used in the Microsoft Surface Dock (where it uses a different usb-id).

This commit adds a NO_LPM quirk for the generic Realtek RTL8153
0bda:8153 usb-id, fixing the Tx timeout errors on these devices.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931
Cc: stable@vger.kernel.org
Cc: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>