Ville Syrjälä [Mon, 20 Jan 2020 17:47:22 +0000 (19:47 +0200)]
drm/i915: Move intel_atomic_state_free() into intel_atomic.c
Move intel_atomic_state_free() next to its counterpart.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-13-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:21 +0000 (19:47 +0200)]
drm/i915: s/init_cdclk/init_cdclk_hw/
Give the cdclk init/uninit functions a _hw suffix to make
it clear they are about initializing the actual hardware.
I'll be wanting to to add a intel_cdclk_init() which is
purely initializing software structures.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:20 +0000 (19:47 +0200)]
drm/i915: swap() the entire cdclk state
To make life less confusing let's swap() the entire cdclk state
rather than swapping some parts, copying other parts, and leaving
the rest just as is.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-11-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:19 +0000 (19:47 +0200)]
drm/i915: Extract intel_cdclk_state
Use the same structure to store the cdclk state in both
intel_atomic_state and dev_priv. First step towards proper
old vs. new cdclk states.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:18 +0000 (19:47 +0200)]
drm/i915: Simplify intel_set_cdclk_{pre,post}_plane_update() calling convention
Move all the old vs. new state shenanigans
into intel_set_cdclk_{pre,post}_plane_update() so that the caller
doesn't need to know any of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-9-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:17 +0000 (19:47 +0200)]
drm/i915: s/cdclk_state/cdclk_config/
I want to have a higher level cdclk state object so let's rename
the current lower level thing to cdclk_config (because I lack
imagination).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:16 +0000 (19:47 +0200)]
drm/i915: s/need_cd2x_updare/can_cd2x_update/
intel_cdclk_needs_cd2x_update() is named rather confusingly.
We don't have to do a cd2x update, rather we are allowed to
do one (as opposed to a full PLL reprogramming with its heavy
handed modeset). So let's rename the function to
intel_cdclk_can_cd2x_update().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-7-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:15 +0000 (19:47 +0200)]
drm/i915: Collect more cdclk state under the same roof
Move the min_cdclk[] and min_voltage_level[] arrays under the
rest of the cdclk state. And while at it provide a simple
helper (intel_cdclk_clear_state()) to clear the state during
the ww_mutex backoff dance.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:14 +0000 (19:47 +0200)]
drm/i915: Move more cdclk state handling into the cdclk code
Move the initial setup of state->{cdclk,min_cdclk[],min_voltage_level[]}
into intel_modeset_calc_cdclk(), and we'll move the counterparts into
intel_cdclk_swap_state(). This encapsulates the cdclk state much better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:13 +0000 (19:47 +0200)]
drm/i915: Nuke skl wm.dirty_pipes bitmask
The dirty_pipes bitmask is now unused. Get rid of it.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Mon, 20 Jan 2020 17:47:12 +0000 (19:47 +0200)]
drm/i915: Move linetime wms into the crtc state
The linetime watermarks really have very little in common with the
plane watermarks. It looks to be cleaner to simply track them in
the crtc_state and program them from the normal modeset/fastset
paths.
The only dark cloud comes from the fact that the register is
still supposedly single buffered. So in theory it might still
need some form of two stage programming. Note that even though
HSW/BDWhave two stage programming we never computed any special
intermediate values for the linetime watermarks, and on SKL+
we don't even have the two stage stuff plugged in since everything
else is double buffered. So let's assume it's all fine and
continue doing what we've been doing.
Actually on HSW/BDW the value should not even change without
a full modeset since it doesn't account for pfit downscaling.
Thus only fastboot might be affected. But on SKL+ the pfit
scaling factor is take into consideration so the value may
change during any fastset.
As a bonus we'll plug this thing into the state
checker/dump now.
v2: Rebase due to bigjoiner prep
v2: Only compute ips linetime for IPS capable pipes.
Bspec says the register values is ignored for other
pipes, but in fact it can't even be written so the
state checker becomes unhappy if we don't compute
it as zero.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Ville Syrjälä [Mon, 20 Jan 2020 17:47:11 +0000 (19:47 +0200)]
drm/i915: Polish WM_LINETIME register stuff
Let's store the normal and IPS linetime watermarks individually,
and while at it we'll pimp the register definitions as well.
v2: Deal with gvt
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-2-ville.syrjala@linux.intel.com
Jani Nikula [Tue, 28 Jan 2020 16:28:50 +0000 (18:28 +0200)]
drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms
intel_dp_set_m_n() has a clear place in the DDI DP specific pre-enable
hook.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128162850.8660-3-jani.nikula@intel.com
Vandita Kulkarni [Tue, 28 Jan 2020 16:28:49 +0000 (18:28 +0200)]
drm/i915/dsi: Enable ICL DSI transcoder as part of encoder->enable
Enable the dsi transcoder, panel and backlight as part of
encoder->enable and not encoder->pre_enable. We need to have pipe src
size, among other things, set before enabling the transcoder, to avoid
FIFO underruns and possibly other issues.
v2 by Jani:
- Rebase on the crtc enable sequence update
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128162850.8660-2-jani.nikula@intel.com
Jani Nikula [Tue, 28 Jan 2020 16:28:48 +0000 (18:28 +0200)]
drm/i915: move pipe, pch and vblank enable to encoders on DDI platforms
To allow better flexibility for encoder specific code, push
intel_enable_pipe(), lpt_pch_enable() and intel_crtc_vblank_on() down to
the encoders from hsw_crtc_enable().
There's slight duplication, but also more clarity with the reduced
conditional statements.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128162850.8660-1-jani.nikula@intel.com
Jani Nikula [Tue, 28 Jan 2020 15:19:42 +0000 (17:19 +0200)]
drm/i915/debugfs: remove VBT data about DRRS
The debugfs is not the place to print duplicated info about VBT data.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128151942.2590-1-jani.nikula@intel.com
Chris Wilson [Thu, 30 Jan 2020 18:17:10 +0000 (18:17 +0000)]
drm/i915: Use the async worker to avoid reclaim tainting the ggtt->mutex
On Braswell and Broxton (also known as Valleyview and Apollolake), we
need to serialise updates of the GGTT using the big stop_machine()
hammer. This has the side effect of appearing to lockdep as a possible
reclaim (since it uses the cpuhp mutex and that is tainted by per-cpu
allocations). However, we want to use vm->mutex (including ggtt->mutex)
from within the shrinker and so must avoid such possible taints. For this
purpose, we introduced the asynchronous vma binding and we can apply it
to the PIN_GLOBAL so long as take care to add the necessary waits for
the worker afterwards.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/211
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130181710.2030251-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 30 Jan 2020 18:17:09 +0000 (18:17 +0000)]
drm/i915/gt: Rename i915_gem_restore_ggtt_mappings() for its new placement
The i915_ggtt now sits beneath gt/ outside of the auspices of gem/ and
should be given a fresh name to reflect that. We also want to give it a
name that reflects its role in the system suspend/resume, with the
intention of pulling together all the GGTT operations (e.g. restoring
the fence registers once they are pulled under gt/intel_ggtt_detiler.c)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Rreviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130181710.2030251-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 30 Jan 2020 14:39:31 +0000 (14:39 +0000)]
drm/i915/gem: Tighten checks and acquiring the mmap object
Make sure we hold the rcu lock as we acquire the rcu protected reference
of the object when looking it up from the associated mmap vma.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1083
Fixes:
cc662126b413 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130143931.1906301-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 30 Jan 2020 13:51:36 +0000 (13:51 +0000)]
drm/i915/fbc: __intel_fbc_cleanup_cfb() may be called multiple times
Avoid releasing the same stolen nodes causing a use-after-free and/or
explosions as the self-checks fail, as __intel_fbc_cleanup_cfb() may be
called multiple times during module unload.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130135136.1878646-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 30 Jan 2020 09:22:38 +0000 (09:22 +0000)]
drm/i915/gt: Skip global serialisation of clear_range for bxt vtd
VT'd on Broxton and on Braswell require serialisation of GGTT updates.
However, it seems to only be required for insertion, so drop the
complication and heavyweight stop_machine() for clears. The range will
be serialised again before use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130092239.1743672-1-chris@chris-wilson.co.uk
Wambui Karuga [Tue, 28 Jan 2020 07:14:36 +0000 (10:14 +0300)]
drm/i915/ring: convert to new logging macros in gt/intel_ring_submission.c
Manually convert the remaining instance of the printk based drm logging
macros to the struct drm_device based logging macros in
i915/gt/intel_ring_submission.c
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128071437.9284-8-wambui.karugax@gmail.com
Wambui Karuga [Tue, 28 Jan 2020 07:14:35 +0000 (10:14 +0300)]
drm/i915/gt: convert to new logging macros in gt/intel_gt.c
Convert remaining instances of the printk based logging macros in
i915/gt/intel_gt to the struct drm_device based logging macros.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128071437.9284-7-wambui.karugax@gmail.com
Wambui Karuga [Tue, 28 Jan 2020 07:14:33 +0000 (10:14 +0300)]
drm/i915/engine_cs: use new drm logging macros in gt/intel_engine_cs.c
Conversion of the remaining printk based drm logging macros to the new
struct drm_device based logging macros in i915/gt/intel_engine_cs.c.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128071437.9284-5-wambui.karugax@gmail.com
Wambui Karuga [Tue, 28 Jan 2020 07:14:32 +0000 (10:14 +0300)]
drm/i915/reset: conversion to new drm logging macros in gt/intel_reset.c
This converts most instances of the printk based drm logging macros in
i915/gt/intel_resect.c to the new struct drm_based logging macros.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128071437.9284-4-wambui.karugax@gmail.com
Wambui Karuga [Tue, 28 Jan 2020 07:14:31 +0000 (10:14 +0300)]
drm/i915/ggtt: use new drm logging macros in gt/intel_ggtt.c
Manual conversion of the printk based logging macros to the new struct
drm_based logging macros in drm/i915/gt/intel_ggtt.c.
Also includes extracting the struct drm_i915_private device from various
intel types to use in the new macros.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128071437.9284-3-wambui.karugax@gmail.com
José Roberto de Souza [Wed, 29 Jan 2020 23:23:45 +0000 (15:23 -0800)]
drm/i915: Fix preallocated barrier list append
Only the first and the last nodes were being added to
ref->preallocated_barriers.
Renaming variables to make it more easy to read.
Fixes:
841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129232345.84512-1-jose.souza@intel.com
Lionel Landwerlin [Wed, 29 Jan 2020 18:16:38 +0000 (20:16 +0200)]
drm/i915: add extra slice common debug registers
Could be helpful for debugging purposes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129181638.1528150-1-lionel.g.landwerlin@intel.com
Chris Wilson [Wed, 29 Jan 2020 16:59:35 +0000 (16:59 +0000)]
drm/i915/execlists: Ignore discrepancies in pending[] across resets
When we reset the engine, we first remove the guilty request from the
active list. If it so happens that there is a pending preemption event
to process before we handle the reset, when we inspect that event we
find ourselves a little confused as we have bent the rules slightly to
perform the reset.
Just ignore any discrepancies inside reset, we know we'll start again
from scratch afterwards.
<0>[ 536.940213] <idle>-0 6..s1 537441383us : execlists_reset: 0000:00:02.0 vcs0: reset for CS error
<0>[ 536.940213] i915_sel-7302 2d..1 537441386us : trace_ports: 0000:00:02.0 vcs0: submit { 10c59:2*, 10c5a:2 }
<0>[ 536.940213] <idle>-0 6d.s2 537471320us : __i915_request_unsubmit: 0000:00:02.0 vcs0: fence 10c59:2, current 1
<0>[ 536.940213] <idle>-0 6d.s2 537471321us : execlists_hold: 0000:00:02.0 vcs0: fence 10c59:2, current 1 on hold
<0>[ 536.940213] <idle>-0 6.Ns1 537471328us : intel_engine_reset: 0000:00:02.0 vcs0: flags=10
<0>[ 536.940213] <idle>-0 6.Ns1 537471421us : execlists_reset_prepare: 0000:00:02.0 vcs0: depth<-1
<0>[ 536.940213] <idle>-0 6.Ns1 537471422us : intel_engine_stop_cs: 0000:00:02.0 vcs0:
<0>[ 536.940213] <idle>-0 6.Ns1 537472424us : intel_engine_stop_cs: 0000:00:02.0 vcs0: timed out on STOP_RING -> IDLE
<0>[ 536.940213] <idle>-0 6.Ns1 537472429us : __intel_gt_reset: 0000:00:02.0 engine_mask=4
<0>[ 536.940213] <idle>-0 6.Ns1 537472442us : execlists_reset_rewind: 0000:00:02.0 vcs0:
<0>[ 536.940213] <idle>-0 6dNs2 537472443us : process_csb: 0000:00:02.0 vcs0: cs-irq head=4, tail=5
<0>[ 536.940213] <idle>-0 6dNs2 537472444us : process_csb: 0000:00:02.0 vcs0: csb[5]: status=0x00008002:0x20000060
<0>[ 536.940213] <idle>-0 6dNs2 537472464us : trace_ports: 0000:00:02.0 vcs0: preempted { 10c59:2*, 0:0 }
<0>[ 536.940213] <idle>-0 6dNs2 537472465us : trace_ports: 0000:00:02.0 vcs0: promote { 10c59:2*, 10c5a:2 }
<0>[ 536.940213] <idle>-0 6dNs2 537472706us : assert_pending_valid: assert_pending_valid:1417 GEM_BUG_ON(!i915_request_is_active(rq))
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129165935.1266132-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 28 Jan 2020 20:43:15 +0000 (20:43 +0000)]
drm/i915/gt: Hook up CS_MASTER_ERROR_INTERRUPT
Now that we have offline error capture and can reset an engine from
inside an atomic context while also preserving the GPU state for
post-mortem analysis, it is time to handle error interrupts thrown by
the command parser.
This provides a much, much faster mechanism for us to detect known
problems than using heartbeats/hangchecks, and also provides a mechanism
for when those are disabled. However, it is limited to problems the HW
can detect in the CS and so not a complete solution for detecting lockups.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128204318.4182039-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 28 Jan 2020 17:16:14 +0000 (17:16 +0000)]
drm/i915/execlist: Mark up racy read of execlists->pending[0]
We write to execlists->pending[0] in process_csb() to acknowledge the
completion of the ESLP update, outside of the main spinlock. When we
check the current status of the previous submission in
__execlists_submission_tasklet() we should therefore use READ_ONCE() to
reflect and document the unsynchronized read.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128171614.3845825-1-chris@chris-wilson.co.uk
Matthew Auld [Wed, 29 Jan 2020 09:33:43 +0000 (09:33 +0000)]
drm/i915/selftests/perf: measure memcpy bw between regions
Measure the memcpy bw between our CPU accessible regions, trying all
supported mapping combinations(WC, WB) across various sizes.
v2:
use smaller sizes
throw in memcpy32/memcpy64/memcpy_from_wc
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129093343.194570-1-matthew.auld@intel.com
Jani Nikula [Fri, 17 Jan 2020 15:05:51 +0000 (17:05 +0200)]
drm/i915/debugfs: remove i915_dpcd file
We've long had the more generic /dev/drm_dp_auxN devices for the same
purpose. Drop the redundant and limited DPCD debugfs file.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200117150551.9836-1-jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:10 +0000 (20:26 +0200)]
drm/i915/psr: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/652e16e6168691f89b5cb8c91278a0d960f8f1a9.1580149467.git.jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:09 +0000 (20:26 +0200)]
drm/i915/hdcp: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a58f536d25d9cd6da510da49663508cd264eee0f.1580149467.git.jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:08 +0000 (20:26 +0200)]
drm/i915/dp: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/abcb2d44fd4d6e5f995a3520b327f746ae90428a.1580149467.git.jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:07 +0000 (20:26 +0200)]
drm/i915/display_power: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/939ffbddf2879e21b9e449f1ae0b621640ecf7ff.1580149467.git.jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:06 +0000 (20:26 +0200)]
drm/i915/display: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41b937d632edb59ca2ddecefd9ac613c2f998d58.1580149467.git.jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:05 +0000 (20:26 +0200)]
drm/i915/ddi: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c6050201849484a7f4681ce6e2f69cb7cb26756.1580149467.git.jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:04 +0000 (20:26 +0200)]
drm/i915/combo_phy: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48b61928049d3be6541a16789622b4479ea26a84.1580149467.git.jani.nikula@intel.com
Jani Nikula [Mon, 27 Jan 2020 18:26:03 +0000 (20:26 +0200)]
drm/i915/icl_dsi: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0c3876a5beb5a33d8ab1c93e98dd16fd75339481.1580149467.git.jani.nikula@intel.com
Chris Wilson [Tue, 28 Jan 2020 18:34:58 +0000 (18:34 +0000)]
drm/i915/selftests: Lock the drm_mm as we search
Hold onto the vm->mutex (to lock the drm_mm) to ensure that the rbtree
is stable as we search it for our scratch node.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128183458.3860022-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 28 Jan 2020 15:16:47 +0000 (15:16 +0000)]
drm/i915/trace: i915_request.prio is a signed value
Don't confuse the poor developer by writing a negative value as a very
large positive, as the flow of requests is already complex enough.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128151647.3820659-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 27 Jan 2020 23:15:40 +0000 (23:15 +0000)]
drm/i915/gt: Lift set-wedged engine dumping out of user paths
The user (e.g. gem_eio) can manipulate the driver into wedging itself,
allowing the user to trigger voluminous logging of inconsequential
details. If we lift the dump to direct calls to intel_gt_set_wedged(),
out of the intel_reset failure handling, we keep the detail logging for
what we expect are true HW or test failures without being tricked.
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200127231540.3302516-6-chris@chris-wilson.co.uk
Chris Wilson [Mon, 27 Jan 2020 23:15:37 +0000 (23:15 +0000)]
drm/i915/gt: Tidy repetition in declaring gen8+ interrupts
We use the same interrupt mask for each engine, so define it once in a
local and reuse.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200127231540.3302516-3-chris@chris-wilson.co.uk
Chris Wilson [Mon, 27 Jan 2020 23:15:36 +0000 (23:15 +0000)]
drm/i915/gt: Reorganise gen8+ interrupt handler
We always use a deferred bottom-half (either tasklet or irq_work) for
processing the response to an interrupt which means we can recombine the
GT irq ack+handler into one. This simplicity is important in later
patches as we will need to handle and then ack multiple interrupt levels
before acking the GT and master interrupts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200127231540.3302516-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 28 Jan 2020 11:34:26 +0000 (11:34 +0000)]
drm/i915: Skip capturing errors from internal contexts
We don't want to report errors on the internal contexts to userspace,
suppressing their own, so treat them as simulated errors. These mostly
arise inside selftests and so are simulated anyway. For the rest, we can
rely on the normal debug channels in CI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128113426.3711294-1-chris@chris-wilson.co.uk
Umesh Nerlige Ramappa [Fri, 24 Jan 2020 01:37:01 +0000 (17:37 -0800)]
drm/i915/perf: Fix OA context id overlap with idle context id
Engine context pinned in perf OA was set to same context id as
the idle context. Set the context id to an unused value.
Clear the sw context id field in lrc descriptor before ORing with
ce->tag (Chris)
Closes: https://gitlab.freedesktop.org/drm/intel/issues/756
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124013701.40609-1-umesh.nerlige.ramappa@intel.com
Chris Wilson [Mon, 27 Jan 2020 15:28:29 +0000 (15:28 +0000)]
drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutex
Similar to commit
ac0e331a628b ("drm/i915: Tighten atomicity of
i915_active_acquire vs i915_active_release") we have the same race of
trying to pin the context underneath a mutex while allowing the
decrement to be atomic outside of that mutex. This leads to the problem
where two threads may simultaneously try to pin the context and the
second not notice that they needed to repin the context.
<2> [198.669621] kernel BUG at drivers/gpu/drm/i915/gt/intel_timeline.c:387!
<4> [198.669703] invalid opcode: 0000 [#1] PREEMPT SMP PTI
<4> [198.669712] CPU: 0 PID: 1246 Comm: gem_exec_create Tainted: G U W 5.5.0-rc6-CI-CI_DRM_7755+ #1
<4> [198.669723] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017
<4> [198.669776] RIP: 0010:timeline_advance+0x7b/0xe0 [i915]
<4> [198.669785] Code: 00 48 c7 c2 10 f1 46 a0 48 c7 c7 70 1b 32 a0 e8 bb dd e7 e0 bf 01 00 00 00 e8 d1 af e7 e0 31 f6 bf 09 00 00 00 e8 35 ef d8 e0 <0f> 0b 48 c7 c1 48 fa 49 a0 ba 84 01 00 00 48 c7 c6 10 f1 46 a0 48
<4> [198.669803] RSP: 0018:
ffffc900004c3a38 EFLAGS:
00010296
<4> [198.669810] RAX:
ffff888270b35140 RBX:
ffff88826f32ee00 RCX:
0000000000000006
<4> [198.669818] RDX:
00000000000017c5 RSI:
0000000000000000 RDI:
0000000000000009
<4> [198.669826] RBP:
ffffc900004c3a64 R08:
0000000000000000 R09:
0000000000000000
<4> [198.669834] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88826f9b5980
<4> [198.669841] R13:
0000000000000cc0 R14:
ffffc900004c3dc0 R15:
ffff888253610068
<4> [198.669849] FS:
00007f63e663fe40(0000) GS:
ffff888276c00000(0000) knlGS:
0000000000000000
<4> [198.669857] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [198.669864] CR2:
00007f171f8e39a8 CR3:
000000026b1f6005 CR4:
00000000003606f0
<4> [198.669872] Call Trace:
<4> [198.669924] intel_timeline_get_seqno+0x12/0x40 [i915]
<4> [198.669977] __i915_request_create+0x76/0x5a0 [i915]
<4> [198.670024] i915_request_create+0x86/0x1c0 [i915]
<4> [198.670068] i915_gem_do_execbuffer+0xbf2/0x2500 [i915]
<4> [198.670082] ? __lock_acquire+0x460/0x15d0
<4> [198.670128] i915_gem_execbuffer2_ioctl+0x11f/0x470 [i915]
<4> [198.670171] ? i915_gem_execbuffer_ioctl+0x300/0x300 [i915]
<4> [198.670181] drm_ioctl_kernel+0xa7/0xf0
<4> [198.670188] drm_ioctl+0x2e1/0x390
<4> [198.670233] ? i915_gem_execbuffer_ioctl+0x300/0x300 [i915]
Fixes:
841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin")
References:
ac0e331a628b ("drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200127152829.2842149-1-chris@chris-wilson.co.uk
Chris Wilson [Sun, 26 Jan 2020 19:46:18 +0000 (19:46 +0000)]
drm/i915: Restore the kernel context after verifying the w/a
As a safety net, flush the engine verifications and restore the kernel
context.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/971
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126194618.2131078-1-chris@chris-wilson.co.uk
Jani Nikula [Fri, 24 Jan 2020 13:25:54 +0000 (15:25 +0200)]
drm/i915/vlv_dsi_pll: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a89bf4c8b312c233e6b219e9c73203608c3eaec.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:53 +0000 (15:25 +0200)]
drm/i915/vlv_dsi: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/436e4267529dc11cc7850d0a4f0703caa81b8c80.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:51 +0000 (15:25 +0200)]
drm/i915/vdsc: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/735389bfa1f9c4be8080f3187ea1dbde308d1ce2.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:49 +0000 (15:25 +0200)]
drm/i915/sprite: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/722f73a4529808ef7dad51c03c0a3775d8c5b052.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:47 +0000 (15:25 +0200)]
drm/i915/psr: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7865c858374e9ab04cf2bc4ceb3d7d89c27db83.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:46 +0000 (15:25 +0200)]
drm/i915/pipe_crc: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0af05f6035046a515097da398de8722c0ca23e56.1579871655.git.jani.nikula@intel.com
Ville Syrjälä [Thu, 23 Jan 2020 15:45:42 +0000 (17:45 +0200)]
drm/i915: Give aux channels a better name
The aux ch is used for more than DDC, so let's give it a better
name. For maximum ease let's include both the AUX ch identifier
and the port identifier (for cases where the VBT has redefined
the relationship of the two).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123154542.12271-3-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Ville Syrjälä [Thu, 23 Jan 2020 15:45:41 +0000 (17:45 +0200)]
drm/i915: Include the AUX CH name in the debug messages
To make it easier to figure out what caused a particular debug
message let's print out aux->name.
v2: Rebase for drm_err() & co.
Add some punctuation to the messages (Matt)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123154542.12271-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Chris Wilson [Sun, 26 Jan 2020 10:23:43 +0000 (10:23 +0000)]
drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release
As we use a mutex to serialise the first acquire (as it may be a lengthy
operation), but only an atomic decrement for the release, we have to
be careful in case a second thread races and completes both
acquire/release as the first finishes its acquire.
Thread A Thread B
i915_active_acquire i915_active_acquire
atomic_read() == 0 atomic_read() == 0
mutex_lock() mutex_lock()
atomic_read() == 0
ref->active();
atomic_inc()
mutex_unlock()
atomic_read() == 1
i915_active_release
atomic_dec_and_test() -> 0
ref->retire()
atomic_inc() -> 1
mutex_unlock()
So thread A has acquired the ref->active_count but since the ref was
still active at the time, it did not initialise it. By switching the
check inside the mutex to an atomic increment only if already active, we
close the race.
Fixes:
c9ad602feabe ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126102346.1877661-3-chris@chris-wilson.co.uk
Jani Nikula [Fri, 24 Jan 2020 13:25:52 +0000 (15:25 +0200)]
drm/i915/vga: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad357e65ddb85e7341416f0d7890661a3ef99298.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:50 +0000 (15:25 +0200)]
drm/i915/tv: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e6238e75f5a4155b1021736937b1fd7a0756a00.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:48 +0000 (15:25 +0200)]
drm/i915/sdvo: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b21dbc3c0f349345619590893c8ab96828c39103.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:45 +0000 (15:25 +0200)]
drm/i915/panel: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efd117ff0a63ef6ec1a4514f2ee133ca33b3f0a0.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:44 +0000 (15:25 +0200)]
drm/i915/overlay: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/03a907100bf86e877247df804104c50240e3b38c.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:43 +0000 (15:25 +0200)]
drm/i915/lvds: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/75c2aa6ff0f0aa744de006c0bd6e33fb91b20994.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:42 +0000 (15:25 +0200)]
drm/i915/lpe_audio: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d920b55fe225710169349db4819ca29af349e0b4.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:41 +0000 (15:25 +0200)]
drm/i915/hdmi: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c89e66aaca33a1e26fa1372172be41da0ee1c62f.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:39 +0000 (15:25 +0200)]
drm/i915/gmbus: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1fca6f7e201fb2c75fcfff213ebd982a988eb40d.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:38 +0000 (15:25 +0200)]
drm/i915/fifo_underrun: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fca7d63b3aa669b5984be45b5968f47fb0b64b2b.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:37 +0000 (15:25 +0200)]
drm/i915/fbc: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf67d57a7d760fb557325690f634799751d36f12.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:36 +0000 (15:25 +0200)]
drm/i915/dvo: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4898cb70cc12f54a3f5298c117ffc63b24b47d24.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:35 +0000 (15:25 +0200)]
drm/i915/dsb: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fc2a561318089b9c80111039b2623eb3ad40e6a6.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:34 +0000 (15:25 +0200)]
drm/i915/dp_mst: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/06ba99067fc506bec4533202b046d63dda5cb1f2.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:33 +0000 (15:25 +0200)]
drm/i915/dpll_mgr: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/11c589dc6bbbed34374568d9a501a9df2e35d6b3.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:32 +0000 (15:25 +0200)]
drm/i915/dpio_phy: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/40fe2f095a9ecd4c4a1564101a0e07cc77b9ddf9.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:27 +0000 (15:25 +0200)]
drm/i915/crt: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d66c0ea3abbed1ddb575e37da74b823b5085469a.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:25 +0000 (15:25 +0200)]
drm/i915/color: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80d2cac864eb3f964587e74fbb004940889a2928.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:24 +0000 (15:25 +0200)]
drm/i915/cdclk: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/762b11289d22e1db46697c5b4596e49defc8190f.1579871655.git.jani.nikula@intel.com
Jani Nikula [Fri, 24 Jan 2020 13:25:23 +0000 (15:25 +0200)]
drm/i915/audio: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
No functional changes.
Generated using the following semantic patch:
@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)
@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)
@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ca53d8a5ecd1045325447b728376c8aa2891905f.1579871655.git.jani.nikula@intel.com
Ville Syrjälä [Tue, 21 Jan 2020 17:10:50 +0000 (19:10 +0200)]
drm/i915: Prefer intel_connector over drm_connector in hotplug code
Replace the drm_connector loops with intel_connector loops to
streamline the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121171100.4370-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Wed, 22 Jan 2020 20:43:29 +0000 (22:43 +0200)]
drm/i915: Fix modeset locks in sanitize_watermarks()
We've added more internal things that use modeset locks and
thus we need to be prepared for intel_atomic_check() grabbing
more locks than what our initial drm_modeset_lock_all_ctx()
took. So we're missing the backoff handling here.
Also drm_atomic_helper_duplicate_state() works against us
by clearing state->acquire_ctx in anticipation of
drm_atomic_helper_commit_duplicated_state() being used to
commit the state.
We could probably just reset acquire_ctx back, but instead
let's just rewrite the whole thing without using either of
those "helpers". There's also no need to add any connectors
to the state here since we just want the new watermarks
which don't depend on connectors.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122204329.2477-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Stanislav Lisovskiy [Fri, 24 Jan 2020 17:23:01 +0000 (19:23 +0200)]
drm/i915: Fix inconsistance between pfit.enable and scaler freeing
Despite that during hw readout we seem to have scalers assigned
to pipes, then call atomic_setup_scalers, at the commit stage in
skl_update_scaler there is a check, that if we have fb src and
dest of same size, we stage freeing of that scaler.
However we don't update pfit.enabled flag then, which makes
the state inconsistent, which in turn triggers a WARN_ON
in skl_pfit_enable, because we have pfit enabled,
but no assigned scaler.
To me this looks weird that we kind of do the decision
to use or not use the scaler at skl_update_scaler stage
but not in intel_atomic_setup_scalers, moreover
not updating the whole state consistently.
This fix is to not free the scaler if we have pfit.enabled
flag set, so that the state is now consistent
and the warnings are gone.
v2: - Put pfit.enable check into crtc specific place
(Ville Syrjälä)
Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/577
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124172301.16484-1-stanislav.lisovskiy@intel.com
Chris Wilson [Fri, 24 Jan 2020 23:06:56 +0000 (23:06 +0000)]
drm/i915: Remove 'prefault_disable' modparam
The 'prefault_disable' modparam was used by IGT to prevent a few
prefaulting operations to make fault handling under struct_mutex more
prominent. With the removal of struct_mutex, this is not as important
any more and we have almost completely stopped using the parameter. The
remaining use in execbuf is now immaterial and can be dropped without
affecting coverage.
We must re-address the idea of fault injection though.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124230656.687503-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 24 Jan 2020 19:22:55 +0000 (19:22 +0000)]
drm/i915: Stub out i915_gpu_coredump_put
i915_gpu_coreddump_put is currently only defined if
CONFIG_DRM_I915_CAPTURE_ERROR is enabled, provide a stub otherwise.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Fixes:
742379c0c400 ("drm/i915: Start chopping up the GPU error capture")
Fixes:
748317386afb ("drm/i915/execlists: Offline error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mike Lothian <mike@fireburn.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124192255.541355-1-chris@chris-wilson.co.uk
Chris Wilson [Sun, 26 Jan 2020 19:56:54 +0000 (19:56 +0000)]
drm/i915/display: Squelch kerneldoc complaints
drivers/gpu/drm/i915/display/intel_atomic.c:185: warning: Function parameter or member 'state' not described in 'intel_connector_needs_modeset'
drivers/gpu/drm/i915/display/intel_atomic.c:185: warning: Function parameter or member 'connector' not described in 'intel_connector_needs_modeset'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Function parameter or member 'state' not described in 'intel_fbc_enable'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Excess function parameter 'crtc_state' description in 'intel_fbc_enable'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Excess function parameter 'plane_state' description in 'intel_fbc_enable'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126195654.2172937-1-chris@chris-wilson.co.uk
Vandita Kulkarni [Fri, 24 Jan 2020 12:58:29 +0000 (18:28 +0530)]
drm/i915/bios: Fix the timing parameters
Fix htotal and vtotal parameters derived from DTD block of VBT. The
values miss the back porch.
Fixes:
33ef6d4fd8df ("drm/i915/vbt: Handle generic DTD block")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124125829.16973-1-vandita.kulkarni@intel.com
Wambui Karuga [Wed, 22 Jan 2020 12:57:50 +0000 (15:57 +0300)]
drm/i915/gem: manual conversion to struct drm_device logging macros.
Convert most of the remaining uses of the printk based logging macros to
the new struct drm_device based logging macros in drm/i915/gem.
This also involves extracting the struct drm_i915_private device
from various types, and using it in the various macros.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122125750.9737-3-wambui.karugax@gmail.com
Wambui Karuga [Wed, 22 Jan 2020 12:57:49 +0000 (15:57 +0300)]
drm/i915/gem: initial conversion to new logging macros using coccinelle
First pass of conversion to the new struct drm_based device logging
macros in the drm/i915/gem directory. This conversion was achieved using
the following coccinelle script that transforms based on the existence
of a straightforward struct drm_i915_private device:
@rule1@
identifier fn, T;
@@
fn(struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@rule2@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were addressed manually.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122125750.9737-2-wambui.karugax@gmail.com
Jani Nikula [Thu, 23 Jan 2020 14:00:04 +0000 (16:00 +0200)]
drm/i915/pm: use intel de functions for forcewake register access
Move away from I915_READ_FW() and I915_WRITE_FW() in display code, and
switch to using intel_de_read_fw() and intel_de_write_fw(),
respectively.
No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123140004.14136-6-jani.nikula@intel.com
Jani Nikula [Thu, 23 Jan 2020 14:00:01 +0000 (16:00 +0200)]
drm/i915/irq: use intel de functions for forcewake register access
Move away from I915_READ_FW() and I915_WRITE_FW() in display code, and
switch to using intel_de_read_fw() and intel_de_write_fw(),
respectively.
No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123140004.14136-3-jani.nikula@intel.com
Jani Nikula [Thu, 23 Jan 2020 13:59:59 +0000 (15:59 +0200)]
drm/i915/dmc: use intel uncore functions for forcewake register access
Move away from I915_READ_FW() and I915_WRITE_FW() and switch to using
intel_uncore_read_fw() and intel_uncore_write_fw(), respectively.
No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123140004.14136-1-jani.nikula@intel.com
Wambui Karuga [Wed, 22 Jan 2020 11:08:44 +0000 (14:08 +0300)]
drm/i915/hdcp: conversion to struct drm_device based logging macros.
Converts various instances of the printk based logging macros in
i915/display/intel_hdcp.c with the struct drm_device based macros using
coccinelle. The script matches based on the existence of an existing
struct drm_i915_private device:
@rule1@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@rule2@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
New checkpatch warnings were addressed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122110844.2022-7-wambui.karugax@gmail.com
Wambui Karuga [Wed, 22 Jan 2020 11:08:43 +0000 (14:08 +0300)]
drm/i915/opregion: conversion to struct drm_device logging macros.
This converts various instances of the printk based logging macros in
i915/display/intel_opregion.c with the new struct drm_device based
logging macros using the following coccinelle script:
@rule1@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@rule2@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were addressed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122110844.2022-6-wambui.karugax@gmail.com
Wambui Karuga [Wed, 22 Jan 2020 11:08:42 +0000 (14:08 +0300)]
drm/i915/dp: conversion to struct drm_device logging macros.
This converts various instances of printk based logging macros in
i915/display/intel_dp.c with the new struct drm_device based logging
macros using the following coccinelle script:
@rule1@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@rule2@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
New checkpatch warnings were fixed manually.
v2: fix merge conflict with new changes in file.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122110844.2022-5-wambui.karugax@gmail.com
Wambui Karuga [Wed, 22 Jan 2020 11:08:41 +0000 (14:08 +0300)]
drm/i915/power: convert to struct drm_device macros in display/intel_display_power.c
Converts various instances of the printk based logging macros in
i915/display/intel_display_power.c to the struct drm_device based
logging macros using the following coccinelle script:
@rule1@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@rule2@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were fixed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122110844.2022-4-wambui.karugax@gmail.com
Wambui Karuga [Wed, 22 Jan 2020 11:08:39 +0000 (14:08 +0300)]
drm/i915/dsi: conversion to struct drm_device log macros.
This converts the more straightforward instances of the printk based
logging macros with the struct drm_device based logging macros.
This transformation was achieved using coccinelle and the following
script for matching an existing struct drm_i915_private device:
@rule1@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@rule2@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
New checkpatch warnings were fixed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122110844.2022-2-wambui.karugax@gmail.com
Wambui Karuga [Tue, 21 Jan 2020 21:46:41 +0000 (00:46 +0300)]
drm/i915/display: conversion to new struct drm_device logging macros.
This patch converts various instances of the printk based logging macros
in drm/i915/display/intel_display.c to the new struct drm_device based
logging macros.
In some instances, this involves extracting the struct drm_i915_private
device from various intel types and using it in the macros.
v2: use correct variable name in assignment over variable type.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121214641.7262-1-wambui.karugax@gmail.com
Michal Wajdeczko [Mon, 20 Jan 2020 19:18:17 +0000 (19:18 +0000)]
drm/i915/guc: Don't GEM_BUG_ON on corrupted H2G CTB
We should never BUG_ON on any corruption in CTB descriptor as
data there can be also modified by the GuC. Instead we can
use flag "is_in_error" to indicate that we will not process
any further messages over this CTB (until reset).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120191817.50164-1-michal.wajdeczko@intel.com
Chris Wilson [Thu, 23 Jan 2020 13:56:04 +0000 (13:56 +0000)]
drm/i915/tgl: Re-enable RPS
We disabled rps while it appeared to be a contributing factor to system
instablity, as that is now resolved, re-enable RPS and see how we fare.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135604.1402572-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 24 Jan 2020 11:51:33 +0000 (11:51 +0000)]
drm/i915/gt: Poison GTT scratch pages
Using a clear page for scratch means that we have relatively benign
errors in case it is accidentally used, but that can be rather too
benign for debugging. If we poison the scratch, ideally it quickly
results in an obvious error.
v2: Set each page individually just in case we are using highmem for our
scratch page.
v3: Pick a new scratch register as MI_STORE_REGISTER_MEM does not work
with GPR0 on gen7, unbelievably.
v4: Haswell still considers 3DPRIM a privileged register!
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124115133.53360-1-chris@chris-wilson.co.uk