Kyungmin Park [Fri, 21 Aug 2009 04:03:33 +0000 (13:03 +0900)]
s5pc110: Pass correct HW revision number
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 21 Aug 2009 00:06:19 +0000 (09:06 +0900)]
s5pc110: universal: Use samsung-onenand drivers
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 21 Aug 2009 00:01:23 +0000 (09:01 +0900)]
s5pc100: smdkc100: Use rootfs name for UBI rootfs
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Thu, 20 Aug 2009 06:49:20 +0000 (15:49 +0900)]
smdkc100: set boot delay 3
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Thu, 20 Aug 2009 05:23:49 +0000 (14:23 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Conflicts:
cpu/arm_cortexa8/config.mk
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Byungho Min [Thu, 20 Aug 2009 04:47:58 +0000 (13:47 +0900)]
s5pc110: modem: moving modem booting sourcecode to board directory
Byungho Min [Wed, 19 Aug 2009 10:07:22 +0000 (19:07 +0900)]
s5pc100: modem: infineon PSI loading
Wolfgang Denk [Tue, 18 Aug 2009 11:57:04 +0000 (13:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Tue, 18 Aug 2009 11:53:54 +0000 (13:53 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Albin Tonnerre [Wed, 22 Jul 2009 16:30:03 +0000 (18:30 +0200)]
Update the mtd driver name in bootargs for at91-based boards
The name of the atmel nand driver in the kernel changed from at91_nand
to atmel_nand back in June 2008, but the at91-based boards config files
still refer to at91_nand. This patch updates them with the new name
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Ben Goska [Fri, 14 Aug 2009 17:03:36 +0000 (10:03 -0700)]
omap3: Fixed a problem with hwecc
In commit
187af954cf7958c24efcf0fd62289bbdb4f1f24e there
was a typo that offset all the ecc registers by 4 bytes, fixed that.
Signed-off-by: Ben Goska <goskab@onid.oregonstate.edu>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
Stefan Roese [Mon, 17 Aug 2009 14:57:53 +0000 (16:57 +0200)]
ppc4xx: Fix "chip_config" command for AMCC Arches
This patch fixes the "chip_config" command for I2C bootstrap EEPROM
configuration. First it changes the I2C bootstrap EEPROM address to
0x54 as this is used on Arches (instead of 0x52 on Canyonlands/
Glacier). Additionally, the NAND bootstrap settings are removed
for Arches since Arches doesn't support NAND-booting.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 16 Aug 2009 21:40:13 +0000 (23:40 +0200)]
Monahans: avoid floating point calculations
Current code for the Monahans CPU defined OSCR_CLK_FREQ as 3.250 (MHz)
which caused floating point operations to be used. This resulted in
unresolved references to some FP related libgcc functions when using
U-Boot's private libgcc functions.
Change the code to use fixed point math only.
Signed-off-by: Wolfgang Denk <wd@denx.de>
daeinki [Mon, 17 Aug 2009 08:48:28 +0000 (17:48 +0900)]
s5pc110: fb: code clean.
Signed-off-by: daeinki <inki.dae@samsung.com>
Kumar Gala [Fri, 14 Aug 2009 21:43:22 +0000 (16:43 -0500)]
85xx: Fix addrmap to include memory
When we init the addrmap based on the TLB we will not end up getting
the TLB that covers memory if we are using SPD. The reason is we
haven't relocated at the point that we setup the memory TLB and thus it
will not get setup in the addrmap.
Instead we can just walk over the TLB array after we've relocated and
see all the TLBs that have been set and use that information to populate
the initial addrmap. By doing this we insure that we get the TLB
entries that cover memory.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
John Schmoller [Wed, 12 Aug 2009 15:55:47 +0000 (10:55 -0500)]
flash: Fix CFI buffer size bug
Fix bug introduced by
9c048b523413ae5f3ff34e00cf57569c3368ab51.
The cfi_flash.c driver cast the flash buffer size to a uchar in
flash_write_cfibuffer(). On some flash parts, (tested on Numonyx
part PC32F512M29EWH), the buffer size is 1KB. Remove the cast to
uchar to enable buffer sizes to be larger.
Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Thu, 13 Aug 2009 04:32:14 +0000 (00:32 -0400)]
trab: rename spi_init()
The local board-specific spi_init() function conflicts with the common SPI
layer, so rename it to something board-specific.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Giuseppe CONDORELLI [Wed, 29 Jul 2009 10:05:20 +0000 (06:05 -0400)]
zlib: add watchdog reset call
This patch adds watchdog reset call to allow its invokation during decompression
phase. This control was present on old zlib version and here it is
backported for those relevant routines. This patch is sent as a zlib separate
one beacuse it was not tested due to specific board lack.
zlib patches will be unified just in one when this will be validated through
tests.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Giuseppe CONDORELLI [Wed, 29 Jul 2009 12:05:08 +0000 (08:05 -0400)]
zlib: updated to v.1.2.3
This patch updates zlib to the latest stable version.
Only relevant zlib parts were ported to u-boot tree, as already did for the
current zlib (0.95). New zlib guarantees a faster inflate performances
other then others improvements as explained at www.zlib.net.
It also includes Alessandro Rubini's patches to allow 0 as destination pointer
and to call watchdog reset if required by architecture.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Reviewed-by: Angelo Castello <angelo.castello@st.com>
Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com>
Heiko Schocher [Tue, 11 Aug 2009 08:37:58 +0000 (10:37 +0200)]
dtt, lm81: move unneccessary printf into a debug printf
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Tue, 11 Aug 2009 19:49:15 +0000 (21:49 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Tue, 11 Aug 2009 19:47:42 +0000 (21:47 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-video
Wolfgang Denk [Tue, 11 Aug 2009 19:44:55 +0000 (21:44 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Mark Jackson [Tue, 11 Aug 2009 10:33:47 +0000 (11:33 +0100)]
MIMC200: reduce LCD pixclock
The initial pixclock for the MIMC200 board is wrong (and causes
screen corruption due to DMA underruns).
This patch simply reduces the pixel clock to fix the problem.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Kyungmin Park [Tue, 11 Aug 2009 08:30:04 +0000 (17:30 +0900)]
s5pc110: TickerTape: Handle detect board veriants
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 11 Aug 2009 08:22:26 +0000 (17:22 +0900)]
s5pc110: TickerTape: Distinguish tickertape from universal
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 11 Aug 2009 07:54:09 +0000 (16:54 +0900)]
s5pc110: universal: Auto USB download support by keypad
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Richard Retanubun [Wed, 1 Jul 2009 18:04:05 +0000 (14:04 -0400)]
UEC FIXED PHY: Determine fixed-phy port using UEC interface name.
Fixed a misunderstanding in the original implementation, 'devnum' that
was used in the cpu/ppc4xx/4xx_enet.c implementation was NOT the
PHY's SMI address, rather it was the number of the MAC interface on
the CPU. The equivalent of this for uec_phy will be the UEC number
stored in mii_info->dev->name. Usage example is updated for uec.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Richard Retanubun [Wed, 1 Jul 2009 18:03:15 +0000 (14:03 -0400)]
Assigned a static SMI address to all UECs TBIPA address.
It is set to 0x1F by default and can be overwritten on the board
header file by defining CONFIG_UTBIPAR_INIT_TBIPA. This allows
the CPU to simply "reserve" one SMI address instead of using
a different one for each UEC.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Prafulla Wadaskar [Mon, 10 Aug 2009 14:13:06 +0000 (19:43 +0530)]
net: kirkwood: updates: used eth_setenv_enetaddr api
eth_setenv_enetaddr is avaible by upper layer
using this saves 204 bytes on total image size
used Local OUI instead of Marvell OUI for
random MAC address generation logic
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Roy Zang [Mon, 10 Aug 2009 19:48:05 +0000 (03:48 +0800)]
Fix E1000 build warning on AP1000 board
Fix E1000 build warning on AP1000 board
Fix the build warning on AP1000 board:
e1000.c:131: warning: 'e1000_read_eeprom' used but never defined
e1000.c:2012: warning: 'e1000_set_phy_mode' defined but not used
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Sandeep Paulraj [Mon, 10 Aug 2009 16:24:40 +0000 (12:24 -0400)]
ARM: Davinci DM355: Enabling DM9000 on DM355 EVM
Due to recent changes to the NET support on U-boot, DM9000
is no longer detected on the DM355 EVM.
This minor update enables DM9000 on the DM355 EVM.
Tested on the DM355 EVM
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Prafulla Wadaskar [Mon, 10 Aug 2009 13:53:19 +0000 (19:23 +0530)]
net: phy: bugfixes: mv88E61xx compiler warnings fixed
1. mv88E61xx driver compiler warnings fixed
2. idstr if-else statements changed to switch() construct
and added default case too.
This fixed idstr may be uninitialized warning
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Po-Yu Chuang [Mon, 10 Aug 2009 03:00:00 +0000 (11:00 +0800)]
arm: A320: driver for FTMAC100 ethernet controller
This patch adds an FTMAC100 ethernet driver for Faraday A320 evaluation board.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Kumar Gala [Mon, 10 Aug 2009 21:40:55 +0000 (16:40 -0500)]
85xx: Removed BEDBUG support from FSL 85xx boards
For some reason the MPC8544 enabled BEDBUG if PCI was enabled and that
got copied int the MPC8536, MPC8572 and P2020 DS boards. The BEDBUG
support has never been made to work completely on e500/85xx so we
just disable it to save space and match the other FSL 85xx boards.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Mon, 10 Aug 2009 08:39:12 +0000 (10:39 +0200)]
Prepare 2009.08-rc2
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 10 Aug 2009 08:38:34 +0000 (10:38 +0200)]
Minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 10 Aug 2009 07:59:10 +0000 (09:59 +0200)]
net/tftp.c: fix warning: pointer targets differ in signedness
tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen'
differ in signedness
This was only visible for the utx8245 board which seems to have DEBUG
enabled.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Dirk Behme [Sat, 8 Aug 2009 14:06:47 +0000 (16:06 +0200)]
ARM Cortex A8: Remove bogus config.mk entries
Remove bogus config.mk entry, fix newline and remove redundant
omap3/config.mk
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Dirk Behme [Sat, 8 Aug 2009 10:46:09 +0000 (12:46 +0200)]
OMAP3: Fix missing GPMC_CONFIG_CS0_BASE
Applying two indepenent OMAP3 patches resulted in missing
GPMC_CONFIG_CS0_BASE. Patch "omap3: embedd gpmc_cs into gpmc
config struct" removes GPMC_CONFIG_CS0_BASE, independent patch
"omap3: bug fix for NOR boot support" introduces it's usage.
Re-introduce GPMC_CONFIG_CS0_BASE.
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Ilya Yanok [Mon, 8 Jun 2009 00:12:49 +0000 (04:12 +0400)]
mxc-mmc: sdhc host driver for MX2 and MX3 proccessor
This is a port of Linux driver for SDHC host controller hardware
found on Freescale's MX2 and MX3 processors. Uses new generic MMC
framework (CONFIG_GENERIC_MMC) and it looks like there are some
problems with a framework (at least on LE cpus). Some of these
problems are addressed in the following patches.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Alessandro Rubini [Fri, 7 Aug 2009 10:35:47 +0000 (12:35 +0200)]
kirkwood/gpio.h: remove duplicate definition
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Albin Tonnerre [Fri, 7 Aug 2009 10:37:36 +0000 (12:37 +0200)]
Add driver for the ST M95xxx SPI EEPROM
This chip is used in a number of boards manufactured by Calao-Systems
which should be supported soon. This driver provides the necessary
spi_read and spi_write functions necessary to communicate with the chip.
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Prafulla Wadaskar [Fri, 7 Aug 2009 16:57:32 +0000 (22:27 +0530)]
arm: Sheevaplug: Fixed NAND specific warning
It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
for NAND specific warning removal, same is done in this patch
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Josh Boyer [Fri, 7 Aug 2009 17:53:20 +0000 (13:53 -0400)]
Dual-license IBM code contributions
It was brought to our attention that U-Boot contains code derived from the
IBM OpenBIOS source code originally provided with some of the older PowerPC
4xx development boards. As a result, the original license of this code has
been carried in the various files for a number of years in the U-Boot project.
IBM is dual-licensing the IBM code contributions already present in U-Boot
under either the terms of the GNU General Public License version 2, or the
original code license already present.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Kumar Gala [Wed, 5 Aug 2009 14:03:54 +0000 (09:03 -0500)]
fdt: Fix fdt_pci_dma_ranges handling of 64-bit ranges
If the size of a region equal to 4G it can't be represnted in a 32-bit
BAR so we should have marked that case as MEM64.
Additionally bump the number of inbound windows up to 4 to handle the
fact that Freescale PPCs that have an implicit window for CCSRBAR.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Thu, 6 Aug 2009 19:29:59 +0000 (21:29 +0200)]
ARM EABI: add new helper functions resp. function names
The ARM EABI defines new names for GCC helper functions,
and GCC seems to need some new functions as well.
This patch is a minimal-invasive approach to fix problems with EABI
conformant tool chains (to be used with "USE_PRIVATE_LIBGCC=yes").
Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Dirk Behme <dirk.behme@googlemail.com>
Peter Tyser [Wed, 5 Aug 2009 21:18:44 +0000 (16:18 -0500)]
hush: Fix bogus free() call
An off-by-one error in hush.c resulted in an unintentional free() call
every time a command was executed
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Detlev Zundel [Wed, 5 Aug 2009 16:37:45 +0000 (18:37 +0200)]
digsy_mtc: Update default environment
Signed-off-by: Detlev Zundel <dzu@denx.de>
Detlev Zundel [Wed, 5 Aug 2009 16:37:44 +0000 (18:37 +0200)]
digsy_mtc: Add delay in SPI transfers to the companion controller.
While at it, remove initialization of variables which will be set
before usage in all cases.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Anatolij Gustschin [Wed, 5 Aug 2009 16:37:43 +0000 (18:37 +0200)]
digsy_mtc: minor fixes for mtc command help
Add mtc state subcommand description to the
help of mtc command.
Remove some newlines in description of commands
for proper help formating.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Grzegorz Bernacki [Wed, 5 Aug 2009 16:37:42 +0000 (18:37 +0200)]
digsy_mtc: Add mtc state command.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Wolfgang Denk [Tue, 28 Jul 2009 20:35:39 +0000 (22:35 +0200)]
Partition support: remove newline from partition name
Remove bogus newline character that got added to the .name field of
the disk_partition_t structure.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Luigi 'Comio' Mantellini [Tue, 28 Jul 2009 07:33:17 +0000 (09:33 +0200)]
Fix LZMA string.h header inclusion issue and remove unused variables.
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Jens Scharsig [Mon, 27 Jul 2009 13:28:42 +0000 (15:28 +0200)]
bus_vcxk.c: fix warning: unused variable 'lineptr'
Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
Mike Frysinger [Fri, 24 Jul 2009 21:51:27 +0000 (17:51 -0400)]
env: kill off default_environment_size
The only environment type that uses this variable is spi flash, and that is
only because it is reimplementing the common set_default_env() function.
So fix the spi flash code and kill off the default_environment_size in the
process.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 23 Jul 2009 20:37:48 +0000 (16:37 -0400)]
export SPI functions to standalone apps
While we're here, fix the broken #ifdef handling in _exports.h.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Sat, 8 Aug 2009 10:08:09 +0000 (12:08 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Penda Naveen Kumar [Thu, 30 Jul 2009 18:36:36 +0000 (00:06 +0530)]
omap3: bug fix for NOR boot support
This patch provides bug fix, when omap3 uses nor boot.
Signed-off-by: Penda Naveen Kumar<pnaveen@ti.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
Michael Evans [Mon, 13 Jul 2009 19:13:45 +0000 (20:13 +0100)]
Fix examples for OMAP3 boards...
The attached patch corrects an error in the examples/Makefile which
causes the applications in the examples directory to hang on OMAP3
based boards. The current Makefile sets -Ttext during linking to
0x0c100000 which is outside of addressable SDRAM memory. The script
corrects the existing ifeq...else...endif logic to look at the VENDOR
tag rather than the CPU tag.
The patch affects the following configs: omap3_beagle_config,
omap3_overo_config, omap3_evm_config, omap3_pandora_config,
omap3_zoom1_config and omap3_zoom2_config.
Signed-off-by: Michael Evans <horse_dung@hotmail.com>
Edited commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Dirk Behme [Sat, 8 Aug 2009 07:30:23 +0000 (09:30 +0200)]
omap3: use only fixed-size types inside ctrl_structs
replace variable types in ctrl_structs for omap3 by those with
fixed size (u8, u16, u32).
Additional ifndef-protection is needed by examples which do not
compile when including asm/types.h
Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Dirk Behme [Sat, 8 Aug 2009 07:30:22 +0000 (09:30 +0200)]
omap3: replace all instances of gpmc config struct by one global
Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Dirk Behme [Sat, 8 Aug 2009 07:30:21 +0000 (09:30 +0200)]
omap3: remove typedefs for configuration structs
Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Roy Zang [Fri, 31 Jul 2009 05:34:02 +0000 (13:34 +0800)]
Add Intel E1000 PCIE card support
Based on Intel PRO/1000 Network Driver 7.3.20-k2
Add Intel E1000 PCIE card support. The following cards are added:
INTEL_82571EB_COPPER
INTEL_82571EB_FIBER,
INTEL_82571EB_SERDES
INTEL_82571EB_QUAD_COPPER
INTEL_82571PT_QUAD_COPPER
INTEL_82571EB_QUAD_FIBER
INTEL_82571EB_QUAD_COPPER_LOWPROFILE
INTEL_82571EB_SERDES_DUAL
INTEL_82571EB_SERDES_QUAD
INTEL_82572EI_COPPER
INTEL_82572EI_FIBER
INTEL_82572EI_SERDES
INTEL_82572EI
INTEL_82573E
INTEL_82573E_IAMT
INTEL_82573L
INTEL_82546GB_QUAD_COPPER_KSP3
INTEL_80003ES2LAN_COPPER_DPT
INTEL_80003ES2LAN_SERDES_DPT
INTEL_80003ES2LAN_COPPER_SPT
INTEL_80003ES2LAN_SERDES_SPT
82571EB_COPPER dual ports,
82572EI single port,
82572EI_COPPER single port PCIE cards
and
82545EM_COPPER,
82541GI_LF
pci cards are tested on both P2020 board
and MPC8544DS board.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Thu, 16 Jul 2009 01:31:28 +0000 (21:31 -0400)]
net: sync env ethaddr to device enetaddr in eth_init()
In the previous enetaddr refactoring, the assumption with commit
56b555a644
was that the eth layer would handle the env -> device enetaddr syncing.
This was not the case as eth_initialize() is called only once and the sync
occurs there. So make sure the eth_init() function does the env -> device
sync with every network init.
Reported-by: Andrzej Wolski <awolski@poczta.fm>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Robin Getz [Thu, 23 Jul 2009 07:01:03 +0000 (03:01 -0400)]
minor debug cleanups in ./net
Minor ./net cleanups - no functional changes
- change #ifdef DEBUG printf(); #endif to just debug()
- changed __FUNCTION__ to __func__
- got rid of extra whitespace between function and opening brace
- removed unnecessary braces on if statements
gcc dead code elimination should make this functionally/size equivalent
when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3).
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Matthias Ludwig [Tue, 19 May 2009 07:09:31 +0000 (09:09 +0200)]
omap3: embedd gpmc_cs into gpmc config struct
Embedd chip select configuration into struct for gpmc config
instead of having it completely separated as suggested by
Wolfgang Denk on
http://lists.denx.de/pipermail/u-boot/2009-May/052247.html
Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
Kyungmin Park [Fri, 7 Aug 2009 10:00:33 +0000 (19:00 +0900)]
s5pc110: universal: Enable TSP_LDO to power up I2C2
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 7 Aug 2009 09:52:42 +0000 (18:52 +0900)]
s5pc110: Fix wrong GPG3CON offset
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Fri, 7 Aug 2009 08:46:22 +0000 (17:46 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Fri, 7 Aug 2009 08:45:44 +0000 (17:45 +0900)]
smdkc100: change the base address from 0x20000000 to 0x30000000
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Joonyoung Shim [Fri, 7 Aug 2009 07:55:39 +0000 (16:55 +0900)]
s5pc1xx: universal: modify init TZPC
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Joonyoung Shim [Fri, 7 Aug 2009 07:51:17 +0000 (16:51 +0900)]
s5pc100: SMDKC100: rename from dma to tzpc
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Joonyoung Shim [Fri, 7 Aug 2009 07:49:26 +0000 (16:49 +0900)]
s5pc1xx: universal: modify init TZPC
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Kyungmin Park [Fri, 7 Aug 2009 04:49:47 +0000 (13:49 +0900)]
s5pc1xx: Use system ram base as 0x3000'0000 instead of 0x2000'0000
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 7 Aug 2009 04:10:40 +0000 (13:10 +0900)]
s5pc100: universal: Fix CS1 memory configuration
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 6 Aug 2009 09:08:11 +0000 (18:08 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Thu, 6 Aug 2009 09:08:08 +0000 (18:08 +0900)]
s5pc110: universal: Add nfs configuration
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Thu, 6 Aug 2009 05:55:08 +0000 (14:55 +0900)]
s5pc100: smdkc100: build fix
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Thu, 6 Aug 2009 04:48:40 +0000 (13:48 +0900)]
OneNAND: code cleanup and sync with mainline
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 6 Aug 2009 04:46:40 +0000 (13:46 +0900)]
USB: Fix compiler warning because of wrong cast
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 6 Aug 2009 04:46:07 +0000 (13:46 +0900)]
OneNAND: Use write_oob instead of write
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 6 Aug 2009 04:45:21 +0000 (13:45 +0900)]
OneNAND: Fix ECC error since dummy write because of not enough ffchars
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 6 Aug 2009 00:53:45 +0000 (09:53 +0900)]
OneNAND: Partial write support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Tue, 4 Aug 2009 19:54:11 +0000 (21:54 +0200)]
Merge branch 'next' of git://git.denx.de/u-boot-coldfire
Kyungmin Park [Tue, 4 Aug 2009 06:00:24 +0000 (15:00 +0900)]
s5pc100: universal: Clear the auto-burn magic value after set
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
David Brownell [Fri, 17 Jul 2009 01:40:55 +0000 (18:40 -0700)]
rm9200 lowevel_init: don't touch reserved/readonly registers
For some reason the AT91rm9200 lowlevel init writes to a bunch of
reserved or read-only addresses. All the boards seem to define the
value-to-be-written values as zero ... but they shouldn't actually
be writing *anything* there.
No documented erratum justifies these accesses. It looks like maybe
some pre-release BDI-2000 setup code has been carried along by cargo
cult programming since at least late 2004 (per GIT history).
Here's a patch disabling what seems to be bogosity. Tested on a
csb337; there were no behavioral changes.
Signed-off-by: David Brownell <david-b@pacbell.net>
on RM9200ek
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
daeinki [Mon, 3 Aug 2009 07:09:00 +0000 (16:09 +0900)]
s5pc110: fb: Code clean for Dual LCD.
Signed-off-by: daeinki <inki.dae@samsung.com>
daeinki [Mon, 3 Aug 2009 07:07:30 +0000 (16:07 +0900)]
Merge branch 'master' of daeinki@10.89.8.158:/pub/git/u-boot-s5pc1xx
daeinki [Mon, 3 Aug 2009 07:06:51 +0000 (16:06 +0900)]
s5pc110: fb: Code clean for single LCD.
Signed-off-by: daeinki <inki.dae@samsung.com>
daeinki [Mon, 3 Aug 2009 06:58:11 +0000 (15:58 +0900)]
s5pc110: gpio: Added and modified MACRO.
Signed-off-by: daeinki <inki.dae@samsung.com>
Kyungmin Park [Mon, 3 Aug 2009 06:44:54 +0000 (15:44 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Mon, 3 Aug 2009 06:44:51 +0000 (15:44 +0900)]
s5pc100: OneNAND: Don't allow subpage write
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 3 Aug 2009 04:38:23 +0000 (13:38 +0900)]
OneNAND: Fix wrong ORing at runtime badblock check
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 3 Aug 2009 03:08:11 +0000 (12:08 +0900)]
UBI: export do_ubi for USB downaloder
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 3 Aug 2009 02:41:43 +0000 (11:41 +0900)]
s5pc110: universal: OneNAND command line partition support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
David Hunter [Thu, 30 Jul 2009 21:32:49 +0000 (14:32 -0700)]
pxa: Fix typo in GCDR(x)
Fix a typo in the GCDR(x) macro. It's a good thing no one was using it.
Signed-off-by: David Hunter <hunterd42@gmail.com>
Eric Benard [Sat, 18 Jul 2009 21:45:15 +0000 (23:45 +0200)]
Add AT91SAM9260 to at91's lowlevel_init.S
Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260.
Signed-off-by: Eric Benard <eric@eukrea.com>
daeinki [Sat, 1 Aug 2009 06:02:30 +0000 (15:02 +0900)]
s5pc110: fb: code clean.
Signed-off-by: daeinki <inki.dae@samsung.com>
daeinki [Fri, 31 Jul 2009 13:38:12 +0000 (22:38 +0900)]
s5pc110: fb: Modified TL2796 Driver for Dual LCD.
Signed-off-by: daeinki <inki.dae@samsung.com>