* Makefile.in (mips-linux-tdep.o) Add $(solib_h) dependency.
(nto-procfs.o): Likewise.
* mips-linux-tdep.c: Include "solib.h".
* nto-procfs.c: Likewise.
* config/nm-linux.h: Do not include "solib.h".
* config/nm-nbsd.h: Likewise.
* config/tm-linux.h: Likewise.
* config/alpha/nm-osf.h: Likewise.
* config/frv/tm-frv.h: Likewise.
* config/i386/nm-fbsh.h: Likewise.
* config/i386/nm-i386gnu.h: Likewise.
* config/i386/nm-i386sco5.h: Likewise.
* config/i386/nm-i386sol2.h: Likewise.
* config/i386/nm-i386v4.h: Likewise.
* config/i386/nm-i386v42mp.h: Likewise.
* config/i386/tm-i386sol2.h: Likewise.
* config/i386/tm-nto.h: Likewise.
* config/mips/nm-irix5.h: Likewise.
* config/mips/tm-nbsd.h: Likewise.
* config/pa/tm-hppah.h: Likewise.
* config/powerpc/tm-ppc-eabi.h: Likewise.
* config/rs6000/tm-rs6000.h: Likewise.
* config/sh/tm-nbsd.h: Likewise.
* config/sparc/nm-sol2.h: Likewise.
* config/sparc/tm-sol2.h: Likewise.
* config/arm/nbsdaout.mh: Remove NAT_FILE.
* config/i386/nbsdaout.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/obsdaout.mh: Likewise.
* config/m68k/nbsdaout.mh: Likewise.
* config/m68k/obsd.mh: Likewise.
* config/sparc/nbsdaout.mh: Likewise.
* config/cris/cris.mt: Remove DEPRECATED_TM_FILE.
* config/i386/linux64.mt: Likewise.
* config/m68k/linux.mt: Likewise.
* config/m68k/nbsd.mt: Likewise.
* config/sparc/linux.mt: Likewise.
* config/sparc/linux64.mt: Likewise.
* config/vax/nbsd.mt: Likewise.

* config/tc-spu.c (md_pseudo_table): Add eqv and .eqv.

*** empty log message ***

daily update

* ld-elf/warn2.d: Match regex also for the second segment.

*** empty log message ***

daily update

* NEWS: New port to Cell Broadband Engine SPU.
* MAINTAINERS: Add myself as spu maintainer.

gdb/
* Makefile.in (arm-tdep.o): Update dependencies.
* arm-tdep.c (thumb_skip_prologue): Remove.
(thumb_analyze_prologue): New function.
(arm_skip_prologue): Use thumb_analyze_prologue.
(thumb_scan_prologue): Ditto.
gdb/testsuite/
* gdb.arch/thumb-prologue.c, gdb.arch/thumb-prologue.exp: New files.

opcodes/
* arm-dis.c (last_is_thumb): Delete.
(enum map_type, last_type): New.
(print_insn_data): New.
(get_sym_code_type): Take MAP_TYPE argument.  Check the type of
the right symbol.  Handle $d.
(print_insn): Check for mapping symbols even without a normal
symbol.  Adjust searching.  If $d is found see how much data
to print.  Handle data.
gas/
* config/tc-arm.h (md_cons_align): Define.
(mapping_state): New prototype.
* config/tc-arm.c (mapping_state): Make global.
gas/testsuite/
* gas/arm/arm7t.d, gas/arm/neon-ldst-rm.d, gas/arm/thumb2_pool.d,
gas/arm/tls.d: Update for $d support.
* gas/arm/mapshort.d, gas/arm/mapshort.s: New test.
* gas/elf/section2.e-armeabi: Update.
* gas/elf/section2.e-armelf: New file.
* gas/elf/elf.exp: Use it.
ld/testsuite/
* ld-arm/mixed-app.d, ld-arm/tls-app.d, ld-arm/tls-lib.d: Update
for $d support.

ChangeLog:

* configure.tgt: Enable gdbserver for SPU target.
* configure.ac: Build gdbserver when gdb_native is yes.
* configure: Regenerate.
* regformats/reg-spu.dat: New file.

gdbserver/ChangeLog:

* configure.srv: Add target "spu*-*-*".
* Makefile.in (clean): Remove reg-spu.c.
(reg-spu.c, reg-spu.o, spu-low.o): Add dependencies.
* spu-low.c: New file.

* osabi.c (gdbarch_lookup_osabi): Do not return
GDB_OSABI_UNINITIALIZED.

* gdb.asm/asm-source.exp: Add "spu*-*-*" target.
* gdb.asm/spu.inc: New file.
* gdb.base/term.exp: Disable if [target_info exists noargs].
* gdb.gdb/complaints.exp: Disable if ![isnative].
* gdb.gdb/selftest.exp: Likewise.
* gdb.gdb/observer.exp: Likewise.
* gdb.gdb/xfullpath.exp: Likewise.
* gdb.base/attach.exp: Disable on SPU target.
* gdb.cp/bs145503.exp: Likewise.
* gdb.cp/exception.exp: Likewise.
* gdb.cp/userdef.exp: Likewise.

* gdb.stabs/weird.exp (print_weird_var): Don't send extra \n.

* config/powerpc/spu-linux.mh: New file.
* config/spu/spu.mt: New file.
* configure.ac: Provide gdb_native configuration variable.
* configure: Regenerate.
* configure.host: Support powerpc64 to spu 'pseudo-native' mode.
* configure.tgt: Add "spu" target_cpu and "spu*-*-*" target.
* Makefile.in (spu_tdep_h): New variable.
(ALLDEPFILES): Add spu-linux-nat.c and spu-tdep.c
(spu-linux-nat.o, spu-tdep.o): Add dependencies.
* spu-linux-nat.c: New file.
* spu-tdep.c: New file.
* spu-tdep.h: New file.

* findvar.c (address_from_register): New function.
* value.h (address_from_register): Add prototype.
* dwarf2loc.c (dwarf_expr_read_reg): Use address_from_register.

2006-11-22  Vladimir Prus  <vladimir@codesourcery.com>

        * breakpoint.c: Include "memattr.h".
        (automatic_hardware_breakpoints): New.
        (show_automatic_hardware_breakpoints): New.
        (insert_bp_location): Automatically use
        hardware breakpoints.
        (_initialize_breakpoint): Register the "auto-hw"
        variable.
        * Makefile.in (breakpoint.o): Update dependencies.

Add Irish translation for ld and Malay translation for gprof

* config/obj-elf.c (obj_elf_version): Use memcpy rather than strcpy.

* pef.c (bfd_pef_make_empty_symbol): Delete function.  Define instead.
* xsym.c (bfd_sym_make_empty_symbol): Likewise.
* xsym.h (bfd_sym_make_empty_symbol): Delete.

* elf32-ppc.c (ppc_elf_relocate_section): Fixup D field
at proper offset in little-endian mode.
* elf64-ppc.c (ppc_elf_relocate_section): Likewise.

*** empty log message ***

daily update

    gdb/
        * memattr.h (enum mem_access_mode): New value
        MEM_NONE.
        * memattr.c (unknown_mem_attrib): New.
        (inaccessible_by_default): New.
        (show_inaccessible_by_default): New.
        (lookup_mem_region): Check inaccessible_by_default.
        (dummy_cmd): New.
        (mem_set_cmdlist, mem_show_cmdlist): New.
        (_initialize_mem): Register new "set" and "show"
        commands.
        * target.c (memory_xfer_partial): If memory type
        is MEM_NONE, return an error.
        Clip to region size when calling to_xfer_partial.
        If upper limit of memory range is 0, don't clip
        anything.

        gdb/doc/
        * gdb.texinfo (Memory Access Checking): New.

* elf-eh-frame.c (struct cie): New type.
(cie_compare): Removed.
(cie_eq, cie_hash, cie_compute_hash): New functions.
(_bfd_elf_discard_section_eh_frame): Rewrite not to rely on FDEs
pointing only to last CIE and allow merging of any duplicate CIEs,
not just duplicate consecutive CIEs.
(_bfd_elf_discard_section_eh_frame_hdr): Delete cies hash table.
* elf-bfd.h (struct cie_header, struct cie): Removed.
(struct eh_frame_sec_info): Remove alloced field.
(struct eh_frame_hdr_info): Remove last_cie, last_cie_sec
and last_cie_inf fields.  Add cies field.

* ld-elf/eh5.d: New test.
* ld-elf/eh5.s: New file.
* ld-elf/eh5a.s: New file.
* ld-elf/eh5b.s: New file.

    * README: Remove obsolete information.

*** empty log message ***

daily update

Index: ChangeLog
2006-11-20  Andrew Cagney  <cagney@redhat.com>

* linux-nat.h: Refer to GNU/Linux or Linux kernel.
* linux-nat.c (lin_lwp_attach_lwp, linux_nat_thread_alive): Ditto.
* infcmd.c (attach_command): Ditto.
* hppa-linux-tdep.c (hppa_linux_regset): Ditto.
* mn10300-linux-tdep.c: Ditto.  Update copyright year.
* frv-linux-tdep.c: Ditto.  Update copyright year.

2006-11-20  H.J. Lu  <hongjiu.lu@intel.com>

* ld.texinfo: Fix a typo.

* emulparams/elf32_spu.sh (OTHER_SECTIONS): Define.

* bfd-in.h (struct stat): Don't typedef.
* bfdio.c (bfd_get_size): Return a file_ptr.
* cisco-core.c (cisco_core_file_validate): Use bfd_size_type for nread.
* mmo.c (mmo_scan): Use file_ptr for curpos.
* trad-core.c (trad_unix_core): Don't cast statbuf.st_size to
unsigned long.
* bfd-in2.h: Regenerate.

PR 3532
* bfd-in.h (struct bfd_hash_table): Reorganize.  Add "frozen".
* hash.c (bfd_hash_table_init_n): Init frozen.
(bfd_hash_lookup): Don't grow if frozen.
(bfd_hash_traverse): Freeze hash table during traversal.
* bfd-in2.h: Regenerate.

2006-11-16  Mei ligang  <ligang@sunnorth.com.cn>
* config/tc-score.c (score_relax_frag): If next frag contains 32 bit branch
instruction, handle it specially.
(score_insns): Modify 32 bit branch instruction.

    * NEWS: Add a new section for changes since GDB 6.6. Rename
        the section "Changes since GDB 6.5" into "Changes in GDB 6.6".
        Move a couple of items into the new section as they did not
        make it to 6.6.

*** empty log message ***

    GDB 6.6 branch created (branch timestamp: 2006-11-15 12:00)
        * version.in: Bump version to 6.6.50.20061119-cvs.

daily update

*** empty log message ***

* prologue-value.c (clear_entries): Fix memory leak.

2006-11-18  Pedro Alves  <pedro_alves@portugalmail.pt>
* parse.c (write_exp_msymbol): Check SYMBOL_BFD_SECTION before
dereferencing it.

daily update

*** empty log message ***

daily update

* utils.c (string_to_core_addr): Use error instead of
internal_error.
* mi/mi-main.c (mi_execute_command): Check for a NULL message.

* NEWS: Mention QPassSignals.

* elflink.c (_bfd_elf_check_kept_section): Test for kept group
section.  Save result of checks in kept_section.
(_bfd_elf_section_already_linked): Tidy.  Correct comments.
Ignore all group member sections.  Handle special matching of
single-member groups against linkonce sections via their group
section.  When such a match is found, set kept_section to the
group member section rather than to the group.

2006-11-16  Paolo Bonzini  <bonzini@gnu.org>

* Makefile.tpl (clean-target-libgcc): Test for gcc Makefile presence.
(unstage): Test for stage_last presence.

PR bootstrap/29802
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Add HOST_SUBDIR in STAGE_PREFIX.
* Makefile.in: Regenerate.

*** empty log message ***

daily update

* configure.ac: Correct td_thr_tls_get_addr test.
* configure: Regenerated.

Changelog update for my previous check-in.

2006-11-16  Maxim Grigoriev  <maxim2405@gmail.com>

   * MAINTAINERS (Responsible Maintainers): Add myself for Xtensa.
   (Write After Approval): Add myself.

gdb/
* remote.c (PACKET_QPassSignals): New.
(last_pass_packet, remote_pass_signals): New.
(remote_protocol_features): Add QPassSignals.
(remote_query_supported): Correct an infinite loop.
(remote_open_1): Reset last_pass_packet.
(remote_resume): Call remote_pass_signals.
(_initialize_remote): Register "set remote pass-signals".
gdb/doc/
* gdb.texinfo (Remote configuration): Mention
"pass-signals-packet".
(General Query Packets): Document QPassSignals.  Fix
a typo.
gdb/gdbserver/
* linux-low.c (linux_wait_for_event): Reformat.  Use the
pass_signals array.
* remote-utils.c (decode_address_to_semicolon): New.
* server.c (pass_signals, handle_general_set): New.
(handle_query): Mention QPassSignals for qSupported.
(main): Call handle_general_set.
* server.h (pass_signals, decode_address_to_semicolon): New.

gas/
* config/tc-m68k.c (m68k_ip):  Correct output of cpu aliases.
gas/testsuite/
* gas/m68k/all.exp: Add mcf-trap.
* gas/m68k/mcf-trap.[sd]: New.
opcodes/
* m68k-opc.c (m68k_opcodes): Place trap instructions before set
conditionals.  Add tpf coldfire instruction as alias for trapf.

* config/tc-score.c (score_relax_frag): If next frag contains 32 bit branch
instruction, handle it specially.
(score_insns): Modify 32 bit branch instruction.

Snapshot.  Includes first cut at output relocation sections.

*** empty log message ***

daily update

* symbols.c (resolve_symbol_value): Formatting.

gas/
2006-11-15  Jan Beulich  <jbeulich@novell.com>

PR/3469
* symbols.c (symbol_clone): Mark symbol ending up not on symbol
chain by linking it to itself.
(resolve_symbol_value): Also check symbol_shadow_p().
(symbol_shadow_p): New.
* symbols.h (symbol_shadow_p): Declare.

gas/testsuite/
2006-11-15  Jan Beulich  <jbeulich@novell.com>

* gas/elf/equ-reloc.[sd]: New.
* gas/elf/elf.exp: Run new test.

Add changelog entry for previous delta

*** empty log message ***

* Makefile.tpl (clean-stage*): Sync with GCC (clean).
* Makefile.in: Sync with GCC.
* configure.in: Sync with GCC (mpfr, gmp).
* configure: Sync with GCC.

daily update

2006-11-14  Maxim Grigoriev  <maxim@tensilica.com>

* NEWS: New port to Xtensa.
* Makefile.in: Add dependencies for Xtensa files.
* configure.tgt (xtensa*, xtensa*-*-elf*): New.
* configure.host (xtensa*-*-elf*): New.
* config/xtensa/xtensa.mt: New file.
* xtensa-config.c: New file.
* xtensa-tdep.h: New file.
* xtensa-tdep.c: New file.

2006-11-14  Maxim Grigoriev  <maxim@tensilica.com>

* gdb.texinfo (Contributors): Add contributors of Xtensa port.

gdb/
* remote.c (set_remote_cmd): Call help_list.
(show_remote_cmd): Skip legacy aliases.  Handle non-show_cmd
entries.  Add missed cleanup.
* cli/cli-setshow.c (cmd_show_list): Handle non-show_cmd entries.
gdb/doc/
* gdb.texinfo (Remote configuration): Rewrite documentation for
packet configuration commands.
(OS Information): Adjust reference to qXfer:auxv:read.
(General Query Packets): Remove references to read-aux-vector-packet
and set remote get-thread-local-storage-address.

More dynamic object support, initial scripting support.

* peXXigen.c: Updates for PE/COFF V8.0, and clarification
  (dir_names): Added CLR Runtime Header to dir_names[].
  (_bfd_XX_print_private_bfd_data_common): Added EFI_ROM and XBOX subsystem names
  (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out)
  (pe_print_idata, pe_print_edata)
  (_bfd_XX_bfd_copy_private_bfd_data_common)
  (_bfd_XXi_final_link_postscript): Use #DEFINEs for index into DataDirectory.
* pe.h: Added defines for IMAGE_SUBSYSTEM_EFI_ROM and IMAGE_SUBSYSTEM_XBOX.
* internal.h: Added defines for PE directory entry types.
  NB: in internal.h because IMAGE_NUMBEROF_DIRECTORY_ENTRYIES is in pe.h

gas/
* config/tc-arm.c (do_t_czb): Rename to do_t_cbz.
(insns): Adjust accordingly.
(md_apply_fix): Alter comments to use CBZ instead of CZB.

* tls.m4 (GCC_CHECK_TLS): Fall back to a link test.

Merge ChangeLog and multi.m4 from GCC repository.

*** empty log message ***

daily update

* ld-arm/arm-dyn.ld, ld-arm/arm-lib.ld: Remove .stack.
* ld-arm/armthumb-lib.d, ld-arm/mixed-app.d, ld-arm/mixed-lib.d:
Allow smaller section gap.
* ld-arm/armthumb-lib.sym, ld-arm/mixed-lib.sym: Reorder.  Remove
_stack.
* ld-arm/mixed-app.sym: Remove _stack.
* ld-arm/tls-app.d: Update start address.

bfd/
* bfd-in.h (bfd_elf32_arm_process_before_allocation): Update
prototype.
(bfd_elf32_arm_set_byteswap_code): New prototype.
* bfd-in2.h: Regenerate.
* elf32-arm.c (bfd_elf32_arm_process_before_allocation): Don't take
byteswap_code as an argument.  Revert 2006-11-01 change.
(bfd_elf32_arm_set_byteswap_code): New.
(elf32_arm_size_dynamic_sections): Call
bfd_elf32_arm_process_before_allocation.
ld/
* emultempl/armelf.em (arm_elf_before_allocation): Only call
bfd_elf32_arm_process_before_allocation if no dynamic sections.

Fix last entry.

Fixed up some indentation introduced by my last pactch.

Fix sigtramp cache code so that PPC register are read only if there is H/W.

2006-11-13  Denis Pilat  <denis.pilat@st.com>

* terminal.c (_rl_get_screen_size): use wr and wc variable to store
window size.

*** empty log message ***

daily update

* arm-tdep.c (arm_unwind_pc): Use arm_addr_bits_remove.

*** empty log message ***

daily update

*** empty log message ***

daily update

2006-11-10  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/merom.d: Use "#pass" instead of "#..." to skip the
rest of output.
* gas/i386/x86-64-merom.d: Likewise.

* frame.c (frame_register_unwind_location): New function.
(get_prev_frame_1): Check for UNWIND_NO_SAVED_PC.
(frame_stop_reason_string): Handle UNWIND_NO_SAVED_PC.
* frame.h (enum unwind_stop_reason): Add UNWIND_NO_SAVED_PC.

gdb/
* arch-utils.c (target_byte_order_user): Renamed from
target_byte_order.
(target_byte_order_auto, selected_byte_order): Removed.
(show_endian): Check target_byte_order_user.
(set_endian): Always update the architecture.  Set
target_byte_order_user after success.
(target_architecture_auto): Removed.
(target_architecture_user): New.
(selected_architecture_name, show_architecture): Check it.
(set_architecture): Set target_architecture_user after success.
(gdbarch_from_bfd): Check the argument.
(default_byte_order): New.
(initialize_current_architecture): Set the global default
architecture and endianness.
(gdbarch_info_fill): Remove GDBARCH argument.  Do not check the
previous architecture.  Use exec_bfd, global selected architecture
and endianness, and global defaults.
* arch-utils.h (selected_byte_order): Remove prototype.
(gdbarch_info_fill): Update.
* exec.c (exec_file_attach): Update the architecture after removing
the current file.
* gdbarch.sh: Update comments.
(find_arch_by_info): Remove OLD_GDBARCH argument.  Update call to
gdbarch_info_fill.
(gdbarch_find_by_info): Update call to find_arch_by_info.
* gdbarch.h, gdbarch.c: Regenerated.
* remote-sim.c (gdbsim_open): Use TARGET_BYTE_ORDER.
gdb/doc/
* gdbint.texinfo (Target Architecture Definition): Add new
Initializing a New Architecture section.

2006-11-10  Vladimir Prus  <vladimir@codesourcery.com>

        * gdb.base/completion.exp: Fix completion tests for
        'info' and 'info '.
        * gdb.base/help.exp (help_test_raw, test_class_help)
        (test_prefix_command_help): Move...
        * lib/gdb.exp: Here.
        * gdb.base/main.exp: Adjust.
        * gdb.cp/maint.exp: Adjust.
        * gdb.trace/tracecmd.exp: Use test_help_class.

* config.bfd (mips*el-sde-elf*, mips*-sde-elf*): Drop ECOFF support
for SDE configs.

* gas/cfi/cfi.exp: Don't run cfi-common-6 for mips*-*.

* config/tc-arm.c (arm_fix_adjustable) [OBJ_COFF]: Delete.
  (arm_fix_adjustable) [OBJ_ELF]: Use it on coff targets too.
* gas/arm/local_label_coff.s: New test.
* gas/arm/local_label_coff.d: New test.
* gas/arm/local_label_elf.s: New test.
* gas/arm/local_label_elf.d: New test.
* gas/arm/local_label_wince.s: New test.
* gas/arm/local_label_wince.d: New test.

* config.bfd: Move previously obsoleted targets to the REMOVED list.
  Add maxq-*-coff to the obsolete list.

PR gas/3456:
* config/obj-elf.c (obj_elf_version): Do not include the name field's padding in the namesz value.

 * pe-arm-wince.c (LOCAL_LABEL_PREFIX): Define as ".".
 * pei-arm-wince.c (LOCAL_LABEL_PREFIX): Likewise.
 * coff-arm.c (LOCAL_LABEL_PREFIX): Only define if not defined before.
 * gas/arm/undefined.d: Run test on Windows CE.
 * gas/arm/undefined_coff.d: Don't run test on Windows CE.

2006-11-09  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (print_insn): Check PREFIX_REPNZ before
PREFIX_DATA when prefix user table is used.

2006-11-09  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (twobyte_uses_SSE_prefix): Renamed to ...
(twobyte_uses_DATA_prefix): This.
(twobyte_uses_REPNZ_prefix): New.
(twobyte_uses_REPZ_prefix): Likewise.
(threebyte_0x38_uses_DATA_prefix): Likewise.
(threebyte_0x38_uses_REPNZ_prefix): Likewise.
(threebyte_0x38_uses_REPZ_prefix): Likewise.
(threebyte_0x3a_uses_DATA_prefix): Likewise.
(threebyte_0x3a_uses_REPNZ_prefix): Likewise.
(threebyte_0x3a_uses_REPZ_prefix): Likewise.
(print_insn): Updated checking usages of DATA/REPNZ/REPZ
prefixes.

Fix garbled ChangeLog entry.