svga: add mksstats for surface view emulation

Add mksstats for surface view emulation and also tighten the stat
CreateBackedView for the actual creation of backed view.

Reviewed-by: Brian Paul <brianp@vmware.com>

svga: change error handling convention for svga_set_stream_output()

In general, the functions which emit commands to the command buffer check
for failure and return a PIPE_ERROR_x code.  It's up to the caller to
flush the buffer and retry the command.

But svga_set_stream_output() did its own flushing and the callers never
checked the return value (though, it would always be PIPE_OK) in practice.

This patch changes svga_set_stream_output() so that it does not call
svga_context_flush() when the buffer is full.  And we update the callers
to check the return value as we do for other functions, like
svga_set_shader().

No Piglit regressions.  Also tested w/ Nature demo.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: fixed surface size to include array size

This patch fixes the total surface size in surface cache
to include array size as well.

Tested with MTT glretrace.

Reviewed-by: Brian Paul <brianp@vmware.com>

svga: loop over box.depth for ReadBack_image on each slice

piglit test ext_texture_array-gen-mipmap is fixed with this patch.

Tested with mtt piglit, glretrace, viewperf and conform. No regression.

Reviewed-by: Brian Paul <brianp@vmware.com>

svga: add mksstats for context creation

Reviewed-by: Brian Paul <brianp@vmware.com>

svga: re-validate sampler view at draw time if needed

This patch validates those sampler views with backing copy
of texture whose original copy has been updated since the
view is last validated.
This is done here at draw time because the texture binding might not
have modified, hence validation is not triggered at state update time,
and yet the texture might have been updated in another context, so
we need to re-validate the sampler view in order to update the backing
copy of the updated texture.

This fixes a rendering flickering issue with Photoshop running in
Linux VM with HWversion 11. The problem is Photoshop renders to texture A
in context X, and then bind texture A to context Y. The first time
when texture A is bound to context Y, cso calls pipe->set_sampler_views().
Validation of sampler views is done, rendering is fine.
But when texture A is rendered to again in context X, and rebound in
context Y, cso skips pipe->set_sampler_views() because texture A is already
bound in context Y. SVGA driver is not given a chance to re-validate
the texture binding, the backing copy of the texture is not updated,
and hence causes black image.

Tested with Photoshop, MTT glretrace, piglit.
Fixes VMware bug 1769103.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

automake: include git_sha1_gen.sh into EXTRA_DIST

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

Update Khronos-supplied headers

Taken from commit 676834dd529d620ee25090e738d2607dfde003d8
of https://github.com/KhronosGroup/OpenGL-Registry.git

v2:
- keep the BUILDING_MESA bits (Matt)

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965/i915: Add UYVY as the supported format

Trigger the correct sampler options for it. Similar with YUYV

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

nir: Add a lowering pass for UYVY textures

Similar with support for YUYV but with byte order difference in sampler

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

dri: Add UYVY as available format

UYVY is diffrent with YUYV in byte order.
YUYV is already declared in dri_interface.h,
this CL add the difinitions for UYVY.
Drivers can add UYVY as supported format

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

gbm: add XBGR8888 support for dumb buffers

Add GBM_FORMAT_XBGR8888 format support which is needed for Android.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

gallium: os_process fixes for Android

The function getprogname() is available on Android, since it reuses
various BSD solutions C runtime.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

etnaviv: Add unreachable statement to etna_amode to fix compilation warnings

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

swr: Remove need to allocate vertex buffer scratch space all in one go

Deferred deletion (via "fence_work") has obsoleted the need to allocate
all client vertex buffer scratch space in a single chunk.  Scratch
allocations are now valid until the referenced fence is complete.

Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: conditionally validate vertex buffer state

Vertex buffer state doesn't need to be validated on every call,
only on dirty _NEW_VERTEX or indexed draws.

Unconditional validation was introduced as part of patch 330d0607ed6,
"remove pipe_index_buffer and set_index_buffer", with the expectation
we'd optimize later.

Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: set dynamic vertex size

Reduces the memory footprint of the frontend processing by packing
vertices.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

scons: wait on subprocess' completion

Windows doesn't allow you to move a file that's opened, and Popen()
doesn't wait on its subprocess' completion before returning, which leads
to broken Windows build.

Fixes: 3fd425aed764fb771f2f "build systems: uniformize git_sha1.h generation"
Suggested-by: Scott D Phillips <scott.d.phillips@intel.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

build systems: uniformize git_sha1.h generation

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

radeonsi: set COMPUTE_DISPATCH_INITIATOR.ORDER_MODE = 1

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: use the DISPATCH packets to force COMPUTE_START_X/Y/Z = 0

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

Android: use symlinks for driver loading

Instead of having special driver loading logic for Android, create
symlinks to gallium_dri.so so we can use the standard loading logic.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Android: i965: remove libdrm_intel dependency

Commit 7dd20bc3ee8f ("anv/i965: drop libdrm_intel dependency completely")
removed the libdrm_intel dependency for automake, but Android builds still
depended on it. Now the build requires a newer version of i915_drm.h and
fails on Android builds:

src/mesa/drivers/dri/i965/brw_performance_query.c:616:9: error: use of undeclared identifier 'I915_OA_FORMAT_A32u40_A4u32_B8_C8'
   case I915_OA_FORMAT_A32u40_A4u32_B8_C8:
        ^
src/mesa/drivers/dri/i965/brw_performance_query.c:1887:18: error: use of undeclared identifier 'I915_PARAM_SLICE_MASK'
      gp.param = I915_PARAM_SLICE_MASK;
                 ^
src/mesa/drivers/dri/i965/brw_performance_query.c:1893:18: error: use of undeclared identifier 'I915_PARAM_SUBSLICE_MASK'
      gp.param = I915_PARAM_SUBSLICE_MASK;
                 ^

Remove the libdrm_intel dependency for Android builds and add the necessary
include paths for the local copy of i915_drm.h.

Fixes: 7dd20bc ("anv/i965: drop libdrm_intel dependency completely")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

android: anv: drop libdrm_intel dependency

In addition to Rob Herring "Android: i965: remove libdrm_intel dependency",
we can drop libdrm_intel dependency in anv for Android.

Please check if libdrm has to stay as shared dependency and drop this comment line.

Fixes: 7dd20bc ("anv/i965: drop libdrm_intel dependency completely")
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

etnaviv: fix memory leak when BO allocation fails

The resource struct is already allocated at this point and should be
freed properly.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>

etnaviv: fill in layer_stride for imported resources

The layer stride information is used in various parts of the driver,
so it needs to be present regardless if the driver allocated the
buffer itself or merely imported it from an external source.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>

anv: use devinfo for number of thread/eu

It turns out Gen9LP has fewer threads per EU (6 vs 7).

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

intel: tools: add intel_aub.h as part of aubinator

Include intel_aub.h in the Makefile.tools.am

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel: automake: include Makefile.drm.am

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa: Require mipmap completeness for glCopyImageSubData() at times.

This patch makes glCopyImageSubData require mipmap completeness when the
texture object's built-in sampler object has a mipmapping MinFilter.
This is apparently the de facto behavior and mandated by Android's CTS.

One exception is that we ignore format based completeness rules
(specifically integer formats with linear filtering), as this is
also the de facto behavior that until recently was mandated by the
OpenGL 4.5 CTS.

This was discussed with both the OpenGL and OpenGL ES working groups,
and while everyone agrees this behavior is unfortunate and complicated,
it is what it is at this point.  There was little appetite for relaxing
restrictions given that all conformant Android drivers followed the
mipmapping rule, and all conformant GL 4.5 implementations ignored the
integer/linear rule.

Fixes (on i965):
dEQP-GLES31.functional.debug.negative_coverage.*.buffer.copy_image_sub_data

Bugzilla: https://cvs.khronos.org/bugzilla/show_bug.cgi?id=16224
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: tidy up white space in pixelstore.c

mesa: Refactor error checking for GL_TEXTURE_BASE_LEVEL vs texture targets

Add a big spec quotation justifying the error generated, which has
changed over the GL versions.

v2: Compact the spec quote based on a Khronos bug and discussion with Jason.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: Drop index buffer re-alignment code.

This shouldn't ever happen - GL requires it to be aligned:

   "Clients must align data elements consistent with the requirements
    of the client platform, with an additional base-level requirement
    that an offset within a buffer to a datum comprising N basic
    machine units be a multiple of N."

Mesa should reject unaligned index buffers for us - we shouldn't have
to handle them in the driver.

Note that Gallium already makes this assumption.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: add KHR_no_error support for glBlendFunc*()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: create some glBlendFunc*() helper functions

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add KHR_no_error support for glBindFragDataLocation*()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add bind_frag_data_location() helper

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add KHR_no_error support for glGetUniformLocation()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: inline _mesa_finish()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add KHR_no_error support for glDisableVertexA*A*()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: move error handling into disable_vertex_array_attrib() callers

This will let us just call disable_vertex_array_attrib() for
KHR_no_error support.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add KHR_no_error support for glEnableVertexA*A*()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add KHR_no_error support for glLogicOp()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add logic_op() helper

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add KHR_no_error support for glPixelStore*()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add pixel_storei() helper

Will be used to add KHR_no_error support.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: remove redundant error check

We do the same check in the shared code in the set_tex_parameterf()
call.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: GL_TEXTURE_BORDER_COLOR exists in OpenGL 1.0, so don't depend on GL_ARB_texture_border_clamp

On NV20 (and probably also on earlier NV GPUs that lack
GL_ARB_texture_border_clamp) fixes the following piglit tests:

    gl-1.0-beginend-coverage gltexparameter[if]{v,}
    push-pop-texture-state
    texwrap 1d
    texwrap 1d proj
    texwrap 2d proj
    texwrap formats

All told, 49 more tests pass on NV20 (10de:0201).

No changes on Intel CI run or RV250 (1002:4c66).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

genxml: Silence about a billion unused parameter warnings

v2: Use textwrap.dedent to make the source line a lot shorter.
Shortening (?) the line was requested by Jason.

v3: Simplify the texwrap.dedent usage.  Suggested by Dylan.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

mesa: Fix Android build

The format_fallback.py script wants two arguments: 'csv-file' and
'out-file'.

Fixes: 20c99eaece "mesa: Add _mesa_format_fallback_rgbx_to_rgba() [v2]"
Reported-by: Rob Herring <robh@kernel.org>

i965: Fix anisotropic filtering for mag filter

Commit f8d69beed49c64f883bb8ffb28d4960306baf575 moving sampler
handling to genxml messed up change done by commit
6a7c5257cac23cd9767aa4bc8fdab68925b11157.

This broke rendering in SynMark CSDof and TexFilterAniso tests.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101607

Thanks to Kevin, who spotted the actual typo!
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

etnaviv: fix shader miscompilation with more than 16 labels

The labels array may change its virtual address on a reallocation, so
it is invalid to cache pointers into the array. Rather than using the
pointer directly, remember the array index.

Fixes miscompilation of shaders in glmark2 ideas, leading to GPU hangs.

Fixes: c9e8b49b (etnaviv: gallium driver for Vivante GPUs)
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

ac/nir: remove last remnants of v16i8

llvm doesn't need this workaround anymore.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

ac/nir: Use correct LLVM intrinsics for atomic ops on imageBuffers

The buffer intrinsics should be used instead of the image ones.

Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac/nir: assert printfs will fit

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac/nir: Make intrinsic_name buffer long enough

When using cmpswap on an image, it was being trunctated to
lvm.amdgcn.image.atomic.cmpswa, with the coords type missing entirely.

v2: Add stable CC

CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

i965/dri: Support R8G8B8A8 and R8G8B8X8 configs

The Android framework requires support for EGLConfigs with
HAL_PIXEL_FORMAT_RGBX_8888 and HAL_PIXEL_FORMAT_RGBA_8888.

Even though all RGBX formats are disabled on gen9 by
brw_surface_formats.c, the new configs work correctly on Broxton thanks
to _mesa_format_fallback_rgbx_to_rgba().

On GLX, this creates no new configs, and therefore breaks no existing
apps. See in-patch comments for explanation. I tested with glxinfo and
glxgears on Skylake.

On Wayland, this also creates no new configs, and therfore breaks no
existing apps. (I tested with mesa-demos' eglinfo and es2gears_wayland
on Skylake). The reason differs from GLX, though. In
dri2_wl_add_configs_for_visual(), the format table contains only
B8G8R8X8, B8G8R8A8, and B5G6B5; and dri2_add_config() correctly matches
EGLConfig to format by inspecting channel masks.

On Android, in Chrome OS, I tested this on a Broxton device. I confirmed
that the Google Play Store's EGLSurface used HAL_PIXEL_FORMAT_RGBA_8888,
and that an Asteroid game's EGLSurface used HAL_PIXEL_FORMAT_RGBX_8888.
Both apps worked well. (Disclaimer: I didn't test this patch on Android
with Mesa master. I backported this patch series to an older Android
branch).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

mesa: do not use format string as literal string

This fixes a couple of  errors when building in Android:

external/mesa3d/src/mesa/main/shaderapi.c:293:49: error: format string
is not a string literal (potentially insecure)
[-Werror,-Wformat-security]
         _mesa_error(ctx, GL_INVALID_OPERATION, caller);
                                                ^~~~~~
external/mesa3d/src/mesa/main/shaderapi.c:293:49: note: treat the string
as an argument to avoid this
         _mesa_error(ctx, GL_INVALID_OPERATION, caller);
                                                ^
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>

scons: add code to generate format_fallback.c file

Fixes: a1983223d8839a0c9 "mesa: Add _mesa_format_fallback_rgbx_to_rgba() [v2]"

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

mesa: add KHR_no_error support for glClear()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add clear() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glBindAttribLocation()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add bind_attrib_location() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for gl*ReadBuffer()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: create read_buffer_err() and always inline read_buffer()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glVertex*AttribBinding()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glShaderStorageBlockBinding()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add shader_storage_block_binding() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glUniformBlockBinding()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add uniform_block_binding() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glFenceSync()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add fence_sync() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glClientWaitSync()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add client_wait_sync() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glCheckFramebufferStatus()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for gl*Renderbuffers()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: prepare create_render_buffers() for KHR_no_error support

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for gl*ProgramPipelines()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: prepare create_program_pipelines() for KHR_no_error support

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for gl*Samplers()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: prepare create_samplers() helper for KHR_no_error support

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for gl*Textures()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: prepare create_textures() helper for KHR_no_error support

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: fix an error message in create_textures()

Trivial.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for gl*Buffers()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: prepare create_buffers() helper for KHR_no_error support

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glBindTextureUnit()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add bind_texture_unit() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glDepthRangeIndexed()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glDepthFunc()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add depth_func() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glFrontFace()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add front_face() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glCullFace()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add cull_face() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glCreateShader() and glCreateShaderObjectARB()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: rename create_shader() to create_shader_err()

And add a no_error variant.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: pass the 'caller' function to create_shader()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glAttachShader() and glAttachObjectARB()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: rename attach_shader() to attach_shader_err()

And add a no_error variant.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>