block: don't add or resize partition on the disk with GENHD_FL_NO_PART

commit 1a721de8489fa559ff4471f73c58bb74ac5580d3 upstream.

Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.

Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"

commit 5260bd6d36c83c5b269c33baaaf8c78e520908b0 upstream.

This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83.

d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.

But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4.  The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.

Revert d5af729dc207 as requested by Wu Zongyong.  This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.

Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: Fix calculation ntb_transport_tx_free_entry()

commit 5a7693e6bbf19b22fd6c1d2c4b7beb0a03969e2c upstream.

ntb_transport_tx_free_entry() never returns 0 with the current
calculation. If head == tail, then it would return qp->tx_max_entry.
Change compare to tail >= head and when they are equal, a 0 would be
returned.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: renlonglong <ren.longlong@h3c.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: Clean up tx tail index on link down

commit cc79bd2738c2d40aba58b2be6ce47dc0e471df0e upstream.

The tx tail index is not reset when the link goes down. This causes the
tail index to go out of sync when the link goes down and comes back up.
Refactor the ntb_qp_link_down_reset() and reset the tail index as well.

Fixes: 2849b5d70641 ("NTB: Reset transport QP link stats on down")
Reported-by: Yuan Y Lu <yuan.y.lu@intel.com>
Tested-by: Yuan Y Lu <yuan.y.lu@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: Drop packets when qp link is down

commit f195a1a6fe416882984f8bd6c61afc1383171860 upstream.

Currently when the transport receive packets after netdev has closed the
transport returns error and triggers tx errors to be incremented and
carrier to be stopped. There is no reason to return error if the device is
already closed. Drop the packet and return 0.

Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Reported-by: Yuan Y Lu <yuan.y.lu@intel.com>
Tested-by: Yuan Y Lu <yuan.y.lu@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/PM: Only read PCI_PM_CTRL register when available

commit 5694ba13b004eea683c6d4faeb6d6e7a9636bda0 upstream.

For a device with no Power Management Capability, pci_power_up() previously
returned 0 (success) if the platform was able to put the device in D0,
which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even
though it doesn't exist.

Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually
read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted
dev->current_state.  This led to messages like this in some cases:

  pci 0000:01:00.0: Refused to change power state from D3hot to D0

To prevent this, make pci_power_up() always return a negative failure code
if the device lacks a Power Management Capability, even if non-PCI platform
power management has been able to put the device in D0.  The failure will
prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL.

Fixes: e200904b275c ("PCI/PM: Split pci_power_up()")
Link: https://lore.kernel.org/r/20230824013738.1894965-1-chenfeiyang@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation

commit 04bbe863241a9be7d57fb4cf217ee4a72f480e70 upstream.

When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.

Avoid the panic by checking if MSI-X/MSI is enabled.

Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com
Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Free released resource after coalescing

commit 8ec9c1d5d0a5a4744516adb483b97a238892f9d5 upstream.

release_resource() doesn't actually free the resource or resource list
entry so free the resource list entry to avoid a leak.

Closes: https://lore.kernel.org/r/878r9sga1t.fsf@kernel.org/
Fixes: e54223275ba1 ("PCI: Release resource invalidated by coalescing")
Link: https://lore.kernel.org/r/20230906110846.225369-1-ross.lagerwall@citrix.com
Reported-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Perform additional retries if doorbell read returns 0

commit 4ca10f3e31745d35249a727ecd108eb58f0a8c5e upstream.

The driver retries certain register reads 3 times if the returned value is
0. This was done because the controller could return 0 for certain
registers if other registers were being accessed concurrently by the BMC.

In certain systems with increased BMC interactions, the register values
returned can be 0 for longer than 3 retries. Change the retry count from 3
to 30 for the affected registers to prevent problems with out-of-band
management.

Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: qla2xxx: Fix buffer overrun"

commit 641671d97b9199f1ba35ccc2222d4b189a6a5de5 upstream.

Revert due to Get PLOGI Template failed.
This reverts commit b68710a8094fdffe8dd4f7a82c82649f479bb453.

Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi_venus: Write to VIDC_CTRL_INIT after unmasking interrupts

commit d74e481609808330b4625b3691cf01e1f56e255e upstream.

The startup procedure shouldn't be started with interrupts masked, as that
may entail silent failures.

Kick off initialization only after the interrupts are unmasked.

Cc: stable@vger.kernel.org # v4.12+
Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb: symbol fixup for dvb_attach()

commit 86495af1171e1feec79faa9b64c05c89f46e41d1 upstream.

In commit 9011e49d54dc ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols.  This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().

Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().

Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.

commit 99bf5b0baac941176a6a3d5cef7705b29808de34 upstream.

Recently in v6.3-rc1 there was a change affecting behaviour of hrtimers
(commit 0c52310f260014d95c1310364379772cb74cf82d) and causing
few issues on platforms with two CS42L42 codecs. Canonical/Dell
has reported an issue with Vostro-3910.
We need to increase this value by 15ms.

Link: https://bugs.launchpad.net/somerville/+bug/2031060
Fixes: 9fb9fa18fb50 ("ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230904160033.908135-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: csum: Fix OoB access in IP checksum code for negative lengths

commit 8bd795fedb8450ecbef18eeadbd23ed8fc7630f5 upstream.

Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:

 | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
 |
 | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
 | Call trace:
 |  dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
 |  show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
 |  __dump_stack lib/dump_stack.c:88 [inline]
 |  dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
 |  print_address_description mm/kasan/report.c:351 [inline]
 |  print_report+0x174/0x514 mm/kasan/report.c:462
 |  kasan_report+0xd4/0x130 mm/kasan/report.c:572
 |  kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
 |  __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
 |  do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
 |  csum_partial+0x30/0x58 lib/checksum.c:128
 |  gso_make_checksum include/linux/skbuff.h:4928 [inline]
 |  __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
 |  udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
 |  ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
 |  skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
 |  __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
 |  skb_gso_segment include/linux/netdevice.h:4859 [inline]
 |  validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
 |  validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
 |  sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
 |  __dev_xmit_skb net/core/dev.c:3805 [inline]
 |  __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
 |  dev_queue_xmit include/linux/netdevice.h:3085 [inline]
 |  packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
 |  packet_snd net/packet/af_packet.c:3081 [inline]
 |  packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
 |  sock_sendmsg_nosec net/socket.c:724 [inline]
 |  sock_sendmsg net/socket.c:747 [inline]
 |  __sys_sendto+0x3b4/0x538 net/socket.c:2144

Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c

Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 5777eaed566a ("arm64: Implement optimised checksum routine")
Reported-by: syzbot+4a9f9820bd8d302e22f7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000e0e94c0603f8d213@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i3c: master: svc: fix probe failure when no i3c device exist

commit 6e13d6528be2f7e801af63c8153b87293f25d736 upstream.

I3C masters are expected to support hot-join. This means at initialization
time we might not yet discover any device and this should not be treated
as a fatal error.

During the DAA procedure which happens at probe time, if no device has
joined, all CCC will be NACKed (from a bus perspective). This leads to an
early return with an error code which fails the probe of the master.

Let's avoid this by just telling the core through an I3C_ERROR_M2
return command code that no device was discovered, which is a valid
situation. This way the master will no longer bail out and fail to probe
for a wrong reason.

Cc: stable@vger.kernel.org
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: mm: Add p?d_leaf() definitions

commit 303be4b33562a5b689261ced1616bf16ad49efa7 upstream.

When I do LTP test, LTP test case ksm06 caused panic at
break_ksm_pmd_entry
  -> pmd_leaf (Huge page table but False)
  -> pte_present (panic)

The reason is pmd_leaf() is not defined, So like commit 501b81046701
("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for
LoongArch.

Fixes: 09cfefb7fa70 ("LoongArch: Add memory management")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: PMU: fix base address for the newer hardware

commit 687eb3c42f4ad81e7c947c50e2d865f692064291 upstream.

With introduction of ERI access control in RG.0 base address of the PMU
unit registers has changed. Add support for the new PMU configuration.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: register edp_backlight_control() for DCN301

commit 1611917f39bee1abfc01501238db8ac19649042d upstream.

As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit")
Suggested-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight/lv5207lp: Compare against struct fb_info.device

commit 1ca8819320fd84e7d95b04e7668efc5f9fe9fa5c upstream.

Struct lv5207lp_platform_data refers to a platform device within
the Linux device hierarchy. The test in lv5207lp_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Fixes: 82e5c40d88f9 ("backlight: Add Sanyo LV5207LP backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight/bd6107: Compare against struct fb_info.device

commit 992bdddaabfba19bdc77c1c7a4977b2aa41ec891 upstream.

Struct bd6107_platform_data refers to a platform device within
the Linux device hierarchy. The test in bd6107_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Fixes: 67b43e590415 ("backlight: Add ROHM BD6107 backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight/gpio_backlight: Compare against struct fb_info.device

commit 7b91d017f77c1bda56f27c2f4bbb70de7c6eca08 upstream.

Struct gpio_backlight_platform_data refers to a platform device within
the Linux device hierarchy. The test in gpio_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.

Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.

v2:
* move renames into separate patch (Javier, Sam, Michael)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8b770e3c9824 ("backlight: Add GPIO-based backlight driver")
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: break iopolling on signal

commit dc314886cb3d0e4ab2858003e8de2917f8a3ccbd upstream.

Don't keep spinning iopoll with a signal set. It'll eventually return
back, e.g. by virtue of need_resched(), but it's not a nice user
experience.

Cc: stable@vger.kernel.org
Fixes: def596e9557c9 ("io_uring: support for IO polling")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/eeba551e82cad12af30c3220125eb6cb244cc94c.1691594339.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XArray: Do not return sibling entries from xa_load()

commit cbc02854331edc6dc22d8b77b6e22e38ebc7dd51 upstream.

It is possible for xa_load() to observe a sibling entry pointing to
another sibling entry.  An example:

Thread A: Thread B:
xa_store_range(xa, entry, 188, 191, gfp);
xa_load(xa, 191);
entry = xa_entry(xa, node, 63);
[entry is a sibling of 188]
xa_store_range(xa, entry, 184, 191, gfp);
if (xa_is_sibling(entry))
offset = xa_to_sibling(entry);
entry = xa_entry(xas->xa, node, offset);
[entry is now a sibling of 184]

It is sufficient to go around this loop until we hit a non-sibling entry.
Sibling entries always point earlier in the node, so we are guaranteed
to terminate this search.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix -Warray-bounds warning in _pwrdm_state_switch()

commit 847fb80cc01a54bc827b02547bb8743bdb59ddab upstream.

If function pwrdm_read_prev_pwrst() returns -EINVAL, we will end
up accessing array pwrdm->state_counter through negative index
-22. This is wrong and the compiler is legitimately warning us
about this potential problem.

Fix this by sanity checking the value stored in variable _prev_
before accessing array pwrdm->state_counter.

Address the following -Warray-bounds warning:
arch/arm/mach-omap2/powerdomain.c:178:45: warning: array subscript -22 is below array bounds of 'unsigned int[4]' [-Warray-bounds]

Link: https://github.com/KSPP/linux/issues/307
Fixes: ba20bb126940 ("OMAP: PM counter infrastructure.")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/20230607050639.LzbPn%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Message-ID: <ZIFVGwImU3kpaGeH@work>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi_si: fix a memleak in try_smi_init()

commit 6cf1a126de2992b4efe1c3c4d398f8de4aed6e3f upstream.

Kmemleak reported the following leak info in try_smi_init():

unreferenced object 0xffff00018ecf9400 (size 1024):
  comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s)
  backtrace:
    [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0
    [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si]
    [<000000006460d325>] 0xffff800081b10148
    [<0000000039206ea5>] do_one_initcall+0x64/0x2a4
    [<00000000601399ce>] do_init_module+0x50/0x300
    [<000000003c12ba3c>] load_module+0x7a8/0x9e0
    [<00000000c246fffe>] __se_sys_init_module+0x104/0x180
    [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30
    [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250
    [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0
    [<000000005a05337f>] el0_svc+0x24/0x3c
    [<000000005eb248d6>] el0_sync_handler+0x160/0x164
    [<0000000030a59039>] el0_sync+0x160/0x180

The problem was that when an error occurred before handlers registration
and after allocating `new_smi->si_sm`, the variable wouldn't be freed in
the error handling afterwards since `shutdown_smi()` hadn't been
registered yet. Fix it by adding a `kfree()` in the error handling path
in `try_smi_init()`.

Cc: stable@vger.kernel.org # 4.19+
Fixes: 7960f18a5647 ("ipmi_si: Convert over to a shutdown handler")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Message-Id: <20230629123328.2402075-1-gongruiqi@huaweicloud.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address

commit cdb50033dd6dfcf02ae3d4ee56bc1a9555be6d36 upstream.

A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs.
This would result in the upper 32 bits being unintentionally zeroed and
MSIs getting mapped to incorrect PCI addresses if the address had any
of the upper bits set.

Replace 32-bit mask by appropriate 64-bit mask.

[kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility]
Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: Add a camera sensor top level menu

commit 7d3c7d2a2914e10bec3b9cdacdadb8e1f65f715a upstream.

Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This
also adds the options to drivers that don't specifically need them, these
are still seldom used drivers using old APIs. The upside is that these
should now all compile --- many drivers have had missing dependencies.

The "menu" is replaced by selectable "menuconfig" to select the needed
V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options.

Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively
depends on, and add the I2C dependency to the menu.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # for >= 6.1
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: ccs: Check rules is non-NULL

commit 607bcc4213d998d051541d8f10b5bbb7d546c0be upstream.

Fix the following smatch warning:

drivers/media/i2c/ccs/ccs-data.c:524 ccs_data_parse_rules() warn: address
of NULL pointer 'rules'

The CCS static data rule parser does not check an if rule has been
obtained before checking for other rule types (which depend on the if
rule). In practice this means parsing invalid CCS static data could lead
to dereferencing a NULL pointer.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org # for 5.11 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpu/hotplug: Prevent self deadlock on CPU hot-unplug

commit 2b8272ff4a70b866106ae13c36be7ecbef5d5da2 upstream.

Xiongfeng reported and debugged a self deadlock of the task which initiates
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer.

    CPU1                          CPU2

T1 sets cfs_quota
   starts hrtimer cfs_bandwidth 'period_timer'
T1 is migrated to CPU2
T1 initiates offlining of CPU1
Hotplug operation starts
  ...
'period_timer' expires and is re-enqueued on CPU1
  ...
take_cpu_down()
  CPU1 shuts down and does not handle timers
  anymore. They have to be migrated in the
  post dead hotplug steps by the control task.

T1 runs the post dead offline operation
       T1 is scheduled out
T1 waits for 'period_timer' to expire

T1 waits there forever if it is scheduled out before it can execute the hrtimer
offline callback hrtimers_dead_cpu().

Cure this by delegating the hotplug control operation to a worker thread on
an online CPU. This takes the initiating user space task, which might be
affected by the bandwidth timer, completely out of the picture.

Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/8e785777-03aa-99e1-d20e-e956f5685be6@huawei.com
Link: https://lore.kernel.org/r/87h6oqdq0i.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmalloc: add a safer version of find_vm_area() for debug

commit 0818e739b5c061b0251c30152380600fb9b84c0c upstream.

It is unsafe to dump vmalloc area information when trying to do so from
some contexts.  Add a safer trylock version of the same function to do a
best-effort VMA finding and use it from vmalloc_dump_obj().

[applied test robot feedback on unused function fix.]
[applied Uladzislau feedback on locking.]
Link: https://lkml.kernel.org/r/20230904180806.1002832-1-joel@joelfernandes.org
Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Fix the scsi_set_resid() documentation

commit f669b8a683e4ee26fa5cafe19d71cec1786b556a upstream.

Because scsi_finish_command() subtracts the residual from the buffer
length, residual overflows must not be reported. Reflect this in the SCSI
documentation. See also commit 9237f04e12cc ("scsi: core: Fix
scsi_get/set_resid() interface")

Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230721160154.874010-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: ringbuffer: Fix truncating buffer size min_t cast

commit 53e9e33ede37a247d926db5e4a9e56b55204e66c upstream.

If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in
copy_data() was causing writes to truncate. This manifested as output
bytes being skipped, seen as %NUL bytes in pstore dumps when the available
record size was larger than 65536. Fix the cast to no longer truncate
the calculation.

Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Reported-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/d8bb1ec7-a4c5-43a2-9de0-9643a70b899f@linux.microsoft.com/
Fixes: b6cf8b3f3312 ("printk: add lockless ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Reviewed-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Tested-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230811054528.never.165-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: dump vmalloc memory info safely

commit c83ad36a18c02c0f51280b50272327807916987f upstream.

Currently, for double invoke call_rcu(), will dump rcu_head objects memory
info, if the objects is not allocated from the slab allocator, the
vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to
be held, since the call_rcu() can be invoked in interrupt context,
therefore, there is a possibility of spinlock deadlock scenarios.

And in Preempt-RT kernel, the rcutorture test also trigger the following
lockdep warning:

BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
3 locks held by swapper/0/1:
 #0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0
 #1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370
 #2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70
irq event stamp: 565512
hardirqs last  enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940
hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370
softirqs last  enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170
softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0
Preemption disabled at:
[<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W          6.5.0-rc4-rt2-yocto-preempt-rt+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x68/0xb0
 dump_stack+0x14/0x20
 __might_resched+0x1aa/0x280
 ? __pfx_rcu_torture_err_cb+0x10/0x10
 rt_spin_lock+0x53/0x130
 ? find_vmap_area+0x1f/0x70
 find_vmap_area+0x1f/0x70
 vmalloc_dump_obj+0x20/0x60
 mem_dump_obj+0x22/0x90
 __call_rcu_common+0x5bf/0x940
 ? debug_smp_processor_id+0x1b/0x30
 call_rcu_hurry+0x14/0x20
 rcu_torture_init+0x1f82/0x2370
 ? __pfx_rcu_torture_leak_cb+0x10/0x10
 ? __pfx_rcu_torture_leak_cb+0x10/0x10
 ? __pfx_rcu_torture_init+0x10/0x10
 do_one_initcall+0x6c/0x300
 ? debug_smp_processor_id+0x1b/0x30
 kernel_init_freeable+0x2b9/0x540
 ? __pfx_kernel_init+0x10/0x10
 kernel_init+0x1f/0x150
 ret_from_fork+0x40/0x50
 ? __pfx_kernel_init+0x10/0x10
 ret_from_fork_asm+0x1b/0x30
 </TASK>

The previous patch fixes this by using the deadlock-safe best-effort
version of find_vm_area.  However, in case of failure print the fact that
the pointer was a vmalloc pointer so that we print at least something.

Link: https://lkml.kernel.org/r/20230904180806.1002832-2-joel@joelfernandes.org
Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl

commit 358040e3807754944dbddf948a23c6d914297ed7 upstream.

The update of rate_num/den and msbits were factored out to
fixup_unreferenced_params() function to be called explicitly after the
hw_refine or hw_params procedure.  It's called from
snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl.
This ended up with the incomplete rate_num/den and msbits parameters
when 32bit compat ioctl is used.

This patch adds the missing call in snd_pcm_ioctl_hw_params_compat().

Reported-by: Meng_Cai@novatek.com.cn
Fixes: f9a076bff053 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230829134344.31588-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Fix leak in devfreq_dev_release()

commit 5693d077595de721f9ddbf9d37f40e5409707dfe upstream.

srcu_init_notifier_head() allocates resources that need to be released
with a srcu_cleanup_notifier_head() call.

Reported by kmemleak.

Fixes: 0fe3a66410a3 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: set max size RX buffer when store bad packet is enabled

commit bb5ed01cd2428cd25b1c88a3a9cba87055eb289f upstream.

Increase the RX buffer size to 3K when the SBP bit is on. The size of
the RX buffer determines the number of pages allocated which may not
be sufficient for receive frames larger than the set MTU size.

Cc: stable@vger.kernel.org
Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.")
Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: skb_segment, Call zero copy functions before using skbuff frags

commit 2ea35288c83b3d501a88bc17f2df8f176b5cc96f upstream.

Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.

[  193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc
[  193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G           O      5.15.123+ #26
[  193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0
[  194.021892] Call Trace:
[  194.027422]  <TASK>
[  194.072861]  tcp_gso_segment+0x107/0x540
[  194.082031]  inet_gso_segment+0x15c/0x3d0
[  194.090783]  skb_mac_gso_segment+0x9f/0x110
[  194.095016]  __skb_gso_segment+0xc1/0x190
[  194.103131]  netem_enqueue+0x290/0xb10 [sch_netem]
[  194.107071]  dev_qdisc_enqueue+0x16/0x70
[  194.110884]  __dev_queue_xmit+0x63b/0xb30
[  194.121670]  bond_start_xmit+0x159/0x380 [bonding]
[  194.128506]  dev_hard_start_xmit+0xc3/0x1e0
[  194.131787]  __dev_queue_xmit+0x8a0/0xb30
[  194.138225]  macvlan_start_xmit+0x4f/0x100 [macvlan]
[  194.141477]  dev_hard_start_xmit+0xc3/0x1e0
[  194.144622]  sch_direct_xmit+0xe3/0x280
[  194.147748]  __dev_queue_xmit+0x54a/0xb30
[  194.154131]  tap_get_user+0x2a8/0x9c0 [tap]
[  194.157358]  tap_sendmsg+0x52/0x8e0 [tap]
[  194.167049]  handle_tx_zerocopy+0x14e/0x4c0 [vhost_net]
[  194.173631]  handle_tx+0xcd/0xe0 [vhost_net]
[  194.176959]  vhost_worker+0x76/0xb0 [vhost]
[  194.183667]  kthread+0x118/0x140
[  194.190358]  ret_from_fork+0x1f/0x30
[  194.193670]  </TASK>

In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.

Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reported-by: Amit Goyal <agoyal@purestorage.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_sctp: validate the flag_info count

commit e99476497687ef9e850748fe6d232264f30bc8f9 upstream.

sctp_mt_check doesn't validate the flag_count field. An attacker can
take advantage of that to trigger a OOB read and leak memory
information.

Add the field validation in the checkentry function.

Fixes: 2e4e6a17af35 ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables")
Cc: stable@vger.kernel.org
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_u32: validate user space input

commit 69c5d284f67089b4750d28ff6ac6f52ec224b330 upstream.

The xt_u32 module doesn't validate the fields in the xt_u32 structure.
An attacker may take advantage of this to trigger an OOB read by setting
the size fields with a value beyond the arrays boundaries.

Add a checkentry function to validate the structure.

This was originally reported by the ZDI project (ZDI-CAN-18408).

Fixes: 1b50b8a371e9 ("[NETFILTER]: Add u32 match")
Cc: stable@vger.kernel.org
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_exthdr: Fix non-linear header modification

commit 28427f368f0e08d504ed06e74bc7cc79d6d06511 upstream.

Fix skb_ensure_writable() size. Don't use nft_tcp_header_pointer() to
make it explicit that pointers point to the packet (not local buffer).

Fixes: 99d1712bc41c ("netfilter: exthdr: tcp option set support")
Fixes: 7890cbea66e7 ("netfilter: exthdr: add support for tcp option removal")
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c

commit 050d91c03b28ca479df13dfb02bcd2c60dd6a878 upstream.

The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.

Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

commit c3b704d4a4a265660e665df51b129e8425216ed1 upstream.

This is a follow up of commit 915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.

Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.

Fixes: 57e1ab6eaddc ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_ring: fix avail_wrap_counter in virtqueue_add_packed

[ Upstream commit 1acfe2c1225899eab5ab724c91b7e1eb2881b9ab ]

In current packed virtqueue implementation, the avail_wrap_counter won't
flip, in the case when the driver supplies a descriptor chain with a
length equals to the queue size; total_sg == vq->packed.vring.num.

Let’s assume the following situation:
vq->packed.vring.num=4
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0

Then the driver adds a descriptor chain containing 4 descriptors.

We expect the following result with avail_wrap_counter flipped:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 1

But, the current implementation gives the following result:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0

To reproduce the bug, you can set a packed queue size as small as
possible, so that the driver is more likely to provide a descriptor
chain with a length equal to the packed queue size. For example, in
qemu run following commands:
sudo qemu-system-x86_64 \
-enable-kvm \
-nographic \
-kernel "path/to/kernel_image" \
-m 1G \
-drive file="path/to/rootfs",if=none,id=disk \
-device virtio-blk,drive=disk \
-drive file="path/to/disk_image",if=none,id=rwdisk \
-device virtio-blk,drive=rwdisk,packed=on,queue-size=4,\
indirect_desc=off \
-append "console=ttyS0 root=/dev/vda rw init=/bin/bash"

Inside the VM, create a directory and mount the rwdisk device on it. The
rwdisk will hang and mount operation will not complete.

This commit fixes the wrap counter error by flipping the
packed.avail_wrap_counter, when start of descriptor chain equals to the
end of descriptor chain (head == i).

Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support")
Signed-off-by: Yuan Yao <yuanyaogoog@chromium.org>
Message-Id: <20230808051110.3492693-1-yuanyaogoog@chromium.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Fix the race condition while updating the transition_task of policy

[ Upstream commit 61bfbf7951ba561dcbdd5357702d3cbc2d447812 ]

The field 'transition_task' of policy structure is used to track the
task which is performing the frequency transition. Using this field to
print a warning once detect a case where the same task is calling
_begin() again before completing the preivous frequency transition via
the _end().

However, there is a potential race condition in _end() and _begin() APIs
while updating the field 'transition_task' of policy, the scenario is
depicted below:

             Task A                            Task B

        /* 1st freq transition */
        Invoke _begin() {
                ...
                ...
        }
                                        /* 2nd freq transition */
                                        Invoke _begin() {
                                                ... //waiting for A to
                                                ... //clear
                                                ... //transition_ongoing
                                                ... //in _end() for
                                                ... //the 1st transition
                                                        |
        Change the frequency                            |
                                                        |
        Invoke _end() {                                 |
                ...                                     |
                ...                                     |
                transition_ongoing = false;             V
                                                transition_ongoing = true;
                                                transition_task = current;
                transition_task = NULL;
                ... //A overwrites the task
                ... //performing the transition
                ... //result in error warning.
        }

To fix this race condition, the transition_lock of policy structure is
now acquired before updating policy structure in _end() API. Which ensure
that only one task can update the 'transition_task' field at a time.

Link: https://lore.kernel.org/all/b3c61d8a-d52d-3136-fbf0-d1de9f1ba411@huawei.com/
Fixes: ca654dc3a93d ("cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Drivers: hv: vmbus: Don't dereference ACPI root object handle

[ Upstream commit 78e04bbff849b51b56f5925b1945db2c6e128b61 ]

Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.

However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).

This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.

I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.

Fix this by explicitly terminating the lookup at the ACPI namespace root
object.

Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.

Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]

Fixes: 7f163a6fd957 ("drivers:hv: Modify hv_vmbus to search for all MMIO ranges available.")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/fd8e64ceeecfd1d95ff49021080cf699e88dbbde.1691606267.git.maciej.szmigiero@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ste_dma40: Add missing IRQ check in d40_probe

[ Upstream commit c05ce6907b3d6e148b70f0bb5eafd61dcef1ddc1 ]

Check for the return value of platform_get_irq(): if no interrupt
is specified, it wouldn't make sense to call request_irq().

Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230724144108.2582917-1-ruanjinjie@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Fix hostaudio build errors

[ Upstream commit db4bfcba7bb8d10f00bba2a3da6b9a9c2a1d7b71 ]

Use "select" to ensure that the required kconfig symbols are set
as expected.
Drop HOSTAUDIO since it is now equivalent to UML_SOUND.

Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the
status quo of the default configs.

Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a
kconfig warning for unmet dependencies. (This was not an issue when
SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig
builds and didn't find any issues.)

This fixes build errors when CONFIG_SOUND is not set:

ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module':
hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer'
ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp'
ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module':
hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp'
ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer'
ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp'

and this kconfig warning:
WARNING: unmet direct dependencies detected for SOUND

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: d886e87cb82b ("sound: make OSS sound core optional")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: linux-kbuild@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()

[ Upstream commit a5a88125d00612586e941ae13e7fcf36ba8f18a7 ]

In fsmc_nand_resume(), the return value of clk_prepare_enable() should be
checked since it might fail.

Fixes: e25da1c07dfb ("mtd: fsmc_nand: Add clk_{un}prepare() support")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230817115839.10192-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: Check bus width while setting QE bit

[ Upstream commit f01d8155a92e33cdaa85d20bfbe6c441907b3c1f ]

spi_nor_write_16bit_sr_and_check() should also check if bus width is
4 before setting QE bit.

Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Suggested-by: Michael Walle <michael@walle.cc>
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230818064524.1229100-2-hsinyi@chromium.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead

[ Upstream commit 730094577e0c37e1bc40be37cbd41f71b0a8a2a4 ]

The tty LED trigger uses the obsolete LED_ON & LED_OFF constants when
setting LED brightness. This is bad because the LED_ON constant is equal
to 1, and so when activating the tty LED trigger on a LED class device
with max_brightness greater than 1, the LED is dimmer than it can be
(when max_brightness is 255, the LED is very dimm indeed; some devices
translate 1/255 to 0, so the LED is OFF all the time).

Instead of directly setting brightness to a specific value, use the
led_blink_set_oneshot() function from LED core to configure the blink.
This function takes the current configured brightness as blink
brightness if not zero, and max brightness otherwise.

This also changes the behavior of the TTY LED trigger. Previously if
rx/tx stats kept changing, the LED was ON all the time they kept
changing. With this patch the LED will blink on TTY activity.

Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230802090753.13611-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false

[ Upstream commit c3f853184bed04105682383c2971798c572226b5 ]

At the time we call
    BUG_ON(props.color == LED_COLOR_ID_MULTI);
the props variable is still initialized to zero.

Call the BUG_ON only after we parse fwnode into props.

Fixes: 77dce3a22e89 ("leds: disallow /sys/class/leds/*:multi:* for now")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801151623.30387-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: multicolor: Use rounded division when calculating color components

[ Upstream commit 065d099f1be58187e6629273c50b948a02b7e1bf ]

Given channel intensity, LED brightness and max LED brightness, the
multicolor LED framework helper led_mc_calc_color_components() computes
the color channel brightness as

    chan_brightness = brightness * chan_intensity / max_brightness

Consider the situation when (brightness, intensity, max_brightness) is
for example (16, 15, 255), then chan_brightness is computed to 0
although the fractional divison would give 0.94, which should be rounded
to 1.

Use DIV_ROUND_CLOSEST here for the division to give more realistic
component computation:

    chan_brightness = DIV_ROUND_CLOSEST(brightness * chan_intensity,
                                        max_brightness)

Fixes: 55d5d3b46b08 ("leds: multicolor: Introduce a multicolor class definition")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801124931.8661-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: pwm: Fix error code in led_pwm_create_fwnode()

[ Upstream commit cadb2de2a7fd9e955381307de3eddfcc386c208e ]

Negative -EINVAL was intended, not positive EINVAL.  Fix it.

Fixes: 95138e01275e ("leds: pwm: Make error handling more robust")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/a33b981a-b2c4-4dc2-b00a-626a090d2f11@moroto.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rpmsg: glink: Add check for kstrdup

[ Upstream commit b5c9ee8296a3760760c7b5d2e305f91412adc795 ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230619030631.12361-1-jiasheng@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write

[ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ]

inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.

Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate

[ Upstream commit d5ef343c1d62bc4c4c2c393af654a41cb34b449f ]

inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.

Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328

[ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ]

inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro
when configuring vco_div_5 on RK3328.

Fix this by using correct vco_div_5 macro for RK3328.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Modify the dependence of attribute pasid_enabled

[ Upstream commit 50c5e6f41d5ad7c731c31135a30d0e4f0e4fea26 ]

Kernel PASID and user PASID are separately enabled. User needs to know the
user PASID enabling status to decide how to use IDXD device in user space.
This is done via the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
It's unnecessary for user to know the kernel PASID enabling status because
user won't use the kernel PASID. But instead of showing the user PASID
enabling status, the attribute shows the kernel PASID enabling status. Fix
the issue by showing the user PASID enabling status in the attribute.

Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062706.1743078-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: brcmnand: Fix mtd oobsize

[ Upstream commit 60177390fa061c62d156f4a546e3efd90df3c183 ]

brcmnand controller can only access the flash spare area up to certain
bytes based on the ECC level. It can be less than the actual flash spare
area size. For example, for many NAND chip supporting ECC BCH-8, it has
226 bytes spare area. But controller can only uses 218 bytes. So brcmand
driver overrides the mtd oobsize with the controller's accessible spare
area size. When the nand base driver utilizes the nand_device object, it
resets the oobsize back to the actual flash spare aprea size from
nand_memory_organization structure and controller may not able to access
all the oob area as mtd advises.

This change fixes the issue by overriding the oobsize in the
nand_memory_organization structure to the controller's accessible spare
area size.

Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-6-william.zhang@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix race issue between cpu buffer write and swap

[ Upstream commit 3163f635b20e9e1fb4659e74f47918c9dddfe64e ]

Warning happened in rb_end_commit() at code:
if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)))

  WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142
rb_commit+0x402/0x4a0
  Call Trace:
   ring_buffer_unlock_commit+0x42/0x250
   trace_buffer_unlock_commit_regs+0x3b/0x250
   trace_event_buffer_commit+0xe5/0x440
   trace_event_buffer_reserve+0x11c/0x150
   trace_event_raw_event_sched_switch+0x23c/0x2c0
   __traceiter_sched_switch+0x59/0x80
   __schedule+0x72b/0x1580
   schedule+0x92/0x120
   worker_thread+0xa0/0x6f0

It is because the race between writing event into cpu buffer and swapping
cpu buffer through file per_cpu/cpu0/snapshot:

  Write on CPU 0             Swap buffer by per_cpu/cpu0/snapshot on CPU 1
  --------                   --------
                             tracing_snapshot_write()
                               [...]

  ring_buffer_lock_reserve()
    cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a';
    [...]
    rb_reserve_next_event()
      [...]

                               ring_buffer_swap_cpu()
                                 if (local_read(&cpu_buffer_a->committing))
                                     goto out_dec;
                                 if (local_read(&cpu_buffer_b->committing))
                                     goto out_dec;
                                 buffer_a->buffers[cpu] = cpu_buffer_b;
                                 buffer_b->buffers[cpu] = cpu_buffer_a;
                                 // 2. cpu_buffer has swapped here.

      rb_start_commit(cpu_buffer);
      if (unlikely(READ_ONCE(cpu_buffer->buffer)
          != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer'
        [...]           //    has not changed here.
        return NULL;
      }
                                 cpu_buffer_b->buffer = buffer_a;
                                 cpu_buffer_a->buffer = buffer_b;
                                 [...]

      // 4. Reserve event from 'cpu_buffer_a'.

  ring_buffer_unlock_commit()
    [...]
    cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!!
    rb_commit(cpu_buffer)
      rb_end_commit()  // 6. WARN for the wrong 'committing' state !!!

Based on above analysis, we can easily reproduce by following testcase:
  ``` bash
  #!/bin/bash

  dmesg -n 7
  sysctl -w kernel.panic_on_warn=1
  TR=/sys/kernel/tracing
  echo 7 > ${TR}/buffer_size_kb
  echo "sched:sched_switch" > ${TR}/set_event
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  ```

To fix it, IIUC, we can use smp_call_function_single() to do the swap on
the target cpu where the buffer is located, so that above race would be
avoided.

Link: https://lore.kernel.org/linux-trace-kernel/20230831132739.4070878-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: f1affcaaa861 ("tracing: Add snapshot in the per_cpu trace directories")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Remove extra space at the end of hwlat_detector/mode

[ Upstream commit 2cf0dee989a8b2501929eaab29473b6b1fa11057 ]

Space is printed after each mode value including the last one:
$ echo \"$(sudo cat /sys/kernel/tracing/hwlat_detector/mode)\"
"none [round-robin] per-cpu "

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://lore.kernel.org/linux-trace-kernel/20230825103432.7750-1-m.kobuk@ispras.ru
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 8fa826b7344d ("trace/hwlat: Implement the mode config option")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/speculation: Mark all Skylake CPUs as vulnerable to GDS

[ Upstream commit c9f4c45c8ec3f07f4f083f9750032a1ec3eab6b2 ]

The Gather Data Sampling (GDS) vulnerability is common to all Skylake
processors.  However, the "client" Skylakes* are now in this list:

https://www.intel.com/content/www/us/en/support/articles/000022396/processors.html

which means they are no longer included for new vulnerabilities here:

https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html

or in other GDS documentation.  Thus, they were not included in the
original GDS mitigation patches.

Mark SKYLAKE and SKYLAKE_L as vulnerable to GDS to match all the
other Skylake CPUs (which include Kaby Lake).  Also group the CPUs
so that the ones that share the exact same vulnerabilities are next
to each other.

Last, move SRBDS to the end of each line.  This makes it clear at a
glance that SKYLAKE_X is unique.  Of the five Skylakes, it is the
only "server" CPU and has a different implementation from the
clients of the "special register" hardware, making it immune to SRBDS.

This makes the diff much harder to read, but the resulting table is
worth it.

I very much appreciate the report from Michael Zhivich about this
issue.  Despite what level of support a hardware vendor is providing,
the kernel very much needs an accurate and up-to-date list of
vulnerable CPUs.  More reports like this are very welcome.

* Client Skylakes are CPUID 406E3/506E3 which is family 6, models
  0x4E and 0x5E, aka INTEL_FAM6_SKYLAKE and INTEL_FAM6_SKYLAKE_L.

Reported-by: Michael Zhivich <mzhivich@akamai.com>
Fixes: 8974eb588283 ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tick/rcu: Fix false positive "softirq work is pending" messages

[ Upstream commit 96c1fa04f089a7e977a44e4e8fdc92e81be20bef ]

In commit 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.

In doing so, the code essentially went from a one conditional:

if (a && b && c)
warn();

to a three conditional:

if (!a)
return;
if (!b)
return;
if (!c)
return;
warn();

But that conversion got the condition for the RT specific
local_bh_blocked() wrong. The original condition was:

    !local_bh_blocked()

but the conversion failed to negate it so it ended up as:

        if (!local_bh_blocked())
return false;

This issue lay dormant until another fixup for the same commit was added
in commit a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition").
This commit realized the ratelimit was essentially set to zero instead
of ten, and hence *no* softirq pending messages would ever be issued.

Once this commit was backported via linux-stable, both the v6.1 and v6.4
preempt-rt kernels started printing out 10 instances of this at boot:

  NOHZ tick-stop error: local softirq work is pending, handler #80!!!

Remove the negation and return when local_bh_blocked() evaluates to true to
bring the correct behaviour back.

Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Wen Yang <wenyang.linux@foxmail.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230818200757.1808398-1-paul.gortmaker@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/amd/pmf: Fix a missing cleanup path

[ Upstream commit 4dbd6e61adc7e52dd1c9165f0ccaa90806611e40 ]

On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.

This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.

Add the missing cleanup path.

Fixes: 33c9ab5b493a ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Correct devm device reference for hidinput input_dev name

[ Upstream commit 4794394635293a3e74591351fff469cea7ad15a2 ]

Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.

Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.

Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: c08d46aa805b ("HID: multitouch: devm conversion")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-3-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: uclogic: Correct devm device reference for hidinput input_dev name

[ Upstream commit dd613a4e45f8d35f49a63a2064e5308fa5619e29 ]

Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.

Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.

Reported-by: syzbot+3a0ebe8a52b89c63739d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/
Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: cce2dbdf258e ("HID: uclogic: name the input nodes based on their tool")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-2-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()

[ Upstream commit 6f20d3261265885f6a6be4cda49d7019728760e0 ]

Presently, if a call to logi_dj_recv_send_report() fails, we do
not learn about the error until after sending short
HID_OUTPUT_REPORT with hid_hw_raw_request().
To handle this somewhat unlikely issue, return on error in
logi_dj_recv_send_report() (minding ugly sleep workaround) and
take into account the result of hid_hw_raw_request().

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 6a9ddc897883 ("HID: logitech-dj: enable notifications on connect/disconnect")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230613101635.77820-1-n.zhandarovich@fintech.ru
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/efa: Fix wrong resources deallocation order

[ Upstream commit dc202c57e9a1423aed528e4b8dc949509cd32191 ]

When trying to destroy QP or CQ, we first decrease the refcount and
potentially free memory regions allocated for the object and then
request the device to destroy the object. If the device fails, the
object isn't fully destroyed so the user/IB core can try to destroy the
object again which will lead to underflow when trying to decrease an
already zeroed refcount.

Deallocate resources in reverse order of allocating them to safely free
them.

Fixes: ff6629f88c52 ("RDMA/efa: Do not delay freeing of DMA pages")
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://lore.kernel.org/r/20230822082725.31719-1-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Correct wrong debug message

[ Upstream commit bee024d20451e4ce04ea30099cad09f7f75d288b ]

We need to print num_sle first then pbl->max_buf per the condition.
Also replace mem->pbl with pbl while at it.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230821133255.31111-3-guoqing.jiang@linux.dev
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Balance the reference of cep->kref in the error path

[ Upstream commit b056327bee09e6b86683d3f709a438ccd6031d72 ]

The siw_connect can go to err in below after cep is allocated successfully:

1. If siw_cm_alloc_work returns failure. In this case socket is not
assoicated with cep so siw_cep_put can't be called by siw_socket_disassoc.
We need to call siw_cep_put twice since cep->kref is increased once after
it was initialized.

2. If siw_cm_queue_work can't find a work, which means siw_cep_get is not
called in siw_cm_queue_work, so cep->kref is increased twice by siw_cep_get
and when associate socket with cep after it was initialized. So we need to
call siw_cep_put three times (one in siw_socket_disassoc).

3. siw_send_mpareqrep returns error, this scenario is similar as 2.

So we need to remove one siw_cep_put in the error path.

Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230821133255.31111-2-guoqing.jiang@linux.dev
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "IB/isert: Fix incorrect release of isert connection"

[ Upstream commit dfe261107c080709459c32695847eec96238852b ]

Commit: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") is
causing problems on OPA when DEVICE_REMOVAL is happening.

 ------------[ cut here ]------------
 WARNING: CPU: 52 PID: 2117247 at drivers/infiniband/core/cq.c:359
ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
 Modules linked in: nfsd nfs_acl target_core_user uio tcm_fc libfc
scsi_transport_fc tcm_loop target_core_pscsi target_core_iblock target_core_file
rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs
rfkill rpcrdma rdma_ucm ib_srpt sunrpc ib_isert iscsi_target_mod target_core_mod
opa_vnic ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm
ib_cm hfi1(-) rdmavt ib_uverbs intel_rapl_msr intel_rapl_common sb_edac ib_core
x86_pkg_temp_thermal intel_powerclamp coretemp i2c_i801 mxm_wmi rapl iTCO_wdt
ipmi_si iTCO_vendor_support mei_me ipmi_devintf mei intel_cstate ioatdma
intel_uncore i2c_smbus joydev pcspkr lpc_ich ipmi_msghandler acpi_power_meter
acpi_pad xfs libcrc32c sr_mod sd_mod cdrom t10_pi sg crct10dif_pclmul
crc32_pclmul crc32c_intel drm_kms_helper drm_shmem_helper ahci libahci
ghash_clmulni_intel igb drm libata dca i2c_algo_bit wmi fuse
 CPU: 52 PID: 2117247 Comm: modprobe Not tainted 6.5.0-rc1+ #1
 Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS
SE5C610.86B.01.01.0014.121820151719 12/18/2015
 RIP: 0010:ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
 Code: ff 48 8b 43 40 48 8d 7b 40 48 83 e8 40 4c 39 e7 75 b3 49 83
c4 10 4d 39 fc 75 94 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc <0f> 0b eb a1
90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f
 RSP: 0018:ffffc10bea13fc80 EFLAGS: 00010206
 RAX: 000000000000010c RBX: ffff9bf5c7e66c00 RCX: 000000008020001d
 RDX: 000000008020001e RSI: fffff175221f9900 RDI: ffff9bf5c7e67640
 RBP: ffff9bf5c7e67600 R08: ffff9bf5c7e64400 R09: 000000008020001d
 R10: 0000000040000000 R11: 0000000000000000 R12: ffff9bee4b1e8a18
 R13: dead000000000122 R14: dead000000000100 R15: ffff9bee4b1e8a38
 FS:  00007ff1e6d38740(0000) GS:ffff9bfd9fb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00005652044ecc68 CR3: 0000000889b5c005 CR4: 00000000001706e0
 Call Trace:
  <TASK>
  ? __warn+0x80/0x130
  ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
  ? report_bug+0x195/0x1a0
  ? handle_bug+0x3c/0x70
  ? exc_invalid_op+0x14/0x70
  ? asm_exc_invalid_op+0x16/0x20
  ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
  disable_device+0x9d/0x160 [ib_core]
  __ib_unregister_device+0x42/0xb0 [ib_core]
  ib_unregister_device+0x22/0x30 [ib_core]
  rvt_unregister_device+0x20/0x90 [rdmavt]
  hfi1_unregister_ib_device+0x16/0xf0 [hfi1]
  remove_one+0x55/0x1a0 [hfi1]
  pci_device_remove+0x36/0xa0
  device_release_driver_internal+0x193/0x200
  driver_detach+0x44/0x90
  bus_remove_driver+0x69/0xf0
  pci_unregister_driver+0x2a/0xb0
  hfi1_mod_cleanup+0xc/0x3c [hfi1]
  __do_sys_delete_module.constprop.0+0x17a/0x2f0
  ? exit_to_user_mode_prepare+0xc4/0xd0
  ? syscall_trace_enter.constprop.0+0x126/0x1a0
  do_syscall_64+0x5c/0x90
  ? syscall_exit_to_user_mode+0x12/0x30
  ? do_syscall_64+0x69/0x90
  ? syscall_exit_work+0x103/0x130
  ? syscall_exit_to_user_mode+0x12/0x30
  ? do_syscall_64+0x69/0x90
  ? exc_page_fault+0x65/0x150
  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
 RIP: 0033:0x7ff1e643f5ab
 Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3
66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0
ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48
 RSP: 002b:00007ffec9103cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
 RAX: ffffffffffffffda RBX: 00005615267fdc50 RCX: 00007ff1e643f5ab
 RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005615267fdcb8
 RBP: 00005615267fdc50 R08: 0000000000000000 R09: 0000000000000000
 R10: 00007ff1e659eac0 R11: 0000000000000206 R12: 00005615267fdcb8
 R13: 0000000000000000 R14: 00005615267fdcb8 R15: 00007ffec9105ff8
  </TASK>
 ---[ end trace 0000000000000000 ]---

And...

 restrack: ------------[ cut here ]------------
 infiniband hfi1_0: BUG: RESTRACK detected leak of resources
 restrack: Kernel PD object allocated by ib_isert is not freed
 restrack: Kernel CQ object allocated by ib_core is not freed
 restrack: Kernel QP object allocated by rdma_cm is not freed
 restrack: ------------[ cut here ]------------

Fixes: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection")
Reported-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Closes: https://lore.kernel.org/all/921cd1d9-2879-f455-1f50-0053fe6a6655@cornelisnetworks.com
Link: https://lore.kernel.org/r/a27982d3235005c58f6d321f3fad5eb6e1beaf9e.1692604607.git.leonro@nvidia.com
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amba: bus: fix refcount leak

[ Upstream commit e312cbdc11305568554a9e18a2ea5c2492c183f3 ]

commit 5de1540b7bc4 ("drivers/amba: create devices from device tree")
increases the refcount of of_node, but not releases it in
amba_device_release, so there is refcount leak. By using of_node_put
to avoid refcount leak.

Fixes: 5de1540b7bc4 ("drivers/amba: create devices from device tree")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230821023928.3324283-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: tegra: handle clk prepare error in tegra_uart_hw_init()

[ Upstream commit 5abd01145d0cc6cd1b7c2fe6ee0b9ea0fa13671e ]

In tegra_uart_hw_init(), the return value of clk_prepare_enable() should
be checked since it might fail.

Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: bcm-voter: Use enable_maks for keepalive voting

[ Upstream commit 1a70ca71547be051769f0628aa09717694f508f0 ]

BCMs with an enable_mask expect to only have that specific value written
to them. The current implementation only works by miracle for BCMs with
enable mask == BIT(0), as the minimal vote we've been using so far just
so happens to be equal to that.

Use the correct value with keepalive voting.

Fixes: d8630f050d3f ("interconnect: qcom: Add support for mask-based BCMs")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-2-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: bcm-voter: Improve enable_mask handling

[ Upstream commit a1f4170dec440f023601d57e49227b784074d218 ]

We don't need all the complex arithmetic for BCMs utilizing enable_mask,
as all we need to do is to determine whether there's any user (or
keepalive) asking for it to be on.

Separate the logic for such BCMs for a small speed boost.

Suggested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-1-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 1a70ca71547b ("interconnect: qcom: bcm-voter: Use enable_maks for keepalive voting")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8450: Enable sync_state

[ Upstream commit 16862f1b2110eca6330e5be6d804e1a08e06a202 ]

Enable sync_state on sm8450 so that the interconnect votes actually mean
anything and aren't just pinned to INT_MAX.

Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_syncstate-v1-1-69ae5552a18b@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock

[ Upstream commit 1a1975551943f681772720f639ff42fbaa746212 ]

There is a long call chain that &fip->ctlr_lock is acquired by isr
fnic_isr_msix_wq_copy() under hard IRQ context. Thus other process context
code acquiring the lock should disable IRQ, otherwise deadlock could happen
if the IRQ preempts the execution while the lock is held in process context
on the same CPU.

[ISR]
fnic_isr_msix_wq_copy()
 -> fnic_wq_copy_cmpl_handler()
 -> fnic_fcpio_cmpl_handler()
 -> fnic_fcpio_flogi_reg_cmpl_handler()
 -> fnic_flush_tx()
 -> fnic_send_frame()
 -> fcoe_ctlr_els_send()
 -> spin_lock_bh(&fip->ctlr_lock)

[Process Context]
1. fcoe_ctlr_timer_work()
 -> fcoe_ctlr_flogi_send()
 -> spin_lock_bh(&fip->ctlr_lock)

2. fcoe_ctlr_recv_work()
 -> fcoe_ctlr_recv_handler()
 -> fcoe_ctlr_recv_els()
 -> fcoe_ctlr_announce()
 -> spin_lock_bh(&fip->ctlr_lock)

3. fcoe_ctlr_recv_work()
 -> fcoe_ctlr_recv_handler()
 -> fcoe_ctlr_recv_els()
 -> fcoe_ctlr_flogi_retry()
 -> spin_lock_bh(&fip->ctlr_lock)

4. -> fcoe_xmit()
 -> fcoe_ctlr_els_send()
 -> spin_lock_bh(&fip->ctlr_lock)

spin_lock_bh() is not enough since fnic_isr_msix_wq_copy() is a
hardirq.

These flaws were found by an experimental static analysis tool I am
developing for irq-related deadlock.

The patch fix the potential deadlocks by spin_lock_irqsave() to disable
hard irq.

Fixes: 794d98e77f59 ("[SCSI] libfcoe: retry rejected FLOGI to another FCF if possible")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230817074708.7509-1-dg573847474@gmail.com
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Use 32-bit hostnum in scsi_host_lookup()

[ Upstream commit 62ec2092095b678ff89ce4ba51c2938cd1e8e630 ]

Change scsi_host_lookup() hostnum argument type from unsigned short to
unsigned int to match the type used everywhere else.

Fixes: 6d49f63b415c ("[SCSI] Make host_no an unsigned int")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://lore.kernel.org/r/a02497e7-c12b-ef15-47fc-3f0a0b00ffce@cybernetics.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Prevent zero-length STAG registration

[ Upstream commit bb6d73d9add68ad270888db327514384dfa44958 ]

Currently irdma allows zero-length STAGs to be programmed in HW during
the kernel mode fast register flow. Zero-length MR or STAG registration
disable HW memory length checks.

Improve gaps in bounds checking in irdma by preventing zero-length STAG or
MR registrations except if the IB_PD_UNSAFE_GLOBAL_RKEY is set.

This addresses the disclosure CVE-2023-25775.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Christopher Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230818144838.1758-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: trbe: Fix TRBE potential sleep in atomic context

[ Upstream commit c0a232f1e19e378c5c4e5973a996392942c80090 ]

smp_call_function_single() will allocate an IPI interrupt vector to
the target processor and send a function call request to the interrupt
vector. After the target processor receives the IPI interrupt, it will
execute arm_trbe_remove_coresight_cpu() call request in the interrupt
handler.

According to the device_unregister() stack information, if other process
is useing the device, the down_write() may sleep, and trigger deadlocks
or unexpected errors.

  arm_trbe_remove_coresight_cpu
    coresight_unregister
      device_unregister
        device_del
          kobject_del
            __kobject_del
              sysfs_remove_dir
                kernfs_remove
                  down_write ---------> it may sleep

Add a helper arm_trbe_disable_cpu() to disable TRBE precpu irq and reset
per TRBE.
Simply call arm_trbe_remove_coresight_cpu() directly without useing the
smp_call_function_single(), which is the same as registering the TRBE
coresight device.

Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230814093813.19152-2-hejunhao3@huawei.com
[ Remove duplicate cpumask checks during removal ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ v3 - Remove the operation of assigning NULL to cpudata->drvdata ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230818084052.10116-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup:namespace: Remove unused cgroup_namespaces_init()

[ Upstream commit 82b90b6c5b38e457c7081d50dff11ecbafc1e61a ]

cgroup_namspace_init() just return 0. Therefore, there is no need to
call it during start_kernel. Just remove it.

Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "f2fs: fix to do sanity check on extent cache correctly"

[ Upstream commit 958ccbbf1ce716d77c7cfa79ace50a421c1eed73 ]

syzbot reports a f2fs bug as below:

UBSAN: array-index-out-of-bounds in fs/f2fs/f2fs.h:3275:19
index 1409 is out of range for type '__le32[923]' (aka 'unsigned int[923]')
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
 ubsan_epilogue lib/ubsan.c:217 [inline]
 __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
 inline_data_addr fs/f2fs/f2fs.h:3275 [inline]
 __recover_inline_status fs/f2fs/inode.c:113 [inline]
 do_read_inode fs/f2fs/inode.c:480 [inline]
 f2fs_iget+0x4730/0x48b0 fs/f2fs/inode.c:604
 f2fs_fill_super+0x640e/0x80c0 fs/f2fs/super.c:4601
 mount_bdev+0x276/0x3b0 fs/super.c:1391
 legacy_get_tree+0xef/0x190 fs/fs_context.c:611
 vfs_get_tree+0x8c/0x270 fs/super.c:1519
 do_new_mount+0x28f/0xae0 fs/namespace.c:3335
 do_mount fs/namespace.c:3675 [inline]
 __do_sys_mount fs/namespace.c:3884 [inline]
 __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue was bisected to:

commit d48a7b3a72f121655d95b5157c32c7d555e44c05
Author: Chao Yu <chao@kernel.org>
Date:   Mon Jan 9 03:49:20 2023 +0000

    f2fs: fix to do sanity check on extent cache correctly

The root cause is we applied both v1 and v2 of the patch, v2 is the right
fix, so it needs to revert v1 in order to fix reported issue.

v1:
commit d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly")
https://lore.kernel.org/lkml/20230109034920.492914-1-chao@kernel.org/

v2:
commit 269d11948100 ("f2fs: fix to do sanity check on extent cache correctly")
https://lore.kernel.org/lkml/20230207134808.1827869-1-chao@kernel.org/

Reported-by: syzbot+601018296973a481f302@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000fcf0690600e4d04d@google.com/
Fixes: d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Only lfs mode is allowed with zoned block device feature

[ Upstream commit 2bd4df8fcbc72f58ce3c62ed021ab291ca42de0b ]

Now f2fs support four block allocation modes: lfs, adaptive,
fragment:segment, fragment:block. Only lfs mode is allowed with zoned block
device feature.

Fixes: 6691d940b0e0 ("f2fs: introduce fragment allocation mode mount option")
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: judge whether discard_unit is section only when have CONFIG_BLK_DEV_ZONED

[ Upstream commit b5a711acab305e04278c136c841ba37c589c16a1 ]

The current logic, regardless of whether CONFIG_BLK_DEV_ZONED
is enabled or not, will judge whether discard_unit is SECTION,
when f2fs_sb_has_blkzoned.

In fact, when CONFIG_BLK_DEV_ZONED is not enabled, this judgment
is a path that will never be accessed. At this time, -EINVAL will
be returned in the parse_options function, accompanied by the
message "Zoned block device support is not enabled".

Let's wrap this discard_unit judgment with CONFIG_BLK_DEV_ZONED.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 2bd4df8fcbc7 ("f2fs: Only lfs mode is allowed with zoned block device feature")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid mmap vs set_compress_option case

[ Upstream commit b5ab3276eb69cacf44ecfb11b2bfab73096ff4e4 ]

Compression option in inode should not be changed after they have
been used, however, it may happen in below race case:

Thread A Thread B
- f2fs_ioc_set_compress_option
 - check f2fs_is_mmap_file()
 - check get_dirty_pages()
 - check F2FS_HAS_BLOCKS()
- f2fs_file_mmap
 - set_inode_flag(FI_MMAP_FILE)
- fault
 - do_page_mkwrite
  - f2fs_vm_page_mkwrite
  - f2fs_get_block_locked
 - fault_dirty_shared_page
  - set_page_dirty
 - update i_compress_algorithm
 - update i_log_cluster_size
 - update i_cluster_size

Avoid such race condition by covering f2fs_file_mmap() w/ i_sem lock,
meanwhile add mmap file check condition in f2fs_may_compress() as well.

Fixes: e1e8debec656 ("f2fs: add F2FS_IOC_SET_COMPRESS_OPTION ioctl")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: rdacm21: Fix uninitialized value

[ Upstream commit 33c7ae8f49e3413c81e879e1fdfcea4c5516e37b ]

Fix the following smatch warning:

drivers/media/i2c/rdacm21.c:373 ov10640_check_id() error: uninitialized
symbol 'val'.

Initialize 'val' to 0 in the ov10640_check_id() function.

Fixes: 2b821698dc73 ("media: i2c: rdacm21: Power up OV10640 before OV490")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix regulators being left enabled on ov2680_power_on() errors

[ Upstream commit 84b4bd7e0d98166aa32fd470e672721190492eae ]

When the ov2680_power_on() "sensor soft reset failed" path is hit during
probe() the WARN() about putting an enabled regulator at
drivers/regulator/core.c:2398 triggers 3 times (once for each regulator),
filling dmesg with backtraces.

Fix this by properly disabling the regulators on ov2680_power_on() errors.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY not working

[ Upstream commit c0e97a4b4f20639f74cd5809b42ba6cbf9736a7d ]

ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY was getting
the try_fmt v4l2_mbus_framefmt struct from the passed in sd_state
and then storing the contents of that into the return by reference
format->format struct.

While the right thing to do would be filling format->format based on
the just looked up mode and then store the results of that in
sd_state->pads[0].try_fmt .

Before the previous change introducing ov2680_fill_format() this
resulted in ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY always
returning the zero-ed out sd_state->pads[0].try_fmt in format->format
breaking callers using this.

After the introduction of ov2680_fill_format() which at least
initializes sd_state->pads[0].try_fmt properly, format->format
is now always being filled with the default 800x600 mode set by
ov2680_init_cfg() independent of the actual requested mode.

Move the filling of format->format with ov2680_fill_format() to
before the if (which == V4L2_SUBDEV_FORMAT_TRY) and then store
the filled in format->format in sd_state->pads[0].try_fmt to
fix this.

Note this removes the fmt local variable because IMHO having a local
variable which points to a sub-struct of one of the function arguments
just leads to confusion when reading the code.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Add ov2680_fill_format() helper function

[ Upstream commit 6d6849b2203f3244b575ba01d3e41ee19aa2cadf ]

Add a ov2680_fill_format() helper function and use this everywhere were
a v4l2_mbus_framefmt struct needs to be filled in so that the driver always
fills it consistently.

This is a preparation patch for fixing ov2680_set_fmt()
which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in
the passed in v4l2_mbus_framefmt struct.

Note that for ov2680_init_cfg() this now simply always fills
the try_fmt struct of the passed in sd_state. This is correct because
ov2680_init_cfg() is never called with a NULL sd_state so the old
sd_state check is not necessary.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Don't take the lock for try_fmt calls

[ Upstream commit e521b9cc1a49de677f4fc65909ce4877fbf7b113 ]

On ov2680_set_fmt() calls with format->which == V4L2_SUBDEV_FORMAT_TRY,
ov2680_set_fmt() does not talk to the sensor.

So in this case there is no need to lock the sensor->lock mutex or
to check that the sensor is streaming.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Remove VIDEO_V4L2_SUBDEV_API ifdef-s

[ Upstream commit 49c282d5a8c5f4d1d9088622bec792294c716010 ]

VIDEO_V4L2_SUBDEV_API is now automatically selected in Kconfig
for all sensor drivers. Remove the ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
checks.

This is a preparation patch for fixing ov2680_set_fmt()
which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in
the passed in v4l2_mbus_framefmt struct.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix vflip / hflip set functions

[ Upstream commit d5d08ad330c9ccebc5e066fda815423a290f48b0 ]

ov2680_vflip_disable() / ov2680_hflip_disable() pass BIT(0) instead of
0 as value to ov2680_mod_reg().

While fixing this also:

1. Stop having separate enable/disable functions for hflip / vflip
2. Move the is_streaming check, which is unique to hflip / vflip
   into the ov2680_set_?flip() functions.

for a nice code cleanup.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix ov2680_bayer_order()

[ Upstream commit 50a7bad4e0a37d7018ab6fe843dd84bc6b2ecf72 ]

The index into ov2680_hv_flip_bayer_order[] should be 0-3, but
ov2680_bayer_order() was using 0 + BIT(2) + (BIT(2) << 1) as
max index, while the intention was to use: 0 + 1 + 2 as max index.

Fix the index calculation in ov2680_bayer_order(), while at it
also just use the ctrl values rather then reading them back using
a slow i2c-read transaction.

This also allows making the function void, since there now are
no more i2c-reads to error check.

Note the check for the ctrls being NULL is there to allow
adding an ov2680_fill_format() helper later, which will call
ov2680_set_bayer_order() during probe() before the ctrls are created.

[Sakari Ailus: Change all users of ov2680_set_bayer_order() here]

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Remove auto-gain and auto-exposure controls

[ Upstream commit 7b5a42e6ae71927359ea67a2c22570ba97fa4059 ]

Quoting the OV2680 datasheet:

"3.2 exposure and gain control

In the OV2680, the exposure time and gain are set manually from an external
controller. The OV2680 supports manual gain and exposure control only for
normal applications, no auto mode."

And indeed testing with the atomisp_ov2680 fork of ov2680.c has shown that
auto-exposure and auto-gain do not work.

Note that the code setting the auto-exposure flag was broken, callers
of ov2680_exposure_set() were directly passing !!ctrls->auto_exp->val as
"bool auto_exp" value, but ctrls->auto_exp is a menu control with:

enum  v4l2_exposure_auto_type {
        V4L2_EXPOSURE_AUTO = 0,
        V4L2_EXPOSURE_MANUAL = 1,
...

So instead of passing !!ctrls->auto_exp->val they should have been passing
ctrls->auto_exp->val == V4L2_EXPOSURE_AUTO, iow the passed value was
inverted of what it should have been.

Also remove ov2680_g_volatile_ctrl() since without auto support the gain
and exposure controls are not volatile.

This also fixes the control values not being properly applied in
ov2680_mode_set(). The 800x600 mode register-list also sets gain,
exposure and vflip overriding the last set ctrl values.

ov2680_mode_set() does call ov2680_gain_set() and ov2680_exposure_set()
but did this before writing the mode register-list, so these values
would still be overridden by the mode register-list.

Add a v4l2_ctrl_handler_setup() call after writing the mode register-list
to restore all ctrl values. Also remove the ctrls->gain->is_new check from
ov2680_gain_set() so that the gain always gets restored properly.

Last since ov2680_mode_set() now calls v4l2_ctrl_handler_setup(), remove
the v4l2_ctrl_handler_setup() call after ov2680_mode_restore() since
ov2680_mode_restore() calls ov2680_mode_set().

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov2680: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

[ Upstream commit 66274280b2c745d380508dc27b9a4dfd736e5eda ]

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 7b5a42e6ae71 ("media: ov2680: Remove auto-gain and auto-exposure controls")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Fix initial RESETB state and annotate timings

[ Upstream commit a210df337c5f5c2cd82f36c9dbb154ec63365c80 ]

The initial state of RESETB input signal of OV5640 should be
asserted, i.e. the sensor should be in reset. This is not the
case, make it so.

Since the subsequent assertion of RESETB signal is no longer
necessary and the timing of the power sequencing could be
slightly adjusted, add annotations to the delays which match
OV5640 datasheet rev. 2.03, both:
  figure 2-3 power up timing with internal DVDD
  figure 2-4 power up timing with external DVDD source

The 5..10ms delay between PWDN assertion and RESETB assertion
is not even documented in the power sequencing diagram, and
with this reset fix, it is no longer even necessary.

Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Enable MIPI interface in ov5640_set_power_mipi()

[ Upstream commit 98cb72d3b9c5e03b10fa993752ecfcbd9c572d8c ]

Set OV5640_REG_IO_MIPI_CTRL00 bit 2 to 1 instead of 0, since 1 means
MIPI CSI2 interface, while 0 means CPI parallel interface.

In the ov5640_set_power_mipi() the interface should obviously be set
to MIPI CSI2 since this functions is used to power up the sensor when
operated in MIPI CSI2 mode. The sensor should not be in CPI mode in
that case.

This fixes a corner case where capturing the first frame on i.MX8MN
with CSI/ISI resulted in corrupted frame.

Fixes: aa4bb8b8838f ("media: ov5640: Re-work MIPI startup sequence")
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> # [Test on imx6q]
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Jai Luthra <j-luthra@ti.com> # [Test on bplay, sk-am62]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: input: Support devices sending Eraser without Invert

[ Upstream commit 276e14e6c3993317257e1787e93b7166fbc30905 ]

Some digitizers (notably XP-Pen Artist 24) do not report the Invert
usage when erasing.  This causes the device to be permanently stuck with
the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only
usage that can release the tool.  In this state, Touch and Inrange are
no longer reported to userspace, rendering the pen unusable.

Prior to commit 87562fcd1342 ("HID: input: remove the need for
HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were
simply translated into BTN_TOUCH without causing an inconsistent state.

Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during
hidinput_configure_usage().  This quirk causes the tool to be released
as soon as Eraser is reported as not set.  Set BTN_TOOL_RUBBER in
input->keybit when mapping Eraser.

Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
Co-developed-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Illia Ostapyshyn <ostapyshyn@sra.uni-hannover.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: Free devm resources when unregistering a device

[ Upstream commit 699fb50d99039a50e7494de644f96c889279aca3 ]

In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.

This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.

We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.

This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.

This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.

Fixes: a525a3ddeaca ("driver core: free devres in device_release")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-3-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: gadget: f_mass_storage: Fix unused variable warning

[ Upstream commit 55c3e571d2a0aabef4f1354604443f1c415d2e85 ]

Fix a "variable set but not used" warning in f_mass_storage.c.  rc is
used if verbose debugging is enabled but not otherwise.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: d5e2b67aae79 ("USB: g_mass_storage: template f_mass_storage.c file created")
Link: https://lore.kernel.org/r/cfed16c7-aa46-494b-ba84-b0e0dc99be3a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>