Teodora Baluta [Fri, 18 Oct 2013 18:37:47 +0000 (21:37 +0300)]
staging: rtl8192u: fix sparse warning, make a function static
Fix the following sparse warning:
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c:240:22: warning: symbol 'ieee80211_alloc_txb' was not declared. Should it be static?
Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashvini Varatharaj [Sat, 19 Oct 2013 03:30:59 +0000 (09:00 +0530)]
Staging: speakup: removing jiffies comparison in speakup_apollo.c
Fix checkpatch warning: WARNING: Comparing jiffies is almost always
wrong; prefer time_after, time_before and friends
Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashvini Varatharaj [Sat, 19 Oct 2013 03:21:20 +0000 (08:51 +0530)]
Staging: speakup: removing jiffies comparison using time_after_eq()
Fix checkpatch warning: Comparing jiffies is almost always wrong;
prefer time_after, time_before and friends
Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 19 Oct 2013 12:16:34 +0000 (05:16 -0700)]
Merge tag 'iio-for-3.12d' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth round of IIO new drivers, functionality and cleanups for the 3.13 cycle.
New Drivers
* cm36651 combined RGB light and proximity sensor.
Core improvements
* Some more fixes and cleanups related to buffers. These include the second
half of a series which went is as fixes. The basis for delaying until the
next merge window is that some are too invasive for this late in a cycle
and others only effect code paths current unused in the mainline tree.
In this case we have:
* protecting against concurrent userspace access
* fixing a memory leak if a device goes away
* avoiding always reallocating the buffer whether or not it has changed
(a bug fix, but one with no functional changes other than a small speed
improvement.)
* Add reference counting for buffers to ensure they hang around if open
from userspace or in kernel when the device is forcefully removed.
* Return -ENODEV for buffer access operations when the device has gone
away.
* Add proper locking for iio_update_buffers (currently we only have one
buffer per device in mainline, but an input bridge driver is under
development which would make this bug 'real'.)
* Wake up anyone waiting on a buffer if the device is unregistered. A
subsequent read will fail, notifying userspace that the device is no
longer there rather than having it wait possibly for ever.
* Move the iio_sw_preenable functionality into the core. This avoids drivers
having to 'know' about how the buffers are implemented and is called by
almost all drivers anyway. Those that don't call it are not harmed by it
being called.
* New registration approach for information (i.e. sysfs attributes) about
events. Much more generic and now similar to how the equivalent is
handled for channel information. The events infrastructure had been left
behind by other changes so this brings it back in line.
* Using the new events registration approach, add a hysterisis event_info
element and apply this to those drivers with this property.
* A little unitialized variable bug in the generic_buffer.c example.
* Factor out the code for freeing lists of IIO Device attributes to avoid
some repitition.
Driver cleanups
* At91 driver gains touch screen support and some related fixes.
* Follow up series of patches removing the now redundant
iio_sw_buffer_preenable calls.
* Lots of conversions to the new event registration methods.
* Another round of hmc5843 cleanups as that driver moves towards graduating
from staging.
* Make some SoC drivers buildable if COMPILE_TEST is used. Follow up fixes
for a few bits and bobs that revealed.
* Add explicit includes of linux/of.h to those drivers making us of linux/of.h
Sachin Kamat [Fri, 18 Oct 2013 12:04:00 +0000 (13:04 +0100)]
iio: light: gp2ap020a00f: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Sachin Kamat [Fri, 18 Oct 2013 12:04:00 +0000 (13:04 +0100)]
iio: adc: ti-adc081c: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Sachin Kamat [Fri, 18 Oct 2013 12:04:00 +0000 (13:04 +0100)]
iio: adc: nau7802: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Sachin Kamat [Fri, 18 Oct 2013 12:04:00 +0000 (13:04 +0100)]
iio: adc: mcp3422: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Josh Wu [Tue, 8 Oct 2013 03:48:00 +0000 (04:48 +0100)]
iio: at91: introduce touch screen support in iio adc driver
AT91 ADC hardware integrate touch screen support. So this patch add touch
screen support for at91 adc iio driver.
To enable touch screen support in adc, you need to add the dt parameters:
1. which type of touch are used? (4 or 5 wires), sample period time.
2. correct pressure detect threshold value.
In the meantime, since touch screen will use a interal period trigger of adc,
so it is conflict to other hardware triggers. Driver will disable the hardware
trigger support if touch screen is enabled.
This driver has been tested in AT91SAM9X5-EK and SAMA5D3x-EK.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Trivial cleanup
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Check initialization and chip identifier
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Introduce _set_range_gain()
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Rename _set_rate() to _set_samp_freq()
move locking inside _set() function
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Reorganize _set_meas_conf()
move locking inside _set() function
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Rename _configure() to _set_mode()
and be consistent with other setter functions in that first argument
is hmc5843_data
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Remove ability to change operating mode
only continuous mode is supported for now; the driver could/should
be switched to single conversion mode
operating mode should be determined by the way IIO accesses the device
and not exposed explicitly
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Add trigger handling
v3:
* use __be16 instead of s16
v2 (thanks to Jonathan Cameron):
* drop dynamic buffer allocation, buffer is in hmc5842_data
* grab timestamp near data acquisition
* restrict available scan masks (only read all axis)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Always read all channels values otherwise no updates
v2:
* use __be16 instead of s16
Split out data ready/wait for read measurement
fix bug in case reading status register fails
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index
and drop/inline helper functions _check_int_plus_micros() and
_show_int_plus_micros()
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Wed, 16 Oct 2013 22:19:00 +0000 (23:19 +0100)]
staging:iio:hmc5843: Use SCALE instead of magn_range
v3:
* rename _check_scale() to _get_scale_index()
v2:
* use SCALE instead of CALIBSCALE to control the range/gain
of measurements
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Beomho Seo [Thu, 17 Oct 2013 02:22:00 +0000 (03:22 +0100)]
DT: Add documentation for cm36651 proximity/light sensor
This patch adds device tree binding documentation for CM36651 proximity/light sensor.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Beomho Seo [Thu, 17 Oct 2013 02:22:00 +0000 (03:22 +0100)]
iio: cm36651: Add CM36651 proximity/light sensor
This patch adds a new driver for Capella CM36651 proximity and RGB sensor.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 16 Oct 2013 20:45:00 +0000 (21:45 +0100)]
staging:iio:spear_adc: Fix IRQ check
The test in the spear_adc driver which checks whether the IRQ number returned
by platform_get_irq() has multiple problems. It accepts 0 even though this is
an invalid IRQ. It also rejects IRQ numbers that are larger or equal than
NR_IRQS. First of all drivers should never need to reference NR_IRQS and
secondly with CONFIG_SPARSE_IRQ NR_IRQS is not the upper limit, so the check
might reject valid IRQ numbers. This patch modifies the check to only test
against less or equal to 0.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 16 Oct 2013 20:45:00 +0000 (21:45 +0100)]
staging:iio:lpc32xx_adc: Fix IRQ check
The test in the lpc32xx_adc driver which checks whether the IRQ number returned
by platform_get_irq() has multiple problems. It accepts 0 even though this is an
invalid IRQ. It also rejects IRQ numbers that are larger or equal than NR_IRQS.
First of all drivers should never need to reference NR_IRQS and secondly with
CONFIG_SPARSE_IRQ NR_IRQS is not the upper limit, so the check might reject
valid IRQ numbers. This patch modifies the check to only test against less or
equal to 0.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Nandini Hanumanthagowda [Thu, 17 Oct 2013 18:52:27 +0000 (00:22 +0530)]
staging: vt6656: removed line over 80 chars warning
Removed the checkpatch warning of line over 80 chars
by breaking the long line into sensible chunks of 2 lines
to comply with coding style
Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nandini Hanumanthagowda [Thu, 17 Oct 2013 18:52:26 +0000 (00:22 +0530)]
staging: vt6656: removed C99-style comments
Linux style for comment is C89 style "/* */" and it
doesn't prefer C99-style comment "//...". Hence replaced
C99-style comments used in code by C89 style comment to
comply with linux coding style
Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nandini Hanumanthagowda [Thu, 17 Oct 2013 18:52:25 +0000 (00:22 +0530)]
staging: vt6656: removed unnecessary parentheses in return statement
There was parentheses around return statement's value which
was not required since return statement is not a function.
Hence removed the parentheses to eliminate the checkpatch error
which states:
ERROR: return is not a function, parentheses are not required
Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nandini Hanumanthagowda [Thu, 17 Oct 2013 18:52:24 +0000 (00:22 +0530)]
staging: vt6656: removal of braces under if-control statement
Removed braces under if-else control flow statement whenever
there is only one statement under if-else control statement
to comply with linux coding style
Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nandini Hanumanthagowda [Thu, 17 Oct 2013 18:52:23 +0000 (00:22 +0530)]
staging: vt6656: indentation and removal of unnecessary spaces
Removed unnecessary white spaces at beginning of line
and added proper indentation to fix checkpatch warnings/errors
to improve the readability of code
Signed-off-by: Nandini Hanumanthagowda <nandu.hgowda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Archana kumari [Thu, 17 Oct 2013 19:31:55 +0000 (01:01 +0530)]
staging: vt6655:removed incorrect casting in hostap.c
This patch fixes the following type of sparse warnings:
drivers/staging/vt6655/hostap.c:733:42: warning: cast from restricted gfp_t
drivers/staging/vt6655/hostap.c:733:42: warning: incorrect type in argument 2 (different base types)
drivers/staging/vt6655/hostap.c:733:42: expected restricted gfp_t [usertype] flags
drivers/staging/vt6655/hostap.c:733:42: got int [signed] <noident>
Signed-off-by: Archana kumari <archanakumari959@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashvini Varatharaj [Thu, 17 Oct 2013 16:06:43 +0000 (21:36 +0530)]
Staging: sb105x: Removing trailing whitespaces
Fix checkpatch error : ERROR: trailing whitespace
Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashvini Varatharaj [Thu, 17 Oct 2013 14:22:47 +0000 (19:52 +0530)]
Staging: wlan-ng: changing "* dev" to "*dev"
Fix checkpatch error: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Ashvini Varatharaj <ashvinivaratharaj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Archana kumari [Thu, 17 Oct 2013 13:15:16 +0000 (18:45 +0530)]
staging: dgnc: braces {} are not necessary for single statement in dgnc_cls.c
Fix checkpatch.pl issues with braces {} are not necessary
for single statement blocks in dgnc_cls.c
Signed-off-by: Archana kumari <archanakumari959@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Archana kumari [Thu, 17 Oct 2013 10:24:44 +0000 (15:54 +0530)]
staging: vt6655: Fix Sparse Warning for Static Declarations
This patch fixes the Sparse Warning "symbol was not declared. Should it be
static?" in aes_ccmp.c
Signed-off-by: Archana kumari <archanakumari959@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Thu, 17 Oct 2013 14:30:09 +0000 (20:00 +0530)]
Staging: lustre: Removal of Space between function name and parenthesis in timer.c
The patch fixes the following checkpatch.pl warning in timer.c-
WARNING: space prohibited between function name and open parenthesis '(
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Thu, 17 Oct 2013 14:28:45 +0000 (19:58 +0530)]
Staging: lustre: Removal of assignment in if condition in conrpc.c
This patch fixes the following checkpatch.pl error in conrpc.c-
ERROR: do not use assignment in if condition
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Thu, 17 Oct 2013 14:28:12 +0000 (19:58 +0530)]
Staging: lustre: Fix quoted string split across lines in conrpc.c
This patch fixes the following checkpatch.pl warning in conrpc.c-
WARNING: quoted string split across lines conrpc.c
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Thu, 17 Oct 2013 14:27:26 +0000 (19:57 +0530)]
Staging: lustre: Fix Space Prohibition before '++' in conrpc.c
This patch fixes the following checkpatch.pl error in conrpc.c-
ERROR: space prohibited before that '++'
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Thu, 17 Oct 2013 14:26:52 +0000 (19:56 +0530)]
Staging: lustre: Fix Space Requirement around ':' in conrpc.c
The patch fixes the following checkpatch.pl error in conrpc.c-
ERROR: spaces required around that ':'
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Thu, 17 Oct 2013 14:25:58 +0000 (19:55 +0530)]
Staging: lustre: Removal of Space between function name and parenthesis in conrpc.c
The patch fixes the following checkpatch.pl warning in conrpc.c-
WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Teodora Baluta [Wed, 16 Oct 2013 20:53:33 +0000 (23:53 +0300)]
Staging: rtl8192u: use gfp_t instead of int
This patch fixes the following type of sparse warnings:
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c:247:17: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c:247:17: expected restricted gfp_t [usertype] flags
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c:247:17: got int [signed] gfp_mask
Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Teodora Baluta [Wed, 16 Oct 2013 20:53:32 +0000 (23:53 +0300)]
Staging: rtl8192u: fix functions that should not be declared extern
These functions are already marked extern in the header file
drivers/staging/rtl8192u/r819xU_phy.c:1716:13: warning: function 'InitialGainOperateWorkItemCallBack' with external linkage has definition
drivers/staging/rtl8192u/r819xU_cmdpkt.c:497:12: warning: function 'cmpk_message_handle_rx' with external linkage has definition
Signed-off-by: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Wed, 16 Oct 2013 19:40:36 +0000 (01:10 +0530)]
Staging: vt6655: Removal of Unused Function
This patch removes unused function 'RFbShutDown' from file rf.c
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rashika Kheria [Wed, 16 Oct 2013 19:37:30 +0000 (01:07 +0530)]
Staging: vt6655: Fix Sparse Warning for Static Declarations
This patch fixes the following Sparse Warnings in rf.c:
drivers/staging/vt6655/rf.c:58:21: warning: symbol 'dwAL2230InitTable' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:76:21: warning: symbol 'dwAL2230ChannelTable0' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:93:21: warning: symbol 'dwAL2230ChannelTable1' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:110:15: warning: symbol 'dwAL2230PowerTable' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:180:21: warning: symbol 'dwAL7230InitTable' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:203:21: warning: symbol 'dwAL7230InitTableAMode' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:222:21: warning: symbol 'dwAL7230ChannelTable0' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:288:21: warning: symbol 'dwAL7230ChannelTable1' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:352:21: warning: symbol 'dwAL7230ChannelTable2' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:431:6: warning: symbol 's_bAL7230Init' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:474:6: warning: symbol 's_bAL7230SelectChannel' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:634:6: warning: symbol 'RFbAL2230Init' was not declared. Should it be static?
drivers/staging/vt6655/rf.c:681:6: warning: symbol 'RFbAL2230SelectChannel' was not declared. Should it be static?
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:38 +0000 (14:40 +0100)]
staging: comedi: usbduxsigma: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Use unsigned types consistently for handling comedi sample data and also
for the USB data buffers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:37 +0000 (14:40 +0100)]
staging: comedi: usbdux: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Use unsigned types consistently for handling comedi sample data and also
for the USB data buffers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:36 +0000 (14:40 +0100)]
staging: comedi: s626: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Use unsigned types consistently in the "s626" module when dealing with
sample values.
Rewrite `s626_reg_to_uint()` as it can be done with a one-liner.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:35 +0000 (14:40 +0100)]
staging: comedi: rtd520: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Use unsigned types for sample value manipulations in the "rtd520" driver
for consistency.
Also replace the hand-coded munging of 2's complement sample values with
calls to `comedi_offset_munge()` and AND with `s->maxdata` to strip off
any extra sign bits.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:34 +0000 (14:40 +0100)]
staging: comedi: quatech_daqp_cs: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change `daqp_interrupt()` to use unsigned sample values for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:33 +0000 (14:40 +0100)]
staging: comedi: pcmuio: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change `pcmuio_handle_intr_subdev()` in the "pcmuio" module to use
unsigned sample values for consistency.
Also, make the order in which `pcmuio_handle_intr_subdev()` writes the
two sample values (each actually containing up to 16 1-bit sample
values) independent of the host byte ordering.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:32 +0000 (14:40 +0100)]
staging: comedi: pcmmio: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change `interrupt_pcmmio()` and `ai_rinsn()` in the "pcmmio" module to
use unsigned sample values for consistency.
Also, make the order in which `interrupt_pcmmio()` writes the two sample
values (each actually containing up to 16 1-bit sample values)
independent of the host byte ordering.
Note that this module is a mess, so please excuse the checkpatch
warnings.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:31 +0000 (14:40 +0100)]
staging: comedi: pcl818: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the interrupt data transfer functions in the "pcl818" module to
use unsigned types for consistency.
Also remove the `short *ai_data` member of `struct pcl818_private` as it
is only assigned to and otherwise unused.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:30 +0000 (14:40 +0100)]
staging: comedi: pcl816: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the "pcl816" module to use unsigned types to handle samples for
consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:29 +0000 (14:40 +0100)]
staging: comedi: pcl812: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change `transfer_from_dma_buf()` and `interrupt_pcl812_ai_dma()` in the
"pcl812" module to use `unsigned short` sample values for consistency.
Also remove the `short *ai_data` member of `struct pcl812_private` as it
is only assigned to.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:28 +0000 (14:40 +0100)]
staging: comedi: pcl711: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Don't cast the sample value parameter of `comedi_buf_put()` to `short`,
particularly as it has now been changed to `unsigned short`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:27 +0000 (14:40 +0100)]
staging: comedi: ni_pcidio: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change `nidio_interrupt()` to use unsigned types for sample values
(actually bit-vectors of 1-bit sample values) instead of signed types.
Also rename the `AuxData` variable to `auxdata` and change it from
`long` to `unsigned int` as it only needs to hold a 32-bit value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:26 +0000 (14:40 +0100)]
staging: comedi: ni_mio_common: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_fifo_buffer[]` element of `struct
ni_board_struct` and the types of various local variables from `short`
to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:25 +0000 (14:40 +0100)]
staging: comedi: ni_labpc: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `labpc_ai_cmd()` from `short`
to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:24 +0000 (14:40 +0100)]
staging: comedi: ni_at_a2150: sample types are unsigned
Sample values in comedi are generally represented by unsigned values.
Change the type of the `dma_buffer` member of `struct a2150_private`
from `s16 *` to `uint16_t *`, and change the type of the `dpnt` variable
in `a2150_interrupt()` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:23 +0000 (14:40 +0100)]
staging: comedi: me4000: sample types are unsigned (and not long!)
Sample values in comedi are generally represented as unsigned values.
Change the types of various variables in the "me4000" driver dealing
with samples to use unsigned types for consistency.
Also replace the `long` or `unsigned long` variables used to handle
32-bit register values to `unsigned int`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:22 +0000 (14:40 +0100)]
staging: comedi: icp_multi: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
icp_multi_private` from `short` to `unsigned short` for consistency.
Also remove the `ai_data` and `di_data` members as they are not used.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:21 +0000 (14:40 +0100)]
staging: comedi: fl512: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_readback[]` member of `struct
fl512_private` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:20 +0000 (14:40 +0100)]
staging: comedi: dt3000: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `dt3k_ai_empty_fifo()` from
`short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:19 +0000 (14:40 +0100)]
staging: comedi: dt282x: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change various members of `struct dt282x_private` and various parameters
and variables dealing with samples to use `unsigned short` instead of
`short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:18 +0000 (14:40 +0100)]
staging: comedi: das1800: sample types are unsigned
Sample values in comedi are generally represented by unsigned values.
Change the type of the `ao_update_bits` member of `struct
das1800_private` and the types of various local variables used to hold
sample values from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:17 +0000 (14:40 +0100)]
staging: comedi: das16m1: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_buffer[]` member of `struct
das16m1_private_struct` and the types used by `munge_sample()` and
`munge_sample_array()` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:16 +0000 (14:40 +0100)]
staging: comedi: das16: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the type of the `data` variable in `das16_ai_munge()` from `short
*` to `unsigned short *` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:15 +0000 (14:40 +0100)]
staging: comedi: cb_pcidas64: sample types are unsigned
Sample values in comedi are unsigned. Change the element type of
`ao_bounce_buffer[]` in `struct pcidas64_private` from `short` to
`unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:14 +0000 (14:40 +0100)]
staging: comedi: cb_pcidas: sample types are unsigned
Sample values in comedi are generally represented by unsigned values.
Change the element types of `ai_buffer[]`, `ao_buffer[]` and
`ao_value[]` in `struct cb_pcidas_private` to `unsigned short` for
consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:13 +0000 (14:40 +0100)]
staging: comedi: amplc_pci230: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Replace all uses of `short` to handle sample values in the
"amplc_pci230" driver with `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:12 +0000 (14:40 +0100)]
staging: comedi: amplc_pci224: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the type of the `ao_scan_vals` member of `struct pci224_private`
from `short *` to `unsigned short *` for consistency. Also change the
type of the `array` variable in `pci224_ao_munge()` from `short *` to
`unsigned short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:11 +0000 (14:40 +0100)]
staging: comedi: adv_pci1723: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
pci1723_private` from `short` to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:10 +0000 (14:40 +0100)]
staging: comedi: adv_pci1710: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ao_data[]` member of `struct
pci1710_private` from `short` to `unsigned short` for consistency. Also
remove the `ai_data` member as it is only assigned to. Change various
local variables used to hold sample values to `unsigned short`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:09 +0000 (14:40 +0100)]
staging: comedi: adl_pci9118: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the `ao_data[]` and `dmabuf_virt[]` members of `struct
pci9118_private` and various local variables dealing with sample values
to use `unsigned short` instead of `short` for consistency.
Also remove the `short *ai_data` member of `struct pci9118_private` as
it is only assigned to.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:08 +0000 (14:40 +0100)]
staging: comedi: adl_pci9111: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of the `ai_bounce_buffer[]` member of `struct
pci9111_private_data` from `short` to `unsigned short` for consistency.
Also change the type of the `array` variable in `pci9111_ai_munge()`
from `short *` to `unsigned short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:07 +0000 (14:40 +0100)]
staging: comedi: addi_apci_3120: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
Change the element type of `ul_DmaBufferVirtual[2]` in `struct
addi_private` from `short *` to `unsigned short *` for consistency.
Note that several ADDI-DATA drivers use this struct from
"addi_common.h", but only the "addi_apci_3120" driver uses this member.
Also change the type of the `dma_buffer` parameter of
`v_APCI3120_InterruptDmaMoveBlock16bit()` from `short *` to `unsigned
short *`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:06 +0000 (14:40 +0100)]
staging: comedi: 8255: sample types are unsigned
Sample values in comedi are generally represented as unsigned values.
`subdev_8255_interrupt()` calls `comedi_buf_put()` with a `short` data
value merely because that's what was previously expected. Since it now
expects an `unsigned short`, change it here for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:05 +0000 (14:40 +0100)]
staging: comedi: use unsigned sample in cfc_write_to_buffer()
Sample values in comedi are generally represented as unsigned values.
`cfc_write_to_buffer()` in "comedi_fc.h" currently uses `short` to hold
a 16-bit sample value to be written to the buffer. Change the type of
the parameter to `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 16 Oct 2013 13:40:04 +0000 (14:40 +0100)]
staging: comedi: use unsigned samples for comedi_buf_put()/get()
Sample values in comedi are generally represented as unsigned values.
`comedi_buf_put()` and `comedi_buf_get()` use a `short` to hold the
16-bit data value being transferred to or from the comedi buffer.
Change them to use `unsigned short` for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 15 Oct 2013 20:41:38 +0000 (21:41 +0100)]
staging: vt6656: rxtx.c s_vFillTxKey replace u8 *pbyBuf.
Replace with struct vnt_tx_fifo_head and attach pbyBuf to
adwTxKey[0]
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 15 Oct 2013 20:05:02 +0000 (21:05 +0100)]
staging: vt6656: rxtx.c clean up s_uGetRTSCTSDuration
White space clean up.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 15 Oct 2013 20:03:53 +0000 (21:03 +0100)]
staging: vt6656: rxtx.c s_uGetRTSCTSDuration allow fall-through duplicates
Allow switch fall-through of duplicate case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 15 Oct 2013 20:00:09 +0000 (21:00 +0100)]
staging: vt6656: rxtx.c s_bPacketToWirelessUsb set fallback tx rates
Set the two TX fall back rates in s_bPacketToWirelessUsb and
pass to private area of driver in variables tx_rate_fb0
and tx_rate_fb1 from the wFB_Opt0/wFB_Opt1 array.
Apply these rates were needed in the TX structure and
remove byFBOption settings in s_uGetRTSCTSDuration.
This greatly simplifies s_uGetRTSCTSDuration and
more future flexibility of setting rates from
upper levels of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio: Remove unused iio_sw_buffer_preenable()
The functionality implemented by iio_sw_buffer_preenable() is now done directly
in the IIO core and previous users of iio_sw_buffer_preenable() have all been
updated to not use it anymore. It is unused now and can be remove.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
staging:iio:ade7758: Remove redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
staging:iio:ad5933: Remove redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
staging:iio:simple-dummy: Remove redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
staging:iio:mxs-lradc: Remove redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
staging:iio:lis3l02dq: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:gp2ap020a00f: Remove redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:st_pressure: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:st_magn: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:triggered-buffer: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:st_gyro: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:ti_am335x: Remove redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer
core, so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:ad_sigma_delta: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:ad7887: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:ad7266: Remove redundant call to iio_sw_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio:st_accel: Drop redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 14 Oct 2013 16:49:00 +0000 (17:49 +0100)]
iio: Update buffer's bytes per datum after updating the scan mask
Currently a IIO device driver needs to make sure to update the buffer's bytes
per datum after the scan mask has changed. This is usually done in the preenable
callback by invoking iio_sw_buffer_preenable(). This is something that needs to
be done and is done for virtually all devices which support buffers (we
currently have only one exception). Also this a bit of a layering violation
since we have to call the buffer setup ops from the device setup ops. This
requires the device driver to know about the internal requirements of the buffer
(e.g. whether we need to call the set_bytes_per_datum) callback. And especially
with in-kernel buffer consumers, which allows to attach arbitrary buffers to a
device, this is something that the driver can't know.
Moving this to the core allows us to drop the individual calls to
iio_sw_buffer_preenable() from drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>