INSUN PYO [Mon, 24 Feb 2020 05:06:30 +0000 (14:06 +0900)]
Removed "route add" in rndis usb mode
Ifconfig command will also automatically add route information to the routing table in the kernel.
So if you run "route add" additionally, you have duplicate routing table entries.
sh-3.2# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
cns1.sec.samsun 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
cns2.sec.samsun 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0
192.168.0.1 * 255.255.255.255 UH 0 0 0 wlan0
192.168.129.0 * 255.255.255.0 U 0 0 0 usb0 <== here
192.168.129.0 * 255.255.255.0 U 0 0 0 usb0 <== here
Change-Id: I96c290ce5de1da81ff7b9f99cfaefc8a64b618ac
sanghyeok.oh [Tue, 11 Feb 2020 12:10:34 +0000 (21:10 +0900)]
add static keyword to locally used functions
Change-Id: Ia9869628db2e6fe89f3a95d89894f4c31eeb9592
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
Youngjae Cho [Fri, 21 Feb 2020 05:49:59 +0000 (14:49 +0900)]
Add LCD_OFF_COMPLETE notifier
DEVICE_NOTIFIER_LCD_OFF_COMPLETE is used for disabling lbm on LCDOFF.
Change-Id: I88064ef316dd69623be197e5824c168c0069bf74
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 20 Feb 2020 08:40:45 +0000 (17:40 +0900)]
Add strings for LCDON triggered from bezel/backkey
Change-Id: I2dc3a91991ee318b5419822f8f161d648820715d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Fri, 21 Feb 2020 03:47:17 +0000 (12:47 +0900)]
sync usb mode index with vconf
Change-Id: Ifa79010dd982e48df995a02a6c6dc519c0e40733
Youngjae Cho [Thu, 20 Feb 2020 05:54:28 +0000 (14:54 +0900)]
Add FreqStrength to locate optimal position for D2D charging
For D2D charge, user doesn't know the optimal location for charging.
To improve this, support information about frequency strength to user
so that they can adjust device charging position.
Change-Id: Id002cc62b1aaf37d31328fcc47e0ef3368a0a20f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 20 Feb 2020 04:17:39 +0000 (13:17 +0900)]
Update pm_cur_state correctly in lcd_on_direct()
Change-Id: Ic72bbd46a90a597e814de87b45f9c2962d3d7e0d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 19 Feb 2020 08:23:02 +0000 (17:23 +0900)]
Fix dbus method: change_usb_client_mode()
Change-Id: I285ecde35f611642bbec068ddade0482107603a5
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Wed, 19 Feb 2020 00:00:21 +0000 (09:00 +0900)]
Remove to check if mtp-responder.service exists.
If you disable mtp mode if there is not mtp service.
The predefined usb mode and current usb state do not match.
So, mtp-responder-dummy.service is created int libdevice-node.
This prevents inconsistencies between predefined usb mode and the current state.
Change-Id: I05dec48b4aabe8bbf0f9139502a2092e518d1aa3
INSUN PYO [Wed, 19 Feb 2020 07:28:34 +0000 (07:28 +0000)]
Merge "Fix usb mode<->vconf conversion" into tizen
Youngjae Cho [Thu, 13 Feb 2020 07:40:09 +0000 (16:40 +0900)]
Fix usb mode<->vconf conversion
We consider usb mode is always valid wherease usb vconf may not
represent the mode correctly as it is determined manually. (eg.
As mode mapping table or vconf definition is hard-coded manually,
it can cause mismatch as usb policy changes.) So mode update always
take place, but vconf update doesn't if converted vconf is invalid.
You can see this in usb_state_set_selected_mode(). usb_selected_mode
is always updated regardless of converted vconf is valid or not. The
vconf update, on the other hand, doesn't take place if the converted
vconf is invalid.
Change-Id: I4f7b0d7529b3612947baf2b9869f4b77571d264f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Tue, 18 Feb 2020 06:07:35 +0000 (15:07 +0900)]
Enable rndis usb mode for tv and iot profile
Iot profile use rndis usb mode without usb tethering feature.
So, all profile have to support usb rndis mode.
Change-Id: Ib75aaf0c141fcb8b554cdcd2adea9a8ad37e3b02
Hyotaek Shim [Tue, 18 Feb 2020 05:36:27 +0000 (14:36 +0900)]
Add iot-display.conf
Change-Id: I40b5b40f7cabb5165baaaacf6776139f1faf22cc
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Mon, 17 Feb 2020 08:14:58 +0000 (17:14 +0900)]
Introduce critical-log API from dlog
Below are added as critical-log
- Power(Display) lock/unlock
- PowerOff/Reboot
- Battery status/health
Change-Id: I6f2f5b1ee660d4f6a8a426b71d311719f9304a36
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 17 Feb 2020 09:47:41 +0000 (18:47 +0900)]
Delete critical-log module
Replace critical-log module to dlog API
Change-Id: Ie2e7c6ddebe47a1d5c89cf494f7ce0fe6102f89f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 14 Feb 2020 02:43:05 +0000 (11:43 +0900)]
Add dbus interface for setting DIM_FLAG
Path : /Org/Tizen/System/DeviceD/Display
Interface : org.tizen.system.deviced.display
Method : DimStayControl
Signature : "(i)"
Parameter : 0(Unset flag), 1(Set flag)
Control DimStay. Update DIM_FLAG and change brightness accordingly.
Change-Id: I7b3197a965044fdf9e0313ebf8b4d1f383ea7017
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 13 Feb 2020 08:36:57 +0000 (17:36 +0900)]
Fix coverity issue
CID 1123903 (#1 of 1): Incorrect deallocator used (ALLOC_FREE_MISMATCH)
Change-Id: I88366204c9bb349e42dd3a79688a1c13280fe622
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Wed, 12 Feb 2020 10:59:58 +0000 (19:59 +0900)]
Add static configurations for usb gadget mode according to sdb debugging on/off
On:
SET_USB_SDB (USB_FUNCTION_MTP | USB_FUNCTION_ACM | USB_FUNCTION_SDB)
Off:
SET_USB_DEFAULT (USB_FUNCTION_MTP | USB_FUNCTION_ACM)
Change-Id: I88248ee3508a9529f875bb85a12b020907e40798
INSUN PYO [Wed, 12 Feb 2020 08:00:20 +0000 (17:00 +0900)]
Add static configurations for usb gadget mode according to tethering on/off
On:
SET_USB_RNDIS_SDB (USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_RNDIS)
Off:
SET_USB_SDB (USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_MTP)
Change-Id: I18cad16c6cebfa6d168beb2acca6462e673d2701
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
INSUN PYO [Wed, 12 Feb 2020 07:24:29 +0000 (07:24 +0000)]
Merge "Improved log readability" into tizen
INSUN PYO [Tue, 11 Feb 2020 06:15:23 +0000 (15:15 +0900)]
Change usb_cur_mode from bitOR to index.
In MCD 4.0, VCONFKEY_USB_SEL_MODE has been changed to usb function index instead of bitOR of USB_FUNCTION_OOO.
Deviced works internally as bitOR of USB_FUNCTION_OOO, so you must convert it when you read/write from vconf.
Since these two values are not 1:1 mapping, so you have to be careful when you convert bitOR to usb function index.
Mapping table
//////////////////////////////////////////////////////////////////////////////////////////////
[SET_USB_NONE] = USB_FUNCTION_NONE
[SET_USB_DEFAULT] = USB_FUNCTION_MTP | USB_FUNCTION_ACM
[SET_USB_SDB] = USB_FUNCTION_MTP | USB_FUNCTION_ACM | USB_FUNCTION_SDB
[SET_USB_SDB_DIAG] = USB_FUNCTION_MTP | USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_DIAG
[SET_USB_RNDIS_TETHERING] = USB_FUNCTION_RNDIS | USB_FUNCTION_SDB | USB_FUNCTION_ACM
[SET_USB_RNDIS] = USB_FUNCTION_RNDIS
[SET_USB_RNDIS_SDB] = USB_FUNCTION_RNDIS | USB_FUNCTION_SDB | USB_FUNCTION_ACM
[SET_USB_DIAG_SDB] = USB_FUNCTION_MTP | USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_DIAG
[SET_USB_RNDIS_DIAG] = USB_FUNCTION_RNDIS | USB_FUNCTION_DIAG
[SET_USB_DIAG_RMNET] = USB_FUNCTION_DIAG | USB_FUNCTION_RMNET
[SET_USB_ACM_SDB_DM] = USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_DM
[SET_USB_RNDIS_SDB_ACM] = USB_FUNCTION_RNDIS | USB_FUNCTION_ACM | USB_FUNCTION_SDB
Reverse mapping table
//////////////////////////////////////////////////////////////////////////////////////////////
USB_FUNCTION_NONE = SET_USB_NONE
USB_FUNCTION_RNDIS = SET_USB_RNDIS
USB_FUNCTION_MTP | USB_FUNCTION_ACM = SET_USB_DEFAULT
USB_FUNCTION_DIAG | USB_FUNCTION_RNDIS = SET_USB_RNDIS_DIAG
USB_FUNCTION_DIAG | USB_FUNCTION_RMNET = SET_USB_DIAG_RMNET
USB_FUNCTION_MTP | USB_FUNCTION_ACM | USB_FUNCTION_SDB = SET_USB_SDB
USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_RNDIS = SET_USB_RNDIS_SDB
USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_DM = SET_USB_ACM_SDB_DM
USB_FUNCTION_MTP | USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_DIAG = SET_USB_SDB_DIAG
Mapping excluded from reverse table
//////////////////////////////////////////////////////////////////////////////////////////////
USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_RNDIS = SET_USB_RNDIS_TETHERING
USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_RNDIS = SET_USB_RNDIS_SDB_ACM
USB_FUNCTION_MTP | USB_FUNCTION_ACM | USB_FUNCTION_SDB | USB_FUNCTION_DIAG = SET_USB_DIAG_SDB
Change-Id: I3bd0227e274a45135218ae1b015926e13dd9469a
INSUN PYO [Wed, 12 Feb 2020 02:20:09 +0000 (11:20 +0900)]
Improved log readability
Change-Id: I5b48879b74fd9a73e8ff889781146cd73ceddc5e
Youngjae Cho [Tue, 11 Feb 2020 08:53:57 +0000 (17:53 +0900)]
Fix coverity issue
CID 1099199 (#1 of 1): Read from pointer after free (USE_AFTER_FREE)
20. deref_after_free: Dereferencing freed pointer elem.
Change-Id: I85c34f351db0cc10ce384176b90ba72067e3c051
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 11 Feb 2020 07:56:20 +0000 (16:56 +0900)]
Fix lockcheck interval
Change-Id: Ifac60f83149cb94f8ac1392950fe57b454203cad
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Tue, 11 Feb 2020 00:51:00 +0000 (09:51 +0900)]
Refactoring usb current mode
Change-Id: Ieaec11ed3cf352c60adf30724552a7fbdfb5a015
Yunmi Ha [Mon, 10 Feb 2020 08:15:01 +0000 (17:15 +0900)]
Fix svace issue
- Remove memory-leak
- Remove unreachable code
Change-Id: Ie4f9a2819e0e839e21fa7a35aa672ed12f08f158
Signed-off-by: Yunmi Ha <yunmi.ha@samsung.com>
Youngjae Cho [Tue, 11 Feb 2020 00:27:40 +0000 (09:27 +0900)]
Don't check if timeout is 0 in dbus_sethbm_timeout()
When turning off hbm, it is natural that both the value and the timeout
should be zero as parameters. For turning on the hbm, timeout 0 will be
checked again in hbm_set_state_with_timeout().
Change-Id: I97819bacdff3c156cf5c458ca5f4f230f83f1eb2
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Fri, 7 Feb 2020 10:16:28 +0000 (19:16 +0900)]
Apply changeable RNDIS IP address
Change-Id: Icddea9c594cf9aee5afa9d203a5681276ca8f016
INSUN PYO [Tue, 4 Feb 2020 00:52:24 +0000 (09:52 +0900)]
Add log related to engineer mode for usb state
Change-Id: Iad11d4ec9021c6854a912b3596a193545ac4b5d0
Youngjae Cho [Mon, 3 Feb 2020 07:34:06 +0000 (16:34 +0900)]
Change powerlock/unlock signal name for consistency
Change-Id: I7c4c81431511d7aa696220c55b49546d69574f7a
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Mon, 3 Feb 2020 05:53:26 +0000 (14:53 +0900)]
Change version
Change-Id: I1d0ae4cdcc6290f81c289e53ce36596d2d64f9db
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Fri, 31 Jan 2020 01:32:50 +0000 (10:32 +0900)]
Change version
Change-Id: Ib3bdef354fd5bec99665783e663c4c2ca078ffff
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 31 Jan 2020 07:24:20 +0000 (16:24 +0900)]
Generate signal about power lock/unlock information
Change-Id: I75b2a36ff57243bf13a8d6bcd8047d40a015939f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 31 Jan 2020 06:23:33 +0000 (15:23 +0900)]
Provide time info for suspend/wakeup signal
Change-Id: Ia79922caa6a1cde39022c4d092b781217eace58b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 31 Jan 2020 01:18:15 +0000 (10:18 +0900)]
Add pmqos ultrapowersaving
Change-Id: I56d47fbc1741c04e01f0b630f8125d6b2f645f0d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 28 Jan 2020 11:15:51 +0000 (20:15 +0900)]
Modify powersaving within the touchscreen_start()
Change-Id: I979e67d4d0caeb2095ee1e2014c368c4a009d291
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Wed, 29 Jan 2020 08:14:51 +0000 (17:14 +0900)]
Remove unused function usb_state_get_mode_str()
To break bad dependencies with libdeviced, remove unused functions.
Change-Id: I72d9712e955f96e3de3acdbb623a40a64a675f15
Hyotaek Shim [Wed, 29 Jan 2020 05:28:30 +0000 (14:28 +0900)]
Fix dbus policy
01-21 17:04:28.264 E/W-SETTING(P14042, T14042): StDeviceModel.cpp: _sendDbusMessage(748) >
[0;31m* Critical * dbus_connection_send error(org.freedesktop.DBus.Error.AccessDenied:Rejected
send message, 2 matched rules; type="method_call", sender=":1.3163"
(uid=5001 pid=14042 comm="/usr/apps/com.samsung.clocksetting/bin/setting-dev")
interface="org.tizen.system.deviced.touch" member="SetSensitivity" error name="(unset)"
requested_reply="0" destination="org.tizen.system.deviced" privilege="(n/a)"
(uid=0 pid=2682 comm="/usr/bin/deviced ")
rule(<deny send_destination="org.tizen.system.deviced" send_type="method_call" />))
Change-Id: I209fec572db02cf6ce83b5e40966739b78e6846b
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
INSUN PYO [Tue, 28 Jan 2020 11:20:34 +0000 (20:20 +0900)]
Fix build warning
Change-Id: If9c91e88101653de559727d8685f6625a7329d5c
Youngjae Cho [Tue, 28 Jan 2020 08:49:17 +0000 (17:49 +0900)]
Add an additional condition for touchscreen_stop()
Check for the display_conf in case touchscreen_stop() is called
before touchscreen_init().
Change-Id: Ieaf676e1f07487de082a9ddf27941fd61c6e2b1d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Tue, 28 Jan 2020 07:06:41 +0000 (16:06 +0900)]
Fix touchscreen_stop
Touchscreen powersaving/enable/disable is required also for AOD mode.
Change-Id: I3602de43d76dd8c36af144e2a1633d526aca4f71
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Wed, 22 Jan 2020 04:32:53 +0000 (13:32 +0900)]
Fix Poweroff, reboot enum for PowerOff.ChangeState
0: None
1: Power Off Popup is launched (not supported since Tizen5.5)
2: Poweroff
3: Restart
4: Exit
Change-Id: I704ca9da1e8c4b50a9eff0e148e3945d1f0d1919
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Tue, 21 Jan 2020 05:56:48 +0000 (14:56 +0900)]
Do not unref timeout_source right after the attach
Unref right after the attach make gsource be automatically freed on
returning G_SOURCE_REMOVE by callback. This make potential segfault.
To avoid this, move the unref after the callbacks.
Change-Id: I4022565b5f9d667867d2a99dbe8b915ae76648f5
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
sanghyeok.oh [Fri, 6 Dec 2019 12:59:08 +0000 (21:59 +0900)]
auto-test: add dbus interface for deviced
Change-Id: I7b4b693c081e41729fa541dad9652ca30f57dc49
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
Youngjae Cho [Fri, 17 Jan 2020 02:55:01 +0000 (11:55 +0900)]
Fix display savelog output format
Change-Id: Ie2e578782f7e98484b2cc095f3b4d59000df5158
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jan 2020 09:23:49 +0000 (18:23 +0900)]
Delete duplicate request check
Delete duplicate request condition. This can be problem when request
timeout happen. When the timeout happen it cannot update state, causing
mismatch between real state and variable state.
Change-Id: I3c1557e0abc198645e44f5e44b99cc63ee386bd7
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jan 2020 11:16:38 +0000 (20:16 +0900)]
Fix segfault when referencing undefined function
Change-Id: I1c076acaa49255ae2f884f4471480785b35e867b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jan 2020 05:20:34 +0000 (14:20 +0900)]
Support touch wakeup, touchscreen powersaving
Change-Id: I39e4b002a4acf24dabf5c1f78ef4c30e46aede9d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Thu, 16 Jan 2020 06:35:21 +0000 (15:35 +0900)]
Fix to determine network interface name at runtime in rndis mode
TM1, TW2, XU3 : use "usb0" name
TW3 : use "rndis0" name
/////////////////////////////////////////////////////////////////////////////////////////////////////////////
TM1, TW2
- It is not configfs, so it has no /sys/kernel/config/usb_gadget/hal-gadget/functions/rndis.default/ifname.
- Use "usb0" interface name fixed by kernel.
TW3 (tizen 5.5)
- It is not configfs.
- Kernel does not support rndis.
TW3 (tizen 6.0)
- It is configfs.
- "/sys/kernel/config/usb_gadget/hal-gadget/functions/rndis.default/ifname" has "rndis0" intarface name.
XU3
- It is configfs.
- "/sys/kernel/config/usb_gadget/hal-gadget/functions/rndis.default/ifname" has "usb0" intarface name.
Change-Id: Ibf902121e11007e84321e5fee421273fc03a1a58
Youngjae Cho [Thu, 16 Jan 2020 04:16:06 +0000 (13:16 +0900)]
Fix function return type
Change-Id: I5a64d4d2bd3c9a55ecc4449812308979f59bae1e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 15 Jan 2020 01:12:44 +0000 (10:12 +0900)]
Fix type of extcon_notifier member variable
Change-Id: Id1325fd93d277ef3485963bbc48889c5fa1037b4
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Tue, 14 Jan 2020 12:14:03 +0000 (21:14 +0900)]
Ignore AddPowerOffWait in the middle of poweroff sequence
Change-Id: I22f92c7c2b57f8adca8c245f23b38a2cca428810
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Tue, 14 Jan 2020 11:46:26 +0000 (20:46 +0900)]
Start poweroff_start_animation() right after PowerOff event broadcasting
Change-Id: I890e75dc8973d77f260dc16a61e4cdec7c170fab
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Tue, 14 Jan 2020 11:41:11 +0000 (20:41 +0900)]
Add spare time for AddPowerOffWait requests
Some services are executed under PowerOff event, and trigger AddPowerOffWait.
Change-Id: I3fac3e48bff151e6c4ccd7db6f6292a23068790a
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Thu, 26 Dec 2019 04:00:28 +0000 (13:00 +0900)]
Make dpms_set_state() synchronous
Make dpms_set_state() synchronous. This change allowes the two
get/set client to use the same dpms_context, which enables
merging those two client into one.
Change-Id: I41bb33e0dd25ff3306e2450e921e65887d13f905
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 14 Jan 2020 02:22:59 +0000 (11:22 +0900)]
Add dbus method for touchscreen enable/disable
Change-Id: Ib96ac050d0e4ee934440838b3a4f50302f86fc98
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Mon, 13 Jan 2020 01:04:39 +0000 (10:04 +0900)]
Fix memory leak
Change-Id: Ie04df74cf2c15d0bc23c634ace44ec1b9834c06b
INSUN PYO [Fri, 10 Jan 2020 09:37:12 +0000 (18:37 +0900)]
Fix bug. use "and" operation(&) instead of "or" operation(|)
Change-Id: I09107adac1b695294de3b4196b7173f69bc1c85c
(cherry picked from commit
43bbe64b8453dc6c93da3a756219dd23a6a9a9e3)
INSUN PYO [Fri, 10 Jan 2020 05:00:10 +0000 (14:00 +0900)]
Enable usb_mode udev event for factory mode.
Factory jig internally disconnects only signal cable(in Blue and White) of USB cable.
It makes a strange state.
In general, when the USB cable is disconnected, switch udev event and usb_mode udev event occur.
But, in factory jig case, usb_mode udev event only occurs.
Without luck, data-router.service crashs on factory jig because of one's own problems.
So, we have to restart data-router.service when usb_mode udev event happens.
And, sdbd.service and mtp-response.service also restart as a preventive measure.
Change-Id: Ia538383aefd82bad9eaf976fc4dedef605c60026
Youngjae Cho [Fri, 10 Jan 2020 04:39:52 +0000 (13:39 +0900)]
Fix display to release lock on booting done.
Change-Id: I1743869f2ca7d218ef3745cab71c1f7785edadde
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 9 Jan 2020 08:39:23 +0000 (17:39 +0900)]
Fix GCC-9 build error on x86_64, aarch64
Change-Id: I7ede3309e98ddf58ad11e5feffec4f01abfdc40b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 9 Jan 2020 05:43:40 +0000 (14:43 +0900)]
Support display blink on logdump
Change-Id: I9ee202204711b196c2d10807a8da09845bacc203
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Thu, 9 Jan 2020 06:12:29 +0000 (15:12 +0900)]
Extend USB gadget configuration for further usage #2
Change-Id: I9d0086b2bea235baab8241b0f7e89d3fca47c8e5
Youngjae Cho [Tue, 7 Jan 2020 09:25:40 +0000 (18:25 +0900)]
Rename functions, variables for consistency
dbus_platformlcdcontrol() -> dbus_changestatebyreason()
display_platform_on() -> display_on_by_reason()
display_platform_off() -> display_off_by_reason()
display_platform_control() -> deleted
enum platform_control -> deleted
Change-Id: I66e0024e235983629d7c8853510ab5bae2921906
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 8 Jan 2020 06:05:56 +0000 (15:05 +0900)]
Fix build warning on x86_64, aarch64
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Change-Id: I8a17c36bb5b79e01ce814be2cfa563ca95780836
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
sanghyeok.oh [Tue, 10 Dec 2019 12:29:01 +0000 (21:29 +0900)]
battery-monitor: modified to use consecutive sessions
Monitoring data consists of multiple sessions.
Session means monitoring data within device enabled(on) state.
So display battery monitor should distinguish each lcd on-off as session.
Change-Id: I99d1e91857af802890de9f851ff08c69797bffba
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
Youngjae Cho [Wed, 8 Jan 2020 02:44:10 +0000 (11:44 +0900)]
Fix log type specifier
Change-Id: If0b713d19c48bbde1e855401fcf09e9b4e24e083
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
sanghyeok.oh [Fri, 3 Jan 2020 08:21:52 +0000 (17:21 +0900)]
Remove warning for GCC-9
Change-Id: If89275f76837f5d3ba6ccf16145abe4526d186b9
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
sanghyeok oh [Mon, 6 Jan 2020 09:21:38 +0000 (09:21 +0000)]
Merge "[Tizen 6.0] Support build with glibc 2.30" into tizen
Mikhail Kashkarov [Mon, 16 Dec 2019 04:54:19 +0000 (07:54 +0300)]
[Tizen 6.0] Support build with glibc 2.30
The current glibc definitions of the htole* macros don't allow their use
in a static context:
descs_gen.c:59:12: error: initializer element is not constant
59 | .magic = htole32(FUNCTIONFS_DESCRIPTORS_MAGIC),
| ^~~~~~~
Import solution from https://patchwork.kernel.org/patch/
10517059/
Change-Id: I0019f890de17fbf4d9c89777b0ac07ccb7a74171
Signed-off-by: Mikhail Kashkarov <m.kashkarov@partner.samsung.com>
INSUN PYO [Fri, 3 Jan 2020 00:18:40 +0000 (09:18 +0900)]
Enable usb tethering for wearable profile
Change-Id: I15349031f74ef7773337aa6b500757e5234580ca
(cherry picked from commit
b34ca1a93580481ba270071cf5b233d84e9f9501)
Youngjae Cho [Fri, 27 Dec 2019 09:01:11 +0000 (18:01 +0900)]
Support extcon counter using device-notifier
Change-Id: If4c43890024c147561d31e41ade60066c3f321fa
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
INSUN PYO [Fri, 27 Dec 2019 07:13:57 +0000 (16:13 +0900)]
Extend USB gadget configuration for further usage
Change-Id: I6ea6de9ead0ba0dbef89d71ab0717b2c6b2477c9
(cherry picked from commit
234a312b38c2407ea41020df6d7508501caa91ff)
Hyotaek Shim [Fri, 27 Dec 2019 06:22:54 +0000 (15:22 +0900)]
Add a dbus policy rule for /csa partition
<check send_destination="org.tizen.system.deviced" send_interface="org.tizen.system.deviced.Csa"
privilege="http://tizen.org/privilege/internal/default/platform"/>
Change-Id: I1e31836a350e14e1c5efa100493c5df15c3aa2d4
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Fri, 27 Dec 2019 06:01:06 +0000 (15:01 +0900)]
Watchdog timeout 90 -> 30 sec to reduce delay from unexpected poweroff failure
Change-Id: Ib86c4507fd127e046958ea63083500dcabdce881
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Fri, 27 Dec 2019 05:52:36 +0000 (14:52 +0900)]
Add /shared/.h files in deviced.pc
Change-Id: I93b5166b898f54122e295ebbb93441b600be702f
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Thu, 26 Dec 2019 12:33:09 +0000 (21:33 +0900)]
Add deviced header in deviced.pc for product plugin modules
BuildRequires: pkgconfig(deviced)
Change-Id: I250f5780b646dd9b56d48b607a531249a8dbe62a
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Thu, 19 Dec 2019 07:18:43 +0000 (07:18 +0000)]
Revert "Safe umount an sdcard partition (/opt/media/SDCardA1)"
This reverts commit
bf9160eaaae561158273f08316da80c857960286.
Change-Id: Ia8c827d76ed4710891a27c0c97c938ca33353905
Youngjae Cho [Tue, 17 Dec 2019 00:50:11 +0000 (09:50 +0900)]
Change DPMS_GET_TIMEOUT to 5 seconds
Change-Id: I892308efa4c6c4cecdca9b5f1361d590e48ab660
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 16 Dec 2019 06:09:31 +0000 (15:09 +0900)]
Separate context of DPMS get/set request
Separate DPMS client into two, get/set, each of which is only in charge
of get or set request. And attached to different context so
that they can be handled in different context.
* dpms_set_state() --> handled within the default context
* dpms_get_state() --> handled within the dpms_context
Change-Id: I34c7388f83d8bb54a8bfc12c65c2fc45455b9ce1
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 12 Dec 2019 08:23:51 +0000 (17:23 +0900)]
Refactoring display-dpms
- Separate initialization from dpms_is_available() to init_dpms().
- Integrate dpms exit sequence into exit_dpms() for poweroff.
- Delete pointer 'wl_glib_data' and use pointer 'info' instead,
which are practically same.
- Fix usage of disconnect_interface_with_dpms() considering
GSource finalize.
Change-Id: I7579b7338ee263b4c991cc8a055cefc0eb392f02
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 12 Dec 2019 02:24:56 +0000 (11:24 +0900)]
Fix typo
Fix process_background(), process_foreground() log.
Change-Id: If80620f63c0997b6339aa788656bd416b4fb5d66
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 11 Dec 2019 05:23:42 +0000 (14:23 +0900)]
Delete disabling hardkey sound while touchscreen pressed
Change-Id: Ie0f358de9da8a6a54b65874b320255fe9977a7a9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
sanghyeok.oh [Fri, 20 Sep 2019 12:10:55 +0000 (21:10 +0900)]
battery-monitor: initial module
Change-Id: Ib353d1baf71816e7cdfe89e9b879759d05504f9f
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
sanghyeok.oh [Mon, 9 Dec 2019 09:01:31 +0000 (18:01 +0900)]
remove cmake warning
Change-Id: I2e164564262605f91b1aa0c0454b257c33628be9
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
Youngjae Cho [Mon, 25 Nov 2019 08:43:04 +0000 (17:43 +0900)]
Change unref location of dpms_loop, dpms_context
Change-Id: I7272dfc095424b4a7d3bf7cd4a65f2e714e5c5df
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 26 Nov 2019 09:06:10 +0000 (18:06 +0900)]
Exit mainloop after poweroff call to systemd
Change-Id: I150d0638026632c655f2f7280edb77070f7ce034
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Thu, 21 Nov 2019 05:33:43 +0000 (14:33 +0900)]
Remove default value at systemd services
https://www.freedesktop.org/software/systemd/man/systemd.service.html
- Behavior of notify is similar to exec; ... If NotifyAccess= is missing or set to none, it will be forcibly set to main.
- WatchdogSec= ... If NotifyAccess= is not set, it will be implicitly set to main.
Change-Id: I6392252b39036367dc56c62854219b4df73e0ad2
Youngjae Cho [Thu, 14 Nov 2019 08:49:11 +0000 (17:49 +0900)]
Make get_lcd_power() use dpms to get lcd power
Deviced used to set lcd power by requesting to dpms(dpms_set_state), but
get lcd power by reading node directly through HAL(display_dev->get_state).
To make this get/set machanism same, get mechanism changed to use
dpms(dpms_get_state), removed all regarding HAL. Also, make dpms_get_state
synchronous and dpms_set_state asynchronous to ensure latency issue.
Change-Id: Ib93cb55d18f3e175a16c7138288b09ac76d25f05
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 12 Nov 2019 06:28:14 +0000 (15:28 +0900)]
Add touchscreen execute
Change-Id: Ia97235271addd8c10690e1b0dbfdc92b3b8c0231
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Junkyeong Kim [Wed, 6 Nov 2019 07:31:14 +0000 (16:31 +0900)]
display-dpms: use get_state listener to get get_dpms request event
Change-Id: Iae31d9d3d95fcdd6c886c3be5988d7b19759bc72
Signed-off-by: Junkyeong Kim <jk0430.kim@samsung.com>
sanghyeok.oh [Fri, 8 Nov 2019 02:02:44 +0000 (11:02 +0900)]
svace fix
Change-Id: I520705e248ae242f8aba8c1821380d774cee3046
Signed-off-by: sanghyeok.oh <sanghyeok.oh@samsung.com>
Youngjae Cho [Fri, 8 Nov 2019 06:33:26 +0000 (15:33 +0900)]
Exclude battery critical-log in case of -DBATTERY_MODULE=off
Change-Id: I9adfd7018964fb14b73f1453876ee0fc3d5b78ea
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Mon, 11 Nov 2019 02:13:52 +0000 (11:13 +0900)]
Disable reboot option check
Change-Id: If0ab215661dd131c04558ae055260b2fa72e1246
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Tue, 5 Nov 2019 01:29:05 +0000 (10:29 +0900)]
Remove pweroff_popup, shorten long key press interval
Change-Id: Ic0ce8d155ec698265f582f813de5874dd8925416
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 28 Oct 2019 01:52:03 +0000 (10:52 +0900)]
Delete trailing '\n' character in log of ctime_r
Change-Id: I494de2e480bbc3aff092136f75d114560763f747
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 17 Oct 2019 08:19:47 +0000 (17:19 +0900)]
Stop checking lock if process had been terminated
Change-Id: I960c850c033f6ab2297293ba092c101a1cf77775
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Thu, 17 Oct 2019 11:03:12 +0000 (20:03 +0900)]
Add config file of critical-log to iot and tv profiles.
Because of "config-parser.c: config_parse(127) > Failed to read '/etc/deviced/critical-log.conf'. line=0" error on XU3.
Change-Id: I9fef3ca3a21052544e9c00aa0ef831d46069bb32
Hyotaek Shim [Tue, 8 Oct 2019 10:05:49 +0000 (19:05 +0900)]
Remove unused code regarding /usr/bin/save_blenv
Change-Id: If4418c367927abe2edef46afedb4831797eef154
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Hyotaek Shim [Mon, 7 Oct 2019 05:47:29 +0000 (14:47 +0900)]
Fix ASAN build errors
[ 288s] CMakeFiles/deviced.dir/src/battery/lowbat-handler.c.o:(.bss+0x140): multiple definition of `old_battery'
[ 288s] CMakeFiles/deviced.dir/src/battery/battery-time.c.o:(.bss+0x200): first defined here
[ 288s] CMakeFiles/deviced.dir/src/battery/lowbat-handler.c.o: In function `lowbat_initialized':
[ 288s] /home/abuild/rpmbuild/BUILD/deviced-5.5.0/src/battery/lowbat-handler.c:102: multiple definition of `battery'
[ 288s] CMakeFiles/deviced.dir/src/battery/battery-time.c.o:/home/abuild/rpmbuild/BUILD/deviced-5.5.0/src/battery/battery-time.c:363: first defined here
Change-Id: Ibf76f7265dfc1bf41c2b8e72de3dd6ed888ab7fc
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
projects / platform / core / system / deviced.git / log