review.tizen.org Git - platform/kernel/linux-rpi.git/log

net/mlx5: DR, Can't go to uplink vport on RX rule

[ Upstream commit 5b2a2523eeea5f03d39a9d1ff1bad2e9f8eb98d2 ]

Go-To-Vport action on RX is not allowed when the vport is uplink.
In such case, the packet should be dropped.

Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: DR, Use the right GVMI number for drop action

[ Upstream commit 5665954293f13642f9c052ead83c1e9d8cff186f ]

When FW provides ICM addresses for drop RX/TX, the provided capability
is 64 bits that contain its GVMI as well as the ICM address itself.
In case of TX DROP this GVMI is different from the GVMI that the
domain is operating on.

This patch fixes the action to use these GVMI IDs, as provided by FW.

Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Bridge, fix multicast packets sent to uplink

[ Upstream commit ec7cc38ef9f83553102e84c82536971a81630739 ]

To enable multicast packets which are offloaded in bridge multicast
offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should
be set. Add this bit to FTE for the bridge multicast offload rules.

Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Bridge, Enable mcast in smfs steering mode

[ Upstream commit 653b7eb9d74426397c95061fd57da3063625af65 ]

In order to have mcast offloads the driver needs the following:
It should know if that mcast comes from wire port, in addition the flow
should not be marked as any specific source, that way it will give the
flexibility for the driver not to be depended on the way iterator
implemented in the FW.

Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: ec7cc38ef9f8 ("net/mlx5: Bridge, fix multicast packets sent to uplink")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix a WARN upon a callback command failure

[ Upstream commit cc8091587779cfaddb6b29c9e9edb9079a282cad ]

The below WARN [1] is reported once a callback command failed.

As a callback runs under an interrupt context, needs to use the IRQ
save/restore variant.

[1]
DEBUG_LOCKS_WARN_ON(lockdep_hardirq_context())
WARNING: CPU: 15 PID: 0 at kernel/locking/lockdep.c:4353
              lockdep_hardirqs_on_prepare+0x11b/0x180
Modules linked in: vhost_net vhost tap mlx5_vfio_pci
vfio_pci vfio_pci_core vfio_iommu_type1 vfio mlx5_vdpa vringh
vhost_iotlb vdpa nfnetlink_cttimeout openvswitch nsh ip6table_mangle
ip6table_nat ip6table_filter ip6_tables iptable_mangle
xt_conntrackxt_MASQUERADE nf_conntrack_netlink nfnetlink
xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5
auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi
scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm
mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 15 PID: 0 Comm: swapper/15 Tainted: G        W 6.7.0-rc4+ #1587
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockdep_hardirqs_on_prepare+0x11b/0x180
Code: 00 5b c3 c3 e8 e6 0d 58 00 85 c0 74 d6 8b 15 f0 c3
      76 01 85 d2 75 cc 48 c7 c6 04 a5 3b 82 48 c7 c7 f1
      e9 39 82 e8 95 12 f9 ff <0f> 0b 5b c3 e8 bc 0d 58 00
      85 c0 74 ac 8b 3d c6 c3 76 01 85 ff 75
RSP: 0018:ffffc900003ecd18 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: 0000000000000000 RSI: ffff88885fbdb880 RDI: ffff88885fbdb888
RBP: 00000000ffffff87 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 284e4f5f4e524157 R12: 00000000002c9aa1
R13: ffff88810aace980 R14: ffff88810aace9b8 R15: 0000000000000003
FS:  0000000000000000(0000) GS:ffff88885fbc0000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f731436f4c8 CR3: 000000010aae6001 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? __warn+0x81/0x170
? lockdep_hardirqs_on_prepare+0x11b/0x180
? report_bug+0xf8/0x1c0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? lockdep_hardirqs_on_prepare+0x11b/0x180
? lockdep_hardirqs_on_prepare+0x11b/0x180
trace_hardirqs_on+0x4a/0xa0
raw_spin_unlock_irq+0x24/0x30
cmd_status_err+0xc0/0x1a0 [mlx5_core]
cmd_status_err+0x1a0/0x1a0 [mlx5_core]
mlx5_cmd_exec_cb_handler+0x24/0x40 [mlx5_core]
mlx5_cmd_comp_handler+0x129/0x4b0 [mlx5_core]
cmd_comp_notifier+0x1a/0x20 [mlx5_core]
notifier_call_chain+0x3e/0xe0
atomic_notifier_call_chain+0x5f/0x130
mlx5_eq_async_int+0xe7/0x200 [mlx5_core]
notifier_call_chain+0x3e/0xe0
atomic_notifier_call_chain+0x5f/0x130
irq_int_handler+0x11/0x20 [mlx5_core]
__handle_irq_event_percpu+0x99/0x220
? tick_irq_enter+0x5d/0x80
handle_irq_event_percpu+0xf/0x40
handle_irq_event+0x3a/0x60
handle_edge_irq+0xa2/0x1c0
__common_interrupt+0x55/0x140
common_interrupt+0x7d/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0x13/0x20
Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff
ff ff cc cc cc cc 8b 05 ea 08 25 01 85 c0 7e 07 0f 00 2d 7f b0 26 00 fb
f4 <fa> c3 90 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 80 d0 02 00
RSP: 0018:ffffc9000010fec8 EFLAGS: 00000242
RAX: 0000000000000001 RBX: 000000000000000f RCX: 4000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff811c410c
RBP: ffffffff829478c0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle+0x1ec/0x210
default_idle_call+0x6c/0x90
do_idle+0x1ec/0x210
cpu_startup_entry+0x26/0x30
start_secondary+0x11b/0x150
secondary_startup_64_no_verify+0x165/0x16b
</TASK>
irq event stamp: 833284
hardirqs last  enabled at (833283): [<ffffffff811c410c>]
do_idle+0x1ec/0x210
hardirqs last disabled at (833284): [<ffffffff81daf9ef>]
common_interrupt+0xf/0xa0
softirqs last  enabled at (833224): [<ffffffff81dc199f>]
__do_softirq+0x2bf/0x40e
softirqs last disabled at (833177): [<ffffffff81178ddf>]
irq_exit_rcu+0x7f/0xa0

Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix peer flow lists handling

[ Upstream commit d76fdd31f953ac5046555171620f2562715e9b71 ]

The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP
flag when list of peer flows has become empty. However, if any concurrent
user holds a reference to a peer flow (for example, the neighbor update
workqueue task is updating peer flow's parent encap entry concurrently),
then the flow will not be removed from the peer list and, consecutively,
DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls
mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm
will try to remove the flow from eswitch instances that it has never peered
with causing either NULL pointer dereference when trying to remove the flow
peer list head of peer_index that was never initialized or a warning if the
list debug config is enabled[0].

Fix the issue by always removing the peer flow from the list even when not
releasing the last reference to it.

[0]:

[ 3102.985806] ------------[ cut here ]------------
[ 3102.986223] list_del corruption, ffff888139110698->next is NULL
[ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0
[ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg
ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding]
[ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3
[ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0
[ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b
[ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286
[ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640
[ 3102.997188] DEL flow 00000000be367878 on port 0
[ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff
[ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100
[ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240
[ 3103.000790] FS:  00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000
[ 3103.001486] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0
[ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3103.003787] Call Trace:
[ 3103.004055]  <TASK>
[ 3103.004297]  ? __warn+0x7d/0x130
[ 3103.004623]  ? __list_del_entry_valid_or_report+0x4f/0xc0
[ 3103.005094]  ? report_bug+0xf1/0x1c0
[ 3103.005439]  ? console_unlock+0x4a/0xd0
[ 3103.005806]  ? handle_bug+0x3f/0x70
[ 3103.006149]  ? exc_invalid_op+0x13/0x60
[ 3103.006531]  ? asm_exc_invalid_op+0x16/0x20
[ 3103.007430]  ? __list_del_entry_valid_or_report+0x4f/0xc0
[ 3103.007910]  mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core]
[ 3103.008463]  mlx5e_tc_del_flow+0x46/0x270 [mlx5_core]
[ 3103.008944]  mlx5e_flow_put+0x26/0x50 [mlx5_core]
[ 3103.009401]  mlx5e_delete_flower+0x25f/0x380 [mlx5_core]
[ 3103.009901]  tc_setup_cb_destroy+0xab/0x180
[ 3103.010292]  fl_hw_destroy_filter+0x99/0xc0 [cls_flower]
[ 3103.010779]  __fl_delete+0x2d4/0x2f0 [cls_flower]
[ 3103.011207]  fl_delete+0x36/0x80 [cls_flower]
[ 3103.011614]  tc_del_tfilter+0x56f/0x750
[ 3103.011982]  rtnetlink_rcv_msg+0xff/0x3a0
[ 3103.012362]  ? netlink_ack+0x1c7/0x4e0
[ 3103.012719]  ? rtnl_calcit.isra.44+0x130/0x130
[ 3103.013134]  netlink_rcv_skb+0x54/0x100
[ 3103.013533]  netlink_unicast+0x1ca/0x2b0
[ 3103.013902]  netlink_sendmsg+0x361/0x4d0
[ 3103.014269]  __sock_sendmsg+0x38/0x60
[ 3103.014643]  ____sys_sendmsg+0x1f2/0x200
[ 3103.015018]  ? copy_msghdr_from_user+0x72/0xa0
[ 3103.015265]  ___sys_sendmsg+0x87/0xd0
[ 3103.016608]  ? copy_msghdr_from_user+0x72/0xa0
[ 3103.017014]  ? ___sys_recvmsg+0x9b/0xd0
[ 3103.017381]  ? ttwu_do_activate.isra.137+0x58/0x180
[ 3103.017821]  ? wake_up_q+0x49/0x90
[ 3103.018157]  ? futex_wake+0x137/0x160
[ 3103.018521]  ? __sys_sendmsg+0x51/0x90
[ 3103.018882]  __sys_sendmsg+0x51/0x90
[ 3103.019230]  ? exit_to_user_mode_prepare+0x56/0x130
[ 3103.019670]  do_syscall_64+0x3c/0x80
[ 3103.020017]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 3103.020469] RIP: 0033:0x7f4254811ef4
[ 3103.020816] Code: 89 f3 48 83 ec 10 48 89 7c 24 08 48 89 14 24 e8 42 eb ff ff 48 8b 14 24 41 89 c0 48 89 de 48 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 48 89 04 24 e8 78 eb ff ff 48 8b
[ 3103.022290] RSP: 002b:00007f424cdd9480 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 3103.022970] RAX: ffffffffffffffda RBX: 00007f424cdd9510 RCX: 00007f4254811ef4
[ 3103.023564] RDX: 0000000000000000 RSI: 00007f424cdd9510 RDI: 0000000000000012
[ 3103.024158] RBP: 00007f424cdda238 R08: 0000000000000000 R09: 00007f41d801a4b0
[ 3103.024748] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001
[ 3103.025341] R13: 00007f424cdd9510 R14: 00007f424cdda240 R15: 00007f424cdd99a0
[ 3103.025931]  </TASK>
[ 3103.026182] ---[ end trace 0000000000000000 ]---
[ 3103.027033] ------------[ cut here ]------------

Fixes: 9be6c21fdcf8 ("net/mlx5e: Handle offloads flows per peer")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context

[ Upstream commit 3876638b2c7ebb2c9d181de1191db0de8cac143a ]

Indirection (*) is of lower precedence than postfix increment (++). Logic
in napi_poll context would cause an out-of-bound read by first increment
the pointer address by byte address space and then dereference the value.
Rather, the intended logic was to dereference first and then increment the
underlying value.

Fixes: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: flower: Fix chain template offload

[ Upstream commit 32f2a0afa95fae0d1ceec2ff06e0e816939964b8 ]

When a qdisc is deleted from a net device the stack instructs the
underlying driver to remove its flow offload callback from the
associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack
then continues to replay the removal of the filters in the block for
this driver by iterating over the chains in the block and invoking the
'reoffload' operation of the classifier being used. In turn, the
classifier in its 'reoffload' operation prepares and emits a
'FLOW_CLS_DESTROY' command for each filter.

However, the stack does not do the same for chain templates and the
underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when
a qdisc is deleted. This results in a memory leak [1] which can be
reproduced using [2].

Fix by introducing a 'tmplt_reoffload' operation and have the stack
invoke it with the appropriate arguments as part of the replay.
Implement the operation in the sole classifier that supports chain
templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}'
command based on whether a flow offload callback is being bound to a
filter block or being unbound from one.

As far as I can tell, the issue happens since cited commit which
reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains()
in __tcf_block_put(). The order cannot be reversed as the filter block
is expected to be freed after flushing all the chains.

[1]
unreferenced object 0xffff888107e28800 (size 2048):
  comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
  hex dump (first 32 bytes):
    b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff  ..|......[......
    01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff  ................
  backtrace:
    [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
    [<ffffffff81ab374e>] __kmalloc+0x4e/0x90
    [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0
    [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
    [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
    [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
    [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
    [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
    [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
    [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff83ac6270>] netlink_unicast+0x540/0x820
    [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
    [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
    [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0
    [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0
    [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0
unreferenced object 0xffff88816d2c0400 (size 1024):
  comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
  hex dump (first 32 bytes):
    40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00  @.......W.8.....
    10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff  ..,m......,m....
  backtrace:
    [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
    [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90
    [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0
    [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460
    [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0
    [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0
    [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
    [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
    [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
    [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
    [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
    [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
    [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff83ac6270>] netlink_unicast+0x540/0x820
    [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
    [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80

[2]
# tc qdisc add dev swp1 clsact
# tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32
# tc qdisc del dev swp1 clsact
# devlink dev reload pci/0000:06:00.0

Fixes: bbf73830cd48 ("net: sched: traverse chains in block with tcf_get_next_chain()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: fill in some missing configs for net

[ Upstream commit 04fe7c5029cbdbcdb28917f09a958d939a8f19f7 ]

We are missing a lot of config options from net selftests,
it seems:

tun/tap:     CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP
fib_tests:   CONFIG_NET_SCH_FQ_CODEL
l2tp:        CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH
sctp-vrf:    CONFIG_INET_DIAG
txtimestamp: CONFIG_NET_CLS_U32
vxlan_mdb:   CONFIG_BRIDGE_VLAN_FILTERING
gre_gso:     CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE
srv6_end_dt*_l3vpn:   CONFIG_IPV6_SEG6_LWTUNNEL
ip_local_port_range:  CONFIG_MPTCP
fib_test:    CONFIG_NET_CLS_BASIC
rtnetlink:   CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE
             CONFIG_NET_IPGRE, CONFIG_BONDING
fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING
vxlan_mdb:   CONFIG_NET_ACT_GACT
tls:         CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305
psample:     CONFIG_PSAMPLE
fcnal:       CONFIG_TCP_MD5SIG

Try to add them in a semi-alphabetical order.

Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask")
Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: init the accept_queue's spinlocks in inet6_create

[ Upstream commit 435e202d645c197dcfd39d7372eb2a56529b6640 ]

In commit 198bc90e0e73("tcp: make sure init the accept_queue's spinlocks
once"), the spinlocks of accept_queue are initialized only when socket is
created in the inet4 scenario. The locks are not initialized when socket
is created in the inet6 scenario. The kernel reports the following error:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107)
register_lock_class (kernel/locking/lockdep.c:1289)
__lock_acquire (kernel/locking/lockdep.c:5015)
lock_acquire.part.0 (kernel/locking/lockdep.c:5756)
_raw_spin_lock_bh (kernel/locking/spinlock.c:178)
inet_csk_listen_stop (net/ipv4/inet_connection_sock.c:1386)
tcp_disconnect (net/ipv4/tcp.c:2981)
inet_shutdown (net/ipv4/af_inet.c:935)
__sys_shutdown (./include/linux/file.h:32 net/socket.c:2438)
__x64_sys_shutdown (net/socket.c:2445)
do_syscall_64 (arch/x86/entry/common.c:52)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7f52ecd05a3d
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007f52ecf5dde8 EFLAGS: 00000293 ORIG_RAX: 0000000000000030
RAX: ffffffffffffffda RBX: 00007f52ecf5e640 RCX: 00007f52ecd05a3d
RDX: 00007f52ecc8b188 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00007f52ecf5de20 R08: 00007ffdae45c69f R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 00007f52ecf5e640
R13: 0000000000000000 R14: 00007f52ecc8b060 R15: 00007ffdae45c6e0

Fixes: 198bc90e0e73 ("tcp: make sure init the accept_queue's spinlocks once")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240122102001.2851701-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: fix potential sleeping issue in mqueue_flush_file

[ Upstream commit 234ec0b6034b16869d45128b8cd2dc6ffe596f04 ]

I analyze the potential sleeping issue of the following processes:
Thread A                                Thread B
...                                     netlink_create  //ref = 1
do_mq_notify                            ...
  sock = netlink_getsockbyfilp          ...     //ref = 2
  info->notify_sock = sock;             ...
...                                     netlink_sendmsg
...                                       skb = netlink_alloc_large_skb  //skb->head is vmalloced
...                                       netlink_unicast
...                                         sk = netlink_getsockbyportid //ref = 3
...                                         netlink_sendskb
...                                           __netlink_sendskb
...                                             skb_queue_tail //put skb to sk_receive_queue
...                                         sock_put //ref = 2
...                                     ...
...                                     netlink_release
...                                       deferred_put_nlk_sk //ref = 1
mqueue_flush_file
  spin_lock
  remove_notification
    netlink_sendskb
      sock_put  //ref = 0
        sk_free
          ...
          __sk_destruct
            netlink_sock_destruct
              skb_queue_purge  //get skb from sk_receive_queue
                ...
                __skb_queue_purge_reason
                  kfree_skb_reason
                    __kfree_skb
                    ...
                    skb_release_all
                      skb_release_head_state
                        netlink_skb_destructor
                          vfree(skb->head)  //sleeping while holding spinlock

In netlink_sendmsg, if the memory pointed to by skb->head is allocated by
vmalloc, and is put to sk_receive_queue queue, also the skb is not freed.
When the mqueue executes flush, the sleeping bug will occur. Use
vfree_atomic instead of vfree in netlink_skb_destructor to solve the issue.

Fixes: c05cdb1b864f ("netlink: allow large data transfers from user-space")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20240122011807.2110357-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftest: Don't reuse port for SO_INCOMING_CPU test.

[ Upstream commit 97de5a15edf2d22184f5ff588656030bbb7fa358 ]

Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.

  # #  RUN           so_incoming_cpu.before_reuseport.test3 ...
  # # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
  # # test3: Test terminated by assertion
  # #          FAIL  so_incoming_cpu.before_reuseport.test3
  # not ok 3 so_incoming_cpu.before_reuseport.test3

When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.

The test basically does:

  1. for each cpu:
    1-1. create a server
    1-2. set SO_INCOMING_CPU

  2. for each cpu:
    2-1. set cpu affinity
    2-2. create some clients
    2-3. let clients connect() to the server on the same cpu
    2-4. close() clients

  3. for each server:
    3-1. accept() all child sockets
    3-2. check if all children have the same SO_INCOMING_CPU with the server

The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.

In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.

In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.

As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.

Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK.  The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.

This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).

To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.

Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Add memory barrier to tcp_push()

[ Upstream commit 7267e8dcad6b2f9fce05a6a06335d7040acbc2b6 ]

On CPUs with weak memory models, reads and updates performed by tcp_push
to the sk variables can get reordered leaving the socket throttled when
it should not. The tasklet running tcp_wfree() may also not observe the
memory updates in time and will skip flushing any packets throttled by
tcp_push(), delaying the sending. This can pathologically cause 40ms
extra latency due to bad interactions with delayed acks.

Adding a memory barrier in tcp_push removes the bug, similarly to the
previous commit bf06200e732d ("tcp: tsq: fix nonagle handling").
smp_mb__after_atomic() is used to not incur in unnecessary overhead
on x86 since not affected.

Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu
22.04 and Apache Tomcat 9.0.83 running the basic servlet below:

import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

public class HelloWorldServlet extends HttpServlet {
    @Override
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
      throws ServletException, IOException {
        response.setContentType("text/html;charset=utf-8");
        OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
        String s = "a".repeat(3096);
        osw.write(s,0,s.length());
        osw.flush();
    }
}

Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance. Before the patch an additional 40ms latency from P99.99+
values is observed while, with the patch, the extra latency disappears.

No patch and tcp_autocorking=1
./wrk -t32 -c128 -d40s --latency -R10000  http://172.31.60.173:8080/hello/hello
  ...
50.000%    0.91ms
75.000%    1.13ms
90.000%    1.46ms
99.000%    1.74ms
99.900%    1.89ms
99.990%   41.95ms  <<< 40+ ms extra latency
99.999%   48.32ms
100.000%   48.96ms

With patch and tcp_autocorking=1
./wrk -t32 -c128 -d40s --latency -R10000  http://172.31.60.173:8080/hello/hello
  ...
50.000%    0.90ms
75.000%    1.13ms
90.000%    1.45ms
99.000%    1.72ms
99.900%    1.83ms
99.990%    2.11ms  <<< no 40+ ms extra latency
99.999%    2.53ms
100.000%    2.62ms

Patch has been also tested on x86 (m7i.2xlarge instance) which it is not
affected by this issue and the patch doesn't introduce any additional
delay.

Fixes: 7aa5470c2c09 ("tcp: tsq: move tsq_flags close to sk_wmem_alloc")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240119190133.43698-1-dipiets@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Hide silly-rename files from userspace

[ Upstream commit 57e9d49c54528c49b8bffe6d99d782ea051ea534 ]

There appears to be a race between silly-rename files being created/removed
and various userspace tools iterating over the contents of a directory,
leading to such errors as:

find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory
tar: ./include/linux/greybus/.__afs3C95: File removed before we read it

when building a kernel.

Fix afs_readdir() so that it doesn't return .__afsXXXX silly-rename files
to userspace. This doesn't stop them being looked up directly by name as
we need to be able to look them up from within the kernel as part of the
silly-rename algorithm.

Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Ensure visibility when inserting an element into tracing_map

[ Upstream commit 2b44760609e9eaafc9d234a6883d042fc21132a7 ]

Running the following two commands in parallel on a multi-processor
AArch64 machine can sporadically produce an unexpected warning about
duplicate histogram entries:

$ while true; do
     echo hist:key=id.syscall:val=hitcount > \
       /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
     cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
     sleep 0.001
   done
$ stress-ng --sysbadaddr $(nproc)

The warning looks as follows:

[ 2911.172474] ------------[ cut here ]------------
[ 2911.173111] Duplicates detected: 1
[ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408
[ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E)
[ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1
[ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G            E      6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01
[ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018
[ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408
[ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408
[ 2911.185310] sp : ffff8000a1513900
[ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001
[ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008
[ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180
[ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff
[ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8
[ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731
[ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c
[ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8
[ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000
[ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480
[ 2911.194259] Call trace:
[ 2911.194626]  tracing_map_sort_entries+0x3e0/0x408
[ 2911.195220]  hist_show+0x124/0x800
[ 2911.195692]  seq_read_iter+0x1d4/0x4e8
[ 2911.196193]  seq_read+0xe8/0x138
[ 2911.196638]  vfs_read+0xc8/0x300
[ 2911.197078]  ksys_read+0x70/0x108
[ 2911.197534]  __arm64_sys_read+0x24/0x38
[ 2911.198046]  invoke_syscall+0x78/0x108
[ 2911.198553]  el0_svc_common.constprop.0+0xd0/0xf8
[ 2911.199157]  do_el0_svc+0x28/0x40
[ 2911.199613]  el0_svc+0x40/0x178
[ 2911.200048]  el0t_64_sync_handler+0x13c/0x158
[ 2911.200621]  el0t_64_sync+0x1a8/0x1b0
[ 2911.201115] ---[ end trace 0000000000000000 ]---

The problem appears to be caused by CPU reordering of writes issued from
__tracing_map_insert().

The check for the presence of an element with a given key in this
function is:

val = READ_ONCE(entry->val);
if (val && keys_match(key, val->key, map->key_size)) ...

The write of a new entry is:

elt = get_free_elt(map);
memcpy(elt->key, key, map->key_size);
entry->val = elt;

The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;"
stores may become visible in the reversed order on another CPU. This
second CPU might then incorrectly determine that a new key doesn't match
an already present val->key and subsequently insert a new element,
resulting in a duplicate.

Fix the problem by adding a write barrier between
"memcpy(elt->key, key, map->key_size);" and "entry->val = elt;", and for
good measure, also use WRITE_ONCE(entry->val, elt) for publishing the
element. The sequence pairs with the mentioned "READ_ONCE(entry->val);"
and the "val->key" check which has an address dependency.

The barrier is placed on a path executed when adding an element for
a new key. Subsequent updates targeting the same key remain unaffected.

From the user's perspective, the issue was introduced by commit
c193707dde77 ("tracing: Remove code which merges duplicates"), which
followed commit cbf4100efb8f ("tracing: Add support to detect and avoid
duplicates"). The previous code operated differently; it inherently
expected potential races which result in duplicates but merged them
later when they occurred.

Link: https://lore.kernel.org/linux-trace-kernel/20240122150928.27725-1-petr.pavlu@suse.com
Fixes: c193707dde77 ("tracing: Remove code which merges duplicates")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfs, fscache: Prevent Oops in fscache_put_cache()

[ Upstream commit 3be0b3ed1d76c6703b9ee482b55f7e01c369cc68 ]

This function dereferences "cache" and then checks if it's
IS_ERR_OR_NULL(). Check first, then dereference.

Fixes: 9549332df4ed ("fscache: Implement cache registration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/e84bc740-3502-4f16-982a-a40d5676615c@moroto.mountain/
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rds: Fix UBSAN: array-index-out-of-bounds in rds_cmsg_recv

[ Upstream commit 13e788deb7348cc88df34bed736c3b3b9927ea52 ]

Syzcaller UBSAN crash occurs in rds_cmsg_recv(),
which reads inc->i_rx_lat_trace[j + 1] with index 4 (3 + 1),
but with array size of 4 (RDS_RX_MAX_TRACES).
Here 'j' is assigned from rs->rs_rx_trace[i] and in-turn from
trace.rx_trace_pos[i] in rds_recv_track_latency(),
with both arrays sized 3 (RDS_MSG_RX_DGRAM_TRACE_MAX). So fix the
off-by-one bounds check in rds_recv_track_latency() to prevent
a potential crash in rds_cmsg_recv().

Found by syzcaller:
=================================================================
UBSAN: array-index-out-of-bounds in net/rds/recv.c:585:39
index 4 is out of range for type 'u64 [4]'
CPU: 1 PID: 8058 Comm: syz-executor228 Not tainted 6.6.0-gd2f51b3516da #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x136/0x150 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0xd5/0x130 lib/ubsan.c:348
rds_cmsg_recv+0x60d/0x700 net/rds/recv.c:585
rds_recvmsg+0x3fb/0x1610 net/rds/recv.c:716
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1066
__sys_recvfrom+0x1b6/0x2f0 net/socket.c:2246
__do_sys_recvfrom net/socket.c:2264 [inline]
__se_sys_recvfrom net/socket.c:2260 [inline]
__x64_sys_recvfrom+0xe0/0x1b0 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
==================================================================

Fixes: 3289025aedc0 ("RDS: add receive message trace used by application")
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/linux-rdma/CALGdzuoVdq-wtQ4Az9iottBqC5cv9ZhcE5q8N7LfYFvkRsOVcw@mail.gmail.com/
Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: micrel: Fix PTP frame parsing for lan8814

[ Upstream commit aaf632f7ab6dec57bc9329a438f94504fe8034b9 ]

The HW has the capability to check each frame if it is a PTP frame,
which domain it is, which ptp frame type it is, different ip address in
the frame. And if one of these checks fail then the frame is not
timestamp. Most of these checks were disabled except checking the field
minorVersionPTP inside the PTP header. Meaning that once a partner sends
a frame compliant to 8021AS which has minorVersionPTP set to 1, then the
frame was not timestamp because the HW expected by default a value of 0
in minorVersionPTP. This is exactly the same issue as on lan8841.
Fix this issue by removing this check so the userspace can decide on this.

Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tun: add missing rx stats accounting in tun_xdp_act

[ Upstream commit f1084c427f55d573fcd5688d9ba7b31b78019716 ]

The TUN can be used as vhost-net backend, and it is necessary to
count the packets transmitted from TUN to vhost-net/virtio-net.
However, there are some places in the receive path that were not
taken into account when using XDP. It would be beneficial to also
include new accounting for successfully received bytes using
dev_sw_netstats_rx_add.

Fixes: 761876c857cb ("tap: XDP support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tun: fix missing dropped counter in tun_xdp_act

[ Upstream commit 5744ba05e7c4bff8fec133dd0f9e51ddffba92f5 ]

The commit 8ae1aff0b331 ("tuntap: split out XDP logic") includes
dropped counter for XDP_DROP, XDP_ABORTED, and invalid XDP actions.
Unfortunately, that commit missed the dropped counter when error
occurs during XDP_TX and XDP_REDIRECT actions. This patch fixes
this issue.

Fixes: 8ae1aff0b331 ("tuntap: split out XDP logic")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix removing a namespace with conflicting altnames

[ Upstream commit d09486a04f5da0a812c26217213b89a3b1acf836 ]

Mark reports a BUG() when a net namespace is removed.

kernel BUG at net/core/dev.c:11520!

Physical interfaces moved outside of init_net get "refunded"
to init_net when that namespace disappears. The main interface
name may get overwritten in the process if it would have
conflicted. We need to also discard all conflicting altnames.
Recent fixes addressed ensuring that altnames get moved
with the main interface, which surfaced this problem.

Reported-by: Марк Коренберг <socketpair@gmail.com>
Link: https://lore.kernel.org/all/CAEmTpZFZ4Sv3KwqFOY2WKDHeZYdi0O7N5H1nTvcGp=SAEavtDg@mail.gmail.com/
Fixes: 7663d522099e ("net: check for altname conflicts when changing netdev's netns")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp: fix busy polling

[ Upstream commit a54d51fb2dfb846aedf3751af501e9688db447f5 ]

Generic sk_busy_loop_end() only looks at sk->sk_receive_queue
for presence of packets.

Problem is that for UDP sockets after blamed commit, some packets
could be present in another queue: udp_sk(sk)->reader_queue

In some cases, a busy poller could spin until timeout expiration,
even if some packets are available in udp_sk(sk)->reader_queue.

v3: - make sk_busy_loop_end() nicer (Willem)

v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats.
- add a sk_is_inet() check in sk_is_udp() (Willem feedback)
- add a sk_is_inet() check in sk_is_tcp().

Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

llc: Drop support for ETH_P_TR_802_2.

[ Upstream commit e3f9bed9bee261e3347131764e42aeedf1ffea61 ]

syzbot reported an uninit-value bug below. [0]

llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2
(0x0011), and syzbot abused the latter to trigger the bug.

write$tun(r0, &(0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', "90e5dd"}}}}, 0x16)

llc_conn_handler() initialises local variables {saddr,daddr}.mac
based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes
them to __llc_lookup().

However, the initialisation is done only when skb->protocol is
htons(ETH_P_802_2), otherwise, __llc_lookup_established() and
__llc_lookup_listener() will read garbage.

The missing initialisation existed prior to commit 211ed865108e
("net: delete all instances of special processing for token ring").

It removed the part to kick out the token ring stuff but forgot to
close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv().

Let's remove llc_tr_packet_type and complete the deprecation.

[0]:
BUG: KMSAN: uninit-value in __llc_lookup_established+0xe9d/0xf90
__llc_lookup_established+0xe9d/0xf90
__llc_lookup net/llc/llc_conn.c:611 [inline]
llc_conn_handler+0x4bd/0x1360 net/llc/llc_conn.c:791
llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206
__netif_receive_skb_one_core net/core/dev.c:5527 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5641
netif_receive_skb_internal net/core/dev.c:5727 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5786
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x8ef/0x1490 fs/read_write.c:584
ksys_write+0x20f/0x4c0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Local variable daddr created at:
llc_conn_handler+0x53/0x1360 net/llc/llc_conn.c:783
llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206

CPU: 1 PID: 5004 Comm: syz-executor994 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023

Fixes: 211ed865108e ("net: delete all instances of special processing for token ring")
Reported-by: syzbot+b5ad66046b913bc04c6f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b5ad66046b913bc04c6f
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240119015515.61898-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

llc: make llc_ui_sendmsg() more robust against bonding changes

[ Upstream commit dad555c816a50c6a6a8a86be1f9177673918c647 ]

syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no
headroom, but subsequently trying to push 14 bytes of Ethernet header [1]

Like some others, llc_ui_sendmsg() releases the socket lock before
calling sock_alloc_send_skb().
Then it acquires it again, but does not redo all the sanity checks
that were performed.

This fix:

- Uses LL_RESERVED_SPACE() to reserve space.
- Check all conditions again after socket lock is held again.
- Do not account Ethernet header for mtu limitation.

[1]

skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0

kernel BUG at net/core/skbuff.c:193 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:189 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203
lr : skb_panic net/core/skbuff.c:189 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203
sp : ffff800096f97000
x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000
x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2
x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0
x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce
x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001
x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400
x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
  skb_panic net/core/skbuff.c:189 [inline]
  skb_under_panic+0x13c/0x140 net/core/skbuff.c:203
  skb_push+0xf0/0x108 net/core/skbuff.c:2451
  eth_header+0x44/0x1f8 net/ethernet/eth.c:83
  dev_hard_header include/linux/netdevice.h:3188 [inline]
  llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33
  llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85
  llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline]
  llc_sap_next_state net/llc/llc_sap.c:182 [inline]
  llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209
  llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270
  llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  sock_sendmsg+0x194/0x274 net/socket.c:767
  splice_to_socket+0x7cc/0xd58 fs/splice.c:881
  do_splice_from fs/splice.c:933 [inline]
  direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142
  splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088
  do_splice_direct+0x20c/0x348 fs/splice.c:1194
  do_sendfile+0x4bc/0xc70 fs/read_write.c:1254
  __do_sys_sendfile64 fs/read_write.c:1322 [inline]
  __se_sys_sendfile64 fs/read_write.c:1308 [inline]
  __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308
  __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
  invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
  el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
  do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
  el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678
  el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
  el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595
Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+2a7024e9502df538e8ef@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240118183625.4007013-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vlan: skip nested type that is not IFLA_VLAN_QOS_MAPPING

[ Upstream commit 6c21660fe221a15c789dee2bc2fd95516bc5aeaf ]

In the vlan_changelink function, a loop is used to parse the nested
attributes IFLA_VLAN_EGRESS_QOS and IFLA_VLAN_INGRESS_QOS in order to
obtain the struct ifla_vlan_qos_mapping. These two nested attributes are
checked in the vlan_validate_qos_map function, which calls
nla_validate_nested_deprecated with the vlan_map_policy.

However, this deprecated validator applies a LIBERAL strictness, allowing
the presence of an attribute with the type IFLA_VLAN_QOS_UNSPEC.
Consequently, the loop in vlan_changelink may parse an attribute of type
IFLA_VLAN_QOS_UNSPEC and believe it carries a payload of
struct ifla_vlan_qos_mapping, which is not necessarily true.

To address this issue and ensure compatibility, this patch introduces two
type checks that skip attributes whose type is not IFLA_VLAN_QOS_MAPPING.

Fixes: 07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240118130306.1644001-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Prevent kernel warning when running offline self test

[ Upstream commit c20f482129a582455f02eb9a6dcb2a4215274599 ]

We call bnxt_half_open_nic() to setup the chip partially to run
loopback tests.  The rings and buffers are initialized normally
so that we can transmit and receive packets in loopback mode.
That means page pool buffers are allocated for the aggregation ring
just like the normal case.  NAPI is not needed because we are just
polling for the loopback packets.

When we're done with the loopback tests, we call bnxt_half_close_nic()
to clean up.  When freeing the page pools, we hit a WARN_ON()
in page_pool_unlink_napi() because the NAPI state linked to the
page pool is uninitialized.

The simplest way to avoid this warning is just to initialize the
NAPIs during half open and delete the NAPIs during half close.
Trying to skip the page pool initialization or skip linking of
NAPI during half open will be more complicated.

This fix avoids this warning:

WARNING: CPU: 4 PID: 46967 at net/core/page_pool.c:946 page_pool_unlink_napi+0x1f/0x30
CPU: 4 PID: 46967 Comm: ethtool Tainted: G S      W          6.7.0-rc5+ #22
Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021
RIP: 0010:page_pool_unlink_napi+0x1f/0x30
Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 18 48 85 c0 74 1b 48 8b 50 10 83 e2 01 74 08 8b 40 34 83 f8 ff 74 02 <0f> 0b 48 c7 47 18 00 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90
RSP: 0018:ffa000003d0dfbe8 EFLAGS: 00010246
RAX: ff110003607ce640 RBX: ff110010baf5d000 RCX: 0000000000000008
RDX: 0000000000000000 RSI: ff110001e5e522c0 RDI: ff110010baf5d000
RBP: ff11000145539b40 R08: 0000000000000001 R09: ffffffffc063f641
R10: ff110001361eddb8 R11: 000000000040000f R12: 0000000000000001
R13: 000000000000001c R14: ff1100014553a080 R15: 0000000000003fc0
FS:  00007f9301c4f740(0000) GS:ff1100103fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91344fa8f0 CR3: 00000003527cc005 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x81/0x140
? page_pool_unlink_napi+0x1f/0x30
? report_bug+0x102/0x200
? handle_bug+0x44/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? bnxt_free_ring.isra.123+0xb1/0xd0 [bnxt_en]
? page_pool_unlink_napi+0x1f/0x30
page_pool_destroy+0x3e/0x150
bnxt_free_mem+0x441/0x5e0 [bnxt_en]
bnxt_half_close_nic+0x2a/0x40 [bnxt_en]
bnxt_self_test+0x21d/0x450 [bnxt_en]
__dev_ethtool+0xeda/0x2e30
? native_queued_spin_lock_slowpath+0x17f/0x2b0
? __link_object+0xa1/0x160
? _raw_spin_unlock_irqrestore+0x23/0x40
? __create_object+0x5f/0x90
? __kmem_cache_alloc_node+0x317/0x3c0
? dev_ethtool+0x59/0x170
dev_ethtool+0xa7/0x170
dev_ioctl+0xc3/0x530
sock_do_ioctl+0xa8/0xf0
sock_ioctl+0x270/0x310
__x64_sys_ioctl+0x8c/0xc0
do_syscall_64+0x3e/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76

Fixes: 294e39e0d034 ("bnxt: hook NAPIs to page pools")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Wait for FLR to complete during probe

[ Upstream commit 3c1069fa42872f95cf3c6fedf80723d391e12d57 ]

The first message to firmware may fail if the device is undergoing FLR.
The driver has some recovery logic for this failure scenario but we must
wait 100 msec for FLR to complete before proceeding. Otherwise the
recovery will always fail.

Fixes: ba02629ff6cb ("bnxt_en: log firmware status on firmware init failure")
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: make sure init the accept_queue's spinlocks once

[ Upstream commit 198bc90e0e734e5f98c3d2833e8390cac3df61b2 ]

When I run syz's reproduction C program locally, it causes the following
issue:
pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0!
WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7
30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900
RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff
R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000
R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000
FS:  00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0
Call Trace:
<IRQ>
  _raw_spin_unlock (kernel/locking/spinlock.c:186)
  inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321)
  inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358)
  tcp_check_req (net/ipv4/tcp_minisocks.c:868)
  tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260)
  ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205)
  ip_local_deliver_finish (net/ipv4/ip_input.c:234)
  __netif_receive_skb_one_core (net/core/dev.c:5529)
  process_backlog (./include/linux/rcupdate.h:779)
  __napi_poll (net/core/dev.c:6533)
  net_rx_action (net/core/dev.c:6604)
  __do_softirq (./arch/x86/include/asm/jump_label.h:27)
  do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
</IRQ>
<TASK>
  __local_bh_enable_ip (kernel/softirq.c:381)
  __dev_queue_xmit (net/core/dev.c:4374)
  ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235)
  __ip_queue_xmit (net/ipv4/ip_output.c:535)
  __tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
  tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469)
  tcp_rcv_state_process (net/ipv4/tcp_input.c:6657)
  tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929)
  __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968)
  release_sock (net/core/sock.c:3536)
  inet_wait_for_connect (net/ipv4/af_inet.c:609)
  __inet_stream_connect (net/ipv4/af_inet.c:702)
  inet_stream_connect (net/ipv4/af_inet.c:748)
  __sys_connect (./include/linux/file.h:45 net/socket.c:2064)
  __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070)
  do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82)
  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
  RIP: 0033:0x7fa10ff05a3d
  Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89
  c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48
  RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
  RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d
  RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
  RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640
  R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20
</TASK>

The issue triggering process is analyzed as follows:
Thread A                                       Thread B
tcp_v4_rcv //receive ack TCP packet       inet_shutdown
  tcp_check_req                                  tcp_disconnect //disconnect sock
  ...                                              tcp_set_state(sk, TCP_CLOSE)
    inet_csk_complete_hashdance                ...
      inet_csk_reqsk_queue_add                 inet_listen  //start listen
        spin_lock(&queue->rskq_lock)             inet_csk_listen_start
        ...                                        reqsk_queue_alloc
        ...                                          spin_lock_init
        spin_unlock(&queue->rskq_lock) //warning

When the socket receives the ACK packet during the three-way handshake,
it will hold spinlock. And then the user actively shutdowns the socket
and listens to the socket immediately, the spinlock will be initialized.
When the socket is going to release the spinlock, a warning is generated.
Also the same issue to fastopenq.lock.

Move init spinlock to inet_create and inet_accept to make sure init the
accept_queue's spinlocks once.

Fixes: fff1f3001cc5 ("tcp: add a spinlock to protect struct request_sock_queue")
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Reported-by: Ming Shu <sming56@aliyun.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240118012019.1751966-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: bonding: Increase timeout to 1200s

[ Upstream commit b01f15a7571b7aa222458bc9bf26ab59bd84e384 ]

When tests are run by runner.sh, bond_options.sh gets killed before
it can complete:

make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding"
[...]
# timeout set to 120
# selftests: drivers/net/bonding: bond_options.sh
# TEST: prio (active-backup miimon primary_reselect 0)                [ OK ]
# TEST: prio (active-backup miimon primary_reselect 1)                [ OK ]
# TEST: prio (active-backup miimon primary_reselect 2)                [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 0)         [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 1)         [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 2)         [ OK ]
#
not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds

This test includes many sleep statements, at least some of which are
related to timers in the operation of the bonding driver itself. Increase
the test timeout to allow the test to complete.

I ran the test in slightly different VMs (including one without HW
virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and
13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s.

Fixes: 42a8d4aaea84 ("selftests: bonding: add bonding prio option test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix illegal rmb_desc access in SMC-D connection dump

[ Upstream commit dbc153fd3c142909e564bb256da087e13fbf239c ]

A crash was found when dumping SMC-D connections. It can be reproduced
by following steps:

- run nginx/wrk test:
  smc_run nginx
  smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL>

- continuously dump SMC-D connections in parallel:
  watch -n 1 'smcss -D'

BUG: kernel NULL pointer dereference, address: 0000000000000030
CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E      6.7.0+ #55
RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
Call Trace:
  <TASK>
  ? __die+0x24/0x70
  ? page_fault_oops+0x66/0x150
  ? exc_page_fault+0x69/0x140
  ? asm_exc_page_fault+0x26/0x30
  ? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
  ? __kmalloc_node_track_caller+0x35d/0x430
  ? __alloc_skb+0x77/0x170
  smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
  smc_diag_dump+0x26/0x60 [smc_diag]
  netlink_dump+0x19f/0x320
  __netlink_dump_start+0x1dc/0x300
  smc_diag_handler_dump+0x6a/0x80 [smc_diag]
  ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
  sock_diag_rcv_msg+0x121/0x140
  ? __pfx_sock_diag_rcv_msg+0x10/0x10
  netlink_rcv_skb+0x5a/0x110
  sock_diag_rcv+0x28/0x40
  netlink_unicast+0x22a/0x330
  netlink_sendmsg+0x1f8/0x420
  __sock_sendmsg+0xb0/0xc0
  ____sys_sendmsg+0x24e/0x300
  ? copy_msghdr_from_user+0x62/0x80
  ___sys_sendmsg+0x7c/0xd0
  ? __do_fault+0x34/0x160
  ? do_read_fault+0x5f/0x100
  ? do_fault+0xb0/0x110
  ? __handle_mm_fault+0x2b0/0x6c0
  __sys_sendmsg+0x4d/0x80
  do_syscall_64+0x69/0x180
  entry_SYSCALL_64_after_hwframe+0x6e/0x76

It is possible that the connection is in process of being established
when we dump it. Assumed that the connection has been registered in a
link group by smc_conn_create() but the rmb_desc has not yet been
initialized by smc_buf_create(), thus causing the illegal access to
conn->rmb_desc. So fix it by checking before dump.

Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix potential sta-link leak

[ Upstream commit b01a74b3ca6fd51b62c67733ba7c3280fa6c5d26 ]

When a station is allocated, links are added but not
set to valid yet (e.g. during connection to an AP MLD),
we might remove the station without ever marking links
valid, and leak them. Fix that.

Fixes: cb71f1d136a6 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.6573998beaf8.I09ac2e1d41c80f82a5a616b8bd1d9d8dd709a6a6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: use request size to initialize bio_vec in svc_udp_sendto()

[ Upstream commit 1d9cabe2817edd215779dc9c2fe5e7ab9aac0704 ]

Use the proper size when setting up the bio_vec, as otherwise only
zero-length UDP packets will be sent.

Fixes: baabf59c2414 ("SUNRPC: Convert svc_udp_sendto() to use the per-socket bio_vec array")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: after disabling multichannel, mark tcon for reconnect

commit 27e1fd343f80168ff456785c2443136b6b7ca3cc upstream.

Once the server disables multichannel for an active multichannel
session, on the following reconnect, the client would reduce
the number of channels to 1. However, it could be the case that
the tree connect was active on one of these disabled channels.
This results in an unrecoverable state.

This change fixes that by making sure that whenever a channel
is being terminated, the session and tcon are marked for
reconnect too. This could mean a few redundant tree connect
calls to the server, but considering that this is not a frequent
event, we should be okay.

Fixes: ee1d21794e55 ("cifs: handle when server stops supporting multichannel")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix a pending undercount of srv_count

commit f30bbc38704e279c06d073ecb18fea376791ecab upstream.

The following commit reverted the changes to ref count
the server struct while scheduling a reconnect work:
823342524868 Revert "cifs: reconnect work should have reference on server struct"

However, a following change also introduced scheduling
of reconnect work, and assumed ref counting. This change
fixes that as well.

Fixes umount problems like:

[73496.157838] CPU: 5 PID: 1321389 Comm: umount Tainted: G        W  OE      6.7.0-060700rc6-generic #202312172332
[73496.157841] Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET67W (1.50 ) 12/15/2022
[73496.157843] RIP: 0010:cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.157906] Code: 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc e8 4a 6e 14 e6 e9 f6 fe ff ff be 03 00 00 00 48 89 d7 e8 78 26 b3 e5 e9 e4 fe ff ff <0f> 0b e9 b1 fe ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90
[73496.157908] RSP: 0018:ffffc90003bcbcb8 EFLAGS: 00010286
[73496.157911] RAX: 00000000ffffffff RBX: ffff8885830fa800 RCX: 0000000000000000
[73496.157913] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[73496.157915] RBP: ffffc90003bcbcc8 R08: 0000000000000000 R09: 0000000000000000
[73496.157917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[73496.157918] R13: ffff8887d56ba800 R14: 00000000ffffffff R15: ffff8885830fa800
[73496.157920] FS:  00007f1ff0e33800(0000) GS:ffff88887ba80000(0000) knlGS:0000000000000000
[73496.157922] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[73496.157924] CR2: 0000115f002e2010 CR3: 00000003d1e24005 CR4: 00000000003706f0
[73496.157926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[73496.157928] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[73496.157929] Call Trace:
[73496.157931]  <TASK>
[73496.157933]  ? show_regs+0x6d/0x80
[73496.157936]  ? __warn+0x89/0x160
[73496.157939]  ? cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.157976]  ? report_bug+0x17e/0x1b0
[73496.157980]  ? handle_bug+0x51/0xa0
[73496.157983]  ? exc_invalid_op+0x18/0x80
[73496.157985]  ? asm_exc_invalid_op+0x1b/0x20
[73496.157989]  ? cifs_put_tcp_session+0x17d/0x190 [cifs]
[73496.158023]  ? cifs_put_tcp_session+0x1e/0x190 [cifs]
[73496.158057]  __cifs_put_smb_ses+0x2b5/0x540 [cifs]
[73496.158090]  ? tconInfoFree+0xc2/0x120 [cifs]
[73496.158130]  cifs_put_tcon.part.0+0x108/0x2b0 [cifs]
[73496.158173]  cifs_put_tlink+0x49/0x90 [cifs]
[73496.158220]  cifs_umount+0x56/0xb0 [cifs]
[73496.158258]  cifs_kill_sb+0x52/0x60 [cifs]
[73496.158306]  deactivate_locked_super+0x32/0xc0
[73496.158309]  deactivate_super+0x46/0x60
[73496.158311]  cleanup_mnt+0xc3/0x170
[73496.158314]  __cleanup_mnt+0x12/0x20
[73496.158330]  task_work_run+0x5e/0xa0
[73496.158333]  exit_to_user_mode_loop+0x105/0x130
[73496.158336]  exit_to_user_mode_prepare+0xa5/0xb0
[73496.158338]  syscall_exit_to_user_mode+0x29/0x60
[73496.158341]  do_syscall_64+0x6c/0xf0
[73496.158344]  ? syscall_exit_to_user_mode+0x37/0x60
[73496.158346]  ? do_syscall_64+0x6c/0xf0
[73496.158349]  ? exit_to_user_mode_prepare+0x30/0xb0
[73496.158353]  ? syscall_exit_to_user_mode+0x37/0x60
[73496.158355]  ? do_syscall_64+0x6c/0xf0

Reported-by: Robert Morris <rtm@csail.mit.edu>
Fixes: 705fc522fe9d ("cifs: handle when server starts supporting multichannel")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix lock ordering while disabling multichannel

commit 5eef12c4e3230f2025dc46ad8c4a3bc19978e5d7 upstream.

The code to handle the case of server disabling multichannel
was picking iface_lock with chan_lock held. This goes against
the lock ordering rules, as iface_lock is a higher order lock
(even if it isn't so obvious).

This change fixes the lock ordering by doing the following in
that order for each secondary channel:
1. store iface and server pointers in local variable
2. remove references to iface and server in channels
3. unlock chan_lock
4. lock iface_lock
5. dec ref count for iface
6. unlock iface_lock
7. dec ref count for server
8. lock chan_lock again

Since this function can only be called in smb2_reconnect, and
that cannot be called by two parallel processes, we should not
have races due to dropping chan_lock between steps 3 and 8.

Fixes: ee1d21794e55 ("cifs: handle when server stops supporting multichannel")
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd: Enable PCIe PME from D3"

This reverts commit 847e6947afd3c46623172d2eabcfc2481ee8668e.

duplicated a change made in 6.6.5
49227bea27ebcd260f0c94a3055b14bbd8605c5e

Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: check if max number of bpf_loop iterations is tracked

commit 57e2a52deeb12ab84c15c6d0fb93638b5b94001b upstream.

Check that even if bpf_loop() callback simulation does not converge to
a specific state, verification could proceed via "brute force"
simulation of maximal number of callback calls.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-12-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: keep track of max number of bpf_loop callback iterations

commit bb124da69c47dd98d69361ec13244ece50bec63e upstream.

In some cases verifier can't infer convergence of the bpf_loop()
iteration. E.g. for the following program:

    static int cb(__u32 idx, struct num_context* ctx)
    {
        ctx->i++;
        return 0;
    }

    SEC("?raw_tp")
    int prog(void *_)
    {
        struct num_context ctx = { .i = 0 };
        __u8 choice_arr[2] = { 0, 1 };

        bpf_loop(2, cb, &ctx, 0);
        return choice_arr[ctx.i];
    }

Each 'cb' simulation would eventually return to 'prog' and reach
'return choice_arr[ctx.i]' statement. At which point ctx.i would be
marked precise, thus forcing verifier to track multitude of separate
states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry.

This commit allows "brute force" handling for such cases by limiting
number of callback body simulations using 'umax' value of the first
bpf_loop() parameter.

For this, extend bpf_func_state with 'callback_depth' field.
Increment this field when callback visiting state is pushed to states
traversal stack. For frame #N it's 'callback_depth' field counts how
many times callback with frame depth N+1 had been executed.
Use bpf_func_state specifically to allow independent tracking of
callback depths when multiple nested bpf_loop() calls are present.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: test widening for iterating callbacks

commit 9f3330aa644d6d979eb064c46e85c62d4b4eac75 upstream.

A test case to verify that imprecise scalars widening is applied to
callback entering state, when callback call is simulated repeatedly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: widening for callback iterators

commit cafe2c21508a38cdb3ed22708842e957b2572c3e upstream.

Callbacks are similar to open coded iterators, so add imprecise
widening logic for callback body processing. This makes callback based
loops behave identically to open coded iterators, e.g. allowing to
verify programs like below:

  struct ctx { u32 i; };
  int cb(u32 idx, struct ctx* ctx)
  {
          ++ctx->i;
          return 0;
  }
  ...
  struct ctx ctx = { .i = 0 };
  bpf_loop(100, cb, &ctx, 0);
  ...

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: tests for iterating callbacks

commit 958465e217dbf5fc6677d42d8827fb3073d86afd upstream.

A set of test cases to check behavior of callback handling logic,
check if verifier catches the following situations:
- program not safe on second callback iteration;
- program not safe on zero callback iterations;
- infinite loop inside a callback.

Verify that callback logic works for bpf_loop, bpf_for_each_map_elem,
bpf_user_ringbuf_drain, bpf_find_vma.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: verify callbacks as if they are called unknown number of times

commit ab5cfac139ab8576fb54630d4cca23c3e690ee90 upstream.

Prior to this patch callbacks were handled as regular function calls,
execution of callback body was modeled exactly once.
This patch updates callbacks handling logic as follows:
- introduces a function push_callback_call() that schedules callback
  body verification in env->head stack;
- updates prepare_func_exit() to reschedule callback body verification
  upon BPF_EXIT;
- as calls to bpf_*_iter_next(), calls to callback invoking functions
  are marked as checkpoints;
- is_state_visited() is updated to stop callback based iteration when
  some identical parent state is found.

Paths with callback function invoked zero times are now verified first,
which leads to necessity to modify some selftests:
- the following negative tests required adding release/unlock/drop
  calls to avoid previously masked unrelated error reports:
  - cb_refs.c:underflow_prog
  - exceptions_fail.c:reject_rbtree_add_throw
  - exceptions_fail.c:reject_with_cp_reference
- the following precision tracking selftests needed change in expected
  log trace:
  - verifier_subprog_precision.c:callback_result_precise
    (note: r0 precision is no longer propagated inside callback and
           I think this is a correct behavior)
  - verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback
  - verifier_subprog_precision.c:parent_stack_slot_precise_with_callback

Reported-by: Andrew Werner <awerner32@gmail.com>
Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: extract setup_func_entry() utility function

commit 58124a98cb8eda69d248d7f1de954c8b2767c945 upstream.

Move code for simulated stack frame creation to a separate utility
function. This function would be used in the follow-up change for
callbacks handling.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: extract __check_reg_arg() utility function

commit 683b96f9606ab7308ffb23c46ab43cecdef8a241 upstream.

Split check_reg_arg() into two utility functions:
- check_reg_arg() operating on registers from current verifier state;
- __check_reg_arg() operating on a specific set of registers passed as
a parameter;

The __check_reg_arg() function would be used by a follow-up change for
callbacks handling.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: track string payload offset as scalar in strobemeta

commit 87eb0152bcc102ecbda866978f4e54db5a3be1ef upstream.

This change prepares strobemeta for update in callbacks verification
logic. To allow bpf_loop() verification converge when multiple
callback iterations are considered:
- track offset inside strobemeta_payload->payload directly as scalar
  value;
- at each iteration make sure that remaining
  strobemeta_payload->payload capacity is sufficient for execution of
  read_{map,str}_var functions;
- make sure that offset is tracked as unbound scalar between
  iterations, otherwise verifier won't be able infer that bpf_loop
  callback reaches identical states.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: track tcp payload offset as scalar in xdp_synproxy

commit 977bc146d4eb7070118d8a974919b33bb52732b4 upstream.

This change prepares syncookie_{tc,xdp} for update in callbakcs
verification logic. To allow bpf_loop() verification converge when
multiple callback itreations are considered:
- track offset inside TCP payload explicitly, not as a part of the
  pointer;
- make sure that offset does not exceed MAX_PACKET_OFF enforced by
  verifier;
- make sure that offset is tracked as unbound scalar between
  iterations, otherwise verifier won't be able infer that bpf_loop
  callback reaches identical states.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: print full verifier states on infinite loop detection

commit b4d8239534fddc036abe4a0fdbf474d9894d4641 upstream.

Additional logging in is_state_visited(): if infinite loop is detected
print full verifier state for both current and equivalent states.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: test if state loops are detected in a tricky case

commit 64870feebecb7130291a55caf0ce839a87405a70 upstream.

A convoluted test case for iterators convergence logic that
demonstrates that states with branch count equal to 0 might still be
a part of not completely explored loop.

E.g. consider the following state diagram:

               initial     Here state 'succ' was processed first,
                 |         it was eventually tracked to produce a
                 V         state identical to 'hdr'.
    .---------> hdr        All branches from 'succ' had been explored
    |            |         and thus 'succ' has its .branches == 0.
    |            V
    |    .------...        Suppose states 'cur' and 'succ' correspond
    |    |       |         to the same instruction + callsites.
    |    V       V         In such case it is necessary to check
    |   ...     ...        whether 'succ' and 'cur' are identical.
    |    |       |         If 'succ' and 'cur' are a part of the same loop
    |    V       V         they have to be compared exactly.
    |   succ <- cur
    |    |
    |    V
    |   ...
    |    |
    '----'

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: correct loop detection for iterators convergence

commit 2a0992829ea3864939d917a5c7b48be6629c6217 upstream.

It turns out that .branches > 0 in is_state_visited() is not a
sufficient condition to identify if two verifier states form a loop
when iterators convergence is computed. This commit adds logic to
distinguish situations like below:

(I)            initial       (II)            initial
                  |                             |
                  V                             V
     .---------> hdr                           ..
     |            |                             |
     |            V                             V
     |    .------...                    .------..
     |    |       |                     |       |
     |    V       V                     V       V
     |   ...     ...               .-> hdr     ..
     |    |       |                |    |       |
     |    V       V                |    V       V
     |   succ <- cur               |   succ <- cur
     |    |                        |    |
     |    V                        |    V
     |   ...                       |   ...
     |    |                        |    |
     '----'                        '----'

For both (I) and (II) successor 'succ' of the current state 'cur' was
previously explored and has branches count at 0. However, loop entry
'hdr' corresponding to 'succ' might be a part of current DFS path.
If that is the case 'succ' and 'cur' are members of the same loop
and have to be compared exactly.

Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: tests with delayed read/precision makrs in loop body

commit 389ede06c2974b2f878a7ebff6b0f4f707f9db74 upstream.

These test cases try to hide read and precision marks from loop
convergence logic: marks would only be assigned on subsequent loop
iterations or after exploring states pushed to env->head stack first.
Without verifier fix to use exact states comparison logic for
iterators convergence these tests (except 'triple_continue') would be
errorneously marked as safe.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: exact states comparison for iterator convergence checks

commit 2793a8b015f7f1caadb9bce9c63dc659f7522676 upstream.

Convergence for open coded iterators is computed in is_state_visited()
by examining states with branches count > 1 and using states_equal().
states_equal() computes sub-state relation using read and precision marks.
Read and precision marks are propagated from children states,
thus are not guaranteed to be complete inside a loop when branches
count > 1. This could be demonstrated using the following unsafe program:

     1. r7 = -16
     2. r6 = bpf_get_prandom_u32()
     3. while (bpf_iter_num_next(&fp[-8])) {
     4.   if (r6 != 42) {
     5.     r7 = -32
     6.     r6 = bpf_get_prandom_u32()
     7.     continue
     8.   }
     9.   r0 = r10
    10.   r0 += r7
    11.   r8 = *(u64 *)(r0 + 0)
    12.   r6 = bpf_get_prandom_u32()
    13. }

Here verifier would first visit path 1-3, create a checkpoint at 3
with r7=-16, continue to 4-7,3 with r7=-32.

Because instructions at 9-12 had not been visitied yet existing
checkpoint at 3 does not have read or precision mark for r7.
Thus states_equal() would return true and verifier would discard
current state, thus unsafe memory access at 11 would not be caught.

This commit fixes this loophole by introducing exact state comparisons
for iterator convergence logic:
- registers are compared using regs_exact() regardless of read or
  precision marks;
- stack slots have to have identical type.

Unfortunately, this is too strict even for simple programs like below:

    i = 0;
    while(iter_next(&it))
      i++;

At each iteration step i++ would produce a new distinct state and
eventually instruction processing limit would be reached.

To avoid such behavior speculatively forget (widen) range for
imprecise scalar registers, if those registers were not precise at the
end of the previous iteration and do not match exactly.

This a conservative heuristic that allows to verify wide range of
programs, however it precludes verification of programs that conjure
an imprecise value on the first loop iteration and use it as precise
on the second.

Test case iter_task_vma_for_each() presents one of such cases:

        unsigned int seen = 0;
        ...
        bpf_for_each(task_vma, vma, task, 0) {
                if (seen >= 1000)
                        break;
                ...
                seen++;
        }

Here clang generates the following code:

<LBB0_4>:
      24:       r8 = r6                          ; stash current value of
                ... body ...                       'seen'
      29:       r1 = r10
      30:       r1 += -0x8
      31:       call bpf_iter_task_vma_next
      32:       r6 += 0x1                        ; seen++;
      33:       if r0 == 0x0 goto +0x2 <LBB0_6>  ; exit on next() == NULL
      34:       r7 += 0x10
      35:       if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000

<LBB0_6>:
      ... exit ...

Note that counter in r6 is copied to r8 and then incremented,
conditional jump is done using r8. Because of this precision mark for
r6 lags one state behind of precision mark on r8 and widening logic
kicks in.

Adding barrier_var(seen) after conditional is sufficient to force
clang use the same register for both counting and conditional jump.

This issue was discussed in the thread [1] which was started by
Andrew Werner <awerner32@gmail.com> demonstrating a similar bug
in callback functions handling. The callbacks would be addressed
in a followup patch.

[1] https://lore.kernel.org/bpf/97a90da09404c65c8e810cf83c94ac703705dc0e.camel@gmail.com/

Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: extract same_callsites() as utility function

commit 4c97259abc9bc8df7712f76f58ce385581876857 upstream.

Extract same_callsites() from clean_live_states() as a utility function.
This function would be used by the next patch in the set.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: move explored_state() closer to the beginning of verifier.c

commit 3c4e420cb6536026ddd50eaaff5f30e4f144200d upstream.

Subsequent patches would make use of explored_state() function.
Move it up to avoid adding unnecessary prototype.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: net: snps,dwmac: Tx coe unsupported

commit 6fb8c20a04be234cf1cfd4bdd8cfb8860c9d2d3b upstream.

Add dt-bindings for coe-unsupported property per tx queue. Some DWMAC
IPs support tx checksum offloading(coe) only for a few tx queues.

DW xGMAC IP can be synthesized such that it can support tx coe only
for a few initial tx queues. Also as Serge pointed out, for the DW
QoS IP tx coe can be individually configured for each tx queue. This
property is added to have sw fallback for checksum calculation if a
tx queue doesn't support tx coe.

Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: Add missing set_freezable() for freezable kthread

From: Kevin Hao <haokexin@gmail.com>

[ Upstream commit 8fb7b723924cc9306bc161f45496497aec733904 ]

The kernel thread function ksmbd_conn_handler_loop() invokes
the try_to_freeze() in its loop. But all the kernel threads are
non-freezable by default. So if we want to make a kernel thread to be
freezable, we have to invoke set_freezable() explicitly.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: send lease break notification on FILE_RENAME_INFORMATION

[ Upstream commit 3fc74c65b367476874da5fe6f633398674b78e5a ]

Send lease break notification on FILE_RENAME_INFORMATION request.
This patch fix smb2.lease.v2_epoch2 test failure.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: don't increment epoch if current state and request state are same

[ Upstream commit b6e9a44e99603fe10e1d78901fdd97681a539612 ]

If existing lease state and request state are same, don't increment
epoch in create context.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix potential circular locking issue in smb2_set_ea()

[ Upstream commit 6fc0a265e1b932e5e97a038f99e29400a93baad0 ]

smb2_set_ea() can be called in parent inode lock range.
So add get_write argument to smb2_set_ea() not to call nested
mnt_want_write().

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: set v2 lease version on lease upgrade

[ Upstream commit bb05367a66a9990d2c561282f5620bb1dbe40c28 ]

If file opened with v2 lease is upgraded with v1 lease, smb server
should response v2 lease create context to client.
This patch fix smb2.lease.v2_epoch2 test failure.

This test case assumes the following scenario:
1. smb2 create with v2 lease(R, LEASE1 key)
2. smb server return smb2 create response with v2 lease context(R,
LEASE1 key, epoch + 1)
3. smb2 create with v1 lease(RH, LEASE1 key)
4. smb server return smb2 create response with v2 lease context(RH,
LEASE1 key, epoch + 2)

i.e. If same client(same lease key) try to open a file that is being
opened with v2 lease with v1 lease, smb server should return v2 lease.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: Do not hold the port lock when setting rx-during-tx GPIO

commit 07c30ea5861fb26a77dade8cdc787252f6122fb1 upstream.

Both the imx and stm32 driver set the rx-during-tx GPIO in rs485_config().
Since this function is called with the port lock held, this can be a
problem in case that setting the GPIO line can sleep (e.g. if a GPIO
expander is used which is connected via SPI or I2C).

Avoid this issue by moving the GPIO setting outside of the port lock into
the serial core and thus making it a generic feature.

Also with commit c54d48543689 ("serial: stm32: Add support for rs485
RX_DURING_TX output GPIO") the SER_RS485_RX_DURING_TX flag is only set if a
rx-during-tx GPIO is _not_ available, which is wrong. Fix this, too.

Furthermore reset old GPIO settings in case that changing the RS485
configuration failed.

Fixes: c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO")
Fixes: ca530cfa968c ("serial: imx: Add support for RS485 RX_DURING_TX output GPIO")
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-2-l.sanfilippo@kunbus.com
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: page_alloc: unreserve highatomic page blocks before oom

commit ac3f3b0a55518056bc80ed32a41931c99e1f7d81 upstream.

__alloc_pages_direct_reclaim() is called from slowpath allocation where
high atomic reserves can be unreserved after there is a progress in
reclaim and yet no suitable page is found.  Later should_reclaim_retry()
gets called from slow path allocation to decide if the reclaim needs to be
retried before OOM kill path is taken.

should_reclaim_retry() checks the available(reclaimable + free pages)
memory against the min wmark levels of a zone and returns:

a) true, if it is above the min wmark so that slow path allocation will
   do the reclaim retries.

b) false, thus slowpath allocation takes oom kill path.

should_reclaim_retry() can also unreserves the high atomic reserves **but
only after all the reclaim retries are exhausted.**

In a case where there are almost none reclaimable memory and free pages
contains mostly the high atomic reserves but allocation context can't use
these high atomic reserves, makes the available memory below min wmark
levels hence false is returned from should_reclaim_retry() leading the
allocation request to take OOM kill path.  This can turn into a early oom
kill if high atomic reserves are holding lot of free memory and
unreserving of them is not attempted.

(early)OOM is encountered on a VM with the below state:
[  295.998653] Normal free:7728kB boost:0kB min:804kB low:1004kB
high:1204kB reserved_highatomic:8192KB active_anon:4kB inactive_anon:0kB
active_file:24kB inactive_file:24kB unevictable:1220kB writepending:0kB
present:70732kB managed:49224kB mlocked:0kB bounce:0kB free_pcp:688kB
local_pcp:492kB free_cma:0kB
[  295.998656] lowmem_reserve[]: 0 32
[  295.998659] Normal: 508*4kB (UMEH) 241*8kB (UMEH) 143*16kB (UMEH)
33*32kB (UH) 7*64kB (UH) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB
0*4096kB = 7752kB

Per above log, the free memory of ~7MB exist in the high atomic reserves
is not freed up before falling back to oom kill path.

Fix it by trying to unreserve the high atomic reserves in
should_reclaim_retry() before __alloc_pages_direct_reclaim() can fallback
to oom kill path.

Link: https://lkml.kernel.org/r/1700823445-27531-1-git-send-email-quic_charante@quicinc.com
Fixes: 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Chris Goldsworthy <quic_cgoldswo@quicinc.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chris Goldsworthy <quic_cgoldswo@quicinc.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch/smp: Call rcutree_report_cpu_starting() earlier

commit a2ccf46333d7b2cf9658f0d82ac74097c1542fae upstream.

rcutree_report_cpu_starting() must be called before cpu_probe() to avoid
the following lockdep splat that triggered by calling __alloc_pages() when
CONFIG_PROVE_RCU_LIST=y:

=============================
WARNING: suspicious RCU usage
6.6.0+ #980 Not tainted
-----------------------------
kernel/locking/lockdep.c:3761 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by swapper/1/0:
  #0: 900000000c82ef98 (&pcp->lock){+.+.}-{2:2}, at: get_page_from_freelist+0x894/0x1790
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.0+ #980
Stack : 0000000000000001 9000000004f79508 9000000004893670 9000000100310000
         90000001003137d0 0000000000000000 90000001003137d8 9000000004f79508
         0000000000000000 0000000000000001 0000000000000000 90000000048a3384
         203a656d616e2065 ca43677b3687e616 90000001002c3480 0000000000000008
         000000000000009d 0000000000000000 0000000000000001 80000000ffffe0b8
         000000000000000d 0000000000000033 0000000007ec0000 13bbf50562dad831
         9000000005140748 0000000000000000 9000000004f79508 0000000000000004
         0000000000000000 9000000005140748 90000001002bad40 0000000000000000
         90000001002ba400 0000000000000000 9000000003573ec8 0000000000000000
         00000000000000b0 0000000000000004 0000000000000000 0000000000070000
         ...
Call Trace:
[<9000000003573ec8>] show_stack+0x38/0x150
[<9000000004893670>] dump_stack_lvl+0x74/0xa8
[<900000000360d2bc>] lockdep_rcu_suspicious+0x14c/0x190
[<900000000361235c>] __lock_acquire+0xd0c/0x2740
[<90000000036146f4>] lock_acquire+0x104/0x2c0
[<90000000048a955c>] _raw_spin_lock_irqsave+0x5c/0x90
[<900000000381cd5c>] rmqueue_bulk+0x6c/0x950
[<900000000381fc0c>] get_page_from_freelist+0xd4c/0x1790
[<9000000003821c6c>] __alloc_pages+0x1bc/0x3e0
[<9000000003583b40>] tlb_init+0x150/0x2a0
[<90000000035742a0>] per_cpu_trap_init+0xf0/0x110
[<90000000035712fc>] cpu_probe+0x3dc/0x7a0
[<900000000357ed20>] start_secondary+0x40/0xb0
[<9000000004897138>] smpboot_entry+0x54/0x58

raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.

See also commit 29368e093921 ("x86/smpboot: Move rcu_cpu_starting() earlier"),
commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier").

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()

commit d5078509c8b06c5c472a60232815e41af81c6446 upstream.

Simplify and improve readability by replacing while(1) loop with
do {} while, and by using the keep_polling variable as the exit
condition, making it more explicit.

Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall")
Cc: <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()

commit ed647256e8f226241ecff7baaecdb8632ffc7ec1 upstream.

Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed
sc16is7xx_port_irq() from looping multiple times when there was still
interrupts to serve. It simply changed the do {} while(1) loop to a
do {} while(0) loop, which makes the loop itself now obsolete.

Clean the code by removing this obsolete do {} while(0) loop.

Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall")
Cc: <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error

commit 8a1060ce974919f2a79807527ad82ac39336eda2 upstream.

If an error occurs during probing, the sc16is7xx_lines bitfield may be left
in a state that doesn't represent the correct state of lines allocation.

For example, in a system with two SC16 devices, if an error occurs only
during probing of channel (port) B of the second device, sc16is7xx_lines
final state will be 00001011b instead of the expected 00000011b.

This is caused in part because of the "i--" in the for/loop located in
the out_ports: error path.

Fix this by checking the return value of uart_add_one_port() and set line
allocation bit only if this was successful. This allows the refactor of
the obfuscated for(i--...) loop in the error path, and properly call
uart_remove_one_port() only when needed, and properly unset line allocation
bits.

Also use same mechanism in remove() when calling uart_remove_one_port().

Fixes: c64349722d14 ("sc16is7xx: support multiple devices")
Cc: <stable@vger.kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO

commit dbf4ab821804df071c8b566d9813083125e6d97b upstream.

The SC16IS7XX IC supports a burst mode to access the FIFOs where the
initial register address is sent ($00), followed by all the FIFO data
without having to resend the register address each time. In this mode, the
IC doesn't increment the register address for each R/W byte.

The regmap_raw_read() and regmap_raw_write() are functions which can
perform IO over multiple registers. They are currently used to read/write
from/to the FIFO, and although they operate correctly in this burst mode on
the SPI bus, they would corrupt the regmap cache if it was not disabled
manually. The reason is that when the R/W size is more than 1 byte, these
functions assume that the register address is incremented and handle the
cache accordingly.

Convert FIFO R/W functions to use the regmap _noinc_ versions in order to
remove the manual cache control which was a workaround when using the
_raw_ versions. FIFO registers are properly declared as volatile so
cache will not be used/updated for FIFO accesses.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: change EFR lock to operate on each channels

commit 4409df5866b7ff7686ba27e449ca97a92ee063c9 upstream.

Now that the driver has been converted to use one regmap per port, change
efr locking to operate on a channel basis instead of on the whole IC.

Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc: <stable@vger.kernel.org> # 6.1.x: 3837a03 serial: sc16is7xx: improve regmap debugfs by using one regmap per port
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: remove unused line structure member

commit 41a308cbedb2a68a6831f0f2e992e296c4b8aff0 upstream.

Now that the driver has been converted to use one regmap per port, the line
structure member is no longer used, so remove it.

Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: remove global regmap from struct sc16is7xx_port

commit f6959c5217bd799bcb770b95d3c09b3244e175c6 upstream.

Remove global struct regmap so that it is more obvious that this
regmap is to be used only in the probe function.

Also add a comment to that effect in probe function.

Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc: <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: remove wasteful static buffer in sc16is7xx_regmap_name()

commit 6bcab3c8acc88e265c570dea969fd04f137c8a4c upstream.

Using a static buffer inside sc16is7xx_regmap_name() was a convenient and
simple way to set the regmap name without having to allocate and free a
buffer each time it is called. The drawback is that the static buffer
wastes memory for nothing once regmap is fully initialized.

Remove static buffer and use constant strings instead.

This also avoids a truncation warning when using "%d" or "%u" in snprintf
which was flagged by kernel test robot.

Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc: <stable@vger.kernel.org> # 6.1.x: 3837a03 serial: sc16is7xx: improve regmap debugfs by using one regmap per port
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sc16is7xx: improve regmap debugfs by using one regmap per port

commit 3837a0379533aabb9e4483677077479f7c6aa910 upstream.

With this current driver regmap implementation, it is hard to make sense
of the register addresses displayed using the regmap debugfs interface,
because they do not correspond to the actual register addresses documented
in the datasheet. For example, register 1 is displayed as registers 04 thru
07:

$ cat /sys/kernel/debug/regmap/spi0.0/registers
  04: 10 -> Port 0, register offset 1
  05: 10 -> Port 1, register offset 1
  06: 00 -> Port 2, register offset 1 -> invalid
  07: 00 -> port 3, register offset 1 -> invalid
  ...

The reason is that bits 0 and 1 of the register address correspond to the
channel (port) bits, so the register address itself starts at bit 2, and we
must 'mentally' shift each register address by 2 bits to get its real
address/offset.

Also, only channels 0 and 1 are supported by the chip, so channel mask
combinations of 10b and 11b are invalid, and the display of these
registers is useless.

This patch adds a separate regmap configuration for each port, similar to
what is done in the max310x driver, so that register addresses displayed
match the register addresses in the chip datasheet. Also, each port now has
its own debugfs entry.

Example with new regmap implementation:

$ cat /sys/kernel/debug/regmap/spi0.0-port0/registers
1: 10
2: 01
3: 00
...

$ cat /sys/kernel/debug/regmap/spi0.0-port1/registers
1: 10
2: 01
3: 00

As an added bonus, this also simplifies some operations (read/write/modify)
because it is no longer necessary to manually shift register addresses.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231030211447.974779-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rename(): fix the locking of subdirectories

commit 22e111ed6c83dcde3037fc81176012721bc34c0b upstream.

We should never lock two subdirectories without having taken
->s_vfs_rename_mutex; inode pointer order or not, the "order" proposed
in 28eceeda130f "fs: Lock moved directories" is not transitive, with
the usual consequences.

The rationale for locking renamed subdirectory in all cases was
the possibility of race between rename modifying .. in a subdirectory to
reflect the new parent and another thread modifying the same subdirectory.
For a lot of filesystems that's not a problem, but for some it can lead
to trouble (e.g. the case when short directory contents is kept in the
inode, but creating a file in it might push it across the size limit
and copy its contents into separate data block(s)).

However, we need that only in case when the parent does change -
otherwise ->rename() doesn't need to do anything with .. entry in the
first place. Some instances are lazy and do a tautological update anyway,
but it's really not hard to avoid.

Amended locking rules for rename():
find the parent(s) of source and target
if source and target have the same parent
lock the common parent
else
lock ->s_vfs_rename_mutex
lock both parents, in ancestor-first order; if neither
is an ancestor of another, lock the parent of source
first.
find the source and target.
if source and target have the same parent
if operation is an overwriting rename of a subdirectory
lock the target subdirectory
else
if source is a subdirectory
lock the source
if target is a subdirectory
lock the target
lock non-directories involved, in inode pointer order if both
source and target are such.

That way we are guaranteed that parents are locked (for obvious reasons),
that any renamed non-directory is locked (nfsd relies upon that),
that any victim is locked (emptiness check needs that, among other things)
and subdirectory that changes parent is locked (needed to protect the update
of .. entries). We are also guaranteed that any operation locking more
than one directory either takes ->s_vfs_rename_mutex or locks a parent
followed by its child.

Cc: stable@vger.kernel.org
Fixes: 28eceeda130f "fs: Lock moved directories"
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/sparsemem: fix race in accessing memory_section->usage

commit 5ec8e8ea8b7783fab150cf86404fc38cb4db8800 upstream.

The below race is observed on a PFN which falls into the device memory
region with the system memory configuration where PFN's are such that
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL].  Since normal zone start and end
pfn contains the device memory PFN's as well, the compaction triggered
will try on the device memory PFN's too though they end up in NOP(because
pfn_to_online_page() returns NULL for ZONE_DEVICE memory sections).  When
from other core, the section mappings are being removed for the
ZONE_DEVICE region, that the PFN in question belongs to, on which
compaction is currently being operated is resulting into the kernel crash
with CONFIG_SPASEMEM_VMEMAP enabled.  The crash logs can be seen at [1].

compact_zone() memunmap_pages
------------- ---------------
__pageblock_pfn_to_page
   ......
(a)pfn_valid():
     valid_section()//return true
      (b)__remove_pages()->
  sparse_remove_section()->
    section_deactivate():
    [Free the array ms->usage and set
     ms->usage = NULL]
     pfn_section_valid()
     [Access ms->usage which
     is NULL]

NOTE: From the above it can be said that the race is reduced to between
the pfn_valid()/pfn_section_valid() and the section deactivate with
SPASEMEM_VMEMAP enabled.

The commit b943f045a9af("mm/sparse: fix kernel crash with
pfn_section_valid check") tried to address the same problem by clearing
the SECTION_HAS_MEM_MAP with the expectation of valid_section() returns
false thus ms->usage is not accessed.

Fix this issue by the below steps:

a) Clear SECTION_HAS_MEM_MAP before freeing the ->usage.

b) RCU protected read side critical section will either return NULL
   when SECTION_HAS_MEM_MAP is cleared or can successfully access ->usage.

c) Free the ->usage with kfree_rcu() and set ms->usage = NULL.  No
   attempt will be made to access ->usage after this as the
   SECTION_HAS_MEM_MAP is cleared thus valid_section() return false.

Thanks to David/Pavan for their inputs on this patch.

[1] https://lore.kernel.org/linux-mm/994410bb-89aa-d987-1f50-f514903c55aa@quicinc.com/

On Snapdragon SoC, with the mentioned memory configuration of PFN's as
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL], we are able to see bunch of
issues daily while testing on a device farm.

For this particular issue below is the log.  Though the below log is
not directly pointing to the pfn_section_valid(){ ms->usage;}, when we
loaded this dump on T32 lauterbach tool, it is pointing.

[  540.578056] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[  540.578068] Mem abort info:
[  540.578070]   ESR = 0x0000000096000005
[  540.578073]   EC = 0x25: DABT (current EL), IL = 32 bits
[  540.578077]   SET = 0, FnV = 0
[  540.578080]   EA = 0, S1PTW = 0
[  540.578082]   FSC = 0x05: level 1 translation fault
[  540.578085] Data abort info:
[  540.578086]   ISV = 0, ISS = 0x00000005
[  540.578088]   CM = 0, WnR = 0
[  540.579431] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBSBTYPE=--)
[  540.579436] pc : __pageblock_pfn_to_page+0x6c/0x14c
[  540.579454] lr : compact_zone+0x994/0x1058
[  540.579460] sp : ffffffc03579b510
[  540.579463] x29: ffffffc03579b510 x28: 0000000000235800 x27:000000000000000c
[  540.579470] x26: 0000000000235c00 x25: 0000000000000068 x24:ffffffc03579b640
[  540.579477] x23: 0000000000000001 x22: ffffffc03579b660 x21:0000000000000000
[  540.579483] x20: 0000000000235bff x19: ffffffdebf7e3940 x18:ffffffdebf66d140
[  540.579489] x17: 00000000739ba063 x16: 00000000739ba063 x15:00000000009f4bff
[  540.579495] x14: 0000008000000000 x13: 0000000000000000 x12:0000000000000001
[  540.579501] x11: 0000000000000000 x10: 0000000000000000 x9 :ffffff897d2cd440
[  540.579507] x8 : 0000000000000000 x7 : 0000000000000000 x6 :ffffffc03579b5b4
[  540.579512] x5 : 0000000000027f25 x4 : ffffffc03579b5b8 x3 :0000000000000001
[  540.579518] x2 : ffffffdebf7e3940 x1 : 0000000000235c00 x0 :0000000000235800
[  540.579524] Call trace:
[  540.579527]  __pageblock_pfn_to_page+0x6c/0x14c
[  540.579533]  compact_zone+0x994/0x1058
[  540.579536]  try_to_compact_pages+0x128/0x378
[  540.579540]  __alloc_pages_direct_compact+0x80/0x2b0
[  540.579544]  __alloc_pages_slowpath+0x5c0/0xe10
[  540.579547]  __alloc_pages+0x250/0x2d0
[  540.579550]  __iommu_dma_alloc_noncontiguous+0x13c/0x3fc
[  540.579561]  iommu_dma_alloc+0xa0/0x320
[  540.579565]  dma_alloc_attrs+0xd4/0x108

[quic_charante@quicinc.com: use kfree_rcu() in place of synchronize_rcu(), per David]
Link: https://lkml.kernel.org/r/1698403778-20938-1-git-send-email-quic_charante@quicinc.com
Link: https://lkml.kernel.org/r/1697202267-23600-1-git-send-email-quic_charante@quicinc.com
Fixes: f46edbd1b151 ("mm/sparsemem: add helpers track active portions of a section at boot")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/rmap: fix misplaced parenthesis of a likely()

commit f67f8d4a8c1e1ebc85a6cbdb9a7266f14863461c upstream.

Running my yearly branch profiler to see where likely/unlikely annotation
may be added or removed, I discovered this:

correct incorrect  %        Function                  File              Line
------- ---------  -        --------                  ----              ----
       0   457918 100 page_try_dup_anon_rmap         rmap.h               264
[..]
  458021        0   0 page_try_dup_anon_rmap         rmap.h               265

I thought it was interesting that line 264 of rmap.h had a 100% incorrect
annotation, but the line directly below it was 100% correct. Looking at the
code:

if (likely(!is_device_private_page(page) &&
    unlikely(page_needs_cow_for_dma(vma, page))))

It didn't make sense. The "likely()" was around the entire if statement
(not just the "!is_device_private_page(page)"), which also included the
"unlikely()" portion of that if condition.

If the unlikely portion is unlikely to be true, that would make the entire
if condition unlikely to be true, so it made no sense at all to say the
entire if condition is true.

What is more likely to be likely is just the first part of the if statement
before the && operation. It's likely to be a misplaced parenthesis. And
after making the if condition broken into a likely() && unlikely(), both
now appear to be correct!

Link: https://lkml.kernel.org/r/20231201145936.5ddfdb50@gandalf.local.home
Fixes:fb3d824d1a46c ("mm/rmap: split page_dup_rmap() into page_dup_file_rmap() and page_try_dup_anon_rmap()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mm: hugepage-vmemmap fails on 64K page size systems

commit 00bcfcd47a52f50f07a2e88d730d7931384cb073 upstream.

The kernel sefltest mm/hugepage-vmemmap fails on architectures which has
different page size other than 4K. In hugepage-vmemmap page size used is
4k so the pfn calculation will go wrong on systems which has different
page size .The length of MAP_HUGETLB memory must be hugepage aligned but
in hugepage-vmemmap map length is 2M so this will not get aligned if the
system has differnet hugepage size.

Added psize() to get the page size and default_huge_page_size() to
get the default hugepage size at run time, hugepage-vmemmap test pass
on powerpc with 64K page size and x86 with 4K page size.

Result on powerpc without patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 0
Head page flags (100000000) is invalid
check_page_flags: Invalid argument
*#

Result on powerpc with patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 600
*#

Result on x86 with patch (page size 4K)
*# ./hugepage-vmemmap
Returned address is 0x7fc7c2c00000 whose pfn is 1dac00
*#

Link: https://lkml.kernel.org/r/3b3a3ae37ba21218481c482a872bbf7526031600.1704865754.git.donettom@linux.vnet.ibm.com
Fixes: b147c89cd429 ("selftests: vm: add a hugetlb test case")
Signed-off-by: Donet Tom <donettom@linux.vnet.ibm.com>
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Tested-by: Geetika Moolchandani <geetika@linux.ibm.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kexec: do syscore_shutdown() in kernel_kexec

commit 7bb943806ff61e83ae4cceef8906b7fe52453e8a upstream.

syscore_shutdown() runs driver and module callbacks to get the system into
a state where it can be correctly shut down.  In commit 6f389a8f1dd2 ("PM
/ reboot: call syscore_shutdown() after disable_nonboot_cpus()")
syscore_shutdown() was removed from kernel_restart_prepare() and hence got
(incorrectly?) removed from the kexec flow.  This was innocuous until
commit 6735150b6997 ("KVM: Use syscore_ops instead of reboot_notifier to
hook restart/shutdown") changed the way that KVM registered its shutdown
callbacks, switching from reboot notifiers to syscore_ops.shutdown.  As
syscore_shutdown() is missing from kexec, KVM's shutdown hook is not run
and virtualisation is left enabled on the boot CPU which results in triple
faults when switching to the new kernel on Intel x86 VT-x with VMXE
enabled.

Fix this by adding syscore_shutdown() to the kexec sequence.  In terms of
where to add it, it is being added after migrating the kexec task to the
boot CPU, but before APs are shut down.  It is not totally clear if this
is the best place: in commit 6f389a8f1dd2 ("PM / reboot: call
syscore_shutdown() after disable_nonboot_cpus()") it is stated that
"syscore_ops operations should be carried with one CPU on-line and
interrupts disabled." APs are only offlined later in machine_shutdown(),
so this syscore_shutdown() is being run while APs are still online.  This
seems to be the correct place as it matches where syscore_shutdown() is
run in the reboot and halt flows - they also run it before APs are shut
down.  The assumption is that the commit message in commit 6f389a8f1dd2
("PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()") is
no longer valid.

KVM has been discussed here as it is what broke loudly by not having
syscore_shutdown() in kexec, but this change impacts more than just KVM;
all drivers/modules which register a syscore_ops.shutdown callback will
now be invoked in the kexec flow.  Looking at some of them like x86 MCE it
is probably more correct to also shut these down during kexec.
Maintainers of all drivers which use syscore_ops.shutdown are added on CC
for visibility.  They are:

arch/powerpc/platforms/cell/spu_base.c  .shutdown = spu_shutdown,
arch/x86/kernel/cpu/mce/core.c         .shutdown = mce_syscore_shutdown,
arch/x86/kernel/i8259.c                 .shutdown = i8259A_shutdown,
drivers/irqchip/irq-i8259.c         .shutdown = i8259A_shutdown,
drivers/irqchip/irq-sun6i-r.c         .shutdown = sun6i_r_intc_shutdown,
drivers/leds/trigger/ledtrig-cpu.c .shutdown = ledtrig_cpu_syscore_shutdown,
drivers/power/reset/sc27xx-poweroff.c .shutdown = sc27xx_poweroff_shutdown,
kernel/irq/generic-chip.c         .shutdown = irq_gc_shutdown,
virt/kvm/kvm_main.c                 .shutdown = kvm_shutdown,

This has been tested by doing a kexec on x86_64 and aarch64.

Link: https://lkml.kernel.org/r/20231213064004.2419447-1-jgowans@amazon.com
Fixes: 6735150b6997 ("KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown")
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Alexander Graf <graf@amazon.de>
Cc: Jan H. Schoenherr <jschoenh@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path

commit 1e022216dcd248326a5bb95609d12a6815bca4e2 upstream.

For error handling path in ubifs_symlink(), inode will be marked as
bad first, then iput() is invoked. If inode->i_link is initialized by
fscrypt_encrypt_symlink() in encryption scenario, inode->i_link won't
be freed by callchain ubifs_free_inode -> fscrypt_free_inode in error
handling path, because make_bad_inode() has changed 'inode->i_mode' as
'S_IFREG'.
Following kmemleak is easy to be reproduced by injecting error in
ubifs_jnl_update() when doing symlink in encryption scenario:
unreferenced object 0xffff888103da3d98 (size 8):
  comm "ln", pid 1692, jiffies 4294914701 (age 12.045s)
  backtrace:
   kmemdup+0x32/0x70
   __fscrypt_encrypt_symlink+0xed/0x1c0
   ubifs_symlink+0x210/0x300 [ubifs]
   vfs_symlink+0x216/0x360
   do_symlinkat+0x11a/0x190
   do_syscall_64+0x3b/0xe0
There are two ways fixing it:
1. Remove make_bad_inode() in error handling path. We can do that
    because ubifs_evict_inode() will do same processes for good
    symlink inode and bad symlink inode, for inode->i_nlink checking
    is before is_bad_inode().
2. Free inode->i_link before marking inode bad.
Method 2 is picked, it has less influence, personally, I think.

Cc: stable@vger.kernel.org
Fixes: 2c58d548f570 ("fscrypt: cache decrypted symlink target in ->i_link")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: disable mirror feature during crashkernel

commit 7ea6ec4c25294e8bc8788148ef854df92ee8dc5e upstream.

If the system has no mirrored memory or uses crashkernel.high while
kernelcore=mirror is enabled on the command line then during crashkernel,
there will be limited mirrored memory and this usually leads to OOM.

To solve this problem, disable the mirror feature during crashkernel.

Link: https://lkml.kernel.org/r/20240109041536.3903042-1-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nouveau/vmm: don't set addr on the fail path to avoid warning

commit cacea81390fd8c8c85404e5eb2adeb83d87a912e upstream.

nvif_vmm_put gets called if addr is set, but if the allocation
fails we don't need to call put, otherwise we get a warning like

[523232.435671] ------------[ cut here ]------------
[523232.435674] WARNING: CPU: 8 PID: 1505697 at drivers/gpu/drm/nouveau/nvif/vmm.c:68 nvif_vmm_put+0x72/0x80 [nouveau]
[523232.435795] Modules linked in: uinput rfcomm snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr bnep sunrpc binfmt_misc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common iwlmvm nfit libnvdimm vfat fat x86_pkg_temp_thermal intel_powerclamp mac80211 snd_soc_avs snd_soc_hda_codec coretemp snd_hda_ext_core snd_soc_core snd_hda_codec_realtek kvm_intel snd_hda_codec_hdmi snd_compress snd_hda_codec_generic ac97_bus snd_pcm_dmaengine snd_hda_intel libarc4 snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm iwlwifi snd_hda_core btusb snd_hwdep btrtl snd_seq btintel irqbypass btbcm rapl snd_seq_device eeepc_wmi btmtk intel_cstate iTCO_wdt cfg80211 snd_pcm asus_wmi bluetooth intel_pmc_bxt iTCO_vendor_support snd_timer ledtrig_audio pktcdvd snd mei_me
[523232.435828]  sparse_keymap intel_uncore i2c_i801 platform_profile wmi_bmof mei pcspkr ioatdma soundcore i2c_smbus rfkill idma64 dca joydev acpi_tad loop zram nouveau drm_ttm_helper ttm video drm_exec drm_gpuvm gpu_sched crct10dif_pclmul i2c_algo_bit nvme crc32_pclmul crc32c_intel drm_display_helper polyval_clmulni nvme_core polyval_generic e1000e mxm_wmi cec ghash_clmulni_intel r8169 sha512_ssse3 nvme_common wmi pinctrl_sunrisepoint uas usb_storage ip6_tables ip_tables fuse
[523232.435849] CPU: 8 PID: 1505697 Comm: gnome-shell Tainted: G        W          6.6.0-rc7-nvk-uapi+ #12
[523232.435851] Hardware name: System manufacturer System Product Name/ROG STRIX X299-E GAMING II, BIOS 1301 09/24/2021
[523232.435852] RIP: 0010:nvif_vmm_put+0x72/0x80 [nouveau]
[523232.435934] Code: 00 00 48 89 e2 be 02 00 00 00 48 c7 04 24 00 00 00 00 48 89 44 24 08 e8 fc bf ff ff 85
c0 75 0a 48 c7 43 08 00 00 00 00 eb b3 <0f> 0b eb f2 e8 f5 c9 b2 e6 0f 1f 44 00 00 90 90 90 90 90 90 90 90
[523232.435936] RSP: 0018:ffffc900077ffbd8 EFLAGS: 00010282
[523232.435937] RAX: 00000000fffffffe RBX: ffffc900077ffc00 RCX: 0000000000000010
[523232.435938] RDX: 0000000000000010 RSI: ffffc900077ffb38 RDI: ffffc900077ffbd8
[523232.435940] RBP: ffff888e1c4f2140 R08: 0000000000000000 R09: 0000000000000000
[523232.435940] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888503811800
[523232.435941] R13: ffffc900077ffca0 R14: ffff888e1c4f2140 R15: ffff88810317e1e0
[523232.435942] FS:  00007f933a769640(0000) GS:ffff88905fa00000(0000) knlGS:0000000000000000
[523232.435943] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[523232.435944] CR2: 00007f930bef7000 CR3: 00000005d0322001 CR4: 00000000003706e0
[523232.435945] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[523232.435946] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[523232.435964] Call Trace:
[523232.435965]  <TASK>
[523232.435966]  ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436051]  ? __warn+0x81/0x130
[523232.436055]  ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436138]  ? report_bug+0x171/0x1a0
[523232.436142]  ? handle_bug+0x3c/0x80
[523232.436144]  ? exc_invalid_op+0x17/0x70
[523232.436145]  ? asm_exc_invalid_op+0x1a/0x20
[523232.436149]  ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436230]  ? nvif_vmm_put+0x64/0x80 [nouveau]
[523232.436342]  nouveau_vma_del+0x80/0xd0 [nouveau]
[523232.436506]  nouveau_vma_new+0x1a0/0x210 [nouveau]
[523232.436671]  nouveau_gem_object_open+0x1d0/0x1f0 [nouveau]
[523232.436835]  drm_gem_handle_create_tail+0xd1/0x180
[523232.436840]  drm_prime_fd_to_handle_ioctl+0x12e/0x200
[523232.436844]  ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10
[523232.436847]  drm_ioctl_kernel+0xd3/0x180
[523232.436849]  drm_ioctl+0x26d/0x4b0
[523232.436851]  ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10
[523232.436855]  nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
[523232.437032]  __x64_sys_ioctl+0x94/0xd0
[523232.437036]  do_syscall_64+0x5d/0x90
[523232.437040]  ? syscall_exit_to_user_mode+0x2b/0x40
[523232.437044]  ? do_syscall_64+0x6c/0x90
[523232.437046]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Reported-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117213852.295565-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: Extend timeout for waiting for UIP to clear to 1s

commit cef9ecc8e938dd48a560f7dd9be1246359248d20 upstream.

Specs don't say anything about UIP being cleared within 10ms. They
only say that UIP won't occur for another 244uS. If a long NMI occurs
while UIP is still updating it might not be possible to get valid
data in 10ms.

This has been observed in the wild that around s2idle some calls can
take up to 480ms before UIP is clear.

Adjust callers from outside an interrupt context to wait for up to a
1s instead of 10ms.

Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: Add support for configuring the UIP timeout for RTC reads

commit 120931db07b49252aba2073096b595482d71857c upstream.

The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().

If UIP timeout is configured by caller to be >=100 ms and a call
takes this long, log a warning.

Make all callers use 10ms to ensure no functional changes.

Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: mc146818-lib: Adjust failure return code for mc146818_get_time()

commit af838635a3eb9b1bc0d98599c101ebca98f31311 upstream.

mc146818_get_time() calls mc146818_avoid_UIP() to avoid fetching the
time while RTC update is in progress (UIP). When this fails, the return
code is -EIO, but actually there was no IO failure.

The reason for the return from mc146818_avoid_UIP() is that the UIP
wasn't cleared in the time period. Adjust the return code to -ETIMEDOUT
to match the behavior.

Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: <stable@vger.kernel.org>
Fixes: 2a61b0ac5493 ("rtc: mc146818-lib: refactor mc146818_get_time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: Adjust failure return code for cmos_set_alarm()

commit 1311a8f0d4b23f58bbababa13623aa40b8ad4e0c upstream.

When mc146818_avoid_UIP() fails to return a valid value, this is because
UIP didn't clear in the timeout period. Adjust the return code in this
case to -ETIMEDOUT.

Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: <stable@vger.kernel.org>
Fixes: cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time")
Fixes: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-3-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: cmos: Use ACPI alarm for non-Intel x86 systems too

commit 3d762e21d56370a43478b55e604b4a83dd85aafc upstream.

Intel systems > 2015 have been configured to use ACPI alarm instead
of HPET to avoid s2idle issues.

Having HPET programmed for wakeup causes problems on AMD systems with
s2idle as well.

One particular case is that the systemd "SuspendThenHibernate" feature
doesn't work properly on the Framework 13" AMD model. Switching to
using ACPI alarm fixes the issue.

Adjust the quirk to apply to AMD/Hygon systems from 2021 onwards.
This matches what has been tested and is specifically to avoid potential
risk to older systems.

Cc: <stable@vger.kernel.org> # 6.1+
Reported-by: <alvin.zhuge@gmail.com>
Reported-by: <renzhamin@gmail.com>
Closes: https://github.com/systemd/systemd/issues/24279
Reported-by: Kelvie Wong <kelvie@kelvie.ca>
Closes: https://community.frame.work/t/systemd-suspend-then-hibernate-wakes-up-after-5-minutes/39392
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231106162310.85711-1-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD

commit 832dd634bd1b4e3bbe9f10b9c9ba5db6f6f2b97f upstream.

Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.

The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:

* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en

In both cases the workaround is described as:

| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.

The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".

Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:

| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]

This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.

The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:

| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret

The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:

| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.

... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".

Fixes: 471470bc7052 ("arm64: errata: Add Cortex-A520 speculative unprivileged load workaround")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240116110221.420467-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/sme: Always exit sme_alloc() early with existing storage

commit dc7eb8755797ed41a0d1b5c0c39df3c8f401b3d9 upstream.

When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.

Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.

Fixes: 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Add Cortex-A510 speculative unprivileged load workaround

commit f827bcdafa2a2ac21c91e47f587e8d0c76195409 upstream.

Implement the workaround for ARM Cortex-A510 erratum 3117295. On an
affected Cortex-A510 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.

The erratum and workaround are the same as ARM Cortex-A520 erratum
2966298, so reuse the existing workaround.

Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-2-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Rename ARM64_WORKAROUND_2966298

commit 546b7cde9b1dd36089649101b75266564600ffe5 upstream.

In preparation to apply ARM64_WORKAROUND_2966298 for multiple errata,
rename the kconfig and capability. No functional change.

Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-1-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Fixup compat mode boot failure

commit 5f449e245e5b0d9d63eef6c8968fbdc3a8594407 upstream.

In COMPAT mode, the STACK_TOP is DEFAULT_MAP_WINDOW (0x80000000), but
the TASK_SIZE is 0x7fff000. When the user stack is upon 0x7fff000, it
will cause a user segment fault. Sometimes, it would cause boot
failure when the whole rootfs is rv32.

Freeing unused kernel image (initmem) memory: 2236K
Run /sbin/init as init process
Starting init: /sbin/init exists but couldn't execute it (error -14)
Run /etc/init as init process
...

Increase the TASK_SIZE to cover STACK_TOP.

Cc: stable@vger.kernel.org
Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Fixup compat arch_get_mmap_end

commit 97b7ac69be2e5a683e898f5267f659fde52efdd5 upstream.

When the task is in COMPAT mode, the arch_get_mmap_end should be 2GB,
not TASK_SIZE_64. The TASK_SIZE has contained is_compat_mode()
detection, so change the definition of STACK_TOP_MAX to TASK_SIZE
directly.

Cc: stable@vger.kernel.org
Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run

commit 206c857dd17d4d026de85866f1b5f0969f2a109e upstream.

In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.

In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.

There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.

CPU0                  CPU1
mtk_jpeg_dec_...    |
  start worker     |
                    |mtk_jpeg_job_timeout_work
mtk_jpeg_remove     |
  v4l2_m2m_release  |
    kfree(m2m_dev); |
                    |
                    | v4l2_m2m_get_curr_priv
                    |   m2m_dev->curr_ctx //use

If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.

Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.

Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mtk-jpeg: Fix timeout schedule error in mtk_jpegdec_worker.

commit 38e1857933def4b3fafc28cc34ff3bbc84cad2c3 upstream.

In mtk_jpegdec_worker, if error occurs in mtk_jpeg_set_dec_dst, it
will start the timeout worker and invoke v4l2_m2m_job_finish at
the same time. This will break the logic of design for there should
be only one function to call v4l2_m2m_job_finish. But now the timeout
handler and mtk_jpegdec_worker will both invoke it.

Fix it by start the worker only if mtk_jpeg_set_dec_dst successfully
finished.

Fixes: da4ede4b7fd6 ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: st-mipid02: correct format propagation

commit b33cb0cbe2893b96ecbfa16254407153f4b55d16 upstream.

Use a copy of the struct v4l2_subdev_format when propagating
format from the sink to source pad in order to avoid impacting the
sink format returned to the application.

Thanks to Jacopo Mondi for pointing the issue.

Fixes: 6c01e6f3f27b ("media: st-mipid02: Propagate format from sink to source pad")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mmc_spi: remove custom DMA mapped buffers

commit 84a6be7db9050dd2601c9870f65eab9a665d2d5d upstream.

There is no need to duplicate what SPI core or individual controller
drivers already do, i.e. mapping the buffers for DMA capable transfers.

Note, that the code, besides its redundancy, was buggy: strictly speaking
there is no guarantee, while it's true for those which can use this code
(see below), that the SPI host controller _is_ the device which does DMA.

Also see the Link tags below.

Additional notes. Currently only two SPI host controller drivers may use
premapped (by the user) DMA buffers:

- drivers/spi/spi-au1550.c

- drivers/spi/spi-fsl-spi.c

Both of them have DMA mapping support code. I don't expect that SPI host
controller code is worse than what has been done in mmc_spi. Hence I do
not expect any regressions here. Otherwise, I'm pretty much sure these
regressions have to be fixed in the respective drivers, and not here.

That said, remove all related pieces of DMA mapping code from mmc_spi.

Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/
Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Use mrq.sbc in close-ended ffu

commit 4d0c8d0aef6355660b6775d57ccd5d4ea2e15802 upstream.

Field Firmware Update (ffu) may use close-ended or open ended sequence.
Each such sequence is comprised of a write commands enclosed between 2
switch commands - to and from ffu mode. So for the close-ended case, it
will be: cmd6->cmd23-cmd25-cmd6.

Some host controllers however, get confused when multi-block rw is sent
without sbc, and may generate auto-cmd12 which breaks the ffu sequence.
I encountered this issue while testing fwupd (github.com/fwupd/fwupd)
on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad.

Instead of a quirk, or hooking the request function of the msm ops,
it would be better to fix the ioctl handling and make it use mrq.sbc
instead of issuing SET_BLOCK_COUNT separately.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: videobuf2-dma-sg: fix vmap callback

commit 608ca5a60ee47b48fec210aeb7a795a64eb5dcee upstream.

For dmabuf import users to be able to use the vaddr from another
videobuf2-dma-sg source, the exporter needs to set a proper vaddr on
vb2_dma_sg_dmabuf_ops_vmap callback. This patch adds vmap on map if
buf->vaddr was not set.

Cc: stable@kernel.org
Fixes: 7938f4218168 ("dma-buf-map: Rename to iosys-map")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/get_abi: fix source path leak

commit 5889d6ede53bc17252f79c142387e007224aa554 upstream.

The code currently leaks the absolute path of the ABI files into the
rendered documentation.

There exists code to prevent this, but it is not effective when an
absolute path is passed, which it is when $srctree is used.

I consider this to be a minimal, stop-gap fix; a better fix would strip
off the actual prefix instead of hacking it off with a regex.

Link: https://mastodon.social/@vegard/111677490643495163
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: kernel_abi.py: fix command injection

commit 3231dd5862779c2e15633c96133a53205ad660ce upstream.

The kernel-abi directive passes its argument straight to the shell.
This is unfortunate and unnecessary.

Let's always use paths relative to $srctree/Documentation/ and use
subprocess.check_call() instead of subprocess.Popen(shell=True).

This also makes the code shorter.

Link: https://fosstodon.org/@jani/111676532203641247
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-2-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dlm: use kernel_connect() and kernel_bind()

commit e9cdebbe23f1aa9a1caea169862f479ab3fa2773 upstream.

Recent changes to kernel_connect() and kernel_bind() ensure that
callers are insulated from changes to the address parameter made by BPF
SOCK_ADDR hooks. This patch wraps direct calls to ops->connect() and
ops->bind() with kernel_connect() and kernel_bind() to protect callers
in such cases.

Link: https://lore.kernel.org/netdev/9944248dba1bce861375fcce9de663934d933ba9.camel@redhat.com/
Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect")
Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind")
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Rife <jrife@google.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lsm: new security_file_ioctl_compat() hook

commit f1bb47a31dff6d4b34fb14e99850860ee74bb003 upstream.

Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).

However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.

This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".

This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.

Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.

Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>