dm: use blk_set_queue_dying() in __dm_destroy()

commit 2e91c3694181dc500faffec16c5aaa0ac5e15449 upstream.

After QUEUE_FLAG_DYING has been set any code that is waiting in
get_request() should be woken up.  But to get this behaviour
blk_set_queue_dying() must be used instead of only setting
QUEUE_FLAG_DYING.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_hw: fix uninitialized variable data

commit 80e84f36412e0c5172447b6947068dca0d04ee82 upstream.

Currently, data variable in ar9003_hw_thermo_cal_apply() could be
uninitialized if ar9300_otp_read_word() will fail to read the value.
Initialize data variable with 0 to prevent an undefined behavior. This
will be enough to handle error case when ar9300_otp_read_word() fails.

Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462")
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved

commit a78986aae9b2988f8493f9f65a587ee433e83bc3 upstream.

Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis.  For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup().  But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.

This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().

Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()).  But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.

[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl

Reported-by: Adam Borowski <kilobyte@angband.pl>
Analyzed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sean: backport to 4.x; resolve conflict in mmu.c]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>

Bluetooth: Fix invalid-free in bcsp_close()

commit cf94da6f502d8caecabd56b194541c873c8a7a3c upstream.

Syzbot reported an invalid-free that I introduced fixing a memleak.

bcsp_recv() also frees bcsp->rx_skb but never nullifies its value.
Nullify bcsp->rx_skb every time it is freed.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+a0d209a4676664613e76@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug: Do not unlock when fails to take the device_hotplug_lock

[ Upstream commit d2ab99403ee00d8014e651728a4702ea1ae5e52c ]

When adding the memory by probing memory block in sysfs interface, there is an
obvious issue that we will unlock the device_hotplug_lock when fails to takes it.

That issue was introduced in Commit 8df1d0e4a265
("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")

We should drop out in time when fails to take the device_hotplug_lock.

Fixes: 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
Reported-by: Yang yingliang <yangyingliang@huawei.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch

[ Upstream commit baf8b9f8d260c55a86405f70a384c29cda888476 ]

Commit b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
broke SPI transfers where bits_per_word != 8. This is because of
mimsatch between McSPI FIFO level event trigger size (SPI word length) and
DMA request size(word length * maxburst). This leads to data
corruption, lockup and errors like:

spi1.0: EOW timed out

Fix this by setting DMA maxburst size to 1 so that
McSPI FIFO level event trigger size matches DMA request size.

Fixes: b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
Cc: stable@vger.kernel.org
Reported-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: keystone: Use quirk to limit MRRS for K2G

[ Upstream commit 148e340c0696369fadbbddc8f4bef801ed247d71 ]

PCI controller in K2G also has a limitation that memory read request
size (MRRS) must not exceed 256 bytes. Use the quirk to limit MRRS
(added for K2HK, K2L and K2E) for K2G as well.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: zynq: Use define directive for PIN_CONFIG_IO_STANDARD

[ Upstream commit cd8a145a066a1a3beb0ae615c7cb2ee4217418d7 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/pinctrl-zynq.c:985:18: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        {"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
        ~               ^~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-zynq.c:990:16: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        = { PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
            ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: lpc18xx: Use define directive for PIN_CONFIG_GPIO_PIN_INT

[ Upstream commit f24bfb39975c241374cadebbd037c17960cf1412 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/pinctrl-lpc18xx.c:643:29: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
        ~                          ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-lpc18xx.c:648:12: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true),
        ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/140
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: spmi-gpio: fix gpio-hog related boot issues

[ Upstream commit 149a96047237574b756d872007c006acd0cc6687 ]

When attempting to setup up a gpio hog, device probing would repeatedly
fail with -EPROBE_DEFERED errors. It was caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.

See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sock: Reset dst when changing sk_mark via setsockopt

[ Upstream commit 50254256f382c56bde87d970f3d0d02fdb76ec70 ]

When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.

This fixes the case where an application wants to change routing by
setting a new sk_mark.  If this is done after some packets have already
been sent, the dst is cached and has no effect.

Signed-off-by: David Barmann <david.barmann@stackpath.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: return correct value 'ret' from bcmgenet_power_down

[ Upstream commit 0db55093b56618088b9a1d445eb6e43b311bea33 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]

bcmgenet_power_down should return 'ret' instead of 0.

Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Use %d for signed int print formatting instead of %u

[ Upstream commit f8ddf49b420112e28bdd23d7ad52d7991a0ccbe3 ]

Fix warnings found using static analysis with cppcheck, use %d printf
format specifier for signed ints rather than %u

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: don't leak kernel pointer to userspace

[ Upstream commit 9de30f3f7f4d31037cfbb7c787e1089c1944b3a7 ]

In copy_result_to_user(), we first create a struct dlm_lock_result, which
contains a struct dlm_lksb, the last member of which is a pointer to the
lvb. Unfortunately, we copy the entire struct dlm_lksb to the result
struct, which is then copied to userspace at the end of the function,
leaking the contents of sb_lvbptr, which is a valid kernel pointer in some
cases (indeed, later in the same function the data it points to is copied
to userspace).

It is an error to leak kernel pointers to userspace, as it undermines KASLR
protections (see e.g. 65eea8edc31 ("floppy: Do not copy a kernel pointer to
user memory in FDGETPRM ioctl") for another example of this).

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix invalid free

[ Upstream commit d968b4e240cfe39d39d80483bac8bca8716fd93c ]

dlm_config_nodes() does not allocate nodes on failure, so we should not
free() nodes when it fails.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces

[ Upstream commit 036cad1f1ac9ce03e2db94b8460f98eaf1e1ee4c ]

On FCoE adapters, when running link bounce test in a loop, initiator
failed to login with switch switch and required driver reload to
recover. Switch reached a point where all subsequent FLOGIs would be
LS_RJT'd. Further testing showed the condition to be related to not
performing FCF discovery between FLOGI's.

Fix by monitoring FLOGI failures and once a repeated error is seen
repeat FCF discovery.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: Fix msleep granularity

[ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ]

In megasas_transition_to_ready() driver waits 180seconds for controller to
change FW state. Here we are calling msleep(1) in a loop for this.  As
explained in timers-howto.txt, msleep(1) will actually sleep longer than
1ms. If a faulty controller is connected, we will end up waiting for much
more than 180 seconds causing unnecessary delays during load.

Change the granularity of msleep() call from 1ms to 1000ms.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11

[ Upstream commit 97f35194093362a63b33caba2485521ddabe2c95 ]

Currently driver is modifying both current & NVRAM/persistent data in
Manufacturing page11. Driver should change only current copy of
Manufacturing page11. It should not modify the persistent data.

So removed the section of code where driver is modifying the persistent
data of Manufacturing page11.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix Sync cache command failure during driver unload

[ Upstream commit 9029a72500b95578a35877a43473b82cb0386c53 ]

This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.

In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.

Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtlwifi: rtl8192de: Fix misleading REG_MCUFWDL information

[ Upstream commit 7d129adff3afbd3a449bc3593f2064ac546d58d3 ]

RT_TRACE shows REG_MCUFWDL value as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireless: airo: potential buffer overflow in sprintf()

[ Upstream commit 3d39e1bb1c88f32820c5f9271f2c8c2fb9a52bac ]

It looks like we wanted to print a maximum of BSSList_rid.ssidLen bytes
of the ssid, but we accidentally use "%*s" (width) instead of "%.*s"
(precision) so if the ssid doesn't have a NUL terminator this could lead
to an overflow.

Static analysis.  Not tested.

Fixes: e174961ca1a0 ("net: convert print_mac to %pM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmsmac: never log "tid x is not agg'able" by default

[ Upstream commit 96fca788e5788b7ea3b0050eb35a343637e0a465 ]

This message greatly spams the log under heavy Tx of frames with BK access
class which is especially true when operating as AP. It is also not informative
as the "agg'ablity" of TIDs are set once and never change.
Fix this by logging only in debug mode.

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtl8xxxu: Fix missing break in switch

[ Upstream commit 307b00c5e695857ca92fc6a4b8ab6c48f988a1b1 ]

Add missing break statement in order to prevent the code from falling
through to the default case.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wlcore: Fix the return value in case of error in 'wlcore_vendor_cmd_smart_config_start()'

[ Upstream commit 3419348a97bcc256238101129d69b600ceb5cc70 ]

We return 0 unconditionally at the end of
'wlcore_vendor_cmd_smart_config_start()'.
However, 'ret' is set to some error codes in several error handling paths
and we already return some error codes at the beginning of the function.

Return 'ret' instead to propagate the error code.

Fixes: 80ff8063e87c ("wlcore: handle smart config vendor commands")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

audit: print empty EXECVE args

[ Upstream commit ea956d8be91edc702a98b7fe1f9463e7ca8c42ab ]

Empty executable arguments were being skipped when printing out the list
of arguments in an EXECVE record, making it appear they were somehow
lost.  Include empty arguments as an itemized empty string.

Reproducer:
autrace /bin/ls "" "/etc"
ausearch --start recent -m execve -i | grep EXECVE
type=EXECVE msg=audit(10/03/2018 13:04:03.208:1391) : argc=3 a0=/bin/ls a2=/etc

With fix:
type=EXECVE msg=audit(10/03/2018 21:51:38.290:194) : argc=3 a0=/bin/ls a1= a2=/etc
type=EXECVE msg=audit(1538617898.290:194): argc=3 a0="/bin/ls" a1="" a2="/etc"

Passes audit-testsuite.  GH issue tracker at
https://github.com/linux-audit/audit-kernel/issues/99

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: cleaned up the commit metadata]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Don't increase sd->balance_interval on newidle balance

[ Upstream commit 3f130a37c442d5c4d66531b240ebe9abfef426b5 ]

When load_balance() fails to move some load because of task affinity,
we end up increasing sd->balance_interval to delay the next periodic
balance in the hopes that next time we look, that annoying pinned
task(s) will be gone.

However, idle_balance() pays no attention to sd->balance_interval, yet
it will still lead to an increase in balance_interval in case of
pinned tasks.

If we're going through several newidle balances (e.g. we have a
periodic task), this can lead to a huge increase of the
balance_interval in a very small amount of time.

To prevent that, don't increase the balance interval when going
through a newidle balance.

This is a similar approach to what is done in commit 58b26c4c0257
("sched: Increment cache_nice_tries only on periodic lb"), where we
disregard newidle balance and rely on periodic balance for more stable
results.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: patrick.bellasi@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1537974727-30788-2-git-send-email-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: do not abort bulk send on BQL status

[ Upstream commit fe60faa5063822f2d555f4f326c7dd72a60929bf ]

Before calling dev_hard_start_xmit(), upper layers tried
to cook optimal skb list based on BQL budget.

Problem is that GSO packets can end up comsuming more than
the BQL budget.

Breaking the loop is not useful, since requeued packets
are ahead of any packets still in the qdisc.

It is also more expensive, since next TX completion will
push these packets later, while skbs are not in cpu caches.

It is also a behavior difference with TSO packets, that can
break the BQL limit by a large amount.

Note that drivers should use __netdev_tx_sent_queue()
in order to have optimal xmit_more support, and avoid
useless atomic operations as shown in the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: fix clusters leak in ocfs2_defrag_extent()

[ Upstream commit 6194ae4242dec0c9d604bc05df83aa9260a899e4 ]

ocfs2_defrag_extent() might leak allocated clusters.  When the file
system has insufficient space, the number of claimed clusters might be
less than the caller wants.  If that happens, the original code might
directly commit the transaction without returning clusters.

This patch is based on code in ocfs2_add_clusters_in_btree().

[akpm@linux-foundation.org: include localalloc.h, reduce scope of data_ac]
Link: http://lkml.kernel.org/r/20180904041621.16874-3-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: don't put and assigning null to bh allocated outside

[ Upstream commit cf76c78595ca87548ca5e45c862ac9e0949c4687 ]

ocfs2_read_blocks() and ocfs2_read_blocks_sync() are both used to read
several blocks from disk.  Currently, the input argument *bhs* can be
NULL or NOT.  It depends on the caller's behavior.  If the function
fails in reading blocks from disk, the corresponding bh will be assigned
to NULL and put.

Obviously, above process for non-NULL input bh is not appropriate.
Because the caller doesn't even know its bhs are put and re-assigned.

If buffer head is managed by caller, ocfs2_read_blocks and
ocfs2_read_blocks_sync() should not evaluate it to NULL.  It will cause
caller accessing illegal memory, thus crash.

Link: http://lkml.kernel.org/r/HK2PR06MB045285E0F4FBB561F9F2F9B3D5680@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Guozhonghua <guozhonghua@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: makefile fix build of .i file in external module case

[ Upstream commit 98356eb0ae499c63e78073ccedd9a5fc5c563288 ]

After 'a66649dab350 arm64: fix vdso-offsets.h dependency' if
one will try to build .i file in case of external kernel module,
build fails complaining that prepare0 target is missing. This
issue came up with SystemTap when it tries to build variety
of .i files for its own generated kernel modules trying to
figure given kernel features/capabilities.

The issue is that prepare0 is defined in top level Makefile
only if KBUILD_EXTMOD is not defined. .i file rule depends
on prepare and in case KBUILD_EXTMOD defined top level Makefile
contains empty rule for prepare. But after mentioned commit
arch/arm64/Makefile would introduce dependency on prepare0
through its own prepare target.

Fix it to put proper ifdef KBUILD_EXTMOD around code introduced
by mentioned commit. It matches what top level Makefile does.

Acked-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntb: intel: fix return value for ndev_vec_mask()

[ Upstream commit 7756e2b5d68c36e170a111dceea22f7365f83256 ]

ndev_vec_mask() should be returning u64 mask value instead of int.
Otherwise the mask value returned can be incorrect for larger
vectors.

Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntb_netdev: fix sleep time mismatch

[ Upstream commit a861594b1b7ffd630f335b351c4e9f938feadb8e ]

The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs.  Change it to match the expected units.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <gerd.haeussler@cesys-it.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: shorten maximum PHC timecounter update interval

[ Upstream commit 094bf4d0e9657f6ea1ee3d7e07ce3970796949ce ]

The timecounter needs to be updated at least once per ~550 seconds in
order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old
timestamp.

Since commit 500462a9d ("timers: Switch to a non-cascading wheel"),
scheduling of delayed work seems to be less accurate and a requested
delay of 540 seconds may actually be longer than 550 seconds. Shorten
the delay to 480 seconds to be sure the timecounter is updated in time.

This fixes an issue with HW timestamps on 82580/I350/I354 being off by
~1100 seconds for few seconds every ~9 minutes.

Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/memory_hotplug: make add_memory() take the device_hotplug_lock

[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]

add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.

In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g.  from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock").  add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.

Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.

The lock is not held yet in
drivers/xen/balloon.c
arch/powerpc/platforms/powernv/memtrace.c
drivers/s390/char/sclp_cmd.c
drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.

Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module.  If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).

Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/hfs/extent.c: fix array out of bounds read of array extent

[ Upstream commit 6c9a3f843a29d6894dfc40df338b91dbd78f0ae3 ]

Currently extent and index i are both being incremented causing an array
out of bounds read on extent[i].  Fix this by removing the extraneous
increment of extent.

Ernesto said:

: This is only triggered when deleting a file with a resource fork.  I
: may be wrong because the documentation isn't clear, but I don't think
: you can create those under linux.  So I guess nobody was testing them.
:
: > A disk space leak, perhaps?
:
: That's what it looks like in general.  hfs_free_extents() won't do
: anything if the block count doesn't add up, and the error will be
: ignored.  Now, if the block count randomly does add up, we could see
: some corruption.

Detected by CoverityScan, CID#711541 ("Out of bounds read")

Link: http://lkml.kernel.org/r/20180831140538.31566-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ernesto A. Fernndez <ernesto.mnd.fernandez@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: update timestamp on truncate()

[ Upstream commit 8cd3cb5061730af085a3f9890a3352f162b4e20c ]

The vfs takes care of updating mtime on ftruncate(), but on truncate() it
must be done by the module.

Link: http://lkml.kernel.org/r/e1611eda2985b672ed2d8677350b4ad8c2d07e8a.1539316825.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfsplus: update timestamps on truncate()

[ Upstream commit dc8844aada735890a6de109bef327f5df36a982e ]

The vfs takes care of updating ctime and mtime on ftruncate(), but on
truncate() it must be done by the module.

This patch can be tested with xfstests generic/313.

Link: http://lkml.kernel.org/r/9beb0913eea37288599e8e1b7cec8768fb52d1b8.1539316825.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: fix return value of hfs_get_block()

[ Upstream commit 1267a07be5ebbff2d2739290f3d043ae137c15b4 ]

Direct writes to empty inodes fail with EIO.  The generic direct-io code
is in part to blame (a patch has been submitted as "direct-io: allow
direct writes to empty inodes"), but hfs is worse affected than the other
filesystems because the fallback to buffered I/O doesn't happen.

The problem is the return value of hfs_get_block() when called with
!create.  Change it to be more consistent with the other modules.

Link: http://lkml.kernel.org/r/4538ab8c35ea37338490525f0f24cbc37227528c.1539195310.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfsplus: fix return value of hfsplus_get_block()

[ Upstream commit 839c3a6a5e1fbc8542d581911b35b2cb5cd29304 ]

Direct writes to empty inodes fail with EIO.  The generic direct-io code
is in part to blame (a patch has been submitted as "direct-io: allow
direct writes to empty inodes"), but hfsplus is worse affected than the
other filesystems because the fallback to buffered I/O doesn't happen.

The problem is the return value of hfsplus_get_block() when called with
!create.  Change it to be more consistent with the other modules.

Link: http://lkml.kernel.org/r/2cd1301404ec7cf1e39c8f11a01a4302f1460ad6.1539195310.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: prevent btree data loss on ENOSPC

[ Upstream commit 54640c7502e5ed41fbf4eedd499e85f9acc9698f ]

Inserting a new record in a btree may require splitting several of its
nodes.  If we hit ENOSPC halfway through, the new nodes will be left
orphaned and their records will be lost.  This could mean lost inodes or
extents.

Henceforth, check the available disk space before making any changes.
This still leaves the potential problem of corruption on ENOMEM.

There is no need to reserve space before deleting a catalog record, as we
do for hfsplus.  This difference is because hfs index nodes have fixed
length keys.

Link: http://lkml.kernel.org/r/ab5fc8a7d5ffccfd5f27b1cf2cb4ceb6c110da74.1536269131.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfsplus: prevent btree data loss on ENOSPC

[ Upstream commit d92915c35bfaf763d78bf1d5ac7f183420e3bd99 ]

Inserting or deleting a record in a btree may require splitting several of
its nodes.  If we hit ENOSPC halfway through, the new nodes will be left
orphaned and their records will be lost.  This could mean lost inodes,
extents or xattrs.

Henceforth, check the available disk space before making any changes.
This still leaves the potential problem of corruption on ENOMEM.

The patch can be tested with xfstests generic/027.

Link: http://lkml.kernel.org/r/4596eef22fbda137b4ffa0272d92f0da15364421.1536269129.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: fix BUG on bnode parent update

[ Upstream commit ef75bcc5763d130451a99825f247d301088b790b ]

hfs_brec_update_parent() may hit BUG_ON() if the first record of both a
leaf node and its parent are changed, and if this forces the parent to
be split.  It is not possible for this to happen on a valid hfs
filesystem because the index nodes have fixed length keys.

For reasons I ignore, the hfs module does have support for a number of
hfsplus features.  A corrupt btree header may report variable length
keys and trigger this BUG, so it's better to fix it.

Link: http://lkml.kernel.org/r/cf9b02d57f806217a2b1bf5db8c3e39730d8f603.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfsplus: fix BUG on bnode parent update

[ Upstream commit 19a9d0f1acf75e8be8cfba19c1a34e941846fa2b ]

Creating, renaming or deleting a file may hit BUG_ON() if the first
record of both a leaf node and its parent are changed, and if this
forces the parent to be split.  This bug is triggered by xfstests
generic/027, somewhat rarely; here is a more reliable reproducer:

  truncate -s 50M fs.iso
  mkfs.hfsplus fs.iso
  mount fs.iso /mnt
  i=1000
  while [ $i -le 2400 ]; do
    touch /mnt/$i &>/dev/null
    ((++i))
  done
  i=2400
  while [ $i -ge 1000 ]; do
    mv /mnt/$i /mnt/$(perl -e "print $i x61") &>/dev/null
    ((--i))
  done

The issue is that a newly created bnode is being put twice.  Reset
new_node to NULL in hfs_brec_update_parent() before reaching goto again.

Link: http://lkml.kernel.org/r/5ee1db09b60373a15890f6a7c835d00e76bf601d.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

linux/bitmap.h: fix type of nbits in bitmap_shift_right()

[ Upstream commit d9873969fa8725dc6a5a21ab788c057fd8719751 ]

Most other bitmap API, including the OOL version __bitmap_shift_right,
take unsigned nbits.  This was accidentally left out from 2fbad29917c98.

Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk
Fixes: 2fbad29917c98 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

linux/bitmap.h: handle constant zero-size bitmaps correctly

[ Upstream commit 7275b097851a5e2e0dd4da039c7e96b59ac5314e ]

The static inlines in bitmap.h do not handle a compile-time constant
nbits==0 correctly (they dereference the passed src or dst pointers,
despite only 0 words being valid to access).  I had the 0-day buildbot
chew on a patch [1] that would cause build failures for such cases without
complaining, suggesting that we don't have any such users currently, at
least for the 70 .config/arch combinations that was built.  Should any
turn up, make sure they use the out-of-line versions, which do handle
nbits==0 correctly.

This is of course not the most efficient, but it's much less churn than
teaching all the static inlines an "if (zero_const_nbits())", and since we
don't have any current instances, this doesn't affect existing code at
all.

[1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk

Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Make line/tty semantics use true write IRQ

[ Upstream commit 917e2fd2c53eb3c4162f5397555cbd394390d4bc ]

This fixes a long standing bug where large amounts of output
could freeze the tty (most commonly seen on stdio console).
While the bug has always been there it became more pronounced
after moving to the new interrupt controller.

The line semantics are now changed to have true IRQ write
semantics which should further improve the tty/line subsystem
stability and performance

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macsec: let the administrator set UP state even if lowerdev is down

[ Upstream commit 07bddef9839378bd6f95b393cf24c420529b4ef1 ]

Currently, the kernel doesn't let the administrator set a macsec device
up unless its lower device is currently up. This is inconsistent, as a
macsec device that is up won't automatically go down when its lower
device goes down.

Now that linkstate propagation works, there's really no reason for this
limitation, so let's remove it.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macsec: update operstate when lower device changes

[ Upstream commit e6ac075882b2afcdf2d5ab328ce4ab42a1eb9593 ]

Like all other virtual devices (macvlan, vlan), the operstate of a
macsec device should match the state of its lower device. This is done
by calling netif_stacked_transfer_operstate from its netdevice notifier.

We also need to call netif_stacked_transfer_operstate when a new macsec
device is created, so that its operstate is set properly. This is only
relevant when we try to bring the device up directly when we create it.

Radu Rendec proposed a similar patch, inspired from the 802.1q driver,
that included changing the administrative state of the macsec device,
instead of just the operstate. This version is similar to what the
macvlan driver does, and updates only the operstate.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock

[ Upstream commit 64081362e8ff4587b4554087f3cfc73d3e0a4cd7 ]

We've recently seen a workload on XFS filesystems with a repeatable
deadlock between background writeback and a multi-process application
doing concurrent writes and fsyncs to a small range of a file.

range_cyclic
writeback Process 1 Process 2

xfs_vm_writepages
  write_cache_pages
    writeback_index = 2
    cycled = 0
    ....
    find page 2 dirty
    lock Page 2
    ->writepage
      page 2 writeback
      page 2 clean
      page 2 added to bio
    no more pages
write()
locks page 1
dirties page 1
locks page 2
dirties page 1
fsync()
....
xfs_vm_writepages
write_cache_pages
  start index 0
  find page 1 towrite
  lock Page 1
  ->writepage
    page 1 writeback
    page 1 clean
    page 1 added to bio
  find page 2 towrite
  lock Page 2
  page 2 is writeback
  <blocks>
write()
locks page 1
dirties page 1
fsync()
....
xfs_vm_writepages
write_cache_pages
  start index 0

    !done && !cycled
      sets index to 0, restarts lookup
    find page 1 dirty
  find page 1 towrite
  lock Page 1
  page 1 is writeback
  <blocks>

    lock Page 1
    <blocks>

DEADLOCK because:

- process 1 needs page 2 writeback to complete to make
  enough progress to issue IO pending for page 1
- writeback needs page 1 writeback to complete so process 2
  can progress and unlock the page it is blocked on, then it
  can issue the IO pending for page 2
- process 2 can't make progress until process 1 issues IO
  for page 1

The underlying cause of the problem here is that range_cyclic writeback is
processing pages in descending index order as we hold higher index pages
in a structure controlled from above write_cache_pages().  The
write_cache_pages() caller needs to be able to submit these pages for IO
before write_cache_pages restarts writeback at mapping index 0 to avoid
wcp inverting the page lock/writeback wait order.

generic_writepages() is not susceptible to this bug as it has no private
context held across write_cache_pages() - filesystems using this
infrastructure always submit pages in ->writepage immediately and so there
is no problem with range_cyclic going back to mapping index 0.

However:
mpage_writepages() has a private bio context,
exofs_writepages() has page_collect
fuse_writepages() has fuse_fill_wb_data
nfs_writepages() has nfs_pageio_descriptor
xfs_vm_writepages() has xfs_writepage_ctx

All of these ->writepages implementations can hold pages under writeback
in their private structures until write_cache_pages() returns, and hence
they are all susceptible to this deadlock.

Also worth noting is that ext4 has it's own bastardised version of
write_cache_pages() and so it /may/ have an equivalent deadlock.  I looked
at the code long enough to understand that it has a similar retry loop for
range_cyclic writeback reaching the end of the file and then promptly ran
away before my eyes bled too much.  I'll leave it for the ext4 developers
to determine if their code is actually has this deadlock and how to fix it
if it has.

There's a few ways I can see avoid this deadlock.  There's probably more,
but these are the first I've though of:

1. get rid of range_cyclic altogether

2. range_cyclic always stops at EOF, and we start again from
writeback index 0 on the next call into write_cache_pages()

2a. wcp also returns EAGAIN to ->writepages implementations to
indicate range cyclic has hit EOF. writepages implementations can
then flush the current context and call wpc again to continue. i.e.
lift the retry into the ->writepages implementation

3. range_cyclic uses trylock_page() rather than lock_page(), and it
skips pages it can't lock without blocking. It will already do this
for pages under writeback, so this seems like a no-brainer

3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid
blocking as per pages under writeback.

I don't think #1 is an option - range_cyclic prevents frequently
dirtied lower file offset from starving background writeback of
rarely touched higher file offsets.

#2 is simple, and I don't think it will have any impact on
performance as going back to the start of the file implies an
immediate seek. We'll have exactly the same number of seeks if we
switch writeback to another inode, and then come back to this one
later and restart from index 0.

#2a is pretty much "status quo without the deadlock". Moving the
retry loop up into the wcp caller means we can issue IO on the
pending pages before calling wcp again, and so avoid locking or
waiting on pages in the wrong order. I'm not convinced we need to do
this given that we get the same thing from #2 on the next writeback
call from the writeback infrastructure.

#3 is really just a band-aid - it doesn't fix the access/wait
inversion problem, just prevents it from becoming a deadlock
situation. I'd prefer we fix the inversion, not sweep it under the
carpet like this.

#3a is really an optimisation that just so happens to include the
band-aid fix of #3.

So it seems that the simplest way to fix this issue is to implement
solution #2

Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ocfs2/dlm/dlmdebug.c: fix a sleep-in-atomic-context bug in dlm_print_one_mle()

[ Upstream commit 999865764f5f128896402572b439269acb471022 ]

The kernel module may sleep with holding a spinlock.

The function call paths (from bottom to top) in Linux-4.16 are:

[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml

[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse
fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse

To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Link: http://lkml.kernel.org/r/20180901112528.27025-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc64: Rework xchg() definition to avoid warnings.

[ Upstream commit 6c2fc9cddc1ffdef8ada1dc8404e5affae849953 ]

Such as:

fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

and

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/process: Fix flush_all_to_thread for SPE

[ Upstream commit e901378578c62202594cba0f6c076f3df365ec91 ]

Fix a bug introduced by the creation of flush_all_to_thread() for
processors that have SPE (Signal Processing Engine) and use it to
compute floating-point operations.

>From userspace perspective, the problem was seen in attempts of
computing floating-point operations which should generate exceptions.
For example:

  fork();
  float x = 0.0 / 0.0;
  isnan(x);           // forked process returns False (should be True)

The operation above also should always cause the SPEFSCR FINV bit to
be set. However, the SPE floating-point exceptions were turned off
after a fork().

Kernel versions prior to the bug used flush_spe_to_thread(), which
first saves SPEFSCR register values in tsk->thread and then calls
giveup_spe(tsk).

After commit 579e633e764e, the save_all() function was called first
to giveup_spe(), and then the SPEFSCR register values were saved in
tsk->thread. This would save the SPEFSCR register values after
disabling SPE for that thread, causing the bug described above.

Fixes 579e633e764e ("powerpc: create flush_all_to_thread()")
Signed-off-by: Felipe Rechia <felipe.rechia@datacom.com.br>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: rcar_thermal: Prevent hardware access during system suspend

[ Upstream commit 3a31386217628ffe2491695be2db933c25dde785 ]

On r8a7791/koelsch, sometimes the following message is printed during
system suspend:

    rcar_thermal e61f0000.thermal: thermal sensor was broken

This happens if the workqueue runs while the device is already
suspended.  Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from happening
during system suspend").

Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Fix to test kprobe $comm arg only if available

[ Upstream commit 2452c96e617a0ff6fb2692e55217a3fa57a7322c ]

Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: max8997: Enale irq-wakeup unconditionally

[ Upstream commit efddff27c886e729a7f84a7205bd84d7d4af7336 ]

IRQ wake up support for MAX8997 driver was initially configured by
respective property in pdata. However, after the driver conversion to
device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD
drivers initialized from device-tree assume that they can be an irq wakeup
source, so enable it also for MAX8997. This fixes support for wakeup from
MAX8997 RTC alarm.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values

[ Upstream commit 55143439b7b501882bea9d95a54adfe00ffc79a3 ]

When trying to read any MC13892 ADC channel on a imx51-babbage board:

The MC13892 PMIC shutdowns completely.

After debugging this issue and comparing the MC13892 and MC13783
initializations done in the vendor kernel, it was noticed that the
CHRGRAWDIV bit of the ADC0 register was not being set.

This bit is set by default after power on, but the driver was
clearing it.

After setting this bit it is possible to read the ADC values correctly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: arizona: Correct calling of runtime_put_sync

[ Upstream commit 6b269a41a4520f7eb639e61a45ebbb9c9267d5e0 ]

Don't call runtime_put_sync when clk32k_ref is ARIZONA_32KZ_MCLK2
as there is no corresponding runtime_get_sync call.

MCLK1 is not in the AoD power domain so if it is used as 32kHz clock
source we need to hold a runtime PM reference to keep the device from
going into low power mode.

Fixes: cdd8da8cc66b ("mfd: arizona: Add gating of external MCLKn clocks")
Signed-off-by: Sapthagiri Baratam <sapthagiri.baratam@cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode

[ Upstream commit 9737cc99dd14b5b8b9d267618a6061feade8ea68 ]

After flushing all mcast entries from the table, the ones contained in
mc list of ndev are not restored when promisc mode is toggled off,
because they are considered as synched with ALE, thus, in order to
restore them after promisc mode - reset syncing info. This fix
touches only switch mode devices, including single port boards
like Beagle Bone.

Fixes: commit 5da1948969bc
("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update")

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: fix a return in qlcnic_dcb_get_capability()

[ Upstream commit c94f026fb742b2d3199422751dbc4f6fc0e753d8 ]

These functions are supposed to return one on failure and zero on
success.  Returning a zero here could cause uninitialized variable
bugs in several of the callers.  For example:

    drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority()
    error: uninitialized symbol 'caps'.

Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mISDN: Fix type of switch control variable in ctrl_teimanager

[ Upstream commit aeb5e02aca91522733eb1db595ac607d30c87767 ]

Clang warns (trimmed for brevity):

drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
        case IMHOLD_L1:
             ^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
        case IMCLEAR_L2:
             ^
2 warnings generated.

The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.

While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).

Link: https://github.com/ClangBuiltLinux/linux/issues/67
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to spread clear_cold_data()

[ Upstream commit 2baf07818549c8bb8d7b3437e889b86eab56d38e ]

We need to drop PG_checked flag on page as well when we clear PG_uptodate
flag, in order to avoid treating the page as GCing one later.

Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: s35390a: Change buf's type to u8 in s35390a_init

[ Upstream commit ef0f02fd69a02b50e468a4ddbe33e3d81671e248 ]

Clang warns:

drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from
'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion]
        buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
            ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
1 warning generated.

Update buf to be an unsigned 8-bit integer, which matches the buf member
in struct i2c_msg.

https://github.com/ClangBuiltLinux/linux/issues/145
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix dentry leak in ceph_readdir_prepopulate

[ Upstream commit c58f450bd61511d897efc2ea472c69630635b557 ]

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc: Fix parport build warnings.

[ Upstream commit 46b8306480fb424abd525acc1763da1c63a27d8a ]

If PARPORT_PC_FIFO is not enabled, do not provide the dma lock
macros and lock definition.  Otherwise:

./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable]
 static DEFINE_SPINLOCK(dma_spin_lock);
                        ^~~~~~~~~~~~~
./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’
 #define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x)

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: omap2-mcspi: Set FIFO DMA trigger level to word length

[ Upstream commit b682cffa3ac6d9d9e16e9b413c45caee3b391fab ]

McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to
configuration FIFO watermark level for DMA trigger to be GCD of transfer
length and max FIFO size which would mean trigger level may be set to 32
for transmit-receive mode if length is aligned. This does not work in
case of SPI slave mode where FIFO always needs to have data ready
whenever master starts the clock. With DMA trigger size of 32 there will
be a small window during slave TX where DMA is still putting data into
FIFO but master would have started clock for next byte, resulting in
shifting out of stale data. Similarly, on Slave RX side there may be RX
FIFO overflow
Fix this by setting FIFO watermark for DMA trigger to word
length. This means DMA is triggered as soon as FIFO has space for word
length bytes and DMA would make sure FIFO is almost always full
therefore improving FIFO occupancy in both master and slave mode.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/perf: Return error when debug_register fails

[ Upstream commit ec0c0bb489727de0d4dca6a00be6970ab8a3b30a ]

Return an error when the function debug_register() fails allocating
the debug handle.
Also remove the registered debug handle when the initialization fails
later on.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: zatm: Fix empty body Clang warnings

[ Upstream commit 64b9d16e2d02ca6e5dc8fcd30cfd52b0ecaaa8f4 ]

Clang warns:

drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
        zwait;
             ^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning

Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.

Link: https://github.com/ClangBuiltLinux/linux/issues/42
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: safely reallow resvport min/max inversion

[ Upstream commit 826799e66e8683e5698e140bb9ef69afc8c0014e ]

Commits ffb6ca33b04b and e08ea3a96fc7 prevent setting xprt_min_resvport
greater than xprt_max_resvport, but may also break simple code that sets
one parameter then the other, if the new range does not overlap the old.

Also it looks racy to me, unless there's some serialization I'm not
seeing.  Granted it would probably require malicious privileged processes
(unless there's a chance these might eventually be settable in unprivileged
containers), but still it seems better not to let userspace panic the
kernel.

Simpler seems to be to allow setting the parameters to whatever you want
but interpret xprt_min_resvport > xprt_max_resvport as the empty range.

Fixes: ffb6ca33b04b "sunrpc: Prevent resvport min/max inversion..."
Fixes: e08ea3a96fc7 "sunrpc: Prevent rexvport min/max inversion..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix a compile warning for cmpxchg64()

[ Upstream commit e732f4485a150492b286f3efc06f9b34dd6b9995 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip: tools: fix atoi() on non-null terminated string

[ Upstream commit e325808c0051b16729ffd472ff887c6cae5c6317 ]

Currently the call to atoi is being passed a single char string
that is not null terminated, so there is a potential read overrun
along the stack when parsing for an integer value.  Fix this by
instead using a 2 char string that is initialized to all zeros
to ensure that a 1 char read into the string is always terminated
with a \0.

Detected by cppcheck:
"Invalid atoi() argument nr 1. A nul-terminated string is required."

Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: misc: appledisplay: fix backlight update_status return code

[ Upstream commit 090158555ff8d194a98616034100b16697dd80d0 ]

Upon success the update_status handler returns a positive number
corresponding to the number of bytes transferred by usb_control_msg.
However the return code of the update_status handler should indicate if
an error occurred(negative) or how many bytes of the user's input to sysfs
that was consumed. Return code zero indicates all bytes were consumed.

The bug can for example result in the update_status handler being called
twice, the second time with only the "unconsumed" part of the user's input
to sysfs. Effectively setting an incorrect brightness.

Change the update_status handler to return zero for all successful
transactions and forward usb_control_msg's error code upon failure.

Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh/windfarm_smu_sat: Fix debug output

[ Upstream commit fc0c8b36d379a046525eacb9c3323ca635283757 ]

There's some antiquated debug output that's trying
to do a hand-made hexdump and turning into horrible
1-byte-per-line output these days.

Use print_hex_dump() instead

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: i2c/cs8427: Fix int to char conversion

[ Upstream commit eb7ebfa3c1989aa8e59d5e68ab3cddd7df1bfb27 ]

Compiling with clang yields the following warning:

sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int'
to 'char' changes value from 160 to -96 [-Wconstant-conversion]
    data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
            ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

Because CS8427_REG_AUTOINC is defined as 128, it is too big for a
char field.
So change data from char to unsigned char, that it can hold the value.

This patch does not change the generated code.

Signed-off-by: Philipp Klocke <philipp97kl@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack

[ Upstream commit c2712b858187f5bcd7b042fe4daa3ba3a12635c0 ]

Andy had some concerns about using regs_get_kernel_stack_nth() in a new
function regs_get_kernel_argument() as if there's any error in the stack
code, it could cause a bad memory access. To be on the safe side, call
probe_kernel_read() on the stack address to be extra careful in accessing
the memory. A helper function, regs_get_kernel_stack_nth_addr(), was added
to just return the stack address (or NULL if not on the stack), that will be
used to find the address (and could be used by other functions) and read the
address with kernel_probe_read().

Requested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181017165951.09119177@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix use-after-free race in xfs_buf_rele

[ Upstream commit 37fd1678245f7a5898c1b05128bc481fb403c290 ]

When looking at a 4.18 based KASAN use after free report, I noticed
that racing xfs_buf_rele() may race on dropping the last reference
to the buffer and taking the buffer lock. This was the symptom
displayed by the KASAN report, but the actual issue that was
reported had already been fixed in 4.19-rc1 by commit e339dd8d8b04
("xfs: use sync buffer I/O for sync delwri queue submission").

Despite this, I think there is still an issue with xfs_buf_rele()
in this code:

        release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
        spin_lock(&bp->b_lock);
        if (!release) {
.....

If two threads race on the b_lock after both dropping a reference
and one getting dropping the last reference so release = true, we
end up with:

CPU 0 CPU 1
atomic_dec_and_lock()
atomic_dec_and_lock()
spin_lock(&bp->b_lock)
spin_lock(&bp->b_lock)
<spins>
<release = true bp->b_lru_ref = 0>
<remove from lists>
freebuf = true
spin_unlock(&bp->b_lock)
xfs_buf_free(bp)
<gets lock, reading and writing freed memory>
<accesses freed memory>
spin_unlock(&bp->b_lock) <reads/writes freed memory>

IOWs, we can't safely take bp->b_lock after dropping the hold
reference because the buffer may go away at any time after we
drop that reference. However, this can be fixed simply by taking the
bp->b_lock before we drop the reference.

It is safe to nest the pag_buf_lock inside bp->b_lock as the
pag_buf_lock is only used to serialise against lookup in
xfs_buf_find() and no other locks are held over or under the
pag_buf_lock there. Make this clear by documenting the buffer lock
orders at the top of the file.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Fix Kconfig dependency on X86

[ Upstream commit 8c590f9776386b8f697fd0b7ed6142ae6e3de79e ]

The Kconfig limitation of X86 is to too wide.
The ENA driver only requires a little endian dependency.

Change the dependency to be on little endian CPU.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix warning in af_unix

[ Upstream commit 33c4368ee2589c165aebd8d388cbd91e9adb9688 ]

This fixes the "'hash' may be used uninitialized in this function"

net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
  addr->hash = hash ^ sk->sk_type;

Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: dc395x: fix DMA API usage in sg_update_list

[ Upstream commit 6c404a68bf83b4135a8a9aa1c388ebdf98e8ba7f ]

We need to transfer device ownership to the CPU before we can manipulate
the mapped data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: dc395x: fix dma API usage in srb_done

[ Upstream commit 3a5bd7021184dec2946f2a4d7a8943f8a5713e52 ]

We can't just transfer ownership to the CPU and then unmap, as this will
break with swiotlb.

Instead unmap the command and sense buffer a little earlier in the I/O
completion handler and get rid of the pci_dma_sync_sg_for_cpu call
entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tegra_sgtl5000: fix device_node refcounting

[ Upstream commit a85227da2dcc291b762c8482a505bc7d0d2d4b07 ]

Similar to the following:

commit 4321723648b0 ("ASoC: tegra_alc5632: fix device_node refcounting")

commit 7c5dfd549617 ("ASoC: tegra: fix device_node refcounting")

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mmp2: fix the clock id for sdh2_clk and sdh3_clk

[ Upstream commit 4917fb90eec7c26dac1497ada3bd4a325f670fcc ]

A typo that makes it impossible to get the correct clocks for
MMP2_CLK_SDH2 and MMP2_CLK_SDH3.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param

[ Upstream commit 20054597f169090109fc3f0dfa1a48583f4178a4 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
                                                 &addr, param, buf);
                                                        ^~~~~
1 warning generated.

iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: isci: Change sci_controller_start_task's return type to sci_status

[ Upstream commit 362b5da3dfceada6e74ecdd7af3991bbe42c0c0f ]

Clang warns when an enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = sci_controller_start_task(ihost,
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
                return SCI_SUCCESS;
                ~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
        return status;
        ~~~~~~ ^~~~~~

Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler

[ Upstream commit e9e9a103528c7e199ead6e5374c9c52cf16b5802 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = SCI_IO_FAILURE_RESPONSE_VALID;
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                status = SCI_IO_FAILURE_RESPONSE_VALID;
                       ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM/x86: Fix invvpid and invept register operand size in 64-bit mode

[ Upstream commit 5ebb272b2ea7e02911a03a893f8d922d49f9bb4a ]

Register operand size of invvpid and invept instruction in 64-bit mode
has always 64 bits. Adjust inline function argument type to reflect
correct size.

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ips: fix missing break in switch

[ Upstream commit 5d25ff7a544889bc4b749fda31778d6a18dddbcb ]

Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.

Addresses-Coverity-ID: 1357338 ("Missing break in switch")
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amiflop: clean up on errors during setup

[ Upstream commit 53d0f8dbde89cf6c862c7a62e00c6123e02cba41 ]

The error handling in fd_probe_drives() doesn't clean up at all. Fix it
up in preparation for converting to blk-mq. While we're here, get rid of
the commented out amiga_floppy_remove().

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: fix command-line parsing when passed from u-boot

[ Upstream commit 381fdd62c38344a771aed06adaf14aae65c47454 ]

This patch fixes command_line array zero-terminated
one byte over the end of the array, causing boot to hang.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: mic: fix a DMA pool free failure

[ Upstream commit 6b995f4eec34745f6cb20d66d5277611f0b3c3fa ]

In _scif_prog_signal(), the boolean variable 'x100' is used to indicate
whether the MIC Coprocessor is X100. If 'x100' is true, the status
descriptor will be used to write the value to the destination. Otherwise, a
DMA pool will be allocated for this purpose. Specifically, if the DMA pool
is allocated successfully, two memory addresses will be returned. One is
for the CPU and the other is for the device to access the DMA pool. The
former is stored to the variable 'status' and the latter is stored to the
variable 'src'. After the allocation, the address in 'src' is saved to
'status->src_dma_addr', which is actually in the DMA pool, and 'src' is
then modified.

Later on, if an error occurs, the execution flow will transfer to the label
'dma_fail', which will check 'x100' and free up the allocated DMA pool if
'x100' is false. The point here is that 'status->src_dma_addr' is used for
freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in
the DMA pool. And thus, the device is able to modify this data. This can
potentially cause failures when freeing up the DMA pool because of the
modified device address.

This patch avoids the above issue by using the variable 'src' (with
necessary calculation) to free up the DMA pool.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gsmi: Fix bug in append_to_eventlog sysfs handler

[ Upstream commit 655603de68469adaff16842ac17a5aec9c9ce89b ]

The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer.  Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)).  The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:

param.data_len = count - sizeof(u32);

This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.

To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"

> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00

> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog

> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog

Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: handle error of get_old_root

[ Upstream commit 315bed43fea532650933e7bba316a7601d439edf ]

In btrfs_search_old_slot get_old_root is always used with the assumption
it cannot fail. However, this is not true in rare circumstance it can
fail and return null. This will lead to null point dereference when the
header is read. Fix this by checking the return value and properly
handling NULL by setting ret to -EIO and returning gracefully.

Coverity-id: 1087503
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mediatek: fix cannot receive new request when msdc_cmd_is_ready fail

[ Upstream commit f38a9774ddde9d79b3487dd888edd8b8623552af ]

when msdc_cmd_is_ready return fail, the req_timeout work has not been
inited and cancel_delayed_work() will return false, then, the request
return directly and never call mmc_request_done().

so need call mod_delayed_work() before msdc_cmd_is_ready()

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sh-msiof: fix deferred probing

[ Upstream commit f34c6e6257aa477cdfe7e9bbbecd3c5648ecda69 ]

Since commit 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
platform_get_irq() can return -EPROBE_DEFER. However, the driver overrides
an error returned by that function with -ENOENT which breaks the deferred
probing. Propagate upstream an error code returned by platform_get_irq()
and remove the bogus "platform" from the error message, while at it...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem

[ Upstream commit 0738b4998c6d1caf9ca2447b946709a7278c70f1 ]

ath10k_pci_diag_write_mem may allocate big size of the dma memory
based on the parameter nbytes. Take firmware diag download as
example, the biggest size is about 500K. In some systems, the
allocation is likely to fail because it can't acquire such a large
contiguous dma memory.

The fix is to allocate a small size dma memory. In the loop,
driver copies the data to the allocated dma memory and writes to
the destination until all the data is written.

Tested with QCA6174 PCI with
firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects
QCA9377 PCI.

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chomium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmsmac: AP mode: update beacon when TIM changes

[ Upstream commit 2258ee58baa554609a3cc3996276e4276f537b6d ]

Beacons are not updated to reflect TIM changes. This is not compliant with
power-saving client stations as the beacons do not have valid TIM and can
cause the network to stall at random occasions and to have highly variable
latencies.
Fix it by updating beacon templates on mac80211 set_tim callback.

Addresses an issue described in:
https://marc.info/?i=20180911163534.21312d08%20()%20manjaro

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/eeh: Fix use of EEH_PE_KEEP on wrong field

[ Upstream commit 473af09b56dc4be68e4af33220ceca6be67aa60d ]

eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.

However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.

The clear statement was added by commit 807a827d4e74 ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Fix signedness bug in update_flash_db()

[ Upstream commit 014704e6f54189a203cc14c7c0bb411b940241bc ]

The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.

This doesn't really change runtime much but it fixes a static checker
warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

synclink_gt(): fix compat_ioctl()

[ Upstream commit 27230e51349fde075598c1b59d15e1ff802f3f6e ]

compat_ptr() for pointer-taking ones...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix marking bitmaps non-full

[ Upstream commit ec23df2b0cf3e1620f5db77972b7fb735f267eff ]

Reservations in gfs can span multiple gfs2_bitmaps (but they won't span
multiple resource groups).  When removing a reservation, we want to
clear the GBF_FULL flags of all involved gfs2_bitmaps, not just that of
the first bitmap.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: fix integer overflow in setup_log_buf()

[ Upstream commit d2130e82e9454304e9b91ba9da551b5989af8c27 ]

The way we calculate logbuf free space percentage overflows signed
integer:

int free;

free = __LOG_BUF_LEN - log_next_idx;
pr_info("early log buf free: %u(%u%%)\n",
free, (free * 100) / __LOG_BUF_LEN);

We support LOG_BUF_LEN of up to 1<<25 bytes. Since setup_log_buf() is
called during early init, logbuf is mostly empty, so

__LOG_BUF_LEN - log_next_idx

is close to 1<<25. Thus when we multiply it by 100, we overflow signed
integer value range: 100 is 2^6 + 2^5 + 2^2.

Example, booting with LOG_BUF_LEN 1<<25 and log_buf_len=2G
boot param:

[    0.075317] log_buf_len: -2147483648 bytes
[    0.075319] early log buf free: 33549896(-28%)

Make "free" unsigned integer and use appropriate printk() specifier.

Link: http://lkml.kernel.org/r/20181010113308.9337-1-sergey.senozhatsky@gmail.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>