phy: qcom-qmp-combo: fix init-count imbalance

commit 9bf03a0cbd80a256bc1e1c4bcc80bc2b06b8b2b9 upstream.

The init counter is not decremented on initialisation errors, which
prevents retrying initialisation and can lead to the runtime suspend
callback attempting to disable resources that have never been enabled.

Add the missing decrement on initialisation errors so that the counter
reflects the state of the device.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230502103810.12061-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix csum_tree_block page iteration to avoid tripping on -Werror=array-bounds

commit 5ad9b4719fc9bc4715c7e19875a962095b0577e7 upstream.

When compiling on a MIPS 64-bit machine we get these warnings:

    In file included from ./arch/mips/include/asm/cacheflush.h:13,
             from ./include/linux/cacheflush.h:5,
             from ./include/linux/highmem.h:8,
     from ./include/linux/bvec.h:10,
     from ./include/linux/blk_types.h:10,
                     from ./include/linux/blkdev.h:9,
             from fs/btrfs/disk-io.c:7:
    fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
    fs/btrfs/disk-io.c:100:34: error: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Werror=array-bounds]
      100 |   kaddr = page_address(buf->pages[i]);
          |                        ~~~~~~~~~~^~~
    ./include/linux/mm.h:2135:48: note: in definition of macro ‘page_address’
     2135 | #define page_address(page) lowmem_page_address(page)
          |                                                ^~~~
    cc1: all warnings being treated as errors

We can check if i overflows to solve the problem. However, this doesn't make
much sense, since i == 1 and num_pages == 1 doesn't execute the body of the loop.
In addition, i < num_pages can also ensure that buf->pages[i] will not cross
the boundary. Unfortunately, this doesn't help with the problem observed here:
gcc still complains.

To fix this add a compile-time condition for the extent buffer page
array size limit, which would eventually lead to eliminating the whole
for loop.

CC: stable@vger.kernel.org # 5.10+
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK

commit 2474e05467c00f7d51af3039b664de6886325257 upstream.

LPUART IP now has two known bugs, one is that CTS has higher priority
than the break signal, which causes the break signal sending through
UARTCTRL_SBK may impacted by the CTS input if the HW flow control is
enabled. It exists on all platforms we support in this driver.
So we add a workaround patch for this issue: commit c4c81db5cf8b
("tty: serial: fsl_lpuart: disable the CTS when send break signal").

Another IP bug is i.MX8QM LPUART may have an additional break character
being sent after SBK was cleared. It may need to add some delay between
clearing SBK and re-enabling CTS to ensure that the SBK latch are
completely cleared.

But we found that during the delay period before CTS is enabled, there
is still a risk that Bluetooth data in TX FIFO may be sent out during
this period because of break off and CTS disabled(even if BT sets CTS
line deasserted, data is still sent to BT).

Due to this risk, we have to drop the CTS-disabling workaround for SBK
bugs, use TXINV seems to be a better way to replace SBK feature and
avoid above risk. Also need to disable the transmitter to prevent any
data from being sent out during break, then invert the TX line to send
break. Then disable the TXINV when turn off break and re-enable
transmitter.

Fixes: c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: pwrseq: sd8787: Fix WILC CHIP_EN and RESETN toggling order

commit 0b5d5c436a5c572a45f976cfd34a6741e143e5d9 upstream.

Chapter "5.3 Power-Up/Down Sequence" of WILC1000 [1] and WILC3000 [2]
states that CHIP_EN must be pulled HIGH first, RESETN second. Fix the
order of these signals in the driver.

Use the mmc_pwrseq_ops as driver data as the delay between signals is
specific to SDIO card type anyway.

[1] https://ww1.microchip.com/downloads/aemDocuments/documents/WSG/ProductDocuments/DataSheets/ATWILC1000-MR110XB-IEEE-802.11-b-g-n-Link-Controller-Module-DS70005326E.pdf
[2] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/IEEE-802.11-b-g-n-Link-Controller-Module-with-Integrated-Bluetooth-5.0-DS70005327B.pdf

Fixes: b2832b96fcf5 ("mmc: pwrseq: sd8787: add support for wilc1000")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230513192352.479627-1-marex@denx.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: vub300: fix invalid response handling

commit a99d21cefd351c8aaa20b83a3c942340e5789d45 upstream.

We may get an empty response with zero length at the beginning of
the driver start and get following UBSAN error. Since there is no
content(SDRT_NONE) for the response, just return and skip the response
handling to avoid this problem.

Test pass : SDIO wifi throughput test with this patch

[  126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12
[  126.980709] index -1 is out of range for type 'u32 [4]'
[  126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G            E      6.3.0-rc4-mtk-local-202304272142 #1
[  126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[  126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300]
[  126.980833] Call Trace:
[  126.980845]  <TASK>
[  126.980860]  dump_stack_lvl+0x48/0x70
[  126.980895]  dump_stack+0x10/0x20
[  126.980916]  ubsan_epilogue+0x9/0x40
[  126.980944]  __ubsan_handle_out_of_bounds+0x70/0x90
[  126.980979]  vub300_cmndwork_thread+0x58e7/0x5e10 [vub300]
[  126.981018]  ? _raw_spin_unlock+0x18/0x40
[  126.981042]  ? finish_task_switch+0x175/0x6f0
[  126.981070]  ? __switch_to+0x42e/0xda0
[  126.981089]  ? __switch_to_asm+0x3a/0x80
[  126.981129]  ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300]
[  126.981174]  ? __kasan_check_read+0x11/0x20
[  126.981204]  process_one_work+0x7ee/0x13d0
[  126.981246]  worker_thread+0x53c/0x1240
[  126.981291]  kthread+0x2b8/0x370
[  126.981312]  ? __pfx_worker_thread+0x10/0x10
[  126.981336]  ? __pfx_kthread+0x10/0x10
[  126.981359]  ret_from_fork+0x29/0x50
[  126.981400]  </TASK>

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mtrr: Revert 90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")

commit f9f57da2c2d119dbf109e3f6e1ceab7659294046 upstream.

Commit

  90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")

broke the use case of running Xen dom0 kernels on machines with an
external disk enclosure attached via USB, see Link tag.

What this commit was originally fixing - SEV-SNP guests on Hyper-V - is
a more specialized situation which has other issues at the moment anyway
so reverting this now and addressing the issue properly later is the
prudent thing to do.

So revert it in time for the 6.2 proper release.

  [ bp: Rewrite commit message. ]

Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/4fe9541e-4d4c-2b2a-f8c8-2d34a7284930@nerdbynature.de
Cc: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: reverse mclk and fclk clocks levels for renoir

commit 55e02c14f9b5fd973ba32a16a715baa42617f9c6 upstream.

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk for renoir.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels are
given the reversed orders by PMFW. Like the memory DPM clocks
that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: reverse mclk and fclk clocks levels for yellow carp

commit f1373a97a41f429e0095d4be388092ffa3c1a157 upstream.

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: reverse mclk clocks levels for SMU v13.0.5

commit c1d35412b3e826ae8119e3fb5f51dd0fa5b6b567 upstream.

This patch reverses the DPM clocks levels output of pp_dpm_mclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: resolve reboot exception for si oland

commit e490d60a2f76bff636c68ce4fe34c1b6c34bbd86 upstream.

During reboot test on arm64 platform, it may failure on boot.

The error message are as follows:
[    1.706570][ 3] [  T273] [drm:si_thermal_enable_alert [amdgpu]] *ERROR* Could not enable thermal interrupts.
[    1.716547][ 3] [  T273] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <si_dpm> failed -22
[    1.727064][ 3] [  T273] amdgpu 0000:02:00.0: amdgpu_device_ip_late_init failed
[    1.734367][ 3] [  T273] amdgpu 0000:02:00.0: Fatal error during GPU init

v2: squash in built warning fix (Alex)

Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: reverse mclk and fclk clocks levels for vangogh

commit bfc03568d9d81332382c73a1985a90c4506bd36c upstream.

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: reverse mclk and fclk clocks levels for SMU v13.0.4

commit 6a07826f2057b5fa1c479ba56460195882464270 upstream.

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable tmz by default for GC 11.0.1

commit 663b930e24842f3d3bb79418bb5cd8d01b40c559 upstream.

Add IP GC 11.0.1 in the list of target to have
tmz enabled by default.

Signed-off-by: Ikshwaku Chauhan <ikshwaku.chauhan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libata-scsi: Use correct device no in ata_find_dev()

commit 7f875850f20a42f488840c9df7af91ef7db2d576 upstream.

For devices not attached to a port multiplier and managed directly by
libata, the device number passed to ata_find_dev() must always be lower
than the maximum number of devices returned by ata_link_max_devices().
That is 1 for SATA devices or 2 for an IDE link with master+slave
devices. This device number is the SCSI device ID which matches these
constraints as the IDs are generated per port and so never exceed the
maximum number of devices for the link being used.

However, for libsas managed devices, SCSI device IDs are assigned per
struct scsi_host, leading to device IDs for SATA devices that can be
well in excess of libata per-link maximum number of devices. This
results in ata_find_dev() to always return NULL for libsas managed
devices except for the first device of the target scsi_host with ID
(device number) equal to 0. This issue is visible by executing the
hdparm utility, which fails. E.g.:

hdparm -i /dev/sdX
/dev/sdX:
  HDIO_GET_IDENTITY failed: No message of desired type

Fix this by rewriting ata_find_dev() to ignore the device number for
non-PMP attached devices with a link with at most 1 device, that is SATA
devices. For these, the device number 0 is always used to
return the correct pointer to the struct ata_device of the port link.
This change excludes IDE master/slave setups (maximum number of devices
per link is 2) and port-multiplier attached devices. Also, to be
consistant with the fact that SCSI device IDs and channel numbers used
as device numbers are both unsigned int, change the devno argument of
ata_find_dev() to unsigned int.

Reported-by: Xingui Yang <yangxingui@huawei.com>
Fixes: 41bda9c98035 ("libata-link: update hotplug to handle PMP links")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: stex: Fix gcc 13 warnings

commit 6d074ce231772c66e648a61f6bd2245e7129d1f5 upstream.

gcc 13 may assign another type to enumeration constants than gcc 12. Split
the large enum at the top of source file stex.c such that the type of the
constants used in time expressions is changed back to the same type chosen
by gcc 12. This patch suppresses compiler warnings like this one:

In file included from ./include/linux/bitops.h:7,
                 from ./include/linux/kernel.h:22,
                 from drivers/scsi/stex.c:13:
drivers/scsi/stex.c: In function ‘stex_common_handshake’:
./include/linux/typecheck.h:12:25: error: comparison of distinct pointer types lacks a cast [-Werror]
   12 |         (void)(&__dummy == &__dummy2); \
      |                         ^~
./include/linux/jiffies.h:106:10: note: in expansion of macro ‘typecheck’
  106 |          typecheck(unsigned long, b) && \
      |          ^~~~~~~~~
drivers/scsi/stex.c:1035:29: note: in expansion of macro ‘time_after’
 1035 |                         if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) {
      |                             ^~~~~~~~~~

See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405.

Cc: stable@vger.kernel.org
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230529195034.3077-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: fastrpc: reject new invocations during device removal

commit 46248400d81e2aa0b65cd659d6f40188192a58b6 upstream.

The channel's rpmsg object allows new invocations to be made. After old
invocations are already interrupted, the driver shouldn't try to invoke
anymore. Invalidating the rpmsg at the end of the driver removal
function makes it easy to cause a race condition in userspace. Even
closing a file descriptor before the driver finishes its cleanup can
cause an invocation via fastrpc_release_current_dsp_process() and
subsequent timeout.

Invalidate the channel before the invocations are interrupted to make
sure that no invocations can be created to hang after the device closes.

Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523152550.438363-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: fastrpc: return -EPIPE to invocations on device removal

commit b6a062853ddf6b4f653af2d8b75ba45bb9a036ad upstream.

The return value is initialized as -1, or -EPERM. The completion of an
invocation implies that the return value is set appropriately, but
"Permission denied" does not accurately describe the outcome of the
invocation. Set the invocation's return value to a more appropriate
"Broken pipe", as the cleanup breaks the driver's connection with rpmsg.

Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523152550.438363-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: fix miscalculation of 'end_sector' in raid5_read_one_chunk()

commit 8557dc27126949c702bd3aafe8a7e0b7e4fcb44c upstream.

'end_sector' is compared to 'rdev->recovery_offset', which is offset to
rdev, however, commit e82ed3a4fbb5 ("md/raid6: refactor
raid5_read_one_chunk") changes the calculation of 'end_sector' to offset
to the array. Fix this miscalculation.

Fixes: e82ed3a4fbb5 ("md/raid6: refactor raid5_read_one_chunk")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230524014118.3172781-1-yukuai1@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Add unbind event before functionfs_unbind

commit efb6b535207395a5c7317993602e2503ca8cb4b3 upstream.

While exercising the unbind path, with the current implementation
the functionfs_unbind would be calling which waits for the ffs->mutex
to be available, however within the same time ffs_ep0_read is invoked
& if no setup packets are pending, it will invoke function
wait_event_interruptible_exclusive_locked_irq which by definition waits
for the ev.count to be increased inside the same mutex for which
functionfs_unbind is waiting.
This creates deadlock situation because the functionfs_unbind won't
get the lock until ev.count is increased which can only happen if
the caller ffs_func_unbind can proceed further.

Following is the illustration:

CPU1 CPU2

ffs_func_unbind() ffs_ep0_read()
mutex_lock(ffs->mutex)
wait_event(ffs->ev.count)
functionfs_unbind()
  mutex_lock(ffs->mutex)
  mutex_unlock(ffs->mutex)

ffs_event_add()

<deadlock>

Fix this by moving the event unbind before functionfs_unbind
to ensure the ev.count is incrased properly.

Fixes: 6a19da111057 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait")
Cc: stable <stable@kernel.org>
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Link: https://lore.kernel.org/r/20230525092854.7992-1-quic_uaggarwa@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM

commit dbe678f6192f27879ac9ff6bc7a1036aad85aae9 upstream.

At iMX8QM platform, enable NCM gadget and run 'iperf3 -s'.
At host, run 'iperf3 -V -c fe80::6863:98ff:feef:3e0%enxc6e147509498'

[  5]   0.00-1.00   sec  1.55 MBytes  13.0 Mbits/sec   90   4.18 KBytes
[  5]   1.00-2.00   sec  1.44 MBytes  12.0 Mbits/sec   75   4.18 KBytes
[  5]   2.00-3.00   sec  1.48 MBytes  12.4 Mbits/sec   75   4.18 KBytes

Expected speed should be bigger than 300Mbits/sec.

The root cause of this performance drop was found to be data corruption
happening at 4K borders in some Ethernet packets, leading to TCP
checksum errors. This corruption occurs from the position
(4K - (address & 0x7F)) to 4K. The u_ether function's allocation of
skb_buff reserves 64B, meaning all RX addresses resemble 0xXXXX0040.

Force trb_burst_size to 16 can fix this problem.

Cc: stable@vger.kernel.org
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230518154946.3666662-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type

commit 7b32040f6d7f885ffc09a6df7c17992d56d2eab8 upstream.

The "snps,hsphy_interface" is string, not u8. Fix the type.

Fixes: 389d77658801 ("dt-bindings: usb: Convert DWC USB3 bindings to DT schema")
Cc: stable <stable@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230515172456.179049-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: qmi_wwan: Set DTR quirk for BroadMobi BM818

commit 36936a56e1814f6c526fe71fbf980beab4f5577a upstream.

BM818 is based on Qualcomm MDM9607 chipset.

Fixes: 9a07406b00cd ("net: usb: qmi_wwan: Add the BroadMobi BM818 card")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.sm
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: build ad5758 driver when AD5758 is selected

commit a146eccb68be161ae9eab5f3f68bb0ed7c0fbaa8 upstream.

Commit 28d1a7ac2a0d ("iio: dac: Add AD5758 support") adds the config AD5758
and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver
is however included when AD5755 is selected, not when AD5758 is selected.

Probably, this was simply a mistake that happened by copy-and-paste and
forgetting to adjust the actual line. Surprisingly, no one has ever noticed
that this driver is actually only included when AD5755 is selected and that
the config AD5758 has actually no effect on the build.

Fixes: 28d1a7ac2a0d ("iio: dac: Add AD5758 support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230508040208.12033-1-lukas.bulwahn@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: stm32-adc: skip adc-diff-channels setup if none is present

commit 9c0d6ccd7d6bbd275e390b55a3390b4274291d95 upstream.

If no adc differential channels are defined driver will fail with EINVAL:
stm32-adc: probe of 48003000.adc:adc@0 failed with error -22

Fix this by skipping the initialization if no channels are defined.

This applies only to the legacy way of initializing adc channels.

Fixes: d7705f35448a ("iio: adc: stm32-adc: convert to device properties")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20230503162029.3654093-1-sean@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7192: Change "shorted" channels to differential

commit e55245d115bb9054cb72cdd5dda5660f4484873a upstream.

The AD7192 provides a specific channel configuration where both negative
and positive inputs are connected to AIN2. This was represented in the
ad7192 driver as a IIO channel with .channel = 2 and .extended_name set
to "shorted".

The problem with this approach, is that the driver provided two IIO
channels with the identifier .channel = 2; one "shorted" and the other
not. This goes against the IIO ABI, as a channel identifier should be
unique.

Address this issue by changing "shorted" channels to being differential
instead, with channel 2 vs. itself, as we're actually measuring AIN2 vs.
itself.

Note that the fix tag is for the commit that moved the driver out of
staging. The bug existed before that, but backporting would become very
complex further down and unlikely to happen.

Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Alisa Roman <alisa.roman@analog.com>
Signed-off-by: Alisa Roman <alisa.roman@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230330102100.17590-1-paul@crapouillou.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: addac: ad74413: fix resistance input processing

commit 24febc99ca725dcf42d57168a2f4e8a75a5ade92 upstream.

On success, ad74413r_get_single_adc_result() returns IIO_VAL_INT aka
1. So currently, the IIO_CHAN_INFO_PROCESSED case is effectively
equivalent to the IIO_CHAN_INFO_RAW case, and we never call
ad74413r_adc_to_resistance_result() to convert the adc measurement to
ohms.

Check ret for being negative rather than non-zero.

Fixes: fea251b6a5dbd (iio: addac: add AD74413R driver)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230503095817.452551-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: mcp4725: Fix i2c_master_send() return value handling

commit 09d3bec7009186bdba77039df01e5834788b3f95 upstream.

The i2c_master_send() returns number of sent bytes on success,
or negative on error. The suspend/resume callbacks expect zero
on success and non-zero on error. Adapt the return value of the
i2c_master_send() to the expectation of the suspend and resume
callbacks, including proper validation of the return value.

Fixes: cf35ad61aca2 ("iio: add mcp4725 I2C DAC driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230511004330.206942-1-marex@denx.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag

commit 626d312028bec44209d0ecd5beaa9b1aa8945f7d upstream.

The Sigma-Delta ADCs supported by this driver can use SDO as an interrupt
line to indicate the completion of a conversion. However, some devices
cannot properly detect the completion of a conversion by an interrupt.
This is for the reason mentioned in the following commit.

commit e9849777d0e2 ("genirq: Add flag to force mask in
                      disable_irq[_nosync]()")

A read operation is performed by an extra interrupt before the completion
of a conversion. At this time, the value read from the ADC data register
is the same as the previous conversion result. This patch fixes the issue
by setting IRQ_DISABLE_UNLAZY flag.

Fixes: 0c6ef985a1fd ("iio: adc: ad7791: fix IRQ flags")
Fixes: 1a913270e57a ("iio: adc: ad7793: Fix IRQ flag")
Fixes: e081102f3077 ("iio: adc: ad7780: Fix IRQ flag")
Fixes: 89a86da5cb8e ("iio: adc: ad7192: Add IRQ flag")
Fixes: 79ef91493f54 ("iio: adc: ad7124: Set IRQ type to falling")
Signed-off-by: Masahiro Honda <honda@mechatrax.com>
Link: https://lore.kernel.org/r/20230518110816.248-1-honda@mechatrax.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: stm32-adc: skip adc-channels setup if none is present

commit 3e27ef0ced49f8ae7883c25fadf76a2086e99025 upstream.

If only adc differential channels are defined driver will fail with
stm32-adc: probe of 48003000.adc:adc@0 failed with error -22

Fix this by skipping the initialization if no channels are defined.

This applies only to the legacy way of initializing adc channels.

Fixes: d7705f35448a ("iio: adc: stm32-adc: convert to device properties")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20230503162029.3654093-2-sean@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light: vcnl4035: fixed chip ID check

commit a551c26e8e568fad42120843521529241b9bceec upstream.

VCNL4035 register(0xE) ID_L and ID_M define as:

 ID_L: 0x80
 ID_H: 7:6 (0:0)
       5:4 (0:0) slave address = 0x60 (7-bit)
           (0:1) slave address = 0x51 (7-bit)
           (1:0) slave address = 0x40 (7-bit)
           (1:0) slave address = 0x41 (7-bit)
       3:0 Version code default (0:0:0:0)

So just check ID_L.

Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230501143605.1615549-1-Frank.Li@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value

commit 55720d242052e860b9fde445e302e0425722e7f1 upstream.

The conversion to json-schema accidentally dropped the "ad" part prefix
from the compatible value.

Fixes: 8c41245872e2 ("dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6b328a3f52657c20759f3a5bb2fe033d47644ba8.1683635404.git.geert+renesas@glider.be
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: inv_icm42600: fix timestamp reset

commit bbaae0c79ebd49f61ad942a8bf9e12bfc7f821bb upstream.

Timestamp reset is not done in the correct place. It must be done
before enabling buffer. The reason is that interrupt timestamping
is always happening when the chip is on, even if the
corresponding sensor is off. When the sensor restarts, timestamp
is wrong if you don't do a reset first.

Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230509152202.245444-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: avoid integer overflow in wacom_intuos_inout()

commit bd249b91977b768ea02bf84d04625d2690ad2b98 upstream.

If high bit is set to 1 in ((data[3] & 0x0f << 28), after all arithmetic
operations and integer promotions are done, high bits in
wacom->serial[idx] will be filled with 1s as well.
Avoid this, albeit unlikely, issue by specifying left operand's __u64
type for the right operand.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 3bea733ab212 ("USB: wacom tablet driver reorganization")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: google: add jewel USB id

commit ed84c4517a5bc536e8572a01dfa11bc22a280d06 upstream.

Add 1 additional hammer-like device.

Signed-off-by: Sung-Chi Li <lschyi@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: mxs-lradc: fix the order of two cleanup operations

commit 27b2ed5b6d53cd62fc61c3f259ae52f5cac23b66 upstream.

Smatch reports:
drivers/iio/adc/mxs-lradc-adc.c:766 mxs_lradc_adc_probe() warn:
missing unwind goto?

the order of three init operation:
1.mxs_lradc_adc_trigger_init
2.iio_triggered_buffer_setup
3.mxs_lradc_adc_hw_init

thus, the order of three cleanup operation should be:
1.mxs_lradc_adc_hw_stop
2.iio_triggered_buffer_cleanup
3.mxs_lradc_adc_trigger_remove

we exchange the order of two cleanup operations,
introducing the following differences:
1.if mxs_lradc_adc_trigger_init fails, returns directly;
2.if trigger_init succeeds but iio_triggered_buffer_setup fails,
goto err_trig and remove the trigger.

In addition, we also reorder the unwind that goes on in the
remove() callback to match the new ordering.

Fixes: 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver")
Signed-off-by: Jiakai Luo <jkluo@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230422133407.72908-1-jkluo@hust.edu.cn
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method

commit 79b8ded9d9c595db9bd5b2f62f5f738b36de1e22 upstream.

When apply_acpi_orientation() fails, st_accel_common_probe() will fall back
to iio_read_mount_matrix(), which checks for a mount-matrix device property
and if that is not set falls back to the identity matrix.

But when a sensor has no ACPI companion fwnode, or when the ACPI fwnode
does not have a "_ONT" method apply_acpi_orientation() was returning 0,
causing iio_read_mount_matrix() to never get called resulting in an
invalid mount_matrix:

[root@fedora ~]# cat /sys/bus/iio/devices/iio\:device0/mount_matrix
(null), (null), (null); (null), (null), (null); (null), (null), (null)

Fix this by making apply_acpi_orientation() always return an error when
it did not set the mount_matrix.

Fixes: 3d8ad94bb175 ("iio: accel: st_sensors: Support generic mounting matrix")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Marius Hoch <mail@mariushoch.de>
Link: https://lore.kernel.org/r/20230416212409.310936-1-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: uvcvideo: Don't expose unsupported formats to userspace

[ Upstream commit 81f3affa19d6ab0c32aef46b053838219eef7e71 ]

When the uvcvideo driver encounters a format descriptor with an unknown
format GUID, it creates a corresponding struct uvc_format instance with
the fcc field set to 0. Since commit 50459f103edf ("media: uvcvideo:
Remove format descriptions"), the driver relies on the V4L2 core to
provide the format description string, which the V4L2 core can't do
without a valid 4CC. This triggers a WARN_ON.

As a format with a zero 4CC can't be selected, it is unusable for
applications. Ignore the format completely without creating a uvc_format
instance, which fixes the warning.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217252
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2180107
Fixes: 50459f103edf ("media: uvcvideo: Remove format descriptions")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug

[ Upstream commit 126310c9f669c9a8c875a3e5c2292299ca90225d ]

While building the shared_cpu_map, check if the cache level and cache
type matches. On certain systems that build the cache topology based on
the instance ID, there are cases where the same ID may repeat across
multiple cache levels, leading inaccurate topology.

In event of CPU offlining, the cache_shared_cpu_map_remove() does not
consider if IDs at same level are being compared. As a result, when same
IDs repeat across different cache levels, the CPU going offline is not
removed from all the shared_cpu_map.

Below is the output of cache topology of CPU8 and it's SMT sibling after
CPU8 is offlined on a dual socket 3rd Generation AMD EPYC processor
(2 x 64C/128T) running kernel release v6.3:

  # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143

  # echo 0 > /sys/devices/system/cpu/cpu8/online

  # for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143

CPU8 is removed from index0 (L1i) but remains in the shared_cpu_list of
index1 (L1d) and index2 (L2). Since L1i, L1d, and L2 are shared by the
SMT siblings, and they have the same cache instance ID, CPU 2 is only
removed from the first index with matching ID which is index1 (L1i) in
this case. With this fix, the results are as expected when performing
the same experiment on the same system:

  # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143

  # echo 0 > /sys/devices/system/cpu/cpu8/online

  # for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143

When rebuilding topology, the same problem appears as
cache_shared_cpu_map_setup() implements a similar logic. Consider the
same 3rd Generation EPYC processor: CPUs in Core 1, that share the L1
and L2 caches, have L1 and L2 instance ID as 1. For all the CPUs on
the second chiplet, the L3 ID is also 1 leading to grouping on CPUs from
Core 1 (1, 17) and the entire second chiplet (8-15, 24-31) as CPUs
sharing one cache domain. This went undetected since x86 processors
depended on arch specific populate_cache_leaves() method to repopulate
the shared_cpus_map when CPU came back online until kernel release
v6.3-rc5.

Fixes: 198102c9103f ("cacheinfo: Fix shared_cpu_map to handle shared caches at different levels")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-2-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()

[ Upstream commit 8fe72b76db79d694858e872370df49676bc3be8c ]

There was a bug where this code forgot to unlock the tdev->mutex if the
kzalloc() failed.  Fix this issue, by moving the allocation outside the
lock.

Fixes: 2d1e952a2b8e ("mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats

[ Upstream commit ed17f89e9502f03af493e130620a9bb74c07cf28 ]

When VCODEC_CAPABILITY_4K_DISABLED is not set in dec_capability, skip
formats that are not MTK_FMT_DEC so only decoder formats is updated in
mtk_init_vdec_params.

Fixes: e25528e1dbe5 ("media: mediatek: vcodec: Use 4K frame size when supported by stateful decoder")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: vgic: Fix locking comment

[ Upstream commit c38b8400aef99d63be2b1ff131bb993465dcafe1 ]

It is now config_lock that must be held, not kvm lock. Replace the
comment with a lockdep annotation.

Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-4-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: vgic: Wrap vgic_its_create() with config_lock

[ Upstream commit 9cf2f840c439b6b23bd99f584f2917ca425ae406 ]

vgic_its_create() changes the vgic state without holding the
config_lock, which triggers a lockdep warning in vgic_v4_init():

[  358.667941] WARNING: CPU: 3 PID: 178 at arch/arm64/kvm/vgic/vgic-v4.c:245 vgic_v4_init+0x15c/0x7a8
...
[  358.707410]  vgic_v4_init+0x15c/0x7a8
[  358.708550]  vgic_its_create+0x37c/0x4a4
[  358.709640]  kvm_vm_ioctl+0x1518/0x2d80
[  358.710688]  __arm64_sys_ioctl+0x7ac/0x1ba8
[  358.711960]  invoke_syscall.constprop.0+0x70/0x1e0
[  358.713245]  do_el0_svc+0xe4/0x2d4
[  358.714289]  el0_svc+0x44/0x8c
[  358.715329]  el0t_64_sync_handler+0xf4/0x120
[  358.716615]  el0t_64_sync+0x190/0x194

Wrap the whole of vgic_its_create() with config_lock since, in addition
to calling vgic_v4_init(), it also modifies the global kvm->arch.vgic
state.

Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-3-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: vgic: Fix a circular locking issue

[ Upstream commit 59112e9c390be595224e427827475a6cd3726021 ]

Lockdep reports a circular lock dependency between the srcu and the
config_lock:

[  262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}:
[  262.182010]        __synchronize_srcu+0xb0/0x224
[  262.183422]        synchronize_srcu_expedited+0x24/0x34
[  262.184554]        kvm_io_bus_register_dev+0x324/0x50c
[  262.185650]        vgic_register_redist_iodev+0x254/0x398
[  262.186740]        vgic_v3_set_redist_base+0x3b0/0x724
[  262.188087]        kvm_vgic_addr+0x364/0x600
[  262.189189]        vgic_set_common_attr+0x90/0x544
[  262.190278]        vgic_v3_set_attr+0x74/0x9c
[  262.191432]        kvm_device_ioctl+0x2a0/0x4e4
[  262.192515]        __arm64_sys_ioctl+0x7ac/0x1ba8
[  262.193612]        invoke_syscall.constprop.0+0x70/0x1e0
[  262.195006]        do_el0_svc+0xe4/0x2d4
[  262.195929]        el0_svc+0x44/0x8c
[  262.196917]        el0t_64_sync_handler+0xf4/0x120
[  262.198238]        el0t_64_sync+0x190/0x194
[  262.199224]
[  262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}:
[  262.201094]        __lock_acquire+0x2b70/0x626c
[  262.202245]        lock_acquire+0x454/0x778
[  262.203132]        __mutex_lock+0x190/0x8b4
[  262.204023]        mutex_lock_nested+0x24/0x30
[  262.205100]        vgic_mmio_write_v3_misc+0x5c/0x2a0
[  262.206178]        dispatch_mmio_write+0xd8/0x258
[  262.207498]        __kvm_io_bus_write+0x1e0/0x350
[  262.208582]        kvm_io_bus_write+0xe0/0x1cc
[  262.209653]        io_mem_abort+0x2ac/0x6d8
[  262.210569]        kvm_handle_guest_abort+0x9b8/0x1f88
[  262.211937]        handle_exit+0xc4/0x39c
[  262.212971]        kvm_arch_vcpu_ioctl_run+0x90c/0x1c04
[  262.214154]        kvm_vcpu_ioctl+0x450/0x12f8
[  262.215233]        __arm64_sys_ioctl+0x7ac/0x1ba8
[  262.216402]        invoke_syscall.constprop.0+0x70/0x1e0
[  262.217774]        do_el0_svc+0xe4/0x2d4
[  262.218758]        el0_svc+0x44/0x8c
[  262.219941]        el0t_64_sync_handler+0xf4/0x120
[  262.221110]        el0t_64_sync+0x190/0x194

Note that the current report, which can be triggered by the vgic_irq
kselftest, is a triple chain that includes slots_lock, but after
inverting the slots_lock/config_lock dependency, the actual problem
reported above remains.

In several places, the vgic code calls kvm_io_bus_register_dev(), which
synchronizes the srcu, while holding config_lock (#1). And the MMIO
handler takes the config_lock while holding the srcu read lock (#0).

Break dependency #1, by registering the distributor and redistributors
without holding config_lock. The ITS also uses kvm_io_bus_register_dev()
but already relies on slots_lock to serialize calls.

The distributor iodev is created on the first KVM_RUN call. Multiple
threads will race for vgic initialization, and only the first one will
see !vgic_ready() under the lock. To serialize those threads, rely on
slots_lock rather than config_lock.

Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR
ioctls and vCPU creation. Similarly, serialize the iodev creation with
slots_lock, and the rest with config_lock.

Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-2-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Deny writable memory mapping if block is read-only

[ Upstream commit 69baa3a623fd2e58624f24f2f23d46f87b817c93 ]

User should not be able to write block device if it is read-only at
block level (e.g force_ro attribute). This is ensured in the regular
fops write operation (blkdev_write_iter) but not when writing via
user mapping (mmap), allowing user to actually write a read-only
block device via a PROT_WRITE mapping.

Example: This can lead to integrity issue of eMMC boot partition
(e.g mmcblk0boot0) which is read-only by default.

To fix this issue, simply deny shared writable mapping if the block
is readonly.

Note: Block remains writable if switch to read-only is performed
after the initial mapping, but this is expected behavior according
to commit a32e236eb93e ("Partially revert "block: fail op_is_write()
requests to read-only partitions"")'.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230510074223.991297-1-loic.poulain@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: Add quirk for Teamgroup MP33 SSD

[ Upstream commit 0649728123cf6a5518e154b4e1735fc85ea4f55c ]

Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.

Signed-off-by: Daniel Smith <dansmith@ds.gy>
[kch: patch formatting]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Daniel Smith <dansmith@ds.gy>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ublk: fix AB-BA lockdep warning

[ Upstream commit ac5902f84bb546c64aea02c439c2579cbf40318f ]

When handling UBLK_IO_FETCH_REQ, ctx->uring_lock is grabbed first, then
ub->mutex is acquired.

When handling UBLK_CMD_STOP_DEV or UBLK_CMD_DEL_DEV, ub->mutex is
grabbed first, then calling io_uring_cmd_done() for canceling uring
command, in which ctx->uring_lock may be required.

Real deadlock only happens when all the above commands are issued from
same uring context, and in reality different uring contexts are often used
for handing control command and IO command.

Fix the issue by using io_uring_cmd_complete_in_task() to cancel command
in ublk_cancel_dev(ublk_cancel_queue).

Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/becol2g7sawl4rsjq2dztsbc7mqypfqko6wzsyoyazqydoasml@rcxarzwidrhk
Cc: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20230517133408.210944-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged

[ Upstream commit c1a322a7a4a96cd0a3dde32ce37af437a78bf8cd ]

When performing device unbind or halt, we have disabled all irqs at the
very begining like amdgpu_pci_remove or amdgpu_device_halt. So
amdgpu_irq_put for irqs stored in fence driver should not be called
any more, otherwise, below calltrace will arrive.

[  139.114088] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:616 amdgpu_irq_put+0xf6/0x110 [amdgpu]
[  139.114655] Call Trace:
[  139.114655]  <TASK>
[  139.114657]  amdgpu_fence_driver_hw_fini+0x93/0x130 [amdgpu]
[  139.114836]  amdgpu_device_fini_hw+0xb6/0x350 [amdgpu]
[  139.114955]  amdgpu_driver_unload_kms+0x51/0x70 [amdgpu]
[  139.115075]  amdgpu_pci_remove+0x63/0x160 [amdgpu]
[  139.115193]  ? __pm_runtime_resume+0x64/0x90
[  139.115195]  pci_device_remove+0x3a/0xb0
[  139.115197]  device_remove+0x43/0x70
[  139.115198]  device_release_driver_internal+0xbd/0x140

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: silence smatch warning in reconnect_caps_cb()

[ Upstream commit 9aaa7eb018661b2da221362d9bacb096bd596f52 ]

Smatch static checker warning:

  fs/ceph/mds_client.c:3968 reconnect_caps_cb()
  warn: missing error code here? '__get_cap_for_mds()' failed. 'err' = '0'

[ idryomov: Dan says that Smatch considers it intentional only if the
  "ret = 0;" assignment is within 4 or 5 lines of the goto. ]

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: hide unused procfs functions

[ Upstream commit fb1b7be9b16c1f4626969ba4e95a97da2a452b41 ]

When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Be more shouty if per-process pgtables aren't working

[ Upstream commit 5c054db54c43a5fcb5cc81012361f5e3fac37637 ]

Otherwise it is not always obvious if a dt or iommu change is causing us
to fall back to global pgtable.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537359/
Link: https://lore.kernel.org/r/20230516222039.907690-2-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: oss: avoid missing-prototype warnings

[ Upstream commit 040b5a046a9e18098580d3ccd029e2318fca7859 ]

Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:

sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]

Avoid this by making the prototypes unconditional.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: do not let the user delete a ctrl before a complete initialization

[ Upstream commit 2eb94dd56a4a4e3fe286def3e2ba207804a37345 ]

If a userspace application performes a "delete_controller" command
early during the ctrl initialization, the delete operation
may race against the init code and the kernel will crash.

nvme nvme5: Connect command failed: host path error
nvme nvme5: failed to connect queue: 0 ret=880
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
 blk_mq_quiesce_queue+0x18/0x90
 nvme_tcp_delete_ctrl+0x24/0x40 [nvme_tcp]
 nvme_do_delete_ctrl+0x7f/0x8b [nvme_core]
 nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
 kernfs_fop_write_iter+0x124/0x1b0
 new_sync_write+0xff/0x190
 vfs_write+0x1ef/0x280

Fix the crash by checking the NVME_CTRL_STARTED_ONCE bit;
if it's not set it means that the nvme controller is still
in the process of getting initialized and the kernel
will return an -EBUSY error to userspace.
Set the NVME_CTRL_STARTED_ONCE later in the nvme_start_ctrl()
function, after the controller start operation is completed.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk

[ Upstream commit 1743e5f6000901a11f4e1cd741bfa9136f3ec9b1 ]

nvme_mpath_remove_disk is called after del_gendisk, at which point a
blk_mark_disk_dead call doesn't make any sense.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT

[ Upstream commit 224a876e37543eee111bf9b6aa4935080e619335 ]

gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
  ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
      |                                ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
  ‘any_addr’ defined but not used [-Werror=unused-const-variable=]
 2979 | static const union nf_inet_addr any_addr;
      |                                 ^~~~~~~~

These variables use is controlled by CONFIG_NF_NAT, so should their definitions.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: t7xx: Ensure init is completed before system sleep

[ Upstream commit ab87603b251134441a67385ecc9d3371be17b7a7 ]

When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[   12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[   12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[   12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[   12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[   12.764776] PM: Some devices failed to suspend, or early wake event detected

Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: b43: fix incorrect __packed annotation

[ Upstream commit 212457ccbd60dba34f965e4ffbe62f0e4f970538 ]

clang warns about an unpacked structure inside of a packed one:

drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]

The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.

As Michael noted, the same problem is present in b43legacy, so
change both at the same time.

Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed

[ Upstream commit 09e797c8641f6ad435c33ae24c223351197ea29a ]

If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target,
scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would
be requeued. The timeout of this request would not fire, no one would
increase iodone_cnt.

The above flow would result the iodone_cnt smaller than iorequest_cnt.  So
decrease the iorequest_cnt if dispatch failed to workaround the issue.

Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com
Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: Add locking to the rate read flow

[ Upstream commit a8938bc881d2a03f9b77f19fae924fe798a01285 ]

The rs_drv_get_rate flow reads the lq_sta to return the optimal rate
for tx frames. This read flow is not protected thereby leaving
a small window, a few instructions wide, open to contention by an
asynchronous rate update. Indeed this race condition was hit and the
update occurred in the middle of the read.

Fix this by locking the lq_sta struct during read.

Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b52c9ed5c379.I15290b78e0d966c1b68278263776ca9de841d5fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: recalc chanctx mindef before assigning

[ Upstream commit 04312de4ced4b152749614e8179f3978a20a992f ]

When we allocate a new channel context, or find an existing one
that is compatible, we currently assign it to a link before its
mindef is updated. This leads to strange situations, especially
in link switching where you switch to an 80 MHz link and expect
it to be active immediately, but the mindef is still configured
to 20 MHz while assigning.  Also, it's strange that the chandef
passed to the assign method's argument is wider than the one in
the context.

Fix this by calculating the mindef with the new link considered
before calling the driver.

In particular, this fixes an iwlwifi problem during link switch
where the firmware would assert because the (link) station that
was added for the AP is configured to transmit at a bandwidth
that's wider than the channel context that it's configured on.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-5-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: consider reserved chanctx for mindef

[ Upstream commit b72a455a2409fd94d6d9b4eb51d659a88213243b ]

When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.

Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.

Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-4-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: simplify chanctx allocation

[ Upstream commit 860e1b43da94551cd1e73adc36b3c64cc3e5dc01 ]

There's no need to call ieee80211_recalc_chanctx_min_def()
since it cannot and won't call the driver anyway; just use
_ieee80211_recalc_chanctx_min_def() instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-3-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: vdso: Pass (void *) to virt_to_page()

[ Upstream commit b0abde80620f42d1ceb3de5e4c1a49cdd5628229 ]

Like the other calls in this function virt_to_page() expects
a pointer, not an integer.

However since many architectures implement virt_to_pfn() as
a macro, this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).

Fix this up with an explicit cast.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2023-May/832583.html
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64/mm: mark private VM_FAULT_X defines as vm_fault_t

[ Upstream commit d91d580878064b880f3574ac35b98d8b70ee8620 ]

This patch fixes several sparse warnings for fault.c:

arch/arm64/mm/fault.c:493:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:493:24: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:493:24: sparse:    got int
arch/arm64/mm/fault.c:501:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:501:32: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:501:32: sparse:    got int
arch/arm64/mm/fault.c:503:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:503:32: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:503:32: sparse:    got int
arch/arm64/mm/fault.c:511:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:511:24: sparse:    expected restricted vm_fault_t
arch/arm64/mm/fault.c:511:24: sparse:    got int
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:713:39: sparse: warning: restricted vm_fault_t degrades to integer

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230502151909.128810-1-minhuadotchen@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: add pin map for CAN controller on stm32f7

[ Upstream commit 011644249686f2675e142519cd59e81e04cfc231 ]

Add pin configurations for using CAN controller on stm32f7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR value

[ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ]

When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.

To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is written, and use it the next
time the register need to be modified.

Signed-off-by: Yun Lu <luyun@kylinos.cn>
Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P

[ Upstream commit 71a485624c4cbb144169852d7bb8ca8c0667d7a3 ]

Add an ACPI IRQ override quirk for LG UltraPC 17U70P to address the
internal keyboard problem on it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216983
Signed-off-by: Rubén Gómez Agudo <mrgommer@proton.me>
[ rjw: Subject, changelog, white space damage fixes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/topology: honour nr_cpu_ids when adding CPUs

[ Upstream commit a33239be2d38ff5a44427db1707c08787508d34a ]

When SMT thread CPUs are added to CPU masks the nr_cpu_ids
limit is not checked and could be exceeded. This leads to
a warning for example if CONFIG_DEBUG_PER_CPU_MAPS is set
and the command line parameter nr_cpus is set to 1.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/pkey: zeroize key blobs

[ Upstream commit 844cf829e5f33e00b279230470c8c93b58b8c16f ]

Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key
material. Zeroize the copies of these keys in kernel memory after
creating the protected key.

Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: pm: save io region state in case of errors in resume

[ Upstream commit 171b53be635ac15d4feafeb33946035649b1ca14 ]

If there are failures in DSP runtime resume, the device state will not
reach active and this makes it impossible e.g. to retrieve a possible
DSP panic dump via "exception" debugfs node. If
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in
cache is stale. If debugfs cache is not used, the region simply cannot
be read.

To allow debugging these scenarios, update the debugfs cache contents in
resume error handler. User-space can then later retrieve DSP panic and
other state via debugfs (requires SOF debugfs cache to be enabled in
build).

Reported-by: Curtis Malainey <cujomalainey@chromium.org
Link: https://github.com/thesofproject/linux/issues/4274
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling

[ Upstream commit bc424273c74c1565c459c8f2a6ed95caee368d0a ]

When an error occurs, we need to make sure the device can pm_runtime
suspend instead of keeping it active.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: pcm: fix pm_runtime imbalance in error handling

[ Upstream commit da0fe8fd515a471d373acc3682bfb5522cca4d55 ]

When an error occurs, we need to make sure the device can pm_runtime
suspend instead of keeping it active.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions

[ Upstream commit 3de975862f985f1c9e225a0d13aa3d501373f7c3 ]

When a firmware IPC error happens during a pm_runtime suspend, we
ignore the error and suspend anyways. However, the code
unconditionally increases the runtime_pm counter. This results in a
confusing configuration where the code will suspend, resume but never
suspend again due to the use of pm_runtime_get_noresume().

The intent of the counter increase was to prevent entry in D3, but if
that transition to D3 is already started it cannot be stopped. In
addition, there's no point in that case in trying to prevent anything,
the firmware error is handled and the next resume will re-initialize
the firmware completely.

This patch changes the logic to prevent suspend when the device is
pm_runtime active and has a use_count > 0.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221

[ Upstream commit 280a8ab81733da8bc442253c700a52c4c0886ffd ]

If the device node of dvb_ca_en50221 is open() and the
device is disconnected, a UAF may occur when calling
close() on the device node.

The root cause is that wake_up() and wait_event() for
dvbdev->wait_queue are not implemented.

So implement wait_event() function in dvb_ca_en50221_release()
and add 'remove_mutex' which prevents race condition
for 'ca->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()

[ Upstream commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 ]

Using a semaphore in the wait_event*() condition is no good idea.
It hits a kernel WARN_ON() at prepare_to_wait_event() like:
  do not call blocking ops when !TASK_RUNNING; state=1 set at
  prepare_to_wait_event+0x6d/0x690

For avoiding the potential deadlock, rewrite to an open-coded loop
instead.  Unlike the loop in wait_event*(), this uses wait_woken()
after the condition check, hence the task state stays consistent.

CVE-2023-31084 was assigned to this bug.

Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de
Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-core: Fix use-after-free due to race at dvb_register_device()

[ Upstream commit 627bb528b086b4136315c25d6a447a98ea9448d3 ]

dvb_register_device() dynamically allocates fops with kmemdup()
to set the fops->owner.
And these fops are registered in 'file->f_ops' using replace_fops()
in the dvb_device_open() process, and kfree()d in dvb_free_device().

However, it is not common to use dynamically allocated fops instead
of 'static const' fops as an argument of replace_fops(),
and UAF may occur.
These UAFs can occur on any dvb type using dvb_register_device(),
such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc.

So, instead of kfree() the fops dynamically allocated in
dvb_register_device() in dvb_free_device() called during the
.disconnect() process, kfree() it collectively in exit_dvbdev()
called when the dvbdev.c module is removed.

Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-core: Fix use-after-free due on race condition at dvb_net

[ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ]

A race condition may occur between the .disconnect function, which
is called when the device is disconnected, and the dvb_device_open()
function, which is called when the device node is open()ed.
This results in several types of UAFs.

The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement
that checks 'dvbnet->exit'.

So, add 'remove_mutex` to protect 'dvbnet->exit' and use
locked_dvb_net_open() function to check 'dvbnet->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table

[ Upstream commit ae11c0efaec32fb45130ee9886689f467232eebc ]

The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:

  drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=]

Link: https://lore.kernel.org/linux-media/20230312131318.351173-28-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()

[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ]

Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(),
which is called when the device is disconnected, dvb_frontend_free()
is not finally called.

This causes a memory leak just by repeatedly plugging and
unplugging the device.

Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().

Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb_ca_en50221: fix a size write bug

[ Upstream commit a4315e5be7020aac9b24a8151caf4bb85224cd0e ]

The function of "dvb_ca_en50221_write_data" at source/drivers/media
/dvb-core/dvb_ca_en50221.c is used for two cases.
The first case is for writing APDU data in the function of
"dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/
dvb_ca_en50221.c.
The second case is for writing the host link buf size on the
Command Register in the function of "dvb_ca_en50221_link_init"
at source/drivers/media/dvb-core/dvb_ca_en50221.c.
In the second case, there exists a bug like following.
In the function of the "dvb_ca_en50221_link_init",
after a TV host calculates the host link buf_size,
the TV host writes the calculated host link buf_size on the
Size Register.
Accroding to the en50221 Spec (the page 60 of
https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf),
before this writing operation, the "SW(CMDREG_SW)" flag in the
Command Register should be set. We can see this setting operation
in the function of the "dvb_ca_en50221_link_init" like below.
...
if ((ret = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
return ret;
...
But, after that, the real writing operation is implemented using
the function of the "dvb_ca_en50221_write_data" in the function of
"dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data"
includes the function of "ca->pub->write_cam_control",
and the function of the "ca->pub->write_cam_control" in the
function of the "dvb_ca_en50221_wrte_data" does not include
"CMDREG_SW" flag like below.
...
if ((status = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0)
...
In the above source code, we can see only the "IRQEN | CMDREG_HC",
but we cannot see the "CMDREG_SW".
The "CMDREG_SW" flag which was set in the function of the
"dvb_ca_en50221_link_init" was rollbacked by the follwoing function
of the "dvb_ca_en50221_write_data".
This is a bug. and this bug causes that the calculated host link buf_size
is not properly written in the CI module.
Through this patch, we fix this bug.

Link: https://lore.kernel.org/linux-media/20220818125027.1131-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: netup_unidvb: fix irq init by register it at the end of probe

[ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]

IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock
is initialized in netup_spi_init(). However, irq handler is registered
before initializing the lock.

Spinlock dma->lock and i2c->lock suffer from the same problem.

Fix this by registering the irq at the end of probe.

Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address

[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ]

In su3000_read_mac_address, if i2c_transfer fails to execute two
messages, array mac address will not be initialized. Without handling
such error, later in function dvb_usb_adapter_dvb_init, proposed_mac
is accessed before initialization.

Fix this error by returning a negative value if message execution fails.

Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()

[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ]

In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach digitv_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer

[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ]

In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()

[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ]

In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()

[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ]

In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null
and msg[i].len is zero, former checks on msg[i].buf would be passed.
If accessing msg[i].buf[0] without sanity check, null pointer deref
would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()

[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ]

In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null,
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in
az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99.
However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0.
We add check on msg[i].len to prevent null-ptr-deref.

Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb_demux: fix a bug for the continuity counter

[ Upstream commit 7efb10d8dc70ea3000cc70dca53407c52488acd1 ]

In dvb_demux.c, some logics exist which compare the expected
continuity counter and the real continuity counter. If they
are not matched each other, both of the expected continuity
counter and the real continuity counter should be printed.
But there exists a bug that the expected continuity counter
is not correctly printed. The expected continuity counter is
replaced with the real countinuity counter + 1 so that
the epected continuity counter is not correclty printed.
This is wrong. This bug is fixed.

Link: https://lore.kernel.org/linux-media/20230305212519.499-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ssm2602: Add workaround for playback distortions

[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]

Apply a workaround for what appears to be a hardware quirk.

The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.

This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).

Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
        i2cset -y 0 0x1a $(($1*2)) $2
}

For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x87 # out, dac
  ssmset 0x06 0x07 # chip
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  (enable MCLK)
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x06 0x1f # chip
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  ssmset 0x06 0x07 # dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  ssmset 0x06 0x07 # out
  NOT OK

For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  (enable MCLK after reset)
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  NOT OK

  ssmset 0x06 0x07 # chip, out, dac
  NOT OK

Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add quirks for ASUS GU604V and GU603V

[ Upstream commit 4b963ae1df6426f0e51de64133d379d9bde50c48 ]

These models use 2 CS35L41 amplifiers using SPI for down-facing
speakers.

alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the
down-facing speakers.

Pin configs are needed to enable headset mic detection.

Note that these models lack the ACPI _DSD properties needed to
initialize the amplifiers. They can be added during boot to get working
sound out of the speakers:
  https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff

Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230511161510.315170-1-ealex95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: Adjust #sound-dai-cells on TI's single-DAI codecs

[ Upstream commit efb2bfd7b3d210c479b9361c176d7426e5eb8663 ]

A bunch of TI's codecs have binding schemas which force #sound-dai-cells
to one despite those codecs only having a single DAI. Allow for bindings
with zero DAI cells and deprecate the former non-zero value.

Signed-off-by: Martin Povišer <povik+lin@cutebit.org
Link: https://lore.kernel.org/r/20230509153412.62847-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Check if_id in inbound policy/secpath match

[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]

This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.

Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.

Test: Tested against Android kernel unit tests & CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: harddog: fix modular build

[ Upstream commit 73a23d7710331a530e972903318528b75e5a5f58 ]

Since we no longer (want to) export any libc symbols the
_user portions of any drivers need to be built into image
rather than the module. I missed this for the watchdog.
Fix the watchdog accordingly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dwc: limit the number of overrun messages

[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]

On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru
Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: yc: Add DMI entry to support System76 Pangolin 12

[ Upstream commit 7b9891ad25246b18b5ccc19518da7abc7763aa0a ]

Add pang12 quirk to enable the internal microphone.

Signed-off-by: Jeremy Soller <jeremy@system76.com
Signed-off-by: Tim Crawford <tcrawford@system76.com
Link: https://lore.kernel.org/r/20230505161458.19676-1-tcrawford@system76.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add quirk for missing secondary temperature thresholds

[ Upstream commit bd375feeaf3408ed00e08c3bc918d6be15f691ad ]

On Kingston KC3000 and Kingston FURY Renegade (both have the same PCI
IDs) accessing temp3_{min,max} fails with an invalid field error (note
that there is no problem setting the thresholds for temp1).

This contradicts the NVM Express Base Specification 2.0b, page 292:

  The over temperature threshold and under temperature threshold
  features shall be implemented for all implemented temperature sensors
  (i.e., all Temperature Sensor fields that report a non-zero value).

Define NVME_QUIRK_NO_SECONDARY_TEMP_THRESH that disables the thresholds
for all but the composite temperature and set it for this device.

Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G

[ Upstream commit 1616d6c3717bae9041a4240d381ec56ccdaafedc ]

Add a quirk to fix HS-SSD-FUTURE 2048G SSD drives reporting duplicate
nsids.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217384
Reported-by: Andrey God <andreygod83@protonmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/rnbd: replace REQ_OP_FLUSH with REQ_OP_WRITE

[ Upstream commit 5e6e08087a4acb4ee3574cea32dbff0f63c7f608 ]

Since flush bios are implemented as writes with no data and
the preflush flag per Christoph's comment [1].

And we need to change it in rnbd accordingly. Otherwise, I
got splatting when create fs from rnbd client.

[  464.028545] ------------[ cut here ]------------
[  464.028553] WARNING: CPU: 0 PID: 65 at block/blk-core.c:751 submit_bio_noacct+0x32c/0x5d0
[ ... ]
[  464.028668] CPU: 0 PID: 65 Comm: kworker/0:1H Tainted: G           OE      6.4.0-rc1 #9
[  464.028671] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[  464.028673] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[  464.028717] RIP: 0010:submit_bio_noacct+0x32c/0x5d0
[  464.028720] Code: 03 0f 85 51 fe ff ff 48 8b 43 18 8b 88 04 03 00 00 85 c9 0f 85 3f fe ff ff e9 be fd ff ff 0f b6 d0 3c 0d 74 26 83 fa 01 74 21 <0f> 0b b8 0a 00 00 00 e9 56 fd ff ff 4c 89 e7 e8 70 a1 03 00 84 c0
[  464.028722] RSP: 0018:ffffaf3680b57c68 EFLAGS: 00010202
[  464.028724] RAX: 0000000000060802 RBX: ffffa09dcc18bf00 RCX: 0000000000000000
[  464.028726] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffa09dde081d00
[  464.028727] RBP: ffffaf3680b57c98 R08: ffffa09dde081d00 R09: ffffa09e38327200
[  464.028729] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa09dde081d00
[  464.028730] R13: ffffa09dcb06e1e8 R14: 0000000000000000 R15: 0000000000200000
[  464.028733] FS:  0000000000000000(0000) GS:ffffa09e3bc00000(0000) knlGS:0000000000000000
[  464.028735] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  464.028736] CR2: 000055a4e8206c40 CR3: 0000000119f06000 CR4: 00000000003506f0
[  464.028738] Call Trace:
[  464.028740]  <TASK>
[  464.028746]  submit_bio+0x1b/0x80
[  464.028748]  rnbd_srv_rdma_ev+0x50d/0x10c0 [rnbd_server]
[  464.028754]  ? percpu_ref_get_many.constprop.0+0x55/0x140 [rtrs_server]
[  464.028760]  ? __this_cpu_preempt_check+0x13/0x20
[  464.028769]  process_io_req+0x1dc/0x450 [rtrs_server]
[  464.028775]  rtrs_srv_inv_rkey_done+0x67/0xb0 [rtrs_server]
[  464.028780]  __ib_process_cq+0xbc/0x1f0 [ib_core]
[  464.028793]  ib_cq_poll_work+0x2b/0xa0 [ib_core]
[  464.028804]  process_one_work+0x2a9/0x580

[1]. https://lore.kernel.org/all/ZFHgefWofVt24tRl@infradead.org/

Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230512034631.28686-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: Fix debugfs_create_dir error checking

[ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ]

The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: stifb: Fix info entry in sti_struct on error path

[ Upstream commit 0bdf1ad8d10bd4e50a8b1a2c53d15984165f7fea ]

Minor fix to reset the info field to NULL in case of error.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: modedb: Add 1920x1080 at 60 Hz video mode

[ Upstream commit c8902258b2b8ecaa1b8d88c312853c5b14c2553d ]

Add typical resolution for Full-HD monitors.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>