kernel/u-boot.git
21 years ago* Patch by Steven Scholz, 10 Oct 2003 LABEL_2003_10_09_2320
wdenk [Thu, 9 Oct 2003 20:09:04 +0000 (20:09 +0000)]
* Patch by Steven Scholz, 10 Oct 2003
  - Add support for Altera FPGA ACEX1K

* Patches by Thomas Lange, 09 Oct 2003:
  - Endian swap ATA identity for all big endian CPUs, not just PPC
  - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
    args to linux
  - add support for dbau1x00 board (MIPS32)

21 years ago* Patches by Thomas Lange, 09 Oct 2003:
wdenk [Thu, 9 Oct 2003 19:00:25 +0000 (19:00 +0000)]
* Patches by Thomas Lange, 09 Oct 2003:
  - fix cmd_ide.c for non ppc boards (read/write functions did not
    add ATA base address)
  - fix for shannon board
  - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code

* Patch by Sangmoon Kim, 07 Oct 2003:
  add support for debris board

21 years ago* Patch by Martin Krause, 09 Oct 2003: LABEL_2003_10_09_1515
wdenk [Thu, 9 Oct 2003 13:16:55 +0000 (13:16 +0000)]
* Patch by Martin Krause, 09 Oct 2003:
  Fixes for TRAB board
  - /board/trab/rs485.c: correct baudrate
  - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
    udelay(); fix some timing problems with adc controller
  - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
    modify commands: touch and buzzer

* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
  (quick & dirty workaround for rogue pointer problem in get_vfatname());
  Use direct function calls for auto_update instead of hush commands

21 years ago* Patch by Scott McNutt, 04 Oct 2003:
wdenk [Wed, 8 Oct 2003 23:26:14 +0000 (23:26 +0000)]
* Patch by Scott McNutt, 04 Oct 2003:
  - add support for Altera Nios-32 CPU
  - add support for Nios Cyclone Development Kit (DK-1C20)

* Patch by Steven Scholz, 29 Sep 2003:
  - A second parameter for bootm overwrites the load address for
    "Standalone Application" images.
  - bootm sets environment variable "filesize" to the resulting
    (uncompressed) data length for "Standalone Application" images
    when autostart is set to "no". Now you can do something like
       if bootm $fpgadata $some_free_ram ; then
               fpga load 0 $some_free_ram $filesize
       fi

* Patch by Denis Peter, 25 Sept 2003:
  add support for the MIP405 Rev. C board

21 years ago* Patch by Yuli Barcohen, 25 Sep 2003:
wdenk [Wed, 8 Oct 2003 22:45:44 +0000 (22:45 +0000)]
* Patch by Yuli Barcohen, 25 Sep 2003:
  add support for Zephyr Engineering ZPC.1900 board

* Patch by Anders Larsen, 23 Sep 2003:
  add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
  implemented for the x86 architecture)

21 years ago* Patch by Sangmoon Kim, 23 Sep 2003:
wdenk [Wed, 8 Oct 2003 22:33:00 +0000 (22:33 +0000)]
* Patch by Sangmoon Kim, 23 Sep 2003:
  fix pll_pci_to_mem_multiplier table for MPC8245

* Patch by Anders Larsen, 22 Sep 2003:
  enable timed autoboot on PXA

* Patch by David Müller, 22 Sep 2003:

  - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
    returns correct libgcc file path
  - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
    time on s3c24x0 systems

* Patch by Jon Diekema, 19 Sep 2003:
  - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
    link state to the fault LED.
  - In NetLoop, make the Fault LED reflect the link status.  The link
    status gets updated on entry, and on timeouts.

21 years ago* Patch by Anders Larsen, 18 Sep 2003:
wdenk [Wed, 8 Oct 2003 22:14:02 +0000 (22:14 +0000)]
* Patch by Anders Larsen, 18 Sep 2003:
  allow mkimage to build and run on Cygwin-hosted systems

* Patch by Frank Müller, 18 Sep 2003:
  use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
  cpu/mpc8xx/fec.c

* Patch by Pantelis Antoniou, 16 Sep 2003:
  add tool to compute fileds in the PLPRCR register for MPC86x

21 years agoUse IH_TYPE_FILESYSTEM for TRAB "disk" images.
wdenk [Tue, 7 Oct 2003 20:01:55 +0000 (20:01 +0000)]
Use IH_TYPE_FILESYSTEM for TRAB "disk" images.

21 years agoFix build problems under FreeBSD
wdenk [Tue, 7 Oct 2003 10:33:38 +0000 (10:33 +0000)]
Fix build problems under FreeBSD

21 years agoAdd generic filesystem image type
wdenk [Mon, 6 Oct 2003 22:00:45 +0000 (22:00 +0000)]
Add generic filesystem image type

21 years ago* Update TRAB auto update code LABEL_2003_10_06_2355
wdenk [Mon, 6 Oct 2003 21:55:32 +0000 (21:55 +0000)]
* Update TRAB auto update code

* Make fatload set filesize environment variable
  fix potential buffer overlow problem

* enable basic / medium / high-end configurations for PPChameleonEVB
  board; fix NAND code

* enable TFTP client code to specify to the server the desired
  timeout value (see RFC-2349)

21 years agoImprove SDRAM setup for TRAB board LABEL_2003_10_01_1830
dzu [Tue, 30 Sep 2003 15:22:12 +0000 (15:22 +0000)]
Improve SDRAM setup for TRAB board

21 years agoSuppress all output with splashscreen configured only if "splashimage"
dzu [Tue, 30 Sep 2003 15:11:43 +0000 (15:11 +0000)]
Suppress all output with splashscreen configured only if "splashimage"
is set

21 years ago* Fix problems with I2C support for mpc5200
dzu [Tue, 30 Sep 2003 14:36:51 +0000 (14:36 +0000)]
* Fix problems with I2C support for mpc5200

21 years agoFix problems with I2C support for mpc5200
dzu [Tue, 30 Sep 2003 14:08:43 +0000 (14:08 +0000)]
Fix problems with I2C support for mpc5200

21 years agoSuppress all output with splashscreen configured only if "splashimage"
dzu [Mon, 29 Sep 2003 21:55:54 +0000 (21:55 +0000)]
Suppress all output with splashscreen configured only if "splashimage"
is set

21 years ago* Adapt TRAB configuration and auto_update to new memory layout
dzu [Mon, 29 Sep 2003 21:55:54 +0000 (21:55 +0000)]
* Adapt TRAB configuration and auto_update to new memory layout

21 years agoAdd configuration for wtk board
dzu [Thu, 25 Sep 2003 22:32:40 +0000 (22:32 +0000)]
Add configuration for wtk board

21 years agoAdd support for the Sharp LQ065T9DR51U LCD display
dzu [Thu, 25 Sep 2003 22:30:12 +0000 (22:30 +0000)]
Add support for the Sharp LQ065T9DR51U LCD display

21 years ago"start" may be legitimately 0x0000
wdenk [Fri, 19 Sep 2003 08:29:25 +0000 (08:29 +0000)]
"start" may be legitimately 0x0000

21 years agoUpdate MPC5200 port pin configuration for Linux CAN drivers.
wdenk [Thu, 18 Sep 2003 20:10:12 +0000 (20:10 +0000)]
Update MPC5200 port pin configuration for Linux CAN drivers.

21 years agoWork on TRAB's auto_update feature. LABEL_2003_09_18_2045
wdenk [Thu, 18 Sep 2003 18:55:25 +0000 (18:55 +0000)]
Work on TRAB's auto_update feature.

Cleanup for submitted patches.

21 years ago* Patch by Rune Torgersen, 17 Sep 2003:
wdenk [Thu, 18 Sep 2003 10:45:21 +0000 (10:45 +0000)]
* Patch by Rune Torgersen, 17 Sep 2003:
  - Fixes for MPC8266 default config
  - Allow eth_loopback_test() on 8260 to use a subset of the FCC's

21 years ago* Patches by Jon Diekema, 17 Sep 2003:
wdenk [Thu, 18 Sep 2003 10:02:25 +0000 (10:02 +0000)]
* Patches by Jon Diekema, 17 Sep 2003:
  - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
    env_common.c)
  - sbc8260 tweaks
  - adjust "help" output

21 years ago* Patches by Anders Larsen, 17 Sep 2003:
wdenk [Thu, 18 Sep 2003 09:21:33 +0000 (09:21 +0000)]
* Patches by Anders Larsen, 17 Sep 2003:
  - fix spelling errors
  - set GD_FLG_DEVINIT flag only after device function pointers
    are valid
  - Allow CFG_ALT_MEMTEST on systems where address zero isn't
    writeable
  - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
  - trigger watchdog while waiting in serial driver

21 years agoSupport new configuration of TRAB board with more memory
wdenk [Wed, 17 Sep 2003 22:48:07 +0000 (22:48 +0000)]
Support new configuration of TRAB board with more memory

Minor cleanup of comments

21 years agoAdd auto-update code for TRAB board using USB memory sticks
wdenk [Wed, 17 Sep 2003 15:10:32 +0000 (15:10 +0000)]
Add auto-update code for TRAB board using USB memory sticks

21 years agoCode cleanup LABEL_2003_09_16_2310
wdenk [Tue, 16 Sep 2003 21:07:28 +0000 (21:07 +0000)]
Code cleanup

21 years ago* Disable MPC5200 bus pipelining as workaround for bus contention
wdenk [Tue, 16 Sep 2003 17:35:37 +0000 (17:35 +0000)]
* Disable MPC5200 bus pipelining as workaround for bus contention

21 years ago* Fix timeout problems with 1st packet on MPC5200
wdenk [Tue, 16 Sep 2003 17:29:31 +0000 (17:29 +0000)]
* Fix timeout problems with 1st packet on MPC5200

21 years agoDisable MPC5200 bus pipelining as workaround for bus contention
wdenk [Tue, 16 Sep 2003 17:20:34 +0000 (17:20 +0000)]
Disable MPC5200 bus pipelining as workaround for bus contention

21 years ago* Modify XLB arbiter priorities on MPC5200 so all devices use same
wdenk [Tue, 16 Sep 2003 17:06:05 +0000 (17:06 +0000)]
* Modify XLB arbiter priorities on MPC5200 so all devices use same
  priority; configure critical interrupts to be handled like external
  interrupts

21 years agoMake IPB clock on MGT5100/MPC5200 configurable in board config file;
wdenk [Tue, 16 Sep 2003 11:39:10 +0000 (11:39 +0000)]
Make IPB clock on MGT5100/MPC5200 configurable in board config file;
go back to 66 MHz for stability

21 years agoCleanup of code, output formatting, and indentation.
wdenk [Mon, 15 Sep 2003 21:14:37 +0000 (21:14 +0000)]
Cleanup of code, output formatting, and indentation.

21 years ago* Patches by Jon Diekema, 15 Sep 2003:
wdenk [Mon, 15 Sep 2003 18:00:00 +0000 (18:00 +0000)]
* Patches by Jon Diekema, 15 Sep 2003:
  - add description for missing CFG_CMD_* entries in the README file
  - sacsng tweaks:
   include/configs/sacsng.h:
       + Support extra bootp options like: 2nd DNS and send hostname
       + Enabling ping and irq command
       + Adding defines for a bunch of misc configrabled options
         (patches for these options will be coming)
       + Adding watchdog support, but it isn't enabled yet.

   board/sacsng/sacsng.c:

       + Suppressing unneeded output when the quiet environment
 is non-zero.
       + show_boot_progress() now accepts any negative number as a
 failure code.
       + show_boot_progress() flashes the error code 5 times, and
         then resets the board to retry the boot from the top

* Patch by Gleb Natapov, 14 Sep 2003:
  enable watchdog support for all MPC824x boards that have a watchdog

21 years ago* Patch by Gleb Natapov, 14 Sep 2003:
wdenk [Sun, 14 Sep 2003 19:08:39 +0000 (19:08 +0000)]
* Patch by Gleb Natapov, 14 Sep 2003:
  enable watchdog support for all MPC824x boards that have a watchdog

* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
  "Non-octet Aligned Frame" errors we see at 100 Mbps

* Patch by Sharad Gupta, 14 Sep 2003:
  fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])

21 years ago* Patch by llandre, 11 Sep 2003:
wdenk [Sat, 13 Sep 2003 19:13:29 +0000 (19:13 +0000)]
* Patch by llandre, 11 Sep 2003:
  update configuration for PPChameleonEVB board

21 years ago* Patch by David Müller, 13 Sep 2003: LABEL_2003_09_13_2100
wdenk [Sat, 13 Sep 2003 19:01:12 +0000 (19:01 +0000)]
* Patch by David Müller, 13 Sep 2003:
  various changes to VCMA9 board specific files

* Add I2C support for MGT5100 / MPC5200

21 years ago* Patch by Rune Torgersen, 11 Sep 2003:
wdenk [Fri, 12 Sep 2003 20:09:09 +0000 (20:09 +0000)]
* Patch by Rune Torgersen, 11 Sep 2003:
  Changed default memory option on MPC8266ADS to NOT be Page Based
  Interleave, since this doesn't work very well with the standard
  16MB DIMM

* Patch by George G. Davis, 12 Sep 2003:
  fix Makefile settings for sk98 driver

21 years agoMove TRAB burn-in tests to TRAB board directory LABEL_2003_09_12_1745
wdenk [Fri, 12 Sep 2003 15:35:15 +0000 (15:35 +0000)]
Move TRAB burn-in tests to TRAB board directory

21 years agoPatch by Stefan Roese, 12 Sep 2003
stroese [Fri, 12 Sep 2003 08:57:52 +0000 (08:57 +0000)]
Patch by Stefan Roese, 12 Sep 2003

21 years agoNew boards DP405, HUB405, PLU405, VOH405 added.
stroese [Fri, 12 Sep 2003 08:57:15 +0000 (08:57 +0000)]
New boards DP405, HUB405, PLU405, VOH405 added.

21 years agoNew board config file added.
stroese [Fri, 12 Sep 2003 08:55:18 +0000 (08:55 +0000)]
New board config file added.

21 years agoUpdate configuration.
stroese [Fri, 12 Sep 2003 08:53:54 +0000 (08:53 +0000)]
Update configuration.

21 years agoPPC405EP: set vendor id.
stroese [Fri, 12 Sep 2003 08:52:09 +0000 (08:52 +0000)]
PPC405EP: set vendor id.

21 years agoDisable memory controller before setting first values.
stroese [Fri, 12 Sep 2003 08:49:58 +0000 (08:49 +0000)]
Disable memory controller before setting first values.

21 years agoPMC405 update.
stroese [Fri, 12 Sep 2003 08:46:58 +0000 (08:46 +0000)]
PMC405 update.

21 years agoPCI405 update.
stroese [Fri, 12 Sep 2003 08:46:10 +0000 (08:46 +0000)]
PCI405 update.

21 years agoCPCI405(AB) update.
stroese [Fri, 12 Sep 2003 08:44:46 +0000 (08:44 +0000)]
CPCI405(AB) update.

21 years agoASH405 update.
stroese [Fri, 12 Sep 2003 08:43:46 +0000 (08:43 +0000)]
ASH405 update.

21 years agoXilinx jtag tool added.
stroese [Fri, 12 Sep 2003 08:42:58 +0000 (08:42 +0000)]
Xilinx jtag tool added.

21 years agoBoard VOH405 added.
stroese [Fri, 12 Sep 2003 08:42:13 +0000 (08:42 +0000)]
Board VOH405 added.

21 years agoBoard PLU405 added.
stroese [Fri, 12 Sep 2003 08:41:56 +0000 (08:41 +0000)]
Board PLU405 added.

21 years agoBoard HUB405 added.
stroese [Fri, 12 Sep 2003 08:41:39 +0000 (08:41 +0000)]
Board HUB405 added.

21 years agoBoard DP405 added.
stroese [Fri, 12 Sep 2003 08:41:24 +0000 (08:41 +0000)]
Board DP405 added.

21 years ago* Patch by Martin Krause, 11 Sep 2003: LABEL_2003_09_12_0110
wdenk [Thu, 11 Sep 2003 23:06:34 +0000 (23:06 +0000)]
* Patch by Martin Krause, 11 Sep 2003:
  add burn-in tests for TRAB board

* Enable instruction cache on MPC5200 board

21 years ago* Patch by Gary Jennejohn, 11 Sep 2003:
wdenk [Thu, 11 Sep 2003 19:48:06 +0000 (19:48 +0000)]
* Patch by Gary Jennejohn, 11 Sep 2003:
  - allow for longer timeouts for USB mass storage devices

* Patch by Denis Peter, 11 Sep 2003:
  - fix USB data pointer assignment for bulk only transfer.
  - prevent to display erased directories in FAT filesystem.

* Change output format for NAND flash - make it look like for other
  memory, too

21 years ago* Patches by Denis Peter, 9 Sep 2003: U-Boot-0_4_8
wdenk [Wed, 10 Sep 2003 22:30:53 +0000 (22:30 +0000)]
* Patches by Denis Peter, 9 Sep 2003:
  add FAT support for IDE, SCSI and USB

* Patches by Gleb Natapov, 2 Sep 2003:
  - cleanup of POST code for unsupported architectures
  - MPC824x locks way0 of data cache for use as initial RAM;
    this patch unlocks it after relocation to RAM and invalidates
    the locked entries.

* Patch by Gleb Natapov, 30 Aug 2003:
  new I2C driver for mpc107 bridge. Now works from flash.

* Patch by Dave Ellis, 11 Aug 2003:
  - JFFS2: fix typo in common/cmd_jffs2.c
  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
  - JFFS2: remove node version 0 warning
  - JFFS2: accept JFFS2 PADDING nodes
  - SXNI855T: add AM29LV800 support
  - SXNI855T: move environment from EEPROM to flash
  - SXNI855T: boot from JFFS2 in NOR or NAND flash

* Patch by Bill Hargen, 11 Aug 2003:
  fixes for I2C on MPC8240
  - fix i2c_write routine
  - fix iprobe command
  - eliminates use of global variables, plus dead code, cleanup.

21 years ago* Add support for USB Mass Storage Devices (BBB)
wdenk [Wed, 10 Sep 2003 18:20:28 +0000 (18:20 +0000)]
* Add support for USB Mass Storage Devices (BBB)
  (tested with USB memory sticks only)

* Avoid flicker on TRAB's VFD

21 years ago* Add support for SK98xx driver LABEL_2003_09_06_0055
wdenk [Fri, 5 Sep 2003 23:19:14 +0000 (23:19 +0000)]
* Add support for SK98xx driver

* Add PCI support for SL8245 board

* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly

* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
  to allow for more accurate baudrate settings
  (error now 0.7% at 115 kbps, instead of 3.5% before)

* Patch by Andreas Mohr, 4 Sep 2003:
  Fix a lot of spelling errors

21 years agoAdjustments / cleanup for PPChameleon EVB board
wdenk [Wed, 3 Sep 2003 14:03:26 +0000 (14:03 +0000)]
Adjustments / cleanup for PPChameleon EVB board

21 years agoFix compile problem
wdenk [Tue, 2 Sep 2003 23:08:13 +0000 (23:08 +0000)]
Fix compile problem

21 years ago* Add support for PPChameleon Eval Board
wdenk [Tue, 2 Sep 2003 22:48:03 +0000 (22:48 +0000)]
* Add support for PPChameleon Eval Board

* Add support for P3G4 board

* Fix problem with MGT5100 FEC driver: add "early" MAC address
  initialization

21 years agoPatch by Yuli Barcohen, 7 Aug 2003:
wdenk [Sun, 31 Aug 2003 18:37:54 +0000 (18:37 +0000)]
Patch by Yuli Barcohen, 7 Aug 2003:

According to the MPC8260 User's Manual, PCI_MODE signal should be
reflected in SCCR register, and local bus pins configuration is taken
from HRCW and appears in SIUMCR. For some reason it does not work
this way, so the only possibility to detect if the board is
configured in PCI mode is to check the BCSR. This patch sets SCCR and
SIUMCR according to the BCSR.

21 years agoPatch by Raghu Krishnaprasad, 7 Aug 2003: U-Boot-0_4_7
wdenk [Sat, 30 Aug 2003 00:05:50 +0000 (00:05 +0000)]
Patch by Raghu Krishnaprasad, 7 Aug 2003:
add support for Adder II MPC852T module

21 years ago* Patch by George G. Davis, 19 Aug 2003:
wdenk [Fri, 29 Aug 2003 22:00:43 +0000 (22:00 +0000)]
* Patch by George G. Davis, 19 Aug 2003:
  fix TI Innovator/OMAP1510 pin configs

* Patches by Kshitij, 18 Aug 2003
  - add support for arm926ejs cpu core
  - add support for TI OMAP 1610 Innovator Board

21 years agoPatch by Yuli Barcohen, 14 Aug 2003:
wdenk [Fri, 29 Aug 2003 20:57:53 +0000 (20:57 +0000)]
Patch by Yuli Barcohen, 14 Aug 2003:
add support for bzip2 uncompression

21 years agoAdd I2C and RTC support for RMU board using software I2C driver
wdenk [Fri, 29 Aug 2003 10:05:53 +0000 (10:05 +0000)]
Add I2C and RTC support for RMU board using software I2C driver
(because of better response to iprobe command); fix problem with
"reset" command

21 years agoPatch from Matthias Fuchs.
stroese [Thu, 28 Aug 2003 14:24:37 +0000 (14:24 +0000)]
Patch from Matthias Fuchs.

21 years ago- Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to CONFIG_BOOTP_MASK.
stroese [Thu, 28 Aug 2003 14:17:32 +0000 (14:17 +0000)]
- Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to CONFIG_BOOTP_MASK.

21 years ago* Fix ICU862 environment problem
wdenk [Thu, 28 Aug 2003 09:41:22 +0000 (09:41 +0000)]
* Fix ICU862 environment problem

* Fix RAM size detection for RMU board

* Implement "reset" for MGT5100/MPC5200 systems

21 years ago* Make Ethernet autonegotiation on INCA-IP work for all clock rates; U-Boot-0_4_6
wdenk [Sun, 17 Aug 2003 18:55:18 +0000 (18:55 +0000)]
* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
  allow selection of clock frequency as "make" target

* Implement memory autosizing code for IceCube boards

* Configure network port on INCA-IP for autonegotiation

* Fix overflow problem in network timeout code

* Patch by Richard Woodruff, 8 Aug 2003:
  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).

21 years agoUpdate for TQM board defaults: U-Boot-0_4_5
wdenk [Thu, 7 Aug 2003 22:18:11 +0000 (22:18 +0000)]
Update for TQM board defaults:
disable clocks_in_mhz, enable boot count limit

21 years agoRemoved tools/gdb from "make all" target. Added make target "gdbtools"
dzu [Thu, 7 Aug 2003 15:04:48 +0000 (15:04 +0000)]
Removed tools/gdb from "make all" target.  Added make target "gdbtools"
in toplevel directory instead.  Removed astest.c from tools/gdb because
it is no longer relevant.

21 years agoDisable debug print for normal use.
wdenk [Thu, 7 Aug 2003 14:52:18 +0000 (14:52 +0000)]
Disable debug print for normal use.
Fix MPC5200 FEC driver

21 years agoRemoved the file tools/gdb/astest.c
dzu [Thu, 7 Aug 2003 14:22:10 +0000 (14:22 +0000)]
Removed the file tools/gdb/astest.c

21 years agoRemoved tools/gdb from "make all" target. Added make target "gdbtools"
dzu [Thu, 7 Aug 2003 14:20:31 +0000 (14:20 +0000)]
Removed tools/gdb from "make all" target.  Added make target "gdbtools"
in toplevel directory instead.  Removed astest.c from tools/gdb because
it is no longer relevant.

21 years ago* Fix PCI support for MPC5200 / IceCube Board
wdenk [Tue, 5 Aug 2003 18:22:44 +0000 (18:22 +0000)]
* Fix PCI support for MPC5200 / IceCube Board

21 years ago* Map ISP1362 USB OTG controller for NSCU board
wdenk [Tue, 5 Aug 2003 17:43:17 +0000 (17:43 +0000)]
* Map ISP1362 USB OTG controller for NSCU board

* Patch by Brad Parker, 02 Aug 2003:
  fix sc520_cdp problems

* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)

* Allow erase command to cross flash bank boundaries

21 years agoMust enable timebase earlier on MPC5200
wdenk [Thu, 31 Jul 2003 22:56:30 +0000 (22:56 +0000)]
Must enable timebase earlier on MPC5200

21 years ago* Patch by Scott McNutt, 21 Jul 2003:
wdenk [Sun, 27 Jul 2003 00:21:01 +0000 (00:21 +0000)]
* Patch by Scott McNutt, 21 Jul 2003:
  Add support for LynuxWorks Kernel Downloadable Images (KDIs).
  Both LynxOS and BlueCat linux KDIs are supported.

* Patch by Richard Woodruff, 25 Jul 2003:
  use more reliable reset for OMAP/925T

* Patch by Nye Liu, 25 Jul 2003:
  fix typo in mpc8xx.h

* Patch by Richard Woodruff, 24 Jul 2003:
  Fixes for cmd_nand.c:
  - Fixed null dereferece which could result in incorrect ECC values.
  - Added support for devices with no Ready/Busy signal hooked up.
  - Added OMAP1510 read/write protect handling.
  - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
    for non-JFFS2.
  - Switched default ECC to be JFFS2.

21 years ago* Allow crc32 to be used at address 0x000
wdenk [Sat, 26 Jul 2003 08:08:08 +0000 (08:08 +0000)]
* Allow crc32 to be used at address 0x000

* Provide consistent interface to standalone applications to access
  the 'global_data' structure
  Provide a doc/README.standalone more useful to users/developers.

* Make IceCube MGT5100 FEC driver work

21 years ago* Implement new mechanism to export U-Boot's functions to standalone
wdenk [Thu, 24 Jul 2003 23:38:38 +0000 (23:38 +0000)]
* Implement new mechanism to export U-Boot's functions to standalone
  applications: instead of using (PPC-specific) system calls we now
  use a jump table; please see doc/README.standalone for details

* Patch by Dave Westwood, 24 Jul 2003:
  added support for Unity OS (a proprietary OS)

21 years ago* Patch by Martin Krause, 17 Jul 2003:
wdenk [Thu, 17 Jul 2003 23:16:40 +0000 (23:16 +0000)]
* Patch by Martin Krause, 17 Jul 2003:
  add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS

21 years ago* Add support for IceCube board (with MGT5100 and MPC5200 CPUs) U-Boot-0_4_4
wdenk [Wed, 16 Jul 2003 21:53:01 +0000 (21:53 +0000)]
* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)

* Add support for MGT5100 and MPC5200 processors

21 years agoIncorporate Patch by Lutz Dennig, 15 Jul 2003.
wdenk [Wed, 16 Jul 2003 16:40:22 +0000 (16:40 +0000)]
Incorporate Patch by Lutz Dennig, 15 Jul 2003.

21 years agoMode modem init support to F3+F4 key combination U-Boot-0_4_3
wdenk [Tue, 15 Jul 2003 22:00:22 +0000 (22:00 +0000)]
Mode modem init support to F3+F4 key combination

21 years agoAvoid unnecessary call to post_word_load();
wdenk [Tue, 15 Jul 2003 21:50:34 +0000 (21:50 +0000)]
Avoid unnecessary call to post_word_load();
make logbuf compile without POST

21 years agoAdapt log driver to latest POST changes (POST_SLOWTEST)
wdenk [Tue, 15 Jul 2003 21:08:26 +0000 (21:08 +0000)]
Adapt log driver to latest POST changes (POST_SLOWTEST)

21 years agoPatches by Kshitij, 04 Jul 2003
wdenk [Tue, 15 Jul 2003 20:04:06 +0000 (20:04 +0000)]
Patches by Kshitij, 04 Jul 2003
- added support for arm925t cpu core
- added support for TI OMAP 1510 Innovator Board

21 years ago* Patches by Martin Krause, 14 Jul 2003:
wdenk [Tue, 15 Jul 2003 07:45:49 +0000 (07:45 +0000)]
* Patches by Martin Krause, 14 Jul 2003:
  - add I2C support for s3c2400 systems (trab board)
  - (re-) add "ping" to command table

* Fix handling of "slow" POST routines

21 years ago* Patches by Yuli Barcohen, 13 Jul 2003:
wdenk [Mon, 14 Jul 2003 22:13:32 +0000 (22:13 +0000)]
* Patches by Yuli Barcohen, 13 Jul 2003:
  - Correct flash and JFFS2 support for MPC8260ADS
  - fix PVR values and clock generation for PowerQUICC II family
    (8270/8275/8280)

* Patch by Bernhard Kuhn, 08 Jul 2003:
  - add support for M68K targets

* Patch by Ken Chou, 3 Jul:
  - Fix PCI config table for A3000
  - Fix iobase for natsemi.c
    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)

* Allow to enable "slow" POST routines by key press on power-on
* Fix temperature dependend switching of LCD backlight on LWMON
* Tweak output format for LWMON

21 years ago- Patch by Stefan Roese, 11 Jul 2003
stroese [Fri, 11 Jul 2003 08:23:12 +0000 (08:23 +0000)]
- Patch by Stefan Roese, 11 Jul 2003

21 years ago- Fixed interrupt polarity.
stroese [Fri, 11 Jul 2003 08:20:33 +0000 (08:20 +0000)]
- Fixed interrupt polarity.

21 years ago- FPGA updated.
stroese [Fri, 11 Jul 2003 08:17:26 +0000 (08:17 +0000)]
- FPGA updated.

21 years ago- BSP command added.
stroese [Fri, 11 Jul 2003 08:14:14 +0000 (08:14 +0000)]
- BSP command added.

21 years ago- AR405 config updated.
stroese [Fri, 11 Jul 2003 08:13:25 +0000 (08:13 +0000)]
- AR405 config updated.

21 years ago- Fix bug in CONFIG_VERSION_VARIABLE.
stroese [Fri, 11 Jul 2003 08:00:33 +0000 (08:00 +0000)]
- Fix bug in CONFIG_VERSION_VARIABLE.

21 years ago* Add support for NSCU board U-Boot-0_4_2
wdenk [Mon, 7 Jul 2003 20:07:54 +0000 (20:07 +0000)]
* Add support for NSCU board

* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules

* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
  mirror bit flash on TQM8xxM modules

21 years agoPatch by Kenneth Johansson, 30 Jun 2003:
wdenk [Tue, 1 Jul 2003 21:06:45 +0000 (21:06 +0000)]
Patch by Kenneth Johansson, 30 Jun 2003:
get rid of MK_CMD_ENTRY macro; update doc/README.command