arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd

Enable the two SAR sensors of the CRD based on herobrine.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415172238.1.I671bdf40fdfce7a35f6349fca0dc56145d4210ee@changeid

arm64: dts: qcom: sm8250: camss: Add CCI definitions

sm8250 has two CCI busses with two I2C busses apiece.

Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415164655.1679628-4-bryan.odonoghue@linaro.org

arm64: dts: qcom: sm8250: camss: Add CAMSS block definition

Adds a CAMSS definition block.

Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415164655.1679628-3-bryan.odonoghue@linaro.org

arm64: dts: qcom: sm8250: Add camcc DT node

Add the camcc DT node for the Camera Clock Controller on sm8250.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415164655.1679628-2-bryan.odonoghue@linaro.org

arm64: dts: qcom: sm8450-qrd: Enable spi and i2c nodes

Enable the i2c5, spi4, spi18 and spi19 nodes which were tested on qrd
board along with related qup nodes and gpi_dma0

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220414101630.1189052-8-vkoul@kernel.org

arm64: dts: qcom: sm8450: Fix missing iommus for qup1

qupv3_id_1 was missing iommus property which cause any dma transaction
to fail and board crash. So add the missing iommus.

Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220414101630.1189052-7-vkoul@kernel.org

arm64: dts: qcom: sm8450: Add qup nodes for qup2

qup2 has 7 SEs, so add the SEs (i2c and spi) along with pinconf for
these SEs

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220414101630.1189052-6-vkoul@kernel.org

arm64: dts: qcom: sm8450: Add qup nodes for qup1

qup1 has 7 SEs, I2C13 and I2C14 were already added so added the
remaining SEs (i2c and spi) along with pinconf for these SEs
Also add interconnect properties for I2C13 and I2C14

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220414101630.1189052-5-vkoul@kernel.org

arm64: dts: qcom: sm8450: Add qup nodes for qup0

qup0 has 7 SEs, with SE7 as uart and already added, so add the
remaining 6 SEs (i2c and spi) along with pinconf for these SEs

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220414101630.1189052-4-vkoul@kernel.org

arm64: dts: qcom: sm8450: Fix missing iommus for qup

qupv3_id_0 was missing iommus property which cause any dma transaction
to fail and board crash. So add the missing iommus.

While at it also add interconnect nodes for qup

Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220414101630.1189052-3-vkoul@kernel.org

arm64: dts: qcom: sm8450: Add gpi_dma nodes

GPI DMA can be used for DMA operations for QUP devices, so add the three
gpi_dma insances found in this SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220414101630.1189052-2-vkoul@kernel.org

arm64: dts: qcom: sm8350-hdk: Enable &gpi_dma1

Some versions of the firmware for the SM8350 Hardware Development Kit
(HDK) has FIFO mode disabled for i2c13 and must thus use GPI DMA. Enable
&gpi_dma1 to allow this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220412215137.2385831-3-bjorn.andersson@linaro.org

arm64: dts: qcom: sm8350: Add GENI I2C/SPI DMA channels

The GENI I2C and SPI controllers may use the GPI DMA engine, define the
rx and tx channels for these controllers to enable this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220412215137.2385831-2-bjorn.andersson@linaro.org

arm64: dts: qcom: sm8350: Define GPI DMA engines

The Qualcomm SM8350 has three GPI DMA engines, add definitions for
these.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220412215137.2385831-1-bjorn.andersson@linaro.org

arm64: dts: qcom: sc7280: Add wakeup-source property for USB node

Adding wakeup-source property for USB controller in SC7280.
This property is added to inform that the USB controller is
wake up capable and to conditionally power down the phy during
system suspend.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1649704614-31518-7-git-send-email-quic_c_sanm@quicinc.com

arm64: dts: qcom: msm8996: override nodes by label

Using node paths to extend or override a device tree node is error
prone.  If there was a typo error, a new node will be created instead of
extending the existing node.  This will lead to run-time errors that
could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).  This also reduces the indentation making the code
easier to read.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220402192859.154977-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8994: override nodes by label

Using node paths to extend or override a device tree node is error
prone.  If there was a typo error, a new node will be created instead of
extending the existing node.  This will lead to run-time errors that
could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).  This also reduces the indentation making the code
easier to read.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220402192859.154977-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom wled backlight and link to panel

Xiaomi Poco F1 uses the QCOM WLED driver for backlight control.
Enable and link it to the panel to use it.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/BY5PR02MB70092607CD7CDD8CF8BCD464D9E09@BY5PR02MB7009.namprd02.prod.outlook.com

arm64: dts: qcom: sdm845-xiaomi-beryllium: enable second wifi channel

Like the c630, the Poco F1 is also capable of using both antenna
channels for 2.4 and 5ghz wifi, however unlike the c630 only the first
channel is used for bluetooth. Similar to Oneplus 6.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/BY5PR02MB7009E2566F9000F338432761D91F9@BY5PR02MB7009.namprd02.prod.outlook.com

arm64: dts: qcom: sdm845-xiaomi-beryllium: fix typo in panel's vddio-supply property

vddio is misspelled with a "0" instead of "o". Fix it.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/BY5PR02MB7009901651E6A8D5ACB0425ED91F9@BY5PR02MB7009.namprd02.prod.outlook.com

arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom ipa driver

Enable Qualcomm IP Accelerator (IPA) driver for mobile data functionality
which works by using ModemManager.

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/BY5PR02MB7009405D7C06C0B480974063D91F9@BY5PR02MB7009.namprd02.prod.outlook.com

arm64: dts: qcom: sdm845-xiaomi-beryllium: change firmware path and use mbn format

The "qcom/sdm845/" path conflicts with db845c's firmware that are
present in the linux-firmware package. Xiaomi uses their own signed
firmware for Poco F1 and can't use the db845c's firmware. So let's
use "qcom/sdm845/beryllium/" to distinguish Poco F1's firmware files.

For easier handling and packaging, the mdt+bXX files are squashed
using Bjorn Andersson's pil-squasher tool from this link:
https://github.com/andersson/pil-squasher

Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/BY5PR02MB700966DEE6F6044EBEB5B892D91F9@BY5PR02MB7009.namprd02.prod.outlook.com

arm64: dts: qcom: do not use underscore in BCM node name

Align BCM voter node with DT schema by using hyphen instead of
underscore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411085935.130072-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8450: Add thermal zones

Add thermal zones handled by tsens sensors. The definitions and the trip
points were taken from the downstream dts. For the CPU core thermal
sensors, the trip points were changed to follow the example of other
Qualcomm platforms.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410234458.1739279-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450: Add thermal sensor controllers

The change adds description of two thermal sensor controllers found
on SM8450.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410234458.1739279-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: msm8998: reserve potentially inaccessible clocks

With the gcc driver now being more complete and describing clocks which
might not always be write-accessible to the OS, conservatively specify
all such clocks as protected in the SoC dts.
The board dts - or even user-supplied dts - can override this property
to reflect the actual configuration.

Signed-off-by: Michael Srba <michael.srba@seznam.cz>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-6-michael.srba@seznam.cz

Merge branch '20220411072156.24451-2-michael.srba@seznam.cz' into arm64-for-5.19

dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks

Add definitions of four clocks which need to be manipulated in order to
initialize the AHB bus which exposes the SCC block in the global address
space.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-2-michael.srba@seznam.cz

arm64: dts: qcom: add RPM clock controller fallback compatible

The bindings require a fallback compatible to RPM clock controller.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401201035.189106-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8994: remove SMD qcom,local-pid property

The Qualcomm SMD does not use qcom,local-pid property.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401201035.189106-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8953: do not use underscore in node name

Align RPM requests node with DT schema by using hyphen instead of
underscore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401201035.189106-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm7225-fairphone-fp4: Enable wifi

Configure regulators used by the wifi hardware and enable it.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220325101841.172304-2-luca.weiss@fairphone.com

arm64: dts: qcom: sm6350: Add wifi node

Add a node describing the wifi hardware found on sm6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220325101841.172304-1-luca.weiss@fairphone.com

arm64: dts: qcom: msm8994: Add mmc aliases

Set the aliases for both SDHCI controllers.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-16-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994: Add watchdog timer node

Add and configure the watchdog node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-15-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994: Fix BLSP[12]_DMA channels count

MSM8994 actually features 24 DMA channels for each BLSP,
fix it!

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-14-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994: Add OCMEM node

Add OCMEM node to allow for GPU SRAM access.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-13-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994-kitakami: Update regulator configuration

Remove regulator-always-on property where not necessary and mark regulators
that are not supposed to be voted active on boot with regulator-boot-on.
While at it, reorder the load properties to make it look more decent.

Reorder PMICs to fix a probe defer caused by messy dependencies and Linux's
inability to handle them (at least for now).

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-12-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994-kitakami: Disable a mistakengly enabled I2C host

I2C4 turns out not to be used on Kitakami after all and it only blocks a
GPIO used by camera hardware.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-11-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8992-libra: Fix up the framebuffer

Make sure the necessary clocks are kept on after clk_cleanup (until MDSS
is properly handled by its own driver) and touch up the fb address to
prevent some weird shifting. It's still not perfect, but at least the
kernel log doesn't start a third deep into your screen..

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Folded in change of framebuffer base address, from Konrad]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-10-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994: Fix the cont_splash_mem address

The default memory map places cont_splash_mem at 3401000, which was
overlooked.. Fix it!

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-9-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8992: Use the correct MMCC compatible

Now that proper msm8992 support is in the driver, switch to
the new compatible.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-8-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8992: Use the correct GCC compatible

Now that proper msm8992 support is in the driver, switch to
the new compatible.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-7-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994: Add MMCC node

Describe the Multimedia Clock Controller block in the DT.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-6-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8992-libra: Remove superfluous status = "okay"

The framebuffer is already enabled by default.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-5-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8992-libra: Temporarily restrict CPU count to 1

The phone seems to randomly crash when more than 1 CPU is enabled, which
is probably related to lack of some driver.

Restrict the device to only use a single core until this is solved.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-4-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8992-libra: Add CPU regulators

Specify CPU regulator voltages for both VDD_APC rails.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-3-konrad.dybcio@somainline.org

arm64: dts: qcom: msm8994: Fix sleep clock name

The sleep clock name expected by GCC is actually "sleep" and not
"sleep_clk". Fix the clock-names value for it to make sure it is
provided.

Fixes: 9204da57cd65 ("arm64: dts: qcom: msm8994: Provide missing "xo_board" and "sleep_clk" to GCC")

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-2-konrad.dybcio@somainline.org

arm64: dts: qcom: sc7280: Support gpu speedbin

Add speedbin fuse and additional OPPs for gpu to support sc7280 SKUs.

Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226005021.v2.5.I4c2cb95f06f0c37038c80cc1ad20563fdf0618e2@changeid

arm64: dts: qcom: ipq8074: fix the sleep clock frequency

Sleep clock frequency should be 32768Hz. Lets fix it.

Cc: stable@vger.kernel.org
Fixes: 41dac73e243d ("arm64: dts: Add ipq8074 SoC and HK01 board support")
Link: https://lore.kernel.org/all/e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.org/
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1644581655-11568-1-git-send-email-quic_kathirav@quicinc.com

arm64: dts: qcom: sm8250: Drop flags for mdss irqs

The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-5-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sdm845: Drop flags for mdss irqs

The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 08c2a076d18f ("arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-4-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sdm660: Drop flags for mdss irqs

The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: ab290284398d ("arm64: dts: qcom: sdm660: Add required nodes for DSI1")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sdm630: Drop flags for mdss irqs

The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: b52555d590d1 ("arm64: dts: qcom: sdm630: Add MDSS nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: msm8996: Drop flags for mdss irqs

The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 12d540375736 ("arm64: dts: qcom: msm8996: Add DSI0 nodes")
Fixes: 3a4547c1fc2f ("arm64: qcom: msm8996.dtsi: Add Display nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-1-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450-hdk: add pcie nodes

Add device tree nodes for PCIe0/PCIe1 controllers and corresponding
PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-8-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450-qrd: enable PCIe0 host

Enable PCIe0 host on SM8450 QRD device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-7-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450-qrd: enable PCIe0 PHY device

Enable PCIe0 PHY on the SM8450 QRD device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-6-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450: add PCIe1 root device

Add device tree node for the second PCIe host found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-5-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450: add PCIe1 PHY node

Add device tree node for the second PCIe PHY device found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-4-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450: add PCIe0 RC device

Add device tree node for the first PCIe host found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450: add PCIe0 PHY node

Add device tree node for the first PCIe PHY device found on the Qualcomm
SM8450 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers

Add the low pass audio clock controller device nodes.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220202053207.14256-1-tdas@codeaurora.org

Merge branch '20220223172248.18877-1-tdas@codeaurora.org' into arm64-for-5.19

dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280

The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Also add clock ids for
LPASS core clocks and audio clock IDs for LPASS client to request for
the clocks.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220223172248.18877-1-tdas@codeaurora.org

arm64: dts: qcom: msm8996: User generic node name for DMA

Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410175056.79330-4-singh.kuldeep87k@gmail.com

arm64: dts: qcom: msm8916-huawei-g7: Add sound card

The huawei-g7 uses the msm8916-wcd-digital/analog audio codecs similar
to apq8016-sbc, so we can mostly copy paste it from there to make audio
work correctly. The main difference is the hphl-jack-type-normally-open
property, which is needed to avoid inverted audio jack detection.

Note that at least on my device the jack detection is not fully
reliable: sometimes headphones are detected as headsets (with
microphone). However, this is not a big problem for typical usage.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410195113.13646-3-stephan@gerhold.net

arm64: dts: qcom: msm8916-huawei-g7: Clarify installation instructions

The comment with installation instructions in the huawei-g7 device tree
is a bit misleading and does not describe the recommended installation
steps very well. The bootloader is actually not patched; to avoid all
trouble with the vendor bootloader it is easier to bypass it completely
by jumping to a custom bootloader (e.g. based on the open-source LK
released by Qualcomm).

To avoid confusion, simplify the comment to state only the problem
and then refer to the wiki article which contains detailed suggested
installation instructions. This will also make it easier to keep it
up to date with new developments in the future.

Fixes: 55056b229189 ("arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410195113.13646-2-stephan@gerhold.net

arm64: dts: qcom: sm8250-edo: Add dual CS35L41 amps

Add nodes for dual Cirrus Logic CS35L41 audio amps connected via I2C.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220222014806.22446-1-konrad.dybcio@somainline.org

arm64: dts: qcom: sc7280: Add reset entries for SDCC controllers

Add gcc hardware reset entries for eMMC and SD card.

Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1649759528-15125-3-git-send-email-quic_c_sbhanu@quicinc.com

arm64: dts: qcom: sc7280-herobrine: Audio codec wants 1.8V, not 1.62V

The L2C rail on herobrine boards is intended to go to the audio
codec. Let's override the 1.62V specified in the qcard.dtsi file to be
1.8V.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411141332.v2.1.I9f06fec63b978699fe62591fec9e5ac31bb3a69d@changeid

arm64: dts: qcom: ipq6018: Fix qmp usb3 phy node

Fix the following 'make dtbs_check' warning(s) by
using phy@ instead of lanes@ and by moving '#clock-cells' to
sub-node:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: ssphy@78000:
 'lane@78200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
[bjorn: s/clock-names/clock-cells/ per Shawn's feedback]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-7-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm8450: Fix qmp ufs phy node (use phy@ instead of lanes@)

Fix the 'make dtbs_check' warning:

arch/arm64/boot/dts/qcom/sm8450-qrd.dt.yaml: phy@1d87000:
 'lanes@1d87400' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-6-bhupesh.sharma@linaro.org

arm64: dts: qcom: sc7280: Fix qmp phy node (use phy@ instead of lanes@)

Fix the 'make dtbs_check' warning:

arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml: phy@1c0e000:
  'lanes@1c0e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-5-bhupesh.sharma@linaro.org

arm64: dts: qcom: msm8996-xiaomi: Drop max-microamp and vddp-ref-clk properties from QMP PHY

The following properties are not supported and causing dtbs_check
warnings.

    - vdda-phy-max-microamp
    - vdda-pll-max-microamp
    - vddp-ref-clk-max-microamp
    - vddp-ref-clk-always-on

arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml: phy@627000:
   'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp'
    do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Drop them from QMP PHY nodes for 'msm8996-xiaomi' dts.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-4-bhupesh.sharma@linaro.org

arm64: dts: qcom: msm8916: Add BAM-DMUX for WWAN network interfaces

The BAM Data Multiplexer provides access to the network data channels
of modems integrated into many older Qualcomm SoCs, including MSM8916.

Add the nodes for the BAM DMA engine and BAM-DMUX to enable using WWAN
on smartphones/tablets based on MSM8916. This should work out of the box
with open-source WWAN userspace such as ModemManager.

The nodes are disabled by default to avoid loading unnecessary drivers
on devices that cannot use BAM-DMUX (e.g. DragonBoard 410c). However,
strictly speaking the nodes could be enabled by default since both the
bam_dma and bam_dmux driver will simply do nothing if the modem does
not announce any BAM-DMUX channels.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228225400.146555-3-stephan@gerhold.net

arm64: dts: qcom: add pm8450 support

Add PM8450 PMIC device tree include file. It is going to be used by
SM8450-based devices.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-8-dmitry.baryshkov@linaro.org

arm64: dts: qcom: pmr735a: stop depending on thermal_zones label

Most of SoC device trees do not provide the thermal_zones label. Thus
stop depending on it and use the full path to the thermal zones nodes.

Fixes: 7a3544e5d4e8 ("arm64: dts: qcom: pmr735a: Add temp-alarm support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-6-dmitry.baryshkov@linaro.org

arm64: dts: qcom: pm8350c: stop depending on thermal_zones label

Most of SoC device trees do not provide the thermal_zones label. Thus
stop depending on it and use the full path to the thermal zones nodes.

Fixes: 3795fe7d497b ("arm64: dts: qcom: pm8350c: Add temp-alarm support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-5-dmitry.baryshkov@linaro.org

arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config

Add temp-alarm device tree node and a default configuration for the
corresponding thermal zone for this PMIC. Temperatures are based on
downstream values.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-4-dmitry.baryshkov@linaro.org

arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config

Add temp-alarm device tree node and a default configuration for the
corresponding thermal zone for this PMIC. Temperatures are based on
downstream values.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: pm8350: add temp sensor and thermal zone config

Add temp-alarm device tree node and a default configuration for the
corresponding thermal zone for this PMIC. Temperatures are based on
downstream values.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: ipq6018: Add mdio bus description

The IPQ60xx has the same MDIO bug block as IPQ4019. Add IO range and
clock resources description.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/ef01a79ccc6ef86dc3a10d0fa3331794d49e9859.1646031524.git.baruch@tkos.co.il

arm64: dts: qcom: msm8998-oneplus-common: Add NFC

The OnePlus 5/5T both have an NXP PN553 which is supported by the
nxp-nci-i2c driver in mainline. It detects/reads NFC tags using
"nfctool" and with the NearD test scripts data can also be written
to be received by another device.

Signed-off-by: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220225215642.3916-1-jami.kettunen@somainline.org

arm64: dts: qcom: sc7280: rename edp_out label to mdss_edp_out

Rename the edp_out label in the sc7280 platform to mdss_edp_out
so that the nodes related to mdss are all grouped together in
the board specific files.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1647452154-16361-2-git-send-email-quic_sbillaka@quicinc.com

arm64: dts: qcom: sa8155p-adp: Enable ethernet node

Enable the ethernet node, add the phy node and pinctrl for ethernet.

[bhsharma: Correct ethernet/rgmii related pinmuxs, specify multi-queues and
 plug in the PHY interrupt for WOL]

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220325163537.1579969-3-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm8150: add ethernet node

SM8150 SoC supports ethqos ethernet controller so add the node for it

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[bhsharma: Correct ethernet interrupt numbers and add power-domain]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220325163537.1579969-2-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm7225-fairphone-fp4: Enable UFS

Configure and enable the nodes for UFS that are used for internal
storage on FP4.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220321133318.99406-7-luca.weiss@fairphone.com

arm64: dts: qcom: sm6350: Add UFS nodes

Add the necessary nodes for UFS and its PHY.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220321133318.99406-6-luca.weiss@fairphone.com

arm64: dts: qcom: sdm845: correct dynamic power coefficients

Following sm8150/sm8250 update sdm845 capacity-dmips-mhz and
dynamic-power-coefficient based on the measurements [1], [2].

The energy model dynamic-power-coefficient values were calculated with
    DPC = µW / MHz / V^2
for each OPP, and averaged across all OPPs within each cluster for the
final coefficient. Voltages were obtained from the qcom-cpufreq-hw
driver that reads voltages from the OSM LUT programmed into the SoC.

Normalized DMIPS/MHz capacity scale values for each CPU were calculated
from CoreMarks/MHz (CoreMark iterations per second per MHz), which
serves the same purpose. For each CPU, the final capacity-dmips-mhz
value is the C/MHz value of its maximum frequency normalized to
SCHED_CAPACITY_SCALE (1024) for the fastest CPU in the system.

For more details on measurement process see the commit message for the
commit 6aabed5526ee ("arm64: dts: qcom: sm8250: Add CPU capacities and
energy model").

[1] https://github.com/kdrag0n/freqbench
[2] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main

Cc: Danny Lin <danny@kdrag0n.dev>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220315141104.730235-1-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8150: Add PDC as the interrupt parent for tlmm

Several wakeup gpios supported by the Top Level Mode Multiplexer (TLMM)
block on sm8150 can be used as interrupt sources and these interrupts
are routed to the PDC interrupt controller.

So, specify PDC as the interrupt parent for the TLMM block.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226184028.111566-5-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm8450: add fastrpc nodes

Add fastrpc device tree nodes for aDSP, cDSP and SLPI.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410205901.1672089-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sm8450-hdk: Enable remoteproc instances

Enable the audio, compute, sensor and modem remoteproc and specify
firmware path for these on the Qualcomm SM8450 HDK.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410205901.1672089-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: msm8996: remove snps,dw-pcie compatibles

On MSM8996 PCI controller bindings are not compatible with snps,dw-pcie
binding. The platform doesn't provide second (global) IRQ, it requires
additional glue code. To prevent it from probing against the dw-pcie
driver, remove corresponding compatible.

Fixes: ed965ef89227 ("arm64: dts: qcom: msm8996: add support to pcie")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411115808.1976500-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sdm845: remove snps,dw-pcie compatibles

On SDM845 PCI controller bindings are not compatible with snps,dw-pcie
binding. The platform doesn't provide second (global) IRQ, it requires
additional glue code. To prevent it from probing against the dw-pcie
driver, remove corresponding compatible.

Fixes: 5c538e09cb19 ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Fixes: 42ad231338c1 ("arm64: dts: qcom: sdm845: Add second PCIe PHY and controller")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411115808.1976500-1-dmitry.baryshkov@linaro.org

arm64: dts: qcom: apq8096-db820c: enable MSS node

APQ8096 provides a 'modem' with reduced functionality, mainly targeting
location services. Enable corresponding device tree node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220403193911.1393920-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: msm8996-xiaomi-*: Enable MSS and SLPI

Enable mss_pil and slpi_pil and set their firmware paths.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926190555.278589-6-y.oudjana@protonmail.com

arm64: dts: qcom: msm8996: Add MSS and SLPI

Add nodes for the MSS and SLPI remoteprocs.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926190555.278589-5-y.oudjana@protonmail.com

arm64: dts: qcom: msm8996: Unify smp2p naming

Rename smp2p-modem to smp2p-mpss, and make the subnode labels of smp2p_adsp
and smp2p_slpi follow the <name>_smp2p_<out/in> layout.
Also move smp2p_slpi_out above smp2p_slpi_in to make it match mpss and adsp
where master-kernel is the first subnode.

This patch brings no functional change.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926190555.278589-4-y.oudjana@protonmail.com

arm64: dts: qcom: msm8996: Revamp reserved memory

Fix a total overlap between zap_shader_region and slpi_region, and rename
all regions to match the naming convention in other Qualcomm SoC device trees.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926190555.278589-2-y.oudjana@protonmail.com