Mauro Carvalho Chehab [Sun, 15 Jan 2012 23:10:17 +0000 (21:10 -0200)]
utils/dvb/parse_string: Fix a wrong cut-and-paste
While here, cleanup the malloc's for the temp tables.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Gregor Jasny [Sat, 14 Jan 2012 16:09:36 +0000 (17:09 +0100)]
buildsystem: Convert to autotools buildsystem
Use autoreconf -vfi to bootstrap
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sat, 14 Jan 2012 14:49:13 +0000 (15:49 +0100)]
Fix spelling error in manpage
Gregor Jasny [Sat, 14 Jan 2012 14:43:56 +0000 (15:43 +0100)]
Disable fancy upsampling (needed for libjpeg >= 7)
Libv4lconvert expects to receive downsampled data. With
jpeglib 7 the default changed to TRUE. So we have to
explicitely request downsampled data after reading the
JPEG header.
Thanks to Guido Vollbeding for pointing this out.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 14:41:53 +0000 (12:41 -0200)]
dvbv5-scan: Remove spurious transponder duplication
There's an algorithm to remove duplicated frequencies.
However, due to the zigzag tuning, the same channel
or transponder might appear with two different values.
Improves the code to also handle such case, by estimating
the needed bandwidth for each channel, and considering
any frequency shift bellow bandwitdh/8 as belonging to
the same channel/transponder.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 14:11:45 +0000 (12:11 -0200)]
utils/libscan: read other pid's also for types 0x05 and 0x06
While here, fix a bug at the verbose printk, thanks for Stefan
to report it.
Reported-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 13:44:20 +0000 (11:44 -0200)]
usb/descriptors: Add ISO/IEC 13818-1:2007 descriptors
Add the descriptors found at ISO/IEC 13818-1:2007. Some of them
were also defined on ARIB/ABNT ISDB-T specs, so remove the
duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 11:59:06 +0000 (09:59 -0200)]
dvb: add proper support for AC-3 audio
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 03:13:38 +0000 (01:13 -0200)]
dvb: add support for read/writing the other el PID
Instead of just supporting audio and video, add support to write
the other PID's to the file, in a generic way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 02:22:58 +0000 (00:22 -0200)]
dvbv5-zap: Fix a few warnings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 23:28:00 +0000 (21:28 -0200)]
dvbv5-zap: Accepty any number of audio and video PID's
Instead of working with just one video and just one audio,
allows zapping to a service with 0 or more audio/video
pid's.
Currently, just one audio or video pid will be filtered.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 23:09:19 +0000 (21:09 -0200)]
utils/dvb/dvb-file: Allow adding new keys to the file
Don't be too pedantic: if a new key is added, the parser
should not die. Instead, silently ignores it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 22:52:51 +0000 (20:52 -0200)]
dvb/libscan: Fix a bug at service PID handling
Several DVB-C channels had video/audio PID missing, because
the PMT tables for them weren't handled.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 22:32:36 +0000 (20:32 -0200)]
dvbv5-scan: add a parameter to control the usage of other freqs
By default, dvbv5-scan will get other frequencies from the
DVB NIT tables and use them for scan. A new flag to disable
this behavior is now added, as it helps to test the tool
with DVB-C.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 22:27:19 +0000 (20:27 -0200)]
dvbv5-zap: use argp parser instead of getopt
argp is easier to use and provides a nicer/more standard
arguments parsing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 20:44:23 +0000 (18:44 -0200)]
dvbv5-scan: use argp parser instead of getopt
argp is easier to use and provides a nicer/more standard
arguments parsing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 19:21:53 +0000 (17:21 -0200)]
utils/descriptors: Be more verbose about table bad usage
When a descriptor is found at the wrong place, be more verbose
about what happened.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 15:51:43 +0000 (13:51 -0200)]
dvb/dvb-file: Don't require a service name for everything
If the service doesn't provide a name, use its number.
This prevents a segmentation fault that happens for some DVB-C
frequencies here.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 15:39:42 +0000 (13:39 -0200)]
dvbv5-scan: Add a logic to scan other transponders
If a new transponder/channel is found, add it to the scan table,
in order to process the remaining frequencies found.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 14:37:47 +0000 (12:37 -0200)]
dvb/descriptors: Unify the frequency add logic
Instead of copying different versions of the same logic for all
delivery system descriptors, unify into a common place, and
fix the realloc size.
While here, fix another case where the size of the data were
missing for realloc.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 13 Jan 2012 09:44:22 +0000 (10:44 +0100)]
v4l2-compliance: fix frequency tests
1) If you set a frequency that is out of range then the spec says that the
driver must map it to the closest valid frequency.
2) Assume that radio devices are either tuners or modulators but not both.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Fri, 13 Jan 2012 09:43:49 +0000 (10:43 +0100)]
qv4l2: fix segfault when there are no inputs or outputs.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Stefan Ringel [Wed, 11 Jan 2012 19:31:43 +0000 (20:31 +0100)]
dvbv5-scan: Fix parsing crash at extension descriptors
Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 11 Jan 2012 15:09:57 +0000 (13:09 -0200)]
utils/dvb/descriptors: Fix frequency parsers
DVB-T and frequency list are not stored in BCD, as reported by
Stefan.
Also, double-checked the other frequency descriptors and found
a few issues on them.
Thanks to Stefan for reporting it.
Reported-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 11 Jan 2012 14:57:59 +0000 (12:57 -0200)]
utils/dvb/descriptors: Move the parse logic to their functions
Instead of having there inside the big switch, move them into
their own functions.
This solves a problem when parsing the service name descriptors,
as it increments the buffer internally, causing troubles at the
decoder.
Thanks to Stefan for reporting it.
Reported-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 11 Jan 2012 14:28:14 +0000 (12:28 -0200)]
utils/dvb: Don't cause segmentation fault if fe was not found
This is a trivial fix: if it can't open the frontend, just
exit, instead of trying to use a NULL pointer ;)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 17:08:52 +0000 (15:08 -0200)]
utils/dvb: Fix ISDB-T mode parsing
The ARIB/ABNT specs for ISDB are not very clear about what modes
correspond to 2k, 4k, 8k, but the DVB specs state that:
ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K.
It is called 'mode' in the standard:
Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K
Other documents also indicate that. In a matter of fact, what
is there is:
Mode 1: 1405 carriers - 2k FFT
Mode 2: 2809 carriers - 4k FFT
Mode 3: 5617 carriers - 8k FFT
PS.: The dib8000 driver seems to have mode 1/mode 3 inverted.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 16:15:31 +0000 (14:15 -0200)]
dvbv5-scan: Fix get_frontend() option parser
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 14:03:22 +0000 (12:03 -0200)]
utils/dvb: store scanned values for DVB-T2
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 13:57:05 +0000 (11:57 -0200)]
utils/dvb: Add a parser for DVB-T2 extension descriptor
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 13:09:54 +0000 (11:09 -0200)]
utils/dvb: Allow filling the scan file with NIT network information
Instead of just keeping the same parameters (generally auto-detection
ones) for each service, allows overriding it with the detected
data at the NIT tables.
Also, add two options at dvbv5-scan to enable this feature, and
to enable calling get_frontend() inside the drivers, from where other
detected stuff may be read.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 11:58:07 +0000 (09:58 -0200)]
utils/dvb: Properly handle ISDB-T partial reception
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 11:48:01 +0000 (09:48 -0200)]
utils/dvb/dvbv5-scan: Avoid segmentation fault if no channels found
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 11:36:43 +0000 (09:36 -0200)]
utils/dvb: Rename pid_table::program_number to service_id
While some specs use program_number, it is actually the
service_id. So, change it, to avoid confusion.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Jan 2012 11:30:01 +0000 (09:30 -0200)]
utils/dvb: Improve ISDB-T headers parsing
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 23:04:50 +0000 (21:04 -0200)]
utils/dvb: Add frequency_list_descriptor to the parser
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 22:35:49 +0000 (20:35 -0200)]
utils/dvb/descriptors.c: add a parser for DVB-T
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 15:46:20 +0000 (13:46 -0200)]
utils/dvb/descriptors.c: add a parser for DVB-C Annex A
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 15:28:28 +0000 (13:28 -0200)]
utils/dvb/descriptors.c: Reorganize the descriptors
Reorganize the descriptors, in order to be easier for reading.
The currently unused ones were moved to a separate place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 15:19:04 +0000 (13:19 -0200)]
utils/dvb: Add a descriptor parser for DVB-S/DVB-S2 NIT
Add a descriptor parser for DVB-S/DVB-S2, satellite
descriptor, according with EN 300 468 v1.11.1.
Also, move the ISDB-T parser into a separate function, to
better organize the code.
For now, those descriptors are only informational. A latter
patch should use those fields inside dvb-file.c, in order
to fill the proper fields there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Sun, 8 Jan 2012 10:22:02 +0000 (11:22 +0100)]
qv4l2: Do a set_interval after s_fmt
s_fmt resets a device to its default interval, so if a specific
interval has been selected we should so a set_interval after a s_fmt to
make sure we actually get the specified interval.
Also don't enable the drop down if enum_interval returns a non discrete
interval, since we're not populating the drop down then.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Sat, 7 Jan 2012 11:10:18 +0000 (12:10 +0100)]
libv4l2: Never be lazy on s_fmt
Before this patch libv4l2 tries to avoid sending an "unnecessary" s_fmt to
the device. So if an app does a s_fmt with parameters which exactly match
what is already in place libv4l2 used to not send the s_fmt to the device.
This means however that if the device was set to a specific framerate
with a s_parm call, that it will stay at this framerate. Where as
normally a s_fmt resets the device to its default framerate.
This patch ensures that app which do a s_fmt always get the default
framerate by always forwarding the s_fmt to the device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 12:53:02 +0000 (10:53 -0200)]
utils/dvb/README: update it to reflect the last changes
Add an specific documentation for Satellite delivery systems,
and fix bad whitespacing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 12:30:14 +0000 (10:30 -0200)]
utils/dvb/dvb-file: add support for Satellite parameters
Store/retrieve satellite parameters: LNB, sat_number and DISEqC
wait time.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 12:15:47 +0000 (10:15 -0200)]
utils/dvb: add a parameter for increasing the DISEqC wait time
By default, it will wait for 15 ms. Using -W allows increasing
this time by the amount of specified milisseconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 12:09:14 +0000 (10:09 -0200)]
utils/dvb: add a parameter for setting the satellite number
This parameter is required, if DISEqC is needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 11:57:20 +0000 (09:57 -0200)]
utils/dvb/libsat: rewrite the DISEqC logic
The old logic was broken. Rewrite it, according with Eutelsat
specifications:
http://www.eutelsat.com/satellites/pdf/Diseqc/Reference%20docs/bus_spec.pdf
http://www.eutelsat.com/satellites/pdf/Diseqc/associated%20docs/applic_info_turner-receiver.pdf
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 10:02:00 +0000 (08:02 -0200)]
libsat: Improve LNBf output messages
Fix Dual/Single LO output;
Show bandstacking;
On bandstacking, show what LO is used for each band.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 09:49:44 +0000 (07:49 -0200)]
utils/dvb/libsat: Add DishPro LNBf
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 01:32:51 +0000 (23:32 -0200)]
utils/dvb: dvb-fe: Fix close method.
Also, be sure that satellite will disable power on LNBf at
cloe.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 8 Jan 2012 01:23:27 +0000 (23:23 -0200)]
utils/dvb: add a simple DISEqC code, based on szap
This code is inspired on dvb-apps szap DISEqC code. It is
likely not enough, but it should be easy to replace it by
something more complete when needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 22:47:24 +0000 (20:47 -0200)]
utils/dvb: Add support for setting the LNBf type
This is needed, in order for the tools to work with satellital
delivery systems.
Still needed to fill the DISEqC stuff.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 13:01:51 +0000 (11:01 -0200)]
utils/Makefile: Add DVB directory for compilation
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 13:00:48 +0000 (11:00 -0200)]
utils/dvb: add an install target
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 12:57:07 +0000 (10:57 -0200)]
utils/dvb: Fix a few warnings
dvb-format-convert.c: In function ‘main’:
dvb-format-convert.c:92:6: warning: unused variable ‘adapter’ [-Wunused-variable]
dvb-format-convert.c:58:23: warning: ‘delsys’ may be used uninitialized in this function [-Wuninitialized]
dvb-format-convert.c:91:57: note: ‘delsys’ was declared here
dvb-fe.c: In function ‘dvb_set_compat_delivery_system’:
dvb-fe.c:272:6: warning: unused variable ‘ncaps’ [-Wunused-variable]
dvb-fe.c:328:1: warning: control reaches end of non-void function [-Wreturn-type]
dvb-file.c: In function ‘read_dvb_file’:
dvb-file.c:365:4: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 12:04:34 +0000 (10:04 -0200)]
utils/dvb: Add a README file
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 11:05:41 +0000 (09:05 -0200)]
utils/dvb: don't be verbose about dvb-fe stuff
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 11:02:34 +0000 (09:02 -0200)]
utils/dvb: Add the service # to the vchannel
This avoids having duplicated vchannel numbers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 10:57:04 +0000 (08:57 -0200)]
utils/dvb: allow zapping via virtual channel number
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 10:56:40 +0000 (08:56 -0200)]
utils/dvb: read/write the virtual channel number
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 10:40:09 +0000 (08:40 -0200)]
utils/dvb: fill the virtual channel information
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 10:20:57 +0000 (08:20 -0200)]
utils/dvb: properly fill LCN
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 10:05:47 +0000 (08:05 -0200)]
utils/dvb: remove ptr argument
Instead of using a pointer argument, use an index counter. This way,
it is easier to add more descriptor parser code, and use the
index, in order to fill the structs at the right place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 09:53:14 +0000 (07:53 -0200)]
utils/dvb: Add some sanity check there
Avoid changing something at the wrong place
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 09:47:10 +0000 (07:47 -0200)]
utils/dvb: move the table type to the parse_descriptor function
This brings more flexibility for the code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 09:28:44 +0000 (07:28 -0200)]
utils/dvb: Add support for LCN descriptor
While this descriptor appears on several places, it took some
time to discover the format for it. Finally found it at:
http://mumudvb.braice.net/mumudrupal/sites/default/files/Specifiche_LCN.pdf
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 09:07:39 +0000 (07:07 -0200)]
utils/dvb: Add a few other descriptors
with the help of libdvbpsi, added a few other descriptors found at
some ISDB-T channels.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 7 Jan 2012 08:27:41 +0000 (06:27 -0200)]
utils/dvb: Add support for ISDB NIT most usual descriptors
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Jan 2012 22:18:11 +0000 (20:18 -0200)]
utils/dvb: Unknown descriptor should not be an error
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Jan 2012 22:16:49 +0000 (20:16 -0200)]
utils/dvb: Add support for detecting the virtual channel on ISDB-T
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Jan 2012 21:56:18 +0000 (19:56 -0200)]
utils/dvb: Add a description for the parsed descriptors
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Jan 2012 21:49:01 +0000 (19:49 -0200)]
utils/dvb: Fix descriptors parsing
The descriptors parsing were failing. Fix its logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 6 Jan 2012 20:57:14 +0000 (18:57 -0200)]
utils/dvb: Add ISDB-T specific descriptors, according with the specs
Add the descriptors according with ABNT NBR 15603-1:2007
(corrected 2008 version)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 5 Jan 2012 17:22:54 +0000 (15:22 -0200)]
utils/dvb: dvb tools: Set frontend on dvbv5-scan and dvbv5-zap
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 5 Jan 2012 13:07:09 +0000 (11:07 -0200)]
utils/dvb: add support for setting the frontend type
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 16:09:56 +0000 (14:09 -0200)]
utils/dvb: Add a file converter
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 14:27:01 +0000 (12:27 -0200)]
utils/dvb: Add support for the new format
Now, by default, it will use the new format. Old formats are still
supported, via passing some extra options to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 14:26:43 +0000 (12:26 -0200)]
utils/dvb: The comparation were inverted. fix it
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 13:12:05 +0000 (11:12 -0200)]
utils/dvb: improve error messages for store/retrieve
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 13:11:44 +0000 (11:11 -0200)]
utils/dvb: fix parser for new format
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 12:49:44 +0000 (10:49 -0200)]
utils/dvb: Store delivery system at the properties
This is needed when generating the channels file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 11:50:44 +0000 (09:50 -0200)]
utils/dvb: Fix PID parsing on PAT table
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 11:43:41 +0000 (09:43 -0200)]
utils/dvb: remove a debug printf
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 11:42:48 +0000 (09:42 -0200)]
utils/dvb: fix a few warnings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 11:37:38 +0000 (09:37 -0200)]
utils/dvb: add support for read the new format
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 4 Jan 2012 00:03:59 +0000 (22:03 -0200)]
utils/dvb: use standard "channels.conf" file
Instead of using ~/.tzap/channels.conf file, uses a standard
channels file, without the PID's. Also, pass it as a parameter,
just like dvb-apps "scan" tool.
After this patch, the tool is working fine for ISDB-T. It
will likely work fine also for DVB-T.
Additional changes are required for DVB-C, in order to proccess
the NIT/SDT tables there, and for DVB-S, due to satellite
specifics.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 23:50:37 +0000 (21:50 -0200)]
utils/dvb: fix scan print
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 23:46:52 +0000 (21:46 -0200)]
utils/dvb: Wait for carrier before scanning for tables
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 20:53:29 +0000 (18:53 -0200)]
utils/dvb: Add some messages during scan
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 20:41:18 +0000 (18:41 -0200)]
utils/dvb: comment debug prints
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 20:28:48 +0000 (18:28 -0200)]
utils/dvb: Make it scan all channels
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 19:54:51 +0000 (17:54 -0200)]
utils/dvb: add a method for freeing dvb_description struct
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 19:39:06 +0000 (17:39 -0200)]
utils/dvb: write channels into the file
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 18:04:50 +0000 (16:04 -0200)]
utils/dvb: Add support for multiple audio and video pid's per service ID
While the existing formats allow only one audio/video PID,
the new format is flexible enough to allow more than one.
So, allow it!
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 17:33:42 +0000 (15:33 -0200)]
utils/dvb: Add a parser for the NIT table
Also, comment the NIT other and SDT other, as they're not visible
here. An additional logic may be needed, in order to know if
those things are needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 16:04:48 +0000 (14:04 -0200)]
utils/dvb: parse also the PMT descriptors
There's no usage for them on a scan tool. Yet, send them to the
parser. This way, if ever needed, they could also be properly
parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 15:30:07 +0000 (13:30 -0200)]
utils/dvb: add support for transport descriptors
As this is tested with an ISDB-T channel, the only descriptor
found there is 0x41 (service_list_descriptor). This has no meaning
for a dvb-scan tool, so don't implement it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 14:55:04 +0000 (12:55 -0200)]
utils/dvb: Add a parser for descriptors
The descriptors use EN 300 468 annex A for encoding strings.
Import the parser I wrote for it from dvb-utils scan.c, and add
the descriptors described at ETSI EN 300 468 V1.11.1 (2010-04).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 12:00:39 +0000 (10:00 -0200)]
utils/dvb: Code cleanup
Improve debug messages, remove some code duplication.
Also prepare for NIT and SDT parsers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 3 Jan 2012 11:37:18 +0000 (09:37 -0200)]
utils/dvb: Add a poll logic to avoid waiting forever for a pid
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>