NFSv4.2: Fix READ_PLUS smatch warnings

[ Upstream commit bb05a617f06b7a882e19c4f475b8e37f14d9ceac ]

Smatch reports:
  fs/nfs/nfs42xdr.c:1131 decode_read_plus() warn: missing error code? 'status'

Which Dan suggests to fix by doing a hardcoded "return 0" from the
"if (segments == 0)" check.

Additionally, smatch reports that the "status = -EIO" assignment is not
used. This patch addresses both these issues.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305222209.6l5VM2lL-lkp@intel.com/
Fixes: d3b00a802c845 ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Rework scratch handling for READ_PLUS

[ Upstream commit fbd2a05f29a95d5b42b294bf47e55a711424965b ]

Instead of using a tiny, static scratch buffer, we should use a kmalloc()-ed
buffer that is allocated when checking for read plus usage. This lets us
use the buffer before decoding any part of the READ_PLUS operation
instead of setting it right before segment decoding, meaning it should
be a little more robust.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: bb05a617f06b ("NFSv4.2: Fix READ_PLUS smatch warnings")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: Use RMW accessors for changing LNKCTL

[ Upstream commit f139492a09f15254fa261245cdbd65555cdf39e3 ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.

Use RMW capability accessors which does proper locking to avoid losing
concurrent updates to the register value. On restore, clear the ASPMC field
properly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 76d870ed09ab ("ath10k: enable ASPM")
Link: https://lore.kernel.org/r/20230717120503.15276-11-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: Use RMW accessors for changing LNKCTL

[ Upstream commit 6c1b6bdb34aaf8f94f65a9cae1d63490320c11bc ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value. On restore, clear the ASPMC field
properly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: e9603f4bdcc0 ("ath11k: pci: disable ASPM L0sLs before downloading firmware")
Link: https://lore.kernel.org/r/20230717120503.15276-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Use RMW accessors for changing LNKCTL

[ Upstream commit 30de872537bda526664d7a20b646adfb3e7ce6e6 ]

Don't assume that only the driver would be accessing LNKCTL of the upstream
bridge. ASPM policy changes can trigger write to LNKCTL outside of driver's
control.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event")
Link: https://lore.kernel.org/r/20230717120503.15276-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Use RMW accessors for changing LNKCTL

[ Upstream commit 7189576e8a829130192b33c5b64e8a475369c776 ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.  And in
the case of upstream bridge, the driver does not even own the device it's
changing the registers for.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 8a7cd27679d0 ("drm/radeon/cik: add support for pcie gen1/2/3 switching")
Fixes: b9d305dfb66c ("drm/radeon: implement pcie gen2/3 support for SI")
Link: https://lore.kernel.org/r/20230717120503.15276-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Use RMW accessors for changing LNKCTL

[ Upstream commit ce7d88110b9ed5f33fe79ea6d4ed049fb0e57bce ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.  And in
the case of upstream bridge, the driver does not even own the device it's
changing the registers for.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts")
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Link: https://lore.kernel.org/r/20230717120503.15276-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Convert fsl_emb notifier to state machine callbacks

[ Upstream commit 34daf445f82bd3a4df852bb5f1dffd792ac830a0 ]

  CC      arch/powerpc/perf/core-fsl-emb.o
arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes]
  675 | void hw_perf_event_setup(int cpu)
      |      ^~~~~~~~~~~~~~~~~~~

Looks like fsl_emb was completely missed by commit 3f6da3905398 ("perf:
Rework and fix the arch CPU-hotplug hooks")

So, apply same changes as commit 3f6da3905398 ("perf: Rework and fix
the arch CPU-hotplug hooks") then commit 57ecde42cc74 ("powerpc/perf:
Convert book3s notifier to state machine callbacks")

While at it, also fix following error:

arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt':
arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable]
  648 |         int found = 0;
      |             ^~~~~

Fixes: 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fadump: reset dump area size if fadump memory reserve fails

[ Upstream commit d1eb75e0dfed80d2d85b664e28a39f65b290ab55 ]

In case fadump_reserve_mem() fails to reserve memory, the
reserve_dump_area_size variable will retain the reserve area size. This
will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect
memory reserved by fadump.

To fix this problem, reserve dump area size variable is set to 0 if fadump
failed to reserve memory.

Fixes: 8255da95e545 ("powerpc/fadump: release all the memory above boot memory size")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230704050715.203581-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvdimm: Fix dereference after free in register_nvdimm_pmu()

[ Upstream commit 08ca6906a4b7e48f8e93b7c1f49a742a415be6d5 ]

'nd_pmu->pmu.attr_groups' is dereferenced in function
'nvdimm_pmu_free_hotplug_memory' call after it has been freed. Because in
function 'nvdimm_pmu_free_hotplug_memory' memory pointed by the fields of
'nd_pmu->pmu.attr_groups' is deallocated it is necessary to call 'kfree'
after 'nvdimm_pmu_free_hotplug_memory'.

Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230817114103.754977-1-konstantin.meskhidze@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()

[ Upstream commit 85ae42c72142346645e63c33835da947dfa008b3 ]

Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'.

Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230817115945.771826-1-konstantin.meskhidze@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/type1: fix cap_migration information leak

[ Upstream commit cd24e2a60af633f157d7e59c0a6dba64f131c0b1 ]

Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.

The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:

  struct vfio_iommu_type1_info_cap_migration {
          struct vfio_info_cap_header header;              /*     0     8 */
          __u32                      flags;                /*     8     4 */

          /* XXX 4 bytes hole, try to pack */

          __u64                      pgsize_bitmap;        /*    16     8 */
          __u64                      max_dirty_bitmap_size; /*    24     8 */

          /* size: 32, cachelines: 1, members: 4 */
          /* sum members: 28, holes: 1, sum holes: 4 */
          /* last cacheline: 32 bytes */
  };

The cap_mig variable is filled in without initializing the hole:

  static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
                         struct vfio_info_cap *caps)
  {
      struct vfio_iommu_type1_info_cap_migration cap_mig;

      cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
      cap_mig.header.version = 1;

      cap_mig.flags = 0;
      /* support minimum pgsize */
      cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
      cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;

      return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
  }

The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:

  int vfio_info_add_capability(struct vfio_info_cap *caps,
                   struct vfio_info_cap_header *cap, size_t size)
  {
      struct vfio_info_cap_header *header;

      header = vfio_info_cap_add(caps, size, cap->id, cap->version);
      if (IS_ERR(header))
          return PTR_ERR(header);

      memcpy(header + 1, cap + 1, size - sizeof(*header));

      return 0;
  }

This issue was found by code inspection.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fixes: ad721705d09c ("vfio iommu: Add migration capability to report supported features")
Link: https://lore.kernel.org/r/20230801155352.1391945-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/radix: Move some functions into #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

[ Upstream commit 4a9dd8f292efd614f0a18452e6474fe19ae17b47 ]

With skiboot_defconfig, Clang reports:

  CC      arch/powerpc/mm/book3s64/radix_tlb.o
arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
                   ^
arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end,
                   ^

This is because those functions are only called from functions
enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

Move below functions inside that #ifdef
* __tlbie_pid_lpid(unsigned long pid,
* __tlbie_va_lpid(unsigned long va, unsigned long pid,
* fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid)
* _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
* fixup_tlbie_va_range_lpid(unsigned long va,
* __tlbie_va_range_lpid(unsigned long start, unsigned long end,
* _tlbie_va_range_lpid(unsigned long start, unsigned long end,

Fixes: f0c6fbbb9050 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260802.Mjr99P5O-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op

[ Upstream commit 4dd432d985ef258e3bc436e568fba4b987b59171 ]

Reconfiguring the clock divider to the exact same value is observed
on an i.MX8MN to often cause a longer than usual clock pause, probably
because the divider restarts counting whenever the register is rewritten.

This issue doesn't show up normally, because the clock framework will
take care to not call set_rate when the clock rate is the same.
However, when we reconfigure an upstream clock, the common code will
call set_rate with the newly calculated rate on all children, e.g.:

  - sai5 is running normally and divides Audio PLL out by 16.
  - Audio PLL rate is increased by 32Hz (glitch-free kdiv change)
  - rates for children are recalculated and rates are set recursively
  - imx8m_clk_composite_divider_set_rate(sai5) is called with
    32/16 = 2Hz more
  - imx8m_clk_composite_divider_set_rate computes same divider as before
  - divider register is written, so it restarts counting from zero and
    MCLK is briefly paused, so instead of e.g. 40ns, MCLK is low for 120ns.

Some external clock consumers can be upset by such unexpected clock pauses,
so let's make sure we only rewrite the divider value when the value to be
written is actually different.

Fixes: d3ff9728134e ("clk: imx: Add imx composite clock")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230807082201.2332746-1-a.fatoum@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mp: fix sai4 clock

[ Upstream commit c30f600f1f41dcf5ef0fb02e9a201f9b2e8f31bd ]

The reference manual don't mention a SAI4 hardware block. This would be
clock slice 78 which is skipped (TRM, page 237). Remove any reference to
this clock to align the driver with the reality.

Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20230731142150.3186650-1-m.felsch@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8ulp: update SPLL2 type

[ Upstream commit 7653a59be8af043adc4c09473975a860e6055ff9 ]

The SPLL2 on iMX8ULP is different with other frac PLLs, it can
support VCO from 650Mhz to 1Ghz. Following the changes to pllv4,
use the new type IMX_PLLV4_IMX8ULP_1GHZ.

Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230625123340.4067536-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: pllv4: Fix SPLL2 MULT range

[ Upstream commit 3f0cdb945471f1abd1cf4d172190e9c489c5052a ]

The SPLL2 on iMX8ULP is different with other frac PLLs, it can
support VCO from 650Mhz to 1Ghz. According to RM, the MULT is
using a range from 27 to 54, not some fixed values. If using
current PLL implementation, some clock rate can't be supported.

Fix the issue by adding new type for the SPLL2 and use MULT range
to replace MULT table

Fixes: 5f0601c47c33 ("clk: imx: Update the pllv4 to support imx8ulp")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230625123340.4067536-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs

[ Upstream commit a27ac3806b0a0e6954fb5967223b8635242e5b8f ]

Use the floor ops to prevent warnings like this at suspend exit and boot:

mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz

Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Use RMW accessors for changing LNKCTL

[ Upstream commit e09060b3b6b4661278ff8e1b7b81a37d5ea86eae ]

Don't assume that the device is fully under the control of ASPM and use RMW
capability accessors which do proper locking to avoid losing concurrent
updates to the register values.

If configuration fails in pcie_aspm_configure_common_clock(), the
function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store
only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather
than the content of the whole LNKCTL registers. It aligns better with
how pcie_lnkctl_clear_and_set() expects its parameter and makes the
code more obvious to understand.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 2a42d9dba784 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch")
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: pciehp: Use RMW accessors for changing LNKCTL

[ Upstream commit 5f75f96c61039151c193775d776fde42477eace1 ]

As hotplug is not the only driver touching LNKCTL, use the RMW capability
accessor which handles concurrent changes correctly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7f822999e12a ("PCI: pciehp: Add Disable/enable link functions")
Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add locking to RMW PCI Express Capability Register accessors

[ Upstream commit 5e70d0acf0825f439079736080350371f8d6699a ]

Many places in the kernel write the Link Control and Root Control PCI
Express Capability Registers without proper concurrency control and this
could result in losing the changes one of the writers intended to make.

Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect
bit changes made in the RMW capability accessors. Protect only a selected
set of registers by differentiating the RMW accessor internally to
locked/unlocked variants using a wrapper which has the same signature as
pcie_capability_clear_and_set_word(). As the Capability Register (pos)
given to the wrapper is always a constant, the compiler should be able to
simplify all the dead-code away.

So far only the Link Control Register (ASPM, hotplug, link retraining,
various drivers) and the Root Control Register (AER & PME) seem to
require RMW locking.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver")
Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors")
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM")
Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC")
Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL")
Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261")
Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG")
Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function")
Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination")
Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space")
Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving")
Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260")
Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors")
Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ")
Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver")
Fixes: e6de30d63eb1 ("r8169: more 8168dp support.")
Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata")
Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants")
Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue")
Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time")
Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default")
Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Allow drivers to request exclusive config regions

[ Upstream commit 278294798ac9118412c9624a801d3f20f2279363 ]

PCI config space access from user space has traditionally been
unrestricted with writes being an understood risk for device operation.

Unfortunately, device breakage or odd behavior from config writes lacks
indicators that can leave driver writers confused when evaluating
failures.  This is especially true with the new PCIe Data Object
Exchange (DOE) mailbox protocol where backdoor shenanigans from user
space through things such as vendor defined protocols may affect device
operation without complete breakage.

A prior proposal restricted read and writes completely.[1]  Greg and
Bjorn pointed out that proposal is flawed for a couple of reasons.
First, lspci should always be allowed and should not interfere with any
device operation.  Second, setpci is a valuable tool that is sometimes
necessary and it should not be completely restricted.[2]  Finally
methods exist for full lock of device access if required.

Even though access should not be restricted it would be nice for driver
writers to be able to flag critical parts of the config space such that
interference from user space can be detected.

Introduce pci_request_config_region_exclusive() to mark exclusive config
regions.  Such regions trigger a warning and kernel taint if accessed
via user space.

Create pci_warn_once() to restrict the user from spamming the log.

[1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/
[2] https://lore.kernel.org/all/YF8NGeGv9vYcMfTV@kroah.com/

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220926215711.2893286-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5e70d0acf082 ("PCI: Add locking to RMW PCI Express Capability Register accessors")
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mcp23s08: check return value of devm_kasprintf()

[ Upstream commit f941714a7c7698eadb59bc27d34d6d6f38982705 ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 0f04a81784fe ("pinctrl: mcp23s08: Split to three parts: core, I²C, SPI")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621100409.1608395-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Mark NVIDIA T4 GPUs to avoid bus reset

[ Upstream commit d5af729dc2071273f14cbb94abbc60608142fd83 ]

NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card
is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs
PCI_DEV_FLAGS_NO_BUS_RESET.

Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset")
Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: microchip: Correct the DED and SEC interrupt bit offsets

[ Upstream commit 6d473a5a26136edf55c435a1c433e52910e03926 ]

The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.

Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_src

[ Upstream commit df04d166d1f346dbf740bbea64a3bed3e7f14c8d ]

GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230804-sm6350-sdcc2-v1-1-3d946927d37d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: reset: Use the correct type of sleep/delay based on length

[ Upstream commit 181b66ee7cdd824797fc99b53bec29cf5630a04f ]

Use the fsleep() helper that (based on the length of the delay, see: [1])
chooses the correct sleep/delay functions.

[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt

Fixes: 2cb8a39b6781 ("clk: qcom: reset: Allow specifying custom reset delay")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-qcom_reset-v3-1-5958facd5db2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()

[ Upstream commit 9e0f4f2918c2ff145d3dedee862d9919a6ed5812 ]

kvm_vfio_group_add() creates kvg instance, links it to kv->group_list,
and calls kvm_vfio_file_set_kvm() with kvg->file as an argument after
dropping kv->lock. If we race group addition and deletion calls, kvg
instance may get freed by the time we get around to calling
kvm_vfio_file_set_kvm().

Previous iterations of the code did not reference kvg->file outside of
the critical section, but used a temporary variable. Still, they had
similar problem of the file reference being owned by kvg structure and
potential for kvm_vfio_group_del() dropping it before
kvm_vfio_group_add() had a chance to complete.

Fix this by moving call to kvm_vfio_file_set_kvm() under the protection
of kv->lock. We already call it while holding the same lock when vfio
group is being deleted, so it should be safe here as well.

Fixes: 2fc1bec15883 ("kvm: set/clear kvm to/from vfio_group when group add/delete")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230714224538.404793-1-dmitry.torokhov@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm/vfio: Prepare for accepting vfio device fd

[ Upstream commit 2f99073a722beef5f74f3b0f32bda227ba3df1e0 ]

This renames kvm_vfio_group related helpers to prepare for accepting
vfio device fd. No functional change is intended.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-5-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Stable-dep-of: 9e0f4f2918c2 ("kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8250: Fix gcc_sdcc2_apps_clk_src

[ Upstream commit 783cb693828ce487cf0bc6ad16cbcf2caae6f8d9 ]

GPLL9 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230802210359.408-1-patrick.whewell@sightlineapplications.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: avoid potential data overflow in next_linear_group

[ Upstream commit 60c672b7f2d1e5dd1774f2399b355c9314e709f8 ]

ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.

Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: correct grp validation in ext4_mb_good_group

[ Upstream commit a9ce5993a0f5c0887c8a1b4ffa3b8046fbcfdc93 ]

Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.

Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/igen6: Fix the issue of no error events

[ Upstream commit ce53ad81ed36c24aff075f94474adecfabfcf239 ]

Current igen6_edac checks for pending errors before the registration
of the error handler. However, there is a possibility that the error
occurs during the registration process, leading to unhandled pending
errors and no future error events. This issue can be reproduced by
repeatedly injecting errors during the loading of the igen6_edac.

Fix this issue by moving the pending error handler after the registration
of the error handler, ensuring that no pending errors are left unhandled.

Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: Ee Wey Lim <ee.wey.lim@intel.com>
Tested-by: Ee Wey Lim <ee.wey.lim@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230725080427.23883-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src

[ Upstream commit fd0b5ba87ad5709f0fd3d2bc4b7870494a75f96a ]

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230723190725.1619193-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: Modify mismatched function name

[ Upstream commit 075d9ca5b4e17f84fd1c744a405e69ec743be7f0 ]

No functional modification involved.

drivers/clk/sunxi-ng/ccu_mmc_timing.c:54: warning: expecting prototype for sunxi_ccu_set_mmc_timing_mode(). Prototype was for sunxi_ccu_get_mmc_timing_mode() instead

Fixes: f6f64ed868d3 ("clk: sunxi-ng: Add interface to query or configure MMC timing modes.")
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230722153107.2078179-1-chris.zjh@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/DOE: Fix destroy_work_on_stack() race

[ Upstream commit e3a3a097eaebaf234a482b4d2f9f18fe989208c1 ]

The following debug object splat was observed in testing:

  ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510
  WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0
  ...
  Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work
  RIP: 0010:debug_print_object+0x7d/0xb0
  ...
  Call Trace:
   ? debug_print_object+0x7d/0xb0
   ? __pfx_doe_statemachine_work+0x10/0x10
   debug_object_free.part.0+0x11b/0x150
   doe_statemachine_work+0x45e/0x510
   process_one_work+0x1d4/0x3c0

This occurs because destroy_work_on_stack() was called after signaling
the completion in the calling thread.  This creates a race between
destroy_work_on_stack() and the task->work struct going out of scope in
pci_doe().

Signal the work complete after destroying the work struct.  This is safe
because signal_task_complete() is the final thing the work item does and
the workqueue code is careful not to access the work struct after.

Fixes: abf04be0e707 ("PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y")
Link: https://lore.kernel.org/r/20230726-doe-fix-v1-1-af07e614d4dd@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()

[ Upstream commit a995c50db887ef97f3160775aef7d772635a6f6e ]

The function clk_register_pll() may return NULL or an ERR_PTR. Don't
treat an ERR_PTR as valid.

Signed-off-by: Minjie Du <duminjie@vivo.com>
Link: https://lore.kernel.org/r/20230712102246.10348-1-duminjie@vivo.com
Fixes: b9e0d40c0d83 ("clk: keystone: add Keystone PLL clock driver")
[sboyd@kernel.org: Reword commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom-ep: Switch MHI bus master clock off during L1SS

[ Upstream commit b9cbc06049cb6b7a322d708c2098195fb9fdcc4c ]

Currently, as part of the qcom_pcie_perst_deassert() function, instead
of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable
"val" is re-read.

This must be fixed to ensure that the master clock supplied to the MHI
bus is correctly gated during L1.1/L1.2 to save power.

Thus, replace the line that re-reads "val" with a line that writes the
updated value to the register to clear PARF_MSTR_AXI_CLK_EN.

[kwilczynski: commit log]
Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS")
Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org
Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: apple: Initialize pcie->nvecs before use

[ Upstream commit d8650c0c2aa2e413594e4cb0faafa9958c1d7782 ]

The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set
up the number of MSIs available for each port. However, it's called
before apple_msi_init(), which initializes pcie->nvecs.

Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such,
initialized as zero. ilog2(0) happens to be 0xffffffff which then simply
configures more MSIs in hardware than we have. This doesn't break
anything because we never hand out those vectors.

Thus, swap the order of the two calls so that the correctly initialized
value is then used.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev
Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz

[ Upstream commit dafebd0f9a4f56b10d7fbda0bff1f540d16a2ea4 ]

PLL rate on RK356x is calculated through the simple formula:
((24000000 / _refdiv) * _fbdiv) / (_postdiv1 * _postdiv2)

The PLL rate setting for 78.75MHz seems to be copied from 96MHz
so this patch fixes it and configures it properly.

Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Fixes: 842f4cb72639 ("clk: rockchip: Add more PLL rates for rk3568")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134750.1056293-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc8280xp: Add missing GDSCs

[ Upstream commit 4712eb7ff85bd3dd09c6668b8de4080e02b3eea9 ]

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-3-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs

[ Upstream commit 9eba4db02a88e7a810aabd70f7a6960f184f391f ]

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc8280xp: Add missing GDSC flags

[ Upstream commit 2fd02de27054576a4a8c89302e2f77122c55e957 ]

All of the 8280's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.

Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-1-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc8280xp: Add EMAC GDSCs

[ Upstream commit 32c2f2a46db1322caaf78d5ea747ed5c56d2e353 ]

Add the EMAC GDSCs to allow the EMAC hardware to be enabled.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230413191541.1073027-2-ahalaney@redhat.com
Stable-dep-of: 2fd02de27054 ("clk: qcom: gcc-sc8280xp: Add missing GDSC flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gpucc-sm6350: Fix clock source names

[ Upstream commit 743913b343a3ec2510fe3c0dfaff03d049659922 ]

fw_name for GCC inputs didn't match the bindings. Fix it.

Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-2-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gpucc-sm6350: Introduce index-based clk lookup

[ Upstream commit f6f89d194e4ddcfe197ac8a05ed4161f642a5c68 ]

Add the nowadays-prefered and marginally faster way of looking up parent
clocks in the device tree. It also allows for clock-names-independent
operation, so long as the order (which is enforced by schema) is kept.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-1-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 743913b343a3 ("clk: qcom: gpucc-sm6350: Fix clock source names")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Fix a memory leak when scanning for an adapter

[ Upstream commit b8d72e32e1453d37ee5c8a219f24e7eeadc471ef ]

The adapter scan ssif_info_find() sets info->adapter_name if the adapter
info came from SMBIOS, as it's not set in that case.  However, this
function can be called more than once, and it will leak the adapter name
if it had already been set.  So check for NULL before setting it.

Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface")
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Add check for kstrdup

[ Upstream commit c5586d0f711e9744d0cade39b0c4a2d116a333ca ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Message-Id: <20230619092802.35384-1-jiasheng@iscas.ac.cn>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ac97: Fix possible error value of *rac97

[ Upstream commit 67de40c9df94037769967ba28c7d951afb45b7fb ]

Before committing 79597c8bf64c, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.

For examble, in snd_vortex_mixer():
err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
vortex->isquad = ((vortex->codec == NULL) ?
0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.

Move the judgement order to be clearer and better.

Fixes: 79597c8bf64c ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: Fix overlay type in apply/revert check

[ Upstream commit 6becf8f845ae1f0b1cfed395bbeccbd23654162d ]

The removal check in of_unittest_apply_revert_overlay_check()
always uses the platform device overlay type, while it should use the
actual overlay type, as passed as a parameter to the function.

This has no impact on any current test, as all tests calling
of_unittest_apply_revert_overlay_check() use the platform device overlay
type.

Fixes: d5e75500ca401d31 ("of: unitest: Add I2C overlay unit tests.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ba0234c41ba808f10112094f88792beeb6dbaedf.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: overlay: Call of_changeset_init() early

[ Upstream commit a9515ff4fb142b690a0d2b58782b15903b990dba ]

When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state.

However, of_overlay_apply() calls of_resolve_phandles() before
init_overlay_changeset().  Hence if the overlay fails to apply due to an
unresolved symbol, the overlay_changeset.cset.entries list is still
uninitialized, and cleanup will crash with a NULL-pointer dereference in
overlay_removal_is_ok().

Fix this by moving the call to of_changeset_init() from
init_overlay_changeset() to of_overlay_fdt_apply(), where all other
early initialization is done.

Fixes: f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4f1d6d74b61cba2599026adb6d1948ae559ce91f.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: amd: clear dsp to host interrupt status

[ Upstream commit 38592ae6dc9f84b7a994c43de2136b8115ca30f6 ]

DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.

when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.

Fixes: 2e7c6652f9b8 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: raid0: account for split bio in iostat accounting

[ Upstream commit cc22b5407e9ca76adb7efeed843146510b1b72a5 ]

When a bio is split by md raid0, the newly created bio will not be tracked
by md for I/O accounting. Only the portion of I/O still assigned to the
original bio which was reduced by the split will be accounted for. This
results in md iostat data sometimes showing I/O values far below the actual
amount of data being sent through md.

md_account_bio() needs to be called for all bio generated by the bio split.

A simple example of the issue was generated using a raid0 device on partitions
to the same device. Since all raid0 I/O then goes to one device, it makes it
easy to see a gap between the md device and its sd storage. Reading an lvm
device on top of the md device, the iostat output (some 0 columns and extra
devices removed to make the data more compact) was:

Device             tps    kB_read/s    kB_wrtn/s    kB_dscd/s    kB_read
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0
md2            1364.00    411496.00         0.00         0.00     411496
sde            1734.00    646144.00         0.00         0.00     646144
md2            1699.00    510680.00         0.00         0.00     510680
sde            2155.00    802784.00         0.00         0.00     802784
md2             803.00    241480.00         0.00         0.00     241480
sde            1016.00    377888.00         0.00         0.00     377888
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0

I/O was generated doing large direct I/O reads (12M) with dd to a linear
lvm volume on top of the 4 leg raid0 device.

The md2 reads were showing as roughly 2/3 of the reads to the sde device
containing all of md2's raid partitions. The sum of reads to sde was
1826816 kB, which was the expected amount as it was the amount read by
dd. With the patch, the total reads from md will match the reads from
sde and be consistent with the amount of I/O generated.

Fixes: 10764815ff47 ("md: add io accounting for raid0 and raid5")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230816181433.13289-1-djeffery@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid0: Fix performance regression for large sequential writes

[ Upstream commit 319ff40a542736d67e5bce18635de35d0e7a0bff ]

Commit f00d7c85be9e ("md/raid0: fix up bio splitting.") among other
things changed how bio that needs to be split is submitted. Before this
commit, we have split the bio, mapped and submitted each part. After
this commit, we map only the first part of the split bio and submit the
second part unmapped. Due to bio sorting in __submit_bio_noacct() this
results in the following request ordering:

  9,0   18     1181     0.525037895 15995  Q  WS 1479315464 + 63392

  Split off chunk-sized (1024 sectors) request:

  9,0   18     1182     0.629019647 15995  X  WS 1479315464 / 1479316488

  Request is unaligned to the chunk so it's split in
  raid0_make_request().  This is the first part mapped and punted to
  bio_list:

  8,0   18     7053     0.629020455 15995  A  WS 739921928 + 1016 <- (9,0) 1479315464

  Now raid0_make_request() returns, second part is postponed on
  bio_list. __submit_bio_noacct() resorts the bio_list, mapped request
  is submitted to the underlying device:

  8,0   18     7054     0.629022782 15995  G  WS 739921928 + 1016

  Now we take another request from the bio_list which is the remainder
  of the original huge request. Split off another chunk-sized bit from
  it and the situation repeats:

  9,0   18     1183     0.629024499 15995  X  WS 1479316488 / 1479317512
  8,16  18     6998     0.629025110 15995  A  WS 739921928 + 1016 <- (9,0) 1479316488
  8,16  18     6999     0.629026728 15995  G  WS 739921928 + 1016
  ...
  9,0   18     1184     0.629032940 15995  X  WS 1479317512 / 1479318536 [libnetacq-write]
  8,0   18     7059     0.629033294 15995  A  WS 739922952 + 1016 <- (9,0) 1479317512
  8,0   18     7060     0.629033902 15995  G  WS 739922952 + 1016
  ...

  This repeats until we consume the whole original huge request. Now we
  finally get to processing the second parts of the split off requests
  (in reverse order):

  8,16  18     7181     0.629161384 15995  A  WS 739952640 + 8 <- (9,0) 1479377920
  8,0   18     7239     0.629162140 15995  A  WS 739952640 + 8 <- (9,0) 1479376896
  8,16  18     7186     0.629163881 15995  A  WS 739951616 + 8 <- (9,0) 1479375872
  8,0   18     7242     0.629164421 15995  A  WS 739951616 + 8 <- (9,0) 1479374848
  ...

I guess it is obvious that this IO pattern is extremely inefficient way
to perform sequential IO. It also makes bio_list to grow to rather long
lengths.

Change raid0_make_request() to map both parts of the split bio. Since we
know we are provided with at most chunk-sized bios, we will always need
to split the incoming bio at most once.

Fixes: f00d7c85be9e ("md/raid0: fix up bio splitting.")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-2-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid0: Factor out helper for mapping and submitting a bio

[ Upstream commit af50e20afb401cc203bd2a9ff62ece0ae4976103 ]

Factor out helper function for mapping and submitting a bio out of
raid0_make_request(). We will use it later for submitting both parts of
a split bio.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-1-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: add error_handlers for raid0 and linear

[ Upstream commit c31fea2f8e2a72c817f318016bbc327095175a9f ]

After the commit 9631abdbf406c("md: Set MD_BROKEN for RAID1 and RAID10")
MD_BROKEN must be set if array is failed because state_store() checks it.
If it is set then -EBUSY is returned to userspace.

For raid0 and linear MD_BROKEN is not set by error_handler(). As a result
mdadm is unable to trigger clean-up actions. It is a regression.

This patch adds appropriate error_handler for raid0 and linear. The
error handler sets MD_BROKEN for this device.

Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230306130317.3418-1-mariusz.tkaczyk@linux.intel.com
Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: cs_dsp: Fix new control name check

[ Upstream commit 7ac1102b227b36550452b663fd39ab1c09378a95 ]

Before adding a new FW control, its name is checked against
existing controls list. But the string length in strncmp used
to compare controls names is taken from the list, so if beginnings
of the controls are matching,  then the new control is not created.
For example, if CAL_R control already exists, CAL_R_SELECTED
is not created.
The fix is to compare string lengths as well.

Fixes: 6477960755fb ("ASoC: wm_adsp: Move check for control existence")
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815172908.3454056-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()

[ Upstream commit 0d0bd28c500173bfca78aa840f8f36d261ef1765 ]

r5l_flush_stripe_to_raid() will check if the list 'flushing_ios' is
empty, and then submit 'flush_bio', however, r5l_log_flush_endio()
is clearing the list first and then clear the bio, which will cause
null-ptr-deref:

T1: submit flush io
raid5d
 handle_active_stripes
  r5l_flush_stripe_to_raid
   // list is empty
   // add 'io_end_ios' to the list
   bio_init
   submit_bio
   // io1

T2: io1 is done
r5l_log_flush_endio
 list_splice_tail_init
 // clear the list
T3: submit new flush io
...
r5l_flush_stripe_to_raid
 // list is empty
 // add 'io_end_ios' to the list
 bio_init
 bio_uninit
 // clear bio->bi_blkg
 submit_bio
 // null-ptr-deref

Fix this problem by clearing bio before clearing the list in
r5l_log_flush_endio().

Fixes: 0dd00cba99c3 ("raid5-cache: fully initialize flush_bio when needed")
Reported-and-tested-by: Corey Hickey <bugfood-ml@fatooh.org>
Closes: https://lore.kernel.org/all/cddd7213-3dfd-4ab7-a3ac-edd54d74a626@fatooh.org/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid5-cache: fix a deadlock in r5l_exit_log()

[ Upstream commit a705b11b358dee677aad80630e7608b2d5f56691 ]

Commit b13015af94cf ("md/raid5-cache: Clear conf->log after finishing
work") introduce a new problem:

// caller hold reconfig_mutex
r5l_exit_log
 flush_work(&log->disable_writeback_work)
r5c_disable_writeback_async
 wait_event
  /*
   * conf->log is not NULL, and mddev_trylock()
   * will fail, wait_event() can never pass.
   */
 conf->log = NULL

Fix this problem by setting 'config->log' to NULL before wake_up() as it
used to be, so that wait_event() from r5c_disable_writeback_async() can
exist. In the meantime, move forward md_unregister_thread() so that
null-ptr-deref this commit fixed can still be fixed.

Fixes: b13015af94cf ("md/raid5-cache: Clear conf->log after finishing work")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230708091727.1417894-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix cast to enum warning

[ Upstream commit de44bf2f7683347f75690ef6cf61a1d5ba8f0891 ]

Fix warning for "cast to smaller integer type 'enum sysc_soc' from 'const
void *'".

Cc: Nishanth Menon <nm@ti.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308150723.ziuGCdM3-lkp@intel.com/
Fixes: e1e1e9bb9d94 ("bus: ti-sysc: Fix build warning for 64-bit build")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins

[ Upstream commit 7868ed0144b33903e16a50485775f669c109e41a ]

Pins 83-86 and 158-160 are NC, so there's no point in keeping them
reserved. Take care of that.

Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803-topic-x13s_pin-v1-1-fae792274e89@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Fix dsi1 interrupts

[ Upstream commit bd3b4ac11845b428996cfd2c7b8302ba6a07340d ]

Fix IRQ flags mismatch which was keeping dsi1 from probing by changing
interrupts = <4> to interrupts = <5>.

Fixes: 2752bb7d9b58 ("arm64: dts: qcom: msm8996: add second DSI interface")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Acked-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805130936.359860-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU

[ Upstream commit 7f828f3207142351750e9545527341425187de7b ]

The MMSS SMMU has its own power domain. Attach it so that we can drop
the "keep it always-on" hack.

Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-2-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Drop bus clock reference from MMSS SMMU

[ Upstream commit a3ce236364b82688ca4c7605f63c4efd68e9589c ]

The MMSS SMMU has been abusingly consuming the exposed RPM interconnect
clock. Drop it.

Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-1-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: apq8016-sbc: Fix ov5640 regulator supply names

[ Upstream commit 43a684580819e7f35b6cb38236be63c4cba26ef4 ]

The ov5640 driver expects DOVDD, AVDD and DVDD as regulator supply names.

The ov5640 has depended on these names since the driver was committed
upstream in 2017. Similarly apq8016-sbc.dtsi has had completely different
regulator names since its own initial commit in 2020.

Perhaps the regulators were left on in previous 410c bootloaders. In any
case today on 6.5 we won't switch on the ov5640 without correctly naming
the regulators.

Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Fix potential memory leak if vmap() fail

[ Upstream commit 379091e0f6d179d1a084c65de90fa44583b14a70 ]

Also return -ENOMEM if such a failure happens, the implement should take
responsibility for the error handling.

Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230706134000.130098-1-suijingfeng@loongson.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: ipq4019: correct SDHCI XO clock

[ Upstream commit b5ed7a5c1fdb3981713f7b637b72aa390c3db036 ]

Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct,
it seems that I somehow made a mistake of passing it instead of the fixed
XO clock.

Fixes: 04b3b72b5b8f ("ARM: dts: qcom: ipq4019: Add SDHCI controller node")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811110150.229966-1-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Remove freeing not dynamic allocated memory

[ Upstream commit 27b9e2ea3f2757da26bb8280e46f7fdbb1acb219 ]

Fixing the coverity issue of:
mtk_drm_cmdq_pkt_destroy frees address of mtk_crtc->cmdq_handle

So remove the free function.

Fixes: 7627122fd1c0 ("drm/mediatek: Add cmdq_handle in mtk_crtc")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix build warning for 64-bit build

[ Upstream commit e1e1e9bb9d943ec690670a609a5f660ca10eaf85 ]

Fix "warning: cast from pointer to integer of different size" on 64-bit
builds.

Note that this is a cosmetic fix at this point as the driver is not yet
used for 64-bit systems.

Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: dp: Add missing error checks in mtk_dp_parse_capabilities

[ Upstream commit cfc146137a9f12e883ba64bc496b6da4d23f26d5 ]

If reading the RX capabilities fails the training pattern will be set
wrongly: add error checking for drm_dp_read_dpcd_caps() and return if
anything went wrong with it.

While at it, also add a less critical error check when writing to
clear the ESI0 IRQ vector.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix drain stalls by invalid SQE

[ Upstream commit cfdbaa3a291d6fd2cb4a1a70d74e63b4abc2f5ec ]

cq_extra is protected by ->completion_lock, which io_get_sqe() misses.
The bug is harmless as it doesn't happen in real life, requires invalid
SQ index array and racing with submission, and only messes up the
userspace, i.e. stall requests execution but will be cleaned up on
ring destruction.

Fixes: 15641e427070f ("io_uring: don't cache number of dropped SQEs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66096d54651b1a60534bb2023f2947f09f50ef73.1691538547.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/mq-deadline: use correct way to throttling write requests

[ Upstream commit d47f9717e5cfd0dd8c0ba2ecfa47c38d140f1bb6 ]

The original formula was inaccurate:
dd->async_depth = max(1UL, 3 * q->nr_requests / 4);

For write requests, when we assign a tags from sched_tags,
data->shallow_depth will be passed to sbitmap_find_bit,
see the following code:

nr = sbitmap_find_bit_in_word(&sb->map[index],
min_t (unsigned int,
__map_depth(sb, index),
depth),
alloc_hint, wrap);

The smaller of data->shallow_depth and __map_depth(sb, index)
will be used as the maximum range when allocating bits.

For a mmc device (one hw queue, deadline I/O scheduler):
q->nr_requests = sched_tags = 128, so according to the previous
calculation method, dd->async_depth = data->shallow_depth = 96,
and the platform is 64bits with 8 cpus, sched_tags.bitmap_tags.sb.shift=5,
sb.maps[]=32/32/32/32, 32 is smaller than 96, whether it is a read or
a write I/O, tags can be allocated to the maximum range each time,
which has not throttling effect.

In addition, refer to the methods of bfg/kyber I/O scheduler,
limit ratiois are calculated base on sched_tags.bitmap_tags.sb.shift.

This patch can throttle write requests really.

Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1691061162-22898-1-git-send-email-zhiguo.niu@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

audit: fix possible soft lockup in __audit_inode_child()

[ Upstream commit b59bc6e37237e37eadf50cd5de369e913f524463 ]

Tracefs or debugfs maybe cause hundreds to thousands of PATH records,
too many PATH records maybe cause soft lockup.

For example:
  1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n
  2. auditctl -a exit,always -S open -k key
  3. sysctl -w kernel.watchdog_thresh=5
  4. mkdir /sys/kernel/debug/tracing/instances/test

There may be a soft lockup as follows:
  watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498]
  Kernel panic - not syncing: softlockup: hung tasks
  Call trace:
   dump_backtrace+0x0/0x30c
   show_stack+0x20/0x30
   dump_stack+0x11c/0x174
   panic+0x27c/0x494
   watchdog_timer_fn+0x2bc/0x390
   __run_hrtimer+0x148/0x4fc
   __hrtimer_run_queues+0x154/0x210
   hrtimer_interrupt+0x2c4/0x760
   arch_timer_handler_phys+0x48/0x60
   handle_percpu_devid_irq+0xe0/0x340
   __handle_domain_irq+0xbc/0x130
   gic_handle_irq+0x78/0x460
   el1_irq+0xb8/0x140
   __audit_inode_child+0x240/0x7bc
   tracefs_create_file+0x1b8/0x2a0
   trace_create_file+0x18/0x50
   event_create_dir+0x204/0x30c
   __trace_add_new_event+0xac/0x100
   event_trace_add_tracer+0xa0/0x130
   trace_array_create_dir+0x60/0x140
   trace_array_create+0x1e0/0x370
   instance_mkdir+0x90/0xd0
   tracefs_syscall_mkdir+0x68/0xa0
   vfs_mkdir+0x21c/0x34c
   do_mkdirat+0x1b4/0x1d4
   __arm64_sys_mkdirat+0x4c/0x60
   el0_svc_common.constprop.0+0xa8/0x240
   do_el0_svc+0x8c/0xc0
   el0_svc+0x20/0x30
   el0_sync_handler+0xb0/0xb4
   el0_sync+0x160/0x180

Therefore, we add cond_resched() to __audit_inode_child() to fix it.

Fixes: 5195d8e217a7 ("audit: dynamically allocate audit_names when not enough space is in the names array")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a2xx: Call adreno_gpu_init() earlier

[ Upstream commit db07ce5da8b26bfeaf437a676ae49bd3bb1eace6 ]

The adreno_is_a20x() and adreno_is_a225() functions rely on the
GPU revision, but such information is retrieved inside adreno_gpu_init(),
which is called afterwards.

Fix this problem by caling adreno_gpu_init() earlier, so that
the GPU information revision is available when adreno_is_a20x()
and adreno_is_a225() run.

Tested on a imx53-qsb board.

Fixes: 21af872cd8c6 ("drm/msm/adreno: add a2xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543456/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix variable dereferenced issue in amdgpu_device_attr_create()

[ Upstream commit 25e6373a5b8efc623443f2699d2b929bf3067d76 ]

- fix variable ('attr') dereferenced issue.
- using condition check instead of BUG_ON().

Fixes: 4e01847c38f7 ("drm/amdgpu: optimize amdgpu device attribute code")
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smackfs: Prevent underflow in smk_set_cipso()

[ Upstream commit 3ad49d37cf5759c3b8b68d02e3563f633d9c1aee ]

There is a upper bound to "catlen" but no lower bound to prevent
negatives.  I don't see that this necessarily causes a problem but we
may as well be safe.

Fixes: e114e473771c ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix the irq index in dpu_encoder_phys_wb_wait_for_commit_done

[ Upstream commit d93cf453f51da168f4410ba73656f1e862096973 ]

Since commit 1e7ac595fa46 ("drm/msm/dpu: pass irq to
dpu_encoder_helper_wait_for_irq()") the
dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather
than the IRQ index in phys_enc->intr table, however writeback got the
older invocation in place. This was unnoticed for several releases, but
now it's time to fix it.

Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550924/
Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: meson_sm: fix to avoid potential NULL pointer dereference

[ Upstream commit f2ed165619c16577c02b703a114a1f6b52026df4 ]

of_match_device() may fail and returns a NULL pointer.

Fix this by checking the return value of of_match_device.

Fixes: 8cde3c2153e8 ("firmware: meson_sm: Rework driver as a proper platform driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/tencent_AA08AAA6C4F34D53ADCE962E188A879B8206@qq.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Don't leak some plane state

[ Upstream commit fd0ad3b2365c1c58aa5a761c18efc4817193beb6 ]

Apparently no one noticed that mdp5 plane states leak like a sieve
ever since we introduced plane_state->commit refcount a few years ago
in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too
early by tracking commits, v3.")

Fix it by using the right helpers.

Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reported-and-tested-by: dorum@noisolation.com
Cc: dorum@noisolation.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551236/
Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: smem: Fix incompatible types in comparison

[ Upstream commit 5f908786cf44fcb397cfe0f322ef2f41b0909e2a ]

This patch fixes the following sparse error:

drivers/soc/qcom/smem.c:738:30: error: incompatible types in comparison expression (different add        ress spaces):
drivers/soc/qcom/smem.c:738:30:    void *
drivers/soc/qcom/smem.c:738:30:    void [noderef] __iomem *

In addr_in_range(), "base" is of type void __iomem *, converting
void *addr to the same type to fix above sparse error.

Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230801094807.4146779-1-chenjiahao16@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: xlnx: zynqmp_dpsub: Add missing check for dma_set_mask

[ Upstream commit 1832fba7f9780aff67c96ad30f397c2d76141833 ]

Add check for dma_set_mask() and return the error if it fails.

Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig

[ Upstream commit 5087fd9e80e539d2163accd045b73da64de7de95 ]

Time to remove "IMA_TRUSTED_KEYRING".

Fixes: f4dc37785e9b ("integrity: define '.evm' as a builtin 'trusted' keyring") # v4.5+
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01

[ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ]

The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.

Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()

[ Upstream commit fedf429e071f6dbbe7a69dfc342492e037692018 ]

As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.

Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-6-geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/armada: Fix off-by-one error in armada_overlay_get_property()

[ Upstream commit 5f0d984053f74983a287100a9519b2fabb785fb5 ]

As ffs() returns one more than the index of the first bit set (zero
means no bits set), the color key mode value is shifted one position too
much.

Fix this by using FIELD_GET() instead.

Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port

[ Upstream commit 7141209db9c335ab261a17933809a3e660ebdc12 ]

Primary Ethernet interface is connected to the port 8 (not 5).

Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230723195416.7831-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: Fix the I2C7 interrupt

[ Upstream commit f9568d22ce06192a7e14bda3a29dc216659554ff ]

I2C6 and I2C7 use the same interrupts, which is incorrect.
In the downstream kernel, I2C7 has interrupts of 608 instead of 607.

Fixes: 81bee6953b58 ("arm64: dts: qcom: sm8150: add i2c nodes")
Signed-off-by: Zeyan Li <qaz6750@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/SY7P282MB378712225CBCEA95FE71554DB201A@SY7P282MB3787.AUSP282.PROD.OUTLOOK.COM
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()

[ Upstream commit d6ce4f0ea19c32f10867ed93d8386924326ab474 ]

when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference.

Fixes: 0d638a07d3a1 ("of: Convert to using %pOF instead of full_name")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727080246.519539-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: dpaux: Fix incorrect return value of platform_get_irq

[ Upstream commit 2a1ca44b654346cadfc538c4fb32eecd8daf3140 ]

When platform_get_irq fails, we should return dpaux->irq
instead of -ENXIO.

Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-13-frank.li@vivo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Update dev core dump to not print backwards

[ Upstream commit 903705111d863ed8ccf73465da77d232fc422ec1 ]

Device core dump add block method adds hardware blocks to dumping queue
with stack behavior which causes the hardware blocks to be printed in
reverse order. Change the addition to dumping queue data structure
from "list_add" to "list_add_tail" for FIFO queue behavior.

Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546200/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/md-bitmap: hold 'reconfig_mutex' in backlog_store()

[ Upstream commit 44abfa6a95df425c0660d56043020b67e6d93ab8 ]

Several reasons why 'reconfig_mutex' should be held:

1) rdev_for_each() is not safe to be called without the lock, because
   rdev can be removed concurrently.
2) mddev_destroy_serial_pool() and mddev_create_serial_pool() should not
   be called concurrently.
3) mddev_suspend() from mddev_destroy/create_serial_pool() should be
   protected by the lock.

Fixes: 10c92fca636e ("md-bitmap: create and destroy wb_info_pool with the change of backlog")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/md-bitmap: remove unnecessary local variable in backlog_store()

[ Upstream commit b4d129640f194ffc4cc64c3e97f98ae944c072e8 ]

Local variable is definied first in the beginning of backlog_store(),
there is no need to define it again.

Fixes: 8c13ab115b57 ("md/bitmap: don't set max_write_behind if there is no write mostly device")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid10: use dereference_rdev_and_rrdev() to get devices

[ Upstream commit 673643490b9a0eb3b25633abe604f62b8f63dba1 ]

Commit 2ae6aaf76912 ("md/raid10: fix io loss while replacement replace
rdev") reads replacement first to prevent io loss. However, there are same
issue in wait_blocked_dev() and raid10_handle_discard(), too. Fix it by
using dereference_rdev_and_rrdev() to get devices.

Fixes: d30588b2731f ("md/raid10: improve raid10 discard request")
Fixes: f2e7e269a752 ("md/raid10: pull the code that wait for blocked dev into one function")
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-4-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid10: factor out dereference_rdev_and_rrdev()

[ Upstream commit b99f8fd2d91eb734f13098aa1cf337edaca454b7 ]

Factor out a helper to get 'rdev' and 'replacement' from config->mirrors.
Just to make code cleaner and prepare to fix the bug of io loss while
'replacement' replace 'rdev'.

There is no functional change.

Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-3-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 673643490b9a ("md/raid10: use dereference_rdev_and_rrdev() to get devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: restore 'noio_flag' for the last mddev_resume()

[ Upstream commit e24ed04389f9619e0aaef615a8948633c182a8b0 ]

memalloc_noio_save() is called for the first mddev_suspend(), and
repeated mddev_suspend() only increase 'suspended'. However,
memalloc_noio_restore() is also called for the first mddev_resume(),
which means that memory reclaim will be enabled before the last
mddev_resume() is called, while the array is still suspended.

Fix this problem by restore 'noio_flag' for the last mddev_resume().

Fixes: 78f57ef9d50a ("md: use memalloc scope APIs in mddev_suspend()/mddev_resume()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230628012931.88911-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: Change active_io to percpu

[ Upstream commit 72adae23a72cb12e2ef0dcd7c0aa042867f27998 ]

Now the type of active_io is atomic. It's used to count how many ios are
in the submitting process and it's added and decreased very time. But it
only needs to check if it's zero when suspending the raid. So we can
switch atomic to percpu to improve the performance.

After switching active_io to percpu type, we use the state of active_io
to judge if the raid device is suspended. And we don't need to wake up
->sb_wait in md_handle_request anymore. It's done in the callback function
which is registered when initing active_io. The argument mddev->suspended
is only used to count how many users are trying to set raid to suspend
state.

Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: Factor out is_md_suspended helper

[ Upstream commit d19329133d25ad3dc32f8a62635692cb2f189014 ]

This helper function will be used in next patch. It's easy for
understanding.

Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Update min() to min_t() in 'amdgpu_info_ioctl'

[ Upstream commit a0cc8e1512ad72c9f97cdcb76d42715730adaf62 ]

Fixes the following:

WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+               ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));

And other style fixes:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996-gemini: fix touchscreen VIO supply

[ Upstream commit 21fc24ee9c5943732c9ae538766c9be93d70d936 ]

According to bindings and Linux driver, there is no VDDA but VIO supply.

Fixes: 4ac46b3682c5 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: Fix the min frequency of "ice_core_clk"

[ Upstream commit bbbef6e24bc4493602df68b052f6f48d48e3184a ]

Minimum frequency of the "ice_core_clk" should be 75MHz as specified in the
downstream vendor devicetree. So fix it!

https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LA.UM.7.3.r1-09300-sdm845.0/arch/arm64/boot/dts/qcom/sdm845.dtsi

Fixes: 433f9a57298f ("arm64: dts: sdm845: add Inline Crypto Engine registers and clock")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>