Tony Lindgren [Tue, 3 Mar 2020 21:18:36 +0000 (13:18 -0800)]
ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
[ Upstream commit
b46b2b7ba6e104d265ab705914859ec0db7a98c5 ]
Commit
cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode")
caused a regression for dm814x boards where NFSroot would no longer work.
Let's fix the issue by configuring "rgmii-id" mode as internal delays are
needed that is no longer the case with "rgmii" mode.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ondrej Jirman [Fri, 21 Feb 2020 20:27:26 +0000 (21:27 +0100)]
bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads
[ Upstream commit
a43ab30dcd4a1abcdd0d2461bf1cf7c0817f6cd3 ]
When doing a 16-bit read that returns data in the MSB byte, the
RSB_DATA register will keep the MSB byte unchanged when doing
the following 8-bit read. sunxi_rsb_read() will then return
a result that contains high byte from 16-bit read mixed with
the 8-bit result.
The consequence is that after this happens the PMIC's regmap will
look like this: (0x33 is the high byte from the 16-bit read)
% cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers
00: 33
01: 33
02: 33
03: 33
04: 33
05: 33
06: 33
07: 33
08: 33
09: 33
0a: 33
0b: 33
0c: 33
0d: 33
0e: 33
[snip]
Fix this by masking the result of the read with the correct mask
based on the size of the read. There are no 16-bit users in the
mainline kernel, so this doesn't need to get into the stable tree.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ondrej Jirman [Sat, 22 Feb 2020 22:31:52 +0000 (23:31 +0100)]
ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage
[ Upstream commit
a40550952c000667b20082d58077bc647da6c890 ]
Lowering the voltage solves the quick image degradation over time
(minutes), that was probably caused by overheating.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Mon, 13 Apr 2020 08:48:18 +0000 (10:48 +0200)]
Linux 5.4.32
Lu Baolu [Wed, 15 Jan 2020 03:03:58 +0000 (11:03 +0800)]
iommu/vt-d: Allow devices with RMRRs to use identity domain
commit
9235cb13d7d17baba0b3a9277381258361e95c16 upstream.
Since commit
ea2447f700cab ("intel-iommu: Prevent devices with
RMRRs from being placed into SI Domain"), the Intel IOMMU driver
doesn't allow any devices with RMRR locked to use the identity
domain. This was added to to fix the issue where the RMRR info
for devices being placed in and out of the identity domain gets
lost. This identity maps all RMRRs when setting up the identity
domain, so that devices with RMRRs could also use it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sultan Alsawaf [Tue, 7 Apr 2020 20:32:22 +0000 (13:32 -0700)]
drm/i915: Fix ref->mutex deadlock in i915_active_wait()
The following deadlock exists in i915_active_wait() due to a double lock
on ref->mutex (call chain listed in order from top to bottom):
i915_active_wait();
mutex_lock_interruptible(&ref->mutex); <-- ref->mutex first acquired
i915_active_request_retire();
node_retire();
active_retire();
mutex_lock_nested(&ref->mutex, SINGLE_DEPTH_NESTING); <-- DEADLOCK
Fix the deadlock by skipping the second ref->mutex lock when
active_retire() is called through i915_active_request_retire().
Note that this bug only affects 5.4 and has since been fixed in 5.5.
Normally, a backport of the fix from 5.5 would be in order, but the
patch set that fixes this deadlock involves massive changes that are
neither feasible nor desirable for backporting [1][2][3]. Therefore,
this small patch was made to address the deadlock specifically for 5.4.
[1]
274cbf20fd10 ("drm/i915: Push the i915_active.retire into a worker")
[2]
093b92287363 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
[3]
750bde2fd4ff ("drm/i915: Serialise with remote retirement")
Fixes:
12c255b5dad1 ("drm/i915: Provide an i915_active.acquire callback")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qiujun Huang [Sun, 29 Mar 2020 08:56:47 +0000 (16:56 +0800)]
fbcon: fix null-ptr-deref in fbcon_switch
commit
b139f8b00db4a8ea75a4174346eafa48041aa489 upstream.
Set logo_shown to FBCON_LOGO_CANSHOW when the vc was deallocated.
syzkaller report: https://lkml.org/lkml/2020/3/27/403
general protection fault, probably for non-canonical address
0xdffffc000000006c: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:fbcon_switch+0x28f/0x1740
drivers/video/fbdev/core/fbcon.c:2260
Call Trace:
redraw_screen+0x2a8/0x770 drivers/tty/vt/vt.c:1008
vc_do_resize+0xfe7/0x1360 drivers/tty/vt/vt.c:1295
fbcon_init+0x1221/0x1ab0 drivers/video/fbdev/core/fbcon.c:1219
visual_init+0x305/0x5c0 drivers/tty/vt/vt.c:1062
do_bind_con_driver+0x536/0x890 drivers/tty/vt/vt.c:3542
do_take_over_console+0x453/0x5b0 drivers/tty/vt/vt.c:4122
do_fbcon_takeover+0x10b/0x210 drivers/video/fbdev/core/fbcon.c:588
fbcon_fb_registered+0x26b/0x340 drivers/video/fbdev/core/fbcon.c:3259
do_register_framebuffer drivers/video/fbdev/core/fbmem.c:1664 [inline]
register_framebuffer+0x56e/0x980 drivers/video/fbdev/core/fbmem.c:1832
dlfb_usb_probe.cold+0x1743/0x1ba3 drivers/video/fbdev/udlfb.c:1735
usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:374
accessing vc_cons[logo_shown].d->vc_top causes the bug.
Reported-by: syzbot+732528bae351682f1f27@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200329085647.25133-1-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Tue, 10 Mar 2020 04:26:17 +0000 (21:26 -0700)]
blk-mq: Keep set->nr_hw_queues and set->map[].nr_queues in sync
commit
6e66b49392419f3fe134e1be583323ef75da1e4b upstream.
blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:
WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x361/0x430 kernel/kthread.c:255
Fixes:
ed76e329d74a ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avihai Horon [Wed, 18 Mar 2020 10:17:41 +0000 (12:17 +0200)]
RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow
commit
987914ab841e2ec281a35b54348ab109b4c0bb4e upstream.
After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.
This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.
The following crash from syzkaller revealed it.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RSP: 0018:
ffff88006586f980 EFLAGS:
00010207
RAX:
0000000000000009 RBX:
0000000000000000 RCX:
1ffff1000d5fe475
RDX:
ffff8800621e17c0 RSI:
ffffffff820d45f9 RDI:
000000000000004c
RBP:
ffff88006586fa50 R08:
ffffed000cb0df73 R09:
ffffed000cb0df72
R10:
ffff88006586fa70 R11:
ffffed000cb0df73 R12:
1ffff1000cb0df30
R13:
ffff88006586fae8 R14:
dffffc0000000000 R15:
ffff88006aff2200
FS:
00000000016fc880(0000) GS:
ffff88006d000000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000040 CR3:
0000000063fec000 CR4:
00000000000006b0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
? ib_copy_path_rec_from_user+0xcc0/0xcc0
? __mutex_unlock_slowpath+0xfc/0x670
? wait_for_completion+0x3b0/0x3b0
? ucma_query_route+0x818/0xc60
ucma_query_route+0x818/0xc60
? ucma_listen+0x1b0/0x1b0
? sched_clock_cpu+0x18/0x1d0
? sched_clock_cpu+0x18/0x1d0
? ucma_listen+0x1b0/0x1b0
? ucma_write+0x292/0x460
ucma_write+0x292/0x460
? ucma_close_id+0x60/0x60
? sched_clock_cpu+0x18/0x1d0
? sched_clock_cpu+0x18/0x1d0
__vfs_write+0xf7/0x620
? ucma_close_id+0x60/0x60
? kernel_read+0x110/0x110
? time_hardirqs_on+0x19/0x580
? lock_acquire+0x18b/0x3a0
? finish_task_switch+0xf3/0x5d0
? _raw_spin_unlock_irq+0x29/0x40
? _raw_spin_unlock_irq+0x29/0x40
? finish_task_switch+0x1be/0x5d0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? security_file_permission+0x172/0x1e0
vfs_write+0x192/0x460
ksys_write+0xc6/0x1a0
? __ia32_sys_read+0xb0/0xb0
? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
? do_syscall_64+0x1d/0x470
do_syscall_64+0x9e/0x470
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qiujun Huang [Sun, 8 Mar 2020 09:45:27 +0000 (17:45 +0800)]
Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl
commit
71811cac8532b2387b3414f7cd8fe9e497482864 upstream.
Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't
increase dlc->refcnt.
Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bernard Metzler [Fri, 28 Feb 2020 17:35:34 +0000 (18:35 +0100)]
RDMA/siw: Fix passive connection establishment
commit
33fb27fd54465c74cbffba6315b2f043e90cec4c upstream.
Holding the rtnl_lock while iterating a devices interface address list
potentially causes deadlocks with the cma_netdev_callback. While this was
implemented to limit the scope of a wildcard listen to addresses of the
current device only, a better solution limits the scope of the socket to
the device. This completely avoiding locking, and also results in
significant code simplification.
Fixes:
c421651fa229 ("RDMA/siw: Add missing rtnl_lock around access to ifa")
Link: https://lore.kernel.org/r/20200228173534.26815-1-bmt@zurich.ibm.com
Reported-by: syzbot+55de90ab5f44172b0c90@syzkaller.appspotmail.com
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gunthorpe [Thu, 27 Feb 2020 20:36:51 +0000 (16:36 -0400)]
RDMA/cma: Teach lockdep about the order of rtnl and lock
commit
32ac9e4399b12d3e54d312a0e0e30ed5cd19bd4e upstream.
This lock ordering only happens when bonding is enabled and a certain
bonding related event fires. However, since it can happen this is a global
restriction on lock ordering.
Teach lockdep about the order directly and unconditionally so bugs here
are found quickly.
See https://syzkaller.appspot.com/bug?extid=
55de90ab5f44172b0c90
Link: https://lore.kernel.org/r/20200227203651.GA27185@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gunthorpe [Tue, 18 Feb 2020 19:45:38 +0000 (15:45 -0400)]
RDMA/ucma: Put a lock around every call to the rdma_cm layer
commit
7c11910783a1ea17e88777552ef146cace607b3c upstream.
The rdma_cm must be used single threaded.
This appears to be a bug in the design, as it does have lots of locking
that seems like it should allow concurrency. However, when it is all said
and done every single place that uses the cma_exch() scheme is broken, and
all the unlocked reads from the ucma of the cm_id data are wrong too.
syzkaller has been finding endless bugs related to this.
Fixing this in any elegant way is some enormous amount of work. Take a
very big hammer and put a mutex around everything to do with the
ucma_context at the top of every syscall.
Fixes:
75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Link: https://lore.kernel.org/r/20200218210432.GA31966@ziepe.ca
Reported-by: syzbot+adb15cf8c2798e4e0db4@syzkaller.appspotmail.com
Reported-by: syzbot+e5579222b6a3edd96522@syzkaller.appspotmail.com
Reported-by: syzbot+4b628fcc748474003457@syzkaller.appspotmail.com
Reported-by: syzbot+29ee8f76017ce6cf03da@syzkaller.appspotmail.com
Reported-by: syzbot+6956235342b7317ec564@syzkaller.appspotmail.com
Reported-by: syzbot+b358909d8d01556b790b@syzkaller.appspotmail.com
Reported-by: syzbot+6b46b135602a3f3ac99e@syzkaller.appspotmail.com
Reported-by: syzbot+8458d13b13562abf6b77@syzkaller.appspotmail.com
Reported-by: syzbot+bd034f3fdc0402e942ed@syzkaller.appspotmail.com
Reported-by: syzbot+c92378b32760a4eef756@syzkaller.appspotmail.com
Reported-by: syzbot+68b44a1597636e0b342c@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Borntraeger [Fri, 21 Feb 2020 04:04:03 +0000 (20:04 -0800)]
include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap
commit
467d12f5c7842896d2de3ced74e4147ee29e97c8 upstream.
QEMU has a funny new build error message when I use the upstream kernel
headers:
CC block/file-posix.o
In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4,
from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29,
from /home/cborntra/REPOS/qemu/include/block/accounting.h:28,
from /home/cborntra/REPOS/qemu/include/block/block_int.h:27,
from /home/cborntra/REPOS/qemu/block/file-posix.c:30:
/usr/include/linux/swab.h: In function `__swab':
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef]
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^~~~~~
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "("
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^
cc1: all warnings being treated as errors
make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1
rm tests/qemu-iotests/socket_scm_helper.o
This was triggered by commit
d5767057c9a ("uapi: rename ext2_swab() to
swab() and share globally in swab.h"). That patch is doing
#include <asm/bitsperlong.h>
but it uses BITS_PER_LONG.
The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG.
Let us use the __ variant in swap.h
Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com
Fixes:
d5767057c9a ("uapi: rename ext2_swab() to swab() and share globally in swab.h")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Mon, 10 Feb 2020 21:51:08 +0000 (22:51 +0100)]
ceph: canonicalize server path in place
commit
b27a939e8376a3f1ed09b9c33ef44d20f18ec3d0 upstream.
syzbot reported that
4fbc0c711b24 ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.
We don't really need the supplied server path, so canonicalize it
in place and compare it directly. To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.
Fixes:
4fbc0c711b24 ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiubo Li [Fri, 20 Dec 2019 14:34:04 +0000 (09:34 -0500)]
ceph: remove the extra slashes in the server path
commit
4fbc0c711b2464ee1551850b85002faae0b775d5 upstream.
It's possible to pass the mount helper a server path that has more
than one contiguous slash character. For example:
$ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/
In the MDS server side the extra slashes of the server path will be
treated as snap dir, and then we can get the following debug logs:
ceph: mount opening path //
ceph: open_root_inode opening '//'
ceph: fill_trace
0000000059b8a3bc is_dentry 0 is_target 1
ceph: alloc_inode
00000000dc4ca00b
ceph: get_inode created new inode
00000000dc4ca00b 1.
ffffffffffffffff ino 1
ceph: get_inode on 1=1.
ffffffffffffffff got
00000000dc4ca00b
And then when creating any new file or directory under the mount
point, we can hit the following BUG_ON in ceph_fill_trace():
BUG_ON(ceph_snap(dir) != dvino.snap);
Have the client ignore the extra slashes in the server path when
mounting. This will also canonicalize the path, so that identical mounts
can be consilidated.
1) "//mydir1///mydir//"
2) "/mydir1/mydir"
3) "/mydir1/mydir/"
Regardless of the internal treatment of these paths, the kernel still
stores the original string including the leading '/' for presentation
to userland.
URL: https://tracker.ceph.com/issues/42771
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 7 Jan 2020 21:51:39 +0000 (22:51 +0100)]
ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A
commit
c74067a0f776c1d695a713a4388c3b6a094ee40a upstream.
i.MX7D is supported for either the v7-A or the v7-M cores,
but the latter causes a warning:
WARNING: unmet direct dependencies detected for ARM_ERRATA_814220
Depends on [n]: CPU_V7 [=n]
Selected by [y]:
- SOC_IMX7D [=y] && ARCH_MXC [=y] && (ARCH_MULTI_V7 [=n] || ARM_SINGLE_ARMV7M [=y])
Make the select statement conditional.
Fixes:
4562fa4c86c9 ("ARM: imx: Enable ARM_ERRATA_814220 for i.MX6UL and i.MX7D")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Christian Eggers <ceggers@arri.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anson Huang [Wed, 11 Dec 2019 02:53:36 +0000 (10:53 +0800)]
ARM: imx: Enable ARM_ERRATA_814220 for i.MX6UL and i.MX7D
commit
4562fa4c86c92a2df635fe0697c9e06379738741 upstream.
ARM_ERRATA_814220 has below description:
The v7 ARM states that all cache and branch predictor maintenance
operations that do not specify an address execute, relative to
each other, in program order.
However, because of this erratum, an L2 set/way cache maintenance
operation can overtake an L1 set/way cache maintenance operation.
This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3,
r0p4, r0p5.
i.MX6UL and i.MX7D have Cortex-A7 r0p5 inside, need to enable
ARM_ERRATA_814220 for proper workaround.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Christian Eggers <ceggers@arri.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Vesker [Thu, 5 Mar 2020 12:38:41 +0000 (14:38 +0200)]
IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads
commit
41e684ef3f37ce6e5eac3fb5b9c7c1853f4b0447 upstream.
Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.
Newer devices and firmware will have configurations with the flexparser
but without mpls support.
Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.
Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.
Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes:
e818e255a58d ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaike Wan [Thu, 26 Mar 2020 16:38:07 +0000 (12:38 -0400)]
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
commit
5c15abc4328ad696fa61e2f3604918ed0c207755 upstream.
When the hfi1 driver is unloaded, kmemleak will report the following
issue:
unreferenced object 0xffff8888461a4c08 (size 8):
comm "kworker/0:0", pid 5, jiffies
4298601264 (age 2047.134s)
hex dump (first 8 bytes):
73 64 6d 61 30 00 ff ff sdma0...
backtrace:
[<
00000000311a6ef5>] kvasprintf+0x62/0xd0
[<
00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90
[<
0000000060657dbb>] kobject_init_and_add+0x5d/0xb0
[<
00000000346fe72b>] 0xffffffffa0c5ecba
[<
000000006cfc5819>] 0xffffffffa0c866b9
[<
0000000031c65580>] 0xffffffffa0c38e87
[<
00000000e9739b3f>] local_pci_probe+0x41/0x80
[<
000000006c69911d>] work_for_cpu_fn+0x16/0x20
[<
00000000601267b5>] process_one_work+0x171/0x380
[<
0000000049a0eefa>] worker_thread+0x1d1/0x3f0
[<
00000000909cf2b9>] kthread+0xf8/0x130
[<
0000000058f5f874>] ret_from_fork+0x35/0x40
This patch fixes the issue by:
- Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs().
- This will fix the memory leak.
- Calling kobject_put() to unwind operations only for those entries in
dd->per_sdma[] whose operations have succeeded (including the current
one that has just failed) in hfi1_verbs_register_sysfs().
Cc: <stable@vger.kernel.org>
Fixes:
0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup")
Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaike Wan [Thu, 26 Mar 2020 16:38:14 +0000 (12:38 -0400)]
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
commit
dfb5394f804ed4fcea1fc925be275a38d66712ab upstream.
When kobject_init_and_add() returns an error in the function
hfi1_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.
This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Cercueil [Fri, 6 Mar 2020 22:29:27 +0000 (23:29 +0100)]
ASoC: jz4740-i2s: Fix divider written at incorrect offset in register
commit
9401d5aa328e64617d87abd59af1c91cace4c3e4 upstream.
The 4-bit divider value was written at offset 8, while the jz4740
programming manual locates it at offset 0.
Fixes:
26b0aad80a86 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 3 Apr 2020 15:48:34 +0000 (17:48 +0200)]
platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
commit
767191db8220db29f78c031f4d27375173c336d5 upstream.
The Power Management Events (PMEs) the INT0002 driver listens for get
signalled by the Power Management Controller (PMC) using the same IRQ
as used for the ACPI SCI.
Since commit
fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering, without there being a wakeup
cause recognized by the ACPI sleep code, will no longer wakeup the system.
This breaks PMEs / wakeups signalled to the INT0002 driver, the system
never leaves the s2idle_loop() now.
Use acpi_register_wakeup_handler() to register a function which checks
the GPE0a_STS register for a PME and trigger a wakeup when a PME has
been signalled.
Fixes:
fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 3 Apr 2020 15:48:33 +0000 (17:48 +0200)]
ACPI: PM: Add acpi_[un]register_wakeup_handler()
commit
ddfd9dcf270ce23ed1985b66fcfa163920e2e1b8 upstream.
Since commit
fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering without there being a wakeup
cause recognized by the ACPI sleep code will no longer wakeup the system.
This works as intended, but this is a problem for devices where the SCI
is shared with another device which is also a wakeup source.
In the past these, from the pov of the ACPI sleep code, spurious SCIs
would still cause a wakeup so the wakeup from the device sharing the
interrupt would actually wakeup the system. This now no longer works.
This is a problem on e.g. Bay Trail-T and Cherry Trail devices where
some peripherals (typically the XHCI controller) can signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system, this uses the same interrupt as the SCI.
These wakeups are handled through a special INT0002 ACPI device which
checks for events in the GPE0a_STS for this and takes care of acking
the PME so that the shared interrupt stops triggering.
The change to the ACPI sleep code to ignore the spurious SCI, causes
the system to no longer wakeup on these PME events. To make things
worse this means that the INT0002 device driver interrupt handler will
no longer run, causing the PME to not get cleared and resulting in the
system hanging. Trying to wakeup the system after such a PME through e.g.
the power button no longer works.
Add an acpi_register_wakeup_handler() function which registers
a handler to be called from acpi_s2idle_wake() and when the handler
returns true, return true from acpi_s2idle_wake().
The INT0002 driver will use this mechanism to check the GPE0a_STS
register from acpi_s2idle_wake() and to tell the system to wakeup
if a PME is signaled in the register.
Fixes:
fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kaiser [Thu, 5 Mar 2020 20:58:20 +0000 (21:58 +0100)]
hwrng: imx-rngc - fix an error path
commit
47a1f8e8b3637ff5f7806587883d7d94068d9ee8 upstream.
Make sure that the rngc interrupt is masked if the rngc self test fails.
Self test failure means that probe fails as well. Interrupts should be
masked in this case, regardless of the error.
Cc: stable@vger.kernel.org
Fixes:
1d5449445bd0 ("hwrng: mx-rngc - add a driver for Freescale RNGC")
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Thu, 2 Apr 2020 04:02:25 +0000 (21:02 -0700)]
tools/accounting/getdelays.c: fix netlink attribute length
commit
4054ab64e29bb05b3dfe758fff3c38a74ba753bb upstream.
A recent change to the netlink code:
6e237d099fac ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32). Yafang
reported this error message for tools/accounting/getdelays.c.
send_cmd() is wrongly adding 1 to the attribute length. As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.
Fixes:
9e06d3f9f6b1 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Thu, 2 Apr 2020 04:04:23 +0000 (21:04 -0700)]
slub: improve bit diffusion for freelist ptr obfuscation
commit
1ad53d9fa3f6168ebcf48a50e08b170432da2257 upstream.
Under CONFIG_SLAB_FREELIST_HARDENED=y, the obfuscation was relatively weak
in that the ptr and ptr address were usually so close that the first XOR
would result in an almost entirely 0-byte value[1], leaving most of the
"secret" number ultimately being stored after the third XOR. A single
blind memory content exposure of the freelist was generally sufficient to
learn the secret.
Add a swab() call to mix bits a little more. This is a cheap way (1
cycle) to make attacks need more than a single exposure to learn the
secret (or to know _where_ the exposure is in memory).
kmalloc-32 freelist walk, before:
ptr ptr_addr stored value secret
ffff90c22e019020@
ffff90c22e019000 is
86528eb656b3b5bd (
86528eb656b3b59d)
ffff90c22e019040@
ffff90c22e019020 is
86528eb656b3b5fd (
86528eb656b3b59d)
ffff90c22e019060@
ffff90c22e019040 is
86528eb656b3b5bd (
86528eb656b3b59d)
ffff90c22e019080@
ffff90c22e019060 is
86528eb656b3b57d (
86528eb656b3b59d)
ffff90c22e0190a0@
ffff90c22e019080 is
86528eb656b3b5bd (
86528eb656b3b59d)
...
after:
ptr ptr_addr stored value secret
ffff9eed6e019020@
ffff9eed6e019000 is
793d1135d52cda42 (
86528eb656b3b59d)
ffff9eed6e019040@
ffff9eed6e019020 is
593d1135d52cda22 (
86528eb656b3b59d)
ffff9eed6e019060@
ffff9eed6e019040 is
393d1135d52cda02 (
86528eb656b3b59d)
ffff9eed6e019080@
ffff9eed6e019060 is
193d1135d52cdae2 (
86528eb656b3b59d)
ffff9eed6e0190a0@
ffff9eed6e019080 is
f93d1135d52cdac2 (
86528eb656b3b59d)
[1] https://blog.infosectcbr.com.au/2020/03/weaknesses-in-linux-kernel-heap.html
Fixes:
2482ddec670f ("mm: add SLUB free list pointer obfuscation")
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/202003051623.AF4F8CB@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yury Norov [Fri, 31 Jan 2020 06:16:40 +0000 (22:16 -0800)]
uapi: rename ext2_swab() to swab() and share globally in swab.h
commit
d5767057c9a76a29f073dad66b7fa12a90e8c748 upstream.
ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.
There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h
ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.
Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thinh Nguyen [Thu, 5 Mar 2020 21:24:01 +0000 (13:24 -0800)]
usb: dwc3: gadget: Wrap around when skip TRBs
commit
2dedea035ae82c5af0595637a6eda4655532b21e upstream.
When skipping TRBs, we need to account for wrapping around the ring
buffer and not modifying some invalid TRBs. Without this fix, dwc3 won't
be able to check for available TRBs.
Cc: stable <stable@vger.kernel.org>
Fixes:
7746a8dfb3f9 ("usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Fri, 21 Feb 2020 20:10:37 +0000 (21:10 +0100)]
random: always use batched entropy for get_random_u{32,64}
commit
69efea712f5b0489e67d07565aad5c94e09a3e52 upstream.
It turns out that RDRAND is pretty slow. Comparing these two
constructions:
for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret))
arch_get_random_long(&ret);
and
long buf[CHACHA_BLOCK_SIZE / sizeof(long)];
extract_crng((u8 *)buf);
it amortizes out to 352 cycles per long for the top one and 107 cycles
per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H.
And importantly, the top one has the drawback of not benefiting from the
real rng, whereas the bottom one has all the nice benefits of using our
own chacha rng. As get_random_u{32,64} gets used in more places (perhaps
beyond what it was originally intended for when it was introduced as
get_random_{int,long} back in the md5 monstrosity era), it seems like it
might be a good thing to strengthen its posture a tiny bit. Doing this
should only be stronger and not any weaker because that pool is already
initialized with a bunch of rdrand data (when available). This way, we
get the benefits of the hardware rng as well as our own rng.
Another benefit of this is that we no longer hit pitfalls of the recent
stream of AMD bugs in RDRAND. One often used code pattern for various
things is:
do {
val = get_random_u32();
} while (hash_table_contains_key(val));
That recent AMD bug rendered that pattern useless, whereas we're really
very certain that chacha20 output will give pretty distributed numbers,
no matter what.
So, this simplification seems better both from a security perspective
and from a performance perspective.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200221201037.30231-1-Jason@zx2c4.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Schnelle [Wed, 22 Jan 2020 12:38:22 +0000 (13:38 +0100)]
s390: prevent leaking kernel address in BEAR
commit
0b38b5e1d0e2f361e418e05c179db05bb688bbd6 upstream.
When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.
Fixes:
b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Sat, 4 Apr 2020 21:48:45 +0000 (23:48 +0200)]
r8169: change back SG and TSO to be disabled by default
[ Upstream commit
95099c569a9fdbe186a27447dfa8a5a0562d4b7f ]
There has been a number of reports that using SG/TSO on different chip
versions results in tx timeouts. However for a lot of people SG/TSO
works fine. Therefore disable both features by default, but allow users
to enable them. Use at own risk!
Fixes:
93681cd7d94f ("r8169: enable HW csum and TSO")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Machata [Sun, 5 Apr 2020 06:50:22 +0000 (09:50 +0300)]
mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE
[ Upstream commit
ccfc569347f870830e7c7cf854679a06cf9c45b5 ]
The handler for FLOW_ACTION_VLAN_MANGLE ends by returning whatever the
lower-level function that it calls returns. If there are more actions lined
up after this action, those are never offloaded. Fix by only bailing out
when the called function returns an error.
Fixes:
a150201a70da ("mlxsw: spectrum: Add support for vlan modify TC action")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Fri, 3 Apr 2020 15:13:21 +0000 (16:13 +0100)]
tun: Don't put_page() for all negative return values from XDP program
[ Upstream commit
bee348907d19d654e8524d3a946dcd25b693aa7e ]
When an XDP program is installed, tun_build_skb() grabs a reference to
the current page fragment page if the program returns XDP_REDIRECT or
XDP_TX. However, since tun_xdp_act() passes through negative return
values from the XDP program, it is possible to trigger the error path by
mistake and accidentally drop a reference to the fragments page without
taking one, leading to a spurious free. This is believed to be the cause
of some KASAN use-after-free reports from syzbot [1], although without a
reproducer it is not possible to confirm whether this patch fixes the
problem.
Ensure that we only drop a reference to the fragments page if the XDP
transmit or redirect operations actually fail.
[1] https://syzkaller.appspot.com/bug?id=
e76a6af1be4acd727ff6bbca669833f98cbf5d95
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
CC: Eric Dumazet <edumazet@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Fixes:
8ae1aff0b331 ("tuntap: split out XDP logic")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Palethorpe [Wed, 1 Apr 2020 10:06:39 +0000 (12:06 +0200)]
slcan: Don't transmit uninitialized stack data in padding
[ Upstream commit
b9258a2cece4ec1f020715fe3554bc2e360f6264 ]
struct can_frame contains some padding which is not explicitly zeroed in
slc_bump. This uninitialized data will then be transmitted if the stack
initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL).
This commit just zeroes the whole struct including the padding.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Fixes:
a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters")
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: security@kernel.org
Cc: wg@grandegger.com
Cc: mkl@pengutronix.de
Cc: davem@davemloft.net
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jisheng Zhang [Fri, 3 Apr 2020 02:23:29 +0000 (10:23 +0800)]
net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting
[ Upstream commit
3e1221acf6a8f8595b5ce354bab4327a69d54d18 ]
Commit
9463c4455900 ("net: stmmac: dwmac1000: Clear unused address
entries") cleared the unused mac address entries, but introduced an
out-of bounds mac address register programming bug -- After setting
the secondary unicast mac addresses, the "reg" value has reached
netdev_uc_count() + 1, thus we should only clear address entries
if (addr < perfect_addr_number)
Fixes:
9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Fri, 3 Apr 2020 03:58:51 +0000 (20:58 -0700)]
net_sched: fix a missing refcnt in tcindex_init()
[ Upstream commit
a8eab6d35e22f4f21471f16147be79529cd6aaf7 ]
The initial refcnt of struct tcindex_data should be 1,
it is clear that I forgot to set it to 1 in tcindex_init().
This leads to a dec-after-zero warning.
Reported-by: syzbot+8325e509a1bf83ec741d@syzkaller.appspotmail.com
Fixes:
304e024216a8 ("net_sched: add a temporary refcnt for struct tcindex_data")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Sat, 28 Mar 2020 19:12:59 +0000 (12:12 -0700)]
net_sched: add a temporary refcnt for struct tcindex_data
[ Upstream commit
304e024216a802a7dc8ba75d36de82fa136bbf3e ]
Although we intentionally use an ordered workqueue for all tc
filter works, the ordering is not guaranteed by RCU work,
given that tcf_queue_work() is esstenially a call_rcu().
This problem is demostrated by Thomas:
CPU 0:
tcf_queue_work()
tcf_queue_work(&r->rwork, tcindex_destroy_rexts_work);
-> Migration to CPU 1
CPU 1:
tcf_queue_work(&p->rwork, tcindex_destroy_work);
so the 2nd work could be queued before the 1st one, which leads
to a free-after-free.
Enforcing this order in RCU work is hard as it requires to change
RCU code too. Fortunately we can workaround this problem in tcindex
filter by taking a temporary refcnt, we only refcnt it right before
we begin to destroy it. This simplifies the code a lot as a full
refcnt requires much more changes in tcindex_set_parms().
Reported-by: syzbot+46f513c3033d592409d2@syzkaller.appspotmail.com
Fixes:
3d210534cc93 ("net_sched: fix a race condition in tcindex_destroy()")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleksij Rempel [Fri, 3 Apr 2020 07:53:25 +0000 (09:53 +0200)]
net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers
[ Upstream commit
6110dff776f7fa65c35850ef65b41d3b39e2fac2 ]
After the power-down bit is cleared, the chip internally triggers a
global reset. According to the KSZ9031 documentation, we have to wait at
least 1ms for the reset to finish.
If the chip is accessed during reset, read will return 0xffff, while
write will be ignored. Depending on the system performance and MDIO bus
speed, we may or may not run in to this issue.
This bug was discovered on an iMX6QP system with KSZ9031 PHY and
attached PHY interrupt line. If IRQ was used, the link status update was
lost. In polling mode, the link status update was always correct.
The investigation showed, that during a read-modify-write access, the
read returned 0xffff (while the chip was still in reset) and
corresponding write hit the chip _after_ reset and triggered (due to the
0xffff) another reset in an undocumented bit (register 0x1f, bit 1),
resulting in the next write being lost due to the new reset cycle.
This patch fixes the issue by adding a 1...2 ms sleep after the
genphy_resume().
Fixes:
836384d2501d ("net: phy: micrel: Add specific suspend")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuanhong Guo [Fri, 3 Apr 2020 11:28:24 +0000 (19:28 +0800)]
net: dsa: mt7530: fix null pointer dereferencing in port5 setup
[ Upstream commit
0452800f6db4ed0a42ffb15867c0acfd68829f6a ]
The 2nd gmac of mediatek soc ethernet may not be connected to a PHY
and a phy-handle isn't always available.
Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always
connected to switch port 5 and setup mt7530 according to phy address
of 2nd gmac node, causing null pointer dereferencing when phy-handle
isn't defined in dts.
This commit fix this setup code by checking return value of
of_parse_phandle before using it.
Fixes:
38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sun, 5 Apr 2020 20:00:30 +0000 (13:00 -0700)]
net: dsa: bcm_sf2: Ensure correct sub-node is parsed
[ Upstream commit
afa3b592953bfaecfb4f2f335ec5f935cff56804 ]
When the bcm_sf2 was converted into a proper platform device driver and
used the new dsa_register_switch() interface, we would still be parsing
the legacy DSA node that contained all the port information since the
platform firmware has intentionally maintained backward and forward
compatibility to client programs. Ensure that we do parse the correct
node, which is "ports" per the revised DSA binding.
Fixes:
d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sat, 4 Apr 2020 21:35:17 +0000 (14:35 -0700)]
net: dsa: bcm_sf2: Do not register slave MDIO bus with OF
[ Upstream commit
536fab5bf5826404534a6c271f622ad2930d9119 ]
We were registering our slave MDIO bus with OF and doing so with
assigning the newly created slave_mii_bus of_node to the master MDIO bus
controller node. This is a bad thing to do for a number of reasons:
- we are completely lying about the slave MII bus is arranged and yet we
still want to control which MDIO devices it probes. It was attempted
before to play tricks with the bus_mask to perform that:
https://www.spinics.net/lists/netdev/msg429420.html but the approach
was rightfully rejected
- the device_node reference counting is messed up and we are effectively
doing a double probe on the devices we already probed using the
master, this messes up all resources reference counts (such as clocks)
The proper fix for this as indicated by David in his reply to the
thread above is to use a platform data style registration so as to
control exactly which devices we probe:
https://www.spinics.net/lists/netdev/msg430083.html
By using mdiobus_register(), our slave_mii_bus->phy_mask value is used
as intended, and all the PHY addresses that must be redirected towards
our slave MDIO bus is happening while other addresses get redirected
towards the master MDIO bus.
Fixes:
461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jarod Wilson [Mon, 30 Mar 2020 15:22:19 +0000 (11:22 -0400)]
ipv6: don't auto-add link-local address to lag ports
[ Upstream commit
744fdc8233f6aa9582ce08a51ca06e59796a3196 ]
Bonding slave and team port devices should not have link-local addresses
automatically added to them, as it can interfere with openvswitch being
able to properly add tc ingress.
Basic reproducer, courtesy of Marcelo:
$ ip link add name bond0 type bond
$ ip link set dev ens2f0np0 master bond0
$ ip link set dev ens2f1np2 master bond0
$ ip link set dev bond0 up
$ ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens2f0np0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc
mq master bond0 state UP group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
5: ens2f1np2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc
mq master bond0 state DOWN group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
11: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20f:53ff:fe2f:ea40/64 scope link
valid_lft forever preferred_lft forever
(above trimmed to relevant entries, obviously)
$ sysctl net.ipv6.conf.ens2f0np0.addr_gen_mode=0
net.ipv6.conf.ens2f0np0.addr_gen_mode = 0
$ sysctl net.ipv6.conf.ens2f1np2.addr_gen_mode=0
net.ipv6.conf.ens2f1np2.addr_gen_mode = 0
$ ip a l ens2f0np0
2: ens2f0np0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc
mq master bond0 state UP group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative
valid_lft forever preferred_lft forever
$ ip a l ens2f1np2
5: ens2f1np2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc
mq master bond0 state DOWN group default qlen 1000
link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative
valid_lft forever preferred_lft forever
Looks like addrconf_sysctl_addr_gen_mode() bypasses the original "is
this a slave interface?" check added by commit
c2edacf80e15, and
results in an address getting added, while w/the proposed patch added,
no address gets added. This simply adds the same gating check to another
code path, and thus should prevent the same devices from erroneously
obtaining an ipv6 link-local address.
Fixes:
d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode")
Reported-by: Moshe Levi <moshele@mellanox.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: Marcelo Ricardo Leitner <mleitner@redhat.com>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herat Ramani [Tue, 31 Mar 2020 19:46:09 +0000 (01:16 +0530)]
cxgb4: fix MPS index overwrite when setting MAC address
[ Upstream commit
41aa8561ca3fc5748391f08cc5f3e561923da52c ]
cxgb4_update_mac_filt() earlier requests firmware to add a new MAC
address into MPS TCAM. The MPS TCAM index returned by firmware is
stored in pi->xact_addr_filt. However, the saved MPS TCAM index gets
overwritten again with the return value of cxgb4_update_mac_filt(),
which is wrong.
When trying to update to another MAC address later, the wrong MPS TCAM
index is sent to firmware, which causes firmware to return error,
because it's not the same MPS TCAM index that firmware had sent
earlier to driver.
So, fix by removing the wrong overwrite being done after call to
cxgb4_update_mac_filt().
Fixes:
3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()")
Signed-off-by: Herat Ramani <herat@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Tue, 7 Apr 2020 22:01:42 +0000 (00:01 +0200)]
net: phy: realtek: fix handling of RTL8105e-integrated PHY
[ No applicable upstream commit ]
After the referenced fix it turned out that one particular RTL8168
chip version (RTL8105e) does not work on 5.4 because no dedicated PHY
driver exists. Adding this PHY driver was done for fixing a different
issue for versions from 5.5 already. I re-send the same change for 5.4
because the commit message differs.
Fixes:
2e8c339b4946 ("r8169: fix PHY driver check on platforms w/o module softdeps")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 8 Apr 2020 07:08:47 +0000 (09:08 +0200)]
Linux 5.4.31
Randy Dunlap [Thu, 2 Apr 2020 04:10:58 +0000 (21:10 -0700)]
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
commit
aa9f7d5172fac9bf1f09e678c35e287a40a7b7dd upstream.
Using an empty (malformed) nodelist that is not caught during mount option
parsing leads to a stack-out-of-bounds access.
The option string that was used was: "mpol=prefer:,". However,
MPOL_PREFERRED requires a single node number, which is not being provided
here.
Add a check that 'nodes' is not empty after parsing for MPOL_PREFERRED's
nodeid.
Fixes:
095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display")
Reported-by: Entropy Moe <3ntr0py1337@gmail.com>
Reported-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Link: http://lkml.kernel.org/r/89526377-7eb6-b662-e1d8-4430928abde9@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Jordan [Tue, 3 Dec 2019 19:31:11 +0000 (14:31 -0500)]
padata: always acquire cpu_hotplug_lock before pinst->lock
commit
38228e8848cd7dd86ccb90406af32de0cad24be3 upstream.
lockdep complains when padata's paths to update cpumasks via CPU hotplug
and sysfs are both taken:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask
======================================================
WARNING: possible circular locking dependency detected
5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted
------------------------------------------------------
bash/205 is trying to acquire lock:
ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120
but task is already holding lock:
ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120
which lock already depends on the new lock.
padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent
order. Which should be first? CPU hotplug calls into padata with
cpu_hotplug_lock already held, so it should have priority.
Fixes:
6751fb3c0e0c ("padata: Use get_online_cpus/put_online_cpus")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amritha Nambiar [Mon, 24 Feb 2020 18:56:00 +0000 (10:56 -0800)]
net: Fix Tx hash bound checking
commit
6e11d1578fba8d09d03a286740ffcf336d53928c upstream.
Fixes the lower and upper bounds when there are multiple TCs and
traffic is on the the same TC on the same device.
The lower bound is represented by 'qoffset' and the upper limit for
hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue
mapping when there are multiple TCs, as the queue indices for upper TCs
will be offset by 'qoffset'.
v2: Fixed commit description based on comments.
Fixes:
1b837d489e06 ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash")
Fixes:
eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 26 Feb 2020 13:21:22 +0000 (16:21 +0300)]
i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
commit
04bbb97d1b732b2d197f103c5818f5c214a4cf81 upstream.
Martin noticed that nct6775 driver does not load properly on his system
in v5.4+ kernels. The issue was bisected to commit
b84398d6d7f9 ("i2c:
i801: Use iTCO version 6 in Cannon Lake PCH and beyond") but it is
likely not the culprit because the faulty code has been in the driver
already since commit
9424693035a5 ("i2c: i801: Create iTCO device on
newer Intel PCHs"). So more likely some commit that added PCI IDs of
recent chipsets made the driver to create the iTCO_wdt device on Martins
system.
The issue was debugged to be PCI configuration access to the PMC device
that is not present. This returns all 1's when read and this caused the
iTCO_wdt driver to accidentally request resourses used by nct6775.
It turns out that the SMI resource is only required for some ancient
systems, not the ones supported by this driver. For this reason do not
populate the SMI resource at all and drop all the related code. The
driver now always populates the main I/O resource and only in case of SPT
(Intel Sunrisepoint) compatible devices it adds another resource for the
NO_REBOOT bit. These two resources are of different types so
platform_get_resource() used by the iTCO_wdt driver continues to find
the both resources at index 0.
Link: https://lore.kernel.org/linux-hwmon/CAM1AHpQ4196tyD=HhBu-2donSsuogabkfP03v1YF26Q7_BgvgA@mail.gmail.com/
Fixes:
9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs")
[wsa: complete fix needs all of http://patchwork.ozlabs.org/project/linux-i2c/list/?series=160959&state=*]
Reported-by: Martin Volf <martin.volf.42@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 26 Feb 2020 13:21:21 +0000 (16:21 +0300)]
watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
commit
e42b0c24389d5a1602e77db4f6def0d5a19e3e43 upstream.
The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either
turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version
(or higher), and when legacy iTCO_vendorsupport is set. Modify the driver
so that ICH_RES_IO_SMI is optional if the two conditions are not met.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 26 Feb 2020 13:21:20 +0000 (16:21 +0300)]
watchdog: iTCO_wdt: Export vendorsupport
commit
7ca6ee38909109751bfab79e9f6c570d2ed258c6 upstream.
In preparation for making ->smi_res optional the iTCO_wdt driver needs
to know whether vendorsupport is being set to non-zero. For this reason
export the variable.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neal Cardwell [Sat, 22 Feb 2020 16:21:15 +0000 (11:21 -0500)]
tcp: fix TFO SYNACK undo to avoid double-timestamp-undo
commit
dad8cea7add96a353fa1898b5ccefbb72da66f29 upstream.
In a rare corner case the new logic for undo of SYNACK RTO could
result in triggering the warning in tcp_fastretrans_alert() that says:
WARN_ON(tp->retrans_out != 0);
The warning looked like:
WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270
The sequence that tickles this bug is:
- Fast Open server receives TFO SYN with data, sends SYNACK
- (client receives SYNACK and sends ACK, but ACK is lost)
- server app sends some data packets
- (N of the first data packets are lost)
- server receives client ACK that has a TS ECR matching first SYNACK,
and also SACKs suggesting the first N data packets were lost
- server performs TS undo of SYNACK RTO, then immediately
enters recovery
- buggy behavior then performed a *second* undo that caused
the connection to be in CA_Open with retrans_out != 0
Basically, the incoming ACK packet with SACK blocks causes us to first
undo the cwnd reduction from the SYNACK RTO, but then immediately
enters fast recovery, which then makes us eligible for undo again. And
then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo
using a "mash-up" of state from two different loss recovery phases: it
uses the timestamp info from the ACK of the original SYNACK, and the
undo_marker from the fast recovery.
This fix refines the logic to only invoke the tcp_try_undo_loss()
inside tcp_rcv_synrecv_state_fastopen() if the connection is still in
CA_Loss. If peer SACKs triggered fast recovery, then
tcp_rcv_synrecv_state_fastopen() can't safely undo.
Fixes:
794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Fri, 20 Mar 2020 20:02:10 +0000 (16:02 -0400)]
IB/hfi1: Ensure pq is not left on waitlist
commit
9a293d1e21a6461a11b4217b155bf445e57f4131 upstream.
The following warning can occur when a pq is left on the dmawait list and
the pq is then freed:
WARNING: CPU: 47 PID: 3546 at lib/list_debug.c:29 __list_add+0x65/0xc0
list_add corruption. next->prev should be prev (
ffff939228da1880), but was
ffff939cabb52230. (next=
ffff939cabb52230).
Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd ast ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev drm_panel_orientation_quirks i2c_i801 mei_me lpc_ich mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables
nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci libahci i2c_algo_bit dca libata ptp pps_core crc32c_intel [last unloaded: i2c_algo_bit]
CPU: 47 PID: 3546 Comm: wrf.exe Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.41.1.el7.x86_64 #1
Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019
Call Trace:
[<
ffffffff91f65ac0>] dump_stack+0x19/0x1b
[<
ffffffff91898b78>] __warn+0xd8/0x100
[<
ffffffff91898bff>] warn_slowpath_fmt+0x5f/0x80
[<
ffffffff91a1dabe>] ? ___slab_alloc+0x24e/0x4f0
[<
ffffffff91b97025>] __list_add+0x65/0xc0
[<
ffffffffc03926a5>] defer_packet_queue+0x145/0x1a0 [hfi1]
[<
ffffffffc0372987>] sdma_check_progress+0x67/0xa0 [hfi1]
[<
ffffffffc03779d2>] sdma_send_txlist+0x432/0x550 [hfi1]
[<
ffffffff91a20009>] ? kmem_cache_alloc+0x179/0x1f0
[<
ffffffffc0392973>] ? user_sdma_send_pkts+0xc3/0x1990 [hfi1]
[<
ffffffffc0393e3a>] user_sdma_send_pkts+0x158a/0x1990 [hfi1]
[<
ffffffff918ab65e>] ? try_to_del_timer_sync+0x5e/0x90
[<
ffffffff91a3fe1a>] ? __check_object_size+0x1ca/0x250
[<
ffffffffc0395546>] hfi1_user_sdma_process_request+0xd66/0x1280 [hfi1]
[<
ffffffffc034e0da>] hfi1_aio_write+0xca/0x120 [hfi1]
[<
ffffffff91a4245b>] do_sync_readv_writev+0x7b/0xd0
[<
ffffffff91a4409e>] do_readv_writev+0xce/0x260
[<
ffffffff918df69f>] ? pick_next_task_fair+0x5f/0x1b0
[<
ffffffff918db535>] ? sched_clock_cpu+0x85/0xc0
[<
ffffffff91f6b16a>] ? __schedule+0x13a/0x860
[<
ffffffff91a442c5>] vfs_writev+0x35/0x60
[<
ffffffff91a4447f>] SyS_writev+0x7f/0x110
[<
ffffffff91f78ddb>] system_call_fastpath+0x22/0x27
The issue happens when wait_event_interruptible_timeout() returns a value
<= 0.
In that case, the pq is left on the list. The code continues sending
packets and potentially can complete the current request with the pq still
on the dmawait list provided no descriptor shortage is seen.
If the pq is torn down in that state, the sdma interrupt handler could
find the now freed pq on the list with list corruption or memory
corruption resulting.
Fix by adding a flush routine to ensure that the pq is never on a list
after processing a request.
A follow-up patch series will address issues with seqlock surfaced in:
https://lore.kernel.org/r/
20200320003129.GP20941@ziepe.ca
The seqlock use for sdma will then be converted to a spin lock since the
list_empty() doesn't need the protection afforded by the sequence lock
currently in use.
Fixes:
a0d406934a46 ("staging/rdma/hfi1: Add page lock limit check for SDMA requests")
Link: https://lore.kernel.org/r/20200320200200.23203.37777.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 13 Mar 2020 17:30:27 +0000 (17:30 +0000)]
rxrpc: Fix sendmsg(MSG_WAITALL) handling
commit
498b577660f08cef5d9e78e0ed6dcd4c0939e98c upstream.
Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the
timeout for when a signal occurs up to at least two jiffies as a 1 jiffy
timeout may end up being effectively 0 if jiffies wraps at the wrong time.
Fixes:
bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luca Coelho [Fri, 6 Mar 2020 13:16:25 +0000 (15:16 +0200)]
iwlwifi: dbg: don't abort if sending DBGC_SUSPEND_RESUME fails
commit
699b760bd29edba736590fffef7654cb079c753e upstream.
If the firmware is in a bad state or not initialized fully, sending
the DBGC_SUSPEND_RESUME command fails but we can still collect logs.
Instead of aborting the entire dump process, simply ignore the error.
By removing the last callpoint that was checking the return value, we
can also convert the function to return void.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes:
576058330f2d ("iwlwifi: dbg: support debug recording suspend resume command")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151129.dcec37b2efd4.I8dcd190431d110a6a0e88095ce93591ccfb3d78d@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mordechay Goodstein [Fri, 6 Mar 2020 13:16:24 +0000 (15:16 +0200)]
iwlwifi: yoyo: don't add TLV offset when reading FIFOs
commit
a5688e600e78f9fc68102bf0fe5c797fc2826abe upstream.
The TLV offset is only used to read registers, while the offset used for
the FIFO addresses are hard coded in the driver and not given by the
TLV.
If we try to apply the TLV offset when reading the FIFOs, we'll read
from invalid addresses, causing the driver to hang.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes:
8d7dea25ada7 ("iwlwifi: dbg_ini: implement Rx fifos dump")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151129.fbab869c26fa.I4ddac20d02f9bce41855a816aa6855c89bc3874e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mordechay Goodstein [Fri, 6 Mar 2020 13:16:22 +0000 (15:16 +0200)]
iwlwifi: consider HE capability when setting LDPC
commit
cb377dfda1755b3bc01436755d866c8e5336a762 upstream.
The AP may set the LDPC capability only in HE (IEEE80211_HE_PHY_CAP1),
but we were checking it only in the HT capabilities.
If we don't use this capability when required, the DSP gets the wrong
configuration in HE and doesn't work properly.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes:
befebbb30af0 ("iwlwifi: rs: consider LDPC capability in case of HE")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151128.492d167c1a25.I1ad1353dbbf6c99ae57814be750f41a1c9f7f4ac@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tariq Toukan [Mon, 24 Feb 2020 11:56:53 +0000 (13:56 +0200)]
net/mlx5e: kTLS, Fix wrong value in record tracker enum
commit
f28ca65efa87b3fb8da3d69ca7cb1ebc0448de66 upstream.
Fix to match the HW spec: TRACKING state is 1, SEARCHING is 2.
No real issue for now, as these values are not currently used.
Fixes:
d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bibby Hsieh [Fri, 14 Feb 2020 04:35:45 +0000 (12:35 +0800)]
soc: mediatek: knows_txdone needs to be set in Mediatek CMDQ helper
commit
ce35e21d82bcac8b3fd5128888f9e233f8444293 upstream.
Mediatek CMDQ driver have a mechanism to do TXDONE_BY_ACK,
so we should set knows_txdone.
Fixes:
576f1b4bc802 ("soc: mediatek: Add Mediatek CMDQ helper")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geoffrey Allott [Thu, 19 Mar 2020 14:00:48 +0000 (14:00 +0000)]
ALSA: hda/ca0132 - Add Recon3Di quirk to handle integrated sound on EVGA X99 Classified motherboard
commit
e9097e47e349b747dee50f935216de0ffb662962 upstream.
I have a system which has an EVGA X99 Classified motherboard. The pin
assignments for the HD Audio controller are not correct under Linux.
Windows 10 works fine and informs me that it's using the Recon3Di
driver, and on Linux, `cat
/sys/class/sound/card0/device/subsystem_{vendor,device}` yields
0x3842
0x1038
This patch adds a corresponding entry to the quirk list.
Signed-off-by: Geoffrey Allott <geoffrey@allott.email>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a6cd56b678c00ce2db3685e4278919f2584f8244.camel@allott.email
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Snitzer [Thu, 2 Apr 2020 23:36:26 +0000 (19:36 -0400)]
Revert "dm: always call blk_queue_split() in dm_process_bio()"
commit
120c9257f5f19e5d1e87efcbb5531b7cd81b7d74 upstream.
This reverts commit
effd58c95f277744f75d6e08819ac859dbcbd351.
blk_queue_split() is causing excessive IO splitting -- because
blk_max_size_offset() depends on 'chunk_sectors' limit being set and
if it isn't (as is the case for DM targets!) it falls back to
splitting on a 'max_sectors' boundary regardless of offset.
"Fix" this by reverting back to _not_ using blk_queue_split() in
dm_process_bio() for normal IO (reads and writes). Long-term fix is
still TBD but it should focus on training blk_max_size_offset() to
call into a DM provided hook (to call DM's max_io_len()).
Test results from simple misaligned IO test on 4-way dm-striped device
with chunksize of 128K and stripesize of 512K:
xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev
before this revert:
253,0 21 1 0.
000000000 2206 Q R 224 + 4072 [xfs_io]
253,0 21 2 0.
000008267 2206 X R 224 / 480 [xfs_io]
253,0 21 3 0.
000010530 2206 X R 224 / 256 [xfs_io]
253,0 21 4 0.
000027022 2206 X R 480 / 736 [xfs_io]
253,0 21 5 0.
000028751 2206 X R 480 / 512 [xfs_io]
253,0 21 6 0.
000033323 2206 X R 736 / 992 [xfs_io]
253,0 21 7 0.
000035130 2206 X R 736 / 768 [xfs_io]
253,0 21 8 0.
000039146 2206 X R 992 / 1248 [xfs_io]
253,0 21 9 0.
000040734 2206 X R 992 / 1024 [xfs_io]
253,0 21 10 0.
000044694 2206 X R 1248 / 1504 [xfs_io]
253,0 21 11 0.
000046422 2206 X R 1248 / 1280 [xfs_io]
253,0 21 12 0.
000050376 2206 X R 1504 / 1760 [xfs_io]
253,0 21 13 0.
000051974 2206 X R 1504 / 1536 [xfs_io]
253,0 21 14 0.
000055881 2206 X R 1760 / 2016 [xfs_io]
253,0 21 15 0.
000057462 2206 X R 1760 / 1792 [xfs_io]
253,0 21 16 0.
000060999 2206 X R 2016 / 2272 [xfs_io]
253,0 21 17 0.
000062489 2206 X R 2016 / 2048 [xfs_io]
253,0 21 18 0.
000066133 2206 X R 2272 / 2528 [xfs_io]
253,0 21 19 0.
000067507 2206 X R 2272 / 2304 [xfs_io]
253,0 21 20 0.
000071136 2206 X R 2528 / 2784 [xfs_io]
253,0 21 21 0.
000072764 2206 X R 2528 / 2560 [xfs_io]
253,0 21 22 0.
000076185 2206 X R 2784 / 3040 [xfs_io]
253,0 21 23 0.
000077486 2206 X R 2784 / 2816 [xfs_io]
253,0 21 24 0.
000080885 2206 X R 3040 / 3296 [xfs_io]
253,0 21 25 0.
000082316 2206 X R 3040 / 3072 [xfs_io]
253,0 21 26 0.
000085788 2206 X R 3296 / 3552 [xfs_io]
253,0 21 27 0.
000087096 2206 X R 3296 / 3328 [xfs_io]
253,0 21 28 0.
000093469 2206 X R 3552 / 3808 [xfs_io]
253,0 21 29 0.
000095186 2206 X R 3552 / 3584 [xfs_io]
253,0 21 30 0.
000099228 2206 X R 3808 / 4064 [xfs_io]
253,0 21 31 0.
000101062 2206 X R 3808 / 3840 [xfs_io]
253,0 21 32 0.
000104956 2206 X R 4064 / 4096 [xfs_io]
253,0 21 33 0.
001138823 0 C R 4096 + 200 [0]
after this revert:
253,0 18 1 0.
000000000 4430 Q R 224 + 3896 [xfs_io]
253,0 18 2 0.
000018359 4430 X R 224 / 256 [xfs_io]
253,0 18 3 0.
000028898 4430 X R 256 / 512 [xfs_io]
253,0 18 4 0.
000033535 4430 X R 512 / 768 [xfs_io]
253,0 18 5 0.
000065684 4430 X R 768 / 1024 [xfs_io]
253,0 18 6 0.
000091695 4430 X R 1024 / 1280 [xfs_io]
253,0 18 7 0.
000098494 4430 X R 1280 / 1536 [xfs_io]
253,0 18 8 0.
000114069 4430 X R 1536 / 1792 [xfs_io]
253,0 18 9 0.
000129483 4430 X R 1792 / 2048 [xfs_io]
253,0 18 10 0.
000136759 4430 X R 2048 / 2304 [xfs_io]
253,0 18 11 0.
000152412 4430 X R 2304 / 2560 [xfs_io]
253,0 18 12 0.
000160758 4430 X R 2560 / 2816 [xfs_io]
253,0 18 13 0.
000183385 4430 X R 2816 / 3072 [xfs_io]
253,0 18 14 0.
000190797 4430 X R 3072 / 3328 [xfs_io]
253,0 18 15 0.
000197667 4430 X R 3328 / 3584 [xfs_io]
253,0 18 16 0.
000218751 4430 X R 3584 / 3840 [xfs_io]
253,0 18 17 0.
000226005 4430 X R 3840 / 4096 [xfs_io]
253,0 18 18 0.
000250404 4430 Q R 4120 + 176 [xfs_io]
253,0 18 19 0.
000847708 0 C R 4096 + 24 [0]
253,0 18 20 0.
000855783 0 C R 4120 + 176 [0]
Fixes:
effd58c95f27774 ("dm: always call blk_queue_split() in dm_process_bio()")
Cc: stable@vger.kernel.org
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 23 Feb 2020 15:32:08 +0000 (16:32 +0100)]
power: supply: axp288_charger: Add special handling for HP Pavilion x2 10
commit
9c80662a74cd2a5d1113f5c69d027face963a556 upstream.
Some HP Pavilion x2 10 models use an AXP288 for charging and fuel-gauge.
We use a native power_supply / PMIC driver in this case, because on most
models with an AXP288 the ACPI AC / Battery code is either completely
missing or relies on custom / proprietary ACPI OpRegions which Linux
does not implement.
The native drivers mostly work fine, but there are 2 problems:
1. These model uses a Type-C connector for charging which the AXP288 does
not support. As long as a Type-A charger (which uses the USB data pins for
charger type detection) is used everything is fine. But if a Type-C
charger is used (such as the charger shipped with the device) then the
charger is not recognized.
So we end up slowly discharging the device even though a charger is
connected, because we are limiting the current from the charger to 500mA.
To make things worse this happens with the device's official charger.
Looking at the ACPI tables HP has "solved" the problem of the AXP288 not
being able to recognize Type-C chargers by simply always programming the
input-current-limit at 3000mA and relying on a Vhold setting of 4.7V
(normally 4.4V) to limit the current intake if the charger cannot handle
this.
2. If no charger is connected when the machine boots then it boots with the
vbus-path disabled. On other devices this is done when a 5V boost converter
is active to avoid the PMIC trying to charge from the 5V boost output.
This is done when an OTG host cable is inserted and the ID pin on the
micro-B receptacle is pulled low, the ID pin has an ACPI event handler
associated with it which re-enables the vbus-path when the ID pin is pulled
high when the OTG cable is removed. The Type-C connector has no ID pin,
there is no ID pin handler and there appears to be no 5V boost converter,
so we end up not charging because the vbus-path is disabled, until we
unplug the charger which automatically clears the vbus-path disable bit and
then on the second plug-in of the adapter we start charging.
The HP Pavilion x2 10 models with an AXP288 do have mostly working ACPI
AC / Battery code which does not rely on custom / proprietary ACPI
OpRegions. So one possible solution would be to blacklist the AXP288
native power_supply drivers and add the HP Pavilion x2 10 with AXP288
DMI ids to the list of devices which should use the ACPI AC / Battery
code even though they have an AXP288 PMIC. This would require changes to
4 files: drivers/acpi/ac.c, drivers/power/supply/axp288_charger.c,
drivers/acpi/battery.c and drivers/power/supply/axp288_fuel_gauge.c.
Beside needing adding the same DMI matches to 4 different files, this
approach also triggers problem 2. from above, but then when suspended,
during suspend the machine will not wakeup because the vbus path is
disabled by the AML code when not charging, so the Vbus low-to-high
IRQ is not triggered, the CPU never wakes up and the device does not
charge even though the user likely things it is charging, esp. since
the charge status LED is directly coupled to an adapter being plugged
in and does not reflect actual charging.
This could be worked by enabling vbus-path explicitly from say the
axp288_charger driver's suspend handler.
So neither situation is ideal, in both cased we need to explicitly enable
the vbus-path to work around different variants of problem 2 above, this
requires a quirk in the axp288_charger code.
If we go the route of using the ACPI AC / Battery drivers then we need
modifications to 3 other drivers; and we need to partially disable the
axp288_charger code, while at the same time keeping it around to enable
vbus-path on suspend.
OTOH we can copy the hardcoding of 3A input-current-limit (we never touch
Vhold, so that would stay at 4.7V) to the axp288_charger code, which needs
changes regardless, then we concentrate all special handling of this
interesting device model in the axp288_charger code. That is what this
commit does.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1791098
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 23 Mar 2020 21:59:39 +0000 (22:59 +0100)]
extcon: axp288: Add wakeup support
commit
9c94553099efb2ba873cbdddfd416a8a09d0e5f1 upstream.
On devices with an AXP288, we need to wakeup from suspend when a charger
is plugged in, so that we can do charger-type detection and so that the
axp288-charger driver, which listens for our extcon events, can configure
the input-current-limit accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Johnson [Tue, 10 Mar 2020 13:22:52 +0000 (13:22 +0000)]
nvmem: check for NULL reg_read and reg_write before dereferencing
commit
3c91ef69a3e94f78546b246225ed573fbf1735b4 upstream.
Return -EPERM if reg_read is NULL in bin_attr_nvmem_read() or if
reg_write is NULL in bin_attr_nvmem_write().
This prevents NULL dereferences such as the one described in
03cd45d2e219 ("thunderbolt: Prevent crash if non-active NVMem file is
read")
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Tue, 24 Mar 2020 21:07:30 +0000 (23:07 +0200)]
mei: me: add cedar fork device ids
commit
99397d33b763dc554d118aaa38cc5abc6ce985de upstream.
Add Cedar Fork (CDF) device ids, those belongs to the cannon point family.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200324210730.17672-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugene Syromiatnikov [Tue, 24 Mar 2020 04:22:13 +0000 (05:22 +0100)]
coresight: do not use the BIT() macro in the UAPI header
commit
9b6eaaf3db5e5888df7bca7fed7752a90f7fd871 upstream.
The BIT() macro definition is not available for the UAPI headers
(moreover, it can be defined differently in the user space); replace
its usage with the _BITUL() macro that is defined in <linux/const.h>.
Fixes:
237483aa5cf4 ("coresight: stm: adding driver for CoreSight STM component")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200324042213.GA10452@asgard.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kelsey Skunberg [Wed, 25 Mar 2020 15:17:08 +0000 (09:17 -0600)]
PCI: sysfs: Revert "rescan" file renames
commit
bd641fd8303a371e789e924291086268256766b0 upstream.
We changed these sysfs filenames:
.../pci_bus/<domain:bus>/rescan -> .../pci_bus/<domain:bus>/bus_rescan
.../<domain:bus:dev.fn>/rescan -> .../<domain:bus:dev.fn>/dev_rescan
and Ruslan reported [1] that this broke a userspace application.
Revert these name changes so both files are named "rescan" again.
Note that we have to use __ATTR() to assign custom C symbols, i.e.,
"struct device_attribute <symbol>".
[1] https://lore.kernel.org/r/CAB=otbSYozS-ZfxB0nCiNnxcbqxwrHOSYxJJtDKa63KzXbXgpw@mail.gmail.com
[bhelgaas: commit log, use __ATTR() both places so we don't have to rename
the attributes]
Fixes:
8bdfa145f582 ("PCI: sysfs: Define device attributes with DEVICE_ATTR*()")
Fixes:
4e2b79436e4f ("PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()")
Link: https://lore.kernel.org/r/20200325151708.32612-1-skunberg.kelsey@gmail.com
Signed-off-by: Kelsey Skunberg <kelsey.skunberg@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kishon Vijay Abraham I [Tue, 17 Mar 2020 10:01:54 +0000 (15:31 +0530)]
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
commit
b2ba9225e0313b1de631a44b7b48c109032bffec upstream.
commit
e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
uses module parameter 'irqtype' in pci_endpoint_test_set_irq()
to check if IRQ vectors of a particular type (MSI or MSI-X or
LEGACY) is already allocated. However with multi-function devices,
'irqtype' will not correctly reflect the IRQ type of the PCI device.
Fix it here by adding 'irqtype' for each PCI device to show the
IRQ type of a particular PCI device.
Fixes:
e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kishon Vijay Abraham I [Tue, 17 Mar 2020 10:01:57 +0000 (15:31 +0530)]
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
commit
6b443e5c80b67a7b8a85b33d052d655ef9064e90 upstream.
Adding more than 10 pci-endpoint-test devices results in
"kobject_add_internal failed for pci-endpoint-test.1 with -EEXIST, don't
try to register things with the same name in the same directory". This
is because commit
2c156ac71c6b ("misc: Add host side PCI driver for PCI
test function device") limited the length of the "name" to 20 characters.
Change the length of the name to 24 in order to support upto 10000
pci-endpoint-test devices.
Fixes:
2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Thu, 26 Mar 2020 03:26:18 +0000 (11:26 +0800)]
misc: rtsx: set correct pcr_ops for rts522A
commit
10cea23b6aae15e8324f4101d785687f2c514fe5 upstream.
rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.
Fixes:
ce6a5acc9387 ("mfd: rtsx: Add support for rts522A")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Tue, 28 Jan 2020 22:14:57 +0000 (14:14 -0800)]
brcmfmac: abort and release host after error
[ Upstream commit
863844ee3bd38219c88e82966d1df36a77716f3e ]
With commit
216b44000ada ("brcmfmac: Fix use after free in
brcmf_sdio_readframes()") applied, we see locking timeouts in
brcmf_sdio_watchdog_thread().
brcmfmac: brcmf_escan_timeout: timer expired
INFO: task brcmf_wdog/mmc1:621 blocked for more than 120 seconds.
Not tainted 4.19.94-07984-g24ff99a0f713 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
brcmf_wdog/mmc1 D 0 621 2 0x00000000 last_sleep:
2440793077. last_runnable:
2440766827
[<
c0aa1e60>] (__schedule) from [<
c0aa2100>] (schedule+0x98/0xc4)
[<
c0aa2100>] (schedule) from [<
c0853830>] (__mmc_claim_host+0x154/0x274)
[<
c0853830>] (__mmc_claim_host) from [<
bf10c5b8>] (brcmf_sdio_watchdog_thread+0x1b0/0x1f8 [brcmfmac])
[<
bf10c5b8>] (brcmf_sdio_watchdog_thread [brcmfmac]) from [<
c02570b8>] (kthread+0x178/0x180)
In addition to restarting or exiting the loop, it is also necessary to
abort the command and to release the host.
Fixes:
216b44000ada ("brcmfmac: Fix use after free in brcmf_sdio_readframes()")
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: franky.lin@broadcom.com
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Jordan [Mon, 10 Feb 2020 18:11:00 +0000 (13:11 -0500)]
padata: fix uninitialized return value in padata_replace()
[ Upstream commit
41ccdbfd5427bbbf3ed58b16750113b38fad1780 ]
According to Geert's report[0],
kernel/padata.c: warning: 'err' may be used uninitialized in this
function [-Wuninitialized]: => 539:2
Warning is seen only with older compilers on certain archs. The
runtime effect is potentially returning garbage down the stack when
padata's cpumasks are modified before any pcrypt requests have run.
Simplest fix is to initialize err to the success value.
[0] http://lkml.kernel.org/r/
20200210135506.11536-1-geert@linux-m68k.org
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes:
bbefa1dd6a6d ("crypto: pcrypt - Avoid deadlock by using per-instance padata queues")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Wilcox (Oracle) [Fri, 31 Jan 2020 10:07:55 +0000 (05:07 -0500)]
XArray: Fix xa_find_next for large multi-index entries
[ Upstream commit
bd40b17ca49d7d110adf456e647701ce74de2241 ]
Coverity pointed out that xas_sibling() was shifting xa_offset without
promoting it to an unsigned long first, so the shift could cause an
overflow and we'd get the wrong answer. The fix is obvious, and the
new test-case provokes UBSAN to report an error:
runtime error: shift exponent 60 is too large for 32-bit type 'int'
Fixes:
19c30f4dd092 ("XArray: Fix xa_find_after with multi-index entries")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tariq Toukan [Thu, 20 Feb 2020 11:40:24 +0000 (13:40 +0200)]
net/mlx5e: kTLS, Fix TCP seq off-by-1 issue in TX resync flow
[ Upstream commit
56917766def72f5afdf4235adb91b6897ff26d9d ]
We have an off-by-1 issue in the TCP seq comparison.
The last sequence number that belongs to the TCP packet's payload
is not "start_seq + len", but one byte before it.
Fix it so the 'ends_before' is evaluated properly.
This fixes a bug that results in error completions in the
kTLS HW offload flows.
Fixes:
ffbd9ca94e2e ("net/mlx5e: kTLS, Fix corner-case checks in TX resync flow")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Len Brown [Fri, 20 Mar 2020 03:24:17 +0000 (23:24 -0400)]
tools/power turbostat: Fix 32-bit capabilities warning
[ Upstream commit
fcaa681c03ea82193e60d7f2cdfd94fbbcd4cae9 ]
warning: `turbostat' uses 32-bit capabilities (legacy support in use)
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Len Brown [Thu, 19 Mar 2020 22:26:05 +0000 (18:26 -0400)]
tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks
[ Upstream commit
1f81c5efc020314b2db30d77efe228b7e117750d ]
Some Chromebook BIOS' do not export an ACPI LPIT, which is how
Linux finds the residency counter for CPU and SYSTEM low power states,
that is exports in /sys/devices/system/cpu/cpuidle/*residency_us
When these sysfs attributes are missing, check the debugfs attrubte
from the pmc_core driver, which accesses the same counter value.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Len Brown [Thu, 19 Mar 2020 22:33:12 +0000 (18:33 -0400)]
tools/power turbostat: Fix gcc build warnings
[ Upstream commit
d8d005ba6afa502ca37ced5782f672c4d2fc1515 ]
Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
[-Wstringop-truncation]
reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Zhu [Wed, 18 Mar 2020 21:09:05 +0000 (17:09 -0400)]
drm/amdgpu: fix typo for vcn1 idle check
[ Upstream commit
acfc62dc68770aa665cc606891f6df7d6d1e52c0 ]
fix typo for vcn1 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eugeniy Paltsev [Mon, 16 Mar 2020 11:25:19 +0000 (14:25 +0300)]
initramfs: restore default compression behavior
[ Upstream commit
785d74ec3bbf26ac7f6e92e6e96a259aec0f107a ]
Even though INITRAMFS_SOURCE kconfig option isn't set in most of
defconfigs it is used (set) extensively by various build systems.
Commit
f26661e12765 ("initramfs: make initramfs compression choice
non-optional") has changed default compression mode. Previously we
compress initramfs using available compression algorithm. Now
we don't use any compression at all by default.
It significantly increases the image size in case of build system
chooses embedded initramfs. Initially I faced with this issue while
using buildroot.
As of today it's not possible to set preferred compression mode
in target defconfig as this option depends on INITRAMFS_SOURCE
being set. Modification of all build systems either doesn't look
like good option.
Let's instead rewrite initramfs compression mode choices list
the way that "INITRAMFS_COMPRESSION_NONE" will be the last option
in the list. In that case it will be chosen only if all other
options (which implements any compression) are not available.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gerd Hoffmann [Fri, 13 Mar 2020 08:41:52 +0000 (09:41 +0100)]
drm/bochs: downgrade pci_request_region failure from error to warning
[ Upstream commit
8c34cd1a7f089dc03933289c5d4a4d1489549828 ]
Shutdown of firmware framebuffer has a bunch of problems. Because
of this the framebuffer region might still be reserved even after
drm_fb_helper_remove_conflicting_pci_framebuffers() returned.
Don't consider pci_request_region() failure for the framebuffer
region as fatal error to workaround this issue.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Kleiner [Fri, 28 Feb 2020 21:36:07 +0000 (22:36 +0100)]
drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
[ Upstream commit
dec9de2ada523b344eb2428abfedf9d6cd0a0029 ]
This fixes a problem found on the MacBookPro 2017 Retina panel:
The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2
aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.
This restricts the panel to 8 bpc, not providing the full
color depth of the panel on Linux <= 5.5. Additionally, commit
'
4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")'
introduced into Linux 5.6-rc1 will unclamp panel depth to
its full 10 bpc, thereby requiring a eDP bandwidth for all
modes that exceeds the bandwidth available and causes all modes
to fail validation -> No modes for the laptop panel -> failure
to set any mode -> Panel goes dark.
This patch adds a quirk specific to the MBP 2017 15" Retina
panel to override reported max link rate to the correct maximum
of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display
precision.
Please apply for Linux 5.6+ to avoid regressing Apple MBP panel
support.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Tue, 10 Mar 2020 10:12:49 +0000 (19:12 +0900)]
kconfig: introduce m32-flag and m64-flag
[ Upstream commit
8cc4fd73501d9f1370c3eebb70cfe8cc9e24062b ]
When a compiler supports multiple architectures, some compiler features
can be dependent on the target architecture.
This is typical for Clang, which supports multiple LLVM backends.
Even for GCC, we need to take care of biarch compiler cases.
It is not a problem when we evaluate cc-option in Makefiles because
cc-option is tested against the flag in question + $(KBUILD_CFLAGS).
The cc-option in Kconfig, on the other hand, does not accumulate
tested flags. Due to this simplification, it could potentially test
cc-option against a different target.
At first, Kconfig always evaluated cc-option against the host
architecture.
Since commit
e8de12fb7cde ("kbuild: Check for unknown options with
cc-option usage in Kconfig and clang"), in case of cross-compiling
with Clang, the target triple is correctly passed to Kconfig.
The case with biarch GCC (and native build with Clang) is still not
handled properly. We need to pass some flags to specify the target
machine bit.
Due to the design, all the macros in Kconfig are expanded in the
parse stage, where we do not know the target bit size yet.
For example, arch/x86/Kconfig allows a user to toggle CONFIG_64BIT.
If a compiler flag -foo depends on the machine bit, it must be tested
twice, one with -m32 and the other with -m64.
However, -m32/-m64 are not always recognized. So, this commits adds
m64-flag and m32-flag macros. They expand to -m32, -m64, respectively
if supported. Or, they expand to an empty string if unsupported.
The typical usage is like this:
config FOO
bool
default $(cc-option,$(m64-flag) -foo) if 64BIT
default $(cc-option,$(m32-flag) -foo)
This is clumsy, but there is no elegant way to handle this in the
current static macro expansion.
There was discussion for static functions vs dynamic functions.
The consensus was to go as far as possible with the static functions.
(https://lkml.org/lkml/2018/3/2/22)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: George Spelvin <lkml@sdf.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Prabhath Sajeepa [Mon, 9 Mar 2020 21:07:53 +0000 (15:07 -0600)]
nvme-rdma: Avoid double freeing of async event data
[ Upstream commit
9134ae2a2546cb96abddcd4469a79c77ee3a4480 ]
The timeout of identify cmd, which is invoked as part of admin queue
creation, can result in freeing of async event data both in
nvme_rdma_timeout handler and error handling path of
nvme_rdma_configure_admin queue thus causing NULL pointer reference.
Call Trace:
? nvme_rdma_setup_ctrl+0x223/0x800 [nvme_rdma]
nvme_rdma_create_ctrl+0x2ba/0x3f7 [nvme_rdma]
nvmf_dev_write+0xa54/0xcc6 [nvme_fabrics]
__vfs_write+0x1b/0x40
vfs_write+0xb2/0x1b0
ksys_write+0x61/0xd0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reviewed-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Thu, 2 Apr 2020 13:11:03 +0000 (15:11 +0200)]
Linux 5.4.30
Madalin Bucur [Mon, 16 Mar 2020 12:05:58 +0000 (14:05 +0200)]
arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode
commit
d79e9d7c1e4ba5f95f2ff3541880c40ea9722212 upstream.
The correct setting for the RGMII ports on LS1046ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit
1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii".
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes:
3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madalin Bucur [Mon, 16 Mar 2020 12:05:57 +0000 (14:05 +0200)]
arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id
commit
4022d808c45277693ea86478fab1f081ebf997e8 upstream.
The correct setting for the RGMII ports on LS1043ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit
1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii_txid".
This issue was not apparent at the time as the PHY driver took the
same action for RGMII_TXID and RGMII_ID back then but it became
visible (RX no longer working) after the above patch.
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes:
bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Tue, 10 Mar 2020 17:47:07 +0000 (01:47 +0800)]
ARM: dts: sun8i: r40: Move AHCI device node based on address order
commit
fe3a04824f75786e39ed74e82fb6cb2534c95fe4 upstream.
When the AHCI device node was added, it was added in the wrong location
in the device tree file. The device nodes should be sorted by register
address.
Move the device node to before EHCI1, where it belongs.
Fixes:
41c64d3318aa ("ARM: dts: sun8i: r40: add sata node")
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arthur Demchenkov [Sun, 8 Mar 2020 19:19:33 +0000 (22:19 +0300)]
ARM: dts: N900: fix onenand timings
commit
0c5220a3c1242c7a2451570ed5f5af69620aac75 upstream.
Commit
a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT")
started using DT specified timings for GPMC, and as a result the
OneNAND stopped working on N900 as we had wrong values in the DT.
Fix by updating the values to bootloader timings that have been tested
to be working on Nokia N900 with OneNAND manufacturers: Samsung,
Numonyx.
Fixes:
a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT")
Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marco Felsch [Thu, 27 Feb 2020 11:02:46 +0000 (12:02 +0100)]
ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
commit
636b45b8efa91db05553840b6c0120d6fa6b94fa upstream.
The current set minimum voltage of 730000µV seems to be wrong. I don't
know the document which specifies that but the imx6qdl datasheets says
that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed,
lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp).
Fixes:
ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Hudson [Thu, 12 Mar 2020 09:03:45 +0000 (09:03 +0000)]
ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
commit
6687c201fdc3139315c2ea7ef96c157672805cdc upstream.
Define the sdhci pinctrl state as "default" so it gets applied
correctly and to match all other RPis.
Fixes:
2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sungbo Eo [Sat, 21 Mar 2020 14:36:53 +0000 (23:36 +0900)]
ARM: dts: oxnas: Fix clear-mask property
commit
deeabb4c1341a12bf8b599e6a2f4cfa4fd74738c upstream.
Disable all rps-irq interrupts during driver initialization to prevent
an accidental interrupt on GIC.
Fixes:
84316f4ef141 ("ARM: boot: dts: Add Oxford Semiconductor OX810SE dtsi")
Fixes:
38d4a53733f5 ("ARM: dts: Add support for OX820 and Pogoplug V3")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
disconnect3d [Mon, 9 Mar 2020 10:48:53 +0000 (11:48 +0100)]
perf map: Fix off by one in strncpy() size argument
commit
db2c549407d4a76563c579e4768f7d6d32afefba upstream.
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes:
eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Lentine <mlentine@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilie Halip [Thu, 19 Mar 2020 21:45:28 +0000 (23:45 +0200)]
arm64: alternative: fix build with clang integrated assembler
commit
6f5459da2b8736720afdbd67c4bd2d1edba7d0e3 upstream.
Building an arm64 defconfig with clang's integrated assembler, this error
occurs:
<instantiation>:2:2: error: unrecognized instruction mnemonic
_ASM_EXTABLE 9999b, 9f
^
arch/arm64/mm/cache.S:50:1: note: while in macro instantiation
user_alt 9f, "dc cvau, x4", "dc civac, x4", 0
^
While GNU as seems fine with case-sensitive macro instantiations, clang
doesn't, so use the actual macro name (_asm_extable) as in the rest of
the file.
Also checked that the generated assembly matches the GCC output.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes:
290622efc76e ("arm64: fix "dc cvau" cache operation on errata-affected core")
Link: https://github.com/ClangBuiltLinux/linux/issues/924
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Tue, 10 Mar 2020 15:19:01 +0000 (16:19 +0100)]
libceph: fix alloc_msg_with_page_vector() memory leaks
commit
e886274031200bb60965c1b9c49b7acda56a93bd upstream.
Make it so that CEPH_MSG_DATA_PAGES data item can own pages,
fixing a bunch of memory leaks for a page vector allocated in
alloc_msg_with_page_vector(). Currently, only watch-notify
messages trigger this allocation, and normally the page vector
is freed either in handle_watch_notify() or by the caller of
ceph_osdc_notify(). But if the message is freed before that
(e.g. if the session faults while reading in the message or
if the notify is stale), we leak the page vector.
This was supposed to be fixed by switching to a message-owned
pagelist, but that never happened.
Fixes:
1907920324f1 ("libceph: support for sending notifies")
Reported-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Fri, 21 Feb 2020 17:10:30 +0000 (09:10 -0800)]
clk: ti: am43xx: Fix clock parent for RTC clock
commit
5f3d9b07b9bb4679922f0b2e2baa770e74a6bbd3 upstream.
Currently enabling clkctrl clock on am4 can fail for RTC as the clock
parent is wrong for RTC.
Fixes:
76a1049b84dd ("clk: ti: am43xx: add new clkctrl data for am43xx")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lkml.kernel.org/r/20200221171030.39326-1-tony@atomide.com
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leonard Crestez [Thu, 20 Feb 2020 16:29:33 +0000 (18:29 +0200)]
clk: imx: Align imx sc clock parent msg structs to 4
commit
8400ab8896324641243b57fc49b448023c07409a upstream.
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes:
666aed2d13ee ("clk: imx: scu: add set parent support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leonard Crestez [Thu, 20 Feb 2020 16:29:32 +0000 (18:29 +0200)]
clk: imx: Align imx sc clock msg structs to 4
commit
a0ae04a25650fd51b7106e742d27333e502173c6 upstream.
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes:
fe37b4820417 ("clk: imx: add scu clock common part")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Vasut [Wed, 25 Mar 2020 14:25:47 +0000 (15:25 +0100)]
net: ks8851-ml: Fix IO operations, again
commit
8262e6f9b1034ede34548a04dec4c302d92c9497 upstream.
This patch reverts
58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
and
edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it
turns out these were only necessary due to buggy hardware. This patch adds
a check for such a buggy hardware to prevent any such mistakes again.
While working further on the KS8851 driver, it came to light that the
KS8851-16MLL is capable of switching bus endianness by a hardware strap,
EESK pin. If this strap is incorrect, the IO accesses require such endian
swapping as is being reverted by this patch. Such swapping also impacts
the performance significantly.
Hence, in addition to removing it, detect that the hardware is broken,
report to user, and fail to bind with such hardware.
Fixes:
58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
Fixes:
edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 2 Mar 2020 11:12:25 +0000 (12:12 +0100)]
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model
commit
0c625ccfe6f754d0896b8881f5c85bcb81699f1f upstream.
There are at least 3 models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO
events on the external embedded-controller pin to avoid spurious wakeups
on the HP x2 10 CHT + AXP288 model too.
This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes:
aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Reported-and-tested-by: Marc Lehmann <schmorp@schmorp.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-4-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>