usb: charger: assign specific number for enum value

commit ca4b43c14cd88d28cfc6467d2fa075aad6818f1d upstream.

To work properly on every architectures and compilers, the enum value
needs to be specific numbers.

Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Fix unwanted wakeup in netvsc_attach()

commit f6f13c125e05603f68f5bf31f045b95e6d493598 upstream.

When netvsc_attach() is called by operations like changing MTU, etc.,
an extra wakeup may happen while netvsc_attach() calling
rndis_filter_device_add() which sends rndis messages when queue is
stopped in netvsc_detach(). The completion message will wake up queue 0.

We can reproduce the issue by changing MTU etc., then the wake_queue
counter from "ethtool -S" will increase beyond stop_queue counter:
     stop_queue: 0
     wake_queue: 1
The issue causes queue wake up, and counter increment, no other ill
effects in current code. So we didn't see any network problem for now.

To fix this, initialize tx_disable to true, and set it to false when
the NIC is ready to be attached or registered.

Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gvt: Separate display reset from ALL_ENGINES reset

commit 3eb55e6f753a379e293395de8d5f3be28351a7f8 upstream.

ALL_ENGINES reset doesn't clobber display with the current gvt-g
supported platforms. Thus ALL_ENGINES reset shouldn't reset the
display engine registers emulated by gvt-g.

This fixes guest warning like

[ 14.622026] [drm] Initialized i915 1.6.0 20200114 for 0000:00:03.0 on minor 0
[ 14.967917] fbcon: i915drmfb (fb0) is primary device
[ 25.100188] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] E RROR [CRTC:51:pipe A] flip_done timed out
[ 25.100860] -----------[ cut here ]-----------
[ 25.100861] pll on state mismatch (expected 0, found 1)
[ 25.101024] WARNING: CPU: 1 PID: 30 at drivers/gpu/drm/i915/display/intel_dis play.c:14382 verify_single_dpll_state.isra.115+0x28f/0x320 [i915]
[ 25.101025] Modules linked in: intel_rapl_msr intel_rapl_common kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel cr ypto_simd cryptd glue_helper cec rc_core video drm_kms_helper joydev drm input_l eds i2c_algo_bit serio_raw fb_sys_fops syscopyarea sysfillrect sysimgblt mac_hid qemu_fw_cfg sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000 psmouse i2c_piix4 pata_acpi floppy
[ 25.101052] CPU: 1 PID: 30 Comm: kworker/u4:1 Not tainted 5.5.0+ #1
[ 25.101053] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .12.1-0-ga5cab58 04/01/2014
[ 25.101055] Workqueue: events_unbound async_run_entry_fn
[ 25.101092] RIP: 0010:verify_single_dpll_state.isra.115+0x28f/0x320 [i915]
[ 25.101093] Code: e0 d9 ff e9 a3 fe ff ff 80 3d e9 c2 11 00 00 44 89 f6 48 c7 c7 c0 9d 88 c0 75 3b e8 eb df d9 ff e9 c7 fe ff ff e8 d1 e0 ae c4 <0f> 0b e9 7a fe ff ff 80 3d c0 c2 11 00 00 8d 71 41 89 c2 48 c7 c7
[ 25.101093] RSP: 0018:ffffb1de80107878 EFLAGS: 00010286
[ 25.101094] RAX: 0000000000000000 RBX: ffffb1de80107884 RCX: 0000000000000007
[ 25.101095] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff94fdfdd19740
[ 25.101095] RBP: ffffb1de80107938 R08: 0000000d6bfdc7b4 R09: 000000000000002b
[ 25.101096] R10: ffff94fdf82dc000 R11: 0000000000000225 R12: 00000000000001f8
[ 25.101096] R13: ffff94fdb3ca6a90 R14: ffff94fdb3ca0000 R15: 0000000000000000
[ 25.101097] FS: 0000000000000000(0000) GS:ffff94fdfdd00000(0000) knlGS:00000 00000000000
[ 25.101098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.101098] CR2: 00007fbc3e2be9c8 CR3: 000000003339a003 CR4: 0000000000360ee0
[ 25.101101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 25.101101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 25.101102] Call Trace:
[ 25.101139] intel_atomic_commit_tail+0xde4/0x1520 [i915]
[ 25.101141] ? flush_workqueue_prep_pwqs+0xfa/0x130
[ 25.101142] ? flush_workqueue+0x198/0x3c0
[ 25.101174] intel_atomic_commit+0x2ad/0x320 [i915]
[ 25.101209] drm_atomic_commit+0x4a/0x50 [drm]
[ 25.101220] drm_client_modeset_commit_atomic+0x1c4/0x200 [drm]
[ 25.101231] drm_client_modeset_commit_force+0x47/0x170 [drm]
[ 25.101250] drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_hel per]
[ 25.101255] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper]
[ 25.101287] intel_fbdev_set_par+0x1a/0x40 [i915]
[ 25.101289] ? con_is_visible+0x2e/0x60
[ 25.101290] fbcon_init+0x378/0x600
[ 25.101292] visual_init+0xd5/0x130
[ 25.101296] do_bind_con_driver+0x217/0x430
[ 25.101297] do_take_over_console+0x7d/0x1b0
[ 25.101298] do_fbcon_takeover+0x5c/0xb0
[ 25.101299] fbcon_fb_registered+0x199/0x1a0
[ 25.101301] register_framebuffer+0x22c/0x330
[ 25.101306] __drm_fb_helper_initial_config_and_unlock+0x31a/0x520 [drm_kms_h elper]
[ 25.101311] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper]
[ 25.101341] intel_fbdev_initial_config+0x18/0x30 [i915]
[ 25.101342] async_run_entry_fn+0x3c/0x150
[ 25.101343] process_one_work+0x1fd/0x3f0
[ 25.101344] worker_thread+0x34/0x410
[ 25.101346] kthread+0x121/0x140
[ 25.101346] ? process_one_work+0x3f0/0x3f0
[ 25.101347] ? kthread_park+0x90/0x90
[ 25.101350] ret_from_fork+0x35/0x40
[ 25.101351] --[ end trace b5b47d44cd998ba1 ]--

Fixes: 6294b61ba769 ("drm/i915/gvt: add missing display part reset for vGPU reset")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200221023234.28635-1-tina.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetime

commit b549c252b1292aea959cd9b83537fcb9384a6112 upstream.

Deleting dmabuf item's list head after releasing its container can lead
to KASAN-reported issue:

  BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0
  Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119

So fix this issue by puting deleting dmabuf_objs ahead of releasing its
container.

Fixes: dfb6ae4e14bd6 ("drm/i915/gvt: Handle orphan dmabuf_objs")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-2-tina.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: jz4780: silence log flood on txabrt

commit 9e661cedcc0a072d91a32cb88e0515ea26e35711 upstream.

The printout for txabrt is way too talkative and is highly annoying with
scanning programs like 'i2cdetect'. Reduce it to the minimum, the rest
can be gained by I2C core debugging and datasheet information. Also,
make it a debug printout, it won't help the regular user.

Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: altera: Fix potential integer overflow

commit 54498e8070e19e74498a72c7331348143e7e1f8c upstream.

Factor out 100 from the equation and do 32-bit arithmetic (3 * clk_mhz / 10)
instead of 64-bit.

Notice that clk_mhz is MHz, so the multiplication will never wrap 32 bits
and there is no need for div_u64().

Addresses-Coverity: 1458369 ("Unintentional integer overflow")
Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver")
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'

commit bef8e2dfceed6daeb6ca3e8d33f9c9d43b926580 upstream.

Pointer on the memory allocated by 'alloc_progmem()' is stored in
'v->load_addr'. So this is this memory that should be freed by
'release_progmem()'.

'release_progmem()' is only a call to 'kfree()'.

With the current code, there is both a double free and a memory leak.
Fix it by passing the correct pointer to 'release_progmem()'.

Fixes: e01402b115ccc ("More AP / SP bits for the 34K, the Malta bits and things. Still wants")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: ralf@linux-mips.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: Fix race in in hiddev_disconnect()

commit 5c02c447eaeda29d3da121a2e17b97ccaf579b51 upstream.

Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect().
The hiddev_disconnect() function sets "hiddev->exist = 0;" so
hiddev_release() can free it as soon as we drop the "existancelock"
lock.  This patch moves the mutex_unlock(&hiddev->existancelock) until
after we have finished using it.

Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com
Fixes: 7f77897ef2b6 ("HID: hiddev: fix potential use-after-free")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: alps: Fix an error handling path in 'alps_input_configured()'

commit 8d2e77b39b8fecb794e19cd006a12f90b14dd077 upstream.

They are issues:
   - if 'input_allocate_device()' fails and return NULL, there is no need
     to free anything and 'input_free_device()' call is a no-op. It can
     be axed.
   - 'ret' is known to be 0 at this point, so we must set it to a
     meaningful value before returning

Fixes: 2562756dde55 ("HID: add Alps I2C HID Touchpad-Stick support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: Check docket sk_family instead of call getname

commit 42d84c8490f9f0931786f1623191fcab397c3d64 upstream.

Doing so, we save one call to get data we already have in the struct.

Also, since there is no guarantee that getname use sockaddr_ll
parameter beyond its size, we add a little bit of security here.
It should do not do beyond MAX_ADDR_LEN, but syzbot found that
ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25,
versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro).

Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

amdgpu/gmc_v9: save/restore sdpif regs during S3

commit a3ed353cf8015ba84a0407a5dc3ffee038166ab0 upstream.

fixes S3 issue with IOMMU + S/G  enabled @ 64M VRAM.

Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"

commit 66d0e797bf095d407479c89952d42b1d96ef0a7f upstream.

This reverts commit 4585fbcb5331fc910b7e553ad3efd0dd7b320d14.

The name changing as devfreq(X) breaks some user space applications,
such as Android HAL from Unisoc and Hikey [1].
The device name will be changed unexpectly after every boot depending
on module init sequence. It will make trouble to setup some system
configuration like selinux for Android.

So we'd like to revert it back to old naming rule before any better
way being found.

[1] https://lkml.org/lkml/2018/5/8/1042

Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Orson Zhai <orson.unisoc@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Disable trace_printk() on post poned tests

commit 78041c0c9e935d9ce4086feeff6c569ed88ddfd4 upstream.

The tracing seftests checks various aspects of the tracing infrastructure,
and one is filtering. If trace_printk() is active during a self test, it can
cause the filtering to fail, which will disable that part of the trace.

To keep the selftests from failing because of trace_printk() calls,
trace_printk() checks the variable tracing_selftest_running, and if set, it
does not write to the tracing buffer.

As some tracers were registered earlier in boot, the selftest they triggered
would fail because not all the infrastructure was set up for the full
selftest. Thus, some of the tests were post poned to when their
infrastructure was ready (namely file system code). The postpone code did
not set the tracing_seftest_running variable, and could fail if a
trace_printk() was added and executed during their run.

Cc: stable@vger.kernel.org
Fixes: 9afecfbb95198 ("tracing: Postpone tracer start-up tests till the system is more robust")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macintosh: therm_windtunnel: fix regression when instantiating devices

commit 38b17afb0ebb9ecd41418d3c08bcf9198af4349d upstream.

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: increase HID report buffer size to 8KiB

commit 84a4062632462c4320704fcdf8e99e89e94c0aba upstream.

We have a HID touch device that reports its opens and shorts test
results in HID buffers of size 8184 bytes. The maximum size of the HID
buffer is currently set to 4096 bytes, causing probe of this device to
fail. With this patch we increase the maximum size of the HID buffer to
8192 bytes, making device probe and acquisition of said buffers succeed.

Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: core: fix off-by-one memset in hid_report_raw_event()

commit 5ebdffd25098898aff1249ae2f7dbfddd76d8f8f upstream.

In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated,
but the report-number byte is not correctly handled. This results in a
off-by-one in the following memset, causing a kernel Oops and ensuing
system crash.

Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in
hid_field_extract") I no longer hit the kernel Oops as we instead fail
"controlled" at probe if there is a report too long in the HID
report-descriptor. hid_report_raw_event() is an exported symbol, so
presumabely we cannot always rely on this being the case.

Fixes: 966922f26c7f ("HID: fix a crash in hid_report_raw_event()
                     function.")
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock

commit beae56192a2570578ae45050e73c5ff9254f63e6 upstream.

Commit 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard
dock") added the USB id for the Acer SW5-012's keyboard dock to the
hid-ite driver to fix the rfkill driver not working.

Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the
"Wireless Radio Control" bits which need the special hid-ite driver on the
second USB interface (the mouse interface) and their touchpad only supports
mouse emulation, so using generic hid-input handling for anything but
the "Wireless Radio Control" bits is fine. On these devices we simply bind
to all USB interfaces.

But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10
(SW5-012)'s touchpad not only does mouse emulation it also supports
HID-multitouch and all the keys including the "Wireless Radio Control"
bits have been moved to the first USB interface (the keyboard intf).

So we need hid-ite to handle the first (keyboard) USB interface and have
it NOT bind to the second (mouse) USB interface so that that can be
handled by hid-multitouch.c and we get proper multi-touch support.

This commit changes the hid_device_id for the SW5-012 keyboard dock to
only match on hid devices from the HID_GROUP_GENERIC group, this way
hid-ite will not bind the the mouse/multi-touch interface which has
HID_GROUP_MULTITOUCH_WIN_8 as group.
This fixes the regression to mouse-emulation mode introduced by adding
the keyboard dock USB id.

Cc: stable@vger.kernel.org
Fixes: 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock")
Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: check descriptor table exits on instruction emulation

commit 86f7e90ce840aa1db407d3ea6e9b3a52b2ce923c upstream.

KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.

Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.

Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: watchdog: Fix gas->access_width usage

commit 2ba33a4e9e22ac4dda928d3e9b5978a3a2ded4e0 upstream.

ACPI Generic Address Structure (GAS) access_width field is not in bytes
as the driver seems to expect in few places so fix this by using the
newly introduced macro ACPI_ACCESS_BYTE_WIDTH().

Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment")
Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro

commit 1dade3a7048ccfc675650cd2cf13d578b095e5fb upstream.

Sometimes it is useful to find the access_width field value in bytes and
not in bits so add a helper that can be used for this purpose.

Suggested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix error handling in audit_data_to_entry()

commit 2ad3e17ebf94b7b7f3f64c050ff168f9915345eb upstream.

Commit 219ca39427bf ("audit: use union for audit_field values since
they are mutually exclusive") combined a number of separate fields in
the audit_field struct into a single union.  Generally this worked
just fine because they are generally mutually exclusive.
Unfortunately in audit_data_to_entry() the overlap can be a problem
when a specific error case is triggered that causes the error path
code to attempt to cleanup an audit_field struct and the cleanup
involves attempting to free a stored LSM string (the lsm_str field).
Currently the code always has a non-NULL value in the
audit_field.lsm_str field as the top of the for-loop transfers a
value into audit_field.val (both .lsm_str and .val are part of the
same union); if audit_data_to_entry() fails and the audit_field
struct is specified to contain a LSM string, but the
audit_field.lsm_str has not yet been properly set, the error handling
code will attempt to free the bogus audit_field.lsm_str value that
was set with audit_field.val at the top of the for-loop.

This patch corrects this by ensuring that the audit_field.val is only
set when needed (it is cleared when the audit_field struct is
allocated with kcalloc()).  It also corrects a few other issues to
ensure that in case of error the proper error code is returned.

Cc: stable@vger.kernel.org
Fixes: 219ca39427bf ("audit: use union for audit_field values since they are mutually exclusive")
Reported-by: syzbot+1f4d90ead370d72e450b@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()

commit 37b0b6b8b99c0e1c1f11abbe7cf49b6d03795b3f upstream.

If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728b99e ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: Fix to avoid gettig invalid tls record

[ Upstream commit 06f5201c6392f998a49ca9c9173e2930c8eb51d8 ]

Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qede: Fix race between rdma destroy workqueue and link change event

[ Upstream commit af6565adb02d3129d3fae4d9d5da945abaf4417a ]

If an event is added while the rdma workqueue is being destroyed
it could lead to several races, list corruption, null pointer
dereference during queue_work or init_queue.
This fixes the race between the two flows which can occur during
shutdown.

A kref object and a completion object are added to the rdma_dev
structure, these are initialized before the workqueue is created.
The refcnt is used to indicate work is being added to the
workqueue and ensures the cleanup flow won't start while we're in
the middle of adding the event.
Once the work is added, the refcnt is decreased and the cleanup flow
is safe to run.

Fixes: cee9fbd8e2e ("qede: Add qedr framework")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix nlmsg_flags when splitting a multipath route

[ Upstream commit afecdb376bd81d7e16578f0cfe82a1aec7ae18f3 ]

When splitting an RTA_MULTIPATH request into multiple routes and adding the
second and later components, we must not simply remove NLM_F_REPLACE but
instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink
message was malformed.

For example,
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \
nexthop via fe80::30:2 dev dummy0
results in the following warnings:
[ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE
[ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route

This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to
what it would get if the multipath route had been added in multiple netlink
operations:
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0
ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0

Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix route replacement with dev-only route

[ Upstream commit e404b8c7cfb31654c9024d497cec58a501501692 ]

After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.

Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.

We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.

Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: move the format error check out of __sctp_sf_do_9_1_abort

[ Upstream commit 245709ec8be89af46ea7ef0444c9c80913999d99 ]

When T2 timer is to be stopped, the asoc should also be deleted,
otherwise, there will be no chance to call sctp_association_free
and the asoc could last in memory forever.

However, in sctp_sf_shutdown_sent_abort(), after adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the
format error from __sctp_sf_do_9_1_abort() and miss adding
SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.

This patch is to fix it by moving the format error check out of
__sctp_sf_do_9_1_abort(), and do it before adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer.

Thanks Hangbin for reporting this issue by the fuzz testing.

v1->v2:
  - improve the comment in the code as Marcelo's suggestion.

Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: pn544: Fix occasional HW initialization failure

[ Upstream commit c3331d2fe3fd4d5e321f2467d01f72de7edfb5d0 ]

The PN544 driver checks the "enable" polarity during of driver's probe and
it's doing that by turning ON and OFF NFC with different polarities until
enabling succeeds. It takes some time for the hardware to power-down, and
thus, to deassert the IRQ that is raised by turning ON the hardware.
Since the delay after last power-down of the polarity-checking process is
missed in the code, the interrupt may trigger immediately after installing
the IRQ handler (right after the checking is done), which results in IRQ
handler trying to touch the disabled HW and ends with marking NFC as
'DEAD' during of the driver's probe:

  pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high
  pn544_hci_i2c 1-002a: NFC: invalid len byte
  shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead

This patch fixes the occasional NFC initialization failure on Nexus 7
device.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: correct flower port blocking

[ Upstream commit 8a9093c79863b58cc2f9874d7ae788f0d622a596 ]

tc flower rules that are based on src or dst port blocking are sometimes
ineffective due to uninitialized stack data. __skb_flow_dissect() extracts
ports from the skb for tc flower to match against. However, the port
dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in
key_control->flags. All callers of __skb_flow_dissect(), zero-out the
key_control field except for fl_classify() as used by the flower
classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to
__skb_flow_dissect(), since key_control is allocated on the stack
and may not be initialized.

Since key_basic and key_control are present for all flow keys, let's
make sure they are initialized.

Fixes: 62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: restore mdio regs in the iproc mdio driver

commit 6f08e98d62799e53c89dbf2c9a49d77e20ca648c upstream.

The mii management register in iproc mdio block
does not have a retention register so it is lost on suspend.
Save and restore value of register while resuming from suspend.

Fixes: bb1a619735b4 ("net: phy: Initialize mdio clock at probe function")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mscc: fix in frame extraction

[ Upstream commit a81541041ceb55bcec9a8bb8ad3482263f0a205a ]

Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted
by reading chuncks of 4 bytes from a register.

In case the IFH and frames were read corretly it would try to read the next
frame. In case there are no more frames in the queue, it checks if there
were any previous errors and in that case clear the queue. But this check
will always succeed also when there are no errors. Because when extracting
the IFH the error is checked against 4(number of bytes read) and then the
error is set only if the extraction of the frame failed. So in a happy case
where there are no errors the err variable is still 4. So it could be
a case where after the check that there are no more frames in the queue, a
frame will arrive in the queue but because the error is not reseted, it
would try to flush the queue. So the frame will be lost.

The fix consist in resetting the error after reading the IFH.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fib_rules: Correctly set table field when table number exceeds 8 bits

[ Upstream commit 540e585a79e9d643ede077b73bcc7aa2d7b4d919 ]

In 709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to
allow legacy software to deal with routing table numbers >= 256, but the
same change to FIB rule queries was overlooked.

Signed-off-by: Jethro Beekman <jethro@fortanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysrq: Remove duplicated sysrq message

commit c3fee60908db4a8594f2e4a2131998384b8fa006 upstream.

The commit 97f5f0cd8cd0a0544 ("Input: implement SysRq as a separate input
handler") added pr_fmt() definition. It caused a duplicated message
prefix in the sysrq header messages, for example:

[  177.053931] sysrq: SysRq : Show backtrace of all active CPUs
[  742.864776] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c)

Fixes: 97f5f0cd8cd0a05 ("Input: implement SysRq as a separate input handler")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysrq: Restore original console_loglevel when sysrq disabled

commit 075e1a0c50f59ea210561d0d0fedbd945615df78 upstream.

The sysrq header line is printed with an increased loglevel
to provide users some positive feedback.

The original loglevel is not restored when the sysrq operation
is disabled. This bug was introduced in 2.6.12 (pre-git-history)
by the commit ("Allow admin to enable only some of the Magic-Sysrq
functions").

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE

[ Upstream commit ea75080110a4c1fa011b0a73cb8f42227143ee3e ]

The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute.
As a result, for strictly validated commands, it's assumed to not be
supported.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix mode output in debugging statements

[ Upstream commit f52aa79df43c4509146140de0241bc21a4a3b4c7 ]

A number of the debug statements output file or directory mode
in hex.  Change these to print using octal.

Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: ena-com.c: prevent NULL pointer dereference

[ Upstream commit c207979f5ae10ed70aff1bb13f39f0736973de99 ]

comp_ctx can be NULL in a very rare case when an admin command is executed
during the execution of ena_remove().

The bug scenario is as follows:

* ena_destroy_device() sets the comp_ctx to be NULL
* An admin command is executed before executing unregister_netdev(),
  this can still happen because our device can still receive callbacks
  from the netdev infrastructure such as ethtool commands.
* When attempting to access the comp_ctx, the bug occurs since it's set
  to NULL

Fix:
Added a check that comp_ctx is not NULL

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: ethtool: use correct value for crc32 hash

[ Upstream commit 886d2089276e40d460731765083a741c5c762461 ]

Up till kernel 4.11 there was no enum defined for crc32 hash in ethtool,
thus the xor enum was used for supporting crc32.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix incorrectly saving queue numbers when setting RSS indirection table

[ Upstream commit 92569fd27f5cb0ccbdf7c7d70044b690e89a0277 ]

The indirection table has the indices of the Rx queues. When we store it
during set indirection operation, we convert the indices to our internal
representation of the indices.

Our internal representation of the indices is: even indices for Tx and
uneven indices for Rx, where every Tx/Rx pair are in a consecutive order
starting from 0. For example if the driver has 3 queues (3 for Tx and 3
for Rx) then the indices are as follows:
0  1  2  3  4  5
Tx Rx Tx Rx Tx Rx

The BUG:
The issue is that when we satisfy a get request for the indirection
table, we don't convert the indices back to the original representation.

The FIX:
Simply apply the inverse function for the indices of the indirection
table after we set it.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: rss: store hash function as values and not bits

[ Upstream commit 4844470d472d660c26149ad764da2406adb13423 ]

The device receives, stores and retrieves the hash function value as bits
and not as their enum value.

The bug:
* In ena_com_set_hash_function() we set
  cmd.u.flow_hash_func.selected_func to the bit value of rss->hash_func.
 (1 << rss->hash_func)
* In ena_com_get_hash_function() we retrieve the hash function and store
  it's bit value in rss->hash_func. (Now the bit value of rss->hash_func
  is stored in rss->hash_func instead of it's enum value)

The fix:
This commit fixes the issue by converting the retrieved hash function
values from the device to the matching enum value of the set bit using
ffs(). ffs() finds the first set bit's index in a word. Since the function
returns 1 for the LSB's index, we need to subtract 1 from the returned
value (note that BIT(0) is 1).

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: rss: fix failure to get indirection table

[ Upstream commit 0c8923c0a64fb5d14bebb9a9065d2dc25ac5e600 ]

On old hardware, getting / setting the hash function is not supported while
gettting / setting the indirection table is.

This commit enables us to still show the indirection table on older
hardwares by setting the hash function and key to NULL.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix incorrect default RSS key

[ Upstream commit 0d1c3de7b8c78a5e44b74b62ede4a63629f5d811 ]

Bug description:
When running "ethtool -x <if_name>" the key shows up as all zeros.

When we use "ethtool -X <if_name> hfunc toeplitz hkey <some:random:key>" to
set the key and then try to retrieve it using "ethtool -x <if_name>" then
we return the correct key because we return the one we saved.

Bug cause:
We don't fetch the key from the device but instead return the key
that we have saved internally which is by default set to zero upon
allocation.

Fix:
This commit fixes the issue by initializing the key to a random value
using netdev_rss_key_fill().

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: add missing ethtool TX timestamping indication

[ Upstream commit cf6d17fde93bdda23c9b02dd5906a12bf8c55209 ]

Current implementation of the driver calls skb_tx_timestamp()to add a
software tx timestamp to the skb, however the software-transmit capability
is not reported in ethtool -T.

This commit updates the ethtool structure to report the software-transmit
capability in ethtool -T using the standard ethtool_op_get_ts_info().
This function reports all software timestamping capabilities (tx and rx),
as well as setting phc_index = -1. phc_index is the index of the PTP
hardware clock device that will be used for hardware timestamps. Since we
don't have such a device in ENA, using the default -1 value is the correct
setting.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Ezequiel Lara Gomez <ezegomez@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix uses of round_jiffies()

[ Upstream commit 2a6e5fa2f4c25b66c763428a3e65363214946931 ]

>From the documentation of round_jiffies():
"Rounds a time delta  in the future (in jiffies) up or down to
(approximately) full seconds. This is useful for timers for which
the exact time they fire does not matter too much, as long as
they fire approximately every X seconds.
By rounding these timers to whole seconds, all such timers will fire
at the same time, rather than at various times spread out. The goal
of this is to have the CPU wake up less, which saves power."

There are 2 parts to this patch:
================================
Part 1:
-------
In our case we need timer_service to be called approximately every
X=1 seconds, and the exact time does not matter, so using round_jiffies()
is the right way to go.

Therefore we add round_jiffies() to the mod_timer() in ena_timer_service().

Part 2:
-------
round_jiffies() is used in check_for_missing_keep_alive() when
getting the jiffies of the expiration of the keep_alive timeout. Here it
is actually a mistake to use round_jiffies() because we want the exact
time when keep_alive should expire and not an approximate rounded time,
which can cause early, false positive, timeouts.

Therefore we remove round_jiffies() in the calculation of
keep_alive_expired() in check_for_missing_keep_alive().

Fixes: 82ef30f13be0 ("net: ena: add hardware hints capability to the driver")
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix potential crash when rxfh key is NULL

[ Upstream commit 91a65b7d3ed8450f31ab717a65dcb5f9ceb5ab02 ]

When ethtool -X is called without an hkey, ena_com_fill_hash_function()
is called with key=NULL, which is passed to memcpy causing a crash.

This commit fixes this issue by checking key is not NULL.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: fuse: Fix build with Tegra194 configuration

[ Upstream commit 6f4ecbe284df5f22e386a640d9a4b32cede62030 ]

If only Tegra194 support is enabled, the tegra30_fuse_read() and
tegra30_fuse_init() function are not declared and cause a build failure.
Add Tegra194 to the preprocessor guard to make sure these functions are
available for Tegra194-only builds as well.

Link: https://lore.kernel.org/r/20200203143114.3967295-1-thierry.reding@gmail.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi

[ Upstream commit f24667779b5348279e5e4328312a141a730a1fc7 ]

frame-inversion is "flag" not "uint32".
This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qmi_wwan: unconditionally reject 2 ep interfaces

[ Upstream commit 00516d13d4cfa56ce39da144db2dbf08b09b9357 ]

We have been using the fact that the QMI and DIAG functions
usually are the only ones with class/subclass/protocol being
ff/ff/ff on Quectel modems. This has allowed us to match the
QMI function without knowing the exact interface number,
which can vary depending on firmware configuration.

The ability to silently reject the DIAG function, which is
usually handled by the option driver, is important for this
method to work.  This is done based on the knowledge that it
has exactly 2 bulk endpoints.  QMI function control interfaces
will have either 3 or 1 endpoint. This rule is universal so
the quirk condition can be removed.

The fixed layouts known from the Gobi1k and Gobi2k modems
have been gradually replaced by more dynamic layouts, and
many vendors now use configurable layouts without changing
device IDs.  Renaming the class/subclass/protocol matching
macro makes it more obvious that this is now not Quectel
specific anymore.

Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qmi_wwan: re-add DW5821e pre-production variant

[ Upstream commit 88bf54603f6f2c137dfee1abf6436ceac3528d2d ]

Commit f25e1392fdb5 removed the support for the pre-production variant
of the Dell DW5821e to avoid probing another USB interface unnecessarily.
However, the pre-production samples are found in the wild, and this lack
of support is causing problems for users of such samples.  It is therefore
necessary to support both variants.

Matching on both interfaces 0 and 1 is not expected to cause any problem
with either variant, as only the QMI function will be probed successfully
on either.  Interface 1 will be rejected based on the HID class for the
production variant:

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

And interface 0 will be rejected based on too few endpoints for the
pre-production variant:

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev= 3.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Fixes: f25e1392fdb5 ("qmi_wwan: fix interface number for DW5821e production firmware")
Link: https://whrl.pl/Rf0vNk
Reported-by: Lars Melin <larsm17@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: fix card and queue total counter wrap

[ Upstream commit fcd98d4002539f1e381916fc1b6648938c1eac76 ]

The internal statistic counters for the total number of
requests processed per card and per queue used integers. So they do
wrap after a rather huge amount of crypto requests processed. This
patch introduces uint64 counters which should hold much longer but
still may wrap. The sysfs attributes request_count for card and queue
also used only %ld and now display the counter value with %llu.

This is not a security relevant fix. The int overflow which happened
is not in any way exploitable as a security breach.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: check wiphy driver existence for drvinfo report

[ Upstream commit bfb7bac3a8f47100ebe7961bd14e924c96e21ca7 ]

When preparing ethtool drvinfo, check if wiphy driver is defined
before dereferencing it. Driver may not exist, e.g. if wiphy is
attached to a virtual platform device.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200203105644.28875-1-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: consider more elements in parsing CRC

[ Upstream commit a04564c99bb4a92f805a58e56b2d22cc4978f152 ]

We only use the parsing CRC for checking if a beacon changed,
and elements with an ID > 63 cannot be represented in the
filter. Thus, like we did before with WMM and Cisco vendor
elements, just statically add these forgotten items to the
CRC:
 - WLAN_EID_VHT_OPERATION
 - WLAN_EID_OPMODE_NOTIF

I guess that in most cases when VHT/HE operation change, the HT
operation also changed, and so the change was picked up, but we
did notice that pure operating mode notification changes were
ignored.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi
[restrict to VHT for the mac80211 branch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dax: pass NOWAIT flag to iomap_apply

[ Upstream commit 96222d53842dfe54869ec4e1b9d4856daf9105a2 ]

fstests generic/471 reports a failure when run with MOUNT_OPTIONS="-o
dax".  The reason is that the initial pwrite to an empty file with the
RWF_NOWAIT flag set does not return -EAGAIN.  It turns out that
dax_iomap_rw doesn't pass that flag through to iomap_apply.

With this patch applied, generic/471 passes for me.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/x49r1z86e1d.fsf@segfault.boston.devel.redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Set dma maximum segment size for mdss

[ Upstream commit db735fc4036bbe1fbe606819b5f0ff26cc76cdff ]

Turning on CONFIG_DMA_API_DEBUG_SG results in the following error:

[   12.078665] msm ae00000.mdss: DMA-API: mapping sg segment longer than device claims to support [len=3526656] [max=65536]
[   12.089870] WARNING: CPU: 6 PID: 334 at /mnt/host/source/src/third_party/kernel/v4.19/kernel/dma/debug.c:1301 debug_dma_map_sg+0x1dc/0x318
[   12.102655] Modules linked in: joydev
[   12.106442] CPU: 6 PID: 334 Comm: frecon Not tainted 4.19.0 #2
[   12.112450] Hardware name: Google Cheza (rev3+) (DT)
[   12.117566] pstate: 60400009 (nZCv daif +PAN -UAO)
[   12.122506] pc : debug_dma_map_sg+0x1dc/0x318
[   12.126995] lr : debug_dma_map_sg+0x1dc/0x318
[   12.131487] sp : ffffff800cc3ba80
[   12.134913] x29: ffffff800cc3ba80 x28: 0000000000000000
[   12.140395] x27: 0000000000000004 x26: 0000000000000004
[   12.145868] x25: ffffff8008e55b18 x24: 0000000000000000
[   12.151337] x23: 00000000ffffffff x22: ffffff800921c000
[   12.156809] x21: ffffffc0fa75b080 x20: ffffffc0f7195090
[   12.162280] x19: ffffffc0f1c53280 x18: 0000000000000000
[   12.167749] x17: 0000000000000000 x16: 0000000000000000
[   12.173218] x15: 0000000000000000 x14: 0720072007200720
[   12.178689] x13: 0720072007200720 x12: 0720072007200720
[   12.184161] x11: 0720072007200720 x10: 0720072007200720
[   12.189641] x9 : ffffffc0f1fc6b60 x8 : 0000000000000000
[   12.195110] x7 : ffffff8008132ce0 x6 : 0000000000000000
[   12.200585] x5 : 0000000000000000 x4 : ffffff8008134734
[   12.206058] x3 : ffffff800cc3b830 x2 : ffffffc0f1fc6240
[   12.211532] x1 : 25045a74f48a7400 x0 : 25045a74f48a7400
[   12.217006] Call trace:
[   12.219535]  debug_dma_map_sg+0x1dc/0x318
[   12.223671]  get_pages+0x19c/0x20c
[   12.227177]  msm_gem_fault+0x64/0xfc
[   12.230874]  __do_fault+0x3c/0x140
[   12.234383]  __handle_mm_fault+0x70c/0xdb8
[   12.238603]  handle_mm_fault+0xac/0xc4
[   12.242473]  do_page_fault+0x1bc/0x3d4
[   12.246342]  do_translation_fault+0x54/0x88
[   12.250652]  do_mem_abort+0x60/0xf0
[   12.254250]  el0_da+0x20/0x24
[   12.257317] irq event stamp: 67260
[   12.260828] hardirqs last  enabled at (67259): [<ffffff8008132d0c>] console_unlock+0x214/0x608
[   12.269693] hardirqs last disabled at (67260): [<ffffff8008080e0c>] do_debug_exception+0x5c/0x178
[   12.278820] softirqs last  enabled at (67256): [<ffffff8008081664>] __do_softirq+0x4d4/0x520
[   12.287510] softirqs last disabled at (67249): [<ffffff80080be574>] irq_exit+0xa8/0x100
[   12.295742] ---[ end trace e63cfc40c313ffab ]---

The root of the problem is that the default segment size for sgt is
(UINT_MAX & PAGE_MASK), and the default segment size for device dma is
64K. As such, if you compare the 2, you would deduce that the sg segment
will overflow the device's capacity. In reality, the hardware can
accommodate the larger sg segments, it's just not initializing its max
segment properly. This patch initializes the max segment size for the
mdss device, which gets rid of that pesky warning.

Reported-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121111813.REPOST.1.I92c66a35fb13f368095b05287bdabdbe88ca6922@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Handle a possible NULL pointer reference

[ Upstream commit 6b8526d3abc02c08a2f888e8c20b7ac9e5776dfe ]

In error cases a NULL can be passed to memcpy.  The length will always
be zero, so it doesn't really matter, but go ahead and check for NULL,
anyway, to be more precise and avoid static analysis errors.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: fix rb_allocator workqueue allocation

commit 8188a18ee2e48c9a7461139838048363bfce3fef upstream

We don't handle failures in the rb_allocator workqueue allocation
correctly. To fix that, move the code earlier so the cleanup is
easier and we don't have to undo all the interrupt allocations in
this case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[Ajay: Modified to apply on v4.19.y and v4.14.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3-its: Fix misuse of GENMASK macro

[ Upstream commit 20faba848752901de23a4d45a1174d64d2069dde ]

Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/ab5deb4fc3cd604cb620054770b7d00016d736bc.1562734889.git.joe@perches.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.107

Revert "char/random: silence a lockdep splat with printk()"

This reverts commit 15341b1dd409749fa5625e4b632013b6ba81609b which is
commit 1b710b1b10eff9d46666064ea25f079f70bc67a8 upstream.

Lech writes:
After upgrading kernel on our boards from v4.19.105 to v4.19.106
we found out that syslog fails to read the messages after ones
read initially after opening /proc/kmsg just after booting.

I also found out, that output of 'dmesg --follow' also doesn't
react on new printks appearing for whatever reason - to read new
messages, reopening /proc/kmsg or /dev/kmsg was needed.

I bisected this down to commit
15341b1dd409749fa5625e4b632013b6ba81609b ("char/random: silence
a lockdep splat with printk()"), and reverting it on top of
v4.19.106 restored correct behaviour.

While people dig to find out how such an odd change causes a lockup,
let's just revert this for now as it's not all that big of a deal for
4.19.y.

Reported-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range

commit 380324734956c64cd060e1db4304f3117ac15809 upstream.

Clang warns:

 In file included from ../arch/s390/purgatory/purgatory.c:10:
 In file included from ../include/linux/kexec.h:18:
 In file included from ../include/linux/crash_core.h:6:
 In file included from ../include/linux/elfcore.h:5:
 In file included from ../include/linux/user.h:1:
 In file included from ../arch/s390/include/asm/user.h:11:
 ../arch/s390/include/asm/page.h:45:6: warning: converting the result of
 '<<' to a boolean always evaluates to false
 [-Wtautological-constant-compare]
         if (PAGE_DEFAULT_KEY)
            ^
 ../arch/s390/include/asm/page.h:23:44: note: expanded from macro
 'PAGE_DEFAULT_KEY'
 #define PAGE_DEFAULT_KEY        (PAGE_DEFAULT_ACC << 4)
                                                  ^
 1 warning generated.

Explicitly compare this against zero to silence the warning as it is
intended to be used in a boolean context.

Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0")
Link: https://github.com/ClangBuiltLinux/linux/issues/860
Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: Enable interrupts when calling _cond_resched()

commit 8645e56a4ad6dcbf504872db7f14a2f67db88ef2 upstream.

xen_maybe_preempt_hcall() is called from the exception entry point
xen_do_hypervisor_callback with interrupts disabled.

_cond_resched() evades the might_sleep() check in cond_resched() which
would have caught that and schedule_debug() unfortunately lacks a check
for irqs_disabled().

Enable interrupts around the call and use cond_resched() to catch future
issues.

Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci: Add shutdown to freeze hardware resources of ahci

commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream.

device_shutdown() called from reboot or power_shutdown expect
all devices to be shutdown. Same is true for even ahci pci driver.
As no ahci shutdown function is implemented, the ata subsystem
always remains alive with DMA & interrupt support. File system
related calls should not be honored after device_shutdown().

So defining ahci pci driver shutdown to freeze hardware (mask
interrupt, stop DMA engine and free DMA resources).

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix call RCU cleanup using non-bh-safe locks

commit 963485d436ccc2810177a7b08af22336ec2af67b upstream.

rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock.  RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.

To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred.  This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.

Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.

Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.

Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.

Fixes: 999b69f89241 ("rxrpc: Kill the client connection bundle concept")
Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com
Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_hashlimit: limit the max size of hashtable

commit 8d0015a7ab76b8b1e89a3e5f5710a6e5103f2dd5 upstream.

The user-specified hashtable size is unbound, this could
easily lead to an OOM or a hung task as we hold the global
mutex while allocating and initializing the new hashtable.

Add a max value to cap both cfg->size and cfg->max, as
suggested by Florian.

Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix concurrent access to queue current tick/time

commit dc7497795e014d84699c3b8809ed6df35352dd74 upstream.

snd_seq_check_queue() passes the current tick and time of the given
queue as a pointer to snd_seq_prioq_cell_out(), but those might be
updated concurrently by the seq timer update.

Fix it by retrieving the current tick and time via the proper helper
functions at first, and pass those values to snd_seq_prioq_cell_out()
later in the loops.

snd_seq_timer_get_cur_time() takes a new argument and adjusts with the
current system time only when it's requested so; this update isn't
needed for snd_seq_check_queue(), as it's called either from the
interrupt handler or right after queuing.

Also, snd_seq_timer_get_cur_tick() is changed to read the value in the
spinlock for the concurrency, too.

Reported-by: syzbot+fd5e0eaa1a32999173b2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200214111316.26939-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Avoid concurrent access to queue flags

commit bb51e669fa49feb5904f452b2991b240ef31bc97 upstream.

The queue flags are represented in bit fields and the concurrent
access may result in unexpected results.  Although the current code
should be mostly OK as it's only reading a field while writing other
fields as KCSAN reported, it's safer to cover both with a proper
spinlock protection.

This patch fixes the possible concurrent read by protecting with
q->owner_lock.  Also the queue owner field is protected as well since
it's the field to be protected by the lock itself.

Reported-by: syzbot+65c6c92d04304d0a8efc@syzkaller.appspotmail.com
Reported-by: syzbot+e60ddfa48717579799dd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200214111316.26939-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: Avoid bit fields for state flags

commit dfa9a5efe8b932a84b3b319250aa3ac60c20f876 upstream.

The rawmidi state flags (opened, append, active_sensing) are stored in
bit fields that can be potentially racy when concurrently accessed
without any locks.  Although the current code should be fine, there is
also no any real benefit by keeping the bitfields for this kind of
short number of members.

This patch changes those bit fields flags to the simple bool fields.
There should be no size increase of the snd_rawmidi_substream by this
change.

Reported-by: syzbot+576cc007eb9f2c968200@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200214111316.26939-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, offload: Replace bitwise AND by logical AND in bpf_prog_offload_info_fill

commit e20d3a055a457a10a4c748ce5b7c2ed3173a1324 upstream.

This if guards whether user-space wants a copy of the offload-jited
bytecode and whether this bytecode exists. By erroneously doing a bitwise
AND instead of a logical AND on user- and kernel-space buffer-size can lead
to no data being copied to user-space especially when user-space size is a
power of two and bigger then the kernel-space buffer.

Fixes: fcfb126defda ("bpf: add new jited info fields in bpf_dev_offload and bpf_prog_info")
Signed-off-by: Johannes Krude <johannes@krude.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20200212193227.GA3769@phlox.h.transitiv.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/proc: Reject invalid affinity masks (again)

commit cba6437a1854fde5934098ec3bd0ee83af3129f5 upstream.

Qian Cai reported that the WARN_ON() in the x86/msi affinity setting code,
which catches cases where the affinity setting is not done on the CPU which
is the current target of the interrupt, triggers during CPU hotplug stress
testing.

It turns out that the warning which was added with the commit addressing
the MSI affinity race unearthed yet another long standing bug.

If user space writes a bogus affinity mask, i.e. it contains no online CPUs,
then it calls irq_select_affinity_usr(). This was introduced for ALPHA in

  eee45269b0f5 ("[PATCH] Alpha: convert to generic irq framework (generic part)")

and subsequently made available for all architectures in

  18404756765c ("genirq: Expose default irq affinity mask (take 3)")

which introduced the circumvention of the affinity setting restrictions for
interrupt which cannot be moved in process context.

The whole exercise is bogus in various aspects:

  1) If the interrupt is already started up then there is absolutely
     no point to honour a bogus interrupt affinity setting from user
     space. The interrupt is already assigned to an online CPU and it
     does not make any sense to reassign it to some other randomly
     chosen online CPU.

  2) If the interupt is not yet started up then there is no point
     either. A subsequent startup of the interrupt will invoke
     irq_setup_affinity() anyway which will chose a valid target CPU.

So the only correct solution is to just return -EINVAL in case user space
wrote an affinity mask which does not contain any online CPUs, except for
ALPHA which has it's own magic sauce for this.

Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lkml.kernel.org/r/878sl8xdbm.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix compile warning from intel-svm.h

commit e7598fac323aad0e502415edeffd567315994dd6 upstream.

The intel_svm_is_pasid_valid() needs to be marked inline, otherwise it
causes the compile warning below:

  CC [M]  drivers/dma/idxd/cdev.o
In file included from drivers/dma/idxd/cdev.c:9:0:
./include/linux/intel-svm.h:125:12: warning: ‘intel_svm_is_pasid_valid’ defined but not used [-Wunused-function]
 static int intel_svm_is_pasid_valid(struct device *dev, int pasid)
            ^~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Borislav Petkov <bp@alien8.de>
Fixes: 15060aba71711 ('iommu/vt-d: Helper function to query if a pasid has any active users')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ecryptfs: replace BUG_ON with error handling code

commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72 upstream.

In crypt_scatterlist, if the crypt_stat argument is not set up
correctly, the kernel crashes. Instead, by returning an error code
upstream, the error is handled safely.

The issue is detected via a static analysis tool written by us.

Fixes: 237fead619984 (ecryptfs: fs/Makefile and fs/Kconfig)
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: use after free in gb_audio_manager_remove_all()

commit b7db58105b80fa9232719c8329b995b3addfab55 upstream.

When we call kobject_put() and it's the last reference to the kobject
then it calls gb_audio_module_release() and frees module.  We dereference
"module" on the next line which is a use after free.

Fixes: c77f85bbc91a ("greybus: audio: Fix incorrect counting of 'ida'")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Link: https://lore.kernel.org/r/20200205123217.jreendkyxulqsool@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: fix copy of overlapping memory

commit 8ae9a588ca35eb9c32dc03299c5e1f4a1e9a9617 upstream.

Currently the rtw_sprintf prints the contents of thread_name
onto thread_name and this can lead to a potential copy of a
string over itself. Avoid this by printing the literal string RTWHALXT
instread of the contents of thread_name.

Addresses-Coverity: ("copy of overlapping memory")
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200126220549.9849-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix in ISOC request length checking

commit 860ef6cd3f90b84a1832f8a6485c90c34d3b588b upstream.

Moved ISOC request length checking from dwc2_hsotg_start_req() function to
dwc2_hsotg_ep_queue().

Fixes: 4fca54aa58293 ("usb: gadget: s3c-hsotg: add multi count support")
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus

commit c724417baf162bd3e035659e22cdf990cfb0d917 upstream.

SuperSpeedPlus peripherals must report their bMaxPower of the
configuration descriptor in units of 8mA as per the USB 3.2
specification. The current switch statement in encode_bMaxPower()
only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so
the latter falls back to USB 2.0 encoding which uses 2mA units.
Replace the switch with a simple if/else.

Fixes: eae5820b852f ("usb: gadget: composite: Write SuperSpeedPlus config descriptors")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"

commit 807b9515b7d044cf77df31f1af9d842a76ecd5cb upstream.

Since commit e9d3009cb936 introduced a regression and since the fix for
that regression was not perfect, revert this commit.

Link: https://marc.info/?l=target-devel&m=158157054906195
Cc: Rahul Kundu <rahul.kundu@chelsio.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Reported-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout"

commit 76261ada16dcc3be610396a46d35acc3efbda682 upstream.

Since commit 04060db41178 introduces soft lockups when toggling network
interfaces, revert it.

Link: https://marc.info/?l=target-devel&m=158157054906196
Cc: Rahul Kundu <rahul.kundu@chelsio.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Reported-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Fixes: 04060db41178 ("scsi: RDMA/isert: Fix a recently introduced regression related to logout")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "dmaengine: imx-sdma: Fix memory leak"

This reverts commit af8eca600b408a0e59d2848dfcfad60413f626a9 which is
commit 02939cd167095f16328a1bd5cab5a90b550606df upstream.

Andreas writes:
This patch breaks our imx6 board with the attached trace.
Reverting the patch makes it boot again.

Reported-by: Andreas Tobler <andreas.tobler@onway.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents

commit e75fd33b3f744f644061a4f9662bd63f5434f806 upstream.

In btrfs_wait_ordered_range() once we find an ordered extent that has
finished with an error we exit the loop and don't wait for any other
ordered extents that might be still in progress.

All the users of btrfs_wait_ordered_range() expect that there are no more
ordered extents in progress after that function returns. So past fixes
such like the ones from the two following commits:

  ff612ba7849964 ("btrfs: fix panic during relocation after ENOSPC before
                   writeback happens")

  28aeeac1dd3080 ("Btrfs: fix panic when starting bg cache writeout after
                   IO error")

don't work when there are multiple ordered extents in the range.

Fix that by making btrfs_wait_ordered_range() wait for all ordered extents
even after it finds one that had an error.

Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: do not check delayed items are empty for single transaction cleanup

commit 1e90315149f3fe148e114a5de86f0196d1c21fa5 upstream.

btrfs_assert_delayed_root_empty() will check if the delayed root is
completely empty, but this is a filesystem-wide check.  On cleanup we
may have allowed other transactions to begin, for whatever reason, and
thus the delayed root is not empty.

So remove this check from cleanup_one_transation().  This however can
stay in btrfs_cleanup_transaction(), because it checks only after all of
the transactions have been properly cleaned up, and thus is valid.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: reset fs_root to NULL on error in open_ctree

commit 315bf8ef914f31d51d084af950703aa1e09a728c upstream.

While running my error injection script I hit a panic when we tried to
clean up the fs_root when freeing the fs_root.  This is because
fs_info->fs_root == PTR_ERR(-EIO), which isn't great.  Fix this by
setting fs_info->fs_root = NULL; if we fail to read the root.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix bytes_may_use underflow in prealloc error condtition

commit b778cf962d71a0e737923d55d0432f3bd287258e upstream.

I hit the following warning while running my error injection stress
testing:

  WARNING: CPU: 3 PID: 1453 at fs/btrfs/space-info.h:108 btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs]
  RIP: 0010:btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs]
  Call Trace:
  btrfs_free_reserved_data_space+0x4f/0x70 [btrfs]
  __btrfs_prealloc_file_range+0x378/0x470 [btrfs]
  elfcorehdr_read+0x40/0x40
  ? elfcorehdr_read+0x40/0x40
  ? btrfs_commit_transaction+0xca/0xa50 [btrfs]
  ? dput+0xb4/0x2a0
  ? btrfs_log_dentry_safe+0x55/0x70 [btrfs]
  ? btrfs_sync_file+0x30e/0x420 [btrfs]
  ? do_fsync+0x38/0x70
  ? __x64_sys_fdatasync+0x13/0x20
  ? do_syscall_64+0x5b/0x1b0
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happens if we fail to insert our reserved file extent.  At this
point we've already converted our reservation from ->bytes_may_use to
->bytes_reserved.  However once we break we will attempt to free
everything from [cur_offset, end] from ->bytes_may_use, but our extent
reservation will overlap part of this.

Fix this problem by adding ins.offset (our extent allocation size) to
cur_offset so we remove the actual remaining part from ->bytes_may_use.

I validated this fix using my inject-error.py script

python inject-error.py -o should_fail_bio -t cache_save_setup -t \
__btrfs_prealloc_file_range \
-t insert_reserved_file_extent.constprop.0 \
-r "-5" ./run-fsstress.sh

where run-fsstress.sh simply mounts and runs fsstress on a disk.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: apic: avoid calculating pending eoi from an uninitialized val

commit 23520b2def95205f132e167cf5b25c609975e959 upstream.

When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return
value of pv_eoi_get_pending() becomes random. Fix the issue by initializing
the variable.

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1

commit 91a5f413af596ad01097e59bf487eb07cb3f1331 upstream.

Even when APICv is disabled for L1 it can (and, actually, is) still
available for L2, this means we need to always call
vmx_deliver_nested_posted_interrupt() when attempting an interrupt
delivery.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Check IO instruction VM-exit conditions

commit 35a571346a94fb93b5b3b6a599675ef3384bc75c upstream.

Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution
controls when checking instruction interception. If the 'use IO bitmaps'
VM-execution control is 1, check the instruction access against the IO
bitmaps to determine if the instruction causes a VM-exit.

Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Refactor IO bitmap checks into helper function

commit e71237d3ff1abf9f3388337cfebf53b96df2020d upstream.

Checks against the IO bitmap are useful for both instruction emulation
and VM-exit reflection. Refactor the IO bitmap checks into a helper
function.

Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix race between writepages and enabling EXT4_EXTENTS_FL

commit cb85f4d23f794e24127f3e562cb3b54b0803f456 upstream.

If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running
on it, the following warning in ext4_add_complete_io() can be hit:

WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120

Here's a minimal reproducer (not 100% reliable) (root isn't required):

        while true; do
                sync
        done &
        while true; do
                rm -f file
                touch file
                chattr -e file
                echo X >> file
                chattr +e file
        done

The problem is that in ext4_writepages(), ext4_should_dioread_nolock()
(which only returns true on extent-based files) is checked once to set
the number of reserved journal credits, and also again later to select
the flags for ext4_map_blocks() and copy the reserved journal handle to
ext4_io_end::handle.  But if EXT4_EXTENTS_FL is being concurrently set,
the first check can see dioread_nolock disabled while the later one can
see it enabled, causing the reserved handle to unexpectedly be NULL.

Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races
related to doing so as well, fix this by synchronizing changing
EXT4_EXTENTS_FL with ext4_writepages() via the existing
s_writepages_rwsem (previously called s_journal_flag_rwsem).

This was originally reported by syzbot without a reproducer at
https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf,
but now that dioread_nolock is the default I also started seeing this
when running syzkaller locally.

Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org
Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com
Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: rename s_journal_flag_rwsem to s_writepages_rwsem

commit bbd55937de8f2754adc5792b0f8e5ff7d9c0420e upstream.

In preparation for making s_journal_flag_rwsem synchronize
ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA
flags (rather than just JOURNAL_DATA as it does currently), rename it to
s_writepages_rwsem.

Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix mount failure with quota configured as module

commit 9db176bceb5c5df4990486709da386edadc6bd1d upstream.

When CONFIG_QFMT_V2 is configured as a module, the test in
ext4_feature_set_ok() fails and so mount of filesystems with quota or
project features fails. Fix the test to use IS_ENABLED macro which
works properly even for modules.

Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz
Fixes: d65d87a07476 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix potential race between s_flex_groups online resizing and access

commit 7c990728b99ed6fbe9c75fc202fce1172d9916da upstream.

During an online resize an array of s_flex_groups structures gets replaced
so it can get enlarged. If there is a concurrent access to the array and
this memory has been reused then this can lead to an invalid memory access.

The s_flex_group array has been converted into an array of pointers rather
than an array of structures. This is to ensure that the information
contained in the structures cannot get out of sync during a resize due to
an accessor updating the value in the old structure after it has been
copied but before the array pointer is updated. Since the structures them-
selves are no longer copied but only the pointers to them this case is
mitigated.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix potential race between s_group_info online resizing and access

commit df3da4ea5a0fc5d115c90d5aa6caa4dd433750a7 upstream.

During an online resize an array of pointers to s_group_info gets replaced
so it can get enlarged. If there is a concurrent access to the array in
ext4_get_group_info() and this memory has been reused then this can lead to
an invalid memory access.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-3-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Balbir Singh <sblbir@amazon.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix potential race between online resizing and write operations

commit 1d0c3924a92e69bfa91163bda83c12a994b4d106 upstream.

During an online resize an array of pointers to buffer heads gets
replaced so it can get enlarged.  If there is a racing block
allocation or deallocation which uses the old array, and the old array
has gotten reused this can lead to a GPF or some other random kernel
memory getting modified.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-2-tytso@mit.edu
Reported-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add cond_resched() to __ext4_find_entry()

commit 9424ef56e13a1f14c57ea161eed3ecfdc7b2770e upstream.

We tested a soft lockup problem in linux 4.19 which could also
be found in linux 5.x.

When dir inode takes up a large number of blocks, and if the
directory is growing when we are searching, it's possible the
restart branch could be called many times, and the do while loop
could hold cpu a long time.

Here is the call trace in linux 4.19.

[  473.756186] Call trace:
[  473.756196]  dump_backtrace+0x0/0x198
[  473.756199]  show_stack+0x24/0x30
[  473.756205]  dump_stack+0xa4/0xcc
[  473.756210]  watchdog_timer_fn+0x300/0x3e8
[  473.756215]  __hrtimer_run_queues+0x114/0x358
[  473.756217]  hrtimer_interrupt+0x104/0x2d8
[  473.756222]  arch_timer_handler_virt+0x38/0x58
[  473.756226]  handle_percpu_devid_irq+0x90/0x248
[  473.756231]  generic_handle_irq+0x34/0x50
[  473.756234]  __handle_domain_irq+0x68/0xc0
[  473.756236]  gic_handle_irq+0x6c/0x150
[  473.756238]  el1_irq+0xb8/0x140
[  473.756286]  ext4_es_lookup_extent+0xdc/0x258 [ext4]
[  473.756310]  ext4_map_blocks+0x64/0x5c0 [ext4]
[  473.756333]  ext4_getblk+0x6c/0x1d0 [ext4]
[  473.756356]  ext4_bread_batch+0x7c/0x1f8 [ext4]
[  473.756379]  ext4_find_entry+0x124/0x3f8 [ext4]
[  473.756402]  ext4_lookup+0x8c/0x258 [ext4]
[  473.756407]  __lookup_hash+0x8c/0xe8
[  473.756411]  filename_create+0xa0/0x170
[  473.756413]  do_mkdirat+0x6c/0x140
[  473.756415]  __arm64_sys_mkdirat+0x28/0x38
[  473.756419]  el0_svc_common+0x78/0x130
[  473.756421]  el0_svc_handler+0x38/0x78
[  473.756423]  el0_svc+0x8/0xc
[  485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149]

Add cond_resched() to avoid soft lockup and to provide a better
system responding.

Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix a data race in EXT4_I(inode)->i_disksize

commit 35df4299a6487f323b0aca120ea3f485dfee2ae3 upstream.

EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by
KCSAN,

 BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4]

 write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127:
  ext4_write_end+0x4e3/0x750 [ext4]
  ext4_update_i_disksize at fs/ext4/ext4.h:3032
  (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046
  (inlined by) ext4_write_end at fs/ext4/inode.c:1287
  generic_perform_write+0x208/0x2a0
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37:
  ext4_writepages+0x10ac/0x1d00 [ext4]
  mpage_map_and_submit_extent at fs/ext4/inode.c:2468
  (inlined by) ext4_writepages at fs/ext4/inode.c:2772
  do_writepages+0x5e/0x130
  __writeback_single_inode+0xeb/0xb20
  writeback_sb_inodes+0x429/0x900
  __writeback_inodes_wb+0xc4/0x150
  wb_writeback+0x4bd/0x870
  wb_workfn+0x6b4/0x960
  process_one_work+0x54c/0xbe0
  worker_thread+0x80/0x650
  kthread+0x1e0/0x200
  ret_from_fork+0x27/0x50

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G        W  O L 5.5.0-next-20200204+ #5
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
 Workqueue: writeback wb_workfn (flush-7:0)

Since only the read is operating as lockless (outside of the
"i_data_sem"), load tearing could introduce a logic bug. Fix it by
adding READ_ONCE() for the read and WRITE_ONCE() for the write.

Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/1581085751-31793-1-git-send-email-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/kms/gv100-: Re-set LUT after clearing for modesets

[ Upstream commit f287d3d19769b1d22cba4e51fa0487f2697713c9 ]

While certain modeset operations on gv100+ need us to temporarily
disable the LUT, we make the mistake of sometimes neglecting to
reprogram the LUT after such modesets. In particular, moving a head from
one encoder to another seems to trigger this quite often. GV100+ is very
picky about having a LUT in most scenarios, so this causes the display
engine to hang with the following error code:

disp: chid 1 stat 00005080 reason 5 [INVALID_STATE] mthd 0200 data
00000001 code 0000002d)

So, fix this by always re-programming the LUT if we're clearing it in a
state where the wndw is still visible, and has a XLUT handle programmed.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: facaed62b4cb ("drm/nouveau/kms/gv100: initial support")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/stackdepot.c: fix global out-of-bounds in stack_slabs

[ Upstream commit 305e519ce48e935702c32241f07d393c3c8fed3e ]

Walter Wu has reported a potential case in which init_stack_slab() is
called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been
initialized.  In that case init_stack_slab() will overwrite
stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory
corruption.

Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com
Fixes: cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: qcom_geni_serial: Fix RX cancel command failure

[ Upstream commit 679aac5ead2f18d223554a52b543e1195e181811 ]

RX cancel command fails when BT is switched on and off multiple times.

To handle this, poll for the cancel bit in SE_GENI_S_IRQ_STATUS register
instead of SE_GENI_S_CMD_CTRL_REG.

As per the HPG update, handle the RX last bit after cancel command
and flush out the RX FIFO buffer.

Signed-off-by: satya priya <skakit@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1581415982-8793-1-git-send-email-skakit@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: qcom_geni_serial: Remove xfer_mode variable

[ Upstream commit bdc05a8a3f822ca0662464055f902faf760da6be ]

The driver only supports FIFO mode so setting and checking this variable
is unnecessary. If DMA support is ever added then such checks can be
introduced.

Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables

[ Upstream commit a85fb9ce1fab34a3216fd4d769fede643dbc68d4 ]

The variables of tx_wm and rx_wm were set to the same define value in
all cases, never updated, and the define was sometimes used
interchangably. Remove the variables/function and use the fixed value.

Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()

[ Upstream commit 9e06d55f7b856bfaf82036b50072600b21e52d20 ]

A frequent side comment has been to remove the use of writel_relaxed,
readl_relaxed, and mb. This reduces driver complexity and the _relaxed
variants were not known to provide any noticeable performance benefit.

Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>