pci: fold BAR mapping function into its caller

There is only one function, so no need for a function pointer.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pci: remove pci_register_bar()

Superceded by pci_register_bar_region().  The implementations
are folded together.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pci: convert pci rom to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pci: remove pci_register_bar_simple()

Superceded by pci_register_bar_region().

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

msix: convert to memory API

The msix table is defined as a subregion, to allow for a BAR that
mixes device specific regions with the msix table.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

xen-platform: convert to memory API

Since this device bypasses PCI and registers I/O ports directly with
the system bus, it needs further attention.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

uhci: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ehci: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sun4u: convert to memory API

fixes memory leak on repeated BAR map/unmap

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

isa-mmio: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

i6300esb: convert to memory API

Also add missing destructor.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pcnet: convert to memory API

Also related chips.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ne2000: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ppc: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

lsi53c895a: convert to memory API

An optimization that fast-pathed DMA reads from the SCRIPTS memory
was removed int the process.  Likely it breaks with iommus anyway.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

intel-hda: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ahci: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

virtio-pci: convert to memory API

except msix.

[jan: fix build]
[aliguori: fix build]

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ivshmem: convert to memory API

excluding msix.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ide: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

es1370: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

eepro100: convert to memory API

Note: the existing code aliases the flash BAR into the MMIO bar.  This is
probably a bug.  This patch does not correct the problem.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

e1000: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ac97: convert to memory API

fixes BAR sizing as well.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

rtl8139: convert to memory API

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pci: allow I/O BARs to be registered with pci_register_bar_region()

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pci: pass I/O address space to new PCI bus

This lets us register BARs in the I/O address space.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Integrate I/O memory regions into qemu

get_system_io() returns the root I/O memory region.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

cirrus: simplify linear framebuffer access functions

Make use of the memory API's ability to satisfy multi-byte accesses via
multiple single-byte accesses.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: simplify vga window mmio access functions

Make use of the memory API's ability to satisfy multi-byte accesses via
multiple single-byte accesses.

We have to keep vga_mem_{read,write}b() since they're used by cirrus.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

cirrus: simplify vga window mmio access functions

Make use of the memory API's ability to satisfy multi-byte accesses via
multiple single-byte accesses.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

cirrus: simplify bitblt BAR access functions

Make use of the memory API's ability to satisfy multi-byte accesses via
multiple single-byte accesses.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

cirrus: simplify mmio BAR access functions

Make use of the memory API's ability to satisfy multi-byte accesses via
multiple single-byte accesses.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: convert vga and its derivatives to the memory API

Convert all vga memory to the memory API.  Note we need to fall back to
get_system_memory(), since the various buses don't pass the vga window
as a memory region.

We no longer need to sync the dirty bitmap of the cirrus mapped memory
banks, since the memory API takes care of that for us.

[jan: fix vga-pci logging]

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vmsvga: don't remember pci BAR address in callback any more

We're going to remove the callback, so we can't use it to save the
address.  Use the pci API instead.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pci: add API to get a BAR's mapped address

Some (hacky) devices that have a back-channel to read this
address back outside the normal configuration mechanisms, such
as VMware svga.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

memory: rename PORTIO_END to PORTIO_END_OF_LIST

For consistency with other _END_OF_LIST macros.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Unbreak the build on ppc32

Signed-off-by: malc <av1474@comtv.ru>

Merge branch 'master' of git://git.qemu.org/qemu

Fix forcing multicast msgs to loopback on OpenBSD.

Fix forcing multicast msgs to loopback on OpenBSD.
e.g.
$ sudo qemu -m 128 -no-fd-bootchk \
        -hda virtual.img -boot n -nographic \
        -net nic,vlan=0,model=rtl8139,macaddr=52:54:00:12:34:03 \
        -net user -tftp /usr/src/sys/arch/i386/compile/TEST -bootp pxeboot \
        -net nic,vlan=1,model=rtl8139,macaddr=52:54:00:23:03:01 \
        -net tap,vlan=1,script=no \
        -net nic,vlan=3,model=rtl8139,macaddr=52:54:00:23:03:03 \
        -net socket,vlan=3,mcast=230.0.0.1:10003
setsockopt(SOL_IP, IP_MULTICAST_LOOP): Invalid argument
qemu: -net socket,vlan=3,mcast=230.0.0.1:10003: Device 'socket' could not be initialized

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Use mmap to allocate execute memory

Use mmap to allocate executable memory on NetBSD as well.

Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix network interface tap backend

Fix network interface tap backend work on NetBSD.
It uses an ioctl to get the tap name.

Signed-off-by: Christoph Egger<Christoph.Egger@amd.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

darwin-user: Remove two unused variables

cppcheck report:

darwin-user/signal.c:322: style: Unused variable: i
darwin-user/signal.c:322: style:
Variable 'err' is assigned a value that is never used

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

TCG: fix copy propagation

Copy propagation introduced in 22613af4a6d9602001e6d0e7b6d98aa40aa018dc
considered only global registers. However, register temps and stack
allocated locals must be handled differently because register temps
don't survive across brcond.

Fix by propagating only within same class of temps.

Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Remove unused is_softmmu parameter from cpu_handle_mmu_fault

Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.

Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix handling of conditional branches in delay slot of a conditional branch

Check whether dc->npc is dynamic before using its value for branch.

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Merge remote-tracking branch 'kiszka/queues/slirp' into staging

when overriding default tool names don't add cross-prefix

When overriding a tool name via a shell variable, don't
tack on the cross-prefix.  This specifically allows the
pkg-config command to be overridden and work where it
does not exist in some cross build environments.

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Reorganize and fix monitor resume after migration

If migration failed in migrate_fd_put_buffer, the monitor may have been
resumed not only in the error path of that function but also once again
in migrate_fd_put_ready which is called unconditionally by
migrate_fd_connect.

Fix this by establishing a cleaner policy: the monitor shall be resumed
when the migration file is closed, either via callback
(migrate_fd_close) or in migrate_fd_cleanup if no file is open (i.e. no
callback invoked).

Reported-By: Michael Tokarev <mjt@tls.msk.ru>
Tested-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

qdev: Eliminate duplicate reset

qbus_reset_all_fn was registered twice, so a lot of device reset
functions were also called twice when QEMU started.
Which was introduced by 80376c3fc2c38fdd45354e4b0eb45031f35587ed
This patch fixes it by making the main_system_bus creation not register
reset handler.

Cc: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Avoid allocating TCG resources in non-TCG mode

Do not allocate TCG-only resources like the translation buffer when
running over KVM or XEN. Saves a "few" bytes in the qemu address space
and is also conceptually cleaner.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

memory: use signed arithmetic

When trying to map an alias of a ram region, where the alias starts at
address A and we map it into address B, and A > B, we had an arithmetic
underflow.  Because we use unsigned arithmetic, the underflow converted
into a large number which failed addrrange_intersects() tests.

The concrete example which triggered this was cirrus vga mapping
the framebuffer at offsets 0xc0000-0xc7fff (relative to the start of
the framebuffer) into offsets 0xa0000 (relative to system addres space
start).

With our favorite analogy of a windowing system, this is equivalent to
dragging a subwindow off the left edge of the screen, and failing to clip
it into its parent window which is on screen.

Fix by switching to signed arithmetic.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

memory: synchronize dirty bitmap before unmapping a range

When a range is being unmapped, ask accelerators (e.g. kvm) to synchronize the
dirty bitmap to avoid losing information forever.

Fixes grub2 screen update.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Refactor sdl_send_mouse_event

Replace width/height globals with the identical values from real_screen,
refactor the function according to our coding style.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Factor out event handlers from sdl_refresh

No functional changes.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Add zoom hot keys

Allow to enlarge or shrink the screen via CTRL-ALT-+/-. In contrast to
scaling the window, these controls always preserve the aspect ratio of
the current console.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Dynamically grab input in absolute mouse mode

Not grabbing the input means that special keys like ALT+TAB are still
handled by the host. Improve the usability by grabbing input once the
mouse is inside the guest screen, provided the SDL window has the input
focus. Release it again when the mouse is moved to any border. Also grab
the input when we gain the input focus and the mouse is within the
screen limits.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Fix cursor handling when switching consoles in absolute mouse mode

Restore the cursor when switching from graphic to text console while the
mouse is in absolute mode. Disable it again when returning.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Never release input while in full screen mode

It's confusing to suddenly find two mice in full screen mode when
switching consoles or accidentally hitting the grab hot keys.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Consistently avoid grabbing input for text consoles

There were some preexisting bits that released the input when switching
to text console. This patch spreads this logic consistently and also
avoids grabbing the input while a text console is active.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Initialize gui_fullscreen earlier during setup

This ensures that we actually enter full screen on startup when e.g.
'-vga none -full-screen' was specified.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Drop bogus gui_fullscreen_initial_grab

There must be no difference between initial -full-screen and switching
to this mode via the hot key.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Restore scaling mode on return from full screen

Save the scaling mode and its geometry when going full screen, restore
it when returning to windowed mode.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Fix full screen toggling from scaled mode

When switching to full screen mode from a scaled window, we need to
resize to DisplayState's dimension, not the scaled "real" screen size.
Moreover, scaling mode may have manipulated the bpp. So we need to
restore it from the DisplayState as well.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Properly mark modifier+u as hotkey

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Avoid redundant scaling deactivation

Prevents screen flickering.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Do not make full screen mode resizable

This prevents continuous resizing events and improper screen setups when
going full screen.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

sdl: Fix termination in -no-shutdown mode

Just like the monitor does, we need to clear no_shutdown before calling
qemu_system_shutdown_request on quit requests. Otherwise, QEMU just
stops the VM.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Check fread() results to avoid gcc 4.6 warnings

When compiling with gcc 4.6, some code in fw_cfg.c complains that fop_ret
is assigned but not used (which is true).  However, it looks like the
meaningless assignments to fop_ret were done to suppress other gcc warnings
due to the fact that fread() is labelled as warn_unused_result in glibc.

This patch avoids both errors, by actually checking the fread() result code
and dropping out with an error message if it fails.

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

MAINTAINERS: add entry for Xen

Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

qcow2: Fix L1 table size after bdrv_snapshot_goto

When loading an internal snapshot whose L1 table is smaller than the current L1
table, the size of the current L1 would be shrunk to the snapshot's L1 size in
memory, but not on disk. This lead to incorrect refcount updates and eventuelly
to image corruption.

Instead of writing the new L1 size to disk, this simply retains the bigger L1
size that is currently in use and makes sure that the unused part is zeroed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

slirp: Only start packet expiration for delayed ones

The expiration timeout must only affect packets that are queued due to
pending ARP resolutions. The old version broke ping e.g.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

slirp: Read current time only once per if_start call

No need to update the current time for each packet we send from the
queue. Processing time is comparably short.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

slirp: Fix types of IP address parameters

Should be uint32_t for IPv4, not int. Also avoid in_addr_t without
proper includes. Fixes build regression on mingw32.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

Merge branch 'master' of git://git.qemu.org/qemu

Merge remote-tracking branch 'mst/for_anthony' into staging

Merge remote-tracking branch 'alon/pull-libcacard.data' into staging

Merge remote-tracking branch 'stefanha/trivial-patches' into staging

Merge remote-tracking branch 'spice/spice.v40' into staging

Merge remote-tracking branch 'kiszka/queues/slirp' into staging

Merge remote-tracking branch 'kraxel/usb.22' into staging

Merge remote-tracking branch 'kwolf/for-anthony' into staging

guest agent: add --enable-guest-agent config option

QAPI will require glib/python, but for now the guest agent is the only
user. For now, make these dependencies an explicit guest agent one, and
give users the option to disable it if need be.

Once QAPI is adopted in core QEMU code, we would basically revert this
patch.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Add support for finding libpng via pkg-config.

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

alpha-softmmu: Disable for the 0.15 release branch.

The system emulation code was not merged before the branch.
Let's leave that work for the next release.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

configure: Fix bad shell expression for non-Linux hosts

With vhost_net="" (most non-Linux hosts), configure prints an
error message:

test: 2551: =: unexpected operator

Fix this and similar code by adding the missing "".

Cc: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

virtio-balloon: Unregister savevm section on device unplug

Migrating after unplugging a virtio-balloon device resulted in an error
message on the destination:

Unknown savevm section or instance '0000:00:04.0/virtio-balloon' 0
load of migration failed

Fix this by unregistering the section on device unplug.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: Add exit handler, fix memleaks

Add an exit handler that will free up RAM after a virtio-balloon device
is unplugged.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

balloon: Reject negative balloon values

Negative balloon values don't make sense, reject them and throw a qerror
with QERR_INVALID_PARAMETER_VALUE.

Reported-by: Mike Cao <bcao@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: Check if balloon registration failed

Multiple balloon registrations are not allowed; check if the
registration with the qemu balloon api succeeded.  If not, fail the
device init.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

balloon: Don't allow multiple balloon handler registrations

Multiple balloon devices don't make sense; disallow more than one
registration attempt to register handlers.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: Fix header comment; add Copyright

Signed-off-by: Amit Shah <amit.shah@redhat.com>

balloon: Fix header comment; add Copyright

Signed-off-by: Amit Shah <amit.shah@redhat.com>

balloon: Separate out stat and balloon handling

Passing on '0' as ballooning target to indicate retrieval of stats is
bad API.  It also makes 'balloon 0' in the monitor cause a segfault.
Have two different functions handle the different functionality instead.

Detailed explanation from Markus's review:

1. do_info_balloon() is an info_async() method.  It receives a callback
   with argument, to be called exactly once (callback frees the
   argument).  It passes the callback via qemu_balloon_status() and
   indirectly through qemu_balloon_event to virtio_balloon_to_target().

   virtio_balloon_to_target() executes its balloon stats half.  It
   stores the callback in the device state.

   If it can't send a stats request, it resets stats and calls the
   callback right away.

   Else, it sends a stats request.  The device model runs the callback
   when it receives the answer.

   Works.

2. do_balloon() is a cmd_async() method.  It receives a callback with
   argument, to be called when the command completes.  do_balloon()
   calls it right before it succeeds.  Odd, but should work.

   Nevertheless, it passes the callback on via qemu_ballon() and
   indirectly through qemu_balloon_event to virtio_balloon_to_target().

   a. If the argument is non-zero, virtio_balloon_to_target() executes
      its balloon half, which doesn't use the callback in any way.

      Odd, but works.

   b. If the argument is zero, virtio_balloon_to_target() executes its
      balloon stats half, just like in 1.  It either calls the callback
      right away, or arranges for it to be called later.

      Thus, the callback runs twice: use after free and double free.

Test case: start with -S -device virtio-balloon, execute "balloon 0" in
human monitor.  Runs the callback first from virtio_balloon_to_target(),
then again from do_balloon().

Reported-by: Mike Cao <bcao@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

virtio-balloon: Separate status handling into separate function

Separate out the code to retrieve balloon info from the code that sets
balloon values.

This will be used to separate the two callbacks from balloon.c and help
cope with 'balloon 0' on the monitor.  Currently, 'balloon 0' causes a
segfault in monitor_resume().

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

balloon: Simplify code flow

Replace:
  if (foo) {
    ...
  } else {
    return 0;
  }

by

  if (!foo) {
    return 0;
  }
  ...

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

balloon: Add braces around if statements

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

balloon: Make functions, local vars static

balloon.h had function declarations for a couple of functions that are
local to balloon.c.  Make them static.

Drop the 'qemu_' prefix for balloon.c-local variables, and make them
static.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

bluetooth: kill dummy usb device, use hid code directly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hid: move idle+protocol from usb-hid to hid too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>