Tom Gundersen [Thu, 31 Oct 2013 07:44:49 +0000 (00:44 -0700)]
Input: mousedev - allow disabling even without CONFIG_EXPERT
commit
dfaaed08ecc01bd513248ba7999daf50ce028352 upstream.
Moust (if not all) modern software, including X, uses /dev/eventX rather than
the legacy /dev/mouseX devices. It therefore makes sense for general-purpose
(distro) kernels to use MOUSEDV=m (or even n), so let's drop the EXPERT=y
requirement.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Gundersen [Thu, 31 Oct 2013 07:38:30 +0000 (00:38 -0700)]
Input: allow deselecting serio drivers even without CONFIG_EXPERT
commit
bcd2623073e98f69f84720308db0b142c4da0bd6 upstream.
There is plenty of consumer hardware (e.g., mac books) that does not use AT
keyboards or PS/2 mice. It therefore makes sense for distro kernels to
build the related drivers as modules to avoid loading them on hardware that
does not need them. As such, these options should no longer be protected by
EXPERT.
Moreover, building these drivers as modules gets rid of the following ugly
error during boot:
[ 2.337745] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.439537] i8042: No controller found
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Landden [Mon, 25 Nov 2013 06:36:28 +0000 (22:36 -0800)]
net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST
commit
d3f7d56a7a4671d395e8af87071068a195257bf6 upstream.
Commit
35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once)
added an internal flag MSG_SENDPAGE_NOTLAST, similar to
MSG_MORE.
algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages()
and need to see the new flag as identical to MSG_MORE.
This fixes sendfile() on AF_ALG.
v3: also fix udp
Cc: Tom Herbert <therbert@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com>
Original-patch: Richard Weinberger <richard@nod.at>
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laxman Dewangan [Mon, 25 Nov 2013 14:09:47 +0000 (19:39 +0530)]
irq: Enable all irqs unconditionally in irq_resume
commit
ac01810c9d2814238f08a227062e66a35a0e1ea2 upstream.
When the system enters suspend, it disables all interrupts in
suspend_device_irqs(), including the interrupts marked EARLY_RESUME.
On the resume side things are different. The EARLY_RESUME interrupts
are reenabled in sys_core_ops->resume and the non EARLY_RESUME
interrupts are reenabled in the normal system resume path.
When suspend_noirq() failed or suspend is aborted for any other
reason, we might omit the resume side call to sys_core_ops->resume()
and therefor the interrupts marked EARLY_RESUME are not reenabled and
stay disabled forever.
To solve this, enable all irqs unconditionally in irq_resume()
regardless whether interrupts marked EARLY_RESUMEhave been already
enabled or not.
This might try to reenable already enabled interrupts in the non
failure case, but the only affected platform is XEN and it has been
confirmed that it does not cause any side effects.
[ tglx: Massaged changelog. ]
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Cc: <ian.campbell@citrix.com>
Cc: <rjw@rjwysocki.net>
Cc: <len.brown@intel.com>
Cc: <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Gang [Fri, 22 Nov 2013 08:12:40 +0000 (16:12 +0800)]
powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536
commit
1aeef303b5d9e243c41d5b80f8bb059366514a10 upstream.
For MPC8572/MPC8536, the status of GPIOs defined as output
cannot be determined by reading GPDAT register, so the code
use shadow data register instead. But the code may give the
wrong status of GPIOs defined as input under some scenarios:
1. If some pins were configured as inputs and were asserted
high before booting the kernel, the shadow data has been
initialized with those pin values.
2. Some pins have been configured as output first and have
been set to the high value, then reconfigured as input.
The above cases will make the shadow data for those input
pins to be set to high. Then reading the pin status will
always return high even if the actual pin status is low.
The code should eliminate the effects of the shadow data to
the input pins, and the status of those pins should be
read directly from GPDAT.
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Tue, 19 Nov 2013 21:34:14 +0000 (16:34 -0500)]
NFSv4: Update list of irrecoverable errors on DELEGRETURN
commit
c97cf606e43b85a6cf158b810375dd77312024db upstream.
If the DELEGRETURN errors out with something like NFS4ERR_BAD_STATEID
then there is no recovery possible. Just quit without returning an error.
Also, note that the client must not assume that the NFSv4 lease has been
renewed when it sees an error on DELEGRETURN.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Thu, 28 Nov 2013 13:33:52 +0000 (14:33 +0100)]
net: smc91: fix crash regression on the versatile
commit
a0c20fb02592d372e744d1d739cda3e1b3defaae upstream.
After commit
e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90
"net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data"
The Versatile SMSC LAN91C111 is crashing like this:
------------[ cut here ]------------
kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in:
CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24
task:
c6ccfaa0 ti:
c6cd0000 task.ti:
c6cd0000
PC is at smc_hardware_send_pkt+0x198/0x22c
LR is at smc_hardware_send_pkt+0x24/0x22c
pc : [<
c01be324>] lr : [<
c01be1b0>] psr:
20000013
sp :
c6cd1d08 ip :
00000001 fp :
00000000
r10:
c02adb08 r9 :
00000000 r8 :
c6ced802
r7 :
c786fba0 r6 :
00000146 r5 :
c8800000 r4 :
c78d6000
r3 :
0000000f r2 :
00000146 r1 :
00000000 r0 :
00000031
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control:
0005317f Table:
06cf4000 DAC:
00000015
Process udhcpc (pid: 43, stack limit = 0xc6cd01c0)
Stack: (0xc6cd1d08 to 0xc6cd2000)
1d00:
00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868
1d20:
c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60
1d40:
00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000
1d60:
c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000
1d80:
c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000
1da0:
c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000
1dc0:
00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000
1de0:
00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740
1e00:
01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff
1e20:
43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc
1e40:
00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88
1e60:
c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1e80:
00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0
1ea0:
00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08
1ec0:
00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000
1ee0:
00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000
1f00:
00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002
1f20:
06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c
1f40:
00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0
1f60:
00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0
1f80:
00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8
1fa0:
c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000
1fc0:
be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000
1fe0:
00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000
[<
c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<
c01be868>] (smc_hard_start_xmit+0xc4/0x1e8)
[<
c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<
c0208554>] (dev_hard_start_xmit+0x460/0x4cc)
[<
c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<
c021d1d8>] (sch_direct_xmit+0x94/0x18c)
[<
c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<
c02087f8>] (dev_queue_xmit+0x238/0x42c)
[<
c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<
c027ba74>] (packet_sendmsg+0xbe8/0xd28)
[<
c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<
c01f2870>] (sock_sendmsg+0x84/0xa8)
[<
c01f2870>] (sock_sendmsg+0x84/0xa8) from [<
c01f4628>] (SyS_sendto+0xb8/0xdc)
[<
c01f4628>] (SyS_sendto+0xb8/0xdc) from [<
c0013840>] (ret_fast_syscall+0x0/0x2c)
Code:
e3130002 1a000001 e3130001 0affffcd (
e7f001f2)
---[ end trace
81104fe70e8da7fe ]---
Kernel panic - not syncing: Fatal exception in interrupt
This is because the macro operations in smc91x.h defined
for Versatile are missing SMC_outsw() as used in this
commit.
The Versatile needs and uses the same accessors as the other
platforms in the first if(...) clause, just switch it to using
that and we have one problem less to worry about.
This includes a hunk of a patch from Will Deacon fixin
the other 32bit platforms as well: Innokom, Ramses, PXA,
PCM027.
Checkpatch complains about spacing, but I have opted to
follow the style of this .h-file.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen M. Cameron [Fri, 1 Nov 2013 16:02:25 +0000 (11:02 -0500)]
SCSI: hpsa: return 0 from driver probe function on success, not 1
commit
88bf6d62db4393fa03a58bada9d746312d5b496f upstream.
A return value of 1 is interpreted as an error. See pci_driver.
in local_pci_probe(). If you're wondering how this ever could
have worked, it's because it used to be the case that only return
values less than zero were interpreted as failure. But even in
the current kernel if the driver registers its various entry
points with the kernel, and then returns a value which is
interpreted as failure, those registrations aren't undone, so
the driver still mostly works. However, the driver's remove
function wouldn't be called on rmmod, and pci power management
functions wouldn't work. In the case of Smart Array, since it
has a battery backed cache (or else no cache) even if the driver
is not shut down properly as long as there is no outstanding
i/o, nothing too bad happens, which is why it took so long to
notice.
Requesting backport to stable because the change to pci-driver.c
which requires driver probe functions to return 0 occurred between
2.6.35 and 2.6.36 (the pci power management breakage) and again
between 3.7 and 3.8 (pci_dev->driver getting set to NULL in
local_pci_probe() preventing driver remove function from being
called on rmmod.)
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen M. Cameron [Mon, 23 Sep 2013 18:33:41 +0000 (13:33 -0500)]
SCSI: hpsa: do not discard scsi status on aborted commands
commit
2e311fbabdc23b7eaec77313dc3b9a151a5407b5 upstream.
We inadvertantly discarded the scsi status for aborted commands.
For some commands (e.g. reads from tape drives) these can't be retried,
and if we discarded the scsi status, the scsi mid layer couldn't notice
anything was wrong and the error was not reported.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Wed, 23 Oct 2013 01:35:19 +0000 (18:35 -0700)]
SCSI: libsas: fix usage of ata_tf_to_fis
commit
ae5fbae0ccd982dfca0ce363036ed92f5b13f150 upstream.
Since commit
110dd8f19df5 "[SCSI] libsas: fix scr_read/write users and
update the libata documentation" we have been passing pmp=1 and is_cmd=0
to ata_tf_to_fis(). Praveen reports that eSATA attached drives do not
discover correctly. His investigation found that the BIOS was passing
pmp=0 while Linux was passing pmp=1 and failing to discover the drives.
Update libsas to follow the libata example of pulling the pmp setting
from the ata_link and correct is_cmd to be 1 since all tf's submitted
through ->qc_issue are commands. Presumably libsas lldds do not care
about is_cmd as they have sideband mechanisms to perform link
management.
http://marc.info/?l=linux-scsi&m=
138179681726990
[jejb: checkpatch fix]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Bottomley [Fri, 15 Nov 2013 22:58:00 +0000 (14:58 -0800)]
SCSI: enclosure: fix WARN_ON in dual path device removing
commit
a1470c7bf3a4676e62e4c0fb204e339399eb5c59 upstream.
Bug report from: wenxiong@linux.vnet.ibm.com
The issue is happened in dual controller configuration. We got the
sysfs warnings when rmmod the ipr module.
enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister()
for each componment deivce, device_unregister() ->device_del()->kobject_del()
->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL.
For each componment device,
enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link()
in which checking kobj->sd again, it has been set as NULL when doing
device_unregister. So we saw all these sysfs WARNING.
Tested-by: wenxiong@linux.vnet.ibm.com
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bo Shen [Tue, 3 Dec 2013 10:04:54 +0000 (18:04 +0800)]
ASoC: wm8731: fix dsp mode configuration
commit
b4af6ef99a60c5b56df137d7accd81ba1ee1254e upstream.
According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it
works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0.
So, fix LRP for DSP mode as the datesheet specification.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Fri, 22 Nov 2013 14:17:18 +0000 (14:17 +0000)]
ASoC: wm8990: Mark the register map as dirty when powering down
commit
2ab2b74277a86afe0dd92976db695a2bb8b93366 upstream.
Otherwise we'll skip sync on resume.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Lendacky [Tue, 12 Nov 2013 17:46:04 +0000 (11:46 -0600)]
crypto: authenc - Find proper IV address in ablkcipher callback
commit
fc019c7122dfcd69c50142b57a735539aec5da95 upstream.
When performing an asynchronous ablkcipher operation the authenc
completion callback routine is invoked, but it does not locate and use
the proper IV.
The callback routine, crypto_authenc_encrypt_done, is updated to use
the same method of calculating the address of the IV as is done in
crypto_authenc_encrypt function which sets up the callback.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Horia Geanta [Thu, 28 Nov 2013 13:11:15 +0000 (15:11 +0200)]
crypto: ccm - Fix handling of zero plaintext when computing mac
commit
5638cabf3e4883f38dfb246c30980cebf694fbda upstream.
There are cases when cryptlen can be zero in crypto_ccm_auth():
-encryptiom: input scatterlist length is zero (no plaintext)
-decryption: input scatterlist contains only the mac
plus the condition of having different source and destination buffers
(or else scatterlist length = max(plaintext_len, ciphertext_len)).
These are not handled correctly, leading to crashes like:
root@p4080ds:~/crypto# insmod tcrypt.ko mode=45
------------[ cut here ]------------
kernel BUG at crypto/scatterwalk.c:37!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=8 P4080 DS
Modules linked in: tcrypt(+) crc32c xts xcbc vmac pcbc ecb gcm ghash_generic gf128mul ccm ctr seqiv
CPU: 3 PID: 1082 Comm: cryptomgr_test Not tainted 3.11.0 #14
task:
ee12c5b0 ti:
eecd0000 task.ti:
eecd0000
NIP:
c0204d98 LR:
f9225848 CTR:
c0204d80
REGS:
eecd1b70 TRAP: 0700 Not tainted (3.11.0)
MSR:
00029002 <CE,EE,ME> CR:
22044022 XER:
20000000
GPR00:
f9225c94 eecd1c20 ee12c5b0 eecd1c28 ee879400 ee879400 00000000 ee607464
GPR08:
00000001 00000001 00000000 006b0000 c0204d80 00000000 00000002 c0698e20
GPR16:
ee987000 ee895000 fffffff4 ee879500 00000100 eecd1d58 00000001 00000000
GPR24:
ee879400 00000020 00000000 00000000 ee5b2800 ee607430 00000004 ee607460
NIP [
c0204d98] scatterwalk_start+0x18/0x30
LR [
f9225848] get_data_to_compute+0x28/0x2f0 [ccm]
Call Trace:
[
eecd1c20] [
f9225974] get_data_to_compute+0x154/0x2f0 [ccm] (unreliable)
[
eecd1c70] [
f9225c94] crypto_ccm_auth+0x184/0x1d0 [ccm]
[
eecd1cb0] [
f9225d40] crypto_ccm_encrypt+0x60/0x2d0 [ccm]
[
eecd1cf0] [
c020d77c] __test_aead+0x3ec/0xe20
[
eecd1e20] [
c020f35c] test_aead+0x6c/0xe0
[
eecd1e40] [
c020f420] alg_test_aead+0x50/0xd0
[
eecd1e60] [
c020e5e4] alg_test+0x114/0x2e0
[
eecd1ee0] [
c020bd1c] cryptomgr_test+0x4c/0x60
[
eecd1ef0] [
c0047058] kthread+0xa8/0xb0
[
eecd1f40] [
c000eb0c] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
0f080000 81290024 552807fe 0f080000 5529003a 4bffffb4 90830000 39400000
39000001 8124000c 2f890000 7d28579e <
0f090000>
81240008 91230004 4e800020
---[ end trace
6d652dfcd1be37bd ]---
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Lendacky [Tue, 12 Nov 2013 17:46:10 +0000 (11:46 -0600)]
crypto: scatterwalk - Set the chain pointer indication bit
commit
41da8b5adba77e22584f8b45f9641504fa885308 upstream.
The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain
function to chain two scatterlists, but the chain pointer indication
bit is not set. When the resulting scatterlist is used, for example,
by sg_nents to count the number of scatterlist entries, a segfault occurs
because sg_nents does not follow the chain pointer to the chained scatterlist.
Update scatterwalk_sg_chain to set the chain pointer indication bit as is
done by the sg_chain function.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 8 Dec 2013 16:12:17 +0000 (08:12 -0800)]
Linux 3.4.73
Mikulas Patocka [Mon, 14 Oct 2013 16:11:36 +0000 (12:11 -0400)]
blk-core: Fix memory corruption if blkcg_init_queue fails
commit
fff4996b7db7955414ac74386efa5e07fd766b50 upstream.
If blkcg_init_queue fails, blk_alloc_queue_node doesn't call bdi_destroy
to clean up structures allocated by the backing dev.
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:260 debug_print_object+0x85/0xa0()
ODEBUG: free active (active state 0) object type: percpu_counter hint: (null)
Modules linked in: dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev ipt_MASQUERADE iptable_nat nf_nat_ipv4 msr nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack lm85 hwmon_vid snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq freq_table mperf sata_svw serverworks kvm_amd ide_core ehci_pci ohci_hcd libata ehci_hcd kvm usbcore tg3 usb_common libphy k10temp pcspkr ptp i2c_piix4 i2c_core evdev microcode hwmon rtc_cmos pps_core e100 skge floppy mii processor button unix
CPU: 0 PID: 2739 Comm: lvchange Tainted: G W
3.10.15-devel #14
Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009
0000000000000009 ffff88023c3c1ae8 ffffffff813c8fd4 ffff88023c3c1b20
ffffffff810399eb ffff88043d35cd58 ffffffff81651940 ffff88023c3c1bf8
ffffffff82479d90 0000000000000005 ffff88023c3c1b80 ffffffff81039a67
Call Trace:
[<
ffffffff813c8fd4>] dump_stack+0x19/0x1b
[<
ffffffff810399eb>] warn_slowpath_common+0x6b/0xa0
[<
ffffffff81039a67>] warn_slowpath_fmt+0x47/0x50
[<
ffffffff8122aaaf>] ? debug_check_no_obj_freed+0xcf/0x250
[<
ffffffff81229a15>] debug_print_object+0x85/0xa0
[<
ffffffff8122abe3>] debug_check_no_obj_freed+0x203/0x250
[<
ffffffff8113c4ac>] kmem_cache_free+0x20c/0x3a0
[<
ffffffff811f6709>] blk_alloc_queue_node+0x2a9/0x2c0
[<
ffffffff811f672e>] blk_alloc_queue+0xe/0x10
[<
ffffffffa04c0093>] dm_create+0x1a3/0x530 [dm_mod]
[<
ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
[<
ffffffffa04c6c07>] dev_create+0x57/0x2b0 [dm_mod]
[<
ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
[<
ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
[<
ffffffffa04c6528>] ctl_ioctl+0x268/0x500 [dm_mod]
[<
ffffffff81097662>] ? get_lock_stats+0x22/0x70
[<
ffffffffa04c67ce>] dm_ctl_ioctl+0xe/0x20 [dm_mod]
[<
ffffffff81161aad>] do_vfs_ioctl+0x2ed/0x520
[<
ffffffff8116cfc7>] ? fget_light+0x377/0x4e0
[<
ffffffff81161d2b>] SyS_ioctl+0x4b/0x90
[<
ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
---[ end trace
4b5ff0d55673d986 ]---
------------[ cut here ]------------
This fix should be backported to stable kernels starting with 2.6.37. Note
that in the kernels prior to 3.5 the affected code is different, but the
bug is still there - bdi_init is called and bdi_destroy isn't.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Fri, 1 Mar 2013 22:45:44 +0000 (22:45 +0000)]
dm: fix truncated status strings
commit
fd7c092e711ebab55b2688d3859d95dfd0301f73 upstream.
Avoid returning a truncated table or status string instead of setting
the DM_BUFFER_FULL_FLAG when the last target of a table fills the
buffer.
When processing a table or status request, the function retrieve_status
calls ti->type->status. If ti->type->status returns non-zero,
retrieve_status assumes that the buffer overflowed and sets
DM_BUFFER_FULL_FLAG.
However, targets don't return non-zero values from their status method
on overflow. Most targets returns always zero.
If a buffer overflow happens in a target that is not the last in the
table, it gets noticed during the next iteration of the loop in
retrieve_status; but if a buffer overflow happens in the last target, it
goes unnoticed and erroneously truncated data is returned.
In the current code, the targets behave in the following way:
* dm-crypt returns -ENOMEM if there is not enough space to store the
key, but it returns 0 on all other overflows.
* dm-thin returns errors from the status method if a disk error happened.
This is incorrect because retrieve_status doesn't check the error
code, it assumes that all non-zero values mean buffer overflow.
* all the other targets always return 0.
This patch changes the ti->type->status function to return void (because
most targets don't use the return code). Overflow is detected in
retrieve_status: if the status method fills up the remaining space
completely, it is assumed that buffer overflow happened.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomoki Sekiyama [Tue, 15 Oct 2013 22:42:19 +0000 (16:42 -0600)]
elevator: acquire q->sysfs_lock in elevator_change()
commit
7c8a3679e3d8e9d92d58f282161760a0e247df97 upstream.
Add locking of q->sysfs_lock into elevator_change() (an exported function)
to ensure it is held to protect q->elevator from elevator_init(), even if
elevator_change() is called from non-sysfs paths.
sysfs path (elv_iosched_store) uses __elevator_change(), non-locking
version, as the lock is already taken by elv_iosched_store().
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Stecklina [Wed, 9 Oct 2013 08:03:52 +0000 (10:03 +0200)]
iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits
commit
f9423606ade08653dd8a43334f0a7fb45504c5cc upstream.
The BUG_ON in drivers/iommu/intel-iommu.c:785 can be triggered from userspace via
VFIO by calling the VFIO_IOMMU_MAP_DMA ioctl on a vfio device with any address
beyond the addressing capabilities of the IOMMU. The problem is that the ioctl code
calls iommu_iova_to_phys before it calls iommu_map. iommu_map handles the case that
it gets addresses beyond the addressing capabilities of its IOMMU.
intel_iommu_iova_to_phys does not.
This patch fixes iommu_iova_to_phys to return NULL for addresses beyond what the
IOMMU can handle. This in turn causes the ioctl call to fail in iommu_map and
(correctly) return EFAULT to the user with a helpful warning message in the kernel
log.
Signed-off-by: Julian Stecklina <jsteckli@os.inf.tu-dresden.de>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Levin [Tue, 19 Nov 2013 19:25:36 +0000 (14:25 -0500)]
video: kyro: fix incorrect sizes when copying to userspace
commit
2ab68ec927310dc488f3403bb48f9e4ad00a9491 upstream.
kyro would copy u32s and specify sizeof(unsigned long) as the size to copy.
This would copy more data than intended and cause memory corruption and might
leak kernel memory.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanislav Kinsbursky [Mon, 10 Dec 2012 09:19:04 +0000 (12:19 +0300)]
nfsd: use "init_net" for portmapper
commit
f7fb86c6e639360ad9c253cec534819ef928a674 upstream.
There could be a situation, when NFSd was started in one network namespace, but
stopped in another one.
This will trigger kernel panic, because RPCBIND client is stored on per-net
NFSd data, and will be NULL on NFSd shutdown.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KOBAYASHI Yoshitake [Sat, 6 Jul 2013 22:35:45 +0000 (07:35 +0900)]
mmc: block: fix a bug of error handling in MMC driver
commit
c8760069627ad3b0dbbea170f0c4c58b16e18d3d upstream.
Current MMC driver doesn't handle generic error (bit19 of device
status) in write sequence. As a result, write data gets lost when
generic error occurs. For example, a generic error when updating a
filesystem management information causes a loss of write data and
corrupts the filesystem. In the worst case, the system will never
boot.
This patch includes the following functionality:
1. To enable error checking for the response of CMD12 and CMD13
in write command sequence
2. To retry write sequence when a generic error occurs
Messages are added for v2 to show what occurs.
Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 28 Aug 2013 20:31:52 +0000 (22:31 +0200)]
HID: picolcd_core: validate output report details
commit
1e87a2456b0227ca4ab881e19a11bb99d164e792 upstream.
A HID device could send a malicious output report that would cause the
picolcd HID driver to trigger a NULL dereference during attr file writing.
[jkosina@suse.cz: changed
report->maxfield < 1
to
report->maxfield != 1
as suggested by Bruno].
CVE-2013-2899
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[Kefeng: backported to stable 3.4: adjust filename]
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fan.du [Sun, 1 Dec 2013 08:28:48 +0000 (16:28 +0800)]
{pktgen, xfrm} Update IPv4 header total len and checksum after tranformation
[ Upstream commit
3868204d6b89ea373a273e760609cb08020beb1a ]
commit
a553e4a6317b2cfc7659542c10fe43184ffe53da ("[PKTGEN]: IPSEC support")
tried to support IPsec ESP transport transformation for pktgen, but acctually
this doesn't work at all for two reasons(The orignal transformed packet has
bad IPv4 checksum value, as well as wrong auth value, reported by wireshark)
- After transpormation, IPv4 header total length needs update,
because encrypted payload's length is NOT same as that of plain text.
- After transformation, IPv4 checksum needs re-caculate because of payload
has been changed.
With this patch, armmed pktgen with below cofiguration, Wireshark is able to
decrypted ESP packet generated by pktgen without any IPv4 checksum error or
auth value error.
pgset "flag IPSEC"
pgset "flows 1"
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Fri, 29 Nov 2013 05:39:44 +0000 (06:39 +0100)]
ipv6: fix possible seqlock deadlock in ip6_finish_output2
[ Upstream commit
7f88c6b23afbd31545c676dea77ba9593a1a14bf ]
IPv6 stats are 64 bits and thus are protected with a seqlock. By not
disabling bottom-half we could deadlock here if we don't disable bh and
a softirq reentrantly updates the same mib.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 28 Nov 2013 17:51:22 +0000 (09:51 -0800)]
inet: fix possible seqlock deadlocks
[ Upstream commit
f1d8cba61c3c4b1eb88e507249c4cb8d635d9a76 ]
In commit
c9e9042994d3 ("ipv4: fix possible seqlock deadlock") I left
another places where IP_INC_STATS_BH() were improperly used.
udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from
process context, not from softirq context.
This was detected by lockdep seqlock support.
Reported-by: jongman heo <jongman.heo@samsung.com>
Fixes:
584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP")
Fixes:
c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Landden [Mon, 25 Nov 2013 06:36:28 +0000 (22:36 -0800)]
net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST
[ Upstream commit
d3f7d56a7a4671d395e8af87071068a195257bf6 ]
Commit
35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once)
added an internal flag MSG_SENDPAGE_NOTLAST, similar to
MSG_MORE.
algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages()
and need to see the new flag as identical to MSG_MORE.
This fixes sendfile() on AF_ALG.
v3: also fix udp
Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Original-patch: Richard Weinberger <richard@nod.at>
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Veaceslav Falico [Fri, 29 Nov 2013 08:53:23 +0000 (09:53 +0100)]
af_packet: block BH in prb_shutdown_retire_blk_timer()
[ Upstream commit
ec6f809ff6f19fafba3212f6aff0dda71dfac8e8 ]
Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(),
however the timer might fire right in the middle and thus try to re-aquire
the same spinlock, leaving us in a endless loop.
To fix that, use the spin_lock_bh() to block it.
Fixes:
f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
CC: "David S. Miller" <davem@davemloft.net>
CC: Daniel Borkmann <dborkman@redhat.com>
CC: Willem de Bruijn <willemb@google.com>
CC: Phil Sutter <phil@nwl.cc>
CC: Eric Dumazet <edumazet@google.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Thu, 21 Nov 2013 15:50:58 +0000 (16:50 +0100)]
packet: fix use after free race in send path when dev is released
[ Upstream commit
e40526cb20b5ee53419452e1f03d97092f144418 ]
Salam reported a use after free bug in PF_PACKET that occurs when
we're sending out frames on a socket bound device and suddenly the
net device is being unregistered. It appears that commit
827d9780
introduced a possible race condition between {t,}packet_snd() and
packet_notifier(). In the case of a bound socket, packet_notifier()
can drop the last reference to the net_device and {t,}packet_snd()
might end up suddenly sending a packet over a freed net_device.
To avoid reverting
827d9780 and thus introducing a performance
regression compared to the current state of things, we decided to
hold a cached RCU protected pointer to the net device and maintain
it on write side via bind spin_lock protected register_prot_hook()
and __unregister_prot_hook() calls.
In {t,}packet_snd() path, we access this pointer under rcu_read_lock
through packet_cached_dev_get() that holds reference to the device
to prevent it from being freed through packet_notifier() while
we're in send path. This is okay to do as dev_put()/dev_hold() are
per-cpu counters, so this should not be a performance issue. Also,
the code simplifies a bit as we don't need need_rls_dev anymore.
Fixes:
827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.")
Reported-by: Salam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Cc: Ben Greear <greearb@candelatech.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ding Tianhong [Sat, 7 Dec 2013 14:12:05 +0000 (22:12 +0800)]
bridge: flush br's address entry in fdb when remove the bridge dev
[ Upstream commit
f873042093c0b418d2351fe142222b625c740149 ]
When the following commands are executed:
brctl addbr br0
ifconfig br0 hw ether <addr>
rmmod bridge
The calltrace will occur:
[ 563.312114] device eth1 left promiscuous mode
[ 563.312188] br0: port 1(eth1) entered disabled state
[ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects
[ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O 3.12.0-0.7-default+ #9
[ 563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[ 563.468200]
0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8
[ 563.468204]
ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8
[ 563.468206]
ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78
[ 563.468209] Call Trace:
[ 563.468218] [<
ffffffff814d1c92>] dump_stack+0x6a/0x78
[ 563.468234] [<
ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100
[ 563.468242] [<
ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge]
[ 563.468247] [<
ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge]
[ 563.468254] [<
ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0
[ 563.468259] [<
ffffffff814e0922>] system_call_fastpath+0x16/0x1b
[ 570.377958] Bridge firewalling registered
--------------------------- cut here -------------------------------
The reason is that when the bridge dev's address is changed, the
br_fdb_change_mac_address() will add new address in fdb, but when
the bridge was removed, the address entry in the fdb did not free,
the bridge_fdb_cache still has objects when destroy the cache, Fix
this by flushing the bridge address entry when removing the bridge.
v2: according to the Toshiaki Makita and Vlad's suggestion, I only
delete the vlan0 entry, it still have a leak here if the vlan id
is other number, so I need to call fdb_delete_by_port(br, NULL, 1)
to flush all entries whose dst is NULL for the bridge.
Suggested-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlad Yasevich [Wed, 20 Nov 2013 01:47:15 +0000 (20:47 -0500)]
net: core: Always propagate flag changes to interfaces
[ Upstream commit
d2615bf450694c1302d86b9cc8a8958edfe4c3a4 ]
The following commit:
b6c40d68ff6498b7f63ddf97cf0aa818d748dee7
net: only invoke dev->change_rx_flags when device is UP
tried to fix a problem with VLAN devices and promiscuouse flag setting.
The issue was that VLAN device was setting a flag on an interface that
was down, thus resulting in bad promiscuity count.
This commit blocked flag propagation to any device that is currently
down.
A later commit:
deede2fabe24e00bd7e246eb81cd5767dc6fcfc7
vlan: Don't propagate flag changes on down interfaces
fixed VLAN code to only propagate flags when the VLAN interface is up,
thus fixing the same issue as above, only localized to VLAN.
The problem we have now is that if we have create a complex stack
involving multiple software devices like bridges, bonds, and vlans,
then it is possible that the flags would not propagate properly to
the physical devices. A simple examle of the scenario is the
following:
eth0----> bond0 ----> bridge0 ---> vlan50
If bond0 or eth0 happen to be down at the time bond0 is added to
the bridge, then eth0 will never have promisc mode set which is
currently required for operation as part of the bridge. As a
result, packets with vlan50 will be dropped by the interface.
The only 2 devices that implement the special flag handling are
VLAN and DSA and they both have required code to prevent incorrect
flag propagation. As a result we can remove the generic solution
introduced in
b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave
it to the individual devices to decide whether they will block
flag propagation or not.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Suggested-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ying Xue [Tue, 19 Nov 2013 10:09:27 +0000 (18:09 +0800)]
atm: idt77252: fix dev refcnt leak
[ Upstream commit
b5de4a22f157ca345cdb3575207bf46402414bc1 ]
init_card() calls dev_get_by_name() to get a network deceive. But it
doesn't decrease network device reference count after the device is
used.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Sat, 23 Nov 2013 06:22:33 +0000 (07:22 +0100)]
ipv6: fix leaking uninitialized port number of offender sockaddr
[ Upstream commit
1fa4c710b6fe7b0aac9907240291b6fe6aafc3b8 ]
Offenders don't have port numbers, so set it to 0.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 27 Nov 2013 12:40:21 +0000 (15:40 +0300)]
net: clamp ->msg_namelen instead of returning an error
[ Upstream commit
db31c55a6fb245fdbb752a2ca4aefec89afabb06 ]
If kmsg->msg_namelen > sizeof(struct sockaddr_storage) then in the
original code that would lead to memory corruption in the kernel if you
had audit configured. If you didn't have audit configured it was
harmless.
There are some programs such as beta versions of Ruby which use too
large of a buffer and returning an error code breaks them. We should
clamp the ->msg_namelen value instead.
Fixes:
1661bf364ae9 ("net: heap overflow in __audit_sockaddr()")
Reported-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Fri, 22 Nov 2013 23:46:12 +0000 (00:46 +0100)]
inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions
[ Upstream commit
85fbaa75037d0b6b786ff18658ddf0b4014ce2a4 ]
Commit
bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage
of uninitialized memory to user in recv syscalls") conditionally updated
addr_len if the msg_name is written to. The recv_error and rxpmtu
functions relied on the recvmsg functions to set up addr_len before.
As this does not happen any more we have to pass addr_len to those
functions as well and set it to the size of the corresponding sockaddr
length.
This broke traceroute and such.
Fixes:
bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
Reported-by: Brad Spengler <spender@grsecurity.net>
Reported-by: Tom Labanowski
Cc: mpb <mpb.mail@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Thu, 21 Nov 2013 02:14:34 +0000 (03:14 +0100)]
net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
[ Upstream commit
68c6beb373955da0886d8f4f5995b3922ceda4be ]
In that case it is probable that kernel code overwrote part of the
stack. So we should bail out loudly here.
The BUG_ON may be removed in future if we are sure all protocols are
conformant.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Thu, 21 Nov 2013 02:14:22 +0000 (03:14 +0100)]
net: rework recvmsg handler msg_name and msg_namelen logic
[ Upstream commit
f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ]
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.
This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.
Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.
Also document these changes in include/linux/net.h as suggested by David
Miller.
Changes since RFC:
Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.
With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
msg->msg_name = NULL
".
This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.
Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.
Cc: David Miller <davem@davemloft.net>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Mon, 18 Nov 2013 03:20:45 +0000 (04:20 +0100)]
inet: prevent leakage of uninitialized memory to user in recv syscalls
[ Upstream commit
bceaa90240b6019ed73b49965eac7d167610be69 ]
Only update *addr_len when we actually fill in sockaddr, otherwise we
can return uninitialized memory from the stack to the caller in the
recvfrom, recvmmsg and recvmsg syscalls. Drop the the (addr_len == NULL)
checks because we only get called with a valid addr_len pointer either
from sock_common_recvmsg or inet_recvmsg.
If a blocking read waits on a socket which is concurrently shut down we
now return zero and set msg_msgnamelen to 0.
Reported-by: mpb <mpb.mail@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 14 Nov 2013 21:37:54 +0000 (13:37 -0800)]
ipv4: fix possible seqlock deadlock
[ Upstream commit
c9e9042994d37cbc1ee538c500e9da1bb9d1bcdf ]
ip4_datagram_connect() being called from process context,
it should use IP_INC_STATS() instead of IP_INC_STATS_BH()
otherwise we can deadlock on 32bit arches, or get corruptions of
SNMP counters.
Fixes:
584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Metcalf [Thu, 14 Nov 2013 17:09:21 +0000 (12:09 -0500)]
connector: improved unaligned access error fix
[ Upstream commit
1ca1a4cf59ea343a1a70084fe7cc96f37f3cf5b1 ]
In
af3e095a1fb4, Erik Jacobsen fixed one type of unaligned access
bug for ia64 by converting a 64-bit write to use put_unaligned().
Unfortunately, since gcc will convert a short memset() to a series
of appropriately-aligned stores, the problem is now visible again
on tilegx, where the memset that zeros out proc_event is converted
to three 64-bit stores, causing an unaligned access panic.
A better fix for the original problem is to ensure that proc_event
is aligned to 8 bytes here. We can do that relatively easily by
arranging to start the struct cn_msg aligned to 8 bytes and then
offset by 4 bytes. Doing so means that the immediately following
proc_event structure is then correctly aligned to 8 bytes.
The result is that the memset() stores are now aligned, and as an
added benefit, we can remove the put_unaligned() calls in the code.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 14 Nov 2013 08:21:10 +0000 (11:21 +0300)]
isdnloop: use strlcpy() instead of strcpy()
[ Upstream commit
f9a23c84486ed350cce7bb1b2828abd1f6658796 ]
These strings come from a copy_from_user() and there is no way to be
sure they are NUL terminated.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Wed, 13 Nov 2013 16:07:46 +0000 (17:07 +0100)]
bonding: fix two race conditions in bond_store_updelay/downdelay
[ Upstream commit
b869ccfab1e324507fa3596e3e1308444fb68227 ]
This patch fixes two race conditions between bond_store_updelay/downdelay
and bond_store_miimon which could lead to division by zero as miimon can
be set to 0 while either updelay/downdelay are being set and thus miss the
zero check in the beginning, the zero div happens because updelay/downdelay
are stored as new_value / bond->params.miimon. Use rtnl to synchronize with
miimon setting.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jukka Rissanen [Wed, 13 Nov 2013 09:03:39 +0000 (11:03 +0200)]
6lowpan: Uncompression of traffic class field was incorrect
[ Upstream commit
1188f05497e7bd2f2614b99c54adfbe7413d5749 ]
If priority/traffic class field in IPv6 header is set (seen when
using ssh), the uncompression sets the TC and Flow fields incorrectly.
Example:
This is IPv6 header of a sent packet. Note the priority/TC (=1) in
the first byte.
00000000: 61 00 00 00 00 2c 06 40 fe 80 00 00 00 00 00 00
00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
00000020: 02 1e ab ff fe 4c 52 57
This gets compressed like this in the sending side
00000000: 72 31 04 06 02 1e ab ff fe 4c 52 57 ec c2 00 16
00000010: aa 2d fe 92 86 4e be c6 ....
In the receiving end, the packet gets uncompressed to this
IPv6 header
00000000: 60 06 06 02 00 2a 1e 40 fe 80 00 00 00 00 00 00
00000010: 02 02 72 ff fe c6 42 10 fe 80 00 00 00 00 00 00
00000020: ab ff fe 4c 52 57 ec c2
First four bytes are set incorrectly and we have also lost
two bytes from destination address.
The fix is to switch the case values in switch statement
when checking the TC field.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Veaceslav Falico [Tue, 12 Nov 2013 14:37:40 +0000 (15:37 +0100)]
bonding: don't permit to use ARP monitoring in 802.3ad mode
[ Upstream commit
ec9f1d15db8185f63a2c3143dc1e90ba18541b08 ]
Currently the ARP monitoring is not supported with 802.3ad, and it's
prohibited to use it via the module params.
However we still can set it afterwards via sysfs, cause we only check for
*LB modes there.
To fix this - add a check for 802.3ad mode in bonding_store_arp_interval.
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Mon, 11 Nov 2013 11:20:32 +0000 (12:20 +0100)]
random32: fix off-by-one in seeding requirement
[ Upstream commit
51c37a70aaa3f95773af560e6db3073520513912 ]
For properly initialising the Tausworthe generator [1], we have
a strict seeding requirement, that is, s1 > 1, s2 > 7, s3 > 15.
Commit
697f8d0348 ("random32: seeding improvement") introduced
a __seed() function that imposes boundary checks proposed by the
errata paper [2] to properly ensure above conditions.
However, we're off by one, as the function is implemented as:
"return (x < m) ? x + m : x;", and called with __seed(X, 1),
__seed(X, 7), __seed(X, 15). Thus, an unwanted seed of 1, 7, 15
would be possible, whereas the lower boundary should actually
be of at least 2, 8, 16, just as GSL does. Fix this, as otherwise
an initialization with an unwanted seed could have the effect
that Tausworthe's PRNG properties cannot not be ensured.
Note that this PRNG is *not* used for cryptography in the kernel.
[1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps
[2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps
Joint work with Hannes Frederic Sowa.
Fixes:
697f8d0348a6 ("random32: seeding improvement")
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Duan Jiong [Fri, 8 Nov 2013 01:56:53 +0000 (09:56 +0800)]
ipv6: use rt6_get_dflt_router to get default router in rt6_route_rcv
[ Upstream commit
f104a567e673f382b09542a8dc3500aa689957b4 ]
As the rfc 4191 said, the Router Preference and Lifetime values in a
::/0 Route Information Option should override the preference and lifetime
values in the Router Advertisement header. But when the kernel deals with
a ::/0 Route Information Option, the rt6_get_route_info() always return
NULL, that means that overriding will not happen, because those default
routers were added without flag RTF_ROUTEINFO in rt6_add_dflt_router().
In order to deal with that condition, we should call rt6_get_dflt_router
when the prefix length is 0.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Henriksson [Thu, 7 Nov 2013 17:26:38 +0000 (18:26 +0100)]
net: Fix "ip rule delete table 256"
[ Upstream commit
13eb2ab2d33c57ebddc57437a7d341995fc9138c ]
When trying to delete a table >= 256 using iproute2 the local table
will be deleted.
The table id is specified as a netlink attribute when it needs more then
8 bits and iproute2 then sets the table field to RT_TABLE_UNSPEC (0).
Preconditions to matching the table id in the rule delete code
doesn't seem to take the "table id in netlink attribute" into condition
so the frh_get_table helper function never gets to do its job when
matching against current rule.
Use the helper function twice instead of peaking at the table value directly.
Originally reported at: http://bugs.debian.org/724783
Reported-by: Nicolas HICHER <nhicher@avencall.com>
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 4 Dec 2013 18:50:53 +0000 (10:50 -0800)]
Linux 3.4.72
Nanno Langstraat [Mon, 14 Oct 2013 14:07:15 +0000 (16:07 +0200)]
HID: apple: option to swap the 'Option' ("Alt") and 'Command' ("Flag") keys.
commit
43c831468b3d26dbe8f2e061ccaf1abaf9cc1b8b upstream.
Use case: people who use both Apple and PC keyboards regularly, and desire to
keep&use their PC muscle memory.
A particular use case: an Apple compact external keyboard connected to a PC
laptop. (This use case can't be covered well by X.org key remappings etc.)
Signed-off-by: Nanno Langstraat <langstr@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Achatz [Sun, 3 Nov 2013 05:25:33 +0000 (06:25 +0100)]
HID: roccat: fix Coverity CID 141438
commit
7be63f20b00840a6f1c718dcee00855688d64acd upstream.
Add missing switch breaks.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Sat, 2 Nov 2013 11:16:47 +0000 (08:16 -0300)]
media: lirc_zilog: Don't use dynamic static allocation
commit
ac5b4b6bf0c84c48d7e2e3fce22e35b04282ba76 upstream.
Dynamic static allocation is evil, as Kernel stack is too low, and
ompilation complains about it on some archs:
drivers/staging/media/lirc/lirc_zilog.c:967:1: warning: 'read' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be 64. That should
be more than enough.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Red Hat) [Tue, 26 Nov 2013 01:59:46 +0000 (20:59 -0500)]
ftrace: Fix function graph with loading of modules
commit
8a56d7761d2d041ae5e8215d20b4167d8aa93f51 upstream.
Commit
8c4f3c3fa9681 "ftrace: Check module functions being traced on reload"
fixed module loading and unloading with respect to function tracing, but
it missed the function graph tracer. If you perform the following
# cd /sys/kernel/debug/tracing
# echo function_graph > current_tracer
# modprobe nfsd
# echo nop > current_tracer
You'll get the following oops message:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9()
Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt
CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000
0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668
ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000
Call Trace:
[<
ffffffff814fe193>] dump_stack+0x4f/0x7c
[<
ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b
[<
ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<
ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c
[<
ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<
ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364
[<
ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b
[<
ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78
[<
ffffffff810c4b30>] graph_trace_reset+0xe/0x10
[<
ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a
[<
ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd
[<
ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde
[<
ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e
[<
ffffffff81122aed>] vfs_write+0xab/0xf6
[<
ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<
ffffffff81122dbd>] SyS_write+0x59/0x82
[<
ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<
ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b
---[ end trace
940358030751eafb ]---
The above mentioned commit didn't go far enough. Well, it covered the
function tracer by adding checks in __register_ftrace_function(). The
problem is that the function graph tracer circumvents that (for a slight
efficiency gain when function graph trace is running with a function
tracer. The gain was not worth this).
The problem came with ftrace_startup() which should always be called after
__register_ftrace_function(), if you want this bug to be completely fixed.
Anyway, this solution moves __register_ftrace_function() inside of
ftrace_startup() and removes the need to call them both.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Fixes:
ed926f9b35cd ("ftrace: Use counters to enable functions to trace")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Mon, 10 Dec 2012 17:32:57 +0000 (10:32 -0700)]
KVM: Fix iommu map/unmap to handle memory slot moves
commit
e40f193f5bb022e927a57a4f5d5194e4f12ddb74 upstream.
The iommu integration into memory slots expects memory slots to be
added or removed and doesn't handle the move case. We can unmap
slots from the iommu after we mark them invalid and map them before
installing the final memslot array. Also re-order the kmemdup vs
map so we don't leave iommu mappings if we get ENOMEM.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcelo Tosatti [Fri, 24 Aug 2012 18:54:58 +0000 (15:54 -0300)]
KVM: perform an invalid memslot step for gpa base change
commit
12d6e7538e2d418c08f082b1b44ffa5fb7270ed8 upstream.
PPC must flush all translations before the new memory slot
is visible.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Gundersen [Thu, 31 Oct 2013 07:33:54 +0000 (00:33 -0700)]
Input: i8042 - add PNP modaliases
commit
78551277e4df57864b0b0e7f85c23ede2be2edb8 upstream.
This allows the module to be autoloaded in the common case.
In order to work on non-PnP systems the module should be compiled in or
loaded unconditionally at boot (c.f. modules-load.d(5)), as before.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Red Hat) [Tue, 26 Nov 2013 14:22:54 +0000 (09:22 -0500)]
tracing: Allow events to have NULL strings
commit
4e58e54754dc1fec21c3a9e824bc108b05fdf46e upstream.
If an TRACE_EVENT() uses __assign_str() or __get_str on a NULL pointer
then the following oops will happen:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
c127a17b>] strlen+0x10/0x1a
*pde =
00000000 ^M
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc1-test+ #2
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006^M
task:
f5cde9f0 ti:
f5e5e000 task.ti:
f5e5e000
EIP: 0060:[<
c127a17b>] EFLAGS:
00210046 CPU: 1
EIP is at strlen+0x10/0x1a
EAX:
00000000 EBX:
c2472da8 ECX:
ffffffff EDX:
c2472da8
ESI:
c1c5e5fc EDI:
00000000 EBP:
f5e5fe84 ESP:
f5e5fe80
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0:
8005003b CR2:
00000000 CR3:
01f32000 CR4:
000007d0
Stack:
f5f18b90 f5e5feb8 c10687a8 0759004f 00000005 00000005 00000005 00200046
00000002 00000000 c1082a93 f56c7e28 c2472da8 c1082a93 f5e5fee4 c106bc61^M
00000000 c1082a93 00000000 00000000 00000001 00200046 00200082 00000000
Call Trace:
[<
c10687a8>] ftrace_raw_event_lock+0x39/0xc0
[<
c1082a93>] ? ktime_get+0x29/0x69
[<
c1082a93>] ? ktime_get+0x29/0x69
[<
c106bc61>] lock_release+0x57/0x1a5
[<
c1082a93>] ? ktime_get+0x29/0x69
[<
c10824dd>] read_seqcount_begin.constprop.7+0x4d/0x75
[<
c1082a93>] ? ktime_get+0x29/0x69^M
[<
c1082a93>] ktime_get+0x29/0x69
[<
c108a46a>] __tick_nohz_idle_enter+0x1e/0x426
[<
c10690e8>] ? lock_release_holdtime.part.19+0x48/0x4d
[<
c10bc184>] ? time_hardirqs_off+0xe/0x28
[<
c1068c82>] ? trace_hardirqs_off_caller+0x3f/0xaf
[<
c108a8cb>] tick_nohz_idle_enter+0x59/0x62
[<
c1079242>] cpu_startup_entry+0x64/0x192
[<
c102299c>] start_secondary+0x277/0x27c
Code: 90 89 c6 89 d0 88 c4 ac 38 e0 74 09 84 c0 75 f7 be 01 00 00 00 89 f0 48 5e 5d c3 55 89 e5 57 66 66 66 66 90 83 c9 ff 89 c7 31 c0 <f2> ae f7 d1 8d 41 ff 5f 5d c3 55 89 e5 57 66 66 66 66 90 31 ff
EIP: [<
c127a17b>] strlen+0x10/0x1a SS:ESP 0068:
f5e5fe80
CR2:
0000000000000000
---[ end trace
01bc47bf519ec1b2 ]---
New tracepoints have been added that have allowed for NULL pointers
being assigned to strings. To fix this, change the TRACE_EVENT() code
to check for NULL and if it is, it will assign "(null)" to it instead
(similar to what glibc printf does).
Reported-by: Shuah Khan <shuah.kh@samsung.com>
Reported-by: Jovi Zhangwei <jovi.zhangwei@gmail.com>
Link: http://lkml.kernel.org/r/CAGdX0WFeEuy+DtpsJzyzn0343qEEjLX97+o1VREFkUEhndC+5Q@mail.gmail.com
Link: http://lkml.kernel.org/r/528D6972.9010702@samsung.com
Fixes:
9cbf117662e2 ("tracing/events: provide string with undefined size support")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Tue, 26 Nov 2013 07:41:40 +0000 (15:41 +0800)]
ALSA: hda/realtek - Set pcbeep amp for ALC668
commit
9ad54547cf6f4410eba83bb95dfd2a0966718d6d upstream.
Set the missing pcbeep default amp for ALC668.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Tue, 26 Nov 2013 14:03:41 +0000 (15:03 +0100)]
cpuset: Fix memory allocator deadlock
commit
0fc0287c9ed1ffd3706f8b4d9b314aa102ef1245 upstream.
Juri hit the below lockdep report:
[ 4.303391] ======================================================
[ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted
[ 4.303395] ------------------------------------------------------
[ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<
ffffffff8114e63c>] new_slab+0x6c/0x290
[ 4.303417]
[ 4.303417] and this task is already holding:
[ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<
ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100
[ 4.303431] which would create a new lock dependency:
[ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...}
[ 4.303436]
[ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 {
[ 4.303922] HARDIRQ-ON-W at:
[ 4.303923] [<
ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0
[ 4.303926] [<
ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303929] [<
ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303931] [<
ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303933] SOFTIRQ-ON-W at:
[ 4.303933] [<
ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0
[ 4.303935] [<
ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303940] [<
ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303955] [<
ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303959] INITIAL USE at:
[ 4.303960] [<
ffffffff8108a884>] __lock_acquire+0x344/0x1ff0
[ 4.303963] [<
ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303966] [<
ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303969] [<
ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303972] }
Which reports that we take mems_allowed_seq with interrupts enabled. A
little digging found that this can only be from
cpuset_change_task_nodemask().
This is an actual deadlock because an interrupt doing an allocation will
hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin
forever waiting for the write side to complete.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Reported-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Neuling [Mon, 25 Nov 2013 00:12:20 +0000 (11:12 +1100)]
powerpc/signals: Improved mark VSX not saved with small contexts fix
commit
ec67ad82814bee92251fd963bf01c7a173856555 upstream.
In a recent patch:
commit
c13f20ac48328b05cd3b8c19e31ed6c132b44b42
Author: Michael Neuling <mikey@neuling.org>
powerpc/signals: Mark VSX not saved with small contexts
We fixed an issue but an improved solution was later discussed after the patch
was merged.
Firstly, this patch doesn't handle the 64bit signals case, which could also hit
this issue (but has never been reported).
Secondly, the original patch isn't clear what MSR VSX should be set to. The
new approach below always clears the MSR VSX bit (to indicate no VSX is in the
context) and sets it only in the specific case where VSX is available (ie. when
VSX has been used and the signal context passed has space to provide the
state).
This reverts the original patch and replaces it with the improved solution. It
also adds a 64 bit version.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Thu, 14 Nov 2013 04:16:15 +0000 (15:16 +1100)]
md: fix calculation of stacking limits on level change.
commit
02e5f5c0a0f726e66e3d8506ea1691e344277969 upstream.
The various ->run routines of md personalities assume that the 'queue'
has been initialised by the blk_set_stacking_limits() call in
md_alloc().
However when the level is changed (by level_store()) the ->run routine
for the new level is called for an array which has already had the
stacking limits modified. This can result in incorrect final
settings.
So call blk_set_stacking_limits() before ->run in level_store().
A specific consequence of this bug is that it causes
discard_granularity to be set incorrectly when reshaping a RAID4 to a
RAID0.
This is suitable for any -stable kernel since 3.3 in which
blk_set_stacking_limits() was introduced.
Reported-and-tested-by: "Baldysiak, Pawel" <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jerome Glisse [Tue, 12 Nov 2013 15:51:16 +0000 (10:51 -0500)]
radeon: workaround pinning failure on low ram gpu
commit
97b6ff6be9da7675aab339334fda996d6c5077d9 upstream.
GPU with low amount of ram can fails at pinning new framebuffer before
unpinning old one. On such failure, retry with unpinning old one before
pinning new one allowing to work around the issue. This is somewhat
ugly but only affect those old GPU we care about.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Mon, 28 Oct 2013 14:56:23 +0000 (10:56 -0400)]
drm/radeon/si: fix define for MC_SEQ_TRAIN_WAKEUP_CNTL
commit
d5693761b2b4ff530c8af8af9ec55b6eae76e617 upstream.
Typo in the register offset.
Noticed-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Skeggs [Wed, 13 Nov 2013 05:18:32 +0000 (15:18 +1000)]
drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence
commit
9360bd1112d8874d21942e2ae74f5416b00a8db6 upstream.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Mon, 4 Nov 2013 07:13:45 +0000 (08:13 +0100)]
drm/i915: flush cursors harder
commit
b2ea8ef559b4d94190009f3651b5b3ab7c05afd3 upstream.
Apparently they need the same treatment as primary planes. This fixes
modesetting failures because of stuck cursors (!) on Thomas' i830M
machine.
I've figured while at it I'll also roll it out for the ivb 3 pipe
version of this function. I didn't do this for i845/i865 since Bspec
says the update mechanism works differently, and there's some
additional rules about what can be updated in which order.
Tested-by: Thomas Richter <thor@math.tu-berlin.de>
Cc: Thomas Richter <thor@math.tu-berlin.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakob Bornecrantz [Wed, 30 Oct 2013 09:46:56 +0000 (02:46 -0700)]
drm/ttm: Handle in-memory region copies
commit
9a0599ddeae012a771bba5e23393fc52d8a59d89 upstream.
Fix the case where the ttm pointer may be NULL causing
a NULL pointer dereference.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Fri, 8 Nov 2013 19:39:44 +0000 (13:39 -0600)]
prism54: set netdev type to "wlan"
commit
8e3ffa471091c560deb6738ed9ab7445b7a5fd04 upstream.
Userspace uses the netdev devtype for stuff like device naming and type
detection. Be nice and set it. Remove the pointless #if/#endif around
SET_NETDEV_DEV too.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Bießmann [Thu, 24 Oct 2013 10:31:04 +0000 (12:31 +0200)]
avr32: fix out-of-range jump in large kernels
commit
d617b338bbfdd77e9cbd8e7dc949cee3dd73d575 upstream.
This patch fixes following error (for big kernels):
---8<---
arch/avr32/boot/u-boot/head.o: In function `no_tag_table':
(.init.text+0x44): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
arch/avr32/kernel/built-in.o: In function `bad_return':
(.ex.text+0x236): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
--->8---
It comes up when the kernel increases and 'panic()' is too far away to fit in
the +/- 2MiB range. Which in turn issues from the 21-bit displacement in
'br{cond4}' mnemonic which is one of the two ways to do jumps (rjmp has just
10-bit displacement and therefore a way smaller range). This fact was stated
before in
8d29b7b9f81d6b83d869ff054e6c189d6da73f1f.
One solution to solve this is to add a local storage for the symbol address
and just load the $pc with that value.
Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Bießmann [Thu, 24 Oct 2013 10:31:03 +0000 (12:31 +0200)]
avr32: setup crt for early panic()
commit
7a2a74f4b856993218aa7cdeeb6c3103101340db upstream.
Before the CRT was (fully) set up in kernel_entry (bss cleared before in
_start, but also not before jump to panic() in no_tag_table case).
This patch fixes this up to have a fully working CRT when branching to panic()
in no_tag_table.
Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Moore [Thu, 26 Sep 2013 21:00:46 +0000 (17:00 -0400)]
selinux: correct locking in selinux_netlbl_socket_connect)
commit
42d64e1add3a1ce8a787116036163b8724362145 upstream.
The SELinux/NetLabel glue code has a locking bug that affects systems
with NetLabel enabled, see the kernel error message below. This patch
corrects this problem by converting the bottom half socket lock to a
more conventional, and correct for this call-path, lock_sock() call.
===============================
[ INFO: suspicious RCU usage. ]
3.11.0-rc3+ #19 Not tainted
-------------------------------
net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
2 locks held by ping/731:
#0: (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect
#1: (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr
stack backtrace:
CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ #19
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500
ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000
000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7
Call Trace:
[<
ffffffff81726b6a>] dump_stack+0x54/0x74
[<
ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120
[<
ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0
[<
ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190
[<
ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190
[<
ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0
[<
ffffffff81303025>] selinux_socket_connect+0x135/0x170
[<
ffffffff8119d127>] ? might_fault+0x57/0xb0
[<
ffffffff812fb146>] security_socket_connect+0x16/0x20
[<
ffffffff815d3ad3>] SYSC_connect+0x73/0x130
[<
ffffffff81739a85>] ? sysret_check+0x22/0x5d
[<
ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[<
ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<
ffffffff815d52be>] SyS_connect+0xe/0x10
[<
ffffffff81739a59>] system_call_fastpath+0x16/0x1b
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yinghai Lu [Tue, 19 Nov 2013 00:02:45 +0000 (17:02 -0700)]
PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()
commit
e7cc5cf74544d97d7b69e2701595037474db1f96 upstream.
The pcie_portdrv .probe() method calls pci_enable_device() once, in
pcie_port_device_register(), but the .remove() method calls
pci_disable_device() twice, in pcie_port_device_remove() and in
pcie_portdrv_remove().
That causes a "disabling already-disabled device" warning when removing a
PCIe port device. This happens all the time when removing Thunderbolt
devices, but is also easy to reproduce with, e.g.,
"echo 0000:00:1c.3 > /sys/bus/pci/drivers/pcieport/unbind"
This patch removes the disable from pcie_portdrv_remove().
[bhelgaas: changelog, tag for stable]
Reported-by: David Bulkow <David.Bulkow@stratus.com>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Krause [Mon, 30 Sep 2013 20:04:24 +0000 (22:04 +0200)]
audit: fix info leak in AUDIT_GET requests
commit
64fbff9ae0a0a843365d922e0057fc785f23f0e3 upstream.
We leak 4 bytes of kernel stack in response to an AUDIT_GET request as
we miss to initialize the mask member of status_set. Fix that.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Krause [Mon, 30 Sep 2013 20:04:25 +0000 (22:04 +0200)]
audit: use nlmsg_len() to get message payload length
commit
4d8fe7376a12bf4524783dd95cbc00f1fece6232 upstream.
Using the nlmsg_len member of the netlink header to test if the message
is valid is wrong as it includes the size of the netlink header itself.
Thereby allowing to send short netlink messages that pass those checks.
Use nlmsg_len() instead to test for the right message length. The result
of nlmsg_len() is guaranteed to be non-negative as the netlink message
already passed the checks of nlmsg_ok().
Also switch to min_t() to please checkpatch.pl.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tyler Hicks [Fri, 26 Jul 2013 01:02:55 +0000 (18:02 -0700)]
audit: printk USER_AVC messages when audit isn't enabled
commit
0868a5e150bc4c47e7a003367cd755811eb41e0b upstream.
When the audit=1 kernel parameter is absent and auditd is not running,
AUDIT_USER_AVC messages are being silently discarded.
AUDIT_USER_AVC messages should be sent to userspace using printk(), as
mentioned in the commit message of
4a4cd633 ("AUDIT: Optimise the
audit-disabled case for discarding user messages").
When audit_enabled is 0, audit_receive_msg() discards all user messages
except for AUDIT_USER_AVC messages. However, audit_log_common_recv_msg()
refuses to allocate an audit_buffer if audit_enabled is 0. The fix is to
special case AUDIT_USER_AVC messages in both functions.
It looks like commit
50397bd1 ("[AUDIT] clean up audit_receive_msg()")
introduced this bug.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avinash Patil [Tue, 5 Nov 2013 23:01:44 +0000 (15:01 -0800)]
mwifiex: correct packet length for packets from SDIO interface
commit
d03b4aa77e1187b77dfe37d14a923547f00baa66 upstream.
While receiving a packet on SDIO interface, we allocate skb with
size multiple of SDIO block size. We need to resize this skb
after RX using packet length from RX header.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Lu [Wed, 6 Nov 2013 00:41:31 +0000 (08:41 +0800)]
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
commit
fd432b9f8c7c88428a4635b9f5a9c6e174df6e36 upstream.
When system has a lot of highmem (e.g. 16GiB using a 32 bits kernel),
the code to calculate how much memory we need to preallocate in
normal zone may cause overflow. As Leon has analysed:
It looks that during computing 'alloc' variable there is overflow:
alloc = (3943404 - 1970542) - 1978280 = -5418 (signed)
And this function goes to err_out.
Fix this by avoiding that overflow.
References: https://bugzilla.kernel.org/show_bug.cgi?id=60817
Reported-and-tested-by: Leon Drugi <eyak@wp.pl>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Thu, 31 Oct 2013 17:55:45 +0000 (13:55 -0400)]
dm: allocate buffer for messages with small number of arguments using GFP_NOIO
commit
f36afb3957353d2529cb2b00f78fdccd14fc5e9c upstream.
dm-mpath and dm-thin must process messages even if some device is
suspended, so we allocate argv buffer with GFP_NOIO. These messages have
a small fixed number of arguments.
On the other hand, dm-switch needs to process bulk data using messages
so excessive use of GFP_NOIO could cause trouble.
The patch also lowers the default number of arguments from 64 to 8, so
that there is smaller load on GFP_NOIO allocations.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanislaw Gruszka [Tue, 15 Oct 2013 12:28:48 +0000 (14:28 +0200)]
rt2400pci: fix RSSI read
commit
2bf127a5cc372b9319afcbae10b090663b621c8b upstream.
RSSI value is provided on word3 not on word2.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ursula Braun [Wed, 6 Nov 2013 08:04:52 +0000 (09:04 +0100)]
qeth: avoid buffer overflow in snmp ioctl
commit
6fb392b1a63ae36c31f62bc3fc8630b49d602b62 upstream.
Check user-defined length in snmp ioctl request and allow request
only if it fits into a qeth command buffer.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Tue, 5 Nov 2013 21:15:29 +0000 (15:15 -0600)]
rtlwifi: rtl8192cu: Fix incorrect signal strength for unassociated AP
commit
78dbfecb95be4635b995af3bd29fa10013409fcd upstream.
The routine that processes received frames was returning the RSSI value for the
signal strength; however, that value is available only for associated APs. As
a result, the strength was the absurd value of 10 dBm. As a result, scans
return incorrect values for the strength, which causes unwanted attempts to roam.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Tue, 5 Nov 2013 21:15:28 +0000 (15:15 -0600)]
rtlwifi: rtl8192se: Fix incorrect signal strength for unassociated AP
commit
b4ade797668e33b4e8353c2701ce01d7084dfafa upstream.
The routine that processes received frames was returning the RSSI value for the
signal strength; however, that value is available only for associated APs. As
a result, the strength was the absurd value of 10 dBm. As a result, scans
return incorrect values for the strength, which causes unwanted attempts to roam.
This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=63881.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Matthieu Baerts <matttbe@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Tue, 5 Nov 2013 21:15:30 +0000 (15:15 -0600)]
rtlwifi: rtl8192de: Fix incorrect signal strength for unassociated AP
commit
3545f3d5f4af715c914394123ce7725a9cf0a1c4 upstream.
The routine that processes received frames was returning the RSSI value for the
signal strength; however, that value is available only for associated APs. As
a result, the strength was the absurd value of 10 dBm. As a result, scans
return incorrect values for the strength, which causes unwanted attempts to roam.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 7 Nov 2013 21:49:04 +0000 (21:49 +0000)]
staging: vt6656: [BUG] Fix for TX USB resets from vendors driver.
commit
9df682927c2e3a92f43803d6b52095992e3b2ab8 upstream.
This fixes resets on heavy TX data traffic.
Vendor driver
VT6656_Linux_src_v1.21.03_x86_11.04.zip
http://www.viaembedded.com/servlet/downloadSvl?id=1890&download_file_id=14704
This is GPL-licensed code.
original code
BBbVT3184Init
...
//2007-0725, RobertChang add, Enable Squelch detect reset option(SQ_RST_Opt), USB (register4, bit1)
CONTROLnsRequestIn(pDevice,
MESSAGE_TYPE_READ,
(WORD)0x600+4, // USB's Reg4's bit1
MESSAGE_REQUEST_MEM,
1,
(PBYTE) &byData);
byData = byData|2 ;
CONTROLnsRequestOut(pDevice,
MESSAGE_TYPE_WRITE,
(WORD)0x600+4, // USB's Reg4's bit1
MESSAGE_REQUEST_MEM,
1,
(PBYTE) &byData);
return TRUE;//ntStatus;
....
A back port patch is needed for kernels less than 3.10.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vegard Nossum [Thu, 5 Sep 2013 11:00:14 +0000 (13:00 +0200)]
xen/blkback: fix reference counting
commit
ea5ec76d76da9279d12027c1828544c5ccbe7932 upstream.
If the permission check fails, we drop a reference to the blkif without
having taken it in the first place. The bug was introduced in commit
604c499cbbcc3d5fe5fb8d53306aa0fae1990109 (xen/blkback: Check device
permissions before allowing OP_DISCARD).
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Fri, 1 Nov 2013 03:00:24 +0000 (23:00 -0400)]
ext4: avoid bh leak in retry path of ext4_expand_extra_isize_ea()
commit
dcb9917ba041866686fe152850364826c4622a36 upstream.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huang Shijie [Mon, 11 Nov 2013 04:13:45 +0000 (12:13 +0800)]
mtd: gpmi: fix kernel BUG due to racing DMA operations
commit
7b3d2fb92067bcb29f0f085a9fa9fa64920a6646 upstream.
[1] The gpmi uses the nand_command_lp to issue the commands to NAND chips.
The gpmi issues a DMA operation with gpmi_cmd_ctrl when it handles
a NAND_CMD_NONE control command. So when we read a page(NAND_CMD_READ0)
from the NAND, we may send two DMA operations back-to-back.
If we do not serialize the two DMA operations, we will meet a bug when
1.1) we enable CONFIG_DMA_API_DEBUG, CONFIG_DMADEVICES_DEBUG,
and CONFIG_DEBUG_SG.
1.2) Use the following commands in an UART console and a SSH console:
cmd 1: while true;do dd if=/dev/mtd0 of=/dev/null;done
cmd 1: while true;do dd if=/dev/mmcblk0 of=/dev/null;done
The kernel log shows below:
-----------------------------------------------------------------
kernel BUG at lib/scatterlist.c:28!
Unable to handle kernel NULL pointer dereference at virtual address
00000000
.........................
[<
80044a0c>] (__bug+0x18/0x24) from [<
80249b74>] (sg_next+0x48/0x4c)
[<
80249b74>] (sg_next+0x48/0x4c) from [<
80255398>] (debug_dma_unmap_sg+0x170/0x1a4)
[<
80255398>] (debug_dma_unmap_sg+0x170/0x1a4) from [<
8004af58>] (dma_unmap_sg+0x14/0x6c)
[<
8004af58>] (dma_unmap_sg+0x14/0x6c) from [<
8027e594>] (mxs_dma_tasklet+0x18/0x1c)
[<
8027e594>] (mxs_dma_tasklet+0x18/0x1c) from [<
8007d444>] (tasklet_action+0x114/0x164)
-----------------------------------------------------------------
1.3) Assume the two DMA operations is X (first) and Y (second).
The root cause of the bug:
Assume process P issues DMA X, and sleep on the completion
@this->dma_done. X's tasklet callback is dma_irq_callback. It firstly
wake up the process sleeping on the completion @this->dma_done,
and then trid to unmap the scatterlist S. The waked process P will
issue Y in another ARM core. Y initializes S->sg_magic to zero
with sg_init_one(), while dma_irq_callback is unmapping S at the same
time.
See the diagram:
ARM core 0 | ARM core 1
-------------------------------------------------------------
(P issues DMA X, then sleep) --> |
|
(X's tasklet wakes P) --> |
|
| <-- (P begin to issue DMA Y)
|
(X's tasklet unmap the |
scatterlist S with dma_unmap_sg) --> | <-- (Y calls sg_init_one() to init
| scatterlist S)
|
[2] This patch serialize both the X and Y in the following way:
Unmap the DMA scatterlist S firstly, and wake up the process at the end
of the DMA callback, in such a way, Y will be executed after X.
After this patch:
ARM core 0 | ARM core 1
-------------------------------------------------------------
(P issues DMA X, then sleep) --> |
|
(X's tasklet unmap the |
scatterlist S with dma_unmap_sg) --> |
|
(X's tasklet wakes P) --> |
|
| <-- (P begin to issue DMA Y)
|
| <-- (Y calls sg_init_one() to init
| scatterlist S)
|
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Haitao [Thu, 22 Aug 2013 11:32:38 +0000 (19:32 +0800)]
mtd: map: fixed bug in 64-bit systems
commit
a4d62babf988fe5dfde24437fa135ef147bc7aa0 upstream.
Hardware:
CPU: XLP832,the 64-bit OS
NOR Flash:S29GL128S 128M
Software:
Kernel:2.6.32.41
Filesystem:JFFS2
When writing files, errors appear:
Write len 182 but return retlen 180
Write of 182 bytes at 0x072c815c failed. returned -5, retlen 180
Write len 186 but return retlen 184
Write of 186 bytes at 0x072caff4 failed. returned -5, retlen 184
These errors exist only in 64-bit systems,not in 32-bit systems. After analysis, we
found that the left shift operation is wrong in map_word_load_partial. For instance:
unsigned char buf[3] ={0x9e,0x3a,0xea};
map_bankwidth(map) is 4;
for (i=0; i < 3; i++) {
int bitpos;
bitpos = (map_bankwidth(map)-1-i)*8;
orig.x[0] &= ~(0xff << bitpos);
orig.x[0] |= buf[i] << bitpos;
}
The value of orig.x[0] is expected to be 0x9e3aeaff, but in this situation(64-bit
System) we'll get the wrong value of 0xffffffff9e3aeaff due to the 64-bit sign
extension:
buf[i] is defined as "unsigned char" and the left-shift operation will convert it
to the type of "signed int", so when left-shift buf[i] by 24 bits, the final result
will get the wrong value: 0xffffffff9e3aeaff.
If the left-shift bits are less than 24, then sign extension will not occur. Whereas
the bankwidth of the nor flash we used is 4, therefore this BUG emerges.
Signed-off-by: Pang Xunlei <pang.xunlei@zte.com.cn>
Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Signed-off-by: Lu Zhongjun <lu.zhongjun@zte.com.cn>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Wed, 28 Aug 2013 01:45:10 +0000 (18:45 -0700)]
mtd: nand: hack ONFI for non-power-of-2 dimensions
commit
4355b70cf48363c50a9de450b01178c83aba8f6a upstream.
Some bright specification writers decided to write this in the ONFI spec
(from ONFI 3.0, Section 3.1):
"The number of blocks and number of pages per block is not required to
be a power of two. In the case where one of these values is not a
power of two, the corresponding address shall be rounded to an
integral number of bits such that it addresses a range up to the
subsequent power of two value. The host shall not access upper
addresses in a range that is shown as not supported."
This breaks every assumption MTD makes about NAND block/chip-size
dimensions -- they *must* be a power of two!
And of course, an enterprising manufacturer has made use of this lovely
freedom. Exhibit A: Micron MT29F32G08CBADAWP
"- Plane size: 2 planes x 1064 blocks per plane
- Device size: 32Gb: 2128 blockss [sic]"
This quickly hits a BUG() in nand_base.c, since the extra dimensions
overflow so we think it's a second chip (on my single-chip setup):
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x44 (Micron MT29F32G08CBADAWP), 4256MiB, page size: 8192, OOB size: 744
------------[ cut here ]------------
kernel BUG at drivers/mtd/nand/nand_base.c:203!
Internal error: Oops - BUG: 0 [#1] SMP ARM
[... trim ...]
[<
c02cf3e4>] (nand_select_chip+0x18/0x2c) from [<
c02d25c0>] (nand_do_read_ops+0x90/0x424)
[<
c02d25c0>] (nand_do_read_ops+0x90/0x424) from [<
c02d2dd8>] (nand_read+0x54/0x78)
[<
c02d2dd8>] (nand_read+0x54/0x78) from [<
c02ad2c8>] (mtd_read+0x84/0xbc)
[<
c02ad2c8>] (mtd_read+0x84/0xbc) from [<
c02d4b28>] (scan_read.clone.4+0x4c/0x64)
[<
c02d4b28>] (scan_read.clone.4+0x4c/0x64) from [<
c02d4c88>] (search_bbt+0x148/0x290)
[<
c02d4c88>] (search_bbt+0x148/0x290) from [<
c02d4ea4>] (nand_scan_bbt+0xd4/0x5c0)
[... trim ...]
---[ end trace
0c9363860d865ff2 ]---
So to fix this, just truncate these dimensions down to the greatest
power-of-2 dimension that is less than or equal to the specified
dimension.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Mon, 14 Oct 2013 16:12:24 +0000 (12:12 -0400)]
loop: fix crash if blk_alloc_queue fails
commit
3ec981e30fae1f3c8728a05c730acaa1f627bcfb upstream.
loop: fix crash if blk_alloc_queue fails
If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the
identifier allocated with idr_alloc. That causes crash on module unload in
idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to
remove non-existed device with that id.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000380
IP: [<
ffffffff812057c9>] del_gendisk+0x19/0x2d0
PGD
43d399067 PUD
43d0ad067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but!
ton unix
CPU: 7 PID: 2735 Comm: rmmod Tainted: G W 3.10.15-devel #15
Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009
task:
ffff88043d38e780 ti:
ffff88043d21e000 task.ti:
ffff88043d21e000
RIP: 0010:[<
ffffffff812057c9>] [<
ffffffff812057c9>] del_gendisk+0x19/0x2d0
RSP: 0018:
ffff88043d21fe10 EFLAGS:
00010282
RAX:
ffffffffa05102e0 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffff88043ea82800 RDI:
0000000000000000
RBP:
ffff88043d21fe48 R08:
0000000000000000 R09:
0000000000000001
R10:
0000000000000001 R11:
0000000000000000 R12:
00000000000000ff
R13:
0000000000000080 R14:
0000000000000000 R15:
ffff88043ea82800
FS:
00007ff646534700(0000) GS:
ffff880447000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
0000000000000380 CR3:
000000043e9bf000 CR4:
00000000000007e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Stack:
ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800
00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60
ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec
Call Trace:
[<
ffffffff8100aba4>] ? native_sched_clock+0x24/0x80
[<
ffffffffa05102b4>] loop_remove+0x14/0x40 [loop]
[<
ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop]
[<
ffffffff81217b74>] idr_for_each+0x104/0x190
[<
ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop]
[<
ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0
[<
ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop]
[<
ffffffff810a98ea>] SyS_delete_module+0x13a/0x260
[<
ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<
ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00
00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20
RIP [<
ffffffff812057c9>] del_gendisk+0x19/0x2d0
RSP <
ffff88043d21fe10>
CR2:
0000000000000380
---[ end trace
64ec069ec70f1309 ]---
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 4 Oct 2013 13:29:06 +0000 (09:29 -0400)]
IB/ipath: Convert ipath_user_sdma_pin_pages() to use get_user_pages_fast()
commit
4adcf7fb6783e354aab38824d803fa8c4f8e8a27 upstream.
ipath_user_sdma_queue_pkts() gets called with mmap_sem held for
writing. Except for get_user_pages() deep down in
ipath_user_sdma_pin_pages() we don't seem to need mmap_sem at all.
Even more interestingly the function ipath_user_sdma_queue_pkts() (and
also ipath_user_sdma_coalesce() called somewhat later) call
copy_from_user() which can hit a page fault and we deadlock on trying
to get mmap_sem when handling that fault. So just make
ipath_user_sdma_pin_pages() use get_user_pages_fast() and leave
mmap_sem locking for mm.
This deadlock has actually been observed in the wild when the node
is under memory pressure.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
[ Merged in fix for call to get_user_pages_fast from Tetsuo Handa
<penguin-kernel@I-love.SAKURA.ne.jp>. - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Seppanen [Wed, 20 Nov 2013 22:19:52 +0000 (14:19 -0800)]
iscsi-target: chap auth shouldn't match username with trailing garbage
commit
86784c6bdeeef78eed94d298be7a8879f6a97ee2 upstream.
In iSCSI negotiations with initiator CHAP enabled, usernames with
trailing garbage are permitted, because the string comparison only
checks the strlen of the configured username.
e.g. "usernameXXXXX" will be permitted to match "username".
Just check one more byte so the trailing null char is also matched.
Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Seppanen [Wed, 20 Nov 2013 22:19:51 +0000 (14:19 -0800)]
iscsi-target: fix extract_param to handle buffer length corner case
commit
369653e4fb511928511b0ce81f41c812ff1f28b6 upstream.
extract_param() is called with max_length set to the total size of the
output buffer. It's not safe to allow a parameter length equal to the
buffer size as the terminating null would be written one byte past the
end of the output buffer.
Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samir Benmendil [Sun, 17 Nov 2013 22:56:17 +0000 (23:56 +0100)]
ahci: add Marvell 9230 to the AHCI PCI device list
commit
6d5278a68a75891db1df5ae1ecf83d288fc58c65 upstream.
Tested with a DAWICONTROL DC-624e on 3.10.10
Signed-off-by: Samir Benmendil <samir.benmendil@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xiangliang yu [Sun, 27 Oct 2013 12:03:04 +0000 (08:03 -0400)]
ahci: disabled FBS prior to issuing software reset
commit
89dafa20f3daab5b3e0c13d0068a28e8e64e2102 upstream.
Tested with Marvell 88se9125, attached with one port mulitplier(5 ports)
and one disk, we will get following boot log messages if using current
code:
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata8.15: Port Multiplier 1.2, 0x1b4b:0x9715 r160, 5 ports, feat 0x1/0x1f
ahci 0000:03:00.0: FBS is enabled
ata8.00: hard resetting link
ata8.00: SATA link down (SStatus 0 SControl 330)
ata8.01: hard resetting link
ata8.01: SATA link down (SStatus 0 SControl 330)
ata8.02: hard resetting link
ata8.02: SATA link down (SStatus 0 SControl 330)
ata8.03: hard resetting link
ata8.03: SATA link up 6.0 Gbps (SStatus 133 SControl 133)
ata8.04: hard resetting link
ata8.04: failed to resume link (SControl 133)
ata8.04: failed to read SCR 0 (Emask=0x40)
ata8.04: failed to read SCR 0 (Emask=0x40)
ata8.04: failed to read SCR 1 (Emask=0x40)
ata8.04: failed to read SCR 0 (Emask=0x40)
ata8.03: native sectors (2) is smaller than sectors (
976773168)
ata8.03: ATA-8: ST3500413AS, JC4B, max UDMA/133
ata8.03:
976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata8.03: configured for UDMA/133
ata8.04: failed to IDENTIFY (I/O error, err_mask=0x100)
ata8.15: hard resetting link
ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
ata8.15: PMP revalidation failed (errno=-19)
ata8.15: hard resetting link
ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
ata8.15: PMP revalidation failed (errno=-19)
ata8.15: limiting SATA link speed to 3.0 Gbps
ata8.15: hard resetting link
ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
ata8.15: PMP revalidation failed (errno=-19)
ata8.15: failed to recover PMP after 5 tries, giving up
ata8.15: Port Multiplier detaching
ata8.03: disabled
ata8.00: disabled
ata8: EH complete
The reason is that current detection code doesn't follow AHCI spec:
First,the port multiplier detection process look like this:
ahci_hardreset(link, class, deadline)
if (class == ATA_DEV_PMP) {
sata_pmp_attach(dev) /* will enable FBS */
sata_pmp_init_links(ap, nr_ports);
ata_for_each_link(link, ap, EDGE) {
sata_std_hardreset(link, class, deadline);
if (link_is_online) /* do soft reset */
ahci_softreset(link, class, deadline);
}
}
But, according to chapter 9.3.9 in AHCI spec: Prior to issuing software
reset, software shall clear PxCMD.ST to '0' and then clear PxFBS.EN to
'0'.
The patch test ok with kernel 3.11.1.
tj: Patch white space contaminated, applied manually with trivial
updates.
Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 11 Nov 2013 04:11:16 +0000 (22:11 -0600)]
rtlwifi: rtl8192cu: Fix more pointer arithmetic errors
commit
eafbdde9c5629bea58df07275c5917eb42afbbe7 upstream.
This driver uses a number of macros to get and set various fields in the
RX and TX descriptors. To work correctly, a u8 pointer to the descriptor
must be used; however, in some cases a descriptor structure pointer is used
instead. In addition, a duplicated statement is removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Pena [Sat, 19 Oct 2013 00:52:40 +0000 (21:52 -0300)]
rtlwifi: rtl8192se: Fix wrong assignment
commit
3aef7dde8dcf09e0124f0a2665845a507331972b upstream.
There is a typo in the struct member name on assignment when checking
rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40, the check uses pwrgroup_ht40
for bound limit and uses pwrgroup_ht20 when assigning instead.
Signed-off-by: Felipe Pena <felipensp@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryan Mallon [Tue, 12 Nov 2013 23:08:51 +0000 (15:08 -0800)]
vsprintf: check real user/group id for %pK
commit
312b4e226951f707e120b95b118cbc14f3d162b2 upstream.
Some setuid binaries will allow reading of files which have read
permission by the real user id. This is problematic with files which
use %pK because the file access permission is checked at open() time,
but the kptr_restrict setting is checked at read() time. If a setuid
binary opens a %pK file as an unprivileged user, and then elevates
permissions before reading the file, then kernel pointer values may be
leaked.
This happens for example with the setuid pppd application on Ubuntu 12.04:
$ head -1 /proc/kallsyms
00000000 T startup_32
$ pppd file /proc/kallsyms
pppd: In file /proc/kallsyms: unrecognized option '
c1000000'
This will only leak the pointer value from the first line, but other
setuid binaries may leak more information.
Fix this by adding a check that in addition to the current process having
CAP_SYSLOG, that effective user and group ids are equal to the real ids.
If a setuid binary reads the contents of a file which uses %pK then the
pointer values will be printed as NULL if the real user is unprivileged.
Update the sysctl documentation to reflect the changes, and also correct
the documentation to state the kptr_restrict=0 is the default.
This is a only temporary solution to the issue. The correct solution is
to do the permission check at open() time on files, and to replace %pK
with a function which checks the open() time permission. %pK uses in
printk should be removed since no sane permission check can be done, and
instead protected by using dmesg_restrict.
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shan Hai [Mon, 28 Oct 2013 08:08:01 +0000 (16:08 +0800)]
drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive
commit
0523f037f65dba10191b0fa9c51266f90ba64630 upstream.
The "Slimtype DVD A DS8A9SH" drive locks up with following backtrace when
the max sector is smaller than 65535 bytes, fix it by adding a quirk to set
the max sector to 65535 bytes.
INFO: task flush-11:0:663 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-11:0 D
00000000ffff5ceb 0 663 2 0x00000000
ffff88026d3b1710 0000000000000046 0000000000000001 0000000000000000
ffff88026f2530c0 ffff88026d365860 ffff88026d3b16e0 ffffffff812ffd52
ffff88026d4fd3d0 0000000100000001 ffff88026d3b16f0 ffff88026d3b1fd8
Call Trace:
[<
ffffffff812ffd52>] ? cfq_may_queue+0x52/0xf0
[<
ffffffff81604338>] schedule+0x18/0x30
[<
ffffffff81604392>] io_schedule+0x42/0x60
[<
ffffffff812f22bb>] get_request_wait+0xeb/0x1f0
[<
ffffffff81065660>] ? autoremove_wake_function+0x0/0x40
[<
ffffffff812eb382>] ? elv_merge+0x42/0x210
[<
ffffffff812f26ae>] __make_request+0x8e/0x4e0
[<
ffffffff812f068e>] generic_make_request+0x21e/0x5e0
[<
ffffffff812f0aad>] submit_bio+0x5d/0xd0
[<
ffffffff81141422>] submit_bh+0xf2/0x130
[<
ffffffff8114474c>] __block_write_full_page+0x1dc/0x3a0
[<
ffffffff81143f60>] ? end_buffer_async_write+0x0/0x120
[<
ffffffff811474e0>] ? blkdev_get_block+0x0/0x70
[<
ffffffff811474e0>] ? blkdev_get_block+0x0/0x70
[<
ffffffff81143f60>] ? end_buffer_async_write+0x0/0x120
[<
ffffffff811449ee>] block_write_full_page_endio+0xde/0x100
[<
ffffffff81144a20>] block_write_full_page+0x10/0x20
[<
ffffffff81148703>] blkdev_writepage+0x13/0x20
[<
ffffffff810d7525>] __writepage+0x15/0x40
[<
ffffffff810d7c0f>] write_cache_pages+0x1cf/0x3e0
[<
ffffffff810d7510>] ? __writepage+0x0/0x40
[<
ffffffff810d7e42>] generic_writepages+0x22/0x30
[<
ffffffff810d7e6f>] do_writepages+0x1f/0x40
[<
ffffffff8113ae67>] writeback_single_inode+0xe7/0x3b0
[<
ffffffff8113b574>] writeback_sb_inodes+0x184/0x280
[<
ffffffff8113bedb>] writeback_inodes_wb+0x6b/0x1a0
[<
ffffffff8113c24b>] wb_writeback+0x23b/0x2a0
[<
ffffffff8113c42d>] wb_do_writeback+0x17d/0x190
[<
ffffffff8113c48b>] bdi_writeback_task+0x4b/0xe0
[<
ffffffff810e82a0>] ? bdi_start_fn+0x0/0x100
[<
ffffffff810e8321>] bdi_start_fn+0x81/0x100
[<
ffffffff810e82a0>] ? bdi_start_fn+0x0/0x100
[<
ffffffff8106522e>] kthread+0x8e/0xa0
[<
ffffffff81039274>] ? finish_task_switch+0x54/0xc0
[<
ffffffff81003334>] kernel_thread_helper+0x4/0x10
[<
ffffffff810651a0>] ? kthread+0x0/0xa0
[<
ffffffff81003330>] ? kernel_thread_helper+0x0/0x10
The above trace was triggered by
"dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768"
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gwendal Grignou [Fri, 25 Oct 2013 23:28:57 +0000 (16:28 -0700)]
libata: Fix display of sata speed
commit
3e85c3ecbc520751324a191d23bb94873ed01b10 upstream.
6.0 Gbps link speed was not decoded properly:
speed was reported at 3.0 Gbps only.
Tested: On a machine where libata reports 6.0 Gbps in
/var/log/messages:
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Before:
cat /sys/class/ata_link/link1/sata_spd
3.0 Gbps
After:
cat /sys/class/ata_link/link1/sata_spd
6.0 Gbps
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>