[netdrvr] dm9000: use delayed work to update mii phy state fix

use cancel_delayed_work_sync()

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sky2: restore vlan acceleration on reset

If device has to be reset by sky2_restart, then need to restore
the VLAN acceleration settings.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Remove sub-minor component from driver version

This driver has diverged from the out-of-tree driver to which the version
number originally applied.  It should be identified primarily by kernel
version.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Added checks for heap allocation failure

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Remove redundant casts to and from void *

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Change type of efx_nic::nic_data to struct falcon_nic_data *

Remove redundant casts and variable.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Use __packed macro

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Do not define inline macro

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Use DMA_BIT_MASK() instead of our own DMA mask macros

Also change type of efx_nic_type::max_dma_mask to u64, matching
pci_dma_supported() parameter type.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Correct and expand some comments

These comments have been revised in response to questions raised by Andrew
Morton in <20080501120858.207b6dd6.akpm@linux-foundation.org>.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Use resource_size_t for PCI bus address

This should make the driver work on 32-bit systems with 64-bit PCI support.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Merged efx_page_offset() into efx_rx_buf_offset()

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Replaced various macros with inline functions

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Added and removed braces to comply with kernel style

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Removed unncesssary UL suffixes on 0 literals

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Simplified efx_rx_calc_buffer_size() using get_order()

Merged it into its only caller, efx_init_channels().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Removed casts to void

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

sfc: Use mod_timer() to set expiry and add_timer() together

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

net: The world is not perfect patch.

  Unless there will be any objection here, I suggest consider the
following patch which simply removes the code for the
-DI_WISH_WORLD_WERE_PERFECT in the three methods which use it.

The compilation errors we get when using -DI_WISH_WORLD_WERE_PERFECT
show that this code was not built and not used for really a long time.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Make prior_ssthresh a u32

If previous window was above representable values of u16,
strange things will happen if undo with the truncated value
is called for. Alternatively, this could be fixed by some
max trickery but that would limit undoing high-speed undos.

Adds 16-bit hole but there isn't anything to fill it with.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm_user: Remove zero length key checks.

The crypto layer will determine whether that is valid
or not.

Suggested by Herbert Xu, based upon a report and patch
by Martin Willi.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>

net/ipv4/arp.c: Use common hex_asc helpers

Here the local hexbuf is a duplicate of global const char hex_asc from
lib/hexdump.c, except the hex letters' cases:

const char hexbuf[] = "0123456789ABCDEF";

const char hex_asc[] = "0123456789abcdef";

and here to print HW addresses, the hex cases are not significant.

Thanks to Harvey Harrison to introduce the hex_asc_hi/hex_asc_lo helpers.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cassini: Only use chip checksum for ipv4 packets.

According to David Monro, at least with Natsemi Saturn chips the
cassini driver has some trouble with ipv6 checksums.

Until we have more information about what's going on here, only
use the chip checksums for ipv4.

This workaround was suggested and tested by David.

Update version and release date.

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: TCP connection times out if ICMP frag needed is delayed

We are seeing an issue with TCP in handling an ICMP frag needed
message that is received after net.ipv4.tcp_retries1 retransmits.
The default value of retries1 is 3. So if the path mtu changes
and ICMP frag needed is lost for the first 3 retransmits or if
it gets delayed until 3 retransmits are done, TCP doesn't update
MSS correctly and continues to retransmit the orginal message
until it timesout after tcp_retries2 retransmits.

I am seeing this issue even with the latest 2.6.25.4 kernel.

In tcp_retransmit_timer(), when retransmits counter exceeds
tcp_retries1 value, the dst cache entry of the socket is reset.
At this time, if we receive an ICMP frag needed message, the
dst entry gets updated with the new MTU, but the TCP sockets
dst_cache entry remains NULL.

So the next time when we try to retransmit after the ICMP frag
needed is received, tcp_retransmit_skb() gets called. Here the
cur_mss value is calculated at the start of the routine with
a NULL sk_dst_cache. Instead we should call tcp_current_mss after
the rebuild_header that caches the dst entry with the updated mtu.
Also the rebuild_header should be called before tcp_fragment
so that skb is fragmented if the mss goes down.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: Move linux/types.h inclusions outside of #ifdef __KERNEL__

Greg Steuck <greg@nest.cx> points out that some of the netfilter
headers can't be used in userspace without including linux/types.h
first. The headers include their own linux/types.h include statements,
these are stripped by make headers-install because they are inside
#ifdef __KERNEL__ however. Move them out to fix this.

Reported and Tested by Greg Steuck.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_key: Fix selector family initialization.

This propagates the xfrm_user fix made in commit
bcf0dda8d2408fe1c1040cdec5a98e5fcad2ac72 ("[XFRM]: xfrm_user: fix
selector family initialization")

Based upon a bug report from, and tested by, Alan Swanson.

Signed-off-by: Kazunori MIYAZAWA <kazunori@miyazawa.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of /linux/kernel/git/linville/wireless-2.6

libertas: Fix ethtool statistics

Fix various problems:
 - We converted MESH_ACCESS to a direct command but missed this caller.
 - We were trying to access mesh stats even on meshless firmware.
 - We should really zero the buffer if something goes wrong.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix NULL pointer dereference in ieee80211_compatible_rates

Fix a possible NULL pointer dereference in ieee80211_compatible_rates
introduced in the patch "mac80211: fix association with some APs". If no bss
is available just use all supported rates in the association request.

Signed-off-by: Helmut Schaa <hschaa@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

pktgen: make sure that pktgen_thread_worker has been executed

The following courruption can happen during pktgen stop:
list_del corruption. prev->next should be ffff81007e8a5e70, but was 6b6b6b6b6b6b6b6b
kernel BUG at lib/list_debug.c:67!
      :pktgen:pktgen_thread_worker+0x374/0x10b0
      ? autoremove_wake_function+0x0/0x40
      ? _spin_unlock_irqrestore+0x42/0x80
      ? :pktgen:pktgen_thread_worker+0x0/0x10b0
      kthread+0x4d/0x80
      child_rip+0xa/0x12
      ? restore_args+0x0/0x30
      ? kthread+0x0/0x80
      ? child_rip+0x0/0x12
RIP  list_del+0x48/0x70

The problem is that pktgen_thread_worker can not be executed if kthread_stop
has been called too early. Insert a completion on the normal initialization
path to make sure that pktgen_thread_worker will gain the control for sure.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: don't claim iwspy support

We removed iwspy support a very long time ago because it is useless, but
forgot to stop claiming to support it. Apparently, nobody cares, but
remove it nonetheless.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

orinoco_cs: add ID for SpeedStream wireless adapters

Reported by Gerald Willmann <gerald.willmann@econ.kuleuven.be>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

hostap_cs: add ID for Conceptronic CON11CPro

Reported by Santiago Garcia Mantinan <hostap@manty.net>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rtl8187: resource leak in error case

This fixes resource leaks in error cases due to urb submission
failures.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[VLAN]: Propagate selected feature bits to VLAN devices

Propagate feature bits from the NETDEV_FEAT_CHANGE notifier. For now
only TSO is propagated for devices that announce their ability to
support TSO in combination with VLAN accel by setting the NETIF_F_VLAN_TSO
flag.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/atm/: remove CVS keywords

This patch removes CVS keywords that weren't updated for a long time.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

ath5k: Fix loop variable initializations

In ath5k_tasklet_rx, both status structures 'rxs' and 'rs' are
initialized at the top of the tasklet, but not within the loop.
If the loop is executed multiple times in the tasklet then the
variables may see changes from previous packets.

For TKIP, this results in 'Invalid Michael MIC' errors if two packets
are processed in the tasklet: rxs.flag gets set to RX_DECRYPTED by
mac80211 when it decrypts the first encrypted packet.  The subsequent
packet will have RX_DECRYPTED set upon entry to mac80211, so mac80211
will not try to decrypt it.

We currently initialize all but two fields in the structures, so fix
the other two.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

vlan: Correctly handle device notifications for layered VLAN devices

Commit 30688a9 ([VLAN]: Handle vlan devices net namespace changing)
changed the device notifier to special-case notifications for VLAN
devices, effectively disabling state propagation to underlying VLAN
devices. This is needed for layered VLANs though, so restore the
original behaviour.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Fix call to ->change_rx_flags(dev, IFF_MULTICAST) in dev_change_flags()

Am I just being particularly dim today, or can the call to
dev->change_rx_flags(dev, IFF_MULTICAST) in dev_change_flags() never
happen?

We've just set dev->flags = flags & IFF_MULTICAST, effectively. So the
condition '(dev->flags ^ flags) & IFF_MULTICAST' is _never_ going to be
true.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: cls_api: fix return value for non-existant classifiers

cls_api should return ENOENT when the requested classifier doesn't
exist.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipsec: Use the correct ip_local_out function

Because the IPsec output function xfrm_output_resume does its
own dst_output call it should always call __ip_local_output
instead of ip_local_output as the latter may invoke dst_output
directly.  Otherwise the return values from nf_hook and dst_output
may clash as they both use the value 1 but for different purposes.

When that clash occurs this can cause a packet to be used after
it has been freed which usually leads to a crash.  Because the
offending value is only returned from dst_output with qdiscs
such as HTB, this bug is normally not visible.

Thanks to Marco Berizzi for his perseverance in tracking this
down.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6 addrconf: Allow infinite prefix lifetime.

We need to handle infinite prefix lifetime specially.
With help from original reporter "Bonitch, Joseph"
<Joseph.Bonitch@xerox.com>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6 route: Fix lifetime in netlink.

We could not see appropriate lifetime if the route had been scheduled
to expired at 0 (in jiffies).  We should check rt6i_flags instead of
rt6i_expires to determine whether lifetime is valid or not.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6 addrconf: Fix route lifetime setting in corner case.

Because of arithmetic overflow avoidance, the actual lifetime setting
(vs the value given by RA) did not increase monotonically around
0x7fffffff/HZ.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of /linux/kernel/git/linville/wireless-2.6

ndisc: Add missing strategies for per-device retrans timer/reachable time settings.

Noticed from Al Viro <viro@ftp.linux.org.uk> via David Miller
<davem@davemloft.net>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Move <linux/in6.h> from header-y to unifdef-y.

Given that <linux/in6.h> contains a __KERNEL__ test, it should be
unifdef-ed.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: avoid skb truesize bug if headroom is increased

A user reported seeing occasional bugs such as the following when
using the L2TP driver.

  SKB BUG: Invalid truesize (272) len=72, sizeof(sk_buff)=208

When L2TP adds its header in the transmit path, it might need to
increase the headroom of the skb. In some cases, the increased
headroom trips a kernel bug when the skb is freed because the skb has
grown beyond its truesize value. The fix is to increase the truesize
by the amount of headroom added, after orphaning the skb.

While here, fix a misleading comment.

Thanks to Iouri Kharon <bc-info@styx.cabel.net> for the initial
report and testing the fix.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireless: Create 'device' symlink in sysfs

Some network interfaces of the wireless drivers lack the 'device'
symlink in sysfs.
This patch lets the drivers create the links.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless, airo: waitbusy() won't delay

There will be no delay even when COMMAND_BUSY (defined 0x8000) is set:
0x8000 & (delay < 10000) will evaluate to 0 - when delay is 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: fix command timeout after firmware failure

This is a fix for OLPC ticket #6586: "SCAN command fails, timer doesn't
fire". In fact, the timer was firing; the problem was that the dnld_sent
state variable was not being updated after the timer expired, so
lbs_execute_next_command was not being called.

Signed-off-by: Brian Cavagnolo <brian@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Add RTNL version of ieee80211_iterate_active_interfaces

Since commit e38bad4766a110b61fa6038f10be16ced8c6cc38
mac80211: make ieee80211_iterate_active_interfaces not need rtnl
rt2500usb and rt73usb broke down due to attempting register access
in atomic context (which is not possible for USB hardware).

This patch restores ieee80211_iterate_active_interfaces() to use RTNL lock,
and provides the non-RTNL version under a new name:
ieee80211_iterate_active_interfaces_atomic()

So far only rt2x00 uses ieee80211_iterate_active_interfaces(), and those
drivers require the RTNL version of ieee80211_iterate_active_interfaces().
Since they already call that function directly, this patch will automatically
fix the USB rt2x00 drivers.

v2: Rename ieee80211_iterate_active_interfaces_rtnl

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211 : Association with 11n hidden ssid ap.

This patch fixes the association problem with 11n hidden ssid ap.
Patch fixes the problem of associating with hidden ssid when
all three parameters ap,essid and channel are given to iwconfig.
This patch removes the condition of checking three parameters
and always checks for bss in bss list while associating.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

hostap: fix "registers" registration in procfs

The "registers" entry was incorrectly created in the procfs root instead
of the device specific directory.  Move "registers" registration
immediately after the containing procfs directory is created.

Signed-off-by: Mathieu Chouquet-Stringer <mchouque@free.fr>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

isdn/capi: Return proper errnos on module init.

cdebug_init() is called from kcapi_init() which is module
initialization function, so it must return negative values on errors.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

iphase: Fix 64bit warning.

Time is unsigned long (except when you are in a hurry) so we need to
store rx_tmp_jif in the right sized object.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

hysdn: No longer broken on SMP.

With the cli/sti code sorted out we think this driver is OK for use on
SMP systems.

Acked-by: Mark Asselstine <mark.asselstine@windriver.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

hysdn: Remove cli()/sti() calls.

The use of cli()/sti() within the do/while was a way to ensure
interrupts were only disabled for short periods of time while the bulk
of the time interrupts were free to occur.  The use of the spin lock
has eliminated the need to play with interrupts in this way while
still allowing for IO to be protected.

The remaining 3 sti() calls seem unneeded now that at no other point
in the driver is there a call to cli().

Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

atm: Cleanup atm_tcp.h and atm.h for userspace.

The atm_tcp.h uses types from linux/atm.h, but does not include it.
It should also use the standard __u## types from linux/types.h rather
than the uint##_t types since the former can be found with the kernel
already.

Same goes for linux/atm.h.  The linux/socket.h include there also gets
dropped as atm.h does not actually use anything from socket.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: handle case of device named bonding_master

If device already exists named bonding_masters, then fail. This is a wierd
corner case only a QA group could love.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysfs: remove error messages for -EEXIST case

It is possible that the entry in sysfs already exists, one case of this is
when a network device is renamed to bonding_masters. Anyway, in this case
the proper error path is for device_rename to return an error code, not to
generate bogus backtrace and errors.

Also, to avoid possible races, the create link should be done before the
remove link. This makes a device rename atomic operation like other renames.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: handle errors from device_rename

device_rename can fail with -EEXIST or -ENOMEM, so handle any
problems.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs

* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: fix error path during early mount
  9p: make cryptic unknown error from server less scary
  9p: fix flags length in net
  9p: Correct fidpool creation failure in p9_client_create
  9p: use struct mutex instead of struct semaphore
  9p: propagate parse_option changes to client and transports
  fs/9p/v9fs.c (v9fs_parse_options): Handle kstrdup and match_strdup failure.
  9p: Documentation updates
  add match_strlcpy() us it to make v9fs make uname and remotename parsing more robust

Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Use a TS_RESTORE_SIGMASK
  lmb: Make lmb debugging more useful.
  lmb: Fix inconsistent alignment of size argument.
  sparc: Fix mremap address range validation.

net/irda/irnet/irnet_irda.c needs unaligned.h

net/irda/irnet/irnet_irda.c: In function 'irnet_discovery_indication':
net/irda/irnet/irnet_irda.c:1676: error: implicit declaration of function 'get_unaligned'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty_check_change(): avoid taking tasklist_lock while holding tty->ctrl_lock

May 11 09:42:27 [kernel] [ 1104.496819] rarian-sk-get-c[5630]: segfault at 0 ip 7f478556caf0 sp 7fff8e3fe338 error 4 in libc-2.6.1.so[7f47854f9000+136000]
May 11 10:59:48 [kernel] [ 2494.165792]
May 11 10:59:48 [kernel] [ 2494.165794] =======================================================
May 11 10:59:48 [kernel] [ 2494.165801] [ INFO: possible circular locking dependency detected ]
May 11 10:59:48 [kernel] [ 2494.165805] 2.6.26-rc1-00007-g91b3a7a #217
May 11 10:59:48 [kernel] [ 2494.165807] -------------------------------------------------------
May 11 10:59:48 [kernel] [ 2494.165809] less/7053 is trying to acquire lock:
May 11 10:59:48 [kernel] [ 2494.165812]  (tasklist_lock){..??}, at: [<ffffffff80232e95>] is_current_pgrp_orphaned+0x15/0x50
May 11 10:59:48 [kernel] [ 2494.165821]
May 11 10:59:48 [kernel] [ 2494.165822] but task is already holding lock:
May 11 10:59:48 [kernel] [ 2494.165824]  (&tty->ctrl_lock){....}, at: [<ffffffff803d5f31>] tty_check_change+0x61/0x110
May 11 10:59:48 [kernel] [ 2494.165831]
May 11 10:59:48 [kernel] [ 2494.165832] which lock already depends on the new lock.
May 11 10:59:48 [kernel] [ 2494.165833]
May 11 10:59:48 [kernel] [ 2494.165835]
May 11 10:59:48 [kernel] [ 2494.165836] the existing dependency chain (in reverse order) is:
May 11 10:59:48 [kernel] [ 2494.165838]
May 11 10:59:48 [kernel] [ 2494.165839] -> #2 (&tty->ctrl_lock){....}:
May 11 10:59:48 [kernel] [ 2494.165843]        [<ffffffff80253796>] __lock_acquire+0xf86/0x1080
May 11 10:59:48 [kernel] [ 2494.165851]        [<ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.165858]        [<ffffffff804deee0>] _spin_lock_irqsave+0x40/0x60
May 11 10:59:48 [kernel] [ 2494.165866]        [<ffffffff803d31b5>] __proc_set_tty+0x35/0xe0
May 11 10:59:48 [kernel] [ 2494.165873]        [<ffffffff803d76d4>] tty_ioctl+0xbf4/0xfe0
May 11 10:59:48 [kernel] [ 2494.165880]        [<ffffffff802a05e1>] vfs_ioctl+0x31/0x90
May 11 10:59:48 [kernel] [ 2494.165888]        [<ffffffff802a06b3>] do_vfs_ioctl+0x73/0x2d0
May 11 10:59:48 [kernel] [ 2494.165895]        [<ffffffff802a095a>] sys_ioctl+0x4a/0x80
May 11 10:59:48 [kernel] [ 2494.165902]        [<ffffffff8020b5ab>] system_call_after_swapgs+0x7b/0x80
May 11 10:59:48 [kernel] [ 2494.165910]        [<ffffffffffffffff>] 0xffffffffffffffff
May 11 10:59:48 [kernel] [ 2494.165924]
May 11 10:59:48 [kernel] [ 2494.165925] -> #1 (&sighand->siglock){++..}:
May 11 10:59:48 [kernel] [ 2494.165929]        [<ffffffff80253796>] __lock_acquire+0xf86/0x1080
May 11 10:59:48 [kernel] [ 2494.165936]        [<ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.165943]        [<ffffffff804dec1f>] _spin_lock+0x2f/0x40
May 11 10:59:48 [kernel] [ 2494.165951]        [<ffffffff8022d5a3>] copy_process+0x973/0x1210
May 11 10:59:48 [kernel] [ 2494.165959]        [<ffffffff8022df12>] do_fork+0x82/0x2f0
May 11 10:59:48 [kernel] [ 2494.165967]        [<ffffffff8020bfe1>] kernel_thread+0x81/0xde
May 11 10:59:48 [kernel] [ 2494.165974]        [<ffffffff8020c048>] child_rip+0xa/0x12
May 11 10:59:48 [kernel] [ 2494.165981]        [<ffffffffffffffff>] 0xffffffffffffffff
May 11 10:59:48 [kernel] [ 2494.166038]
May 11 10:59:48 [kernel] [ 2494.166039] -> #0 (tasklist_lock){..??}:
May 11 10:59:48 [kernel] [ 2494.166043]        [<ffffffff802535ab>] __lock_acquire+0xd9b/0x1080
May 11 10:59:48 [kernel] [ 2494.166050]        [<ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.166057]        [<ffffffff804dede2>] _read_lock+0x32/0x50
May 11 10:59:48 [kernel] [ 2494.166063]        [<ffffffff80232e95>] is_current_pgrp_orphaned+0x15/0x50
May 11 10:59:48 [kernel] [ 2494.166071]        [<ffffffff803d5f80>] tty_check_change+0xb0/0x110
May 11 10:59:48 [kernel] [ 2494.166078]        [<ffffffff803dac5f>] set_termios+0x1f/0x4c0
May 11 10:59:48 [kernel] [ 2494.166085]        [<ffffffff803db379>] tty_mode_ioctl+0x279/0x3e0
May 11 10:59:48 [kernel] [ 2494.166092]        [<ffffffff803db51d>] n_tty_ioctl+0x3d/0x260
May 11 10:59:48 [kernel] [ 2494.166100]        [<ffffffff803d6c34>] tty_ioctl+0x154/0xfe0
May 11 10:59:48 [kernel] [ 2494.166107]        [<ffffffff802a05e1>] vfs_ioctl+0x31/0x90
May 11 10:59:48 [kernel] [ 2494.166114]        [<ffffffff802a06b3>] do_vfs_ioctl+0x73/0x2d0
May 11 10:59:48 [kernel] [ 2494.166121]        [<ffffffff802a095a>] sys_ioctl+0x4a/0x80
May 11 10:59:48 [kernel] [ 2494.166128]        [<ffffffff8020b5ab>] system_call_after_swapgs+0x7b/0x80
May 11 10:59:48 [kernel] [ 2494.166135]        [<ffffffffffffffff>] 0xffffffffffffffff
May 11 10:59:48 [kernel] [ 2494.166142]
May 11 10:59:48 [kernel] [ 2494.166143] other info that might help us debug this:
May 11 10:59:48 [kernel] [ 2494.166144]
May 11 10:59:48 [kernel] [ 2494.166146] 1 lock held by less/7053:
May 11 10:59:48 [kernel] [ 2494.166148]  #0:  (&tty->ctrl_lock){....}, at: [<ffffffff803d5f31>] tty_check_change+0x61/0x110
May 11 10:59:48 [kernel] [ 2494.166155]
May 11 10:59:48 [kernel] [ 2494.166156] stack backtrace:
May 11 10:59:48 [kernel] [ 2494.166159] Pid: 7053, comm: less Not tainted 2.6.26-rc1-00007-g91b3a7a #217
May 11 10:59:48 [kernel] [ 2494.166161]
May 11 10:59:48 [kernel] [ 2494.166162] Call Trace:
May 11 10:59:48 [kernel] [ 2494.166168]  [<ffffffff80251223>] print_circular_bug_tail+0x83/0x90
May 11 10:59:48 [kernel] [ 2494.166172]  [<ffffffff80250889>] ? print_circular_bug_entry+0x49/0x60
May 11 10:59:48 [kernel] [ 2494.166178]  [<ffffffff802535ab>] __lock_acquire+0xd9b/0x1080
May 11 10:59:48 [kernel] [ 2494.166184]  [<ffffffff80232e95>] ? is_current_pgrp_orphaned+0x15/0x50
May 11 10:59:48 [kernel] [ 2494.166189]  [<ffffffff80253922>] lock_acquire+0x92/0xc0
May 11 10:59:48 [kernel] [ 2494.166206]  [<ffffffff803d5f80>] tty_check_change+0xb0/0x110
May 11 10:59:48 [kernel] [ 2494.166211]  [<ffffffff803dac5f>] set_termios+0x1f/0x4c0
May 11 10:59:48 [kernel] [ 2494.166216]  [<ffffffff803d3423>] ? tty_ldisc_try+0x23/0x60
May 11 10:59:48 [kernel] [ 2494.166220]  [<ffffffff803d3444>] ? tty_ldisc_try+0x44/0x60
May 11 10:59:48 [kernel] [ 2494.166224]  [<ffffffff804df2c5>] ? _spin_unlock_irqrestore+0x65/0x80
May 11 10:59:48 [kernel] [ 2494.166230]  [<ffffffff803db379>] tty_mode_ioctl+0x279/0x3e0
May 11 10:59:48 [kernel] [ 2494.166234]  [<ffffffff803d3444>] ? tty_ldisc_try+0x44/0x60
May 11 10:59:48 [kernel] [ 2494.166239]  [<ffffffff803db51d>] n_tty_ioctl+0x3d/0x260
May 11 10:59:48 [kernel] [ 2494.166244]  [<ffffffff803d6c34>] tty_ioctl+0x154/0xfe0
May 11 10:59:48 [kernel] [ 2494.166249]  [<ffffffff80252baa>] ? __lock_acquire+0x39a/0x1080
May 11 10:59:48 [kernel] [ 2494.166256]  [<ffffffff80252baa>] ? __lock_acquire+0x39a/0x1080
May 11 10:59:48 [kernel] [ 2494.166263]  [<ffffffff80252baa>] ? __lock_acquire+0x39a/0x1080
May 11 10:59:48 [kernel] [ 2494.166269]  [<ffffffff802a05e1>] vfs_ioctl+0x31/0x90
May 11 10:59:48 [kernel] [ 2494.166274]  [<ffffffff802a06b3>] do_vfs_ioctl+0x73/0x2d0
May 11 10:59:48 [kernel] [ 2494.166280]  [<ffffffff802a095a>] sys_ioctl+0x4a/0x80
May 11 10:59:48 [kernel] [ 2494.166286]  [<ffffffff8020b5ab>] system_call_after_swapgs+0x7b/0x80
May 11 10:59:48 [kernel] [ 2494.166292]

Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove blkdev warning triggered by using md

As setting and clearing queue flags now requires that we hold a spinlock
on the queue, and as blk_queue_stack_limits is called without that lock,
get the lock inside blk_queue_stack_limits.

For blk_queue_stack_limits to be able to find the right lock, each md
personality needs to set q->queue_lock to point to the appropriate lock.
Those personalities which didn't previously use a spin_lock, us
q->__queue_lock.  So always initialise that lock when allocated.

With this in place, setting/clearing of the QUEUE_FLAG_PLUGGED bit will no
longer cause warnings as it will be clear that the proper lock is held.

Thanks to Dan Williams for review and fixing the silly bugs.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Alistair John Strachan <alistair@devzero.co.uk>
Cc: Nick Piggin <npiggin@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jacek Luczak <difrost.kernel@gmail.com>
Cc: Prakash Punnoor <prakash@punnoor.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: select fw_loader by moxa

Select FW_LOADER since moxa needs it, otherwise we face link problems such
as:

drivers/built-in.o: In function
moxa_pci_probe':moxa.c:(.devinit.text+0x76d8): undefined reference to
request_firmware'
:moxa.c:(.devinit.text+0x7e6e): undefined reference to release_firmware'
make: *** [.tmp_vmlinux1] Error 1

Reported-by: Philippe Roussel <p.o.roussel@free.fr>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory_hotplug: always initialize pageblock bitmap

Trying to online a new memory section that was added via memory hotplug
sometimes results in crashes when the new pages are added via __free_page.
 Reason for that is that the pageblock bitmap isn't initialized and hence
contains random stuff.  That means that get_pageblock_migratetype()
returns also random stuff and therefore

list_add(&page->lru,
&zone->free_area[order].free_list[migratetype]);

in __free_one_page() tries to do a list_add to something that isn't even
necessarily a list.

This happens since 86051ca5eaf5e560113ec7673462804c54284456 ("mm: fix
usemap initialization") which makes sure that the pageblock bitmap gets
only initialized for pages present in a zone.  Unfortunately for hot-added
memory the zones "grow" after the memmap and the pageblock memmap have
been initialized.  Which means that the new pages have an unitialized
bitmap.  To solve this the calls to grow_zone_span() and grow_pgdat_span()
are moved to __add_zone() just before the initialization happens.

The patch also moves the two functions since __add_zone() is the only
caller and I didn't want to add a forward declaration.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mprotect: prevent alteration of the PAT bits

There is a defect in mprotect, which lets the user change the page cache
type bits by-passing the kernel reserve_memtype and free_memtype
wrappers.  Fix the problem by not letting mprotect change the PAT bits.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

per_cpu: fix DEFINE_PER_CPU_SHARED_ALIGNED for modules

Current module loader lookups ".data.percpu" ELF section to perform
per_cpu relocation.  But DEFINE_PER_CPU_SHARED_ALIGNED() uses another
section (".data.percpu.shared_aligned"), currently only handled in
vmlinux.lds, not by module loader.

To correct this problem, instead of adding logic into module loader, or
using at build time a module.lds file for all arches to group
".data.percpu.shared_aligned" into ".data.percpu", just use ".data.percpu"
for modules.

Alignment requirements are correctly handled by ld and module loader.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory_hotplug: check for walk_memory_resource() failure in online_pages()

Add a check to online_pages() to test for failure of
walk_memory_resource().  This fixes a condition where a failure
of walk_memory_resource() can lead to online_pages() returning
success without the requested pages being onlined.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: create common ascii hex array

Add a common hex array in hexdump.c so everyone can use it.

Add a common hi/lo helper to avoid the shifting masking that is
done to get the upper and lower nibbles of a byte value.

Pull the pack_hex_byte helper from kgdb as it is opencoded many
places in the tree that will be consolidated.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

video/logo: add support for Blackfin/Linux logo for framebuffer console

This art design is beautiful, isn't it?  And you can watch our demo on
YouTube: http://youtube.com/watch?v=fKyQOntPEFs

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext3/4: fix uninitialized bs in ext3/4_xattr_set_handle()

This fix the uninitialized bs when we try to replace a xattr entry in
ibody with the new value which require more than free space.

This situation only happens we format ext3/4 with inode size more than 128 and
we have put xattr entries both in ibody and block.  The consequences about
this bug is we will lost the xattr block which pointed by i_file_acl with all
xattr entires in it.  We will alloc a new xattr block and put that large value
entry in it.  The old xattr block will become orphan block.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: fix compile warning

Return type of cpu_rt_runtime_write() should be int instead of ssize_t.

Signed-off-by: Mirco Tischler <mt-ml@gmx.de>
Acked-by: Paul Menage <menage@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-{alpha,h8300,um,v850,xtensa}/param.h: unbreak HZ for userspace

I noticed this because alpha was broken due to the recent commit commit
bdc807871d58285737d50dc6163d0feb72cb0dc2 ("avoid overflows in
kernel/time.c").  Most arches do something like this in their
asm/param.h:

#ifdef __KERNEL__
# define HZ CONFIG_HZ
#else
# define HZ 100
#endif

A few arches though (namely alpha/h8300/um/v850/xtensa) either do no set
HZ at all for !__KERNEL__, or they set it wrongly.  This should bring all
arches in line by setting up HZ for userspace.

Without this currently perl 5.10 doesn't build on alpha:

perl.c: In function 'perl_construct':
perl.c:388: error: 'CONFIG_HZ' undeclared (first use in this function)
-> http://buildd.debian.org/fetch.cgi?pkg=perl;ver=5.10.0-10;arch=alpha;stamp=1210252894

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ HZ on alpha is 1024 for historical reasons.  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

jbd: need to hold j_state_lock to updates to transaction t_state to T_COMMIT

Updating the current transaction's t_state is protected by j_state_lock.  We
need to do the same when updating the t_state to T_COMMIT.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory hotplug: memmap_init_zone called twice

__add_zone calls memmap_init_zone twice if memory gets attached to an empty
zone.  Once via init_currently_empty_zone and once explictly right after that
call.

Looks like this is currently not a bug, however the call is superfluous and
might lead to subtle bugs if memmap_init_zone gets changed.  So make sure it
is called only once.

Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipmi: support I/O resources in OF driver

The current OF probing assumes that the resource is IORESOURCE_MEM.  This
checks for the IORESOURCE_IO flag and behaves appropriately.  An I/O resource
can exist with an ipmi device node on a legacy ISA bus.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_lcdfb: fix initialization of a pre-allocated framebuffer

Fix initialization of framebuffer not calling ioremap_writecombine() function
and not using internal SRAM for at91sam9rl.

This is a little rework of the "Don't initialize a pre-allocated framebuffer"
patch that corrects the call to ioremap_writecombine() function.

It also cuts the use of internal SRAM for at91sam9rl : it is a bit small
for a framebuffer.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix infinite loop in filemap_fault

filemap_fault will go into an infinite loop if ->readpage() fails
asynchronously.

AFAICS the bug was introduced by this commit, which removed the wait after the
final readpage:

   commit d00806b183152af6d24f46f0c33f14162ca1262a
   Author: Nick Piggin <npiggin@suse.de>
   Date:   Thu Jul 19 01:46:57 2007 -0700

       mm: fix fault vs invalidate race for linear mappings

Fix by reintroducing the wait_on_page_locked() after ->readpage() to make sure
the page is up-to-date before jumping back to the beginning of the function.

I've noticed this while testing nfs exporting on fuse.  The patch
fixes it.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnp: add ISAPnP MPU option quirks

The AD181x and AZT230 chips don't support an IRQ-less MPU401 option but
work fine without one.  This adds (priority functional) IRQ-less options
for each port option to help systems with few available IRQs.

The AD1815 quirk can't use pnp_register_irq_resource() due to doubly
penalizing the IRQ.  Also, while not a practical issue due to no IRQ
option being present for the dependents, this needs to add in front, not
back.

Doesn't use pnp_register_port_resource() for symetry with above.

This does not delete the AD1815 independent option even though it should
be empty after the IRQ transfer due to AD1816 coming with an empty but
still present independent option by default.

Was tested on AD1815, AD1816 and AZT2320.  The ALSA snd-ad1818a driver
also support the AZT2002 ID for MPU401 but this doesn't as I was unable to
test it.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Len Brown <len.brown@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnp: add pnp_build_option() to the API

The subsequent AD181x quirk patch would like this as part of the API.
pnp_register_dependent_option() adds to the same dependent chain the quirk is
walking which is fairly unclean.  This enables a private option chain build
which it can then just add onto the end when done.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Len Brown <len.brown@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnp: clean up pnp_fixup_device()

Make it look a bit more like pci_fixup_device/pci_do_fixups.  Also print
the PnP ID and delete the () from the "foo+0x0/0x1234()".

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Len Brown <len.brown@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix "lxfb: extend PLL table to support dotclocks below 25 MHz"

The following patch caused a regression with OLPC panels:

 commit 3888d4639e78802c4ec1086127124e890461b9e4
    lxfb: extend PLL table to support dotclocks below 25 MHz

    Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to
    make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25
    MHz.  These are needed for small LCDs (e.g.  320x240).  Also inserts some
    intermediate steps between pre-existing frequencies.

The problem was the insertion of intermediate steps into the frequency
table; they would cause the wrong frequency to be matched.  This patch
drops those intermediate frequencies while keeping the sub-25MHz
frequencies.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jens Rottmann <JRottmann@LiPPERT-AT.de>
Tested-by: Andres Salomon <dilinger@debian.org>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oprofile: don't request cache line alignment for cpu_buffer

Alignment was previously requested because cpu_buffer was an [NR_CPUS]
array, to avoid cache line sharing between CPUS.

After commit 608dfddd845da5ab6accef70154c8910529699f7 (oprofile: change
cpu_buffer from array to per_cpu variable ), we dont need to force an
alignement anymore since cpu_buffer sits in per_cpu zone.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: add info about removing mcfserial

Schedule a removal for this driver. Alternative driver is available for
a while now.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mpc5200_psc_spi: typo fix in header block

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: fix error path during early mount

There was some cleanup issues during early mount which would trigger
a kernel bug for certain types of failure.  This patch reorganizes the
cleanup to get rid of the bad behavior.

This also merges the 9pnet and 9pnet_fd modules for the purpose of
configuration and initialization.  Keeping the fd transport separate
from the core 9pnet code seemed like a good idea at the time, but in
practice has caused more harm and confusion than good.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: make cryptic unknown error from server less scary

Right now when we get an error string from the server that we can't
map we report a cryptic error that actually makes it look like we are
reporting a problem with the client.  This changes the text of the log
message to clarify where the error is coming from.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: fix flags length in net

Some files in the net/9p directory uses "int" for flags. This can
cause hard to find bugs on some architectures. This patch converts the
flags to use "long" instead.

This bug was discovered by doing an allyesconfig make on the -rt kernel
where checks are done to ensure all flags are of size sizeof(long).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Correct fidpool creation failure in p9_client_create

On error, p9_idpool_create returns an ERR_PTR-encoded errno.

Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: use struct mutex instead of struct semaphore

Replace semaphores protecting use flags with a mutex.

Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: propagate parse_option changes to client and transports

Propagate changes that were made to the parse_options code to the
other parse options pieces present in the other modules.  Looks like
the client parse options was probably corrupting the parse string
and causing problems for others.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p/v9fs.c (v9fs_parse_options): Handle kstrdup and match_strdup failure. Now that this function can fail, return an int, diagnose other option-parsing failures, and adjust the sole caller: (v9fs_session_init): Handle kstrdup failure. Propagate any new v9fs_parse_options failure "up".

Signed-off-by: Jim Meyering <meyering@redhat.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Documentation updates

The kernel-doc comments of much of the 9p system have been in disarray since
reorganization.  This patch fixes those problems, adds additional documentation
and a template book which collects the 9p information.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

add match_strlcpy() us it to make v9fs make uname and remotename parsing more robust

match_strcpy() is a somewhat creepy function: the caller needs to make sure
that the destination buffer is big enough, and when he screws up or
forgets, match_strcpy() happily overruns the buffer.

There's exactly one customer: v9fs_parse_options().  I believe it currently
can't overflow its buffer, but that's not exactly obvious.

The source string is a substing of the mount options.  The kernel silently
truncates those to PAGE_SIZE bytes, including the terminating zero.  See
compat_sys_mount() and do_mount().

The destination buffer is obtained from __getname(), which allocates from
name_cachep, which is initialized by vfs_caches_init() for size PATH_MAX.

We're safe as long as PATH_MAX <= PAGE_SIZE.  PATH_MAX is 4096.  As far as
I know, the smallest PAGE_SIZE is also 4096.

Here's a patch that makes the code a bit more obviously correct.  It
doesn't depend on PATH_MAX <= PAGE_SIZE.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Jim Meyering <meyering@redhat.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  cs5520: disable VDMA
  ide/Kconfig: couple of fixes
  alim15x3: remove WDC_ALI15X3 config option
  alim15x3: add "wdc_udma" module parameter
  alim15x3: remove stale warning about ATI RS100 northbridge
  alim15x3: trivial cleanup for ali_set_pio_mode()
  make ide-iops.c:SELECT_MASK() static
  SWARM IDE: Fix up following changes to ide_hwif_t

cs5520: disable VDMA

Disable Virtual DMA support for now (it causes system hangs).

Thanks to TAKADA Yoshihito for the help with debugging the problem.

Reported-by: TAKADA Yoshihito <takada@mbf.nifty.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>