arm64: dts: qcom: sm8250: Add videocc DT node

This commit adds the videocc DTS node for sm8250.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210401174256.1810044-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add interconnects

Add interconnect nodes and add them for modem and cdsp nodes

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210401113252.3078466-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add support for PRNG EE

RNG (Random Number Generator) in SM8350 features PRNG EE (Execution
Environment), hence add devicetree support for it.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210401101536.1014560-1-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp

Add regulator devices for SC7280 as RPMh regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1617192339-3760-4-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845: add required clocks on the gcc

Specify input clocks to the SDM845's Global Clock Controller as required
by the bindings.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210402233944.273275-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add thermal zones and throttling support

sm8350 has 29 thermal sensors split across two tsens controllers. Add
the thermal zones to expose them and wireup the cpus to throttle their
frequencies on crossing passive temperature thresholds.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210324124308.1265626-2-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: add i2c nodes

Tested on the OnePlus 7 Pro (including DMA).

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210321174522.123036-3-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: add other QUP nodes and iommus

Add the first and third qupv3 nodes used to hook
up peripherals on some devices, as well as the iommus properties for all
of them.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210321174522.123036-2-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: fix display nodes

Apply these fixes to the newly added sm8250 display ndoes
 - Remove "notused" interconnect (which apparently was blindly copied from
   my old patches)
 - Use dispcc node example from dt-bindings, removing clocks which aren't
   documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[DB: compatibility changes split into separate patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210329120051.3401567-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS

On the GENI SPI controller is is not very efficient if the chip select
line is controlled by the QUP itself (see 37dd4b777942 ("arm64: dts:
qcom: sc7180: Provide pinconf for SPI to use GPIO for CS") for the
details). Configure SPI0 CS pin as a GPIO.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210210133458.1201066-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS

GENI SPI controller shows several issues if it manages the CS on its own
(see 37dd4b777942 ("arm64: dts: qcom: sc7180: Provide pinconf for SPI to
use GPIO for CS")) for the details. Provide pinctrl entries for SPI
controllers using the same CS pin but in GPIO mode.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210210133458.1201066-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: further split of spi pinctrl config

Split "default" device tree nodes into common "data-clk" nodes and "cs"
nodes which might differ from board to board depending on how the slave
chips are wired.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210210133458.1201066-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: split spi pinctrl config

As discussed on linux-arm-msm list, start splitting sm8250 pinctrl
settings into generic and board-specific parts. The first part to
receive such treatment is the spi, so split spi pinconf to the board
device tree.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210210133458.1201066-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845-db845c: Enable ov8856 sensor and connect to ISP

Enable camss & ov8856 DT nodes.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Link: https://lore.kernel.org/r/20210316171931.812748-23-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845-db845c: Configure regulators for camss node

Add regulator to camss device tree node.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Link: https://lore.kernel.org/r/20210316171931.812748-22-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845: Add CAMSS ISP node

Add the camss dt node for sdm845.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Link: https://lore.kernel.org/r/20210316171931.812748-21-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm8150: Enable RTC

The PM8150 comes with everything the RTC needs, so let's just leave it
enabled instead of having to explicitly enable it for all boards.
In effect this patch enables the RTC on the SM8150 MTP and the SM8250
HDK.

Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210106001004.4081508-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350-mtp: Add PMICs

SM8350-MTP features PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B. PMICs Add the dtsi for these PMICs to MTP.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-9-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pmr735B: Add base dts file

Add base DTS file for PMR735B along with GPIO node

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-8-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pmr735a: Add base dts file

Add base DTS file for PMR735A along with GPIO node

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm8350c: Add base dts file

Add base DTS file for PM8350C along with GPIO node

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-6-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm8350b: Add base dts file

Add base DTS file for PM8350B along with GPIO node

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-5-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm8350: Add base dts file

Add base DTS file for PM8350 along with GPIO node

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pmk8350: Add base dts file

Add base DTS file for PMK8350 along with GPIO node

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add spmi node

Add SPMI node found in SM8350 SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312052737.3558801-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x

WSA881x powerdown pin is connected to GPIO1 not gpio2, so correct this.
This was working so far due to a shift bug in gpio driver, however
once that is fixed this will stop working, so fix this!

Fixes: 89a32a4e769cc ("arm64: dts: qcom: db845c: add analog audio support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309102025.28405-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: Add SM8350 HDK

Document the SM8350 Hardware Development Kit (HDK).

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reported-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210310035710.2816699-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Drop duplicate dp_hot_plug_det node in trogdor

This moved from being trogdor specific to being part of the general
sc7180.dtsi SoC file in commit 681a607ad21a ("arm64: dts: qcom:
sc7180: Add DisplayPort HPD pin dt node"). Then we dropped the pinconf
from the general sc7180.dtsi file in commit 8d079bf20410 ("arm64: dts:
qcom: sc7180: Drop pinconf on dp_hot_plug_det") and added it back to
the trogdor dts file in commit f772081f4883 ("arm64: dts: qcom:
sc7180: Add "dp_hot_plug_det" pinconf for trogdor").

As part of this we managed to forget to drop the old copy in the
trogdor dts. Let's do it now.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[dianders: updated desc]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210311131008.1.I85fc8146c0ee47e261faa0c54dd621467b81952d@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: fix number of pins in 'gpio-ranges'

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-5-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: fix number of pins in 'gpio-ranges'

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: 16951b490b20 ("arm64: dts: qcom: sm8250: Add TLMM pinctrl node")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-4-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: fix number of pins in 'gpio-ranges'

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: e13c6d144fa0 ("arm64: dts: qcom: sm8150: Add base dts file")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-3-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845: fix number of pins in 'gpio-ranges'

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: bc2c806293c6 ("arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node")
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-2-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add rpmh power-domain node

Add the DT node for the rpmhpd power controller on SC7280 SoCs.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1615461961-17716-15-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add cpuidle states

Add cpuidle states for little and big cpus.
The latency values are preliminary placeholders and will be updated
once testing provides the real numbers.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1615461961-17716-14-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add SPMI PMIC arbiter device for SC7280

Add SPMI PMIC arbiter device to communicate with PMICs
attached to SPMI bus.

Signed-off-by: satya priya <skakit@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1615461961-17716-13-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add APSS watchdog node

Add APSS (Application Processor Subsystem) watchdog
DT node for SC7280 SoC.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1615461961-17716-12-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add reserved memory for fw

Add fw reserved memory area for CPUCP (CPUSS control
processor) and AOP (Always ON processor)

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1615461961-17716-10-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add device node for APPS SMMU

Adding device node for APPS SMMU available on SC7280 chipset.
This is shared among the multiple client devices such as
display, video, usb, mmc and others.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1615461961-17716-9-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: SC7280: Add rpmhcc clock controller node

Add rpmhcc clock controller node for SC7280. Also add references to
rpmhcc clocks in gcc.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1615461961-17716-7-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add RSC and PDC devices

Add PDC interrupt controller along with apps RSC device.
Also add reserved memory for command_db.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1615461961-17716-6-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add basic dts/dtsi files for sc7280 soc

Add initial device tree support for the sc7280 SoC and the IDP
boards based on this SoC

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1615461961-17716-4-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: Document sc7280 SoC and board

Document the sc7280 SoC and the IDP board bindings

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1615461961-17716-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Introduce SM8350 HDK

Add initial DTS for the Snapdragon 888 Mobile Hardware Development Kit,
aka SM8350 HDK. This initial version describes debug UART, UFS storage,
the three USB connectors and remoteprocs.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210308182113.1284966-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: Document sony boards for apq8094

Document the various sony boards for apq8094. These are used in various
sony dts files but not documented

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-6-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8994: don't use empty memory node

We expect bootloader to full memory details but passing empty values
gives warning, so add a default value

arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dt.yaml: /: memory:
False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0, 0, 0]]}

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-5-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: Document ipq6018-cp01 board

Document the ipq6018-cp01 board. It was missing leading to warning:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
        ['qcom,ipq6018-cp01', 'qcom,ipq6018'] is too short
        ['qcom,ipq6018-cp01', 'qcom,ipq6018'] is too long
        Additional items are not allowed ('qcom,ipq6018' was unexpected)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8916: don't use empty memory node

We expect bootloader to full memory details but passing empty values
gives warning, so add a default value

arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: /: memory:
False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0, 0, 0]]}

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: apq8016-sbc: drop qcom,sbc

apq8016-sbc is one of the compaitibles for this board, but is not
documented, so drop it. This fixes these two warns:

arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: /: compatible: ['qcom,apq8016-sbc', 'qcom,apq8016', 'qcom,sbc']
is not valid under any of the given schemas (Possible causes of the failure):

arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: /: compatible: ['qcom,apq8016-sbc', 'qcom,apq8016', 'qcom,sbc'] is too long
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: /: compatible:0: 'qcom,apq8016-sbc'
is not one of ['qcom,apq8064-cm-qs600', 'qcom,apq8064-ifc6410']
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: /: compatible:0: 'qcom,apq8016-sbc'
is not one of ['qcom,apq8074-dragonboard']

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor

At boot time the following happens:
1. Device core gets ready to probe our SPI driver.
2. Device core applies SPI controller's "default" pinctrl.
3. Device core calls the SPI driver's probe() function which will
   eventually setup the chip select GPIO as "unasserted".

Thinking about the above, we can find:
a) For SPI devices that the BIOS inits (Cr50 and EC), the BIOS would
   have had them configured as "GENI" pins and not as "GPIO" pins.
b) It turns out that our BIOS also happens to init these pins as
   "output" (even though it doesn't need to since they're not muxed as
   GPIO) but leaves them at the default state of "low".
c) As soon as we apply the "default" chip select it'll switch the
   function to GPIO and stop driving the chip select high (which is
   how "GENI" was driving it) and start driving it low.
d) As of commit 9378f46040be ("UPSTREAM: spi: spi-geni-qcom: Use the
   new method of gpio CS control"), when the SPI core inits things it
   inits the GPIO to be "deasserted".  Prior to that commit the GPIO
   was left untouched until first use.
e) When the first transaction happens we'll assert the chip select and
   then deassert it after done.

So before the commit to change us to use gpio descriptors we used to
have a _really long_ assertion of chip select before our first
transaction (because it got pulled down and then the first "assert"
was a no-op).  That wasn't great but (apparently) didn't cause any
real harm.

After the commit to change us to use gpio descriptors we end up
glitching the chip select line during probe.  It would go low and then
high with no data transferred.  The other side ought to be robust
against this, but it certainly could cause some confusion.  It's known
to at least cause an error message on the EC console and it's believed
that, under certain timing conditions, it could be getting the EC into
a confused state causing the EC driver to fail to probe.

Let's fix things to avoid the glitch.  We'll add an extra pinctrl
entry that sets the value of the pin to output high (CS deasserted)
before doing anything else.  We'll do this in its own pinctrl node
that comes before the normal pinctrl entries to ensure that the order
is correct and that this gets applied before the mux change.

This change is in the trogdor board file rather than in the SoC dtsi
file because chip select polarity can be different depending on what's
hooked up and it doesn't feel worth it to spam the SoC dtsi file with
both options.  The board file would need to pick the right one anyway.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: cfbb97fde694 ("arm64: dts: qcom: Switch sc7180-trogdor to control SPI CS via GPIO")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210218145456.1.I1da01a075dd86e005152f993b2d5d82dd9686238@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts

Using pdc interrupts for USB instead of GIC interrupts to
support wake up in case xo shutdown.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Link: https://lore.kernel.org/r/1594235417-23066-4-git-send-email-sanm@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add sc7180-trogdor-coachz skus

This is a trogdor variant.  This is mostly a grab from the downstream
tree with notable exceptions:
- I skip -rev0.  This was a super early build and there's no advantage
  of long term support.
- I remove sound node since sound hasn't landed upstream yet.

Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.13.I3d1f5f8a3bf31e8014229df0d4cfdff20e9cc90f@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add sc7180-trogdor-pompom skus

This is a trogdor variant.  This is mostly a grab from the downstream
tree with notable exceptions:
- I skip -rev0.  This was a super early build and there's no advantage
  of long term support.
- In -rev1 I translate the handling of the USB hub like is done for
  similar boards.  See the difference between the downstream and
  upstream 'sc7180-trogdor-lazor-r0.dts' for an example.  This will
  need to be resolved when proper support for the USB hub is figured
  out upstream.
- I remove sound node since sound hasn't landed upstream yet.
- In incorporate the pending <https://crrev.com/c/2719075> for the
  keyboard.

Cc: Philip Chen <philipchen@google.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.12.If93a01b30d20dccacbad4be8ddc519dc20a51a1e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add sc7180-lazor-limozeen skus

This is a SKU variant of lazor.  Add it.  This squashes the downstream
patches to support this hardware.

NOTES:
- The non-touch SKU actually has "innolux,n116bca-ea1" but that driver
  is still pending in simple-panel.  The bindings have been Acked
  though [1].  Things work well enough with the "innolux,n116bge"
  timings for now, though.
- The wonky special dts just for "-rev4" arguably doesn't need to go
  upstream since they weren't widely distributed, but since a few
  people have them we might as well.  If it ever causes problems we
  can delete it.

[1] https://lore.kernel.org/r/20210115144345.v2.4.I6889e21811df6adaff5c5b8a8c80fda0669ab3a5@changeid

Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.11.I556326b24441e22c8c429ce383cc157c7aaef44b@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs

Lazor rev3 and later use the 'lite' version of the SC7180 SoC.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[dianders: Adjust commit message which referred to downstream history]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.10.Ia3795e192f5bbe17e6714e45fcb0bf5acdbd4c17@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: add GO_LAZOR variant property for lazor

For trogdor, in the latest board-2.bin file, new BDF with variant
name GO_LAZOR has been introduced, so we need this property set, for
GO_LAZOR BDF to be picked.

Cc: Philip Chen <philipchen@chromium.org>
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
[dianders: adjusted subject line and sort order]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.9.I4a38fe64dd79c54af80d7e4ef5940f8cf4f86e75@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Remove clock for bluetooth on Trogdor

Removed voting for RPMH_RF_CLK2 which is not required as it is
getting managed by BT SoC through SW_CTRL line.

Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.8.I80c268f163e6d49a70af1238be442b5de400c579@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180-trogdor: Remove fp control pins in prep for coachz

Removed the pinctrl and pin{mux,conf} for the control pins because:
1. The only need for them is for userspace control via flash_fp_mcu
2. cros-ec doesn't know what to do with them, and even if it did,
   it would interfere with flash_fp_mcu at the most inopportune times

Since we're not using hogs, we rely on AP firmware to set all the
control pins correctly.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Craig Hesling <hesling@chromium.org>
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
[dianders: adjusted since coachz isn't upstream yet]
Reviewed-by; Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.7.Ifd7b86f826b18410eada75758a7bca1eebfa336d@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Disable camera clk on sc7180-trogdor devices by default

We only want to use this clk driver on CoachZ devices. Disable it for
all other Trogdor boards.  NOTE: CoachZ devices aren't yet supported
upstream so until it is this is just disabled for all trogdor.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[dianders:adjusted since no coachz upstream yet]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.6.I22522b0c9db505ee43ed08e8d5d9e8fe632e7447@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: trogdor: Only wakeup from pen eject

Configure the pen to be a wakeup source only when the pen is ejected
instead of both when the pen is ejected and inserted. This corresponds
to wake source requirements.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.5.Ib9672bfbe639c96c85408d6f0217a2609eb0b70f@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Unify the sc7180-trogdor panel nodes

Let's avoid a bit of duplication by pushing this up to the trogdor.dtsi
file.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.4.I1483fac4c5ae4b2d7660290ff85d69945292618f@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards

The trackpad interrupt got renamed and also moved to a new GPIO on
newer boards.  Let's do the move in the "trogdor.dtsi" file and then
undo it in the two old boards.

NOTE: since none of the new boards have device trees yet, this change
looks silly on its own but it will make sense after more boards are
supported.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.3.Iddf6dc8102aa4fbc3847936226fc7bf2e2cd315c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Move sc7180 MI2S config to board files and make pulldown

In general pinconf belongs in board files, not SoC files.  Move it to
the only current user (trogdor).  Also adjust the drive strengths and
pulls.

Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.2.Id27e7e6f90c29bf623fa4880e18a14ba1dffd2d2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy

Drop the old node and add the new one in its place.

Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[dianders: Adjusted due to DP not itself not in upstream dts yet]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.1.Iad06142ceb8426ce5492737bf3d9162ed0dd2b55@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add cpufreq node

Add cpufreq node and reference it for the CPUs.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210216111703.1838663-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Use enums for GCC

Now that we have GCC define, use the enums instead of numbers in the DTS

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-8-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350-mtp: Enable remoteprocs

This enabled the four remoteprocs found in SM8350, audio, compute, modem
and sensor for MTP platform and adds firmware for them.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add remoteprocs

Add remoteproc nodes for the audio, compute and sensor cores, define
glink for each one.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-6-vkoul@kernel.org
[bjorn: Replaced rpmhpd defines with constants, for now]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add SMP2P nodes

SMP2P is used for interrupting and being interrupted about remoteproc
state changes related to the audio, compute, modem and sensor subsystems.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-5-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add rmtfs node

Add the rmtfs as a reserved memory node.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add rpmhpd node

This adds RPMH power domain found in SM8350 SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: fix typo

Fix the typo s/Limaited/Limited

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210212115532.1339942-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350-mtp: add regulator names

Add the property "regulator-names" to the regulators as given in
schematics so that it is easier to understand the regulators being used

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350-mtp: enable UFS nodes

Enabled the UFS node found in SM8350-MTP platform, also add the
regulators associated with UFS HC and UFS phy to these nodes.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-6-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add UFS nodes

This adds UFS HC and UFS phy nodes to the SM8350 DTS

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-5-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350-mtp: enable USB nodes

Enable both USB controllers and associated hsphy and qmp phy nodes
on sm8350 MTP. Designate the usb_1 instance as peripheral-mode only
until proper PMIC based Type-C dual-role handling is supported.

TODO: the second USB controller is exposed to a microAB port. Dual-
role can be supported for this by adding the "usb-role-switch"
property as well as defining a USB connector node with a
"gpio-usb-b-connector" compatible. However, this requires GPIO
support from PM8350 which is still missing.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210116013802.1609-3-jackp@codeaurora.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: add USB and PHY device nodes

Add device nodes for the two instances each of USB3 controllers,
QMP SS PHYs and SNPS HS PHYs.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210116013802.1609-2-jackp@codeaurora.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Add apss_smmu node

This adds apss_smmu node to SM8350 DTS

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210204170907.63545-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer

ARM architected timer interrupts DT property specifies EL2/HYP
physical interrupt and not EL2/HYP virtual interrupt for the 4th
interrupt property. As per interrupt documentation for SM8250 SoC,
the EL2/HYP physical timer interrupt is 10 and EL2/HYP virtual timer
interrupt is 12, so fix the 4th timer interrupt to be EL2 physical
timer interrupt (10 in this case).

Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/744e58f725d279eb2b049a7da42b0f09189f4054.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Fix level triggered PMU interrupt polarity

As per interrupt documentation for SM8350 SoC, the polarity
for level triggered PMU interrupt is low, fix this.

Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/ca57409198477f7815e32a6a7467dcdc9b93dc4f.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity

As per interrupt documentation for SM8250 SoC, the polarity
for level triggered PMU interrupt is low, fix this.

Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/96680a1c6488955c9eef7973c28026462b2a4ec0.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8350: Rename the qmp node to power-controller

Use the generic DT node name "power-controller" for AOSS message ram
instead of the protocol name QMP(Qualcomm Messaging Protocol) since
it is used for power management requests.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/15005f1441594670adcd60a300c88e41d79cad27.1614669585.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: Rename the qmp node to power-controller

Use the generic DT node name "power-controller" for AOSS message ram
instead of the protocol name QMP(Qualcomm Messaging Protocol) since
it is used for power management requests.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/044fe2e590e166060de65f074df6874ec3a79531.1614669585.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845: Rename the qmp node to power-controller

Use the generic DT node name "power-controller" for AOSS message ram
instead of the protocol name QMP(Qualcomm Messaging Protocol) since
it is used for power management requests.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/55416e116dda4aad977bb050451d328b1f6b00d3.1614669585.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Rename the qmp node to power-controller

Use the generic DT node name "power-controller" for AOSS message ram
instead of the protocol name QMP(Qualcomm Messaging Protocol) since
it is used for power management requests.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/e96d665d1e98b46a189a57e39575ae0debf37172.1614669585.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: trogdor: Use ADC TM channel 0 instead of 1 for charger temperature

On trogdor the ADC thermal monitor is used for monitoring certain
device temperatures. All trogdor boards have at least a thermistor
for the charger temperature, optionally they may have others.

Currently the ADC thermal monitor is configured to use channel 1
for the charger temperature. Given that all trogdor boards have
the charger thermistor it makes more sense to use channel 0,
and then let boards with other thermistors use channels 1, 2, 3,
rather than 0, 2, 3.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210225103330.v2.4.I67e29f2854bad22e3581d6a6e1879b9fc8abbdea@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: trogdor: Fix trip point config of charger thermal zone

The trip point configuration of the charger thermal zone for trogdor
is missing a node for the critical trip point. Add the missing node.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: bb06eb3607e9 ("arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210225103330.v2.3.Ife7768b6b4765026c9d233ad4982da0e365ddbca@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor

Lazor is stuffed with a 47k NTC as thermistor for the charger
temperature which currently isn't supported by the PM6150 ADC
driver. Disable the charger thermal zone to avoid the use of
bogus temperature values.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210225103330.v2.2.Ia4c1022191d09fe8c56a16486b77796b83ffcae4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: trogdor: Add label to charger thermal zone

Some revisions of trogdor boards use a thermistor for the charger
temperature which currently isn't supported by the PM6150 ADC
driver. This results in bogus temperature readings. Add a label
to the charger thermal zone to facilitate disabling of the thermal
zone on affected boards.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210225103330.v2.1.I6a426324db3d98d6cfae8adf2598831bb30bba74@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Linux 5.12-rc2

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

Merge tag 'gcc-plugins-v5.12-rc2' of git://git./linux/kernel/git/kees/linux

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'

Merge tag 'pstore-v5.12-rc2' of git://git./linux/kernel/git/kees/linux

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()

Merge tag 'for-5.12/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix DM verity target's optional Forward Error Correction (FEC) for
  Reed-Solomon roots that are unaligned to block size"

* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: fix FEC for RS roots unaligned to block size
  dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size

Merge tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe fixes:
      - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
        Terjan)
      - fix a hwmon error return (Daniel Wagner)
      - fix the keep alive timeout initialization (Martin George)
      - ensure the model_number can't be changed on a used subsystem
        (Max Gurtovoy)

 - rsxx missing -EFAULT on copy_to_user() failure (Dan)

 - rsxx remove unused linux.h include (Tian)

 - kill unused RQF_SORTED (Jean)

 - updated outdated BFQ comments (Joseph)

 - revert work-around commit for bd_size_lock, since we removed the
   offending user in this merge window (Damien)

* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
  rsxx: Return -EFAULT if copy_to_user() fails
  block/bfq: update comments and default value in docs for fifo_expire
  rsxx: remove unused including <linux/version.h>
  block: Drop leftover references to RQF_SORTED
  block: revert "block: fix bd_size_lock use"

Merge tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "A bit of a mix between fallout from the worker change, cleanups and
  reductions now possible from that change, and fixes in general. In
  detail:

   - Fully serialize manager and worker creation, fixing races due to
     that.

   - Clean up some naming that had gone stale.

   - SQPOLL fixes.

   - Fix race condition around task_work rework that went into this
     merge window.

   - Implement unshare. Used for when the original task does unshare(2)
     or setuid/seteuid and friends, drops the original workers and forks
     new ones.

   - Drop the only remaining piece of state shuffling we had left, which
     was cred. Move it into issue instead, and we can drop all of that
     code too.

   - Kill f_op->flush() usage. That was such a nasty hack that we had
     out of necessity, we no longer need it.

   - Following from ->flush() removal, we can also drop various bits of
     ctx state related to SQPOLL and cancelations.

   - Fix an issue with IOPOLL retry, which originally was fallout from a
     filemap change (removing iov_iter_revert()), but uncovered an issue
     with iovec re-import too late.

   - Fix an issue with system suspend.

   - Use xchg() for fallback work, instead of cmpxchg().

   - Properly destroy io-wq on exec.

   - Add create_io_thread() core helper, and use that in io-wq and
     io_uring. This allows us to remove various silly completion events
     related to thread setup.

   - A few error handling fixes.

  This should be the grunt of fixes necessary for the new workers, next
  week should be quieter. We've got a pending series from Pavel on
  cancelations, and how tasks and rings are indexed. Outside of that,
  should just be minor fixes. Even with these fixes, we're still killing
  a net ~80 lines"

* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
  io_uring: don't restrict issue_flags for io_openat
  io_uring: make SQPOLL thread parking saner
  io-wq: kill hashed waitqueue before manager exits
  io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
  io_uring: don't keep looping for more events if we can't flush overflow
  io_uring: move to using create_io_thread()
  kernel: provide create_io_thread() helper
  io_uring: reliably cancel linked timeouts
  io_uring: cancel-match based on flags
  io-wq: ensure all pending work is canceled on exit
  io_uring: ensure that threads freeze on suspend
  io_uring: remove extra in_idle wake up
  io_uring: inline __io_queue_async_work()
  io_uring: inline io_req_clean_work()
  io_uring: choose right tctx->io_wq for try cancel
  io_uring: fix -EAGAIN retry with IOPOLL
  io-wq: fix error path leak of buffered write hash map
  io_uring: remove sqo_task
  io_uring: kill sqo_dead and sqo submission halting
  io_uring: ignore double poll add on the same waitqueue head
  ...

Merge tag 'pm-5.12-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix the usage of device links in the runtime PM core code and
  update the DTPM (Dynamic Thermal Power Management) feature added
  recently.

  Specifics:

   - Make the runtime PM core code avoid attempting to suspend supplier
     devices before updating the PM-runtime status of a consumer to
     'suspended' (Rafael Wysocki).

   - Fix DTPM (Dynamic Thermal Power Management) root node
     initialization and label that feature as EXPERIMENTAL in Kconfig
     (Daniel Lezcano)"

* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap/drivers/dtpm: Add the experimental label to the option description
  powercap/drivers/dtpm: Fix root node initialization
  PM: runtime: Update device status before letting suppliers suspend

Merge tag 'acpi-5.12-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Make the empty stubs of some helper functions used when CONFIG_ACPI is
  not set actually match those functions (Andy Shevchenko)"

* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Constify is_acpi_node() and friends (part 2)

Merge tag 'iommu-fixes-v5.12-rc1' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - Fix a sleeping-while-atomic issue in the AMD IOMMU code

 - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d
   driver

 - Fix status code definitions for Intel VT-d

 - Fix IO Page Fault issue in Tegra IOMMU driver

* tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix status code for Allocate/Free PASID command
  iommu: Don't use lazy flush for untrusted device
  iommu/tegra-smmu: Fix mc errors on tegra124-nyan
  iommu/amd: Fix sleeping in atomic in increase_address_space()

Merge tag 'for-5.12-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "More regression fixes and stabilization.

  Regressions:

   - zoned mode
      - count zone sizes in wider int types
      - fix space accounting for read-only block groups

   - subpage: fix page tail zeroing

  Fixes:

   - fix spurious warning when remounting with free space tree

   - fix warning when creating a directory with smack enabled

   - ioctl checks for qgroup inheritance when creating a snapshot

   - qgroup
      - fix missing unlock on error path in zero range
      - fix amount of released reservation on error
      - fix flushing from unsafe context with open transaction,
        potentially deadlocking

   - minor build warning fixes"

* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: do not account freed region of read-only block group as zone_unusable
  btrfs: zoned: use sector_t for zone sectors
  btrfs: subpage: fix the false data csum mismatch error
  btrfs: fix warning when creating a directory with smack enabled
  btrfs: don't flush from btrfs_delayed_inode_reserve_metadata
  btrfs: export and rename qgroup_reserve_meta
  btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata
  btrfs: fix spurious free_space_tree remount warning
  btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl
  btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors
  btrfs: ref-verify: use 'inline void' keyword ordering

Merge tag 'devicetree-fixes-for-5.12-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Another batch of graph and video-interfaces schema conversions

 - Drop DT header symlink for dropped C6X arch

 - Fix bcm2711-hdmi schema error

* tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: media: Use graph and video-interfaces schemas, round 2
  dts: drop dangling c6x symlink
  dt-bindings: bcm2711-hdmi: Fix broken schema