rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured

[ Upstream commit d6752e185c3168771787a02dc6a55f32260943cc ]

If we encounter a failure during suspend where this RTC was programmed
to wakeup the system from suspend, but that wakeup couldn't be
configured because the system didn't support wakeup interrupts, we'll
run into the following warning:

Unbalanced IRQ 166 wake disable
WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278

This happens because the suspend process isn't aborted when the RTC
fails to configure the wakeup IRQ. Instead, we continue suspending the
system and then another suspend callback fails the suspend process and
"unwinds" the previously suspended drivers by calling their resume
callbacks. When we get back to resuming this RTC driver, we'll call
disable_irq_wake() on an IRQ that hasn't been configured for wake.

Let's just fail suspend/resume here if we can't configure the system to
wake and the user has chosen to wakeup with this device. This fixes this
warning and makes the code more robust in case there are systems out
there that can't wakeup from suspend on this line but the user has
chosen to do so.

Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Evan Green <evgreen@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-By: Benson Leung <bleung@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: debug: fix race condition with between rdesc_show() and device removal

[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]

There is a race condition that could happen if hid_debug_rdesc_show()
is running while hdev is in the process of going away (device removal,
system suspend, etc) which could result in NULL pointer dereference:

 BUG: unable to handle kernel paging request at 0000000783316040
 CPU: 1 PID: 1512 Comm: getevent Tainted: G     U     O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1
 RIP: 0010:hid_dump_device+0x9b/0x160
 Call Trace:
  hid_debug_rdesc_show+0x72/0x1d0
  seq_read+0xe0/0x410
  full_proxy_read+0x5f/0x90
  __vfs_read+0x3a/0x170
  vfs_read+0xa0/0x150
  ksys_read+0x58/0xc0
  __x64_sys_read+0x1a/0x20
  do_syscall_64+0x55/0x110
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Grab driver_input_lock to make sure the input device exists throughout the
whole process of dumping the rdesc.

[jkosina@suse.cz: update changelog a bit]
Signed-off-by: he, bo <bo.he@intel.com>
Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech: check the return value of create_singlethread_workqueue

[ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ]

create_singlethread_workqueue may fail and return NULL. The fix checks if it is
NULL to avoid NULL pointer dereference.  Also, the fix moves the call of
create_singlethread_workqueue earlier to avoid resource-release issues.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay

[ Upstream commit 924726888f660b2a86382a5dd051ec9ca1b18190 ]

The rk3328-roc-cc board exhibits tx stability issues with large packets,
as does the rock64 board, which was fixed with this patch
https://patchwork.kernel.org/patch/10178969/

A similar patch was merged for the rk3328-roc-cc here
https://patchwork.kernel.org/patch/10804863/
but it doesn't include the tx/rx_delay tweaks, and I find that they
help with an issue where large transfers would bring the ethernet
link down, causing a link reset regularly.

Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: Fix debugobjects warning on 'efi_rts_work'

[ Upstream commit ef1491e791308317bb9851a0ad380c4a68b58d54 ]

The following commit:

  9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")

converted 'efi_rts_work' from an auto variable to a global variable.
However, when submitting the work, INIT_WORK_ONSTACK() was still used,
causing the following complaint from debugobjects:

  ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated.

Change the macro to just INIT_WORK() to eliminate the warning.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")
Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-loop: init nvmet_ctrl fatal_err_work when allocate

[ Upstream commit d11de63f2b519f0a162b834013b6d3a46dbf3886 ]

After commit 4d43d395fe (workqueue: Try to catch flush_work() without
INIT_WORK()), it can cause warning when delete nvme-loop device, trace
like:

[   76.601272] Call Trace:
[   76.601646]  ? del_timer+0x72/0xa0
[   76.602156]  __cancel_work_timer+0x1ae/0x270
[   76.602791]  cancel_work_sync+0x14/0x20
[   76.603407]  nvmet_ctrl_free+0x1b7/0x2f0 [nvmet]
[   76.604091]  ? free_percpu+0x168/0x300
[   76.604652]  nvmet_sq_destroy+0x106/0x240 [nvmet]
[   76.605346]  nvme_loop_destroy_admin_queue+0x30/0x60 [nvme_loop]
[   76.606220]  nvme_loop_shutdown_ctrl+0xc3/0xf0 [nvme_loop]
[   76.607026]  nvme_loop_delete_ctrl_host+0x19/0x30 [nvme_loop]
[   76.607871]  nvme_do_delete_ctrl+0x75/0xb0
[   76.608477]  nvme_sysfs_delete+0x7d/0xc0
[   76.609057]  dev_attr_store+0x24/0x40
[   76.609603]  sysfs_kf_write+0x4c/0x60
[   76.610144]  kernfs_fop_write+0x19a/0x260
[   76.610742]  __vfs_write+0x1c/0x60
[   76.611246]  vfs_write+0xfa/0x280
[   76.611739]  ksys_write+0x6e/0x120
[   76.612238]  __x64_sys_write+0x1e/0x30
[   76.612787]  do_syscall_64+0xbf/0x3a0
[   76.613329]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

We fix it by moving fatal_err_work init to nvmet_alloc_ctrl(), which may
more reasonable.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: core: Fix bug caused by duplicate interface PM usage counter

commit c2b71462d294cf517a0bc6e4fd6424d7cee5596f upstream.

The syzkaller fuzzer reported a bug in the USB hub driver which turned
out to be caused by a negative runtime-PM usage counter.  This allowed
a hub to be runtime suspended at a time when the driver did not expect
it.  The symptom is a WARNING issued because the hub's status URB is
submitted while it is already active:

URB 0000000031fb463e submitted while active
WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363

The negative runtime-PM usage count was caused by an unfortunate
design decision made when runtime PM was first implemented for USB.
At that time, USB class drivers were allowed to unbind from their
interfaces without balancing the usage counter (i.e., leaving it with
a positive count).  The core code would take care of setting the
counter back to 0 before allowing another driver to bind to the
interface.

Later on when runtime PM was implemented for the entire kernel, the
opposite decision was made: Drivers were required to balance their
runtime-PM get and put calls.  In order to maintain backward
compatibility, however, the USB subsystem adapted to the new
implementation by keeping an independent usage counter for each
interface and using it to automatically adjust the normal usage
counter back to 0 whenever a driver was unbound.

This approach involves duplicating information, but what is worse, it
doesn't work properly in cases where a USB class driver delays
decrementing the usage counter until after the driver's disconnect()
routine has returned and the counter has been adjusted back to 0.
Doing so would cause the usage counter to become negative.  There's
even a warning about this in the USB power management documentation!

As it happens, this is exactly what the hub driver does.  The
kick_hub_wq() routine increments the runtime-PM usage counter, and the
corresponding decrement is carried out by hub_event() in the context
of the hub_wq work-queue thread.  This work routine may sometimes run
after the driver has been unbound from its interface, and when it does
it causes the usage counter to go negative.

It is not possible for hub_disconnect() to wait for a pending
hub_event() call to finish, because hub_disconnect() is called with
the device lock held and hub_event() acquires that lock.  The only
feasible fix is to reverse the original design decision: remove the
duplicate interface-specific usage counter and require USB drivers to
balance their runtime PM gets and puts.  As far as I know, all
existing drivers currently do this.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+7634edaea4d0b341c625@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Fix unterminated string returned by usb_string()

commit c01c348ecdc66085e44912c97368809612231520 upstream.

Some drivers (such as the vub300 MMC driver) expect usb_string() to
return a properly NUL-terminated string, even when an error occurs.
(In fact, vub300's probe routine doesn't bother to check the return
code from usb_string().)  When the driver goes on to use an
unterminated string, it leads to kernel errors such as
stack-out-of-bounds, as found by the syzkaller USB fuzzer.

An out-of-range string index argument is not at all unlikely, given
that some devices don't provide string descriptors and therefore list
0 as the value for their string indexes.  This patch makes
usb_string() return a properly terminated empty string along with the
-EINVAL error code when an out-of-range index is encountered.

And since a USB string index is a single-byte value, indexes >= 256
are just as invalid as values of 0 or below.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+b75b85111c10b8d680f1@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usbip: fix isoc packet num validation in get_pipe

commit c409ca3be3c6ff3a1eeb303b191184e80d412862 upstream.

Change the validation of number_of_packets in get_pipe to compare the
number of packets to a fixed maximum number of packets allowed, set to
be 1024. This number was chosen due to it being used by other drivers as
well, for example drivers/usb/host/uhci-q.c

Background/reason:
The get_pipe function in stub_rx.c validates the number of packets in
isochronous mode and aborts with an error if that number is too large,
in order to prevent malicious input from possibly triggering large
memory allocations. This was previously done by checking whether
pdu->u.cmd_submit.number_of_packets is bigger than the number of packets
that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes
if all except possibly the last packet had maximum length, given by
usb_endpoint_maxp(epd) *  usb_endpoint_maxp_mult(epd). This leads to an
error if URBs with packets shorter than the maximum possible length are
submitted, which is allowed according to
Documentation/driver-api/usb/URB.rst and occurs for example with the
snd-usb-audio driver.

Fixes: c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input")
Signed-off-by: Malte Leip <malte@leip.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dummy-hcd: Fix failure to give back unlinked URBs

commit fc834e607ae3d18e1a20bca3f9a2d7f52ea7a2be upstream.

The syzkaller USB fuzzer identified a failure mode in which dummy-hcd
would never give back an unlinked URB.  This causes usb_kill_urb() to
hang, leading to WARNINGs and unkillable threads.

In dummy-hcd, all URBs are given back by the dummy_timer() routine as
it scans through the list of pending URBS.  Failure to give back URBs
can be caused by failure to start or early exit from the scanning
loop.  The code currently has two such pathways: One is triggered when
an unsupported bus transfer speed is encountered, and the other by
exhausting the simulated bandwidth for USB transfers during a frame.

This patch removes those two paths, thereby allowing all unlinked URBs
to be given back in a timely manner.  It adds a check for the bus
speed when the gadget first starts running, so that dummy_timer() will
never thereafter encounter an unsupported speed.  And it prevents the
loop from exiting as soon as the total bandwidth has been used up (the
scanning loop continues, giving back unlinked URBs as they are found,
but not transferring any more data).

Thanks to Andrey Konovalov for manually running the syzkaller fuzzer
to help track down the source of the bug.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+d919b0f29d7b5a4994b9@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: w1 ds2490: Fix bug caused by improper use of altsetting array

commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream.

The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the
ds2490 driver.  This bug is caused by improper use of the altsetting
array in the usb_interface structure (the array's entries are not
always stored in numerical order), combined with a naive assumption
that all interfaces probed by the driver will have the expected number
of altsettings.

The bug can be fixed by replacing references to the possibly
non-existent intf->altsetting[alt] entry with the guaranteed-to-exist
intf->cur_altsetting entry.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+d65f673b847a1a96cdba@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: yurex: Fix protection fault after device removal

commit ef61eb43ada6c1d6b94668f0f514e4c268093ff3 upstream.

The syzkaller USB fuzzer found a general-protection-fault bug in the
yurex driver.  The fault occurs when a device has been unplugged; the
driver's interrupt-URB handler logs an error message referring to the
device by name, after the device has been unregistered and its name
deallocated.

This problem is caused by the fact that the interrupt URB isn't
cancelled until the driver's private data structure is released, which
can happen long after the device is gone.  The cure is to make sure
that the interrupt URB is killed before yurex_disconnect() returns;
this is exactly the sort of thing that usb_poison_urb() was meant for.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+2eb9121678bdb36e6d57@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR

commit 3887c26c0e24d50a4d0ce20cf4726737cee1a2fd upstream.

Some ASUS models like Q325UAR with ALC295 codec requires the same
fixup that has been applied to ALC294 codec.  Just copy the entry with
the pin matching to cover ALC295 too.

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784485
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fixed Dell AIO speaker noise

commit 0700d3d117a7f110ddddbd83873e13652f69c54b upstream.

Fixed Dell AIO speaker noise.
spec->gen.auto_mute_via_amp = 1, this option was solved speaker white
noise at boot.
codec->power_save_node = 0, this option was solved speaker noise at
resume back.

Fixes: 9226665159f0 ("ALSA: hda/realtek - Fix Dell AIO LineOut issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add new Dell platform for headset mode

commit 0a29c57b76624723b6b00c027e0e992d130ace49 upstream.

Add two Dell platform for headset mode.

[ Note: this is a further correction / addition of the previous
  pin-based quirks for Dell machines; another entry for ALC236 with
  the d-mic pin 0x12 and an entry for ALC295 -- tiwai ]

Fixes: b26e36b7ef36 ("ALSA: hda/realtek - add two more pin configuration sets to quirk table")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: Prevent runtime suspend of adapter when Host Notify is required

commit 72bfcee11cf89509795c56b0e40a3785ab00bbdd upstream.

Multiple users have reported their Synaptics touchpad has stopped
working between v4.20.1 and v4.20.2 when using SMBus interface.

The culprit for this appeared to be commit c5eb1190074c ("PCI / PM: Allow
runtime PM without callback functions") that fixed the runtime PM for
i2c-i801 SMBus adapter. Those Synaptics touchpad are using i2c-i801
for SMBus communication and testing showed they are able to get back
working by preventing the runtime suspend of adapter.

Normally when i2c-i801 SMBus adapter transmits with the client it resumes
before operation and autosuspends after.

However, if client requires SMBus Host Notify protocol, what those
Synaptics touchpads do, then the host adapter must not go to runtime
suspend since then it cannot process incoming SMBus Host Notify commands
the client may send.

Fix this by keeping I2C/SMBus adapter active in case client requires
Host Notify.

Reported-by: Keijo Vaara <ferdasyn@rocketmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203297
Fixes: c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Keijo Vaara <ferdasyn@rocketmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: Allow recovery of the initial IRQ by an I2C client device.

commit 93b6604c5a669d84e45fe5129294875bf82eb1ff upstream.

A previous change allowed I2C client devices to discover new IRQs upon
reprobe by clearing the IRQ in i2c_device_remove. However, if an IRQ was
assigned in i2c_new_device, that information is lost.

For example, the touchscreen and trackpad devices on a Dell Inspiron laptop
are I2C devices whose IRQs are defined by ACPI extended IRQ types. The
client device structures are initialized during an ACPI walk. After
removing the i2c_hid device, modprobe fails.

This change caches the initial IRQ value in i2c_new_device and then resets
the client device IRQ to the initial value in i2c_device_remove.

Fixes: 6f108dd70d30 ("i2c: Clear client->irq in i2c_device_remove")
Signed-off-by: Jim Broadus <jbroadus@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
[wsa: this is an easy to backport fix for the regression. We will
refactor the code to handle irq assignments better in general.]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: Clear client->irq in i2c_device_remove

commit 6f108dd70d3010c391c1e9f56f3f20d1f9e75450 upstream.

The IRQ will be mapped in i2c_device_probe only if client->irq is zero and
i2c_device_remove does not clear this. When rebinding an I2C device,
whos IRQ provider has also been rebound this means that an IRQ mapping
will never be created, causing the I2C device to fail to acquire its
IRQ. Fix this issue by clearing client->irq in i2c_device_remove,
forcing i2c_device_probe to lookup the mapping again.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: Remove unnecessary call to irq_find_mapping

commit b9bb3fdf4e870fb655064f5c3c81c1fee7fd89ce upstream.

irq_create_mapping calls irq_find_mapping internally and will use the
found mapping if one exists, so there is no need to manually call this
from i2c_smbus_host_notify_to_irq.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: imx: correct the method of getting private data in notifier_call

commit d386bb9042f4629bf62cdc5952ea8aab225f24a7 upstream.

The way of getting private imx_i2c_struct in i2c_imx_clk_notifier_call()
is incorrect, should use clk_change_nb element to get correct address
and avoid below kernel dump during POST_RATE_CHANGE notify by clk
framework:

Unable to handle kernel paging request at virtual address 03ef1488
pgd = (ptrval)
[03ef1488] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events reduce_bus_freq_handler
PC is at i2c_imx_set_clk+0x10/0xb8
LR is at i2c_imx_clk_notifier_call+0x20/0x28
pc : [<806a893c>]    lr : [<806a8a04>]    psr: a0080013
sp : bf399dd8  ip : bf3432ac  fp : bf7c1dc0
r10: 00000002  r9 : 00000000  r8 : 00000000
r7 : 03ef1480  r6 : bf399e50  r5 : ffffffff  r4 : 00000000
r3 : bf025300  r2 : bf399e50  r1 : 00b71b00  r0 : bf399be8
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 4e03004a  DAC: 00000051
Process kworker/2:1 (pid: 38, stack limit = 0x(ptrval))
Stack: (0xbf399dd8 to 0xbf39a000)
9dc0:                                                       806a89e4 00000000
9de0: ffffffff bf399e50 00000002 806a8a04 806a89e4 80142900 ffffffff 00000000
9e00: bf34ef18 bf34ef04 00000000 ffffffff bf399e50 80142d84 00000000 bf399e6c
9e20: bf34ef00 80f214c4 bf025300 00000002 80f08d08 bf017480 00000000 80142df0
9e40: 00000000 80166ed8 80c27638 8045de58 bf352340 03ef1480 00b71b00 0f82e242
9e60: bf025300 00000002 03ef1480 80f60e5c 00000001 8045edf0 00000002 8045eb08
9e80: bf025300 00000002 03ef1480 8045ee10 03ef1480 8045eb08 bf01be40 00000002
9ea0: 03ef1480 8045ee10 07de2900 8045eb08 bf01b780 00000002 07de2900 8045ee10
9ec0: 80c27898 bf399ee4 bf020a80 00000002 1f78a400 8045ee10 80f60e5c 80460514
9ee0: 80f60e5c bf01b600 bf01b480 80460460 0f82e242 bf383a80 bf383a00 80f60e5c
9f00: 00000000 bf7c1dc0 80f60e70 80460564 80f60df0 80f60d24 80f60df0 8011e72c
9f20: 00000000 80f60df0 80f60e6c bf7c4f00 00000000 8011e7ac bf274000 8013bd84
9f40: bf7c1dd8 80f03d00 bf274000 bf7c1dc0 bf274014 bf7c1dd8 80f03d00 bf398000
9f60: 00000008 8013bfb4 00000000 bf25d100 bf25d0c0 00000000 bf274000 8013bf88
9f80: bf25d11c bf0cfebc 00000000 8014140c bf25d0c0 801412ec 00000000 00000000
9fa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<806a893c>] (i2c_imx_set_clk) from [<806a8a04>] (i2c_imx_clk_notifier_call+0x20/0x28)
[<806a8a04>] (i2c_imx_clk_notifier_call) from [<80142900>] (notifier_call_chain+0x44/0x84)
[<80142900>] (notifier_call_chain) from [<80142d84>] (__srcu_notifier_call_chain+0x44/0x98)
[<80142d84>] (__srcu_notifier_call_chain) from [<80142df0>] (srcu_notifier_call_chain+0x18/0x20)
[<80142df0>] (srcu_notifier_call_chain) from [<8045de58>] (__clk_notify+0x78/0xa4)
[<8045de58>] (__clk_notify) from [<8045edf0>] (__clk_recalc_rates+0x60/0xb4)
[<8045edf0>] (__clk_recalc_rates) from [<8045ee10>] (__clk_recalc_rates+0x80/0xb4)
Code: e92d40f8 e5903298 e59072a0 e1530001 (e5975008)
---[ end trace fc7f5514b97b6cbb ]---

Fixes: 90ad2cbe88c2 ("i2c: imx: use clk notifier for rate changes")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: synquacer: fix enumeration of slave devices

commit 95e0cf3caeb11e1b0398c747b5cfa12828263824 upstream.

The I2C host driver for SynQuacer fails to populate the of_node and
ACPI companion fields of the struct i2c_adapter it instantiates,
resulting in enumeration of the subordinate I2C bus to fail.

Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't attempt to rename ERR_PTR() debugfs dirs

commit 517879147493a5e1df6b89a50f708f1133fcaddb upstream.

We need to dereference the directory to get its parent to
be able to rename it, so it's clearly not safe to try to
do this with ERR_PTR() pointers. Skip in this case.

It seems that this is most likely what was causing the
report by syzbot, but I'm not entirely sure as it didn't
come with a reproducer this time.

Cc: stable@vger.kernel.org
Reported-by: syzbot+4ece1a28b8f4730547c9@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: Make resume actually do something useful again on SDIO cards

commit b82d6c1f8f8288f744a9dcc16cd3085d535decca upstream.

The commit fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent
adapter status variables") had a fairly straightforward bug in it.  It
contained this bit of diff:

 - if (!adapter->is_suspended) {
 + if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {

As you can see the patch missed the "!" when converting to the atomic
bitops.  This meant that the resume hasn't done anything at all since
that commit landed and suspend/resume for mwifiex SDIO cards has been
totally broken.

After fixing this mwifiex suspend/resume appears to work again, at
least with the simple testing I've done.

Fixes: fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables")
Cc: <stable@vger.kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fix driver operation for 5350

commit 5c9adef9789148d382d7d1307c3d6bfaf51d143d upstream.

We introduced a bug that prevented this old device from
working. The driver would simply not be able to complete
the INIT flow while spewing this warning:

 CSR addresses aren't configured
 WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917
 iwl_pci_probe+0x160/0x1e0 [iwlwifi]

Cc: stable@vger.kernel.org # v4.18+
Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: c8f1b51e506d ("iwlwifi: allow different csr flags for different device families")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.40

ath10k: Drop WARN_ON()s that always trigger during system resume

commit 9e80ad37f6788ed52b89a3cfcd593e0aa69b216d upstream.

ath10k_mac_vif_chan() always returns an error for the given vif
during system-wide resume which reliably triggers two WARN_ON()s
in ath10k_bss_info_changed() and they are not particularly
useful in that code path, so drop them.

Tested: QCA6174 hw3.2 PCI with WLAN.RM.2.0-00180-QCARMSWPZ-1
Tested: QCA6174 hw3.2 SDIO with WLAN.RMH.4.4.1-00007-QCARMSWP-1

Fixes: cd93b83ad927 ("ath10k: support for multicast rate control")
Fixes: f279294e9ee2 ("ath10k: add support for configuring management packet rate")
Cc: stable@vger.kernel.org
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: use dynamic buffers

commit e5c812e84f0dece3400d5caf42522287e6ef139f upstream.

The line6 driver uses a lot of USB buffers off of the stack, which is
not allowed on many systems, causing the driver to crash on some of
them.  Fix this up by dynamically allocating the buffers with kmalloc()
which allows for proper DMA-able memory.

Reported-by: Christo Gouws <gouws.christo@gmail.com>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Christo Gouws <gouws.christo@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Fix size checks in vmx_set_nested_state

commit e8ab8d24b488632d07ce5ddb261f1d454114415b upstream.

The size checks in vmx_nested_state are wrong because the calculations
are made based on the size of a pointer to a struct kvm_nested_state
rather than the size of a struct kvm_nested_state.

Reported-by: Felix Wilhelm <fwilhelm@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Drew Schmitt <dasch@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Fixes: 8fcc4b5923af5de58b80b53a069453b135693304
Cc: stable@ver.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Whitelist port 0x7e for pre-incrementing %rip

commit 8764ed55c9705e426d889ff16c26f398bba70b9b upstream.

KVM's recent bug fix to update %rip after emulating I/O broke userspace
that relied on the previous behavior of incrementing %rip prior to
exiting to userspace.  When running a Windows XP guest on AMD hardware,
Qemu may patch "OUT 0x7E" instructions in reaction to the OUT itself.
Because KVM's old behavior was to increment %rip before exiting to
userspace to handle the I/O, Qemu manually adjusted %rip to account for
the OUT instruction.

Arguably this is a userspace bug as KVM requires userspace to re-enter
the kernel to complete instruction emulation before taking any other
actions.  That being said, this is a bit of a grey area and breaking
userspace that has worked for many years is bad.

Pre-increment %rip on OUT to port 0x7e before exiting to userspace to
hack around the issue.

Fixes: 45def77ebf79e ("KVM: x86: update %rip after emulating IO")
Reported-by: Simon Becherer <simon@becherer.de>
Reported-and-tested-by: Iakov Karpov <srid@rkmail.ru>
Reported-by: Gabriele Balducci <balducci@units.it>
Reported-by: Antti Antinoja <reader@fennosys.fi>
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: fix copy to fragments in reencrypt

[ Upstream commit eb3d38d5adb520435d4e4af32529ccb13ccc9935 ]

Fragments may contain data from other records so we have to account
for that when we calculate the destination and max length of copy we
can perform.  Note that 'offset' is the offset within the message,
so it can't be passed as offset within the frag..

Here skb_store_bits() would have realised the call is wrong and
simply not copy data.

Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: don't copy negative amounts of data in reencrypt

[ Upstream commit 97e1caa517e22d62a283b876fb8aa5f4672c83dd ]

There is no guarantee the record starts before the skb frags.
If we don't check for this condition copy amount will get
negative, leading to reads and writes to random memory locations.
Familiar hilarity ensues.

Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix uninitialized variable usage in bnxt_rx_pkt().

[ Upstream commit 0b397b17a4120cb80f7bf89eb30587b3dd9b0d1d ]

In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle
the buffers and jump to the end where the uninitailized variable "len"
is referenced.  Fix it by adding a new jump label that will skip
the length update.  This is the most correct fix since the length
may not be valid when we get this type of error.

Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Free short FW command HWRM memory in error path in bnxt_init_one()

[ Upstream commit f9099d611449836a51a65f40ea7dc9cb5f2f665e ]

In the bnxt_init_one() error path, short FW command request memory
is not freed. This patch fixes it.

Fixes: e605db801bde ("bnxt_en: Support for Short Firmware Message")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Improve multicast address setup logic.

[ Upstream commit b4e30e8e7ea1d1e35ffd64ca46f7d9a7f227b4bf ]

The driver builds a list of multicast addresses and sends it to the
firmware when the driver's ndo_set_rx_mode() is called.  In rare
cases, the firmware can fail this call if internal resources to
add multicast addresses are exhausted.  In that case, we should
try the call again by setting the ALL_MCAST flag which is more
guaranteed to succeed.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: validate msg_namelen in send directly

[ Upstream commit 486efdc8f6ce802b27e15921d2353cc740c55451 ]

Packet sockets in datagram mode take a destination address. Verify its
length before passing to dev_hard_header.

Prior to 2.6.14-rc3, the send code ignored sll_halen. This is
established behavior. Directly compare msg_namelen to dev->addr_len.

Change v1->v2: initialize addr in all paths

Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero")
Suggested-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: fib_rule_tests: print the result and return 1 if any tests failed

[ Upstream commit f68d7c44e76532e46f292ad941aa3706cb9e6e40 ]

Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: avoid running the sctp state machine recursively

[ Upstream commit fbd019737d71e405f86549fd738f81e2ff3dd073 ]

Ying triggered a call trace when doing an asconf testing:

  BUG: scheduling while atomic: swapper/12/0/0x10000100
  Call Trace:
   <IRQ>  [<ffffffffa4375904>] dump_stack+0x19/0x1b
   [<ffffffffa436fcaf>] __schedule_bug+0x64/0x72
   [<ffffffffa437b93a>] __schedule+0x9ba/0xa00
   [<ffffffffa3cd5326>] __cond_resched+0x26/0x30
   [<ffffffffa437bc4a>] _cond_resched+0x3a/0x50
   [<ffffffffa3e22be8>] kmem_cache_alloc_node+0x38/0x200
   [<ffffffffa423512d>] __alloc_skb+0x5d/0x2d0
   [<ffffffffc0995320>] sctp_packet_transmit+0x610/0xa20 [sctp]
   [<ffffffffc098510e>] sctp_outq_flush+0x2ce/0xc00 [sctp]
   [<ffffffffc098646c>] sctp_outq_uncork+0x1c/0x20 [sctp]
   [<ffffffffc0977338>] sctp_cmd_interpreter.isra.22+0xc8/0x1460 [sctp]
   [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp]
   [<ffffffffc099443d>] sctp_primitive_ASCONF+0x3d/0x50 [sctp]
   [<ffffffffc0977384>] sctp_cmd_interpreter.isra.22+0x114/0x1460 [sctp]
   [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp]
   [<ffffffffc097b3a4>] sctp_assoc_bh_rcv+0xf4/0x1b0 [sctp]
   [<ffffffffc09840f1>] sctp_inq_push+0x51/0x70 [sctp]
   [<ffffffffc099732b>] sctp_rcv+0xa8b/0xbd0 [sctp]

As it shows, the first sctp_do_sm() running under atomic context (NET_RX
softirq) invoked sctp_primitive_ASCONF() that uses GFP_KERNEL flag later,
and this flag is supposed to be used in non-atomic context only. Besides,
sctp_do_sm() was called recursively, which is not expected.

Vlad tried to fix this recursive call in Commit c0786693404c ("sctp: Fix
oops when sending queued ASCONF chunks") by introducing a new command
SCTP_CMD_SEND_NEXT_ASCONF. But it didn't work as this command is still
used in the first sctp_do_sm() call, and sctp_primitive_ASCONF() will
be called in this command again.

To avoid calling sctp_do_sm() recursively, we send the next queued ASCONF
not by sctp_primitive_ASCONF(), but by sctp_sf_do_prm_asconf() in the 1st
sctp_do_sm() directly.

Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix net namespace cleanup

[ Upstream commit b13023421b5179413421333f602850914f6a7ad8 ]

In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the
->calls list is empty, emitting error messages if not, and (2) wait for the
RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0).

To avoid taking the call_lock, the function prechecks ->calls and if empty,
it returns to avoid taking the lock - this is wrong, however: it still
needs to go and do the second phase and wait for ->nr_calls to become 0.

Without this, the rxrpc_net struct may get deallocated before we get to the
RCU cleanup for the last calls.  This can lead to:

  Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384
  050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkakkkkkkk

Note the "61" at offset 0x58.  This corresponds to the ->nr_calls member of
struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k
slab).

Fix this by flipping the condition on the if-statement, putting the locked
section inside the if-body and dropping the return from there.  The
function will then always go on to wait for the RCU cleanup on outstanding
calls.

Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: avoid NULL pointer deref on nskb->sk in fallback

[ Upstream commit 2dcb003314032c6efb13a065ffae60d164b2dd35 ]

update_chksum() accesses nskb->sk before it has been set
by complete_skb(), move the init up.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: Fix buffer overrun with stats counters

[ Upstream commit fdfdf86720a34527f777cbe0d8599bf0528fa146 ]

marvell_get_sset_count() returns how many statistics counters there
are. If the PHY supports fibre, there are 3, otherwise two.

marvell_get_strings() does not make this distinction, and always
returns 3 strings. This then often results in writing past the end
of the buffer for the strings.

Fixes: 2170fef78a40 ("Marvell phy: add field to get errors from fiber link.")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc

[ Upstream commit f949a12fd697479f68d99dc65e9bbab68ee49043 ]

The "fs->location" is a u32 that comes from the user in ethtool_set_rxnfc().
We can't pass unclamped values to test_bit() or it results in an out of
bounds access beyond the end of the bitmap.

Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: use rcu_dereference_sk_user_data() in l2tp_udp_encap_recv()

[ Upstream commit c1c477217882c610a2ba0268f5faf36c9c092528 ]

Canonical way to fetch sk_user_data from an encap_rcv() handler called
from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(),
otherwise compiler might read it multiple times.

Fixes: d00fa9adc528 ("il2tp: fix races with tunnel socket close")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2ip: fix possible use-after-free

[ Upstream commit a622b40035d16196bf19b2b33b854862595245fc ]

Before taking a refcount on a rcu protected structure,
we need to make sure the refcount is not zero.

syzbot reported :

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline]
WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 panic+0x2cb/0x65c kernel/panic.c:214
 __warn.cold+0x20/0x45 kernel/panic.c:571
 report_bug+0x263/0x2b0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:179 [inline]
 fixup_bug arch/x86/kernel/traps.c:174 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline]
RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154
Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41
RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67
RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1
R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968
R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440
 l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline]
 l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173
 pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702
 __sys_connect+0x266/0x330 net/socket.c:1808
 __do_sys_connect net/socket.c:1819 [inline]
 __se_sys_connect net/socket.c:1816 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1816

Fixes: 54652eb12c1b ("l2tp: hold tunnel while looking up sessions in l2tp_netlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: invert flowlabel sharing check in process and user mode

[ Upstream commit 95c169251bf734aa555a1e8043e4d88ec97a04ec ]

A request for a flowlabel fails in process or user exclusive mode must
fail if the caller pid or uid does not match. Invert the test.

Previously, the test was unsafe wrt PID recycling, but indeed tested
for inequality: fl1->owner != fl->owner

Fixes: 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6/flowlabel: wait rcu grace period before put_pid()

[ Upstream commit 6c0afef5fb0c27758f4d52b2210c61b6bd8b4470 ]

syzbot was able to catch a use-after-free read in pid_nr_ns() [1]

ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid
but fl_free() releases fl->owner.pid before rcu grace period is started.

[1]

BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407
Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087

CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
 pid_nr_ns+0x128/0x140 kernel/pid.c:407
 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794
 seq_read+0xad3/0x1130 fs/seq_file.c:268
 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_loop_readv_writev fs/read_write.c:688 [inline]
 do_iter_read+0x4a9/0x660 fs/read_write.c:922
 vfs_readv+0xf0/0x160 fs/read_write.c:984
 kernel_readv fs/splice.c:358 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:413
 do_splice_to+0x12a/0x190 fs/splice.c:876
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062
 do_sendfile+0x597/0xd00 fs/read_write.c:1443
 __do_sys_sendfile64 fs/read_write.c:1498 [inline]
 __se_sys_sendfile64 fs/read_write.c:1490 [inline]
 __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9
RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4
R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff

Allocated by task 17543:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc mm/kasan/common.c:497 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470
 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505
 slab_post_alloc_hook mm/slab.h:437 [inline]
 slab_alloc mm/slab.c:3393 [inline]
 kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555
 alloc_pid+0x55/0x8f0 kernel/pid.c:168
 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932
 copy_process kernel/fork.c:1709 [inline]
 _do_fork+0x257/0xfd0 kernel/fork.c:2226
 __do_sys_clone kernel/fork.c:2333 [inline]
 __se_sys_clone kernel/fork.c:2327 [inline]
 __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7789:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467
 __cache_free mm/slab.c:3499 [inline]
 kmem_cache_free+0x86/0x260 mm/slab.c:3765
 put_pid.part.0+0x111/0x150 kernel/pid.c:111
 put_pid+0x20/0x30 kernel/pid.c:105
 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102
 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:293

The buggy address belongs to the object at ffff888094012a00
 which belongs to the cache pid_2 of size 88
The buggy address is located 4 bytes inside of
 88-byte region [ffff888094012a00, ffff888094012a58)
The buggy address belongs to the page:
page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080
raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
 ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
>ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
                   ^
 ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
 ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc

Fixes: 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: fix races in ip6_dst_destroy()

[ Upstream commit 0e2338749192ce0e52e7174c5352f627632f478a ]

We had many syzbot reports that seem to be caused by use-after-free
of struct fib6_info.

ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception()
are writers vs rt->from, and use non consistent synchronization among
themselves.

Switching to xchg() will solve the issues with no possible
lockdep issues.

BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline]
BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline]
BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline]
BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline]
BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960
Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649

CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 kasan_report.cold+0x5/0x40 mm/kasan/report.c:321
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 kasan_check_write+0x14/0x20 mm/kasan/common.c:108
 atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline]
 fib6_info_release include/net/ip6_fib.h:294 [inline]
 fib6_info_release include/net/ip6_fib.h:292 [inline]
 fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline]
 fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960
 fib6_del_route net/ipv6/ip6_fib.c:1813 [inline]
 fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844
 fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006
 fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928
 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976
 fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055
 __fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071
 fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082
 rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057
 rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062
 addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705
 addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630
 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753
 call_netdevice_notifiers_extack net/core/dev.c:1765 [inline]
 call_netdevice_notifiers net/core/dev.c:1779 [inline]
 dev_close_many+0x33f/0x6f0 net/core/dev.c:1522
 rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177
 rollback_registered+0x109/0x1d0 net/core/dev.c:8242
 unregister_netdevice_queue net/core/dev.c:9289 [inline]
 unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282
 unregister_netdevice include/linux/netdevice.h:2658 [inline]
 __tun_detach+0xd5b/0x1000 drivers/net/tun.c:727
 tun_detach drivers/net/tun.c:744 [inline]
 tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443
 __fput+0x2e5/0x8d0 fs/file_table.c:278
 ____fput+0x16/0x20 fs/file_table.c:309
 task_work_run+0x14a/0x1c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x90a/0x2fa0 kernel/exit.c:876
 do_group_exit+0x135/0x370 kernel/exit.c:980
 __do_sys_exit_group kernel/exit.c:991 [inline]
 __se_sys_exit_group kernel/exit.c:989 [inline]
 __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9
RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043
RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1
R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800

Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: A few fixes on dereferencing rt->from

[ Upstream commit 886b7a50100a50f1cbd08a6f8ec5884dfbe082dc ]

It is a followup after the fix in
commit 9c69a1320515 ("route: Avoid crash from dereferencing NULL rt->from")

rt6_do_redirect():
1. NULL checking is needed on rt->from because a parallel
   fib6_info delete could happen that sets rt->from to NULL.
   (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()).

2. fib6_info_hold() is not enough.  Same reason as (1).
   Meaning, holding dst->__refcnt cannot ensure
   rt->from is not NULL or rt->from->fib6_ref is not 0.

   Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc()
   is already doing, this patch chooses to extend the rcu section
   to keep "from" dereference-able after checking for NULL.

inet6_rtm_getroute():
1. NULL checking is also needed on rt->from for a similar reason.
   Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED.

Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: ip_do_fragment: Preserve skb_iif during fragmentation

[ Upstream commit d2f0c961148f65bc73eda72b9fa3a4e80973cb49 ]

Previously, during fragmentation after forwarding, skb->skb_iif isn't
preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given
'from' skb.

As a result, ip_do_fragment's creates fragments with zero skb_iif,
leading to inconsistent behavior.

Assume for example an eBPF program attached at tc egress (post
forwarding) that examines __sk_buff->ingress_ifindex:
 - the correct iif is observed if forwarding path does not involve
   fragmentation/refragmentation
 - a bogus iif is observed if forwarding path involves
   fragmentation/refragmentatiom

Fix, by preserving skb_iif during 'ip_copy_metadata'.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.39

leds: trigger: netdev: use memcpy in device_name_store

[ Upstream commit 909346433064b8d840dc82af26161926b8d37558 ]

If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example

# cat device_name

# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32

I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.

This is also preparation for future patches.

Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

leds: pca9532: fix a potential NULL pointer dereference

[ Upstream commit 0aab8e4df4702b31314a27ec4b0631dfad0fae0a ]

In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.

Fixes: fa4191a609f2 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK

[ Upstream commit fcfc2aa0185f4a731d05a21e9f359968fdfd02e7 ]

There are a few system calls (pselect, ppoll, etc) which replace a task
sigmask while they are running in a kernel-space

When a task calls one of these syscalls, the kernel saves a current
sigmask in task->saved_sigmask and sets a syscall sigmask.

On syscall-exit-stop, ptrace traps a task before restoring the
saved_sigmask, so PTRACE_GETSIGMASK returns the syscall sigmask and
PTRACE_SETSIGMASK does nothing, because its sigmask is replaced by
saved_sigmask, when the task returns to user-space.

This patch fixes this problem.  PTRACE_GETSIGMASK returns saved_sigmask
if it's set.  PTRACE_SETSIGMASK drops the TIF_RESTORE_SIGMASK flag.

Link: http://lkml.kernel.org/r/20181120060616.6043-1-avagin@gmail.com
Fixes: 29000caecbe8 ("ptrace: add ability to get/set signal-blocked mask")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

iommu/amd: Reserve exclusion range in iova-domain

[ Upstream commit 8aafaaf2212192012f5bae305bb31cdf7681d777 ]

If a device has an exclusion range specified in the IVRS
table, this region needs to be reserved in the iova-domain
of that device. This hasn't happened until now and can cause
data corruption on data transfered with these devices.

Treat exclusion ranges as reserved regions in the iommu-core
to fix the problem.

Fixes: be2a022c0dd0 ('x86, AMD IOMMU: add functions to parse IOMMU memory mapping requirements for devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

kconfig/[mn]conf: handle backspace (^H) key

[ Upstream commit 9c38f1f044080392603c497ecca4d7d09876ff99 ]

Backspace is not working on some terminal emulators which do not send the
key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127).
But currently only '^?' is handled. Let's also handle '^H' for those
terminals.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

perf machine: Update kernel map address and re-order properly

[ Upstream commit 977c7a6d1e263ff1d755f28595b99e4bc0c48a9f ]

Since commit 1fb87b8e9599 ("perf machine: Don't search for active kernel
start in __machine__create_kernel_maps"), the __machine__create_kernel_maps()
just create a map what start and end are both zero. Though the address will be
updated later, the order of map in the rbtree may be incorrect.

The commit ee05d21791db ("perf machine: Set main kernel end address properly")
fixed the logic in machine__create_kernel_maps(), but it's still wrong in
function machine__process_kernel_mmap_event().

To reproduce this issue, we need an environment which the module address
is before the kernel text segment. I tested it on an aarch64 machine with
kernel 4.19.25:

  [root@localhost hulk]# grep _stext /proc/kallsyms
  ffff000008081000 T _stext
  [root@localhost hulk]# grep _etext /proc/kallsyms
  ffff000009780000 R _etext
  [root@localhost hulk]# tail /proc/modules
  hisi_sas_v2_hw 77824 0 - Live 0xffff00000191d000
  nvme_core 126976 7 nvme, Live 0xffff0000018b6000
  mdio 20480 1 ixgbe, Live 0xffff0000018ab000
  hisi_sas_main 106496 1 hisi_sas_v2_hw, Live 0xffff000001861000
  hns_mdio 20480 2 - Live 0xffff000001822000
  hnae 28672 3 hns_dsaf,hns_enet_drv, Live 0xffff000001815000
  dm_mirror 40960 0 - Live 0xffff000001804000
  dm_region_hash 32768 1 dm_mirror, Live 0xffff0000017f5000
  dm_log 32768 2 dm_mirror,dm_region_hash, Live 0xffff0000017e7000
  dm_mod 315392 17 dm_mirror,dm_log, Live 0xffff000001780000
  [root@localhost hulk]#

Before fix:

  [root@localhost bin]# perf record sleep 3
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ]
  [root@localhost bin]# perf buildid-list -i perf.data
  4c4e46c971ca935f781e603a09b52a92e8bdfee8 [vdso]
  [root@localhost bin]# perf buildid-list -i perf.data -H
  0000000000000000000000000000000000000000 /proc/kcore
  [root@localhost bin]#

After fix:

  [root@localhost tools]# ./perf/perf record sleep 3
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ]
  [root@localhost tools]# ./perf/perf buildid-list -i perf.data
  28a6c690262896dbd1b5e1011ed81623e6db0610 [kernel.kallsyms]
  106c14ce6e4acea3453e484dc604d66666f08a2f [vdso]
  [root@localhost tools]# ./perf/perf buildid-list -i perf.data -H
  28a6c690262896dbd1b5e1011ed81623e6db0610 /proc/kcore

Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190228092003.34071-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

nvme-multipath: relax ANA state check

[ Upstream commit cc2278c413c3a06a93c23ee8722e4dd3d621de12 ]

When undergoing state transitions I/O might be requeued, hence
we should always call nvme_mpath_set_live() to schedule requeue_work
whenever the nvme device is live, independent on whether the
old state was live or not.

Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Gargi Srinivas <sring@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

gpio: of: Fix of_gpiochip_add() error path

[ Upstream commit f7299d441a4da8a5088e651ea55023525a793a13 ]

If the call to of_gpiochip_scan_gpios() in of_gpiochip_add() fails, no
error handling is performed.  This lead to the need of callers to call
of_gpiochip_remove() on failure, which causes "BAD of_node_put() on ..."
if the failure happened before the call to of_node_get().

Fix this by adding proper error handling.

Note that calling gpiochip_remove_pin_ranges() multiple times causes no
harm: subsequent calls are a no-op.

Fixes: dfbd379ba9b7431e ("gpio: of: Return error if gpio hog configuration failed")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

libata: fix using DMA buffers on stack

[ Upstream commit dd08a8d9a66de4b54575c294a92630299f7e0fe7 ]

When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for
a stack virtual address. Stack DMA buffers must be avoided.

Signed-off-by: raymond pang <raymondpangxd@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

x86/mm: Don't exceed the valid physical address space

[ Upstream commit 92c77f7c4d5dfaaf45b2ce19360e69977c264766 ]

valid_phys_addr_range() is used to sanity check the physical address range
of an operation, e.g., access to /dev/mem. It uses __pa(high_memory)
internally.

If memory is populated at the end of the physical address space, then
__pa(high_memory) is outside of the physical address space because:

   high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;

For the comparison in valid_phys_addr_range() this is not an issue, but if
CONFIG_DEBUG_VIRTUAL is enabled, __pa() maps to __phys_addr(), which
verifies that the resulting physical address is within the valid physical
address space of the CPU. So in the case that memory is populated at the
end of the physical address space, this is not true and triggers a
VIRTUAL_BUG_ON().

Use __pa(high_memory - 1) to prevent the conversion from going beyond
the end of valid physical addresses.

Fixes: be62a3204406 ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Craig Bergstrom <craigb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Sean Young <sean@mess.org>
Link: https://lkml.kernel.org/r/20190326001817.15413-2-rcampbell@nvidia.com
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN

[ Upstream commit c8206579175c34a2546de8a74262456278a7795a ]

If an incoming ELS of type RSCN contains more than one element, zfcp
suboptimally causes repeated erp trigger NOP trace records for each
previously failed port. These could be ports that went away.  It loops over
each RSCN element, and for each of those in an inner loop over all
zfcp_ports.

The trigger to recover failed ports should be just the reception of some
RSCN, no matter how many elements it has. So we can loop over failed ports
separately, and only then loop over each RSCN element to handle the
non-failed ports.

The call chain was:

  zfcp_fc_incoming_rscn
    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link
          if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"   <===

In order the reduce the "flooding" of the REC trace area in such cases, we
factor out handling the failed ports to be outside of the entries loop:

  zfcp_fc_incoming_rscn
    if (no_entries > 1)                                     <===
      list_for_each_entry(port, &adapter->port_list, list)  <===
        if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"     <===
    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link

Abbreviated example trace records before this code change:

Tag            : fcrscn1
WWPN           : 0x500507630310d327
ERP want       : 0x02
ERP need       : 0x02

Tag            : fcrscn1
WWPN           : 0x500507630310d327
ERP want       : 0x02
ERP need       : 0x00                 NOP => superfluous trace record

The last trace entry repeats if there are more than 2 RSCN elements.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

ceph: fix use-after-free on symlink traversal

[ Upstream commit daf5cc27eed99afdea8d96e71b89ba41f5406ef6 ]

free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

usb: u132-hcd: fix resource leak

[ Upstream commit f276e002793cdb820862e8ea8f76769d56bba575 ]

if platform_driver_register fails, cleanup the allocated resource
gracefully.

Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

x86/realmode: Don't leak the trampoline kernel address

[ Upstream commit b929a500d68479163c48739d809cbf4c1335db6f ]

Since commit

  ad67b74d2469 ("printk: hash addresses printed with %p")

at boot "____ptrval____" is printed instead of the trampoline addresses:

  Base memory trampoline at [(____ptrval____)] 99000 size 24576

Remove the print as we don't want to leak kernel addresses and this
statement is not needed anymore.

Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

leds: trigger: netdev: fix refcnt leak on interface rename

[ Upstream commit 4cb6560514fa19d556954b88128f3846fee66a03 ]

Renaming a netdev-trigger-tracked interface was resulting in an
unbalanced dev_hold().

Example:
> iw phy phy0 interface add foo type __ap
> echo netdev > trigger
> echo foo > device_name
> ip link set foo name bar
> iw dev bar del
[  237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1

Above problem was caused by trigger checking a dev->name which obviously
changes after renaming an interface. It meant missing all further events
including the NETDEV_UNREGISTER which is required for calling dev_put().

This change fixes that by:
1) Comparing device struct *address* for notification-filtering purposes
2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change)

Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

usb: usb251xb: fix to avoid potential NULL pointer dereference

[ Upstream commit 41f00e6e9e55546390031996b773e7f3c1d95928 ]

of_match_device in usb251xb_probe can fail and returns a NULL pointer.
The patch avoids a potential NULL pointer dereference in this scenario.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

scsi: qla4xxx: fix a potential NULL pointer dereference

[ Upstream commit fba1bdd2a9a93f3e2181ec1936a3c2f6b37e7ed6 ]

In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

scsi: aacraid: Insure we don't access PCIe space during AER/EEH

[ Upstream commit b6554cfe09e1f610aed7d57164ab7760be57acd9 ]

There are a few windows during AER/EEH when we can access PCIe I/O mapped
registers. This will harden the access to insure we do not allow PCIe
access during errors

Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

scsi: mpt3sas: Fix kernel panic during expander reset

[ Upstream commit c2fe742ff6e77c5b4fe4ad273191ddf28fdea25e ]

During expander reset handling, the driver invokes kernel function
scsi_host_find_tag() to obtain outstanding requests associated with the
scsi host managed by the driver. Driver loops from tag value zero to hba
queue depth to obtain the outstanding scmds. But when blk-mq is enabled,
the block layer may return stale entry for one or more requests. This may
lead to kernel panic if the returned value is inaccessible or the memory
pointed by the returned value is reused.

Reference of upstream discussion:

https://patchwork.kernel.org/patch/10734933/

Instead of calling scsi_host_find_tag() API for each and every smid (smid
is tag +1) from one to shost->can_queue, now driver will call this API (to
obtain the outstanding scmd) only for those smid's which are outstanding at
the driver level.

Driver will determine whether this smid is outstanding at driver level by
looking into it's corresponding MPI request frame, if its MPI request frame
is empty, then it means that this smid is free and does not need to call
scsi_host_find_tag() for it.  By doing this, driver will invoke
scsi_host_find_tag() for only those tags which are outstanding at the
driver level.

Driver will check whether particular MPI request frame is empty or not by
looking into the "DevHandle" field. If this field is zero then it means
that this MPI request is empty. For active MPI request DevHandle must be
non-zero.

Also driver will memset the MPI request frame once the corresponding scmd
is processed (i.e. just before calling
scmd->done function).

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

ARM: davinci: fix build failure with allnoconfig

[ Upstream commit 2dbed152e2d4c3fe2442284918d14797898b1e8a ]

allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.

Fix it by selecting REGMAP_MMIO when building in
DaVinci support.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

drm/meson: Uninstall IRQ handler

[ Upstream commit 2d8f92897ad816f5dda54b2ed2fd9f2d7cb1abde ]

meson_drv_unbind() doesn't unregister the IRQ handler, which can lead to
use-after-free if the IRQ fires after unbind:

[   64.656876] Unable to handle kernel paging request at virtual address ffff000011706dbc
...
[   64.662001] pc : meson_irq+0x18/0x30 [meson_drm]

I'm assuming that a similar problem could happen on the error path of
bind(), so uninstall the IRQ handler there as well.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-2-jean-philippe.brucker@arm.com
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

drm/meson: Fix invalid pointer in meson_drv_unbind()

[ Upstream commit 776e78677f514ecddd12dba48b9040958999bd5a ]

meson_drv_bind() registers a meson_drm struct as the device's privdata,
but meson_drv_unbind() tries to retrieve a drm_device. This may cause a
segfault on shutdown:

[ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197
 ...
[ 5194.788850] Call trace:
[ 5194.791349]  drm_dev_unregister+0x1c/0x118 [drm]
[ 5194.795848]  meson_drv_unbind+0x50/0x78 [meson_drm]

Retrieve the right pointer in meson_drv_unbind().

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-1-jean-philippe.brucker@arm.com
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

gpio: aspeed: fix a potential NULL pointer dereference

[ Upstream commit 6cf4511e9729c00a7306cf94085f9cc3c52ee723 ]

In case devm_kzalloc, the patch returns ENOMEM to avoid potential
NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

drm: Fix drm_release() and device unplug

[ Upstream commit 3f04e0a6cfebf48152ac64502346cdc258811f79 ]

If userspace has open fd(s) when drm_dev_unplug() is run, it will result
in drm_dev_unregister() being called twice. First in drm_dev_unplug() and
then later in drm_release() through the call to drm_put_dev().

Since userspace already holds a ref on drm_device through the drm_minor,
it's not necessary to add extra ref counting based on no open file
handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug().

We now have this:
- Userpace holds a ref on drm_device as long as there's open fd(s)
- The driver holds a ref on drm_device as long as it's bound to the
  struct device

When both sides are done with drm_device, it is released.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.org
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: ethernet: ti: fix possible object reference leak

[ Upstream commit 75eac7b5f68b0a0671e795ac636457ee27cc11d8 ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.
./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: ibm: fix possible object reference leak

[ Upstream commit be693df3cf9dd113ff1d2c0d8150199efdba37f6 ]

The call to ehea_get_eth_dn returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Douglas Miller <dougmill@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: xilinx: fix possible object reference leak

[ Upstream commit fa3a419d2f674b431d38748cb58fb7da17ee8949 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Anirudha Sarangi <anirudh@xilinx.com>
Cc: John Linn <John.Linn@xilinx.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

NFS: Fix a typo in nfs_init_timeout_values()

[ Upstream commit 5a698243930c441afccec04e4d5dc8febfd2b775 ]

Specifying a retrans=0 mount parameter to a NFS/TCP mount, is
inadvertently causing the NFS client to rewrite any specified
timeout parameter to the default of 60 seconds.

Fixes: a956beda19a6 ("NFS: Allow the mount option retrans=0")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

drm/tegra: hub: Fix dereference before check

[ Upstream commit 7cf77b273a8fc51e7de622fa6691abd4436a9a6b ]

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi

[ Upstream commit 41b37f4c0fa67185691bcbd30201cad566f2f0d1 ]

This patch fixes a spelling typo.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Fixes: cc42603de320 ("ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net/sched: don't dereference a->goto_chain to read the chain index

[ Upstream commit fe384e2fa36ca084a456fd30558cccc75b4b3fbd ]

callers of tcf_gact_goto_chain_index() can potentially read an old value
of the chain index, or even dereference a NULL 'goto_chain' pointer,
because 'goto_chain' and 'tcfa_action' are read in the traffic path
without caring of concurrent write in the control path. The most recent
value of chain index can be read also from a->tcfa_action (it's encoded
there together with TC_ACT_GOTO_CHAIN bits), so we don't really need to
dereference 'goto_chain': just read the chain id from the control action.

Fixes: e457d86ada27 ("net: sched: add couple of goto_chain helpers")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: macb: Add null check for PCLK and HCLK

[ Upstream commit cd5afa91f078c0787be0a62b5ef90301c00b0271 ]

Both PCLK and HCLK are "required" clocks according to macb devicetree
documentation. There is a chance that devm_clk_get doesn't return a
negative error but just a NULL clock structure instead. In such a case
the driver proceeds as usual and uses pclk value 0 to calculate MDC
divisor which is incorrect. Hence fix the same in clock initialization.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc

[ Upstream commit 6a8ca24590a2136921439b376c926c11a6effc0e ]

phydm.internal is allocated using kzalloc which is used multiple
times without a check for NULL pointer. This patch avoids such a
scenario by returning 0, consistent with the failure case.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

staging: rtl8712: uninitialized memory in read_bbreg_hdl()

[ Upstream commit 22c971db7dd4b0ad8dd88e99c407f7a1f4231a2e ]

Colin King reported a bug in read_bbreg_hdl():

memcpy(pcmd->rsp, (u8 *)&val, pcmd->rspsz);

The problem is that "val" is uninitialized.

This code is obviously not useful, but so far as I can tell
"pcmd->cmdcode" is never GEN_CMD_CODE(_Read_BBREG) so it's not harmful
either.  For now the easiest fix is to just call r8712_free_cmd_obj()
and return.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference

[ Upstream commit d70d70aec9632679dd00dcc1b1e8b2517e2c7da0 ]

skb allocated via dev_alloc_skb can fail and return a NULL pointer.
This patch avoids such a scenario and returns, consistent with other
invocations.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc

[ Upstream commit 7671ce0d92933762f469266daf43bd34d422d58c ]

hwxmits is allocated via kcalloc and not checked for failure before its
dereference. The patch fixes this problem by returning error upstream
in rtl8723bs, rtl8188eu.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: ks8851: Set initial carrier state to down

[ Upstream commit 9624bafa5f6418b9ca5b3f66d1f6a6a2e8bf6d4c ]

The ks8851 chip's initial carrier state is down. A Link Change Interrupt
is signaled once interrupts are enabled if the carrier is up.

The ks8851 driver has it backwards by assuming that the initial carrier
state is up. The state is therefore misrepresented if the interface is
opened with no cable attached. Fix it.

The Link Change interrupt is sometimes not signaled unless the P1MBSR
register (which contains the Link Status bit) is read on ->ndo_open().
This might be a hardware erratum. Read the register by calling
mii_check_link(), which has the desirable side effect of setting the
carrier state to down if the cable was detached while the interface was
closed.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: ks8851: Delay requesting IRQ until opened

[ Upstream commit d268f31552794abf5b6aa5af31021643411f25f5 ]

The ks8851 driver currently requests the IRQ before registering the
net_device.  Because the net_device name is used as IRQ name and is
still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs
apart if multiple ks8851 chips are present.  Most other drivers delay
requesting the IRQ until the net_device is opened.  Do the same.

The driver doesn't enable interrupts on the chip before opening the
net_device and disables them when closing it, so there doesn't seem to
be a need to request the IRQ already on probe.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: ks8851: Reassert reset pin if chip ID check fails

[ Upstream commit 761cfa979a0c177d6c2d93ef5585cd79ae49a7d5 ]

Commit 73fdeb82e963 ("net: ks8851: Add optional vdd_io regulator and
reset gpio") amended the ks8851 driver to briefly assert the chip's
reset pin on probe. It also amended the probe routine's error path to
reassert the reset pin if a subsequent initialization step fails.

However the commit misplaced reassertion of the reset pin in the error
path such that it is not performed if the check of the Chip ID and
Enable Register (CIDER) fails. The error path is therefore slightly
asymmetrical to the probe routine's body. Fix it.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

net: ks8851: Dequeue RX packets explicitly

[ Upstream commit 536d3680fd2dab5c39857d62a3e084198fc74ff9 ]

The ks8851 driver lets the chip auto-dequeue received packets once they
have been read in full. It achieves that by setting the ADRFE flag in
the RXQCR register ("Auto-Dequeue RXQ Frame Enable").

However if allocation of a packet's socket buffer or retrieval of the
packet over the SPI bus fails, the packet will not have been read in
full and is not auto-dequeued. Such partial retrieval of a packet
confuses the chip's RX queue management:  On the next RX interrupt,
the first packet read from the queue will be the one left there
previously and this one can be retrieved without issues. But for any
newly received packets, the frame header status and byte count registers
(RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval.

The chip allows explicitly dequeueing a packet from the RX queue by
setting the RRXEF flag in the RXQCR register ("Release RX Error Frame").
This could be used to dequeue the packet in case of an error, but if
that error is a failed SPI transfer, it is unknown if the packet was
transferred in full and was auto-dequeued or if it was only transferred
in part and requires an explicit dequeue. The safest approach is thus
to always dequeue packets explicitly and forgo auto-dequeueing.

Without this change, I've witnessed packet retrieval break completely
when an SPI DMA transfer fails, requiring a chip reset. Explicit
dequeueing magically fixes this and makes packet retrieval absolutely
robust for me.

The chip's documentation suggests auto-dequeuing and uses the RRXEF
flag only to dequeue error frames which the driver doesn't want to
retrieve. But that seems to be a fair-weather approach.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

i2c: i801: Add support for Intel Comet Lake

[ Upstream commit 5cd1c56c42beb6d228cc8d4373fdc5f5ec78a5ad ]

Add PCI ID for Intel Comet Lake PCH.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

ARM: dts: pfla02: increase phy reset duration

[ Upstream commit 032f85c9360fb1a08385c584c2c4ed114b33c260 ]

Increase the reset duration to ensure correct phy functionality. The
reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
pfla02: use long enough reset for ethernet phy"):

  Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
  small percentage of modules have 'transmission timeouts' errors like

  barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
  warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
  eth0: 1000Mbps full duplex link detected
  eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout

Cc: Stefan Christ <s.christ@phytec.de>
Cc: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: 3180f956668e ("ARM: dts: Phytec imx6q pfla02 and pbab01 support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

usb: gadget: net2272: Fix net2272_dequeue()

[ Upstream commit 091dacc3cc10979ab0422f0a9f7fcc27eee97e69 ]

Restore the status of ep->stopped in function net2272_dequeue().

When the given request is not found in the endpoint queue
the function returns -EINVAL without restoring the state of
ep->stopped. Thus the endpoint keeps blocked and does not transfer
any data anymore.

This fix is only compile-tested, since we do not have a
corresponding hardware. An analogous fix was tested in the sibling
driver. See "usb: gadget: net2280: Fix net2280_dequeue()"

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

usb: gadget: net2280: Fix net2280_dequeue()

[ Upstream commit f1d3fba17cd4eeea20397f1324b7b9c69a6a935c ]

When a request must be dequeued with net2280_dequeue() e.g. due
to a device clear action and the same request is finished by the
function scan_dma_completions() then the function net2280_dequeue()
does not find the request in the following search loop and
returns the error -EINVAL without restoring the status ep->stopped.
Thus the endpoint keeps blocked and does not receive any data
anymore.
This fix restores the status and does not issue an error message.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

usb: gadget: net2280: Fix overrun of OUT messages

[ Upstream commit 9d6a54c1430647355a5e23434881b2ca3d192b48 ]

The OUT endpoint normally blocks (NAK) subsequent packets when a
short packet was received and returns an incomplete queue entry to
the gadget driver. Thereby the gadget driver can detect a short packet
when reading queue entries with a length that is not equal to a
multiple of packet size.

The start_queue() function enables receiving OUT packets regardless of
the content of the OUT FIFO. This results in a race: With the current
code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat)
& BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short
packet will be received, and then start_queue() will call
stop_out_naking(). That's what we don't want (OUT naking gets turned
off while there is data in the FIFO) because then the next driver
request might receive a mixture of old and new packets.

With the patch, this race can't occur because the FIFO's state is
tested after we know that OUT naking is already turned on, and OUT
naking is stopped only when both of the conditions are met.  This
ensures that all received data is delivered to the gadget driver,
which can detect a short packet now before new packets are appended
to the last short packet.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

usb: dwc3: pci: add support for Comet Lake PCH ID

[ Upstream commit 7ae622c978db6b2e28b4fced6ecd2a174492059d ]

This patch simply adds a new PCI Device ID

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

KVM: arm/arm64: vgic-its: Take the srcu lock when parsing the memslots

[ Upstream commit 7494cec6cb3ba7385a6a223b81906384f15aae34 ]

Calling kvm_is_visible_gfn() implies that we're parsing the memslots,
and doing this without the srcu lock is frown upon:

[12704.164532] =============================
[12704.164544] WARNING: suspicious RCU usage
[12704.164560] 5.1.0-rc1-00008-g600025238f51-dirty #16 Tainted: G        W
[12704.164573] -----------------------------
[12704.164589] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[12704.164602] other info that might help us debug this:
[12704.164616] rcu_scheduler_active = 2, debug_locks = 1
[12704.164631] 6 locks held by qemu-system-aar/13968:
[12704.164644]  #0: 000000007ebdae4f (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[12704.164691]  #1: 000000007d751022 (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[12704.164726]  #2: 00000000219d2706 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164761]  #3: 00000000a760aecd (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164794]  #4: 000000000ef8e31d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164827]  #5: 000000007a872093 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[12704.164861] stack backtrace:
[12704.164878] CPU: 2 PID: 13968 Comm: qemu-system-aar Tainted: G        W         5.1.0-rc1-00008-g600025238f51-dirty #16
[12704.164887] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[12704.164896] Call trace:
[12704.164910]  dump_backtrace+0x0/0x138
[12704.164920]  show_stack+0x24/0x30
[12704.164934]  dump_stack+0xbc/0x104
[12704.164946]  lockdep_rcu_suspicious+0xcc/0x110
[12704.164958]  gfn_to_memslot+0x174/0x190
[12704.164969]  kvm_is_visible_gfn+0x28/0x70
[12704.164980]  vgic_its_check_id.isra.0+0xec/0x1e8
[12704.164991]  vgic_its_save_tables_v0+0x1ac/0x330
[12704.165001]  vgic_its_set_attr+0x298/0x3a0
[12704.165012]  kvm_device_ioctl_attr+0x9c/0xd8
[12704.165022]  kvm_device_ioctl+0x8c/0xf8
[12704.165035]  do_vfs_ioctl+0xc8/0x960
[12704.165045]  ksys_ioctl+0x8c/0xa0
[12704.165055]  __arm64_sys_ioctl+0x28/0x38
[12704.165067]  el0_svc_common+0xd8/0x138
[12704.165078]  el0_svc_handler+0x38/0x78
[12704.165089]  el0_svc+0x8/0xc

Make sure the lock is taken when doing this.

Fixes: bf308242ab98 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

KVM: arm/arm64: vgic-its: Take the srcu lock when writing to guest memory

[ Upstream commit a6ecfb11bf37743c1ac49b266595582b107b61d4 ]

When halting a guest, QEMU flushes the virtual ITS caches, which
amounts to writing to the various tables that the guest has allocated.

When doing this, we fail to take the srcu lock, and the kernel
shouts loudly if running a lockdep kernel:

[   69.680416] =============================
[   69.680819] WARNING: suspicious RCU usage
[   69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted
[   69.682096] -----------------------------
[   69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[   69.683225]
[   69.683225] other info that might help us debug this:
[   69.683225]
[   69.683975]
[   69.683975] rcu_scheduler_active = 2, debug_locks = 1
[   69.684598] 6 locks held by qemu-system-aar/4097:
[   69.685059]  #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[   69.686087]  #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[   69.686919]  #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.687698]  #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.688475]  #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.689978]  #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.690729]
[   69.690729] stack backtrace:
[   69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18
[   69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[   69.692831] Call trace:
[   69.694072]  lockdep_rcu_suspicious+0xcc/0x110
[   69.694490]  gfn_to_memslot+0x174/0x190
[   69.694853]  kvm_write_guest+0x50/0xb0
[   69.695209]  vgic_its_save_tables_v0+0x248/0x330
[   69.695639]  vgic_its_set_attr+0x298/0x3a0
[   69.696024]  kvm_device_ioctl_attr+0x9c/0xd8
[   69.696424]  kvm_device_ioctl+0x8c/0xf8
[   69.696788]  do_vfs_ioctl+0xc8/0x960
[   69.697128]  ksys_ioctl+0x8c/0xa0
[   69.697445]  __arm64_sys_ioctl+0x28/0x38
[   69.697817]  el0_svc_common+0xd8/0x138
[   69.698173]  el0_svc_handler+0x38/0x78
[   69.698528]  el0_svc+0x8/0xc

The fix is to obviously take the srcu lock, just like we do on the
read side of things since bf308242ab98. One wonders why this wasn't
fixed at the same time, but hey...

Fixes: bf308242ab98 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

KVM: arm64: Reset the PMU in preemptible context

[ Upstream commit ebff0b0e3d3c862c16c487959db5e0d879632559 ]

We've become very cautious to now always reset the vcpu when nothing
is loaded on the physical CPU. To do so, we now disable preemption
and do a kvm_arch_vcpu_put() to make sure we have all the state
in memory (and that it won't be loaded behind out back).

This now causes issues with resetting the PMU, which calls into perf.
Perf itself uses mutexes, which clashes with the lack of preemption.
It is worth realizing that the PMU is fully emulated, and that
no PMU state is ever loaded on the physical CPU. This means we can
perfectly reset the PMU outside of the non-preemptible section.

Fixes: e761a927bc9a ("KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded")
Reported-by: Julien Grall <julien.grall@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

serial: ar933x_uart: Fix build failure with disabled console

[ Upstream commit 72ff51d8dd262d1fef25baedc2ac35116435be47 ]

Andrey has reported on OpenWrt's bug tracking system[1], that he
currently can't use ar93xx_uart as pure serial UART without console
(CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined),
because compilation ends with following error:

 ar933x_uart.c: In function 'ar933x_uart_console_write':
 ar933x_uart.c:550:14: error: 'struct uart_port' has no
                               member named 'sysrq'

So this patch moves all the code related to console handling behind
series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs.

1. https://bugs.openwrt.org/index.php?do=details&task_id=2152

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Andrey Batyiev <batyiev@gmail.com>
Reported-by: Andrey Batyiev <batyiev@gmail.com>
Tested-by: Andrey Batyiev <batyiev@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()

[ Upstream commit ac0cdb3d990108df795b676cd0d0e65ac34b2273 ]

Add the missing uart_unregister_driver() and i2c_del_driver() before return
from sc16is7xx_init() in the error handling case.

Signed-off-by: Mao Wenan <maowenan@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>