dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints

Document the constraints (number of GPIOs) for PM8226 variant.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115202.99108-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM

All the many other configs depend on config PINCTRL_MSM, yet for config
PINCTRL_SM8450 we select config PINCTRL_MSM. Make config PINCTRL_SM8450
depend on PINCTRL_MSM to be consistent with the rest.

Signed-off-by: John Garry <john.garry@huawei.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/1658829764-124936-1-git-send-email-john.garry@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sm8250: Fix PDC map

Fix the PDC mapping for SM8250, gpio39 is mapped to irq73(not irq37).

Fixes: b41efeed507a("pinctrl: qcom: sm8250: Specify PDC map.")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220803015645.22388-1-lujianhua000@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Fix an unused variable

`char *output_enable` is no longer used once switching to unicode
output.

Fixes: e8129a076a50 ("pinctrl: amd: Use unicode for debugfs output")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220801144952.141-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp

Commit e5fabbe43f3f ("pinctrl: mediatek: paris: Support generic
PIN_CONFIG_DRIVE_STRENGTH_UA") added support for using
drive-strength-microamp instead of mediatek,drive-strength-adv.

Similarly to the mt8192 and mt8195, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.

Fixes: 338e953f1bd1 ("dt-bindings: pinctrl: mt8186: add pinctrl file and binding document")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220725110702.11362-3-allen-kh.cheng@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt8186: Add gpio-line-names property

Add the 'gpio-line-names' property to mt8186-pinctrl, as this will be
used in devicetrees to describe pin names.

Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220725110702.11362-2-allen-kh.cheng@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header

Add binding header for i.MXRT1170 pinctrl device tree.

Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220723160513.271692-11-Mr.Bossman075@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Use unicode for debugfs output

The output is currently split across two lines making it more
difficult to parse unless the newlines are removed between pins
or it's read in by a parser like Libreoffice Calc or Google docs.

To make it easier to follow to the naked eye in a terminal window:
* drop the newline in the middle of pin definitions
* shorten all output using unicode characters
* align all pipe delimitters
* output the same phrase even for disabled functions
  (but with a ∅ character)

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220722220810.28894-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Fix newline declaration in debugfs output

Currently the debugfs output for pinctrl-amd puts the first line
combined with "GPIO bank".  This makes it a little harder to process
as the file needs to be manually corrected for the mistake.

Change this to be a new line character instead.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220722220810.28894-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: at91: Fix typo 'the the' in comment

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220722092419.77052-1-slark_xiao@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: st,stm32: Correct 'resets' property name

The correct property name for the reset binding is 'resets', not 'reset'.
Assuming actual users are correct, this error didn't show up due to
missing 'additionalProperties: false'. Fix the name and add missing
'additionalProperties'.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220719214955.1875020-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mvebu: Missing a blank line after declarations.

Missing a blank line after declarations.

Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220719182647.9038-1-gaoxin@cdjrlc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Add SM6375 TLMM driver

Add a driver to control the TLMM block on SM6375. This is an adapted
version of msm-5.4's pinctrl-blair driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220716192900.454653-2-konrad.dybcio@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: Add DT schema for SM6375 TLMM

Document the TLMM driver for SM6375.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220716192900.454653-1-konrad.dybcio@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples

The property mediatek,drive-strength-adv was deprecated: change the
example for i2c0-pins to use drive-strength-microamp.

Fixes: b6d9af2c6b69 ("dt-bindings: pinctrl: mt8195: Add and use drive-strength-microamp")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220715103029.204500-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"

This reverts commit 7542766e78fc374d81d8c2db214c4b4308645277.

It was noted during follow-up that the approach is incorrect.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: imx93: Add MODULE_DEVICE_TABLE()

Pass MODULE_DEVICE_TABLE() so that module autoloading can work.

This also aligns with the other i.MX8 pinctrl drivers.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Link: https://lore.kernel.org/r/20220712115154.2348971-1-festevam@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sunxi: Add driver for Allwinner D1

This SoC contains a pinctrl with a new register layout. Use the variant
parameter to set the right register offsets. This pinctrl also increases
the number of functions per pin from 8 to 16, taking advantage of all 4
bits in the mux config field (so far, only functions 0-8 and 14-15 are
used). This increases the maximum possible number of functions.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220713025233.27248-7-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sunxi: Make some layout parameters dynamic

Starting with the D1/D1s/T113 SoC, Allwinner changed the layout of the
pinctrl registers. This new layout widens the drive level field, which
affects the pull register offset and the overall bank size.

In order to support multiple register layouts, some of the layout
parameters need to be set based on the pinctrl variant. This requires
passing the pinctrl struct pointer to the register/offset calculation
functions.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-6-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sunxi: Refactor register/offset calculation

Starting with the D1/D1s/T113 SoC, Allwinner changed the layout of the
pinctrl registers. This new layout widens the drive level field, which
affects the pull register offset and the overall bank size.

As a first step to support this, combine the register and offset
calculation functions, and refactor the math to depend on one constant
for field widths instead of three. This minimizes the code size impact
of making some of the factors dynamic.

While rewriting these functions, move them to the implementation file,
since that is the only file where they are used. And make the comment
more generic, without mentioning specific offsets/sizes.

The callers are updated to expect a shifted mask, and to use consistent
terminology (reg/shift/mask/val).

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-5-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sunxi: Support the 2.5V I/O bias mode

H616 and newer SoCs feature a 2.5V I/O bias mode in addition to the
1.8V and 3.3V modes. This mode is entered by selecting the 3.3V level
and disabling the "withstand function".

H616 supports this capability on its main PIO only. A100 supports this
capability on both its PIO and R-PIO.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-4-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sunxi: Add I/O bias setting for H6 R-PIO

H6 requires I/O bias configuration on both of its PIO devices.
Previously it was only done for the main PIO.

The setting for Port L is at bit 0, so the bank calculation needs to
account for the pin base. Otherwise the wrong bit is used.

Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-3-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: Add compatible for Allwinner D1

D1 contains a pin controller similar to previous SoCs, but with some
register layout changes. It includes 6 interrupt-capable pin banks.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-2-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom-pmic-gpio: add support for PMP8074

PMP8074 has 12 GPIO-s with holes on GPIO1 and GPIO12.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220711203408.2949888-4-robimarko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074

Document the compatible for PMP8074 which has 12 GPIO-s with holes at
GPIO1 and GPIO12.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220711203408.2949888-3-robimarko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: spmi-gpio: Add pm8226 compatibility

Add support for pm8226 SPMI GPIOs. The PMIC features
8 GPIOs, with no holes inbetween.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Link: https://lore.kernel.org/r/20211125215310.62371-1-dominikkobinski314@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: core: Use device_match_of_node() helper

Instead of open coding, use device_match_of_node() helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220629115840.16241-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt8195: Add gpio-line-names property

Add the 'gpio-line-names' property to mt8195-pinctrl, as this will be
used in devicetrees to describe pin names.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220630110453.186526-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt8195: Add and use drive-strength-microamp

As was already done for MT8192 in commit b52e695324bb ("dt-bindings:
pinctrl: mt8192: Add drive-strength-microamp"), replace the custom
mediatek,drive-strength-adv property with the standardized pinconf
'drive-strength-microamp' one.

Similarly to the mt8192 counterpart, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.

Fixes: 69c3d58dc187 ("dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630131543.225554-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt8195: Fix name for mediatek,rsel-resistance-in-si-unit

When this property was introduced, it contained underscores, but
the actual code wants dashes.

Change it from mediatek,rsel_resistance_in_si_unit to
mediatek,rsel-resistance-in-si-unit.

Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630122334.216903-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: at91: remove #ifdef CONFIG_PM

Remove #ifdef CONFIG_PM and use pm_ptr() macro instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704101253.808519-2-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: at91-pio4: remove #ifdef CONFIG_PM_SLEEP

Remove #ifdef CONFIG_PM_SLEEP and use pm_sleep_ptr() macro instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704101253.808519-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: sunxi: allow vcc-pi-supply

The Allwinner H616 SoC contains a VCC_PI pin, which supplies the voltage
for GPIO port I.
Extend the range of supply port names to include vcc-pi-supply to cover
that.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220708105235.3983266-5-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: sunxi: Make interrupts optional

The R_PIO pinctrl device on the Allwinner H616 SoC does not have an
interrupt (it features only two pins).
However the binding requires at least naming one upstream interrupt,
plus the #interrupt-cells and interrupt-controller properties.

Drop the unconditional requirement for the interrupt properties, and
make them dependent on being not this particular pinctrl device.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220708105235.3983266-3-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Add pinctrl driver for MSM8909

Make it possible to control pins using the TLMM block in the MSM8909 SoC
by adding the necessary definitions for GPIOs, groups and functions.

The driver is originally taken from the msm-4.9 release [1] from Qualcomm,
but cleaned up significantly with several fixes and clarifications.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LF.UM.8.7-22500-8x09.0/drivers/pinctrl/qcom/pinctrl-msm8909.c

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220628145502.4158234-3-stephan.gerhold@kernkonzept.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: Add DT schema for qcom,msm8909-tlmm

Document the "qcom,msm8909-tlmm" compatible for the TLMM/pin control
block in the MSM8909 SoC, together with the allowed GPIOs and functions.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220628145502.4158234-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: starfive: Serialize adding groups and functions

The pinctrl dt_node_to_map method may be called in parallel which leads
us to call pinconf_generic_add_group and pinconf_generic_add_function
in parallel. This is not supported though and leads to errors, so add a
mutex to serialize these calls.

Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220627085333.1774396-1-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.20-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.20 (take two)

  - Add support for the RZ/V2M and R-Car V4H SoCs,
  - Miscellaneous fixes and improvements.

pinctrl: amd: Remove contact information

Remove contact information.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20220613064127.220416-4-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Don't save/restore interrupt status and wake status bits

Saving/restoring interrupt and wake status bits across suspend can
cause the suspend to fail if an IRQ is serviced across the
suspend cycle.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Fixes: 79d2c8bede2c ("pinctrl/amd: save pin registers over suspend/resume")
Link: https://lore.kernel.org/r/20220613064127.220416-3-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Use devm_platform_get_and_ioremap_resource

Use devm_platform_get_and_ioremap_resource() to simplify code.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20220613064127.220416-2-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-pinctrl-v5.20-1' of gitolite.pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.20-1

* Update MAINTAINERS to set the Intel pin control status to Supported
* Switch Intel pin control drivers to use struct pingroup

The following is an automated git shortlog grouped by driver:

baytrail:
 -  Switch to to embedded struct pingroup

cherryview:
 -  Switch to to embedded struct pingroup

intel:
 -  Add Intel Meteor Lake pin controller support
 -  Drop no more used members of struct intel_pingroup
 -  Switch to to embedded struct pingroup
 -  Embed struct pingroup into struct intel_pingroup

lynxpoint:
 -  Switch to to embedded struct pingroup

MAINTAINERS:
 -  Update Intel pin control to Supported

Merge branch 'ib-v5.20-amd-pinctrl':
 - Merge branch 'ib-v5.20-amd-pinctrl'

merrifield:
 -  Switch to to embedded struct pingroup

pinctrl: qcom: spmi-gpio: make the irqchip immutable

Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips.

Following this change the following warning is now observed for the SPMI
PMIC pinctrl driver:
gpio gpiochip1: (200f000.spmi:pmic@0:gpio@c000): not an immutable chip, please consider fixing it!

Fix this by making the irqchip in the SPMI PMIC pinctrl driver immutable.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220624195112.894916-1-robimarko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx

AVB1 needs MODSEL6, AVB2 needs MODSEL5 settings.
This patch adds missing MODSELx settings for the affected pins.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k08xsj81.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing MODSELx for TSN0

TSN0 needs MODSEL4 settings.
This patch adds missing MODSELx settings for the affected pins.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87letdsj8e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing ERROROUTC_A

This patch adds missing ERROROUTC_A settings.
Current existing ERROROUTC should be _B, this patch tidies it up.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtdtsj8m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing PWM

R-Car V4H has PWM/PWM_A/PWM_B, but current PFC setting is mixed.
This patch adds missing PWM settings, and tidies these up.

According to Document, GP3_14 Function4 is PWM2_A,
but we can't select it at P1SR3[27:24].
This patch just ignore it for now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7y9sj90.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing FlexRay

This patch adds missing FlexRay pins.
Because Document (Rev.0.51) has 2x FXR_TXENA/B pin with no suffix (_A, _B),
this patch names them as _X.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmipsj9a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing TPU0TOx_A

This patch adds missing TPU0TOx_A.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r135sj9j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing CANFD5_B

This patch adds missing CANFD5_B.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfnlsj9t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing SCIF1_X

This patch adds missing SCIF1_X.
Because Document (Rev.0.51) has 2x SCIF1 with no suffix (_A, _B),
this patch names it as _X.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tu81sja1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing SCIF3

R-Car V4H has SCIF3 and SCIF3_A, but current PFC setting is mixed.
This patch cleans up SCIF3/SCIF3_A, based on Rev.0.51.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8shsja7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing HSCIF1_X

This patch adds missing HSCIF1.
Because Document (Rev.0.51) has 2x HSCIF1 with no suffix (_A, _B),
this patch names it as _X.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wncxsjah.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing HSCIF3_A

This patch adds missing HSCIF3_A.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1xdsjar.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing IRQx_A/IRQx_B

This patch adds missing IRQx_A/IRQx_B, and tidies up existing IRQs.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zghtsjb4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add missing TCLKx_A/TCLKx_B/TCLKx_X

This patch adds missing TCLKx_A/TCLKx_B/TCLKx_X.

Because Document (Rev.0.51) has 2x TCLK3/TCLK4 with no suffix (_A, _B),
this patch names them as _X.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qv5txvt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Tidyup POC1 voltage

According to Rev.0.51 datasheet 004_R-CarV4H_pin_function.xlsx,
GP1_23 - GP1_28 are 1.8/3.3V.  But they are not on Table 7.28.
According to the HW team, there are no bits assigned.
This patch follows HW team's comment.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735fltxwg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Tidy up ioctrl_regs

Remove POC2 which is not documented, and remove TD0SEL3 which is not
needed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874k01txy9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Remove unused MOD_SELx definitions

Current R-Car V4H PFC code has many MOD_SELx definitions with all 0.
But these have no meaning.  This patch removes them.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ykhtxym.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Remove unused IPxSRx definitions

Current R-Car V4H PFC code has many IPxSRx definitions with all 0.
But these have no meaning.  This patch removes them.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877d4xtxyv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Remove unused NOGP definitions

Current R-Car V4H PFC code has many NOGP definitions.  But these are not
used, and they are different from original usage.  This patch removes
them.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rpdtxz8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Fixup MODSEL8

MODSEL8 controls I2C vs. GPIO modes, and the Datasheet (Rev.0.51) is
indicating that I2C needs 1.  But we should use 0 for all cases in
reality.  New Datasheet should be updated.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ttxzg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Add pins, groups and functions

This patch adds SCIF, I2C, EthernetAVB, HSCIF, MMC, QSPI, MSIOF, PWM,
CAN-FD, Ethernet-TSN, PCIe pins, groups, and functions.

This patch was created based on the Rev.0.51 datasheet.

Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: CongDang <cong.dang.xn@renesas.com>
Signed-off-by: Kazuya Mizuguch <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
[Morimoto: merged above patches into one, cleanup white space, sort modules alphabetically, fixup comments]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bku9ty0b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support

This patch adds initial pinctrl support for the R-Car V4H (R8A779G0)
SoC, including bias, drive strength and voltage control.

This patch was created based on the Rev.0.51 datasheet.

Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: Add PORT_GP_CFG_13 macros

Add PORT_GP_CFG_13() and PORT_GP_13() helper macros, to be used by the
r8a779g0 subdriver.

Based on a larger patch in the BSP by LUU HOAI.

Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5ty0r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: pinctrl: renesas,pfc: Document r8a779g0 support

Document Pin Function Controller (PFC) support for the Renesas R-Car V4H
(R8A779G0) SoC.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsjlty13.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: Add RZ/V2M pin and gpio controller driver

Add support for pin and gpio controller driver for RZ/V2M SoC.
Based on the RZ/G2L driver.

Note that the DETDO and DETMS dedicated pins are currently not
documented in the HW manual as to which pin group they are in.
HW team has since said that the output level of 1.8V I/O group 4
(for MD0-7, and debugger) is the same as the 1.8V I/O group 3.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220624084833.22605-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

dt-bindings: pinctrl: Add DT bindings for Renesas RZ/V2M pinctrl

Add device tree binding documentation and header file for Renesas
RZ/V2M pinctrl.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220624084833.22605-2-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: intel: Add Intel Meteor Lake pin controller support

This driver adds pinctrl/GPIO support for Intel Meteor Lake. The
GPIO controller is based on the next generation GPIO hardware but still
compatible with the one supported by the Intel core pinctrl/GPIO driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: axp209: Support the AXP221/AXP223/AXP809 variant

These PMICs each have 2 GPIOs with the same register layout as AXP813,
but without an ADC function. They all fall back to the AXP221 compatible
string, so only that one needs to be listed in the driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20220621034224.38995-4-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: gpio: Add AXP221/AXP223/AXP809 compatibles

These PMICs each have 2 GPIOs with the same register layout as AXP813,
but without an ADC function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220621034224.38995-2-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sc7280: Fix compile bug

Fix the compilation error, caused by updating constant variable.
Hence remove redundant constant variable, which is no more useful
as per new design.

The issue is due to some unstaged changes. Fix it up.

Fixes: 36fe26843d6d ("pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets")

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1656489290-20881-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: renesas: r8a779f0: Remove unused POC2

The POWER Condition Control Register 2 (POC2) is unused, and the
documentation does not define any valid bits.  Remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d8a9ea39b49d24e39f4da3f00b64bce34016887d.1655301529.git.geert+renesas@glider.be

dt-bindings: pinctrl: renesas: Remove spaces before #define

Remove spaces at the beginning of lines with #defines.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/5188ef93a911ce3781b16530fdebbf0f0af462b6.1655301264.git.geert+renesas@glider.be

dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name

gpio-keys schema requires keys to have more generic name.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220616005333.18491-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt8192: Add RSEL values to bias-pull-{up,down}

Commit fe44e4984018 ("pinctrl: mediatek: add rsel setting on mt8192")
added RSEL bias type definition for some pins on mt8192. In order to be
able to configure the bias on those pins, add the RSEL values in the
bias-pull-up and bias-pull-down properties in the binding.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220627173209.604400-1-nfraprado@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: samsung: do not use bindings header with constants

The Samsung SoC pin controller driver uses only three defines from the
bindings header with pin configuration register values, which proves
the point that this header is not a proper bindings-type abstraction
layer with IDs.

Define the needed register values directly in the driver and stop using
the bindings header.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220605160508.134075-8-krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20220624081022.32384-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: aspeed: Fix typo in comment

Delete the redundant word 'and'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20220618130854.12321-1-wangxiang@cdjrlc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ingenic: Convert to immutable irq chip

Update the driver to use an immutable IRQ chip to fix this warning:

    "not an immutable chip, please consider fixing it!"

Preserve per-chip labels by adding an ->irq_print_chip() callback.

Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220622185010.2022515-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ingenic: Use irqd_to_hwirq()

Instead of accessing ->hwirq directly, use irqd_to_hwirq().

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220622185010.2022515-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: pinctrl-zynqmp: Fix kernel-doc warning

Fix the below kernel-doc warning by adding the description for return
value.
"warning: No description found for return value of
'zynqmp_pmux_get_function_groups'".

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1655462819-28801-5-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance

Add support to handle 'output-enable' and 'bias-high-impedance'
configurations. As part of the output-enable configuration, ZynqMP pinctrl
driver takes care of removing the pins from tri-state.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1655462819-28801-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl-zynqmp: Add output-enable configuration

Add 'output-enable' configuration parameter to the properties list.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1655462819-28801-3-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

firmware: xilinx: Add configuration values for tri-state

Add configuration values(enable/disable) for tri-state parameter.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1655462819-28801-2-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ocelot: allow building as a module

Set PINCTRL_OCELOT config option as a tristate and add
MODULE_DEVICE_TABLE()/MODULE_LICENSE() to export appropriate
information. Moreover, switch from builtin_platform_driver()
to module_platform_driver().

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20220617103548.490092-1-clement.leger@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sc7280: Fix compile bug

The idea was right but the code was breaking in next.
I assume some unstaged commit was involed. Fix it up.

Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Fixes: 36fe26843d6d ("pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.20-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.20

  - Fix reporting of input disabled pins on RZ/G2L.

pinctrl: mediatek: mt8192: Fix compile warnings

After applying patches I get these warnings:

  drivers/pinctrl/mediatek/pinctrl-mt8192.c:1302:56:
  warning: "/*" within comment [-Wcomment]
  drivers/pinctrl/mediatek/pinctrl-mt8192.c:1362:56:
  warning: "/*" within comment [-Wcomment]

Something is wrong with the missing end-slashes. Add them.

Cc: Guodong Liu <guodong.liu@mediatek.com>
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: fix the pinconf definition of some GPIO pins

Remove pin definitions that do not support the R0 & R1 pinconfig property.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-6-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: dropping original advanced drive configuration function

Function bias_combo getter/setters already handle all cases advanced drive
configuration, include drive for I2C related pins.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-5-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: add rsel setting on mt8192

1. I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on mt8192.
2. Also add the missing pull type array for mt8192 to document the
pull type of each pin and prevent invalid pull type settings.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-4-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: add drive for I2C related pins on mt8192

This patch provides the advanced drive raw data setting version
for I2C used pins on mt8192.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-3-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: add generic driving setup property on mt8192

1. The dt-binding expects that drive-strength arguments be passed
in mA, but the driver was expecting raw values. And that this
commit changes the driver so that it is aligned with the binding.
2. This commit provides generic driving setup, which support
2/4/6/8/10/12/14/16mA driving, original driver just set raw data
setup setting when use drive-strength property.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-2-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm2835: Make the irqchip immutable

Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. The bcm2835 pinctrl is also affected by this
warning.

Fix this by making the irqchip in the bcm2835 pinctrl driver immutable.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm2835: drop irq_enable/disable callbacks

The commit b8a19382ac62 ("pinctrl: bcm2835: Fix support for threaded level
triggered IRQs") assigned the irq_mask/unmask callbacks with the
already existing functions for irq_enable/disable. The wasn't completely
the right way (tm) to fix the issue, because these callbacks shouldn't
be identical. So fix this by rename the functions to represent their
intension and drop the unnecessary irq_enable/disable assigment.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

MAINTAINERS: add include/dt-bindings/pinctrl to PIN CONTROL SUBSYSTEM

Maintainers of the directory Documentation/devicetree/bindings/pinctrl
are also the maintainers of the corresponding directory
include/dt-bindings/pinctrl.

Add the file entry for include/dt-bindings/pinctrl to the appropriate
section in MAINTAINERS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613122955.20714-1-lukas.bulwahn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed

GPIO 31, 32 can be muxed to GCC_CAMSS_GP(1,2)_CLK respectively but the
function was never assigned to the pingroup (even though the function
exists already).

Add this mode to the related pins.

Fixes: 5373a2c5abb6 ("pinctrl: qcom: Add msm8916 pinctrl driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220612145955.385787-4-nikita@trvn.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets

Update lpass lpi pin control driver, with clock optional check for ADSP
disabled platforms. This check required for distingushing ADSP based
platforms and ADSP bypass platforms.
In case of ADSP enabled platforms, where audio is routed through ADSP
macro and decodec GDSC Switches are triggered as clocks by pinctrl
driver and ADSP firmware controls them. So It's mandatory to enable
them in ADSP based solutions.
In case of ADSP bypass platforms clock voting is optional as these macro
and dcodec GDSC switches are maintained as power domains and operated from
lpass clock drivers.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom: sc7280: Add boolean param for ADSP bypass platforms

Add boolean param qcom,adsp-bypass-mode to support adsp bypassed sc7280
platforms. Which is required to make clock voting as optional for ADSP
bypass platforms.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: intel: Drop no more used members of struct intel_pingroup

There are no more used members in the struct intel_pingroup, drop them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>